Toshiba DVD Player SD 6915SU User Manual

Toshiba-SD-6915-Cover fixrev01 2004/6/04 07:27am Page 2  
5 Disc DVD Changer  
SD-6915SU  
Instruction Manual  
DISC  
EXCHANGE  
PLAY/  
PAUSE  
POWER  
OPEN/CLOSE  
STOP  
DISC SKIP  
AK68-00479A Rev01  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 4  
Precautions  
Before you start  
Table of Contents  
Setup  
CAUTION  
Accessories  
Important Safety Instructions . . . . . . . . . . . . . .2  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Before you start . . . . . . . . . . . . . . . . . . . . . . . .5  
General Features . . . . . . . . . . . . . . . . . . . . . . .6  
Disc Type and Characteristics . . . . . . . . . . . . .7  
Description-Front Panel . . . . . . . . . . . . . . . . . .8  
Display Indicators . . . . . . . . . . . . . . . . . . . . . .9  
Description-Rear Panel . . . . . . . . . . . . . . . . .10  
Tour of the Remote Control . . . . . . . . . . . . . .11  
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFOR-  
MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZ-  
ARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF.  
REFER SERVICING TO QUALIFIED PERSONNEL.  
Note:  
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.  
• This DVD player is designed and manufactured to respond to the Region Management Information.  
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,  
the DVD player cannot play the disc.  
• This device is protected by U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; and  
6,516,132. This product incorporates copyright protection technology that is protected by U.S. patents  
and other intellectual property rights. Use of this copyright protection technology must be authorized  
by Macrovision, and is intended for home and other limited viewing uses only unless  
otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.  
Batteries for  
Remote Control  
(AAA Size)  
Remote Control  
Connections  
Choosing a Connection . . . . . . . . . . . . . . . . .12  
Basic Functions  
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . .14  
Operating the Disc Changer . . . . . . . . . . . . . .15  
Using the Search & Skip Functions . . . . . . . .15  
Using the Display Function . . . . . . . . . . . . . . .16  
Using the Disc and Title Menu . . . . . . . . . . . .17  
Using the Function Menu . . . . . . . . . . . . . . . .17  
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Slow Repeat Play . . . . . . . . . . . . . . . . . . . . .18  
Program Play & Random Play . . . . . . . . . . . .19  
Handling Cautions  
• Before connecting other components to this player, be sure to turn them all off.  
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s  
internal parts may be damaged.  
• Do not put a flower vase filled with water or any small metal objects on the player.  
• Be careful not to put your hand into the disc tray.  
User’s Manual  
Video/Audio Cable  
• Do not place anything other than the disc in the disc tray.  
Install Batteries in the Remote  
1. Open the battery cover on the back of the  
remote.  
Advanced Functions  
• Exterior interference such as lightning and static electricity can affect normal operation of this player.  
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the  
AC power cord to the AC power outlet. The player will operate normally.  
• Be sure to remove the disc and turn off the player after use.  
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long  
periods of time.  
Selecting the Audio Language . . . . . . . . . . . .20  
Selecting the Subtitle Language . . . . . . . . . . .20  
Changing the Camera Angle . . . . . . . . . . . . .21  
Using the Bookmark Function . . . . . . . . . . . .21  
Using the Zoom Function . . . . . . . . . . . . . . . .22  
SACD Playback . . . . . . . . . . . . . . . . . . . . . . .23  
DVD AUDIO Playback . . . . . . . . . . . . . . . . . .24  
Clips Menu for MP3/WMA/JPEG . . . . . . . . . .26  
Folder Selection . . . . . . . . . . . . . . . . . . . . . . .26  
MP3/WMA Playback . . . . . . . . . . . . . . . . . . .27  
Picture CD Playback . . . . . . . . . . . . . . . . . . .28  
2. Insert two AAA batteries. Make sure that the  
polarities (+ and -) are aligned correctly.  
3. Replace the battery cover.  
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.  
If remote doesn’t operate properly:  
• Check the polarity + - of the batteries (Dry-Cell)  
• Check if the batteries are drained.  
Disc Storage  
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.  
• Do not keep under direct sunlight.  
• Keep in a cool ventilated area.  
• Store vertically.  
• Check if remote sensor is blocked by obstacles.  
• Check if there is any fluorescent lighting nearby.  
• Add in the distance & angle of the remote control  
with reference whit remote receiver.  
Changing Setup menu  
• Keep in a clean protection jacket.  
Using the Setup Menu . . . . . . . . . . . . . . . . . .29  
Setting Up the Language Features . . . . . . . . .29  
Setting Up the Audio Options . . . . . . . . . . . . .31  
Surround Sound Speaker Setup . . . . . . . . . . .32  
Setting Up the Display Options . . . . . . . . . . . .33  
Setting Up the Parental Control . . . . . . . . . . .34  
Maintenance of Cabinet  
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.  
• Do not use benzene, thinner, or other solvents for cleaning.  
• Wipe the cabinet with a soft cloth.  
Reference  
Controlling a TV with the Remote . . . . . . . . . .36  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .37  
Specifications . . . . . . . . . . . . . . . . . . . . . . . .38  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
ENG-4  
ENG-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 6  
General Features  
Disc Type and Characteristics  
DVD Changer  
Note  
This DVD player is capable of playing the following types of discs with the corresponding logos:  
The DVD Changer holds 5 discs and provides full  
random play with fast disc changes when press and  
hold NUMBER button.  
* Discs which cannot be played with this player.  
• DVD-ROM  
• CD-ROM  
• CDI  
• DVD-RAM  
• CDV  
Recording Types Disc Size Max. Playing Time  
Characteristics  
Disc Types (Logos)  
DVD contains excellent sound and  
video due to Dolby Digital and  
MPEG-2 system.  
Single-sided 240 min.  
DVD-VIDEO  
Excellent Sound  
Dolby Digital, a technology developed by Dolby Labo-  
ratories, provides crystal clear sound reproduction.  
• CDGs play audio only, not graphics.  
5"  
Double-sided 480 min.  
Audio  
+
* Ability to play back may depend on recording  
conditions.  
• DVD-R, +R  
Various screen and audio functions  
can be easily selected through the  
on-screen menu.  
Single-sided 80 min.  
Video  
31/2"  
Double-sided 160 min.  
• CD-RW  
Screen  
• DVD+RW, -RW  
Both regular and widescreen(16:9) pictures can be  
viewed.  
AUDIO-CD  
CD is recorded as a Digital Signal  
with better audio quality, less  
distortion and less deterioration of  
audio quality over time.  
74 min.  
20 min.  
5"  
* It may not play CD-R, CD-RW and DVD-R in all  
cases due to the type of disc or condition of the  
recording.  
Audio  
Slow Motion  
An important scene can be viewed in slow motion.  
31/2"  
Programmed Play (CD)  
DVD AUDIO is a format specifically  
designed to provide the highest  
possible audio fidelity capable on  
DVD.  
COPY PROTECTION  
Many DVD discs are encoded with copy  
protection. Because of this, you should only  
connect your DVD player directly to your TV, not  
to a VCR. Connecting to a VCR results in a  
distorted picture from copy-protected DVD discs.  
DVD AUDIO  
SACD  
Audio  
+
Video  
You can program tracks to play in desired order.  
400 min.  
74 min.  
5"  
5"  
Parental Control (DVD)  
The parental control allows users to set the level  
necessary to prohibit children from viewing harmful  
movies such as those with violence, adult subject  
matter, etc.  
SACD is a high quality audio format with  
higher sampling rates and fuller, richer  
sound as compared to regular CD.  
Audio  
This product incorporates copyright protection  
technology that is protected by methods claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Cor-  
poration, and is intended for home and other  
limited viewing uses only unless otherwise  
Various On-Screen Menu Functions  
You can select various languages (Audio/Subtitle)  
and screen angles while enjoying movies.  
Disc Markings  
Play Region Number  
Both the DVD player and the discs are coded by region.  
These regional codes must match in order for the disc to  
play. If the codes do not match, the disc will not play.  
The Region number for this player is 1.  
If region for numbers, which stand for their playable area,  
are printed on your DVD video disc and you do not find  
, disc playback will not be allowed by the player.  
If the DVD disc does not have any region number printed,  
the disc playback is not guaranteed.  
Progressive Scan  
Play Region Number  
Progressive scanning creates an improved picture  
with double the scan lines of a conventional  
interlaced picture.  
authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
NTSC broadcast system in U.S.A, Canada,  
Korea, Japan, etc.  
NTSC  
Digital Photo Viewer (JPEG)  
You can view Digital Photos on your TV.  
Dolby Digital disc  
Stereo disc  
or  
PROGRESSIVE SCAN OUTPUTS (525p/625p)  
STEREO  
Repeat  
“CONSUMERS SHOULD NOTE THAT NOT ALL  
HIGH DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE  
SCAN PICTURE PROBLEMS, IT IS RECOMMEND-  
ED THAT THE USER SWITCH THE CONNECTION  
TO THE ‘STANDARD DEFINITION’ OUTPUT.  
IF THERE ARE QUESTIONS REGARDING OUR TV  
SET COMPATIBILITY WITH THIS MODEL 525p AND  
625p DVD PLAYER, PLEASE CONTACT OUR  
CUSTOMER SERVICE CENTER.”  
You can repeat a song or movie simply by pressing  
the REPEAT button.  
DIGITAL  
SOUND  
Digital Audio disc  
MP3/WMA  
This unit can play discs created from MP3/WMA  
files.  
DTS disc  
MP3 disc  
SACD (Super Audio CD)  
SACD disc  
DVD Audio disc  
SACD is a high quality audio format with higher  
sampling rates and fuller, richer sound as compared  
to regular CD.  
DVD AUDIO  
DVD AUDIO is a format specifically designed to  
provide the highest possible audio fidelity capable  
on DVD.  
ENG-6  
ENG-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 8  
Description-Front Panel  
Display Indicators  
2
3
1
5
6
7
8 9  
DISC  
EXCHANGE  
PLAY/  
PAUSE  
OPEN/CLOSE  
STOP  
DISC SKIP  
1 2 3 4 5  
5
2
3
4
1
4
Front Panel Controls  
Front Panel Display  
1. POWER(  
Use to turn your player on and off (standby).  
)
1. Tray number / Chapter / Track Indicator  
2. Play / Pause / Forward play  
3. Disc type indicator  
6. PLAY/PAUSE (  
Begin or pause disc play.  
)
7. STOP (  
)
2. DVD CHANGER (TRAY)  
Press OPEN/CLOSE to open and close the disc  
changer.  
Stops disc play.  
8. DISC SKIP  
4. Displays various messages concerning operations such as PLAY, STOP, LOAD, ...  
no DISC : No disc loaded.  
OPEN : The disc tray is open.  
Use to skip a disc in order.  
3. FRONT DISPLAY  
Operation indicators are displayed here.  
9. DISC EXCHANGE  
Press this button when you want to change a  
disc without stopping playback of the current  
disc.  
LOAD : Player is loading disc information.  
4. REMOTE CONTROL SENSOR  
5. OPEN/CLOSE (  
Press to open and close the disc tray.  
)
5. Disc indicator  
Indicates all the discs being in tray.  
The tray number in playing twinkles.  
Important Note  
In case of initial playback after opening, the indicator inexactly displays a tray number whether or not each  
tray has a disc, please check the tray by using the DISC SKIP button.  
During playback of SACD, the indicator scrolls SACDonce after first loading and display CD.  
During playback of DVD-AUDIO, the indicator scrolls DVD-AUDIOonce after first loading and display  
DVD.  
ENG-8  
ENG-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 10  
Description-Rear Panel  
Tour of the Remote Control  
This remote control can also control most TVs. See pages 36.  
2
1
6
8. PLAY/PAUSE Button (  
)
Press and hold the button for about 2 second to  
begin/pause disc play in menu.  
9. DISPLAY Button  
Displays the current disc mode.  
10. SET UP Button  
1
2
16  
17  
DIGITAL  
OUT  
AUDIO OUT  
SURROUND  
VIDEO OUT  
Pb  
COAXIAL  
Pr  
Y
WOOFER  
525p  
3
(480p)  
Brings up the DVD players menu.  
11. CLEAR Button  
Use to remove menus or status displays from  
the screen.  
12. SUBTITLE Button  
13. AUDIO Button  
R
L
S/W  
525i  
OPTICAL  
(480i)  
18  
19  
4
S-VIDEO  
R
L
FRONT  
CENTER  
AUDIO  
VIDEO  
S-VIDEO  
5
6
7
20  
21  
22  
23  
Use this button to access various audio  
functions on a disc.  
14. DISC SKIP Button  
8
5
7
1
3
4
Use to skip a disc in order.  
Rear Panel  
1. DIGITAL AUDIO OUT JACKS  
Use a optical or coaxial digital cable to connect  
to a compatible Dolby Digital receiver.  
Use to connect to an A/V Amplifier that contains  
a Dolby Digital or DTS decoder.  
15. GROUP Button  
Use to select the GROUP.  
16. POWER Button  
24  
9
25  
26  
6. COMPONENT VIDEO OUT JACKS  
Use these jacks if you have a TV with Compo-  
nent Video in jacks. These jacks provide Pr, Pb  
and Y video. Along with Component Video pro-  
vides the best picture quality.  
Turns the DVD players power on or off.  
17. TV CH  
/
Buttons  
10  
11  
27  
28  
Channel selection.  
18. TV VOL +/- Buttons  
Control volumes.  
19. TV 100 button  
Channel number button.  
20. OPEN/CLOSE (  
12  
13  
29  
30  
If 525p(480p) Video Out is selected by setting  
Video select switch progressive scan mode will  
work.  
If 525i(480i) Video Out is selected by setting  
Video select switch interlace scan mode will  
work.  
14  
15  
2. 5.1CH ANALOG AUDIO OUT JACKS  
Connect to an amplifier with 5.1ch analog input  
jacks.  
) Button  
3. MIXED AUDIO OUT JACKS  
Connect to the Audio input jacks of your  
television, audio/video receiver.  
To open and close the disc tray.  
21. A-B REPEAT Button  
Use to mark a segment to repeat between A  
and B.  
22. PROG Button  
Allows you to program a specific order.  
23. SEARCH/SKIP Buttons (  
Allows you to search forward/backward through  
a disc. Use to skip the title, chapter or track.  
24. CURSOR Button  
25. ENTER Button  
This button functions as a toggle switch.  
26. STOP Button (  
7. Video Select Switch  
4. VIDEO OUT JACK  
Use a video cable to connect to the Video input  
jack on your television.  
The Video Output must select the 525i(480i) or  
S-Video by setting Video select switch.  
Important Note  
/
,
/
)
DVD Function Buttons  
Consult your TV Users Manual to find out if your  
TV supports Progressive Scan.  
If Progressive Scan is supported, follow the TV  
Users Manuals instructions regarding Progressive  
Scan settings in the TVs menu system.  
1. DVD Button  
DVD mode select button.  
2. TV Button  
TV mode select button.  
3. NUMBER Buttons  
4. I.SELECT Button  
TV input select.  
5. S-VIDEO OUT JACK  
Use the S-Video cable to connect this jack to  
the S-Video jack on your television for a higher  
quality picture.  
The Video Output must select the S-Video by  
setting Video select switch.  
If 525p(480p) Video Output is selected by setting  
Video select switch, Video (Composite) and  
S-Video will not work.  
)
Press and hold the button in menu for about 2 second.  
27. MENU Button  
5. STEP Button  
Brings up the Disc menu.  
Advances play one frame at a time.  
28. RETURN Button  
6. REPEAT Button  
Returns to a previous menu.  
Allows you to repeat play a title, chapter, track,  
or disc.  
29. PAGE Buttons  
Use to skip the PAGE.  
7. ZOOM Button  
Enlarges DVD picture.  
30. INDEX Buttons  
Use to skip the INDEX.  
ENG-10  
ENG-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 12  
Choosing a Connection  
Choosing a Connection  
The following shows examples of connections commonly used to connect the DVD player with a TV  
and other components.  
Connection to a TV (For Video)  
TV (Normal, Widescreen, Projection, etc..)  
Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on.  
Before Connecting the DVD Player  
Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.  
Method 1  
Method 2  
Method 3  
Method 4  
If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.  
Best  
picture  
Optimum  
picture  
Good  
picture  
Better  
picture  
Refer to the owners manual of the additional components you are connecting for more information on those  
particular components.  
Basic Audio  
TV  
Connection to an Audio System  
Method 1  
Method 2  
Method 3  
Video  
Cables  
S-Video  
Cable  
AV Cable  
OR  
OR  
AUDIO  
SYSTEM  
DVD  
Player  
5.1ch Analog Amplifier  
Audio Input Jacks  
2ch Amplifier  
Dolby Digital Decoder  
Digital Audio Input Jack  
Audio Input Jacks  
R
-
AUDIO  
-
L
VIDEO  
S-VIDEO  
Component Video  
Jacks  
(Progressive)  
Component Video  
Jacks  
Audio Output  
Jacks  
Video Output  
Jack  
S-Video  
Jack  
(Interlace)  
Method 1  
DVD Player + TV with Video Input Jack  
(The Video Output must select the S-Video or 525i(480i) by setting Video select switch.)  
Method 2  
DVD Player + TV with S-Video Input Jack  
OR  
(The Video Output must select the S-Video by setting Video select switch.)  
Method 3  
DVD Player + TV with Component Video Jacks  
(The Video Output must select the 525i(480i) by setting Video select switch.)  
DVD  
Player  
R
R
SURROUND  
FRONT  
L
S/W  
OPTICAL  
Method 4  
L
CENTER  
R
-
AUDIO  
-
L
ANALOG AUDIO OUT  
COAXIAL  
DVD Player + TV with Progressive Scan Jacks.  
(The Video Output must select the 525p(480p) by Video select switch.)  
If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on  
your TV. Then select 525p(480p) by using Video select switch.  
Analog Audio Out  
(Multi Channel)  
Analog Audio Out  
(2 Channel)  
Digital Audio Out  
If 525p(480p) Video Output is selected by setting Video select switch, Video(Composite) and S-Video will not  
work.  
Our set do not have Video output setting in setup menu.  
Note  
In case of DVD-AUDIO, SACD playback cannot use Digital Audio Out.  
In case of SACD playback cannot use multi channel or 2 channel Digital Audio out. (See page 31~32)  
Important Note  
Consult your TV Users Manual to find out if your TV supports Progressive Scan.  
If Progressive Scan is supported, follow the TV Users Manuals instructions regarding Progressive Scan  
settings in the TVs menu system.  
Depending on your TV, the Method of connection may differ from the illustration above.  
ENG-12  
ENG-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 14  
Playing a Disc  
Operating the Disc Changer  
Using the Search & Skip Functions  
7. Step Motion Play  
Before Play  
The DVD Changer holds 5 discs and provides  
full random play with fast disc changes when  
press and hold NUMBER button.  
During play, you can search quickly through a  
chapter or track or use the skip function to  
jump to the next selection.  
(Except CD/DVD-AUDIO/SACD)  
Press the STEP button on the remote during play.  
- Each time the button is pressed, a new frame will  
appear.  
- No sound is heard during STEP mode.  
- Press and hold the PLAY/PAUSE (  
normal play.  
Turn on your TV and set it to the correct Video  
Input by pressing TV/VIDEO button on.  
If you connected an external Audio System, turn  
on your Audio System and set it to the correct  
Audio Input.  
Searching through a Chapter or Track  
Exchanging Discs  
During play, press and hold the  
on the remote.  
or  
button  
) to resume  
Exchange allows you to change up to 4 discs  
except the disc currently playing.  
After plugging in the player, the first time you press  
the DVD POWER button, this screen comes up :  
If you want to select language, press a  
NUMBER button. (This screen will only appear  
when you plug in the player for the first time.)  
If you dont select language, at first time, setting  
value of Setup menu will be lost.  
(You can only perform step motion play in the forward  
direction.)  
In case of SACD, when the clip menu is off, you can use  
this function. (See page 23)  
1. Press the DISC EXCHANGE button on the front  
of the player when in the play mode.  
The tray opens with two slots available for you to  
load or change discs.  
8. Slow Motion Play  
(Except CD/DVD-AUDIO/SACD)  
Press and Hold the FWD SEARCH (  
remote during PAUSE or STEP mode.  
- By pressing the FWD SEARCH (  
select slow motion play for 1/8, 1/4 or 1/2 of normal  
speed.  
- No sound is heard during slow mode.  
- Press and hold the PLAY/PAUSE (  
normal play.  
DVD  
2X, 4X, 8X, 32X, 128X  
CD/SACD/DVD-AUDIO 2X, 4X, 8X  
button on the  
2. Press the DISC SKIP button on the remote or on  
the front of the player to turn the platter to the  
other two slots. And load or change the third and  
fourth discs.  
To change all the discs, first press the STOP  
button, then the OPEN/CLOSE and DISC SKIP  
buttons.  
) button, you can  
Skipping Tracks  
) to resume  
During play, press the  
or  
button.  
- Reverse slow motion play will not work.  
When playing a DVD/DVD-AUDIO, if you press the  
button, it moves to the next chapter. If you press the  
button, it moves to the beginning of the chapter. One more  
press makes it move to the beginning of the previous  
chapter.  
3. Press the DISC EXCHANGE or OPEN/CLOSE  
button on the front of the player to close the disc  
tray.  
RESUME function  
When you stop disc play, the player remembers  
where you stopped, so when you press and hold the  
Play  
When playing a SACD or CD, if you press the  
button, it moves to the next track. If you press the  
button, it moves to the beginning of the track. One more  
press makes it move to the beginning of the previous  
track.  
Disc Exchange  
PLAY/PAUSE (  
) button again, it will pick up  
where you left off. (unless the disc is removed or the  
player is unplugged, or if you press and hold the  
1. Press the OPEN/CLOSE button.  
The STANDBY indicator light goes out and the tray  
opens.  
STOP (  
) button twice.)  
2. Place a disc gently into the tray with the discs  
label facing up.  
Note  
If the player is left for about 5 minutes in pause  
mode, it will stop.  
3. Press and hold the PLAY/PAUSE (  
) button or  
OPEN/CLOSE button to close the disc tray.  
If the player is left in the stop mode for more than  
about 30 minutes, the power will automatically  
shut off. (Automatic Power-Off Function)  
Using the DISC SKIP function  
4. Stopping Play  
Press the STOP (  
Use the Disc Skip function to change to another  
disc currently in the disc platter.  
) button during play.  
If the player is left in the stop mode for more than  
one minute without any user interaction, a screen  
saver will be activated. Press and hold the  
5. Removing Disc  
Press the OPEN/CLOSE button.  
1. While in play or stop mode, press the DISC SKIP  
button. The platter turns clockwise to the next  
available disc.  
PLAY/PAUSE (  
This icon indicates an invalid button press.  
When menu screen is displayed, one press of  
PLAY/PAUSE ( ) button or STOP ( ) button  
) button to resume normal play.  
6. Pausing Play  
Press and hold the PLAY/PAUSE (  
on the remote during play.  
- Screen stops, no sound.  
) or STEP button  
Disc Skip  
function as the Up/down cursor. It will only activate  
the Play, Pause or Stop function when it is press  
and hold for about 2 seconds.  
- To resume, press and hold the PLAY/PAUSE (  
button once again.  
)
ENG-14  
ENG-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 16  
Using the Display Function  
Using the Disc and Title Menu  
Using the Function Menu  
To access the desired title when there is  
When Playing a DVD  
1. During play, press the DISPLAY button on the  
remote.  
Using the Disc Menu  
Using the Function Menu  
more than one in the disc.  
For example, if there is more than one  
movie on a DVD, each movie will be  
identified.  
Title  
1. During the playback of a DVD disc, press the  
SETUP button on the remote.  
1. Press the SETUP button during playback.  
2. Use the UP/DOWN buttons to highlight Function,  
then press the RIGHT or ENTER button.  
2. Use the UP/DOWN buttons to select the desired  
item.  
2. Select Disc Menu using the UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
3. Function selection screen appears: Info, Zoom,  
Bookmark, Repeat and EZ View.  
- Info (See Page 17)  
Most DVD discs are recorded in  
chapters so that you can quickly find a  
specific passage (similar to tracks on an  
audio CD).  
3. Use the LEFT/RIGHT buttons to make the  
desired setup and then press the ENTER button.  
You may use the number buttons of the remote  
control to directly access a title, chapter or to  
start the playback from the desired time.  
Chapter  
- Zoom (See Page 22)  
Track  
- Bookmark (See Page 21~22)  
- Repeat (See Page 18)  
4. To make the screen disappear, press the  
DISPLAY button again.  
- SACD/CD (See Page 23~24)  
- Angle (See Page 21)  
Allows playback of the film from a  
Time desired time. You must enter the starting  
time as a reference.  
4. Use the UP/DOWN button to highlight one of the  
6 functions. Then press the RIGHT or ENTER  
button to access the function.  
DVD  
Refers to the language of the film  
Audio soundtrack. In the example, the  
soundtrack is played in English 5.1CH.  
A DVD disc can have up to eight  
different soundtracks.  
DVD  
01  
Title  
02  
Chapter  
Using the Title Menu  
0:00:13  
Time  
ENG 5.1CH  
Audio  
1. During the playback of a DVD disc, press the  
SETUP button on the remote.  
Off  
Subtitle  
Refers to the subtitle languages  
available in the disc.  
You will be able to choose the subtitle  
languages or, if you prefer, turn them off  
from the screen.  
2. Select Title Menu using the UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
Subtitle  
A DVD disc can have up to 32 different  
subtitles.  
When Playing a CD  
1. A CD play starts.  
The DISPLAY window appears directly.  
Note  
2. Press the DISPLAY button, the display window  
disappears  
You can also directly select these functions using  
their respective buttons on the remote.  
CD  
CD  
01  
Track  
Note  
0:00:48  
Time  
Depending on a disc, the Title and Disc Menus  
may not work.  
Title Menu will only be displayed if there are at  
least two titles in the disc.  
You can also use the Disc Menu, using the MENU  
button on the remote.  
ENG-16  
ENG-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 18  
Repeat Play  
Slow Repeat Play  
Program Play & Random Play  
Repeat the current track, chapter, title, a  
chosen section (A-B), or all of the disc.  
This feature allows you slowly to repeat  
scenes containing sports, dancing, musical  
instruments being played etc. so you can  
study them more closely.  
Program Play (CD)  
Random Play (only CD-DA)  
1. Press the PROG. button.  
1. Press the PROG. button.  
2. Use the LEFT/RIGHT buttons to select  
PROGRAM. Press the ENTER button.  
2. Use the LEFT/RIGHT buttons to select RANDOM.  
Press the ENTER button.  
When playing a DVD/CD  
1. Press the REPEAT button on the remote.  
Repeat screen appears.  
When playing a DVD  
3. Use the LEFT/RIGHT/UP/DOWN buttons to  
select the first track to add to the program.  
Press the ENTER button. The selection numbers  
appear in the Program Order box.  
3. You can see the RANDOM 1/2/3, choose a  
number by using the LEFT/RIGHT buttons and  
then press the ENTER button.  
1. During play, press and hold the PLAY/PAUSE  
2. Select Chapter, Title or A-B using the  
LEFT/RIGHT buttons.  
(
) button.  
- Random 1: Plays all the tracks on a single disc  
in random order and then stop.  
Chapter (  
) : repeats the chapter that is playing.  
2. Press and hold the  
button on the remote  
4. Press and hold the PLAY/PAUSE (  
The disc will be played in programmed order.  
) button.  
Title ( T ) : repeats the title that is playing.  
A-B : repeats a segment of the disc that you select.  
during PAUSE or STEP mode. Press again and  
you can select slow motion play for 1/8, 1/4 and  
1/2 of normal speed.  
- Random 2 : Plays all the tracks on current disc  
in random order and then plays all  
the tracks on each succeeding disc  
in random order and then stops.  
DVD  
PROGRAM  
RANDOM  
3. Press the A-B RPT button to select the point  
where the function starts. (A)  
REPEAT ENTER  
Off  
01  
01 A - B  
T
- Random 3 : Plays 3 tracks randomly from a disc  
and then plays 3 tracks randomly  
on other discs until all CD discs  
turn twice.  
4. Press the A-B RPT button to select the point  
where the function ends. (B)  
4. To return to normal playback, press CLEAR  
button.  
CD  
Note  
REPEAT ENTER  
Off  
T
01  
D
01 A - B  
The disc will play from A to B repeatedly at the  
PROGRAM 01  
PROGRAM  
RANDOM  
speed you chose.  
Track  
Program Order  
- - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
- - - - - - - -  
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
To terminate the function, press the CLEAR button or  
A-B RPT button again.  
* A-B REPEAT  
Press the REPEAT button. Select A-B on screen with  
the LEFT/RIGHT buttons or press the A-B RPT button  
on the remote.  
CLEAR  
R1  
R2  
R3  
Press ENTER at the point where you want the repeat  
play to start (A). The B is automatically highlighted.  
Press ENTER at the point where you want the repeat  
play to stop (B).  
CD  
01  
Track  
To terminate the function, press the CLEAR button or  
A-B RPT button again.  
0:00:48  
Random  
Time  
1
Random  
A-B REPEAT does not allow you to set point (B) until at  
least 5 seconds has elapsed after point (A) has been  
set.  
3. Press ENTER.  
Note  
4. To return to normal play, press REPEAT again,  
then press the LEFT/RIGHT buttons to select Off  
and press ENTER.  
Depending on a disc, the Program and Random  
Play functions may not work.  
This unit can support a maximum of 20  
programmed tracks.  
Note  
While in playback mode, press the CLEAR button  
on the remote control to cancel Programmed Play  
or Random Play.  
DVD repeats play by chapter or title, CD repeats  
play by disc or track.  
Depending on a disc, the Repeat function may not  
work.  
During EXCHANGE function, Random play doesnt  
work.  
ENG-18  
ENG-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 20  
Selecting the Audio Language  
Selecting the Subtitle Language  
Changing the Camera Angle  
Using the Bookmark Function  
You can select a desired language quickly and  
easily with the AUDIO button.  
You can select a desired subtitle quickly and  
easily with the SUBTITLE button.  
When a DVD contains multiple angles of a  
particular scene, you can use the ANGLE  
function.  
This feature lets you bookmark sections of a  
DVD so you can quickly find them at a later  
time.  
Using the AUDIO button  
Using the SUBTITLE button  
Using the ANGLE Function  
Using the Bookmark Function (DVD)  
1. Press the AUDIO button.  
1. Press the SUBTITLE button.  
1. During play, press the SETUP button on the  
remote.  
If the disc contains multiple angles, the ANGLE  
mark appears on the screen.  
2. The Audio changes when the button is pressed  
repeatedly.  
2. The subtitle changes when the button is pressed  
repeatedly.  
- The audio languages are represented by abbreviations.  
2. Use the UP/DOWN buttons to highlight Function,  
then press the RIGHT or ENTER button.  
1. Press the SETUP button and select the angle in  
Function, then ANGLE icon will appear with the  
current angle number and the number of angles  
available.  
3. To turn off the display, press the CLEAR or  
RETURN button.  
- Initially, the subtitle will not appear on screen.  
- The subtitle languages are represented by  
abbreviations.  
3. Press the AUDIO button to select Stereo, Left or  
Right. (On CD)  
3. Select Bookmark using the UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
DVD  
2. Select the desire angle by using the LEFT/RIGHT  
button and press ENTER.  
4. Use the LEFT/RIGHT buttons to move to the  
desired bookmark icon.  
AUDIO  
ENG DOLBY DIGITAL 5.1CH  
SUBTITLE  
ENG  
3. To remove the ANGLE icon, press the CLEAR or  
RETURN button.  
5. When you reach the scene you want to mark,  
press the ENTER button. The icon will change to  
a number (1, 2, or 3).  
CD  
AUDIO  
Stereo  
ANGLE  
4/6  
Note  
Note  
This function depends on what languages are  
encoded on the disc and may not work with all  
DVDs.  
This function depends on what languages are  
encoded on the disc and may not work with all  
DVDs.  
A DVD disc can contain up to 8 audio languages.  
A DVD disc can contain up to 32 subtitle  
languages.  
Note  
Note  
How to have the same audio language come up  
whenever you play a DVD;  
Refer to Setting Up the Language Featureson  
page 30.  
If the disc has only one angle, this feature wont  
work. Currently, very few discs have this feature.  
If you want to playback the marked scene press  
and hold PLAY/PAUSE button (  
lighted number.  
How to have the same subtitle language come  
up whenever you play a DVD;  
Refer to Setting Up the Language Featureson  
page 31.  
) at the High-  
ENG-20  
ENG-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 22  
Using the Bookmark Function  
Using the Zoom Function  
SACD Playback  
1. Open the disc tray.  
Recalling a Marked Scene  
Using the Zoom Function (DVD)  
SACD Clips Menu Off Play Function  
1. In Stop mode, press the MENU button until the  
Clips menu is off.  
2. Place the SACD disc on the tray.  
- Place the SACD disc with the labeled side up.  
1. During play, press the SETUP button on the  
remote and select the Bookmark.  
1. During play or pause mode, press the ZOOM  
button on the remote.  
A Zoom mark will be displayed on screen.  
2. Press and hold the PLAY/PAUSE (  
) button.  
3. Close the tray.  
- The tray closes and you should get a screen  
that looks like the one below.  
2. Use the LEFT/RIGHT buttons to select a marked  
scene.  
3. The Display appears directly. A SACD play starts  
in Menu Off mode.  
2. Use the UP/DOWN or LEFT/RIGHT buttons to  
select the part of the screen you want to zoom in  
on.  
3. Press and hold the PLAY/PAUSE (  
skip to the marked scene.  
) button to  
4. Use the UP/DOWN buttons to select the desired  
item.  
3. Press the ENTER button.  
- During DVD play, press ENTER to zoom in  
2X/4X/2X/Normal in order.  
SACD  
O ff  
SACD  
00:00:23  
2CH  
MULTI  
01  
Track  
0 0 1 . West Side Story  
:
MUSIC  
1
0:00:13  
Time  
0 0 2 . West Side Story  
0 0 3 . West Side Story  
0 0 4 . West Side Story  
0 0 5 . West Side Story  
0 0 6 . West Side Story  
:
:
:
:
:
MUSIC  
MUSIC  
MUSIC  
MUSIC  
MUSIC  
2
3
4
5
6
MULTI  
Audio  
West Side Story  
:
Prologue  
REPEAT  
DISPLAY  
R
E
P
E
A T  
D
I
S
P
L
A Y  
5. Use the LEFT/RIGHT buttons to make the  
desired setup and then press ENTER.  
You may use the number buttons of the remote  
control to directly access a track and to start the  
playback from the desired time.  
SACD Clips Menu On Play Function  
Clearing a Bookmark  
1. Use the UP/DOWN buttons to select a music title.  
1. During play, press the SETUP button on the  
remote and select the Bookmark.  
2. Press the ENTER button to begin playback of the  
music title.  
- If you want to use the Repeat Function, press the  
REPEAT button to change the mode, such as Off,  
Track, Disc.  
6. To make the screen disappear, press the  
DISPLAY button.  
2. Use the LEFT/RIGHT buttons to select the  
bookmark number you want to delete.  
To access the desired Track when there  
3. Press the CLEAR button to delete a bookmark  
number.  
*Off : Normal Playback  
is more than one in the disc.  
Track  
Time  
*Track : Repeats the current music track.  
*Disc : Repeats the music disc in the SACD.  
- If you want to see information about the Disc title  
and Artist, press the DISPLAY button.  
- During play or stop mode, you can change the  
2CH or MULTI mode use LEFT/RIGHT button.  
- On the stop mode, press the SETUP button and  
select the SACD/CD in Function to playback in  
regular CD mode.  
Allows playback from a desired time by  
using the number buttons.  
Note  
If you want to change the 2channel or  
multi channel play or stop mode, press  
AUDIO button.  
Up to three scenes may be marked at a time.  
Depending on a disc, the Bookmark function may  
not work.  
Audio  
- 2CH : L, R  
- MULTI : F/L, F/R, R/L, R/R, C/T, S/W  
Note  
Note  
You can use this function when SACD disc  
You can use this function when SACD disc  
includes multi channel and 2 channel audio  
format.  
includes multi channel and 2 channel audio format.  
ENG-22  
ENG-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 24  
SACD Playback  
DVD AUDIO Playback  
DVD AUDIO Playback  
1. Open the disc tray.  
Most DVD AUDIO discs are recorded in  
Group Group, you can change Groups with this  
CD Layer Play Function  
REPEAT Play  
1. Press the REPEAT button on the remote.  
2. Select Title, Group using the LEFT/RIGHT button.  
3. Press ENTER.  
At SACD disc stop mode, press the SETUP button  
and select the SACD/CD in Function by using  
LEFT/RIGHT/UP/DOWN and then press the ENTER  
button. You can playback CD layer in SACD disc.  
(Refer to the page 16 to setting CD playback Func-  
tion).  
2. Place the DVD AUDIO disc on the tray.  
Function.  
-
Place the DVD AUDIO disc with the labeled side up.  
Note  
3. Close the tray.  
- The tray closes and disc plays.  
* Bonus Group playback.  
Some DVD AUDIO discs have Bonus  
groups. If you want to play a Bonus  
group you must enter the Bonus Group  
code. The code is usually on DVD  
AUDIO disc case.  
REPEAT ENTER  
Off  
01  
01  
T
G
Using the Display Function  
1. During play, press the DISPLAY button on the  
remote.  
To access the desired Track when there is  
2. Use the UP/DOWN buttons to select the desired  
item.  
more than one on the DVD AUDIO disc.  
Track  
Page  
If pages are included with the  
DVD-AUDIO, you can see this icon.  
To access the desired page, you can  
use this Function.  
3. Use the LEFT/RIGHT buttons to make the  
desired setup and then press ENTER.  
You may use the number buttons of the remote  
control to directly access a Group, Track, Page  
or to start the playback from the desired time.  
CD  
01  
Track  
AUDIO Format Display  
If a slide show is included with the  
DVD-AUDIO, you can see this icon.  
In this case you cannot use PAGE  
UP/DOWN buttons.  
0:00:13  
Time  
4. To make the screen disappear, press the  
DISPLAY button again.  
Slide  
During DVD AUDIO playback, press the AUDIO  
button to see AUDIO Format information.  
LPCM : Linear Pulse Code Modulation.  
Not compressed Audio data format.  
PPCM : Packet Pulse Code Modulation.  
Lossless compressed Audio data format.  
DVD AUDIO  
If a video zone is included with the  
DVD-AUDIO, you can see this icon.  
In this case you cannot use PAGE  
UP/DOWN buttons.  
01  
Group  
V-zone  
Time  
01  
Track  
01  
Page  
0:00:13  
Time  
To access the desired Track when there  
Allows playback of the music from a  
desired time by using the number buttons.  
is more than one in the disc.  
Track  
Time  
PPCM 5.1CH  
Allows playback from a desired time.  
You must enter the starting time as a  
reference.  
Group, Index, Page Function  
- Use the GROUP button to change a group.  
- Use PAGE UP/DOWN buttons to Skip the Page  
when there is more than one in a group.  
Some DVD-AUDIO discs include a slide show.  
In the slide show mode, this function can not use.  
PAGE is still images. You can see the still images  
when DVD-AUDIO disc plays .  
Note  
Some DVD-AUDIO discs dont audio down-mixing.  
These discs always output 5.1ch analog audio  
regardless of audio setup.  
Note  
Some SACD discs do not include a CD layer.  
Note  
Depending on a disc, this function may not work.  
Some DVD-AUDIO discs dont allow audio  
down-mixing. These discs always output 5.1ch  
analog audio regardless of audio setup.  
- Use INDEX +/- buttons to Skip the Index when  
there is more than one in a track.  
Note Depending on a disc, this function may not work.  
ENG-24  
ENG-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 26  
Clips Menu for MP3/WMA/JPEG  
Folder Selection  
MP3/WMA Playback  
1. Open the disc tray.  
Discs with MP3/WMA/JPEG contain individual  
song or pictures that can be organized into  
folders as shown below.  
They are similar to how you use your  
computer to put files into different folders.  
The folder can only be selected in the Stop  
mode.  
CD-R MP3/WMA discs  
When you record MP3 or WMA files on CD-R,  
please refer to the following.  
2. Place the disc on the tray.  
- Place the disc with the labeled side up.  
To select the Parent Folder  
Your MP3 or WMA files should be ISO 9660 or JOLIET  
format.  
ISO 9660 format and Joliet MP3 or WMA files are  
compatible with Microsoft's DOS and Windows, and with  
Apple's Mac. This format is the most widely used.  
Press the RETURN button to go to parent folder,  
or use the UP/DOWN buttons to select ..and  
press ENTER to go to the parent folder.  
3. Close the tray.  
- The tray closes and you should get a screen  
that looks like the one below.  
1. Open the disc tray.  
2. Place the disc on the tray.  
- Place the disc with the labeled side up.  
To select the Peer Folder  
Use the LEFT/RIGHT buttons to highlight left  
window. Use the UP/DOWN buttons to select the  
desired folder, then press ENTER.  
MP3/WMA Play Function  
When naming your MP3 or WMA files, do not exceed 8  
characters, and enter .mp3, .wmaas the file  
extension.  
General name format of: Title.mp3. or Title.wma.  
When composing your title, make sure that you use 8  
characters or less, have no spaces in the name, and  
avoid the use of special characters including: (.,/,\,=,+).  
3. Close the tray.  
- The tray closes and you should get a screen  
that looks like the one below.  
1. Select the desired folder.  
2. Use the UP/DOWN or LEFT/RIGHT buttons to  
select a song file.  
To select the Sub-Folder  
O ff  
Use the LEFT/RIGHT buttons to highlight right  
window. Use the UP/DOWN buttons to select the  
desired folder, then press ENTER.  
3. Press ENTER to begin playback of the song file.  
00:00:23  
1_mp3  
Use a decompression transfer rate of at least 128  
Kbps when recording MP3 files.  
B e c a u s e Yo u  
C a c t u s  
O ff  
Sound quality with MP3 files basically depends on the rate  
of compression/decompression you choose. Getting CD  
audio sound requires an analog/digital sampling rate, that  
is conversion to MP3 format, of at least 128 Kbps and up  
to 160 Kbps. However, choosing higher rates, like 192  
Kbps or more, only rarely give better sound quality.  
Conversely, files with decompression rates below 128  
Kbps will not be played properly.  
Sad Day  
Root  
00:00:23  
1_mp3  
WMA  
JPEG  
B e c a u s e Yo u  
C a c t u s  
Sad Day  
MP3  
Parent Folder  
Parent Folder, Current Folder Folders and Files in  
and Peer Folders Current Folder  
MUSIC  
Current Folder  
Use a decompression transfer rate of at least 64Kbps  
when recording WMA files.  
: Name of currently playing file.  
: Current Playback Time.  
1st  
Sound quality with WMA files basically depends on the  
rate of compression/decompression you choose.  
Getting CD audio sound requires an analog/digital  
sampling rate, that is conversion to WMA format, of at  
least 64Kbps and up to 192Kbps.  
Sub-Folders  
2nd  
Repeat/Random playback  
SONG FILE 1  
SONG FILE 2  
Press the REPEAT button to change playback  
mode. There are 4 modes, such as Off, Track,  
Folder and Random.  
: Current Playback Mode : There are 4  
modes. They can be selected in order by  
pressing the REPEAT button.  
Peer Folders  
Conversely, files with decompression rates below 64Kbps  
or over 192Kbps will not be played properly.  
- Off : Normal Playback  
SONG FILE 3  
- Off : Normal Playback  
- Track : Repeats the current song file.  
- Folder : Repeats the song files which have the  
same extension in the current folder.  
- Random : Song files which have the same  
extension will be played in random  
order.  
Do not try recording copyright protected MP3 files.  
Certain "secured" files are encrypted and code protected  
to prevent illegal copying. These files are of the following  
types: Windows MediaTM (registered trade mark of  
Microsoft Inc) and SDMITM (registered trade mark of The  
SDMI Foundation). You cannot copy such files.  
- Track : Repeats the current track.  
- Folder : Repeats the current folder.  
- Random : Files in the disc will be played  
in random order.  
: MP3 file icon.  
: WMA file icon.  
: JPEG file icon.  
: Folder icon.  
Important: The above recommendations cannot be taken  
as a guarantee that the DVD player will play MP3  
* To resume normal play, press the CLEAR button.  
recordings, or as an assurance of sound quality. You  
should note that certain technologies and methods for  
MP3 file recording on CD-Rs prevent optimal playback of  
these files on your DVD player (degraded sound quality  
and in some cases, inability of the player to read the files).  
This unit can play a maximum of 3000 files and 300  
folders per disc.  
: Current Folder icon.  
ENG-26  
ENG-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 28  
Picture CD Playback  
Using the Setup Menu  
Setting Up the Language Features  
1. Select the desired folder. (See page 26 to select  
the folder)  
Note  
The Setup menu lets you customize your DVD  
player by allowing you to select various  
language preferences, set up a parental level,  
even adjust the player to the type of television  
screen you have.  
If you set the player menu, disc menu, audio  
and subtitle language in advance, they will  
come up automatically every time you watch a  
movie.  
If no buttons on the remote control pressed for 10  
seconds, the menu will disappear.  
Press the DISPLAY button on the remote control to  
display the menu again.  
Press and hold the STOP button to return to the  
clips menu.  
When playing a Kodak Picture CD, the unit  
displays the Photo directly, not the clips menu.  
2. Use the UP/DOWN buttons to select a Picture file in  
clips menu and then press the ENTER button. You  
should get a screen that looks like the one below.  
Using the Player Menu Language  
1. With the unit in Stop mode, press the SETUP  
button on the remote. Select Setup using  
UP/DOWN buttons, then press the RIGHT or  
ENTER button.  
1. With the unit in Stop mode, press the SETUP  
button.  
ENTER RETURN  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
CD-R JPEG Discs  
Only files with the ".jpg" and ".JPG" extensions can  
be played.  
Language Setup : Setup of the Language.  
3. Select Language Setup using UP/DOWN  
buttons, then press the RIGHT or ENTER button.  
Audio Setup : Setup of the Audio Options  
Use the DISPLAY button on the remote control to  
select the menu you want to view and then press the  
ENTER button.  
If the disc is not closed, it will take longer to start  
playing and not all of the recorded files may be  
played.  
Display Setup : Setup of the Display Options  
Use to select which type of screen you want to  
watch and several display options.  
: Returns to the Album Screen.  
Only CD-R discs with JPEG files in ISO 9660 or Joliet  
Parental Setup : Setup of the Parental Level  
Allows users to set the level necessary to  
prevent children from viewing unsuitable  
movies such as those with violence, adult  
subject matter, etc.  
format can be played.  
To see the next 6 pictures, press the  
button.  
button.  
The name of the JPEG file may not be longer than 8  
characters and should contain no blank spaces or  
special characters (. / = +).  
To see the previous 6 pictures, press the  
4. Select Player Menu using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
: Each time the ENTER button is pressed, the  
Only a consecutively written multisession disc can be  
played. If there is a blank segment in the multisession  
disc, the disc can be played only up to the blank  
segment.  
picture rotates 90 degrees clockwise.  
LANGUAGE SETUP  
: Each time the ENTER button is pressed, the  
picture is enlarged up to 4X.  
Disc Menu  
Title Menu  
A maximum of 3000 images can be stored on a single  
CD.  
(Normal 2X 4X 2X Normal)  
Function  
Setup  
The unit enters slide show mode.  
Slide  
Kodak Picture CDs are recommended.  
When playing a Kodak Picture CD, only the JPEG  
files in the pictures folder can be played.  
*Before beginning the Slide Show, the picture interval  
must be set.  
5. Use the UP/DOWN buttons to select the desired  
language.  
Kodak Picture CD : The JPEG files in the pictures  
folder can be played automatically.  
ENTER RETURN  
TIMER:  
2. Use the UP/DOWN buttons on the remote to  
access the different features.  
Konica Picture CD : If you want to see the Picture,  
select the JPEG files in the clips menu.  
Fuji Picture CD : If you want to see the Picture, select  
the JPEG files in the clips menu.  
3. Press the ENTER button to access the sub  
features.  
QSS Picture CD : The unit cannot play QSS Picture  
CD.  
: When this icon is selected and ENTER is  
pressed, the pictures change automatically  
with about a 6 second interval.  
To make the setup screen disappear after setting  
up, press the SETUP button again.  
If the number of files in 1 Disc is over 3000, only 3000  
JPEG files can be played.  
6. Press the ENTER button.  
If the number of folders in 1 Disc is over 300, only  
JPEG files in 300 folders can be played.  
: The pictures change automatically with about  
a 12 second interval.  
Note  
- The language is selected and the screen returns to  
LANGUAGE SETUP menu.  
- To make the SETUP menu disappear, press the  
RETURN or LEFT button.  
Depending on a disc, some Setup Menu selections  
may not work.  
: The pictures change automatically with about  
a 18 second interval.  
*Depending on a file size, the amount of time between  
each picture may be different from the manual.  
*If you dont press any button, the slide show will start  
automatically in about 10 seconds by default.  
ENG-28  
ENG-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 30  
Setting Up the Language Features  
Setting Up the Language Features  
Setting Up the Language Features  
Setting Up the Audio Options  
1. With the unit in Stop mode, press the SETUP  
button.  
Using the Disc Menu Language  
Using the Audio Language  
Using the Subtitle Language  
This function changes the text language only on the  
disc menu screens.  
1. With the unit in Stop mode, press the SETUP  
button.  
1. With the unit in Stop mode, press the SETUP  
button.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
1. With the unit in Stop mode, press the SETUP  
button.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
3. Select Audio Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
2. Select Setup using UP/DOWN buttons, then  
3. Select Language Setup using UP/DOWN  
3. Select Language Setup using UP/DOWN  
press the RIGHT or ENTER button.  
buttons, then press the RIGHT or ENTER button.  
buttons, then press the RIGHT or ENTER button.  
3. Select Language Setup using UP/DOWN  
4. Select Audio using UP/DOWN buttons, then  
4. Select Subtitle using UP/DOWN buttons, then  
buttons, then press the RIGHT or ENTER button.  
press the RIGHT or ENTER button.  
press the RIGHT or ENTER button.  
4. Select Disc Menu using UP/DOWN buttons, then  
5. Use the UP/DOWN buttons to select the desired  
5. Use the UP/DOWN buttons to select the desired  
press the RIGHT or ENTER button.  
language.  
language.  
- Select Originalif you want the default soundtrack  
language to be the original language the disc is  
recorded in.  
- Select Automaticif you want the subtitle language to  
be the same as the language selected as the audio  
preference.  
5. Use the UP/DOWN buttons to select the desired  
language.  
- Select Othersif the language you want is not listed.  
- Select Othersif the language you want is not listed.  
- Select Othersif the language you want is not listed.  
Some discs may not contain the language you select  
as your initial language; in that case the disc will use its  
original language setting.  
4. Use the UP/DOWN buttons to select the desired  
item. Then press the RIGHT or ENTER button.  
AUDIO LANGUAGE  
DISC MENU LANGUAGE  
AUDIO SETUP  
Disc Menu  
Audio  
Digitall Output  
:
PCM  
SUBTITLE LANGUAGE  
Autommatic  
DTS  
:
:
:
Off  
On  
On  
Dynamic Compression  
PCM Down Sampling  
Speaker Setup  
Original  
Others  
Others  
Subtitle  
Others  
6. Press the ENTER button.  
- The language is selected and the screen returns to  
6. Press the ENTER button.  
- The language is selected and the screen returns to  
LANGUAGE SETUP menu.  
Digital Output  
LANGUAGE SETUP menu.  
6. Press the ENTER button.  
- The language is selected and the screen returns to  
LANGUAGE SETUP menu.  
1. PCM : Converts to PCM(2CH) 48kHz audio. Select  
PCM when using the Analog Audio Outputs.  
2. Bitstream : Converts to Dolby Digital Bitstream  
(5.1CH). Select Bitstream when using the  
Digital Audio Output.  
Note  
Note Even when PCM Down sampling is Off  
If the selected language is not recorded on the  
disc, the original pre-recorded language is  
selected.  
Some discs will only output down sampled  
audio through the digital outputs.  
High sampling rate DVD-Audio discs  
(192KHz or 176.4KHz) always output audio  
down sampled to 96KHz or 88.2KHz through  
the digital outputs.  
How to make the SETUP menu disappear or  
return to menu screen during set up;  
Press RETURN or LEFT button.  
When playing LPCM or PPCM DVD  
protected by copyright. If digital audio source  
is 48KHz/16bit the Digital output is mute.  
ENG-30  
ENG-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 32  
Setting Up the Audio Options  
Surround Sound Speaker Setup  
Surround Sound Speaker Setup  
Setting Up the Display Options  
DTS  
1. With the unit in Stop mode, press the SETUP  
button.  
The default settings : FRONT L, R (Small),  
CENTER (Small), SURROUND (Small) Select the  
size of the speakers to be connected.  
1. With the unit in Stop mode, press the SETUP  
button.  
1. Off : Doesnt output digital signal.  
2. On : Outputs DTS Bitstream via digital output only.  
Select DTS when connecting to a DTS Decoder.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
Front (FL, FR)  
- Large: Normally select this.  
- Small: When the sound distorts or the surround  
sound effects are difficult to hear, select this.  
This activates the Dolby Digital bass redirection  
circuitry and outputs the bass frequencies of the  
speaker from the subwoofer.  
Note There is no analog audio output when you play  
DTS sound disc.  
3. Select Audio Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
3. Select Display Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
Dynamic Compression  
1. On : To select dynamic compression.  
2. Off : To select the standard range.  
PCM Down Sampling  
Center  
1. On : Select this when the amplifier connected to the  
player is not 96KHz compatible. In this case, the  
96KHz signals will be down converted to 48KHZ.  
- None: If you do not connect a center speaker,  
select this.  
- Large: Normally select this.  
2. Off : Select this when the amplifier connected to the  
player is 96KHz compatible. In this case, all  
signals will be output without any changes.  
- Small: When the sound distorts, select this.  
This activates the Dolby Digital bass redirection  
circuitry and outputs the bass frequencies of the  
center speaker from other speakers.  
4. Use the UP/DOWN buttons to select the desired  
item. Then press the RIGHT or ENTER button.  
Speaker Setup  
Surround (SL, SR)  
- None: If you do not connect a surround speaker,  
select this.  
4. Use the UP/DOWN buttons to select Speaker  
Setup. Then press the RIGHT or ENTER button.  
Note  
DISPLAY SETUP  
- Large (Rear/Side): Normally select either of these  
according to the rear speakers position.  
- Small (Rear/Side): When the sound distorts or the  
surround sound effects are difficult to hear, select  
either of these according to the rear speakers  
position. This activates the Dolby Digital bass  
redirection circuitry and outputs the bass  
frequencies of the rear speaker from other  
speakers.  
How to make the SETUP menu disappear or  
return to menu screen during set up;  
Press RETURN or LEFT button.  
TV Aspect  
:
:
:
:
:
Wide  
Auto  
On  
AUDIO SETUP  
Still Mode  
Digital Output  
:
PCM  
Screen Messages  
Front Display  
Black Level  
Auto Dim  
On  
DTS  
:
:
:
Off  
On  
On  
Dynamic Compression  
PCM Down Sampling  
Speaker Setup  
Manufactured under license from Dolby Laborato-  
ries. Dolbyand the double-D symbol are trade-  
marks of Dolby Laboratories.  
• “DTSand DTS Digital Outare trademarks of  
Digital Theater Systems, Inc.  
In case of DVD-Audio  
TV Aspect  
Digital output discs will be output as 2 channel  
Discs that prohibit downmixing also mute the  
digital output.  
5. Use the UP/DOWN or LEFT/RIGHT buttons to  
select the desired item. Then press the ENTER  
button.  
Setting up TEST  
Depending on the type of television you have, you may  
want to adjust the screen setting (aspect ratio).  
The test output signals come clockwise starting from  
the Front Speaker(L). Adjust Channel Balance to  
match to the volume of test signals memorized in  
the system.  
1. 4:3 Letter Box : Select when you want to see the total  
16:9 ratio screen DVD supplies, even though you  
have a TV with a 4:3 ratio screen. Black bars will  
appear at the top and bottom of the screen.  
In case of SACD  
Digital output is mute.  
SPEAKER SETUP  
2. 4:3 Pan Scan : Select this for conventional size TVs  
when you want to see the central portion of the 16:9  
screen. (Extreme left and right side of movie picture  
will be cut off.)  
FRONT(L) CENTER SUBWOOFER (LFE)➝  
FRONT(R) SURROUND(R) SURROUND(L)  
On  
3. 16:9 Wide : You can view the full 16:9 picture on your  
widescreen TV.  
Note  
How to make the SETUP menu disappear or return  
to menu screen during set up. Press RETURN or  
LEFT button.  
The subwoofer test output signal is lower than the  
other speakers.  
The MPEG Multichannel logo is a trademark  
registered by PHILIPS Corporation.  
If you Set Front (FL, FR) Small, LFE is sat On”  
automatically.  
ENG-32  
ENG-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 34  
Setting Up the Display Options  
Setting Up the Parental Control  
Setting Up the Parental Control  
CREATE PASSWORD  
The Parental Control function works in conjunction  
with DVDs that have been assigned a rating - which  
helps you control the types of DVDs that your family  
watches. There are up to 8 rating levels on a disc.  
5. Select Rating Level using UP/DOWN buttons,  
and press ENTER or RIGHT button.  
Still Mode  
These options will help prevent picture shake in still  
mode and display small text clearer.  
Re-enter Password  
1. Auto : When selecting Auto, Field/Frame mode will be  
automatically converted.  
-
-
-
-
2. Field : Select this feature when the screen shakes in  
the Auto mode.  
1. With the unit in Stop mode, press the SETUP  
button.  
0 ~ 9  
3. Frame : Select this feature when you want to see  
small letters more clearly in the Auto mode.  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
Screen Messages  
Use to turn on-screen messages On or Off.  
3. Select Parental Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
Front Display  
6. Select Rating Level you want using UP/DOWN  
buttons. For example, if you select up to Level 6,  
discs that contain Level 7, 8 will not play.  
- To cancel the Rating Level, select No using RIGHT or  
ENTER in Use Password.  
Adjust the brightness of the units front panel display.  
1. Auto Dim : Makes the Front Panel Display dim  
automatically when playing a DVD.  
2. Bright : Makes the Front Panel Display bright.  
3. Dim : Makes the Front Panel Display dim.  
Black Level  
Adjusts the brightness of the screen.(On/Off)  
Setting Up the Rating Level  
e.g) Setting up in LEVEL6.  
1. With the unit in Stop mode, press the SETUP button.  
RATING LEVEL  
4. Use RIGHT or ENTER to select Yes if you want  
to use a password.  
The Enter Password screen appears.  
Level 8 Adult  
Level 7  
Level 6  
Level 5  
Level 4  
2. Select Setup using UP/DOWN buttons, then  
press the RIGHT or ENTER button.  
The player is locked (  
).  
Level 3  
Level 2  
Level 1 Kids Safe  
PARENTAL SETUP  
Use Passsword  
:
No  
About the Change Password;  
- Highlight Change Password using UP/DOWN buttons.  
- Press ENTER button.  
The Change Password screen appears.  
- Enter your new password. Enter the new password again.  
5. Enter your password.  
The Re-enter Password screen appears to  
confirm the password.  
3. Select Parental Setup using UP/DOWN buttons,  
then press the RIGHT or ENTER button.  
Enter your password again.  
4. Enter your password.  
The Parental Setup screen appears.  
Note  
The player is locked (  
).  
How to make the SETUP menu disappear or  
return to menu screen during set up;  
Press RETURN or LEFT button.  
CREATE PASSWORD  
PASSWORD CHECK  
If you have forgotten your password, see Forgot  
Password in the Troubleshooting Guide.  
Enter Password  
Enter Password  
-
-
-
-
-
-
-
-
0 ~ 9  
0 ~ 9  
ENG-34  
ENG-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 36  
Controlling a TV with the Remote  
Troubleshooting  
The remote control can be competible with various  
brands of TV by setting their control codes. The  
TOSHIBA code has initlally been set to control  
TOSHIBA TVs.  
Table of Brand Codes  
Before requesting service (troubleshooting), please check the following.  
Action  
Problem  
Page  
BRAND  
TOSHIBA  
CODE  
PROG + 01  
Check the batteries in the remote. They may need replacing.  
Operate the remote control within 30 angle on either side of the  
remote sensor, up to a distance of no more than 23 feet.  
Remove batteries and hold down one or more buttons for several  
minutes to drain the microprocessor inside the remote to reset it.  
Reinstall batteries and try to operate the remote again.  
No operations can be  
performed with remote.  
Setting Control Codes  
RCA/GE  
PROG + 02  
PROG + 03  
PROG + 04  
PROG + 05  
PROG + 06  
PROG + 07  
PROG + 08  
PROG + 09  
PROG + 10  
PROG + 11  
PROG + 12  
PROG + 13  
PROG + 14  
PROG + 15  
PROG + 16  
SONY  
P5  
P7  
1. Press TV to set the remote control operating your  
TV.  
MITSUBISHI  
JVC  
2. While holding down PROG button enter the two  
digits of your TVs brand code (listed right) using  
number buttons.  
Ensure that the disc is installed with the label side facing up.  
Check the region number of the DVD.  
Disc does not play.  
HITACHI  
PANASONIC A  
SHARP NEW  
SANYO  
5.1 channel sound is not  
being reproduced.  
5.1 channel sound is reproduced only when the following condi-  
tions are met. :  
3. Release PROG.  
1) The DVD player is connected with the proper amplifier  
2) The disc is recorded with 5.1 channel sound.  
Check whether the disc being played has the Dolby 5.1 chmark  
on the outside.  
Check if your audio system is connected and working properly.  
In a SETUP Menu, is the Audio Output set to Bitstream?  
4. Point the remote control at your TV and use each  
button listed below to make sure your TV is  
operated correctly.  
P12  
MAGNAVOX  
GOLDSTAR NEW  
SAMSUNG  
SHARP OLD  
ZENITH  
P31~32  
TV POWER  
CH  
To turn the TV on or off.  
To select TV channels in the  
upper or lower direction.  
The features or action cannot be completed at this time because:  
1. The DVDs software restricts it.  
The  
screen.  
icon appears on  
2. The DVDs software doesnt support the feature (e.g., angles).  
3. The feature is not available at the moment.  
4. Youve requested a title or chapter number or search time that  
is out of range.  
P14  
TV VOL.  
To adjust the sound level.  
PANASONIC B  
PIONEER  
I.SELECT  
To select an external source  
such as a VCR.  
Number buttons  
To select TV channels.  
When selecting channels 1 to  
9, first enter 0 and then the  
desired number.  
Disc Menu doesnt appear.  
Check if the disc has a Menu.  
Some of the functions selected in the Setup Menu may not work  
properly if the disc is not encoded with the corresponding function.  
Play mode differs from the  
Setup Menu selection.  
P29~35  
100  
To substitute for 100 channel  
key.  
The screen ratio cannot  
be changed.  
The Screen Ratio is fixed on your DVD discs.  
P33  
DISPLAY  
ENTER  
To turn on or off TVs screen  
display.  
No audio.  
Make sure you have selected the correct Digital Output in the  
Audio Options Menu.  
P31~32  
To use for the TVs ENTER  
key.  
Press power on from a cold start with no disc in the unit. Press the  
The screen is blocked  
STOP (  
) and PLAY (  
) buttons simultaneously on the front  
P14  
panel for three seconds. The SELECT MENU LANGUAGE display  
will appear. Select the number button of the desired language.  
Important Note  
Forgot password  
Press power on from a cold start with no disc in the unit. Press the  
Some TVs may not respond to all the operations  
above, or may not be operated at all with this  
remote control. In this case, operate your TV with  
its own remote control.  
STOP (  
) and PLAY (  
) buttons simultaneously on the front  
panel for three seconds. The SELECT MENU LANGUAGE display  
will appear. Select the number button of the desired language.  
Press the SETUP select Setup, then press RIGHT or ENTER.  
Press Up or Down to select Parental Setup. The Parental Setup is  
now unlocked as indicated on the display. You can change your  
password.  
P34~35  
For some brands, several control codes (brand  
codes) are allocated. Try each of them until the  
buttons work on your TV.  
If you replace the remote controls batteries, set  
the brand code again.  
Go to the contents and find the section of the instruction book that  
contains the explanations regarding the current problem, and follow  
the procedure once again.  
If you experience other  
problems.  
If the problem still cannot be solved, please contact your nearest  
authorized service center.  
ENG-36  
ENG-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 38  
Specifications  
Limited Warranty DVD Players  
Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original  
consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER  
PURCHASER OR ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROMTHE  
ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.  
Power Requirements  
Power Consumption  
Weight  
AC 120 V, 60 Hz  
13W  
9.5 lbs  
General  
Dimensions  
(W) 16.9 in x (D) 15.7 in x H 2.7 in  
+41°F to +95°F  
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE NOT COVERED BY THESE  
WARRANTIES.  
Operating Temperature Range  
Operating Humidity Range  
10 % to 75 %  
PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE NOT COVERED BY THESE  
WARRANTIES.  
Reading Speed : 11.45 ~ 15.09 ft/sec.  
Approx. Play Time  
(Single Sided, Single Layer Disc) : 135 min.  
DVD  
(DIGITAL VERSATILE DISC)  
Limited Ninety (90) Day Warranty on Labor*  
TACP warrant this DVD Player and its parts  
against defects in materials or workmanship for a peri-  
od of ninety (90) days after the date of original retail  
purchase. DURING THIS PERIOD, TACP WILL, AT  
TACPs OPTION, REPAIR OR REPLACE A DEFEC-  
TIVE PART WITH A NEW OR REFURBISHED PART  
WITHOUT CHARGE TO YOU FOR PARTS OR  
LABOR. YOU MUST DELIVER THE ENTIRE DVD  
PLAYERTO AN AUTHORIZED TACP  
Owners Manual and Demographic Card  
You should read this owners manual thoroughly  
before operating this DVD PLAYER. You  
should complete and mail the enclosed Demographic  
card within ten days after you, or the person who has  
given you this product as a gift, purchased this DVD  
PLAYER. This is one way to enable  
TACP to provide you with better customer service and  
improved products. Failure to return the Demographic  
card will not affect your rights under this warranty.  
CD : 5"  
(COMPACT DISC)  
Reading Speed : 15.75 ~ 18.37 ft/sec.  
Maximum Play Time : 74 min.  
Disc  
Reading Speed : 15.75 ~ 18.37 ft/sec.  
Maximum Play Time : 20 min.  
CD : 31/2"  
(COMPACT DISC)  
1 channel : 1.0 Vp-p (75 load)  
Composite Video  
Component Video  
Y : 1.0 Vp-p (75 load)  
Pr : 0.70 Vp-p (75 load)  
Pb : 0.70 Vp-p (75 load)  
Video  
SERVICE STATION. YOU MUST PAY FOR ALL  
TRANSPORTATION AND INSURANCE CHARGES  
FOR THE DVD PLAYER TO AND FROM  
Your Responsibility  
THE ABOVE WARRANTIES ARE SUBJECT TO THE  
Output  
Luminance Signal : 1.0 Vp-p (75 load)  
Chrominance Signal : 0.286 Vp-p (75 load)  
THE SERVICE STATION.  
FOLLOWING CONDITIONS:  
S-VIDEO  
(1) You must provide your bill of sale or other proof of  
purchase.  
Limited One (1) Year Warranty on Parts*  
L(1/L), R(2/R)  
2 Channel  
TACP further warrant the parts in this DVD Player  
against defects in materials or workmanship  
for a period of one (1) year after the date of original  
retail purchase. DURING THIS PERIOD, TACP WILL,  
AT TACP S OPTION, REPAIR OR REPLACE A  
DEFECTIVE PART WITH A NEW OR REFURBISHED  
PART WITHOUT CHARGE TO YOU FOR THE PART,  
PROVIDED THAT IF A DEFECTIVE PART IS  
REPAIRED OR REPLACED AFTER NINETY (90)  
DAYS FROM THE DATE OF ORIGINAL RETAIL  
PURCHASE, THE CONSUMER PAYS ALL LABOR  
CHARGES INVOLVED IN THE REPAIR OR  
REPLACEMENT. YOU MUST DELIVER THE ENTIRE  
DVD PLAYER TO AN AUTHORIZED  
(2) All in-warranty servicing of this DVD PLAYER  
must be made by a specified  
F/L, F/R, R/L, R/R, C/T, S/W  
5.1 Channel  
48 kHz Sampling : 4 Hz to 22 kHz  
96 kHz Sampling : 4 Hz to 44 kHz  
Audio  
Authorized TACP Service Station.  
*Frequency Response  
Output  
(3) The warranties from TACP are effective only if the  
DVD PLAYER is purchased and  
110 dB  
100 dB  
0.004 %  
*S/N Ratio  
*Dynamic Range  
operated in the U.S.A. or Puerto Rico.  
*Total Harmonic Distortion  
(4) Labor service charges for set installation, set up,  
adjustment of customer controls and installation  
or repair of hook up related items and/or antenna  
systems are not covered by these warranties.  
Reception problems caused by inadequate  
antenna systems are your responsibility.  
*: Nominal specification  
Toshiba Electronics Co., Ltd reserves the right to change the specifications without notice.  
TACP SERVICE STATION. YOU MUST PAY FOR ALL  
TRANSPORTATION AND INSURANCE CHARGES  
FOR THE DVD PLAYER TO AND FROM  
Weight and dimensions are approximate.  
(5) Warranties extend only to defects in materials or  
workmanship as limited above and do not extend  
to any DVD PLAYER or parts which  
THE SERVICE STATION.  
*Rental Units  
have been lost or discarded by you or to damage  
to DVD PLAYER or parts caused by  
The warranty for rental units begins with the first  
rental or thirty (30) days from the date of shipment  
to the rental firm, whichever comes first.  
misuse, accident, Acts of God, such as lightning  
or fluctuations in electric power, improper installa-  
tion, improper maintenance or use in violation of  
instructions furnished by TACP; or to units which  
have been modified or had the serial number  
removed, altered, defaced or rendered illegible.  
*Commercial Units  
DVD PLAYER(s) sold and used for  
commercial purposes have a limited ninety (90) day  
warranty.  
ENG-38  
ENG-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 40  
How to Obtain Warranty Services  
HOW STATE LAW RELATES TO WARRANTY  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS WHICH MAY VARY FROM STATE TO STATE  
IN THE U.S.A. SOME STATES OF THE U.S.A. DO  
NOT ALLOW LIMITATIONS ON HOW LONG AN  
IMPLIED WARRANTY LASTS, WHEN AN ACTION  
MAY BE BROUGHT, OR THE EXCLUSION OR LIMI-  
TATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATIONS OR  
EXCLUSIONS MAY NOT APPLY TO YOU UNDER  
SUCH CIRCUMSTANCES.  
If, after following all of the operating instructions in this  
manual and checking the section "Troubleshooting",  
you find that service is needed:  
(1) For instructions on how to obtain warranty service  
for your DVD Player, contact TACP Call  
Centers toll free number at 1-866-583-7353.  
(2) You must include a copy or original bill of sale or  
other proof of purchase along with the entire DVD  
PLAYER to the Authorized TACP  
Service Station specified by the Call Center. You  
must pay for all transportation and insurance  
charges for the DVD PLAYER to the  
Service Station.  
For additional information, visit TACPs web site:  
Time for Taking Action  
ALL WARRANTIES IMPLIED BY THE LAW OF ANY  
STATE OF THE U.S.A., INCLUDING THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FIT-  
NESS FOR A PARTICULAR PURPOSE, ARE  
EXPRESSLY LIMITED TO THE DURATION OF THE  
LIMITED WARRANTIES SET FORTH ABOVE. WITH  
THE EXCEPTION OF ANY WARRANTIES IMPLIED  
BY THE LAW OF ANY STATE OF THE U.S.A. AS  
HEREBY LIMITED, THE FOREGOING WARRANTY  
IS EXCLUSIVE AND IN LIEU OF ALL OTHER  
WARRANTIES, GUARANTEES, AGREEMENTS AND  
SIMILAR OBLIGATIONS OF TACP WITH RESPECT  
TO THE REPAIR OR REPLACEMENT OF ANY  
PARTS. IN NO EVENT SHALL TACP OR BE  
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL  
DAMAGES.  
No person, agent, distributor, dealer or company is  
authorized to change, modify or extend the terms of  
these warranties in any manner whatsoever. The time  
within which action must be commenced to enforce  
any obligation of TACP arising under this warranty or  
under any law of the United States or of any state  
thereof is hereby limited to 90 days from the date you  
discovered or should have discovered, the defect. This  
limitation does not apply to implied warranties arising  
under the law of any state of the U.S.A.  
ENG-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Thule Automobile Accessories 665C User Manual
Toshiba Blu ray Player BDX2000KC User Manual
Toshiba Fax Machine GD 1260 User Manual
Toshiba Marine Radio Release 40 User Manual
Tripp Lite Network Cables N201 001 RD User Manual
Uniden Cordless Telephone DECT2185 User Manual
Victory Refrigeration Refrigerator VUR 66 330BT User Manual
Viking Range F20636D User Manual
Visual Land MP3 Player 507K User Manual
Vizio Flat Panel Television D40U D1 User Manual