Telecommunication Systems Division
®
IP5000-Series
Telephone User Guide
July 2010
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TAIS”)
Telecommunication Systems Division License Agreement
IMPORTANT: THIS LICENSE AGREEMENT (“AGREEMENT”) IS A LEGAL AGREEMENT BETWEEN YOU (“YOU”) AND TAIS. CAREFULLY READ THIS LICENSE AGREEMENT. USE OF ANY
SOFTWARE OR ANY RELATED INFORMATION (COLLECTIVELY, “SOFTWARE”) INSTALLED ON OR SHIPPED WITH A TAIS TELECOMMUNICATION SYSTEMS PRODUCT OR OTHERWISE MADE
AVAILABLE TO YOU BY TAIS IN WHATEVER FORM OR MEDIA, WILL CONSTITUTE YOUR ACCEPTANCE OF THESE TERMS, UNLESS SEPARATE TERMS ARE PROVIDED BY THE SOFTWARE
SUPPLIER. IF YOU DO NOT AGREE WITH THE TERMS OF THIS LICENSE AGREEMENT, DO NOT INSTALL, COPY OR USE THE SOFTWARE AND PROMPTLY RETURN IT TO THE LOCATION
FROM WHICH YOU OBTAINED IT IN ACCORDANCE WITH APPLICABLE RETURN POLICIES. EXCEPT AS OTHERWISE AUTHORIZED IN WRITING BY TAIS, THIS SOFTWARE IS LICENSED FOR
DISTRIBUTION THROUGH TAIS AUTHORIZED CHANNELS ONLY TO END-USERS PURSUANT TO THIS LICENSE AGREEMENT.
1. License Grant. The Software is not sold; it is licensed upon payment of applicable charges. TAIS grants to you a personal, non-transferable and non-exclusive right to use the copy of the Software
provided under this License Agreement. You agree you will not copy the Software except as necessary to use it on one TAIS system at a time at one location. Modifying, translating, renting, copying,
distributing, printing, sublicensing, transferring or assigning all or part of the Software, or any rights granted hereunder, to any other persons and removing any proprietary notices, labels or marks from the
Software is strictly prohibited except as permitted by applicable law; you agree violation of such restrictions will cause irreparable harm to TAIS and provide grounds for injunctive relief, without notice,
against you or any other person in possession of the Software. You and any other person whose possession of the software violates this License Agreement shall promptly surrender possession of the
Software to TAIS, upon demand. Furthermore, you hereby agree not to create derivative works based on the Software. TAIS reserves the right to terminate this license and to immediately repossess the
software in the event that you or any other person violates this License Agreement. Execution of the Software for any additional capabilities require a valid run-time license.
2. Intellectual Property. You acknowledge that no title to the intellectual property in the Software is transferred to you. You further acknowledge that title and full ownership rights to the Software will remain
the exclusive property of TAIS and/or its suppliers, and you will not acquire any rights to the Software, except the license expressly set forth above. You will not remove or change any proprietary notices
contained in or on the Software. The Software is protected under US patent, copyright, trade secret, and/or other proprietary laws, as well as international treaties. Any transfer, use, or copying of the
software in violation of the License Agreement constitutes copyright infringement. You are hereby on notice that any transfer, use, or copying of the Software in violation of this License Agreement constitutes
a willful infringement of copyright.
3. No Reverse Engineering. You agree that you will not attempt, and if you employ employees or engage contractors, you will use your best efforts to prevent your employees and contractors from
attempting to reverse compile, reverse engineer, modify, translate or disassemble the Software in whole or in part. Any failure to comply with the above or any other terms and conditions contained herein
will result in the automatic termination of this license and the reversion of the rights granted hereunder back to TAIS.
4. Limited Warranty. THE SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, TAIS AND ITS SUPPLIERS
DISCLAIM ALL WARRANTIES WITH REGARD TO THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF NON-INFRINGEMENT OF THIRD
PARTY RIGHTS, THE WARRANTY OF YEAR 2000 COMPLIANCE, AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. NEITHER TAIS NOR ITS SUPPLIERS WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET
YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. HOWEVER, TAIS WARRANTS THAT ANY MEDIA ON WHICH THE
SOFTWARE IS FURNISHED IS FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE FOR A PERIOD OF NINETY (90) DAYS FROM THE DATE OF DELIVERY TO
YOU.
5. Limitation Of Liability. TAIS’ ENTIRE LIABILITY AND YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LICENSE AGREEMENT SHALL BE AT TAIS’ OPTION REPLACEMENT OF THE MEDIA OR
REFUND OF THE PRICE PAID. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TAIS OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL,
SPECIAL, INCIDENTAL OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION/DATA, OR ANY
OTHER PECUNIARY LOSS OF ANY KIND ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE, EVEN IF TAIS OR ITS SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO EVENT SHALL TAIS OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM BY A THIRD PARTY.
6. State/Jurisdiction Laws. SOME STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, OR
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO SUCH LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU
SPECIFIC RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE/JURISDICTION TO STATE/JURISDICTION.
7. Export Laws. This License Agreement involves products and/or technical data that may be controlled under the United States Export Administration Regulations and may be subject to the approval of the
United States Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the United States Export Administration Regulations, or any other applicable law, regulation or
order, is prohibited.
8. Governing Law. This License Agreement will be governed by the laws of the State of California, United States of America, excluding its conflict of law provisions.
9. United States Government Restricted Rights. The Software is provided with Restricted Rights. The Software and other materials provided hereunder constitute Commercial Computer Software and
Software Documentation and Technical Data related to Commercial Items. Consistent with F.A.R. 12.211 and 12.212 they are licensed to the U.S. Government under, and the U.S. Government’s rights
therein are restricted pursuant to, the vendor’s commercial license.
10. Severability. If any provision of this License Agreement shall be held to be invalid, illegal or unenforceable, the validity, legality and enforceability of the remaining provisions hereof shall not in any way
be affected or impaired.
11. No Waiver. No waiver of any breach of any provision of this License Agreement shall constitute a waiver of any prior, concurrent or subsequent breach of the same or any other provisions hereof, and no
waiver shall be effective unless made in writing and signed by an authorized representative of the waiving party.
12. Supplier Software. The Software may include certain software provided by TAIS suppliers. In such event, you agree that such supplier may be designated by TAIS as a third party beneficiary of TAIS with
rights to enforce the Agreement with respect to supplier’s software.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS LICENSE AGREEMENT AND THAT YOU UNDERSTAND ITS PROVISIONS. YOU AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU
FURTHER AGREE THAT THIS LICENSE AGREEMENT CONTAINS THE COMPLETE AND EXCLUSIVE AGREEMENT BETWEEN YOU AND TAIS AND SUPERSEDES ANY PROPOSAL OR PRIOR
AGREEMENT, ORAL OR WRITTEN, OR ANY OTHER COMMUNICATION RELATING TO THE SUBJECT MATTER OF THIS LICENSE AGREEMENT.
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
9740 Irvine Boulevard
5932
Irvine, California 92618-1697
United States of America
DSD 020905
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
End-User Limited Warranty
Toshiba America Information Systems, Inc., (“TAIS”) warrants that this telephone equipment manufactured by
Toshiba (except for fuses, lamps, and other consumables) will, upon delivery by TAIS or an authorized TAIS
dealer to a retail customer in new condition, be free from defects in material and workmanship for twenty-four (24)
months after delivery, except as otherwise provided by TAIS in the TAIS warranty accompanying the products or
posted on TAIS’s website. Products which are not manufactured by Toshiba but are purchased from Toshiba, will
be subject to the warranty provisions provided by the equipment manufacturer, unless TAIS notifies the end-user
of any additional warranty provisions in writing.
This warranty is void (a) if the equipment is used under other than normal use and maintenance conditions, (b) if
the equipment is modified or altered, unless the modification or alteration is expressly authorized by TAIS, (c) if
the equipment is subject to abuse, neglect, lightning, electrical fault, or accident, (d) if the equipment is repaired
by someone other than TAIS or an authorized TAIS dealer, (e) if the equipment’s serial number is defaced or
missing, or (f) if the equipment is installed or used in combination or in assembly with products not supplied by
TAIS and which are not compatible or are of inferior quality, design, or performance.
The sole obligation of TAIS or Toshiba Corporation under this warranty, or under any other legal obligation with
respect to the equipment, is the repair or replacement of such defective or missing parts as are causing the malfunc-
tion by TAIS or its authorized dealer with new or refurbished parts (at their option). If TAIS or one of its
authorized dealers does not replace or repair such parts, the retail customer’s sole remedy will be a refund of the
price charged by TAIS to its dealers for such parts as are proven to be defective, and which are returned to TAIS
through one of its authorized dealers within the warranty period and no later than thirty (30) days after such
malfunction, whichever first occurs.
Under no circumstances will the retail customer or any user or dealer or other person be entitled to any direct,
special, indirect, consequential, or exemplary damages, for breach of contract, tort, or otherwise. Under no circum-
stances will any such person be entitled to any sum greater than the purchase price paid for the item of equipment
that is malfunctioning.
To obtain service under this warranty, the retail customer must bring the malfunction of the machine to the
attention of one of TAIS’ authorized dealers within the applicable warranty period and no later than thirty (30)
days after such malfunction, whichever first occurs. Failure to bring the malfunction to the attention of an
authorized TAIS dealer within the prescribed time results in the customer being not entitled to warranty service.
THERE ARE NO OTHER WARRANTIES FROM EITHER TOSHIBA AMERICA INFORMATION SYSTEMS,
INC., OR TOSHIBA CORPORATION WHICH EXTEND BEYOND THE FACE OF THIS WARRANTY. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, AND FITNESS FOR USE, ARE EXCLUDED.
No TAIS dealer and no person other than an officer of TAIS may extend or modify this warranty. No such modifi-
cation or extension is effective unless it is in writing and signed by the Vice President and General Manager,
Telecommunication Systems Division.
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTIES FOR NON-TOSHIBA BRANDED THIRD PARTY PRODUCTS
A valuable element of Toshiba’s product strategy is to offer our customers a complete product
portfolio. To provide this value to our customers at the most optimal prices, we offer both
Toshiba-branded and third-party manufactured products that support our Toshiba Strata CIX
product portfolio. Similar to other resellers of software, hardware and peripherals, these third-
party manufactured products carry warranties independent of our Toshiba limited warranty
provided with our Toshiba-branded products. Customers should note that third-party
manufacturer warranties vary from product to product and are covered by the warranties
provided through the original manufacturer and passed on intact to the purchaser by Toshiba.
Customers should consult their product documentation for third-party warranty information
specific to third-party products. More information may also be available in some cases from the
manufacturer’s public website.
While Toshiba offers a wide selection of software, hardware and peripheral products, we do
not specifically test or guarantee that the third-party products we offer work under every
configuration with any or all of the various models of the Toshiba Strata CIX. Toshiba does not
endorse, warrant nor assume any liability in connection with such third party products or
services. If you have questions about compatibility, we recommend and encourage you to
contact the third-party software, hardware and peripheral product manufacturer directly.
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
Conventions......................................................................................................................x
IP5000-series Telephone Overview.....................................................................................4
Fixed Buttons....................................................................................................................5
Customizing Your Telephone............................................................................................13
LCD Contrast..................................................................................................................14
Brightness Control..........................................................................................................15
Backlight On/Off ............................................................................................................16
Keystrip Labels ..................................................................................................................17
Ring Tones.........................................................................................................................17
Dial Pad and Button Beeps.............................................................................................18
Speakerphone/Microphone Sensitivity Adjustment .......................................................19
Strata CIX IP5000-series Telephone UG 07/09
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 3 – SoftIPT
Dial Directory.................................................................................................................22
Switching Between Handset and Speakerphone.............................................................25
SoftIPT Icons..................................................................................................................32
Start the SoftIPT .............................................................................................................39
Making a Call .................................................................................................................39
Answering a Call ............................................................................................................40
Switching a Call to Your Headset ..................................................................................40
Labeling Feature Buttons................................................................................................40
Using the Directory.........................................................................................................41
Using Echo Canceller .....................................................................................................42
ii
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Voluntary Account Codes (Verified/Non-Verified).......................................................45
Automatic Busy Redial......................................................................................................47
Background Music.............................................................................................................49
Station.............................................................................................................................50
Station Call Forward Procedures....................................................................................52
Call History........................................................................................................................54
Group Pickup..................................................................................................................56
Call Waiting.......................................................................................................................59
Conference Calls................................................................................................................60
Conference Add/Split/Join/Drop ....................................................................................62
Direct Inward System Access (DISA) ...............................................................................64
Direct Station Selection Buttons (Hotline) ........................................................................64
Do Not Disturb...................................................................................................................65
Setting DND for Another Extension...............................................................................66
Door Lock(s)......................................................................................................................66
Door Phone(s) ....................................................................................................................67
Strata CIX IP5000-series Telephone UG 07/09
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 4 – Feature Operations
Executive Override.........................................................................................................75
Class of Service Override...............................................................................................75
Speed Dial..........................................................................................................................79
Storing Personal Speed Dial Names...............................................................................82
Time and Date Setting (Local)...........................................................................................84
Tone First / Voice First Signalling.....................................................................................85
Tone First Signalling ......................................................................................................85
Voice First Signalling.....................................................................................................85
Tone/Pulse Dialing.............................................................................................................86
Uniform Call Distribution..................................................................................................87
Login/Logout..................................................................................................................88
iv
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
ACO Volume Control........................................................................................................92
Microphone........................................................................................................................92
ACO Hold ..........................................................................................................................94
IP5122-SDC Programming................................................................................................96
Brightness Control........................................................................................................103
Transferring to an Idle Station......................................................................................105
Call Transfer with Camp-on.........................................................................................106
Call Answering (Outside Line).....................................................................................106
Speed Dial.....................................................................................................................106
Paging ...........................................................................................................................107
Call Forward Override (DSS Override)........................................................................107
Night Transfer Button...................................................................................................107
Strata CIX IP5000-series Telephone UG 07/09
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Chapter 7 – Headset and Handset Operation
Headset and Handset Interactions....................................................................................109
Headset Transmit Level Adjustments..............................................................................111
Programmable Feature Button Codes ..............................................................................116
To Use a One Touch Button.........................................................................................119
IP Setup Instructions........................................................................................................126
IP Telephone Function Settings.......................................................................................129
Setting the IP Telephone Headset Transmit Volume.......................................................130
LCD Backlight Setting .................................................................................................132
LCD Backlight Brightness Control ..............................................................................132
Handset / Headset Side Tone Volume Setting..............................................................133
LCD Contrast Setting ...................................................................................................133
IP5131-SDL Settings .......................................................................................................134
Configurations ..............................................................................................................134
Network Settings ..........................................................................................................138
vi
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A – References
Sound Settings ..............................................................................................................154
Factory..........................................................................................................................165
Initialize........................................................................................................................168
Soft Keys..........................................................................................................................175
Button Labels...................................................................................................................176
IP5000-Series Telephone Tilt Angles..............................................................................181
Wiring ..............................................................................................................................184
Appendix C – Centrex Application
Flexible Directory Numbering.........................................................................................185
Centrex Feature Buttons ..................................................................................................185
Ringing Repeat.................................................................................................................185
Delayed Ringing ..............................................................................................................186
Index ....................................................................................................................................187
Strata CIX IP5000-series Telephone UG 07/09
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
This user guide describes how to use the Toshiba IP5000-series telephones with the
Strata CIX670, CIX200, CIX100, CIX100-S, and CIX40 telephone systems. These
include:
•
•
Strata IP5000-series digital telephones shown in Table 1 on Page 2.
Strata IP Add-on Modules.
that support the backlight feature.
•
•
•
Chapter 2 – The Basics covers the basic telephone functions.
Chapter 4 – Feature Operations includes an explanation of Soft Key operations,
an alphabetical feature list and LCD information.
•
•
•
•
Chapter 5 – IP5122-SDC explain the operation of the Analog Central Office
(ACO) button to connect directly to the local Central Office.
Chapter 6 – ADM/DSS Console explains features and functions of the Add-on
modules.
Chapter 7 – Headset and Handset Operation explains the interactions of these
accessories with the IP5000-series telephones.
Chapter 8 – User Programming explains how to program the Programmable
Feature Buttons, such as setting One Touch buttons, changing Personal Speed Dial
numbers, as well as other user programmable functions.
Strata CIX IP5000-series Telephone UG 07/09
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
How to Use This Guide
•
•
performed by an Administrator.
Appendix A – References includes tables that support procedures in the Basic and
Feature Operation chapters.
•
•
Appendix B – Hardware Connections includes tilt angles and telephone wiring
diagrams.
Appendix C – Centrex Application describes the Centrex features which may be
available with your Strata CIX system.
How to Use This Guide
This guide provides in-depth instructions for the IP5000-series telephones and their
features. Most telephone users can use the “Strata CIX IP5000-series Quick Reference
Guide” instead of this guide.
Conventions
Note Elaborates specific items or references other information. Within some tables,
general notes apply to the entire table and numbered notes apply to specific
items.
Important! Calls attention to important instructions or information.
CAUTION! Advises you that hardware, software applications, or data could be
damaged if the instructions are not followed closely.
WARNING! Alerts you when the given task could cause personal injury or death.
x
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
How to Use This Guide
Conventions
Description
Represents any Directory Number button, also known as an
extension or intercom number.
[DN]
Telephones can have multiple extensions. Incoming calls
ring extensions bottom to top.
Represents any Primary Directory Number button (the
extension number for the telephone).
[PDN]
[SDN]
[PhDN]
Represents any Secondary appearance of a PDN. A PDN
which appears on another telephone is considered an SDN.
Represents any Phantom Directory Number button (an
additional DN).
Arial Bold
Courier
Arial
Represent telephone buttons.
Shows a computer keyboard entry or screen display.
Represents LCD displays, tokens or custom IVR functions.
Indicates entry of a string of text.
“Type”
Indicates entry of a single key. For example: Type prog
then press Enter.
“Press”
Shows a multiple PC keyboard or phone button entry. Entries
without spaces between them show a simultaneous entry.
Example: Esc + Enter. Entries with spaces between them
show a sequential entry. Example: #+5.
Plus (+)
Tilde (~)
Means “through.” Example: 350~640 Hz frequency range.
Denotes a procedure.
Denotes the step in a one-step procedure.
Start > Settings >
Printers
Denotes a progression of buttons and/or menu options on the
screen you should select.
Strata CIX IP5000-series Telephone UG 07/09
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Related Documents/Media
Conventions
Description
Grey words within the printed text denote cross-references.
In the electronic version of this document (Library CD-ROM
or FYI Internet download), cross-references appear in blue
hypertext.
See Figure 10
Related Documents/Media
Note Some documents listed here may appear in different versions on the
electronically or in print. To find the most current version, check the version/
date in the Publication Information on the back of the document’s title page.
Refer to the following for more information:
•
Strata CIX General Description
• Strata CIX IP5000-series Telephone Quick Reference Guide
• Strata CIX Installation and Maintenance Manual
•
Strata CIX Programming Manual - Volume 1
• Strata CIX My Phone Manager User Guide
xii
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
1
The IP5000-series telephones connected to a Strata CIX telephone system, running
Release 5.2 or higher software, include a selection of IP telephone models and
matching IP add-on modules, as well as a 60 button DSS Console. See Table 1 for
more details.
The IP5000 telephones offer a built-in gigabit ethernet switch allowing the telephone
to autosense the network speed, 10/100/1000Mbps.
Through dynamic soft key assignments, the LCD telephones provide easy access to
frequently-used features by prompting specific tasks, providing Outside Line
Identification, User Name/Number, Call Duration, Date/Time of Day displays, and
Name and number displays of incoming callers.
The full-duplex speakerphone on these telephones enables you to place and receive
calls without lifting the handset.
The LCD telephones with 10 and 20 buttons are available with LCD backlight. To
change the backlight settings, refer to Chapter 4 – Feature Operations.
Strata CIX IP5000-series Telephone UG 07/09
1
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
Table 1
IP5000 Series Telephones
Description
Image
10 Button IP Telephone:
• 4 line LCD with back light option
• Full duplex Speakerphone
• Headset I/F
• Ringing LED
20 Button IP Telephone:
• 4 line LCD with back light option
• Full duplex Speakerphone
• Headset I/F
• Ringing LED
20 Button with Electronic LCD Labels:
• 9 line LCD with back light
• Full duplex Speakerphone
• Headset I/F
• Ringing LED
2
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
The IP5000-series telephone upgrade options include:
Table 2
IP5000 Series Add-on Modules
Description
Image
10 Button ADM for IP5000-series
• LCD programmable key strip with
back light
20 Button ADM for IP5000-series
• Paper Key Strip
60 Button DSS for IP5000-series
• Paper Key Strip
Strata CIX IP5000-series Telephone UG 07/09
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
IP5000-series Telephone Overview
IP5000-series Telephone Overview
The illustration of the IP5000-series telephone shown below gives a general idea of
the basic attributes found on most of these telephones. The positioning of the buttons
varies per telephone model.
A
B
C
D
E
F
G
H
J
K
I
20 Programmable Feature Buttons 4-Line LCD Telephone
Legend
A. Status LED (message and ringing)
B. LCD Display
C. Softkeys
D. Programmable Feature Buttons
E. Message Waiting LED Button
F. Microphone LED Button
G. Speaker LED Button
H. Volume Button
I. Hold Button
J. Microphone
K. Tilt stand
4
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
IP5000-series Telephone Overview
Fixed Buttons
The fixed buttons on the dial pad help perform standard functions quickly and easily.
Layouts
Fixed buttons are laid out differently on the IP5000-series telephones.
9-line LCD Telephone
10 and 20 Button 4-line LCD Telephones
Fixed buttons are located on either side of the dial pad.
Strata CIX IP5000-series Telephone UG 07/09
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
IP5000-series Telephone Overview
The Fixed buttons are described below.
Table 3
Fixed Button Definitions
Button
Definitions
Message (Msg): When Msg LED flashes, press Msg to call back the
station or voice mail device that activated the LED. This is the
telephone’s [PDN] message waiting button.
Important!
Red LED must be on in order for button to function.
Microphone (Mic/Mute) button toggles between Mic and Mute. When
Mic key is lit, Mute is disabled. When Mic is pressed again and light is
off, Mute is enabled on the microphone in the telephone and the
microphone in the handset.
Speaker: Press to toggle the speaker ON/OFF. When red Speaker LED
is lit handsfree communications is supported.
To start a handsfree conversation; press the Speaker button, this turns
again (Speaker LED off).
During a handset conversation, press the Speaker button to start
hands-free communications (red Speaker LED on). Press the Speaker
button again to transfer the conversation back to the handset (Speaker
LED off).
Press and release the volume control bar to adjust volume levels. See
“Volume Control” on page 13.
Important!
Continuously holding the volume button (up or down)
does not change the volume. It is adjusted on a per
press basis.
Shift Key: Purple button on the IP5131 telephone. Press Shift at any
time to alternate between display of feature keys 1~10 and feature keys
11~20.
6
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
IP5000-series Telephone Overview
Table 3
Fixed Button Definitions (continued)
Button
Definitions
key used for moving the cursor on html pages and in the programming
screens. Center of the button is the “select” function. The arrows are
used to scroll up, down, left or right.
Press Spdial and enter 3-digit Speed dial access code. Speed dial
access codes must be setup before they can be accessed. See “Speed
Dial” on page 79.
Spdial
Redial
Press Redial to dial the last telephone number called (internal or
external).
If you have Automatic Line Selection, lift the handset first.
Press Cnf/Trn to add internal or external parties to a conference call (up
to 8 parties).
Cnf/Trn
(Conference/Transfer)
Press Cnf/Trn and enter a number to transfer a call to another party (on
the CIX system).
Press Hold to place an internal or external call on hold.
Press Hold Hold to place an internal or external call on Exclusive hold.
If your telephone is programmed for Automatic Hold, existing calls are
automatically placed on hold when you answer a call or make another
call.
Hold
Strata CIX IP5000-series Telephone UG 07/09
7
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
IP5000-series Telephone Overview
Programmable Feature Buttons
Programmable Feature Buttons are programmed
by the System Administrator and can be
customized on a per user basis.
10
09
08
07
06
05
04
03
02
01
20
19
18
17
16
15
14
13
12
11
See Table 24 on page 176 for a list of
Programmable Feature Buttons.
Note Programmable Feature Buttons are
numbered bottom to top, left to right
Key Strip
The key strips on the IP5000-series telephones
and add-on modules are either electronic
(programmable) or paper (refer to Table 1 and
Table 2).
Programmable Feature Button
Layout
8
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
LCD
LCD
9-Line LCD Display
The LCD on the 9-Line LCD telephone (shown below) in idle state shows:
Top to Bottom
Line 1 or the top line of the LCD will display your user name (if programmed) and
your extension number.
Line 2 will show the Date and time.
Line 3 will show information related to your telephone set: VM New/Saved messages,
Call Forward, or if a certain feature is enabled on your telephone set.
A plus sign + on the LCD indicates there is more data to display. Press NEXT to
advance through the information.
Lines 4~8 will indicate Programmable Feature Button labels. See “Browser” on Page 10
Line 9 will display the Soft Keys (See “Soft Keys” on page 11).
Shift Button
Blue Button – toggles in-
between call processing
screen and HTML
toggles between
Programmable
Feature Buttons
1~10 and 11~20.
browser or programming.
Navigation Button -
See “Browser” on
Page 10
Strata CIX IP5000-series Telephone UG 07/09
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The Grand Tour
LCD
Browser
Note This feature applies to the IP5131-SDL telephone.
Toshiba’s IP5131-SDL with it’s large display screen also supports an HTML browser
to allow navigation on the World Wide Web or a company’s intranet. The phone can
have a homepage setup that allows navigation to begin just like a homepage in your
internet browser.
Web pages display basic HTML but do not support ASP or Flash. The 18 buttons that
surround the screen can be used to highlight selections in the browser. The Navigation
Button can be used to move the viewing window across the website; the center of the
navigation button can be pressed to select a field that is highlighted.
The browser allows navigation through various pages of content and is not static to
just one site. Navigation is as easy as highlighting a link and selecting it to move to the
next webpage. All IP5131-SDL telephones come with the browser enabled. In order
to access the browser, press the blue button on the bottom right-hand side of the
phone; this allows you to switch between your call processing screen and the browser
window.
4-Line LCD Display
The LCD in it's idle state (shown right)
displays:
Line 1 or the top line of the LCD will
display your user name (if programmed)
and your extension number.
Line 2 will show the Date and time.
Line 3 will show information related to
your telephone set: VM New/Saved
messages, Call Forward, or if a certain
feature is enabled on your telephone set.
IP5000 4-line LCD display in Idle Mode
A plus sign + on the LCD indicates there
is more data to display. Press NEXT to advance through the information.
Line 4 will display the soft keys available in idle state. Press DSPLY to switch from
the Call Forward display to the User Name display.
10
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Soft Keys
Softkeys (SK1 - SK4) refer to the four
buttons directly below the LCD screen
(shown right). Soft Keys dynamically
change their functions and label
depending on the state of the telephone.
The dynamic feature associated with the
Soft Key is displayed on the bottom line
of the LCD display directly above each
Soft Key button.
SK1
SK2
SK3
SK4
Strata CIX IP5000-series Telephone UG 07/09
11
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
2
This chapter reviews the basic operations of the IP5000-series telephones. The
instructions apply to all telephone models, except when noted otherwise.
Customizing Your Telephone
Volume Control
To adjust the handset volume
Press the Vol to increase volume and Vol to decrease volume during the call.
When you hang up, the volume returns to the default setting.
To adjust the speaker volume for internal/external calls and background music
1. Press Spkr.
2. Press an extension button - you hear dial tone.
3. Press the Vol to increase volume and Vol to decrease volume. This volume
setting applies to all calls until changed.
To adjust Ring Tone, Hands free Answerback and Speaker Off-hook Call
Announce
Make sure the telephone is idle and the handset is on-hook. Press the Vol to
increase volume and Vol to decrease volume. This adjusts volume for your
telephone’s ring tone, Hands free Answerback and Speaker Off-hook Call
Announce simultaneously.
Strata CIX IP5000-series Telephone UG 07/09
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Customizing Your Telephone
To adjust handset Beep Tone
1. With the handset off-hook, dial the Beep Tone Adjustment Code #6101 (default
code). You hear beep tone.
2. Press Vol or Vol to reach the desired level.
LCD Contrast
Available on backlit telephones and backlit add-on module.
To adjust the LCD contrast on the backlit telephones
1. Press and hold down the Mic button.
2. Press and release Vol or Vol repeatedly.
Note Holding the Vol button does not continue to change the setting. The button must
be pressed for each step of contrast change.
To adjust the LCD contrast on the Add-on Module
1. Press Hold+3+6+9 (simultaneously).
2. Press Contrast + button to increase contrast.
3. Press Contrast - button to decrease contrast.
4. Lift the handset off-hook / on-hook to save settings.
Note Holding the softkey does not continue to change the setting. The softkey must
be pressed for each step of contrast change
14
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Customizing Your Telephone
Brightness Control
Available on backlit telephones with 4-line LCD’s and backlit add-on module.
To change the LCD back light brightness
1. Press Hold+3+6+9 (simultaneously).
2. Press Bright softkey to increase brightness.
3. Press Dim softkey to decrease brightness.
4. Lift the handset off-hook / on-hook to save the settings.
Note Use the BL BRIGHT and BL DIM buttons in steps 2 and 3 on the 10 button LCD
Add-on Module.
To change the LCD backlight brightness for IP5131-SDL
1. Press Hold+3+6+9 (simultaneously).
2. Press the Others softkey.
3. Press the BL Bright softkey.
4. Enter a value of 0~3 using the dialpad. (0 = dim; 3 = brightest)
5. Press the Set softkey twice.
Strata CIX IP5000-series Telephone UG 07/09
15
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Customizing Your Telephone
Backlight On/Off
Available on backlit telephones and backlit add-on module.
To change Backlight Settings
1. Press Hold+3+6+9 (simultaneously).
2. Press the Mic button.
3. Press Hold.
4. Use table below to choose preferred settings.
5. Press Hold Hold to save settings
Table 4
Button
Backlight Settings
Input
Meaning
1
2
3
Always Off
Always On
On-demand
Backlight
FB1
FB2
1~30
Timer [ x10 seconds]
Example: 1 = 10 seconds; 30 = 300 seconds.
Note FB1 is the lower left key, FB2 in the next up, FB3 is above FB2, and FB4 is
above FB3.
16
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Keystrip Labels
Keystrip Labels
Available on 9 Line LCD telephone and 10 Button LCD Add-on Module
To program LCD Keystrip Labels
1. Dial #9876 (or press the flexible Program button)
2. Press the Speaker button.
3. Press the button you wish to label.
4. Use the dialpad to enter the label.
5. Press the button labeled in step 3 to save the setting.
6. To label another button, repeat steps 3-5.
7. To exit User Programming mode lift the handset off-hook / on-hook.
Ring Tones
To set distinctive ringing
1. Press #9876 to enter User Programming Mode.
2. Press a Line or extension button. The LED is steady green.
3. You can press Hold to switch between internal and external pitch. (Internal =
station calls within your system; external = outside line calls.)
4. Enter the two-digit pitch number (see Table 5 on page 18).
5. Press the same button that you pressed in Step 2 (Line or extension). Two beeps is
a confirmation tone and “DATA PROGRAMMED” displays on your LCD.
6. Lift the handset off-hook/on-hook to save settings.
Strata CIX IP5000-series Telephone UG 07/09
17
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Ring Tones
Table 5
Internal and External Call Ringing Tones
Tone No.
01
Frequency and Cadence
500 Hz 1 sec. On, 3 sec. Off, repeat
02
1300 Hz 1 sec. On, 1 sec. Off, repeat
11
12
13
14
15
16
17
18
500/640 Hz 1 sec. On, 3 sec. Off, repeat
500/640 Hz 1 sec. On, 1 sec. Off, repeat
860/1180 Hz 1 sec. On, 3 sec. Off, repeat
860/1180 Hz 1 sec. On, 1 sec. Off, repeat
1300/1780 Hz 1 sec. On, 3 sec. Off, repeat
1300/1780 Hz 1 sec. On, 1 sec. Off, repeat
860/1180 Hz 0.5 sec. On, 1300/1780 Hz 3 sec. Off, repeat
860/1180 Hz 0.5 sec. On, 1300/1780 Hz 1 sec. Off, repeat
Dial Pad and Button Beeps
IP telephones can emit a “beep” whenever a dial pad or feature button is pressed. The
“beeps” are On by default. Follow these steps to turn the “beeps” On or Off.
1. Press 3+6+9+Hold (simultaneously).
2. Press 0.
3. Press Hold.
4. Press Programmable Feature Button 1 (FB1) to toggle On/Off.
FB1, LED On: buttons beep.
FB1, LED Off: buttons do not beep.
5. Press Hold to set the option.
6. You must also go off-hook, then on-hook to exit the program mode.
18
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Ring Tones
Speakerphone/Microphone Sensitivity Adjustment
When you are using the speakerphone, high ambient noise levels may cause the party
you are talking with to be to cut off frequently. If this happens, follow these steps to
lower the sensitivity of the microphone on a IP5000-series telephone. The default is
normal sensitivity.
1. Press 3+6+9+Hold (simultaneously).
2. Press 0.
3. Press Hold.
4. Press Programmable Feature Button 3 (FB3) to toggle On/Off.
FB3, LED On: Lower sensitivity
FB3, LED Off: Normal sensitivity
5. Press Hold to set the option.
6. Go off-hook, then on-hook to exit the program mode.
Strata CIX IP5000-series Telephone UG 07/09
19
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Telephone Terminology
Telephone Terminology
When making or receiving calls on your IP5000-series telephone you may experience
one or more of the following call features depending on how your telephone is
configured.
•
Line – is synonymous with trunk which is the line that connects you to the PSTN
(Public Switched Telephone Network). Line can be:
•
•
a button on your telephone set designated for outgoing calls
your DN button followed by dialing 9.
•
•
Automatic Line Selection (ALS) – ALS is engaged on outgoing calls. Lift the
handset or press Spkr to hear dial tone, the steady green Line LED indicates ALS
in enabled. The second line of the LCD will display the method of dialing
available, followed by the digits dialed.
Ringing Line Preference – Answer any incoming call by lifting the handset or
pressing Spkr. There is no need to press the ringing line button to answer the call
when ringing line preference is enabled.
•
•
Tone First Signaling – Internal incoming calls only: telephone rings in standard
ring tone, lift handset or press Spkr to answer call.
Voice First Signaling – Internal incoming calls only: a long tone is heard,
followed by the caller's voice, this will automatically engage the Spkr to allow for
hands free communications. Lift the handset if desired (for privacy). When Voice
First Signaling is enabled the telephone does not ring on internal incoming calls.
•
Hot Dialing – Dial a telephone number from the dialpad, the telephone
automatically selects a line, shown with a green LED, and turns on the Spkr and
Mic LED's. When Hot Dialing is not turned on the handset should be lifted or Sprk
should be pressed in order to make a call.
20
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Making a Call
Making a Call
There are three ways to originate a call from the telephone:
Handset
1. To make a call, lift the handset, then dial the number.
A line may be automatically selected or choose a line manually. Dial tone is heard
through the handset. The Speaker and Microphone LEDs do not light.
Digits display as they are dialed. Call progress tones (Ringback Tone, Busy Tone,
etc.) are heard through the handset.
2. When connected, continue using the handset or switch to speakerphone by holding
down Spkr and placing the handset in the cradle.
Spkr Button
1. To make a call, press Spkr.
A line may be selected automatically or choose a line manually. The extension or
Line button lights (depending on system programming). Dial tone is heard
through the speaker. The Speaker and Microphone LEDs light.
2. Dial the number.
Digits display as they are dialed. Call progress tones (Ringback Tone, Busy Tone,
etc.) are heard through the speaker.
3. When connected, continue using the speakerphone or lift the handset to continue
the conversation.
Hot Dialing
1. To make a call using Hot Dialing, start dialing the number.
The extension button, Spkr and Mic LEDs light. Digits display as they are dialed.
Call progress tones (Ringback Tone, Busy Tone, etc.) are heard through the
speaker.
2. When connected, continue using the speakerphone or lift the handset to continue
the conversation.
Strata CIX IP5000-series Telephone UG 07/09
21
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Making a Call
Dial Directory
This feature is supported on IP5000-series telephones with an LCD display running on
CIX R5.2 (or higher) software. Calls can be made by selecting a name from the
alphabetical telephone directory.
To access the Directory
1. Press DIR soft key (shown right).
TOM EDISON
APR 05 WEDNESDAY
NO.2004
1:01PM
Select Directory menu appears.
The soft keys on the Select
Directory are:
My = Personal Speed Dial Names
EXTR = System Speed Dial Names
INTR = Directory Number Names
Dial = Cancel directory, get dial
tone.
DIR
4 Line LCD Display
2. Choose the directory you wish to access and use the dial pad to enter the name.
Notes
•
If a directory is not selected and a name is entered, all directories will be
searched.
• To enter names from the dial pad, press the dial pad button associated with the
letter to be entered. Press the button once for the first letter, twice for the second
letter, etc. Left and Right Soft Keys are available to move the cursor.
3. Press FIND to start the directory search.
4. Press NEXT to move forward through the directory.
5. Press BACK to move backwards through the directory.
6. Press Call to connect to the directory entry selected.
On the 9-line LCD Display, press the button next to the displayed name. See figure
on following page.
7. Press CNCL to quit the directory search.
22
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Making a Call
Press the key next to the displayed
name to call that person.
BOB L (PRI)
BOB LAWVER
BILL THOMAS
ONE TOUCH
PICKUP
BRAD FERRIS
BRAD FISHER
BRIAN SMITH
ONE TOUCH
ONE TOUCH
ONE TOUCH
ONE TOUCH
ONE TOUCH
CFAC
DND
Ext. 4227
NEXT
BACK
CNCL
9 Line LCD Display - Dial by Name Screen
Strata CIX IP5000-series Telephone UG 07/09
23
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Answering a Call
Answering a Call
There are several ways to answer a call:
Handset
When the telephone is programmed for Ringing Line Preference, pick up the
handset and the telephone automatically answers the ringing line.
... or press the button associated with the ringing line (flashing green LED).
Speaker
When the telephone is programmed for Ringing Line Preference, press Spkr and
the ringing line is answered.
... or press the button associated with the ringing line (flashing green LED). Once
connected, continue using the speakerphone or lift the handset.
Shift Button
Available on a 9-line display telephone only.
If the LCD screen is set to view Buttons 11~20 and a call comes in on Button 1 the
phone will ring and Caller ID information will display on the top of the screen,
press the “Shift” Button to view Buttons 1~10 and answer the call.
Handsfree Answerback
With speakerphone enabled, the telephone may be programmed for Handsfree
Answerback. The called party hears a single long tone, followed by the caller’s voice.
Begin hands free conversation. If Handsfree Answerback were not programmed, the
called party could hear the calling party speak but would not be able to answer them
without answering the call manually.
Notes
• The extension LED flashes green, the Microphone LED lights steady red and the
Speaker LED flashes Red.
•
•
In order to perform any additional functions with this call (like a transfer or hold)
the call must be properly answered to gain full call control. Perform the same steps
you normally would to answer a call: press the Spkr button, the flashing DN button
or lift the handset.
Handsfree MIC setting needs to be enabled by your System Administrator.
24
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
On a Call
While on a call you can perform the following:
Switching Between Handset and Speakerphone
Press Spkr and place the handset on-hook to switch from handset to speakerphone
mode.
Take the handset off-hook to switch from speakerphone to handset mode.
Microphone (Mic/Mute) Button
This button toggles between Mic and Mute. When Mic button is lit, handsfree
communication is supported, when Mic is pressed again and light is off, Mute is
enabled and mutes both the microphone and the handset.
Hold
To place a call on hold, press Hold. Your LCD shows the line on hold. The held
Line’s LED flashes green while appearances of the line at other stations flash red.
•
•
To return to the held call, press the flashing held Line button.
If you do not return to the held call within a specified time, it rings back to your
telephone. The call remains camped-on to your station.
• If the held party hangs up, the call is released.
See the Call Pickup section to pick up a call on hold from another extension.
•
Exclusive Hold
This feature enables you to place a call on hold so that only you can retrieve it.
While on a call, press Hold twice. That line’s LED flashes green while
appearances of the line at other stations are steady red (in use).
Strata CIX IP5000-series Telephone UG 07/09
25
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
On a Call
Automatic Hold
This features enables you to move from one Line button to another Line button
without pressing Hold.
Check with your System Administrator to make sure this setting is turned on. If
Automatic Hold is not enabled, calls will drop when moving from one line to another
without pressing Hold.
While on a call, press another extension button to receive/originate a new call. The
accessed line’s LED flashes (in-use). The first call is put on hold and your
extension’s LED flashes.
Consultation Hold
1. While on a call, press Cnf/Trn. The call goes on hold.
2. Dial another line.
3. Transfer the call or return to the held call by pressing its Line button.
26
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Message Waiting
Message Waiting
Use your Msg LED/button and LCD to see/retrieve message(s).
An extension can receive up to four simultaneous Message Waiting indications and
LCD messages. One message is reserved for the Message Center.
Your telephone can be programmed to have up to four additional (flexible) Message
Waiting buttons/LEDs. Check with your System Administrator to see if these buttons
have been programmed on your telephone. If so, substitute them when the Msg
button/LED is mentioned in the following steps.
Responding to a Lit Msg LED
1. On an LCD telephone, if you see a “+,” press SK3 to display additional messages;
otherwise, go to Step 2. The “+” indicates additional messages. The LCD can show
up to three station messages for your extension and three for each additional
(phantom) extension that you may have.
2. Press Msg, then lift the handset. Your telephone rings the extension or voice mail
device that sent the indication. The LED continues to flash red.
3. After answering the message(s), place the handset back on-hook.
4. If the Msg LED continues to flash, you have more messages; repeat Steps 1~3
above to retrieve them. Voice mail devices turn off the LED/LCD indications after
a short delay, after you checked all messages.
5. To manually turn off your Msg LED, press your extension button, then press
#409. Do this step for each message received.
Strata CIX IP5000-series Telephone UG 07/09
27
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Message Waiting
Turning On/Off MW LED on Another Extension
If you call an extension and it’s busy or there is no answer, you may be able to light
that extension’s Message Waiting LED and enable that extension to call you back.
The ability to perform this feature is set in system programming.
1. Dial an internal extension. You hear busy tone or there’s no answer.
2. Press Msg or 7. The Msg LED flashes red on the called telephone. At your
telephone, the Msg LED lights steady red and the LCD shows the station number
where you set a Message Waiting light. Example: “MW SET TO 3620.”
If you decide to cancel the Message Waiting light at this point, press Msg or 7
again while ring-over tone is playing and the light will be cancelled.
3. Press Spkr. Your Msg LED turns Off. The Msg LED on the called telephone
flashes until the called party presses the flashing Msg button which calls you back.
4. To turn Off a Message LED that you have set on another extension, press #64 plus
the extension number that has the message light set. Then press Spkr or hang up to
release your telephone. Your LCD shows the extension and “MW CANCEL.”
...or dial the extension that you set the Message LED on, then press 77. Then press
Spkr or hang up to release your telephone.
28
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics
Message Waiting
LED Indicator Details
Each line and Programmable Feature Button has a LED next to it which indicates the
status of the line or feature associated with the button. Line LEDs light red or green
and flash at varying rates to indicate call status (see Table 6).
Table 6
LED Indicators
Your Station (Green)
Interval Rates
Other Station (Red)
LED
Extension In-Use
(access outside line)
2 seconds On, 1/8 second Off
— 1/8 second On/Off
steady
Incoming Call
(while ringing)
1 second on at 10 pulses/second
—1 second Off
one second On/Off
Hold (outside line) If using Pooled Line
Grp, the hold indication is only at the
station that places the call on hold.
4 pulses/second for 1/8 second
On/Off
1/2 second On/Off
steady
Hold – Consultation
(during consultation/transfer to another
station)
10 pulses/second
10 pulses/second
Hold – Exclusive (outside line)
steady
flashes
Hold – Recall
(when held call recalls your idle station)
1 second at 2 pulses/second,
1 second at 10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
Hold – Exclusive Recall
steady
Internal Call
(while station ringing)
Your extension button flashes 10 [SDN] red flashing or
pulses/second—1 second Off green ringing
Busy Station Transfer
(outside call transferred to your busy station
from a designated station or AA)
Off
second Off
After disconnecting first call...
10 pulses/second
10 pulses/second
2 pulses/second
steady
Conference
Note LEDs on the telephone flash at different speeds depending on the function
performed. Flash rates can be found under “LED Indicator Details” on page 29.
Strata CIX IP5000-series Telephone UG 07/09
29
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
SoftIPT
3
The SoftIPT is a software phone client that runs on appropriately equipped wired or
wireless laptops, tablets and desktop PCs with all versions of Microsoft® Windows
VistaTM and Microsoft® Windows XP® operating software (OS). The SoftIPT Version
3.0 screen is shown below.
SoftIPT on a PC integrates the power of the PC with most of the features available on
an IP5000-series telephone. You can use most of the features described in this User
Guide or the Strata CIX IPT/DKT Telephone User Guide. .
Important! The SoftIPT functions in the same manner as a desktop IP telephone.
Use this manual as a guide to the SoftIPT functions.
Strata CIX IP5000-series Telephone UG 07/09
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SoftIPT
Message Waiting
SoftIPT Icons
Table 7
SoftIPT Button Definitions
Button
Definitions
SoftIPT Directory – Clicking this icon enables you to access the
directory you create using MS Outlook. Refer to “Using the Directory” on
page 41.
SoftIPT Configurations – Double click this icon to open the
Configuration window. This enables you to view and change SoftIPT
settings.
Audio Settings – Click this button to adjust the audio properties when
connected to a USB handset.
Help – Clicking this icon enables you to access Help as a user or find
information on Setting Audio Properties, etc. Click Help to view all
SoftIPT information.
Shift Button (Purple) – Press Shift at any time to alternate between
display of feature keys 1~10 and feature keys 11~20.
32
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
SoftIPT
Message Waiting
Fixed Buttons
The fixed buttons on your telephone enable you to perform standard functions quickly
and easily. These buttons are described in Chapter 2 – The Basics.
Flexible Buttons
All Flexible Buttons must be programmed for your telephone in system programming
and vary for individual telephones. If a button does not appear on your display or
telephone keystrip label, see your System Administrator for button assignments.
Line Buttons
You may have buttons designated as Line and/or Pooled Line Grp which enable
you to directly access outside lines. Pooled Line Grp enables you to access
available CO Lines from a group of lines appearing under one button.
Liquid Crystal Display
The Liquid Crystal Display (LCD) on the SoftIPT will display information similar to
the large 9-line IP telephone display:
• Desk Clock and Calendar in idle mode
•
•
Call Duration during an outside call
Operational, Advisory, and Notification messages
LCD Control Buttons
There are two types of LCD button functions: LCD Control Buttons and Soft Keys.
When the Soft Key prompts appear on the LCD, the LCD Control Button just below
the prompt offers access to that feature. See “Soft Keys” on page 11 for more
information.
• SK1 is generally used as a Soft Key.
• Pressing SK2 switches you from the Call Forward (CF) display to the User Name
display.
• Pressing SK3 advances you through information.
Strata CIX IP5000-series Telephone UG 07/09
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SoftIPT
Configuring SoftIPT 3.0
Configuring SoftIPT 3.0
Step 1: Configure the SoftIPT
1. After you have installed SoftIPT, double-click the SoftIPT icon on the desktop. The
SoftIPT Configuration window opens.
Important!
See the illustration below. You will need to enter items A-E to
configure SoftIPT. Check with your Telephone System Administrator
to make sure that you have this information. After entering this
information, print the screen for future reference.
Figure 1
SoftIPT Configurations
34
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
SoftIPT
Configuring SoftIPT 3.0
2. In the SoftIPT Configuration window, enter the following:
Fields Description
Phone No.
This is the SoftIPT extension.
Password for IP user mobility
Password
Node
The node ID where the MIPU resides. By default, leave blank.
Outgoing prefix
When a call is made using the SoftIPT directory, SoftIPT
automatically attaches the outgoing prefix for local calls, or long-
distance prefix for long-distance calls, respectively. See “Using the
Directory” on page 41 for details.
Long distance prefix
SoftIPT tries to connect to the IPU using the following addresses
in turn:
•
•
Primary IPU IP address
Secondary IPU IP address.
Notes
If Broadcast is selected, SoftIPT tries to search for the IPU by
sending broadcast messages, otherwise, it goes back to the
Primary IPU IP address. SoftIPT skips the Primary IPU IP address
or the Secondary one if it is not set. In either case, if SoftIPT
successfully connects to the IPU, the IPU IP address is shown in
the “Connected IPU IP Address” field. See your System
Administrator for IPU address.
IP address of IPU
If Broadcast is selected, the broadcast message is sent on the
same subnet, which means SoftIPT can connect to the IPU on the
same subnet using Broadcast mode without designating the IPU
IP address. However, in some PC environments, SoftIPT cannot
complete this broadcast registration sequence because the lower
network module does not notify SoftIPT, through Windows, of
receiving a reply message after sending a broadcast message.
Therefore, Toshiba recommends using Manual mode if SoftIPT
cannot find the IPU by Broadcast.
Network
If there are multiple network adapters, select the one for SoftIPT.
Strata CIX IP5000-series Telephone UG 07/09
35
Download from Www.Somanuals.com. All Manuals Search And Download.
SoftIPT
Configuring SoftIPT 3.0
Fields
Description
Check this box to automatically startup SoftIPT after starting your
PC.
Note If Automatic startup is unchecked and SoftIPT continues
to start up, use the MSCONFIG utility screen > Startup tab
Automatic startup
Popup window
The SoftIPT window pops up when receiving a call.
As shown below in Using the Directory, SoftIPT can use MS
Outlook (not Outlook Express) as its directory. If multiple Outlook
profiles are on your PC” on page 37.
Use Default
Microsoft Outlook
Profile
If you have only one profile as shown in See Figure 3 select
“Always use this profile” and check the “Use Default Microsoft
Outlook Profile” box as shown in See Figure 1. If you have several
profiles and choose one of them, select “Prompt for a profile to be
used” (See Figure 3), and uncheck the “Use Default Microsoft
Outlook Profile” box (See Figure 1).
If you uncheck this box, you can input an extension number every
time you log in. See “IP User Mobility” in the CIX General
Description and Programming Manual, Volume 1 for details.
Auto-Login on start-
up
This option dictates what happens when you press the close (X)
button in the upper right corner of the SoftIPT main window.
•
•
Run in the background if this box is checked.
Exit SoftIPT software if this box is unchecked.
Allow SoftIPT to run
in the background
Note If the SoftIPT icon is still on the system tray at the bottom
right corner of the PC, then SoftIPT is still running in the
background, even after pressing the Close (x) button.
3. Click OK.
36
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
To check how many Outlook profiles are on your PC
1. Go to Start > Control Panel > Mail
2. Double-click the Mail icon (see See Figure 2)
3. Click the Show Profiles... button
4. Here are all the profiles setup on your PC (See Figure 3)
Figure 2
Mail Setup - Outlook
Strata CIX IP5000-series Telephone UG 07/09
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SoftIPT
Basic SoftIPT Functions
Basic SoftIPT Functions
Start the SoftIPT
Double-click the SoftIPT icon on your desktop.
Making a Call
To make a call
1. Click Speaker then select the on-screen dial pad buttons to dial a call.
2. When connected to a call, you can select any of the call buttons, such as Redial,
Hold or Conf.
3. Click Speaker to end the call.
Note
Do not use BGM (#490) on the SoftIPT. It conflicts with incoming calls.
To make a Call using a USB Handset
To install a USB handset, refer to the vendor's documentation and/or website.
1. Go off-hook (pick up the receiver or press the hookswitch button on the USB
Handset) to get dial tone.
2. Dial the phone number - click the on-screen dial pad buttons, input numbers
(asterisk key, pound key) from PC keyboard, or use the key pad on the USB
handset, if available.
3. To end the call, go on-hook (put down the receiver or press the hookswitch button).
Strata CIX IP5000-series Telephone UG 07/09
39
Download from Www.Somanuals.com. All Manuals Search And Download.
SoftIPT
Basic SoftIPT Functions
Answering a Call
To answer a call using the Shift button
If the LCD screen is set to view keys 11~20 and a call comes in on key 1, the phone
will ring and Caller ID information displays on the top of the screen - press the
Shift key to view keys 1~10 and answer the call.
Switching a Call to Your Headset
You can switch a call from your IP telephone to the SoftIPT by placing the call on
Hold and using the Call Pickup feature.
1. Press Hold.
Note
as a One-touch Speed Dial button for ease of call switching.
Labeling Feature Buttons
SoftIPT Version 3.0 provides soft labels preset by the Strata CIX system. If you wish
to change them, contact your system administrator and see “Programming Feature
Buttons” on page 116.
40
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
SoftIPT
Basic SoftIPT Functions
Using the Directory
You can create a directory with MS Outlook (not Outlook Express).
1. Close SoftIPT if you are using it.
2. Open MS Outlook.
3. Double click on the Contacts icon, click on the New contact icon.
4. Type in the contact information, click Save and Close. Add as many entries as
desired. To edit an entry, double click on the name to open.
5. Start Soft Phone.
6. Click Directory icon. The directory displays (see below).
7. Click on the name. The SoftIPT calls the contact.
Strata CIX IP5000-series Telephone UG 07/09
41
Download from Www.Somanuals.com. All Manuals Search And Download.
SoftIPT
Basic SoftIPT Functions
Using Echo Canceller
If you have a headset plugged into the microphone/speaker jack of the PC, you do not
have to always enable echo canceller. We recommend you to enable echo canceller in
the event you want to use the PC's embedded microphone/speaker as a speakerphone
device and not attach a headset to the microphone/speaker jack of the PC. If the PC
does not have an embedded microphone even if it has embedded speaker, you do not
have to enable echo canceller because a headset would be plugged into the
microphone/speaker jack, see figure below.
To use Echo Canceller, click the Audio Setting of SoftIPT and check the Using Echo
Canceller box as shown below.
Enabling Echo Canceller
42
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
4
This chapter gives you more details about your IP5000-series telephone’s advanced
functions. An alphabetical list of supported features has been compiled in this chapter
for fast and easy reference.
Account Code Calls
Account Codes (Forced or Voluntary) can be used for a variety of reasons including
billing, tracking, and line restriction applications. Account Codes are assigned in the
system as a fixed length (default is six digits) and are recorded by the system, along
with the details of the calls, which can be printed on a Station Message Detail
Recording (SMDR) report.
Verified/Non-Verified Account Codes
Verified Account Codes ensure that the system checks the account code you entered
against a list created by the System Administrator. If the code is not in the list, the call
will not go through.
Non-Verified Account Codes must be a uniform length but any digits are accepted.
Account Codes and Lengths are setup and managed by the System Administrator.
Strata CIX IP5000-series Telephone UG 07/09
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Account Code Calls
Forced Account Codes
Some applications require you to enter an Account Code. These Forced Account
Codes may be verified or non-verified, depending upon the application, but in either
case, the caller must enter a code before proceeding.
To dial using Forced Account Codes
1. Place a call in the normal method.
If the call requires an Account Code, a burst of tone (Success Tone) is heard after
dialing the telephone number alerting you to enter the Account Code.
2. Enter the account number.
When the number of digits designated for account codes has been entered, the
number will be checked against the verified list, if chosen, and the call will
continue as normal. If the number of digits entered for the account code is not
reached or the verified code does not match, then re-order tone is heard and the call
is rejected.
You can bypass Forced Account Code requirements with three emergency numbers,
including 911. See your System Administrator for these numbers:
1) 911
2)
_______ 3)
_______
44
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Account Code Calls
Voluntary Account Codes (Verified/Non-Verified)
Voluntary Account Codes are optional. They can be entered during a call and are used
for tracking selected calls using Station Message Detail Report (SMDR) call detail
recording option.
If the system is set for Verified Account Codes, station users must enter a specific
code when entering the Voluntary Account Code(s) or the code is not validated for the
SMDR call report. This does not affect the call.
There are two ways to dial using a Voluntary Account Code:
To dial using the Account Code button
Note This will require a Programmable Feature Button to be programmed on your
telephone set with the Account Code feature (#46).
1. After accessing a Central Office (CO) line, press the Account Code button.
LCD telephones prompt you to “ENTER ACCOUNT CODE NOW.”
2. Enter the account code digits. The LCD prompt disappears upon entry of the first
account code digit. After the account code is entered, the time indicator is restored
to the LCD.
3. If your station is set for Verified Account Codes, you hear a confirmation tone
when the code is valid. If the code is invalid, you hear two short tones.
4. Enter the Account Code. Your conversation is not interrupted.
To enter an Account Code using access codes
Note It’s a good idea to warn the other party that you will be disconnected
momentarily when you enter the access code. Once the code is entered, you will
be connected again.
1. After accessing a CO line, press Cnf/Trn. Once you press Cnf/Trn, your call is
interrupted; you and the other party cannot hear each other. You will hear feature
dial tone.
2. Dial #46. LCD telephones prompt you to “ENTER ACCOUNT CODE NOW.”
3. Enter the account code digits. The prompt disappears upon entry of the first
account code digit. After the account code is entered, the connection is restored
and the LCD shows the time.
Strata CIX IP5000-series Telephone UG 07/09
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Advisory Messages
Advisory Messages
Advisory messaging enables you to store an informative message for LCD telephones
that call your telephone. The messages can be up to 16 characters long. The Strata
system provides a number of predefined messages, shown in the table below. Message
numbers 5~9 can be defined by your System Administrator.
Msg No.
Characters Displayed
OUT TO LUNCH
Additional Digits
0
1
2
3
4
5
6
7
8
9
IN A MEETING
CALL _____________
BACK AT __________
RETURN ON________
Directory Number (e.g.,220)
Time (e.g., 1030)
Date (e.g., 10 20)
To set an advisory message
1. Go off-hook or press your extension button to hear dial tone.
2. Press #411
3. Enter Message number (see table above)
4. Enter additional digits if required.
5. Go on-hook or press Spkr to release the line.
To clear the registered message
1. Go off-hook or press your extension button to hear dial tone.
2. Press #412.
3. Go on-hook or press Spkr to release the line.
46
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Alarm Notification Button
Alarm Notification Button
The Alarm Notification Button must be setup by your System Administrator on your
station.
When the Alarm Notification button displays
Call your System Administrator.
This button stops displaying when the alarm clears or when you press the flashing
button. If the alarm has not been cleared the Alarm Notification Button starts flashing
every 10 minutes.
Automatic Busy Redial
After reaching a busy outside number, you can activate Automatic Busy Redial so that
the system automatically redials the number at regular intervals. The system repeats
the redial until the destination is no longer busy. Check with your System
Administrator to see if this feature is setup for your telephone.
Automatic Busy Redial is not attempted while your station is busy, but continues to
time-out. The system inserts a pause (P) on your LCD before redialing the number.
To activate Automatic Busy Redial
1. When you reach a busy number, press Auto Busy Redial or Cnf/Trn + #441.
The LED flashes red. You hear confirmation tone.
2. Hang up or press Spkr. The system redials, up to five to 20 times, every 30 to 180
seconds (depending on system programming). Your telephone receives ring tone
when Automatic Busy Redial dials the number and it is available. The extension
and Spkr LEDs flash green.
3. Lift the handset or press Spkr and wait for the party to answer. If you do not pick
up the handset or press Spkr within recall timeout (five to 60 seconds) after a
connection is made, you hear a muted ring for another 30 seconds, then the call
disconnects.
To cancel Automatic Busy Redial
Press Auto Busy Redial or extension + #442.
Strata CIX IP5000-series Telephone UG 07/09
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Automatic Callback
Automatic Callback
When you reach a busy station, you can set Automatic Callback to have the system
monitor the busy extension and notify you when it becomes idle.
Automatic Callback can place you in queue for an available outside line, if you reach
a line group in which all lines are busy. When a station or line becomes available, the
system rings your telephone; when you answer the system automatically rings the
intended destination. The amount of time the system will wait for an idle destination is
set in system programming. Automatic Callback is also known as “CO Line
Queuing.”
To set Automatic Callback
1. If you hear busy tone after dialing an outside line access code or a station number,
press Auto Callback or 4. Busy tone stops, followed by success tone, then busy
tone resumes.
2. Hang up. You can make other calls while waiting.
3. When the called station or outside line becomes idle, your telephone rings and you
will see a fast flashing LED.
• If you called a busy station, the extension LED flashes green (incoming call)
and the called number displays.
•
If you called a busy outside line, the extension LED flashes green (incoming
call rate). The seized line’s number displays.
4. Answer within about three rings (can be programmed to ring up to three minutes)
to prevent the callback from being cancelled. After you answer, you hear success
tone, and the LED flashes green (in-use).
If you hear a busy tone after answering a callback, the called party is already on
another call or the line has already been seized or has received an incoming call.
Your request is not cancelled. You will be called again the next time a line becomes
idle.
If you were attempting to make an outside call, the telephone number is
automatically dialed, including the account code or override codes that were used.
To cancel ACB
Press Auto Callback or extension button + #431.
48
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Background Music
Background Music
You can set background music over your telephone speaker or over external speakers.
At least one music source must be connected to your system. Up to 16 different music
sources can be applied to the Strata CIX/CTX system: the first source is Quiet Tone,
all others can be music or recorded information.
To enable background music on your telephone speaker
Press BGM. LED turns on.
Or press an extension button + #490 + n + #, where n is the music source 1~15.
To cancel background music on your telephone speaker
Press BGM. LED turns off.
Or press an extension button + #491.
To change the BGM source (1~15) assigned to the BGM button
Press an extension button + #9876 + BGM + n + BGM, where n is the music
source 1~15.
To enable background music over your external paging speakers
Press an extension button + #492 + n + #, where n is the music source 1~15.
To cancel background music over your external paging speakers
Press an extension button + #493 + Spkr.
Strata CIX IP5000-series Telephone UG 07/09
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Call Forward
Call Forward
There are two types of Call Forwarding that you can set. One is System Call Forward
(set in System Programming) which automatically directs calls to a predefined
location, such as Voice Mail. See your System Administrator to determine or change
your System Call Forward destination.
The other type is Station Call Forwarding. You can use Station Call Forwarding to
replace your System Call Forward destination with a custom Call Forward setting
made from your station.
System
System Call Forward directs calls to a destination preset by an Administrator for each
telephone, commonly set to voice mail.
To turn on System Call Forward for your telephone, press #620. Confirmation
tone (three short tones) and display shows “DATA PROGRAMMED.” This
indicates the data is set.
To turn off System Call Forward for your telephone, press #621. Confirmation
tone (three short tones) and display shows “DATA PROGRAMMED.” This
indicates the data is set.
Station
Station Call Forward enables you to assign Call Forward destinations for each
extension on your telephone that will override the telephone’s System Call Forward
settings. Each extension can be independently setup to Station Call Forward to a
unique destination. You can set a Programmable Feature Button to perform any Call
Forward function - see “Programming Feature Buttons” on page 116 for more details.
Call Forward must be set prior to receiving the call.
The following calls to your station can be forwarded:
•
Internal calls
• Auto Attendant calls
• Outside lines that ring only your station
• Transferred internal or incoming line calls
50
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Call Forward
Station Call Forward Categories
You can set Call Forward for the following categories of calls. Within these
categories, you can use five different types of Call Forward Settings (as detailed in the
next section).
•
Call Forward Any Call – Forwards any call, whether an internal call or incoming
line call.
•
•
Call Forward - Incoming Line – Forward incoming line calls only.
Call Forward Any Call - Set for Another Station – Enables you set forwarding
of all calls for another telephone within your telephone system.
•
Call Forward - Incoming Line Set for Another Station– Enables you to set
forwarding of incoming line calls for another telephone within your telephone
system.
Notes
•
Call Forward Any Call and Call Forward-Incoming line can be set simultaneously
on a telephone. This allows incoming lines calls to be forwarded to a different
destination than all of the other types of calls.
•
•
Call Forward destinations can be set to internal destinations or an outside
telephone number.
You can change your forwarding destination from outside the system using the
DISA feature. See your System Administrator for DISA telephone numbers and
security code access.
Call Forward Settings
•
Call Forward All Calls – Forwards all calls immediately.
•
Call Forward Busy/Do Not Disturb – Forwards calls immediately when your
extension is busy or in Do Not Disturb (DND) mode.
In Tone-first systems with multiple lines, Call Forward Busy forwards calls only
when all line appearances are in use. In Voice-first systems, Call Forward Busy
forwards all calls any time your telephone is in use.
•
•
•
Call Forward - No Answer – Forwards unanswered calls after a preset number of
rings. The preset number of rings can be set on a per user basis.
Call Forward Busy/Do Not Disturb/No Answer – Forwards all calls when you are
busy, in DND mode or when you don't answer a call within a preset number of rings.
Call Forward Cancel – Cancels the set Call Forward feature. Notice that each
category of Call Forward has a different code for canceling.
Strata CIX IP5000-series Telephone UG 07/09
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Call Forward
Table 22 on Page 171 contains Call Forward Button sequences. You can do a Call
Forward function by entering the button sequence as described or by programming a
Programmable Feature Button to perform the sequence. See “Programming Feature
Buttons” on page 116 to program a Programmable Feature Button.
To use the Call Forward button sequence
Follow the instructions in Table 24 on Page 176, shown under the “Button
Sequence” heading. Some features require additional input, such as:
•
Dest. Ext. or Telephone No. – Call Forward destination numbers can be
internal extension numbers or outside telephone numbers. If the destination is
an outside number, enter the access code used for dialing out (such as 9) + the
telephone number + #. The CIX accepts destination numbers of up to 32 digits.
•
•
before forwarding the call. (This is the Call Forward-No Answer timer.)
Call Forward Pass Code – A four-digit Call Forward pass code can be setup
by your System Administrator and will allow one station to activate the call
forward setting for another station. Users must enter the Call Forward pass code
for the station to be forwarded.
Note In Table 22 on Page 171, (tone) refers to three short tones used as a
confirmation tone and will play at that point in the sequence to confirm your
input was accepted.
To program call forward button destination
1. On the phone that has the Call Forward button, press the PDN button.
2. Dial #9876 to enter programming mode.
3. Press the Call Forward button.
4. Enter in the destination and end with a #.
5. Press the Call Forward button and you will hear two quick beeps. If you hear single
beep go back to step 3.
6. Go off hook and back on hook.
52
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Call Forward
Call Forward Examples
To set your telephone to Call Forward Busy-No Answer to an internal extension
number
Press your extension button + #6041 + 3000# + 10
#6041 = Call Forward Access Code sequence
3000# = Internal Extension Number
10 = Ring time in seconds before Call Forwards
To set another telephone to Call Forward Busy-No Answer to an outside
destination number after a set time
Press your extension button + #6042 + 1234 + 1111 + # + 9 +1 949
5873000 + # + 08
#6042 = Call Forward Busy No Answer Access Code sequence
1234 = Other telephone’s extension number
1111 = Call Forward Passcode for other telephone + #
9 = Outside Line Access Code
1 949 5553000 = 1 + Area Code + Telephone Number
# = Must press after entering an outside destination number
08 = Ring time in seconds before Call Forwards
Strata CIX IP5000-series Telephone UG 07/09
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Call History
Call History
Incoming calls with Caller ID or ANI information can be optionally recorded into a
rolling list for the station where the call is ringing. The call is placed in the list along
with the number, name (if provided), time and date of the call, and status of the call
(answered, abandoned, or redirected). You can access this list from an LCD telephone
with a flexible Caller ID button.
To view Call History
When your station is idle, press the Caller ID button. The Caller ID LED lights
green and the latest record displays.
Press Vol for the next record; press Vol for the previous record.
To view the call date, time and status, press SK2 (press again to toggle to call
name/number).
54
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Call Park Orbits
Call Park Orbits
The Call Park feature enables you to hold a call temporarily in a location other than
your telephone. These areas are called orbits. You or another telephone user can
retrieve a parked call from its orbit by specifying the orbit number. You can specify
one of 20 General Park Orbits (7000~7019) or a valid extension number within the
system.
Once you have parked a call in an orbit, you can:
• Hang up and retrieve the parked call at a later time
•
Originate another call
• Access a voice paging device to announce the parked call for pickup from another
station
If you park a call and it is not retrieved, it will recall to the parking station and one of
the following occurs:
•
If your station is idle when the system Call Park recall timer expires, the parked
call automatically recalls to your station.
•
If your station is busy, the parked call camps on.
If you have an LCD telephone, you can let the system automatically select an
available orbit number which displays on your LCD.
To park a call
1. While on a call, press Park in Orbit or press Cnf/Trn + #33. The LED flashes
green (consultation-hold). If you were on an extension during the call, and you
have line button on your telephone, the line LED will flash until the call is picked
up (depending on programming).
2. Specify the Park Orbit using one of the following:
•
Press and the system automatically selects a General Park Orbit between
7000~7019. The chosen orbit appears on the LCD.
*
•
•
Enter a valid extension.
Press # and the system automatically selects your extension as the orbit.
3. Hang up. The caller’s extension or line number and the orbit number are shown. If
the parked call is not retrieved within a specified time, the call rings back to your
telephone. When a parked call recalls your telephone, the LCD shows the line or
extension that is recalling and the orbit number.
Strata CIX IP5000-series Telephone UG 07/09
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Call Pickup
To retrieve a parked call
1. Press Park in Orbit or press your extension button + #32.
2. Enter the Orbit Number where the call is parked or # for the extension from which
you are calling. You cannot use to retrieve a parked call. The extension LED
*
flashes at the in-use rate when the call is retrieved.
Call Pickup
You can pick up a call that is ringing another station’s extension, a call placed on hold
at another station and other types of calls. When you pick up an internal call, the
calling station and the called station displays on your LCD.
Group Pickup
Two or more stations can be assigned to a pickup group, there are a total of 32 pickup
groups available. You can easily pick up ringing calls on other extensions. Ringing
calls include: new, transferred, internal, or external calls. You will have the ability to
pick up calls for other extensions in your group and other groups as well. See your
System Administrator for group assignments.
Ringing, Page or Held Call Pickup
This feature picks up ringing or held calls, including Group Page and All Call Page
calls. If these types of calls occur at the same time, the pickup priority is station-to-
station and then Page calls in the order of occurrence. In some systems, this feature
can be applied to pick up All Call Page exclusively.
56
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Call Pickup
To perform Call Pickup
Press the buttons shown in the table below for the desired Pickup feature.
Table 8
Call Pickup Feature Codes
Ringing or
Page Calls
Press Ext. Button, then dial the
access sequence below:
To Pick Up:
A call ringing or held at the Extension Number.
A call Ringing, held or parked at the Ext. No.
A call ringing a member of your pickup group.
A call ringing on any line of this Primary Ext. No.
A call ringing an extension in this Pickup Group.
#5#6 + Ext. No.
#5#29 + Ext. No.
#5#34
Directed DN
Group
Directed Ext.
Directed Group
#5#5 + Primary Ext. No.
#5#32 + Group No.
A call ringing this Ext. No. only. Other lines ringing
on the same phone are unaffected.
Ext. No.
#5#22 + Ext. No.
#5#9
Outside Calls
Any incoming outside line call.
#5#36 + Page Zone No. (01~08)
All Call, Group,
and/or External
Page
An All Call Page, Group Page and/or External Page
by Page Zone or by a specific Ext. No.
#5#5 + Ext. No. of another phone
being paged.
Press Ext. Button, then dial the
access sequence below:
Held Calls
To Pick Up:
#5#71
Local Retrieve
A call held on this telephone.
Remote Retrieve
A call held on another Primary Ext. No.
#5#72 + Primary Ext. No.
A call held on this outside line only, regardless of the
phone that placed the call on hold. Must enter a three
digit outside line no. (e.g., 007).
Outside Line
Retrieve
#5#73 + Outside Line No.
(001~128)
Directed Ext.
Retrieve
A call held on for this Ext. No., regardless of where
this Ext. No. appears.
#5#74 + Ext. No.
Notes
•
The Primary extension number is the directory number by which the telephone set
is defined. Other, non-primary extension numbers may also appear on the
telephone. By convention, the Primary extension number is assigned to the first
button (on the bottom left-hand side) of a multi-button telephone.
• If more than one call is on hold, the call on the telephone’s lowest button number is
picked up.
• Ringing calls are picked up over held calls as a priority.
Strata CIX IP5000-series Telephone UG 07/09
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Call Transfer
Call Transfer
Call transfer allows a call to be directed from one telephone to another on the CIX.
External transfers to telephone numbers or network extensions off the CIX are also
supported, please check with your System Administrator to see if this is enabled.
There are two types of call transfer:
•
Blind transfer – The call is directly transferred to another extension without
announcing the call or waiting to see if the caller is available.
•
Supervised transfer – The call is “supervised” during the transfer process so the
call can be announced to the receiving party before completing the transfer. A
supervised transfer also allows the person originating the transfer to take back or
cancel the transfer.
To perform Call Transfer Immediate
1. While on a call, press the TRNS Soft Key.
2. Dial the extension where you wish to transfer the call.The call rings the destination
station and your telephone returns to the idle state. If your telephone does not go
idle, the destination may be located in a remote node, so you need to hang up to
return to idle state.
To transfer using the Cnf/Trn button
1. While on a call, press Cnf/Trn. Your Line LED flashes green and you hear internal
dial tone.
2. Dial the extension where the call will be transferred. You can remain on the line
and announce the call or hang up to complete a “blind transfer.”
Note If the privacy option has been disabled, then if you use a Line button when you
transfer the call, the LED will flash red until the receiving party answers. While
the LED is flashing, you can press the Line button to return to the call. If the
receiving party answers the call, the LED turns solid red and you cannot
reconnect to the original caller.
During call transfer, you can connect all three parties by pressing the Cnf/Trn
button or by pressing the JOIN soft key. This allows the three parties to talk
together.
3. Transfer with Camp On: If the station to which you want to transfer the call is busy,
you may hang up and the transferred trunk or station will be camped on to the busy
destination.
58
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Call Waiting
To transfer a call directly to Voice Mail (VM)
1. While on a call, press Cnf/Trn.
2. Enter #407.
3. Enter the VM mailbox number (usually the same as the extension number) + #.
4. Hang up and the caller is connected to the VM mailbox. This feature does a blind
transfer to VM.
To transfer a call directly to VM with a DSS button
1. While on a call, press Cnf/Trn.
2. Press the DSS button programmed to the voice mail number.
3. Hang up and the caller is connected to the VM mailbox.
Call Waiting
You can answer a call that is transferred to your station, even when your station is
busy. When another call is camped onto your station, you hear two Camp-on tone
beeps and the extension or Line LED flashes red (on-hold).
If a call is sent to your station when busy, and your station does not have an extension
button available to receive the call, two camp-on tone beeps are sent to your
telephone. You must disconnect or transfer the existing call to answer the waiting call.
To answer a waiting call by placing the current call on hold
Press Hold. The existing call is placed on hold. The camped-on line rings your
station (the Line LED flashes green - incoming call)....or if your telephone has the
Auto Hold feature, just press the flashing extension button.
You are connected to the transferred call. The extension or Line LED flashes green
(in-use).
Note See your System Administrator to find out if you have Auto Hold.
To answer a waiting call by disconnecting or transferring the current call
Hang up or transfer the existing call; the camped-on call rings your station. The
camped-on line rings your telephone and the Line LED flashes green (incoming call).
...or press the flashing extension or Line. The existing call is placed on hold. The
camped-on line rings your station (the Line LED flashes green - incoming call).
This disconnects the current call and connects you to the transferred call. The
extension or Line LED flashes green (in-use).
Strata CIX IP5000-series Telephone UG 07/09
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Caller ID
Caller ID
Incoming calls to your extension with Caller ID can be recorded into a rolling list that
is saved on your telephone. The call information is placed in the list along with the
number, name (if provided), time and date of the call, and status of the call (answered,
abandoned, or redirected). You can access this list from an LCD telephone with a
flexible Caller ID button.
To view saved Caller ID information
1. When your station is idle, press the Caller ID button.
The Caller ID LED lights green and the latest record displays.
2. Use the soft keys (Next, Prev, Call or Exit).
Note Caller ID is displayed when a call is first answered and will be displayed for the
first 15 seconds of the telephone call.
Conference Calls
You can conference together up to eight parties (including yourself) - with up to six
parties being external network lines. The actual number of conference parties with
acceptable volume levels depends on the local and far end telephone line conditions.
The person who initiates the conference call is the Master. If, after the conference is
established, the Master exits the conference, the first station to have been added to the
conference becomes the Master.
To conference calls
1. While on a call, press Cnf/Trn. You hear dial tone and your Line LED flashes green.
2. Call another station or outside line.
3. When the called party answers, press Cnf/Trn. If you receive a busy tone or no
answer, press Cnf/Trn again to return to the original connection.
All parties are conferenced. If the second call was placed on a Line that appears on
your telephone, the LED also flashes green.
4. Repeat steps 1~3 until all parties are added or the maximum number of parties is
reached.
Note When the Master of the conference hangs up, the control is automatically
transferred to the first internal station added to the conference call. If no other
internal stations are included in the conference call, the call will be
disconnected.
60
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Conference Calls
To transfer conference control
1. Complete Steps 1 and 2 above to add the line to which you wish to transfer
conference control. See previous Note.
2. Announce the call and hang up to transfer it. This station now becomes the
conference Master with the ability to add or delete parties.
To hold a conference call
If you are the Conference Master, press the Hold button once (or twice for
Executive Hold) to place the conference call on hold. The other parties can
continue with the conference. Music-on-hold is suppressed and your extension
LED flashes green. You can rejoin the conference at any time by pressing your
extension button. When you return, you retain Master status.
Adding Voice Mail to a Conference
The Conference Master can add voice mail to a conference. This feature enables
participants in a conference to listen to or leave a voice mail message during a
conference call.
To add Voice Mail to a conference call (performed by Conference Master)
1. Press Cnf/Trn to place the current call on Consultation Hold.
2. Dial the voice mail (VM) extension number, then enter the VM mailbox and
security code. This adds the voice mailbox to the conference.
3. Press Cnf/Trn to reconnect to the original party. (You can continue to add
conference members by pressing Cnf/Trn and dialing another extension.)
Now, all parties in the conference can listen to or record a message to this voice
mailbox. Only the Master can control the VM with touchtones or Soft Keys.
Strata CIX IP5000-series Telephone UG 07/09
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Conference Calls
Supervising a Tandem Call
1. While talking on an outside call, press Cnf/Trn. You hear dial tone. The extension
LED flashes (conference rate).
2. Dial an outside telephone number.
3. After the party answers, press Cnf/Trn. The extension LED flashes (in-use rate)
and all parties are conferenced.
If you receive a busy tone or if the station does not answer, press the flashing
extension button to return to the original connection.
4. Press Cnf/Trn and hang up. The extension LED flashes (exclusive-hold rate) and
the two lines are connected. The LED turns Off when the parties hang-up.
5. To supervise a tandem call, press the extension button. If the parties have finished,
hang up...or if the parties are still talking, press Cnf/Trn and hang-up. Both Line
LEDs turn Off and the connection is released.
If your telephone company provides automatic disconnect supervision, the
connection will release automatically when the parties hang up. If not, the lines
must be supervised to be disconnected.
Conference Add/Split/Join/Drop
If you initiate a conference with two or more parties, you can continue to add outside
callers to conference; or you and another member of the conference can leave (Split)
the conference for a private conversation. During this time, other conference members
remain connected.
You can then Join both of you back into the conference, or you can Drop (disconnect)
the member you are connected to. This feature is performed with Soft Keys if you
have a LCD phone or with a Split button programmed on one of your Programmable
Feature Buttons.
This feature also works for remote stations which are connected through Strata Net
QSIG.
Important! You must be a conference master to perform the Add, Split and Drop
features. The conference master is the person that initiates the
conference call. If that person drops from the conference, the first
person added to the conference becomes the conference master.
62
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Conference Calls
To add an Incoming call to the Conference
1. Place the first caller/Conference on hold.
2. Answer the incoming ringing call.
3. While speaking to the incoming caller, press Cnf/Trn button.
4. Press the blinking DN where the first caller/Conference was placed on hold.
5. Press Cnf/Trn twice to join all parties together.
To Split from a conference
1. While in a conference call on an IP5000-series phone, press the SPLT (Split) soft
key or Split button.
2. Press the NEXT soft key until you see the extension number for the party that you
want to Split out of the conference.
3. You can return both yourself and the other Split party back into the conference by
pressing JOIN.
RTRN terminates a feature operation and returns to the previously displayed state.
To Drop the Split party from a conference
Press the DROP Soft Key. The party that you are talking to privately (the party
which you have Split from the conference) will be disconnected (Dropped) and
you will rejoin the conference.
If you are in a three-way conference and Split with one of the parties, the
remaining party will essentially be “on hold” until you return to the conference.
Strata CIX IP5000-series Telephone UG 07/09
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Direct Inward System Access (DISA)
Direct Inward System Access (DISA)
Outside callers with touch tone telephones can call in to lines programmed for Direct
Inward System Access (DISA) and dial an extension or outgoing line without going
through an attendant or operator. Check with your System Administrator to see if this
features is available for your telephone.
1. From outside the system, dial the public telephone number assigned to DISA. The
call will be answered and you will hear system dial tone.
If you do not dial within 10 seconds, the line disconnects.
2. When you hear dial tone, dial an extension or an outside line.
3. If you dial an outside destination, you may need to enter a security code provided
to you by the System Administrator. When you hear the tone, enter the security
code. If accepted, the call will proceed.
4. If you receive busy tone and you want to dial another number while the station is
still ringing, press and repeat Step 2.
*
Direct Station Selection Buttons (Hotline)
This optional feature enables you to use a DSS button to connect directly to another
station’s line extension. The DSS LED shows the status (idle/busy) of the station and/
or the station’s primary extension. For example, a station’s DSS button LED shows
busy (light steady red) when the station is:
• busy on a call on any button
• idle but all appearances of the station’s extension are in use by other stations.
When the station is in DND, the LED flashes red.
To connect directly to another station’s extension
1. When connected to a line or another station, press DSS.
The original party is put on-hold. You can call a station even if the DSS LED
shows busy (steady red).
2. Announce the call...or transfer the call by hanging up or pressing Release.
Note You can transfer the call to an idle or busy station.
64
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Do Not Disturb
Do Not Disturb
If your station is in Do Not Disturb (DND) mode, internal, external and transferred
calls do not ring your station and Off-hook Call Announce calls are denied. You can
continue to make calls while in the DND mode. When originating a call in DND
mode, you will hear a short burst of interrupted dial tone followed by continuous dial
tone. You can start dialing at any time during either tone.
If you put your Primary extension into DND mode, all calls to that telephone are
rejected. If your extension is set for Call Forward-Busy or Call Forward-Busy/No
Answer, the call is redirected to the forwarding destination immediately.
If you put an extension other than the Primary extension into DND, only calls to that
extension on your telephone will be blocked. Appearances of that extension on other
telephones continue to ring.
To activate DND on your Primary extension
Press Do Not Disturb or #6091 (hear Success Tone). The LED lights steady red
and DND mode is activated for the entire station.
To activate DND on a non-Primary extension
Press the desired extension appearance and Do Not Disturb or #6091 (hear
Success Tone). The LED lights steady red and DND mode is activated for that
extension on your telephone.
To deactivate DND
Press Do Not Disturb or #6092 (hear Success Tone). The LED lights goes out
and DND mode is de-activated.
Strata CIX IP5000-series Telephone UG 07/09
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Door Lock(s)
Setting DND for Another Extension
To activate DND for another extension
Enter #6191 (hear Entry Tone) + the Primary extension of the remote extension +
the pass code + # (hear Success Tone). This sets DND as if activated by the
Primary extension on the target telephone.
To deactivate DND for another extension
Enter #6192 (hear Entry Tone) + the Primary extension of the remote extension +
the pass code + # (hear Success Tone). This removes DND from the target
telephone.
To change your DND Pass Code
Enter #670 (hear Entry Tone) + ext. no. (hear Entry Tone) + old pass code + #
(hear Entry Tone) + new pass code + # (hear Success Tone).
If you activate DND while a call is ringing, the ringing stops. The LED continues
to flash on your telephone and ring on other appearances.
Door Lock(s)
If you have locked doors in your facility that can be controlled through the Strata CIX
system, you may be able to unlock these doors by using your telephone’s Unlock Door
button(s). The Unlock Door button(s) is programmed to unlock a specific door.
Check with your System Administrator to find out the locations of your system’s door
phones and record them below.
Door Lock No.
Location
Door Lock No.
Location
0
1
2
3
4
5
6
7
8
9
10
To unlock a door
Press the specific Unlock Door button or #12 + the Door Lock Number (see
above table). The door unlocks for three~30 seconds (set in system programming).
The Unlock Door LED is lit while the door is unlocked.
66
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Door Phone(s)
Door Phone(s)
Door phones can be used to call phones selected in system programming. When a door
phone calls, you hear a distinctive ringing tone, one or five times (set in system
programming). You can also call a door phone and monitor the surrounding area.
LCD telephones display the door phone name ID when calls are made to or from door
phones.
The number of possible door phones varies by Strata CIX system, 01~24 maximum
for larger systems. Check with your System Administrator to find out the names and
locations of your system’s door phones and record them below.
Door Phone
Name/Location
Door Phone
Name/Location
To answer a door phone call
When you hear a door phone call ringing, lift the handset or press the ringing
button. A door phone call sounds like chimes (high/low). The extension LED
flashes green (in-use) and you are connected to the door phone.
...or to pick up door phone calls ringing someone else’s telephone, press your
extension + #5#5 + directory number of the ringing phone.
Strata CIX IP5000-series Telephone UG 07/09
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Echo Cancellation
To call/monitor a door phone
1. With the handset off-hook, press an extension button. You hear dial tone and the
LED flashes green (in-use).
2. Press #15 (hear three tone bursts), then enter the door phone number (01~24,
depending on system size). A two-way talk-path exists between your telephone
and the door phone. The door phone will not ring. You can audibly monitor the
area around the door phone.
To call from a door phone
1. Press the door phone button and then release it. You hear a distinctive ringing
tone–one or five times (set in system programming).
2. When answered, speak at a normal voice level in the direction of the door phone.
Echo Cancellation
If you hear echo on your IP telephone, tap either Vol or Vol once to cancel
the echo.
Emergency Call
To make an emergency call, dial 911 or Access Code + 911. This depends on
off-hook preference set up for your telephone.
Note Check with your System Administrator for the Access Code because this code
may be different from the one used to get an outside line.
Emergency Monitoring Station
Your system may have one IP telephone assigned as an emergency monitoring station.
If your telephone has this assignment, your line LED will flash green when someone
makes a 911 call. When you answer the call, you can listen in and participate in the
conversation. See your System Administrator for more information on this feature.
68
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Emergency Ringdown
Emergency Ringdown
If a station remains off-hook for a programmable period, it can be automatically
treated as an Emergency Call and directed to an emergency destination. The station
may have partially dialed a number or have dialed no digits at all. Each station is
programmed with its specific emergency ringdown destination.
A station number or a group pilot number can be specified as an emergency ringdown
destination. In a private network, the station or pilot number must be in the same
network node. Remote emergency destination and door phones are not permitted.
Language Codes
This feature enables you to change the language sent from the Attendant Console or
from a PC. See your System Administrator to find out if your telephone is
programmed with the ability to change languages.
To change the Language Display
Enter the Change Language access code #495 + the Language Code (see below).
1: English date format – MM/DD (/YY)
2: British English – DD/MM (/YY)
3: French – DD/MM (/YY)
4: Spanish – DD/MM (/YY)
Strata CIX IP5000-series Telephone UG 07/09
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Message Waiting
Message Waiting
Message Waiting is shown on the Msg button which will flash red when there are
messages waiting. The waiting message indicators can come from the voicemail
system or they can be internal messages sent from other extensions.
The messages from other extensions are notifications that someone has called your
extension and wants you to call them back.
An extension can receive up to three Message Waiting indications, one additional
indicator will always be reserved for the voicemail system.
Note If there are Phantom DN's (PhDN's) programmed on an extension, each PhDN
can receive up to three message waiting indicators.
Responding to a Lit Msg LED
1. Press Red flashing Msg button. The telephone will dial the message source (the
voicemail or another extension). See Note below.
2. When call is finished, hang up and the message waiting indicator will be cleared.
3. If the Msg LED continues to flash, there are additional messages to check, repeat
steps 1-2.
Voicemail devices have a short delay in turning off the message waiting indicators.
To manually turn off the Msg LED, press your extension button, then enter #409.
Repeat this sequence until all the messages are cleared.
Notes
•
If there is a + on the LCD, press the Next Soft Key to scroll through the messages
sent to that extension.
•
To see who has sent you messages, or to retrieve the messages, press the flashing
Msg button.
70
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Message Waiting
Turning On/Off MW LED on Another Extension
When an extension is called, the calling party can choose to send a message to the
called party. This is a notification to say that a call has been missed and the calling
party would like to be called back.
By sending a message to another extension you turn on their Msg LED.
1. Dial an internal extension. You may hear ringing or busy tone.
2. Press Msg or 7. The Msg LED flashes red on the called telephone. At your
telephone, the Msg LED lights steady red and the LCD shows the station number
where the Message Waiting light was sent to.
If you decide to cancel the Message Waiting light at this point, press Msg or 7
again while ring-over tone is playing and the light will be cancelled, or if you want
to cancel the message later, call the telephone you set the message on and press 7
twice.
3. Press Spkr. Your Msg LED turns Off. The Msg LED on the called telephone
flashes until the called party presses the flashing Msg button which calls you back.
4. Turn off the Message LED.
The two ways to turn Off a Message LED are
Method 1
1. Press #64 plus the extension number that has the message light set.
2. Press Spkr or hang up to end the call.
Method 2
1. Dial the extension that has the Message LED on.
2. Press 77
3. Press Spkr or hang up to release your telephone.
Strata CIX IP5000-series Telephone UG 07/09
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Microphone Cut-Off
Microphone Cut-Off
This feature prevents callers from monitoring the sounds near your telephone when
your telephone receives a Handsfree Call or cuts-off the telephone microphone while
on a speakerphone call. When the feature is ON, the Microphn Cut-off LED lights
steady red and the Mic and Spkr LEDs do not light when your telephone is called.
When the feature is OFF, the Microphn Cut-off LED is not lit and your microphone
works. The Microphn Cut-off functions on Handsfree Answerback and speaker
OCA calls for privacy.
To turn the microphone ON/OFF
Press Microphn Cut-off to toggle between ON/OFF.
72
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Off-hook Call Announce
Off-hook Call Announce
Off-hook Call Announce (OCA) enables you to complete a call to a busy telephone.
Your telephone must be programmed to either announce automatically or to announce
after you press a button on your dial pad. The destination telephone must be
programmed to accept an OCA. The announcement may be delivered over the handset
or the speaker.
Handset OCA can operate on any digital telephone. Speaker OCA requires the
addition of a special circuit board inside the speakerphone.
To make an OCA call
Manual – Dial an extension. When you hear busy tone, press 5 and, after one long
tone, you can talk through the speaker of the destination telephone. The person you
are calling has answering options described below.
Automatic – If your telephone and the extension you are calling have been
programmed for Automatic OCA, you can talk through the speaker of the
destination telephone without hearing the busy tone and without dialing 5.
To answer a Handset OCA call
While you have a call in progress, you hear one tone in your handset to indicate that a
second station is calling.
Press Msg button to toggle between the new or original caller. Press and release
the Msg button to talk to the new caller, then press and release the Msg button
again to return to the original caller.
The PDN flashing rapidly means talking to OCA caller; PDN flashing at a normal,
steady pace means talking to original caller. In both cases, neither caller can hear
the other. Your LCD indicates which station or CO line you are connected to.
To answer a Speaker OCA call
1. While you have a handset call in progress and you hear one tone, this indicates that
a second station is calling. The second caller connects to the speaker in your
telephone. The Spkr LED flashes and the Mic LED lights. You will be speaking to
the first caller through your handset and the second caller through the microphone.
2. To turn off your microphone speaker to the second party, you can press Mic or
Microphn Cut-off; the Mic LED turns Off. You will no longer be talking to the
second caller, although he/she can still speak through your speaker.
3. Press Mic or Microphn Cut-off again to reconnect to the second caller. You can
toggle as often as you choose. If you do not want the first caller to hear your
conversation with the second caller, cover the mouthpiece of your handset.
Strata CIX IP5000-series Telephone UG 07/09
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Override Calls
Override Calls
The available override features are:
•
•
•
Busy Override
Do Not Disturb Override
Executive Override
• Destination Restriction/Traveling Class Override
Class of Service Override
•
• Privacy Override
Busy Override
Ring Over Busy Override enables you to send a muted ring tone to a busy station to
indicate a call is waiting. The Busy Override (BOV) muted ring can be programmed
for each station to be two muted rings only or continued muted rings until the call is
answered. This option applies to the station receiving the muted ring. The muted ring
can be sent to the telephone speaker or to the telephone handset/headset and speaker.
To use Busy Override
After reaching a busy station, press 2. A muted tone is heard at the busy station,
indicating that a call is waiting. The station number displays.
Do Not Disturb Override
Do Not Disturb (DND) Override lets you send a call waiting tone or ringing to a
station in DND mode to indicate that a call is coming in. Your telephone may be
programmed to block DND Override from other telephones. Your station’s LCD
shows the station you have called is in the DND mode.
OCA is possible to DND stations from stations that are programmed for DND
Override.
To use DND Override
After reaching a station in DND mode, press 2. A tone signal is heard at the DND
station, indicating a call is coming in. On your station, the LCD shows the station
number you have overridden.
Your LCD displays DND OVR DENY, if the station you called denies DND
Override.
74
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Override Calls
Executive Override
Executive Override enables you to enter an established conversation. Your telephone
can also be programmed to block Executive Override from other telephones.
To perform Executive Override
After reaching a busy station, press 3
...or, if you have an LCD telephone, use the OVRD Soft Key.
You enter a conference with the busy station and the party to whom he was talking.
The called parties may hear an optional tone signal prior to your entering the
conversation.
Your LCD displays EXEC OVR DENY, if the station you called denies Executive
Override. If you do not have Override privileges, you will camp on.
Destination Restriction/Traveling Class Override
Enables a station user to override the Destination Restriction or Traveling Class of a
particular telephone by entering a pre-determined account code.
To use Destination Restriction or Traveling Class Override
1. Press 471. Confirmation tone plays and the LCD shows “Enter OVR Code.”
2. Enter the trunk access code or LCR access code.
3. Dial the external telephone number.
Class of Service Override
By dialing a Class of Service (COS) Override code, a user can change a station’s set of
privileges to one associated with the override code. When the call is terminated and
another is attempted from the same station, the original COS is applied. This allows
selected users to override restrictions that are placed on any telephone in the system.
To perform Class of Service Override
1. Access a Primary or Phantom DN. You hear dial tone and the LED flashes at the
in-use rate.
2. Press #471. Dial tone stops. Your LCD prompts you to enter a code.
3. Enter the COS Override Code (four digits). You hear dial tone.
4. Dial a telephone number.
Note For security reasons, the override codes are only available on a selected basis.
See your System Administrator.
Strata CIX IP5000-series Telephone UG 07/09
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Paging
Privacy Override
telephone. Up to two station users can enter an existing Central Office (CO) line-to-
station call (i.e., up to three stations can be connected to a CO line). You can also use
this feature if the station that is already connected to the CO line is in the Privacy
Release mode.
Station users with Privacy Release can allow stations with the shared button
appearance to enter their conversations, even if the station entering the conversation is
not programmed for Privacy Override. (see “Privacy” on page 78.)
Paging
Station users can make page announcements to telephones and external speakers.
Check with your System Administrator to find out the zone numbers for various
paging groups.
To make a Page Announcement to telephones or external speakers
1. Lift the handset, press your extension button and enter a paging access code.
2. Make your announcement, then hang up.
To make a Group Page
Press Group Page and enter the Group number (01~16)
...or press extension + #31 and enter the zone number.
Answering a Page
To answer a Group Page, lift the handset off-hook, dial #5#36 and enter the Page
Zone number (01~08, depending on your telephone system).
To answer an External Page Zone, lift the handset off-hook, dial #5#36 and enter
the Page Zone number (01~08, depending on your telephone system).
76
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Paging
All Call Page
You can make an All Call Page to telephones assigned to the “All Call Page Group.”
Stations are assigned to the “All Call Page Group” in system programming.
To make an All Call Page
1. With the handset off-hook, press All Call Page
...or dial #30. This pages all telephones in the All Call Page Group but, depending
on system programming, you may or may not page external speakers.
2. Make your announcement then hang up.
To answer an All Call Page
1. Lift the handset off-hook, dial #5#36.
2. Enter the Page Zone Number (01~08, depending on your telephone system).
Emergency Page
An Emergency Page overrides Group Pages or All Call Pages to telephone and
external paging devices.
To make an Emergency Page, lift the handset off-hook, dial #37.
To make an Emergency Page to a group, lift the handset off-hook, dial #38 and
enter the Group number.
Strata CIX IP5000-series Telephone UG 07/09
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Privacy
Privacy
Privacy controls the ability of more than one person to use the same extension or CO
line at the same time. Privacy applies to multiple appearances of extensions, Phantom
extensions, outside Lines and outside Line Group buttons. The application of Privacy
to individual telephones is controlled in system programming.
By default, the system is private. If you are in a conversation, another telephone with
an appearance of the line on which you are talking cannot intrude unless that
telephone has been programmed for Privacy Override. In that event, the other
telephone may enter and leave the conversation at will. If all users are provided with
Privacy Release in Class of Service, the system will function as non-private.
Your telephone may be equipped with a Privacy Release and/or a Privacy on
Line button. On a normally private telephone, Privacy Release allows other
appearances of you line to join the conversation. On a normally non-private telephone,
Privacy on Line allows you to exclude others. The Privacy condition may be
toggled at any time during a conversation. At the end of the conversation, the line’s
privacy condition returns to its original state.
To use Privacy Release
While on a CO line call, press Privacy Release. The LED lights red. The
outside line flashes at all appearances. When another station user enters the outside
line call by pressing a common outside Line, the Privacy Release LED turns Off.
To add a third station, press Privacy Release again; the process repeats.
To set/cancel Privacy
Press Privacy on Line to set privacy. The LED lights steady red. Others are
blocked from entering your outside line calls when they press a common Line
...or press Privacy on Line again to cancel the feature. The LED turns Off.
Redial
Use this button to redial the last number dialed from your telephone.
To redial the last number, press Redial or 0.
*
78
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Speed Dial
Speed Dial
Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a shorter code.
Dial sequences can include telephone numbers, authorization codes, passwords
feature activation codes and pauses. Speed Dial may be used to originate a call or
invoked after a call is established. There are two types of Speed Dial:
•
•
System SD – All telephones in your system can share a list of up to 800 System
Speed Dial numbers under the exclusive control of the System Administrator. In
be allowed to dial directly from your telephone.
Station SD – Your System Administrator allocates a block of up to 100 personal
SD numbers (10 per telephone). You have exclusive use of them and you can
create and change them from your own telephone.If you have a 9-Line LCD
telephone, you can assign names to your station SD numbers to appear on the
Personal SD Directory display (see your System Administrator or use the
procedure for “Storing Personal Speed Dial Names” on page 82.)
To use personal Speed Dial
1. See your System Administrator to check how many personal Speed Dial numbers
are allocated to your telephone and if you have Speed Dial capabilities enabled on
your telephone.
2. Setup / Store your personal Speed Dial numbers.
3. Assign names to personal Speed Dial numbers (on supported models).
Making a Call Using Speed Dial
There are two ways to begin a Speed Dial Call.
1. Press Spdial on a IP5000-series digital telephone
...or press the button on any telephone.
*
2. Dial the Station or System Speed Dial Number. Station Speed Dial numbers
occupy numbers 100~199. System Speed Dial numbers occupy numbers 200~999.
Strata CIX IP5000-series Telephone UG 07/09
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Speed Dial
Table 9
Feature
Speed Dial Access Codes
Feature Access Code Sequences
Speed Dial (Dialing an SD number)
2
Spdial + nnn
1
Station
nnn = 100~199 Station SD numbers
2
Spdial + nnn
1
System
nnn = 200~999 System SD numbers
1. Stations must be assigned/enabled Speed Dial capabilities in system programming by an Administrator in
Program 200-30 (System SD) and Program 200-35 (Station SD).
2. If your telephone does not have a Spdial button, press the button, then dial the three digit
*
Speed Dial bin number (nnn).
Storing a System/Station Speed Dial Number
2. Dial the Station Speed Dial number (100~199) or System Speed Dial number
(200~999). The LCD shows your digits and you hear Entry Tone.
3. Dial the telephone number to be stored + #. Include any required access and area
codes. The LCD shows “SPEED DIAL” + the Speed Dial Number + destination +
#. You hear Success Tone.
4. Lift handset.
5. To enter another number repeat steps 1-4. Refer to Table 10 below.
Example: To store a Station Speed Dial number to Speed dial location 100, dial
#66 + 100 + 99495833000 + #
Table 10
Feature Access Codes
Feature
Feature Access Code Sequences
Speed Dial (Storing an SD number)
2
#66 + nnn + Phone No. + #
1
Station
nnn = 100~199 SD bin numbers
2
#66 + nnn + Phone No. + #
1
System
nnn = 200~999 SD bin numbers
1. Stations must be assigned/enabled Speed Dial capabilities in system programming by an Administrator in
Program 200-30 (System SD) and Program 200-35 (Station SD).
2. Refer to Table 11 on page 81 to see how to enter and # into a speed dial phone number.
*
80
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Speed Dial
Advanced Speed Dial Operation
Special Characters
SD numbers may include 0~9, #, and Pause. For an example on how to use special
*
characters, see page 119.
Table 11 Phone Number Dial String Characters
Entry
0~9
#
Meaning
0~9
End of Speed Dial Number when entering via access code (#66)
Escape. “ ” functions as an escape key indicating that the number immediately following
*
represents something exceptional. When is used as an escape character, it consumes one
*
*
Speed Dial digit. Entering 7 to insert a seven-second pause would use two of 32
*
characters.
A pause from 1~9 seconds. To pause longer than 9 seconds, enter more pause escape
*
sequences. Example: To insert a 17-second pause, press
pause in the SD number. In this example, you would see “PP.”
*9*8. A “P” displays denoting a
(1 ~ 9)
is entered into the speed dial string.
**
*
#
# is entered into the speed dial string.
*
Long SD Numbers
Up to 32 digits can be stored in one SD location. If you exceed 32 digits, the excess
digits are automatically stored in the next sequential SD location. If SD 100 contains
40 digits, then 8 of those digits would be stored in SD 101. If you save other digits to
SD101 they will over-write the eight digits automatically stored there.
Strata CIX IP5000-series Telephone UG 07/09
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Speed Dial
Storing Personal Speed Dial Names
You can store names with Personal Speed Dial numbers. These names will display as
Soft Keys, that can be used for dialing from the telephone LCD directories.
Notes
•
Speed Dial locations must be assigned to your telephone by your System
Administrator before you can store names. Your System Administrator can also
associate names with Station Speed Dial numbers.
•
Only the Administrator telephone can store System Speed Dial numbers.
To assign Station Speed Dial names
1. Enter User Programming Mode by dialing #9876 or, press Program.
2. Press Spdial. “SPEED DIAL MODE” displays on the LCD.
3. Enter a Speed Dial location number (100~199 for personal speed dial or 200~999
for System speed dial, depending on system programming).
4. Enter the telephone
number to be stored. If
Example:
you normally a dial line
access code (such as 9)
Press the
for “A.”
and/or and area code, enter
the codes before the
telephone number.
Press the
again for “B,” etc.
Refer to the table for other characters.
name that will appear in
the Personal SD directory
(nine characters max).
5859
Notes
You can enter
• To store #, press #
*
alphanumeric characters
from the dial pad (shown
right and in Table 12).
• To store *, press
**
82
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Speed Dial
• To move one character
to the right, press
Table 12
Dial Pad Alphanumeric Characters
Number of times to press
the dial pad button
SCROLL or RIGHT
Soft Key. To add a
space, press the RIGHT
Soft Key twice.
Dial Pad
Buttons
1
2
3
4
5
1
2
3
4
5
6
7
8
9
0
-
A
D
G
J
.
:
,
‘
1
2
3
4
5
6
7
8
9
0
B
E
H
K
N
Q
U
X
)
C
F
I
• To backspace (delete
previous character),
press the PAGE or
LEFT Soft Key.
!
&
*
L
M
P
T
W
(
O
R
V
Y
&
#
S
?
Z
/
•
To cycle back to the first
letter, continue pressing
the LEFT Soft Key.
6. Press Spdial. The Speed
Dial name is now
programmed.
7. Go off hook. The telephone exits User Programming Mode.
8. Test the Personal SD entry by pressing the Personal SD Soft Key. Look for the
name in the entry and press the Soft Key associated with that name.
Strata CIX IP5000-series Telephone UG 07/09
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Time and Date Setting (Local)
Time and Date Setting (Local)
IP telephones will display the time, day and date of the time zone of the telephone
system location it is connected to. If the IP telephone is not located in the same time
zone as the telephone system, the IP telephone can be used to change the time, day and
date of the IP Telephone to the local time zone in which the telephone is located.
To change the Date
From the IP telephone, dial #653 and enter YYMMDD#
Example: To set the date to March 12, 2008.
YY = Year, example 08
MM = Month, example 03
DD = Day, example 12
Note The IP telephone date can only be changed one day before or after the
telephone system date. The day will change automatically when the date is
changed.
To change the time
From the IP telephone, dial #654 and enter HHMMSS#
Example: To change the time to 01:30 PM
HH = Hour, example 13 (range is 00~23, 24 hour clock must be entered)
MM = Minutes 30 (range is 00~60. It must be within 15 minutes of system time.)
SS = Seconds (range is 00~60).
Note The time set must be within 15 minutes of system time.
84
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Tone First / Voice First Signalling
Tone First / Voice First Signalling
To determine the signalling on the telephone circuit.
Tone First Signalling
When the telephone rings and the called party must press Spkr or lift the handset in
order to receive the call.
Voice First Signalling
The telephone does not ring when it is being called, rather a long tone is heard,
followed by the caller's voice coming through the speaker. This method automatically
starts in a hands free mode and allows both parties to speak with each other.
Note The calling party has control over whether Tone First or Voice First Signaling is
being used. The ability to switch between the two is setup by the System
Administrator.
To change the signalling method while placing the call
1. Enter the extension number
2. Press 1 to turn on Tone First Signaling.
3. Press 2 to turn on Voice First Signaling.
Strata CIX IP5000-series Telephone UG 07/09
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Tone/Pulse Dialing
Tone/Pulse Dialing
With some older Central Offices, you may have to make calls on outside lines
programmed for rotary dial pulses. This feature enables you, while on these lines, to
switch to tone dial to access remote equipment (such as an answering machine)
requiring touchtones.
Note With ISDN calls, when Tone Dial Select is pressed, all of the digits entered
after that point will be sent with touchtones.
To change Tone Dialing
1. Access an outside line.
2. Dial a telephone number.
3. While on the call, press Tone Dial Select. Although the outside line is
programmed for rotary dial pulses, access the outside line and dial the telephone
number like any other call described in this user guide.
The Tone LED lights steady red and you are able to send touchtones with your dial
pad. The feature is cancelled when the call is completed.
86
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Uniform Call Distribution
Uniform Call Distribution
Uniform Call Distribution (UCD) provides ACD-like service based on the simplified
Distributed Hunt feature. Incoming calls are answered by Voice Mail as the Auto
Attendant function or they can be directly routed to the UCD (Distributed Hunt) Pilot
number. The caller will dial the UCD Pilot station in response to a prompt. The call
will go to the next agent or, if all agents are busy, the call will camp-on to the
Distributed Hunt pilot and ring-back tone or Music-on-Hold (MOH) will be sent.
This feature distributes incoming calls to available agents. Agents must be logged into
the group to receive UCD calls. The following illustration shows the typical call flow
for this service.
1. Agent logs into the UCD group.
2. CIX receives a call from PSTN or extension.
3. The call is routed to voice mail which provides the initial greeting using the auto
attendant service.
4. The voice mail can be configured to prompt callers to enter the destination number
or to route the call to the pre-determined destination.
5. The voice mail transfers the call to the UCD pilot group.
6. According to the hunting rule (distribute), the call is delivered to an idle agent who
logs in to this hunting group.
If no agent is available in the hunting group, the call is queued to the UCD pilot group.
The caller may hear the Music on Hold (MOH) or Ring Back Tone (RBT) depending
on the configuration. If the call cannot be answered within the preconfigured time, the
call is routed to an overflow destination.
Strata CIX IP5000-series Telephone UG 07/09
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Operations
Uniform Call Distribution
Login/Logout
Login and Logout is controlled by the Login key assigned to the agent phone (see
Strata CIX Programming Manual, Volume 1 for details). The Log status is displayed
on the Login key as shown below
•
•
Login - Key is On Steady
Logout - Key is Off
The Login/Logout feature is applied to the call which terminates to UCD pilot only.
Therefore, the call can terminate to agent Prime or Phantom PDN directly even if the
agent is in Logout state. Also, Login/Logout can be activated by an access code. The
default numbering plan is shown below.
Access Code
#6061
Feature
Login - from Agent Station
#6062
Logout - from Agent Station
Login - Agent Station (DN) from another station
Logout – Agent Station (DN) from another station
#6161 + DN + #
#6162 + DN + #
where DN = the Directory number of the agent station.
88
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
5
The IP5122-SDC telephone looks and functions similar to the 10 Button IP telephone
when connected to the Strata CIX. This phone fully supports all the CIX features and
services of a regular 10 Button IP telephone. However, this telephone can have a
unique feature button called the Analog Central Office (ACO) button to connect
directly to your local Central Office.
Important!
•
•
The telephone must be connected to live AC commercial power or POE
(Power over Ethernet) for CIX system and/or local CO line operation.
Your telephone must be connected to a working local line for local call
operation to function (see Figure 3 on page 99 and “Local CO Line Circuit
Quick Test” on page 100).
•
•
When you press the ACO button, you directly connect to the Central Office
and you will not be able to access any of your Strata CIX system features.
The ACO service has some differences compared to your telephone’s CIX
service. See “ACO Operating Summary” on page 95 for more details.
WARNING! Avoid using an IP5122-SDC connected to a CO Line during a thunderstorm. There
is a possible chance of an electric shock from lightening. Toshiba recommends
disconnecting the CO Line cord from the IP5122-SDC when lightening is forecast.
Strata CIX IP5000-series Telephone UG 07/09
89
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
Making and Answering Calls
Making and Answering Calls
Notes
•
•
The ACO button (FB10) is the top button on the telephone unless it has been
repositioned in programming.
The CIX Extension button is the bottom button on the telephone unless it has been
repositioned in programming.
To make a call from your local ACO service
1. Press the ACO button to receive local dial tone.
2. Lift the handset and dial the telephone number.
To answer an ACO call
Press the ringing ACO button.
To make a Call from your CIX Telephone System Line
1. Lift the handset or press your CIX Extension button to receive CIX system dial
tone.
2. Dial 9 plus an external telephone number.
To make a Call to another extension in the CIX Telephone system
1. Lift the handset or press your CIX Extension button to receive CIX system dial
tone.
2. Dial the extension number.
90
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
Local Emergency Service (Calling 911)
Local Emergency Service (Calling 911)
The key benefit of using this telephone is its ability to dial your local Emergency
service without going through the CIX system.
To dial your local emergency service 911
Press the ACO button first, then lift the handset and dial 911.
Important!
•
If you dial 911 without pressing the ACO button, the CIX system will process the
Emergency service as programmed by your System Administrator. This is
especially important if the CIX system is remote to your IP5122-SDC telephone.
For example, if your IP5122-SDC is in New York and the CIX system is in Los
Angeles, and you do not use the ACO button for the 911 call, the CIX system will
process the call as if you were in Los Angeles.
•
•
An operating local CO line cord must be connected to the “Line” jack on the bottom
of your telephone.
The AC power adaptor (LADP2000-1A or 2A) must be plugged into the live 120
VAC Commercial power that is operating and must be plugged into your telephone;
or your telephone must be powered by operating Power over Ethernet (POE) LAN
connection.
Strata CIX IP5000-series Telephone UG 07/09
91
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
ACO Volume Control
ACO Volume Control
To adjust the handset/headset volume
Press the Vol to increase volume and Vol to decrease volume during the
ACO call.
To adjust the Speaker Receiver Volume
Press ACO button in On-hook Mode, then press Volume Up/Down button to
change the Speaker Receiver volume level.
To adjust ACO Ringing volume
There are two ways to adjust ACO ringing volume:
1. When the ACO button is ringing, press the Vol to increase volume and Vol
to decrease volume.
2. When the IPT is idle, press Hold, then Vol to increase volume and Vol to
decrease volume.
Microphone
Important!
Use only the Handset in ACO mode; Microphone is not available for
ACO conversations in Speaker mode.
92
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
ACO LED and LCD Indication
ACO LED and LCD Indication
Table 13
LED and LCD Indications
ACO Operation
ACO LED Indication
ACO LCD Display
Blank (Off) – if CO is
connected.
Idle
Default LCD display
Red – if CO is not
connected.
In-use or on Hold by other IPTs or
devices.
WARNING! Red can also
indicate that the
Red
Default LCD display
Default LCD display
telephone is not
connected to a
working CO line
ACO Hold
Flashing Green
Flashing Green
LOCAL LINE RINGING
The Ringing LED (located
on top right of the phone) is
Flashing Red
ACO Ringing
USING LOCAL LN: IP-FAIL
FLASH REL
No connection to CIX
Answering ACO
Red or Green
USING LOCAL LINE
FLASH REL
I-use Green blinking
I-use Green blinking
USING LOCAL LINE
FLASH REL
Accessing available ACO
Notes
•
•
Default LCD display is User name, Extension, Month, Date, Day and Time
The Flash and Release (REL) soft keys display only when using the Local line.
You can use the Flash soft key for call waiting answer and/or Centrex feature
access. The Release soft key disconnects the local CO line.
•
When in use or on Hold by other IPT’s or devices, ACO LED indication is Red.
But according to DC characteristic of branched device or branch wiring
condition, IP5122-SDC might not be able to detect In-use of other IPT’s or
devices.
Strata CIX IP5000-series Telephone UG 07/09
93
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
ACO Hold
ACO Hold
You can use the Hold button when using the ACO and CIX service. If you have ACO
button auto-hold enabled in 3-6-9 programming, the following interactions occur. The
default is “No auto-hold.” This default can be changed by performing Step 7 on page
97.
1
Table 14 Auto-hold Enable Interactions
Case
Number
Action / Cases when you press
ACO Button
Reaction
When you are on a CIX call and you
press the ACO button
CIX call is placed on Hold. You can return
to the CIX call by pushing the held call.
1
2
When you are on a Conference call and
you are the Conference Master and you
press ACO button
Conference call is placed on Hold.
When you are on a Conference call and
3
you are the Conference member and you You are cut off from the Conference call.
press ACO button.
Your local CO line is not connected and
No operation, No Dial tone
4
5
you press ACO button.
You are making an outgoing CIX call and
Your outgoing call gets disconnected.
2
you press the ACO button.
While dialing to transfer a CIX call and you The CIX caller is placed on Hold and after
6
7
haven’t completed the dialing and you
press the ACO button.
you have completed your ACO call, the
CIX system will recall you.
When you place a CIX call on Hold and
press ACO button.
The CIX call is in Exclusive Hold.
1. All interactions occur only when you have ACO Auto-hold enabled in “IP5122-SDC Programming”
on page 96.
2. If you have the default of No auto hold then the outgoing CIX call is dropped after pushing ACO key.
ACO call is dropped after pushing another telephone button.
94
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
ACO Operating Summary
ACO Operating Summary
The following is a summary of operating characteristics when using the ACO service
on the IP5122-SDC telephone.
•
Your LCD will not display Caller ID name and number when receiving a call on
your ACO button.
• You do not get CIX tones or CIX LCD displays when you are on an ACO call or
during ACO ringing.
•
The buttons available on an ACO call are: Hold, Spkr, Volume and
Volume buttons, the dial pad, ACO Soft keys, flexible buttons, and ADM/DSS
buttons and Off/On-hook.
Note Flexible buttons (except ACO) will use CIX operation. If you press a Flexible
button when you are on an ACO call, the call will disconnect or go on Auto-
Hold.
•
•
You cannot use the Mic, Msg, Speed dial, Redial, and Conf buttons.
When using the ACO line, you cannot use CIX features such as Call Forward,
Speed dial, Redial, Call Accounting, Toll Restriction, LCR, Account Codes, etc.
•
•
If the IP5122-SDC has power (POE or commercial AC), the ACO line will
function even when there is an IP failure. However, if there is a power failure, the
IP5122-SDC will not work.
If you put an ACO call on Hold, the call will continue to be on Hold even when
other shared IPTs answer or release the call. In this case, the user that placed the
call on hold must access the ACO line again to clear the held call.
• If there is an IP failure, the IPT will not reset if the ACO is on Hold or is in use.
•
When CIX voice calling or paging occurs, the ACO user will not hear the page or
voice announce if he is using the ACO line. After the ACO call is complete the IPT
user will be able to hear the Page or Voice.
• When Background Music (BGM) is activated, the ACO will mute ring your
telephone when a call is received on your ACO button. When using the ACO
button, there is no BGM.
Strata CIX IP5000-series Telephone UG 07/09
95
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
IP5122-SDC Programming
IP5122-SDC Programming
Important! The IP5122-SDC must be programmed, using eManager, as a 20 button
station (Prog. 204). Feature Button 11 (FB11) must be programmed as
a Release button. When the ACO button is pressed the IP5122-SDC
sends Hold and FB11 (Release) to the CIX system.
FB12 ~ FB20 must be blank.
The feature button used as the ACO must be blank (no assignment) in
the CIX data base (Prog. 205).
The programming, shown below, must be done at your IP5122-SDC telephone. This
procedure shows only the programming unique to the IP5122-SDC. For all other
programming functions refer to the DKT/IPT Administrator Guide.
To place your telephone in Programming Mode
1. Press 3+6+9+Hold simultaneously. The LCD displays “PROGRAM MODE” and
“SELECT=”
2. Press 4, then press Hold.
Note Your phone will not ring if it receives a call while in Programming Mode.
Place the phone into programming mode then set the following:
use the Scroll key (SK3) to access FB11 through FB20.
1. Press FB01 – ACO Button position. Enter the button position, then press Hold.
Go to the next Step or, if you are finished programming, go to Step 9.
Enter 1 ~ 10 (Default = 10, FB10)
2. Press FB02 – ACO privacy (Privacy override is not available). Enter the ACO
privacy value, then press Hold. Go to the next Step or, if you are finished
programming, go to Step 9.
1 for No privacy (default) – other IP5122-SDC with the same ACO can access the
CO line while it is in use.
2 for Privacy – other IP5122-SDC with the same ACO cannot access the CO line
while it is in use.
3. Press FB03 – ACO Ringing assignment. Enter the ring assignment then press
Hold. Go to the next Step or, if you are finished programming, go to Step 9.
2 = Ring (Default)
1 = No ring
96
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
IP5122-SDC Programming
4. Press FB04 – Flash timing (100 ms units) (Hook Flash to the CO timing is +/- 10
Step 9. Flash is used to answer Call Waiting and access Centrex features and
should normally be set to default.
1 ~ 20 (Default: 6 (600 ms))
5. Press FB05 – ACO Pad - This affects only the CO Line pad level. This is the same
function as the pad jumper on the CO Line card. The IPT pad levels are set by the
CIX system PAD Table programming. Press Hold. Go to the next Step or, if you
are finished programming, go to Step 9.
2 = 3 dB pad. Set 3dB if the local CO is very close to your telephone connection
causing the audio volume level to be too high.
1 = No pad (Default)
Note During installation, leave ACO Transmit and Receive levels (FB20 and FB19)
at default. Use FB05 to adjust ACO level. If additional adjustment is needed,
then use FB20 and FB19.
6. Press FB06 – Country Code, set to 0 for United States and Canada. Press Hold.
Go to the next Step or, if you are finished programming, go to Step 9.
7. Press FB07 – Auto Hold ACO line (No Auto Hold releases the ACO line). Press
Hold. Go to the next Step or, if you are finished programming, go to Step 9.
2 = Auto Hold
1 = No auto hold
8. Press FB08 – LCD Language for ACO. Select the display language then, press
Hold.
1 = US English 3 = British English
2 = French
4 = Spanish
9. Press Hold again to save the changes.
10.Lift, then replace hand set to exit programming mode.
FB09 ~ FB20 - Do not change.
Strata CIX IP5000-series Telephone UG 07/09
97
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
IP5122-SDC Programming
IPT Initialization
The IP5122-SDC has a fourth initialization option (FB4). ACO Default.
1. Press 3+6+9+Hold (simultaneously).
2. Press Vol s then press Hold.
3. Press FB04. Revert to factory default ACO settings or Use the saved ACO
settings. (LED On = revert to factory default, LED OFF = use the saved ACO
settings). This will set all the IP5122-SDC program options to factory default
values.
IP5122-SDC Headset Transmit Level Adjustment
The IP5122-SDC headset transmit level for ACO and IPT operation are set by
programming from the station.
1. Press 3+6+9+Hold (simultaneously).
2. Press # then press Hold.
3. Set the headset transmit level using FB1, FB2 and FB3 as shown in the table
below.
Headset Transmit Levels
Transmit Level
FB1
OFF
ON
FB2
OFF
OFF
ON
FB3
OFF
OFF
OFF
OFF
ON
IPT Level ACO Level
Max. (louder)
+12 dB4
+8 dB
+4 dB
0 dB
+8 dB
+8 dB
+4 dB
0 dB
OFF
ON
(Default)
ON
OFF
ON
OFF
OFF
ON
-4 dB
-4 dB
-7 dB
-7 dB
-7 dB
ON
-8 dB
OFF
ON
ON
-12 dB
-16 dB
Min. (softer)
ON
ON
4. Press Hold again.
98
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
Local CO Line Connection
Local CO Line Connection
A local CO line connection and power are required for ACO operation, including
E911.
Connect to IP Network
LAN
PC
Connect to power adapter
if not using POE.
Connect to CO Line
for local CO operation.
HEAD SET
LINE HAND SET
IP5122-SDC Connections
Strata CIX IP5000-series Telephone UG 07/09
99
Download from Www.Somanuals.com. All Manuals Search And Download.
IP5122-SDC
Local CO Line Connection
Local CO Line Circuit Quick Test
This procedure is a quick test to verify the CO Line connection and correct IP5122-
SDC ACO operation. In normal operation the ACO indicator is dark when the ACO
line is not in use, red when the ACO is used by another station, and green when the
ACO is in use at this station. The ACO indictor that is lit a steady red, when the ACO
is not in use, indicates no CO Line connection or a faulty CO Line circuit.
Note The IP5122-SDC does not require a LAN connection for this test.
1. Apply power to the IP5122-SDC (POE or local AC adapter). The ACO button will
LED will be red.
2. Plug in the local CO Line connection. A functional line will cause the ACO
indicator to go dark.
3. Lift the handset then, press the ACO button. Verify that the ACO indicator lights
green and dial tone is heard.
4. Dial a local telephone number. Verify two-way speech.
5. Place the handset in the IP5122-SDC and verify that the ACO indicator goes dark.
100
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
ADM/DSS Console
6
This chapter provides an overview of the optional units that can be connected to the
IP5000-series telephones.
Add-on Modules
The following Add-on modules provide additional buttons:
•
•
10 Button LCD Module (LM5110), up to two supported per telephone .
20 Button Add on Module with paper keystrip (KM5020), up to two supported per
telephone.
•
Digital Direct Station Selection (DSS) Module with 60 buttons and Paper Keystrip,
up to three supported per telephone.
Note The LM and KM modules can be used in conjunction with one telephone.
Strata CIX IP5000-series Telephone UG 07/09
101
Download from Www.Somanuals.com. All Manuals Search And Download.
ADM/DSS Console
ADM
ADM
Buttons and LEDs
The 10 button LCD add on module and the 20 button
keystrip add on modules have programmable feature
buttons that can be assigned as CO Line, Directory
Number, DSS, One Touch Speed Dial or any other
programmable feature (shown right).
When a Programmable Feature Button is programmed
as a DSS button or a Line button, it will have an LED
that provides a status of the outside line or station
assigned to it. The DSS button acts like a speed dial
button to a specific extension.
•
A station or line shows steady red when in use by
others; green when in use by your extension.
• A DSS LED will flash red while making a call and
turn intermittently green once connected.
•
An outside Line LED is green when the outside line
is in use by your extension. It is red if it is in use by
another telephone user.
102
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
ADM/DSS Console
ADM
Adding an ADM
For installation instructions, please refer to the Strata CIX Installation & Maintenance.
Please read the caution, if you are connecting the ADM with the telephone or moving
the telephone with the ADM.
CAUTION! Unplug the line cord from the IP5000-series telephone before
attaching the ADM. Plugging the ADM cable in while the
IP5000-series telephone is powered will damage or impair the
functionality of the telephone, ADM or both.
To change the Brightness Control for a 10 button LCD add on module, refer to
“Brightness Control” on page 15.
Keystrip Labels
To label the keystrip buttons on the 10 button LCD add on module, refer to
“Keystrip Labels” on page 17.
Strata CIX IP5000-series Telephone UG 07/09
103
Download from Www.Somanuals.com. All Manuals Search And Download.
ADM/DSS Console
DSS Console
DSS Console
The 60 button Direct Station Selection
(DSS) Console operates alongside a
digital telephone to provide 60 (up to
180) additional buttons (shown right).
The 60 programmable feature buttons
can be assigned as CO line, extension,
DSS, One Touch Speed Dial or any other
flexible feature.
The IDM5060 (IP DSS module) console
uses dual red and green LEDs to show
call and feature status.
DSS Buttons
DSS buttons can appear on both the ADM and DSS Console. Each DSS button is
associated with a particular station in your telephone system. DSS buttons can transfer
an outside call to the associated station or make a direct call to the associated station.
The DSS LED lights steady red when the station associated with the DSS button is
ringing, busy on a call, or is idle, but all appearances of the station’s extensions are
busy or in-use by other stations. When the associated DSS button is in the Do Not
Disturb mode, the LED blinks red at a slow rate.
DSS buttons cannot directly call station Phantom extension numbers, Distributed
Hunt Group Directory Numbers, or ACD Groups. DSS buttons may be configured as
One Touch Buttons that may be programmed to call these destinations.
Calling a Station
To call a station’s extension from either a DSS console or a ADM, press the DSS
associated with the station.
A station call with a DSS button can be made on-hook or off-hook, and with Voice
First or Tone signaling. After pressing the button, treat the call like any other
station call made from an IP telephone.
104
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
ADM/DSS Console
DSS Console
Transferring to an Idle Station
You can transfer internal or outside calls to an idle station from either a DSS console
or a ADM.
To transfer a call to an idle station
1. Press the DSS button corresponding to the station to be called.
The call is placed automatically on hold. The Line or extension LED flashes green
at double the on-hold rate, and the DSS LED flashes green. You hear a single ring
tone. (If using the Tone signaling mode, you hear successive ring tones.)
2. Announce the call.
With Tone signaling, you would have to wait for the called station to answer before
announcing the call.
3. Hang up.
The call rings the called station when you hang up. While the called station is
ringing, the DSS LED is steady red, and the Line LED flashes green at the on-hold
rate or if on a extension button, it goes idle.
When the called station answers the call, the DSS LED stays steady red, and the
Line LED becomes steady red.
4. If the station does not answer before a period set in system programming, the call
recalls your station.
Strata CIX IP5000-series Telephone UG 07/09
105
Download from Www.Somanuals.com. All Manuals Search And Download.
ADM/DSS Console
DSS Console
Call Transfer with Camp-on
You can transfer a call to a busy station from either a DSS console or an ADM. Use
the DSS to transfer the call, even though the DSS LED associated with the station you
are “transferring to” is red.
To transfer call to a busy station
1. Press DSS corresponding to the busy station to be called.
You may hear a busy tone. The original caller is placed automatically on hold. The
Line or extension LED flashes green at double the on-hold rate, and the DSS LED
remains steady red.
2. Hang up.
The call rings the called station once with the camp-on tone. While the called
station is receiving this tone, the Line LED flashes green (on-hold rate) or if you
are on a extension button, it goes idle. The [DSS] LED remains steady red.
When the called station answers the transferred call, the Line LED becomes steady
red. The [DSS] LED remains steady red.
Note If the busy station is in the Do Not Disturb mode, the call will not transfer, but
will recall your telephone immediately.
If the call is not answered after a specified Recall time set in system programming,
camp-on is cancelled and the transferred call rings back.
Call Answering (Outside Line)
If your ADM or DSS console is equipped with a Line button, you can answer outside
line calls from the ADM or DSS console as you would from a digital telephone.
To answer an incoming outside line call to a ADM or DSS Console, press the
flashing Line.
Speed Dial
Your ADM or DSS console may be equipped with SD (Speed Dial) buttons that can
be programmed to dial telephone numbers or to access features. SD buttons on either
the ADM or DSS console function like SD buttons on digital telephones.
106
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
ADM/DSS Console
DSS Console
Paging
You can make an announcement page to a group of telephone speakers selected in
system programming with All Call Page on the DSS console. SD (if programmed)
on either the DSS console or the ADM can be used for page announcements. See “All
Call Page” on page 77.
Call Forward Override (DSS Override)
Either the DSS buttons on your DSS console or the associated telephone can be set in
system programming to ring stations that are in the Call Forward mode, instead of
being forwarded. Usually the console’s telephone is the unit activated to perform this
function. Among other applications, this feature can be used to notify a person who
forgets to deactivate the Call Forward feature after returning to the office.
To override call forward with the console’s associated telephone
1. Press Cnf/Trn or extension button.
2. Dial the station number set for call forward.
Make the call as you would from any other station. This procedure assumes your
station has a typical program setting.
To override call forward with your DSS Console
Press the station DSS button set for Call Forward.
Night Transfer Button
This button enables a pre-programmed station to place the system into Day, Day2 or
Night Mode. See your System Administrator for information on the settings for Day,
Day2 or Night Mode. These modes will transfer calls to a designated location or voice
mailbox, depending on programming.
1. Press Night Transfer.
2. Press the desired Mode number:
•
•
•
Press 1 for Day Mode (LED remains off).
Press 2 for Day2 Mode (LED flashes red).
Press 3 for Night Mode (LED is solid red).
Strata CIX IP5000-series Telephone UG 07/09
107
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
Headset and Handset Operation 7
The IP5000-series telephones come standard with a built-in headset interface.
Recommended Headsets
For an extensive list of recommended and supported headsets please visit Toshiba's
website at www.telecom.toshiba.com
Important! If you experience any electrical interference when using a wireless
headset, please follow headset manufacturer's recommendations or
ensure the headset base unit is at least six inches from your telephone.
Headset and Handset Interactions
When headset is connected and handset is off hook, you can use handset only.
When headset is connected and handset is on hook, you can use headset.
The handset and headset cannot be used simultaneously.
Strata CIX IP5000-series Telephone UG 07/09
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Headset and Handset Operation
AUTO or CARBON Setting
AUTO or CARBON Setting
There exist two types of headsets: ECM and Carbon. The default setting on the
telephones is AUTO. When the headset is connected to the Headset Modular
Connector of the telephone, the AUTO setting enables the headset I/F current detector
to determine which headset type is connected (EMC or Carbon). If the current is
marginal using a carbon headset (only) and performance is not good, change the
setting to CARBON.
To change the setting from Auto to Carbon
Telephones: All except the Single Line Telephone
1. Press 3+6+9+Hold (simultaneously).
2. Press 0.
3. Press FB6 to toggle Handset On/Off.
Press FB11 to toggle Headset On/Off.
FB LED On: CARBON
FB LED Off: AUTO (default)
4. Press Hold to set the option.
5. Go off-hook, then on-hook to exit the program mode.
To change the headset transmit sensitivity level to Low or Normal
1. Press 3+6+9+Hold (simultaneously).
2. Press 0.
3. Press Hold.
4. Press FB12 to toggle On/Off.
FB LED On: Low
FB LED Off: Normal (default)
5. Press Hold to set the option.
6. Go off-hook, then on-hook to exit program mode.
110
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Headset and Handset Operation
Headset Transmit Level Adjustments
Headset Transmit Level Adjustments
To set the level of the Headset Transmitter for IP5000-series telephones
1. Press 3+6+9+Hold (simultaneously).
2. Press #.
3. Press Hold.
4. Set the headset transmit level using FB1, FB2 and FB3. See table below.
Headset Transmit Level
FB1
Press 1 and Msg
OFF
FB2
Press 2 and Msg
OFF
FB3
Press 3 and Msg
OFF
Level
Transmit
Level
SLT
Max. (louder)
+12 dB
+8 dB
ON
OFF
OFF
OFF
ON
OFF
+4 dB
Default
ON
OFF
ON
ON
OFF
OFF
ON
OFF
ON
ON
ON
ON
0 dB
-4 dB
-8 dB
OFF
ON
-12 dB
-16 dB
Min. (softer)
ON
Note ON means LED ON; OFF means LED OFF
5. Press Hold.
6. Go Off-hook, then on-hook to exit the program mode.
Strata CIX IP5000-series Telephone UG 07/09
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Headset and Handset Operation
Handset Level Adjustments
Handset Level Adjustments
Change the Carbon setting if a Carbon type handset or headset is connected to the
handset jack.
To change the Carbon Setting
1. Press 3+6+9+Hold (simultaneously).
2. Press 0.
3. Press FB6 to toggle On/Off.
FB, LED On: Carbon type handset
FB, LED Off: IP5000 ECM handset (default)
4. Press Hold to set the option.
5. Go off-hook, then on-hook to exit the program mode.
To adjust the Handset Transmit Level for IP5000-series telephones
1. Press 3+6+9+Hold (simultaneously).
2. Press Redial.
3. Press Hold.
FB1: 6~8 [db] (default 0 [db])
4. Press Hold to set the option.
5. Go Off-hook, then on-hook to exit the program mode.
112
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Headset and Handset Operation
Handset Level Adjustments
To adjust the Handset or Headset Receiver Level for IP5000-series telephones
1. Press 3+6+9+Hold (simultaneously).
2. Press Redial.
3. Press Hold.
4. Set the level FB2: -6~8 [dB] (default: 0 dB).
5. Press Hold to set the option.
6. Go Off-hook, then on-hook to exit the program mode.
To adjust the Handset Side Tone Level for IP5000-series telephones
Note This feature is not supported on the Single Line Telephone.
1. Press 3+6+9+Hold (simultaneously).
2. Press Redial.
3. Press Hold.
4. Set the level using the buttons shown in the table below.
Button
FB3
Input
Meaning
Side Tone Off
1
2
Side Tone On
FB4
0~12 [dB]
Side Tone Level (default = 0)
5. Press Hold to set the option.
6. Go Off-hook, then on-hook to exit the program mode.
Strata CIX IP5000-series Telephone UG 07/09
113
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Programming
8
User programming allows you to customize your LCD telephone. You will be able to:
•
•
•
Enter numbers in your personal Speed Dial list
Program One Touch and Programmable Feature Buttons
Register Call Forward assignments
• Assign Message Waiting Keys
•
Assign the background music (BGM) source to be played over the telephone’s
speaker
Strata CIX IP5000-series Telephone UG 07/09
115
Download from Www.Somanuals.com. All Manuals Search And Download.
User Programming
Programming Feature Buttons
Programming Feature Buttons
You can use the User Programming Mode (described below) for customizing your
IP5000-series display telephone without the aid of an Administrator or Service
Technician. The User Programming mode is accessed with a Program button
assigned to a Programmable Feature Button or through an access code. User
Programming enables users to customize these features:
•
Programmable Feature Buttons – The IP5000-series telephones have 10 or 20
Programmable Feature Buttons to which the user can assign any one of
approximately 50 different features. Once a Programmable Feature Button is
programmed, press the button anytime you need to use the feature.
Notes
•
ACD and FeatureFlex Application keys are not supported on programmable
feature buttons 11~20 of the large 9-line display telephone.
• Directory number and external line buttons cannot be added or deleted, but their
ring tones can be individually changed. See “Ring Tones” on page 17.
User Programming Mode
To enter User Programming Mode, press the Program button
...or dial #9876. “USER PROG MODE” appears on your LCD. The Program
LED is steady green.
To exit User Program Mode Lift the handset off-hook / on-hook.
Programmable Feature Button Codes
Programmable Feature Buttons are the unassigned buttons on your keystrip that can
be used to store features. The number of available Programmable Feature Buttons
depends on your telephone model and how the buttons are preassigned by the System
Administrator.
The following steps enable you to program features onto Programmable Feature
Buttons.
116
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
User Programming
Programmable Feature Button Codes
Setting/Changing a Programmable Feature Button’s
Function
1. Press #9876 to enter User Programming Mode.
2. Press Hold.
3. Press the Programmable Feature Button to set or change.
4. Enter the Programmable Feature Button Code (see Table 15), plus any optional
parameters.
5. Press the same Programmable Feature Button (flashing) to save the setting. “DATA
PROGRAMMED” appears on your LCD.
Table 15
Programmable Feature Button Codes
Feature
Code
Feature
Code
660
580
Account Code
Caller ID
150
160
530
290
180
540
610
200
210
840
570
Automatic Busy Redial - On
Automatic Callback
Background Music
Cancel
Do Not Disturb (On/Off)
Door Lock Cancel
DSS Button
Call Forward - Any Calls
All Call
340
350
360
370
Flash - Short
Busy
Flash - Long
No Answer
Microphone Cut-off
One Touch Button
Paging
Busy No Answer
Call Forward - External (Outside) Calls
All Call
380
390
400
420
170
220
230
250
240
590
560
320
330
600
630
640
270
280
860
260
650
Page All Groups
Page Individual Groups
Emerg. Page - Individ. Group
Emerg. Page - All Groups
Answer Page - All Groups
Phantom Extension Message Waiting
Privacy
Busy
No Answer
Busy No Answer
Call Park Orbit
Call Pickup
430
440
450
460
490
500
480
510
520
470
Incoming - Group Pickup
Incoming - Directed Extension Pickup
Incoming - Directed Group Pickup
Incoming - Directed Extension Pickup
On hold - Local Retrieve
On hold - Remote Retrieve
On hold - Outside Line Retrieve
On hold - Directed Extension Retrieve
On hold and Incoming
Incoming - Any External Call
Privacy Release
Night Transfer
Record to VM
Pause/Resume recording
Release Button
Release/Answer
Split
Speed Dial
User Programming Mode
Strata CIX IP5000-series Telephone UG 07/09
117
Download from Www.Somanuals.com. All Manuals Search And Download.
User Programming
One Touch Buttons
One Touch Buttons
One Touch buttons can be used for storing frequently used features or dialed numbers,
such as Speed Dial numbers (use Speed Dial Codes to store additional numbers). One-
touch buttons can be preassigned to your telephone – your System Administrator can
help you identify them.
If you do not have a One Touch button, but you have an available Programmable
Feature Button, you can convert the Programmable Feature Button to a One Touch
button. Perform the procedure called “Setting/Changing a Programmable Feature
Button’s Function” on page 117 (in Step 4, enter the access code for One Touch
button). Once you have created a One Touch button, you can change the function by
using the following procedure.
Changing a One Touch Button
1. Press #9876 to enter User Programming Mode.
2. Press the One Touch button to be set.
3. Enter the digits or special buttons for the function to be dialed. You can include the
following in the dial string:
•
•
•
Dial pad digits 0~9.To program special characters, see Table 16.
A maximum of 32 characters.
Station and System Speed Dial index numbers can be entered. The Speed Dial
index number will automatically dial out on the extension or Line programmed
on the One Touch button with the associated Speed Dial index number.
• Function buttons, except One Touch or a Program button.
• Handset hooking (on-hook/off-hook) cannot be recorded.
4. Press the One Touch button to save the entry.
We suggest labelling the One Touch button on your button strip.
118
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
User Programming
One Touch Buttons
Table 16
Entry
Special Characters
Meaning
Indicates “stop.” The One Touch button blinks rapidly and stops the delivery of the
remaining digits in the string until it is pressed again. Multiple “stops” can be
programmed into one string.
+ Hold
*
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter additional
pause escape sequences. For example, to insert a 17-second pause, enter *9*8. The
display of a pause in the Speed Dial Number shows a “P” without specifying the
duration. In this example, you would see “PP.”
*
(1~9)
**
*
#
#
*
Example of Special Character Usage
To create a One Touch for Park and Page under one button, program the following
sequence under the One Touch button.
CNF #33***HOLD FB1 #30
CNF – puts the caller on hold and gets new dial tone.
#33 – code to park call
– this special character outputs a single * which will select an available orbit
and display the selected orbit on the phone.
**
HOLD – This special character is a Stop. The dial string pauses and enables the
user to view the selected orbit on the display. The dial string will restart from this
point when the One Touch button is pressed again.
*
FB1 – gets new dial tone on the PDN
orbited call.
To Use a One Touch Button
Press the One Touch button.
Setting/Changing a Personal Speed Dial Code
See “Storing a System/Station Speed Dial Number” on page 80.
Strata CIX IP5000-series Telephone UG 07/09
119
Download from Www.Somanuals.com. All Manuals Search And Download.
User Programming
Feature Codes
Feature Codes
Feature Access Codes are entered as a sequence on your telephone to use a particular feature.
For an example of Call Forward, see “Call Forward Examples” on page 53.I
Table 17
Feature Access Codes
1
Feature
Feature Access Code Sequences
Account Code (while on a call)
Attendant Console
Cnf/Trn + #46, dial account code digits
Ext. button + 0
Automatic Busy Redial - On
Automatic Busy Redial - Off
Automatic Callback (while on a call)
Automatic Callback Cancel
Background Music
Cnf/Trn + #441, hang up
Ext. button + #442
4 when you hear busy tone
Ext. button + #431
Telephone Speaker On
Telephone Speaker Off
External Speaker On
External Speaker Off
Ext. button + #490 + music source no. (1~15) + #
Ext. button + #491 + Spkr
Ext. button + #492 + music source no. (1~15) + #
Ext. button + #493 + Spkr
Call Forward - See Table 22 on page 171.
Call Park
Cnf/Trn + #33 + Orbit Number (7000~7019) or an Ext.
No.
Activate (while on a call)
Ext. button + #32 + Orbit Number (7000~7019) or an Ext.
No.
Retrieve (while on a call)
Call Pickup
Directed DN pickup of ringing or held
calls.
Ext. button + #5#6 + Ext. No
Directed DN pickup of ringing, held or
parked calls.
Ext. button + #5#29 + Ext. No. to be picked up
Incoming - Group Pickup
Ext. button + #5#34 + Group Number to be picked up
Ext. button + #5#5 + Primary Ext. No to be picked up
Ext. button + #5#32 + Group Number to be picked up
Ext. button + #5#22 + Ext. Number
Incoming - Directed Extension Pickup
Incoming - Directed Group Pickup
Incoming - Directed Extension Pickup
Ext. button + #5#36 + Page Zone No. (01~08)
#5#5 + Ext. No. of another phone being paged.
All Call Page, Group Page and/or
External Page Pickup of page
Call Pickup for calls on Hold
Local Pickup (call held on this phone)
Ext. button + #5#71
120
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
User Programming
Feature Codes
Table 17
Feature
Feature Access Codes (continued)
1
Feature Access Code Sequences
Remote Pickup (pickup another
extension)
Ext. button + #5#72 + Primary Ext. No.
Pickup an Outside Line on Hold
Pickup a an on Hold
Ext. button + #5#73 + Outside Line on hold (001~128)
#494
Conferencing - Three Way
Dialing Special Characters from a Rotary Phone
Simulate Dialing
Dial 441
*
Simulate Dialing #
Dial 440
Ext. button + #658 + old Security Code (1~15 digits) + # +
new Security Code (1~15 digits) + #
DISA Security Code - Change
Distinctive Ringing - See “Ring Tones” on page 17.
Do Not Disturb
Local - On
Ext. button + #6091
Local - Off
Ext. button + #6092
Ext. button + #6191 + ext. no. of the phone where DND will
be set + Pass Code Number + #
Remote - On
Ext. button + #6192 + ext. no. of the phone where DND will
be set + Pass Code Number + #
Remote - Off
Door Lock Control
Door Phone Calling
Ext. button + #12 + Door Lock Number
Ext. button + #15 + Door Phone No. (01~24, depending on
system size)
Emergency Call
Ext. button + #911
Flash - Short
Ext. button + #450
Flash - Long
Ext. button + #451
LCD Language (Change)
LCR (Outgoing Call)
Message Waiting (MW)
Manually turn off MW LED
Ext. button + #495 + Language No.
Ext. button + 9
Ext. button + #409
Retrieve a received MW
Ext. button + #408
Activate MW at another Station
without Ringing
#63 + Ext. no. (where you want to light the MW LED)
Cancel MW at another Station without
Ringing
#64 + Ext. no. (where you want to turn off the MW LED)
Messaging - Advisory
Strata CIX IP5000-series Telephone UG 07/09
121
Download from Www.Somanuals.com. All Manuals Search And Download.
User Programming
Feature Codes
Table 17
Feature
Feature Access Codes (continued)
Feature Access Code Sequences
1
Ext. or Phantom Ext. button + #411 + Message No. (see table
in “Advisory Messages” on page 46). Hang up.
Advisory Message - Activation
Advisory Message - Cancellation
Network Access Code (Private Network)
Night Ring Answer
Ext. or Phantom Ext. button + #412. Hang up.
8 + Private Network No.
Ext. button + #5#39
Off-hook Call Announce or Busy
Override
Voice First: 2; Tone First: 1, 21, 12, or 5, depending on
programming for your phone.
Override
Busy, Do Not Disturb
After reaching a busy or DND station, press 2.
Executive
Paging
After reaching a busy station, press 3
Page All Groups
Ext. button + #30
Page Individual Groups
Ext. button + #31 + Page Zone No. (01~08)
Ext. button + #38 + Group Number
Ext. button + #37
Emergency Page - Individual Group
Emergency Page - All Groups
Answer for External Group Page
Repeat Last Number Dialed
Ext. button + #5#36 + Page Zone No. (01~08)
Ext. button + 0
*
122
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
User Programming
Feature Codes
Table 17
Feature
Feature Access Codes (continued)
1
Feature Access Code Sequences
Speed Dial (Storing an SD number)
3
#66 + nnn + Phone No. + #
2
Station
nnn = 100~199 SD bin numbers
#66 + nnn + Phone No.3 + #
nnn = 200~999 SD bin numbers
2
System
Speed Dial (Dialing a stored SD number)
4
Spdial + nnn
2
Station
nnn = 100~199 Station SD bin numbers
4
Spdial + nnn
2
System
nnn = 200~999 System SD bin numbers
Start Application
Travelling Class Override
Enter Code
#18
#471, then dial number (enter LCR code if required)
Change Code
#69 + Index Number + old Code + # + new Code + #
Uniform Call Distribution
Login from Agent Station
#6061
#6062
#6161
#6162
#9876
Logout from Agent Station
Login to Agent Station—another Station
Logout to Agent Station–another Station
User Programming Mode
Voice Mail (VM)
number (usually Ext. Number) + #.
Direct Transfer to Voice Mail
Volume Control - Beep
With handset off-hook, press #6101. Press Vol or .
Volume Control - Ringing
With handset on-hook, press #6102. Press Vol or .
1. If you have “hot dialing,” you do not need to press Ext. button as part of the sequence.
2. Stations must be assigned/enabled SD capabilities in system programming by an Administrator
in Program 200-30 (System SD) and Program 200-35 (Station SD).
3. Refer to Table 11 on page 81 to see how to enter and # into a speed dial number.
*
4. If your telephone does not have a Spdial button, press the * button, then dial the three digit Speed
dial number (nnn).
Strata CIX IP5000-series Telephone UG 07/09
123
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming 9
Initializing the IP Telephone
CAUTION! If you initialize the IP telephone, all settings return to default.
1. Press 3+6+9+Hold (simultaneously).
2. Press Vol s.
3. Press Hold
Note Steps 4~6 are optional.
4. Press FB01 to initialize the telephone’s function settings (LED On = initialize,
LED Off = don’t initialize). See “IP Telephone Function Settings” on page 129 for
details.
5. Press FB02 to initialize LCD contrast setting (LED On = initialize, LED OFF =
don’t initialize).
6. Press FB03to initialize the telephone’s IP network connection settings (LED On =
initialize, LED Off = don’t initialize). See “IP Setup Instructions” for details.
Note When initializing an IP5122-SDC telephone, press FB4 to initialize the local
CO line setting.
7. Press Hold again to complete the initialization process.
8. Go off-hook and hang up.
Strata CIX IP5000-series Telephone UG 07/09
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP Setup Instructions
IP Setup Instructions
The following steps must be completed before starting the telephone setup. The IP
password will be assigned by the Telephone Administrator and is the verification step
of the telephone registration with the CIX (xIPU).
To enter the Password
1. Press 3+6+9+Hold (simultaneously).
2. Press 2, then press Hold for the Network Setting Mode.
3. Press Next (for 20 button phone)
...or Next Next (for 10 button phone).
4. Press FB26, then enter the Password.
5. Press Hold Hold.
6. Lift the handset off-hook / on-hook to save the settings.
Telephone Setup
1. Press 3+6+9+Hold (simultaneously).
2. Press 2, then press Hold to select the Network Setting Mode.
3. Press FB1 to see if the DHCP server is in use or not. Press one of the following
(normally, use 1: manual setting):
1: manual setting, then press Hold.
2: auto setting by DHCP server, then press Hold. Go to Step 7 below.
4. Press FB2. Enter the IP address for this IP endpoint and press Hold. To enter the
period in an IP address, press the button on your dialpad (e.g., if the IP address
*
is “192.168.1.241,” press 192*168*1*241).
5. Press FB3. Enter the subnet mask number and press Hold. (e.g., if the subnet
mask address is “255.255.255.0, press 255*255*255*0).
6. If the IP endpoint is connected to a router or other gateway device, press FB4.
Enter the router address, then press Hold. Only used if Step 3, above, is set for
manual setting.
7. Press FB5. Enter a Station ID for the IP endpoint and press Hold. This is usually
your telephone’s primary number (PDN).
126
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP Setup Instructions
8. Press FB6 to enter the CIX Strata Net node number of the CIX node that contains
the xIPU to which this IPT interfaces, then press Hold. This FB setting is for CIX
networked systems only.
9. Press FB11 for xIPU IP address mode. Press one of the following:
1: manual setting, then press Hold. Press FB12 and enter the xIPU IP address,
then press Hold. (e.g., if the xIPU IP address is “192.168.1.241,” enter it in this
format 192*168*1*241).
2: auto setting by broadcast, then press Hold.
10. Press Hold again to set all the above data.
11. Go off-hook and hang up. The IP endpoint will search for the xIPU, initialize and
then set the IP address (from 20 sec. to 60 sec.). Time, Date and PDN displays on
LCD when the information is set.
Notes
• See Table 18 on page 129 for an explanation of the LCDs that you will see during
this procedure.
• If registration fails, check with the Administrator for the correct password (FB26).
To manually set up the VLAN ID
The following steps are for manually setting the VLAN ID in an IPT. If this system is
not using VLAN tags or is using only the default (VID = 1) value, these steps are not
required.
1. Press Hold and then 3+6+9+Hold (simultaneously). The display will show
“Program Select =”
2. Press 2, then press the soft key Scrl until FB21 is indicated.
3. Press FB21 for VLAN Enable/Disable; 1 = Enable VLAN, 2 = Disable VLAN.
4. Press FB22 to enter the VLAN ID (1 – 4094) for this phone.
5. Press FB23 set the PC Port Type, 1 = Access, 2 = Trunk.
6. Press FB24 to enter the PC Port VLAN ID (1 – 4094).
Strata CIX IP5000-series Telephone UG 07/09
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
Initial Start-up
Initial Start-up
When an IP5000-series telephone is connected to power it will initialize then attempt
to connect to the Strata CIX system. The start-up sequence indicators are described
below.
1. All of the Feature Buttons (FB) will light green.
2. Next, all of the FBs will go out.
3. The FBs will light, red, in sequence, one row at a
time from the bottom of the telephone until all of the FBs are lit.
4. The FB will all light green, then go out.
5. The telephone status will be displayed on the LCD.
128
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP Telephone Function Settings
IP Telephone Function Settings
These steps enable you to turn On/Off button beeps, room noise cancellation, handset
Busy Override, and headset volume control. You can also adjust the setting for carbon
headsets vs. non-carbon headsets.
1. Press 3+6+9+Hold (simultaneously).
2. Press 0 then Hold.
3. Press the Feature Buttons to turn the LEDs On/Off (see Table 18).
Table 18
FB
FB1
IP Telephone Function Settings
LED ON
LED OFF
Buttons do not beep.
Buttons beep. (Default)
Speakerphone/Microphone sensitivity
is lower.
Speakerphone/Microphone sensitivity is
normal. (Default)
FB12
Enable handset Busy Override (BOV)
tone.
FB4
FB6
Disable handset BOV. (Default)
Handset carbon supported.
Auto (default)
Turn LED Off if carbon headset is not
attached. (Default - recommended for GN
Netcom Headset GN9330)
Turn LED On if carbon headset is
attached.
FB11
4. Press Hold to set the above data.
5. Lift the handset off-hook / on-hook to save the settings.
Strata CIX IP5000-series Telephone UG 07/09
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
Setting the IP Telephone Headset Transmit Volume
Setting the IP Telephone Headset Transmit
Volume
1. Press 3+6+9+Hold (simultaneously).
2. Press #.
3. Press Hold
4. Press the Feature Buttons to turn the LEDs On/Off for the desired volume
transmission level (see Table 19).
Table 19
Volume Level Transmitted from Headset Microphone
LEDS
FB2
ON
Transmit Level
FB3
ON
ON
ON
ON
OFF
OFF
OFF
OFF
FB1
ON
OFF
ON
OFF
ON
OFF
ON
Level 7 (min.)
Level 6
Level 5
Level 4
Level 3 (initial value)
Level 2
ON
OFF
OFF
ON
ON
OFF
OFF
Level 1
Level 0 (max.)
OFF
5. Press FB4 for headset voice output in speakerphone mode (LED On = with, LED
Off = without).
6. Press Hold to set the above data.
7. Go off-hook and hang up.
Viewing IP Telephone Terminal Information
1. Press 3+6+9+Hold (simultaneously).
2. Press 1, then press Hold.
3. Press FB1 to view IPT firmware version (application and boot versions, read
only).
4. Press FB2 to view IPT MAC address (read only).
5. Lift the handset off-hook / on-hook to save the settings.
Note FB03 will display the Regional Code (default 0); FB04 will display the
connecting IPU address.
130
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
Reset Factory Default Settings
Reset Factory Default Settings
To reset the LCD settings to Factory defaults
1. Press 3+6+9+Hold (simultaneously).
2. Press Volume
3. Press Hold to access Initializing Mode.
FB01 – Resets Terminal Data (This includes Handset Volume and Handset/
Headset sidetone.)
FB02 – Resets LCD Contrast / Backlight data
FB03 – Resets Network data.
FB04 – Resets Analog CO settings (on IP5122-SDC only).
4. Press FBxx to turn on initialization FB will light red.
5. When FB’s have been selected, press Hold to save the settings.
6. Lift the handset off-hook /on-hook to perform initializations. Telephone will reset.
Handset Volume
1. Press 3+6+9+Hold (simultaneously).
2. Press Redial button.
3. Press Hold to access Sound Level Setting Mode.
FB01 – Sets Handset Transmit (Tx) volume
FB02 – Sets Handset Receive (Rx)
4. Press FBxx and enter a value from -8dB to +6dB. Default value is 0. (Tx/Rx)
Note To enter a negative number, use the * key in place of the “-” sign.
5. Press Hold to save settings.
6. Lift the handset off-hook /on-hook to save settings.
Strata CIX IP5000-series Telephone UG 07/09
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
Reset Factory Default Settings
LCD Backlight Setting
1. Press 3+6+9+Hold (simultaneously).
2. Press MIC
3. Press Hold, display shows LCD backlight setting.
4. Press FB01 to change Backlight mode.
5. Enter:
1 = Always Off
2 = Always On
3 = On-Demand
6. Press Hold to save the setting.
7. Press FB02 to change the backlight timer.
8. Enter value from 1~30 for a 10~300 second time (default 3 for 30 seconds).
9. Press Hold to save the setting.
10.Press Hold to return to the IP Programming Mode display.
11.Lift the handset off-hook /on-hook to save settings.
LCD Backlight Brightness Control
The LCD Backlight can be used at four different levels.
1. Press 3+6+9+Hold (simultaneously).
2. Press Dim or Bright softkey to reach the prefered brightness.
3. Lift the handset off-hook /on-hook to save settings.
132
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
Reset Factory Default Settings
Handset / Headset Side Tone Volume Setting
1. Press 3+6+9+Hold (simultaneously).
2. Press Redial button.
3. Press Hold to access Sound Level Setting Mode.
FB03 controls Side Tone mode setting. Enter:
1 = Side Tone Off
2 = Side Tone On
FB04 controls Side Tone Volume.
Enter a value from 0dB to 12dB. Default is 0.
4. Press FBxx and enter the appropriate value.
5. Press Hold to save the settings.
6. Press Hold to return to IP Programming Mode display.
7. Lift the handset off-hook /on-hook to save settings.
LCD Contrast Setting
Available on backlit telephones.
To adjust the LCD contrast on the backlit telephones
1. Press and hold down the Mic button.
2. Press and release Vol or Vol repeatedly.
Note Holding down the Vol key does not continue to change the setting. The key
must be pressed for each step of contrast change.
To adjust the LCD contrast on the Add-on Module
1. Press Hold+3+6+9 (simultaneously).
2. Press Contrast + or Contrast - softkey / button to increase or decrease contrast.
3. Lift the handset off-hook / on-hook to save settings.
Strata CIX IP5000-series Telephone UG 07/09
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
IP5131-SDL Settings
This section contains instructions to configure the IP5131-SDL telephone. All
instructions found in this section pertain to the items found in the IP Configurations
screen of the IP5131-SDL telephone.
Configurations
Press Hold+3+6+9 (simultaneously) to display the IP
IP Configurations
Configurations main screen.
Term Info
Network
Advance
Sound
Key Repeat
Net Diag
Factory
To access any of the screens that relate to an item on
the Configurations screen
Initialize
Press the soft key that corresponds to the item. The
Others
details pertaining to that item display.
Note The following table explains each of the items
Reset
displayed on the Configurations screen.
Config
ITEM
INFORMATION DISPLAY
Term Info
Displays the Software Version, the MAC address, the Regional Code
and xIPU address. You can press the EXIT soft key to go back to the IP
Configurations screen.
Note This screen is for display only and you cannot make any
changes to the settings.
Network
Advance
Page 1:Displays or sets the DHCP, IP Address, Subnet, the default
gateway, station information and LIPU Address.
Page 2:Displays or sets node, IPU Mode, Primary IPU, Secondary IPU
and Port Settings.
Page 3:Displays or sets Auto Login Mode and Auto Login password.
Page 1:Displays or sets the Primary Name Server, the Secondary Name
Server, GRQ Port, RRQ Port, and AP Address
Page 2:Displays or sets the Admin address upper and lower bound, the
User ID and password, as well as the Dynamic Port Base.
Page 3:Displays or sets the VLAN Setting, PC Port type and PC Port
VLAN ID.
134
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
ITEM
INFORMATION DISPLAY
Sound
Page 1:Displays settings for Keybeep, Roam Noise, Handset BOV, and
Carbon Handset and Carbon Headset.
Page 2:Displays or sets the Headset and Handset Control Modes as
well as the Transmit and Receiver levels.
Page 3:Displays or sets the Sidetone Mode and Volume.
Others
Displays or sets the Language, Input times and Backlight settings.
Key Repeat
Displays or sets the Key Repeat settings including the Delay Timer and
Repeat Rate.
Net Diag
Displays an option for a Loop Back Test.
Factory Settings
Initialize
Displays ADM/Debug Mode, Display / Key Test and Display Mode.
Displays or resets the following settings: all Data, Network, Sound,
Browser, LCD, Key Repeat, Others, Factory.
Reset
Displays an option to Reset the IP phone.
Saving Changes
When Changes are made throughout the IP Configurations menus, the
Set softkey saves the setting. Press Set until the IP Configurations
screen is displayed then press Reset softkey to reboot the phone to
apply the settings.
Strata CIX IP5000-series Telephone UG 07/09
135
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Table 20
IP5131-SDL Default Settings
Major items
Minor items
Initial value
0.0.0.0
ON
Network Diagnosis
1
1
Ping address
DHCP server mode <ON/OFF>
2
3
4
5
6
IP address
127.0.0.1
255.255.255.0
0.0.0.0
Subnet mask
Default router address
Station ID
Network Setting
(Basic)
blank
Node number
blank
Libra Server/IPU address setting
<Manual / broadcast>
7
8
broadcast
Libra Server/IPU IP address setting
during manual setting
0.0.0.0
0.0.0.0
IP address setting for DNS Server
(Primary Name Server)
1
IP address setting for DNS Server
(Secondary Name Server)
2
3
4
0.0.0.0
1718
GRQ port number
<1024-65535>
RRQ port number
<1024-65535>
1719
Network Setting
(Advanced)
0.0.0.0
5
6
IP address setting for application server
External administration terminal IP
address upper bound
0.0.0.0
0.0.0.0
External administration terminal IP
address lower bound
7
8
External administration user ID
External administration password
9999
9999
9
136
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Table 20
IP5131-SDL Default Settings
Major items
Minor items
Initial value
ON
1
2
3
4
5
6
Key beep <ON/OFF>
Room noise <ON/OFF>
OFF
Handset BOV <ON/OFF>
Carbon handset <ON/OFF>
Carbon headset <ON/OFF>
Headset Tx control <Normal / Low>
OFF
OFF
OFF
Normal
Sound Setting
Headset Tx volume
<0:Min – 7:Max>
7
8
4
Handset Rx output <ON/OFF>
OFF
ON
9
Comfort noise <ON/OFF>
Key repeat <OFF/ON>
1
ON
1
Repeat delay timer
<1:Short – 5:Long>
2
3
Key Repeat Setting
Repeat rate timer
<1:Fast – 5:Slow>
1
Language mode
1
<English (US/CA) / English (UK) /
French / Spanish>
English(US/CA)
Other Setting
2
3
Input timer mode <ON/OFF>
OFF
2
Input timer value
<1:Fast – 3:Slow>
ADM/DEBUG mode
<DEBUG / ADM>
Display/Key Test
1
ADM
Factory Setting
2
3
Display mode
(IP5131)
IP5131
Strata CIX IP5000-series Telephone UG 07/09
137
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Network Settings
To access the Network Setting screens
1. Press Hold+3+6+9 (simultaneously), choose the Network soft key.
2. From the IP Configurations screen, there are three screens for Network Settings
(shown below). Use the “” and “” soft keys to move from one screen to
another.
Network Setting
DHCP : On
Network Setting
Node : 1
Network Setting
Auto Login Mode : Auto
IP Addr : 192.168.0.10
Subnet : 0. 0. 0. 0
Dflt-GW : 0. 0. 0. 0
Station: 2000
IPU Mode : Broadcast
P-IPU : 192. 168. 0. 77
S-IPU : 0. 0. 0. 0
Auto Login Password:
Port Setting: Dynamic
[Set]
(1/3)
[Cancel]
[Set]
(2/3)
[Cancel]
[Set]
(3/3)
[Cancel]
Config
Config
Config
The general operation on the Network Settings screens is as follows:
•
To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.
• Press the Set soft key to rewrite the NV-RAM data if any setting of a minor item is
changed. The screen will move to the Resetting Selection Screen. (The Resetting
Selection Screen will be described in detail later.)
• Press the Cancel soft key to cancel all the intended setting changes in the minor
items and to go to the IP Configurations Screen without rewriting the NV-RAM
data.
138
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
DHCP Server Settings
1. Press Hold+3+6+9 (simultaneously).
2. From the IP Configurations screen, choose Network >
DHCP. The DHCP Mode screen displays.
DHCP Mode
On
Off
The current default set is underlined.
3. Press the On or Off soft keys to change the set value.
4. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
[Set]
[Cancel]
Notes
Config
• The Network Setting Screen displays when you press
Set or Cancel.
•
DHCP is underlined in the display if you changed the setting.
• If the DHCP setting is changed from On to Off, then the “IP Addr” setting on the
Network Setting screen will be initialized to the initial value.
•
The IP5131-SDL gets its IP address, Subnet mask, Default Gateway, DNS server
address from DHCP server.
Strata CIX IP5000-series Telephone UG 07/09
139
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
IP Address
1. Press Hold+3+6+9 (simultaneously).
2. From the IP Configurations screen, choose Network >
IP Addr. The IP Address screen displays (shown right).
The current IP Address displays.
IP Address
192.168.0.10
:Current
:New
To change settings on the screen
Backspace = Vol-Down
The following applies to the IP Address, Subnet Mask,
Default Gateway, and Primary DNS Server.
1. Use the dial pad (1~0, *) to enter a new IP address.
[Set]
[Cancel]
Config
Use on the dial pad to enter a period (.) in an IP
address.
*
2. Press the Set soft key to select the setting change and go
back to the Network Setting Screen.
Errors
Illegal Data
On the Network Setting Screen, the item you changed
will be underlined in the display (in this case the IP
Address).
3. Pressing the Set soft key can give you an Error Screen if
you incorrectly entered the address.
[Ok]
4. Press the Ok soft key on the Error Screen to correct the
entry. Five seconds after the Error Screen displays, the
Config
screen automatically goes back to the appropriate setting screen (in this case the IP
Address) and the address that resulted in an error will be displayed.
5. Press the Cancel soft key to cancel the setting change and to go to the Network
Setting screen.
140
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Subnet Mask
1. From the IP Configurations screen, choose Network >
Subnet Mask
255.255.255.0
Subnet. The Subnet Mask screen displays (shown
right). The current subnet displays on the one-line text
field.
:Current
:New
2. Follow the steps “To change settings on the screen” on
page 140.
Backspace = Vol-Down
[Set]
[Cancel]
Config
Default Gateway Address
1. From the IP Configurations screen, choose Network >
Dflt-GW. The Default GW Address screen displays
(shown right). The current default Gateway Address
displays on the one-line text field.
Default GW Address
0. 0. 0. 0
:Current
:New
2. Follow the steps “To change settings on the screen” on
page 140.
Backspace = Vol-Down
[Set]
[Cancel]
Config
Strata CIX IP5000-series Telephone UG 07/09
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Station ID
From the IP Configurations screen, choose Network >
Station ID
2000
Station. The Station ID screen displays (shown right).
The current Station ID displays.
:Current
:New
To Change or Add Information on this screen
Backspace = Vol-Down
1. Enter the New Station ID to change or add a Station
ID.
2. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Network Setting screen.
[Set]
[Cancel]
Config
Notes
• Use the dial pad (1~0) to change or enter a new Station ID. Press Vol t to
backspace.
•
You can enter a maximum of seven digits.
• Pressing the Set soft key can give you an Error Screen if you incorrectly entered
the Station ID.
•
Press the OK soft key on the Error Screen to correct the entry. Five seconds after
the Error Screen displays, the screen automatically goes back to the appropriate
setting screen (in this case the IP Address) and the address that resulted in an error
will be displayed.
Node Number
1. From the IP Configurations screen, choose Network >
Screen 2 > Node. The current Node displays
(shown right).
Node
1
:Current
:New
2. Enter the Node. You must be first program this node in
eManager, Program 150, FB09.
Backspace = Vol-Down
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Network Setting screen.
[Set]
[Cancel]
Note Refer to Station ID Notes above.
Config
142
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
CIX System /IPU Address Mode
1. From the IP Configurations screen, choose Network >
> IPU Mode.
IPU Mode
Manual
2. Press the Manual or Broadcast soft key to change the
set value. The value set is underlined in the display.
Broadcast
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Network Setting screen [2/3].
[Set]
[Cancel]
Config
CIX System/IPU Address Screen
S-IPU is the Secondary IPU (the second address the phone will try to register to if the
primary IPU cannot be reached.
1. From the IP Configurations screen, choose Network >
Primary IPU IP
192.168. 0. 77
> x-IPU. The Primary or Secondary IPU address
displays (shown right).
:Current
:New
2. Follow the steps “To change settings on the screen”
on page 140.
Backspace = Vol-Down
[Set]
[Cancel]
Config
Strata CIX IP5000-series Telephone UG 07/09
143
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Port Setting
1. From the IP Configurations screen, choose Network >
Port Setting
Dynamic
> Port Setting. The Port Setting screen displays.
2. Press the Dynamic or Static softkey to change the set
value. The set value is underlined in the display.
Static
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Network Setting screen [2/3].
[Set]
[Cancel]
Config
Auto Login Mode (For IP Mobility)
1. From the IP Configurations screen, choose Network >
Auto Login Mode
Auto
>
> Auto Login Mode. The Auto Login screen
displays.
Manual
2. Press the Auto or Manual softkey to set the value. The
value set is underlined in the display.
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Network Setting screen [2/3].
[Set]
[Cancel]
Config
Auto Login Password
1. From the IP Configurations screen, choose Network >
Auto Login Password
:Current
:New
>
> Auto Login Password. The Auto Login
Password screen displays.
2. Press the center button of the Navigation button to
highlight the field.
Backspace = Vol-Down
Using the keypad, enter the password.
3. Press the Set softkey to cancel the change and go to
the Network Setting screen [2/3].
[Set]
[Cancel]
Config
144
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Advanced Network Settings
To access the Advanced Network Setting screens
1. Press Hold+3+6+9 (simultaneously).
2. Press Advanced softkey, the Advanced Setting screen appears.
Note There are three screens for Advanced Settings (shown below). Use the
and
soft keys to move from one screen to another.
Advanced Setting
P-DNS : 0. 0. 0. 0
Advanced Setting
Admin_U : 0. 0. 0. 0
Advanced Setting
VLAN : Disable
S-DNS : 0. 0. 0. 0
GRQ Port : 0
Admin_L : 0. 0. 0. 0
User ID : 9999
Password : ****
Dynamic Port
Phone VLAN ID : 1
PC Port Type: Access
PC Port VLAN ID : 1
VLAN : Disable
RRQ Port : 0
AP Addr : 0. 0. 0. 0
[Set]
(1/3)
[Cancel]
[Set]
(2/3)
[Cancel]
[Set]
(3/3)
[Cancel]
Config
Config
Config
The general operation on the Network Settings screens is as follows:
•
To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.
• Press the Set soft key to rewrite the NV-RAM data if any setting of a minor item is
changed. The screen will move to the Resetting Selection Screen. (The Resetting
Selection Screen will be described in detail later.)
•
Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the IP Configurations screen without rewriting the NV-RAM
data.
Strata CIX IP5000-series Telephone UG 07/09
145
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
IP Address for Primary DNS (Domain Name Server)
Note If DHCP Mode is ON, you don’t have to set any parameters for the DNS server.
1. From IP Configurations > Advanced > P-DNS. The
Primary DNS Address
Primary DNS Address screen displays (shown right).
192.168. 0. 234
:Current
2. Follow the steps “To change settings on the screen” on
page 140.
:New
Backspace = Vol-Down
[Set]
[Cancel]
Config
IP Address for Secondary DNS
1. From IP Configurations > Advanced > S-DNS. The
Secondary DNS Address screen displays (shown
right).
Secondary DNS Address
192.168. 0. 235 :Current
:New
2. Follow the steps “To change settings on the screen” on
page 140.
Backspace = Vol-Down
[Set]
[Cancel]
Config
146
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
GRQ Port Number
1. From IP Configurations > Advanced > GRQ Port.
The current GRQ Port Number displays (shown
right).
0
:Current
:New
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change
and go to the Advanced Setting screen.
Backspace = Vol-Down
[Set]
[Cancel]
Note For other notes, refer to “Station ID” on page 142.
Config
RRQ Port Number
current RRQ Port Number displays (shown right).
RRQ Port Number
0
:Current
:New
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change
and go to the Network Setting screen.
Backspace = Vol-Down
Note For other notes, refer to “Station ID” on page 142.
[Set]
[Cancel]
Config
Application Server Address
1. From IP Configurations > Advanced > AP Addr. The
current Application Server Addr screen displays
Application Server Addr
192.168. 0. 235 :Current
:New
Note The Application Server Address can be an IP
Address or a URL (alphanumeric). See “Dial Pad
Alphanumeric Characters” on page 148 to enter the
URL.
Backspace = Vol-Down
[Set]
[Cancel]
2. Follow the steps “To change settings on the screen” on
page 140. Also see Table 21 on Page 148 for
additional information.
Config
Strata CIX IP5000-series Telephone UG 07/09
147
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Table 21
Dial Pad Alphanumeric Characters
Dial
Number of times to press the dial pad button
Pad
Buttons
1
2
3
4
5
6
7
8
9
1
space
2
3
4
5
6
7
8
9
a
d
g
j
b
e
h
k
n
q
u
x
/
c
f
A
D
G
J
B
E
H
K
N
P
C
F
goto a
goto d
goto g
goto j
goto m
R
i
I
l
L
O
Q
V
X
_
m
p
t
o
r
M
s
S
Z
goto p
v
y
:
T
z
U
W
-
goto t
Y
w
.
goto w
0 (1st)
0 (2nd)
0 (3rd)
0 (4th)
@
%
;
~
!
)
[
“
*
]
#
+
‘
$
,
^
&
=
‘
(
<
>
?
{
l
}
goto .
Press Vol t button to back space
Press 0 for all punctuation marks
Press # to toggle between Alpha and Numeric modes
Press to enter a period.
*
148
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
External Administration Terminal IP Address Upper Bound Setting
This screen can be used to set an External Administration Terminal IP Address Upper
Bound. External accessing is not enabled if the Upper and Lower bound IP addresses
Administration Terminal IP address is within the Upper and Lower bound IP address
range.
1. From IP Configurations > Advanced >
>
Admin Addr Upper Bound
0. 0. 0. 0 :Current
:New
Admin_U. The External Administration Terminal IP
Address Upper Bound Setting screen displays (shown
right).
2. Follow the steps “To change settings on the screen” on
page 140.
Backspace = Vol-Down
[Set]
[Cancel]
Config
Strata CIX IP5000-series Telephone UG 07/09
149
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
External Administration Terminal IP Address Lower Bound Setting
This screen can be used to set an External Administration Terminal IP Address Lower
Bound. External accessing is not enabled if the Upper and Lower bound IP addresses
Administration Terminal IP address is within the Upper and Lower bound IP address
range.
1. From IP Configurations > Advanced >
>
Admin Addr Lower Bound
0. 0. 0. 0 :Current
:New
Admin_L. The External Administration Terminal IP
Address Lower Bound Setting screen displays (shown
right).
2. Follow the steps “To change settings on the screen” on
page 140.
Backspace = Vol-Down
[Set]
[Cancel]
Config
150
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
External Administration User ID Setting
Use this screen to set an User ID. External accessing is enabled when the user can
successfully log in with correct User ID and Password
1. From IP Configurations > Advanced >
> User ID.
User ID
The External Administration User ID Setting screen
displays (shown right).
:Current
:New
2. Enter the New User ID to change or add a User ID
(maximum 16 characters).
Backspace = Vol-Down
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
[Set]
[Cancel]
Note For other notes, refer to “Station ID” on page 142.
Config
1. From IP Configurations > Advanced >
>
Password
Password. The Password screen displays (shown
right).
:Current
:New
:New Again
To change or add a new password
Backspace = Vol-Down
Note The Password can be alphanumeric, see “Dial Pad
Alphanumeric Characters” on page 148 to enter the
Password.
[Set]
[Cancel]
2. Press the Current soft key (left), then enter the Current
Password.
Config
characters).
4. Press the New Again soft key, then re-enter the new password.
5. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and go to the Advanced Setting
screen.
Note For other notes, refer to “Station ID” on page 142.
Strata CIX IP5000-series Telephone UG 07/09
151
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Dynamic Port Base
1. From IP Configurations > Advanced >
> Dynamic
Dynamic Port Base
48751
Port Base. The Dynamic Port Base screen displays
(shown right).
:Current
:New
2. Enter the new port number (maximum 5 characters).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
Backspace = Vol-Down
[Set]
[Cancel]
Config
VLAN - Virtual LAN
1. From IP Configurations > Advanced >
>
>
VLAN
Enable
VLAN. The VLAN screen displays (shown right).
2. Press the Enable or Disable softkey to change the set
value. The value set is underlined in the display.
Disable
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
[Set]
[Cancel]
Config
Phone VLAN ID
1. From IP Configurations > Advanced >
>
>
Phone VLAN ID
1
VLANID. The Phone VLAN ID screen appears
(shown right).
:Current
:New
2. Enter the new number (maximum 5 digits).
3. Press the Set soft key to accept the change
Backspace = Vol-Down
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
[Set]
[Cancel]
Config
152
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
PC Port Type
1. From IP Configurations > Advanced >
>
>
PC Port Type
Access
PC Port Type. The PC Port Type screen displays
(shown right).
Trunk
2. Press the Access or Trunk softkey to set the value. The
set value will be underlined.
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
[Set]
[Cancel]
Config
PC Port VLAN ID
1. From IP Configurations > Advanced >
>
> PC
PC Port VLAN ID
1
Port VLAN ID. The PC Port VLAN ID screen
displays (shown right).
:Current
:New
2. Enter the new ID (maximum 4 characters).
3. Press the Set soft key to accept the change
Backspace = Vol-Down
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
[Set]
[Cancel]
Config
Strata CIX IP5000-series Telephone UG 07/09
153
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Sound Settings
To access the Sound Setting screens
From the IP Configurations menu, choose the Sound soft key.
Note There are three screens for Sound Settings (shown below). Use the
and
soft keys to move from one screen to another.
Sound Setting
Keybeep
Sound Setting
: Normal
Sound Setting
: On
:Off
:Off
:Off
:Off
Headset Tx Ctl
Side Tone Mode
: On
: 3
: 0
Room Noise
Headset Tx Vol
Headset Rx Mode
Headset Tx Vol
Side Tone Vol
: Off
: 0
Handset BOV
Carbon Handset
Carbon Headset
Headset Rx Vlo : 0
[Set]
(1/3)
[Cancel]
[Set]
(2/3)
[Cancel]
[Set]
(3/3)
[Cancel]
Config
Config
Config
The general operation on the Sound Settings screens is as follows:
•
To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.
• Press the Set soft key to rewrite the NV-RAM data if any setting of a minor item is
changed.
•
Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the IP Configurations Screen without rewriting the NV-RAM
data.
154
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Keybeep, Room Noise, Handset BOV, Carbon Handset, and Carbon Headset
Important! The following steps apply to all of the above items.
1. From the IP Configurations screen, select Sound >
Keybeep
On
Keybeep (or any of the above items). The appropriate
screen displays.
Off
2. Press the On or Off soft keys to change the set value.
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
The changed setting is underlined in the Sound screen
display.
[Set]
[Cancel]
Config
Headset Tx Control Setting Screen
1. From the IP Configurations screen, select Sound >
> Headset Tx Ctl. The Headset Tx Control screen
displays.
Headset Tx Control
Low
Normal
2. Press the Low or Normal soft keys to change the set
value.
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
[Set]
[Cancel]
The changed setting is underlined in the Sound screen
display.
Config
Strata CIX IP5000-series Telephone UG 07/09
155
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Headset Tx Volume Setting Screen
From the IP Configurations screen, select Sound >
> Headset Tx Vol. The Headset Tx Volume screen
displays.
Headset Tx Volume
3
:Current
:New (0:Min. - 7: Max)
To Change Information on this screen
Backspace = Vol-Down
1. Enter the New volume level.
2. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Sound Setting screen 2.
[Set]
[Cancel]
Config
Notes
•
•
•
Use the dial pad (1~0) to change or enter volume level. Press Vol t to backspace.
You can enter a maximum of one digit.
Pressing the Set soft key can give you an Error Screen if you did not enter any data
or entered a non-numeric entry.
• Press the Ok soft key on the Error Screen to correct the entry. Five seconds after
the Error Screen displays, the screen automatically goes back to the Headset Tx
Volume screen and the number that resulted in an error will be displayed.
Handset Rx Output Setting
1. From the IP Configurations screen, select Sound >
Handset Rx Mode
On
> Handset Rx Mode. The Handset Rx Mode screen
displays.
Off
2. Press the On or Off soft keys to change the set value.
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
The changed setting is underlined in the Sound screen
display.
[Set]
[Cancel]
Config
156
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Headset Tx and Rx Volume
1. From the IP Configurations screen, select Sound >
> Handset Tx/Rx Volume. The appropriate screen will
display.
Handset Tx Volume
1
:Current
:New (-8: Min.- 6:Max)
2. Enter the new volume level.
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change and
go to the Sound Setting Screen 2.
Backspace = Vol-Down
- (Minus) = * Key
[Set]
[Cancel]
Refer to Notes section of Tx Volume for additional
details.
Config
Side Tone Mode
1. From the IP Configurations menu, select Sound >
Side Tone Mode
On
>
> Side Tone Mode. The Side Tone Mode screen
displays.
Off
2. Press the On or Off soft keys to change the set value.
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
[Set]
[Cancel]
Config
Side Tone Volume
1. From the IP Configurations menu, select Sound >
>
Side Tone Volume
> Side Tone Volume. The Side Tone Volume screen
display.
0
:Current
:New (0: Min.- 12:Max)
2. Enter the new volume level.
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change and
go to the Sound Setting Screen 2.
Backspace = Vol-Down
- (Minus) = * Key
[Set]
[Cancel]
Refer to Notes section of Tx Volume for additional
details.
Config
Strata CIX IP5000-series Telephone UG 07/09
157
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Key Repeat
From the IP Configurations menu, select Key Repeat.
Key Repeat Setting
Off / On Setting
The Key Repeat Settings screen displays.
:On
Repeat Delay Timer :1
:1
The general operation on the Key Repeat screens is as
follows:
Repeat Delay Timer
•
To view details of an item displayed on the screens
above, press the soft key that corresponds to that item.
[Set]
[Cancel]
•
Press the Set soft key to rewrite the NV-RAM data if
any setting of an item on this screen is changed.
Config
• Press the Cancel soft key to cancel all the intended setting changes in the minor
items and to go to the Configurations Screen without rewriting the NV-RAM data.
Key Repeat OFF/ON
1. From the IP Configurations menu, select Key Repeat >
Off/On Mode
On
Off/On Setting. The Off/on Setting screen displays.
2. Press the On or Off soft keys to change the set value.
Off
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
The changed setting is underlined in the Key Repeat
Setting screen display.
[Set]
[Cancel]
Config
158
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Repeat Delay Timer and Repeat Rate Timer
Important! The following steps apply to the above two items.
From the IP Configurations menu, select Key Repeat
Handset Tx Volume
> Repeat Delay Timer or Repeat Rate Timer. The
appropriate screen displays (shown right).
1
:Current
:New (1: Short.- 5:Long)
To Change Information on this screen
Backspace = Vol-Down
1. Enter the New Repeat Delay Timer to change the
setting.
Note Use the dial pad 1~5 and Vol t to backspace.
For Repeat Delay Timer: 1 (short) to 5 (long).
For Repeat Rate Timer: 1 (fast) to 5 (slow)
[Set]
[Cancel]
Config
2. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and go to the Key Repeat
Setting screen.
Notes
•
Pressing the Set soft key can give you an Error screen if you incorrectly entered the
timer value (outside of acceptable range).
• Press the Ok soft key on the Error Screen to correct the entry. Five seconds after
the Error Screen displays, the screen automatically goes back to the Repeat Delay
Timer or Repeat Rate Time screen and the number that resulted in an error will
display.
Strata CIX IP5000-series Telephone UG 07/09
159
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Other Setting
From the IP Configurations menu, select Others. The
Other Setting
Language:
Others screen displays. This screen contains Language,
Input timer Mode, Input Timer Value settings,
Backlight settings.
US English
Input Timer Mode: Off
:2
Input Timer Value
BL Mode: On Demand
BL Timer: 250 sec
Notes
BL Bright:
0
The general operation on the Other Settings screens is as
follows:
[Set]
[Cancel]
•
To view details of an item displayed on the screens
above, press the soft key that corresponds to that item.
Config
• Press the Set soft key to rewrite the NV-RAM data if any setting of an item on this
screen is changed. The screen goes back to the IP Configurations screen after
rewriting the NV-RAM data.
•
Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the IP Configurations screen without rewriting the NV-RAM
data.
Language Mode Setting
1. From the IP Configurations menu, select Others >
Language. The Language Mode screen displays.
Language Mode
US English
UK English
French
2. Press the US English, UK English, French or Spanish
soft keys to change the set value.
Spanish
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
The changed setting is underlined in the Other Settings
screen.
[Set]
[Cancel]
Config
160
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Input Timer Mode Setting Screen
1. From the IP Configurations menu, select Others > Input
Timer Mode. The Input Timer Mode Setting screen
displays.
Input Timer Mode
On
Off
2. Press the On or Off soft keys to change the set value.
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
The changed setting is underlined in the Other Settings
screen display.
[Set]
[Cancel]
Config
Input Timer Value Setting Screen
From the IP Configurations menu, select Others >
Input Timer Value. The Input Timer Value screen
displays (shown right).
Input Timer Value
:Current
:New (1: Fast - 3:Slow)
1
To Change Information on this screen
Backspace = Vol-Down
1. Enter the New Input Timer to change the setting.
Note Use the dial pad 1~3 and Vol t to backspace.
Input Timer Value: 1 (fast) to 3 (slow)
[Set]
[Cancel]
Config
2. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Other Setting screen.
Notes
• Pressing the Set soft key can give you an Error Screen if you incorrectly entered
the timer value (outside of acceptable range).
• Press the Ok soft key on the Error Screen to correct the entry. Five seconds after
the Error Screen displays, the screen automatically goes back to the Input Timer
screen and the number that resulted in an error will display.
Strata CIX IP5000-series Telephone UG 07/09
161
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Backlight Mode Screen
1. From the IP Configurations menu, select Others > BL
Backlight Mode
Always Off
Mode. The Backlight Mode screen displays.
2. Choose Always Off, Always On or On-Demand
softkey to setup when you would like to use the
backlight.
Always On
On-demand
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change and
go to the Other Settings screen.
[Set]
[Cancel]
Config
Backlight Timer
1. From the IP Configurations menu, select Others > BL
Timer. The Backlight Timer Value x10sec screen
displays (shown right).
Backlight Timer x10sec
25 :Current
: New [1: Min - 30: Max]
2. Enter the New Timer value to change the setting.
Backspace = Vol-Down
Note Use the dial pad to enter a value of (1~30), where
1=10 seconds and 30=300 seconds.
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Other Setting screen.
[Set]
[Cancel]
Config
Backlight Brightness
1. From the IP Configurations menu, select Others > BL
Bright. The Backlight Bright screen displays (shown
right).
Backlight Bright
:Current
: New [0: Dim - 3: Bright]
0
2. Enter the New Brightness value to change the setting.
Backspace = Vol-Down
Note Use the dial pad to enter a value of (1~3).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Other Setting screen.
[Set]
[Cancel]
Config
162
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Loop Back Test
1. Press Hold+3+6+9 (simultaneously).
2. From the IP Configurations screen, select Net Diag >
Loop Back Test.
Loop Back Test
Ping to 192.168.0.77
Last Result: 10/10
Notes
• Press Exit to move back a screen.
Ping Address Setting
Ping Start
•
An IP address of current Ping send-to party is displayed
in the second line.
[Exit]
•
The result of Ping executed last is displayed in the third
line. (Ping result is confirmed only on this screen.)
Config
Setting Ping Send-to Address
1. Press the Ping Address Setting soft key. The Ping
Address Setting Screen displays (shown right.
Ping Address Setting
192.168.0.77
:Current
2. Using the dial pad, press 1 ~ 0 and * to enter an IP
address or change an IP address. Input the delimiter “.”
:New
by pressing key.
*
Backspace = Vol-Down
Press Vol t to backspace.
3. Press SET soft key to go back to the Loop Back Test
Screen (after rewriting the NV-RAM data if an IP
address is changed). (“Ping to xxx.xxx.xxx.xxx” will
display the IP address after the setting change.)
[Set]
[Cancel]
Config
Note Pressing the Set soft key can cause the screen to
move to the Input Error Screen if an error occurred
when entering the IP address (shown right).
Errors
Illegal Data
4. Press the OK soft key on the Error Screen to go to the
Address Setting Screen.
Note In five seconds after displaying the Input Error
Screen, the screen automatically moves to the
Address Setting Screen. (The address that has
resulted in an input error will be displayed as it is
when moving to the Address Setting Screen.)
[Ok]
Config
Strata CIX IP5000-series Telephone UG 07/09
163
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
5. Select the Cancel soft key to cancel the intended setting change and to move to the
Loop Back Test Screen without rewriting the NV-RAM data.
Ping Start and Stop
From the Loop Back Test screen, press the Ping Start
soft key. The Pinging Screen displays (shown right) and
Pinging starts.
Pinging
Ping to 192.168.0.77
Executing 5/5
Ping Stop
Notes
•
Pinging is attempted ten times on the Pinging Screen
and is stopped automatically. The screen will move to
the Loop Back Test Screen. The result is displayed in
the third line of the Loop Back Test Screen as “Last
result n/10 (successful operations/attempts made).”
[Exit]
Config
•
During Ping execution, the progress is displayed by showing “Executing n/10
(number of successful operations/number of trial operations)” in the third line on
the Pinging Screen.
• Pressing the “Ping Stop” or “Exit” key on the Pinging Screen will stop Pinging and
cause the screen to move to the Loop Back Test Screen. Then the result will be
displayed.
164
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Factory
From the IP Configurations menu select Factory. The
Factory Setting
ADM/Debug Mode
Factory Setting screen displays.
:ADM
Display/Key Test
The general operation on the Factory Settings screens is as
follows:
:IP5131
Display Mode
•
To view details of an item displayed on the screens
above, press the soft key that corresponds to that item.
[Set]
[Cancel]
•
Press the Set soft key to rewrite the NV-RAM data if the
ADM/Debug Mode is changed.
Config
• Press the Cancel soft key to cancel all the intended setting changes under Factory
items and to go to the IP Configurations Screen without rewriting the NV-RAM
data.
ADM/DEBUG Mode Screen
1. From the IP Configurations menu select Factory >
ADM/Debug Mode
Debug
ADM/Debug Mode. The ADM/Debug Mode screen
displays.
ADM
2. Press the Debug or ADM soft keys to change the set
value.
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
[Set]
[Cancel]
The setting is underlined in the Factory Setting screen
display.
Config
Strata CIX IP5000-series Telephone UG 07/09
165
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Display/Key Test
1. From the IP Configurations menu select Factory >
SK05
SK07
SK09
FK05
FK04
FK03
FK02
FK01
SK06
SK08
SK10
FK10
FK09
FK08
FK07
FK06
LCD Exit
Display/Key Test. The Display/Key Test Mode screen
displays.
Display/Key
Test Mode
2. Press the soft key next SK01~SK14.
The SKxx displays in the center of the screen (Key Test
mode shown right).
3. Using the Navigation button press the (right arrow)
to highlight the LCD option.
Config
TEST
4. Press the Select
.
(center of Navigation) button to scroll
through the LCD test.
5. Press any of the SK/FB buttons to scroll through the LCD tests. There are seven
tests, on the eighth keypress the Test screen will reappear.
6. To exit the Display/Key Test Mode Screen and return to the Factory Setting Screen
(TEST tab disappears).
Use the Navigation button, press (right arrow twice) to highlight Exit.
7. Press the Select
.
(center of Navigation) button to exit the Display/Key Test.
166
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Display Mode
1. From the IP Configurations menu select Factory >
Display Mode
IP5131
Display Mode. The Display Mode screen displays.
2. Press the IP5131 or Test soft keys to change the set
value.
Test
[Set]
[Cancel]
Config
The IP5131 setting allows default operation of the display as it was designed to
support 10 LCD keystrips plus 4 lines of call processing/softkey information.
USER NAME
2222
Call Processing
MAY 15 THURSDAY
08:30
One Touch
SAM
DND
Caller ID
VM Pause
VM Record
Chuck
LCD Keystrips
Soft Key
Ext 3222
Ext 2223
Ext 2222
DIR
IP5131 Standard Display
Test Mode will remove all LCD Keystrip functionality and leave the call
processing (3 lines) directly followed by soft keys (similar to a standard 4-line
display phone).
3. Press the Set soft key to accept the change.
...or press the Cancel soft key to cancel the change.
Strata CIX IP5000-series Telephone UG 07/09
167
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Initialize
Select Configuration > Initialize. The Initialize screen
Initialize
All Data
displays.
LCD
Key Repeat
Others
Network
Sound
The general operation on the Initialize screens is as
follows:
Browser
Factory
•
To view details of an item displayed on the screens
above, press the soft key that corresponds to that item.
[Exec]
[Cancel]
• You can toggle between all the items found on the
Initialize screen, except All Data. The item selected is
underlined.
Config
•
Selecting the All Data soft key selects all the items displayed on the Initialize
screen and all items are underlined.
Important! Pressing the “All Data” key twice will not cancel the selection.
• Pressing the EXEC soft key while “Network” is displayed underlined will initialize
the selected item and will rewrite the NV-RAM data and cause the screen to move
to the Resetting Selection Screen. (The Resetting Selection Screen will be
described later.)
•
•
•
•
will rewrite the NV-RAM data and go to the Configuration screen.
If no setting change is made to the items and the EXEC key is pressed, the NV-
RAM data will not be rewritten and goes to the Configuration screen.
Pressing the CANCEL soft key will not initialize and goes to the Configuration
screen.
Table 20 on page 136 shows the Initial values of Settings:
168
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator Programming
IP5131-SDL Settings
Reset
1. From the IP Configurations menu select Reset. The
Reset screen displays. This screen will also display
when you press the Set soft key after a setting change is
made in the Network, Advanced and Initialize screens.
Reset execute?
2. Press Exec to reset the terminal. Initialization of the
telephone set will begin
...or press Cancel to go back to the IP Configurations
screen.
[Exec]
[Cancel]
Note If the screen moves to the IP Configurations screen
Config
without resetting, even though there are changes in
subsidiary item settings, then “Reset” will flicker (black and white) to prompt
you to reset. Reset does not flicker if there were no setting changes in
subsidiary items.
Strata CIX IP5000-series Telephone UG 07/09
169
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
References
A
This Appendix contains table that support some of the feature operations.
Call Forward
Table 22
Feature
Call Forward Procedure
Button Sequence
Call Forward Any Call - Internal and Incoming Line Calls:
Forwards any call, whether an internal call or incoming line call.
All Calls to an ext.
Press ext. button + #6011 (tone) + dial the dest. ext. no. (tone)
All Calls to outside
telephone no.
Press ext. button + #6011 (tone) + outside line access code + dest. telephone no.
+ # (tone)
Busy to an ext.
Press ext. button + #6021 (tone) + dial the dest. ext. no. (tone)
Busy to outside
telephone no.
Press ext. button + #6021 (tone) + outside line access code + dest. telephone no.
+ # (tone)
No Answer to an ext.
Press ext. button + #6031 (tone) + dial the dest. ext. no. + timer (08~60) (tone)
No Answer to outside
telephone no.
Press ext. button + #6031 (tone) + outside line access code + dest. telephone no.
+ # (tone) + timer (08~60) (tone)
Busy No Answer to an
ext.
Press ext. button + #6041 + dial the dest. ext. no. # (tone) + timer (08~60) (tone)
Busy No Answer to
outside telephone no.
Press ext. button + #6041 + outside line access code + dest. telephone no. + # +
timer (08~60) (tone)
Cancel
Press ext. button + #6051 (tone)
Strata CIX IP5000-series Telephone UG 07/09
171
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 22
Feature
Call Forward Procedure (continued)
Button Sequence
Call Forward - Incoming Line Calls:
Forward incoming line calls only.
All Calls to an ext.
Press ext. button + #6013 (tone) + dial the dest. ext. no. (tone)
All Calls to outside
telephone no.
Press ext. button + #6013 (tone) + outside line access code + dest. telephone no.
+ # (tone)
Busy to an ext.
Press ext. button + #6023 (tone) + dial the dest. ext. no. (tone)
Busy to outside
telephone no.
Press ext. button + #6023 (tone) + outside line access code + dest. telephone no.
+ # (tone)
No Answer to an ext.
Press ext. button + #6033 + dial the dest. ext. no. (tone) + timer (08~60)
No Answer to outside
telephone no.
Press ext. button + #6033 + outside line access code + dest. telephone no. + #
(tone) + timer (08~60)
Busy No Answer to an
ext.
Press ext. button + #6043 + dial the dest. ext. no. (tone) + timer (08~60) (tone)
Busy No Answer to
outside telephone no.
Press ext. button + #6043 + outside line access code + dest. telephone no. + #
(tone) + timer (08~60) (tone)
Cancel
Press ext. button + #6053 (tone)
Call Forward Any Call - Set for Another Station:
Enables you to set call forwarding for another telephone within your telephone system. You will need the
other telephone’s Call Forward pass code in order to do this. Call Forward Pass Codes are created in system
programming.
Press ext. button + #6012 (tone) + dial the other telephone’s ext. no. + enter other
All Calls to an ext.
telephone’s Call Forward pass code + # + dest. telephone no. (tone)
Press ext. button + #6012 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # + outside line access code + dest.
telephone no. + # (tone)
All Calls to outside
telephone no.
Press ext. button + #6022 (tone) + dial the other telephone’s ext. no. + enter other
Busy to an ext.
telephone’s Call Forward pass code + # + dest. telephone no. (tone)
Press ext. button + #6022 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # + outside line access code + dest.
telephone no. + # (tone)
Busy to outside
telephone no.
Press ext. button + #6032 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code (tone) + # + dest. telephone no. (tone) + timer
No Answer to an ext.
(08~60) (tone)
Strata CIX IP5000-series Telephone UG 07/09
172
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Call Forward
Table 22
Feature
Call Forward Procedure (continued)
Button Sequence
Press ext. button + #6032 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code (tone) + # + outside line access code + dest.
telephone no. + # (tone) + timer (08~60) (tone)
No Answer to outside
telephone no.
Press ext. button + #6042 + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # (tone) + dest. telephone no. (tone) + timer
(08~60) (tone)
Busy No Answer to an
ext.
Press ext. button + #6042 + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # (tone) + outside line access code + dest.
telephone no. + # (tone) + timer (08~60) (tone)
Busy No Answer to
outside telephone no.
Press ext. button + #6052 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # (tone)
Cancel
Call Forward - Incoming Line Call - Set for Another Station:
Enables you to set forwarding of incoming line calls for another telephone within your telephone system
Press ext. button + #6014 (tone) + dial the other telephone’s ext. no. + enter other
All Calls to an ext.
telephone’s Call Forward pass code + # (tone) + dest. telephone no. (tone)
Press ext. button + #6014 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # (tone) + outside line access code + dest.
telephone no. + # (tone)
All Calls to outside
telephone no.
Press ext. button + #6024 (tone) + dial the other telephone’s ext. no. + enter other
Busy to an ext.
telephone’s Call Forward pass code + # (tone) + dest. telephone no. (tone)
Press ext. button + #6024 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # (tone) + outside line access code + dest.
telephone no. + # (tone)
Busy to outside
telephone no.
Press ext. button + #6034 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # (tone) + dest. telephone no. (tone) + timer
No Answer to an ext.
(08~60)
Press ext. button + #6034 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # (tone) + outside line access code + dest.
telephone no. + # (tone) + timer (08~60) (tone)
No Answer to outside
telephone no.
Press ext. button + #6044 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # (tone) + dest. telephone no. (tone) + timer
(08~60) (tone)
Busy No Answer to an
ext.
Press ext. button + #6044 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # (tone) + outside line access code + dest.
telephone no. + # (tone) + timer (08~60) (tone)
Busy No Answer to
outside telephone no.
Strata CIX IP5000-series Telephone UG 07/09
173
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 22
Feature
Call Forward Procedure (continued)
Button Sequence
Press ext. button + #6054 (tone) + dial the other telephone’s ext. no. + enter other
telephone’s Call Forward pass code + # (tone)
Cancel
Change Call Forward Pass Code:
Your telephone must be enabled in programming to have the ability to change pass codes.
Press ext. button + #670 (tone) + dial the dest. ext. no. (tone) + old pass code + #
(tone) + new pass code (tone) + #
Change Pass Code
Strata CIX IP5000-series Telephone UG 07/09
174
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Soft Keys
Soft Keys
The table below is a list of soft key labels that appear on the LCD telephones. Press
the soft key button associated with the label to activate the feature (SK1, SK2, SK3
and SK4).
Table 23
Soft Key Prompts
Soft Key
ABR
Definition
Activates Automatic Busy Redial after dialing a busy outside telephone number.
Activates Automatic Callback after reaching a busy station, CO line, or CO Line group.
(Busy Override) Sends a call-waiting tone to a busy station.
Initiates or completes a conference.
ACB
BUSY
CONF
EXEC
EXIT
JOIN
(Executive Override) Breaks into the conversation of a busy called station.
Exits you from a conference; remaining parties are connected.
Joins all parties to a conference while on a conference call.
Adds a CO line to an existing call while in the Conference mode. The LCD prompts you to
access a CO line after you press this key.
LINE
MESG
OVRD
Sets a message waiting indication at a busy or unanswered station.
Overrides options, busy mode, or overrides Do Not Disturb mode.
Enables you to enter a Page Group number (01~16) and send a page to the phones in that page
group.
PGE
RING
RLS
Makes a called station ring when making a voice announce call to the station.
Disconnects a call and returns telephone to the idle state.
RTRN
Terminates a feature operation and returns to a previously displayed state.
Enables you to break off from a conference call with another conference call member for a
private conversation (split). You can use the Join key to reconnect both of you back into the
conference. You must be a conference master to use this. See instructions for Conference
Split/Join/Drop for further instruction.
SPLT
Adds a station to an existing call while in the Conference mode. The LCD prompts you to dial
a station number after you press this key.
STA.
TALK
TRNS
Makes a voice announcement to a called station that is ringing.
Initiates or completes a Transfer while on an outside call.
Strata CIX IP5000-series Telephone UG 07/09
175
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Button Labels
Button Labels
The button labels in Table 24 are for the Programmable Buttons on the telephone.
Programmable buttons are the unmarked buttons on the telephone keystrip.
Table 24
Programmable Feature Button Definitions
Definitions
Button
Account Code – Press to enter a Voluntary Account Code anytime during a Central
Office (outside) line call without interrupting the conversation.
Account
Code
All Call
Page
All Call Voice Page – Press to page all of the telephones in the All Call Page group.
Automatic Busy Redial – Press to set up Automatic Busy Redial after receiving a busy
tone on a dialed outside line call (not available when calling on Tie or Direct Inward
Dialing (DID) outside lines).
Auto Busy
Redial
Automatic Callback – Press to recall a busy station or station in the Do Not Disturb (Do
Not Disturb) mode as soon as that station becomes idle or deactivates Do Not Disturb.
Also used for outside line queuing when all lines are busy.
Auto
Callback
Call Forward-All Calls – Press to forward all calls to another station or voice mail
device.
Call Frwd
All Calls
Call Forward-Busy – Press to forward calls immediately to another station or voice mail
device when your station is busy or in the Do Not Disturb mode.
Call Frwd
Busy
Call Forward-Busy/No Answer – Press to forward calls immediately to another station
or voice mail device when your station is busy or in Do Not Disturb mode. Also forwards
calls when your station is not answered after 8~60 seconds (set at your station).
Call Frwd
Busy NAns
Call Forward-No Answer – Press to forward calls to another station or voice mail device
when your station is not answered after 8~60 seconds (set at your station).
Call Frwd
No Answer
Call Forward-External – Press to forward Private or DID line calls to an external or
internal telephone number.
Call Frwd
External
Caller ID
Caller ID – Press to view the Call History list (may include name/number, date, status).
Call Pickup – Press to initiate a ringing Directed Call Pickup of outside line, extension,
and page calls.
Directed
Pickup
Do Not
Disturb
Do Not Disturb – Press to lock your station in or out of the Do not Disturb mode.
176
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Button Labels
Table 24
Button
Programmable Feature Button Definitions (continued)
Definitions
Direct Station Selection(s) – Press to ring a preselected station. The LED associated
with each DSS button provides the status (idle/busy) of the station assigned to the
button.
DSS
Flash – Press to perform the following functions: Disconnect and recall dial tone on a
outside line; access Centrex or PBX features; enter a pause or flash signal when
programming speed dial numbers.
Flash
Group Pickup – Press to pick up a call that is ringing a station that belongs to a Pickup
Group that your station is a member of.
Group
Pickup
Line
Line – Press to answer or access an outside line.
Microphone Cutoff – Press to turn the microphone off/on while idle, providing privacy
when you receive handsfree internal calls. Also functional when your station receives
calls – The Mic button controls the microphone when you originate calls.
Microphn
Cut-off
Msg Wait
Additional Messages Waiting
Night
Press to control the system’s outside line ringing pattern for after-hours incoming calls.
Transfer
Park – Press to park internal or outside calls in an orbit. Call retrieval can be made locally from
the same parking telephone or remotely from a different telephone.
Park in
Orbit
Pooled Line – Press to access an available outside line from a group of lines appearing under
one button.
Pooled Line
Grp
Privacy – Press to block Privacy Override on common outside line buttons. This button does not
block Busy Override or Executive Override.
Privacy on
Line
Privacy Release – Press to release privacy on common outside line buttons, enabling other
station users to enter your conversations on those buttons. Privacy release does not apply to
common extension buttons which are always private.
Privacy
Release
Program – Press to enter User Programming mode, which enables you to re-define
Programmable Feature Buttons to perform other functions, including programming One Touch,
Call Forward assignments, assign Message Waiting Buttons and assign BGM sources played
over the telephone speaker.
Program
Pause/Resume – Press to pause or resume recording a conversation to a voice mailbox or when
playing back the recording.
PS/RES
Record
Record to Voice Mail – Press to record current conversation to voice mailbox.
Strata CIX IP5000-series Telephone UG 07/09
177
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 24
Button
Programmable Feature Button Definitions (continued)
Definitions
Release and Answer – Press to disconnect or complete the transfer the current outside or
extension call and automatically answer the new incoming outside or extension call.
Release and
Ans
Release – Press to disconnect or complete the transfer of the current outside or extension call
and to place your station in the idle condition.
Release Call
SD or
Speed Dial – Press to Speed Dial a telephone number or feature access codes. SD buttons can be
used as either System Speed Dial numbers or Station Speed Dial numbers.
Customized
Button
Spd Dial Lng
Pause
Pause (Long) – Press to insert a 10-second pause when programming Speed Dial numbers.
Pause – Press to set either a one-half or two-second pause when programming Speed Dial
numbers. (The pause time is set in system programming).
Spd Dial
Pause
Start
Sub
Start – Press to make an outgoing call using an ISDN trunk.
Sub address – Press to enter a sub address on an ISDN trunk outgoing call.
Tel Set
Music
Background Music – Press to turn Background Music on or off over your station speaker.
Tone – Press to change the outgoing dialing of the outside line in use from dial pulse to tone
signaling.
Tone Dial
Select
Unlock Door
Door Unlock – Press to unlock a door lock mechanism.
Table 25
Programmable Feature Button Labels
LCD
Default
Label
User
Can
Rename
Feature
Name
Code
000
1 2
3
4
5
6
7
8
9
10 11 12
Unused
Key
Ext.
XXXXX
(CLID)
Ext.
XXXXX
Prime DN
Key
100
E x
t
.
x
x
x
x
x
x
Yes
Yes
Secondary/
Phantom E x
DN Key
110
t
.
x
x
x
x
(Caller ID)
Strata CIX IP5000-series Telephone UG 07/09
178
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Button Labels
Table 25
Programmable Feature Button Labels (continued)
LCD
Default
Label
Line
XXX(Caller
ID)
Line Grp
XXX(Caller
ID)
User
Can
Rename
Feature
Name
Code
120
1 2
L i
3
n
n
4
5
6
7
8
9
10 11 12
CO
e
x
x
x
Yes
Yes
CO Line
Group
130
L i
e
G
r
p
x
x
x
PL Ln
GrpXXX(C
aller ID)
Door Lock
XXX
Pooled
Line Key
140
540
560
P L
L
r
n
G
o
r
p
x
x
x
x
x
x
Yesl
Yes
Yes
Door
Unlock
PhDN
Message M W
Waiting
D o o
L
r
c
k
MW for
XXXXX
f
o
x
x
x
x
x
570
610
One Touch O n e
T
x
o
x
u
x
c
x
h
x
One Touch
DSXXXXX
XX
Yes
Yes
DSS Key
D S x
A P P
x
Application
Start-
Application
#00-#89
APP Key
900XX
900
900
900
900
K
e
o
i
y
g
l
9
0
0
n
l
X
X
Yes
Yes
Yes
Yes
Application
Start -
Application
#90
A C D
L
a
I
ACD LogIn
Application
Start -
Application
#91
Unavailabl
e
U n A V
a
k
b
U
e
i
Application
Start -
Application
#92
A C D
W o
r
n
t
WorkUnit
Strata CIX IP5000-series Telephone UG 07/09
179
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Button Labels
Table 25
Programmable Feature Button Labels (continued)
LCD
Default
Label
User
Can
Rename
Feature
Name
Code
1 2
3
4
5
6
7
8
9
10 11 12
Application
Start -
Application
#93
Application
Start -
Application
#94
Application
Start -
Application
#95
Application
Start -
Application
#96
Application
Start -
Application
#97
Application
Start -
Application
#98
Application
Start -
Application
#99
900
A C D
A C D
E n d
A C D
A C D
A C D
A C D
H
e
l
p
ACD Help
Yes
Yes
Yes
Yes
Yes
Yes
Yes
ACD
PickUp
900
900
900
900
900
900
P
i
c
a
a
n
i
k
p
p
i
U
U
U
t
p
p
p
End
WrapUp
W r
W r
M o
ACD Join
ACD
Monitor
o
r
S
S
h
t
f
t
ACD Shift
ACD
Status
a
t
u
s
180
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Connections
B
IP5000-Series Telephone Tilt Angles
The IP5000-series telephones have three tilt positions built into the base. There is also
a tilt stand extension that adds an additional 20 degrees of tilt. When the telephone is
sitting on a desk or table there are a total of six different angles of tilt available. When
wall mounted there are two angles available. See figures on the next page.
Table 26
IP5000-Series Tilt Angels
Model
Tilt Without Stand
Tilt with Stand
IP5000-series telephones
15°, 27.5°, 40°
35°, 47.5°, 60°
All Add-on and IDM modules
Strata CIX IP5000-series Telephone UG 07/09
181
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Connections
IP5000-Series Telephone Tilt Angles
IP5000-Series Desk-top Tilt Angle With Tilt-Stand Extension
-10° Tilt
0° (no) Tilt
IP5000-Series Wall Mount Angles
182
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Connections
Connector Icons
Connector Icons
The connectors on the IP5000-series telephones are identified with icons. The
connector icons and their meaning are shown below.
Icon
Function
Add-On Module (ADM) Cable Connector
AC Power Adapter (12 VDC) Input
Handset Cord
DC IN 12V
Headset Cord
External Speaker Control Box (BESCB1A) connection
IP Network Connection
PC Connection
CO LineConnection (model IP5122-SDC only)
Strata CIX IP5000-series Telephone UG 07/09
183
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Connections
Wiring
Wiring
Local Power
ACO Line (SDC Station only)
External Speaker
LAN Cable
LAN Connection
from internal switch
(optional)
Handset
Cord
ADM
cable
Headset
Cord
The IP5000-series telephones include the special long-tail handset cords
required to fit the tilt bases.
IP5000-series Telephone Connectors
184
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Centrex Application
C
Your system may be equipped with the Centrex Application, which enhances its
feature capability when installed behind a Centrex or PBX system. Your telephone
may have access to one or more of the enhanced Centrex features listed below:
Flexible Directory Numbering
A station’s extension can be three or four digits. It is, therefore, possible to match a
station’s extension and Centrex line extension number. Dial the entire station number
when indicated.
Note Some access code numbers may have been changed to avoid system numbering
plan conflicts.
Centrex Feature Buttons
You can access some Centrex features by pressing a pre-programmed Feature Button
on your telephone, instead of dialing a Centrex access code. The Centrex access code,
including the necessary flash and/or pause sequence, is activated when the button is
pressed. See your Centrex or PBX operations manual for specific details.
Ringing Repeat
The distinctive ring patterns available in your Centrex system are automatically
repeated with your digital telephone, enabling you to answer appropriately for either
outside, inside or callback calls.
Strata CIX IP5000-series Telephone UG 07/09
185
Download from Www.Somanuals.com. All Manuals Search And Download.
Centrex Application
Delayed Ringing
Delayed Ringing
Outside line or Centrex line(s) can be programmed for a 12-second and/or 24-second
ring delay at stations to permit alternate answering conditions. Answer the line when
your telephone is ringing.
186
Strata CIX IP5000-series Telephone UG 07/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
abandoned call numbers (see Call
History), 54
about this book
conventions, x
how to use this guide, x
organization, ix
browser, 10
labels, 176
related documents, xii
account codes, 44, 117, 120
calls, 43
forced, 43
verified/non-verified, 43
ACO
Cnf/Trn, 7
flexible, 33
Hold, 7
navigation, 7
Redial, 7
shift, 6
speed dial, 7
911 emergency service, 91
hold, 94
limitations, 95
volume control, 92
advisory messaging, 121
all call page, 77
alphanumeric entry, 82
ANI, 54
answer a call, 24
answering calls, 21
attendant console, 120
automatic
C
caller ID, 54, 60
call forward
busy redial, 117, 120
callback, 48
access codes, 117
Strata CIX IP5000-series Telephone UG 05/09
187
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
D ~ F
any call, 51
override, 107
station, 50
system, 50
override, 74
call history, 54
call hold, 25
calling, 21
control, 121
calling, 121
calling from SoftIPT, 39, 40
call park, 120
orbits, 55
call pickup, 56, 117, 120
held calls, 120
call waiting, 59, 75
centrex
buttons on ADMs and DSS
consoles, 104
call forward override, 107
calling, 104
application, 185
feature buttons, 185
class of service
override, 75
night transfer, 107
transferring, 105
Cnf/Trn, 7
CO line
call transfer, 58
CO line queuing, 64
conference
E
echo cancellation, 68
calls, 60, 121
hold, 26
voice mail, 61
call, 121
emergency ringdown, 69
executive override, 75
D
delayed ringing, 186
dial directory, 22
dial pad, 82
F
direct inward system access (see DISA)
directories, 82
direct station selection
buttons, 64
feature access codes, 120
flash, 117, 121
flexible buttons, 33
codes, 117
DISA
flexible directory numbering, 185
forced account codes (verified/non-
security code, 121
188
Strata CIX IP5000-series Telephone UG 05/09
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
verified), 43
G
message waiting light
messaging
group pickup, 56
H
handset calling, 21
handsfree answerback, 24
Hold, 7
advisory, 121
Msg button/LED, 27
hold, 25
line hold, 55, 58
hot dialing, 20, 21
I
N
indicators
LED, 29
IPT1020-SD, 68, 134
IPT2010-SDC, 89
ISDN
storing speed dial, 82
names (entering), 82
night ring answer, 122
buttons, 86, 178
J
join, 62
L
one touch button, 118, 119
language changes, 121
language code, 69
LCD
call forward (DSS), 107
class of service, 75
do not disturb, 74
executive, 75
LCR
dialing out, 121
LED indicators, 29
line
automatic selection, 20
ringing preference, 20
line button, 58
privacy, 76
travelling class, 123
override calls, 74
Strata CIX IP5000-series Telephone UG 05/09
189
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
P ~ V
answering, 24
start application, 123
storing speed dial names, 82
P
paging, 56, 107
park, 120
park in orbit, 55
park in orbit, 55
pickup, 56
pick up group calls, 56
privacy, 78
override, 76
Tilt Angles, 181
private network access, 122
programming
buttons, 117
R
redial, 7
U
repeat last number dialed, 122
ringing
distinctive settings, 17
ringing line preference, 24
ringing repeat, 185
voluntary account codes (verified/non-
verified), 45
S
shift key, 6
signaling
tone, 20
voice first, 20
SoftIPT
calling, 39, 40
directory, 41
soft keys, 46
2000-phone location, 33
speakerphone, 25
special characters for speed dialing, 81
speed dial, 7, 79, 118
access codes, 80, 117, 123
190
Strata CIX IP5000-series Telephone UG 05/09
Download from Www.Somanuals.com. All Manuals Search And Download.
|