32” CLASS LCD HDTV
E321ME – QUICK START GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE REMOTE
Power/Standby: Turn the TV on or off.
Input: Change the input device.
A/V Controls: Control external device (CEC-enabled devices only).
Info: Display the Info Window.
CC: Open the Closed Captioning menu.
Menu: Display the on-screen menu.
Input
CC
Power/Standby
A/V Controls
Info
Exit: Close the on-screen menu.
Arrow: Navigate the on-screen menu and episode guide.
Exit
OK
Menu
Arrow
OK: Select highlighted menu option.
Guide: Display the episode guide (digital channels only).
Back: Go to the previous on-screen menu options.
V Button: Launch the USB photo viewer.
Back
Guide
V Button
Channel Up/Down: Change the channel. With each press of the button,
the channel will increase or decrease by one.
Volume
Channel
Up/Down
Up/Down
Volume Up/Down: Increase or decrease the loudness of the TV’s audio.
Mute: Turn the sound off or on. When mute is activated, the
Mute
Last
TV’s audio is turned off.
Last: Return to the channel last viewed.
Number Pad
Number Pad: Use the number pad to manually enter a channel.
Wide
Dash (-)
Dash (-): Use with number pad to manually enter a digital
sub-channel. (For example, 18-4 or 18-5.)
Wide: Switch between display modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE BASE
1
2
Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft
surface, such as carpet, rug, or blanket.
Align the tabs on the base with the slots on the stand neck.
Gently push the base onto the stand neck.
If the base is not joining with the stand neck, you may have it
facing backwards.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Turn the attached thumbscrew until it is completely tightened.
Move the TV with attached stand into an upright position and
place on a flat, level, and stable surface.
Fold down the thumbscrew tab so it is flat against the bottom of
the base.
Download from Www.Somanuals.com. All Manuals Search And Download.
FIRST-TIME SETUP
1
2
Remove the battery cover by pressing gently and sliding away
from the remote.
Connect the power cord to the back of the TV.
Plug the power cord into an electrical outlet.
Insert the batteries. The + and - symbols on the batteries
must correspond to the + and - symbols inside the battery
compartment.
Replace the battery cover by gently sliding it back into place.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
If you have an external antenna or a cable connection that
Turn the TV on by pressing the Power/Standby button on the
extends from a wall outlet, connect it to the TV with an
RF/Coaxial cable.
remote or on the side of the TV.
The Setup App is displayed.
If the cable does not fit, use the included RF adapter.
Press Right Arrow to go to the next screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Press the Up/Down Arrow buttons on the remote to highlight
Press the Up/Down Arrow buttons on the remote to highlight
your preferred language.
Home Mode.
Press Right Arrow to go to the next screen.
Press Right Arrow to go to the next screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
If the TV is connected to an external antenna, select Antenna, then press
Press the Up/Down Arrow buttons on the remote to highlight
Right Arrow and go to step 7.
Scan.
If the TV is connected to a cable service without a set-top box (cable is
connected directly from the wall outlet) select Cable, then press Right Arrow
and go to step 7.
Press Right Arrow to begin the channel scan.
Wait for the channel scan to finish.
If the TV is connected to a cable or satellite set-top box, press the EXIT button
on the remote, then select the input to which your set-top box is connected
(HDMI, COMP, or AV).
When the channel scan is complete, the first-time setup is
complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
HDMI
Component
Composite AV
VIZIO High Speed HDMI Cables are manufactured to produce
the best picture on VIZIO TVs and feature:
• 1080p and for full HD video and future Ultra-HD video
• Great flexibility for thin wall mounts
• Stays securely connected at sharp angles
• Limited lifetime warranty
Ensure your device has one of the above ports.
Turn your device and the TV off.
Connect your devices using the connection chart on the next
page. This chart shows the most common connections. If you
would like to see additional connection options, see Connecting
Your Devices in the user manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Blu-ray/DVD Player, Game Console,
or other Device
Back of TV
HDMI
CHOOSE ONE:
High Speed HDMI Cable*
HDMI
Y
Best Picture
OR
Y
Component Video Cable*
CB/PB
CR/PR
CB/PB
CR/PR
Better Picture
Good Picture
Audio Cable*
L
L
R
R
OR
L
L
Composite AV Cable*
R
R
VIDEO
VIDEO
*Not Included
Download from Www.Somanuals.com. All Manuals Search And Download.
VIZIO RECOMMENDS
Add home theater surround sound without the excess clutter of wires! The VIZIO 5.1 Surround Sound Home Theater with Wireless
Subwoofer delivers big home theater sound in a sleek design that’s perfect for your TV:
• Universal 5.1 soundbar with rear satellite speakers and wireless subwoofer turns any TV into a home theater
• Wireless subwoofer uses Wireless HD Audio™ 2.4 GHz, so you can place it anywhere in the room
• Premium sound with Dolby Digital®, DTS, SRS CircleCinema HD™ and SRS TruVolume™.
Download from Www.Somanuals.com. All Manuals Search And Download.
Complete your home theater experience! The VIZIO Blu-ray Player with Wireless Internet Apps delivers full 1080p HD video, 7.1
surround sound and has built-in 802.11n dual-band wireless for easy access to movies, TV shows, music and more from the Internet.
• Exceptional Full HD 1080p performance
• Streams movies, music, and more with VIZIO Wireless Internet Apps
• Built-in Wi-Fi 802.11n
Download from Www.Somanuals.com. All Manuals Search And Download.
HELP TOPICS
Products are often returned due to a technical problem rather than a defective product that may
result in unnecessary shipping charges billed to you. Our trained support personnel can often
resolve the problem over the phone. For more information on warranty service or repair, after the
warranty period, please contact our Support Department at the number below.
Phone(877) 698-4946
Fax(949) 585-9563
Customer support and quality service are integral parts ofVIZIO’s commitment to service excellence.
For technical assistance contact our VIZIO Technical Support Department via email or phone.
Hours of operation:
Monday - Friday: 6 am to 9 pm (PST)
Saturday - Sunday: 8 am to 4pm (PST)
Please have your VIZIO model number, serial number, and date of purchase available before your
call.
• Ensure the power cord is securely connected to the AC socket on the TV and a working electrical outlet.
• Press the Power/Standby button on the remote or on the right side of the TV.
• Try plugging the power cord into a different electrical outlet.
There is no power.
• Press the Volume Up button on the remote or on the right side of the TV.
• Press the MUTE button on the remote to ensure Mute is off.
• Press MENU, then select TV Settings > Audio. Ensure TV Speakers is set to On.
There is a picture,
but there is no sound.
• View high-definition (HD) programs when possible.
The picture quality
seems low.
• Ensure all cables are securely connected.
• If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the room or close to a window for the best signal.
Download from Www.Somanuals.com. All Manuals Search And Download.
I cannot return to
the Setup App.
• The on-screen menu has guided setup. Press MENU, then select Help > System Reset >
Start Setup Wizard. Enter your PIN (default is 0000). Select Yes.
• Set the TV to Wide or Zoom Mode. Press MENU, then select Wide. Highlight Wide or Zoom and press OK.
• Adjust the video settings of your external device (Blu-ray™ or DVD player).
• If using the RGB (computer) input, ensure you are using a supported desktop resolution.
• Some television channels add black bars to the picture.
There are black/gray
bars on the top/bottom/
sides of the picture.
The TV does not respond
when I press buttons
on the remote control.
• Insert new batteries into the remote.
• Point the remote directly at the TV’s sensor.
• Ensure nothing is blocking the TV’s sensor. (The sensor is on the front of the TV, in the lower right corner.)
• Ensure your connected devices are turned on.
The TV displays “No Signal”
• Press the INPUT button on the remote and select the input to which your device
is connected (HDMI, Composite, etc).
• Adust the Color and Tint settings in the Picture menu. See Adjusting the Picture Settings in the user manual.
• Reset the picture settings. See Resetting the Picture Settings in the user manual.
• Check all cables to ensure they are securely attached.
The colors on the TV
don’t look right.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2011. ALL RIGHTS RESERVED. THE V, VIZIO, VIZIO INTERNET APPS, THEATER 3D, FULL ARRAY TRULED, EDGE LIT RAZOR LED, 240HZ SPS, 480HZ SPS,
ENTERTAINMENT FREEDOM AND ENTERTAINMENT FREEDOM FOR ALL NAMES, LOGOS AND PHRASE ARE REGISTERED OR UNREGISTERED TRADEMARKS OF
VIZIO, INC. OTHER LOGOS AND TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. SUBJECT TO CHANGE WITHOUT NOTICE.
Download from Www.Somanuals.com. All Manuals Search And Download.
110323ST-NC
|