Tripp Lite Network Card U209 000 R User Manual

Tripp Lite World Headquarters  
1111 W. 35th Street, Chicago, IL 60609 USA  
USER’S MANUAL  
USB to Serial Adapter  
Model #: U209-000-R  
NOTE: Follow these installation and operating procedures to ensure correct  
performance and to prevent damage to this unit or to its connected devices.  
Copyright © 2002 Tripp Lite. All rights reserved. All trademarks are the property of  
their respective owners. Technical specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Uninstalling the Driver  
1. Open the system folder:  
(My Computer -> Control Panel -> System)  
2. Click on the Device Manager tab.  
3. Click on the plus sign in front of Universal Serial Bus Controllers  
heading to see the Universal Serial Bus Controller listing.  
4. Select USB to Serial Cable.  
5. Click the Remove button.  
Peripheral Installation  
1. With the USB to Serial Adapter already installed, plug the peripheral  
into the adapter and then turn the peripheral on.  
2. Follow the Installation Wizard’s on-screen instructions to complete  
the installation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Read if Experiencing Installation Problems  
When Using a Tripp Lite USB to Serial Adapter  
(U209-000-R) on a Laptop/Notebook PC.  
The following procedure may be required if you have a laptop that does  
not have a hardwired native serial port. On this type of unit, the  
manufacturer may have eliminated the serial chipset on the motherboard  
thereby disabling the USB adapter’s port emulation feature. If this is the  
cause of your problem, the following procedure will resolve this issue.  
Please follow the instructions in their entirety.  
Creating a Virtual Com Port on Your Laptop/  
Notebook:  
1. Open Add New Hardware (Start - Settings - Control Panels -  
Add New Hardware).  
2. Add New Hardware Wizard Introduction screen will appear.  
Click “Next”.  
3. Computer will search for connected devices. Either a prompt will  
appear asking you to select a device from a list or it will ask you if  
you want to search for new devices. If asked to select from a list,  
click “No” and then “Next”. If not prompted, simply click “Next”. If  
prompted to select from a list, the next screen will ask if you want to  
search for new drivers. Click “Next”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. The following screen will alert you to the fact it will now search for  
new devices. Click “Next”. (Note: This may take several minutes  
depending on your system. The screen may go black for a few  
seconds. This is normal.)  
5. When done, select “Next”.  
6. A list of device types will appear. Scroll down to:  
Ports (Com & LPT). Click “Next”.  
7. A two-paned list will appear. On left under Manufacturers, select  
“Standard Port Types”. On the right under Models, select  
“Communications Port”. Click “Next”.  
8. You will be prompted to set up the properties and settings of the Com  
Port. Leave values as defaults. Click “Next”.  
9. When completed, select “Next”.  
10. You will be prompted to restart. Click “Yes”.  
11. After restart, reinstall the USB-Serial Adapter onto the Virtual Com Port.  
If Your Computer Does Not Boot Up After You  
Install Your Com Port, do the Following:  
1. Disconnect the USB-Serial Adapter. Boot your machine in Safe  
Mode. (To do this, press “F8” when you first boot up. Press it  
repeatedly until you get a selection screen, choose “Safe Mode”).  
2. After boot up, go into your device manager and select the Com Port.  
3. Click “Remove”. Follow the prompts and restart as normal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the USB to Serial Adapter’s Driver*:  
* May vary slightly depending upon installed O/S version.  
1. Open Device Manager (Start-Settings-Control Panels-System;  
Device Manager Tab).  
2. Select the USB-Serial Adapter. It will appear as Unknown Device,  
Composite Device or USB Device. It will appear under “Other  
Devices” or “Universal Serial Bus Controller”.  
3. Click “Properties”.  
4. Click on “Reinstall Drivers”.  
5. In Add New Hardware Wizard click “Next”.  
6. It will now conduct a search, choose “Next”.  
7. Select “Specify Location”. Next click “Browse” or select the driver  
location. Select either the drivers on the CD (Example: D:\U209-000-R)  
or the one downloaded. Note, if you are using Windows ME you  
need to use the WIN98 driver. Click “Next”.  
8. If detected, click “Next”. (If not go back and try again).  
9. When done click “Finish”.  
10. Connect your Serial Device to the USB-Serial Adapter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Function  
Data Transfer Rate  
LED  
Power Consumption  
USB Specification  
Description  
Over 500 Kbps  
Data Transfer / Handshaking (orange)  
450 mW  
V1.1 Compliant  
DB-9 Assignments  
Pin  
1
Assignment  
CD  
Pin  
6
Assignment  
DSR  
2
RXD  
7
RTS  
3
TXD  
8
CTS  
4
DTR  
9
RI  
5
GND  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC Radio/TV Interference Notice  
Note: This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy, and if not installed and used in  
accordance with the instruction manual, may cause interference to radio  
communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures: reorient or  
relocate the receiving antenna; increase the separation between the  
equipment and receiver; connect the equipment into an outlet on a circuit  
different from that which the receiver is connected; consult the dealer or an  
experienced radio/television technician for help. The user must use  
shielded cables and connectors with this product. Any changes or  
modifications to this product not expressly approved by the party  
responsible for compliance could void the user’s authority to operate the  
equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIFETIME LIMITED WARRANTY  
TRIPP LITE warrants its products to be free from defects in materials and  
workmanship for life. TRIPP LITE’s obligation under this warranty is limited to  
repairing or replacing (at its sole option) any such defective products. To obtain  
service under this warranty, you must obtain a Returned Material Authorization  
(RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.  
Products must be returned to TRIPP LITE or an authorized TRIPP LITE service  
center with transportation charges prepaid and must be accompanied by a brief  
description of the problem encountered and proof of date and place of purchase.  
This warranty does not apply to equipment, which has been damaged by  
accident, negligence or misapplication or has been altered or modified in any  
way.  
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES,  
EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit  
limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s)  
or exclusion(s) may not apply to the purchaser.  
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE  
FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP  
LITE is not liable for any costs, such as lost profits or revenue, loss of equip-  
ment, loss of use of equipment, loss of software, loss of data, costs of  
substitutes, claims by third parties, or otherwise.  
The policy of TRIPP LITE is one of continuous improvement. Specifications are  
subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1111 W. 35th Street, Chicago, IL 60609 USA  
773.869.1234 (USA) • 773.869.1212 (International)  
200205099 93-2072_EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Toshiba Blu ray Player BDX1100KC User Manual
Toshiba Copier e studio 550 650 810 User Manual
Toshiba Digital Camera CS3950DIF User Manual
Toshiba Projection Television TW40F80 User Manual
Transition Networks Cable Box A CF 01 User Manual
Triarch Fan CF 31080 User Manual
Vanguard Heating Indoor Fireplace VYGF33NRA User Manual
Vermont Casting Ventilation Hood IRHEDV32 User Manual
Viking Microwave Oven VMOS200BK User Manual
Weber Gas Grill LPG Gas Barbecue User Manual