WIDESCREEN LCD TV
Model W2602 BK
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT SAFETY INSTRUCTIONS
Follow and obey all warnings and instructions marked on the LCD TV. For your safety,
please read all the safety and operating instructions before you operate the LCD TV. Keep
this user’s manual for future reference.
Overloading
Do not overload wall outlets, extension cords, or power strips. This can result in fire or
electronic shock.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them. Periodically inspect the cords and each end of the
cords for damage. The LCD TV shall be installed near a wall socket outlet and the plug on
power cord shall be readily accessible.
Ventilation
Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable
operation of the LCD TV and to protect it from overheating, these openings must not be
blocked or covered.
• Do not block the openings by placing the LCD TV on a bed, sofa, rug or other
similar surface.
• Do not place the LCD TV in a built-in installation such as a bookcase or rack unless
proper ventilation is provided and the manufacturer’s instruction have been adhered
to.
Other Notices
• Avoid exposing the LCD TV to direct sunlight or high temperatures.
• Avoid exposing the LCD TV to moisture or high humidity.
• Do not attempt repairs yourself. Your warranty does not cover repairs or attempted
repairs by anyone not authorized by Westinghouse Digital.
• If your LCD TV will not be used for a long period of time, unplug the LCD TV and
remove the batteries from the remote control.
Precautions
• Avoid touching the screen. Skin oils are difficult to remove.
• Never remove the rear cover. Your LCD TV contains high-voltage parts. You may
be seriously injured if you touch them.
• Avoid exposing your LCD TV to direct sunlight or another heat source. Orient your
LCD TV away from direct sunlight to reduce glare.
• Always handle your LCD display with care when moving it.
• Place your LCD TV in a well-ventilated area; don’t place the LCD TV in airtight
compartments. Do not place anything on your LCD TV that prevents heat
dissipation.
• Ensure that the area around the LCD TV is clean and free of moisture.
• Do not place heavy objects on the LCD TV, audio/video cables, or power cord.
• If the LCD TV emits smoke, abnormal noise, or a strange odor, immediately turn it
off and contact the Westinghouse Service Center.
• WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose
The LCD TV To Rain Or Moisture! The LCD TV shall not be exposed to dripping or
splashing and objects filled with liquids, such as vases, shall not be placed on the
TV.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Installation Safety
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable
system is grounded to prevent voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
Lightning
For added protection for the LCD TV during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the LCD TV due to lightning and power-line surges. Do not
disconnect the antenna or the power cord during a heavy storm – lightning may strike while you
are holding the cable cord, causing serious injury. Turn off your LCD TV and wait for the weather
to improve.
Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use the LCD TV near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9) Do not attempt to bypass the safety purpose of the polarized or grounding- type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. If the provided
plug does not fit into your wall outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at the ends of
the cord.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the LCD TV. When a cart is used, use caution when moving the cart to
avoid injury or damage.
13) Unplug the LCD TV during lightning storms or when it is not being used for a long
period of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
LCD TV has been damaged in any way, such as the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the LCD TV, it has been
exposed to rain or moisture, it does not operate normally, or the TV has been
dropped.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Guidelines
WARNING: This device must be operated with the original power supply, part number DPS-210 EP 2 C.
CAUTION: The power supply outlet should be located near the LCD TV and should be easily accessible.
Always use the appropriate AC cord that is certified for your specific country. Some examples are listed
below:
USA..................UL
Canada.............CSA
Germany..........VDE
Switzerland ..... SEV
Britain ............. BASE/BS
Japan ............... Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The specific power cord for this LCD TV is enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must
meet IEC-60320 requirements and should look like Figure A1 below:
Figure A1
Figure A2
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA
Labeled. For LCD TVs that are placed on a desk or table, type SVT or SJT cord sets may be used. For LCD
TVs placed directly on the floor, only SJT type cord sets may be used. The cord set must be selected
according to the current rating for the LCD TV. Please consult the table below for the selection criteria for
power cords used in the United States and Canada.
Cord Type
Size of Conductors in Cord Maximum Current Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
18 AWG
17 AWG
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
SVT
FCC Compliance Statement
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may
cause harmful interference to radio communications if not installed and used in accordance with the
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the LCD TV and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the Westinghouse Service Center or an experienced radio/TV technician for assistance.
FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. If a BNC cable used, use only a
shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by
Westinghouse Digital will void the user's authority to operate this device.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the LCD TV
•
•
MAKE SURE THE LCD TV IS TURNED OFF
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass
cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-
abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on
the LCD TV screen or case. Some chemical cleaners have been reported to damage the screen
and/or LCD TV case. Westinghouse Digital will not be liable for damage resulting from the use of
any ammonia or alcohol-based cleaners.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Package Contents
Your product package includes:
• Westinghouse LCD TV (Model No. W2602 BK)
• Remote Control (with batteries)
• Power Cord
• User’s Manual
• Warranty Card
Front View of the LCD TV
Use the buttons on the right side of the LCD TV or on the remote control to display the On
Screen Display (OSD). The OSD controls are defined in “OSD Functions” on page 13.
“IR” Receiver
Speakers
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Side View of the LCD TV
1. Menu
Turn OSD Menu ON/OFF
Increase/Decrease sound volume or
adjust a highlighted control while in the
OSD Menu.
2. Volume + / -
Channel up/down when input is TV or
highlight a control while in the OSD
Menu.
3. Channel + / -
4. Input
Select Active Video Input or choose a
selection while in the OSD MENU.
5. Power Button
Power ON/OFF
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1. S-Video Input
Connect to an external video device such as a VCR or
video game system.
2. AV1 Video Input
Connect to an external video device such as a VCR or
video game system.
3. AV1 & S-Video Audio Input (Right / Left)
Connect an external audio source to this jack; (Audio (R/L).
This connection supports either S-Video or AV input.
4. Audio Output (Right / Left)
Connect this output to an external audio receiver.
5. ANT (RF-input)
Connect the LCD TV to an antenna or cable service.
6. VGA Audio IN
Connect to the Audio out (Green) from a computer.
7. VGA
Connect to a computer or other device with a VGA output.
8. DVI Audio Input (Right / Left)
Connect an external audio to this jack.
9. DVI
Using a 20-pin DVI cable, connect to a computer or other
device with a DVI output.
10. YPbPr1 Input
Connect an external video device with component output to
these jacks.
11. YPbPr1 Audio 1 Input (Left / Right)
Connect an external audio source to this jack.
12. YPbPr2 Input
Connect an external video device with component output to
these jacks.
13. YPbPr2 Audio 2 Input (Left / Right)
Connect an external audio source to this jack.
14. AC IN (Power)
Connect the power cord from AC IN to a power source.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
1. POWER:
Switch the power On/Off
2. INPUT
Select input source
3. CHANNEL NUMBER KEYS
Select specific channels
4. SAVE CURRENT CHANNEL
Press once to save current channel. Press
again to return to saved channel (Note: This
will save the new current channel).
5. MENU/EXIT
Turn OSD Menu On/Off or quit the TV
channel scanning
6. SCALING
Select Video Display format “STANDARD”
or “FILL” or “ZOOM”
7. T / S / W / X
OSD MENU control
8. Enter
Execute a command
9. MUTE
Turn the Sound On/Off
10.INFO.
Display the source and channel information
11.PIP
Display Sub picture On/Off
12.FREEZE
Freeze main screen
13.VOL - / +
Volume Up/Down adjustment
14.CH T / S
TV Channel Up/Down adjustment
15.YPbPr
Select YPbPr1 / YPbPr2 source input
16.PC
Select VGA / DVI source input
17.TV
Select TV source input
18.S-Video
Select S-Video source input
19.AV
Select AV1 / AV2 source input
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
1. Insert Remote Control Batteries
1) Remove the battery cover.
2) Insert the batteries corresponding to the (+) and (−) marks on the battery
compartment.
3) Re-attach the battery cover.
CAUTION:
• Only use AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire
risk or lead to personal injury.
• Insert batteries according to (+) and (−) markings. Inserting the batteries incorrectly may result
in cracking or leakage, which may pose a fire risk or lead to personal injury.
• Dispose of used batteries in accordance with local laws and regulations.
• Keep batteries away from children and pets.
• When the remote control will not to be used for an extended period, remove the batteries.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT: Before beginning, make sure all devices are turned off.
2. Connect audio and video cables to a PC
VGA CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to
the LCD TV VGA IN port.
AUDIO CONNECTION: Connect a stereo mini cable from the PC’s AUDIO OUT port
to the AUDIO IN port on the LCD TV.
3. Connect AV, Component, S-Video, Antenna/Cable to Video Devices
Connect one or all of the following compatible devices into the back of the LCD TV.
VCR
(Not supplied)
(Not supplied)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect power cables
Connect the power cord to the LCD TV then to a properly grounded AC outlet.
LCD TV
5. Turn Power On
Press the Power ON button on the right side of the LCD TV, or press the Power ON
(Red) button on the remote control.
6. Select input source for the LCD TV using the OSD menu or remote
control
7. If connecting to Antenna, Cable or other RF source on TV Inputs:
See page 18 to auto scan and edit available channels.
8. If connecting to a PC (VGA/DVI):
For the best picture quality, set the timing mode of you computer to 1280 x 720 at 75Hz.
Refer to the graphic card’s user guide of you computer to set this timing mode.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Function
All the OSD function settings are controlled either by the remote control or using the
control keys on the right side of LCD TV.
To display the OSD main menu, press the Menu button on the right side of front control
keys of the LCD TV or the MENU key on the remote control. Use 3/4 arrow keys to
highlight the desired OSD sub-menu.
Main Menu
To select a sub-menu, press ▲/▼ on the right side of the LCD TV or the ▲/▼ key on
the remote control.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE PARAMETERS:
Function Name
Function
Brightness
Contrast
Saturation
Hue
Brightness adjustment
Contrast adjustment
Saturation adjustment
Hue adjustment
Color Temp
Color temperature adjustment (Color 1, Color 2, Color 3)
Sharpness adjustment
(Sharpness cannot be adjusted in PC mode)
Sharpness
Aspect Ratio
Backlight
Reset
Set display to “STANDARD” / “FILL” / “ZOOM”
Backlight adjustment
Reset video settings
14
Download from Www.Somanuals.com. All Manuals Search And Download.
PC PARAMETERS:
Function Name
Auto Adjust
Clock
Function
Automatically adjust the horizontal phase of the image
Clock adjustment
Phase
Phase adjustment
Position
Adjust the horizontal and vertical position of the image
NOTE: The GRAPHIC menu is only available when VGA source is selected.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO SETTINGS:
Function Name
Volume
Function
Volume adjustment
Bass adjustment
Treble adjustment
Balance adjustment
MTS Selection
Bass
Treble
Balance
MTS
NOTE: This function depends on the type of broadcast being
received.
Mute
Select Audio OFF or ON
Select internal or external speaker
Reset audio settings
Speaker
Reset
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE-IN-PICTURE:
Function Name
Function
Display Mode
Main Source
OFF --> PIP --> PBP --> POP
Select main screen sources
TV --> AV1 --> AV2 --> S Video -->YPbPr1 --> YPbPr2 --> VGA -->
DVI
PIP Source
Select sub screen sources
Please see PIP/PBP/POP specification in Table 1
Swap
Swap main screen and sub-screen source
PIP Position
Sub-screen display horizontal/vertical position adjustment
Sub-screen display size adjustment
(Small -->Medium --> Large)
PIP Size
Audio From
Select main screen or sub-screen audio sources
Table 1:
SUB
VGA
DVI
AV1
AV2
S Video
YPbPr1
YPbPr2
TV
Main
VGA
DVI
X
O
O
O
O
X
O
X
O
O
X
X
X
O
O
X
O
O
X
X
X
O
O
X
O
O
X
X
X
O
O
X
X
O
O
O
O
X
X
O
O
O
O
X
O
O
X
X
X
O
O
X
AV1
AV2
O
O
O
O
O
O
S Video
YPbPr1
YPbPr2
TV
X
X
X
O
O
O
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTINGS:
Function Name
Function
Select TV Source Type (ANTENNA => Cable STD => Cable
HRC => Cable IRC)
TV / CATV
Auto Scan
Automatically detect available TV channels
Channel EDIT
Add / Delete the selected TV channel
Turn the Close Caption OFF or CC1, CC2, CC3, CC4,
TEXT1, TEXT2, TEXT3, TEXT4
Close Caption
PARENTAL CONTROLS:
Function Name
Function
Lock Menu
Turn parental control OFF or ON
MPAA Rating
TV PG Rating
Password EDIT
See page 20
See page 20
Change Password (see page 20)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Name
Function
NONE: Not available
G: General audience
PG: Parental guidance suggested
PG-13: Parents strongly cautioned
R: Restricted
MPAA Rating
NC 17: No one 17 and under admitted
X: Adult audience only
TV PG Rating
TV Y: All children
TV Y7: For older children
TV G: General audience
TV PG: Parental guidance suggested
TV 14: Parents strongly cautioned
TV MA: Mature audience only
Password Edit
Change Password
19
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTINGS:
Function Name
Function
Menu Position
Menu Timeout
Language
OSD horizontal/vertical position adjustment
Set the time to turn off the OSD automatically
OSD language selection
Sleep Timer
Transparency
DPMS
Set sleep timer to turn off the power automatically
Set OSD transparency level
Select DPMS On/Off
System Info
Factory Reset
Display Input source, type and signal
Restore factory default settings
20
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD TV Specifications
Model Name
W2602 BK
TFT (Thin Film Transistor), Active Matrix WXGA LCD, 1280 x 720 vertical
stripe
Panel
Type
Color
Anti-reflective coating + Anti-glare coating
170° (H) / 170° (V)
Viewing Angles
Input Signal
Video/Audio
VGA Analog * 1 (75 ohms, 0.7 Vp-p)/Mini-Stereo *1
H/V separated (TTL) for PC
DVI-D * 1 (HDCP support) / RCA (L/R) * 1
fh: 30-80 kHz, fv: 50-75 Hz
TV system antenna / NTSC*1
Component Video * 2 / RCA (L/R) Stereo * 2
Composite * 1 / S–Video * 1 / RCA (L/R) stereo * 1
RCA (L/R) Stereo * 1
Output Signal
HDTV Compatibility
PC Compatible
480i, 480P, 720P, 1080i
Recommended 1280 x 720 @ 75Hz
Supported
1280 x 1024 @ 60, 75Hz
1280 x 768 @ 60 Hz
800 x 600 @ 60, 75Hz
720 x 400 @ 70 Hz
1024 x 768 @ 60, 75 Hz
832 x 624 @ 75Hz
640 x 480 @ 60, 75Hz
Speaker Output
Power
9w ( x 2 Channels)
Voltage
90-240 VAC, 50/60 Hz (auto switch), 1.6A, universal.
0 to + 35° C (Hum.<90%)
Temperature (Note A) Operating
Storage
-20 to +60 oC (Hum.< 35 %)
Operating
20 to 90% non-condensing.(Ta< 35%)
Humidity (Relative).
(Note A)
Storage
10 to 90% non-condensing. (Note A)
Wet-bulb temperature should be 39 oC Max. (Ta> 40oC)
Note A: The temperature and relative humidity range is
shown in right side
Altitude
Operating
0 to 3,000 m
Storage
0 to 12,000m
Dimensions
Weight
Physical
Net / Gross
676.84mm (W) x 556.76mm (H) x 186.2mm (D)
13.0kg / 16.0kg
UL/C-UL, FCC-B
<150w
Regulations
Power saving
Modes
On
Active Off
<3w
Preset Timing Mode (Pre-adjusted to reduce blanking: 1280 x 720 at 75Hz)
Note: Product Specifications are subject to change without notice.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No Power
• Make sure power button is ON.
• Make sure AC power cord is securely connected to the AC socket.
• Plug another electrical device (such as a radio) to the power outlet to verify that the
outlet is supplying the proper voltage.
Parental Control Password is Forgotten
• In the unlikely occurrence, select “PASSWORD EDIT” and enter “0000” to reset the
password.
AUDIO Interconnection Issues
• Remember that S-Video and Composite (AV1) share the same audio source.
Power is ON but No Screen Image
• Make sure the video cable connected to the LCD TV is tightly secured to the video
output port on the back of the computer. If the other end of the video cable is not
attached properly to the LCD TV, secure it tightly.
• Adjust brightness and contrast.
• If you are using a Macintosh computer older than G3, you need a Macintosh
adapter.
• Check Source settings.
Wrong or Abnormal Colors
• If any colors (red, green, or blue) are missing, check the video cable to make sure it
is connected securely. Loose or broken pins in the cable connector could cause an
improper connection.
• Connect the LCD TV to another computer.
Snow Appears on Screen
• Check your antenna connection.
• Check the TV / CATV selection.
No Sound
• Check the audio connection.
• Press MUTE on the remote control, so that MUTE disappears from the screen.
• Check the audio settings. The LCD TV audio may be set to SAP or minimum.
• Press the Volume + (Up) key on the remote control.
• Make sure that headphones are not connected to the Headphone Jack on the LCD
TV.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Does Not Work
• Make sure batteries are inserted correctly.
• Replace batteries with new ones if necessary.
Remote Control Code Not Found in a “Universal” Remote
• Purchase a separate “learning” remote control.
Image Quality Issues
• For the best TV image quality, “Standard Definition” TV should be viewed in 4:3
format.
How Can I Find More Help?
• Contact Westinghouse Customer Service at (866) 287-5555 or write us at
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SE-UM-2601-0501
Santa Fe Springs, CA
Download from Www.Somanuals.com. All Manuals Search And Download.
|