D1685 Series User's Guide
You will also find:
What's in the box?
Accessory handset
and charger
D1685 base with
answering system and
Not pictured:
x Rechargeable battery
(BT-1021)
cordless handset
x Battery cover
x AC adapter (PS-0035)
You should
have:
If you purchased
model number:*
D1685
None
D1685-2
1 of each
D1685-11
D1685-12
10 of each
11 of each
Battery
cover
Not pictured:
x Rechargeable battery
(BT-1021)
x Telephone cord
x AC adapter (PS-0035)
* If the model number ends in R, your
package includes a DRX100 range
extender. Refer to the
DRX100 User’s Guide for details.
♦ If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
If You...
Contact Uniden’s...
Phone Number
817-858-2929 or
800-297-1023
have a question or problem
Customer Care Line*
need a replacement part or an
accessory
Parts Department*
800-554-3988
need special assistance due to a
disability
800-874-9314
(voice or TTY)
Accessibility Help Line
*
During regular business hours, Central Standard Time; see our website for detailed
business hours.
© 2010 Uniden America Corp.
Ft. Worth, Texas
Printed in Vietnam
U01UN209BZZ(0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the Telephone Cord
GETTING STARTED
Installing Your Phone
Use the telephone cord to connect
the
jack on the base to a
TEL LINE
standard telephone wall jack.
Charge the Battery
1. Unpack all handsets,
battery
Test the Connection
Talk/
1. Pick up the handset and press
packs, and
Flash
. The handset sounds a dial
battery
tone, and the display shows Talk
– If you don't hear a dial tone or
the display says Check Tel Line,
check the connection between
the base and the phone jack.
.
covers. If
you need to
remove a
cover, press
in on the notch and slide the cover
down and off.
End
2. Make a quick test call. (Press
hang up.)
to
2. Line up the battery connector with
the jack inside the handset; the
connector only fits one way.
3. Push the connector in until it
clicks into place; tug gently on the
wires to make sure the battery is
securely connected.
4. Replace the battery cover and slide
it into place.
5. Use an AC adapter to connect the
power jack on the base to a regular
indoor (120V AC) power outlet.
Connect any chargers the same
way.
– If you keep hearing a dial tone,
change to pulse dialing.
– If there’s a lot of noise, check for
interference (see page 19).
3. Test all handsets the same way. If
you can't get a dial tone, move the
handset closer to the base.
Changing to Pulse Dialing
Your phone uses tone dialing by
default. If your phone company uses
pulse dialing, you need to change
your phone’s dial mode.
MEnu/sElEcT
1. Press
and choose
6. Place a handset in the base with
the display facing forward. If the
display doesn’t light up, reseat the
handset or connect the base to
a different outlet. For 2 or more
handsets, place each handset in a
charger.
Global Setup
.
2. Select Dial Mode then Pulse. You’ll
hear a confirmation tone.
To send DTMF tones during a call
(e.g., for an automated response
system), press to temporarily switch
*
to tone dialing. When you hang up,
the phone automatically returns to
pulse dialing.
# Charge all handsets completely
(about 15 hours) before using.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 3
Getting to Know Your Phone
Parts of the Base
PLAY/STOP
UP
CID
PHONEBOOK
FIND HS/
MENU/
INTERCOM
SELECT
CLEAR
DOWN
DELETE
ANS ON/OFF
REDIAL/
PAUSE
SILENT
MUTE
FLASH
SPEAKER
12-Key dial pad
Key (icon)
What it does
x In standby: page a handset or start an intercom call (see page
FInd hs/
InTErcoM
14).
x During a call: put the call on hold and start a call transfer.
x In standby: open the menu.
x In any menu or list: select the highlighted item.
MEnu/sElEcT
clEar
x While entering text or numbers: delete one character, or press
and hold to delete all the characters.
x In standby or during a call: open the phonebook.
x In the menu: go back to the previous screen.
x When entering text: move the cursor to the left.
x In the first 2 seconds of a message: go to the previous message.
x Anytime after that: restart the current message.
PhonEbook
(
)
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 4
Key (icon)
What it does
x In any menu or list, or while a message is playing: stop the
current operation and exit completely.
x In standby: begin message playback.
PlaY/sToP
x While screening calls: mute Call Screen.
x In standby: increase the ringer volume.
uP
x During a call or while a message is playing: increase the volume.
x In any menu or list: move the cursor up one line.
(
)
x In standby or during a call: open the Caller ID list.
x When entering text: move the cursor to the right.
x While a message is playing: skip to the next message.
cId
x In standby: decrease the ringer volume.
down
x During a call or while a message is playing: decrease the volume.
x In any menu or list: move the cursor down one line.
(
)
x In message playback: delete the current message.
x In standby: delete all messages.
dElETE
ans on/oFF
x In standby: turn the answering system on and off.
x In standby: open the redial list.
x When entering a phone number: insert a 2-second pause.
rEdIal/PausE
sIlEnT
x In standby: press and hold to turn off the ringer on the base and
any registered handset (see page 12).
x During a call: mute the microphone.
x While the phone is ringing: ignore this call (mute the ringer).
MuTE
Flash
x During a call: switch to a waiting call.
x In standby: start a speakerphone call (get a dial tone).
x During speakerphone call: hang up.
sPEakEr
(
)
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 5
Parts of the Handset
UP
PHONEBOOK
MENU/SELECT
SPEAKER
TALK/FLASH
DOWN
END
CID
Twelve-key
dial pad
REDIAL/PAUSE
INTERCOM/CLEAR
MESSAGE/MUTE
Microphone
Charging
contacts
Key (icon)
What it does
x In standby or during a call: open the phonebook.
x In the menu: go back to the previous screen.
x When entering text: move the cursor to the left.
PhonEbook
(
)
sPEakEr
x Switch a normal call to the speakerphone (and back).
(
)
x In standby: start a telephone call (get a dial tone).
x During a call: switch to a waiting call.
Talk/Flash
x In standby: decrease the ringer volume.
x During a call: decrease the volume.
x In any menu or list: move the cursor down one line.
down
(
)
rEdIal/PausE
x In standby: open the redial list.
(
)
x When entering a phone number: insert a 2-second pause.
x In standby: increase the ringer volume.
x During a call: increase the volume.
x In any menu or list: move the cursor up one line.
uP
(
)
x In standby: open the menu.
x In any menu or list: select the highlighted item.
MEnu/sElEcT
x During a call: hang up.
x In any menu or list: exit and go to standby.
End
cId
x In standby or during a call: open the Caller ID list.
x When entering text: move the cursor to the right.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 6
Key (icon)
What it does
x In standby: start an intercom call.
x During a call: put the call on hold and start a call transfer.
x When entering text or numbers: erase the character at the cursor
(press & hold to erase all characters).
InTErcoM/
clEar
x In standby: access your answering system.
x During a call: mute the microphone.
x While the phone is ringing: ignore this call (mute the ringer).
MEssagE/MuTE
(
)
Reading the Display
On the Base
On the Handset
Answering
Current call information
system status
Status
icons
Current
call info
Answering
system
status
Time &
date
Status icons
Time
Date
Icon
What it means
The ringer is turned off and will not ring for new calls.
You have a voice message waiting.
Privacy Mode is on: no other station can join the call.
[Aa] [aA] Enter 1) capital or 2) lower case letters (see page 9).
Handset Only Icons
The signal from the base is 1) strong or 2) weak.
The speakerphone is on.
T-coil mode is on (see page 8).
The battery is 1) full, 2) half charged, 3) getting low or 4) empty.
The handset is using ECO (power save) mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 7
USING THE MENUS
Basic Menu Operation
MENU/SELECT
Press
to open the menu.
♦ The phone exits
the menu after 30
MENU/SELECT
to choose the
current option.
Press
Handset Setup
Ans. Setup
seconds if no keys
are pressed.
Handset Setup
T-coil
Press
PHONEBOOK
PhonEbook
♦ Use
Setup
to
UP
Use and
DOWN
to
during a call to
back out of a menu
without hanging up.
go back a screen
Ringer Tones
Setup
rotate through the
options.
OR
Personal Ring
PLAY/STOP
on the base to exit the menu.
END
press
on the handset or
Menu Functions
Base Setup Menu
Use the Base Setup menu to select the base display language and to turn the
base’s key touch tone on and off.
Handset Setup Menu
You can change these settings separately for each handset.
Menu Option
What it does
Turn on T-coil mode to reduce noise on hearing aids
equipped with a telecoil (T-coil) feature. T-coil mode
shortens talk time, so keep your battery fully charged.
T-coil
Choose this handset's ring tone. As you highlight each ring
tone, the phone plays a sample. When you hear the tone
Ringer Tones
Personal Ring
MEnu/sElEcT
you want, press
.
Turn on personal ring so you can assign a special ring tone
to people in your phonebook. With Caller ID, this handset
uses the assigned tone when the person calls.
Have this handset answer a call when you pick it up from
the cradle (without pressing any buttons).
AutoTalk
Have this handset answer a call when you press any key on
the 12-key dialpad.
Any Key Answer
Banner
Handset Language
Key Touch Tone
Change the name used on the handset's display.
Change the display language.
Have the keypad sound a tone when you press a key.
Ans. Setup Menu
Refer to page 15 for details on setting up your answering system.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 8
Date & Time Menu
This menu sets the clock (if you have Caller ID, the phone sets the date and
cId
time automatically). Enter the date and time; select AM or PM. Use
the cursor past a digit without changing it.
to move
Global Setup Menu
The settings on this menu affect all handsets and the base. Select Dial Mode to
choose between tone or pulse dialing (see page 3). Select VMWI Reset to reset
the Voice Message Waiting Indicator (see page 15).
Register Accy. Menu (Base Only)
Use this setting to put the base in registration mode (see page 20).
Entering Text on Your Phone
♦ Use the 12-key dial pad anytime you want to enter text into your phone (a
name in the phonebook, the handset banner, etc.).
♦ If two letters in a row use the same key, enter the first letter; wait for the
cursor to move to the next space and enter the second letter.
USING YOUR PHONE
From Base
Speakerphone
From Handset
Earpiece Speakerphone
To...
make a call, dial
sPEakEr.
Talk/Flash
sPEakEr
Press
Press
Press
Press
.
Press
.
the number, then
sPEakEr
Talk/Flash
sPEakEr
answer a call
.
Press
Press
.
Press
.
End
or place the handset in the
sPEakEr
hang up
.
cradle.
MuTE
phone is ringing
MEssagE/MuTE
while the phone is
ignore a call/mute Press
while the
Press
the ringer
ringing.
Switch to the
Speaker and back
sPEakEr
NA
Press
.
MEssagE/MuTE
MuTE.
(Press
Press
.
mute the
microphone
during a call
Press
again to turn the
(Press again to turn the microphone
back on).
microphone back on.)
FInd hs/
InTErcoM*.
Press
InTErcoM/clEar*
put a call on hold
Press
Press
.
return to a call on
hold
sPEakEr
Talk/Flash
sPEakEr
Press .
Press
.
.
*
Aſter 5 minutes on hold, the call will be disconnected.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 9
Changing the Volume
To change the...
When...
Press...
earpiece or speaker volume
for each handset
base speaker volume
ringer volume for each
handset or the base*
you are listening to that earpiece
or speaker (playing messages,
etc.)
uP
to increase
the volume.
down
to
decrease it.
the phone is in standby
*
If you turn the ringer all the way down, that particular ringer turns off.
Using the Caller ID and Redial Lists
Caller ID (CID) is a service available from your telephone provider that shows
the phone number (and sometimes the caller’s name) of incoming calls.
Contact your telephone provider for more information.
Caller ID list
Redial list
x The phone saves the information for the last 50 received x Each station
calls to the CID list. The NEW icon marks any calls
remembers the
last 5 numbers you
dialed on it.
x Only one station
can access its redial
list at a time.
received since the last time you checked the list.
x All stations share the same CID list so only one station
can access the list at a time.
x In standby, stations show how many calls came in since
the last time you checked the CID list.
To…
Press...
cId
rEdIal/PausE
to open the CID list or
to open the Redial list.
open the lists
down
uP
to scroll from newest to oldest.
to scroll from oldest to newest.
scroll through
the lists
Talk/Flash sPEakEr
or
sPEakEr
.
on the handset. On the base, press
dial the
highlighted
number
(CID record only) If the number is a toll call without 1 at the
beginning of the record, press * to add 1 before dialing.
PhonEbook
close the lists
.
MEnu/sElEcT
For individual record options, highlight a number and press
:
Menu Option What it does
Delete Entry
Store Into Pb
Delete All
Erase the number from the list.
Add the number to the phonebook. The station prompts you to
edit the name & number and select a personal ring.
Erase all numbers from the list.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 10
Using Call Waiting
♦ Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
♦ If you get a Call Waiting call, the phone sounds a tone and displays any
Flash
CID information received from the waiting call. Press
on the base or
Talk/Flash
on the handset to switch between the current call and the waiting
call; each time you switch, there is a short pause before you're connected to
the other call.
Using the Phonebook
The phone can store up to 100 entries in its phonebook. All stations share the
same phonebook, so only one station can access it at a time.
To...
Press...
PhonEbook
open/close the phonebook
.
down
uP
to scroll through the entries from A to Z.
to scroll from Z to A.
scroll through the entries
jump to entries that start with the number key corresponding to the letter you
a certain letter
want.
Talk/Flash sPEakEr
or
On the base, press
on the handset.
sPEakEr
dial the current entry
edit the current entry
delete the current entry
.
MEnu/sElEcT
, then select Edit
.
MEnu/sElEcT
prompts you to confirm, select Yes
, then select Delete. When the phone
.
Adding Phonebook Entries
1. With the phone in standby, open the phonebook.
MEnu/sElEcT
2. Press
and select Create New.
MEnu/sElEcT
3. The screen displays Edit Name. Enter the name and press
.
4. The screen displays Edit Number. Enter the phone number (up to 20 digits)
MEnu/sElEcT
exactly as you would dial it. Press
.
If you need the phone to wait before sending the next set of digits, press
rEdIal/PausE
to insert a 2-second pause. You can insert multiple pauses, but
each one counts as a digit (you’ll see in the display).
P
# If you are adding entries from a cordless handset, you will be
prompted to select a personal ring for that entry.
Deleting All the Phonebook Entries
1. With the phone in standby, open the phonebook.
MEnu/sElEcT
2. Press
and select Delete All.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 11
3. When the screen prompts you to confirm, select Yes
.
USING SPECIAL FEATURES
Silent Mode
You can silence the ringers on the base and all handsets for a specific period of
time (1 to 9 hours) or set the ringers to be off all the time; the answering system
answers any incoming calls without playing anything through the speaker.
sIlEnT
1. With the phone in standby, press and hold
on any handset or on the
or Always
base. The phone prompts you to select the number of hours (
1
-
9
On) that you want it to stay in silent mode.
sIlEnT
2. To confirm, press
or just wait about 5 seconds. The phone turns on
the answering system and displays Silent Mode On
.
3. After the selected number of hours, the phone automatically exits silent
sIlEnT
mode. To exit silent mode manually, press and hold
again.
# If the phone is in silent mode and you turn off the answering system,
the phone exits silent mode.
Multistation Features
# To use the features in this section, you need at least 1 cordless
handset.
♦ Your base supports a total of 12 cordless accessory handsets, including any
that came with your phone.
♦ You must register accessory handsets to the base before using them.
Handsets that aren’t registered display a “not registered” message. For
registration instructions, see page 20, or the accessory handset manual.
Conference Calling
♦ When an outside call comes in, two cordless handsets and the base can join
in a conference call with the outside caller.
Talk/Flash
♦ To join a call that’s already in progress, just press
on the handset
sPEakEr
or
on the base.
♦ To leave the conference call, hang up normally; the other stations remain
connected to the call.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 12
Call Transfer
To...
From the base...
FInd hs/InTcoM
From a cordless handset...
InTErcoM/clEar
to put
1. Press
the call on hold.
to put 1. Press
the call on hold.
2. Select the station you want to transfer the call to, or select
All to page all the stations at the same time.
transfer a call
When the other station accepts the call, you’ll be
disconnected but you can join the call again.
sPEakEr
Press
the call.
Talk/Flash
Press to return to
the call.
to return to
cancel a transfer
1. To answer the page and speak to the transferring station,
FInd hs/InTErcoM
InTErcoM/clEar
.
press
.
press
accept a
transferred call
2. To accept the call,
sPEakEr.
Talk/Flash
press
press
.
Privacy Mode
MEnu/sElEcT
♦ With a call in progress, press
twice to activate Privacy mode. As
long as privacy mode is on, you’ll see a in the display, and no other stations
can join your call.
♦ Privacy mode turns off automatically when you hang up or put the call on
MEnu/sElEcT
hold; you can also turn it off by pressing
twice.
♦ To use privacy mode during a conference call, wait until all stations have
joined the call before turning privacy mode on. If a station disconnects, that
station cannot rejoin the call as long as privacy mode remains on.
Intercom
♦ Whenever the phone is in standby, you can make an intercom call between
stations without using the phone line.
♦ You can make an intercom call from any station, but only two stations can
be in an intercom call at any time.
♦ If an outside call comes in during an intercom page, the phone cancels the
page so you can answer the incoming call.
sPEakEr
♦ If an outside call comes in during an intercom call, press
on the base
Talk/Flash
outside call.
or
on the handset to hang up the intercom call and answer the
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 13
From the base, press...
From a cordless handset,
press...
To...
FInd hs/InTErcoM.
InTErcoM/clEar.
make an
intercom page
Select the station you want to talk with or All to page all
stations at the same time.
FInd hs /InTErcoM
End.
cancel a page
answer a page
.
FInd hs /InTErcoM sPEakEr
or
InTErcoM/clEar Talk/Flash.
.
or
FInd hs/InTErcoM
End.
end an intercom
call
.
Finding a Lost Handset
You can use the intercom to page a lost handset. When the intercom tone
sounds, you can track the tone to the lost handset.
Chain Dialing
If you often have to enter a series of digits or a code number during a call, you
can save that code number as a phonebook entry and use the phonebook to
send the code number.
Setting Up Chain Dialing
Save the code number (up to 20 digits) into the phonebook just like a regular
phonebook entry. Be sure to enter the code number into the phonebook exactly
as you would enter it during a call.
Using Chain Dialing
1. Make your call normally.
2. When you hear the prompt that asks you to enter the code number, open the
phonebook and find the entry that contains it.
MEnu/sElEcT
phonebook.
3. Press
to send the code. If you change your mind, just close the
Voice Message Notification
♦ If you subscribe to a voice mail service, your phone can notify you when you
have a new message. This feature supports Frequency-Shift Keying (FSK)
notification. Contact your voice mail provider for information.
♦ When you have new messages, the display shows a message icon. After you
listen to your messages, the message icon turns off. If it doesn’t, you can
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 14
reset it: With the phone in standby, open the menu and select Global Setup
select VMWI Reset, then select Yes.
;
USING THE ANSWERING SYSTEM
Answering System Options (Ans. Setup
)
You can set or change the answering system options from any station. Just open
the menu and select Ans. Setup. Select one of the menu options:
Menu Option
What it does
Enter a 2-digit PIN so you can access your answering system
from any touch-tone phone (see page 18).
Security Code
Set the number of rings (
2
,
4
, or 6) before the system answers.
If you call in remotely to check your messages, Toll Saver makes
the system answer after 2 rings if you have new messages or
after 4 rings if not.
Ring Time
Set the amount of time (
1
or minutes) callers have to leave a
4
Record Time
message. Choose Announce Only if you don’t want the system
to let callers leave a message.
Have the base beep every 15 seconds when you have a new
message. The alert stops after you listen to all your new
messages or if you press any base key.
Message Alert
Ans. Language
Call Screen
Change the language of the system’s voice prompts.
Turn on the Call Screen feature (see page 17).
Turn your answering system on or off.
Ans. On/Off
ans on/oFF
You can also press
on the base.
Record Greeting Record an outgoing message or greeting (see page 16).
Greeting
Options
Switch greetings or delete your greeting (see below).
Recording the Outgoing Message
Your personal outgoing message or greeting can be from 2 to 30 seconds long.
If you don’t record a greeting, the system uses the pre-recorded greeting: Hello,
no one is available to take your call. Please leave a message after the tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 15
To...
Follow these steps from the base or a handset:
1. Open the menu with the phone in standby. Select Ans. Setup
,
then select Record Greeting
MEnu/sElEcT
.
2. Press
"Record greeting" before speaking.
MEnu/sElEcT
to start recording. Wait until the system says
Record a
personal
greeting
3. Press
to stop recording. The system plays back your
new greeting.
PlaY/sToP
End
4. To keep the greeting, press
on the handset. To re-record it, press
on the base or press
MEnu/sElEcT
.
1. Open the menu with the phone in standby. Select Ans. Setup
then Greeting Options
2. The system plays back the current greeting. Press
switch greetings.
,
Switch
between
greetings
.
MEnu/sElEcT
to
dElETE
Delete your
greeting
Switch to your personal greeting; press
on the base or
on the handset while the greeting is playing.
InTErcoM/clEar
Accessing the Answering System
MESSAGE/MUTE
mote operation mode.
Press
to start
With the phone in standby,
you can access the system
from the base or remotely
PHONEBOOK
go back to the
previous option:
CID
to go to
Use
to
Use
5:Stop
the next option:
from any handset:
[ / /select]
♦ Only 1 station can access
the system at a time.
4:Delete
3:Skip
1:Repeat
MENU/SELECT
Press
♦ During remote access:
– If you do nothing for
30 seconds, the phone
returns to standby.
to choose the
current option
OR
2:Play
END
to exit remote
operation mode.
– The phone beeps so you
know it's waiting for the next command.
– You can press the number key shown next to each command instead of
scrolling through the screens.
Getting Your Messages
To...
From the base
PlaY/sToP.
From a handset
MEssagE/MuTE
.
Press
Press
play new
messages
The system announces the number of new & old messages,
then plays each new message (followed by the day and time if
set) in the order it was received.
restart this
message
Wait 5 seconds after the message begins, then
PhonEbook.
press
select 1:Repeat.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 16
To...
From the base
During the first 2 seconds of a message,
PhonEbook.
From a handset
replay an earlier
message
press
select 1:Repeat
Select 3:Skip
While a message is playing,
.
cId
.
skip a message Press
.
delete a
message
press
dElETE
.
select 4:Delete.
delete all
messages
With the phone in standby, press
Not available.
dElETE
dElETE
again to confirm.
; press
play old
After the system plays all new messages,
PlaY/sToP
messages
press
Press
again.
select 2:Play
.
PlaY/sToP
stop playback
.
Select 5:Stop.
Screening Your Calls
You can use the answering system for call screening. While the system takes a
message, you can listen on the base speaker (if you turn on Call Screen) or from
a handset. Only one handset can screen calls at a time. If another handset tries
to screen calls, it beeps and returns to standby.
To...
From the base
From a handset
hear the caller leaving a
message
Listen to the caller over
the speaker.
MEssagE/MuTE
Press
.
sPEakEr
Talk/Flash
.
answer the call
mute the call screen
without answering*
Press
.
Press
Press
End
or return the
PlaY/sToP
Press
.
handset to the cradle.
*
If you mute the call screen, the system continues taking the message: it just stops
playing through the speaker.
Using the System While You're Away from Home
You can dial in to your answering system from any touch-tone phone. Before
you can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select Ans. Setup, then select
Security Code. Use the number keypad to enter a two-digit security code (01 to
MEnu/sElEcT
99). Press
when you’re finished.
# Remember to make a note of your new security code!
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system is
turned off, it answers after 10 rings & sounds a series of beeps.)
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 17
0
2. During the greeting or beeps, press and immediately enter your security
code. If you enter it incorrectly 3 times, the system hangs up and returns to
standby.
01 Repeat message
3. The system announces the time, number of
02 Play message
messages in memory, and a help prompt. It
beeps to indicate it's waiting for a command.
03 Skip message
4. When you hear beeping, enter a 2-digit
command from the chart. Enter both digits
within 2 seconds or the entry times out.
# If you don't press any keys for 15 seconds,
the system hangs up and returns to
standby.
04 Delete message
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts
IMPORTANT INFORMATION
Solving Problems
If you have any trouble with your phone, check this section first. If you need
help, call our Customer Care Line listed on the front cover.
General problems
Possible solutions
x Check the telephone cord connection.
x Disconnect the base AC adapter for a few
minutes; then reconnect it.
No stations can make or
receive calls.
A handset can’t make or
receive calls.
x Move the handset closer to the base.
x Make sure the ringer is turned on.
x Make sure Silent Mode is turned off (see page 12).
A station can make calls,
but it won’t ring.
x Charge the battery for 15-20 hours.
x Check the battery connection.
A handset is not working.
The phone keeps ringing
when I answer on an
extension.
x You may have to change the line mode. Contact
Customer Service for instructions.
Audio issues
Possible solutions
x Move the handset closer to the base or Range Extender.
x Keep the handset’s battery fully charged.
x Increase the earpiece volume.
Callers sound
weak or soft.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 18
Audio issues
Possible solutions
x Check for interference from appliances (microwave
ovens, TVs, etc.) or wireless devices (baby monitors, WiFi
equipment, etc.). Move the handset or base away from the
interference source.
x If you use a telecoil hearing aid, turn on T-coil mode (see
page 8).
There’s a lot of
noise or static on
the line
x If you have any service that uses the phone line, add a DSL
or telephone line filter (see page 20).
Caller ID problems
Possible solutions
x Let calls ring twice before answering.
x Make sure your Caller ID service is active.
Caller ID information does
not display.
Caller ID displays briefly
and then clears.
x You may have to change the line mode. Contact
Customer Service for instructions.
Multistation problems
Possible solutions
I can’t transfer calls.
x Reset all the stations (see page 20).
Two handsets can’t talk to a caller. x See if any station is in Privacy Mode.
x Move the handset closer to the base.
x See if any station is in Privacy Mode.
A handset says Unavailable
.
x Reset the handset (see page 20).
x See if you have 12 registered handsets.
I can’t register a new handset.
Answering system problems
Possible solutions
x Make sure the answering system is on.
x Make sure the base is plugged in.
The answering system does not
work.
x See if Record Time is set to Announce Only
x Delete messages (memory may be full).
.
The system won't record
messages.
x See if another handset is using the system.
x Make sure the phone is in standby.
A handset can't access the
answering system.
x If there was a power failure, re-record your
My outgoing message is gone.
I can’t hear the base speaker.
Messages are incomplete.
personal outgoing message.
x Make sure call screening is turned on.
x Change the base speaker volume.
x Increase the Record Time
.
x Delete messages (memory may be full).
The system keeps recording when x You may have to change the line mode.
I answer on an extension.
Contact Customer Service for instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 19
Installing a Line Filter or DSL Filter
A telephone line filter or DSL filter prevents services that use the phone line
from causing interference on your phone. To get a line filter, contact your
service provider or look in an electronics store.
Plug the filter into the telephone wall jack and plug the base into the filter.
Make a test call to make sure the noise is gone.
Liquid Damage
CAUTION: If the base is covered in liquid, disconnect the adapter &
phone cord from the wall before touching it.
If the liquid is only on the exterior housing of the base or handset, wipe it off
and use as normal. If you can hear liquid inside the housing:
1. Remove all compartment covers, and disconnect all cables and cords.
2. If liquid is leaking from any vent or hole, turn the phone so that the vent
faces down. If not, place the largest vent face down.
3. Let dry for at least 3 days. Check for liquid inside the phone before replacing
compartment covers & reconnecting cords.
Resetting Stations
Unplug the base to reset it. Plug it back in after at least a minute.
If you have trouble with a handset or if you want to replace one, reset it.
End
#
1. Press & hold
and at the same time until you see the System Reset menu.
2. If you still have the base the handset is registered to, select Deregister
HS, then select the handset you want to reset. If you don’t have that base
anymore, select Base Unavailable
.
3. To confirm, select Yes. The handset displays Handset not registered
.
Registering Handsets
If you see Not Registered on a handset, you must register it to a base before use.
1. Place the handset in the base; the display should say Registering. If the
handset does not fit in the base, open the base menu and select Register Accy
.
#
On the handset, press and hold until Registering displays.
2. Wait until the display says Registration Complete (about 30 seconds), then
Talk/Flash
pick up the handset and press
.
# If you don’t hear a dial tone or the display says Registration Failed
,
charge the battery completely, then try again.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 20
batteries within the
Adapter and Battery Infor-
mation
United States. Please
call 1-800-8-BATTERY
for information on Ni-
AC Adapter (Base and Charger)
MH battery recycling in
your area. (RBRC® is a
Part number
Input voltage
Output voltage
PS-0035
120V AC, 60 Hz
8V AC @ 300mA
registered trademark of the Rechargeable
Battery Recycling Corporation.)
Rechargeable batteries must be
recycled or disposed of properly.
x Use only the supplied AC adapters.
x Use the proper adapter for the base & any
chargers.
x Do not place the unit in direct sunlight or
subject it to high temperatures.
Warning! The cords on this product
and/or accessories contain lead,
a chemical known to the state of
California to cause birth defects
or other reproductive harm. Wash
hands after handling.
Battery pack (with normal use)
Part number
Capacity
Talk time
Standby time
Battery life
BT-1021
Uniden works to reduce lead
content in our products &
accessories.
300mAh, 2.4V DC
about 7 hours
about 7 days
about 1 year
Compliance Information
x Replace the battery when the talk or
standby time becomes noticeably reduced.
For replacements, call the Parts Depart-
ment (see the front cover).
x When the battery gets low, the handset
beeps and shows a low battery alert;
recharge the battery.
Rechargeable Battery Warning
x is equipment contains a rechargeable
Nickel-Metal-Hydride (Ni-MH) battery.
x Nickel is a chemical known to the state of
California to cause cancer.
x Do not short-circuit the battery.
x e batteries in this equipment may
explode if disposed of in a fire.
FCC Part 68 Information
is equipment complies with Part 68 of
the FCC rules and the requirements ad-
opted by the ACTA. On the bottom of this
equipment is a label that contains, among
other information, a product identifier
in the format US: AAAEQ##TXXXX. If
requested, this number must be provided
to the phone company.
An applicable Universal Service Order
Codes (USOC) certification for the jacks
used in this equipment is provided (i.e.,
RJ11C) in the packaging with each piece
of approved terminal equipment. A plug
and jack used to connect this equipment
to the premises wiring and telephone
network must comply with the applicable
FCC Part 68 rules and requirements
adopted by the ACTA. A compliant tele-
phone cord and modular plug is provided
with this product. It is designed to be
connected to a compatible modular jack
that is also compliant. See installation
instructions for details.
x Do not charge the batteries in any charger
other than the one specified in the owner's
manual. Using another charger may dam-
age the battery or cause it to explode.
x As part of our commitment to protecting
our environment and conserving natural
resources, Uniden voluntarily participates
in an RBRC® industry
program to collect and
recycle used Ni-MH
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 21
e REN is used to determine the
request that you disconnect the equip-
ment until the problem is resolved.
number of devices that may be con-
nected to a phone line. Excessive RENs
on a phone line may result in devices
not ringing in response to an incoming
call. In most but not all areas, the sum
of RENs should not exceed five (5.0). To
be certain of the number of devices that
may be connected to a line, as determined
by the total RENs, contact the telephone
provider. e REN for this product is
part of the product identifier that has the
format US:AAAEQ##TXXXX. e digits
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
If your home has wired alarm equipment
connected to a phone line, be sure that
installing the system does not disable your
alarm equipment. If you have questions
about what will disable alarm equipment,
contact your telephone company or a
qualified installer.
Any changes or modifications to this
product not expressly approved by the
manufacturer or other party responsible
for compliance could void your authority
to operate this product.
NOTICE: According to telephone com-
pany reports, AC electrical surges, typi-
cally resulting from lightning strikes, are
very destructive to telephone equipment
connected to AC power sources. To mini-
mize damage from these types of surges,
a surge arrestor is recommended.
If this equipment causes harm to the tele-
phone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be
required. But if advance notice isn't prac-
tical, the telephone company will notify
the customer as soon as possible. Also,
you will be advised of your right to file a
complaint with the FCC if you believe it
is necessary. e telephone company may
make changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment.
If this happens the telephone company
will provide advance notice in order for
you to make necessary modifications to
maintain uninterrupted service.
FCC Part 15 Information
is device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) is device
may not cause harmful interference, and
(2) is device must accept any interfer-
ence received, including interference that
may cause undesired operation. Privacy
of communications may not be ensured
when using this phone.
Please follow instructions for repairing,
if any (e.g. battery replacement section);
otherwise do not substitute or repair any
parts of the device except as specified in
this manual. Connection to party line
service is subject to state tariffs. Contact
the state public utility commission, public
service commission or corporation com-
mission for information. is equipment
is hearing aid compatible.
If you experience trouble with this equip-
ment, contact the manufacturer (see the
cover of this manual for contact informa-
tion) or an authorized agent. If the equip-
ment is causing harm to the telephone
network, the telephone company may
FCC PART 15.105(b): Note: is
equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to part 15 of the
FCC Rules. ese limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. is equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equip-
ment does cause harmful interference to
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 22
radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or more
of the following measures:
of Conformity indicating that Industry
Canada technical specifications were met.
It does not imply that Industry Canada
approved the equipment.
NOTICE: e Ringer Equivalence Num-
ber (REN) for this terminal equipment is
marked on the equipment itself. e REN
assigned to each terminal equipment
provides an indication of the maximum
number of terminals allowed to be
connected to a telephone interface. e
termination on an interface may consist
of any combination of devices subject
only to the requirement that the sum of
the Ringer Equivalence Numbers of all
the devices does not exceed 5.
x Reorient or relocate the receiving
antenna.
x Increase the separation between the
equipment and receiver.
x Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
x Consult the dealer or an experienced
radio/TV technician for help.
FCC RF Exposure Information
is product complies with FCC radia-
tion exposure limits under the following
conditions:
x e base must be placed to allow a
minimum of 20 cm (8 inches) between the
antenna and all persons during normal
operation.
x e base must not be collocated or
operated in conjunction with any other
antenna or transmitter.
x e handset is designed for body-worn
operation and meets FCC RF exposure
guidelines when used with any belt clip,
carrying case, or other accessory supplied
with this product. (All necessary acces-
sories are included in the package; any
additional or optional accessories are not
required for compliance with the guide-
lines.) ird party accessories (unless
approved by the manufacturer) should be
avoided as these might not comply with
FCC RF exposure guidelines.
Radio equipment
e term IC before the radio certifica-
tion number only signifies that Industry
Canada technical specifications were
met. Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device. "Privacy of com-
munications may not be ensured when
using this telephone".
1-Year Limited Warranty
Evidence of original purchase is
required for warranty service.
WARRANTOR: UNIDEN AMERICA
CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden
warrants, for one year, to the original
retail owner, this Uniden Product to
be free from defects in materials and
craſtsmanship with only the limitations
or exclusions set out below.
Industry Canada (I.C.) Notice
Terminal equipment
NOTICE: is equipment meets the
applicable Industry Canada Terminal
Equipment Technical Specifications. is
is confirmed by the registration number.
e abbreviation IC before the registra-
tion number signifies that registration
was performed based on a Declaration
WARRANTY DURATION: is war-
ranty to the original user shall terminate
and be of no further effect 12 months
aſter the date of original retail sale. e
warranty is invalid if the Product is (A)
damaged or not maintained as reasonable
or necessary, (B) modified, altered, or
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 23
used as part of any conversion kits, subas-
semblies, or any configurations not sold
by Uniden, (C) improperly installed, (D)
serviced or repaired by someone other
than an authorized Uniden service center
for a defect or malfunction covered by
this warranty, (E) used in any conjunc-
tion with equipment or parts or as part of
any system not manufactured by Uniden,
or (F) installed or programmed by any-
one other than as detailed by the owner's
manual for this product.
to state. is warranty is void outside the
United States of America and Canada.
PROCEDURE FOR OBTAINING PER-
FORMANCE OF WARRANTY: If, aſter
following the instructions in the owner's
manual you are certain that the Product
is defective, pack the Product carefully
(preferably in its original packaging).
Disconnect the battery from the Product
and separately secure the battery in its
own separate packaging within the ship-
ping carton. e Product should include
all parts and accessories originally pack-
aged with the Product. Include evidence
of original purchase and a note describ-
ing the defect that has caused you to
return it. e Product should be shipped
freight prepaid, by traceable means, to
warrantor at:
STATEMENT OF REMEDY: In the event
that the product does not conform to this
warranty at any time while this warranty
is in effect, warrantor will either, at its op-
tion, repair or replace the defective unit
and return it to you without charge for
parts, service, or any other cost (except
shipping and handling) incurred by war-
rantor or its representatives in connection
with the performance of this warranty.
Warrantor, at its option, may replace the
unit with a new or refurbished unit. THE
LIMITED WARRANTY SET FORTH
ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE
PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRAN-
TIES OF ANY NATURE WHATSO-
EVER, WHETHER EXPRESS, IMPLIED
OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED
TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSE-
MENT OR PAYMENT OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES.
Some states do not allow this exclusion or
limitation of incidental or consequential
damages so the above limitation or exclu-
sion may not apply to you.
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
As an Energy Star
®
Partner,
Uniden has determined that
this product meets the
Energy Star guidelines for
®
energy efficiency. Energy
Star is a U.S. registered mark.
®
x Uniden is a registered trademark of
®
Uniden America Corporation.
x e pictures in this manual are for
example only. Your phone may not look
exactly like the pictures.
LEGAL REMEDIES: is warranty gives
you specific legal rights, and you may also
have other rights which vary from state
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 24
|