Installation Guide & Hardware Manual
for Cintiq 21UX (DTZ-2100D)
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION AND OVERVIEW
The Wacom® Cintiq® 21UX pen display combines the benefits of a Liquid Crystal Display (LCD) with the
control, comfort, and productivity of Wacom’s cordless, battery-free pen technology. This gives you a
direct pen-on-screen interface for your computer.
Cintiq’s basic components include a Wacom pen tablet internally mounted behind a 21.3" diagonal TFT
color display, and Wacom’s Grip Pen.
Cintiq comes with a modular display stand, which allows you to easily rotate the pen display to any
orientation, and to adjust the incline of the working surface to any angle between 10 and 65 degrees.
Please refer to Working with your Cintiq on page 24 for more information.
This manual describes how to install the Cintiq hardware and software. It also describes how to use
Cintiq, the Grip Pen, and the modular display stand.
See Unpacking your Cintiq on page 8 before setting up the Cintiq stand or unpacking the Cintiq pen
display. Please follow all instructions carefully.
The computer treats the Cintiq pen display as two separate devices (the display and the pen
tablet). Therefore, the installation process is completed in two stages:
•
•
First install the Cintiq as a display.
Then install the Cintiq as a pen tablet.
Both stages require hardware and software installations and adjustments. Please follow all
instructions carefully.
IMPORTANT:You MUST install the Wacom pen tablet driver software for correct pen-on-screen
functionality.
To learn about using the Wacom Tablet control panel to customize your pen display tablet and pen
settings on Windows or Macintosh computers, see Customizing on page 32.
To use the pressure sensitivity of the Grip Pen with your favorite drawing application, see the
instructions in that application’s manuals.
The following kinds of information are not included with this product: information about your specific
computer hardware or operating system, or information about your application software. Your best
source for this information is the set of manuals and discs that came with your hardware, operating
system, or application.
Wacom’s philosophy is to continually improve all of its products. As a result, engineering changes and
improvements are made from time to time. Therefore, some changes, modifications, and improvements
may not be covered in this manual.
Introduction and overview
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS ON USE AND HANDLING
To ensure the safe usage of your product, be sure to follow all instructions, cautions, and warnings
found within this manual. Failure to do so could cause the loss of data or damage to your computer.
Failure to do so could also void your warranty, in which case Wacom shall have no responsibility to
repair or replace the product.
This symbol indicates an item that, if disregarded, may lead
to loss of human life or serious injury.
WARNING
This symbol indicates an item that, if disregarded, may lead
to human injury or damage to personal property.
CAUTION
Exercise due care and diligence whenever engaging in a described action.
PHYSICAL LOCATION
Do not use the Cintiq pen display in a facility control system that requires extremely
high reliability; it may cause other electronic devices to malfunction, or other devices may
cause the pen display tablet to malfunction. Where use is prohibited, power off Cintiq to
prevent the possibility of it causing other electronic devices to malfunction. Wacom does not
accept any liability for direct or consequential damages. For details, please refer to your
Warranty located at the end of this manual.
WARNING
ENVIRONMENT
Temperature and Humidity
•
•
Operating temperature and humidity: 5˚ to 35˚C, 20 to 80% RH
Storage temperature and humidity: -10˚ to 60˚C, 20 to 90% RH
Do not use or store Cintiq where:
CAUTION
CAUTION
•
Temperature changes are severe or exceed specifications (e.g., outdoors or inside
a vehicle).
•
The pen display, the Grip Pen, and the Cintiq stand are exposed to direct sunlight or heat
from an appliance, or are exposed to water or any other kind of liquid.
Do not use Cintiq in a dusty environment; this may damage the unit.
Precautions on use and handling
Page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
USAGE
Only use the power adapter that came with Cintiq. If a different type of power adapter is
used, Cintiq will not work properly or may be damaged. Using a different type of power
adapter also has the potential to result in fire. Use of a different power adapter will void
your warranty.
WARNING
Be sure to use a grounded power source when applying power to Cintiq.
CAUTION
CAUTION
Do not connect or disconnect the video or power cables while Cintiq or your computer
are turned on; this may damage the display or computer video card. In this case, Wacom
shall have no responsibility to repair or replace the product.
This product is for use with a DVI or VGA video card; using an inappropriate video card
CAUTION
CAUTION
may damage Cintiq.
Do not block the rear panel ventilation holes; this may overheat and damage the unit.
When not using Cintiq for long periods of time, unplug the power adapter from the AC
outlet.
HANDLING
High Voltage. Do not open or disassemble the Cintiq pen display. There is a risk of
electrical shock when the casing is open. This will also void your warranty and Wacom
shall have no responsibility to repair or replace the product.
WARNING
Do not operate the display stand incline adjustment levers when Cintiq is not mounted
on the stand, and do not lift the stand by the adjustment levers; the stand is spring-
loaded and may cause injury or damage if released without the weight of Cintiq on the stand.
Improper operation may lead to physical injury or damage to the stand.
WARNING
WARNING
When moving Cintiq to a different location, either remove the display unit from the
stand (see page 13 for details) and then move both items separately, use the lock
screws to fix Cintiq to the stand (see page 56 for details), or hold onto both Cintiq and
the stand to make sure that the stand does not separate from the display unit when
moving them together.
Before moving Cintiq, first adjust the stand to its full upright position; this will reduce the
spring tension so that the stand will not accidentally release and snap shut. If the display unit
is in landscape orientation, use one hand to grasp the bottom of the display and with your
other hand grasp the back of the stand. Be sure to lift on both the display and the stand so
that the stand will not separate from the display when moving Cintiq.
If Cintiq is in portrait orientation or has been locked to the stand with the rotation lock screws
(see page 56), the stand will not separate from the display unit and Cintiq can be safely lifted
by grasping the display unit with both hands.
Always follow the instructions on page 13 to remove the display unit from the stand.
If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking
from it; this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse
immediately with running water for at least 15 minutes or more. If contact is made with the
eyes or mouth, also consult a physician.
WARNING
Precautions on use and handling
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Hg
– LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL
LAWS.
The Cintiq pen display has a backlight which contains mercury (Hg).
Be sure to dispose of properly, and to manage any disposal of this unit in accordance with
your local ordinances and laws.
Do not disassemble the Cintiq stand. Improper disassembly could result in physical injury
or damage to the stand. In this case, Wacom shall have no responsibility to repair or replace
the product.
WARNING
Prevent children from swallowing the pen tip or side switch. The pen tip or side switch
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
may accidentally be pulled out if children are biting on them.
Do not disassemble the Grip Pen. This may cause the device to malfunction. In this case,
Wacom shall have no responsibility to repair or replace the product.
Do not scratch the display screen. Avoid placing sharp objects on the display screen
surface.
Avoid intensive shock or vibration to Cintiq, the Cintiq stand, or the Grip Pen. Hitting or
dropping Cintiq may damage the display screen or other components.
Do not put heavy articles on the pen display or push against it with a strong force; this
may damage the display screen or break the Cintiq stand locking mechanism.
Do not place heavy articles on the Cintiq cabling, repeatedly bend the cables sharply,
or apply heavy stress to the cable connectors; this may damage the unit or cabling.
Do not store the pen display tablet on a surface that would excessively bend or crimp
the cable.
If the pen tip becomes sharp or angular, it may damage the coating on the display
screen. Please replace the pen tip if necessary.
Do not use any organic solvent (e.g., alcohol) or even mild detergent to clean
the display screen. Use of these cleaners can damage the coating on the screen.
Please note that damage of this kind is not covered by the manufacturer's warranty.
•
To clean the display screen, use an anti-static cloth or a slightly damp cloth.
When cleaning, apply only a light amount of pressure to the display screen and do not
make the surface wet.
•
•
To clean the Cintiq casing, Cintiq stand, or Grip Pen, use a soft cloth with mild detergent
(such as dish washing liquid) diluted with water.
Before cleaning, always disconnect your product from the AC power source.
Do not expose Cintiq to high voltage electrostatic discharges or to a build-up of an
electrostatic charge on the LCD screen. This may result in a temporary discoloration and
blotching of the display. If discolorations occur, leave the display on and the discolorations
should disappear within a few hours.
CAUTION
Precautions on use and handling
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Reuse, recycling and recovery. You are urged to recycle this product when replacing it with
a newer product or when it has outlived its useful life by bringing it to an appropriate collection
point for recyclable materials in your community or region. By doing this, you can help
improve the environment of your community as well as minimize the potential negative effects
created, should any hazardous substance that may possibly be present within waste material
reach the environment during the disposal process.
Within the European Union, users are required not to dispose of Waste Electrical and
Electronic Equipment (WEEE) as unsorted municipal waste, according to the Directive
2002/96/EC of the European Parliament and of the Council of 27 January 2003, or the
corresponding local laws of the Member States. Products for which this is applicable will be
marked with the WEEE symbol shown at the beginning of this note unless this is not feasible
because of the size or the function of the product. Wacom products are subject to the
Directive 2002/96/EC and therefore you should always collect them separately and bring
them to the appropriate collection point in your community or region.
Wacom pen display products (Cintiq series) comply with the European Union RoHS Directive
2002/95/EC (RoHS Directive).
Precautions on use and handling
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction and overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Precautions on use and handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Physical location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Unpacking your Cintiq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting up the Cintiq stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Unpacking and mounting the Cintiq pen display . . . . . . . . . . . . . . . . . . . . 10
Adjusting the display incline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adjusting rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the pen holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Removing Cintiq from the display stand . . . . . . . . . . . . . . . . . . . . . . . 13
Cintiq pen display components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Step 1: display installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Display cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Step 2: pen tablet installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
USB cable installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Pen tablet USB cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Software installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Working with your Cintiq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using the Grip pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Pen components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Basic pen operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Tablet controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using ExpressKeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using the Touch Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Setting up your work area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Customizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Opening the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Learning more about Cintiq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Customization basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Calibrating Cintiq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Adjusting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Factory presets, auto-sync, and user settings . . . . . . . . . . . . . . . . . . 35
On Screen Display (OSD) settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Adjusting clock and phase (VGA only) . . . . . . . . . . . . . . . . . . . . . . . . 39
Power saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Contents
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Testing Cintiq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Testing controls and input tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Testing the ExpressKeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Testing the Touch Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Testing a pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Display troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
General display problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
VGA problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Pen tablet troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Windows-specific problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Macintosh-specific problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Technical support options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Obtaining driver downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Caring for Cintiq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Replacing the pen tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Optional display configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Using an alternate mount or stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Pen and digital ink capabilities in Windows Vista . . . . . . . . . . . . . . . . . . . . 60
About the Windows Vista Tablet PC Input Panel . . . . . . . . . . . . . . . . . 61
Uninstalling Cintiq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Product specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
General specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Pen tablet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Display stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Power adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Grip pen (model ZP-501E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Ordering parts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Radio and television interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Federal Communications Commission (FCC) notice . . . . . . . . . . . . . 67
Industry Canada (Canada only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
CE declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Warranty
(Worldwide, Except for Europe, Africa and Middle East) . . . . . . . . . . . . . . 69
Contents
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
UNPACKING YOUR CINTIQ
PACKAGE CONTENTS
You will find the product parts and accessories packed together in the accessories box. To avoid
damaging your product, please review the instructions on the following pages before setting up
or using Cintiq or the Cintiq stand. Your product came with the following items:
Cintiq 21UX pen display, main unit
with attached cable
Cintiq stand (MST-A103)
*Patented
Parts and accessories
Grip Pen with replacement nibs, pen stand, and nib removal set
(ZP-501E, PST-A034, and FUZ-A131)
Rotation lock screws (qty 2)
(MNE-059)
VGA to DVI-I adapter
(STJ-A262)
Bearing hub recess
cover plate and screws
(PPL-A155)
Installation Guide & Hardware Manual
(this manual)
DVI-D to DVI-I adapter
(STJ-A263)
Wacom Pen Tablet Driver CD
(contains the driver software)
Power supply
(POW-A098)
and power cable
Note: Images not shown to scale. Some package configurations may include additional CDs or DVDs
containing application software. To install these applications, review the instructions that came with those CDs
or DVDs. Retain the package box for use when storing or shipping Cintiq.
Next step: Set up the Cintiq stand. See page 9.
Unpacking your Cintiq
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE CINTIQ STAND
Place the stand on your desktop or work surface, making sure the stand is stable and will not tip or fall
when the pen display is mounted on it. Then familiarize yourself with the stand components.
WARNING
Do not operate the incline adjustment levers when Cintiq is not mounted on the stand, and do not
lift the stand by the adjustment levers; the stand is spring-loaded and may cause injury or damage
if released without the weight of Cintiq on the stand. Improper operation may lead to physical
injury or damage to the stand. Be careful to avoid catching your finger in the gap of the movable
portion of the stand.
Incline adjustment levers
When Cintiq is mounted on the stand, use these levers
to adjust the display incline, as described in Adjusting
the display incline on page 11.
Bearing recess
Front feet
Rear feet
The front feet have rubber pads to reduce stand
slippage on the desktop when adjusting incline.
The rear feet are on
rollers, allowing the
feet to move when
adjusting incline.
Next step: Unpack the pen display and mount it on the Cintiq stand. See page 10.
Unpacking your Cintiq
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
UNPACKING AND MOUNTING THE CINTIQ PEN DISPLAY
Remove any packing materials from the back of the display unit and cabling.
To mount Cintiq on the stand:
•
Make sure the stand is stable on your desktop or other work surface and will not tip or fall when
Cintiq is mounted on it. Securely grasp Cintiq with both hands so that the display faces toward you,
with the power switch and LEDs located at the top.
Align Cintiq parallel to the front of the stand so that the bearing hub is located between the
V-shaped upper edges of the stand’s bearing recess. See – A – (The V-shaped edges of the
stand will serve as a guide for positioning the bearing hub.)
•
With the back of Cintiq resting against the stand, lower Cintiq until the bearing hub rests securely in
the bearing recess of the stand. See – B – on the following page. The display unit will be held in
place by gravity; there will be no audible ‘snap’ that indicates a mechanical lock.
Note: If you do not need to rotate the Cintiq pen display, you may want to secure it to the stand with the
rotation lock screws. For information on this, see Optional display configurations on page 56. To learn about
other mounting options, see Using an alternate mount or stand on page 57.
Bearing hub
Bearing recess
– A –
Unpacking your Cintiq
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
When operating the incline adjustment
levers, Cintiq must be mounted on the
stand with the stand feet resting on a
stable, flat surface. The stand is
spring-loaded and can snap back
quickly, causing injury or damage if
not operated properly.
– B –
After the display unit has been mounted on the
stand, remove the foam blocks that lock the
adjustment levers in place. Save these blocks
with the other packaging materials; you will
need them if in the future you want to ship
Cintiq.
ADJUSTING THE DISPLAY INCLINE
To adjust the display incline, face the front of the Cintiq pen display and grasp it on the left and right side
at approximately the same height as the Cintiq stand adjustment levers. Use your fingertips to gently
pull the incline adjustment levers toward the display unit; this will release the stand’s clutch mechanism.
Tilt the display to adjust the incline setting.
•
To lower Cintiq, pull the left incline adjustment lever toward Cintiq and gently lower Cintiq to the
desired incline angle. Release the lever to lock the stand in place.
•
To raise Cintiq, pull the right incline adjustment lever toward Cintiq and gently raise Cintiq to the
desired incline angle. Release the lever to lock the stand in place.
Note: The stand adjustment levers exhibit some natural play before the clutch mechanism engages.
When adjusting the stand incline, set it slightly higher than you plan to work with, then lower the display to the
desired position.
WARNING
Before moving Cintiq, first adjust the stand to its full upright position; this will reduce the spring
tension so that the stand will not accidentally release and snap shut. If the display unit is in
landscape orientation, use one hand to grasp the bottom of the display and with your other
hand grasp the back of the stand. Be sure to lift on both the display and the stand so that the
stand will not separate from the display when moving Cintiq. If Cintiq is in portrait orientation or
has been locked to the stand with the rotation lock screws (see page 56 for details), the stand
will not separate from the display unit and Cintiq can be safely lifted by grasping the display unit
with both hands.
Unpacking your Cintiq
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING ROTATION
The pen display can be rotated on the display stand when the incline is less than or equal to 25
degrees.
To adjust rotation, grasp Cintiq by the main body and rotate the unit to the desired position; it will move
on the bearing hub. You can only rotate the display unit 180 degrees in either direction. If you do not
plan to rotate the Cintiq, use the rotation lock screws to fasten the display to the stand in a horizontal
position. See Optional display configurations on page 56 for more information.
USING THE PEN HOLDER
The integrated pen holder is located at the back of the pen display tablet.
Note: The pen holder is not available for use when routing the cable to exit through the top cable opening.
Next step: Go to page 14 and familiarize yourself with the pen display.
Unpacking your Cintiq
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOVING CINTIQ FROM THE DISPLAY STAND
To remove Cintiq from the display stand:
•
•
If the rotation lock screws are attached, remove them from the back of Cintiq.
Position the pen display to landscape orientation before removing it from the display stand.
The stand will not release unless Cintiq is in landscape orientation.
•
•
Next, raise the stand incline to the highest position. See Adjusting the display incline on page 11
for instructions.
Firmly grasp the pen display on both the left and right sides of the body, and lift the unit out of the
display stand.
Important: When removing Cintiq from the display stand, always lift Cintiq in a direction
parallel to the front of the stand. You may also need to rotate Cintiq slightly so the stand will
release.
Note:When packing Cintiq for transport, first adjust the stand to its lowest position and place the foam packing
blocks under the incline adjustment levers before removing Cintiq from the stand. The foam blocks will keep
the stand from snapping shut while in its packaging. Always pack Cintiq and its stand in their original
containers and protective cushions. Never pack Cintiq while it is mounted on the stand; this may damage the
unit or stand during transportation.
Unpacking your Cintiq
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
CINTIQ PEN DISPLAY COMPONENTS
After the Cintiq pen display is safely mounted on the Cintiq stand, take some time to familiarize yourself
with its features and components.
The display and tablet sensor function as an integrated output and input device. The display supports
resolutions up to 1600 x 1200 pixels at 16.77 million colors. The tablet sensor reports pen coordinates,
pressure, tilt, switch, eraser, and other information.
FRONT VIEW
Status LED
Power LED
Lights blue when the pen is in the
active area of the pen display tablet
and the pen tip, eraser, or side switch
are pressed. The USB cable connector
must be plugged into an active USB
port and a video signal must be
Lights blue when power has been supplied to
Cintiq and a video signal is present.
Glows orange when no video signal is
detected by Cintiq. (e.g., Your computer is
turned off, starting up, or has entered a power
management mode in which video signals
are not sent.)
Power switch
Turns power on
or off.
present before the LED will light.
Touch Strip
Touch Strip
Slide your finger over
the Touch Strips to
zoom, scroll, or perform
custom keystroke
actions. See Tablet
controls on page 27.
ExpressKeys
These customizable keys simulate modifier keys, keystrokes,
and other frequently used functions. A display toggle
function is also available, enabling you to toggle the screen
cursor between the Cintiq pen display and your other
displays. See page 27.
ExpressKeys
Integrated display and tablet
Cintiq pen display components
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR VIEW
Digital/Analog (DVI/VGA) switch
Set this switch for the video
connection you will be using.
On Screen Display (OSD) controls
Use these controls to adjust a variety of display settings.
See Adjusting the display on page 35.
Integrated pen holder
and alternate cable exit
The pen can be stored here. If you are not
using the Cintiq stand supplied with the unit,
you can route the cable to exit from this
location. See Using an alternate mount or
stand on page 57.
Bearing hub
Fits into the bearing recess on the Cintiq
stand. Allows rotation of Cintiq, and easy
mounting and removal from the stand.
Cabling and connectors
The connectors on the integrated cable
are for DVI-I video, USB data, and power.
Important: Always store the pen display on the Cintiq display stand or in its original
packing carton when not in use. Do not store the display unit on a surface that would
excessively bend or crimp the cable.
Next step: Installation. See page 16.
Cintiq pen display components
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SYSTEM REQUIREMENTS
Before installing Cintiq, make sure your computer meets the following minimum system requirements:
•
•
PC. Windows Vista™, Vista x64, XP, XP x64, or 2000. DVI or VGA video connector, available USB
port, and CD-ROM drive.
Macintosh. OS X, v10.3.9 or greater. DVI or VGA video connector, available USB port, and
CD-ROM drive. ADC connectors require an ADC to DVI-I adapter, not included.
Cintiq supports both digital (DVI) and analog (VGA) video signals. If updating your video card,
complete the video card hardware and software installation before connecting Cintiq. If you have
another display that is compatible with your video card, you can connect that display to the card in order
to verify the video card is operating correctly.
Using the VGA to DVI-I adapter, you can connect Cintiq to a VGA video card. However, connecting
Cintiq to a DVI video card generally results in optimum performance.
Notes: Cintiq can be used alone or with another display, such as a CRT monitor or LCD projector. To use
Cintiq with another display, you will need two video cards or a video card with dual output.
Depending on the capabilities of your video card and operating system, you may be able to set up Cintiq as a
mirrored, extended, or independent display. Refer to your video card documentation for more information on
its capabilities.
When you are working with more than one display, Cintiq will map to the displays based upon how your system
is configured. By default, if you are in mirror mode, the pen tablet will map to the entire space on each display.
Please refer to your hardware and operating system documentation for details on configuring your computer
and operating system for use with multiple displays.
A display toggle function is available for use with multiple display systems. This enables you to toggle the
screen cursor between the Cintiq pen display and your other displays. For more information, see Using
ExpressKeys on page 28.
There are two primary steps to the installation process:
•
•
Step 1: display installation
Step 2: pen tablet installation
Follow ALL installation instructions carefully.
Installation
Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: DISPLAY INSTALLATION
In this step, Cintiq is installed as a display on your system.
Important: Do not connect the USB data cable until instructed to do so.
•
•
Turn off your computer.
Caution: Never connect or disconnect the video or power cables while your computer or Cintiq are
powered on – this can damage the display or video card.
If your computer has only one video connector, you will need to unplug your previous display.
Determine if your computer has a digital (DVI) or analog (VGA) connector, and set the DVI/VGA
switch located on the back of Cintiq for the video connection you are using. Move the switch toward
the tablet edge for Digital (DVI-I or DVI-D), and move it toward the OSD buttons for ANALOG (VGA).
See – A – in the connection diagram on page 19.
•
Making sure to tighten the thumbscrews on the connectors, follow the instructions below for your
video connector. See – B –
For DVI-I operation, plug the Cintiq video cable into the DVI-I connector
of your video card.
DVI-I connector
For DVI-D operation, plug the Cintiq video cable into the DVI-D to DVI-I
adapter supplied with Cintiq, and then plug the adapter into the DVI-D
connector on your video card.
DVI-D connector
For VGA operation, plug the Cintiq video cable into the VGA to DVI-I
adapter supplied with Cintiq, and then plug the adapter into the VGA
connector on your video card.
VGA connector
Installation
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
If connecting to an Apple ADC or mini-VGA connection, you will need
to obtain an appropriate adapter. Adapters can be purchased at
various retail outlets.
For ADC operation, plug the Cintiq video cable into the ADC to DVI-I
adapter. Then plug the ADC adapter end into the ADC connector on
your video card.
Apple ADC
connector
For an Apple mini-VGA connector, plug the Cintiq video cable into the
VGA to DVI-I adapter (supplied with Cintiq). Plug the mini-VGA
adapter into the computer’s mini-VGA port. Then plug the male and
female VGA connectors together.
Mini-VGA port
•
•
•
Connect the power adapter to Cintiq. See – C – on the next page.
Then connect the adapter’s power cable and plug the adapter into an AC outlet. See – D –
Turn on Cintiq. The power LED will light orange.
Installation
Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY CABLING DIAGRAM
DVI/VGA switch
CAUTION
Make sure your video card has
a DVI or VGA connector, and
that you correctly set the Cintiq
DVI/VGA switch for the video
connector you are using.
– A –
Do not attach the USB data
cable until instructed to do so.
Cintiq, rear view
– B –
– C –
DC INput
Video card
DVI or VGA
DVI-I connector
To connect to a DVI-D connector,
use the DVI-D to DVI-I adapter.
To connect to a VGA connector,
use the VGA to DVI-I adapter.
Rear panel of your computer
– D –
Power adapter
To AC outlet
CAUTION
Use only the power adapter that came with Cintiq; use of an improper power adapter may
damage the unit.
Do not connect or disconnect the video or power cables while Cintiq or your computer
are turned on – this can damage the display or computer video card.
Make sure that the display refresh rate does not exceed 85 Hz (60 Hz for UXGA).
Installation
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Next, turn on your computer.
For Windows systems, Cintiq will automatically install as a default display. If you want Cintiq to be
identified as a Cintiq display and if you want to install the color calibration profile for Cintiq, follow
the instructions below to update the display driver for Cintiq:
1. Open the CONTROL PANEL folder.
•
For Windows Vista, under APPEARANCE AND PERSONALIZATION select ADJUST
SCREEN RESOLUTION.
•
For other Windows versions, open the DISPLAY PROPERTIES control panel and select
the SETTINGS tab.
Note: If you have more than one display and you need help in determining which display
corresponds to Cintiq, click the IDENTIFY monitors button. Select the display for Cintiq.
2. Click the ADVANCED settings button.
3. Select the MONITOR tab and click the PROPERTIES button.
4. Select the DRIVER tab and click the UPDATE DRIVER... button. An update driver dialog or
Wizard will appear.
5. Insert the Wacom Pen Tablet Driver CD. If the Wacom Tablet installation menu displays,
close it.
Windows Vista:
•
•
•
Select the option BROWSE MY COMPUTER FOR DRIVER SOFTWARE.
Enter the drive letter for the Wacom Pen Tablet Driver CD and click NEXT.
After the installation is complete, close any open control panel windows.
Windows XP:
•
•
•
•
•
The Wizard will ask if Windows can search for software. Choose NO, NOT THIS TIME
and click NEXT.
Select the option INSTALL FROM A LIST OR SPECIFIC LOCATION (ADVANCED), and click
NEXT.
Select the option DON’T SEARCH. I WILL CHOOSE THE DRIVER TO INSTALL and click
NEXT.
Select the Cintiq pen display option and then click the HAVE DISK... button. Enter the
letter of your CD-ROM drive (e.g., E:\), and click OK.
Follow the prompts to continue. (If the HARDWARE INSTALLATION dialog box displays,
click CONTINUE ANYWAY to accept the driver.) After the installation is complete, click
the FINISH button and close any open control panel windows.
Windows 2000:
•
•
Follow the prompts selecting the default options.
If a signing warning dialog box displays, click YES to accept the driver. After the
installation is complete click the FINISH button to close the Wizard and then close the
DISPLAY PROPERTIES control panel.
Installation
Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
For Macintosh systems, a Cintiq color profile will be added to your computer’s color management
system during the tablet software driver installation process. To activate this color profile for use
with Cintiq, you may need to select the Cintiq 21UX profile in the system’s ColorSync Utility control
panel. For more details, see the color management information in your operating system and
application documentation.
•
As necessary, configure the display control panel settings for the proper size and color resolution.
The maximum (native) resolution of the Cintiq 21UX is 1600 x 1200 pixels with 24 bit color.
The display size and color resolution may be constrained by the capabilities of your video card.
See the video card manufacturer’s documentation for details.
For Windows: If you are using Cintiq as a secondary display, you may first need to enable Cintiq in
your Display Properties control panel.
•
•
If using analog (VGA) mode, you may want to fine-tune the display. See Adjusting clock and phase
(VGA only) on page 39 and Adjusting the display beginning on page 35.
After the display portion of Cintiq is working to your satisfaction, move on to Step 2: pen tablet
installation to install the pen tablet portion of Cintiq. For troubleshooting tips, see page 41.
Notes:
Each Cintiq LCD panel is produced under stringent quality standards. Production techniques cannot
guarantee an absolutely perfect TFT display, and some panels may exhibit a certain number of pixels that
show an incorrect color. See the specifications on page 63 for more information.
If an image has fine striping (such as screen stripes), it may appear to flicker or display a moiré pattern.
Do not apply excessive pressure on the display surface, it may cause the appearance of a moiré or pooling
pattern. If this occurs, use less pressure on the display screen when working with the pen.
When a still image is displayed for a long period of time, an after-image may remain for a short time.
To prevent this, Wacom recommends using a screen saver or other power management feature.
Important: To extend the life of the backlight, set your computer’s power management to turn off
the display when it is not in use for extended periods of time.
Installation
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2: PEN TABLET INSTALLATION
USB CABLE INSTALLATION
Plug the USB connector into an available USB port on your computer or into a USB hub attached to
your computer. See – E – in the connection diagram below.
Next, move on to the pen tablet Software installation on page 23.
PEN TABLET USB CABLING DIAGRAM
To Cintiq
– E –
To USB port
Your computer
Installation
Page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE INSTALLATION
IMPORTANT:You MUST install the Wacom pen tablet driver software for correct pen-on-screen
functionality.
To install the tablet software:
•
•
Save your work and close all open applications. Temporarily disable any virus protection programs.
Insert the Wacom Pen Tablet Driver CD into your computer’s CD-ROM drive. If the software
installer menu does not automatically display, double-click on the INSTALL icon located on the CD.
•
•
•
Click on the INSTALL TABLET link and follow the prompts to install the driver software.
Reactivate your virus protection program.
After completing the software installation, make sure you can use your pen on the Cintiq display to
move the screen cursor.
When you place the pen tip on the display screen, the screen cursor should immediately jump to a
corresponding position approximately beneath the pen tip. Lift the pen tip and place it on the
display screen surface in a different location – the screen cursor should again jump to the new
position. This is known as absolute positioning, and enables you to position the screen cursor
without having to drag your pen across the display screen surface.
•
Be sure to check the Read Me file for updated information. If you have trouble installing Cintiq, see
the Troubleshooting section beginning on page 41.
Notes:
For Windows Vista, driver installation automatically activates the new pen input functions available within
Windows Vista and Office 2007 (except for Windows Vista Home Basic).
For Windows Vista, XP, and Macintosh OS X, user-specific preferences are supported. After logging in, each
user can customize their personal settings in the Wacom Tablet control panel. Switching to another user will
automatically load the settings for that user.
To uninstall the tablet driver, see Uninstalling Cintiq on page 62.
Next steps:
Adjust the pen display tablet calibration to precisely align the screen cursor to the pen tip. See Calibrating
Cintiq on page 34.
To learn more about using Cintiq, proceed to Working with your Cintiq on page 24.
Installation
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
WORKING WITH YOUR CINTIQ
USING THE GRIP PEN
As you work with Cintiq, you can rest your hand lightly on the display screen, just as if it were a drawing
board or sheet of paper. The pen is cordless, battery-free, and senses the amount of tilt and pressure
you exert upon it. Hold the Grip Pen as you would a normal pen or pencil. Make sure the DuoSwitch is
in a convenient location where you can toggle it with your thumb or forefinger, but not accidentally press
it while drawing. You can tilt the pen in any way that feels most comfortable for drawing.
Eraser
Note: When the Grip
Pen is not in use, place
it in the pen stand, the
pen holder, or lay it flat
on your desk.
To maintain the
DuoSwitch
(side switch)
sensitivity of your pen,
do not store the pen in
a container where it
will rest on its tip or
eraser.
Tip Switch
(replaceable nib)
PEN COMPONENTS
The components of your Cintiq Grip Pen function in the following manner:
Pen tip: The pen is activated as soon as it is brought within 5 mm (0.2 inch) of the pen display screen.
This allows you to position the screen cursor without touching the pen tip to the display screen.
When pressure is applied to the pen tip, the tip switch is turned on and the pen simulates a primary
mouse button click. The tip click pressure can be adjusted in the Wacom Tablet control panel.
DuoSwitch: The DuoSwitch is programmable, and can be used to perform the same click and double-
click functions as the tip switch. Toggle the DuoSwitch in either direction to activate the upper or lower
button functions. You can use the DuoSwitch whenever the pen tip is within 5 mm (0.2 inch) of the
tablet surface; you do not need to touch the pen tip to the tablet in order to use the switch. By default,
the upper switch is set to DOUBLE CLICK and the lower switch is set to RIGHT CLICK.
Eraser: When the eraser is brought within 5 mm (0.2 inch) of the display the tablet reports the pen
location. Pressure information is reported as you press down on the eraser. By default, the eraser
function is set to ERASE.
Important: Only use a pen that is compatible with Cintiq, such as the pen that shipped with the
unit, or any of the pens from the Intuos3 product line (see Accessories on page 65).
Other pens may not function properly. Also, the Cintiq pen tip is specifically designed for use
with the Cintiq pen display – the tips on other pens could damage the protective coating on the
Cintiq display screen.
Refer to Customizing on page 32 and to the electronic Software User’s Manual for information on
customizing the pen settings.
Working with your Cintiq
Page 24
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PEN OPERATIONS
Pointing and selecting: Move the pen slightly above the Cintiq display screen to
position the screen cursor; you do not need to touch the tablet surface to move the
screen cursor. The cursor jumps to the location where you place the pen. Press the
pen tip on the display screen to make a selection.
Note:You must calibrate the pen display tablet to correctly align the screen cursor with the
pen tip. (See Calibrating Cintiq on page 34.) If the screen cursor does not jump to a position
close to the pen tip when you place the pen on the display screen, then the pen tablet driver
may not be installed or is not loading. Install the pen tablet driver software if necessary.
Otherwise, refer to Troubleshooting, beginning on page 41.
Clicking: Tap the display screen once with the pen tip, or touch the pen to the
display screen with enough pressure to register a click.
Windows tip:To make navigating with the pen easier, configure Windows to select when the
pen is over an icon and to launch the icon with a single click. To turn on this feature, first open
a folder.
For Windows Vista, from the ORGANIZE pull-down menu choose FOLDER AND SEARCH
OPTIONS. From the GENERAL tab select SINGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).
For other Windows versions, from the TOOLS pull-down menu choose FOLDER OPTIONS....
From the GENERAL tab select SINGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).
Double-clicking: Press the upper side switch, or quickly tap the display
screen twice in the same place with the pen tip. Double-clicking is
easier when the pen is perpendicular to the tablet screen. To fine-tune
the double-click area, refer to the electronic Software User’s Manual.
Dragging: Select an object, then slide the pen tip across the display
screen to move the object.
Working with your Cintiq
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the side switch: The pen is equipped with a DuoSwitch. This switch has two programmable
functions that can be selected by rocking the switch in either direction. You can use the DuoSwitch
whenever the pen tip is within 5 mm (0.2 inch) of the tablet surface; you do not need to touch the pen tip
to the tablet in order to use the switch. By default, the upper switch is set to DOUBLE CLICK, and the
lower switch is set to RIGHT CLICK.
Drawing and writing with pressure sensitivity: The pen responds to the nuance and inflection of
your hand movements, enabling you to create natural-looking pen and brush strokes within applications
that support this feature. To draw and write with pressure, select a pressure-sensitive tool from your
application’s tool palette. As you work on the screen surface, use various amounts of downward
pressure on the tip of the pen. Press lightly for thin lines or softer color. Press harder for thick lines or
dense color.
Drawing with tilt: The pen display tablet recognizes when you tilt the pen from vertical to incline
positions. In supporting applications, tilt can be used to control line shape and thickness.
Erasing: In supporting applications, the pen’s eraser works like the eraser on a
pencil. In text applications, use the eraser to select text, then lift the eraser from the
tablet to delete the text.
Working with your Cintiq
Page 26
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLET CONTROLS
To speed up your workflow in graphics or other applications, your Cintiq pen display features
ExpressKeys and Touch Strips. While using the pen with your dominant hand, you can simultaneously
use your other hand to operate the ExpressKeys or Touch Strip.
Touch Strip
Slide your finger over the Touch Strip to zoom, scroll, or issue an assigned keystroke
function. By default, the Touch Strips enable you to zoom in most graphics
applications and to scroll in other applications. You can also set them to issue
custom keystrokes. For example, you might set a Touch Strip function to change
brush sizes when working in Photoshop. See Using the Touch Strips on page 29.
ExpressKeys
Press the customizable ExpressKeys to perform frequently used
functions or keystrokes. By default, the keys emulate keyboard modifier
keys. In Photoshop, this provides quick access to the grabber hand and
alternate tools.
A display toggle function is also available for use on multiple monitor
systems. This feature allows you to use your pen on the Cintiq pen
display to navigate the screen cursor to any display on your system.
See Using ExpressKeys on page 28.
Working with your Cintiq
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
USING EXPRESSKEYS
As you work with your pen on the display tablet surface, press an ExpressKey to toggle between tools
or change tool properties. You can work with the default settings, or choose from any of the other
available functions. The default settings were chosen to optimize your workflow in Photoshop and other
graphics applications, using the following modifier functions:
Button 1: CTRL modifier key for Windows. COMMAND (Apple key) for Macintosh.
Button 2: SHIFT modifier key.
Button 3: ALT modifier key for Windows. OPTION modifier key for Macintosh.
Button 4: SPACE key (spacebar).
2
3
2
3
1
1
4
4
The ExpressKeys are chordable. For example, pressing keys 3 and 1 together simulates ALT+CTRL in Windows,
or OPTION+COMMAND on Macintosh systems.
Tips:
•
In Photoshop, pressing the spacebar (key 4 on your display tablet) switches the currently selected tool to the
hand tool and lets you pan (move) the image within the application window.
•
In Photoshop and many other graphics applications, the ALT, CTRL, and SHIFT modifier keys modify a tool or
switch to a complementary tool while the modifier key is pressed.
The ExpressKeys are fully customizable, enabling you to make the best possible use of them. Here are
a few ideas on how you can use the ExpressKeys:
•
Set a pair of keys to commonly used keystrokes, such as [ and ] to decrease and increase your
brush size in Photoshop.
•
•
Set a key to a commonly used keyboard shortcut in order to open files or start an application.
If you prefer not to (or cannot) use the side switches on your Grip Pen, then set a key to right- or
double-click.
•
•
Choose from any of the other available functions.
On multiple display systems only, set an ExpressKey or pen switch to DISPLAY TOGGLE. You can
then press that button to toggle the screen cursor between Cintiq and your other displays.
See the electronic Software User’s Manual for more details on the available key settings.
Working with your Cintiq
Page 28
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TOUCH STRIPS
Slide your finger over the Touch Strip to quickly zoom in or out, scroll up or down, or perform other
functions with your secondary hand while using your primary hand to work with the Grip Pen. You can
also set each Touch Strip to issue custom keystrokes. For example, you might set a Touch Strip action
to cycle through layers when working in Photoshop. The Touch Strips can be operated in three different
ways:
•
•
•
Standard operation: Slide your finger up or down to zoom, scroll, or issue the assigned keystroke
function.
Continuous operation: Press and hold your finger at either end of the Touch Strip to continuously
scroll. This is useful for scrolling through long documents or web pages.
Single step operation: Press and release your finger at either end of the Touch Strip to zoom,
scroll, or issue the assigned keystroke function one step at a time.
Press and hold here
for continuous
operation, or press and
release for single step
operation.
By default, the Touch Strips enable you to zoom in most graphics applications and to scroll in other
applications. Each Touch Strip can be independently customized to meet your needs.
Note that the Touch Strips are quite sensitive. If you find yourself accidentally activating a Touch Strip
with your drawing arm, open the Wacom Tablet control panel and disable the Touch Strip on your
drawing arm side.
Tip: Photoshop users who frequently change brush sizes may want to assign the [ and ] keys to
a Touch Strip. Sliding your finger up or down the Touch Strip will then change the brush size without
the need to reach for the keyboard or access the Photoshop BRUSHES palette.
Refer to the electronic Software User’s Manual for detailed information on customizing the way your
display tablet Touch Strips work.
Working with your Cintiq
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP YOUR WORK AREA
The Cintiq 21UX pen display and stand were designed to provide you with the widest possible range of
flexibility and ergonomic work approach. The design allows you to quickly adjust Cintiq to a different
position whenever the need arises. You may want to experiment with different height adjustments to
determine which best fits your particular working style and tasks.
As you work with Cintiq, you can rest your hand lightly on the display screen, just as if it were a drawing
board or sheet of paper.
To minimize fatigue, organize your work area so you can work comfortably. Position Cintiq, the Grip
Pen, and your keyboard so they are easily accessible without unnecessary reaching. The pen display
tablet and any other displays should be positioned so you can view them comfortably with a minimum of
eyestrain.
Here are some other points to keep in mind:
•
•
•
•
Take short breaks between tasks to stretch and relax your muscles.
Use a gentle grip when working with the pen.
Alternate tasks throughout the day.
Maintain a good posture at all times. Minimize awkward postures and repetitive movements that
cause discomfort. Change your position if you feel any discomfort due to your work position.
•
Alternate between different modes of use.
Note: Wacom makes no representation, promise or guarantee that Wacom products will cure or prevent, in
whole or in part, mouse-induced repetitive stress symptoms, injuries or conditions. Individual results may vary.
Always obtain competent medical advice to determine the most appropriate treatment for your specific
situation.
By adjusting the Cintiq stand to its lowest
Adjusting the Cintiq stand to its highest
position is common when your work requires a
large amount of keyboard input. This position
is also useful when presenting your work to
co-workers or clients.
position, the pen display unit can be freely
rotated on the display stand without touching
the desktop. In this position, Cintiq emulates
a traditional animator’s table and gives you
the freedom to rotate the display unit to any
angle for the greatest comfort and accuracy
of stroke while drawing or editing images.
Working with your Cintiq
Page 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints:
•
If the rotation lock screws are attached to the back of Cintiq, they must be removed before
Cintiq can be rotated.
•
•
Before rotating the display unit, be sure the cable is freely rotating behind the unit.
Because the Cintiq drawing surface will be a little higher than your desk, consider adjusting the
height of your desk or chair to assure comfortable use of the device.
•
Do not pull the cable out of its computer connections by accidentally moving the pen display
tablet too far from the computer.
Note: Cintiq can also be mounted to articulated arms or other third-party stands meeting the VESA 100
specification for monitor stands. See Using an alternate mount or stand on page 57 for details.
Next step: If you have not already done so, learn about the basics of customizing the Grip Pen.
See Customizing on page 32.
Working with your Cintiq
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING
After you master the basics of using your Grip Pen on the Cintiq pen display, you may want to
customize the way the pen or pen display works. The Wacom Tablet control panel makes it easy to
customize Cintiq and the pen.
OPENING THE CONTROL PANEL
To open the control panel, use the Cintiq pen on the pen display tablet:
Windows. Click on the Windows START button and choose ALL PROGRAMS.
(For Windows 2000, choose the PROGRAMS group.) Then select WACOM
TABLET and choose the WACOM TABLET PROPERTIES option.
Macintosh. Open SYSTEM PREFERENCES from either the Dock, the Apple
menu, or from the APPLICATIONS folder. Then click on the WACOM TABLET
icon.
After opening the control panel, see Customization basics on page 33.
Note:
For Windows Vista, XP, and Macintosh OS X, user-specific preferences are supported. After logging in, each
user can customize their personal settings in the Wacom Tablet control panel. Switching to another use will
automatically load the settings for that user.
LEARNING MORE ABOUT CINTIQ
See the electronic Software User’s Manual for detailed information on customizing Cintiq.
To view the manual, open the Wacom Tablet control panel and click on the HELP button.
To read the Software User’s Manual before installing Cintiq, first insert the Wacom Pen Tablet Driver CD
into your computer’s CD-ROM drive. When the software menu appears, select the USER’S MANUAL
option.
You will need Adobe Reader or another .pdf viewer to view the manual.
Customizing
Page 32
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZATION BASICS
This manual only covers the basics of customizing Cintiq. For detailed information see the Cintiq
Software User’s Manual.
Open the Wacom Tablet control panel to customize your product. When you open the control panel, an
icon for the Grip Pen is displayed in the TOOL list and the appropriate tabs are displayed. To customize
the pen, make your changes to the tab controls. Experiment with different settings to find what works
best for you. Any changes you make will take effect immediately, but you can always click DEFAULT to
return to the factory settings.
Note: Application-specific settings are for advanced users. This topic is covered in the Cintiq Software User’s
Manual.
The upper portion of the control panel displays icons representing your
TABLET, TOOLs, and the APPLICATIONs with customized tool settings.
Closes the control panel.
Choose FUNCTIONS
to customize your
ExpressKeys,
Touch Strips, and
Pop-up Menu
settings.
Tabs display
customizable
settings for the
selected tool.
Choose GRIP PEN
to customize your
Grip Pen settings.
Displays a dialog
box containing
information
about the tablet
and tablet
software,
Resets the selected
tab to its default
settings.
including an
option to access
the DIAGNOSTICS
dialog box.
Displays advanced options.
Displays the electronic
Software User’s Manual.
Customizing
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
CALIBRATING CINTIQ
You must calibrate the pen display tablet in order to align the screen cursor with the position of the pen
on the display screen. This is required to adjust for parallax caused by the display screen cover glass
and coating. Set Cintiq in its working position, then follow the procedure below.
Important: When using a VGA connection,
make sure the Cintiq is properly adjusted
before calibrating the tablet. See Adjusting
clock and phase (VGA only) on page 39, and
Adjusting the display beginning on page 35.
•
•
In the Wacom Tablet control panel, select the
Grip Pen from the TOOL list and then select the
CALIBRATE tab.
If you are working with multiple monitors,
select the MONITOR option corresponding to
the Cintiq display. (Only monitors that are set
to one of the resolutions supported by Cintiq
will appear in the list.)
•
•
Click on the CALIBRATE... button to activate the
calibration screen.
Hold the pen and position your head as you
normally do when working with the pen
display. Use the pen tip to click on the center
of the crosshairs in the upper-left corner.
Crosshairs
•
•
Then click on the center of the crosshairs that
are displayed in the lower-right corner.
Test the alignment by positioning the pen at a
few different points on the display. Click OK to
accept the calibration. Click TRY AGAIN to
recalibrate.
Be sure to read the directions in the calibration
screen for detailed instructions and additional
options. The calibration setting applies to all
applications.
Note: If more than one pen display tablet is
installed on your system, be sure to select the
Cintiq unit you are working with from the
control panel’s TABLET list.
Adjustment pattern for clock and phase.
See Adjusting clock and phase (VGA only)
on page 39 for details.
Tip: If you prefer to see the screen cursor slightly offset from the actual position of the pen tip, calibrate by
clicking on a spot showing that offset from the crosshairs. For example, to have the screen cursor appear
1/10th of an inch above and to the left of the pen tip, calibrate by clicking on a spot 1/10th of an inch below
and to the right of the crosshairs.
Customizing
Page 34
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE DISPLAY
FACTORY PRESETS, AUTO-SYNC, AND USER SETTINGS
Factory presets: For optimal display quality, set your video card to Cintiq’s native resolution of
1600 x 1200 pixels (UXGA). See page 63 for signal specifications.
Auto-sync: The auto-sync function automatically sets the horizontal and vertical screen position, as
well as clock and phase. When connected as a VGA display, Cintiq attempts to automatically
synchronize to the incoming signal. At the native resolution of 1600 x 1200, the vertical refresh
frequency must be set to 60 Hz. For other resolutions, auto-sync will function when the horizontal
frequency is between 31 to 92 kHz and the vertical frequency is between 56 to 85 Hz. If a specific
resolution and vertical refresh frequency are not supported, you will see an “invalid mode” message.
In this case choose a different resolution or refresh frequency.
If Cintiq does not automatically synchronize with the incoming signal, you can press the AUTO adjust
button to initiate display synchronization. Additional screen display adjustments can be manually made
using the OSD controls.
User settings: When you manually adjust the display using the OSD function, the settings are stored
within Cintiq for use the next time the unit receives a similar signal. This is applicable to all display
modes.
Color calibration: Changing the color, color temperature, contrast, brightness, or backlight from their
default settings will invalidate the ICC color profile that was included on the driver CD.
ON SCREEN DISPLAY (OSD) SETTINGS
The OSD function enables you to adjust and optimize a variety of display settings at the touch of a
button. The OSD controls are located on the back of the unit. Simply reach over the top of the display
unit to locate the buttons with your fingers.
Note: Braille-style dots above the buttons help you to identify each one by touch.
Digital/Analog
(DVI/VGA) switch
MENU / ENTER button
Use this button to
open the OSD menu
and to accept
changes you make to
the OSD settings.
Up or Down buttons
Press the up or down buttons to toggle between
menu options, and to increase or decrease the
value of a selected setting.
SELECT / AUTO button
When working with the OSD menu, pressing SELECT
chooses the highlighted menu option.
In VGA mode with the OSD menu closed, pressing
AUTO performs an AUTO ADJUST of the display.
Customizing
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
The basic process for working with the OSD is as follows:
•
•
Press the MENU button to
open the OSD main menu.
Press the up or down
buttons to toggle between
the main menu icons.
Then press the SELECT
button to choose the
highlighted icon.
The Main Control icon displays a DVI or VGA identifier,
depending on which video interface is currently in use.
•
Press the up or down
buttons to toggle between
menu options. Press the
SELECT button to choose
the highlighted option.
Note that some options,
such as POSITION, are not
available when in DVI
mode.
•
Press the up or down buttons to select a setting for
adjustment. Press the SELECT button to choose
the highlighted setting.
Note that some settings may not be available when
in DVI mode.
•
•
Use the up or down buttons to increase or
decrease the setting value.
Press the ENTER button to accept your changes.
Note: After changing a setting, the OSD menu will
automatically close after a few moments of inactivity.
You can also continue to press ENTER in order to back
out of the OSD menu. All settings are automatically
saved when the OSD menu closes. If you make
changes to the display appearance and cannot return to
the original settings, go to the RESET menu and select
the FACTORY RESET option to return Cintiq to its original
factory defaults.
See the following pages for details about the OSD
menu options.
Customizing
Page 36
Download from Www.Somanuals.com. All Manuals Search And Download.
When you open the On Screen Display, the main menu icons are displayed.
Main Control.
Reset.
Provides options (DISPLAY,
IMAGE, POSITION, and
COLOR) that enable you to
fine tune your display
settings. See below for
details.
Returns the display
parameters of the current
mode to their factory default
settings.
OSD Control.
Language.
Provides options that enable
you to customize the OSD
menu. See next page.
Allows you to choose the language in which the
OSD menu will be displayed.
DISPLAY menu options are as follows:
•
•
BRIGHTNESS. Increases or decreases the image brightness.
CONTRAST. Increases or decreases image contrast.
Note that changes in contrast may affect color accuracy.
•
BACKLIGHT. Increases or decreases the backlight brightness
level.
IMAGE menu options are as follows:
•
SCALING. Enables you to choose how the image is displayed
when working at resolutions below 1600 x 1200.
1:1 displays the image at the actual resolution. FULL resizes
the image to fill the whole screen. ASPECT resizes the
image to fill as much of the screen as possible while
maintaining the correct aspect ratio.
•
•
AUTO ADJUST. (VGA only.) Choose this function to
automatically optimize the display screen image.
PHASE. (VGA only.) Synchronizes the signal timing of the
pen display to that of your graphics card. Use this
adjustment when you experience an unstable or flickering
image, or horizontal distortion lines.
•
CLOCK. (VGA only.) Changes the display data frequency to
match that of your graphics card. Use this adjustment when
you experience an unstable or flickering image, or vertical
distortion lines.
Customizing
Page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
POSITION menu options (VGA only) are as follows:
•
VERTICAL. Changes the vertical position of the image.
To automatically adjust, use the AUTO ADJUST option.
•
HORIZONTAL. Changes the horizontal position of the image.
To automatically adjust, use the AUTO ADJUST option.
COLOR menu options are as follows:
•
TEMPERATURE. Enables you to adjust the pen display color
temperature. Provides color temperature settings for
6500˚ and 9300˚ Kelvin, as well ad DIRECT and CUSTOM
options.
•
•
DIRECT displays the colors directly from the video card
without any adjustment.
RED, GREEN, BLUE. After selecting the CUSTOM color
option, you can independently adjust the RED, GREEN, and
BLUE display colors.
Note: Manual changes made to the color settings will
invalidate the Cintiq color profile.
OSD Control menu options are as follows:
•
•
•
•
VERTICAL. Adjusts the vertical position of the OSD menu
window.
HORIZONTAL. Adjusts the horizontal position of the OSD
menu window.
TRANSPARENCY. Changes the opaqueness of the OSD
menu background.
TIME OUT. Use this option to set the amount of time the
OSD menu will remain displayed with no user input.
Customizing
Page 38
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING CLOCK AND PHASE (VGA ONLY)
Some computers and video cards may not allow the auto-sync function to fully work when Cintiq is first
connected. If some portion of text appears blurred, press the AUTO button to automatically synchronize
to the incoming signal (refer to the description about auto-sync on page 35). If the image is still blurred,
adjust the clock and phase manually by following the procedure below. For optimal display quality, set
your video card to Cintiq’s native resolution of 1600 x 1200 pixels.
•
•
In the Wacom Tablet control panel, select the
CALIBRATE tab.
If you are working with multiple displays, be
sure the display corresponding to Cintiq is
selected in the MONITOR menu.
•
•
Click on the CALIBRATE... button to activate the
calibration screen.
Using the OSD controls, open the OSD main
menu. Select the IMAGE and CLOCK options,
then adjust the clock level so that the pattern
of fine vertical stripes displays evenly.
(For details on changing the OSD settings, see
On Screen Display (OSD) settings on
page 35.)
•
Next, in the OSD menu select the IMAGE and
PHASE options. Adjust the phase level so that
the adjustment pattern shows clearly.
•
•
After completing these adjustments, exit the
OSD menu.
Click on the CANCEL button or press ESC to
exit the calibration screen.
Adjustment pattern for clock and phase.
Customizing
Page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SAVING
Cintiq conforms to VESA and ENERGY STAR® power saving guidelines.
When using Cintiq with a Display Power Management Signaling (DPMS) compliant computer or video
card, the display will automatically comply with the below power saving parameters. When these
power-saving functions are in effect, the screen display is darker than usual.
Computer mode
Power ON
H-sync
Yes
V-sync
Yes
Video
Active
Power consumption
54 W, max.
Power lamp
Blue
Standby mode
Suspend mode
OFF Mode
No
Yes
Blanked
Blanked
Blanked
2 W, max.
Orange
Orange
Orange
Yes
No
2 W, max.
No
No
1 W, max.
Customizing
Page 40
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Most of the time your pen display tablet will work flawlessly. But if you are having trouble, Wacom
recommends you do the following:
1. If the Wacom tablet driver failed to load properly, first perform the recommended action in any error
message that may appear on your screen. If that does not solve the problem, continue with the
troubleshooting procedures in this chapter.
2. If Cintiq does not function properly, refer to the troubleshooting sections on the following pages.
See also Display troubleshooting on page 45, or look in the Pen tablet troubleshooting on page 47.
Your problem may be described there and you can try the solution offered.
3. Open the Wacom pen display Read Me file for late-breaking information.
4. If you are having a compatibility conflict between Cintiq and a new hardware or software product,
see Obtaining driver downloads on page 53 for information on downloading an updated software
driver. Wacom periodically updates the software driver to maintain compatibility with new products.
5. Check the FAQs (Frequently Asked Questions) on the Wacom web site for your region.
6. If you have tried the suggestions in this manual and still cannot resolve the problem, then contact
Wacom for Technical Support. See the Read Me file for information on where to obtain support for
your region.
TESTING CINTIQ
1. If Cintiq’s power LED does not light, check the following:
•
First verify that the green light on the power adapter is on. If the light is not on, check that the
power cable is properly connected to the power adapter and to an active AC outlet.
•
Check that the power adapter cable is securely connected to the Cintiq power cable and that
the Cintiq power switch is turned on. The Cintiq power LED will glow orange or blue whenever
Cintiq is on.
Important: Use only the AC adapter that came with your pen display. Other adapters may
cause damage to your product.
2. If there is no display:
•
Make sure that your computer is turned on. The power LED will light blue when the proper
video signal is received, and orange if there is no video signal or if the computer is in a power
saving mode.
•
•
Verify that Cintiq is connected to an active DVI-I, DVI-D or VGA connector and that the DVI/VGA
switch on the back of Cintiq is set to the correct video setting.
Check that your video card has been properly installed and is functional. If you have another
display that is compatible with your video card, you can connect that display to the card in order
to verify that the video card is operating correctly.
Troubleshooting
Page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Verify that the tablet and Grip Pen are working:
•
•
Press the Grip Pen tip against the display and verify that the status LED lights blue.
If the LED does not light, verify that Cintiq’s USB cable is plugged into an active USB port.
If Cintiq is plugged into a USB hub, try plugging Cintiq directly into the USB port on your
computer.
•
•
Be sure that the USB port to which you are connecting Cintiq has not been disabled. It may be
necessary to check your system BIOS setting to verify that you have connected Cintiq to an
active USB port.
The status LED will light blue when Cintiq is registered as a USB device and the pen tip is
pressed against the display.
4. Check the pen. If you cannot make a selection on the display screen with the pen:
•
•
•
•
Test the pen by pressing the pen tip or the eraser against the surface of the pen display tablet.
The status LED should light blue.
Now, without applying pressure to the pen tip but keeping the pen within 5 mm (0.2 inch) of the
pen display tablet surface, press the side switch. The status LED should again light blue.
If the status LED does not light blue for these tests, be sure you are using the correct pen that
came with Cintiq.
See Testing controls and input tools on page 43 and Testing a pen on page 44 for more
information.
If you are still having problems, you may have a defective pen or pen display.
Troubleshooting
Page 42
Download from Www.Somanuals.com. All Manuals Search And Download.
TESTING CONTROLS AND INPUT TOOLS
If the Grip Pen, or the Cintiq ExpressKeys or Touch Strips do not work as you expect, it is a good idea to
first check the assigned functions or reset them to their default conditions. A quick way to reset a pen to
its default settings is to remove it from the TOOL list by clicking on the list’s [ – ] button. After the pen has
been removed, place it back onto the display screen surface and the pen will be re-added to the TOOL
list with its default settings.
Open the Wacom Tablet control panel and click on the ABOUT button. In the dialog box that appears,
click on the DIAGNOSE... button to open the DIAGNOSTICS dialog box. The DIAGNOSTICS dialog box
displays dynamic information about the Cintiq pen display tablet and pen. This information is used
when testing Cintiq and your input tool.
If more than one Cintiq unit is connected to your system, be sure to select the unit for which you are
testing in the TABLET INFO column.
Note: When testing your tool buttons, if a button is set to POP-UP MENU or OPEN/RUN..., that function will occur
when the button is pressed. In this case you may want to change that button’s function before testing.
TESTING THE EXPRESSKEYS
1. With the DIAGNOSTICS dialog box open, observe the TABLET INFO column as you test the
ExpressKeys. If you have more than one Cintiq unit connected to your system, be sure to select
the unit you are testing from the TABLET INFO column.
2. Test the keys by clicking them one at a time. Each time you press a key, its number will be
displayed next to either the LEFT KEYS or RIGHT KEYS category, depending on which keys group you
are testing. (See Using ExpressKeys on page 28 for details on the button numbers reported.)
When you are done, click the CLOSE button to exit the dialog box.
TESTING THE TOUCH STRIPS
1. With the DIAGNOSTICS dialog box open, observe the TABLET INFO column as you test each Touch
Strip. If you have more than one Cintiq unit connected to your system, be sure to select the unit you
are testing from the TABLET INFO column.
2. Slide your finger up or down along the entire length of the Touch Strip you want to test. As you
touch and move your finger along the Touch Strip, a number will indicate the current finger position
for the respective Touch Strip next to LEFT TOUCH STRIP or RIGHT TOUCH STRIP.
When you are done, click the CLOSE button to exit the dialog box.
Troubleshooting
Page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
TESTING A PEN
1. While observing the POINTING DEVICE INFO column, bring your pen within 5 mm (0.2 inch) of the
display screen. A value for PROXIMITY, the DEVICE NAME, DEVICE TYPE, and a DEVICE S/N (serial
number) should be displayed. If you have more than one Cintiq unit connected to your system, be
sure to select the unit for which you are testing a pen in the TABLET INFO column.
2. Move your tool along the tablet surface. The X and Y DATA values should change to reflect the tool
position.
3. Test your pen switches. The Cintiq status LED should light blue each time you click with the tool tip,
press the side switch, or press the tool’s eraser to the display screen.
•
Press on the display screen surface with the tool tip – the SWITCHES state and PRESSURE value
should change. (PRESSURE should change from approximately 0% with no pressure applied to
approximately 100% when full pressure is applied.)
•
Next, press the side switch without pressing the tip to the tablet – the SWITCHES state should
change. (For the Grip Pen, do this for both positions of the DuoSwitch.)
Pen
Tip = 1, DuoSwitch (lower position) = 2,
DuoSwitch (upper position) = 3, Eraser = 1
Airbrush
Tip = 1, Side Switch = 2, Eraser = 1
•
•
Press the tool’s eraser to the display screen – the SWITCHES state and PRESSURE value should
change. (PRESSURE should change from approximately 0% with no pressure applied to
approximately 100% when full pressure is applied.)
For the optional Airbrush, move the fingerwheel forward – the WHEEL value should decrease to
a value of approximately 0 when the fingerwheel is all the way forward. Move the fingerwheel
backward – the WHEEL value should increase to approximately 1000 when the fingerwheel is all
the way back.
4. Test tilt for the x-axis by moving the pen from a vertical position toward the right; the X TILT value
should change from approximately 0 to +60. Now move the tool to the left of vertical; the X TILT
value should change from approximately 0 to - 60.
5. Test the tilt for the y-axis by moving the pen from a vertical position toward the bottom of the tablet;
the Y TILT value should change from approximately 0 to +60. Now move the tool toward the top of
the tablet; the Y TILT value should change from approximately 0 to +60.
6. For the optional Intuos3 Art Pen, test the rotation feature by placing the pen tip on the display
screen surface and slowing rotating the pen on its axis. The ROTATION value should change as you
rotate the pen.
7. When you are done, click on the CLOSE button to exit the dialog box.
Troubleshooting
Page 44
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY TROUBLESHOOTING
If you encounter problems with the Cintiq display, refer to the following tables; your problem may be
described here and you can try the solution offered. For additional information about color issues, refer
to the documentation that came with your operating system or applications.
GENERAL DISPLAY PROBLEMS
No display. The power LED is off.
•
Verify that the light on the AC power adapter is on and the power
cable is securely plugged into Cintiq’s power receptacle. Check that
Cintiq’s power switch is turned on.
No display. The power LED is
lit blue.
•
Check the contrast, brightness, and backlight controls. Adjust as
necessary, or open the OSD menu, go to the RESET menu and select
the FACTORY RESET option.
The power LED is lit orange.
•
•
Your computer may be in a power management mode. Touch the
pen tip to the Cintiq display screen, move the mouse, or depress any
key on your keyboard.
Turn off both your computer and the Cintiq pen display, and check
the video cable for bent or broken connector pins. Then properly
connect the video cable and turn on Cintiq and your computer.
No display or a “no sync” message
briefly appears on your display
screen.
•
•
Verify that the DVI/VGA switch is properly set. Restart your
computer after changing the position of the switch.
Verify that the video card is properly installed.
No display or a “cable disconnect”
message briefly appears on your
display screen.
•
•
•
Check that your computer is turned on.
Verify that the video cable is properly connected.
Turn off both your computer and the Cintiq pen display, and check
the video cable for bent or broken connector pins. Then properly
reconnect the cables and turn on Cintiq and your computer.
An “invalid mode” message briefly
appears on your display screen.
•
The input signal frequency is incorrectly set or not compatible with
Cintiq. Set the refresh rate (vertical frequency) to 60 Hz (or between
56 and 85 Hz if you are using a resolution of less than 1600 x 1200
pixels). If your video card driver supports adjustment of the
horizontal frequency, make sure it is set to some value between 31
and 92 kHz. On a single monitor system you will need to connect a
different display to change the refresh rate.
•
•
The resolution is set too high (1600 x 1200, maximum).
Set the display properties to detect plug and play monitors.
The image appears multiple times
on the display.
•
Do not extend the video cable. Do not use an input selector
switch box.
When a still image is displayed for
a long period of time without
refreshing the screen, an after-
image remains for a short period of
time.
•
Use a screen saver or other power management feature.
Troubleshooting
Page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Color quality is inaccurate.
•
•
•
Open the OSD menu, go to the RESET menu, and select the
FACTORY RESET option.
Be sure the Cintiq color profile has been installed and is selected as
the profile for use with your operating system and applications.
Any changes to the contrast setting should be made in small
increments as changes in contrast may affect color accuracy.
The color white does not display as
white.
•
•
Be sure the Cintiq color profile has been installed and is selected as
the profile for use with your operating system and applications.
Verify also that the display is operating at the factory default settings.
If that is not sufficient, then adjust color as necessary. For details on
color management, refer to your operating system and application
documentation.
•
•
Verify that the video cable and connector are fully connected.
VGA PROBLEMS
The display ripples or flickers.
Press the AUTO adjust button located on the back of the Cintiq
display. Then, if necessary, open the OSD menu and manually
adjust the clock and phase settings.
•
•
Verify that the display adapter or video card matches the
specifications for Cintiq.
Adjust the refresh rate in the Display Properties control panel.
The display is not clear. Text or
other portions of the screen
appear blurred.
•
•
•
Set the display resolution of your video card to 1600 x 1200.
Turn off the Cintiq, then turn it back on.
Press the AUTO adjust button located on the back of the Cintiq
display. As necessary, adjust brightness, clock, and phase.
The display and LCD panel are not
lined up. The display size is not
correct.
•
•
Press the AUTO adjust button located on the back of the Cintiq
display.
Open the OSD menu, and as necessary adjust clock and phase, and
horizontal and vertical position. Note that some video cards may not
show the display in proper sizing.
The display ripples or shows a
moiré pattern. The display color is
not even.
•
•
Press the AUTO adjust button located on the back of the Cintiq
display. If this does not solve the problem, go to the RESET menu
and select the FACTORY RESET option to set the display back to the
factory default settings.
Open the OSD menu, and as necessary adjust clock and phase.
Troubleshooting
Page 46
Download from Www.Somanuals.com. All Manuals Search And Download.
PEN TABLET TROUBLESHOOTING
If you encounter problems with the Cintiq pen display, refer to the following tables. Your problem may be
described here, and you can try the solution offered. Be sure you refer to the Cintiq Read Me file for the
latest information.
GENERAL PROBLEMS
The computer does not
Check if there is an available USB port on a USB hub. If not
have an available USB port. available, you will need to add a USB hub or USB card.
The pen display power LED Make sure the pen display power switch is turned on.
is off.
Check that the AC power adapter is plugged into both the pen display
and an active power outlet and that the green light on the power
adapter is on.
Use only the power adapter that came with the pen display; other
adapters may cause damage to your product.
The pen works only in
mouse mode, and does
not draw with pressure
sensitivity.
The tablet driver software was not installed or did not load properly.
Make sure the tablet driver software is installed and functioning.
Install the pen tablet driver software in accordance with the
instructions found in the Installation section of this manual.
The pen does not draw with Some applications require that you turn on the pressure capabilities
pressure sensitivity.
Clicking is difficult.
within the application or selected tool before the pen will respond as a
pressure-sensitive tool.
Open the Wacom Tablet control panel and go to the PEN tab.
Try using a lighter TIP FEEL.
The pen selects everything
or will not stop drawing.
Open the Wacom Tablet control panel and go to the PEN tab.
Move the TIP FEEL slider toward FIRM, or select the DETAILS... button
and increase the CLICK THRESHOLD setting. If this does not help, see
Testing Cintiq on page 41.
Double-clicking is difficult.
Be sure you are quickly tapping the display screen twice in the same
place on the pen display tablet’s active area. Wacom recommends
using the side switch to double-click.
Open the Wacom Tablet control panel and go to the PEN tab.
Try increasing the TIP DOUBLE CLICK DISTANCE or using a lighter TIP
FEEL.
Windows: Try setting your system to launch programs with a single
click. See Basic pen operations on page 25.
Troubleshooting
Page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
The eraser selects
everything or will not stop
erasing.
Open the Wacom Tablet control panel and go to the ERASER tab.
Move the ERASER FEEL slider toward FIRM, or select the DETAILS...
button and increase the CLICK THRESHOLD setting. If this does not
help, see Testing Cintiq on page 41.
You notice a delay at the
beginning of pen strokes.
Open the Wacom Tablet control panel and go to the PEN tab.
Try decreasing the TIP DOUBLE CLICK DISTANCE. If that does not
work, try dragging the TIP DOUBLE CLICK DISTANCE slider to the OFF
position in order to turn off double-click assist.
You have to press hard with Open the Wacom Tablet control panel and go to the PEN tab.
the pen when clicking,
drawing, or writing.
Move the TIP FEEL slider toward SOFT, or select the DETAILS... button
and decrease the SENSITIVITY and CLICK THRESHOLD settings.
The pen tip does not
function.
Be sure you are using the pen that originally came with your pen
display tablet, or an Intuos3 pen. Other pens may not function
properly on the Cintiq pen display.
Make sure the status LED lights blue when the pen tip is pressed.
If the LED does not light, verify that the USB cable is plugged into an
active USB port on your computer or on a USB hub.
If the LED still does not light, you may have defective hardware
(see Troubleshooting on page 41).
Open the Wacom Tablet control panel. Check the control panel’s PEN
tab and verify that the tip is assigned to a CLICK function.
Changing the function
Make sure that you change the settings for the tool and application
settings for an input tool has that you are using. See the electronic Software User’s Manual for
no effect.
details on working with multiple tools and with application-specific
settings.
The pen side switch does
not work.
Be sure you are using the pen that originally came with your pen
display tablet, or an Intuos3 pen. Other pens may not function
properly on the Cintiq pen display.
Be sure you press the side switch when the pen tip is within 5 mm
(0.2 inch) of the pen display’s active area – do this without pressing
down on the pen tip.
From the Wacom Tablet control panel, verify that the side switch is set
to the proper function you are expecting to occur for the application
(and input tool) you are using. Verify also that the SIDE SWITCH
EXPERT MODE option is deselected. (This option is accessed by
clicking on the control panel OPTIONS... button.)
Make sure the status LED lights blue when you press the side switch.
If the LED does not light, verify that the USB cable is plugged into an
active USB port on your computer or on a USB hub.
If the LED still does not light, you may have defective hardware
(see Troubleshooting on page 41).
Troubleshooting
Page 48
Download from Www.Somanuals.com. All Manuals Search And Download.
The pen tip and screen
cursor do not properly line
up.
Open the Wacom Tablet control panel and select the CALIBRATE tab.
Continue with Calibrating Cintiq on page 34.
The screen cursor moves
but it does not jump to the
pen tip location when the
Make sure the Wacom tablet driver has loaded properly by opening
the Wacom Tablet control panel. If the driver did not load you will see
an error message. If an error message appears, reboot your
pen is placed on the display computer. If the problem persists, refer to the Installation instructions
screen, and it does not
follow the pen tip when the
pen is moved across the
display.
and reinstall the Wacom tablet software. (For Macintosh, you must
restart your computer after installing the Wacom tablet driver for
proper tablet operation.)
If you have customized the side switch on your pen to toggle between
PEN mode and MOUSE mode, make sure that your pen display is
operating in PEN mode.
When using Cintiq on a
multiple monitor system,
you cannot use the pen to
Set one of the ExpressKeys to DISPLAY TOGGLE, and then press that
key to cycle between pen control for the Cintiq and your other
displays. See the electronic Software User’s Manual for details on
control the other monitor(s). working with DISPLAY TOGGLE.
You can also use your pen to control the other monitors in MOUSE
mode. To use MOUSE mode, first set the pen’s DuoSwitch to MODE
TOGGLE.... Then use the switch to toggle between PEN mode and
MOUSE mode.
The line you are drawing
does not line up with the
location of the screen
cursor.
To function properly, some applications require that the pen is set to
PEN mode. Make sure the pen has not been toggled to MOUSE mode.
If the pen is set to PEN mode and the problem still exists, then you
may have a corrupted preferences file. Follow the instructions in the
next tip to create a new preferences file.
Troubleshooting
Page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
You suspect the pen tablet
preferences may be
corrupted, or want to make
certain that all settings are
at their factory defaults.
Delete the pen tablet preferences as follows:
Windows: Click the START icon and select ALL PROGRAMS.
Then select WACOM TABLET and TABLET PREFERENCE FILE UTILITY.
In the dialog box that appears, click on the REMOVE MY PREFERENCE
FILE button to delete the preferences for the current user. To delete
preferences for multiple users on Windows Vista or XP systems, click
on the REMOVE ALL PREFERENCE FILES button. Note that
administrator rights are required to delete preferences for all users.
Relaunch any currently open tablet-aware applications that you may
be running.
Macintosh: For a single user, delete the tablet preferences by first
choosing your HOME folder from the GO menu. Then open your home
LIBRARY folder. Within your home LIBRARY folder, open the
PREFERENCES folder and delete the COM.WACOM.WACOMTABLET.PREFS
file. Log out, then log back in. When the tablet driver loads, it will
create a new preferences file with the factory defaults.
For multiple users, delete all tablet preferences by first opening the
main APPLICATIONS folder. Then open the WACOM TABLET folder and
run the REMOVE WACOM TABLET utility. When the utility starts, click on
the REMOVE ALL PREFERENCE FILES button. The tablet driver will be
restarted, creating new preferences files with the factory defaults.
Recalibrate the tablet.
Note: Do not manually remove the WACOM TABLET.PREFPANE file from
the main LIBRARY PREFERENCEPANES folder. This file is only to be
removed when uninstalling the tablet software driver, and then only when
using the REMOVE WACOM TABLET utility
The screen cursor moves
erratically or jumps around
on the display screen when
another tablet is connected
to your computer.
The tablet portion of Cintiq emits electromagnetic waves at a certain
frequency. If another tablet is too closely placed to Cintiq it may
interfere with screen cursor positioning. If this occurs, move the
tablet further away from Cintiq.
WINDOWS-SPECIFIC PROBLEMS
After changing right- and
left-handed settings in the
computer’s mouse control
panel, the pen tip no longer
functions properly.
Restart Windows for your Wacom tool settings to be correctly
recognized.
Troubleshooting
Page 50
Download from Www.Somanuals.com. All Manuals Search And Download.
MACINTOSH-SPECIFIC PROBLEMS
At startup, a dialog box
appears telling you that
either the driver failed to
load or the tablet
preferences have not yet
been created.
The pen display tablet was not detected at startup. Check that the
USB interface cable is securely connected to a USB port on your
computer or to a USB hub. Make sure that Cintiq’s power light is on
and is glowing blue. If this does not correct the problem, see
Troubleshooting on page 41.
From the GO menu, select the UTILITIES folder and launch the SYSTEM
PROFILER. Select USB from the HARDWARE section of the CONTENTS
list. A Wacom USB pen display model should be listed. If a pen
display model is not listed, check the pen display’s USB cable
connection or try plugging the pen display into a different USB port.
If this does not help, contact Wacom for Technical Support.
See Technical support options on page 52.
Inkwell does not work
correctly with Cintiq.
There may be a problem with the Inkwell preferences. Remove the
damaged preference files as follows. They will be recreated when
you enable handwriting recognition.
1. From the Apple menu, choose SYSTEM PREFERENCES. From the
System Preferences menu, choose SHOW ALL and select INK.
Then turn off handwriting recognition.
2. From the GO menu, choose your HOME. Open the LIBRARY and
PREFERENCES folders. Then remove the following preferences:
•
•
•
com.apple.ink.framework.plist
com.apple.ink.inkpad.plist
com.apple.ink.inkpad.sketch
3. Go back to SYSTEM PREFERENCES and INK, and then enable
handwriting recognition.
4. Test the Inkwell function using your Wacom pen display tablet
and pen.
5. If this procedure does not resolve your problem with Inkwell,
contact Apple Support for further assistance. Wacom is not the
software manufacturer for Inkwell and we are limited in our
abilities to support a third-party software application.
Troubleshooting
Page 51
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SUPPORT OPTIONS
If you have a problem with your Cintiq pen display, first check the Installation section in this guide to
make sure the unit is installed correctly. Then review the Troubleshooting procedures.
If you cannot find the answer in this guide, you may find updated information about your problem in the
appropriate Read Me file for your platform (located on the Wacom Pen Tablet Driver CD). You can also
check the product FAQs (Frequently Asked Questions) on the Wacom web site for your region.
If you have an Internet connection you can download the latest software drivers from the Wacom web
site for your region. See Obtaining driver downloads on page 53.
If you cannot solve the problem and you think your Wacom product is not working properly, contact the
Wacom support staff for the area where your product was purchased. See the Wacom tablet Read Me
file, located on the Wacom Pen Tablet Driver CD, for contact information.
When you call, you should be at your computer with the following information available:
•
•
This manual.
Pen display tablet serial number. (See the label on the back of the unit. You may have to rotate the
unit in order to see the serial number label.)
•
Driver version number. (See the Wacom Pen Tablet Driver CD or click on the Wacom Tablet control
panel ABOUT button.)
•
•
•
•
•
•
•
The make and model of your computer, and operating system version number.
The make, model, and connection type of your video card.
A list of peripheral devices attached to your computer.
The software application and version you were using when the problem occurred.
The exact wording of any error message that appeared on your screen.
What happened and what you were doing when the problem occurred.
How you tried to solve the problem.
Troubleshooting
Page 52
Download from Www.Somanuals.com. All Manuals Search And Download.
OBTAINING DRIVER DOWNLOADS
Wacom periodically updates the pen tablet software driver to maintain compatibility with new products.
If you are having a compatibility problem between your Cintiq pen display and a new hardware or
software product, it may be helpful to download a new Wacom tablet software driver (when available)
from the Internet.
USA, Canada, Central and South America
Worldwide Web:
Driver downloads.
Europe, Middle East and Africa
Worldwide Web:
Software updates.
Software updates.
Anonymous FTP Site:
Japan
Worldwide Web:
Software updates. (Japanese)
Software updates. (English)
Asia Pacific (English)
Worldwide Web:
China
Worldwide Web:
Software updates.
(Simplified Chinese)
Korea
Worldwide Web:
Software updates. (Korean)
Taiwan
Worldwide Web:
Software updates.
(Traditional Chinese)
Troubleshooting
Page 53
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
CARING FOR CINTIQ
Keep the Grip Pen and your Cintiq LCD screen surface clean. Dust and dirt particles can stick to the
pen and cause excessive wear to the display screen surface. Regular cleaning will help to prolong the
life of your LCD screen surface and pen. Keep Cintiq, the Cintiq stand, and the Grip Pen in a clean, dry
place and avoid extremes in temperature. Room temperature is best. Cintiq, the Cintiq stand, and the
Grip Pen are not made to come apart (except where specifically indicated for removal and replacement
of the pen’s DuoSwitch). Taking apart the product will void your warranty.
Important: Take care never to spill liquids onto the pen display or pen. Be especially careful of
getting the display, tablet ExpressKeys, Touch Strips, or pen buttons, tip, and eraser wet – they
contain sensitive electronic parts that will fail if liquids enter them.
CLEANING
To clean the Cintiq casing, the Cintiq display stand, or the Grip Pen, use a soft, damp cloth; you can
also dampen the cloth using a very mild soap diluted with water. Do not use paint thinner, benzine,
alcohol, or other solvents to clean the unit casing or pen.
To clean the display screen, use an anti-static cloth or a slightly damp cloth. When cleaning, apply only
a light amount of pressure to the display screen and do not make the surface wet. Do not use detergent
to clean the display screen; this may damage the coating on the screen. Please note that damage of
this kind is not covered by the manufacturer’s warranty.
Appendix
Page 54
Download from Www.Somanuals.com. All Manuals Search And Download.
REPLACING THE PEN TIP
The pen tip (nib) will wear with normal use. Excessive pressure will cause the nib to wear sooner.
A worn nib may damage the coating on the Cintiq display screen. To avoid this, periodic tip
replacement is recommended.
When the nib gets too short or develops a sharp edge, replace it with one of the extra nibs that came
with the pen.
To remove the old nib:
To insert a new nib:
Clasp it with a Wacom nib removal tool, pair of
tweezers, needle-nosed plier, or similar
instrument and pull the old nib straight out of
the pen.
Slide it straight into the barrel of the pen.
Firmly push the nib until it stops. The new nib
will slide into the correct position.
WARNING
Prevent children from swallowing the pen tip or side switch. The pen tip (nib)
or side switch may accidentally be pulled out if children are biting on them.
Important: When the pen is not in use, place it in the pen stand, the pen holder, or lay it flat on
your desk. To maintain the sensitivity of your pen, do not store the tool in a container where it
will rest on its tip or eraser.
Appendix
Page 55
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL DISPLAY CONFIGURATIONS
After mounting the pen display unit on the Cintiq stand, you can rotate the pen display tablet to a variety
of positions. If you do not plan to rotate the Cintiq and want to fasten it more securely to the stand, you
can install the rotation lock screws as shown below.
To lock Cintiq to the display stand:
•
Rotate the pen display to the standard landscape position (with the power switch located at the top
of the unit).
•
•
Two holes in the stand will line up with two screw holes on the Cintiq unit.
Use a Phillips-head screw driver to insert the lock screws and hand-tighten them.
CAUTION
Avoid placing excess
physical pressure on the
Cintiq stand; doing so
can damage the stand.
Lock screws
Appendix
Page 56
Download from Www.Somanuals.com. All Manuals Search And Download.
USING AN ALTERNATE MOUNT OR STAND
Cintiq can be attached to any mount arm or
stand conforming to the VESA 100 standard.
Mounting screws that are 4 mm wide with a
0.7 mm pitch (M4 Regular), with a screw
clearance depth from 13 – 18 mm are required.
To attach Cintiq to a VESA 100 mounting
platform:
1. Turn off your computer and power off
Cintiq. Then disconnect all cables from
between the unit and your computer.
2. Remove Cintiq from its stand and place it
face down on a flat, soft surface (such as a
cloth spread across a desktop).
3. Remove the bearing hub by unscrewing
the four bearing hub attachment screws.
Then carefully separate the bearing halves
and remove the bearing stopper to free up
the cabling. Take care not to lose the
small bearing stopper found within the
inner groove of one of the hub sections.
Cable cover
plate (removed)
Cable channel
Bearing hub
sections
(removed)
Attachment
screws
Attachment
screws
Bearing stopper
Appendix
Page 57
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Next remove the four attachment screws from the cable cover plate and lift the plate away from the
pen display unit.
5. Place the cable into the cable exit channel. Then reattach the cable cover plate making sure to
use the correct screws for reattachment. (The cable cover plate screws are shorter than the
bearing hub attachment screws.)
6. Using the screws that came with the bearing cover plate, install the cover plate to protect the
interior of the unit from dust particles.
7. Now, using the appropriate VESA mounting screws, firmly attach Cintiq to the alternate mounting
platform.
CAUTION
When attaching Cintiq onto an alternate mounting platform, be
sure to follow all instructions in the documentation supplied by
the platform manufacturer. If improperly installed, the unit
could fall, resulting in damage to the unit or physical injury.
8. Refer to the Installation instructions beginning on page 16 and reattach the cabling to your
computer.
To remove Cintiq from an alternate mounting platform:
1. Turn off your computer and power off Cintiq. Then disconnect all cables from between the unit and
your computer.
2. Remove Cintiq from the alternate mounting platform.
3. Place the pen display unit face down on a flat, soft surface (such as a cloth spread across a
desktop). Remove the bearing cover plate.
4. Remove the cable cover plate and lift the cable out of the cable channel. After freeing up the cable,
replace the cable cover plate.
5. Lay out and study the bearing hub components – you should have two bearing hub sections, a
bearing stopper, and four screws. Locate the bearing stopper within one of the bearing hub
sections. (Either hub section can be used, as they are identical parts.) When correctly placed, the
bearing stopper will shift smoothly from side to side within the stopper groove. The stopper will also
sit flush with the rear hub surface.
Illustrates correct location of bearing
stopper within bearing hub section.
Appendix
Page 58
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Taking care not to dislodge the bearing stopper from the hub section, position the two halves of the
bearing hub together around the pen display tablet cable and over their attachment points.
Proper positioning shows the hub sections
aligned along the horizontal axis of the pen
display tablet.
The section containing the bearing stopper
should be positioned toward the top of the pen
display tablet.
7. Attach the bearing hub sections to the unit making sure to use the correct screws for reattachment.
(The bearing hub screws are longer than the cable cover plate screws.)
Appendix
Page 59
Download from Www.Somanuals.com. All Manuals Search And Download.
PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTA
Microsoft Windows Vista provides extensive support for pen and touch input. When using Cintiq with a
computer running Windows Vista, your experience is enhanced by powerful note taking, handwriting
recognition, fast navigation, and other digital inking options designed to give you quick, intuitive results
with the Wacom pen.
•
Note taking. Use your Wacom pen to jot notes and capture quick sketches in Windows Journal.
Journal simulates a physical notebook, but with the advantages of digital note taking – you can
choose from a variety of pen, marker, and highlighter tools, plus an eraser that is easily activated by
the eraser end of your Wacom pen. Journal also includes a powerful search engine that can even
locate your handwritten content.
•
•
•
Handwriting recognition. Because Windows Vista includes powerful handwriting recognition
capabilities, you can use your Wacom pen to quickly enter handwritten information anywhere the
computer accepts typed input. You can convert your handwritten content to typed text at any time.
Gestures. Use your Wacom pen to make simple gestural movements on the tablet to trigger
customizable actions for navigation, editing, and other functions. To customize your gestures,
select the FLICKS tab in the PEN AND INPUT DEVICES control panel.
Digital Ink in Microsoft Office 2007. Use your Wacom pen to full advantage with the enhanced
digital mark-up and inking tools available in Microsoft Office 2007 applications running on Windows
Vista. Found on the REVIEW tab within applicable applications, these tools provide a consistent set
of inking options. For quick access, you can add specific inking tools to the Quick Access Toolbar
located at the top of each application.
Note that the following workarounds in the pen tablet driver improve drawing performance in Vista:
•
The Vista Pen Flicks and ‘press-and-hold-to-right-click’ features are disabled in graphics
applications using the Wintab API.
•
There is no pressure sensitivity in Journal and other Vista Ink features when both the Flicks and
‘press-and-hold-to-right-click’ features are disabled in the Vista PEN AND INPUT DEVICES control
panel.
Appendix
Page 60
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT THE WINDOWS VISTA TABLET PC INPUT PANEL
The Windows Vista Tablet PC Input Panel enables you to use handwriting or an on-screen keyboard to
directly enter text with your Wacom pen. There are a number of ways to launch the Input Panel:
•
Click on the Input Panel icon which appears when you move the screen cursor into a text entry
area.
•
•
Click on the Input Panel tab, located by default on the left edge of the display screen.
Click on the Tablet PC Input Panel icon located on the Windows taskbar. If the icon is not visible,
right-click on the taskbar, select TOOLBARS, and TABLET PC INPUT PANEL.
To customize the Input Panel:
1. First open the Input Panel and then click on TOOLS in the menu bar.
2. Select OPTIONS to open the Input Panel Options dialog box.
3. Customize the Input Panel settings for the way you like to work.
To learn more about using your Wacom pen in Microsoft Windows Vista and Office 2007, study the
documentation that came with your system and Microsoft Office applications. Be sure to take
advantage of the Windows Vista training tools, including the Tablet PC tutorial, available from Microsoft.
with your Wacom pen in Windows Vista.
Appendix
Page 61
Download from Www.Somanuals.com. All Manuals Search And Download.
UNINSTALLING CINTIQ
Follow the appropriate procedure below to remove the Wacom tablet software and Cintiq pen display
from your system.
Important:When you remove the Wacom tablet software from your system, your Wacom tablet
will no longer operate with full tablet functionality but will continue to function as a mouse
device.
Windows:
1. Click on the Windows START button and open the CONTROL PANEL.
2. In the CONTROL PANEL window for
•
•
•
Windows Vista: click on UNINSTALL A PROGRAM. In the dialog box that appears, choose the
WACOM TABLET option and click on the UNINSTALL button.
Windows XP or XP x64: select ADD OR REMOVE PROGRAMS. In the ADD OR REMOVE PROGRAMS
window, choose WACOM TABLET and click on the REMOVE button.
Windows 2000: double-click on the ADD/REMOVE PROGRAMS icon. In the dialog box that
appears, choose the WACOM TABLET option and click on the ADD/REMOVE... button.
3. Follow the prompts to remove the tablet driver. (If prompted, enter your administrator login name
and password.)
4. When the driver has been removed, shut down your system, power off your computer, and turn off
Cintiq. When your computer and Cintiq are off, disconnect Cintiq from your computer.
Macintosh:
1. From the GO menu, choose APPLICATIONS and open the WACOM TABLET folder.
2. Double-click on the REMOVE WACOM TABLET icon and select the REMOVE TABLET SOFTWARE button.
Enter your administrator login name and password.
3. After the removal is completed, click OK.
4. Shut down your computer and turn off Cintiq. When your computer and Cintiq are off, disconnect
Cintiq from your computer.
Appendix
Page 62
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT SPECIFICATIONS
GENERAL SPECIFICATIONS
Physical dimensions (W x D x H)
Weight
561 x 421 x 61.3 mm (22.10 x 16.59 x 2.41 in), excluding stand
8.7 kg (19.1 lb), excluding stand
10.4 kg (22.9 lb), including stand
Input voltage
12 VDC
Power consumption
54 W or less (12 VDC) in normal operation mode
2 W or less (12 VDC) in suspend or standby modes
1 W or less in off mode
Operating temperature and humidity 5° to 35° C, 20 to 80% RH (non-condensing)
Storage temperature and humidity
-10° to 60° C, 20 to 90% RH (non-condensing)
(maximum storage humidity is 38% at a temperature of 60° C, and
maximum storage temperature is 42° C at a humidity of 90%)
Certification and compliance
FCC part 15 class B, CE, VCCI Class B, EDID 1.3, C-tick, MIC, BSMI,
CCC, The European Union RoHS Directive 2002/95/EC, Industry
Canada Class B
DISPLAY
Display
a-Si TFT active matrix LCD
Screen size
Resolution
21.3 in diagonal, 432 x 324 mm (17.0 x 12.8 in)
1600 x 1200 pixels (UXGA), 1280 x 1024 pixels (SXGA),
1024 x 768 pixels (XGA), 800 x 600 pixels (SGA),
640 x 480 pixels (VGA), others
Synchronization range
60 Hz vertical (for UXGA)
56 to 85 Hz vertical, 31 to 92 kHz horizontal (for resolutions less
than UXGA)
Pixel pitch
0.27 x 0.27 mm (0.011 x 0.011 in)
16.77 million colors (24 bit)
1,920,000
Color depth
Pixels
Response time (refresh rate)
Brightness
20 ms, typical
2
220 cd/m (typical)
Contrast ratio
Plug and Play
LCD quality
550:1
DDC2B, DDC/CI, and other DVI standards
Each Cintiq LCD panel is produced under very stringent quality
standards. Production techniques cannot guarantee an absolutely
perfect TFT display. Wacom does not allow any pixel to be always
white or always black. The Cintiq 21UX display contains 5.76 million
sub-pixels (red, green, or blue dots). A small number of sub-pixels
(13 or less) can be partially on or partially off – this does not mean the
display is defective. In a partially on sub-pixel, 50% or more of the
sub-pixel is always lit. In a partially off sub-pixel, 50% or more of the
sub-pixel is always dark.
Appendix
Page 63
Download from Www.Somanuals.com. All Manuals Search And Download.
PEN TABLET
Reading technology
Active area
Electromagnetic resonance technology
432.0 x 324.0 mm (17.0 x 12.75 in)
0.005 mm/point (5080 lpi)
0.5 mm ( 0.02 in), average
60 degrees
Resolution
Accuracy
Tilt range (all pens)
Reading height
Maximum report rate
ExpressKeys stroke
Touch Strips
5 mm (0.2 in)
145 points/sec.
1 mm (0.04 in), approximately
52 mm (2.0 in) x 12 mm (0.47 in)
1024 levels
Pressure levels
Communication interface
USB
DISPLAY STAND
*Patented
Patent no. 6,874,744
329 x 299 x 165 mm (13.0 x 11.8 x 6.5 in)
1.7 kg (3.7 lb)
Physical dimensions (W x D x H)
Weight
Rotation
180°
Incline
10° to 65° from horizontal
Landscape, lockable
Primary orientation
POWER ADAPTER
Input voltage
100 to 240 VAC, 50/60 Hz
12 VDC, 6.67 A
Output voltage
GRIP PEN (MODEL ZP-501E)
Pressure sensitivity
Eraser tip travel
Physical size (L x D)
Weight
1024 levels (tip and eraser)
1.3 mm (0.05 in), approximately
175.0 x 15.0 mm (6.89 x 0.59 in)
18 g (0.63 oz), approximately
Tip refill types
The Grip Pen comes equipped with
three standard nibs (white) for
general multi-purpose use, a spring-
loaded stroke nib (gray) providing a
brush-like feeling to your work, and
a felt nib (black) that has a higher
friction than the standard nib.
Standard nib, polyacetal (part no. PSI-A007, qty 5)
Stroke nib (part no. PSI-A042, qty 5)
Felt nib (part no. PSI-A043, qty 5)
Appendix
Page 64
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
Airbrush. A true digital airbrush incorporating a pressure-sensitive tip
and eraser, tilt sensitivity, and a fingerwheel that provides an additional
degree of control over the application of digital paint.
ZP-400E
ZP-600
This tool also includes a programmable side switch.
6D Art Pen. This pen provides rotation sensing technology with a
unique chisel-shaped nib that emulates brushes, markers, and
calligraphic pens. Simply by rotating the pen, a drawn line becomes
narrow or broad. When the 6D Art Pen is combined with a software
application supporting its feature set, the pen can produce almost any
type of brush effect or marker stroke.
Classic Pen. This pressure-sensitive pen has the same feature set as
the Cintiq Grip Pen, but with a slimmer profile that does not include a
rubberized grip.
ZP-300E
Replacement nibs
Standard nibs, polyacetal, (white) for Grip Pen (model ZP-501E),
Airbrush (model ZP-400E), or Classic Pen (model ZP-300E)
PSI-A007, qty 5
Stroke nib (gray) for Grip Pen, Airbrush, or Classic Pen.
Stroke nibs are spring-loaded, providing additional tactile feedback
when you are working with the Grip Pen or Airbrush. They are
installed in the same manner as a standard pen nib.
PSI-A042, qty 5
Felt nib, for Grip Pen (model ZP-501E),
Airbrush (model ZP-400E), or Classic Pen (model ZP-300E)
PSI-A043, qty 5
Standard nib, for Art Pen (model ZP-600)
Felt nibs, for Art Pen (model ZP-600)
Pen stand, for Grip Pen and Art Pen
PSI-A052, qty 5
PSI-A051, qty 5
PST-A034
Appendix
Page 65
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING PARTS AND ACCESSORIES
To purchase parts and accessories, refer to the Cintiq Read Me file and see who to call for your region.
You can also do the following:
•
To purchase parts and accessories in the USA or Canada, call 1.888.884.1870 (toll-free) or visit
•
To purchase parts and accessories in Europe, call +49 (0)180.500.03.75 or send an email to
dealer, distributor, or technical support using the appropriate number for your region.
•
To purchase parts and accessories in other countries, please contact your local dealer or
distributor.
Please note that not all parts and accessories are available in all regions.
Appendix
Page 66
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO AND TELEVISION INTERFERENCE
The equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it is not
installed and used properly – that is, in strict accordance with Wacom instructions – it may cause interference with
radio and television reception.
FEDERAL COMMUNICATIONS COMMISSION (FCC) NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
You can determine whether the equipment is causing interference by powering it off. If the interference stops, it
was probably caused by the equipment.
If the equipment does cause interference to radio or television reception, you may be able to correct the
interference by using one or more of the following measures:
•
•
•
Rotate the television or radio antenna until the interference stops.
Move the equipment farther away from the television or radio.
Plug the equipment and computer into an outlet that is on a different circuit from the television or radio.
If necessary, consult your Wacom dealer or an experienced radio/television technician for help.
Changes or modifications to this product not authorized by Wacom could void the FCC Certification and negate
your authority to operate the product.
Appendix
Page 67
Download from Www.Somanuals.com. All Manuals Search And Download.
INDUSTRY CANADA (CANADA ONLY)
Industry Canada, Class B
“This Class (B) digital apparatus complies with Canadian ICES-003”
“Cet appareil numerique de la classe (B) est conforme a la norme NMB-003 du Canada.”
CE DECLARATION
The Cintiq 21UX pen display has been tested and found to comply with the following harmonized European Norms:
•
•
•
•
EN 55024: 1998+A1:2001+A2:2003 (electromagnetic immunity)
EN 55022: 1998+A1:2000+A2:2003, Class B (electromagnetic emissions)
EN 61000-3-2: 2000, Class D (electromagnetic emissions)
EN 61000-3-3: 1995+A1:2001 (electromagnetic emissions)
The Wacom power adapters have been tested by their manufacturers and found to comply with the following
harmonized European Norms:
•
•
•
•
•
EN 55024: 1998+A1:2001 (electromagnetic immunity)
EN 55022: 1998+A1:2000, Class B (electromagnetic emissions)
EN 61000-3-2: 2000, Class D (electromagnetic emissions)
EN 61000-3-3: 1995+A1: 2001 (electromagnetic emissions)
EN 60950: 2000 (safety)
Based on the results of these tests, Wacom declares that the above mentioned device conforms to the Directive
2004/108/EC and indicates this conformity by the CE-sign on each device.
The device must be installed and operated always in strict accordance with the instructions given in this manual.
Any changes or modifications to this product that were not specifically authorized by Wacom will invalidate this
declaration.
Appendix
Page 68
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
(WORLDWIDE, EXCEPT FOR EUROPE, AFRICA AND MIDDLE EAST)
LIMITED WARRANTY
Wacom warrants the product, to the original consumer purchaser, except for the Software and consumable items
such as the pen nibs, to be free from defects in materials and workmanship under normal use and service for a
period of two (2) years, from the date of original retail purchase, as evidenced by a copy of the receipt and
registration with Wacom within 30 days of purchase.
The Software is licensed “as is.” Wacom makes no warranty with respect to its quality or performance.
Wacom cannot guarantee you uninterrupted service or the correction of any errors.
Upon discovery of a defect in the product, except in the Software, within the Warranty Period, you should contact
Wacom Technical Support via telephone, email, or fax to obtain an RMA (Return Merchandise Authorization)
number and instructions for shipping the product to a service location designated by Wacom. You should send the
product, shipping charges prepaid, to the designated service location, accompanied by the return authorization
number, your name, address and telephone number, proof of purchase date, and a description of the defect.
Wacom will pay for return shipping by United Parcel Service or by an equivalent service as chosen by Wacom.
Wacom’s sole obligation and entire liability under this warranty shall be, at Wacom’s option, either the repair or
replacement of the defective product or parts thereof of which Wacom is notified during the Warranty Period;
provided, however, that you are responsible for (i) the cost of transportation of the product to the designated
service location and (ii) any loss or damage to the product resulting from such transportation.
Wacom shall have no responsibility to repair or replace the product if the failure of the product has resulted from
accident, abuse, misuse, negligence, or unauthorized modification or repair, or if it has been handled or stored
other than in accordance with Wacom’s storage instructions.
Any descriptions, drawings, specifications, samples, models, bulletins, or similar material, used in connection with
the sale of the product, shall not be construed as an express warranty that the product will conform or comply with
your requirements.
EXCEPT FOR THE LIMITED WARRANTY DESCRIBED ABOVE, THERE ARE NO OTHER WARRANTIES MADE
BY WACOM ON THIS PRODUCT. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY WACOM, ITS
DEALERS, DISTRIBUTORS, AGENTS, OR EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY, AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR
ADVICE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE.
WACOM LIMITS THE DURATION OF ANY LEGALLY IMPLIED WARRANTIES INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, TO THE DURATION OF
WACOM’S EXPRESS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
NEITHER WACOM NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION, PRODUCTION, OR
DELIVERY OF THIS PRODUCT SHALL BE LIABLE FOR ANY DIRECT, CONSEQUENTIAL, OR INCIDENTAL
DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS
OF BUSINESS INFORMATION AND THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE SUCH
PRODUCT, EVEN IF WACOM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
In the event that any of the above limitations are held unenforceable, Wacom’s liability for any damages to you or
any party shall not exceed the purchase price you paid, regardless of the form of any claim.
This Limited Warranty is governed by the laws of the United States of America and the state of Washington.
This Limited Warranty is valid for and only applies to products purchased and used inside the United States (and its
territories or possessions) and Canada.
Appendix
Page 69
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY SERVICE IN THE U.S.A. AND CANADA
To obtain Warranty service within the U.S. or Canada contact:
Wacom Technical Support
Phone: 1.360.896.9833
Fax: 1.360.896.9724
E-mail: [email protected]
WARRANTY SERVICE OUTSIDE OF THE U.S.A. AND CANADA
For products purchased or used outside of the United States and Canada, the warranty period is one (1) year from
the date of original retail purchase. Upon discovery of a defect in the product, except in the Software, within the
Warranty Period you should contact your local dealer or distributor. If an authorized Wacom repair center is not
available in your local country you will be responsible for all transportation costs including duties and taxes to and
from the Wacom repair center. In all other respects the terms of the warranty as set forth above apply to such
sales.
Should you have any questions about this Agreement, or if you desire to contact Wacom for any reason, please
contact in writing:
In North and South America contact:
Wacom Technology Corporation
1311 SE Cardinal Court
Vancouver, Washington 98683
U.S.A.
Appendix
Page 70
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank.
Appendix
Page 71
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank.
Appendix
Page 72
Download from Www.Somanuals.com. All Manuals Search And Download.
Wacom Technology Corporation
Wacom Europe GmbH
1311 SE Cardinal Court
Vancouver, WA 98683
U.S.A.
Europark Fichtenhain A9
47807 Krefeld
Germany
Telephone
Telephone
General: +1.360.896.9833
Fax: +1.360.896.9724
General: +49.(0)2151.3614.0
Fax: +49.(0)2151.3614.111
Wacom Co., Ltd.
Wacom Co., Ltd.
2-510-1 Toyonodai
Asia Pacific Office
Otone-Machi, Kitasaitama-Gun
Saitama, 349-1148
Harmony Tower 18F, 1-32-2 Hon-Cho,
Nakano-Ku, Tokyo 164-0012
Japan
Japan
Telephone
General: +81.3.5309.1513
Fax: +81.3.5309.1514
Wacom China Corporation
Wacom Digital Solutions Co., Ltd.
1108 Block One, Kuntai International Bldg
12 Chao Wai Street, Chao Yang District
Beijing, China 100020
Gangnam Telepia B/D 9th Fl, 662-18
Yeoksam-dong, Gangnam-gu, Seoul, 135-080
Korea
Telephone
Telephone
General: +86.10.5879.0880
Fax: +86.10.5879.0102
General: +82.2.557.3894
Fax: +82.2.557.3895
Wacom Australia Pty. Ltd.
Wacom Singapore Pte. Ltd. (Singapore)
Level 5, 18 Orion Rd,
3 Bishan Place
Lane Cove West NSW 2066, Australia
CPF Bishan Building #06-08
Singapore 579838
Telephone
Telephone
General: +61.2.9422.6700
Fax: +61.2.9420.2272
General: +65.6258.8640
Fax: +65.6258.8697
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Guide & Hardware Manual
for Cintiq 21UX (DTZ-2100D)
Wacom Co., Ltd.
UE-0308 (E)
Download from Www.Somanuals.com. All Manuals Search And Download.
|