19W330DG
C
O
L
O
U
R
T
E
L
E
V
I
S
I
O
N
O
W
N
E
R
’
S
M
A
N
U
A
L
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
SETTING UP
Safety Precautions – Some do's and don'ts for you to be aware of
Installation and important information
2
3
The remote control – an at-a-glance guide
4
Connecting external equipment – a guide to connecting equipment to the back of the television
Side Connections and controls – switching on the television, standby, using the side controls
Tuning the television – digital tuning
5
7
8
Tuning the television – digital programme sorting, auto tuning, manual tuning
Tuning the television – analogue tuning, programme sorting
Tuning the television – analogue manual tuning
9
10
11
12
Tuning the television – APS, choosing a language
CONTROLS AND FEATURES
Analogue general controls – selecting programme positions, time display
Stereo and bilingual transmissions – stereo/mono or dual language broadcasts
Child lock – disabling the buttons on the television
Picture format
Analogue picture controls – picture mode (contrast, brightness, sharpness, colour, hue)
colour temperature, room lighting
13
13
13
14
15
Analogue sleep timer
On-screen information
Digital programme guide and setting digital programme timer
Digital parental controls – setting the pin, mode
Digital settings – favourite programmes, locked programmes, encrypted programmes
Digital settings - country and language, audio languages
Digital settings continued – subtitles, audio output reset tv, common interface, local time settings
Digital settings continued – version, auto upgrade and search for new software
Analogue sound controls – volume, sound mute, equalizer, balance, AVL, effect,
line out, headphone volume
16
16
17
18
19
20
21
22
23
Input selection and AV connections – input and output sockets for connected equipment
PC Mode
PC Input Typical Display Modes
24
25
26
TEXT SERVICES
Digital text services
Analogue text
27
27
PROBLEM SOLVING
Questions and Answers – answers to some of the more common queries
Notes – for your own records
28
30
INFORMATION
Specifications and Accessories – technical information about the television,
supplied accessories
19W330DG
Declarations
32
33
English - 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like any electrical
equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for
your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may
not apply to the goods you have just purchased.
Air Circulation
Do not
Leave more than 10cm clearance around the television to
allow adequate ventilation. This will prevent overheating
and possible damage to the television. Dusty places should
also be avoided.
DON’T remove any fixed cover as this may expose dan-
gerous voltages.
DON’T obstruct the ventilation openings of the equipment
with items such as newspapers, tablecloths, curtains, etc.
Overheating will cause damage and shorten the life of the
equipment.
Heat Damage
Damage may occur if the television is left in direct sunlight
or near a heater. Avoid places subject to extremely high
temperatures or humidity, or locations where the tempera-
ture is likely to fall below 5°C (41°F).
DON’T allow electrical equipment to be exposed to dripping
or splashing or objects filled with liquids, such as vases, to
be placed on the equipment.
DON’T place hot objects or naked flame sources, such as
lighted candles or nightlights on, or close to equipment.
High temperatures can melt plastic and lead to fires.
Mains Supply
DON’T use makeshift stands and NEVER fix legs with
wood screws. To ensure complete safety, always fit the
manufacturers’ approved stand, bracket or legs with the
fixings provided according to the instructions.
IMPORTANT: The TV set is designed to operate on 12 V
DC. For this, an adaptor is used which gives 12 V
voltage. Connect this adaptor to a system that sup-
plies 230 V AC 50Hz.
DON’T leave equipment switched on when it is unattended,
unless it is specifically stated that it is designed for unat-
tended operation or has a standby mode. Switch off by
withdrawing the plug, make sure your family know how to do
this. Special arrangements may need to be made for people
with disabilities.
WARNING: Only connect the adaptor supplied with
this product.
Important Note; before use, please check that the low
voltage DC rating on the adaptor corresponds to the
DC voltage rating on the back cover of the LCD TV. If
not the same or in doubt, please contact your Toshiba
dealer or a competent electrician.
DON’T continue to operate the equipment if you are in any
doubt about it working normally, or it is damaged in any way
- switch off, withdraw the mains plug and consult your
dealer.
WARNING - excessive sound pressure from earphones or
headphones can cause hearing loss.
DO ensure that the television is not standing on the mains
lead. DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter, the
removal of which will impair its performance. It should only
be replaced by a correctly rated and approved type and the
fuse cover must be refitted. This set requires an earthed
supply. IF IN DOUBT PLEASE CONSULT A COMPETENT
ELECTRICIAN.
ABOVE ALL - NEVER let anyone, especially children,
push or hit the screen, push anything into holes, slots
or any other openings in the case.
NEVER guess or take chances with electrical equip-
ment of any kind - it is better to be safe than sorry.
THE MAINS PLUG IS USED AS A DISCONNECTING DE-
VICE AND THEREFORE SHOULD BE READILY OPER-
ABLE.
Do
WARNING - The power adaptor may become hot dur-
ing normal operation. This is not a malfunction. Please
make sure that the adaptor is not covered.
DO read the operating instructions before you attempt to
use the equipment.
DO ensure that allelectrical connections (including the mains
plug, extension leads and interconnections between pieces
of equipment) are properly made and in accordance with the
manufacturers’ instructions. Switch off and withdraw the
mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
English - 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and important information
Where to install
Locate the television away from direct sunlight and strong lights; soft,
indirect lighting is recommended for comfortable viewing. Use curtains
or blinds to prevent direct sunlight falling on the screen.
Place on a sturdy platform, the mounting surface should be flat and
steady. It must then be secured to the wall with a sturdy tie using
the clip on the back of the television, this will prevent it from
falling over.
Make sure the television is located in a position where it cannot be
pushed or hit by objects and that small items cannot be inserted into
slots or openings in the case.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i)
fire;
ii)
earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set
out in the owner’s manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used
simultaneously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage
including but not limited to the following, loss of profit, interruption of business, the loss of recorded data
whether caused during normal operation or misuse of the product.
Note: A Toshiba wall bracket or stand, where available, must be used. If a non Toshiba wall bracket or stand
is used the products' BEAB approval will become void and the equipment is then used at the consumers own
risk.
If stationary images generated by text services, channel identification logos, computer displays, video games, on screen
menus, etc. are left on the television screen for any length of time they could become conspicuous, it is always advisable
to reduce both the brightness and contrast settings.
English - 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
The remote control
Simple at-a-glance reference of your remote control.
Standby mode
To mute the sound
To select TV programme number
To select between analogue and digital TV,
or an external source
To return to the previous programme
in TV mode.
No function
To display the digital on-screen Programme Guide
BACK
GUIDE
MENU
EXIT
To exit Menus
On-screen menus
When using menus the direction buttons
move the cursor on the screen up,
down, left or right. OK to confirm your
selection
To change programme positions and
teletext pages
To alter the volume
Select to control your
Toshiba TV, DVD or VCR
To display on-screen information
To call up text services in analogue mode and
interactive services in digital mode.
TEXT
Selectable picture mode
Picture format
SUBTITLE
When in TV mode:
Still picture
Stereo / bilingual transmissions
SUBTITLE
Digital Subtitles
Time display in analogue mode
When using a Toshiba VCR or DVD :
When using the Programme Guide
press
press
press
press
press
press
press
press
to PAUSE/STEP
to PLAY
to REWIND
to FAST FORWARD
to EJECT
to STOP
-2 hours
+2 hours
-24 hours
+24 hours
CT-8003
to SKIP-REWIND
to SKIP-FORWARD
Inserting batteries and effective range of the remote
Remove the back cover to reveal the battery compartment and make sure the
batteries are inserted the right way round. Suitable battery types for this remote are
AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types. Remove dead
batteries immediately to prevent acid from leaking into the battery compartment.
Dispose of them in a designated disposal area.
Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or
the like.
The performance of the remote control will deteriorate beyond a distance of five
metres or outside an angle of 30 degrees from the centre of the television. If the
operating range becomes reduced the batteries may need replacing.
English - 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external equipment
Before connecting any external equipment, disconnect from the main power.
English - 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external equipment
continued,
Connecting the PC via PC input
Aerial cables:
• Power off both computer and TV before making any con-
nections.
Connect the aerial to the socket on the rear of the televi-
sion. If you use a decoder and/or a media recorder it is
essential that the aerial cable is connected through the
decoder and/or through the media recorder to the televi-
sion.
• Connect the PC cable to the PC input of your TV and to the
15-pin connector on the rear of your computer.
• Tighten the screws on the plugs until the connectors are
fastened securely.
SCARTleads:
• For PC sound, use stereo jack socket located at the rear
side of the TV.
Connect the media recorder IN/OUT socket to the televi-
sion. Connect the decoder TV socket to the television.
Connect the media recorder SAT socket to the decoder
MEDIA RECORDER socket.
High Definition
Your TV is capable of displaying High Definition pictures
from devices such as a High Definition Satellite Receiver
or DVD Player. These devices must be connected via the
HDMI socket or YPbPr (Component) sockets. These sock-
ets can accept either 720p or 1080i signals.
Before runningAPS (AUTO PROGRAMMINGSYSTEM)put
your decoder and media recorder to Standby.
A wide variety of external equipment can be connected to
the back of the television, therefore the relevant owners
manuals for all additional equipment must be referred to.
If connecting S-VIDEO equipment, set the INPUT for
S-Video. See page 24.
PLEASENOTE:
• Although this television is able to connect to HDMI equip-
ment, it is possible that some equipment may not operate
correctly.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
• HDMI cables should be less than 5m.
equipment, press
to select between TV, EXT1, S-
• It is recommended that approved HDMI cables up to 5m
long is used. If the unit has DVI output, a special conver-
sion cable from DVI to HDMI will be required.
Video, PC, YPBPR, DTV or HDMI.
HDMI, the HDMI logo, and High Definition Multi Media Inter-
face are trade marks, or registered trade marks of HDMI
licensing, LLC.
English - 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and controls
Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the
top of the television may be used for some functions.
VOLUME
UP / DOWN
PROGRAMME
UP / DOWN
POWER
ON/OFF
TV/AV
MENU
MENU
TV/AV
P/CH
HEADPHONE
JACK
LED
Blue = Standby
Switching on
Using the controls and connections
If the standby LED is unlit, connect the mains plug to
the mains outlet. Press the Power button to switch the
television into standby. The blue LED will light.
Using the control buttons on the top of the TV:
• To alter the volume press
.
• To alter the programme position press
of the TV.
on the top
To view the television, press
or any of the number
buttons on the remote control, or the P+ / P- buttons on
the TV. The blue LED will turn off and the picture will
appear after a few seconds.
• Press MENU and
and
to control the
menu options.
• Press MENU to finish.
To put the television into standby, press
remote control, the blue LED will light.
on the
When connecting mono sound equipment to EXT2 (BACK-
AV), connect the audio output of the equipment to the L or
Using the remote control
R socket on the television, then press
I for the left mono, Dual II for the right mono, or stereo for
mono through both left and right speakers.
select Dual
Press the MENU button on the remote control to see the
menus.
In TV mode the menu appears as a group of icons each
for a menu option. Press the Up or Down button to
select a topic.
To select the Input, press
until EXT2 is highlighted in
SOURCE menu as described on page 23. The television
will automatically sense the type of signal.
To use the options press the Right or OK buttons on the
remote control to select. Use the Up and Down buttons
to select the required choice. Follow the on screen in-
structions. The functions of each menu are described in
detail throughout the manual.
Please always refer to the owner’s manual of the equipment
to be connected for full details.
English - 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Tuning
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the
aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4.
You must allow the television to complete the search.
Connect the mains plug and switch the TV into standby
using the top Power button. Press any numbered or
standby button on the remote control, the Local Op-
When the search is complete the Auto tuning screen will
display the total number of services found.
tions screen will appear. This screen will appear the
first time that the television is switched on and each
time the television is reset.
DTV AUTO TUNING
22
9
LOCAL OPTIONS
Select your Country by using
or
buttons. Use
to move down through the list.
Use
or
to move through the list to select a
programme then press OK to view.
Set your Language and Audio Language out of the
options available.
You can also set Subtitles OFF, as well as specifying
the subtitle language.
When completed, press OK to start tuning.
After auto-tuning has completed, you may find the
time is not correct. In this case, you can adjust the
time by using
and
buttons to highlight Local
Time Setting, and
and
buttons to set the correct
time.
The Auto tuning screen will appear and the televisionwill
start to search for available stations.
The progress bar will move along the line.
DTV AUTO TUNING
English - 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital programme sorting,
auto tuning, manual tuning
Programme sorting
Auto tuning
Auto tuning will completely re-tune the television. All cur-
rent programmesorting andsettings,i.e. favourites and locked
programmes, will be lost.
The station order may be changed, for instance if the
picture is unclear or the signal is weak. Press MENU,
the SETUP MENU will appear on the screen.
Select the SETUP MENU and use
Auto tuning. Press OK.
to highlight the
Use
to move down through the list and highlight
Programmes. Press OK.
A screen will appear warning that previous digital
programmes and settings will be deleted.
Press OK to continue with the Auto tuning.
SETUP MENU
WARNING
TV Setup
ENTER
ENTER
ENTER
!
All previous digital programmes and
settings will be deleted.
Continue?
Local Options
Auto tuning
Manual tuning
Programmes
ENTER
ENTER
YES
Select
Cancel
Watch TV
Back
The television will start to search for all available
stations.You must allow the television to complete the
search. When the search is complete the Auto tuning
screen will display the total number of services found.
With the list of stations now showing use
or
to
.
highlight the station you want to move and press
The selected station will be moved to the right of the
screen.
Manual tuning
The feature is available for service engineers or can be
used for direct channel entry if the multiplex channel is
known.
Select Manual Tuning from the SETUP MENU and
press OK.
Enter the multiplex number using the number buttons.
The television will automatically search for that multi-
plex.
When the multiplex is found any channels not currently
on the programme list will be added and the programme
information at the top of the screen will be updated.
Repeat as necessary. Press EXIT to finish.
Note: Press
to select between TV/DTV.
Use
or
to move through the list to your
preferred position. As you do so the other stations will
move to make room.
Press
to store your move.
Repeat as necessary, then press EXIT.
English - 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Analogue Tuning and programme sorting
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the
aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on page 4.
You must allow the television to complete the search.
When TV (Analogue TV) is selected for the first time;
the A.P.S. screen will appear.
When the search is complete the television will automati-
cally select programme position 1. This may not be a clear
picture or the signal may be weak, so the station order can
be changed using program table which will appear on the
screen.
P01
Program Table
P01 BBC 1
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P02
P03
P04
P05
P06
P07
P08
P09
P10
C
04
Auto. Programming System
Language
Country
Teletext region
English
UK
West Europe
Check the antenna cable
Start: Ok
Exit: Exit
Move
A.P.S
Delete
Name
Use the Up or Down button to highlight the Language,
Country and Teletext region items. Press the Left or
Right button to adjust the highlighted item. Then press
the OK button to start tuning.
Exit: Exit
The television will start to search for available stations.
With the list of stations now showing use the Up or
Down button to highlight the station you want to move
and press the GREEN button.
Use the Up or Down button to move through the list to
the preferred position, as you do so the other stations
will move to make room, then press the GREEN button
again. The selected station will be moved to the new
position.
Repeat as necessary, then press EXIT.
If the television cannot be connected to a media re-
corder/decoder with a SCART lead or if a station on
another system is required, a programme position can
be manually tuned in (see page 11).
Auto. Programming System
APS is running: 78%
Exit: Exit
English - 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Analogue manual tuning
The television can be tuned-in manually using INSTALL. For example: if the television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in a station on another System.
Manual tuning
To allocate a programme position on the television for a
decoder and media recorder: turn the decoder on, insert a
pre-recorded film into the media recorder and press PLAY,
then manually tune.
Press MENU and using the Up or Down button select
INSTALL menu. By pressing Up or Down button, select
Programming option and press Right button.
Using the Down button select Programme and key in
the programme position to be tuned with the number
buttons, we suggest Programme 0for a media recorder.
PROGRAMMING
Programme
Band
Channel
4
S
30
Standard
Colour System
BG
PAL
Back: Menu
Exit: Exit
Use the Down button to select Search then press the
Left or Right button to search. The television will begin
searching for channels.
Each signal will show on the television, if it is not your
media recorder press the Left or Right button to restart
the search.
When your media recorder signal is found, save the
selection by pressing the Down button until Store is
highlighted, then press the Left/Right or OK button to
save.
Repeat for each programme position to be tuned then
press EXIT to finish.
Note: Press
to select between TV or DTV.
English - 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Analogue APS, choosing a language
APS (AUTOMATICPROGRAMMING
SYSTEM)
When the APS (AUTOMATIC PROGRAMMING SYSTEM)
feature is selected all channels and settings will be lost, the
television will return to factory settings and then re-tune.
Press MENU and using the Up or Down button select
INSTALL menu. By using Up or Down buttons, select
PROGRAM TABLE and press Right button.
Auto. Programming System
APS is running: 78%
P01
Program Table
P01 BBC
1
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
Exit: Exit
P02
P03
P04
P05
P06
P07
P08
P09
P10
C
04
You must allow the television to complete the
search.
When the search is complete the television will automati-
cally select programme position 1. This may not be a clear
picture or the signal may be weak, so the station order can
be changed using program table which will appear on the
screen. Instructions for use can be found on page 10.
Move
A.P.S
Delete
Name
Press EXIT to finish.
Exit: Exit
The PROGRAM screen will appear on the screen. Press
the BLUE button to select APS.
Choosing a language
The Language feature allows the menus to be shown in a
variety of languages.
Press MENU and using the Up or Down buttons,
select the Feature menu.
Press the Down button to highlight Language, then
use the Left or Right button to select the required
language.
Auto. Programming System
Country
UK
All prestored programs
will be deleted
Start: Ok
Exit: Exit
Back: Menu
Press the Left or Right button to set the country.
FEATURES
Press the MENU button to cancel APS or the OK but-
ton to start.
Sleep Timer
Language
Off
English
Off
Gray
Off
Child Lock
Menu Colour
Favorite Mode
Back:Menu
Exit: Exit
English - 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Analogue general controls, time display, stereo/
bilingual transmissions, child lock
Selecting programme positions
Analogue TV menus will appear on the screen. Press
Up or Down button select the FEATURES menu. Press
the Down button to choose Child Lock and press the
Left or Right button to turn it on or off.
To select a programme position use the numbered buttons
on the remote control.Programme positions can also be
selected using
and
buttons on the remote control
and the top of the TV. Press
to display the on-screen
information i.e. programme position, stereo/mono signal
and picture format.To revert to the previous programme
position press
.
The Time Display
The time display facility allows the current (text service) time
to be seen on the television screen.
FEATURES
Press
whilst watching a normal television broad-
Sleep Timer
Language
Child Lock
Off
English
Off
cast to see a time display from the broadcaster.
Menu Colour
Favorite Mode
Opaque
Off
Stereo and Bilingual transmissions
Back:Menu
Exit: TV
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a few
seconds. If the broadcast is not in stereo the word Mono
will appear.
When Child Lock is selected, a reminder will appear
when any of the top buttons are pressed. Once the
television has been switched off it can ONLYbe brought
out of standby using the remote control.
Stereo... Press
to select Stereo or
Mono.Bilingual... Bilingual transmissions are rare. If they
are transmitted the word Dual will display. Choose the re-
quired programme number and if the word Dual appears
press
to select Dual 1 or Dual 2.
In digital mode, a list of languages and audio formats may
be shown briefly (mono, stereo, multi-channel). Use the
button to select between them.
Child lock
CHILD LOCK disables the buttons on the top of the televi-
sion. All buttons on the remote control can still be used.
SETUP MENU
TV Setup
OK
OK
OK
OK
OK
Local Options
Auto tuning
Manual tuning
Programmes
Back
Watch TV
English - 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture format
Depending on the type of broadcast being transmitted, programmes can be viewed in different formats.Press
the
button repeatedly to select between Auto, Wide and 4:3.
When Auto is selected the format being displayed is determined by the picture being broadcast.
Use this setting when watching a 16:9
WIDE
broadcast
.
Use this setting to view a true 4:3
broadcast
4:3
.
Using the special functions to change the size of the displayed image (i.e. changing the height / width ratio) for the purposes
of public display or commercial gain may infringe on copyright laws.
English - 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Analogue Picture controls — picture mode, hue,
colour temperature, room lighting
Picture mode
This television offers the choice of personalising the picture
style.Press
to view the different styles available:
MANUAL, BRIGHT, STANDARD andSOFT.
Select the PICTURE option from the main menu.
PICTURE
Picture Mode
Bright
Brightness
Contrast
Colour
Hue
Back:Menu
Exit: Exit
PICTURE
Colour Temperature
Picture Mode
Bright
Brightness
Contrast
Colour
Colour Temperature increases the ‘warmth’ or ‘coolness’
of a picture by increasing the red or blue tint.
Sharpness
Back:Menu
Exit: Exit
In the PICTURE menu press the Down button until
Colour Temp is highlighted.
Press the Down button to highlight Picture Mode and
then Right button to select a picture style.
Press the Left and Right buttons to select between
NORMAL, WARM and COOL to suit your preference.
When using Manual picture mode, use the Up and
Room Lighting
Down buttons to select Contrast, Brightness, Sharp-
ness and Colour, then Left and Right buttons to
adjust to suit personal taste.
Room Lighting adjusts the screen lighting according to
your selection.
Press the Down button and select Reset to reset the
In the PICTURE menu press the Down button until
adjustments to factory default settings.
Room Lighting is highlighted.
Hue
Press the Left and Right buttons to select between
Bright, Movie or Normal. The differences may not
always be noticeable.
This item is displayed in PICTURE menu when the TV re-
ceives an NTSC signal.
In the PICTURE menu press the Down button until Hue
is highlighted.
Press the Left and Right buttons to adjust Hue to suit
your preference.
English - 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Timers
On-screen information
Whenviewingindigitalmodetheon-screeninformationandguide
give access to programme details for all available channels.
Sleep timer - analogue
Information
The television can be set to turn itself OFF after a certain
time.
Select information by pressing
screen will appear giving details of the channel and
programme currently being viewed.
, the information
Press MENU and
or
to select Features. Then
press or OK to enter the menu.
13.45 Sat, 21Aug.
14:00 Olympic Grand...
BBC ONE
13:35 Boxing Olumpic...
To set the number of minutes in which the television will
BBC TWO
014 minutes left
...Grantstand
CBBC Channel
BBC THREE
BBC FOUR
Quarter final places are at
turn off press or . This will increase or decrease in
steps of 10 minutes.
Stake in the Fleyweight and Middleweight divisions.
Newsround starting in 9minutes on CBBCChannel
Showing also
Page Up
Showing also
Language
Page Down
To see details of any of the other channels currently
available, press or to scroll up/down the list.
As the channel is selected details of the programme
currently being broadcast will appear.
FEATURES
Sleep Timer
Off
Language
Child Lock
English
Off
Menu Colour
Favorite Mode
Gray
Off
Back:Menu
Exit: Exit
English - 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital programme guide and
setting digital programme timer
Guide
Programme timer - digital only
This feature will set the television to go to a specific channel
atacertaintime. Itcan be used to viewaparticularprogramme,
or by setting the mode to daily or weekly, can be used to
view a series of programmes.
Select the on-screen guide by pressing GUIDE, the
guidescreenwillappearhighlightingdetailsofthechannel
and programme currently being viewed.
This may take a few moments to appear.
Press MENU and or to select the TIMER MENU.
10.03 Mon, 30 Sep.
Monday
11:00
ALL PROGS
10:00
10:30
11:30
BBC ONE
City Hospital
Olympic Grandstand
Barg
Wildlife on
Teletubbies
Trisha
The Daily P
Frasier
BBC TWO
ITV 1
This Morning
CHANNEL 4
Five
The Big Circus
The Wright Stuff
TIMER MENU
Brainteaser
Programme timers
ENTER
ITV 2
Judge Judy
Sally Jessy Raphael
BBC THREE
Teletext
This is BBC THREE
BBC FOUR
Sky travel
This is BBC FOUR
Spanish Package Deals
Floyd on
Horizon
Canary Isla
UKTV History
E4
Time Flyers
Time Flyers
Big Brother Live
Record
More Info
Page Down
Watch TV
Timers
Page Up
Back
Watch TV
Change progs
Press
or
for information of other programmes
Press
to select Programme timers, then press
scheduled for the channel selected.
OK to select.
For details of other channels currently available, press
Press
to select the first programme to be timed,
or
to scroll up and down the channel list. As the
then press OK. The SET TIMER menu will now appear
channel is selected details of the programme currently
on the screen.
being broadcast will appear, then press or
.
Press
and
to go through the list adding the
details of the programme to be timed by using the
Press the
button for more information about the
currently highlighted programme.
number buttons and or to make selections.
Press EXIT button to return to original programme.
5
SET TIMER
Programme
Date
BBC FOUR
10
Sat, 21 Aug .
21/08
13.45
14.45
Start T ime
End Time
Repeat
ONCE
NONE
Subtitles
When all of the details have been entered press OK to
5
save the timer.
PLEASE NOTE: When a timed programme is about to start,
an information screen will appear offering the option of
watching orcancelling the programme. The menus and other
channels will not be available during the timed programme
unless the programme timer is cancelled.
English - 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital parental controls - setting the pin, mode
There are a number of parental controls which can block specific channels being viewed, and which can only be accessed
with a security PIN code when in digital mode.
Once you’ve entered the PIN code, you do not need to enter it again until next time you power-on TV. To restore PIN code
entry again (e.g. for parental controls on locked programmes) press STANDBY twice.
Setting the PIN
Mode
This feature locks various menus to prevent the television
being retuned or the settings being overridden.
Press MENU and to select FEATURE MENU.
Inthe PARENTALCONTROLmenu press
to select
Mode.
FEATURE MENU
PARENTAL CONTROL
Parental Control
OK
OK
Mode
OFF
Favourite and Locked Programmes
Favourites
Change Pin
OK
ALL PROGS
Back
Watch TV
Common Interface Slot
Software Upgrade
OK
Use
or
to choose between ON, OFF, LOCK
MENU and LOCK INSTALL.
Back
Watch TV
When menus that have been locked are now selected,
they will only become available when the PIN is en-
tered.
Use
to select Parental Control then press OK.
ON: Parental control settings are enabled (PIN code is
required for programme locks and cencorship).
Press
to highlight Change Pin then press OK.
LOCK INSTALL: As ON mode above, except that installa-
tion features such as auto-tuning and programme sorting
are also locked (PIN code is required).
PARENTAL CONTROL
OFF
Mode
LOCK MENU: As ON mode, except all menu functions are
locked (PIN code is required).
OK
Change Pin
OFF: All lock settings are disabled (no PIN code is re-
quired).
Back
Watch TV
Using the number buttons enter a four digit number,
when these have been entered the screen will ask you
to confirm them by entering them again.
DEFINE PIN NUMBER
– –
– –
New PIN
Confirm PIN
Exit
Press MENU to go back to the Parental Control screen.
The PIN number is now set.
English - 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital settings - favourite programmes,
locked programmes, encrypted programmes
Selecting Favourite Programmes
Locking Programmes
Favourite Programmes creates a list of the digital chan-
nels that are watched most. Four lists can be created, this
can be a mixture of television, text and radio channels.
Locked programmes stops the viewing of selected digi-
tal channels,which can only be accessed by entering the
PIN.
From the FEATURE MENU press
to select
From the FEATURE MENU press
to select
Favourite and Locked Programmes and press OK.
Favourite and Locked Programmes.
FAVOURITE AND LOCKED PROGRAMMES
repeatedly to select the Locked Programme
Press
list.
Use
or
to go through the list of channels
pressing OK to select the required, a padlock will ap-
pear in the box.
FAVOURITE AND LOCKED PROGRAMMES
Use
or
to go through the list of channels
pressing OK to select the ones required, a tick will
appear in the box.
Press to select List 2. Follow the same procedure to
make the selection. When all favourites have been
selected press MENUto return to the FEATUREmenu.
Use
to highlight Favourites and or to select
Press EXIT to finish.
between TV, RADIO, FAV-1, FAV-2, FAV-3,FAV-4,ALL
PROGS. The number of favourites available depends
on how many lists have been created.
When any of the channels in the Locked Programme
list are now selected the PIN must be entered before
they can be accessed.
The lock only functions after the set is returned to
standby and switched out of standby again.
FEATURE MENU
Encrypted Programmes
OK
OK
Parental Control
Selecting Encrypted Programmes allows all encrypted
programmes to be shown in the programme list even if they
are not available to select.
Favourite and Lock ed Programmes
Favourites
ALL PROGS
Common Interface Slot
Software Upgrade
In the FEATURE MENU press
Encrypted Programmes.
or
to select
OK
Back
Watch TV
Use or to select ON or OFF.
Press EXIT.
Using the
P
buttons will only access those
channels in Favourite List 1 when FAV-1 is selected.
English - 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital settings
continued
- country, language
and audio languages
Country
Language
This feature allows you to select a country option for the
APS installation process.
This feature will define the Menu language selection.
From the LOCAL OPTIONS menu press
to select
From the SETUP MENU press
to select LOCAL
Language item.
OPTIONS.
LOCAL OPTIONS
SETUP MENU
TV Setup
OK
OK
Local Options
Auto tuning
Manual tuning
Programmes
OK
OK
OK
13.39
Back
Watch TV
Back
Watch TV
Use or to set your language.
Audio Languages
Press OK, then use
or
to highlight the Coun-
try.
This feature allows a programme or film to be viewed with a
choice of soundtrack language, provided they are currently
being broadcast.
Use
or
to set your country.There are six
options to select.
From the SETUP MENU press
OPTIONS.
to select LOCAL
LOCAL OPTIONS
SETUP MENU
TV Setup
OK
OK
OK
OK
OK
Local Options
13.39
Auto tuning
Back
Watch TV
Manual tuning
Programmes
Back
Watch TV
or
Press OK, then use
to highlight the Audio
Language.
Use or
to select Audio Language.
English - 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital settings
continued
- audio languages, subtitles,
audio output, reset tv, common interface, local time
settings
Reset TV
LOCAL OPTIONS
Selecting Reset TV will delete all stored digital and ana-
logue channels and settings. The television will return to
factory settings and then auto tune.
Press MENU and then press
until Reset TV is
highlighted.
13.39
Press OK to select. A screen will appear warning that all
previous settings will be deleting, press OK to con-
Back
Watch TV
tinue.
The digital welcome screen will appear, press OK to
continue, the television will then auto tune.
Note: If more than one sountrack is available, use
button to select between them. This option is
dependent on transmission received.
Retune also analogue channels as described on page 11.
Common Interface
Subtitles
The Common Interface Slot, situated on the back of the
television, enables the insertion of a CAM (Conditional Ac-
cess Module) and card. These are purchased from a service
provider and allow additional Pay per View broadcasts to be
viewed.
This feature will show subtitles on the bottom of the screen
in the selected language provided they are being broadcast.
From the LOCAL OPTIONS menu press
to select
Subtitles.
Insert the CAM and card into the Common Interface
slot, following the instructions provided with the CAM.
A box will appear on screen to confirm that the CAM is
loaded.
Use or to make a selection.
Local Time Setting
From the FEATURE MENU press
Common Interface Slot.
or
to select
From the LOCAL OPTIONS menu press
select Local Time Setting.
to
To adjust Local Time Setting, use or buttons.
Audio Output(Digital Coaxial)
FEATURE MENU
Favourite and Lock ed Programmes
Favourites
ENTER
ALL
From the LOCAL OPTIONS menu press
Audio Output.
to select
Common Interface Slot
Software Upgrade
Use or to set Audio Output to PCM or Bitstream.
This is dependent on transmission received.
ENTER
OFF
Encrypted Programmes
NOTE: When Bitstream is selected, main TV speakers
will be muted and changing channels will revert the set
back to the Audio Output selection set in Local Op-
tions.
Back
Watch TV
Details of the CAM should now be available. Use OK to
select it.
English - 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital settings
continued
- version, auto upgrade and
searching for new software
Version
Searching for new software
This feature can be used to check the version of software
currently installed.
If prefered, software upgrades can be searched for manu-
ally using Search For New Software.
From the FEATURE MENU press
to select Soft-
In the SOFTWARE UPGRADE menu press
or
ware Upgrade.
to select Search For New Software.
SOFTWARE UPGRADE
Version
1.14
OFF
Auto upgrade
FEATURE MENU
Favourite and Lock ed Programmes
Favourites
Search for New Software
ENTER
ENTER
ALL
Back
Watch TV
Common Interface Slot
Software Upgrade
ENTER
OFF
Press OK. The television will automaticallystart search-
ing for a software upgrade, the progress bar will move
along the line.
Encrypted Programmes
Back
Watch TV
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for
this TV.
Press
or
to select Version. Use
or
to
select. When the software has been updated there will
be a choice of two versions available. Press OK to
select.
Searching
Stop
SOFTWARE UPGRADE
If an upgrade is found the television will automatically
start downloading, if not a screen will appear stating
that an upgrade is unavailable.
Version
1.14
ON
Auto upgrade
Search for New Software
ENTER
NO UPGRADEAVAILABLE
Back
Watch TV
There is no upgrade available
at this time.
!
Auto Upgrade
Continue
If Auto upgrade is selected the software will automatically
update as each version becomes available, provided the
television is on or in standby. If the television is on, a
screen prompt will appear showing the software download
taking place.
This can take several minutes.
From the SOFTWARE UPGRADE menu press
to
select Auto Upgrade.
Use or to select ON or OFF.
English - 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Analogue sound controls — volume, sound mute,
equalizer, balance, AVL, effect, line out,
headphone volume
Sound Controls
Sound Balance
Volume
Press the Right button to select the SOUND option
from the main menu.
Press
or
on the remote control or using the top
buttons on the TV to adjust the volume.
Press the Down button to highlight Balance and Left or
Sound Mute
Right button to adjust the settings. Press OK to store
the settings.
Press
on the remote control once to turn the sound off
and again to cancel.
Press EXIT to finish.
Equalizer
AVL -Auto Volume Limiter
The Equalizer feature has a number of sound settings to
select from; Flat, Speech, Music, Personal and Jazz.These
settings are all preset and cannot be altered. The Personal
setting can be altered and stored to suit personal preference.
AVL limits high volume levels and prevents the extreme
changesinvolumethatcanoccur whenchannelsarechanged
or a programme switches to a commercial.
IntheSOUNDmenupress theDownbuttonto highlightAVL.
Select the SOUND option from the main menu.
Use the Left or Right button to turn AVL on or off.
Press OK to store the settings.
Effect
Effect creates a synthetic sound effect for movies and
television shows recorded in mono.
SOUND
Volume
In the SOUND menu press the Down button to high-
light Effect.
Balance
0
Sound Mode
AVL
Effect
Stereo
On
Off
Use the Left or Right button to turn Effect on or off.
Press OK to store the settings.
Back:Menu
Exit: Exit
Line Out
Use the Down button to highlight Equalizer then press
the Right button to select mode.
In the SOUND menu press the Down button to highlight
Line-out.
Use the Left or Right button to turn Line-out on or off.
Press OK to store the settings.
Headphone Volume
Equalizer
Mode
120 Hz
Flat
In the SOUND menu press the Down button to highlight
HP Volume.
0
0
0
0
500 Hz
1.5 kHz
5 kHz
Use the Left or Right button to adjust HP Volume.
Press OK to store the settings.
Back:Menu
Exit: Exit
Using the Up and Down buttons select a frequency and
then Left and Right buttons to adjust to suit personal
taste. Press OK to store the settings.
Press EXIT to return to TV.
English - 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Input selection, AV connections
Settings for the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 5 and 6
for a clear view of the back connection recommendations and page 7 for the side connections.
Input selection
Use the Input Selection if the television does not switch
over automatically.
Press the external source selection button
lect an input from the menu displayed.
to se-
SOURCE
TV
EXT1
S-Video
PC
YPBPR
DTV
HDMI
Available source options are; TV, EXT1, S-Video,
PC, YPBPR, DTV or HDMI.
Press the
button on the remote control, or the TV/
AV button on the TV until the required input is high-
lighted. Either wait or press OK to select.
English - 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Mode
PC Picture Position and PC Picture menus are described below. The other menu items are identical to TV mode menus.
Please see the previous sections. For connections please refer to page 5.
Autoposition
Clock
If you shift the picture horizontally or vertically to an un-
wanted position, use this item to put the picture into correct
place automatically.
Clock adjustment corrects interference that appear as ver-
tical bandingin dot intensive presentations likespreadsheets
or paragraphs or text in smaller fonts.
Select the GEOMETRY option from the main menu.
In the GEOMETRY menu press the Down button until
Dot Clock is highlighted.
Press the Left or Right button to adjust the value.
Phase
Depending on the resolution and scan frequency that you
input to the TV Set, you may see a hazy or noisy picture on
the screen. In such a case you can use this item to get a
clear picture by trial and error method.
In the GEOMETRY menu press the Down button until
GEOMETRY
Phase is highlighted.
H. position
V. position
Clock
Press the Left or Right button to adjust the value.
Phase
Auto Adjustment
PC Picture controls
Back:Menu
Exit: Exit
Press the Down button to highlight Autoposition and
then press the Right button.
H Position
H (Horizontal) Position shifts the image horizontally to
right hand side or left hand side of the screen.
In the GEOMETRY menu press the Down button until H
Position is highlighted.
PICTURE
Brightness
Contrast
Press the Left or Right button to adjust the value.
Colour Temp
Store
Warm
V Position
Back:Menu
Exit: Exit
V (Vertical) Position shifts the image vertically towards the
top or bottom of the screen.
Brightness, Contrast and Colour Temperature adjust-
ments in this menu are identical to adjustments defined in
TV picture menu.
In the GEOMETRY menu press the Down button until V
Position is highlighted.
Press the Left or Right button to adjust the value.
English - 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PC input typical display modes
Resolution
Mode
Frequency (Hz)
Horizontal
Vertical
1
2
60
56
60
72
75
72
75
60
70
75
60
60
IBM, VGA
640
800
480
600
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
3
800
600
4
640
640
800
800
480
480
600
600
5
6
7
8
1024
1024
1024
1280
1280
768
768
768
720
768
9
10
11
12
English - 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital and Analogue text services
Digital text
Subtitles are available on page 888.
Four coloured titles will appear at the base of the screen. To
access one of the four given subjects, press the relevant
coloured button on the remote control.
The digital text and interactive services are the up-to-date
way of viewing service information, using computer-style
formats, incorporating pictures and interactive views.
For further information on your particular text system(s),
see the broadcast text index page or, consult your local
Toshiba dealer.
They offer high quality on-screen images with multi-colour
photographic still images, advanced text and graphics and
are user-friendly. These services are free to anyone with a
digital television, however; they are not available for all
digital stations and are dependant on the broadcaster.
Below is a guide to the functions of the remote control text
buttons.
Simply using the coloured buttons on the remote control
To displayan initial page:
and
,
,
and
make navigating pages and pull-
down menus quick and easy.
Press
to access an initial page. The one displayed is
dependant on the broadcaster.
Analogue Text Services
Before using the text services the required language region
must be chosen.
To access sub-pages:
If a text page has sub-pages, press
and enter the
Select Txt. region from the INSTALL menu.
subpage numbers 01,02,03 etc. which can be selected us-
ing RED or GREEN buttons on the remote control. The
subpage selection is displayed at the bottom of the text
page.
Press the Left or Right button to choose the required
language region.
To reveal concealed text:
To discover the solutions on quiz and joke pages press the
button.
To hold a wanted page:
At times it is convenient to hold a page of text. Press
INSTALL
and
will appear in the top left of the screen. The page
Programming
APS
will be held on screen until the button is pressed again.
Txt. region
West Europe
Exit: Exit
Program Table
To enlarge the text display size:
Back: Menu
Press
once to enlarge the top half of the page, press
again to enlarge the bottom half of the page. Press again to
revert to normal size.
After the teletext language is selected, press EXIT.
The Text
button:
To select a page whilst viewing a normal
page:
To view text services press
. Press again to
superimpose text over a normal broadcast picture. Press
again to return to normal viewing. Programmes cannot be
changed until text is cancelled.
Enter the page number then press
ture will be displayed. The television will indicate when the
page is present by displaying the page number at the top of
, a normal pic-
The first text page shown will be the initial page.
Any text page can be accessed by entering the 3 digit page
number using the numbered buttons, pressing the coloured
the screen. Press
to view the page.
buttons or pressing
to advance to the next page and
to go back to the previous page.
English - 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Questions
Answers
and
Below are the a ns w ers to s om e of th e m os t com m on q ueries .For m ore info rm ation, go to w w w .tos hiba.co.uk
W hy do n't the controls o n the to p of the
W hy is there no sound o r picture?
Q
A
Q
A
television w o rk?
C heck the m ains s w itch is o n and check a ll
connections .
C heck th at CHILD LOCK is n ot s electe d.
C heck the te levis ion is not in s tandby m ode.
W hy is the so und only com ing fro m one
speak er w hen stereo sound is selected ?
W hy is there a p icture b ut no so und?
Q
A
Q
A
C heck the volum e has not been turned d ow n o r
th at s ound m ute has not been s electe d.
C heck th at the balance in the SOUND m enu
has n't b een s et to one s ide.
W hy are there p ro b lem s w ith a na log ue text
service?
W hat can ca use a p oo r p icture?
Q
A
Q
A
In te rfe rence or a w eak s ignal. Try a different
te levis ion s ta tion.
Good perfo rm ance of th e analogue text
depends on a g ood s trong broadcas t s ignal.
This n orm ally requires a roof or loft aerial. If th e
te xt is unreadable or garbled, check th e a erial.
Go to the m ain index p age of th e analogue text
s ervice and look for the U ser Guide .
W hy d oesn't the video /DV D being pla yed
sho w o n screen?
W hy is the tim e w rong?
Q
A
Q
A
Make s ure the VC R o r D VD playe r is connecte d
to the televis ion as s how n on page 5 , then
Pleas e check you h ave s electe d the correct
country. Go to the LOCAL OPTIO NS m enu a nd
check the COUNTRY s etting (on page 19 ).
Oth erw is e, you can correct the tim e u s ing the
LOCAL TIM E SETTING (s ee page 20 ).
s elect the correct input by pres s ing
.
W hy is the V C R /DV D picture in b lack and
w hite?
Q
A
Q
A
Q
A
C heck the correct input h as b een chos en,
S-VIDEO o r AV. See AV connections.
W hy is there a g oo d vid eo picture but no
sound ?
C heck the SC AR T lead connection.
W hy d oesn't the rem ote co ntro l w ork ?
C heck the batteries a ren't d ead or ins erte d
incorrectly.
Cleaning the screen and cabinet...
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use
any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Disposal...
The following information is only for EU member states.
The use of the symbol indicates that this product may not be treated as household waste. By
ensuring this product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product, please contact
your local city office, your household waste disposal service or the shop where you purchased the
product.
English - 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Questions Answers
and
Why is the DTV main menu unavailable?
Why is there no digital text service?
Q
A
Q
A
Analogue mode (TV) is selected. Press
select DTV.
to
The digital programme being viewed is not
broadcasting digital text. Tryanother digital
programme.
Why is the digital channel locked?
Why do I have black bars in a 4:3 picture?
Q
A
Q
A
The channel has been selected in the locked
programmes list, see page 19 .
This is normal operation. The bars on the left and
right of picture are generated by the TVset. The
black bars on the top and bottom of the screen
occur during a 16:9 broadcast.
Why can only certain digital channels be viewed?
Q
A
Favourite Mode has been set to On. See page 19 .
Why are some encrypted digital channels
unavailable?
Q
A
Your subscription needs upgrading. Contact your
service provider.
Why is the soundtrack in English when a
different audio language has been selected?
Q
A
The programme is currently being broadcast with
an English soundtrack only.
What can be done if the PIN number has been
forgotten?
Q
A
Use the master pin code of 1276, then change to
a number of your choice.
Ensure that no-one else can use the Master PIN
by removing the Owners manual.
Why when digital subtitles have been selected
are they not showing on the screen?
Q
A
Subtitles are not currently being transmitted by the
broadcaster.
English - 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
For your own records
English - 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
For your own records
English - 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications and accessories
19W330DG
Broadcast Systems / Channels
Programme Positions
100
UHF UK21-UK69
VHF E2-E12, S1-S4
UHF E21-E69
PAL I
Stereo
Nicam, German
2 carrier system
PAL-B/G
VHF E2-E12, S1-S4
Visible Screen Size
SECAM-L UHF F21-F69
VHF F1-F10, B-Q
(approx.)
19" diagonal
16:9
Display
SECAM-D/K UHF R21-R69
VHF R1-R12
Screen Resolution
1440 x 900
2 x 3 R M S
50 W (max)
<1 W
DVB-T Broadcast Systems
Sound Output
(at 10% distortion)
Power Consumption
country
UK
France
Germany
VHF
-
05-12
05-12
05-12
UHF
21-69
21-69
21-69
Standby (approx.)
Italy
excluded 21-69
Spain
Switzerland 05-12
Sweden
Finland
Greece
Austria
-
21-69
21-69
21-69
21-69
21-69
21-69
Dimensions
(approx.)
480mm (W) 352mm (H) 80mm (D) (without stand)
480mm (W) 397mm (H) 175mm (D) (with stand)
05-12
05-12
05-12
05-12
Weight (approx.)
5,5 Kg (with stand)
5,1 Kg (without stand)
Headphone Socket
Accessories
3.5mm stereo
Video Input
PAL, SECAM, NTSC 3.58/4.43
Remote control
2 batteries
External Connections
EXT-1 Input / Output
21-pin Scart
RCA jacks
4-pin
RGB, A/V
Component -Y/Pb/Pr
Audio L+R
S-video
(AAA, IEC R03 1.5V)
P Clip
VGA Cable
EXT-2 Input
SVHS Input
PC Audio Cable
VGA
Input
15-Pin
HDMI Input
HDMI Connection
RCA jacks
Digital Output
(coaxial)
DTV Audio
PCM-AC3
DVB is a registered trade mark of the DVB project.
English - 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DICHIARAZIONE Dl CONFORMITÁ
La Societá
Toshiba Information Systems (U.K.) Limited
Consumer Products Division,
European Service Centre,
Admiralty Way, Camberley, Surrey GU15 3DT.
dichiara che i prodotti Televisori a colori - Toshiba - Modelli
19W330DG, é costruito in conformitá alle prescrizioni del D.M.
n. 548 del28/8/95 p, ubblicato sulla G.U. n. 301 del 28/12/95 ed
in particolare é conforme a quanto indicato nell'art. 2, comma
1, del decreto stesso.
English - 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|