VIZIO
USER MANUAL
Models D40u-D1, D50u-D1, & D55u-D1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Do not apply pressure or throw objects at your TV. This may
compromise the integrity of the display. The manufacturer’s
warranty does not cover user abuse or improper
installations.
The power cord must be replaced when using different
voltage than the voltage specified. For more information,
contact your dealer.
When connected to a power outlet, power is always flowing
into your TV. To totally disconnect power, unplug the power
cord.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of un-isolated, dangerous voltage within the
inside of your TV that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
Do not overload power strips and extension cords.
Overloading can result in fire or electric shock.
The wall socket should be installed near your TV and easily
accessible.
Only power of the marked voltage can be used for your TV.
Any other voltage than the specified voltage may cause fire
or electric shock.
Do not touch the power cord during lightning. To avoid
electric shock, avoid handling the power cord during
electrical storms.
Unplug your TV during a lightning storm or when it will not
be used for long period of time. This will protect your TV
from damage due to power surges.
Do not attempt to repair or service your TV yourself.
Opening or removing the back cover may expose you to
high voltages, electric shock, and other hazards. If repair
is required, contact your dealer and refer all servicing to
qualified service personnel.
WARNING: Keep your TV away from moisture. Do not expose
your TV to rain or moisture. If water penetrates into your TV,
unplug the power cord and contact your dealer. Continuous
use in this case may result in fire or electric shock.
•
•
Do not use your TV if any abnormality occurs. If any smoke
or odor becomes apparent, unplug the power cord and
contact your dealer immediately. Do not try to repair your
TV yourself.
Avoid using dropped or damaged appliances. If your TV
is dropped and the housing is damaged, the internal
components may function abnormally. Unplug the power
cord immediately and contact your dealer for repair.
Continued use of your TV may cause fire or electric shock.
Do not install your TV in an area with heavy dust or high
humidity. Operating your TV in environments with heavy
dust or high humidity may cause fire or electric shock.
Follow instructions for moving your TV. Ensure that the
power cord and any other cables are unplugged before
moving your TV.
When unplugging your TV, hold the AC/DC power adapter,
not the cord. Pulling on the power cord may damage the
wires inside the cord and cause fire or electric shock. When
your TV will not be used for an extended period of time,
unplug the power cord.
To reduce risk of electric shock, do not touch the connector
with wet hands.
Insert batteries in accordance with instructions. Incorrect
polarities may cause the batteries to leak which can
damage the remote control or injure the operator. Do not
expose batteries to excessive heat such as sunshine, fire or
the like.
If any of the following occurs, contact the dealer:
- The power cord fails or frays.
•
•
The mains plug or appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
CAUTION - These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are
qualified to do so.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated DANGEROUS VOLTAGE within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to persons.
•
•
•
•
•
•
•
h
•
•
•
•
•
•
•
•
•
•
- Liquid sprays or any object drops into your TV.
- Your TV is exposed to rain or other moisture.
- Your TV is dropped or damaged in any way.
- The performance of your TV changes substantially.
This apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
•
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEVISION ANTENNA CONNECTION
PROTECTION
If an outside antenna/satellite dish or cable system is to be
connected to the TV, make sure that the antenna or cable system
is electrically grounded to provide some protection against voltage
surges and static charges.
Ground Clamp
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of the grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements of the grounding electrode.
Antenna Lead In Wire
Lightning Protection
Antenna Discharge Unit
(NEC Section 810-20)
For added protection of the TV during a lightning storm or when it
is left unattended or unused for long periods of time, unplug the TV
from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or
where it could fall into such power lines or circuits. Remember, the
screen of the coaxial cable is intended to be connected to earth in
the building installation.
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System
Electric Service Equipment
(NEC ART 250, part H)
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS Studio Sound is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
This product qualifies for ENERGY STAR in the “factory
default” settings and this is the setting in which power
savings will be achieved. Changing the factory deafult
picture settings or enabling other features will increase
power consumption that could exceed the limits necessary
to qualify for ENERGY STAR rating. For more information
on the ENERGY STAR program, refer to energystar.gov.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel..........................................................................................10
vi
Getting to Know Your TV
1
INSPECTING THE PACKAGE CONTENTS
Before installing your new TV, take a moment to inspect the package
contents. Use the images below to ensure nothing is missing or
damaged.
VIZIO LED UHDTV
Power Cord
Remote Control
with Batteries
4 x Phillips Screws
TV Stands
2 x Quick Start Guides
(1 English, 1 French-Spanish)
PACKAGE CONTENTS
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1
To install the stands:
INSTALLING THE TV
After removing the TV from the box and inspecting the package
contents you can begin installing the TV. Your TV can be installed in
two ways:
•
•
On a flat surface, using the included stand
On a wall, using a VESA-standard wall mount (not included)
Installing the TV Stand
Your TV includes a stand designed to support the weight of the TV
and keep it from falling over. However, the TV can still fall over if:
•
•
•
It is placed on an uneven, unstable, or non-level surface
It is pushed, pulled, or otherwise improperly moved
If an earthquake occurs and the TV is not properly secured
It is recommended that two people take part in the
base installation.
Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft surface,
such as carpet, rug, or blanket.
1. Insert the stands into the base of the TV.
2. Secure each stand to the TV with two (2) Phillips screws (included).
Insert the screws into the back of the TV and tighten them using a
Phillips screwdriver.
3. When you are finished, place the TV on a stable, level surface.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult the
information below to find the appropriate mount for your TV model:
Installing a TV on a wall requires lifting. To prevent
injury or damage to the TV, ask someone to help you.
D40u-D1
D50u-D1
D55u-D1
Screw Size:
M6
M6
M6
200mm (V) x
200mm (H)
200mm (V) x
200mm (H)
300mm(V) x
300mm(H)
Hole Pattern:
Weight w/o
Stand:
17.19 lbs
(7.8 kg)
30.3 lbs
(13.62 kg)
36.6 lbs
(16.6 kg)
Be sure the mount you choose is capable of supporting the weight of
the TV. After you have determined that you have the correct mount
for your TV, you can begin the installation.
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface. Be sure
Note: The image shown here is for illustrative purposes only and may be subject to change.
the surface is clear of debris that can scratch or damage the TV.
The actual number of ports and their locations may vary, depending on the model.
3. Remove the stands by loosening and removing
the screws.
WALL-MOUNT SCREW LOCATIONS
4. Attach your TV and wall mount to the wall, carefully following the
instructions that came with your mount. Use only with a UL-listed
wall mount bracket rated for the weight/load of this TV.
For some wall mounts, you may want to use cables
with right-angle connectors. This allows the TV to rest
closer to the wall.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1
REMOTE SENSOR & POWER INDICATOR
When using the remote, aim it directly at this sensor.
The power indicator flashes on when the TV turns on, then goes out after several seconds.
To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off on page 46.
FRONT PANEL
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1
USB - Connect a USB thumb drive to play photo, music, or video.
HDMI - Connect an HDMI device.
Component/Composite - Connect a component or composite device.
HDMI - Connect an HDMI device.
Optical Audio Out - Connect an optical/SPDIF audio device, such as home audio receiver.
Stereo Audio Out - Connect an RCA audio device, such as sound bar.
Coaxial - Connect a coaxial cable from cable, satellite, or antenna.
Ethernet - Connect an Ethernet cable from home network.
Power - Press to turn on the TV. Press and hold to turn the TV off.
Note: The image shown here is for illustrative purposes only and may be subject to change.
Input - Press once to access the input menu.
The actual number of ports and their locations may vary, depending on the model.
REAR PANEL
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Replacing the Batteries
APP LAUNCHER
Quickly launch the pictured App.
INPUT
Change the currently
displayed input.
POWER
Turn TV on or off.
A/V CONTROLS
Control the USB media player and
streaming video playback.
MENU
Display the on-screen menu.
CLOSED CAPTIONS
INFO
Turn closed captions on and off.
Display the info window.
EXIT
ARROW
Close the on-screen menu.
Navigate the on-screen menu.
OK
Select the highlighted option.
GUIDE
Display the info window.
BACK
Go to the previous on-screen menu.
CHANNEL UP/DOWN
Change the channel.
VOLUME UP/DOWN
Increase or decrease loudness
of the audio.
V BUTTON
Open the VIZIO Internet Apps
Plus® (V.I.A. Plus) dock.
MUTE
Turn the audio off or on.
LAST
Return to the channel last viewed.
WIDE
Change the display mode.
PIC
Opens the Picture Mode menu.
NUMBER PAD
Manually enter a channel.
DASH
Use with number pad to manually
enter a digital sub-channel.
(For example, 18-4 or 18-5.)
1. Remove the battery cover by pressing down on the arrow
markings and sliding out.
ENTER
Confirm channel or passcode
entered using the Number Pad.
2. Insert two batteries into the remote control. Make sure that
the (+) and (-) symbols on the batteries match the (+) and (-)
symbols inside the battery compartment.
3. Replace the battery cover.
REMOTE CONTROL
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Devices
2
CONNECTING A DEVICE
Your TV can be used to display output from most devices.
1. Verify that your device has a video port that matches an
available port on the TV (HDMI, Component, etc.).
2. Turn the TV and your device off.
3. Connect the appropriate cable (not included) to the TV and the
device.
4. Turn the TV and your device on. Set the TV’s input to match the
connection you used (HDMI-1, HDMI-2, etc.).
AGVOCABOLED
• ANALOG
• SD VIDEO (480i)1
• STEREO AUDIO
COMPONENT CABLE
• ANALOG
• HD VIDEO (1080p)1
• STEREO AUDIO
BETTER
COAXIAL CABLE
• ANALOG/DIGITAL
• HD VIDEO (1080i)1
• STEREO/HD AUDIO
BETTER
HDMI (HDMI 1-4)2
• DIGITAL
• ULTRA HD VIDEO (4K @ 30 Hz)1
• HD AUDIO
BEST
• DIGITAL
HDMI CABLE
• ULTRA HD VIDEO (4K @ 60 Hz)1
• HD AUDIO
(BHDEMIS5)*T
1
2
• HIGH VELOCITY MODE†
Maximum Resolution
HDCP 2.2 supported on HDMI ports 1,2, and 5
* Recommended for use with high-performance devices only
†
Available for compatible gaming systems or high-performance PCs for display of 1080p @ 60 fps
Connect to HDMI 5
Note: The image shown here is for illustrative purposes only and may be subject to change.
13
The actual number of ports and their locations may vary, depending on the model.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
CONNECTING A DEVICE - AUDIO & VIDEO CABLE TYPES
AV CABLE
COAXIAL CABLE
COMPONENT CABLE
HDMI CABLE
Component cables are designed to carry high
definition video signals along with additional
audio connections. Colors are delivered with color
information split up three different ways over
three connectors for video (separated into Red,
Blue and Green signals) and the left and right
audio connectors (Red and White).
HDMI is the intelligent, all-digital interface that
delivers both dazzling quality and unmatched ease
of use. HDMI technology transmits crystal-clear
digital video along with multi-channel surround
audio. HDMI-connected devices have the ability
to automatically adjust themselves for optimal
viewing.
AV cables (or Composite cables) are the
traditional way of connecting your devices to
your TV. Video signals are sent over the yellow
connector while audio is sent over the red and
white connectors.
Coaxial cables are the traditional way of
connecting antennas and cable television
signals to your TV. Coaxial cables carry both
audio and video signals through a single
connector.
•
•
•
HD Video Resolutions up to 1080i
Analog Connection
Audio and Video Signals
•
•
•
HD Video Resolutions up to 1080p
Analog Connection
Audio and Video Signals
•
•
•
•
HD Video Resolutions up to UHD*
HD Audio
Digital Connection
• Video Resolutions up to 480i
• Analog Connection
• Audio and Video Signals
Audio and Video Signals
HDMI
Coaxial
Y/V
L
R
R
L
Pr/Cr
Pb/Cb
Y
BETTER
BETTER
GOOD
BEST
* High-Speed HDMI cable required for UHD resolutions
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2
CONNECTING AN AUDIO DEVICE
Your TV can output sound to an audio device, such as a receiver or
sound bar.
1. Verify that your device has an audio port that matches an
available port on the TV (Optical, RCA, or HDMI).
2. Turn the TV and your audio device off.
3. Connect the appropriate cable (not included) to the TV and the
device.
Home Audio Receiver
VIZIO Sound Bar
4. Turn the TV and your device on.
RCA CABLE
• ANALOG STEREO CONNECTION
• 2.0 CHANNEL
GOOD
OBPETICTATL/SEPDRIF CABLE
• PCM STREAM
• DOLBY DIGITAL 5.1 CHANNEL
• DTS 5.1 CHANNEL
• ARC 2-WAY COMMUNICATION
• 2.0-5.1 DIGITAL AUDIO
• PCM, DTS, DOLBY DIGITAL
HDMI CABLE
BEST
Note: The image shown here is for illustrative purposes only and may be subject to change.
15
The actual number of ports and their locations may vary, depending on the model.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES
RCA CABLE
OPTICAL/SPDIF CABLE
HDMI CABLE
RCA cables (or Composite cables) are the
traditional way of connecting your devices to your
audio device. Audio signals are sent over the red
and white connectors.
Optical/SPDIF cables transmit audio signals as
pulses of light through a cable made of plastic
fibers. Audio signals are digitally transmitted
between devices.
HDMI technology transmits crystal-clear digital
multi-channel surround audio through a single
HDMI cable. Audio Return Channel-enabled
(ARC) TVs allow audio to be sent over an already
connected HDMI cable, eliminating the need for
a separate audio cable. See Connecting an Audio
•
•
•
•
Quality Stereo Connection
2.0 Channel
Analog Connection
Audio Signal Only
•
•
•
•
•
PCM Stream (Lossless)
Dolby Digital 5.1 Channel
DTS 5.1 Channel
Digital Connection
Audio Signal Only
•
ARC 2-way Communication
(Auto setup)
PCM, DTS, Dolby Digital
2.0 - 5.1 Scaleable Lossless
Digital Audio Connection
Audio and Video Signals
•
•
•
L
R
Optical/SPDIF
HDMI
GOOD
BETTER
BEST
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2
CONNECTING AN AUDIO DEVICE - ARC
Without HDMI ARC
With HDMI ARC
With an HDMI ARC setup, the audio connection between your
TV and Home Audio Receiver can be removed. The HDMI cable
will transmit audio signal to and from your TV with an all-digital
audio/video connection.
Without an HDMI ARC setup, your TV will transmit audio signal
from the built-in tuner and VIA apps to your home audio receiver
through a separate audio connection.
Built-In Tuner
Built-In Tuner
VIZIO Internet Apps Plus®
VIZIO Internet Apps Plus®
Your TV
Your TV
RCA (Audio)
HDMI Cable
HDMI Cable
Your Home Audio Receiver
Your Home Audio Receiver
HDMI Cable
HDMI Cable
Your Blu-Ray Player
Your Blu-Ray Player
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2
CONNECTING TO YOUR NETWORK
Your TV is Internet-ready. It can be connected to your home network
with a Wired or Wireless connection.
Connecting to a Wireless Network
1. Ensure you have a router or modem broadcasting as
high-speed wireless signal (802.11n recommended).
Connecting to a Wired Network (Best)
1. Connect an Ethernet cable to your router and to the Ethernet
port on the back of the TV. See below.
Ethernet Cable
Router / Modem
Note: The image shown here is for illustrative purposes only and may be subject to change.
18
The actual number of ports and their locations may vary, depending on the model.
Download from Www.Somanuals.com. All Manuals Search And Download.
Completing The First-Time Setup
3
The first time you turn on the TV, the Setup App will guide
you through each of the steps necessary to get your TV
ready for use.
To complete the first-time setup:
1
3
4
Before you begin the first-time setup:
•
Your TV should be installed and the power cord
should be connected to an electrical outlet.
•
•
Your devices should be connected.
If you have a wireless network, have the network
password ready.
•
If you are connecting to your network with an
Ethernet cable, connect it to the Ethernet port on
the TV.
Press the Power button on the remote. The TV
Use the Arrow buttons on the remote to highlight
your language of preference and press OK.
powers on and the Setup App starts.
Choose your mode.
Select Store Demo for in-store display.
Select Home Use for in-home use.
2
Seleccione "Home Use" para Modo de Casa o "Store Demo" para Demostración en la Tienda.
Choisissez "Home Use" pour le Mode Domicile ou "Store Demo" pour la Démo en Magasin.
Store Demo
Home Use
Use the Arrow buttons on the remote to
Use the Arrow buttons on the remote to
highlight your country, and then press OK.
highlight Home Use and press OK.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3
5
6
7
8
Select your time zone and press OK.
Select the name of your wireless network from the
Use the Arrow and OK buttons on the remote to
review the Terms Of Service and Privacy Policy.
list of available networks and press OK.
When you are finished, highlight I Accept
and press OK.
Enter the network password using the on-screen
keyboard, then highlight Connect and press OK.
Enter your E-mail Address, First Name, Last
Name, and Zip Code using the on-screen
keyboard.
Highlight Next and press OK.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3
10
9
If the TV Signal channel scan screen appears, the
TV will need to scan for channels, which takes
several minutes.
Use the Arrow buttons on the remote to highlight
your TV source and press OK.
Use the arrow buttons on the remote to highlight
Begin Scan and press OK.
Note: Number of ports may differ by TV.
Otherwise, use the Arrow and OK buttons on
the remote to select the input your TV source
is connected to.
If you have cable TV, select whether you have
a cable box or if you connect the TV directly
to a cable from the wall.
When you are finished, the message
“Setup is complete.” will appear.
The First-Time Setup is complete.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-Screen Menu
4
Your TV features an easy-to-use on-screen menu.
NAVIGATING THE ON-SCREEN MENU
CHANGING THE INPUT SOURCE
To open the on-screen menu, press the MENU button on the remote.
You can also open the on-screen menu by pressing the VIA button
and selecting HDTV Settings from the VIA Dock, then pressing OK.
To open the on-screen menu, press
External devices such as DVD players, Blu-ray Players, and video
game consoles can be connected to your TV. To use one of these
devices with your TV, you must first change the input source using
the Input menu.
the MENU button on the remote.
Use the Arrow buttons to highlight
a menu option, and press the OK
button to select that option.
From this menu, you can:
•
•
•
•
•
•
•
•
•
•
Adjust the Picture settings
Adjust the Audio settings
Setting the Sleep Timers
Adjust the Network settings
Adjust the Channel settings
Set up Closed Captioning
Name Inputs
Adjust TV settings
Access the Guided Setup
View the User Manual
To change the input source:
VIZIO
TV SETTINGS
1. Press the INPUT button on
the remote. The Input menu is
displayed.
Picture
TV
Audio
Timers
2. Use
the
Up/Down
Arrow
COMP
Network
buttons or the INPUT button on
the remote to highlight the input
you wish to view and press OK.
The selected input is displayed.
Channels
Closed Captions
Devices
CC
HDMI-1
HDMI-2
System
Guided Setup
User Manual
Input Name
HDMI-3
HDMI-4
While navigating the on-screen menu, you can
press the BACK button at any time to return to the
previous menu screen. The EXIT button will close the
on-screen menu.
HDMI-5
Note: Inputs may vary by TV.
You can change the input names that appear on the
Input menu to make your devices easy to recognize. See
more information.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
4
not stretched, but the sides of the image are extremely
stretched. If you are watching widescreen (1.85:1 or 2.35:1)
content with black bars on the top and bottom, the black
bars will still appear on the top and bottom of the display
image.
CHANGING THE SCREEN ASPECT RATIO
The TV can display images in five different modes: Normal, Stretch,
Panoramic, Wide, and Zoom. Each mode displays the picture
differently.
•
Standard Definition (480i and 480p) - Fills the screen
Some programs have black bars on the top or sides of the picture
so that the picture keeps its original shape. Examples include
wide-screen movies and older television programs.
from the left to right edges.
•
•
720p and - Not available.
1080p and 1080i - Not available.
To change the screen aspect ratio:
•
•
Wide stretches a 4:3 aspect ratio picture to the edges of
the screen. Since the picture is being stretched, the display
image may appear distorted—figures appear short and fat.
If the program is already formatted for widescreen viewing
(1.85:1 or 2.35:1), then black bars will appear on the top
and bottom of the display image.
Zoom expands images evenly in all directions (33% taller
and 33% wider) with black bars to fit the screen. A 720p
image will fill a 1080p screen.
1. Press the WIDE button on the
remote.
2. Use the Arrow buttons to
highlight the aspect ratio you
Normal
Normal
Stretch
wish to view and press OK.
Panoramic
•
Normal preserves the content’s
original aspect ratio and size.
Wide
Wide
•
Standard Definition (480i and
480p—old TV programs) - Since
the 4:3 aspect ratio is not large
enough to fill the TV’s screen,
black bars are added to the left
and right of the display image.
•
•
•
Standard Definition - Not available.
720p and - Fills a 1080p screen
1080p and 1080i - Not available.
Zoom
Zoom
Note: Aspect ratio settings may
vary by Input source.
•
•
720p - Fills a 720p or 1080p screen.
1080p and 1080i HD - Fills a 720p or 1080p screen.
Tip: The aspect ratio cannot be changed for Ultra HD
content or for any video content on HDMI-5.
•
Stretch expands a widescreen image to fill the screen from
top to bottom and stretches it half as much from right to
left. Figures appear tall and thin.
•
•
Standard Definition - Not available.
720p - If you are watching widescreen 1.85:1 content, the
image will fill the screen. With 2.35:1 widescreen content,
one-sixth of the image is cut off by the left and right
sides of the screen.
•
1080p and 1080i - Not available.
•
Panoramic stretches a 4:3 aspect ratio picture to the left
and right edges of the screen. The center of the image is
23
Download from Www.Somanuals.com. All Manuals Search And Download.
4
VIEWING VIDEO WITH THE MENU OPEN
VIZIO
PICTURE
Picture Mode
Auto Brightness Control
Standard
Off
When the on-screen menu opens, it covers the left-hand portion of
+
Backlight
-
-
-
-
-
-
85
the picture. The picture can be displayed in three different ways:
+
Brightness
Contrast
50
+
50
+
•
Viewport - The entire picture is resized to fit into the space
to the right of the menu
Color
59
+
0
Tint
+
9
Sharpness
More Picture
Picture Mode Edit
Color Calibration
•
Overlay - The picture stays in its normal postion and the
menu covers the left-hand portion of the picture. (The picture
is full-sized)
•
Centered Overlay - The picture is full-sized and centered in
the area next to the menu, so that the right and left edges
are cut off.
VIEWPORT
To change the position of the picture while the on-screen menu is
displayed:
VIZIO
PICTURE
Picture Mode
Standard
Off
Auto Brightness Control
+
Backlight
-
-
-
-
-
-
85
+
VIZIO
Brightness
Contrast
50
1. Use the Arrow buttons on the
+
50
+
Color
59
PICTURE
remote to highlight
Video.
Resize
+
0
Tint
+
9
Sharpness
More Picture
Picture Mode Edit
Color Calibration
Picture Mode
Standard
Medium
Auto Brightness Control
2. Press OK to cycle through the
+
+
+
+
+
+
Backlight
85
50
50
59
0
-
three display methods.
Brightness
-
Contrast
-
3. Press the Up Arrow button on
Color
-
the remote to the menu.
OVERLAY
Tint
-
Sharpness
9
-
More Picture
VIZIO
PICTURE
Picture Mode EDIT
Color Calibration
Picture Mode
Standard
Off
Auto Brightness Control
+
Backlight
-
-
-
-
-
-
85
+
Brightness
Contrast
50
+
50
+
Color
59
+
0
Tint
+
9
Sharpness
More Picture
Picture Mode Edit
Color Calibration
CENTERED OVERLAY
24
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3. Use the Arrow buttons on the
remote to highlight Picture
Mode, then use the Left/Right
Arrow buttons to change the
picture mode:
4. To manually change each of the picture settings, use the Up/
ADJUSTING THE PICTURE SETTINGS
VIZIO
Down Arrow buttons on the remote to highlight that picture
setting, then use the Left/Right Arrow buttons to adjust the
setting:
PICTURE
Your TV display can be adjusted to suit your preferences and viewing
conditions.
Picture Mode
Auto Brightness Control
Standard
Medium
•
Auto Brightness Control - The auto brightness control detects
the light levels in the room and automatically adjusts the
backlight for the best picture. Select Off, Low, Medium, or
High.
+
+
+
+
+
+
Backlight
85
50
50
59
0
-
•
Standard mode sets the
picture settings to the
default settings.
If you’ve changes to the settings for a picture mode, an
asterisks appears after its name (see Saving a Custom
Brightness
-
Contrast
-
Color
-
•
Calibrated mode sets the
picture settings to values
ideal for watching TV in a
brightly-lit room.
•
•
Backlight - Adjusts the LED brightness to affect the overall
brilliance of the picture. Backlight cannot be adjusted when
starting from some picture modes.
Brightness - Adjusts the black level of the picture. When this
setting is too low, the picture may be too dark to distinguish
details. When this setting is too high, the picture may appear
faded or washed out.
Tint
-
Sharpness
9
-
To adjust the picture settings:
More Picture
Picture Mode Edit
Color Calibration
1. Press the MENU button on the remote. The on-screen menu is
•
•
•
Calibrated Dark mode sets
the picture settings to values
ideal for watching TV in a
dark room.
Vivid mode sets the picture
settings to values that
produce a brighter, more
vivid picture.
Game mode reduces
throughput delays and
optimizes the picture settings
for displaying game console
output.
displayed.
2. Use the Arrow buttons on the remote to highlight Picture and
press OK. The PICTURE menu is displayed.
•
Contrast - Adjusts the white level of the picture. When this
setting is too low, the picture may appear dark. When this
setting is too high, the picture may appear faded or washed
out. If the setting is too high or too low, detail may be difficult
to distinguish in dark or bright areas of the picture.
•
•
Color - Adjusts the intensity of the picture colors.
Tint - Adjusts the hue of the picture. This setting is useful in
adjusting the flesh tones in the picture. If flesh appears too
orange, reduce the level of color before adjusting tint.
•
Sharpness - Adjusts the edge sharpness of picture elements.
It can be used to sharpen non-HD (high definition) content;
however, it will not produce detail that does not otherwise
exist.
•
Computer mode optimizes the picture settings for
displaying computer output.
5. When you have finished adjusting the picture settings, press
the EXIT button on the remote.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Adjusting the Color Temperature
Adjusting the color temperature changes the white balance of the
picture.
Adjusting More Picture Settings
To adjust more picture settings:
•
•
Clear Action - Reduces blur in scenes with fast action. Some
sensitive viewers may notice flicker. Select On or Off.
Reduce Noise — Opens a sub-menu wiht two settings:
1. From the PICTURE menu, use the
Arrow buttons to highlight More
Picture, and then press OK.
•
•
Reduce Signal Noise* - Diminishes artifacts in the image
caused by the digitizing of image motion content. Select
Off, Low, Medium, or High.
Reduce Block Noise - Reduces pixelation and distortion
for mpeg files. Select Off, Low, Medium, or High.
To adjust the color temperature:
VIZIO
MORE PICTURE
VIZIO
COLOR TEMPERATURE
1. From the MORE PICTURE menu,
Color Temperature
Black Detail
Cool
Normal
use the Arrow buttons to
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the Left/
Right Arrow buttons to change
the setting:
Medium
Cool
highlight Color Temperature,
Active LED Zones
Reduce Judder
Reduce Motion Blur
Clear Action
On
+
Computer
and then press OK.
-
-
•
•
Game Low Latency - Select On to reduce video delay (lag)
when gaming.
Picture Size & Position - Highlight Picture Size & Position
and press OK. The PICTURE SIZE & POSITION menu is
displayed.
+
2. Use the Arrow buttons on the
remote to highlight a color
temperature preset and then
press OK.
On
•
Color Temperature -
Reduce Noise
Game Low Latency
Picture Size & Position
Film Mode
Off
•
•
•
Normal is optimized for
•
•
Picture Size: Increase or decrease the vertical and
horizontal size of the displayed picture. Use the Left/
Right Arrow buttons to adjust the horizontal size of the
displayed picture. Use the Up/Down Arrow buttons to
adjust the vertical size of the displayed picture. Press the
OK button when you are finished.
Picture Position: Adjust the vertical and horizontal
positions of the picture to ensure the image is centered
and completely fills the screen. Use the Left/Right
Arrow buttons to adjust the horizontal position of the
displayed picture. Use the Up/Down Arrow buttons to
adjust the vertical position of the displayed picture. Press
the OK button when you are finished.
Auto
Auto
2.1
television viewing.
Color Space
•
Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select Off, Low, Medium, or
High.
Cool produces a blue-hued
picture.
Computer optimizes the
picture for use as a
PC monitor.
Gamma
•
Active LED Zones -
3. When you have finished
adusting the color temperature,
press the EXIT button on the
remote.
Dynamically improves the
contrast ratio of the picture
by adjusting the backlight.
The adjustment is controlled
by the content on the screen.
Select On or Off.
•
•
•
Film Mode - Optimizes the picture for watching film. Select
Auto or Off.
Color Space‡ - Select Color Space for the source. Video
sources uses YCbCr, but PC uses RGB.
Gamma - Set the shape of the Gamma curve. Use lower
Gamma values for bright room conditions, and higher
values when it’s dark.
•
•
Reduce Judder - Activates Smooth Motion motion
estimation/motion compensation, which suppresses motion
judder, or “stuttering” of the image when the camera moves
across a scene horizontally. As the setting increases, judder
is reduced.
Reduce Motion Blur - Increases frame rate to reduce
motion blur of 60 hertz video. As the setting increases,
motion blur is reduced.
3. When you have finished adjusting More Picture Settings, press the
EXIT button on the remote.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Adjusting the Picture Mode Edit Settings
Saving a Custom Picture Mode
Locking/Unlocking a Custom Picture Mode
Picture Mode Edit Settings allow you to make precise adjustments
to the picture and to create picture modes to save groups of picture
settings.
Custom picture modes allow you to save a group of custom settings
for various viewing conditions and video sources.
Custom picture modes can be locked/unlocked with a unique PIN to
prevent accidental changes to their settings.
•
Changes made while on any preset picture mode will add an
asterisk on the top right corner of the preset mode.
To lock all custom picture modes:
To adjust the Picture Mode Edit settings:
1. From the PICTURE MODE EDIT
•
The custom picture mode is not automatically saved.
VIZIO
1. From the PICTURE menu, use the
menu, use the Arrow buttons
VIZIO
LOCK PICTURE MODE
Arrow buttons to highlight Picture
To save a custom picture mode:
to highlight Lock Picture
PICTURE MODE EDIT - Vivid*
Mode Edit, and then press OK.
Mode, and then press OK. The
Create a picture control PIN to prevent
changes to all custom picture modes.
Save Picture Mode
1. From the PICTURE MODE EDIT
menu, use the Arrow buttons
to highlight Save Picture
Mode, and then press OK. The
SAVE PICTURE MODE menu is
displayed.
The PICTURE MODE EDIT menu is
LOCK PICTURE MODE menu is
VIZIO
Lock Picture Mode
displayed.
displayed.
SAVE PICTURE MODE
Reset Picture Mode - Vivid*
2. Use the Arrow buttons to
2. Use the Number Pad on your
Custom1_
highlight the setting you wish to
adjust, then press OK to change
the setting:
remote to enter a unique 4-digit
PIN.
Save
a
j
b c d e
f
g h i
k
t
l
m n o p q r
2. Use either the on-screen
keyboard or keyboard on your
remote control to enter a name
for your custom picture mode.
3. Highlight Save and press OK.
•
Save Picture Mode - Save a
custom picture mode.
s
u v w x
y
7
z
8
0
9
4. Press the EXIT button to exit the
1
2
3
4
5
6
menu screens.
Create a 4 digit passcode using the num-
ber keys on the remote.
•
Lock Picture Mode - Prevent
changes to custom picture
modes.
Unlock Picture Mode - Allow
changes to custom picture
modes. (Available after a custom
picture mode is locked)
Delete Picture Mode - Delete
a custom picture mode. Inputs
assigned to that custom picture
mode will be set to Calibrated
picture mode. (Available after a
custom picture mode is saved)
.@#
.Space
äêí
VIZIO
Save
To unlock all custom picture modes:
3. Highlight Save and press OK.
PICTURE MODE EDIT - MyMode
Save Picture Mode
1. From the PICTURE MODE EDIT
menu, use the Arrow buttons
to highlight Unlock Picture
Mode, and then press OK. The
UNLOCK PICTURE MODE menu
is displayed.
•
•
4. Press the EXIT button to exit the
Unlock Picture Mode
menu screens.
Delete Picture Mode - MyMode
2. Use the Number Pad on your remote to enter your 4-digit PIN.
3. Make any desired changes to the picture modes.
4. Relock the picture modes, if desired. You must create a new
4-digit PIN.
•
Reset Picture Mode† - Reset
the picture mode settings to
factory default values.
5. Press the EXIT button to exit the menu screens.
* Not available on HDMI input 5.
†
Only available on customized preset modes.
Only available on HDMI input.
‡
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Deleting a Custom Picture Mode
Custom picture modes that are no longer needed can be deleted.
Inputs assigned to a deleted custom picture mode
become assigned to the Calibrated picture mode.
To delete a custom picture mode:
1. From the PICTURE MODE EDIT menu,
use the Arrow buttons to highlight
To delete the user created Custom 1 picture mode,
select the Delete button.
Delete Picture Mode, and then
Delete
Cancel
press OK. The DELETE PICTURE
MODE window is displayed.
2. Use the Left/Right Arrow buttons to highlight Delete and press
OK.
3. Press the EXIT button to exit the menu screens.
Resetting a Picture Mode
A preset picture mode that has been edited can be restored to the
factory default settings.
To reset a customized preset picture mode:
1. From the PICTURE MODE EDIT menu,
use the Arrow buttons to highlight
Select Reset to restore Standard
picture mode to factory defaults.
Reset Picture Mode, and then
Reset
Cancel
press OK. The RESET PICTURE MODE
window is displayed.
2. Use the Left/Right Arrow buttons to highlight Reset and press OK.
3. Press the EXIT button to exit the menu screens.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Adjusting the Color Tuner Settings
To turn color channels off and on:
To adjust the 11 Point White Balance settings:
The Color Tuner settings allow you to adjust the HSB color and 11
point white balance, turn color channels off for testing, and display
color bar, flat, and ramp test patterns.
1. From the COLOR CALIBRATION menu, use the Arrow buttons
to highlight Color Tuner, and then press OK. The Color Tuner
menu is displayed.
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the 11 Point White Balance menu is displayed.
The Color Tuner, 11 Point White Balance, and test
patterns allow technicians to manually calibrate the TV.
Calibration requires specialized training, an input with
precisely set colors, and a specialized light meter.
11 Point White Balance
Color Tuner
Gain
5%
Red
0
Green
0
Blue
0
Red
0
Green
Blue
0
Cyan
Magenta
Yellow
Hue
0
5
0
0
0
0
0
0
25
-2
0
-14
0
Saturation
Brightness
Offset
-1
-4
-24
0
-22
0
0
To adjust the HSB color settings:
1. From the COLOR CALIBRATION menu, use the Arrow buttons
to highlight Color Tuner, and then press OK. The Color Tuner
menu is displayed.
Gain
0
0
2. Use the Arrow buttons on the remote to highlight Red, Green,
2. Use the Arrow buttons on the remote to highlight the Gain
or Blue.
and Color values you wish to adjust. Press the OK button and
use the Left/Right Arrow buttons to adjust the value. When
you are finished, press the OK button to save the setting.
Color Tuner
3. Press the OK button to turn the color channel off or on. An X
Red
0
Green
Blue
0
Cyan
Magenta
Yellow
appears over a color channel that has been turned off.
Hue
0
5
0
0
0
0
0
0
25
-2
0
-14
0
3. When you are finished, press the EXIT button.
Saturation
Brightness
Offset
-1
-4
4. Use the Arrow buttons to highlight another color channel to
turn off or on. Only two color channels can be turned off at the
same time.
-24
0
-22
0
0
Gain
0
0
5. When you are finished with the color channels, press the EXIT
2. Use the Arrow buttons on the remote to highlight the Hue,
Saturation, Brightness, Offset, or Gain of the color you wish
to adjust. Press the OK button.
button.
3. Use the Left/Right Arrow buttons to adjust the value. When
you are finished press the OK button to save the setting.
4. When you are finished adjusting the color tuner settings, press
the EXIT button.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4
To show or hide the SMPTE Test Pattern:
To show or hide the Flat Test Pattern:
To show or hide the Ramp Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the SMPTE Test Pattern menu is displayed.
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Flat Test Pattern menu is displayed.
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Ramp Test Pattern menu is displayed.
Ramp Test Pattern
SMPTE Test Pattern
Flat Test Pattern
Off
Off
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to select the color for the ramp test
pattern. Selecting a color immediately shows that color ramp.
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to highlight On to show the SMPTE
Pattern.
2. Use the Arrow buttons on the remote to highlight Off. Use the
Left/Right Arrow buttons to select the percentage brightness
for the flat test pattern. Selecting a percentage immediately
shows the flat pattern at that brightness.
—or—
—or—
To hide the SMPTE Test Pattern, use the Left/Right Arrow
—or—
To hide the Ramp Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
buttons to highlight Off.
To disable the Flat Test Pattern, use the Left/Right Arrow
3. When you are finished, press the EXIT button.
buttons to highlight Off.
3. When you are finished, press the EXIT button.
3. When you are finished, press the EXIT button.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4
•
•
Lip Sync - Adjusts the synchronization between the display
Changing the Equalizer Settings
The graphic equalizer has several pre-set modes and allows you to
create one custom mode.
ADJUSTING THE AUDIO SETTINGS
image and the accompanying audio track.
To adjust the audio settings:
Digital Audio Out - Changes the type of processing for
digital audio out and HDMI ARC output when connected to a
home theater audio system. Select PCM or Bitstream.
1. Press the MENU button on the
To select a pre-set audio mode:
VIZIO
remote. The on-screen menu
is displayed.
AUDIO
1. Press the MENU button on the remote. The on-screen menu is
TV Speakers
On
On
On
0
displayed.
You must select Bitstream for audio with more than
two channels (3.0, 5.0, or 5.1, for example).
Surround Sound
Volume Leveling
Balance
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The AUDIO menu
is displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
press OK. The AUDIO menu is displayed.
+
+
-
-
•
Analog Audio Out - Sets the volume control properties for
the RCA connector when connected to a home theater audio
system. Select Variable if you are controlling the volume with
the TV’s volume controls, or select Fixed if an external audio
device (sound bar or AV receiver) will control the volume.
Equalizer - Adjusts the boost or attenuation of different
frequencies using either preset or custom settings. See
Lip Sync
0
3. Use the Arrow buttons to highlight Equalizer and press OK. The
Audio Mode and equalizer settings screen appears.
Digital Audio Out
Analog Audio Out
Equalizer
PCM
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/
Right Arrow buttons to change
the setting:
Fixed
4. Use the Left and Right Arrow buttons to select an audio mode.
The equalizer bars change to reflect the mode.
Delete Audio Mode
•
•
5. Press the EXIT button on the remote.
•
•
•
TV Speakers - Turns the
To create, modify, or replace the single custom equalizer setting:
built-in speakers on or off.
Delete Audio Mode - Deletes a custom audio mode created
using the Equalizer Settings. See Deleting the Custom Audio
1. Press the MENU button on the remote. The on-screen menu is
displayed.
When the TV speakers are set to On, DTS signals
cannot be passed through digital audio outputs.
2. Use the Arrow buttons on the remote to highlight Audio and
4. When you have finished adjusting the audio settings, press the
press OK. The AUDIO menu is displayed.
Surround Sound - Surround sound uses DTS TruSurround™
to deliver an immersive surround sound experience from
the TV’s internal speakers. TruSurround completes the
entertainment experience by providing deep, rich bass and
by delivering crisp details and clear, intelligible dialog. Select
On or Off.
Volume Leveling - Volume leveling uses DTS TruVolume™
to maintain consistent volume levels during transitions
between program content, AV formats, and input sources.
Select On or Off. In a few cases, volume leveling may
artificially suppress volume increases, making it difficult to
hear dialog or flattening sudden noises. If this occurs, turn
volume leveling off.
EXIT button on the remote.
3. Use the Arrow buttons to highlight Equalizer and press OK. The
Audio Mode and equalizer settings screen appears.
4. Use the Left and Right Arrow buttons to select any audio mode
as a starting point.
5. Use the Arrow buttons to highlight a frequency and then press
OK.
6. Use the Up and Down Arrow buttons to adjust the boost (up)
and attenuation (down) for the frequency.
7. Use the Left and Right Arrow buttons to select another
frequency, if desired, and adjust it.
•
Balance - Adjusts the loudness of the audio output from the
left and right speakers.
8. Press the EXIT button on the remote.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Deleting the Custom Audio Mode
To delete the custom audio mode that has been created:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Audio and
press OK. The AUDIO menu is displayed.
3. Use the Arrow buttons to highlight Delete Audio Mode and
press OK. The TV displays, “To delete the user created custom
audio mode, select the Delete button.”
4. Highlight Delete and press OK.
5. Press the EXIT button on the remote.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Setting the Auto Power Off Feature
Blanking the Screen
You can blank the screen while there is audio streaming. This
feature helps save energy and the life of the screen.
SETTING TIMERS
To help save energy, your TV is set by default to turn off after
10 minutes without a video or audio signal. This feature can be
deactivated.
Setting the Sleep Timer
When activated, the TV’s sleep timer will turn the TV off after a set
period of time.
To blank the screen:
To set the Auto Power Off feature:
1. From the TIMERS menu, use the Up/Down Arrow buttons on
1. Press the MENU button on the
1. From the TIMERS menu, use the Up/Down Arrow buttons on
the remote to highlight Blank Screen and press OK.
VIZIO
TIMERS
remote. The on-screen menu is
the remote to highlight Auto Power Off.
displayed.
Sleep Timer
Off
10 minutes
Off
To Exit the Blank Screen
Press any button other than the Volume and Mute
buttons on the remote to exit the blank screen.
2. Use the Left/Right Arrow buttons on the remote to change
whether the TV will turn off. If you don’t want the TV to turn off
when there is no signal, change the setting to Off. Otherwise,
select 10 minutes.
2. Use the Arrow buttons on the
remote to highlight Timers and
press OK. The TIMERS menu is
displayed.
Auto Power Off
Screen Saver
Blank Screen
3. When you have finished setting the auto power off time, press
3. Use the Left/Right Arrow
buttons on the remote to
the EXIT button on the remote.
highlight the period of time after
which you want the TV to go to
sleep: 30, 60, 90, 120, or 180
minutes. If you don’t want the
sleep timer to activate, change
the setting to Off.
Enabling the Screen Saver
If there is no on-screen content or static content when audio is
streaming, the backlight is turned off, saving energy. You can set
the time before the screen saver begins.
To set the Screen Saver:
4. When you have finished setting
the sleep timer, press the EXIT
button on the remote.
1. From the TIMERS menu, use the Up/Down Arrow buttons on
the remote to highlight Screen Saver.
2. Use the Left/Right Arrow buttons on the remote to change
the time before the screen saver begins. If you don’t want the
screen saver to be active, change the setting to Off. Otherwise,
select 2, 10, or 20 minutes.
3. When you have finished setting the screen saver time, press
the EXIT button on the remote.
To Exit the Screen Saver
Press any button other than the Volume and Mute
buttons on the remote to exit the screen saver.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings using the Manual
Setup feature.
Finding MAC Addresses for Network Setup
The security settings on your router may require you to enter the
TV's MAC address in the router's settings.
USING THE NETWORK CONNECTION MENU
Your TV is Internet-ready, featuring both an Ethernet port and
built-in high-speed Wireless-N.
To change advanced network settings:
To find the TV's MAC address:
Connecting to a Wireless Network
To connect to a wireless network whose network name (SSID) is
being broadcast:
1. From the NETWORK menu,
1. From the NETWORK menu, highlight Manual Setup and press
VIZIO
MANUAL SETUP
highlight Manual Setup and
press OK. The MANUAL SETUP
menu is displayed.
OK. The MANUAL SETUP menu is displayed.
2. Find the MAC address for the TV at the bottom of the list. The
MAC addresses for the connections in use are displayed:
DHCP
Off
If your TV is connected to a network with an Ethernet
cable, you will not see the wireless network connection
menu. You must disconnect the Ethernet cable to set
up a wireless network connection.
IP Address
____.____.____.____
2. To change the settings manually,
use the Arrow buttons on the
remote to highlight DHCP and
then use the Left/Right Arrow
buttons to change the setting to
Off.
•
RJ45 MAC - The Ethernet or RJ45 MAC address may be
needed to set up your network when you have connected
the TV to your network with an Ethernet (Cat 5) cable.
Subnet Mask
____.____.____.____
____.____.____.____
____.____.____.____
Default
Gateway
Pref. DNS
Server
•
Wireless MAC - The Wireless (WiFi) MAC address may be
needed to connect your TV to your network with WiFi.
1. Press the MENU button on the
Alt. DNS
Server
remote. The on-screen menu is
____.____.____.____
0:0:0:0:0:0
VIZIO
NETWORK
3. Use the Arrow and OK buttons
displayed.
RJ45 MAC
Wireless MAC
Save
to adjust each setting:
2. Use the Arrow buttons on the
0:0:0:0:0:0
Wired Connection
Disconnected
•
•
•
IP Address - The IP address
remote to highlight Network
and press OK. The NETWORK
menu is displayed.
Wireless Access Points
assigned to the TV.
Cancel
Subnet Mask - The subnet
mask.
Default Gateway - Your
network’s default gateway
address.
3. If you do not see your wireless
network displayed, highlight
More Access Points and press
OK. The WIRELESS ACCESS
POINTS menu, which is a list of
available wireless networks, is
displayed.
4. Highlight the name of your
wireless network (this is the
network’s SSID) and press OK.
More Access Points
WPS
Manual Setup
Hidden Network
Test Connection
•
•
Pref. DNS Server - Your
preferred domain name
server address.
Alt. DNS Server - Your alternate domain name server
address.
4. Use the Arrow buttons on the remote to highlight Save and
5. Using the on-screeen keyboard,
enter your network’s password,
then highlight Connect and
press OK.
press OK.
5. Press the EXIT button on the remote.
6. Press the EXIT button on the remote.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Connecting to a Hidden Network
Testing Your Network Connection
To connect to a wireless network whose network name (SSID) is not
being broadcast:
To test your network connection:
1. From the NETWORK menu, highlight Test Connection and
1. From the NETWORK menu,
press OK.
VIZIO
ENTER ACCESS POINT NAME
highlight Hidden Network and
press OK. The ENTER ACCESS
POINT NAME screen is displayed.
2. The TEST CONNECTION screen displays the connection
method, network name, signal strength, and download speed
of your network connection.
Enter your access point name. This
is used to connect to an access
point with a hidden SSID.
2. Using the on-screen keyboard,
enter your network’s name
(SSID), then highlight Connect
and press OK.
3. Press the EXIT button on the remote.
3. Using the on-screen keyboard,
enter your network’s password,
then highlight Connect and
press OK.
a
j
s
b c d e
f
g h i
k
t
l
m n o p q r
u v w x
y
7
z
8
0
9
1
2
3
4
5
6
.@#
Space
äêí
4. Press the EXIT button on the
Connect
remote.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Selecting a Channel Source
Select the type of tuner input you will be using. You can select either
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
Adding New Channels
SETTING UP CHANNELS
Occasionally, you may need to add a new range of channels or
add a new analog channel. You can do this by using the Partial
Channel Search and Add Analog Channel options. This is quicker
than scanning all possible channels.
You can use the TV’s Channels menu to:
•
•
•
•
•
Select a Channel Source
Find Channels
Perform a Partial Channel Scan
Manually Add Channels
Select channels to skip
1. From the CHANNELS menu, highlight Channel Source and
VIZIO
CHANNELS
press OK. The CHANNEL SOURCE menu displays.
To add a range of new channels:
Channels not searched
Channel Source
Find Channel
2. Highlight Antenna or Cable and press OK. Press EXIT.
Cable
1. From the CHANNELS menu, highlight Partial Channel Search,
and press OK. The PARTIAL CHANNEL SEARCH menu is
displayed.
Scanning for Channels
Partial Channel Search
Add Analog Channel
Skip Channel
The TV may need to scan for channels before it can display programs
and their associated information. A channel scan is required for
free over-the-air channels (using an antenna) and cable channels
from an out-of-the-wall connection (without a cable box). Moving
the TV to an area with different channels requires the TV to scan for
channels again.
2. Highlight Scan Mode and select the type of channel you are
adding: Analog, Digital, or Analog/Digital.
Analog Audio
Stereo
Digital Language
English
3. Highlight From Channel and enter the channel where you
want to begin the scan. (Use the Left Arrow button to
backspace. Use the Number Pad on the remote to enter the
channel.)
To perform an Auto Channel Scan:
1. From the CHANNELS menu,
VIZIO
FIND CHANNELS
4. Highlight To Channel and enter the channel where you want
to end the scan. (Use the Left Arrow button to backspace. Use
the Number Pad on the remote to enter the channel.)
highlight Find Channels, and
press OK. The auto channel scan
begins.
Channels Found
Digital:
Analog: 19
18% Complete
Cancel
0
5. Highlight Start and press OK. The partial channel search
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
begins.
6. Wait until the partial channel search is 100% complete.
Highlight Done and press OK.
3. Press the EXIT button on the
remote.
7. Press the EXIT button on the remote.
If the channel scan is cancelled,
the channels that were already
discovered are retained. A new
channel scan will clear all channels.
Cancel the channel scan.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
4
To add a single new analog channel:
Skipping Channels
After a channel scan is completed, you may find that some channels
are too weak to watch comfortably. There may also be some
channels you do not want to view. You can remove these channels
from the TV’s memory with the Skip Channel feature.
1. From the CHANNELS menu,
highlight Add Analog Channel
and press OK. The ADD ANALOG
CHANNEL menu is displayed.
VIZIO
ADD ANALOG CHANNEL
Enter Channel
Add Channel
Channels that have been removed with the Skip
Channel feature can still be viewed if the channel
is entered using the Number Pad. If you wish to
completely block a channel from being viewed, use the
parental controls. See Locking and Unlocking Channels
2. Highlight Enter Channel # and
use the Number Pad on the
remote to enter the number of
the channel you are adding.
3. Highlight Add Channel and
press OK. The TV scans for the
channel.
To remove a channel:
4. When the TV is done scanning
for the channel, press the EXIT
button on the remote.
1. From the CHANNELS menu,
VIZIO
highlight Skip Channel, and
press OK. The SKIP CHANNEL
menu is displayed.
SKIP CHANNEL
Test 0
Test 1
Test 2
Test 3
Test 4
Test 5
1
1
P
P
2. For each channel you wish to
remove, use the Up/Down
1-2
2
Arrow buttons on the remote to
highlight the channel and press
OK. A P appears to the right of
each channel you select.
2-2
2-3
P
3. When you have selected all
of the channels you wish to
remove, press the EXIT button
on the remote.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
4
To use the Digital Language feature:
LISTENING TO ALTERNATE AUDIO
1. From the CHANNELS menu,
highlight Digital Language
and press OK. The DIGITAL
LANGUAGE menu is displayed.
Changing the Analog Audio Language
VIZIO
DIGITAL LANGUAGE
Some analog over-the-air (free) and cable channels broadcast
programs in more than one language. The TV’s Analog Audio
feature allows you to listen to audio in an alternate language using
Secondary Audio Programming (SAP).
English
Español
Français
2. Select your preferred lanaguage:
English, Español or FrançaIS.
Press OK.
Not all programs are broadcast in SAP. The Analog
Audio Language feature only works when the program
being viewed is being broadcast with Secondary Audio
Programming.
3. Press the EXIT button on the
remote.
To use the Analog Audio feature:
1. From the CHANNELS menu,
highlight Analog Audio and
press OK. The ANALOG AUDIO
menu is displayed.
VIZIO
ANALOG AUDIO
Stereo
SAP
2. Select Stereo, SAP (secondary
audio programming), or Mono.
Press OK.
Mono
3. Press the EXIT button on the
remote.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Changing the Appearance of Digital Closed Captions
•
•
•
•
Background Color - Change the color of the background
SETTING UP CLOSED CAPTIONING
directly behind the text.
Digital closed captions can be displayed according to your
preference. See the diagram on the next page for an explanation of
the parts of the closed caption area.
Your TV can display closed captions for programs that include them.
Closed captions display a transcription of a program’s dialogue.
Background Opacity - Change the transparency of the
background directly behind the text.
Window Color - Change the color of the closed captioning
box.
Window Opacity - Change the opacity of the closed
captioning box.
To change the appearance of digital closed captions:
If the program you are viewing is not being broadcast
with closed captions, the TV will not display them.
1. From the CLOSED CAPTIONS
VIZIO
DIGITAL STYLE
menu, use the Arrow buttons to
highlight Digital Style and press
OK.
Caption Style
Text Style
Custom
As Broadcast
Large
4. When you are satisfied with the appearance of the closed
The Closed Captions menu does not appear when an
HDMI input is selected.
captions, press the EXIT button on the remote.
2. Use the Left/Right Arrow
buttons on the remote to select
Custom. The DIGITAL STYLE
menu appears as shown.
Text Size
Text Color
Green
Text Opacity
Text Edges
As Broadcast
As Broadcast
As Broadcast
Black
To activate or deactivate closed captions:
1. Press the MENU button on the
Text Edges Color
Background Color
Background Opacity
Window Color
Window Opacity
VIZIO
CLOSED CAPTIONS
3. Use the Up/Down Arrow
buttons on the remote to
highlight the setting you wish to
change, then use the Left/Right
Arrow buttons to change the
setting:
remote. The on-screen menu is
displayed.
As Broadcast
Red
Closed Captions
Off
CC1
CS1
2. Use the Arrow buttons on the
remote to highlight Closed
Captions and press OK. The
CLOSED CAPTIONS menu is
displayed.
Analog Closed Captions
Digital Closed Captions
Digital Style
As Broadcast
•
Caption Style - Choose
As Broadcast to keep
default settings or Custom
to manually change each
setting.
3. Use the Arrow buttons on the
remote to highlight Closed
Captions and then use the Left/
Right Arrow buttons to select
On or Off.
•
Text Style - Change the
font used for the closed
captioning text.
4. Use the Arrow buttons on
the remote to highlight either
Analog or Digital Closed
Captions.
•
•
•
•
Text Size - Make the text larger or smaller.
Text Color - Change the color of the text.
Text Opacity - Change the transparency of the text.
Text Edges - Change the effects at the edges of the text,
such as raising the edges or adding drop shadows.
5. Use the Left/Right Arrow
buttons on the remote to select
the caption channel you wish to
display, then press EXIT.
•
Text Edges Color - Change the color of the text edge
effects.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Typical choices include:
•
Opaque background, transparent window—Only a strip of
background appears behind the text, expanding as the text
appears. This is the typical "As Broadcast" mode.
Background
Text
•
Opaque background and window in the same color—When
text appears, the entire line fills with color at once.
In the example below, the closed caption text is green, the
background is black, and the window is red.
CLOSED CAPTION TEXT SAMPLE
Window
CLOSED CAPTIONS SCREEN LAYOUT
40
Download from Www.Somanuals.com. All Manuals Search And Download.
4
RENAMING DEVICES ON THE INPUT MENU
You can rename the inputs to make them easier to recognize on
the Input menu. For example, if you have a DVD player connected
to the Component input, you can rename that input to display “DVD
Input Port
To change the name of an input:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
VIZIO
NAME INPUT
2. Use the Arrow buttons on the remote to highlight Devices and
HDMI-1
DVD_
DVD
press OK. The DEVICES menu is displayed.
Input Name
3. Highlight the input device that you want to rename and press
Custom Name
OK.
4. To use a preset input name:
a
j
s
b c d e
f
g h i
k
t
l
m n o p q r
a. Highlight the Input Port row and press OK.
u v w x
y
z
0
b. Highlight the input name you want to use and press OK.
1
2
3
4
5
6
7
8
9
—or—
.@#
Space
äêí
OK
To enter a custom name:
Cancel
a. Enter your custom label using the on-screen keyboard.
b. Highlight OK and press OK.
Select the input name from a list
of common device names (Blu-ray,
Cable Box, DVD, etc).
c. The Input Name changes to show the custom name that
you created.
5. When you have finished naming your input, press the EXIT
button on the remote.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Viewing System Information
To view technical data and status information about your TV and
network connection:
Changing the On-Screen Menu Language
Your TV can display the on-screen menu in different languages.
CHANGING THE TV SETTINGS
Using the System menu, you can:
To change the on-screen menu language:
VIZIO
SYSTEM
•
•
View system information
Change the on-screen menu
language
1. Press the MENU button on the remote. The on-screen menu is
1. Press the MENU button on the
displayed.
System Information
Menu Language
Time & Local Settings
Parental Controls
View Mode
VIZIO
remote. The on-screen menu is
English
MENU LANGUAGE
2. Use the Arrow buttons on the remote to highlight System and
displayed.
•
Set time zone and local
settings
English
press OK. The SYSTEM menu is displayed.
2. Use the Arrow buttons on the
Español
3. Highlight System Information and press OK.
remote to highlight System and
Overlay
VIZIOTV
Off
•
•
•
•
•
•
Set up parental controls
Resize the video size
Change the TV’s DLNA Name
Adjust wide mode
Adjust the CEC settings
Adjust when the power
indicator is illuminated
Français
press OK. The SYSTEM menu is
Wide
4. Use the Up/Down Arrow buttons to scroll through the system
displayed.
TV Name
information.
CEC
3. Use the Arrow buttons on
the remote to highlight Menu
Language and press OK. The
MENU LANGUAGE menu is
displayed.
Power Indicator
Reset & Admin
5. When you are finished reviewing the system information, press
the EXIT button on the remote.
•
Reset the TV settings & set
up administrative controls
4. Highlight your preferred
language (English, Español, or
Français) and press OK.
View status information for the TV,
current input and your network.
5. Press the EXIT button on the
remote.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Setting the Time and Local Settings
Using the Parental Controls
Enabling or Disabling Program Ratings
To ensure the correct time is displayed when you press the INFO
button, set the TV’s time zone:
The TV’s parental controls allow you to prevent the TV from
displaying certain channels or programs without a password.
To manage program content according to its rating, you must
enable the Program Rating feature.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
The Parental Controls menu only appears when:
To enable or disable the Program Rating feature:
VIZIO
June 11, 2015 11:48AM
•
You are using the tuner to receive your TV signals, such as
when you are using an antenna for Over-the-Air signals or
when connected to cable TV directly from the wall (no cable
box).
1. From the PARENTAL CONTROLS menu, highlight Locks and
Time Zone
Pacific (-8)
Auto
press OK. The LOCKS menu is displayed.
Daylight Savings Time
Zip Code
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
12345
USA
2. Select On or Off and press OK.
Country
•
You have a device connected using a composite video cable
or a coaxial cable, such as a VCR, satellite or cable box, or
DVR.
Locking and Unlocking Channels
When a channel is locked, it will be inaccessible. Locking a channel
is a good way to prevent children from viewing inappropriate
material.
3. Use the Arrow buttons on the
remote to highlight Time &
Local Settings and press OK.
The menu headed by the local
date and time is displayed.
Other devices have their own parental control settings.
To lock or unlock a channel:
1. From the PARENTAL CONTROLS menu, highlight Channel
4. Highlight Time Zone and press
OK. The TIME ZONE menu is
displayed.
Locks and press OK. The CHANNEL LOCKS menu is displayed.
Accessing the Parental Controls Menu
To access the Parental Controls menu:
2. Highlight the channel you want to lock or unlock and press OK.
5. Highlight your time zone and press OK.
3. When a channel is locked, the Lock icon appears
locked.
1. Press the MENU button on the remote. The on-screen menu is
The channel is not accessible unless the parental PIN is
entered.
6. Highlight Daylight Saving Time and press OK. The DAYLIGHT
SAVING TIME menu is displayed. Choose On if it is currently
Daylight Savings Time, Off if it is Standard Time, or Auto to
have the system automatically detect Daylight Savings Settings.
displayed.
2. Use the Arrow buttons on the remote to highlight System and
4. When a channel is unlocked, the Lock icon appears
press OK. The SYSTEM menu is displayed.
unlocked. The channel is accessible.
7. If you are in the United States, highlight Zip Code. Enter your Zip
code using the keypad on the remote, then press OK. Zip codes
are often used by V.I.A. Plus Apps to give you the most accurate
location-based information, such as weather or news.
3. Use the Arrow buttons on the remote to highlight Parental
Controls and press OK.
4. Enter your parental PIN. If you have not set a PIN, enter the
default, 0000. The PARENTAL CONTROLS menu is displayed.
8. Highlight Country and press OK. The COUNTRY menu is
displayed.
To set a custom parental passcode, see Changing the
9. Highlight your country and press OK.
10. Press the EXIT button on the remote.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Blocking and Unblocking Content by Rating
Changing the Parental Control PIN
Resetting the Content Locks
A channel may sometimes broadcast programs that are meant for
children, and at other times broadcast programs that are meant
for mature audiences. You may not want to block the channel
completely using a channel lock, but you may wish to block certain
programs from being viewed.
If you use the parental controls, you should change the PIN to
prevent children from accessing inappropriate material.
To reset the content locks to the factory-default settings:
1. From the PARENTAL CONTROLS menu, highlight Reset Locks
and press OK. The TV displays, “Select Reset to restore Parental
Controls to factory defaults.”
To change the parental control PIN:
1. From the PARENTAL CONTROLS menu, highlight Change PIN
When this is the case, you can use the TV’s Rating Block feature to
block content based on its rating.
and press OK. The CHANGE PIN menu is displayed.
2. Highlight Reset and press OK.
2. In the NEW PIN field, use the Number Pad on the remote to
enter your new 4-digit parental control PIN.
For a list of content ratings and their definitions, visit
3. In the CONFIRM PIN field, use the Number Pad on the remote
to re-enter your new 4-digit parental control PIN.
To block or unblock content by its rating:
4. Write down your new parental control PIN and save it in a
secure location.
1. From the PARENTAL CONTROLS menu, highlight the content
type you want to adjust and press OK:
5. Press the EXIT button on the remote.
USA TV - USA television program broadcasts.
USA Movie - USA movie broadcasts.
Canadian English - Canadian English television program
broadcasts.
Canadian French - Canadian French television program
broadcasts.
2. For each rating type you want to block or unblock, use the
Up/Down and Left/Right Arrow buttons on the remote to
highlight the rating type and press OK.
3. When the rating type is blocked, the Lock icon appears
locked. Content with this rating and all higher ratings cannot
be viewed.
4. When the rating type is unblocked, the Lock icon appears
unlocked. Content with this rating and all lower ratings can be
viewed.
If you want to block all unrated content, highlight Block
Unrated Shows and use the Arrow buttons on the remote to
select On.
5. When you are finished adjusting the rating level blocks, press
the EXIT button on the remote.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Changing the View Mode Settings
You can resize the video content to fit while the menu is open.
not stretched, but the sides of the image are extremely
CHANGING THE SCREEN ASPECT RATIO
stretched. If you are watching widescreen (1.85:1 or 2.35:1)
content with black bars on the top and bottom, the black
bars will still appear on the top and bottom of the display
image.
The TV can display images in five different modes: Normal, Stretch,
Panoramic, Wide, and Zoom. Each mode displays the picture
differently.
To change the view mode settings:
1. Press the MENU button on the
•
Standard Definition (480i and 480p) - Fills the screen
from the left to right edges.
720p - Not available.
1080p and 1080i - Not available.
VIZIO
VIEW MODE
remote. The on-screen menu is
Some programs have black bars on the top or sides of the picture
so that the picture keeps its original shape. Examples include
wide-screen movies and older television programs.
displayed.
Viewport
•
•
2. Use the Arrow buttons on the
Overlay
remote to highlight System and
To change the screen aspect ratio:
Centered Overlay
•
•
Wide stretches a 4:3 aspect ratio picture to the edges of
the screen. Since the picture is being stretched, the display
image may appear distorted—figures appear short and fat.
If the program is already formatted for widescreen viewing
(1.85:1 or 2.35:1), then black bars will appear on the top
and bottom of the display image.
Zoom expands images evenly in all directions (33% taller
and 33% wider) with black bars to fit the screen. A 720p
image will fill a 1080p screen.
press OK. The SYSTEM menu is
1. Press the WIDE button on the
displayed.
remote.
3. Use the Arrow buttons on the
remote to highlight View Mode
and press OK. The VIEW MODE
menu is displayed.
2. Use the Arrow buttons to
highlight the aspect ratio you
Normal
Normal
Stretch
wish to view and press OK.
Panoramic
•
Normal preserves the content’s
original aspect ratio and size.
4. Highlight Viewport, Overlay,
or Centered Overlay and press
OK.
Wide
Wide
•
Standard Definition (480i and
480p—old TV programs) - Since
the 4:3 aspect ratio is not large
enough to fill the TV’s screen,
black bars are added to the left
and right of the display image.
•
•
•
Standard Definition - Not available.
720p - Fills a 1080p screen
1080p and 1080i - Not available.
Zoom
Zoom
•
•
•
Viewport - The entire picture
is visible in the space to the
right of the menu.
Overlay - The left-hand
portion of the picture
covered by the menu.
Note: Aspect ratio settings may
vary by Input source.
•
•
720p - Fills a 720p or 1080p screen.
1080p and 1080i HD - Fills a 720p or 1080p screen.
Tip: The aspect ratio cannot be changed for Ultra HD
content or for any video content on HDMI-5.
Centered Overlay - The picture extends off of the right
side of the screen.
•
Stretch expands a widescreen image to fill the screen from
top to bottom and stretches it half as much from right to
left. Figures appear tall and thin.
the video content.
•
•
Standard Definition - Not available.
720p - If you are watching widescreen 1.85:1 content, the
image will fill the screen. With 2.35:1 widescreen content,
one-sixth of the image is cut off by the left and right
sides of the screen.
•
1080p and 1080i - Not available.
•
Panoramic stretches a 4:3 aspect ratio picture to the left
and right edges of the screen. The center of the image is
45
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Adjusting the CEC Settings
Turning the Power Indicator On or Off
Changing the DLNA Name of Your TV
The CEC function on your TV enables you to control devices
connected to HDMI (ARC) input with the included remote, without
any programming. Using CEC, your VIZIO TV remote can control:
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light
to be on.
Enter a custom DNLA name for your TV (Up to 10 characters
long). DNLA allows your TV to display content from DNLA-certified
computers, cameras, tablets, and smartphones.
•
•
•
Power on/off
Volume
Mute
To turn the Power Indicator Light on or off:
To create a custom name for your TV:
VIZIO
TV NAME
1. Press the MENU button on the remote. The on-screen menu is
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
VIZIOTV_
displayed.
Not all HDMI devices support CEC. See your device’s
user manual for details.
2. Use the Arrow buttons on the remote to highlight System and
a
j
b c d e
f
g h i
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
press OK. The SYSTEM menu is displayed.
k
t
l
m n o p q r
s
u v w x
y
7
z
8
0
9
3. Highlight Power Indicator and press OK.
1
2
3
4
5
6
To enable, disable, or adjust CEC settings:
.@#
.com Space
äêí
4. Use the Up/Down Arrow buttons to select On or Off, then
1. Set up your audio device and connect it to the HDMI-1(HDMI
Arc) input on the TV
3. Use the Arrow buttons on the
remote to highlight TV Name
and press OK. The TV NAME
menu is displayed.
press OK.
OK
Cancel
2. On your audio device, select the HDMI ARC input
3. Press the MENU button on the remote. The on-screen menu is
4. Use either the on-screen
keyboard or keyboard on your
remote control to enter a name
for your TV (the name can be up
to 10 characters long).
displayed.
4. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
5. Use the Arrow buttons on the remote to highlight CEC and
press OK. The CEC menu is displayed.
When you are finished, highlight
OK and press the OK button.
6. Highligh CEC and press OK. Select a setting and then press OK.
5. Press the EXIT button on the remote.
•
•
CEC - To use CEC, you must select on.
System Audio Control - To control your device’s audio
using the TV’s remote control, select On.
•
Device Discovery - To determain if your device is
connected and supports CEC, select Device Discovery and
then press OK.
7. Press the EXIT button on the remote.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5. If you have changed the default parental control PIN, enter it
now.
Enabling and Disabling Smart Interactivity
Your TV can display program-realted information as part of the
broadcast. To enable or disable Smart Interactivity:
USING THE RESET & ADMIN MENU
You can use the TV’s Reset & Admin menu to restore the TV to its
factory default settings.
The TV displays, “Select Reset to restore all TV settings to
factory defaults and clear all account information.”
1. Press the MENU button on the remote. The on-screen menu is
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory
defaults.
displayed.
6. Highlight Reset and press OK.
2. Use the Arrow buttons on the remote to highlight System and
7. Wait for the TV to turn off. The TV will turn back on shortly
press OK. The SYSTEM menu is displayed.
afterward and the Setup App will begin.
If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost!
3. Highlight Reset & Admin and press OK. The RESET & ADMIN
menu is displayed.
This includes any V.I.A. Plus Apps that you have added
and any changes you have made to the settings for
those Apps.
4. Highlight Smart Interactivity and press OK.
5. Select On or Off and press OK.
6. Press the EXIT button on the remote.
To restore the TV to its factory default settings:
1. Press the MENU button on the
VIZIO
RESET & ADMIN
remote. The on-screen menu is
displayed.
Reset TV to Factory Defaults
2. Use the Arrow buttons on the
VIZIO Privacy Policy
remote to highlight System and
Smart Interactivity
Store Demo
On
press OK. The SYSTEM menu is
displayed.
3. Highlight Reset & Admin and
press OK. The RESET & ADMIN
menu is displayed.
4. Highlight Reset TV to Factory
Defaults and press OK.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
4
USING THE GUIDED SETUP MENU
USING THE INFO WINDOW
Using Guided Setup
The TV’s Setup App can be used to easily set up the TV channel or to
connect the TV with your network.
The Info Window can be displayed by pressing the INFO or GUIDE
button on the remote:
•
Press the INFO or GUIDE button one time to display
channel, input, and display information.
To use guided setup:
•
Press the INFO or GUIDE button two times to display the
program title, program rating, audio information, and the
start and end times of the program.
1. Press the MENU button on the
VIZIO
remote. The on-screen menu is
GUIDED SETUP
displayed.
Channel Setup
2. Highlight Guided Setup and
Network Setup
press OK.
3. Highlight the guided setup you
want to use and press OK:
Network/Display Information
Channel/Input Information
•
Channel Setup - Set up the
TV channel.
•
Network Setup - Connect
the TV to the Internet using
your network.
28-1
KCET-HD
1080p
6:15pm
Normal
Dolby D Stereo
11:00AM - 12:00PM
TV-PG-V
Oliver’s Holiday Surprise
4. Follow the on-screen
instructions. When finished,
press the EXIT button on the
remote.
Oliver wakes up one morning only to discover that his pals are missing. In this
hour-long holiday special, Oliver goes on a journey in search of his pals. Who
knows what he’ll encounter on the way?
Program Title/Rating Information
Program Description
DIGITAL EPISODE GUIDE & INFO WINDOW
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the USB Media Player
5
Preparing Your USB Drive to Play USB Media
To play USB media, you must first save your files onto a USB thumb
drive:
Removing the USB Drive from the TV
To safely remove your USB drive from the TV:
Using the USB Media Player
The USB Media Player allows you to connect a USB thumb drive to
your TV and play music, video, or photos.
1. Turn off the TV.
•
•
The USB thumb drive must be formatted as FAT32.
Files on the USB thumb drive must end in a supported file
extension (.mp3, .jpg, etc.).
2. Disconnect your USB thumb drive from the USB port on the
side of the TV.
•
The player is not designed to play media from external hard
drives, MP3 players, cameras, or smartphones
Do not remove the USB thumb drive while the TV is on.
Doing so may damage the drive.
Playing USB Media
To play your USB media:
1. Connect your USB thumb drive to the USB port on the side of
the TV.
2. Press the V button on the remote
.
3. Use the Arrow buttons to highlight the Multimedia app in the
V.I.A. Plus Dock and press OK. (The highlighted App is in the
center of the dock.)
4. Use the Arrow buttons to highlight the USB drive from the list
and press OK.
5. Use the Arrow buttons to highlight the type of media to
display (Music, Video, or Photo) and press OK.
6. Use the Arrow buttons to highlight the file you want to display.
Press OK. Music or video files play, photos display.
You can display your photos in fullscreen. Select the
photo, press OK, then highlight Fullscreen and press
OK.
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Now Playing Information
Displays song title, album title, and artist name.
Back Button
Album Art
Highlight this button and
press OK to return to
the previous screen.
If included on the USB
thumb drive and associated
with your music, the album
art will display here.
Progress Bar
Displays the duration of the current-
ly-playing song. The blue bar will
lengthen as the song progresses.
Connected
Sources
Fab Apple Dream
On January Mix Comp
By Oliver
VIZIO
Music
USB1: MyFlashDrive
Displays
connected USB
devices.
00:04:00
00:04:46
MyFlashDrive\Audio\root\My Music
#
1
2
3
4
5
Track
Starry Summer
Downspin
Album
Artist
Duration
Summer Mix
Summer Mix
Beach Mix
Beach Mix
Breezy Mix
JCheesy
JCheesy
Oliver
2:42
6:20
8:46
4:21
7:58
Current Folder
My Music
Mango Dream
Crystal Waters
Smooth Waves
The Dash
Rio Steve
Playback Controls
Use to control audio
playback. Highlight Play/
Pause, Previous, or Next
and press OK.
Folder Contents/
Playlist
Toggle Music/Photos
This area displays
the contents of the
currently selected
folder. You can browse
files and folders using
the Arrow and OK
buttons on the remote.
Browse Photos
Sort by Album/Artist/
Track
Sort:
Artist A-Z
All
View:
Page 1 of 1
Toggle between
viewing all content
and only viewing
folders.
Page Information
If your USB thumb drive has more
files than can be displayed on a
single screen, the page information is
displayed here.
MUSIC PLAYER
50
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Back Button
Highlight this button and
press OK to return to
the previous screen.
Connected
Sources
VIZIO
Video
USB1: MyFlashDrive
Displays
connected USB
devices.
MyFlashDrive\Video\root\My Videos
#
1
2
3
4
File
Date
Duration
00:23:43
00:38:18
00:41:08
00:05:32
Family Vacation - California
26th Birthday Party
Summer 2012
-
-
-
-
Current Folder
My Videos
Greatest Trip Ever
Folder Contents/
Playlist
This area displays
the contents of the
currently selected
folder. You can
browse among files
using the Arrow and
OK buttons on the
remote.
Sort by Date
or File Name
Sort:
Date New-Old
Folders
View:
Page 1 of 1
View All or
View Folders
Page Information
If your USB thumb drive has more
files than can be displayed on a
single screen, the page information is
displayed here.
VIDEO PLAYER
51
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Folder Contents
This area displays the
contents of the currently
selected folder. You can
browse files and folders
using the Arrow and OK
buttons on the remote.
Back Button
Back Button
Highlight this button and
press OK to return to
the previous screen.
Highlight and press OK to return to left column.
Current Folder
Displays the folder path.
Connected
Sources
VIZIO
Photo
USB1:
Displays
VIZIO_2GB\Photo\root
connected USB
devices.
Current Folder
root
A.jpg
D.jpg
B.jpg
E.jpg
C.jpg
F.jpg
Start Fullscreen
Slideshow
Start Slideshow
Sort by Date
Sort:
Name A-Z
Thumbnails
Settings
or File Name
View Thumbnails/Folders
View:
Adjust Slideshow Settings
View Music Files
Browse Music
File Name: D 1920x1080
Resolution: 1920x1080
Size:
1607270KB
H.jpg
I.jpg
G.jpg
Page 1 of 1
Photo Information
Displays the name,
resolution, and file
size of the selected
photo.
Page Information
If your USB thumb drive has more
files than can be displayed on a
single screen, the page information is
displayed here.
PHOTO VIEWER
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using VIZIO Internet Apps Plus® (V.I.A. Plus)
6
VIZIO Internet Apps Plus® (V.I.A. Plus) delivers popular online content
to your TV. V.I.A. Plus features a selection of Apps that allow you to
watch movies and TV shows, listen to music, get weather and news
information, and more–all on demand.
A high-speed Internet connection is required to receive
product updates and to access online content.
not yet connected to your home network.
USING THE V.I.A. PLUS APP DOCK
The V.I.A. Plus App Dock is where all of your V.I.A. Apps are accessed.
To launch an App from the Dock:
V Button
1. Press the V Button on the remote.
2. Highlight a V.I.A. Plus App by
scrolling left and right using the
Left/Right Arrow buttons on
the remote. (The highlighted App
is in the center of the dock.)
3. Press the OK button on the
remote to launch the App.
Using the App Launcher Keys
Note: App location, appearance, and availability subject to change without notice.
App Launcher Buttons
Using the App Launcher Keys onthe
remote launch the apps pictured
on the buttons. Pressing the App
Launcher Key will also turn the TV on
(if it is off).
V.I.A. Plus App Dock
The specific apps on the App
Launcher keys vary from model to
model.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
6
USING THE FULLSCREEN V.I.A. APPS WINDOW
The Fullscreen V.I.A. Plus Apps window allows you to add and store
Apps. The Apps on the first page are displayed in the Dock and
Apps on additional pages can be moved to the Dock.
To open the Fullscreen V.I.A. Plus Apps Window:
1. Press the V Button on the remote twice.
2. Highlight an App by using the Arrow buttons on the remote.
3. Press the OK button on the remote to launch the App.
My Apps Tab
Displays the apps
installed on your
TV.
4. To exit from an open App or to close the App Dock, press the
App Store Tabs
Exit button on the remote.
Browse through Apps
on these tabs to run
them and add them
to your My Apps tab.
Installed Apps
The Apps displayed
here are also
available in the V.I.A.
Plus App Dock.
Note: App location, appearance, and availability subject to change without notice.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
6
FULLSCREEN V.I.A. PLUS APPS WINDOW
OVERVIEW
The Fullscreen V.I.A. Plus Apps Window allows you to add, delete
and organize your Apps. The My Apps tab displays Apps that
are already installed on your TV. The Apps on the first page are
displayed in the V.I.A. Plus App Dock.
Apps with a small lock icon in the right-hand corner
cannot be deleted.
The following tabs are located at the top of your Fullscreen V.I.A.
Plus Apps Window:
•
•
•
My Apps: Displays apps that are installed on your TV.
Featured: Displays apps that are recommended by Yahoo!
Latest: Displays apps that were most recently added to the
library of apps.
•
•
All Apps: Displays every app that is available for download.
Categories: Displays apps sorted into categories: Spotlight,
Yahoo!, Weather, News and Finance, Movies and TV, Photos
and Video, Sports, Music, Social, Information, Fun and
Games, Shopping, and Local TV.
•
Settings (
): Displays App software information and
development settings.
You can also preview Apps without installing them.
Simply highlight the App you wish to preview and press
OK to open it.
Note: App location, appearance, and availability subject to change without notice.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Deleting an App from the My Apps Tab
To delete an app from your TV:
Moving an App in My Apps
You can organize your Apps on your My Apps tab by moving them
where you want.
CUSTOMIZING THE V.I.A. PLUS APPS WINDOW
You can add, delete, and move apps around on your My Apps tab
for a custom look and feel.
1. Use the Arrow buttons on the remote to highlight the App you
wish to delete.
To move the Apps on your My Apps tab:
Adding an App to the My Apps Tab
To add an app to your TV:
2. Press and hold the OK button. The following options appear:
1. Use the Arrow buttons on the remote to highlight the app you
wish to move.
Note: App location, appearance, and availability subject to change without notice.
1. Use the Arrow buttons on the remote to highlight one of the
App Store tabs (Featured, Latest, All Apps, or Categories).
2. Press and hold the OK button. The following options appear:
Note: App location, appearance, and availability subject to change without notice.
2. Use the Arrow buttons to highlight the app you wish to add.
3. Press and hold the OK button until [App Name] has been
added to your My Apps list appears.
Once the app has been installed, a star appears in the top right-hand
corner of the app icon as shown below.
Star
3. Press OK to delete the app. The following dialog box appears:
Only the Apps on the first page appear in the Dock.
4. Use the Left/Right Arrow buttons to select Delete and press OK.
The App is removed from your My Apps tab.
Note: App location, appearance, and availability subject to change without notice.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
6
3. Use the Arrow buttons to move the app to the desired location
and press OK to place the app. When you can move the app, it
appears as shown below.
Note: App location, appearance, and availability subject to change without notice.
Cursor showing the location that the
app will move to
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Ultra HD Content
7
WHAT IS ULTRA HD?
WHAT YOU NEED TO VIEW ULTRA HD CONTENT
WHAT ARE HDMI 2.0 AND HDCP 2.2?
Ultra HD (UHD) offers four times the resolution of 1080p (that’s
twice as many pixels in each direction, horizontally and vertically).
The detail and resolution available from UHD makes everything you
watch more vibrant and lifelike, giving you a phenomenal viewing
experience.
To view Ultra HD content, you will need:
Your E-Series TV supports the latest HDMI standards. This allows
next-gen cable and satellite receivers, Blu-ray players, game
consoles, and more to deliver Ultra HD content.
•
•
•
Ultra HD TV
High-speed Internet connection
802.11n Wireless Router
In addition, the TV supports HDCP 2.2 technology which allows you
to play protected content from Ultra HD players and next-gen video
game consoles. The D-Series is built to be future proof. It will allow
users to view Ultra HD content as it becomes readily available. See
connected HDMI 2.0/HDCP 2.2 enabled devices.
or
The VIZIO D-Series Ultra HDTV is your crystal-clear window to a
brand-new entertainment experience, featuring powerful Ultra HD
performance, best-in-class picture quality, and premium Smart TV
features.
802.11ac Wireless Router (For best performance)
•
•
SSID (Wireless network name) and Network Password
High-Speed HDMI 2.0 cable
In addition, E-Series is fully equipped and ready for nearly all Ultra
HD entertainment options. With support for HEVC decoding and
the latest Wi-Fi standard 802.11ac (that’s up to 3x faster than
802.11n1), M-Series lets you stream Ultra HD from popular apps
such as Netflix®. Its superior Spatial Scaling Engine accurately and
beautifully transforms your favorite 1080p entertainment such
as sports, movies, and TV shows into spectacular Ultra HD. And
support for the latest HDMI standards enables Ultra HD playback
from next generation cable and satellite receivers, Blu-ray players
and game consoles.
Inputs
UHD up to 30 Hz
UHD up to 60 Hz
HDCP 2.2
Ports
1, 2, 3, 4
5
And at least one of the following:
•
Netflix® or other streaming service account that offers Ultra
HD content
1, 2, 5
•
Device with 4K Ultra HD output such as a
high-performance PC
Remember: For best performance with HDMI port
5, only connect high-performance devices that are
capable of outputting 1080p or higher resolution.
1
Source: IEEE standard 802.11 specifications. Maximum throughput rate of 802.11ac (1300
Mbps) is approximately three times faster than that of 802.11n (450 Mbps). Actual rate will
vary, and will be subject to router model, site environment, range, Internet bandwidth,
and other factors.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting & Technical Support
A
Do You Have Questions? Find Answers At
SUPPORT.VIZIO.COM
Find help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• Product Updates
• And More
Live Chat
Support Available
You can also contact our
award-winning support team at:
(877) 698-4946 (TOLL-FREE)
Phone:
Hours Of Operation:
Monday - Friday: 7 am to 11 pm (CSt)
Saturday - Sunday: 9 am to 6 pm (CSt)
59
Download from Www.Somanuals.com. All Manuals Search And Download.
A
Take A Moment To Register Your Product At
VIZIO.COM/PRODUCT-REGISTRATION
Why Register?
Customized Support
Get assistance quickly with your information on-hand.
News & Offers
Take advantage of the latest news and special offers from VIZIO.
Safety & Satisfaction
Stay up to date with important product updates and notifications.
REGISTER YOUR VIZIO PRODUCT NOW
60
Download from Www.Somanuals.com. All Manuals Search And Download.
A
The remote is not responding.
There is no sound.
The image quality is not good.
•
Make sure the batteries are properly inserted matching
the - and + symbols.
Replace the batteries with fresh ones.
•
•
•
Press Volume Up on the remote control.
Press the MUTE button on the remote to ensure mute is off.
Check the audio settings. See Adjusting the Audio Settings
Check the audio connections of external devices (Blu-ray
player, game console, cable/satellite box) that are
connected to the TV.
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
•
For the best image quality, view high-definition programs
using digital sources. Connect your devices with HDMI
cables.
•
•
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The TV displays “No Signal.”
•
•
•
Press the INPUT button on the remote control to select a
different input source.
If you are using cable TV or antenna connected directly to
the TV, scan for channels. See Scanning for Channels on
•
The picture is distorted.
•
Move the TV away from electrical appliances, cars, and
fluorescent lights.
Ensure all cables are securely attached.
•
There is no power.
The sound is flat or dialog is not audible.
•
•
•
Ensure the TV is plugged into a working electrical outlet.
Ensure the power cable is securely attached to the TV.
Press the Power/Standby button on the remote or on the
back of the TV to turn the TV on.
The display image does not cover the entire screen.
•
Turn off Volume Leveling. See Adjusting the Audio Settings
•
If you are using TV, AV, or Component with 480i input,
press the
mode.
button on the remote to change the screen
The colors on the TV don’t look right.
•
Adjust the Color and Tint settings in the Picture menu. See
Select a pre-set picture mode. See Adjusting the Picture
Settings on page 25. VIZIO recommends selecting
Calibrated.
The power is on, but there is no image on the screen.
The TV has pixels (dots) that are always dark.
•
•
Ensure all cables are securely attached to the TV.
Ensure all devices are connected correctly. Devices differ;
see your device’s user manual for details.
•
Your UHD TV is precision-manufactured using an
extremely high level of technology. However, sometimes
pixels may not display correctly. These types of
occurrences are inherent to this type of product and do
not constitute a defective product.
•
•
•
Adjust Brightness, Contrast, or Backlight. See Adjusting
Press the INPUT button on the remote to select a
different input source.
•
Check all cables to ensure they are securely attached.
The buttons on the remote aren’t working.
The V.I.A. Plus Apps are not working
•
•
•
Ensure you are only pressing one button at a time.
Point the remote directly at the TV when pressing a button.
Replace the remote batteries with new ones. See
Replacing the Batteries on page 12.
•
Be sure your TV is connected to the internet. See Using
the Network Connection Menu on page 34. Instructions
for testing your connection are on page 33.
•
•
Restart the App by pressing the EXIT button to close the
App, then open the App.
Reboot your TV by pressing the POWER button on the
remote, then turn it back on.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
A
I see “noise” or static on the screen.
•
When your TV’s digital capabilities exceed a digital
broadcast signal, the signal is up-converted (improved) to
match your TV’s display capabilities. This up-converting
can sometimes cause irregularities in the image.
•
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
When I change input source, the display image changes size.
•
The TV remembers the viewing mode on each input
source. If the viewing mode on the new input source
differs from the one on the input source you switch from,
the difference may be noticeable.
•
See Changing the Screen Aspect Ratio on page 23..
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
B
D40u-D1
40"
D40u-D1
Screen Size:
Remote Control Model:
Certifications:
XRT122
Viewable Area:
39.96"
UL, cUL, FCC Class B, HDMI 1.4/2.0, Dolby Digital Plus
120ꢀV @ 60ꢀHz
Dimensions w/ Stand:
w/o Stand:
35.97" x 23.46" x 8.27"
35.97" x 23.46" x 2.68"
Voltage Range:
Weight w/ Stand:
w/o Stand:
17.63 lbs
17.19 lbs
Power Consumption:
Standby Power:
52.3ꢀW
<0.5ꢀW
Yes
LCD Backlight:
Active LED Zones:
Refresh Rate:
Full-Array LED
8 Zones
Zero Bright Pixel Guarantee:
120 Hz Effective Refresh Rate
Clear Action:
240
Maximum Resolution:
Dynamic Contrast Ratio:
Pixel Pitch:
3840 x 2160 (UHD, 2160p)
5,000,000:1
0.2304mm (H) X 0.2304mm (V)
Viewing Angle:
176° (H) / 176° (V)
HDMI Inputs:
5
Component Video Inputs:
Composite Inputs:
RF Antenna Input:
USB Port:
1
1 (Shared with Component)
1
1
Ethernet:
1
RCA Analog Stereo Output, Optical Digital
English, French, Spanish
Yes
Audio Outputs:
OSD Language:
Ambient Light Sensor:
63
Download from Www.Somanuals.com. All Manuals Search And Download.
B
D50u-D1
50"
D50u-D1
Screen Size:
Remote Control Model:
Certifications:
XRT122
Viewable Area:
49.50"
UL, cUL, FCC Class B, HDMI 1.4/2.0, Dolby Digital Plus
120ꢀV @ 60ꢀHz
Dimensions w/ Stand:
w/o Stand:
44.24" x 28.27" x 10.04"
44.24" x 25.91" x 2.52"
Voltage Range:
Weight w/ Stand:
w/o Stand:
30.87 lbs
30.0 lbs
Power Consumption:
Standby Power:
67.0ꢀW
<0.5ꢀW
Yes
LCD Backlight:
Active LED Zones:
Refresh Rate:
Full-Array LED
12 Zones
Zero Bright Pixel Guarantee:
120 Hz Effective Refresh Rate
Clear Action:
240
Maximum Resolution:
Dynamic Contrast Ratio:
Pixel Pitch:
3840 x 2160 (UHD, 2160p)
5,000,000:1
0.2854mm (H) X 0.2855mm (V)
Viewing Angle:
176° (H) / 176° (V)
HDMI Inputs:
5
Component Video Inputs:
Composite Inputs:
RF Antenna Input:
USB Port:
1
1 (Shared with Component)
1
1
Ethernet:
1
RCA Analog Stereo Output, Optical Digital
English, French, Spanish
Yes
Audio Outputs:
OSD Language:
Ambient Light Sensor:
64
Download from Www.Somanuals.com. All Manuals Search And Download.
B
D55u-D1
55"
D55u-D1
Screen Size:
Remote Control Model:
Certifications:
XRT122
Viewable Area:
54.64"
UL, cUL, FCC Class B, HDMI 1.4/2.0, Dolby Digital Plus
120ꢀV @ 60ꢀHz
Dimensions w/ Stand:
w/o Stand:
48.76" x 30.75" x 10.04"
48.76" x 28.39" x 2.52"
Voltage Range:
Weight w/ Stand:
w/o Stand:
37.48 lbs
36.6 lbs
Power Consumption:
Standby Power:
82.4ꢀW
<0.5ꢀW
Yes
LCD Backlight:
Active LED Zones:
Refresh Rate:
Full-Array LED
14 Zones
Zero Bright Pixel Guarantee:
120 Hz Effective Refresh Rate
Clear Action:
240
Maximum Resolution:
Dynamic Contrast Ratio:
Pixel Pitch:
3840 x 2160 (UHD, 2160p)
5,000,000:1
0.315mm (H) X 0.315mm (V)
Viewing Angle:
178° (H) / 178° (V)
HDMI Inputs:
5
Component Video Inputs:
Composite Inputs:
RF Antenna Input:
USB Port:
1
1 (Shared with Component)
1
1
Ethernet:
1
RCA Analog Stereo Output, Optical Digital
English, French, Spanish
Yes
Audio Outputs:
OSD Language:
Ambient Light Sensor:
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
C
UNITED STATES AND CANADA
phone at 877 MY VIZIO (877-698-4946). The VIZIO Technical Support
hours are 6:00AM to 9:00PM Monday through Friday and 7:00AM to
4:00PM Saturday and Sunday, Pacific Time.
What This Warranty Does Not Cover
BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL
THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT,
PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO
THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND,
WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR
A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.
This warranty contains a binding arbitration agreement and a class action
waiver for United States residents. If you live in the United States, the
binding arbitration agreement and class action waiver affect your rights
under this warranty. Please read the text under the section titled “Binding
Arbitration Agreement; Class Action Waiver (U.S. Residents Only)”
carefully.
This warranty does not cover: (a) cosmetic damage; (b) normal wear and
tear; (c) improper operation; (d) improper voltage supply or power surges;
(e) signal issues; (f) damage from shipping; (g) acts of God; (h) customer
misuse, modifications or adjustments; (i) installation, set-up, or repairs
attempted by anyone other than by a VIZIO authorized service center;
(j) products with unreadable or removed serial numbers; (k) products
requiring routine maintenance; or (l) products sold “AS IS”, “CLEARANCE”,
“FACTORY RECERTIFIED”, or by a non-authorized reseller.
Your Obligations Before Service
You must obtain pre-authorization before sending your product to a
VIZIO service center. You may be required to supply a purchase receipt
(or copy) to show that the product is within the warranty period.
When you return a product to a VIZIO service center, you must ship the
product in its original packaging or in packaging that affords an equal
degree of protection. VIZIO Technical Support will provide instructions for
packing and shipping the product to the VIZIO service center.
ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A
PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL
SHIP-IN WARRANTY SERVICE. If this occurs, your product will be restored
to its original state. You will be responsible for restoring all applicable user
data and downloaded applications. Recovery and reinstallation of user
data and downloaded applications is not covered under this warranty.
In order to protect your personal information, VIZIO recommends that
you always clear all personal information from the product before it is
serviced, regardless of the servicer.
What to Do If You Are Not Satisfied With Service
If you feel VIZIO has not met its obligations under this warranty, you may
attempt to resolve the issue informally with VIZIO. If you are unable to
resolve the issue informally and wish to file a formal claim against VIZIO,
and if you are a resident of the United States, you must submit your claim
to binding arbitration according to the procedures described below,
unless an exception applies. Submitting a claim to binding arbitration
means that you do not have the right to have your claim heard by a judge
or jury. Instead your claim will be heard by a neutral arbitrator.
How Long This Warranty Lasts
For non-commercial use, VIZIO warrants the product on the terms set
forth below for one (1) year from the date of original purchase. For
commercial use, VIZIO warrants this product on the terms set forth below
for ninety (90) days from the date of original purchase.
What This Warranty Covers
Binding Arbitration Agreement; Class Action Waiver (U.S. Residents
Only)
VIZIO warrants the product against defects in materials and workmanship
when the product is used normally in accordance with VIZIO’s user guides
and manuals.
VIZIO’s Responsibilities
UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS
COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY
OR CLAIM RELATING IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING
ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS
WARRANTY, A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCT’S
SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING
ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION
ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED
BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH
ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY
PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more
about the American Arbitration Association and its rules for arbitration
concerns a transaction in interstate or international commerce, the
Federal Arbitration Act will apply.
If VIZIO determines that a product is covered by this warranty, VIZIO will
(at its option) repair or replace it, or refund the purchase price to you.
There will be no charge for parts or labor during the warranty period.
Replacement parts may be new or recertified at VIZIO’s option and sole
discretion. Replacement parts and VIZIO’s labor are warranted for the
remaining portion of the original warranty or for ninety (90) days from
warranty service, whichever is longer.
Except where restricted by law, this warranty applies only to the original
purchaser of a new product. The purchase must have been made from an
authorized retailer in the United States (including Puerto Rico) or Canada.
The product must also be located in the country where it was purchased
at the time of warranty service.
Zero Bright Pixel Defect Guarantee (Displays Only)
Types of Service
Your product may qualify for a warranty against “zero bright pixel” defects
for the duration of the warranty on select new product purchases. To
determine if this guarantee applies to your product, refer to the model’s
pixel” guarantee on the box, or contact VIZIO Technical Support at the
email address or telephone number below.
Displays that are 32 inches or larger will usually be serviced in-home.
In-home service requires complete and easy access to the product and
does not include de-installation or re-installation of the product. In-home
service is subject to availability. VIZIO will provide other service options
when in-home service is not available.
All other VIZIO products must be sent to a VIZIO service center to obtain
warranty service. VIZIO is not responsible for transportation costs to the
service center, but VIZIO will cover return shipping to the customer.
The filing fees to begin and carry out arbitration will be shared between
you and VIZIO, but in no event will your fees ever exceed the amount
allowable by the American Arbitration Association, at which point VIZIO
will cover all additional administrative fees and expenses. VIZIO waives its
How to Get Service
additional help and troubleshooting. To obtain warranty service, contact
VIZIO Technical Support via email at [email protected] or via
66
Download from Www.Somanuals.com. All Manuals Search And Download.
C
right to recover attorneys’ fees in connection with any arbitration under
this warranty. If you are the prevailing party in an arbitration to which
the Supplementary Procedures for Consumer-Related Disputes applies,
then you are entitled to recover attorneys’ fees as the arbitrator may
determine.
then the entire section titled “Binding Arbitration Agreement; Class Action
case the provisions of the section titled “Binding Arbitration Agreement;
Class Action Waiver (U.S. Residents)” will not apply.
Waiver (U.S. Residents Only)” will not apply. This warranty applies to the
maximum extent not prohibited by law.
Exclusions and Limitations
Changes to Warranty
This warranty may change without notice, but any change will not affect
youroriginalwarranty. Checkwww.vizio.comforthemostcurrentversion.
TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE
NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE
LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE.
SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU.
The dispute will be governed by the laws of the state or territory in which
you resided at the time of your purchase (if in the United States). The
place of arbitration will be Irvine, California, or your county of residence
(if in the United States). The arbitrator will have no authority to award
punitive or other damages not measured by the prevailing party’s actual
damages, except as may be required by statute. The arbitrator will not
award consequential damages, and any award will be limited to monetary
damages and will include no equitable relief, injunction, or direction to
any party other than the direction to pay a monetary amount. Judgment
on the award rendered by the arbitrator will be binding and final, except
for any right of appeal provided by the Federal Arbitration Act, and may
be entered in any court having jurisdiction. Except as may be required by
law, neither you nor VIZIO nor an arbitrator may disclose the existence,
content, or results of any arbitration under this warranty without the
prior written consent of you and VIZIO.
ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE,
WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU
AGREE THAT NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY
DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY
GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER
PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY.
NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED,
OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING
WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH
ARBITRATION OR PROCEEDING.
VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF
INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR
LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS
ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
INLIEUOFANYOTHERREMEDYFORANYANDALLLOSSESANDDAMAGES
RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S
NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER
WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY,
AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR
OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS
NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Exceptions to Binding Arbitration Agreement and Class Action Waiver
IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION
AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify
VIZIO in writing within sixty (60) days of the date that you purchased the
product; (2) your written notification must be mailed to VIZIO at 39 Tesla,
Irvine, CA 92618, Attn: Legal Department; and (3) your written notification
must include (a) your name, (b) your address, (c) the date you purchased
the product, and (d) a clear statement that you wish to opt out of the
binding arbitration agreement and class action waiver.
How the Law Applies
This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state and province to province. This
warranty applies to the greatest extent permitted by applicable law.
General
NoemployeeoragentofVIZIOmaymodifythiswarranty.Ifanytermofthis
warranty, other than the class action waiver, is found to be unenforceable,
that term will be severed from this warranty and all other terms will
remain in effect. If the class action waiver is found to be unenforceable,
In addition, you may pursue a claim in small claims court in your county of
residence (if in the United States) or in Orange County, California. In such
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Mexico Limited Warranty
C
VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU
DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE
THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE
OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED
RETAILER WHERE YOU PURCHASED IT.
service, contact VIZIO Technical Support via email at serviciovizio@ home. In-home service requires complete and easy access to the
warrantyserviceslatinamerica.com or via phone at 01-800-801- product and does not include de-installation or re-installation of
0096 or 001-855-472-7444. The VIZIO Technical Support hours are the product. In-home service is subject to availability. VIZIO will
9:00AM to 6:00PM Monday through Friday, Central Standard Time. provide other service options when in-home service is not available.
All other VIZIO products must be sent to a VIZIO service center to
Your Obligations Before Service
obtain warranty service. VIZIO is not responsible for transportation
Warrantor
You must obtain pre-authorization before sending your product to costs to the service center, but VIZIO will cover return shipping to
a VIZIO service center. You may be required to supply a purchase the customer.
The warrantor under this warranty is VIZIO Sales & Marketing
Mexico S. de R.L. de C.V.
receipt (or copy) to show that the product is within the warranty
period.
What This Warranty Does Not Cover
How Long This Warranty Lasts
When you return a product to a VIZIO service center, you must ship This warranty does not cover: (a) cosmetic damage; (b) normal
the product in its original packaging or in packaging that affords wear and tear; (c) improper operation; (d) improper voltage supply
an equal degree of protection. VIZIO Technical Support will provide or power surges; (e) signal issues; (f) damage from shipping; (g)
instructions for packing and shipping the product to the VIZIO acts of God; (h) customer misuse, modifications or adjustments;
For non-commercial use, VIZIO warrants the product on the terms
set forth below for one (1) year from the date of original purchase.
For commercial use, VIZIO warrants this product on the terms set
forth below for ninety (90) days from the date of original purchase.
service center.
(i) installation, set-up, or repairs attempted by anyone other than
ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON by a VIZIO authorized service center; (j) products with unreadable
A PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME or removed serial numbers; (k) products requiring routine
ANDALLSHIP-INWARRANTYSERVICE.Ifthisoccurs,yourproductwill maintenance; or (l) products sold “AS IS”, “CLEARANCE”, “FACTORY
be restored to its original state. You will be responsible for restoring RECERTIFIED”, or by a non-authorized reseller.
all applicable user data and downloaded applications. Recovery What to Do If You Are Not Satisfied With Service
and reinstallation of user data and downloaded applications is If you feel VIZIO has not met its obligations under this warranty,
not covered under this warranty. In order to protect your personal you may attempt to resolve the issue informally with VIZIO. If you
information, VIZIO recommends that you always clear all personal are unable to resolve the issue informally and wish to file a formal
information from the product before it is serviced, regardless of claim against VIZIO, you may do so.
What This Warranty Covers
VIZIO warrants the product against defects in materials and
workmanship when the product is used normally in accordance
with VIZIO’s user guides and manuals.
Except where restricted by law, this warranty applies only to the
original purchaser of a new product. The purchase must have been
made from an authorized retailer in Mexico. The product must also
be located in Mexico at the time of warranty service.
the servicer.
Exclusions and Limitations
Zero Bright Pixel Defect Guarantee (Displays Only)
Your product may qualify for a warranty against “zero bright pixel”
defects for the duration of the warranty on select new product
purchases. To determine if this guarantee applies to your product,
look for the “zero bright pixel” guarantee on the box, or contact
VIZIO Technical Support at the email address or telephone number
below.
TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE
VIZIO’s Responsibilities
If VIZIO determines that a product is covered by this warranty, VIZIO
ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED
ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
will (at its option) repair or replace it, or refund the purchase price to
WARRANTYOFMERCHANTABILITYANDFITNESSFORAPARTICULAR
you. There will be no charge for parts or labor during the warranty
PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY
period. Replacement parts may be new or recertified at VIZIO’s
PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
option and sole discretion. Replacement parts and VIZIO’s labor are
warranted for the remaining portion of the original warranty or for
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
ninety (90) days from warranty service, whichever is longer.
VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF
How to Get Service
mx for additional help and troubleshooting. To obtain warranty
INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR
Types of Service
Displays that are 32 inches or larger will usually be serviced in-
LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF
68
Download from Www.Somanuals.com. All Manuals Search And Download.
C
THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY VIZIO Sales & Marketing Mexico S. de R.L. de C.V.
FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES PRESIDENTE MASARYK 111 PISO 1
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL COL. POLANCO V SECCIÓN
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR DELEGACION MIGUEL HIDALGO, MEXICO D.F. 11560
EXCLUSION MAY NOT APPLY TO YOU.
Warranty Service Provider
IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND
DAMAGESRESULTINGFROMANYCAUSEWHATSOEVER(INCLUDING
VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS,
NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR
LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION AND IN
ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND
ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
Warranty Support LATAM SA de C.V.
Calle Nubes No. 412
Col. Jardines del Moral
Leon Gto. Mexico, C.P. 37160
01-800-801-0096 or 001-855-472-7444
Date of purchase:
Model:
Brand:
To make a warranty claim, present your product and either this
warranty, duly stamped by the establishment from whom you
purchased the VIZIO product, or a valid invoice or receipt showing
the date of purchase.
How the Law Applies
This warranty gives you specific legal rights, and you may also
have other rights, which vary from state to state and province to
province. This warranty applies to the greatest extent permitted by
applicable law.
Under the terms of this warranty, VIZIO or its representative must
exchange parts and components of the product and include labor
and shipping expenses of the product on which this warranty is
valid, within the service network, at no cost to the consumer.
VIZIO is not obligated to honor the warranty in the following cases.
(a) When the product has been used under other than normal
conditions.
(b) When the product has not been operated according to the
accompanying instructions for use.
(c) When the product has been altered or repaired by persons not
authorized by VIZIO or the respective seller.
General
No employee or agent of VIZIO may modify this warranty. If any
term of this warranty is found to be unenforceable, that term will
be severed from this warranty and all other terms will remain in
effect. This warranty applies to the maximum extent not prohibited
by law.
Changes to Warranty
This warranty may change without notice, but any change will not
current version.
INFORMATION EXCLUSIVELY FOR MEXICO
To make a warranty claim, or to obtain parts, components, supplies
and accessories, you may contact the importer of record, the
warranty service provider, or the establishment from whom you
purchased the VIZIO product.
Importer of Record
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal & Regulatory Information
D
Software Licenses
configurations, performance, design and other product information
If you are traveling internationally, check the customs regulations
for device use for each country you will visit, and check the power
cord and adapter requirements for each location in which you plan
to use the computer as voltage, frequency and plug configurations
may vary.
All software is provided subject to a software license agreement(s)
and you agree that you will be bound by such license agreement(s)
in addition to these terms. Your use of this product is subject to VIZIO’s
privacy policy, which may be updated from time to time, and is available to view
described herein are subject to change without notice. VIZIO, Inc.
is not responsible for typographical, technical, or descriptive errors.
VIZIO, the VIZIO logo, the V logo, and other terms and phrases are
trademarks or registered trademarks of VIZIO, Inc.
Warning: To reduce risk of electric shock, fire or
damage to your device or other property, do not
attempt to power the device with a voltage converter
kit sold
Export Regulations
HDMI, HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing
LLC.
Customer acknowledges that the VIZIO products, which include
technology and software, are subject to customs and export control
laws in the United States (“US”). The products may also be subject to
the customs and export control laws and regulations of the country
in which the products are manufactured and/or received.
for appliances.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. Used under license.
Battery Disposal
Internet Connectivity
Networkconditions,environmentalandotherfactorsmaynegatively
affect connectivity and the resulting video quality, if any.
license from DTS Licensing Limited. DTS, the Symbol, & DTS and
the Symbol together are registered trademarks, and DTS Studio
Sound is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
Caution: Battery cells may explode. Do not dispose of
the battery in a fire or with ordinary household waste.
Dispose of batteries promptly. Replace the battery
only with the same or equivalent type of battery
recommended by VIZIO.
The applications and content of the applications pictured herein or
described in accompanying documentation may only be available
in certain countries or languages, may require additional fees
or subscription charges, and may be subject to future updates,
modifications or discontinuation without notice. VIZIO has no
control over third party applications or content and assumes
no responsibility for the availability or interruption of such
applications or content. Additional third party terms, conditions and
restrictions apply. Information in this Quick Start Guide is subject
to change without notice. To review the most updated version
of this Quick Start Guide and the associated User Manual, go to
Dolby and the double-D symbol are registered trademarks of
Dolby Laboratories.
Other names of companies, products, and services used in this
Quick Start Guide may be trademarks, trade names or service marks
of others and VIZIO, Inc. dis- claims any interest in trademarks, trade
names or service marks other than its own. Mention of non-VIZIO
products is for informational purposes only.
© 2015 VIZIO, Inc. All Right Reserved.
Caution: Avoid exposing a drive to magnetic fields.
Security devices with magnetic fields may include
airport walk-through devices and security wands.
Airport conveyor belts or similar security devices that
check carry-on luggage generally use X-rays and should
not cause magnetic damage to drives.
This Quick Start Guide may not be copied in whole or in part
without the written permission of VIZIO, Inc. VIZIO, Inc. has made
reasonable efforts to ensure the accuracy of the information
provided herein. All product specifications, functionality, features,
70
Download from Www.Somanuals.com. All Manuals Search And Download.
D
FCC Class B Radio Interference Statement
Notice
Canada Notice for License-Exempt Radio Apparatus
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions,
maycauseharmfulinterferencetoradiocommunications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/Display technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Shielded interface cables and AC power cord, if any, must be used
in order to comply with the emission limits.
The manufacturer is not responsible for any radio or Display
interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such
interference.
This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
This device operates on a no-protection no-interference basis.
Should the user seek to obtain protection from other radio services
operating in the same TV bands, a radio license is required. Please
consult Industry Canada’s document CPC-2-1-28, Optional Licensing
for Low-Power Radio Apparatus in the TV Bands, for details.
FCC Warning
Cet appareil est conforme aux CNR exempts de licence d’Industrie
Canada. . Son fonctionnement est sujet aux deux conditions
suivantes:
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
1.
et
le dispositif ne doit pas produire de brouillage préjudiciable,
Caution
Always use an AC/DC power adapter that is properly grounded. Use
the AC cords listed below for each area.
2.
ce dispositif doit accepter tout brouillage reçu, y compris un
brouillage susceptibledeprovoquerunfonctionnementindésirable
Cet appareil fonctionne sur une base sans protection et sans
interférence. Dans le cas où l’utilisateur cherche à obtenir de
la protection des autres services de radio fonctionnant sur les
mêmes bandes TV, aucune license est requise. Veuillez consulter le
document CPC-2-1-28 d’Industrie Canada, License optionnelle pour
les appareils radio de faible puissance, pour plus de détails.
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Declaración de México:
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2015 VIZIO INC. ALL RIGHTS RESERVED.
122815OC-US-A
Download from Www.Somanuals.com. All Manuals Search And Download.
|