Wintal DVD Player DVD DVB T Combo Player User Manual

DVD/DVB-T COMBO PLAYER

PDVDX100S/PDVDX100B

INSTRUCTION BOOK

Please read this IB carefully to get the best performance from this player.

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY INFORMATION

Dear customer:

We take this opportunity to thank you for purchasing this DVD/CD/DivX player with built-in Digital

Terrestrial Receiver. We strongly recommend that you study carefully the operation instruction before

attempting to operate the unit and that you have noted the list precautions.

Note:

This unit can be used only where the power supply is 240V,50Hz, it can’t be used elsewhere.

Caution

ꢀ DVD/DVB IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/CD PLAYER USES A VISIBLE

LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE

SURE TO OPERATE THE DVD/CD PLAYER CORRECTLY AS INSTRUCTED WITHOUT OPENING

CABINET AND LOADER COVER.

ꢀ WHEN THIS PLAYER IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE

TOTHEOPENINGOFTHEDISCTRAYANDOTHEROPENINGSTOLOOKINTOTHEINSIDEOFTHE

PLAYER.

ꢀ WHEN THISPLAYER ISPLUGGED INTOTHEWALL OUTLET, DONOTREMOVE THEPROTECTIVE

CAP ON THE OPTICAL OUTPUT SCART. RED BEAM SENDS OUT TO HARM YOUR EYES ESPE-

CIALLYFORCHILDRENWHENYOULOOKATOPTICALOUTPUTTEMINAL.PUTONTHEPROTEC-

TIVE CAP WHEN THE SCART IS IDLE.

ꢀ RADIOACTIVE DANGER MAY BE CAUSED IF YOU DO NOT FOLLOW THE METHOD STIPULATED

HEREFORTHEOPERATION,ADJUSTMENTORCONTROL.

ꢀ PLEASECONSIGNTHEMAINTENANCETOTHEPROFESSIONALTECHNICIAN.

Warning:

ꢀ To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.

ꢀ To reduce the risk of fire or electric shock, and annoying interference, use the recommended

accessories.

Copy Protection

This DVD player supports Macrovision copy protection. On DVD disc that include a copy protection

code, if the contents of the DVD disc are copied using a VCR, the copy protection code prevents the

videotape copy from playing normally.

This product incorporates copyright protection technology that is protected by U.S. patents and

other intellectual property rights. Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing uses only unless otherwise autho-

rized by Macrovision. Reverse engineering or disassembly is prohibited.

Official DivX Certified^TMproduct.

Plays DivX^®5, DivX^®4, DivX^®3, and DivX^®VOD video content (in compliance with DivX Certified^TM

Technical requirements)

U.S Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; and 6,516,132.

-3-

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions

Features

Power cord protection

not place anything heavy on it.

To avoid any malfunctions of the unit, and to pro-

tect against electric shock, fire or personal injury,

please observe the following.

ꢀ Do not place the unit on amplifiers or other

equipment, which may become hot.

ꢀ Minimum distances around the apparatus for

sufficient ventilation.

ꢀ Hold the plug firmly when connecting or dis-

connecting the AC power cord to this unit.

ꢀ Do not connect or disconnect the AC power

when your hands are wet.

ꢀ The ventilation should not be impeded by cov-

ering the ventilation openings with items, such

as newspaper, table-cloths, curtains, etc.

ꢀ No naked flame sources, such as lighted

candles, should be placed on the apparatus.

ꢀ This apparatus shall not be exposed to drip-

ping and splashing.

ꢀ Keep the AC power cord away from heating

appliances.

ꢀ Never put any heavy object on the AC power

cord

ꢀ Do not attempt to repair or reconstruct the AC

power cord in any way.

ꢀ Socket outlet for connecting the mains plug

should be easily accessible and remain readily

operable.

ꢀ Remove dust, dirt, etc. on the plug at regular

intervals.

ꢀ If the unit has been dropped or otherwise

damaged, turn off the power and disconnect

the AC power cord.

Features

DVD section

ꢀ If you find smoke, bad smells or noises are

emitted from the unit, turn off the power and

disconnect the AC power cord.

DVD a completely new dimension in video

entertainment

ꢀ Subtitles may be displayed in one of a maxi-

mum of 32 languages available (multi-subtitles

DVD only)

Placement

Avoid placing the unit in areas of:

ꢀ Direct sunlight or heating radiators, or closed

automobiles.

ꢀ Audio soundtrack can be heard in up to 8 lan-

guages (multi-languages DVD only).

ꢀ Multi-angle function allows you to choose the

viewing angles of scene (for DVD with mul-

tiple camera angles only).

ꢀ High temperature (over 35°C) or high humidity

(over 90%)

ꢀ Excessive dust

ꢀ Strong magnetic or static electricity place.

ꢀ Vibration, impact or where the surface is titled.

Otherwise the internal parts may be damaged.

High quality digital audio

ꢀ The AC-3/MPEG2 audio/Linear PCM decoder

is built into the player which makes it possible

to have Multi-Channel Surround sound.

Non-use Periods

ꢀ Switch the unit to standby status or turn off

the power when the unit is not being used.

ꢀ It should be unplugged from the household AC

outlet when the unit is idle for a long period of

time.

Other convenient features

ꢀ Parental lock settings to prevent playing un-

suitable discs for some audiences (DVD only).

ꢀ A full function remote control provides quick

access to DVD functions.

ꢀ 5.1CH or 2CH output.

No fingers or other objects inside

ꢀ Video output modes: CVBS, YUV and YPbPr,

Supports 16:9 wide screen mode.

ꢀ Touching internal parts of this unit is dangerous,

and may cause serious damage to the unit.

ꢀ Do not attempt to disassemble this unit.

ꢀ Compatible with both PAL and NTSC systems.

ꢀ Supports DTS decoding.

ꢀ Digital audio output: COAXIAL and OPTICAL

output. Supports RAW (digital audio) and PCM.

ꢀ Input and Output for stereo (analogue).

ꢀ Programmed playback, bookmark, zoom in/out

and rotation of JPEG pictures. Status memory

for discs.

Keep away from water and magnets

ꢀ Keep the unit away from flower vases, tubs,

sinks, etc. If liquids are spilled into the unit,

serious damage could occur.

ꢀ Never bring magnetic objects such as speak-

ers near the unit.

ꢀ Operate pictures interface

ꢀ Disc rating lock function

Stacking

ꢀ Place the unit in a horizontal position, and do

-4-

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

ꢀ Full function remote control.

ꢀ Intelligent software update.

Compatible with PAL DVD and NTSC DVD

ꢀ This player can play discs recorded in either

PAL or NTSC system. However, the player

must be connected to a multi-system TV to

play both PAL DVD and NTSC DVD. The use of

a multi-system TV is recommended and set

the video output of this player as AUTO in the

video setup.

Compatible with CD and DVD

ꢀ This player could play various discs such as

DVD, CD (8cm/12cm discs).

ꢀ This player can play DIVX format movies such

as DivX3.11, DivX4+, DivX5+

Note: DIVX discs with bit rate above 1Mbps

may not be played normally.

DVB section

ꢀ MPEG-2 / DVB-T compatible

ꢀ Bandwidth 7MHz or 8MHz optional

ꢀ Electricity broken memory, resume

automatically.

ꢀ Multi-subtitle

ꢀ Manual/Auto scan

ꢀ Support OSD & VBI teletext

ꢀ SCPC/MCPCcompatible

ꢀ Electron Program Guide (EPG)

ꢀ User-friend interface

-5-

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

ACCESSORIES

Remote control

one piece

two pieces

one piece

Instruction Book

Batteries

Customer Care Centre Sheet

3 Pin AV Cable

Front panel reference

Power button

SKIP-/CH- button

VFD display

DVD/DVB switch button

PLAY/PAUSE button

STANDBY LED

Remote control sensor

Disc tray

10. STOP button

11. SKIP+/CH+ button

OPEN/CLOSEbutton

-6-

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear panel reference

1. 5.1 CH SUBWOOFER output jack

2. 5.1 CH SR output jack

3. 5.1 CH FR output jack

4. Optical output jack

5. S-video output jack only for DVD player

6. Chromatic aberration signal Y-axis output jack only for DVD player

7. Video output

8. Chromatic aberration signal Cr/Proutput jack only for DVD player

9. Chromatic aberration signal Cb/Pb output jack only for DVD player

10. Coaxial output jack

11. 5.1CH FL output jack

12. 5.1CH SL output jack

13. 5.1CH CENTER output jack

14. RFIN

15. RFOUT

16. AC power cord

Remarks: For STB video output, only use video out put (yellow connector).

NOTE:

Please unplug and keep the power cord orderly when the unit is idle for a long time in order to avoid

electricity leak and shock resulted from scratched power cord.

-7-

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Reference

1. STANDBY button

2. ANGLE button

3. AUDIO button

4. EXIT/VIDEOOUT

5. INFO/DISPLAY button

6. ꢀ, ꢁ, ꢂ, ꢃ, OK buttons

7. GREENbutton

8. RED button

9. MUTE button

10. SUBTITLE button

11. VOL+ / - button

12. ZOOM button

13. SKIP+ button

14. SKIP- button

15. F.RWD button

16. F.FWD button

17. STOP button

18. PAUSE/STEPbutton

19. PLAY button

20. SLOW button

21. A-B button

22. MODE button

23. MARK button

24. LAST/PROGRAM button

25. PG+ button

26. TV/R/MENU button

27. PG- button

28. TTX/TITLE button

29. Favorite Function button (BLUE)

30. Favorite Function button (YELLOW)

31. SETUP button

32. Favorite Function button (WHITE)

33. NUMBER (1-9, 0) button

34. SEARCH -/—/— button

35. OPEN/CLOSEbutton

36. DVD/DVB button

37. CLEAR/EPG button

NOTE:

1. The same buttons on remote control and front

panel have the same function.

2. Favorite Function button , Please refer to the

indication exact operation abut the button.

-8-

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

VFD reference

1. Shows when playing DVD discs

2. Shows DVB when the unit is at the DVB mode

3. Shows DVB-T

4. Shows MP3 when playing MP3

5. Shows second

6. Shows minute

7. Shows hour

8. Shows chapter/track number

9. Shows pause symbol when pausing the playback

10. Shows playback symbol

11. Shows rotating playback

12. Shows timer when timer is setup

13. Shows CD when playing CD discs

-9-

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

BASICCONNECTION

ꢁ Ensure that the power switch of this unit and

other equipment to be connected is turned off

before commencing connection

ꢁ Read through the instructions before connect-

ing other equipment

ꢁ Ensure that you observe the color-coding

when connecting audio and video cords

ꢁ Please use only one kind of connection with

TV set for the unit and choose correct video

output setting, otherwise there may be image

distortion.

ture output.

3. Consumers should note that not all high defini-

tion television sets are fully compatible with

this product and may cause artefacts to be

displayed in the picture. In case of 525 or 625

progressive scan picture problems, it is rec-

ommended that the user switch the connec-

tion to the ‘standard definition’ output.

Relative Setup

ꢁ When using 2ch output to connect TV or audio

equipment, please set submenu of Analog Out

under the menu of Audio Setup as 2 channels.

DVD player part Connection

A: Connecting to TV set w/AV input jack

TV set (optional)

DVD/DVB-T Combo player

3.4. S-Video cord (optional), to S-Video input

connector

5.6.7. Video/Audio cord (optional), to TV video/

audio input connector

Power cord

B: Connecting to a stereo TV set

TV set (optional)

DVD/DVB-T Combo player

3.4. Audio cord, to TV audio input connector

5. 6.7. To the corresponding Y Pb/Cb Pr/Cr VIDEO

IN jack on the TV. (green, blue, red).

Video cord, To TV video input connector

To get better viewing quality, you are advised

using S-video cord to connect the TV set with

CVBS input meanwhile changing the TV set to S-

video input format. The TV set with Y, Cb, Cr input

can get more clear picture and realistic image

when it connects to Y, Cb, Cr output jacks of this

player. The Video out setting must be set as YUV

if you use Y, Cb, Cr output.

If your TV has “Y Pb Pr” function (progressive

scan function), you can use this unit’s progres-

sive scan output by using Y Pb Pr output jacks &

setting the player’s VIDEO OUT as Y Pb Pr.

Note:

1. Choose below speaker size setting in the set-

ting “Audio” menu if you use the TV speakers:

Front: Large, Center/Rear/Subwoofer: Off. At

this setting situation which is Stereo effect,

the signal from Audio output L, R is the same

as the FL & FR output, also same as the audio

signal from Scart jack.

2. Only one kind of connection to TV set can be

made. If your TV set doesn’t support “Y Pb Pr”

function, don’t switch the VIDEO OUT to Y Pb

Pr of the unit, otherwise there will be no pic-

-10-

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

BASICCONNECTION

C: Connection to audio system

DVD/DVB Combo Player

Audio system (optional)

Audio cords

Coaxial cable, to the audio system coaxial

input connector

Optical cable, to the audio system optical

input connector

To center audio input connector

To audio input connector (subwoofer, sur-

round left, surround right, front left, front

right).

Regarding the audio system connection to

other unit, please kindly refer to the audio

system instruction manual.

Relative setup

ꢁ According to your audio system, it is ok that

you connect any of point 3/4/5.

ꢁ When using 5.1ch analog to connect the audio

system, please set the submenu of analog out

under the menu of audio setup as 5.1 channel

Coaxial Digital Output Notice

ꢁ Do not connect this unit’s coaxial digital output

to the amplifier which does not have AC-3 or

MPEG2. Otherwise it will cause extreme high

level noise and damage to your listening.

Optical Digital Output Notice

ꢁ Take out the optical digital output protective

cap, and insert the optical cable into the unit’s

optical output hole and amplifier’s optical input

connector. Keep the protective cap well when

non-use. Put the protective cap onto optical

output in avoid of any damage to the eyes.

-11-

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

DVB-T Connection Part

A: Connection to TV and antenna

1. TV Set (optional)

2. Power cord

3. Video cable (optional)

4.5. Audio cords, to TV FL, FR audio input Con-

nectors (optional)

6. Antenna (optional)

Note:

YPrPb and S-video output only for DVD player.

B: Connection to TV and another DVB-T

Receiver

1. TV set (Optional)

2. Antenna (Optional)

3. Video cable (optional)

4.5. Audio cords, to TV FL, FR audio input

6. DVD/DVB Combo Player (optional)

7. Power cord

-12-

PDVDX100S-100B-im.p65

06-5-16, 11:30

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL PREPARATION

Battery Installation

Insert the batteries while observing the positive

(+) and negative (-) polarities as Figure A

Service life of batteries

ꢁ The batteries normally last for a year although

this depends on the operation and on how

often the remote control is used.

ꢁ If the remote control unit fails to work even

when it is operated near the player, replace

the batteries with new ones.

ꢁ Use size AAA UM-4 batteries (2 pieces)

Notes:

Do not use rechargeable (Ni-Cd) batteries

ꢁ Do not attempt to recharge, short circuit,

disassemble, heat or throw the batteries into

fire

ꢁ Do not drop, step on the remote control, other-

wise it may damage the parts or lead to mal-

functioning

ꢁ Do not mix old and new batteries

ꢁ If the remote control is not going to be used for

a long time, remove the batteries. Otherwise,

electrolyte may leak and lead to malfunctioning

or even burns by electrolyte

ꢁ Wipe away any electrolyte leaking inside the

remote control, and install new batteries

ꢁ If the leaking electrolyte has contact with some

parts of your body, wash it off thoroughly with

water.

Remote control operation range

ꢁ The operation range of the remote control is

no more than 5m from and within about 60

degree of the front of the unit.(Figure B)

ꢁ The operating distance may vary according to

the brightness of the room

Note:

ꢁ Do not point bright lights to the remote control

sensor

ꢁ Do not place objects between the remote con-

trol and the remote control sensor

ꢁ Do not use this remote control together with

the remote control of any other equipment.

-13-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

DVD PLAYER OPERATION PART

PLAY again, and play will resume from this point.

Press STOP button twice, RESUME function will

be cancelled. RESUME function is suitable for discs

showing playing time during playback.

ꢁ The option of display language catalog is pre-

set to English. Please refer to Setup operation

ꢁ Most of functions are operated by remote

control. Either operation of remote control and

front panel is effected when their buttons indi-

cate the same function

DivX discs have no such function.

SKIP-/SKIP+

Press SKIP-/SKIP+ button on remote control dur-

ing playback. A chapter (DVD) or a track (CD) is

skipped back or ahead correspondingly each time

the button is pressed.

Preparation

ꢁ Turn the TV on and select AV as the TV input

ꢁ Switch on the stereo system power if the

player has been connected to stereo system.

Note: some of buttons will have double

function. Please refer to DVB PART for those

buttons with DVB operation function.

Note: SKIP-/+ buttons works as Page down/up in

MP3/DivX/JPEG CD playing menus.

F.FWD/F.RWD

Press F.FWD/F.RWD button on the remote control

during playback and the unit will enter fast

forward/reverse status. There are 4 speeds of

fast forward (reverse) available: x2, x4, x8, x20.

To return to normal play, press PLAY button on

player or remote control again.

STANDBY

When you press the buttons, the player will switch

to Standby status. When pressed again, the player

is returned to normal working status.

Note: should you not wish to use the player,

please switch off the power by pressing the

power button

Note:

1. Some discs have no such function.

2. For DIVX discs, if the played file is too small,

the speed levels of fast forward (reverse)

will only have x2 or x4.

DVD player playback operation

This unit default status is DVB status. Please kindly

push DVD/DVB button to switch into the DVD

status.

SLOW

Press SLOW button on the remote control during

playback and the unit will enter slow forward/

reverse status. There are 4 speeds available: 1/

2, 1/4, 1/6, 1/7. To return to normal play, press

PLAY button on player or remote control again.

Note: Some discs have no such function

PLAY

1. Push power button on the unit, and it displays

LOAD on the VFD which indicates normal

power supply.

(Note: The disc information appears after sev-

eral seconds if there is a disc after LOAD dis-

played otherwise appears NO DISC)

2. Press OPEN/CLOSE button to open disc tray.

OPEN will be indicated on the left upper of TV

screen.

3. Place a disc (8cm or 12cm) into the tray. (For

one- sided disc, position it with printed title

side facing up. For two-sided disc, position

side to be playback facing down)

4. Press OPEN/CLOSE again to close disc tray

CLOSE will display on the left upper of TV

screen, then shows “Reading” and “Loading”

will display on the VFD screen.

PAUSE/STEP

Press PAUSE/STEP button during playback, the

player will enter pause mode. If the button is

pressed again, the disc is advanced by one frame

(step). When the button is kept pressed, con-

secutive frame advance works. To return to nor-

mal play, press PLAY button.

Note: Some discs have no such function.

NOTE: During the playing of the introduction of a

movie, PAUSE/STEP, F.FWD, F.RWD, SLOW, SKIP-

/ SKIP+ may be ineffective.

5. Press PLAY to playback disc. You may oper-

ate according to MENU indication after MENU

shows on the screen then press OK button to

playback. Some discs can play automatically

after loaded.

NUMBER (0-9, 0/10 button)

Press Number (0-9, 0/10) button and press OK

button allows you to directly access any desired

track while a disc is playing.

Note: Some discs have no such function.

STOP

Press STOP button to stop playing. When play-

back is stopped, the unit records the point where

STOP was pressed (RESUME function). Press

MUTE

Press MUTE button during playback, the player

shows mute picture and there is no audio output

-14-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

(silence), press again to cancel MUTE. And press-

ing VOL+ or VOL can cancel MUTE also.

PROGRAM

Press STOP button first then press PRG button,

the program playback screen appears on the TV

set. 12 tracks (CD) or chapters (DVD) can be

programmed. Use NUMBER button to input your

preferred track (CD) or chapter (DVD) when the

blue cursor flashes on the position1. Note: When

programming a DVD disc, you must input title num-

ber ahead of “:”and chapter number after it. It is

invalid to input the number larger than available.

Then press direction button (UP, DOWN, LEFT,

RIGHT) down to remove blue cursor to position 2.

Use the same procedure to program your pre-

ferred track or chapter. Use CLR button and enter

a new number to amend false or unsatisfied pro-

gram through direction button. After you have se-

lected all your preferred title/chapter(s) or track

(s), press OK button or just press PLAY button to

start program play.

VOL+/VOL-

Press VOL+/VOL- button during playback may

change volume for audio output

Note:

1. The volume is set as largest initially.

2. VOL+/VOL- button will lose function when

using this digital output.

DISPLAY

Press DISPLAY button during play to show the

disc’s relevant information on TV screen.

ZOOM

Press ZOOM button during playback or pause to

zoom up the current picture. There are 3 levels of

zoom available (x1, x2, x3). Press continuously

to Q off to resume normal playing.

Note: Some discs have no such function or have

only x1 or x2.

Note:

1. Some discs have no program function.

2. No Search function during programming

playing.

A-B REPEAT

Press A-B button during playback at the point

where repeat play is to commence (a) then press

again at the point where repeat play is to be con-

cluded (B). Repeat playback between point (A)

and point (B) starts.

MARK

Press MARK button on remote control while the

disc is playing and the menu of mark setting with

bookmarks will appear on the screen. Press “OK”

button to set the playing times where you would

like to view as mark. Once mark were set, press

OK button to play from the mark. Press “CLR”

button to clear a particular mark .A maximum of

three marks can be stored.

Press A-B button once more where TV screen

appears “REP OFF”

Note: Some DVD discs and all MP3, DIVX discs

have no such function.

MODE

Note:

Press MODE button during the playing to choose

different REPEAT modes.

1. All the marks are cleared when the power is

off or the disc is removed.

Under DVD discs playback status, there are three

options available: Chapter/Title/Off.

Under CD discs playback status, there are three

options available: Single/All/Off.

Note: Some discs and cards have no such

function.

2. Some discs including MP3, JPEG, DivX have

no such function.

VIDEO-OUT

This button provides you easy access to this unit’s

video output without need to enter SETUP menu.

Press continuously, it changes to following out-

put signals in turn: CVBS, YUV, YPbPr.

ANGLE

Press ANGLE continuously during playback of

DVD disc to toggle the disc between available

angles recorded on the disc if the disc has multi-

angle function.

When you play a DVD disc, press the “SEARCH”

button and “Time/Title / Chapter” will appear on

the screen. Use the number buttons/direction but-

ton to set chapter or title. Press the OK button to

start playing from the selected point. Press

SEARCH button once again, it will cancel SEARCH

playback.

AUDIO

Press AUDIO button during playback to toggle

between available audio languages recorded on

the disc if the disc has this multi-language function.

Note: Press AUDIO button could toggle available

audio language soundtracks.

Note: Some discs have no search function.

-15-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

1. Playback Menu

TITLE (DVD only)

Main root: Use direction button to select the

submenu, and press OK button to enter the file

you prefer.

For DVD discs, press TTX/TITLE button on remote

control during playback, a list of titles of the disc

(depends on discs) will be displayed on TV set.

Use direction button or number button to select

your preferred title then press “OK” button to con-

firm and start playing from the selected point.

In the submenu press Left button to return to

previous menu; You must press STOP button

to return to menu interface when playback the

current tracks or pictures.

2. Playback Mode

Press TV/R/MENU button on remote control dur-

ing playback discs, a list of menus on the disc

(depends on discs) will be displayed on TV set.

Use direction or number button to select your pre-

ferred items then press OK button to confirm and

start playing from the selected point. (DVD discs

only)

Press STOP button and use direction button

“ꢃ” to select play mode When MP3, JPEG,

WMA, DIVX discs are playing status. Then

press SELECT button to shift 9 modes: NOR-

MALFILEMODE,REPEATFILE,BROWSEDISC,

NORMALDISCMODE,REPEATDISC,SHUFFLE

MODE,STARTPROGRAM,PLAYBACKSINGLE

SONG, REPEAT SINGLE SONG. After selected

play mode, then pressing ꢀ to select tracks, it

will be play when pressing PLAY or SELECT

button again

SUBTITLE

Press SUBTITLE button on remote control during

playback. “Subtitle: [1]” will be displayed on TV

set that means a kind of language. Press once

more, “Subtitle: [2]” appeared on TV set means

another kind of language and accordingly sub-

titles appear that represents how many kinds of

language being selected. “Subtitle: [OFF]” appears

that toggle subtitle.

Note: Press F.FWD/F.RWD is invalid When

select file or playing tracks, pictures, pressing

SKIP+./- can up or down to play the tracks, but

it is invalid for the main menu.

Note: This function is valid for DVD discs with

multi-subtitle only.

3. Playing MP3, DIVX,

No search, F.FWD/F.RWD, bookmark function

when playing MP3, DivX discs; Use the num-

ber button directly select the tracks to playback.

CLEAR

When setting a program or searching, you need

to input a number. Press CLR button to clear the

number when the input number is incorrect.

4. Playing JPEG disc

After enter to JPEG pictures mode from play

menu, there are some operations as below:

Press TITLE button to browse with 9 pictures.

Press SKIP+ button to play the next picture

Press SKIP- button to play the previous picture

Press PAUSE/STEP button to pause playing,

and pressing the PLAY button to continue

playing.

DVD/DVB

Press DVD/DVB button to switch the working sta-

tus between DVB and DVD.

Note: this unit’s default working status is DVB.

SETUP

Press SETUP button on the remote control and

access to setup interface. Then you can setup

the menu of Language Setup, Screen Setup, Au-

dio Setup and Custom Setup. Use direction cur-

sor to highlight the option, press the OK button ton

enter the next level setup interface.

Pressing ZOOM button enter to zoom pictures,

its have 6-levels available: 4/3, 3/2, x2, 1/2, 3/

4, OFF.

Press ANGLE/Direction button (up, left, right)

can rotate the pictures, its there are 4-levels

are available: NORMAL/90/180/270.

Press Direction button to rotate the picture 180

degree with clockwise.

Playback MP3/JPEG /DivX/JPEG

Note: The reading time of JPEG picture CD

formatted discs may vary due to the level of

content. Please allow more time for highly for-

matted discs.

Folder / file list window

Main window

Mode

Folder normal

Note: some characters of folder/file names may

not be displayed normally.

-16-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD PLAYER Setup Interface

Menu, Submenu and Options SHEET

Menu Submenu

Options

English

French

Spanish

English

French

Spanish

Auto

Description

English On Screen Display

French On Screen Display

Spanish On Screen Display

English subtitle

French subtitle

Spanish subtitle

OSD Menu

Subtitle

Automatically Display Subtitle

Turn off the subtitle

Off

English

French

Spanish

English

French

Spanish

4:3 Letter Box

4:3 Pan Scan

16:9

English audio language

French audio language

Spanish audio language

English DVD menu

French DVD menu

Spanish DVD menu

Set TV screen at 4:3 Letter Box

Set TV at screen 4:3 Pan Scan

Set TV at screen16:9

Audio

DVD Menu

Screen Format

NTSC

PAL

Auto

CVBS

Set TV system as NTSC

Set TV system as PAL

Let TV choose system automatically

Set video output as CVBS

Set video output as YUV

Set video output as Y Pb Pr

TV System

Video output

YUV

Y Pb Pr

Large/Small

Large/Small/Off

Front Speakers

Center Speaker

Large means full frequency speaker; SMALL means

medium high frequency speaker which can not perform

ultra low frequency. Please choose the right setting as per

your speaker characteristic & your preference. When you

connect this player to your TV set, which is so-called

DOWNMIX stereo effect, please set Front as LARGE and

Center, Surround, subwoofer as OFF; otherwise it will not

be audible or only very quiet.

Surround Speakers Large/Small/Off

Subwoofer

On/Off

Off

PCM

Raw

Off

Turn on the Pro logic function

Turn off the Pro logic function

Output digital signal in PCM

Output Raw digital signal

Turn off AC-3 5.1 output

Pro Logic

Digital Out

Pink noise

OFF/Left/Center/Right/

Left Surr/Right

Surr/Subwoofer

Test respective speaker output

CNTR CTRL

REAR CTRL

Password

0,1,2,3,4,5 ms

0,3,6,9,12,15 ms

Adjust the center control within in 0-5ms

Adjust the rear control within 0-15ms

Input number by users and confirmed by OK button

General Audiences (All Ages Admitted)

Parents Strongly Cautioned, Some material may be

inappropriate for children under 13

For adult only

Rating

PG-13

Adult

-17-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

DVB Operation Part:

Fast installation operation:

Connect this unit and other equipments according to “BASIC CONNECTION”

1. Power on the POWER switch on front panel.

2. Press SETUP button, then enter into the SETUP menu, restore the factory setup.(You should operate

this item if this unit is used for the first time or the software has been upgraded.)

3. Enter into the SCAN menu, Scan Type and choose AUTO SCAN, press OK button to start automati-

cally scan.

4. After scanning, useꢀꢁbutton to choose a program channel.

See the following instructions for the details.

Main operation:

Remote control operating instruction:

ꢁ EPG: Press CLEAR/EPG button to show the EPG information of the current service (if the current

service support).

ꢁ TTX: Press TTX/TITLE button to show the teletext information of the current service (if the current

service support).

ꢁ SUB:Press this button to change different languages on the screen (if the current service support).

If you want to turn off the subtitle, please press this button again.

ꢁ INFO: Press INFO/DISPLAY button to show the information of the current service

ꢁ TV/R: Press TV/R/MENU button to turn or off TV/R channels.

ꢁ RED, GREEN, YELLOW, BLUE, WHITE: these buttons are used for the function operation.

ꢁ LAST: Press LAST/PROGRAM button to return to the last service

ꢁ AUDIO: Press this button to change different languages and shift the audio channel between

Stereo/Left channel/Right channel

ꢁ MUTE: Press this button turn on or off mute.

ꢁ STANDBY: Press this button to enter to STANDBY status, press again to return to working status.

ꢁ —/—: Press “SEARCH/—/—“ button can select the channels in the service list. If press this button

and will appear “—-“, then press the number button to input “365” and enter to the 365^thprogram, if

appear “—“ on the screen and use number button input “65”, then enter to the 65^thprogram.

ꢁ PG-./+: Press this button can PG-/PG+ in the service list to select the preferred program.

Menu operation Note: Asꢃicon appear on the menu item, you can pressꢃbutton on the remote to

pop option box and pressꢀꢁbutton to highlight the option item, then press OK button to confirm.

Press ꢂbutton to exit option box without changing option item.

1. Main Menu

Press Setup key to show the Main Menu on the screen. There are 4 menu items:

ꢁ Service

ꢁ Scan

ꢁ Setup

ꢁ EPG

Press Left/Right button to select a menu item, press OK button to confirm it and enter into this Sub-

menu. Press EXIT/VIDEO OUT button to return to the Main Menu.

Note: Press EXIT/VIDEO OUT button can return to the previous menu from the current menu, press this

button repeatedly, you can exit from the Main Menu.

2. Service

Service window shows the service list. Press

TV/R/menu button to shift service list between

TV and radio. Press Pg+ / Pg- button to page the

channel pages up/down. There are maximum 600

channels can be stored.

Pressꢀ/ꢁbutton to choose the service, then

press OK button to play the service and the ser-

vice information is displayed in the service infor-

mation box.

-18-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

2.1 Service add to favor

Four color button on bottom of service window are defined as favor list button: News (red) Movie

(green) Sports (yellow) Music (blue).

Pressꢀꢁbutton to choose the service, press color button to add the service to favor list accordingly

and the color favor icon is showed on the right. Press the color button to remove the service from the

favor list and the color favor icon disappear.

When no menu displayed on the screen, press color button to show the service favor list accordingly.

Press the red button to move the chose favor service: pressꢀꢁbutton to choose the service, press

red color button to focus and useꢀꢁbutton to move the service up/down, press OK button to confirm.

2.2 Service Edit

When no menu displayed on the screen, press

OK button to show the service list. Three color

button on the bottom of window is defined as

service edit button: move (white) lock(green) de-

lete (yellow).

Press white color button to move the service: press ꢀꢁ button to choose the service, press red color

button to focus and use ꢀꢁ button to move the service up/down, press OK button to confirm.

Press green color button to lock the service: press ꢀꢁ button to choose the service, press green

color button and input the correct PIN CODE using the digit button, press OK button to confirm. The icon

is appeared on the corresponding channel, if you want to cancel the Lock, press green button again

and input the correct PIN CODE, the service is unlocked and icon will disappear. The default pass-

word is “0000”.

Press yellow color button to delete the service: press ꢀꢁ button to choose the service, press yellow

color button to pop the message box of delete?, press OK button to confirm it, or press EXIT/VIDEO OUT

button to cancel it and exit.

3. SCAN

You can scan the channel in the SCAN submenu.

SCAN type: Manual Scan, Auto Scan, NIT Scan

Channel: use the digital button on the remote con-

trol to input the channel number.

Update mode: Append, Replace If you select

Append, the new channel will be appended to the

last of the channel list. Note: The new channel is

that not in the channel list before.

If you select Replace, all of channels will be re-

placed by new channels.

3.1 Manual Scan

Select Manual Scan, input the proper channel

number, and choose a proper Update mode, press

OK button, the screen shows Message Box of

please wait… and begin to scan. You can press

EXIT button to exit.

The screen shows N service found when the

scan has been finished (N means the number of

the scanned channels). Press EXIT/VIDEO OUT

button to exit.

-19-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

3.2 Auto Scan

Select Auto Scan, choose an Update mode, press

OK button, the screen shows Message Box of

Scan Process and begin to scan. You can press

EXIT/VIDEO OUT button to exit.

Note: When select Auto scan, service number

can not setup, and the system will automatically

scan.

The Message Box of Scan Process shows the

percentage of the scan process, TV channels

and radio channels have been displayed in two

columns.

The screen shows N service found when the

scan has been finished, press EXIT/VIDEO OUT

button to exit.

3.3 NIT Scan

Select NIT Scan, input the proper channel number, and choose a proper Update mode, press Ok button,

show the Message Box of Please wait… and begin to scan. You can press EXIT/VIDEO OUT button

to exit.

The Message Box of Scan Process shows the percentage of the scan process, TV channels and

radio channels have been displayed in two columns.

The screen shows N service found when the scan has been finished, press EXIT/VIDEO OUT button

to exit.

Note: Please don’t power off immediately after SCAN.

4. Setup

There are 8 submenus:

ꢁ AV Setup

ꢁ Language Setup

ꢁ Time Setup

ꢁ Password Setup

ꢁ LCN Setup

ꢁ Factory Restore

ꢁ Booking List

ꢁ Version

4.1 AV Setup

There are following submenus under the AV setup:

TV Shape:

4:3 Letter Box/ 4:3 Pan& Scan/4:3 FullFrame /16:9

Audio Track: Stereo/ Left/ Right

4.2 Language Setup

Language setup menu:

Menu:

English/Français/Español

Subtitle: English

Audio:

English

TeleText: English

4.3 Time Setup

Time Zone: GMT - 11 ~ GMT + 1

Sleep Time: No Sleep/ 5 Mins/ 10 Mins/ 20 Mins/

30 Mins/ 60 Mins

Choose a Sleep Time, press OK button, the unit

start to count, when count to the Sleep Time, the

unit will enter sleep status.

-20-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATION

Note: When turn 0off the unit and press STANDBY button enter to standby status, set up to sleep time

is invalid.

4.4 Password Setup

Use the digital buttons to input the old password,

then input a new password, retype the new

password, press OK button, then the new pass-

word has been enable.

4.5 LCN Setup

Choose this item to setup the On / Off status of

LCN.

If choose On, the system shall automatically list

the channels in a natural order according to the

signal flow; and If choose Off, the system shall automatically list the channels in their usual order.

Push OK button to confirm and Exit button to cancel the operation.

4.6 Factory Restore

Choose Factory Restore, press OK button, the screen shows Message Box of factory restore, press

OK button to confirm it, press EXIT/VIDEO OUT button to exit.

You must restore the factory setup if this unit is used for the first time or the software has been

upgraded.

4.7 Booking List

Choose Booking List and press OK button to en-

ter the Booking List, the screen shows Program

information:

Channel number, Channel list, Play time, Event

time.

Press

number button can remove the selected booking program.

4.8 Version

Choose version, press OK button and show the software version, press OK to exit.

5. Electronic Program Guide (EPG) At present not available in Australia

Select EPG under the Main Menu to enter into EPG menu,

Use

button to select event, use

button to browse, use

button to book a program. Press OK

button to show the detail information. Press EXIT/VIDEO OUT button to exit.

The booked program list will be displayed on the Booking list in the Setup menu.

-21-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

SETUP

Main Menu

Sub-Menu

Option

TV/Radio

Lock

Description

TV/Radio

Lock the service

Move the service

Favor : News

Favor : Movie

Favor : Sports

Favor : Music

Manual Scan

Auto Scan

Move

TV Service/Radio

Service

News (red)

Movie (green)

Sports (yellow)

Music (blue)

Manual Scan

Auto Scan

Scan Type

Nit(Net Information table)

Scan

Nit Scan

Scan

Channel

Append

Replace

Append

Replace

Update Mode

4:3 Letter Box

16:9 Pan & Scan

4:3 FullFrame

16:9

4:3 Letter Box

16:9 Pan & Scan

4:3 FullFrame

16:9 Full Frame

Stereo

TV Shape

AV Setup

Stereo

Audio Track

Left

Right

English

Left track

Right track

English

Language Setup

Français

Español

French

Spanish

Time Zone

GMT-11~GMT+11

No Sleep

5 Minutes

10 Minutes

20 Minutes

30 Minutes

60 Minutes

Off

Time Zone

No Sleep

5 Minutes

Setup

10 Minutes

20 Minutes

30 Minutes

60 Minutes

Set Summer Time as Off

Set Summer Time as On

Password Setup

Set LCN as LCN Off

Set LCN as LCN on

Factory Restore

Booking List

Version

Sleep Time

Time Setup

Summer Time

Password Setup

LCN Setup

LCN Off

LCN On

Factory Restore

Booking List

Version

Events

Browse

Booking

Detail

Browse

Booking

Detail

EPG

Exit

-22-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

FORREFERENCEONLY

ꢁ

Maintenance

CHAPTERNUMBER

Be sure to turn the unit off and disconnect the AC

power cord before maintaining the unit.

Keep the unit clean. If the surfaces are extremely

dirty, wipe the unit with a dry soft cloth. Never

use alcohol, benzene or other chemicals. Do not

use compressed air to remove dust. Ask the tech-

nician to maintain the unit when problems appear.

These numbers are recorded on DVD discs. A

title is subdivided into many sections. Each of them

is numbered, and specific parts of video presen-

tations can be searched quickly using these

numbers.

DVD disc

This refers to a high-density optical disc on which

high-quality pictures and sound have been re-

corded by means of digital signals. Incorporating

a new video compression technology (MPEG2)

and high-density recording technology, DVD en-

ables esthetically pleasing full-motion video to be

recorded over long periods of time (for instance,

a whole movie can be recorded).

ꢁ DEFINITION OF TERMS

DVB MPEG-2

DVB is the abbreviation of Digital Video

Broadcasting, which is a standardization group.

DVB-T corresponds to the type of transmission

(T=Terrestrial). MPEG is the abbreviation of Mov-

ing Picture Experts Group, a working group which

defines international standards for audio and video

digital compression. The MPEG 2 standard ap-

plies to the compression of digital TV signals.

Subtitles

These are the printed lines appearing at the bot-

tom of the screen, which translate or transcribe

the dialogue. They are recorded on DVD discs

and up to 32 languages.

Subtitles

There are the printed lines appearing at the bot-

tom of the screen which translate or transcribe

the dialogue. They are recorded on DVD discs

and up to 32 languages.

Audio

Language recorded on discs and the maximum

languages are up to 8.

FEC

FEC stands for Forward Error Correction, used to

correct signal transmission faults between an-

tennas and your receiver.

Time

This indicates the play time elapsed from the start

of a disc or a title. It can be used to find a specific

scene quickly (it may not work with some discs).

Title Number These numbers are recorded on DVD

discs. When a disc contains two or more movies,

these movies are numbered as title 1,title 2, etc.

PID

The PID code (Packed Identification) is the identi-

fication number of audio and video signals in the

digital data flow of DVB MPEG-2 signals. With this

code, the receiver transmits audio and video sig-

nals to a specific address. The PCR PID code is

the identification code of the synchronization

symbol. It is usually the same as the Video PID.

Track Number

These numbers are assigned to the tracks, which

are recorded on audio CDs. They enable specific

tracks to be located quickly.

ANGLE

RAW

Recorded onto some DVD discs are scenes,

which have been simultaneously shot from a num-

ber of different angles (i.e. the same scene is

shot from the front, left side and right side, etc.).

With such discs, the ANGLE button can be used

to view the scene from different angles.

The original DTS, AC-3 5.1 signals non-decoded.

If users choose “RAW” as audio setting, they must

connect a decoder to decode those original audio

signals.

-23-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

FORYOURREFERENCE

Audio output (Impedance: 10k ohm):

ꢁ Output level : 1.8+0.2/-0.8Vrms (1KHz 0dB)

ꢁ Harmonic distortion : -65dB (JIS-A 1KHz,

typical)

ꢁ Dynamic range : 80dB (JIS-A 1KHz, typical)

ꢁ S/N ratio : 90dB (JIS-A 1KHz, typical)

Specification

Power requirement : ~240V,50Hz

Power consumption :

28W

Operating temperature range : 0~+40°C

Operating humidity range : 5~90% (no

condensation)

Digital audio output:

ꢁ Coaxial output

ꢁ Optical output

DVD PART:

Disc played:

1. DVD-video disc

ꢁ 12cm single-sided, single-layer

ꢁ 12cm single-sided, double-layer

ꢁ 12cm double-sided, double-layer (single sided)

ꢁ 8cm single-sided, single-layer

ꢁ 8cm single-sided, double-layer

ꢁ 8cm double-sided, double-layer (single sided)

DVB-T PART:

ꢁ High Frequency

Input Frequency Range :

174 ~ 230MHz; 470 ~ 862MHz VHF&UHF

IF Bandwidth : 7 or 8MHz

Input Signal Level : -72 ~ - 20dBm

RF Input Connector : IEC169 - 2 type, Female

RF Output Connector : IEC Type, male

Input impedance : 75S

2. CD-AUDIO, DVD-VIDEO, CD, HDCD, DTS-CD,

MP3, DIVX, JPEG disc

ꢁ 12cm disc

ꢁ 8cm disc

ꢁ De-module Mode

Video output:

Waveform :

ꢁ Output level : 1 0.2Vp-p (75S)

COFDM (Code Orthogonal Frequency Division

Multiplexing)

ꢁ Horizontal resolution :

500 lines

Demodulation : QPSK, QAM16, QAM64

Mode : 2K, 8K

Video, Audio code

ꢁ Video decode : ISO/IEC13818-2 MPEG2

MP@ML Compatible

Guard interval : 1/4,1/8,1/16,1/32

Code rate : 1/2,2/3,3/4,5/6,7/8

Teletext : support DVB-TXTETSI/EN300472

Audio decode : ISO/IEC13818 - 3

Audio Track : Stereo, Left ch, Right ch.

Audio Sample rate : 32, 44.1, 48KHz

ꢁ Video resolution : 720 576

ꢁ Video code rate : 15Mbit/s Max.

ꢁ S/N ratio : 56dB

Weight and dimensions are approximate

Specifications are subject to change with or without notice.

-24-

PDVDX100S-100B-im.p65

06-5-16, 11:31

Download from Www.Somanuals.com. All Manuals Search And Download.

FORYOURREFERENCE

Troubleshooting

Check the chart below for a possible cause of the problem you are experiencing before requesting

service for this unit. Some simple checks or a minor adjustment on your part may eliminate the problem

and restore proper operation. Let the technician maintain the unit.

Keep away from static electricity properly before maintenance as loader, key IC are easy to be

damaged by it.

Trouble

Possible Cause