INTRODUCTION
OWNER’S MANUAL
Note: Your warranty period begins at
the time of purchase. The warranty
is validated only by the dated store
receipt! Please record the serial num-
ber of the unit in the space provided in
the warranty section of the manual.
Dear Whistler Owner,
XTR-690
Total Band Protection™
LASER-RADAR
If you have questions concerning the oper-
ation of this Whistler product please
call:
DETECTOR
CuSTOmer
SeRVICE
To fully acquaint yourself with the
operation of your Whistler detector
and to better understand the differ-
ences between detecting radar, laser,
and safety radar signals, we recom-
mend reading this entire manual or
visiting our F.A.Q. page on our web-
site www.whistlergroup.com
1-800-531-0004
Monday - Friday • 8:00 am - 5:00 pm CT
or visit our website
www.whistlergroup.com
Please keep the receipt in a safe place.
You may register your product online
at www.whistlergroup.com. For warranty
verification purposes, a copy of your dated
store receipt must still accompany any unit
sent in for warranty work. If the unit is
returned without a dated store receipt, an
out of warranty service charge applies.
The Whistler Group Corporate Headquarters
13016 N. Walton Blvd. • Bentonville, AR 72712
Tel 479.273.6012 • Fax 479.273.2927
Enjoy your Whistler detector and
please drive safely.
Customer Return Center
551 N. 13th St. • Rogers,AR 72756
Customer Service Tel 800.531.0004
Sincerely,
www.whistlergroup.com
The Whistler Group, Inc.
P/N 260013, Rev 1
©
2007 The Whistler Group, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
INSTALLATION CONT.
OPERATION
Mounting Guidelines
Windshield Mounting
Power On, Self Test
• Mount the unit as low as possible near the
center of the windshield.
• Install the two suction cups and rubber bumper
onto the bracket by fitting them into their holes.
• Press the suction cups onto the windshield at the
location you have chosen.
To turn the Power ON or OFF, push the center
of the Power/Volume button.
Each time your Whistler detector is turned on,
an automatic self-test sequence confirms that
the speaker and visual displays are functional.
• Display shows in order:
1. WHISTLER 2. X-band 3. K-band 4. Ka-band
5. LASER 6. SR OFF 7. VOICE ON 8. POP ON
9. B SVR ON 10. FILTER 11. HIGHWAY
• Do not mount the unit behind wipers,
ornaments, mirrored sunscreens, etc. These
obstructions have metal surfaces which can
affect radar and laser signals and reduce
critical warning time. (Regular tinted glass
does not affect reception).
Important: Some newer cars have a plastic safety
coating on the inside of the windshield. The wind-
shield bracket may leave permanent marks on this
type of surface. To find out if your vehicle has this
type of windshield, check the owner’s manual or ask
your dealer. We recommend that you do not leave
the suction cup bracket on the window in direct sun-
light. If the detector is removed, this may cause
blistering of the dash in some vehicles.
• Slide the detector onto the bracket until it locks into
place.
• Some windshields have an Instaclear™ or
Electriclear™ type coating, which affect radar
signals. Consult your dealer or the owner’s
manual supplied with your vehicle to determine
if your windshield has this coating.
• Avoid placing the unit in direct contact with the
windshield.
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and Quiet buttons simultaneously
• Display Shows:
• Press Dark button to exit.
• To reduce the possibility of theft, conceal your
unit when not in use.
• If necessary, the unit may be leveled by bending the
windshield bracket. Press the bracket release button
and remove the detector before bending.
Setting Saver
Setting Saver saves your personalized settings
so that when the detector is turned off and then
on again, you do not have to re-enter them.
Power Cord Connection
• Plug the small end of the power cord into the
unit’s power jack.
Windshield
Mounting
Feature Engaged Confirmation
Each time a button is pressed, one beep confirms
feature “on”, two beeps confirm feature “off”.
• Plug the large end into the vehicle’s cigarette lighter.
Note: Cord fits tightly into detector. When
IMPORTANT: Make sure the unit is level
installing the cord, expect some resistance.
®
Integrated Real Voice
Fuse Replacement
When selected, Real Voice® will be used to articu-
late the following:
The lighter socket plug is equipped with a
replaceable 2 amp 3AG fuse located behind the
silver tip. To replace the fuse, carefully unscrew
the tip of the plug.
1. Band Identification
2. Safety Warning System messages
3. Feature Selection
Rubber Bumper
Important: Unscrew slowly. The tip contains a
spring which may fly out when disassembling.
Insert the new fuse with the spring and screw on
the tip. With use, screw cap on plug may loosen.
Retighten occasionally.
Note: In certain cases the voice message does not
replicate the text message.
5
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
OPERATION
Audio Level Adjustment
The audio levels can be adjusted high to low or
low to high.
City/City 1/City 2 Mode
Dual LED Alert Periscope
Whistler’s Three Stage City Mode is designed to
reduce the annoyance of automatic door open-
ers, intrusion alarms and other devices which share fre-
quencies with police radar. Generally, X band is
used for these devices.
Whistler’s new Dual LED Alert Periscope provides
an added attention getting visual alert. The two
extra LED’s flash on and off when the unit alarms
to provide a unique visual alert. This alert can be
programmed, through the Option Select Mode to:
1. flash for all alarms, 2. remain on, or 3. turn LEDs
off completely.
• Move Power/Volume button back to increase
audio level.
• Move Power/Volume button forward to
decrease audio level. As audio level is
adjusted, beeps are provided and the display
indicates volume level.
• Press City button to cancel Highway Mode
and engage City Mode.
• Press City button again to enter City 1 Mode.
• Press City button again to enter City 2 Mode.
• Pressing City button a fourth time cancels City 2
Mode and returns the unit to Highway Mode.
Compass Mode
Auto Quiet Mode
The unit is programmed from the factory in
“Combo Mode”. COMBO mode means that
the unit provides both compass readings as well
as detecting laser/radar signals. Through the
“Option Select Mode”, either laser / radar or com-
pass features can be turned off meaning, RADAR
equals detection of all police bands and laser;
COMPASS equals no detection of police
laser/radar.
Auto Quiet reduces the selected audio level to
level (1) approximately 5 seconds after a radar or
safety radar signal is detected. The alert for any
new signal within 20 seconds will resume at level
(1). Auto Quiet does not affect laser alerts.
• Press Quiet (before a signal is detected) to
engage Auto Quiet.
In City Mode, weak speed/safety radar signals
give an initial alarm of two beeps, and then
remains quiet unless the signal becomes very
strong. When the signal strength increases, two
additional beeps are provided. City 1 and City 2
Modes operate the same as Highway Mode, but
in City 1 Mode, only the X band sensitivity is low-
ered. In City 2 Mode, X-band is not detected.
• Once the Auto Quiet mode is engaged, you
may cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to
cancel Auto Quiet mode.
Note: The unit must be calibrated to provide
accurate compass readings. See Compass
Calibration Set-up section on page 14.
Caution: Some towns/small cities may still be
using X band radar. City Modes do not change
the audio alert for laser.
Quiet Mode
Dim/Dark Mode
Quiet cancels audio during an alert and any new
alert within 20 seconds. After 20 seconds of no
radar signal detected, 2 beeps are provided on any
new alert and then the audio remains quiet.
• Press Quiet to cancel the audio.
Dim/Dark Mode reduces the illumination of the
display.
Highway Mode
•
Press the Dark button to reduce illumination
to a Dim setting.
Highway mode provides full audio warnings any
time radar (X, K, Ka, Safety Radar) or laser sig-
nals are detected, and is recommended for open
road driving.
•
Pressing the Dark button a second time
engages Dark Mode. The display illumination
is further reduced.
• Press Quiet a second time during an alert to
restore the standard audio alert pattern; or turn the
unit off, then on.
Note: In Combo Mode an “H” or “C” will be
shown to indicate mode of operation.
Dim or Dark Mode can be engaged during an
alert. In Dark Mode, the display goes dark for as
long as a signal is being detected and for 20
seconds after, then the display returns to the
dimmer setting.
For more information on City and Highway modes,
please visit our F.A.Q. page on our website:
www.whistlergroup.com
•
Pressing the Dark button a third time restores
full illumination to the display.
8
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
OPERATION
Vehicle Battery Saver Mode
Option Select Mode
Stay Alert Feature
The Vehicle Battery Saver Mode automatically shuts
off your detector after 3 hours. The timer is reset if
the detector is turned off, unplugged or any button
is pressed before the timer has expired. The detec-
tor will alert you with an audible and visual warning
before it shuts off. During this warning, you can
momentarily reset the timer by pressing any button.
If the unit has automatically turned itself off, press
any button to turn the unit back on.
Entering Option Select Mode allows you to customize
options such as Tone Select and Abbreviated Power Up
Sequence. Press the Menu button to enter Option Select
Mode. When selecting options, the Dark or Quiet buttons
must be pressed within 20 seconds or Option Select Mode
will automatically exit. To enter:
The Stay Alert Feature is designed to test a driver’s
alertness. To engage (when the unit is not alarming) :
• Press and hold the City button for approximate-
ly 2 seconds. Release the button during or imme-
diately after the alert is given. Display shows:
Within 30-60 seconds, two beeps are sounded;
to show alertness, the driver must press either the
City, Menu, or Quiet buttons within 3-5 seconds. If a
button is pressed within 3-5 seconds, the cycle is
repeated.
Refer to “Option Select Mode” for instructions
for deactivating battery saver mode feature.
If a button is not pressed within 3-5 seconds, an
alarm sounds and the display shows:
Filter Mode
There are times when a radar detector can emit
the same frequency as police radar and can
cause your detector to falsely alarm. Sometimes
a detector can display a signal when picking up
another radar detector in vehicle close by. The
Whistler Filter Mode options provide a method
to study the signal which will verify if the signal
is a legitimate police radar or a false alert from
another detector. Three options exist:
Filter: Allows for normal filtering.
• Press the Dark button to exit the Stay Alert feature.
WARNING!!! Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT oper-
ate a vehicle if you are drowsy. During extended
periods of vehicle operation, you should take fre-
quent breaks. Improper reliance on the Stay Alert
feature may result in vehicle damage, personal
injury or death. NEVER OPERATE A VEHICLE IF
YOU ARE DROWSY.
Filter 1: Provides and extra step to analyze the
legitimacy of the signal.
Filter 2: Provides 2 extra steps to analyze legiti-
macy of the signal.
SWS
Safety Warning System™
In communities where transmitters are located,
the Safety Warning System™ displays over 60
text messages. When Safety Radar is detected
the audio alert is geiger counter-like.
Filter is the factory default and should provide
adequate filtering for most conditions. If you
experience excessive alerts due to radar detec-
tors in other vehicles, try the Filter 1 option. If
you continue to receive alerts from radar detec-
tors, use the Filter 2 option. Filter Mode does
not override Highway or City settings. See
Option Select Mode to change Filter settings.
Safety Warning System Text
Example: Poor - Road - Surface.
Note: Not all areas have Safety Warning System™
transmitters.
Press the Power button to exit Option Select Mode.
11
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
POP MODE ALERTS
Because POP™ Mode radar utilizes the same
K or Ka band frequencies, POP™ Mode Alerts will be
displayed as regular radar alerts.
™
Alert Priority
Reset Features
POP Mode Alerts
When two or more signals are received at the
same time, the alert priority is:
1. Laser 2. Speed Radar 3. Safety Radar
Example: If X band is alerting, then suddenly a
laser signal is detected, the laser warning will
override the X band alert.
All user features can be reset to factory settings.
•Unplug the Power Cord from the unit.
•Press and hold the Power and Quiet buttons.
•Plug the Power Cord into the unit.
•Wait for 2 beeps.
•Release the Power and Quiet buttons.
Unit is now reset to the following features
and settings.
LASER/RADAR ALERTS
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected, the band ID and
signal strength are displayed. The audio alert is
continuous and has a geiger counter-like
pattern. The faster the beep, the closer or
stronger the radar source.
Compass Calibration Set-up
The unit will need to be calibrated in order for
the compass to provide accurate readings. To
calibrate the unit, perform the following proce-
dure:
1. Mount the unit level in the center of the
vehicle’s windshield. Make sure there are no
other magnetic sources near the detector
(i.e., speaker).
2. Select a large clear area (parking lot or field)
without any power lines.
3. Press the Menu button until display shows
CAL MODE. Then press the Dark and Quiet buttons
simultaneously. The display shows (scrolling):
Default factory settings are:
1. S1: (For Intellicord®) Power ON or OFF.
2. S2: (For Intellicord®) Quiet feature.
3. Combo Mode.
Laser Audio/Visual Alerts
When a laser signal is detected the audio alert is
continuous for a minimum of 3 seconds.
4. HIGHWAY Mode.
• The Displays Shows:
5. Dim/Dark Mode to full illumination of display.
6. Auto Quiet Mode OFF.
7. Safety Radar OFF.
®
Pulse Protection
8. Vehicle Battery Saver ON.
9. Full Power Up sequence.
10. Default TONE 3.
Pulse (or instant-on) radar is more difficult to
detect than conventional radar because it
remains ‘off’ until activated to measure the speed
of a targeted vehicle.
11. All Bands ON.
12. Laser ON.
When a pulse type transmission is detected, your
Whistler detector sounds an urgent 3-second
audio warning and the display shows:
4. If calibration does not automatically finish press
the Dark and Quiet buttons simultaneously to com-
plete calibration. The unit will beep twice and dis-
play shows, for example:
13. POP ON.
14. Voice ON.
15. LED Periscope to BLNK.
Intellicord® Ready
Using Whistler’s optional Intellicord® Power Cable
allows some models to control the detector’s fea-
tures such as Power On/Off, City Modes,
Dim/Dark, and Quiet/Auto Quiet with a simple
press of the button on the Power Cable. Two fea-
tures can be controlled: one by a short press of
the button, and the second by a long press of the
button. Option Mode allows the user to program
the feature assignments.
After the 3-second pulse alert, the standard alert
pattern continues for as long as the signal is
present.
It is important to respond promptly to a pulse
alert, since warning time may be minimal.
Note: In Combo Mode an “H” or “C” will be
shown to indicate mode of operation.
Important: If unit mounting is relocated in the
vehicle, (i.e., visor to windshield mounting or
dash mounting), or if the unit is moved to
another vehicle, you must recalibrate the com-
pass.
14
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
CARE AND MAINTENANCE
FCC INFORMATION
Your Whistler detector is expertly engineered
and designed to exacting quality standards to
provide you with reliable, trouble-free operation.
If your unit has been correctly installed following
the guidelines in this manual, but is not
operating optimally, please refer to the
troubleshooting guide below.
FCC ID: HSXWH20
Care And Maintenance
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device many not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
During the summer months, avoid prolonged
exposure to direct sunlight by removing your unit
from the dash when your vehicle is parked for an
extended period of time. Do not spray water,
cleaners, or polishes directly onto the unit. The
spray may penetrate through the openings and
damage the unit. Also, do not use any abrasive
cleaners on the unit’s exterior.
PROBLEM: No display or audio.
• Check fuse in plug; replace if necessary with a
2 amp, 3AG type.
• Check fuse for lighter socket; replace if
necessary.
• Make sure lighter socket is clean.
Important: FCC requirements state that
changes or modifications not expressly approved
by Whistler could void the user’s authority to
operate the equipment.
ARE DETECTORS LEGAL?
In Most States YES!
Laser-Radar detectors are legal in every state
(with the exception of Virginia and Washington,
D.C., which have local regulations restricting the
use of radar receivers in any vehicle) when used
in automobiles or light trucks (under 10,000 lbs.).
PROBLEM: Unit alarms when vehicle hits
bumps.
• Check for loose lighter socket; tighten and
clean.
• Check connections at both ends of power
cord. Substitute another cord to determine if
cord is defective. Return defective cord to
the factory.
SPEED MONITORING
Radar Facts
A radar gun operates by transmitting radio
waves at certain frequencies which reflect off
objects and are picked up by the radar gun’s
receiving section. When a radar beam reflects
off a moving target, a measurable frequency shift
occurs. The radar unit converts this shift into miles
per hour to determine your vehicle’s speed.
Currently, the FCC (Federal Communications
Commission) permits operation of traffic radar
guns at X Band (10.500 - 10.550 GHz), K Band
(24.050 - 24.250 GHz), and Ka Band (33.400 -
36.000 GHz).
Concerning trucks over 10,000 lbs., the Federal
Highway Administration (FHWA) issued a
regulation, effective January, 1994 which prohibits
radar and laser detector use in these types of
vehicles nationally. Prior to the FHWA regulation,
laws existed in the state of New York restricting
the use of radar detectors in trucks over 18,000
lbs. and in Illinois in trucks over 26,000 lbs.
PROBLEM: Audio alerts are not loud
enough.
• Cancel Auto Quiet Mode or City Mode.
• Check audio level setting (see page 8 ).
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide, please
call Whistler Customer Service at 1-800-531-0004
or visit our F.A.Q. page at
www.whistlergroup.com/faq-detectors.asp,
before returning your unit for service.
Note: A radar detector will only alarm if an
officer is transmitting on any one of the above
radar bands.
17
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEED MONITORING
SPEED MONITORING
SPEED MONITORING
POP™ Mode
Note: The newest tool Police have to detect
radar detectors is called Spectre. Spectre
can detect the majority of undetectable (VG-2)
laser/radar detectors on the market.
Laser Tips
POP™ Mode is a feature on some newer radar
guns operating on K and Ka bands. When the gun
is in POP™ Mode and activated, a brief burst of
energy, less that 1/15 of a second, is transmitted
and the vehicle’s speed is quickly acquired. A
detector without POP™ Mode detection capability
cannot respond to this brief transmission.
If you are the targeted vehicle, a laser gun can
often determine your speed within a few
seconds after you receive an alert. In this situa-
tion, there is generally no time to safely adjust
your speed. However, if you are traveling near or
behind the targeted vehicle and receive an alert,
response time should be sufficient. Any laser
alert, regardless of duration, requires immediate
action!
It is the responsibility of the individual radar detector
user to know and understand the laws in your area
regarding the legality of the use of radar detectors.
Laser Facts
WARRANTY INFORMATION
It’s well documented that many radar guns
cannot reliably provide the speed of a targeted
vehicle that is traveling in a group of vehicles. In
contrast, a laser gun can target a specific vehicle
out of a line of traffic and determine its speed. The
advantage of laser over radar in terms of
target identification is the result of the laser gun’s
narrow beam. A radar gun’s transmission can
cover more than a four-lane highway at a distance
of 1,000 feet, compared with a laser gun’s trans-
mission which covers about 3 feet at the same dis-
tance. For best protection, keep these points in
mind:
Consumer Warranty
Other Speed Detection Systems
This Whistler Laser-Radar detector is warranted
to the original purchaser for a period of three years
from the date of original purchase against all
defects in materials and workmanship. This
limited warranty is void if the unit is abused,
modified, installed improperly, or if the housing
and/or serial numbers have been removed. There are
no express warranties covering this product other
than those set forth in this warranty. All express or
implied warranties for this product are limited to the
above time. Whistler is not liable for damages
arising from the use, misuse, or operation of this
product.
Several techniques other than radar or laser are
used to measure vehicle speeds. When these
methods are being used, no detector can provide
a warning. These techniques include:
• Pacing - A patrol car drives behind you and
matches your driving speed.
• Vascar/Aircraft - The time it takes a vehicle to
travel a known distance is measured.
Radar Detector Detectors: VG-2,
Spectre
• Because the vehicle’s license plate or
headlights are the laser gun’s primary targets,
mounting the Whistler detector on the
dashboard can improve laser detection at short
range.
• Do not follow closely behind any vehicle you
cannot see through. If you can’t see past a
vehicle ahead of you, chances are your detector
can’t either.
• The receiving range of your laser detector will
not be the same as a radar detector. Laser guns
are most often used at short range.
The Interceptor VG-2 or simply VG-2, is one type of
microwave receiver used by Police to detect signals
radiated by the local oscillator of a radar detector.
Because its purpose is to identify persons driving
with radar detectors, these devices are known as a
“radar detector detector” (RDD).
An RDD is the primary tool used by the police to
identify radar detector equipped vehicles. If caught
in a state or country where detectors are illegal (see
page 18), drivers risk losing their radar detector and
receiving a fine. In addition, instant-on radar is
almost always used in combination with an RDD,
leaving unsuspecting motorists vulnerable to receive
two tickets - one potential for speeding, and the
other for possession of a detector.
Whistler Laser-Radar detectors receive all current
laser guns which operate at a laser wavelength of 905
+/- 10nm.
Pro Laser™ I II III
•LT1 20-20
•Ultra Lyte
20
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
WARRANTY INFORMATION
WARRANTY INFORMATION
ACCESSORIES
3. Be certain your unit is returned with its serial
number. For reference, please write your unit’s
serial number in the following space:
s/n______________.
Important: When returning your unit for service,
be certain to include a daytime telephone
number and an email address (if applicable).
Service Under Warranty
These and other accessories can be
ordered directly from Whistler by calling
1-800-531-0004 or visiting our online store
at www.whistlergroup.com
During the warranty period, defective units will
be repaired without charge to the purchaser when
returned with a dated store receipt to the address
below. Units returned without a dated store
receipt will be handled as described in section
“Service Out Of Warranty.”
Due to the specialized equipment necessary for
testing a Laser-Radar receiver, there are no
authorized service stations for Whistler brand
detectors other than Whistler.
Customer Service
Units without serial numbers are not covered under warranty.
If you have questions concerning the operation of your
Whistler detector, or require service during or after the
warranty period, please call Customer Service at:
Important: To validate that your unit is within
the warranty period, make sure you keep a
copy of your dated store receipt. You may
register your warranty online at
Order # Description
Price
$ 9.95
$27.95
$9.95
1-800-531-0004
Representatives are available to answer your questions
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or
visit the F.A.Q.’s at www.whistlergroup.com.
500501
403774
202151
206552
206553
206880
Zipped Travel Case
Intellicord®
warranty verification purposes, a copy of
your dated store receipt must accompany any
unit sent in for warranty work.
Windshield Bracket Kit
Straight Power Cord (5’)
Coiled Power Cord (7’)
When returning a unit for service, please follow
these instructions:
$14.95
$15.95
$9.95
Service Out of Warranty
Units will be repaired at “out of warranty” serv-
ice rates when:
• The unit’s original warranty has expired.
• A dated store receipt is not supplied.
• The unit has been returned without its serial
number.
• The unit has been abused, modified,
installed improperly, or had its housing
removed.
SPECIFICATIONS
Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
1. Ship the unit in the original carton or in a
suitable sturdy equivalent, fully insured, with
return receipt requested to:
Hardwire Kit (10' )
(for wiring to fuse box)
206666
Modular* Cord Package
(includes coiled and straight
cords, and power adapter)
$17.95
Whistler Repair Dept.
1201 North Dixieland Rd.
Rogers, AR. 72756
Operating Temperature Range:-20˚ C to +80˚ C
(-4˚ F to +176˚ F)
159032
402081
206660
Package of 8 Suction Cups
Non Skid Dash Pad
$2.95
$6.95
Please allow 3 weeks turnaround time.
Important: Whistler will not assume responsi-
bility for loss or damage incurred in shipping.
Therefore, please ship your unit insured with
return receipt requested. CODs will not be
accepted!
Power Requirements:
The minimum out of warranty service fee for
your Whistler detector is $55.00 (U.S.). If you
require out of warranty service, please return
your unit as outlined in the section “Service
Under Warranty” along with a certified check or
money order for $55.00. Payment may also be
made by MasterCard, VISA, or American
Express; personal checks are not accepted.
Straight Modular Cord &
Socket Multiplier
Operational 12 to 15 volts DC, 250mA nominal
Vehicle Battery Saver, 30mA nominal.
$11.95
$12.95
206661
Coiled Modular Cord &
Socket Multiplier
One or more U.S. patents may apply:
#5,146,227, #5,379,456, #5,666,120, #5,990,821,
#7,215,276
POP™ Mode is a trademark of MPH Industries, Inc.
SWS™ is a trademark of Safety Warning System L.C.
2. Include with your unit the following
information, clearly printed:
* Modular: Interconnecting pieces cord and plug.
Shipping and handling (per order) $5.00 . Prices
are subject to change without notice.
• Your name and street address (for
shipping via UPS), a daytime telephone
number and an email address, if applicable.
• A detailed description of the problem (e.g.,
“Unit performs self-test but does not respond
In the event repairs cannot be covered by the min-
imum $55.00 service fee, you will be contacted by
a Whistler technical service specialist who will out-
line options available to you. If you elect not to
have your unit repaired, it will be returned to
you along with your certified check or money
order.
`
to radar”).
• A copy of your dated store receipt or bill of
sale.
Specifications are subject to change without notice.
23
24
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|