Whirlpool Double Oven GGE388LX User Manual

®
ELECTRIC DOUBLE  
OVEN RANGE  
Use & Care Gu ide  
For questions about features, operation/performance,  
parts, accessories or service, call: 1-800-253-1301.  
or visit our website at...  
Table of Contents ...........................................2  
Models  
GGE388LX, GGE390LX  
W10291450A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RANGE SAFETY  
Your safety and the safety of others are very important.  
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety  
messages.  
This is the safety alert symbol.  
This symbol alerts you to potential hazards that can kill or hurt you and others.  
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”  
These words mean:  
You can be killed or seriously injured if you don't immediately  
DANGER  
follow instructions.  
You can be killed or seriously injured if you don't  
instructions.  
follow  
WARNING  
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can  
happen if the instructions are not followed.  
The Anti-Tip Bracket  
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without  
having the anti-tip bracket fastened down properly.  
WARNING  
Tip Over Hazard  
A child or adult can tip the range and be killed.  
Connect anti-tip bracket to rear range foot.  
Reconnect the anti-tip bracket, if the range is moved.  
See the installation instructions for details.  
Failure to follow these instructions can result in death or serious burns to children and adults.  
Making sure the anti-tip bracket is installed:  
Anti-Tip  
Bracket  
Slide range forward.  
Look for the anti-tip bracket securely attached to floor or wall.  
Slide range back so rear range foot is under anti-tip bracket.  
Range Foot  
State of California Proposition 65 Warnings:  
WARNING: This product contains a chemical known to the State of California to cause cancer.  
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
WARNING: To reduce the risk of fire, electrical shock,  
Protective Liners – Do not use aluminum foil to line surface  
unit drip bowls or oven bottoms, except as suggested in  
the manual. Improper installation of these liners may result  
in a risk of electric shock, or fire.  
injury to persons, or damage when using the range, follow  
basic precautions, including the following:  
WARNING: TO REDUCE THE RISK OF TIPPING OF  
THE RANGE, THE RANGE MUST BE SECURED BY  
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK  
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE  
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET  
SECURELY ATTACHED TO FLOOR OR WALL, AND  
SLIDE RANGE BACK SO REAR RANGE FOOT IS  
UNDER ANTI-TIP BRACKET.  
Glazed Cooking Utensils – Only certain types of glass,  
glass/ceramic, ceramic, earthenware, or other glazed  
utensils are suitable for range-top service without breaking  
due to the sudden change in temperature.  
Utensil Handles Should Be Turned Inward and Not Extend  
Over Adjacent Surface Units – To reduce the risk of burns,  
ignition of flammable materials, and spillage due to  
unintentional contact with the utensil, the handle of a  
utensil should be positioned so that it is turned inward, and  
does not extend over adjacent surface units.  
CAUTION: Do not store items of interest to children in  
cabinets above a range or on the backguard of a range –  
children climbing on the range to reach items could be  
seriously injured.  
Do Not Soak Removable Heating Elements – Heating  
Proper Installation – Be sure the range is properly installed  
elements should never be immersed in water.  
and grounded by a qualified technician.  
Do Not Cook on Broken Cooktop – If cooktop should  
break, cleaning solutions and spillovers may penetrate the  
broken cooktop and create a risk of electric shock. Contact  
a qualified technician immediately.  
Never Use the Range for Warming or Heating the Room.  
Do Not Leave Children Alone – Children should not be left  
alone or unattended in area where the range is in use.  
They should never be allowed to sit or stand on any part of  
the range.  
Clean Cooktop With Caution – If a wet sponge or cloth is  
used to wipe spills on a hot cooking area, be careful to  
avoid steam burn. Some cleaners can produce noxious  
fumes if applied to a hot surface.  
Wear Proper Apparel – Loose-fitting or hanging garments  
should never be worn while using the range.  
Use Care When Opening Door – Let hot air or steam  
escape before removing or replacing food.  
User Servicing – Do not repair or replace any part of the  
range unless specifically recommended in the manual. All  
other servicing should be referred to a qualified technician.  
Do Not Heat Unopened Food Containers – Build-up of  
pressure may cause container to burst and result in injury.  
Storage in or on the Range – Flammable materials should  
not be stored in an oven or near surface units.  
Keep Oven Vent Ducts Unobstructed.  
Do Not Use Water on Grease Fires – Smother fire or flame  
or use dry chemical or foam-type extinguisher.  
Placement of Oven Racks – Always place oven racks in  
desired location while oven is cool. If rack must be moved  
while oven is hot, do not let potholder contact hot heating  
element in oven.  
Use Only Dry Potholders – Moist or damp potholders on  
hot surfaces may result in burns from steam. Do not let  
potholder touch hot heating elements. Do not use a towel  
or other bulky cloth.  
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR  
SURFACES OF OVEN – Heating elements may be hot even  
though they are dark in color. Interior surfaces of an oven  
become hot enough to cause burns. During and after use,  
do not touch, or let clothing or other flammable materials  
contact heating elements or interior surfaces of oven until  
they have had sufficient time to cool. Other surfaces of the  
appliance may become hot enough to cause burns – among  
these surfaces are oven vent openings and surfaces near  
these openings, oven doors, and windows of oven doors.  
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR  
UNITS – Surface units may be hot even though they are  
dark in color. Areas near surface units may become hot  
enough to cause burns. During and after use, do not touch,  
or let clothing or other flammable materials contact surface  
units or areas near units until they have had sufficient time  
to cool. Among those areas are the cooktop and surfaces  
facing the cooktop.  
For self-cleaning ranges –  
Use Proper Pan Size – The range is equipped with one or  
more surface units of different size. Select utensils having  
flat bottoms large enough to cover the surface unit heating  
element. The use of undersized utensils will expose a  
portion of the heating element to direct contact and may  
result in ignition of clothing. Proper relationship of utensil to  
burner will also improve efficiency.  
Do Not Clean Door Gasket – The door gasket is essential  
for a good seal. Care should be taken not to rub, damage,  
or move the gasket.  
Do Not Use Oven Cleaners – No commercial oven cleaner  
or oven liner protective coating of any kind should be used  
in or around any part of the oven.  
Never Leave Surface Units Unattended at High Heat  
Settings – Boilover causes smoking and greasy spillovers  
that may ignite.  
Clean Only Parts Listed in Manual.  
Before Self-Cleaning the Oven – Remove broiler pan and  
other utensils.  
Make Sure Reflector Pans or Drip Bowls Are in Place –  
Absence of these pans or bowls during cooking may  
subject wiring or components underneath to damage.  
For units with ventilating hood –  
Clean Ventilating Hoods Frequently – Grease should not  
be allowed to accumulate on hood or filter.  
When flambeing foods under the hood, turn the fan on.  
SAVE THESE INSTRUCTIONS  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
COOKTOP USE  
This manual covers different models. The range you have purchased may have some or all of the items listed. The locations and  
appearances of the items shown here may not match those of your model.  
B
E
F
A
C
D
H
G
A. Surface cooking area locator  
E. Right rear control knob  
B. Left front duel element control knob  
C. Left rear control knob  
F. Right front dual element control knob  
G. Hot surface indicator light  
D. Electronic oven control  
H. Cooktop on indicator light  
REMEMBER: When range is in use or (on some models)  
during the Self-Cleaning cycle, the entire cooktop area may  
become hot.  
Cooktop Controls  
WARNING  
Cooktop On Indicator Lights  
A cooktop On Indicator light is located on the control panel.  
When any surface element is turned on, the light will glow.  
Hot Surface Indicator Light  
A Hot Surface indicator light is located on the control panel. The  
hot surface indicator light will glow as long as any surface  
cooking area is too hot to touch, even after the surface cooking  
area(s) is turned off.  
Fire Hazard  
Turn off all controls when done cooking.  
Failure to do so can result in death or fire.  
Dual Size Element  
The control knobs can be set anywhere between HI and LO. Push  
in and turn to setting. Use the following chart as a guide when  
setting heat levels.  
SETTING  
RECOMMENDED USE  
A
B
Dual Elements  
Large diameter cookware.  
Large quantities of food.  
Home canning.  
HI (High)  
Bring liquid to a boil.  
A. Single size  
B. Dual size  
Medium High  
Hold a rapid boil.  
The dual size elements offer flexibility to cook using different  
sizes of cookware. The single element can be used in the same  
way as a regular element. The dual element combines both the  
inner and outer elements and is recommended for larger  
cookware.  
Quickly brown or sear food.  
Medium  
Maintain a slow boil.  
Fry or sauté foods.  
Cook soups, sauces and gravies.  
Medium Low  
LO (Low)  
Stew or steam food.  
Simmer.  
Keep food warm.  
Melt chocolate or butter.  
Warm Zone  
Keep cooked foods warm.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ceramic Glass  
(on some models)  
The surface cooking area will glow red when an element is on. It  
may cycle on and off to maintain the selected heat level.  
B
A
It is normal for the surface of light colored ceramic glass to  
appear to change color when surface cooking areas are hot. As  
the glass cools, it will return to its original color.  
A. Dual element control - left side  
B. Single element control - right side  
Cleaning off the cooktop before and after each use will help keep  
it free from stains and provide the most even heating. On  
cooktops with light colored ceramic glass, soils and stains may  
be more visible, and may require more cleaning and attention.  
Cooktop cleaner and a cooktop scraper are recommended. For  
more information, see “General Cleaning” section.  
To Use Single Element:  
1. Push in and turn the control knob counterclockwise from the  
OFF position to the Single zone anywhere between HI and  
LO.  
Avoid storing jars or cans above the cooktop. Dropping a  
heavy or hard object onto the cooktop could crack the  
cooktop.  
2. Push in and turn knob to OFF when finished.  
To Use Dual Element:  
1. Push in and turn the control knob clockwise from the OFF  
position to the Dual zone anywhere between HI and LO.  
To avoid damage to the cooktop, do not leave a hot lid on the  
cooktop. As the cooktop cools, air can become trapped  
between the lid and the cooktop, and the ceramic glass could  
break when the lid is removed.  
2. Push in and turn knob to OFF when finished.  
For foods containing sugar in any form, clean up all spills and  
soils as soon as possible. Allow the cooktop to cool down  
slightly. Then, while wearing oven mitts, remove the spills  
using a scraper while the surface is still warm. If sugary spills  
are allowed to cool down, they can adhere to the cooktop  
and can cause pitting and permanent marks.  
Warm Zone  
WARNING  
Food Poisoning Hazard  
To avoid scratches, do not slide cookware or bakeware  
across the cooktop. Aluminum or copper bottoms and rough  
finishes on cookware or bakeware could leave scratches or  
marks on the cooktop.  
Do not let food sit for more than one hour before or  
after cooking.  
Doing so can result in food poisoning or sickness.  
Do not cook popcorn in prepackaged aluminum containers  
on the cooktop. They could leave aluminum marks that  
cannot be removed completely.  
Use the Warm Zone element to keep cooked foods warm.  
One hour is the recommended maximum time to maintain food  
quality.  
To avoid damage to the cooktop, do not allow objects that  
could melt, such as plastic or aluminum foil, to touch any part  
of the entire cooktop.  
Do not use it to heat cold foods.  
The Warm Zone element can be used alone or when any of the  
other surface cooking areas are being used.  
To avoid damage to the cooktop, do not use the cooktop as a  
cutting board.  
The Warm Zone element area will not glow red when cycling on.  
However, the Element On light will glow while the Warm Zone  
element is in use. The Hot Surface light will glow as long as the  
Warm Zone element area is too hot to touch.  
Use cookware about the same size as the surface cooking  
area. Cookware should not extend more than ½" (1.3 cm)  
outside the area.  
Use only cookware and dishes recommended for oven and  
cooktop use.  
B
Cover all foods with a lid or aluminum foil. When warming  
baked goods, allow a small opening in the cover for moisture  
to escape.  
A
To avoid damage to the cooktop, do not use plastic wrap to  
cover food because the plastic wrap may melt.  
C
Use pot holders or oven mitts to remove food.  
A. Surface cooking area  
B. Cookware/canner  
C. ½" (1.3 cm) maximum overhang  
To Use:  
1. To turn on, press WARM ZONE ON. Then press START.  
2. To turn off, press WARM ZONE OFF.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use flat-bottomed cookware for best heat conduction and  
energy efficiency. Cookware with rounded, warped, ribbed or  
dented bottoms could cause uneven heating and poor  
cooking results.  
Use the following chart as a guide for cookware material  
characteristics.  
COOKWARE  
Aluminum  
CHARACTERISTICS  
Determine flatness by placing the straight edge of a ruler  
across the bottom of the cookware. While you rotate the ruler,  
no space or light should be visible between it and the  
cookware.  
Heats quickly and evenly.  
Suitable for all types of cooking.  
Medium or heavy thickness is best for  
most cooking tasks.  
Cookware designed with slightly indented bottoms or small  
expansion channels can be used.  
Cast iron  
Heats slowly and evenly.  
Make sure the bottoms of pots and pans are clean and dry  
before using them. Residue and water can leave deposits  
when heated.  
Good for browning and frying.  
Maintains heat for slow cooking.  
To avoid damage to the cooktop, do not cook foods directly  
on the cooktop.  
Ceramic or  
Ceramic glass  
Follow manufacturer’s instructions.  
Heats slowly, but unevenly.  
Ideal results on low to medium heat  
settings.  
Home Canning  
When canning for long periods, alternate the use of surface  
cooking areas, elements or surface burners between batches.  
This allows time for the most recently used areas to cool.  
Copper  
Heats very quickly and evenly.  
Earthenware  
Follow manufacturer’s instructions.  
Use on low heat settings.  
Center the canner on the grate or largest surface cooking  
area or element. On electric cooktops, canners should not  
extend more than ½" (1.3 cm) beyond the surface cooking  
area or element.  
Porcelain  
enamel-on-  
steel or cast  
iron  
See stainless steel or cast iron.  
Do not place canner on 2 surface cooking areas, elements or  
surface burners at the same time.  
On ceramic glass models, use only flat-bottomed canners.  
Stainless steel  
Heats quickly, but unevenly.  
For more information, contact your local agricultural  
department. Companies that manufacture home canning  
products can also offer assistance.  
A core or base of aluminum or copper  
on stainless steel provides even  
heating.  
Cookware  
IMPORTANT: Do not leave empty cookware on a hot surface  
cooking area, element or surface burner.  
Ideal cookware should have a flat bottom, straight sides, and a  
well-fitting lid and the material should be of medium-to-heavy  
thickness.  
Rough finishes may scratch the cooktop. Aluminum and copper  
may be used as a core or base in cookware. However, when used  
as a base they can leave permanent marks on the cooktop.  
Cookware material is a factor in how quickly and evenly heat is  
transferred, which affects cooking results. A nonstick finish has  
the same characteristics as its base material. For example,  
aluminum cookware with a nonstick finish will take on the  
properties of aluminum.  
Cookware with nonstick surfaces should not be used under the  
broiler.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ELECTRONIC OVEN CONTROLS  
This manual covers different models. The range you have purchased may have some or all of the items listed. The locations and  
appearances of the items shown here may not match those of your model.  
A
B
C
D
E
F
G
P
O
N
M
L
K
J
I
H
A. Upper oven settings  
B. Oven display  
C. Temperature/Time adjust  
D. Upper oven start  
F. Steam/Precise clean  
G. Oven light/control lock  
H. Warm zone  
I. Lower oven cancel  
J. Lower oven start  
K. Settings  
L. Clock  
M. Timer set/off  
N. Start time  
O. Cook time  
E. Upper oven cancel  
P. Lower oven settings  
3. Press TIMER SET/OFF. The colon stops flashing, and the time  
begins counting down. “TIMER STARTED” will scroll down  
the upper text display area.  
Display  
When power is first supplied to the range, or if a power failure has  
occurred, 12:00 will appear on the display. See Clock” in the  
Settings” section to set time of day.  
The last minute of the timer countdown will be displayed in  
seconds.  
At the end of the set time, one long beep will sound, and  
TIMER End” will be displayed.  
When the oven is not in use, the display shows the time of day,  
unless the oven is in Energy Saver mode.  
4. Press TIMER SET/OFF to clear the display.  
NOTE: A reminder beep will sound until the Kitchen Timer is  
canceled.  
Cancel  
The Cancel pad stops any function except the Clock, Timer and  
Control Lock.  
To Cancel:  
Press the TIMER SET/OFF pad.  
Oven Lights  
While the oven doors are closed, press OVEN LIGHT to turn the  
lights on and off. The oven light will come on when the oven door  
is opened. The oven lights will not come on during the Self-Clean  
cycle.  
Settings  
Energy Saver  
The Energy Saver mode deactivates the display to reduce energy  
consumption.  
Kitchen Timer  
The Kitchen Timer can be set in hours or minutes up to 9 hours  
and 59 minutes, and counts down the set time. The Kitchen  
Timer does not start or stop the oven.  
To Activate the Energy Saver Mode:  
1. Press and hold SETTINGS for 3 seconds. Energy saver on.”  
will appear in the upper text area.  
To Set:  
2. The setting will be activated after 5 minutes.  
1. Press TIMER SET/OFF pad.  
Any mode may be used with the range in Energy Saver by  
simply selecting the desired mode.  
Set TIMER” will scroll down the upper text display area and  
the clock will display “--:--” with the colon flashing.  
To Deactivate the Energy Saver Mode:  
1. Press and hold SETTINGS for 3 seconds. Energy saver off.”  
will appear in the upper text area.  
2. Press the Temp/Time “up” or “down” arrow pads until the  
desired time is reached.  
Press TIMER” will scroll down the upper text display area.  
2. The clock will reappear in the display, and the range can be  
operated as usual.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Keypress Tone On or Off  
Fahrenheit and Celsius  
The keypress tone is factory set for On but can be changed to  
Off.  
The temperature is factory preset to Fahrenheit, but can be  
changed to Celsius.  
1. Press SETTINGS five times until KEYPRESS TONE” scrolls  
from top to bottom in the upper text area and “ON. Press (^)  
for OFF” scrolls twice from right to left in the lower text area.  
1. Press SETTINGS once.  
TEMP UNIT” appears in the upper text area while  
Fahrenheit press (^) for Celsius” will scroll twice from right to  
left in the lower text area.  
2. Press the Temp/Time “up” arrow pad to turn the keypress  
tone Off.  
OFF Selected” will scroll twice from right to left in the lower  
text area. The keypress tone has now been turned off.  
2. Press the Temp/Time “up” arrow pad to change the  
temperature unit setting.  
Adjusting Reminder Tone On or Off  
CELSIUS. Press (^) for Fahrenheit” will scroll twice from right  
to left in the lower text area.  
The reminder tone is factory set for On but can be changed to  
Off.  
3. CELSIUS Selected” will scroll right to left in the lower text  
1. Press SETTINGS six times until REMINDER TONE” scrolls  
from top to bottom in the upper text area and “ON. Press (^)  
to OFF” scrolls twice from right to left in the lower text area.  
area. The temperature units have been changed.  
Tones  
2. Press the Temp/Time “up” arrow pad to turn the reminder  
tone Off.  
Tones are audible signals, indicating the following:  
OFF Selected” will scroll twice from right to left in the lower  
text area. The reminder tone has now been turned off.  
Basic Functions  
One tone  
Valid pad press  
Clock  
End of Kitchen Timer (long tone)  
Function has been entered  
The clock can be set to display time in a 12-hour or 24-hour  
format. The clock is set at the factory for the 12-hour format.  
Two tones  
To Change the Clock to 24-Hour Format:  
Oven is preheated  
1. Press SETTINGS seven times until 12/24 HOUR” appears in  
the upper text area and “12HR Press (^) for 24Hr” scrolls  
twice from right to left in the lower text area.  
Three tones  
Invalid pad press  
2. Press the Temp/Time “up” arrow pad once to select 24 hour  
Four tones  
and again to select 12 hour.  
End of cycle  
3. Wait 30 seconds or press CANCEL to accept the setting.  
To Set the Clock:  
Adjusting Sound On or Off  
The oven sound is factory set for On but can be changed to Off.  
Before setting, make sure the oven and Kitchen Timer are off.  
1. Press CLOCK. Set Time” appears in the upper text area.  
1. Press SETTINGS twice until SOUND” appears in the upper  
text area and ON. Press (^) for OFF” scrolls twice from right  
to left in the lower text area.  
2. Press the Temp/Time “up” or “down” arrow pads until the  
desired time is displayed.  
2. Press the Temp/Time “up” arrow pad to turn the sound Off.  
3. Press CLOCK” appears in the upper text area, and “PUSH  
OFF. Press (^) for ON” will scroll twice from right to left in the  
lower text area. The sound has now been turned off.  
START” scrolls from bottom to top in the lower text area.  
4. Press CLOCK or START. Time Set” will scroll from top to  
bottom in the upper text area for 5 seconds. Once it  
disappears, the time is set.  
3. OFF Selected” scrolls from right to left in the lower text area.  
The sound has now been turned off.  
Adjusting Sound Volume  
The oven sound is factory set for Low but can be changed to  
High.  
Sabbath Mode  
1. Press SETTINGS three times until SOUND VOLUME” scrolls  
from top to bottom in the upper text area and “LOW Press (^)  
for HIGH” scrolls twice from right to left in the lower text area.  
Sabbath Mode is used to configure the oven system so that  
certain features and modes are disabled or defeatured. By  
enabling Sabbath Mode, the oven will conform to Star-K Jewish  
Sabbath requirements.  
2. Press the Temp/Time “up” arrow pad to turn the sound High.  
HIGH. Press (^) for Low” will scroll twice from right to left in  
the lower text area.  
The oven is factory set with Sabbath Mode Off.  
To Enable Sabbath mode (one time only):  
3. HIGH Selected” scrolls twice from right to left in the lower  
1. Press SETTINGS eight times until SABBATH” appears in the  
text area. The sound has now been changed to high setting.  
upper text area.  
Adjusting End Tone On or Off  
2. Press the Temp/Time “up” arrow pad to enable Sabbath  
The end tone is factory set for On but can be changed to Off.  
Mode.  
1. Press SETTINGS four times until END TONE” scrolls from  
top to bottom in the upper text area and “ON. Press (^) for  
OFF” scrolls twice from right to left in the lower text area.  
ON Selected” scrolls twice in the upper text area. The oven  
is now in Sabbath Mode.  
2. Press the Temp/Time “up” arrow pad to turn the end tone off.  
OFF. Press (^) for ON” will scroll twice from right to left in the  
lower text area.  
3. OFF Selected” scrolls twice in the lower text area. The End  
Tone has now been turned off.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the following chart as a guide.  
12-Hour Auto Off  
ADJUSTMENT °F  
(ADJUSTMENT °C)  
COOKS FOOD  
The oven control is set to automatically shut off the oven  
12 hours after the oven turns on. This will not interfere with any  
timed or delayed cook function.  
10°F (6°C)  
...a little more  
...moderately more  
...much more  
20°F (12°C)  
30°F (17°C)  
-10°F (-6°C)  
-20°F (-12°C)  
-30°F (-17°C)  
To Cancel 12-Hour Auto Off:  
1. Press SETTINGS nine times until 12 Hr AUTO_OFF” appears  
in the upper text area and “ON. Press (^) to OFF” scrolls  
twice from right to left in the lower text area.  
...a little less  
2. Press the Temp/Time “up” arrow pad to turn off the 12-hour  
...moderately less  
...much less  
Auto Off feature.  
OFF. Press (^) to ON” scrolls twice from right to left in the  
lower text area.  
To Adjust Oven Temperature Calibration:  
3. OFF selected” scrolls twice from right to left in the lower text  
1. Press SETTINGS 11 times until TEMP CALIB” appears in the  
upper text area, and “UPPER CALIBRATE. Press (^) for Lower  
calibrate or push START” scrolls twice from right to left in the  
lower text area.  
area. The feature has been turned off.  
Language  
2. Press START to calibrate the upper oven. “UPPER calibrate  
The Language is factory preset to English but can be changed to  
French or Spanish.  
selected” scrolls twice from right to left in the lower text area.  
UPPER calibrate” appears in the upper text area, and “Press  
^
To Change the Language to French:  
(^) or ( ) for offset” scrolls twice from right to left in the lower  
1. Press SETTINGS 10 times until LANGUAGE” appears in the  
text area.  
upper text area, and “ENGLISH. Press (^) for French Press  
OR  
^
( ) for Spanish” scrolls twice from right to left in the lower  
Press the Temp/Time “up” arrow pad to calibrate the lower  
oven. LOWER calibrate selected” scrolls twice from right to  
text area.  
2. Press the Temp/Time “up” arrow pad to select French.  
left in the lower text area. “Lower calibrate” is shown in the  
^
If French is selected, “FRENCH. Press (^) for English Press  
upper text area, and “Press (^) or ( ) for offset” scrolls twice  
^
( ) for Spanish” scrolls twice from right to left in the lower  
from right to left in the lower text area.  
text area.  
3. Press the Temp/Time “up” or “down” arrow pad to increase  
or decrease the temperature in 5°F (3°C) increments. The  
adjustment can be set between 30°F (17°C) and -30°F  
(-17°C).  
3. FRENCH Selected” will scroll twice from right to left in the  
lower text area. The language displayed will now be French.  
To Change the Language to Spanish:  
4. Press START to set the adjustment and exit the Temperature  
1. Press SETTINGS 10 times until LANGUAGE” appears in the  
Calibration menu.  
upper text area, and “ENGLISH. Press (^) for French Press  
( ) for Spanish” scrolls twice from right to left in the lower  
^
text area.  
Control Lockout  
2. Press the Temp/Time “down” arrow pad to select Spanish.  
The oven controls can be locked out to avoid unintended use of  
the oven.  
If Spanish is selected, “SPANISH. Press (^) for French Press  
^
( )for English” scrolls twice from right to left in the lower text  
The oven controls cannot be locked if the oven is in use, or the  
oven temperature is 400°F (205°C) or above.  
area.  
3. SPANISH Selected” will scroll twice from right to left in the  
The current time of day will remain in the display when the  
controls are locked.  
lower text area. The language displayed will now be Spanish.  
To Lock Controls:  
Oven Temperature Control  
1. Press and hold the Oven Light pad for 3 seconds or until  
CONTROL LOCKED” scrolls in the upper text area.  
CONTROL LOCKED” scrolls while the control is locking,  
then “LOCKED” is displayed.  
The oven provides accurate temperatures; however, it may cook  
faster or slower than your previous oven, so the temperature  
calibration can be adjusted. It can be changed in Fahrenheit or  
Celsius.  
LOCKED” remains lit in the display.  
Temperature adjustment applies to upper or lower ovens.  
A minus sign means the oven will be cooler by the displayed  
amount. The absence of a minus sign means the oven will be  
warmer by the displayed amount.  
To Unlock Controls:  
1. Press and hold OVEN LIGHT for 3 seconds.  
UNLOCKING” will scroll in the display for 3 seconds while  
the controls are unlocking, then the time of day is displayed.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVEN USE  
Odors and smoke are normal when the oven is used the first few  
times, or when it is heavily soiled.  
Rack Positions - Upper Oven  
IMPORTANT: The health of some birds is extremely sensitive to  
the fumes given off. Exposure to the fumes may result in death to  
certain birds. Always move birds to another closed and well-  
ventilated room.  
2
1
The upper and lower ovens have rapid and standard preheat  
options. When only one oven is used (either upper or lower) the  
oven in use will default to the rapid preheat option. The rapid  
preheat option is only recommended for single-rack baking.  
Baking  
When both ovens are used simultaneously, the ovens will default  
to the standard preheat option. The standard preheat option is  
recommended for multi-rack baking in the lower oven.  
FOOD  
RACK POSITION  
Large dishes  
Most foods  
1
2
When the lower oven is used independently, the oven will default  
to the rapid preheat option. To use the standard preheat option  
for multi-rack baking in the lower oven, it can be selected during  
Bake or Convection Bake operation.  
Broiling  
FOOD  
RACK POSITION  
To toggle between single or multi-rack baking, press START after  
beginning the Bake or Convection Bake mode.  
Broiling  
1
Aluminum Foil  
IMPORTANT: To avoid permanent damage to the oven bottom  
finish, do not line the oven bottom with any type of foil, liner or  
cookware.  
Rack Positions - Lower Oven  
For best cooking results, do not cover entire rack with foil  
because air must be able to move freely.  
5
4
3
2
1
To catch spills, place foil on rack below dish. Make sure foil is  
at least ¹⁄₂" (1.3 cm) larger than the dish and that it is turned  
up at the edges.  
Positioning Racks and Bakeware  
IMPORTANT: To avoid permanent damage to the porcelain  
finish, do not place food or bakeware directly on the oven door or  
bottom.  
Traditional Cooking  
FOOD  
RACK POSITION  
Large roasts, turkeys, angel food, bundt 1 or 2  
and tube cakes, quick breads, pies  
Racks  
Position racks before turning on the oven.  
Do not position racks with bakeware on them.  
Make sure racks are level.  
Yeast breads, casseroles, meat and  
poultry and 2-rack baking  
2
Cookies, biscuits, muffins, cakes,  
1-rack baking  
2 or 3  
The upper oven is equipped with 1 flat rack.  
The lower oven is equipped with 2 flat racks.  
2-rack baking  
4 and 5, or 2 and 4,  
or 2 and 5  
To Remove Oven Racks:  
Flat Racks: Pull rack out to the stop position, raise the front edge,  
and then lift out.  
Convection Cooking (on some models)  
FUNCTION  
NUMBER OF  
RACK  
RACKS USED POSITION(S)  
Convection baking or  
roasting  
1
1, 2 or 3  
Convection baking  
2
2 and 4  
To Replace Oven Racks:  
Flat Racks: Place rack on the rack support in the oven. Tilt the  
front edge up slightly, and slide rack back until it clears the stop  
position. Lower front and slide back into the oven.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BAKEWARE  
To cook food evenly, hot air must be able to circulate. Allow  
2" (5.0 cm) of space around bakeware and oven walls. Use the  
following chart as a guide.  
Meat Thermometer  
On models without a temperature probe, use a meat  
thermometer to determine whether meat, poultry and fish, are  
cooked to the desired degree of doneness. The internal  
temperature, not appearance, should be used to determine  
doneness. A meat thermometer is not supplied with this  
appliance. Follow manufacturer's directions for using a meat  
thermometer.  
NUMBER  
POSITION ON RACK  
OF PAN(S)  
1
Center of rack.  
2
Side by side or slightly staggered.  
3 or 4  
Opposite corners on each rack. Make sure that  
no bakeware piece is directly over another.  
Oven Vents  
A
Bakeware  
The bakeware material affects cooking results. Follow  
manufacturer’s recommendations and use the bakeware size  
recommended in the recipe. Use the following chart as a guide.  
BAKEWARE/  
RESULTS  
RECOMMENDATIONS  
A. Oven vents  
The oven vents release hot air and moisture from the ovens, and  
should not be blocked or covered. Blocking or covering the vents  
will cause poor air circulation, affecting cooking and cleaning  
results. Do not set plastics, paper or other items that could melt  
or burn near the oven vents.  
Light colored  
aluminum  
Use temperature and time  
recommended in recipe.  
Light golden crusts  
Even browning  
Dark aluminum and  
other bakeware with  
dark, dull and/or  
nonstick finish  
May need to reduce baking  
temperatures slightly.  
Baking  
Before baking, position racks according to the “Positioning  
Racks and Bakeware” section.  
Use suggested baking time.  
If only one oven is to be used, that oven will preheat more  
quickly.  
For pies, breads and casseroles,  
use temperature recommended in  
recipe.  
Brown, crisp  
crusts  
Allow at least ½" (1.3 cm) between the baking pan or  
casserole and the top element in the upper oven. Loaf, angel  
food or bundt pans are not recommended in the upper oven.  
Place rack in center of oven.  
Insulated cookie  
sheets or baking  
pans  
Place in the bottom third of oven.  
May need to increase baking time.  
Depending on the model, the convect fan and element may  
operate during the bake mode.  
When preheating with a baking/pizza stone inside the upper  
oven, do not set oven above 400°F (205°C). To use baking/  
pizza stones at temperatures above 400°F (205°C) in the  
upper oven, put stone in after the preheat beep.  
Little or no bottom  
browning  
Stainless steel  
May need to increase baking time.  
Follow manufacturer’s instructions.  
Light, golden  
crusts  
The back part of the lower oven bake element will not glow  
red during baking. This is normal.  
Uneven browning  
Use only 1 rack in the upper oven.  
Stoneware/Baking  
stone  
For ovens with an exposed bake element, rack position 2  
may be used for baking cookies.  
Crisp crusts  
Ovenproof  
glassware, ceramic  
glass or ceramic  
May need to reduce baking  
temperatures slightly.  
Brown, crisp  
crusts  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Bake or Roast:  
1. Press the BAKE keypad for desired oven.  
Broiling  
“BAKE” will scroll in the upper or lower text area (depending  
on oven selection), and 350°F (175°C) will be displayed.  
Broiling uses direct radiant heat to cook food. The lower the  
temperature, the slower the cooking. Thicker cuts and unevenly  
shaped pieces of meat, fish and poultry may cook better at lower  
broiling temperatures.  
After 3 seconds, “Set temp or” will scroll in the selected oven  
text area, followed by “Push START.”  
For best results, use a broiler pan and grid. They are  
designed to drain juices and help avoid spatter and smoke.  
2. Press the Temp/Time “up” or “down” arrow pads until the  
desired temperature is displayed.  
If you would like to purchase a broiler pan, one may be  
ordered. See “Assistance or Service” section to order. Ask for  
Part Number 4396923.  
NOTE: The temperature may be changed at any time by  
pressing the Temp/Time “up” or “down” arrow pads until the  
desired temperature is displayed and then START. Changing  
the temperature once food is placed in the oven could affect  
the preheat cycle.  
For proper draining, do not cover the grid with foil. The  
bottom of the pan may be lined with aluminum foil for easier  
cleaning.  
3. (Optional) If a Set Cooking Time is desired, press COOK  
TIME. Press the Temp/Time “up” or “down” arrow pads to  
adjust the cook time by 5-minute increments until the desired  
time is displayed.  
Trim excess fat to reduce spattering. Slit the remaining fat on  
the edges to avoid curling.  
Select HI/550°F (288°C) broil for most broiling. Select  
LO/450°F (232°C) broil for low-temperature broiling of longer  
cooking foods such as poultry to avoid overbrowning.  
Push START” will scroll in the selected oven text area.  
4. Press START to begin preheating oven.  
“Baking” will appear in the selected oven text area.  
Pull out oven rack to stop position before turning or removing  
food. Use tongs to turn food to avoid the loss of juices. Very  
thin cuts of fish, poultry or meat may not need to be turned.  
After 3 seconds, “Rapid Preheating for single rack baking”  
will scroll in the selected oven text area until the set  
temperature is reached.  
After broiling, remove the pan from the oven when removing  
the food. Drippings will bake on the pan if left in the heated  
oven, making cleaning more difficult.  
5. When the preheat cycle is complete, “Preheat done insert  
food for one rack baking only” will scroll twice in the selected  
oven text area.  
Before broiling, position rack according to the Broiling Chart.  
Position food on grid in the broiler pan, then place it in the center  
of the oven rack. Close the door.  
“Bake” will scroll in the selected oven text area until CANCEL  
for the selected oven is pressed.  
6. Place food in the oven.  
To Broil Using Hi/Low Temperature Settings:  
1. Place food in the upper or lower oven. Preheating is not  
necessary.  
7. Press UPPER or LOWER CANCEL when finished.  
8. Remove food from the oven.  
2. Position oven door to broil stop position.  
3. Press UPPER or LOWER BROIL.  
“BROIL” will scroll in the selected oven text area, and “HI” will  
be displayed.  
After 3 seconds, “Set temp or” will scroll in the upper text  
area, followed by “Push START.”  
4. Press the Temp/Time “up” or “down” arrow pads to adjust  
the broil temperature setting to HI or LO.  
NOTE: The broil temperature may be changed at any time by  
pressing the Temp/Time “up” or “down” arrow pads until the  
desired temperature is displayed and then START. Changing  
the temperature once food is placed in the oven could affect  
the preheat cycle.  
5. Press START.  
“Broiling” will scroll in the upper text area and remains there  
until the set temperature is reached.  
“BROIL” will scroll in the upper text area until UPPER or  
LOWER CANCEL is pressed.  
6. Press UPPER or LOWER CANCEL when finished.  
7. Remove food from the oven.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BROILING CHART  
It is not necessary to preheat oven(s) when broiling. Times are guidelines only and may need to be adjusted for individual tastes. Turn  
meat halfway through cooking time. Recommended rack positions are numbered from the bottom (1) to the top (5). For diagram, see  
the “Positioning Racks and Bakeware” section.  
UPPER OVEN  
LOWER OVEN  
RACK  
POSITION  
COOK TIME  
(minutes)  
RACK  
POSITION  
COOK TIME  
(minutes)  
FOOD  
SETTING  
SETTING  
Steak  
1" (2.5 cm) thick  
medium  
1
HI  
22-28  
4
HI  
15-19  
Ground meat patties  
4 oz (113 g), ³ꢀ₄" (2.0 cm) thick  
up to 12, well-done  
1
1
HI  
HI  
18-22  
20-25  
4
4
HI  
HI  
15-19  
15-19  
up to 6, well done  
Pork chops  
1" (2.5 cm) thick,  
well-done  
1
1
HI  
27-31  
40-50  
4
HI  
22-27  
20-24  
Chicken  
bone-in, skin-on breast pieces  
well-done  
LO  
3 or 4  
LO  
Fish*  
Filets, flaky  
Steaks, 1" (2.5 cm) thick, flaky  
1
1
LO  
LO  
8-12  
18-22  
4
4
LO  
LO  
8-13  
10-16  
*When broiling fish, spray broil pan with cooking oil. Do not turn fish filets.  
Toasting - Upper Oven Only  
Convection Cooking - Lower Oven Only  
(on some models)  
(on some models)  
For toasting bread and products that are toasted in a toaster or  
toaster oven.  
During convection cooking, the fan provides increased hot air  
circulation continuously and more consistently throughout the  
oven. The movement of heated air around the food helps to  
speed up cooking by penetrating the cooler outer surfaces. Food  
cooks more evenly, browning and crisping outer surfaces while  
sealing moisture inside.  
Lower oven cannot be operated while upper oven is toasting.  
If the lower oven is operating when the Toast pad is pressed,  
a beep will sound.  
Toasting is based on time not temperature.  
During the Convect function, the ring element operates, along  
with the fan, to provide an indirect source of heat in the oven  
cavity. If the oven door is opened during convection cooking or  
preheating, the element(s) and fan will turn off immediately. Once  
the door is closed, they will come back on.  
Frozen foods should not be toasted in the oven.  
Toasting times will be shorter when the oven is hot or when  
repeated toasting functions are done.  
For optimal results when toasting up to 9 pieces of bread or other  
similar items, see the following illustration.  
It is important not to cover foods so that surface areas remain  
exposed to the circulating air, allowing browning and crisping.  
Keep heat loss to a minimum by opening the oven door only  
when necessary.  
Choose cookie sheets without sides and roasting pans with  
lower sides to allow air to move freely around the food.  
Test baked goods for doneness a few minutes before the  
minimum cooking time with a method such as a toothpick.  
1. Press TOAST.  
Use a meat thermometer to determine the doneness of meats  
and poultry. Check the temperature of pork and poultry in 2 or  
3 different places, including the thickest part.  
TOAST” will scroll in the upper text area, then SET LEVEL”  
will be displayed.  
Before convection cooking, position the rack(s) according to  
the “Positioning Racks and Bakeware” section.  
2. Press the Temp/Time “up” or “down” arrow pads to adjust  
the toast time until the desired time is displayed.  
When using more than one rack, position bakeware/  
cookware on the racks to allow movement of the fan  
circulated air around the food. See the “Positioning Racks  
and Bakeware” section.  
PUSH START” will scroll in the upper text area.  
3. Press START.  
TOAST (setting)” will scroll in the upper text area. (setting)”  
is the setting you selected, for example Medium.  
If the oven is full, extra cooking time may be needed.  
For optimal cooking results, do not cover food.  
4. At the end of the set toasting time, “TOASTING COMPLETE”  
will scroll in the upper text area.  
5. Press CANCEL.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When roasting poultry and meat, use a broiler pan and grid. It  
is not necessary to wait for the oven to preheat, unless  
recommended in the recipe. To order a broiling pan, see  
Assistance or Service” section.  
Convection Roasting (on some models)  
When convection roasting, enter your normal roasting  
temperature. The roasting time should be set 15 - 30% less than  
conventional cooking.  
A
B
It is not necessary to preheat the oven for convect roast.  
1. Place food in oven.  
2. Press CONVECT twice.  
CONVECT ROAST” will scroll in the lower text area, and  
325°F (163°C) will be displayed.  
A. Broiler grid  
B. Broiler pan  
Set temp or” will scroll in the lower oven text area, followed  
by “Push START.”  
Preheating  
During the CONVECT preheating cycle, the fan, ring element (on  
some models) and bake burner heat the oven cavity. When  
preheating is finished, the ring element (on some models) cycles  
to maintain the oven temperature while the fan continues to  
constantly circulate the heated air.  
3. Press the Temp/Time “up” or “down” arrow pads until the  
desired temperature is displayed.  
4. Press START.  
CONVECT ROAST” will scroll in the lower oven text area.  
Preheating” appears in the lower oven text area until the set  
temperature is reached.  
Convection Baking (on some models)  
5. When the preheat cycle is complete, “CONVECT ROAST” will  
appear in the lower text area. The set temperature will also be  
displayed.  
Use Convect for single or multiple rack baking. When convection  
baking, reduce the recipe baking temperature by 25°F (15°C).  
6. To change the oven temperature during cooking, press the  
Temp/Time “up” or “down” arrow pads until the desired  
temperature is displayed and then START.  
To Set Convect Bake:  
1. Press CONVECT.  
CONVECT BAKE” will scroll in the lower text area, and 325°F  
(163°C) will be displayed.  
CONVECT ROAST” will scroll in the selected oven text area  
until LOWER CANCEL is pressed.  
Set temp or” will scroll in the lower oven text area, followed  
by “Push START.”  
7. Press LOWER CANCEL when finished.  
8. Remove food from the oven.  
2. Press the Temp/Time “up” or “down” arrow pads until the  
desired temperature is displayed.  
Hold Warm Feature  
3. Press START.  
CONVECT BAKE” will scroll in the lower oven text area, and  
Rapid preheating for single rack Press Start to preheat for  
multi-rack” will scroll in the lower oven text area until the set  
temperature is reached.  
WARNING  
Food Poisoning Hazard  
4. Insert food for one rack baking only” will scroll twice in the  
lower text area once the one rack preheat temperature is  
reached.  
Do not let food sit in oven more than one hour before  
or after cooking.  
Doing so can result in food poisoning or sickness.  
5. Insert food for multi rack baking only” will scroll twice in the  
lower text area once the multi rack preheat temperature is  
reached.  
IMPORTANT: Food must be at serving temperature before  
placing it in the warmed oven. Food may be held up to 1 hour;  
however, breads and casseroles may become too dry if left in the  
oven during the Hold Warm feature.  
6. When the preheat cycle is complete, “CONVECT BAKE” will  
appear in the lower oven text area until LOWER CANCEL is  
pressed.  
The Hold Warm feature allows hot cooked foods to stay at  
serving temperature. It can also be used at the end of a timed  
cook.  
7. Place food in the oven.  
To change the oven temperature during cooking, press the  
Temp/Time “up” or “down” arrow pads until the desired  
temperature is displayed and then START.  
Follow manufacturer’s recommendations when warming empty  
serving bowls and plates.  
8. Press LOWER CANCEL when finished.  
9. Remove food from the oven.  
To Use:  
1. Press the HOLD WARM keypad for desired oven.  
HOLD WARM” will scroll in the upper or lower text area  
(depending on oven selection), and 170°F (77°C) will be  
displayed.  
Set temp or” will scroll in the selected oven text area,  
followed by “Push START.”  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press the Temp/Time “up” or “down” arrow pads to adjust  
the temperature by 5°F (3°C) increments until the desired  
temperature is displayed.  
To Enable Sabbath Mode (one time only):  
1. Open the lower oven door.  
2. Press LOWER CANCEL.  
The temperature can be set from 145°F (63°C) to  
190°F (85°C).  
3. Press and hold the Temp/Time “up” arrow pad for 5 seconds.  
Sabbath on” appears in the upper text display area, and  
Press START to enter” scrolls in the lower text display area.  
NOTE: The temperature may be changed at any time by  
pressing the Temp/Time “up” or “down” arrow pads until the  
desired temperature is displayed and then START. Changing  
the temperature once food is placed in the oven could affect  
the preheat cycle.  
4. Press START to confirm your selection.  
Sabbath Mode - on Holidays press (^) to change temp by  
^
+25F and ( ) to change temp by -25F and press Start” scrolls  
in upper text display area. Sabbath mode is now enabled but  
is not yet active.  
3. Press START.  
Hold Warm” will appear in the text area, and the set  
temperature will be displayed.  
5. Close oven door.  
A bake function for either, or both, ovens must be started  
before Sabbath Mode can be activated. The bake function  
may be set with Cook Time or Delay Start, if desired. See the  
“Baking” or “Delay Start” sections for more information.  
4. HOLDING WARM” and the temperature will be displayed  
while the Hold Warm setting is active or until UPPER or  
LOWER CANCEL is pressed.  
5. Place food in the oven.  
To Disable Sabbath Mode:  
1. Open the lower oven door.  
2. Press LOWER CANCEL.  
To change the oven temperature during cooking, press the  
Temp/Time “up” or “down” arrow pads until the desired  
temperature is displayed and then START.  
3. Press and hold the Temp/Time “up” arrow pad for 5 seconds.  
6. Press UPPER or LOWER CANCEL when finished.  
7. Remove food from the oven.  
Sabbath off” appears in the upper text display area.  
4. Close the oven door.  
To Cancel Hold Warm Feature:  
To Activate or Deactivate an Enabled Sabbath Mode:  
Press UPPER or LOWER CANCEL. Remove food from oven.  
Sabbath Mode can be activated or deactivated at any time  
during an enabled Sabbath Mode.  
Automatic Shutoff/Sabbath Mode  
1. With a timed or untimed Bake function started (see the  
“Baking” section for more information), press and hold TIMER  
SET/OFF for 5 seconds. Sabbath Bake” appears in the  
upper text area for 3 seconds.  
The oven control is set to automatically shut off the oven  
12 hours after the oven is turned on. This feature can be turned  
off to enable Sabbath Mode.  
For a Timed Bake function, the time will also be displayed.  
12 Hour Shutoff Mode is disabled during an active Sabbath  
mode.  
After 3 seconds, the display will continuously scroll “Sabbath  
Mode- on Holidays press (^) to change temp by +25F and  
All tones and chimes are disabled during an active Sabbath  
mode.  
^
( ) to change temp by -25F and press Start.”  
To Adjust Temperature (when Sabbath Mode is running in  
only one oven):  
All cooking and cleaning modes, except for Bake, are  
disabled.  
1. Press the Temp/Time “up” or “down” arrow pads. Each press  
of the pads will increase or decrease temperature by  
25°F (14°C). No temperature will appear in the display.  
All keys are disabled during an active Sabbath mode except  
for Cancel, Start, Timer Set/Off, the Temp/Time “up” and  
“down” arrow pads and Warm Zone Off.  
2. Press and hold START longer than 1 second to set the  
Oven lights status will remain in the state they were in before  
entering into the active Sabbath mode.  
temperature change.  
To Adjust Temperature (when Sabbath Mode is running in  
both ovens):  
Once in the active Sabbath mode, the oven light will not  
respond to the Oven Light key or the door being opened.  
1. Press BAKE for the desired oven.  
Timers are disabled during Active Sabbath mode.  
2. Press the Temp/Time “up” or “down” arrow pads. Each press  
of the pads will increase or decrease temperature by  
25°F (14°C). No temperature will appear in the display.  
Cooktop elements, including the Warm Zone, can be enabled  
for use during Sabbath mode.  
3. Press and hold START longer than 1 second to set the  
NOTE: The Warm Zone must be activated before entering  
Sabbath mode. Once in Sabbath Mode, the Warm Zone  
settings cannot be modified.  
temperature change.  
To Deactivate an Enabled Sabbath Mode:  
1. Press and hold TIMER SET/OFF for 5 seconds to return to  
Cooktop lockout (if applicable) is disabled during the Sabbath  
mode.  
regular baking or press CANCEL to turn off the oven(s).  
If a Power Failure Occurs During Sabbath Mode  
Energy saver is disabled during Sabbath mode.  
If a power failure occurs during Sabbath Mode, the upper text  
area will display “Sabbath.” Press UPPER or LOWER CANCEL to  
exit Sabbath Mode and return to the Automatic Shutoff Mode.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start Time  
3. Press the Temp/Time “up” or “down” arrow pads until the  
desired time is reached.  
WARNING  
Select cooking/cleaning mode” will scroll in the selected  
oven text area for 2 minutes or until a cooking cycle is  
selected.  
Food Poisoning Hazard  
Do not let food sit in oven more than one hour before  
or after cooking.  
4. Press the desired cooking cycle key for upper or lower oven.  
The name of the cooking function will scroll in the selected  
oven text area, and a temperature value will be displayed.  
Doing so can result in food poisoning or sickness.  
After 3 seconds, “Set temp or” will scroll in the selected oven  
text area.  
Start Time allows the oven(s) to cook for a set length of time. It  
allows the oven(s) to be set to turn on at a certain time of day.  
Start Time should not be used for food such as breads and cakes  
because they may not bake properly.  
5. Press the Temp/Time “up” or “down” pads until the desired  
temperature is displayed.  
Push START” will scroll in the selected oven text area.  
Start Time is available with the Upper or Lower oven or with any  
cooking or cleaning function. Before setting, a stop time must be  
entered.  
6. The cook time can be changed if desired by pressing the  
Temp/Time “up” or “down” arrow pads until the desired time  
is reached.  
For more information on using Delay Clean, see To Delay Clean”  
in the “Range Care” section.  
7. Press START.  
The selected cooking cycle will begin, and the name will  
scroll in the upper text area.  
To Set a Delay Start:  
1. Press START TIME.  
8. Place food in the oven.  
PRESS (^) FOR UPPER OVEN” will scroll from top to bottom  
in the upper text area, and PRESS ( ) FOR LOWER OVEN”  
will scroll from bottom to top in the lower text area.  
^
To change the oven temperature during cooking, press the  
Temp/Time “up” or “down” arrow pads until the desired  
temperature is displayed and then START.  
2. Press the Temp/Time “up” or “down” arrow pads to select the  
desired oven.  
The cooking function name will remain in the selected oven  
text area until the cook time countdown is complete. Then  
Cooking Complete” will scroll in the selected oven text area  
until UPPER or LOWER CANCEL is pressed or the oven door  
is opened.  
“--:--” will be displayed, and “Set starting time. Push START”  
will scroll from right to left in the selected oven text area for  
2 minutes or until the Temp/Time “up” or “down” arrow pads  
are pressed again.  
9. Press UPPER or LOWER CANCEL when finished.  
10. Remove food from the oven.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RANGE CARE  
Self-Cleaning Cycle  
(on some models)  
How the Cycle Works  
IMPORTANT: The heating and cooling of porcelain on steel in the  
oven may result in discoloring, loss of gloss, hairline cracks and  
popping sounds.  
WARNING  
The Self-Cleaning cycle uses very high temperatures, burning soil  
to a powdery ash.  
The oven is preset for a 3 hour clean cycle; however, the time can  
be changed. Suggested clean times are 2 hours for light soil and  
between 3 hours and 4 hours for average to heavy soil.  
Burn Hazard  
Once the oven has completely cooled, remove ash with a damp  
cloth. To avoid breaking the glass, do not apply a cool damp  
cloth to the inner door glass before it has completely cooled.  
Do not touch the oven during the Self-Cleaning cycle.  
Keep children away from oven during  
Self-Cleaning cycle.  
The oven light will not work during the Self-Cleaning cycle.  
When LOCK” shows in the display, the door cannot be opened.  
To avoid damage to the door, do not force the door open when  
LOCK” is displayed.  
Failure to follow these instructions can result in burns.  
IMPORTANT: The health of some birds is extremely sensitive to  
the fumes given off during the Self-Cleaning cycle. Exposure to  
the fumes may result in death to certain birds. Always move birds  
to another closed and well-ventilated room.  
If an oven door is left open, “Door open clean cancelled” will  
appear in the display and a signal will beep. Close the door and  
press CLEAN.  
Self-clean the oven before it becomes heavily soiled. Heavy soil  
results in longer cleaning and more smoke.  
To Self-Clean:  
1. Close the oven door.  
Keep the kitchen well-ventilated during the Self-Cleaning cycle to  
help get rid of heat, odors, and smoke.  
2. Press STEAM/PRECISE CLEAN.  
PRESS (^) FOR UPPER OVEN” will scroll in the upper oven  
text area and PRESS ( ) FOR LOWER OVEN” will scroll in  
the lower oven text area.  
^
Do not block the oven vent(s) during the Self-Cleaning cycle. Air  
must be able to move freely. Depending on your model, see  
Oven Vent” or “Oven Vents” section.  
3. Press the Temp/Time “up” or “down” arrow pads to select the  
Do not clean, rub, damage or move the oven door gasket. The  
door gasket is essential for a good seal.  
desired oven.  
REMOVE RACKS” will scroll in the selected oven text area  
for 5 seconds, followed by “SELECT OPTION.” In the lower  
oven text area, PRESS (^) or ( ) KEY” will scroll from right to  
left.  
Prepare Oven:  
^
Remove the broiler pan, grid, cookware and bakeware and,  
on some models, the temperature probe from the oven.  
4. Press the Temp/Time “up” or “down” arrow pad until  
PRECISE CLEAN” appears in the upper text display area,  
and PUSH START” appears in the lower text display area.  
Remove oven racks to keep them shiny and easy to slide.  
See General Cleaning” section for more information.  
Remove any foil from the oven because it may burn or melt,  
damaging the oven.  
5. Press START.  
SELECT LEVEL” appears in the upper text display area.  
^
Hand clean inside door edge and the 1½" (3.8 cm) area  
around the inside oven cavity frame, being certain not to  
move or bend the gasket. This area does not get hot enough  
during self-cleaning to remove soil. Do not let water, cleaner,  
etc., enter slots on door frame. Use a damp cloth to clean this  
area.  
PRESS (^) or ( ) KEY” will scroll from right to left in the lower  
text area.  
6. Press the Temp/Time “up” or “down” arrow pad until the  
desired cleaning level scrolls in the upper text display area  
and PUSH START” scrolls in the lower text display area.  
7. Press START.  
Wipe out any loose soil to reduce smoke and avoid damage.  
At high temperatures, foods react with porcelain. Staining,  
etching, pitting or faint white spots can result. This will not  
affect cooking performance.  
8. UNLOCK IN XXX” will scroll in the upper or lower text area  
(depending on oven selection). LOCKING” will scroll until the  
door is locked.  
After the door is lock, “CLEAN UPPER” or CLEAN LOWER”  
will scroll in the selected oven text area until the clean cycle is  
finished.  
Prepare Cooktop:  
Remove plastic items from the cooktop because they may  
melt.  
When the self-clean cycle ends:  
IMPORTANT:  
CLN COMPLETE will scroll in the selected oven text area. After  
5 seconds, “OVEN COOLING” will scroll in the display until the  
oven temperature falls below 500°F (260°C).  
Oven temperature must be below 400°F (205°C) to program a  
clean cycle.  
Only 1 oven can be cleaned at a time.  
UNLOCKING” will be displayed until the oven door unlocks and  
the lock icon turns off.  
The Warm Zone element will not function during self clean.  
Both oven doors lock when either oven is being cleaned.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Delay Start Self-Clean:  
Before delay starting Self-Clean, make sure the oven door is  
completely closed or it will not lock and the cycle will not begin.  
SteamClean  
(on some models)  
1. Press START TIME.  
The SteamClean feature is designed for light oven cavity bottom  
cleaning on models that have hidden bake in both ovens.  
PRESS (^) FOR UPPER OVEN” will scroll in the upper text  
^
area, and PRESS ( ) FOR LOWER OVEN” will scroll in the  
Allow the range to cool to room temperature before using the  
SteamClean feature. If your oven cavity is above 100°F (38°C),  
OVEN COOLING will appear in the display and the SteamClean  
feature will not activate until it cools down.  
lower text area.  
2. Press the Temp/Time “up” or “down” arrow pads to select the  
desired oven.  
“--:--” will be displayed, and “Set starting time. Push START”  
will scroll from right to left in the selected oven text area for  
2 minutes or until the Temp/Time “up” or “down” arrow pads  
are pressed again.  
Remove all racks and accessories from the oven cavity.  
For best results, use 4 oz (118 mL) of distilled or filtered water.  
The SteamClean feature will take a total of 20 minutes. A  
beep will sound at the end of the cycle.  
3. Press the Temp/Time “up” or “down” arrow pads until the  
desired time is reached.  
IMPORTANT: Because the water in the oven bottom is hot, do  
not open the oven door during the SteamClean cycle.  
Select cooking/cleaning mode” will scroll in the selected  
oven text area for 2 minutes or until a cooking cycle is  
selected.  
Press CANCEL/OFF at any time to end the cycle. The display will  
return to the time of day.  
Helpful Hints  
4. Press PRECISE/STEAM CLEAN.  
Once the SteamClean cycle is complete, remove all  
remaining water in the bottom of the oven with a sponge or  
cloth.  
REMOVE RACKS” will scroll in the selected oven text area  
for 5 seconds, followed by “SELECT OPTION.” In the other  
^
text area, PRESS (^) or ( ) KEY” will scroll from left to right.  
Wipe any remaining moisture from the oven door interior,  
oven cavity interior sides, and cooktop.  
5. Press the Temp/Time “up” or “down” arrow pads until the  
desired temperature is displayed.  
Push START” will scroll in the selected oven text area.  
Use a soft brush or nylon scrubber to wipe the oven interior.  
This may help with more stubborn stains.  
6. Press the Temp/Time “up” or “down” arrow pads to select the  
desired cleaning level. The desired clean level and “PUSH  
START” will scroll in the displays.  
It is recommended to use distilled or filtered water, as tap  
water may leave mineral deposits on the oven bottom. Use a  
cloth soaked with vinegar or lemon juice to remove any  
mineral deposits that may be left after the SteamClean cycle.  
7. Press START.  
The cleaning cycle will begin, and the name will scroll in the  
upper text area.  
If the oven is heavily soiled, use the Self-Clean cycle. The  
SteamClean cycle may be used first to eliminate most of the  
debris, resulting in a more effective self-clean.  
8. UNLOCK IN XXX” will scroll in the upper or lower text area  
(depending on oven selection). After 5 seconds, “LOCKING”  
will scroll until the door is locked.  
To SteamClean:  
1. Remove all racks and accessories from the oven cavity.  
2. Press Steam/Precise Clean.  
After the door is lock, “CLEAN UPPER” or CLEAN LOWER”  
will scroll in the selected oven text area until the clean cycle is  
finished.  
3. Add 4 oz (118 mL) of distilled or filtered water to the oven  
When the self-clean cycle ends:  
bottom.  
CLN COMPLETE will scroll in the selected oven text area. After  
5 seconds, “OVEN COOLING” will scroll in the display until the  
oven temperature falls below 500°F (260°C).  
4. Press START.  
5. After 20 minutes, a beep will sound to signal the end of the  
cycle.  
UNLOCKING” will be displayed until the oven door unlocks and  
the lock icon turns off.  
6. Press CANCEL to clear the display.  
7. Remove any excess water with a sponge or cloth and wipe  
down oven interior.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Cleaning  
IMPORTANT: Before cleaning, make sure all controls are off and  
the oven and cooktop are cool. Always follow label instructions  
into soil with a damp paper towel or soft cloth. Continue  
rubbing until white film disappears.  
on cleaning products.  
Burned-on soil  
Soap, water and a soft cloth or sponge are suggested first unless  
otherwise noted.  
Cooktop Cleaner and Cooktop Scraper:  
Clean as soon as cooktop has cooled down. Rub creme into  
soil with damp paper towel. Hold scraper as flat as possible  
on surface and scrape. Repeat for stubborn spots. Polish  
entire cooktop with creme and paper towel.  
EXTERIOR PORCELAIN ENAMEL SURFACES  
Food spills containing acids, such as vinegar and tomato, should  
be cleaned as soon as the entire range is cool. These spills may  
affect the finish.  
Metal marks from aluminum and copper  
Cooktop Cleaner:  
Cleaning Method:  
Clean as soon as cooktop has cooled down. Rub creme into  
surface with a damp paper towel or soft cloth. Continue  
rubbing until white film disappears. The marks will not totally  
disappear, but after many cleanings they will become less  
noticeable.  
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing  
pad: Gently clean around the model and serial number plate  
because scrubbing may remove numbers.  
All-Purpose Appliance Cleaner Part Number 31682 (not  
included):  
Tiny scratches and abrasions  
See Assistance or Service” section to order.  
Cooktop Cleaner:  
Clean as soon as cooktop has cooled down. Rub creme into  
surface with a damp paper towel or soft cloth. Continue  
rubbing until white film disappears. Scratches and abrasions  
do not affect cooking performance, and after many cleanings  
they will become less noticeable.  
STAINLESS STEEL (on some models)  
To avoid damage to stainless steel surfaces, do not use soap-  
filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-  
wool pads, gritty washcloths or abrasive paper towels.  
Cleaning Method:  
COOKTOP CONTROLS  
Rub in direction of grain to avoid damaging.  
To avoid damage to the cooktop controls, do not use steel wool,  
abrasive cleansers or oven cleaner.  
Stainless Steel Cleaner and Polish Part Number 31462 (not  
included): See Assistance or Service” section to order.  
To avoid damage, do not soak knobs.  
Liquid detergent or all-purpose cleaner: Rinse with clean  
water and dry with soft, lint-free cloth.  
When removing or replacing knobs, make sure knobs are in the  
Off position.  
Do not remove seals under knobs, if present.  
CERAMIC GLASS (on some models)  
Cleaning Method:  
To avoid damage to the cooktop, do not use steel wool, abrasive  
powder cleansers, chlorine bleach, rust remover or ammonia.  
Warm, soapy water: Pull knobs straight away from control  
panel to remove.  
Cleaning Method:  
Always wipe with a clean, wet cloth or sponge and dry thoroughly  
to avoid streaking and staining.  
CONTROL PANEL  
To avoid damage to the control panel, do not use abrasive  
cleaners, steel-wool pads, gritty washcloths or abrasive paper  
towels.  
Cooktop Cleaner Part Number 31464 is recommended regularly  
to help avoid scratches, pitting and abrasions and to condition  
the cooktop, and can be ordered as an accessory. See  
Assistance or Service” section to order.  
To avoid turning the controls on while cleaning, you may activate  
the Control Lock feature (on some models). See Control Lock”  
section.  
Cooktop Scraper Part Number WA906B is also recommended for  
stubborn soils, and can be ordered as an accessory. See  
Assistance or Service” section to order. The Cooktop Scraper  
uses razor blades. Store razor blades out of the reach of children.  
Cleaning Method:  
Glass cleaner and soft cloth or sponge: Apply glass cleaner  
to soft cloth or sponge, not directly on panel.  
Light to moderate soil  
Paper towels or clean damp sponge  
All-Purpose Appliance Cleaner Part Number 31682 (not  
included):  
Sugary spills (jellies, candy, syrup)  
Cooktop Scraper:  
See Assistance or Service” section to order.  
Scrape off sugary spills while the cooktop is still warm. You  
may want to wear oven mitts while cleaning the cooktop.  
OVEN DOOR EXTERIOR  
Cooktop Polishing Creme and clean damp paper towel:  
Clean as soon as cooktop has cooled down. Rub creme into  
surface with a damp paper towel or soft cloth. Continue  
rubbing until white film disappears.  
Cleaning Method:  
Glass cleaner and paper towels or nonabrasive plastic  
scrubbing pad: Apply glass cleaner to soft cloth or sponge,  
not directly on panel.  
Heavy soil, dark streaks, specks and discoloration  
All-Purpose Appliance Cleaner Part Number 31682 (not  
included):  
Cooktop Polishing Creme or nonabrasive cleanser:  
Clean as soon as cooktop has cooled down. Rub product  
See Assistance or Service” section to order.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Remove:  
1. Open oven door all the way.  
OVEN CAVITY  
2. Pull forward and down on the hinge latch on each side.  
Do not use oven cleaners.  
Food spills should be cleaned when oven cools. At high  
temperatures, foods react with porcelain and staining, etching,  
pitting or faint white spots can result.  
Cleaning Method:  
Self-Cleaning cycle: See “Self-Cleaning Cycle” first.  
OVEN RACKS  
3. Close the oven door as far as it will shut.  
4. Lift the oven door while holding both sides.  
Cleaning Method:  
Self-Cleaning cycle: See “Self-Cleaning Cycle” first. Remove  
racks, or they will discolor and become harder to slide. If this  
happens, a light coating of vegetable oil applied to the rack  
guides will help them slide.  
Continue to push the oven door closed and pull it away from  
the oven door frame.  
Steel-wool pad  
Oven Light  
The ovens light is a standard 40-watt appliance bulb.  
Before replacing, make sure the oven and cooktop are cool and  
the control knobs are off.  
To Replace:  
1. Unplug range or disconnect power.  
To Replace:  
1. Insert both hanger arms into the door.  
2. Turn the glass bulb cover in the back of the oven  
counterclockwise to remove.  
3. Turn bulb counterclockwise to remove from socket.  
4. Replace bulb, then bulb cover by turning clockwise.  
5. Plug in range or reconnect power.  
2. Open the oven door.  
You should hear a click” as the door is set into place.  
Oven Door  
IMPORTANT:  
3. Move the hinge levers back to the locked position. Check  
that the door is free to open and close. If it is not, repeat the  
removal and installation procedures.  
To avoid oven door glass breakage:  
Do not close the oven door if the racks are not fully inserted  
into the oven cavity or when bakeware extends past the front  
edge of an oven rack.  
Do not set objects on the glass surface of the oven door.  
Do not hit glass surfaces with bakeware or other objects.  
Do not wipe down glass surfaces until the oven has  
completely cooled.  
For normal range use, it is not suggested to remove the oven  
door. However, if removal is necessary, make sure the oven is off  
and cool. Then, follow these instructions. The oven door is heavy.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.  
Nothing will operate  
Oven temperature too high or too low  
Is the power supply cord unplugged?  
Plug into a grounded outlet.  
Does the oven temperature calibration need adjustment?  
See Oven Temperature Control” section.  
Has a household fuse blown, or has a circuit breaker  
tripped?  
On some models, does the cooling fan run during BAKE,  
BROIL or CLEAN?  
Replace the fuse or reset the circuit breaker. If the problem  
continues, call an electrician.  
It is normal for the fan to automatically run when the oven is  
in use. This helps cool the electronic control.  
Cooktop will not operate  
Oven indicator lights flash  
Is the control knob set correctly?  
Push in knob before turning to a setting.  
Do the oven indicator lights flash?  
See the “Display” and/or the “Oven Lights” section. If the  
indicator light(s) keeps flashing, call for service. See  
Assistance or Service” section.  
On ceramic glass models, is the oven control lockout set?  
See Control Lockout” section.  
Clock not displayed  
Excessive heat around cookware on cooktop  
Is the range in Energy Saver Mode?  
See Energy Saver” in the Settings” section.  
Is the cookware the proper size?  
Use cookware about the same size as the surface cooking  
area, element or surface burner. Cookware should not extend  
more than ½" (1.3 cm) outside the cooking area.  
No tones sound when keys are pressed  
Have the tones been deactivated?  
See Tones” in the “Settings” section.  
Hot Surface indicator light stays on  
Does the Hot Surface indicator light stay on after control  
knob(s) have been turned off?  
Display shows messages  
See Cooktop Controls” section.  
Is BAKE” or LOCK” flashing in the display?  
There has been a power failure. Clear the display. See  
Display(s)” section. On some models, reset the clock, if  
needed. See Clock” in the “Settings” section.  
Cooktop cooking results not what expected  
Is the proper cookware being used?  
See Cookware” section.  
Is the display showing a letter followed by a number?  
Depending on your model, press OFF/CANCEL, OFF or  
CANCEL/OFF to clear the display. See “Display” in the  
Electronic Oven Controls” section. If it reappears, call for  
service. See Assistance or Service” section.  
Is the control knob set to the proper heat level?  
See Cooktop Controls” section.  
Is the range level?  
Level the range. See the Installation Instructions.  
Self-Cleaning cycle will not operate  
Oven will not operate  
Is the oven door open?  
Close the oven door all the way.  
Is the electronic oven control set correctly?  
See Electronic Oven Controls” section.  
Has the function been entered?  
See Self-Cleaning Cycle” section.  
Has a delay start been set?  
See Start Time” section.  
On some models, has a delay start Self-Clean cycle been  
set?  
See Self-Cleaning Cycle” section.  
On some models, is the oven control lockout set?  
See Control Lockout” section.  
Has a delay start been set?  
See Start Time” section.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Oven cooking results not what expected  
Is the range level?  
Level the range. See the Installation Instructions.  
Is there proper air circulation around bakeware?  
See Positioning Racks and Bakeware” section.  
Is the proper temperature set?  
Double-check the recipe in a reliable cookbook.  
Is the batter evenly distributed in the pan?  
Check that batter is level in the pan.  
Is the proper oven temperature calibration set?  
See Oven Temperature Control” section.  
Is the proper length of time being used?  
Adjust cooking time.  
Was the oven preheated?  
See Baking” and “Broiling” sections.  
Has the oven door been opened while cooking?  
Oven peeking releases oven heat and can result in longer  
cooking times.  
Is the proper bakeware being used?  
See Bakeware” section.  
Are baked items too brown on the bottom?  
Move rack to higher position in the oven.  
Are the racks positioned properly?  
See Positioning Racks and Bakeware” section.  
Are pie crust edges browning early?  
Use aluminum foil to cover the edge of the crust and/or  
reduce baking temperature.  
ASSISTANCE OR SERVICE  
Before calling for assistance or service, please check  
Troubleshooting.” It may save you the cost of a service call. If  
you still need help, follow the instructions below.  
Accessories  
When calling, please know the purchase date and the complete  
model and serial number of your appliance. This information will  
help us to better respond to your request.  
Accessories U.S.A.  
To order accessories, call the Whirlpool Customer eXperience  
Center toll free at 1-866-664-2449 and follow the menu prompts.  
Or visit our website at www.whirlpool.com and click on “Parts &  
Accessories.”  
If you need replacement parts  
If you need to order replacement parts, we recommend that you  
use only FSP® replacement parts. FSP® replacement parts will fit  
right and work right because they are made with the same  
precision used to build every new WHIRLPOOL® appliance.  
Broiler Pan and Grid  
Order Part Number 4396923  
To locate FSP® replacement parts in your area, call us or your  
nearest Whirlpool designated service center.  
Stainless Steel Cleaner and Polish  
(stainless steel models)  
Order Part Number 31462  
In the U.S.A.  
All-Purpose Appliance Cleaner  
Order Part Number 31682  
Call the Whirlpool Customer eXperience Center  
toll free: 1-800-253-1301.  
Our consultants provide assistance with:  
Cooktop Cleaner  
(ceramic glass models)  
Features and specifications on our full line of appliances.  
Installation information.  
Order Part Number 31464  
Use and maintenance procedures.  
Accessory and repair parts sales.  
Cooktop Scraper  
(ceramic glass models)  
Specialized customer assistance (Spanish speaking, hearing  
impaired, limited vision, etc.).  
Order Part Number WA906B  
Referrals to local dealers, repair parts distributors and service  
companies. Whirlpool designated service technicians are  
trained to fulfill the product warranty and provide after-  
warranty service, anywhere in the United States.  
To locate the Whirlpool designated service company in your  
area, you can also look in your telephone directory Yellow  
Pages.  
For further assistance  
If you need further assistance, you can write to Whirlpool  
Corporation with any questions or concerns at:  
Whirlpool Brand Home Appliances  
Customer eXperience Center  
553 Benson Road  
Benton Harbor, MI 49022-2692  
Please include a daytime phone number in your correspondence.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WHIRLP OOL CORP ORATION MAJ OR AP P LIANCE WARRANTY  
LIMITED WARRANTY  
For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or  
furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Parts  
and repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company.  
This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in  
which it was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original purchase date  
is required to obtain service under this limited warranty.  
ITEMS EXCLUDED FROM WARRANTY  
This limited warranty does not cover:  
1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or  
repair house fuses, or to correct house wiring or plumbing.  
2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty  
coverage.  
3. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is  
contrary to published user or operator instructions and/or installation instructions.  
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in  
accordance with electrical or plumbing codes, or use of consumables or cleaning products not approved by Whirlpool.  
5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage  
results from defects in materials or workmanship and is reported to Whirlpool within 30 days from the date of purchase.  
6. Any food loss due to refrigerator or freezer product failures.  
7. Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be  
repaired in the home and only in-home service is covered by this warranty.  
8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.  
9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an  
authorized Whirlpool servicer is not available.  
10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance  
with published installation instructions.  
11. Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty  
is void if the factory applied serial number has been altered or removed from your major appliance.  
The cost of repair or replacement under these excluded circumstances shall be borne by the customer.  
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES  
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED  
HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,  
ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR  
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION  
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES  
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE  
TO PROVINCE.  
If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies.  
If you need service, first see the Troubleshooting” section of the Use & Care Guide. After checking “Troubleshooting,” you may find  
additional help by checking the “Assistance or Service” section or by calling Whirlpool. In the U.S.A., call 1-800-253-1301. In Canada,  
call 1-800-807-6777.  
9/07  
Keep this book and your sales slip together for future  
reference. You must provide proof of purchase or installation  
date for in-warranty service.  
Dealer name____________________________________________________  
Address ________________________________________________________  
Phone number __________________________________________________  
Model number __________________________________________________  
Serial number __________________________________________________  
Purchase date __________________________________________________  
Write down the following information about your major appliance  
to better help you obtain assistance or service if you ever need it.  
You will need to know your complete model number and serial  
number. You can find this information on the model and serial  
number label located on the product.  
W10291450A  
© 2010 Whirlpool Corporation.  
3/10  
Printed in U.S.A.  
All rights reserved.  
® Registered Trademark/TM Trademark of Whirlpool, U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weider Home Gym 168ST User Manual
Weider Home Gym WESY68632 User Manual
Whirlpool Clothes Dryer WGD9500TC1 User Manual
Whirlpool Oven RS610PXGN3 User Manual
Wintal DVD Player DVD DVB T Combo Player User Manual
Xantrex Technology Marine RADAR 809 0915 User Manual
Xerox Flat Panel Television VW37L User Manual
Yamaha Network Card CRW6416SX User Manual
Zanussi Dishwasher 534324 User Manual
Zanussi Freezer ZRD 185W1 User Manual