SCHÖNBERG SERIES
OWNER´S MANUAL
Now, as always, speakers form the most important link in a stereo and home theater
system. There-fore, they should be positioned and connected with care. It is our hope
that the information contained within this manual will help you in setting up your new
speakers so that they may provide you with many years of listening pleasure.
Your Vienna Acoustics Team
ATTENTION:
Please read these instructions carefully and com-pletely, since they are very important
to ensure the best performance and the long-term problem-free operation.
Make sure you have received with BERG or WEBERN your choice of the wall-mounting
bracket or stand for free-standing positioning, which are both packed separately. A
spike stand for free-standing positioning is included with SCHÖNBERG.
ROOM TREATMENT
Good sounding rooms have a well-balanced acoustic. This does not mean that your
home needs to look like a recording studio.
Commonly found furnishings such as bookshelves, carpeting and furniture all exhibit
beneficial amounts of absorption and dispersion. Rooms with little furniture, carpeting
or other surfaces will demonstrate poor damping and will produce a hard, bright
sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Stand alone application:
Alternatively, for those who do not wish to mount the speaker to the wall, an ultra-
rigid aluminium stand is offered, which was developed for optimum sound when place
on a surface such as a bookshelf or desktop. The bottom of the stand is coated with a
layer of isolation material designed to both protect the surface on which the speaker is
placed and to provide a superior interface between speaker and mounting surface for
improved performance. The stand serves both tweeter left and tweeter right positions.
267
101
267
558
525
141
0 -12,5 -25
558
0 -12,5 -25
267
101
267
101
267
210
210
141
0 -12,5 -25
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUNTING WEBERN & BERG
A. On wall application:
To prepare the speakers for wall mounting:
1. Please put on the enclosed gloves to avoid fingerprints.
2. Remove the aluminium inlays on the top and bottom of the speakers. As they are
attached with magnets, they simply lift off.
3. Put the matching wall-mounting inlay on each speaker, so that the two holes for the
two bolt sockets line up.
ATTENTION:
The two inlays are slightly different for use on each of the respective sides. In order to
mount the inlays correctly the three conical milled points must be visible and the
mounting bolts are able to be inserted.
4. Now attach the appropriate inlay with the two bolts, by using the hexagon-tool
(Allen wrench/ key).
5. Now turn the speaker over and execute the same procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
To attach the wall-mounting device to the wall:
ATTENTION:
For best performance, it is recommended that the speakers be angled toward the
listening position. This means that special attention must be paid when mounting the
brackets.
If you have chosen to mount a pair of speakers with the tweeters on the inside, mount
the bracket with the thin flat profile to the inside. If mounting a pair of speakers with
the tweeters on the outside, mount the bracket with the thin flat profile to the outside.
If you have chosen to use a speaker as a center channel, two position options are
allowed, either angled up or down. To angle up, the thin flat profile of the bracket
should face up. To angle down, the thin flat profile of the bracket should face down.
1. First mark the position on the wall using the holes of the wall-mounting bracket as a
guide.
2. After drilling the holes, put the included anchors (metal for sheetrock or other wall
board, or plastic for plaster or concrete wall construction material) into the wall.
3. Now fix the wall-mounting bracket to the wall, by using the provided screws.
Download from Www.Somanuals.com. All Manuals Search And Download.
To attach the speaker to the wall-mounting device:
ATTENTION:
As both WEBERN or BERG are symmetrical in driver orientation (having not top or
bottom) selecting an orientation position for the speakers so that the tweeters face in
or out, as well as up or down, can be done to suit the nature of each installation. It is
recommended that experimentation take place to determine which orientation of the
tweeters results in optimal performance.
1. Please put on the enclosed gloves to avoid fingerprints.
2. Insert the lower conical tipped bolt inside the wall-mounting bracket completely
with the hexa-gonal tool (Allen wrench/key). [For center posi-tioning simply start with
whichever side is most convenient.]
ATTENTION:
The accessories box includes two plastic sockets, which you can put on the conical
point of the bolts to avoid scratching the inlays. Once the preferred position is found,
they can be removed.
3. After you have chosen a position, place the speaker in away that the lower bolt fits
into the chosen conically milled point on the cabinet inlay.
4. Press the speaker against the rubber-pad and attach the speaker to the bracket
by tightening completely the upper conical tipped bolt with the hexagonal tool (Allen
wrench/ key). Please make sure that you use the same conically milled point on both,
lower and upper, inlays.
ATTENTION:
For safety reasons it is recommended that all connection bolts be tightened every six
months.
B. Free-standing application:
Connecting the speakers to the aluminium stands (please see drawing):
ATTENTION:
Usually, you want the tweeters to look in two different directions. In this case, you
have to act as follows:
1. Please put on the enclosed gloves to avoid fingerprints.
2. Put your pair of speakers in front of you in a way that the tweeters are to the inside.
3. Pull out the inlay of each speaker. Since they are attached with magnets, they
simply pull off.
4. Put the spacer bars on the two speakers, so that the holes (two in each bar and two
in each speaker) for the two bolts match.
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Put the attached bases on the spacer bars, so that now all holes (two in each
speaker, two in each spacer bar and two in each base) match.
ATTENTION:
The Vienna Acoustics logo on the base faces the front.
6. Now attach the stand by completely tightening the two supplied bolts using the
hexagonal tool (Allen wrench/key).
ACCESSORIES FOR WEBERN & BERG FREE STANDING BRACKET:
BRACKET: 1 pc.
SPACER BAR: 1 pc., for connection between the speaker and the bracket.
BOLTS: 2 pcs. M6 x 45 mm
HEXAGONAL TOOL (Allen wrench/key): 1 pc.
for adjusting the bolts.
BANANA PLUGS: 2 pcs., silver plated, short version for convenient connection of
speaker cables.
GLOVES: 2 pcs.
for protecting the speaker against fingerprints.
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES FOR WEBERN & BERG WALL MOUNTING BRACKET:
WALL MOUNTING DEVICE: 1 pc.
for on-wall application.
WALL-MOUNTING INLAY: 2 pcs., to place on the speaker for attaching wall-mounting
bracket.
BOLT: 2 pcs.
for connecting the cabinet with the wall mounting bracket.
PLASTIC SOCKETS: 2 pcs.
to avoid scratches when inserting and adjusting bolts.
BOLTS: 4 pcs. M6 x 20 mm
for attaching the inlays to the cabinet.
HEXAGONAL TOOL (Allen wrench/key): 2 pcs.
for adjusting the screws and bolts.
METAL WALL MOUNTING ANCHORS AND SCREWS (for mounting in sheetrock or other
wall board wall construction material): 2 pcs.
PLASTIC WALL MOUNTING ANCHORS AND SCREWS (for mounting in plaster or
concrete wall construction material): 2 pcs.
LOGO: 1 pc.
for placing on the grill or speaker, depending on the orientation of the speaker in each
application.
BANANA PLUGS: 2 pcs.
silver plated, short version for convenient connec-tion of speaker cables.
GLOVES: 2 pcs.
for protecting the speaker against fingerprints.
CABINETS
To ensure the best possible appearance, the surface of the aluminium line is treated
with the highest grade of aluminium processing.
After being precisely machined and CNC milled, all aluminium parts are bead blasted
and transparently anodized.
To maximize internal volume, we profited from the stiffness of aluminium to realize a
slim walled cabinet. Furthermore, the aluminium panels are curved to optimize both
stiffness and freedom from resonance, which is so crucial for natural sound. This curve
means that while the average depth of the speaker is 50 mm (2 inches), it reaches a
maximum point of 84 mm (3.3 inches) in the center of the arch.
Download from Www.Somanuals.com. All Manuals Search And Download.
The extra available space in the middle of the cabinet allows for the use of physically
deeper pure
high-end mid-bass drivers. An additional benefit of the speakers´ shape is the lack
of parallel walls,
which avoids internal standing waves from adver-sely affecting performance.
In extensive research we found out that it is vital not to use a single enclosed form in
creating the box, but to break the cabinet into two separate elements connected by
MDF, with additional dam-ping strips between the MDF and the aluminium, in
order to completely eliminate deleterious cabinet resonance.
CONNECTIONS
All connections must be complete and secure, since poor contact between speaker
cable and input connector can lead to degradation of sound quality.
The speakers come with a set of two silver plated banana plugs in which the speaker
wire is inserted and held in place by screwing down the insert post.
For the aluminium line we use silver plated banana connectors that do not oxidize, but
contaminants or surface oxidation build-up on your speaker cables and connectors
may degrade sound quality.
It is also a good idea to make a point of regularly cleaning all connections in your
system since oxi-dation will build up on a regular basis that can lead to signal
degradation.
ATTENTION:
Please pay special attention when handling the cables during hookup of the
loudspeaker. It is recommended that the amplifier be turned off while connection to
the speaker is made secure, with no stray wires contacting the cabinet.
As with any metal, the aluminium that makes up much of the cabinet is a conductive
material. Therefore, a short circuit could result if any bare wire or connector should
come in contact with the cabinet.
CABLING
We encourage and recommend the use of high quality speaker cables and believe
them to be an important tool for the enthusiast in obtaining maximum enjoyment
from their music reproduction system. High quality cabling is a significant tool in the
fine-tuning of any audio system.
As with any purchase, listen carefully and allow your ears to guide you. It is beyond
the scope of this manual to provide a useful compendium concerning cables, or to
make specific brand or model recommendations. A number of high quality magazines
do in fact list cable recommendations.
Download from Www.Somanuals.com. All Manuals Search And Download.
AMPLIFICATION
Our speakers demonstrate outstanding sonic results with a variety of amplifier types.
They feature a cominaction of high efficiency and gentle impedance curves that allow
them to be used with either solid state or tube electronics.
However, it is still important to select an amplifier with care since the full potential of
your system will only be revealed by quality electronics. Amplifier designs do have
distinct and different sounds.
It is important to listen carefully to the match of amplifier and loudspeaker to ensure
that the com-bination works well sonically for you.
Though rated amplifier wattage bears little correla-tion to either sound quality or
drive capability, the user is cautioned that amplifiers of lower power ratings, more
frequently than more powerful ampli-fiers, are particularly prone to producing
danger-
ously significant amounts of distortion as they are stressed beyond their limits.
This distortion can and will damage loudspeaker components. This damage will not be
covered under warranty.
BREAKING IN NEW LOUDSPEAKERS
Your loudspeakers contain a large number of pre-cision built moving parts. These parts
require play-ing time initially to develop their maximum smooth-ness and extension.
Very audible improvements can be observed during about 30 hours of playing.
Additional improvements will be evident after 100 hours of playing time, at which
point the speakers will have reached their full musical potential.
MAINTENANCE
Your speaker cabinets can be cleaned periodically with a soft, damp cloth. Do not use
any chemical detergents. Should spots or stains appear, clear water can be used to
gently remove them.
Should the bass drivers become dusty, it is safe to use a soft brush to clean the
woofers.
Happy Listening!
Your Vienna Acoustics Team
Download from Www.Somanuals.com. All Manuals Search And Download.
|