Blu-ray Disc
™
Player
BDX3300KB
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Important
Disposal of your old product and
batteries
Safety and important notice
Following information is only valid for EU-
member States:
Disposal of products
Warning:
•
Risk of overheating! Never install the product in a
confined space. Always leave a space of at least
10cm around the product for ventilation. Ensure
curtains or other objects never cover the
ventilation slots on the product.
Never place the product, remote control or
batteries near naked flames or other heat
sources, including direct sunlight.
Only use this product indoors. Keep this product
away from water, moisture and liquid-filled
objects.
Never place this product on other electrical
equipment.
The crossed out wheeled dust bin symbol
indicates that products must be collected and
disposed of separately from household waste.
Integrated batteries and accumulators can
be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was
placed on the market after August 13, 2005.
By participating in separate collection of
products and batteries, you will help to assure
the proper disposal of products and batteries
and thus help to prevent potential negative
consequences for the environment and human
health.
For more detailed information about the
collection and recycling programmes available
in your country, please visit our website
alternatively please contact your retailer where
the product was purchased.
•
•
•
•
•
Keep away from this product during lightning
storms.
Where the mains plug or an appliance coupler is
used as the disconnect device, the disconnect
device shall remain readily operable.
LASER
CAUTION:
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol
indicates that batteries and/or accumulators
must be collected and disposed of separately
Pb,Hg,Cd from household waste.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION:
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED. DO
NOT STARE INTO BEAM.
If the battery or accumulator contains more
than the specified values of lead (Pb),
mercury (Hg), and/or cadmium (Cd) defined in
the Battery Directive (2006/66/EC), then the
chemical symbols for lead (Pb), mercury (Hg)
and/or cadmium (Cd) will appear below the
crossed out wheeled dust bin symbol.
By participating in separate collection of
batteries, you will help to assure the proper
disposal of products and batteries and
thus help to prevent potential negative
consequences for the environment and
human health.
LOCATION:
INSIDE, NEAR THE DECK MECHANISM.
For more detailed information about the
collection and recycling programmes available
in your country, please visit our website
alternatively please contact your retailer
where the product was purchased.
EU Conformity Statement
This product is marked with "CE" and complies
therefore with the applicable harmonized
European standards listed under the Low
Voltage Directive 2006/95/EC and the EMC
Directive 2004/108/EC. ErP Directive 2009/125/
EC, R&TTE 1999/5/EC
General Information
This appliance may be fitted with a non-
rewireable plug. If it is necessary to change the
fuse in a non-rewireable plug the fuse cover must
be refitted. If the fuse cover is lost or damaged,
the plug must not be used until a replacement
available from the appliance manufacturer is
obtained. If the plug has to be changed because
it is not suitable for your socket, or becomes
damaged, it should be cut off and an appropriate
plug fitted following the wiring instructions below.
The plug removed must be disposed of safely as
it is hazardous if inserted into a live socket.
Responsible for CE-marking is
TOSHIBA INFORMATION SYSTEMS (U.K.) LTD,
Toshiba Court, Weybridge Business Park,
Addlestone Road, Weybridge,Surrey,KT15 2UL,
United Kingdom
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT
Notice for Trademark
The wires in this mains lead are coloured
in accordance with the following code:
BLUE: NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains
lead of this unit may not correspond with
the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire that is coloured blue must be
connected to the terminal in the plug
which is marked with the letter N or
coloured black.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC in the United States and other
countries.
The wire that is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
Do not connect either wire to the earth
terminal which is marked by the letter E or
BONUSVIEW ™
Blu-ray DiscTM, Blu-rayTM, BD-LiveTM,
BONUSVIEWTM, and the logos are
trademarks of the Blu-ray Disc Association.
by the safety earth symbol
green or green-and-yellow.
or coloured
Use a 5A BS1362 fuse which is approved
by ASTA or BSI. Always replace the fuse
cover after changing the fuse.
Copyright notice
This product incorporates copyright
protection technology that is protected by
U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be authorized
by Rovi Corporation, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Rovi
Corporation. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S.
Patent Nos: 5,956,674; 5,974,380;
6,226,616; 6,487,535; 7,392,195;
7,272,567; 7,333,929; 7,212,872 & other
U.S. and worldwide patents issued &
pending. DTS-HD, the Symbol, & DTS-HD
and the Symbol together are registered
trademarks & DTS-HD Master Audio |
Essential is a trademark of DTS, Inc.
Product includes software. © DTS, Inc. All
Rights Reserved.
‘AVCHD’ and the ‘AVCHD’ logo are
trademarks of Panasonic Corporation and
Sony Corporation.
‘DVD Video’ is a trademark of DVD Format/
Logo Licensing Corporation.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Oracle and Java are registered trademarks
of Oracle and/or its affiliates. Other names
may be trademarks of their respective
owners.
“Wi-Fi CERTIFIED” logo is a registered
trademark of Wi-Fi Alliance.
“Wi-Fi PROTECTED SETUP” logo is a
trademark of Wi-Fi Alliance.
DLNA™, DLNA CERTIFIED™ are
trademarks, service marks, or certification
marks of the Digital Living Network
Alliance.
YouTube is a registered trademark of
Google, Inc.
Picasa is a trademark of Google, Inc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Your Product
Blu-ray™ discs that
Region
can be played
Regions Codes
North America,
Central America,
South America,
Korea, Japan, Taiwan,
Hong Kong and
South East Asia.
Both the Blu-ray DiscTM Player and the
discs are coded by region. These regional
codes must match in order to play the disc.
If the codes do not match, the disc will not
play.
The Region Number for this Blu-ray DiscTM
Player is described on the rear panel of the
Blu-ray DiscTM player.
Europe, Greenland,
French territories,
Middle East, Africa,
Australia and
Region
DVD discs that
can be played
New Zealand.
U.S.A. and
Canada regions
ALL
ALL
ALL
ALL
ALL
ALL
1
2
3
4
5
6
India, China, Russia,
Central and
South Asia.
U.K.,
Europe regions and
Japan
Asia Pacific,
Taiwan, Korea
Feature highlights
High-Definition entertainment
Watch high-definition content disc with
HDTV (High Definition Television). Connect
it through a high speed HDMI cable. You
can enjoy excellent picture quality up to
1080p resolution with the frame rate of 24
frames per second with progressive scan
output.
Australia,
New Zealand,
Latin America
Russia and
India regions
BD-LiveTM
Connect this player to the movie studios
website via the LAN jack or Wi-Fi to
access a variety of up-to-date content (e.g.
refreshed previews and exclusive special
features).
China, Calcos Islands,
Walls and Futuna
Islands
Blu-ray DiscTM Java
Blu-ray DiscTM Java(BD-J) Application
The BD-ROM format supports Java for
interactive functions. “BD-J” offers content
providers almost unlimited functionality
when creating interactive BD-ROM titles.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Main Unit
6
1
8
5
4
3
2
7
NO
a
b
c
d
e
f
g
h
Control
Function
USB jack
Connect a USB flash drive.
Turn the power on or restores the unit to the standby mode.
Playback/Pause.
1
B/X
x
Stop play.
Open or close the disc compartment.
Point the remote control at the IR sensor.
Show information about the current status of this unit.
Load a disc into the disc drive.
Z
IR Sensor
Display panel
Disc compartment
1
3
2
4
NO
a
Control
Function
AC power cord
COAXIAL jack
Connect to a standard AC outlet.
b
Output digital audio signals when connecting the coaxial digital cable.
Output video/audio signals to a connected TV, monitor or AV amplifier.
Connect to a TV, monitor or AV amplifier equipped with HDMI input.
c
d
HDMI OUTPUT jack
LAN jack
When not using Wifi, use this to connect to a network with an always-on broadband
connection. It is reserved for future usage of BD-Live™, bonus content, Media
Server Search, Picasa, YouTube, BBC iPlayer and External Control.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
REMOTE SIGNAL EMITTER
• Point remote control to the sensor on
the front panel
OPEN/CLOSE
• Open/ Close the disc tray
Number Buttons
Select numbered items in a menu
Press to enter track/ chapter/ title
numbers/password directly
ON / STANDBY
To switch the Blu-ray Disc™ Player to ON or
standby mode
•
SETUP
Enter or exit the system setup menu
CLEAR
•
To clear an entry or the bookmark and program you set
REPEAT A-B
• To repeat from A to B
REPEAT
•
Select various repeat mode.
MC(Media Center)
To open/close Media Center
GOTO
•
• To goto a title, chapter
,
track or
POP UP/MENU
playing time
•
To display a menu included on many
Blu-ray Disc™/DVD video discs
DISPLAY
• To display a window to locate a title,
OK
chapter or track
/
•
Acknowledge/ Confirm menu selection
Instant replay/instant search
•
Navigation/ Cursor buttons for moving
to the left / right / up / down
during JPEG playback to rotate the
F.R & F.F
Fast reverse/ fast forward
• Press
/
PLAY/PAUSE
• Start/Pause playback
current photo track, but the JPEG playback
PREV & NEXT
will be paused
• Skip to previous/next chapter/ title/track
RETURN
STOP
•
Return to previous menu
• Stop playback
TOP MENU
• To display the disc title during playback
Do a slow forward during normal
playback
•
•
Advance the picture frame by
frame during pause mode
PROGRAM
To access program list.
•
DIGEST
ZOOM
To zoom out/in
To access JPEG thumbnail
view during playback
•
•
BOOKMARK
To bookmark at any point during playback
PIP (Picture in Picture)
• Switch on or off the secondary video
•
SUBTITLE
• To display subtitle; press repeatedly
to select different subtitles available
in your disc
PIP AUDIO
AUDIO
Switch the secondary audio
of secondary video(PIP) to on or off
CONNECTED
•
To select the sound stream; press
repeatedly to select different audio
streams available in your disc
ANGLE
• To open the MC and directly into the
Connection folder
Switch the camera angle during playback
•
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connections
Make the following connection to use this
product.
Option 2: Connect to network
Connect this product to the network to
enjoy BD-LiveTM bonus content, Media
Server Search, Picasa, YouTube, BBC
iPlayer, External Control and software
upgrade by network.
Connecting to a TV
Connect the product to TV via HDMI jack to
view the playback from the disc.
Connect to the HDMI Jack
1. Connect the network cable from the LAN
jack on the product to the LAN jack on the
network system.
Option 3: Connect to Wifi
Your Blu-ray Disc™ player has an
integrated Wi-Fi® device and antenna. No
physical connection to the wireless router
is necessary.
HDMI IN
1. Connect a HDMI cable from the HDMI
output jack on this product to the HDMI
input jack on the TV.
wireless access point
Optional Connection
1 Configure your player to access the
wireless access point or router.
Option 1: Connect to the digital amplifier/
receiver
Option 2: Connect to network
Option 3: Connect to Wifi
2 The network configuration and
connection method may vary depending on
the equipment in use and the network
environment. Your Blu-ray Disc™ player is
equipped with an IEEE 802.11n wireless
module, which also supports the 802.11
b/g/n standards. For the best wireless
performance, we recommend using an
IEEE 802.11n certified Wi-Fi® network
(access point or wireless router).
Notes:
Option 1: Connect to the digital
amplifier/receiver
Route the sound from this player to other
device to enhance audio output.
DIGITAL AUDIO
INPUT
COAXIAL
– You must use a wireless IP sharer that supports
IEEE 802.11b/g/n. (n is recommended for stable
operaꢀon of the wireless network.)
– Wireless LAN, in its nature, may cause
interference, depending on the use condiꢀon
(AP performance, distance, obstacle,
interference by other radio devices, etc.).
– Set the wireless IP sharer to Infrastructure
mode. Ad-hoc mode is not supported.
– When applying the security key for the AP
(wireless IP sharer), only the following is
supported.
1. Connect a coaxial cable from the
COAXIAL jack on this product to the
COAXIAL jack on the device.
1. Authenꢀcaꢀon Mode: WPAPSK, WPA2PSK.
2. Encrypꢀon Type: WEP, TKIP, AES.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Preparation
Connect USB device
Always follow the instructions in this chapter
in sequence.
A USB flash drive provides an additional
memory to software upgrade and enjoy
BD-LiveTM bonus content.
You can also enjoy playing back MP3/
JPEG/MPEG4 files stored in the USB flash
drive.
Note:
- Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiaꢀon exposure or
other unsafe operaꢀon.
Prepare the remote control
1. Connect the USB flash drive to the USB
jack on this product.
Notes:
- To enjoy BD-Live™ bonus content, as your
local storage, use a 1 GB or larger USB
flash drive.
- For some Blu-rayTM discs with BD-LiveTM feature,
you may need to plug in the USB flash drive
before loading the disc. Otherwise, the disc may
not playback.
- TOSHIBA does not guarantee 100%
compaꢀbility with all USB flash drives.
1. Open the battery compartment.
2. Insert one R03 battery with correct
polarity (+/-) as indicated.
3. Close the battery compartment.
Notes:
- If you are not going to use the remote control
for a long ꢀme, remove the baꢁery.
- Risk of explosion! Keep baꢁery away from
heat, sunshine or fire. Never discard baꢁery in
fire.
Connect Power
1. Connect the AC power cable to:
- the wall socket.
• The product is ready to be set up for use.
Notes:
– Before connecꢀng the AC power cord, ensure
you have completed all other connecꢀons.
– Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the back of the unit.
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 10 m
- Either side of the centre: approx. 7 m
within 30°
- Above: approx. 7 m within 30°
- Below: approx. 7 m within 30°
– The type plate is located on the back of the unit.
m
7 m
7 m
10 m
7 m
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Playback
Setting up the player
Playback Functions
Find the correct viewing input
1. Press 1 to turn on this product.
Basic Playback
2. Turn on the TV and switch to the correct
video-in input (refer to the TV user manual
on how to select the correct input).
1. Press button on the front panel or the
remote control, your Blu-ray Disc™ player
will turn on.
The unit will take around 20 seconds to
warm up. When the power supply is first
switched on, the setup of the Power Down
Mode is in Normal mode.
2. Turn on the TV, and then select the input
setting on the TV that matches the
connection method you used to connect your
player.
3. Press OPEN/CLOSE Z to slide out the disc
tray.
Initial Setting
When you turn on this unit for the first time,
you need to follow these steps.
1. A welcome page will be displayed when
this product is powered on.
2. Press OK to enter language setting.
3. Select your desired language,
resolution and aspect ratio using /, then
press OK.
4. Press SETUP to exit the Setup menu.
4. Place a disc on the disc tray with the label
facing up, and then press OPEN/CLOSE Z to
slide back and close the disc tray.
The disc loading time depends on the types
of disc you are loading, and loading a Blu-ray
DiscTM will take longer time.
Use the SETUP menu
1. Press SETUP to display the Setup menu
when the Blu-ray DiscTM Player is playing or
no disc. And press SETUP to exit the Setup
menu.
5. If the disc does not start playing
Tip:
automatically, please press
B/
X
to start
- When playing high-definiꢀon sources, you must press
STOP buꢁon to enter SETUP interface.
playback.
6. If a Blu-ray DiscTM or DVD menu displays,
use cursor buttons to select PLAY. Then,
press OK to confirm.
Select menu display language
1. Press SETUP, [General Setting] menu
is displayed.
7. To eject the disc, press OPEN/CLOSE Z.
2. Select [Language], then press .
3. Select [OSD], then press .
- The language options may vary for
different regions.
Pause playback
1. Press
sound will be muted.
2. Press to resume the playback.
B/
X
to pause playback. The
B/X
4. Press / to select a language, then
press OK.
Note:
Stop playback
- If this disc player is connected to a HDMI CEC
compliant TV, skip this setting. It switches
automatically to the same OSD menu language
as per your TV setting.
1. Press STOP button once to go to resume
mode, the TV screen will show the resume logo.
2. Press STOP twice to stop the playback
completely.
3. Press
B/
X
to resume playback from the
point where playback is stopped or from the
beginning of the disc after the playback is
completely stopped.
Not all Blu-rayTM discs support the resume
feature.
Fast Forward and Fast Reverse
1. Press F.F M to fast forward through the
disc. The fast forward speed changes based on
how many times you pressed the button. The
11
Download from Www.Somanuals.com. All Manuals Search And Download.
speed will increase through the following
sequence:
Advanced Playback
2X, 4X, 8X, 16X, 32X
DISPLAY
2. Press
B/X
to resume playback.
Press this button and the screen will display
some information about disc, such as: Title
number, Chapter number, Track number,
Elapsed Time, Mode, Audio, Angle, and
Subtitle languages. Press this button again to
turn off the information display.
During DVD/CD playback, you may edit the
chapter and track.
3. Press F.R m to fast reverse through the
disc. The fast reverse speed changes based on
how many times you pressed the button.
The speed will increase through the
following sequence:
2X, 4X, 8X, 16X, 32X
4. Press
B/X
to resume playback.
REPEAT
Instant Search and Instant Replay
Press REPEAT repeatedly to select different
repeat modes.
1. During playback, press and hold M button,
you can search 30 seconds forward.
Blu-ray DiscTM : Repeat Chapter and Title.
DVD: Repeat Chapter, Title and All.
VCD PBC Off/CD-DA/JPEG/MP3: Repeat Track
and All.
2. During playback, press and hold m
button, you can instant replay the content
from 10 seconds before.
A-B
To play certain section within the video or
song, press A-B button to set the start point.
Then, press A-B button again to set the end
point and complete the setting. The selected
section will be played repeatedly.
Press A-B button the third time to cancel this
function. The end point cannot be set until 5
seconds of playback has elapsed from the
start point.
Previous and Next
During playback, press PREV . button,
and you can skip back to the previous
chapter or track. Each press of this button
will allow you to skip a chapter or track till
the beginning of the disc.
Press of NEXT > button during playback
will allow you to skip the playback to next
chapter or track.
Not all Blu-rayTM discs support the repeat A-B
feature.
Slow Forward
GOTO
1. Press =B during normal playback. The slow
forward speed is 1/16 in default.
2. To change slow forward speed, press =B
repeatedly, and the slow forward speed will be
changed in the following sequence: 1/16, 1/8,
1/4, 1/2, normal.
During playback, press GOTO button to edit
Title, Chapter, and Time.
Press / and OK button on the remote
control to select Title, Chapter, or Time. Then
press the numeric buttons or / and then
press OK. The playback will skip to the
desired location.
3. To exit slow forward mode and return to
normal playback, press
.
B
/X
For Time Search, press / to select Title
or Chapter time search.
Step Forward
Use this feature to help you to enjoy the
video frame by frame.
SUBTITLE
Press this button repeatedly and the screen
will display “X/XX XXX” or “Off”. The “X”
indicates the current number of this
language; “XX” indicates the total number of
language; “XXX” indicates the language.
The number of available languages depends
on the disc.
1. Press
B/X
during normal playback, then
playback will change to pause state.
2. Press ==B repeatedly to advance the
picture frame by frame.
3. Press
B/X
to resume normal playback.
CONNECTED
To open the MC and directly into the
Connection folder.
RETURN
Press this button to return to the previous
on-screen menu in setup menu such as
External Memory Information, Parental
Control, Country Code, etc.
During MP3/JPEG/VIDEO playback, press
RETURN once, it will return back to Media
Center page.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
• System Information
PROGRAM
During CD/DVD/VCD playback, you can press
this button to edit the sequence of the
During VCD disc playback and PBC On is
selected, press the button to return to PBC
Menu.
ANGLE
During playback, press this button to change
the angle of the picture. The screen will
display “Angle X/X.” The first “X” indicates the
current number of angle, and the second “X”
indicates total number of angle.
playlist.
BOOKMARK
During VCD/ DVD disc playback, press the
BOOKMARK button to add the bookmark;
press and hold for a few seconds to display
the list of bookmark which you added before
on the screen, then you can press the OK
button to select the bookmark or CLEAR
button to delete the bookmark.
AUDIO
Press AUDIO button on the remote control to
select the audio streams that set within the
Blu-rayTM or DVD disc.
The screen will display:
AUDIO: X / XX XXX XXXX
“X” - The Current Audio Stream Number
“XX” - The total number of Audio Stream
“XXX” - Audio Language
Not all Blu-rayTM or DVD has the multi-angle
feature. The screen will take around 5
seconds to change.
TOP MENU
You may press this button at any time, and
the Blu-ray DiscTM or DVD video disc playback
will pop up the disc menu.
POP UP/MENU
During Blu-ray DiscTM playback, press POP
UP/MENU to display the disc title, and the
playback will not be stopped even the menu
is on the screen.
1. Press the /// buttons to select an
option, then press OK to confirm.
2. Press POP UP/MENU to close the menu.
During DVD playback, press POP UP/MENU
to open the disc menu.
During VCD playback, press POP UP/MENU
to switch PBC On/Off.
During displaying USB and Data Disc file
content in media center, press POP UP/MENU
to add the Photo/Music/Video files to the
playlist.
1. Press /// buttons to select an
option under the Photo/Music/Video files.
2. In the file browser, press to select the
file(s) to be added to the playlist. "√ " will
appear beside the selected files.
3. Press POP UP/MENU button, a pop up
menu will appear, then press / and OK
button to select "Add to Playlist" to add the
files to the Playlist. "Select all" and "Clear all"
options are also available. Select "Cancel" to
exit the pop up menu.
“XXXX” - Audio Technology
MC
Press this button to open Media Center. In
Media Center, you can choose to play the files
in USB, Data Disc, Media Server Search or to
use other network features.
ZOOM
Press ZOOM button repeatedly to Zoom in/out
playback in the video.
Zoom mode : Zoom 2x -> Zoom 3x -> Zoom
4x -> Zoom 1/2 -> Zoom 1/3 -> Zoom 1/4.
DIGEST
During playback of JPEG disc, press DIGEST
to view a page of 12 thumbnail images.
- Use /// to select an image.
Press OK to view the selected image in
full-screen and subsequent images will be
displayed one after another automatically.
- Press PREV /NEXT
previous or next thumbnail screen.
PIP AUDIO
to view the
Press PIP AUDIO button to open the
secondary audio of secondary video(PIP’s
sub-window video).
All the selected files will be added to the
"Playlist" folder. You can play or delete the
files in the playlist. Press POP UP/MENU to
OSC
delete the selected files in "Playlist".
Press OSC to open On Screen Control menu
during playback. In this menu, you can make
some playback-related control.
The on screen control contains following
items:
[Title]: The title in current playback/titles in
total. Select your desired title to playback.
[Chapter]: The chapter in current playback/
chapters in total. Select your desired chapter
to playback.
Note:
- This funcꢀon is disabled for media server
browsing.
SETUP
Press the SETUP button, and the screen will
display some information about the player,
such as:
• General Setting
• Display Setting
• Audio Setting
13
Download from Www.Somanuals.com. All Manuals Search And Download.
[Time]: View the elapsed/remaining playback
time of title/chapter. Use / to view: the
elapsed playback time of title, the remaining
playback time of title, the elapsed playback
time of chapter, and the remaining playback
time of chapter.
Blu-ray DiscTM BONUSVIEWTM
Playing Secondary Video (Picture-in-Picture)
and Secondary Audio is for Blu-ray DiscTM only.
Secondary video can be played from a disc
compatible with the Picture-in-Picture (PIP)
function. For the playback method, refer to the
instructions for the disc.
[Mode]: Select playback mode among
shuffle, random, and normal.
[Audio]: The Blu-ray DiscTM/DVD disc’s
soundtrack language. Use / to view the
audio available in the disc and select your
desired Audio type.
1. Turn on secondary video by pressing the
PIP button.
2. Press the PIP AUDIO button to select the
secondary audio, and select an option except
Off. The secondary audio is opened, you can
hear the disc secondary video sound.
In order to hear the secondary audio, the PIP
feature on the disc must be turned on.
3. Press the PIP button again to turn off the
[Angle]: The angle view of current playback/
the angles in total. Please reference
Playback > Angle to see more detailed info.
Use / to select your desired angle view.
[Subtitle]: The Subtitle in current playback.
Use / to view the subtitles available in
the disc and select your desired subtitle type
or turn it off.
secondary video.
Primary video
[Subtitle Style]: When you play the Blu-ray
DiscTM or DVD disc and if it has external
subtitle, you will see it in OSC menu.
[Bitrate]: Use / to select audio or video
bitrate.
[Still Off]: Close the Still feature of DVD disc.
For some DVD discs, a certain video picture
will be frozen as a still picture during the
process of playback to let the user has a
better view of certain picture. To continue
playback, select Still Off.
[Instant Search]: Instant search 30 seconds
forward.
[Instant Replay]: Replay the content from 10
seconds before.
Secondary video
with Secondary Audio
This function is not available when the
primary video is played in Search, Slow-
Motion, or Frame-by-Frame or Fast Forward/
Reverse mode.
To listen to the secondary audio, the digital
audio output must be set to "Bitstream",
"Re-encode" or "PCM". Otherwise, only the
primary audio can be heard.
Tip:
- The specified operaꢀon for each item will vary with
disc types. And some items are available only when
the disc is supportable.
Notes:
- Not all the Blu-ray™ discs can support this
funcꢀon.
- High Definiꢀon PIP (Second Video) is not
supported.
Watermark
This product uses Cinavia technology to limit
the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks. When a prohibited use of
an unauthorized copy is detected, a message
will be displayed and playback will be
interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer
com. To request additional information about
Cinavia by mail, send a postcard with your
mailing address to: Cinavia Consumer
Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
{On} - Turns on REGZA-LINK features.
-With CEC on, during TV standby with
the Blu-ray DiscTM player on, pressing
SETUP, PLAY/PAUSE will power on the
TV. When you turn the TV off, this unit
will automatically turn off.
6 Customizing
This section describes the various setting
option of this Blu-ray DiscTM player.
If the setup option is greyed out, it means
the setting cannot be changed at the
current state.
{Off} - Disables REGZA-LINK features.
[Load Default]
•
General Setting
Reset all settings of Blu-ray DiscTM player
to initial default state.
1. Press SETUP button on the remote
control. The Setup Menu appears.
- Follow the instruction on the TV screen
to confirm the default setting operation.
1. Select Load Default.
2. A dialogue box pops up shown as
below. Select OK.
General Setting
Screen Saver
Disc Auto Playback
CEC
On
System
On
Language
Playback
Security
Network
On
Load Default
Upgrade
More...
More...
Load Default
Move cursor key to select menu option
then use “OK” key to select
Do you want to load default?
Cancel
SETUP Exit
2. Press to select an option, then press
to access.
3. Press / to select a setup option and
press .
4. Select the setting you wish to change
and press OK to confirm.
3. It may take awhile when loading
default is in progress. Please wait...
Load Default
Loading default, please wait...
- Press to return to the previous menu.
[System]
30%
To change the following system option to
4. TV will display as follow:
personalize your Blu-ray DiscTM player.
Welcome
to the Toshiba Blu-ray Disc Player Setting
Wizard.
•
[Screen Saver]
Turn On or Off the screen saver mode.
It helps to protect the TV screen.
{ On } – Set the screen saver active
after approximately 5 minutes with no
operation. You can turn off the screen
saver by pressing the SETUP button.
- The Blu-ray DiscTM player will switch to
standby mode if there is no operation
after the screen saver is engaged for
approximately 10 minutes.
{ Off } – Turn off the screen saver
mode. The Blu-ray DiscTM player will not
switch to standby mode automatically.
[Disc Auto Playback]
Turn On or Off the disc automatic
playback switching mode.
Some simple settings are suggested before you
begin. You can also access detailed settings
from the Setup Menu.
OK
Next
5. Press OK, enter language setting.
Press/ to select a language option.
Choose
an OSD language before starting.
English
The language selected will be applied not only
here but also in other OSD windows, menus
etc.
•
•
Previous
OK
Next
6. Press OK, enter Resolution setting.
{On} – The disc playback automatically
after loading.
{Off} – Turn off disc auto playback
mode.
[CEC]
Auto
480i/576i
480p/576p
720p
Choose
a resolution that fits your TV.
Change will be applied immediately, you have
15s to determine whether to save the setting
or rollback to prior resolution. Better
performance will be provided by an HDMI
connection!
1080i
1080p
This player supports REGZA-LINK which
uses the HDMI CEC (Consumer
Electronics Control) protocol. You can
use one single remote control to control
all REGZA-LINK-compliant devices that
Previous
OK Next
are connected through HDMI
connectors.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Press / to select an option. Press OK.
Select "Yes" or "No" using /.
- When you upgrade the system using USB flash
drive, you should make a new folder named
UPG_ALL, and copy the upgrade file into this
folder.
SW upgrade by Internet introduction
There are two modes to upgrade via
internet: Automatic Mode and Interactive
Mode.
Resolution
14s
has been changed!
Yes
Does everything looks all right with this
No
resolution? Press Yes if you want to apply it.
Press No to rollback to previous one.
Previous
OK
Next
Automatic Mode:
The player will check the Internet whether it
is connected automatically when powered on.
If connected, player will try to connect the
Toshiba server to check if there is new
firmware for the player.
7. Press OK, enter Aspect ratio setting.
Choose
16:9 Full
an aspect ratio that fits your TV.
16:9 Normal
The change will be applied in the next page.
Determine whether to save the setting or
rollback to the previous aspect ratio.
4:3 Pan&Scan
4:3 Letterbox
If yes, the player will pop up a message on
the screen to inform you that an upgrading
firmware is available on the internet. You can
choose whether to upgrade or not.
Upgrade
OK
Next
Previous
Press / to select an option. Press OK.
Setting
New software found! Upgrade?
wizard is complete!
Now press the OK button to finish and return
to the Setup Menu.
Cancel
OK Start
Interactive Mode:
You can also do Internet upgrade via setup
menu.
Previous
OK Finish
8. Press OK to return to [General Setting]
Menu.
[Upgrade]
You should make sure that the player is
connected to the internet first.
Press SETUP button of the remote control,
then choose "System -> Upgrade ->
Internet" and press OK button. Then the
player will connect the Toshiba server to
check if there is new firmware for the player.
Upgrade
•
For software upgrades to enhance
performance, you could select the
following upgrade method and start to
upgrade.
{Disc}/{USB Storage}/{Internet}
SW upgrade by Disc/USB Storage
Upgrade the software from the disc or USB
flash drive.
Connecting to the server. Please wait!
1. Insert the disc or connect the USB flash
drive which contains the upgrade file
package.
2. Follow the instruction on the TV
screen to confirm upgrade operation.
- The system will reboot after 5 seconds or
OK key is pressed.
If yes, the player will pop up a message on
the screen and you can choose whether to
upgrade or not.
Upgrade
New software found! Upgrade?
Notes:
- If set [Disc Auto Playback] to [Off], aſter you
insert the disc that contains the upgraded
informaꢀon to upgrade system, you have to start
upgrade from this opꢀon of SETUP Menu.
- If the upgrade file package did not pass the
verificaꢀon, error prompt is displayed , check the
package again (such as the package is not
complete).
Cancel
OK Start
If no, the player will pop up a message on
the screen to inform you that there is no new
firmware for the player.
Upgrade
Current version is latest. Update is not
available.
- Make sure the firmware version is not an old
version.
Cancel
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Remark :
standby power consumption is low. In
Quick Start mode, Power On or Power Off
takes shorter time and its standby power
consumption is higher.
If you choose to upgrade the new FW ,
1.The player will begin to download the
upgrade file and pop up a message to show
the progress.
Notes:
Upgrade
- Please be noted that the responding ꢀme to
the video output varies for different TV,
therefore the responding ꢀme to power on the
TV in Quick Start mode may vary.
- The player will reset to Normal mode
whenever the AC power recovers from a loss.
[Language]
Set up the OSD(On-Screen Display), Menu,
Audio and Subtitle default language for the
player.
Downloading upgrade file.Please wait!
Cancel
2. When download is finished, the player will
pop up a message for you, and you can choose
whether to proceed with the upgrading or not.
If you choose to upgrade, the player will begin
to upgrade, and pop up a message to show the
progress. When upgrade is done, the player
will restart.
Attention! Do NOT cut off the power supply
when the firmware is upgrading! If not, the
player might become unworkable.
General Setting
OSD
English
English
English
English
System
Menu
Audio
Subtitle
Language
Playback
Security
Network
Move cursor key to select menu option
then use “OK ” key to select
• [External Memory]
Exit
SETUP
External Memory would be used in BD-
LiveTM function. When you plug in the
USB flash drive which has at least 1GB
free space to play BD-LiveTM function,
the Blu-ray DiscTM system would make a
directory named BUDA automatically.
Information will display the Free size.
1. Press OK.
• [OSD]
Select the default on-screen display
language.
•
[Menu]
Select the default menu language.
• [Audio]
Select the default audio language.
• [Subtitle]
Select the default subtitle language.
[Playback]
2. Follow the instruction on the TV
screen to select {Information}.
General Setting
General Setting
Information
f
System
On
On
On
On
On
System
Angle Mark
PIP Mark
Language
Playback
Security
Network
Language
Playback
Security
Network
Free size is : 0MB
Secondary Audio...
Last Memory
PBC
Erase
Move cursor key to select menu option
then use “OK ” key to select
Move cursor key to select menu option
then use “OK ” key to select
RETURN Return
SETUP Exit
3. Press OK to select "Erase", the data
in the BUDA folder will be cleared.
• [Angle Mark]
Some Blu-rayTM discs/DVDs contain the
scenes recorded with multiple angles,
which allow you to enjoy the videos with
your desired angles, therefore the angle
mark is displayed only when the Blu-ray
Disc™/DVD disc is supportable for multi-
angle and Angle Mark is set to ON.
• [Power Down Mode]
Quick Start can reduce the time of Power
On or Power Off significantly. But the
power consumption is higher in Quick Start
mode.
Setting methods:
Setup Menu -> General Setting -> System
-> Power Down Mode -> Normal/Quick
Start (Default as Normal).
{On} – Display the angle mark.
{Off} – Hide the angle mark.
Choose Quick Start to go into Quick Start
mode. This mode will only be activated
upon your next standby Off/On.
Generally, in Normal mode, Power On or
Power Off takes longer time and its
• [PIP Mark]
The Picture -In- Picture (PIP) mode display
two pictures on the TV screen at the same
time, the full screen picture is called Main
Window and the small inset window is
17
Download from Www.Somanuals.com. All Manuals Search And Download.
called Sub Window. The PIP mark is
displayed when in PIP mode and PIP Mark
is set to ON.
{On} – Display the PIP mark.
{Off} – Hide the PIP mark.
Note:
[Security]
General Setting
Change Password
Country Code
More...
System
More...
More...
Language
Parental Control
Playback
Security
Network
- High Definiꢀon PIP (Second Video) is not
supported.
• [Secondary Audio Mark]
Move cursor key to select menu option
then use “OK ” key to select
SETUP
Exit
•
[Change password]
Follow the instruction on the TV set or
change the password for locked discs
and play restricted Blu-rayTM discs/
{On} – Display Secondary Audio Mark.
{Off} – Hide the Secondary Audio Mark.
• [Last Memory]
If you open the disc tray or switch this
Blu-ray Disc™ player to standby state
during normal playback, the Blu-ray Disc™
player can memorize the end playing point,
the player will start playback from the
memorized point next time.
DVDs.
General Setting
Screen Save
Off
System
Change Password
Language
Playback
Security
Network
Pleaseentercurrentpassword:
Move cursor key to select menu option
then use “OK ” key to select
{On} – Active Last Memory feature.
{Off} – Disable Last Memory feature.
Note:
RETURN Return
1. Use NUMBER keys to enter four digit
old password. The default password
is "0000".
- Not all the Blu-rayTM discs can support this
funcꢀon.
2. Enter the new password.
•
[PBC]
General Setting
VCD2.0 has PBC control (Playback Control)
menu, which allow you to interact with the
system via menu.
{On} – Display playback control menu, use
NUMBER keys to select desired option.
{Off} – Hide playback control menu and
start playback from track1 automatically.
Screen Save
Off
System
Change Password
Language
Playback
Security
Network
Newpassword:
Confirm password
:
Move cursor key to select menu option
then use “OK ” key to select
RETURN Return
3. Enter the new password again to confirm.
• [Country Code]
• [Closed Caption]
Allow people who are deaf or hearing
impaired, to have access to television
programming by displaying the audio
portion of a television programme as text on
the screen.
This ensures that you will be able to see
the scenes intended for your current
residential Country/Area.
Use NUMBER Keys to enter your
password, then you can choose your
Country/Area.
{On} – Display the Closed Caption.
{Off} – Hide the Closed Caption.
•
[Parental Control]
Restricts access to discs that are
unsuitable for children. These discs must
be recorded with rating.
1. Press OK.
2. Use NUMBER keys to enter the
password.
General Setting
Screen Save
Off
System
Parental Control
Language
Playback
Security
Network
Enter password:
Move cursor key to select menu option
then use “OK ” key to select
Return
RETURN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select a rating level, then press OK.
Notes:
General Setting
- Ensure that the network cable is properly
connected and the router is switched on.
- During [Manual] mode, if the number is entered
incorrectly, press to erase the number.
- This player does not support automaꢀc detecꢀon of
cross-cables. Use the straight (standard) LAN cable.
Connect to network with Wireless
1. In the Setup menu, select [Network], then
press .
ceen Sve
f
System
Parental Control
Language
Playback
Security
Network
Select level:
Off
[1] KID SAFE
[2] G
Off
Return
RETURN
Items
Description
2. Select [Interface] in the menu, then press OK
to select [Wireless].
3. A message will pop up on the screen, select
"Yes" to continue.
4. Select [Scan] or [Manual] or [Auto].
5. Then select "Next" and press OK to continue.
[Scan]
KID SAFE Safe for kids
G
All children and general guidance
Parental guidance
PG
PG-13
PGR
R
Parental guidance for children under 13
Parental guidance Recommended
Restricted viewing
Select [Scan] in the menu, the Blu-ray DiscTM
player will start scanning and provide a list of
available network in your area. Select your
network ID and then press OK twice, the
alphanumeric keys will appear for you to
input your password. If your network does
not required password, press OK once.
[Manual]
If you know the details information of a
network, you can choose this way to connect a
wireless network. First, enter the ID of the
network (SSID), then select the encryption
type of WPS and lastly enter the password.
Press OK to call out the alphanumeric keys
on the screen for your entries. Then you can
connect the Blu-ray DiscTM player to the
network.
NC-17
ADULT
No one 17 and under allowed
Adult only
Notes:
- Rated discs above the level you set in [Parental
Control] require a password to be entered.
- The raꢀngs are country dependent. To allow
all discs to play, select 'Off'.
[Network]
General Setting
System
Interface
Language
Playback
Security
Network
Wireless Setting
IP Setting
Connection Test
Information
Move cursor key to select menu option
then use “OK ” key to select
SETUP Exit
To enjoy BD-LiveTM bonus contents,
Media Server Search, Picasa, YouTube,
BBC iPlayer and External Control, set up
the network connection.
Connect to network with Ethernet
1. Connect the Blu-ray Disc™ player to
the broadband modem or router.
2. In the Setup menu, select [Network],
then press .
3. Select [Interface] in the menu, then
press OK to select [Ethernet].
4. Select [IP Setting] in the menu, then
press OK to select [Auto]. An IP address
is obtained automatically.
If no IP address is obtained, select
[Manual] to input IP Address, Subnet
Mask, Default Gateway, DNS1/DNS2
and press OK to re-connect again to the
network. It will try to obtain the IP
address again.
[Auto]
The Blu-ray DiscTM player will try to connect
automatically to a wireless network.
PBC (Push Button Configuration):
1. Turn on the router, set it to WPS, then press
WPS button if it has it.
2. Switch on the Blu-ray DiscTM player and
connected devices, then use remote control to
choose: General Setting -> Network ->
Interface -> Wireless -> Auto -> PBC -> Next.
3. Press SETUP to exit.
PIN (Personal Information Number):
1. Turn on the router.
2. Switch on the Blu-ray DiscTM player and
connected devices, then use remote control to
choose: General Setting -> Network ->
Interface -> Wireless -> Auto -> PIN.
A set of PIN code will be prompted.
3. Then open web browser to go to the router
setting page to input the PIN code.
4. Select "Next" on the Blu-ray DiscTM player.
5. Press SETUP to exit.
5. Press RETURN or press OK to exit.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
{User Name}
Notes:
Input the User Name (to control the
Blu-ray DiscTM player from the iPhone
etc.) by using the on-screen software
keyboard.
Strings(Max. 16 characters), [a-zA-Z0-9]
[a-zA-Z0-9_-¥.]*
- Ensure that the Wifi router is switched on.
- A contract with the provider is needed to connect to
the Internet.
- Loading BD-Live™ content from the internet may
take some ꢀme, depending on the file size and the
TM
speed of the internet connecꢀon. To enjoy BD-Live
{Password}
bonus content, you need to connect 1GB or larger USB
flash drive.
-DependingontheWPStype,passwordinputprompt
may not be displayed.
- The network ID (SSID) and password input are case
sensitive.
Input the Password (to control the Blu-ray
DiscTM player from the iPhone etc.) by
using the on-screen software keyboard.
Strings(Max. 16 characters), [a-zA-Z0-9]
[a-zA-Z0-9_-¥.]*
{Port Number}
•
[Interface]
Port Number should be 80 or integer from
2000 to 10000, the default value is 4000.
Note:
- Toshiba does not guarantee normal operaꢀon
with all connected devices.
Choose the way to connect network,
Ethernet or Wireless.
•
[Wireless Setting]
When "Wireless" is chosen in Interface,
you can use Wireless Setting option to
search and connect a wireless network.
[IP Setting]
(*)Notes:
•
•
- Strings(1-15 characters), [A-Z][A-Z0-9]*
You can input 1-15 characters in Device Name,
[A-Z] represent the first character, you can only
choose from capital leꢁer A to Z. [A-Z0-9]
represent the rest of the characters, you can
choose from capital leꢁers A to Z or numbers
from 0 to 9.
{Auto} – Auto obtain network information.
{Manual} – Manual setup network
information.
[Connection Test]
Display Network connection status
information.
[Information]
Display all Network Information.
[BD-Live Connection]
{Permitted} – During playback of
BD-Live™ disc, the disc may
automatically download all information
from appointed network.
{Partial Permitted} – During
playback of BD-Live™ disc, the disc may
automatically download partial of the
information from appointed network.
{Prohibited} – Disable downloading
information from network.
[Media Server Search]
Enable or disable the Media Server Search
feature. See details in page 22 for Media
Server Search introduction.
{Enable} – Enable the Media Server
Search feature.
•
•
- Strings(Max. 16 characters), [a-zA-Z0-9]
[a-zA-Z0-9_-¥.]*
You can input 1-16 characters in User Name
and Password, [a-zA-Z0-9] represent the first
character, you can choose from both the
lower-case a to z and capital leꢁers A to Z or
number from 0 to 9.[a-zA-Z0-9_-¥.] represent
the rest of the characters, you can choose from
both the lower-case a to z and capital leꢁers A
to Z, numbers from 0-9 or symbols.
Display Setting
•
•
1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [Display Setting],
then press .
3. Select an option, press to access.
Display Setting
TV Screen
Resolution
16:9 Full
Auto
{Disable} – Disable the Media Server
Search feature.
[External Control Setting]
Set up the External Control Setting
information.
TV
Video Process
Color Space
YCbCr422
HDMI Deep Color
HDMI 1080/24p
Off
On
Move cursor key to select menu option
then use “OK ” key to select
Exit
SETUP
{Device Name}
4. Press / to select a setup option and
press .
Input the Device Name (to control the
Blu-ray DiscTM player from the iPhone etc.)
by using the on-screen software
keyboard.
5. Select the setting you wish to change
and press OK to confirm.
- Press to return to the previous
Strings(1-15 characters), [A-Z][A-Z0-9]*
20
Download from Www.Somanuals.com. All Manuals Search And Download.
resolution setting.
menu.
{Off} – Disable 1080/24p video
- Press SETUP to exit the menu.
[TV]
[TV Screen]
resolution setting.
Notes about HDMI 1080/24p:
If you want the 1080/24p output, it should fulfill
below 3 conditions:
•
Select the screen format according to
how you want the picture to appear on
the TV.
{16:9 Full} – For a disc with the aspect
ratio of 4:3, the output video is
stretched into 16:9 full screen.
{16:9 Normal} – For a disc with the
aspect ratio of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{4:3 Pan&Scan} – For standard TV, it
displays a wide picture on the entire
screen and cuts off the redundant
portions.
1.TV supports the 1080/24p display;
2.Player choose the 1080/24p option in the setup
menu;
3.Media must be the 1080/24p video.
Notes:
- This resoluꢀon becomes effecꢀve only when
the playing Blu-ray Disc™ contents are Film
source.
- During HDMI 1080/24p playback, there will
be no composite output.
[Video Process]
Display Setting
Video Adjust
Sharpness
More...
Low
TV
Video Process
{4:3 Letterbox} – For standard TV, it
displays a wide picture with two black
borders on the top and bottom of 4:3
screen.
Move cursor key to select menu option
then use “OK ” key to select
SETUP Exit
•
[Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the TV.
{480i/576i}, {480p/576p}, {720p},
{1080i}, {1080p}
•
[Video Adjust]
Select a predefined setting of the video.
1. Press OK.
2. Press/ to adjust the video
Brightness, Contrast, Hue and
Saturation.
{Brightness} - Press / to adjust
the brightness of display, goes left
means dark and right means bright.
{Contrast} - Press / to adjust the
contrast of display, goes left means low
contrast and right means high contrast.
{Hue} - Press / to adjust the Hue of
display, goes left means low hue and
right means high hue.
{Saturation} - Press / to adjust
the saturation of display, goes left
means low Saturation and right means
high saturation.
– Select a video resolution setting that
is best supported by the TV. See TV
manual for details.
[Color Space]
Select a predefined Colour space of
picture.
{RGB} – Select RGB Colour space.
{YCbCr} – Select YCbCr Colour space.
{YCbCr422} – Select YCbCr422 Colour
space.
{Full RGB} – Select Full RGB Colour
space.
•
•
[HDMI Deep Color]
3. Press RETURN to exit.
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports Deep
Colour feature.
{30 bits} – Output 30 bits Colour.
{36 bits} – Output 36 bits Colour.
{Off} – Output standard 24 bits Colour.
Note:
Brightness
Contrast
Hue
ꢀ
ꢀ
ꢀ
ꢀ
Saturation
Change
Exit
RETURN
- When the colour space is "YCbCr422", even if
HDMI Deep Color is set to 30bits/36bits, it is not
output with Deep Colour.
•
[Sharpness]
Select the level of sharpness: High,
Middle, Low.
{High} - Select High sharpness level.
{Middle} - Select Middle sharpness.
•
[HDMI 1080/24p]
{On} – Enable 1080/24p video
21
Download from Www.Somanuals.com. All Manuals Search And Download.
level.
{192K} – For discs recorded at sampling
rate of 192 kHz.
[Dolby DRC]
{Low} - Select Low sharpness level.
•
Select the Dynamic Range Control mode
which makes it available to listen to a
movie at a low volume without losing
sound clarity.
{Off} – Non-dynamic range compress.
{On} – Dynamic range compress.
{Auto} – Adjust the DRC according to
input audio.
Audio Setting
1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [Audio Setting],
then press .
3. Select an option, press to access.
Audio Setting
The setting of Auto is effective for Dolby
TrueHD.
PCM
Audio Output
Coaxial
HDMI
PCM
48K
Down_samp
Dolby DRC
Auto
System Information
Move cursor key to select menu option
then use “OK ” key to select
Exit
SETUP
1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [System
Information].
- The current software version and MAC
address(Ethernet and Wireless) will be
displayed.
4. Press / to select a setup option and
press .
5. Select the setting you wish to change
and press OK to confirm.
- Press to return to the previous
menu.
- Press to return to the previous
menu.
- Press SETUP to exit the menu.
[Audio Output]
- Press SETUP to exit the menu.
•
•
•
[Coaxial]
System Information
Select the output mode of COAXIAL
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output digital signal
without any processing.
{PCM} – Output digital signal with
processing, only two channels export.
{Re-encode} – Auto select signal type
from COAXIAL jack according to the
Audio stream on disc.
{Off} – No output for Coaxial.
[HDMI]
Select the output mode of HDMI
OUTPUT jack, options include Bitstream,
PCM, Re-encode and Off.
{Bitstream} – Output HDMI digital
signal without any processing.
{PCM} – Output HDMI digital signal
with processing.
{Re-encode} – Auto select signal type
from HDMI OUTPUT jack according to
the Audio stream on disc.
{Off} – No output for HDMI.
[Down_samp]
Software version: V XX
Ethernet MAC: E8-E0-B7-XX-XX-XX
Wireless MAC: XX-XX-XX-XX-XX-XX
Move cursor key to select menu option
then use “OK ” key to select
Exit
SETUP
Network Functional description
Media Server Search
With this player connected to network, you
can play video, music and photo files from
the server.
1. Connect this player to server network.
2. Press MC.
3. Select [Media Server Search], and press
OK.
»» All the connected shared servers/
folders are shown in the list (Max. 16).
4. Select a server, and press OK to open it.
5. Select a kind of media (Photo, Music,
Video) and press OK to open it.
6. Select a file or a folder to play or open
it. You can only see and play files
supported by both Windows Media player
and the Blu-ray DiscTM player.
• You may control play with the disc play
features.
Select the digital audio signal sampling
frequency. (Only Coaxial)
{48K} – For discs recorded at sampling
rate of 48 kHz.
{96K} – For discs recorded at sampling
rate of 96 kHz.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
to select an option:
- When using Media Server Search, you need to
setup the network server according to each server
Specificaꢀon.
• Current playing: Display the index of the
current photo.
• Slideshow pause/play: Pause or play a
slideshow.
• Rotate: Rotate the current photo.
• Zoom: Zoom in or zoom out the photo.
• Effect: Select a slideshow effect.
• Speed: Select a slideshow speed.
• Add this friend: Add the owner of the
current photo to the friends list.
5. To return to the previous screen, press
.
Picasa
With this player, you can access, search
and view photos stored in your Picasa Web
Albums.
What you need to do:
to create an account with Picasa Web
Albums. You need to do this only once.
1. Connect this player to the Internet.
2. Press CONNECTED button in remote
control; or press MC, select [Connection],
and press OK.
3. Select [Picasa], and press OK.
»» The default Picasa page is displayed on
the TV screen.
YouTube
With this player connected to the Internet,
you can browse, search and watch
YouTube videos.
1. Connect this player to the Internet.
2. Press CONNECTED button in remote
control; or press MC, select [Connection],
and press OK.
4. Log into the Picasa Web Albums with
your Picasa web account.
3. Select [YouTube], and press OK.
»» The default YouTube page is
displayed on the TV screen.
4. Use the remote control to navigate and
select options.
• To exit YouTube, press MC.
Note:
- If you do not press any buꢁon for few
seconds, the on-screen buꢁons and menu will
disappear.
• For the first time log in, select “New
User”.
• To enter your Username and Password,
press OK and the alphanumeric keys will
appear on the TV screen for your entries.
• To delete your created User Account,
press the red button on the remote
control.
5. Use the remote control to navigate to
select:
• My Photos: Display the photos stored in
your Picasa Web Albums.
• Featured: Display the featured photos
from Picasa website.
• Friends: Display the list of friends.
• Search: Search photos based on
keywords.
• Favorites: Display the favourite photos
from your Picasa Web Albums.
• Tag: Display the photos that have been
tagged in your Picasa Web Albums.
6. To exit the Picasa page, press RETURN.
Play a slideshow
BBC iPlayer
With this player connected to the Internet,
you can browse, search, watch BBC iPlayer
videos and listen to BBC iPlayer radio.
1. Connect this player to the Internet.
2. Press CONNECTED button in remote
control; or press MC, select [Connection],
and press OK.
3. Select [BBC iPlayer], and press OK.
»» The default BBC iPlayer page is
displayed on the TV screen.
4. Use the remote control to navigate and
select options.
• To exit BBC iPlayer, press RETURN.
1. Use the remote control to select “My
Photos” from the Picasa page, and press
OK.
»» The photos in your Picasa Web Albums
are displayed in thumbnails.
2. Select a photo, and press OK to view
the photo in full screen.
3. Press OK again to start a photo
slideshow.
4. During slideshow, press [OSC] to access
the following options, and then press OK
23
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Specification
• Dimensions (w x h x d):
360 ×36× 200(mm)
• Net Weight: 1.22 kg
• Operating temperature: 5°C to 35°C
• Operating humidity: Less than 80 %
(no condensation)
Playable media
This product can play:
• Blu-ray Disc™-Video, BD-R/RE2.0, BDAV
• DVD, DVD-Video, DVD+R/+RW,
DVD-R/-RW, DVD+R/-R DL (Dual Layer)
• Video CD/SVCD
• Audio CD, CD-R/CD-RW
• AVCHD
Accessories supplied
• Remote control
• USB flash drive
One R03 (AAA size) battery
• Simple IB
•
Video
Signal system: PAL/NTSC
HDMI Output: 480i/576i, 480p/576p,
720p, 1080i, 1080p, 1080/24p.
Compaꢀble ꢁle formats
MP3 tracks
Audio
• Supported file extension: '.mp3'
• Supported audio codec : MP3
• ISO format
• Supported corresponding bitrate: 8kbps-
320 kbps
• Digital output (Coaxial):
0.5 Vp-p (75 ohm)
• HDMI output
• Supported sampling frequencies: 32kHz,
44.1kHz, 48kHz
LAN
• LAN terminal 10BASE-T/100BASE-TX
JPEG
WIFI
• Supported file extension: '.jpg' or ‘.jpeg'
• JPEG/ISO format
• Does not support Picture CD
• This player supports Single-frequency
2.4GHz wireless signal and all frequency
channel.
IEEE 802.11b/g/n
Authentication Mode: WPAPSK, WPA2PSK
Encryption Type: WEP, TKIP, AES
MKV
• Supported file extensions: '.MKV'
• Supported video codecs: H264 MP/HP,
MPEG4 SP/ASP, MPEG1, MPEG2
• Supported audio codecs: AAC 2ch &
5.1ch, MP3, AC3, DTS, LPCM
• Supported subtitles: Text/UTF8, SSA,
SMI, SUB, SRT, ASS
USB
• USB 1.1 / USB 2.0 Full-speed / USB
2.0 High-speed
• Supporting range: USB Mass Storage
Class Device, 4 ports USB HUB, Card
reader, Flash disk
• Playback of MKV files in CD-R/RW may
not be compatible
• Some MKV format discs may not play,
depending on the video resolution and
frame rate condition
• Supported file system: FAT32
• Maximum size supported: 1000GB
(HDD needs self-powered)
• Does not support unpowered HDD
Other formats
• MP4 ('.mp4', '.mov'), AVI ('.avi'), MPEG
('.mpg', '.mpeg')
Main Unit
• Power supply rating:
200V-240V 50/60Hz
• Power consumption: 18W
• Power consumption in standby mode
(Normal mode): <0.5W
• Power consumption in standby mode
(Quick Start mode): <5W
24
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Troubleshooting
If you experience any of the following difficulties while using this unit, check the list below
before consulting your nearest TOSHIBA dealer.
Problem
Tip
No reaction to the
remote control.
Connect the product to the power outlet.
Point the remote control at the product.
Insert the battery correctly.
Insert new battery in the remote control.
Turn on the TV.
No video signal on the
display device.
Set the TV to the correct external input.
Select the correct video resolution.
Set TV System of TV correctly.
Incorrect or no audio /
video signal on the
amplifier/display device
via HDMI cable.
If the unit is connected to the unauthorized display device with
an HDMI cable, the audio/video signal may not be output.
Ensure the amplifier/display devices setting match the Blu-ray
Disc™ player.
No high-definition video
signal on the TV.
Does the disc contain high-definition video? High-definition
video is not available when the disc does not contain it.
Does the TV support high-definition video? High-definition video
is not available when the TV does not support it.
No audio signal from the Turn on the audio system.
loudspeakers of the
Set the audio system to the correct external input.
audio system.
Increase the volume level of the audio system.
Cannot play back a disc.
Make sure that the Blu-ray Disc™ player supports the disc.
Make sure that the Blu-ray Disc™ player supports the region
code of the DVD or Blu-ray Disc™.
For DVD+RW/+R or DVD-RW/-R, make sure that the disc is
finalized.
Clean the disc.
Cannot play back JPEG
Make sure that the disc was recorded in the JPEG/ISO format.
files from a disc.
Cannot play MP3 files
Make sure that the disc was recorded in the ISO format.
from a disc.
Make sure that the bitrate of the MP3 files is between 8 and 320
kbps.
Make sure that the sample rate of the MP3 files is 32kHz,
44.1kHz or 48kHz.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot find a JPEG file.
Cannot find a MP3 file.
Cannot upgrade SW.
Make sure that the selected group (folder) does not contain
more than 9,999 files for DVD and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Make sure that the selected folder does not contain more than
9,999 files for DVD and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3.
When you upgrade the system with USB flash drive, you should
make a new folder named UPG_ALL, and copy the upgrade file
into this folder.
When you upgrade the system by network, please make sure
the player is connected to the internet when upgrading the SW.
Sometimes the options
of setup menu cannot
be selected.
When playing a DVD disc or Blu-ray Disc™, press STOP
button once, the player will go into stop resume mode,
meanwhile you cannot change some settings in setup menu
such as language subitem menu, audio, subtitle etc.
If you want to change that, press STOP button twice, the
player will go into full stop mode, then you can do it.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Glossary
Dolby® Digital
Aspect ratio
The system to compress digital sound
developed by Dolby Laboratories. It offers
you sound of stereo (2ch) or multichannel
audio.
Aspect ratio refers to the length to height
ratio of TV screens. The ratio of a standard
TV is 4:3, while the ratio of a high
definition or wide TV is 16:9. The letterbox
allows you to enjoy a picture with a wider
perspective on a standard 4:3 screen.
Dolby® Digital Plus
Dolby Digital Plus is the next generation
digital audio compression technology
developed as an extension to Dolby Digital.
Blu-ray Disc™ supports 7.1 multi-channel
surround sound output.
AVCHD™
AVCHD™ is a new format for high definition
video camcorders which can record and
play high-resolution HD images.
Dolby® TrueHD
AVI
Dolby TrueHD is a lossless coding
technology developed for next generation
optical discs. Blu-ray DiscTM supports 7.1
multi-channel surround sound output.
Audio Video Interleave, known by its
acronym AVI, is a multimedia container
ormat. AVI files can contain both audio
and video data in a file container that
allows synchronous audio-with-video
playback.
DTS®
DTS is a multi-channel surround sound
system. By connecting to DTS decoder,
you can enjoy movie dynamic and realistic
sound like movie theater. DTS surround
sound technologies were developed by
DTS, Inc.
BD-Java™
With some Blu-ray Disc™ which support
Java™ applications, you can enjoy the
interactive functions such as games or
interactive menus.
DTS-HD®
BD-Live™
DTS-HD is a lossless coding technology
developed as an extension of the original
DTS Coherent Acoustics format.
Blu-ray Disc™ supports 7.1 multi-channel
surround sound output.
BD-Live™ is a BD-video (BD-ROM version 2
Profile 2.0/Profile 1.1) which contains new
functions (e.g. Internet connection), in
addition to the BONUSVIEW™ function.
Blu-ray DiscTM
Blu-ray DiscTM is a next generation optical
video disc capable of storing five times
more data than a conventional DVD. The
large capacity makes it possible to benefit
from the features such as high-definition
videos, multichannel surround sound,
interactive menus and so on.
DTS-HD Master AudioTM
A disc encoded with DTS-HD Master Audio
delivers ALL of the information from the
original master recording — bit-for-bit, it's
identical to what the sound engineers laid
down. Audio doesn't get any better than
this.
BONUSVIEWTM
HDCP
This is a Blu-ray DiscTM-Video (Final
Standard Profile or Profile 1.1) that
supports interactive content encoded on
the disc, such as picture-in-picture. This
means you can play the primary video and
secondary video simultaneously.
High-bandwidth Digital Content Protection.
This is a specification that provides a
secure transmission of digital contents
between different devices (to prevent
unauthorized copyright.)
HDMI®
Chapter
High-Definition Multimedia Interface
(HDMI) is a high-speed digital interface
that can transmit uncompressed high
definition video and digital multichannel
audio. It delivers high quality picture and
sound quality. HDMI is fully backward
compatible with DVI. As required by the
HDMI standard, connecting to HDMI or
DVI products without HDCP (High
bandwidth Digital Content Protection) will
result in no Video or Audio output.
Just as a book is split up into several
chapters, a title on a Blu-ray Disc™-video
or DVD-video is usually divided into
chapters.
Digital Audio
Digital Audio is a sound signal that has
been converted into numerical values.
Digital sound can be transmitted through
multiple channels. Analogue sound can only
be transmitted through two channels.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PCM
IP Address
Pulse Code Modulation. A digital audio
encoding system.
A set of numbers which are assigned to
devices participating in a computer
network.
Region code
A system that allows discs to be played only
in the region designated. This unit only
plays discs that have compatible region
codes. You can find the region code of your
unit on the product label. Some discs are
compatible with more than one region (or
ALL regions).
JPEG
A very common digital still picture format.
A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in
image quality in spite of its high
compression ratio. Files are recognized by
their file extension ‘.jpg’ or ‘.jpeg’.
Sampling Frequency
The rate which sound is measured by a
specified interval to turn into digital audio
data. The numbers of sampling in one
second defines as sampling frequency. The
higher the rate, the better the sound
quality.
LAN (Local Area Network)
A group of linked devices in a company,
school or home. Indicates the boundaries of
a particular network.
Local storage
This storage area is used as destination for
storing additional contents from BD-Live™
enabled Blu-ray Disc™-Video.
Title
A collection of chapters on Blu-ray Disc™-
video or DVD-video.
MKV
Track
The Matroska Multimedia Container is an
open standard free container format, a file
format that can hold an unlimited number
of video, audio, picture or subtitle tracks
inside a single file. It is intended to serve
as a universal format for storing common
multimedia content, like movies or TV
shows.
Audio CD use tracks to divide up the content
of a disc. The Blu-ray Disc™-video or DVD-
video equivalent is called a chapter. See
also “Chapter”.
Wi-Fi
Wi-Fi or Wifi, is a mechanism for wirelessly
connecting electronic devices.
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. With the MP3 format, one CD-R or
CD-RW can contain about 10 times more
data than a regular CD.
MP4
MP4 file format is a multimedia container
format standard specified as a part of
MPEG-4. It is most commonly used to
store digital video and digital audio
streams, especially those defined by MPEG
(MPEG4, H264…) but can also be used to
store other data such as subtitles and still
images.
PBC
Playback Control. A system where you
navigate through a Video CD/Super VCD
with on-screen menus that are recorded
onto the disc. You can enjoy interactive
playback and search.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
License Information on the Software Used in This Product
This document is statement purpose only. Not concerned with operation of this
product.
The software pre-installed in this product consists of multiple, independent software components. Each software
component is copyrighted by a third party. This product uses software components that are distributed as freeware
under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
Some EULAs require that the source code of the applicable component be disclosed as the condition for distributing
the software component in executable format. You can check the software components subject to such EULA
requirements on the following e-mail address:
E-mail address: [email protected]
TOSHIBA provides a warranty for this product you have purchased under conditions set forth by TOSHIBA.
However, some of the software components distributed under an EULA are made available for use by the user
on the assumption that they are not copyrighted or warranted by a third party. These software components are
licensed to the user free of charge and therefore not covered by any warranty within the scope of the applicable
laws. These software components are not subject to any copyrights or other third-party rights and are provided in
“as is” condition without any warranty, whether express or implied. “Warranty” here includes, but not limited to, an
implied warranty for marketability or fitness for specific uses. All risks associated with the quality or performance
of these software components are assumed by the user. TOSHIBA shall not be liable whatsoever for any cost of
repair or correction or other incidental expense incurred in connection with a defect found in any of these software
components. Unless specified under the applicable laws or in a written agreement, a party who changes or
redistributes the software with consent from the copyright holders or based on the aforementioned licenses shall
not be held liable whatsoever for any loss arising from the use of or inability to use such software components.
The same applies even when the copyright holders or relevant third parties have been informed of the possibility of
such loss. “Loss” here includes normal, special, incidental and indirect loss (including, but not limited to, the loss of
data or its accuracy; loss incurred by the user or any third party; and interface incompatibility with other software).
Please read each EULA for details on the use conditions and items that must be observed regarding these software
components.
The table below lists the software components pre-installed in this product, which are subject to EULAs. The user
should read the applicable EULAs carefully before using these software components. The EULAs are exhibited in
their original text (English) as exactly written by the respective parties.
Project name
Linux kernel
SquashFS
iputils
Project license
GPLv2
GPLv2
GPLv2
GPLv2
GPLv2
GPLv2
GPLv2
GPLv2
LGPLv2
GPLv2
GPLv2
GPLv2
GPLv2
GPLv2
GPLv2
GPLv2
GPLv2
GPLv2
GPLv2
ncurses.txt
GPLv2
GPLv2
udhcpc
net-tools
sysvinit
module-init-tools
util-linux-ng
procps (ps, top)
psmisc
coreutils
gawk
grep
findutils
bash
tar
sed
gzip
inetutils
ncurses
gdb (gdbserver)
Das U-Boot
29
Download from Www.Somanuals.com. All Manuals Search And Download.
International Components for Unicode
ICULicense.txt
openssl.txt
OpenSSL
zlib
zlib.txt
FreeType
FreeType.txt
expat.txt
Expat
libcurl
libcurl.txt
libjpeg
libjpeg-7.txt
c-arse.txt
c-ares
mtd-utils
GPLv2
libmtp
LGPLv2.1
libusb
LGPLv2.1
libusb-compat
WPA Supplicant
WPA Supplicant (WPS)
Wireless Tools
DirectFB
LGPLv2.1
WPASupplicant.txt
WPASupplicant.txt
GPLv2
LGPLv2.1
Fusion
GPLv2
SaWMan
LGPLv2.1
libpng
libpng.txt
libxml2
libxml.txt (MIT License)
tinyxml.txt
tinyxml
David M. Gay's dtoa and strtod
Bison generated parser
Doug Lea's malloc
EMX sprintf and scanf
msdl
DMG's dtoa and strtod.txt
bison_parser.txt
dmalloc.txt
EMX_sprintf_sscanf.txt
GPLv2
JSON_Parser
JSON_Parser.txt
To protect your rights, we need to make restrictions that
forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the software,
or if you modify it.
GNU GPLv2
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
For example, if you distribute copies of such a program,
whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too,
receive or can get the source code. And you must show them
these terms so they know their rights.
Preamble
The licenses for most software are designed to take away
your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom
to share and change free software--to make sure the software
is free for all its users. This General Public License applies
to most of the Free Software Foundation's software and to
any other program whose authors commit to using it. (Some
other Free Software Foundation software is covered by the
GNU Lesser General Public License instead.) You can apply it
to your programs, too.
We protect your rights with two steps: (1) copyright the
software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make
certain that everyone understands that there is no warranty for
this free software. If the software is modified by someone else
and passed on, we want its recipients to know that what they
have is not the original, so that any problems introduced by
others will not reflect on the original authors' reputations.
When we speak of free software, we are referring to
freedom, not price. Our General Public Licenses are designed
to make sure that you have the freedom to distribute copies
of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that
you can change the software or use pieces of it in new free
programs; and that you know you can do these things.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a
free program will individually obtain patent licenses, in effect
making the program proprietary. To prevent this, we have
made it clear that any patent must be licensed for everyone's
free use or not licensed at all.
The precise terms and conditions for copying, distribution and
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of
derivative or collective works based on the Program.
modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
In addition, mere aggregation of another work not based on
the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does
not bring the other work under the scope of this License.
0. This License applies to any program or other work which
contains a notice placed by the copyright holder saying it may
be distributed under the terms of this General Public License.
The "Program", below, refers to any such program or work,
and a "work based on the Program" means either the Program
or any derivative work under copyright law: that is to say, a
work containing the Program or a portion of it, either verbatim
or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you".
3. You may copy and distribute the Program (or a work based
on it, under Section 2) in object code or executable form under
the terms of Sections 1 and 2 above provided that you also do
one of the following:
a) Accompany it with the complete corresponding machine-
readable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used
for software interchange; or,
Activities other than copying, distribution and modification are
not covered by this License; they are outside its scope. The act
of running the Program is not restricted, and the output from
the Program is covered only if its contents constitute a work
based on the Program (independent of having been made by
running the Program). Whether that is true depends on what
the Program does.
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to
be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
1. You may copy and distribute verbatim copies of the
Program's source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on
each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License
and to the absence of any warranty;and give any other
recipients of the Program a copy of this License along with
the Program.
c) Accompany it with the information you received as to the
offer to distribute corresponding source code. (This alternative
is allowed only for non-commercial distribution and only if you
received the program in object code or executable form with
such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of
the work for making modifications to it. For an executable
work, complete source code means all the source code for all
modules it contains, plus any associated interface definition
files, plus the scripts used to control compilation and installation
of the executable. However, as a special exception, the source
code distributed need not include anything that is normally
distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating
system on which the executable runs, unless that component
itself accompanies the executable.
You may charge a fee for the physical act of transferring a
copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or
any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the
terms of Section 1 above, provided that you also meet all of
these conditions:
a) You must cause the modified files to carry prominent
notices stating that you changed the files and the date of any
change.
If distribution of executable or object code is made by
offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place
counts as distribution of the source code, even though third
parties are not compelled to copy the source along with the
object code.
b) You must cause any work that you distribute or publish,
that in whole or in part contains or is derived from the Program
or any part thereof, to be licensed as a whole at no charge to
all third parties under the terms of this License.
4. You may not copy, modify, sublicense, or distribute the
Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute
the Program is void, and will automatically terminate your
rights under this License. However, parties who have received
copies, or rights, from you under this License will not have
their licenses terminated so long as such parties remain in full
compliance.
c) If the modified program normally reads commands
interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or
display an announcement including an appropriate copyright
notice and a notice that there is no warranty (or else, saying
that you provide a warranty) and that users may redistribute
the program under these conditions, and telling the user how to
view a copy of this License. (Exception: if the Program itself is
interactive but does not normally print such an announcement,
your work based on the Program is not required to print an
announcement.)
5. You are not required to accept this License, since you have
not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These
actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any
work based on the Program), you indicate your acceptance
of this License to do so, and all its terms and conditions for
copying, distributing or modifying the Program or works based
on it.
These requirements apply to the modified work as a whole.
If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms,
do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections
as part of a whole which is a work based on the Program,
the distribution of the whole must be on the terms of this
License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of
who wrote it.
6. Each time you redistribute the Program (or any work based
on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not
impose any further restrictions on the recipients' exercise of
31
Download from Www.Somanuals.com. All Manuals Search And Download.
the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.
AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE
QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.
7. If, as a consequence of a court judgment or allegation
of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court
order, agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the
Program at all. For example, if a patent license would not
permit royalty-free redistribution of the Program by all those
who receive copies directly or indirectly through you, then the
only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
If any portion of this section is held invalid or unenforceable
under any particular circumstance, the balance of the section
is intended to apply and the section as a whole is intended to
apply in other circumstances.
It is not the purpose of this section to induce you to infringe
any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose
of protecting the integrity of the free software distribution
system, which is implemented by public license practices.
Many people have made generous contributions to the wide
range of software distributed through that system in reliance
on consistent application of that system; it is up to the author/
donor to decide if he or she is willing to distribute software
through any other system and a licensee cannot impose that
choice.
LGPLv2.1
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of
this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also
counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]
This section is intended to make thoroughly clear what is
believed to be a consequence of the rest of this License.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General
Public Licenses are intended to guarantee your freedom to
share and change free software--to make sure the software is
free for all its users.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only
in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of
this License.
This license, the Lesser General Public License, applies to some
specially designated software packages--typically libraries--of
the Free Software Foundation and other authors who decide
to use it. You can use it too, but we suggest you first think
carefully about whether this license or the ordinary General
Public License is the better strategy to use in any particular
case, based on the explanations below.
9. The Free Software Foundation may publish revised and/
or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or
concerns.
When we speak of free software, we are referring to freedom
of use, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of
free software (and charge for this service if you wish); that you
receive source code or can get it if you want it; that you can
change the software and use pieces of it in new free programs;
and that you are informed that you can do these things.
Each version is given a distinguishing version number. If
the Program specifies a version number of this License which
applies to it and "any later version", you have the option of
following the terms and conditions either of that version or of
any later version published by the Free Software Foundation.
If the Program does not specify a version number of this
License, you may choose any version ever published by the
Free Software Foundation.
To protect your rights, we need to make restrictions that
forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the library or
if you modify it.
10. If you wish to incorporate parts of the Program into other
free programs whose distribution conditions are different, write
to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make exceptions for
this. Our decision will be guided by the two goals of preserving
the free status of all derivatives of our free software and of
promoting the sharing and reuse of software generally.
For example, if you distribute copies of the library, whether
gratis or for a fee, you must give the recipients all the
rights that we gave you. You must make sure that they,
too, receive or can get the source code. If you link other
code with the library, you must provide complete object
files to the recipients, so that they can relink them with the
library after making changes to the library and recompiling
it. And you must show them these terms so they know their
rights.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
32
Download from Www.Somanuals.com. All Manuals Search And Download.
We protect your rights with a two-step method: (1) we
copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the
library.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
0. This License Agreement applies to any software library or
other program which contains a notice placed by the copyright
holder or other authorized party saying it may be distributed
under the terms of this Lesser General Public License (also
called "this License").Each licensee is addressed as "you".
To protect each distributor, we want to make it very clear
that there is no warranty for the free library. Also, if the
library is modified by someone else and passed on, the
recipients should know that what they have is not the original
version, so that the original author's reputation will not be
affected by problems that might be introduced by others.
A "library" means a collection of software functions and/
or data prepared so as to be conveniently linked with
application programs (which use some of those functions
and data) to form executables.
Finally, software patents pose a constant threat to the
existence of any free program. We wish to make sure
that a company cannot effectively restrict the users of
a free program by obtaining a restrictive license from
a patent holder. Therefore, we insist that any patent
license obtained for a version of the library must be
consistent with the full freedom of use specified
in this license.
The "Library", below, refers to any such software library
or work which has been distributed under these terms. A
"work based on the Library" means either the Library or any
derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or
with modifications and/or translated straightforwardly into
another language. (Hereinafter, translation is included
without limitation in the term "modification".)
Most GNU software, including some libraries, is
covered by the ordinary GNU General Public License.
This license, the GNU Lesser General Public License,
applies to certain designated libraries, and
is quite different from the ordinary General Public License. We
use this license for certain libraries in order to permit linking
those libraries into non-free programs.
"Source code" for a work means the preferred form
of the work for making modifications to it. For a
library, complete source code means all the source
code for all modules it contains, plus any associated
interface definition files, plus the scripts used to
control compilation and installation of the library.
When a program is linked with a library, whether
statically or using a shared library, the combination of
the two is legally speaking a combined work, a derivative
of the original library. The ordinary General Public
License therefore permits such linking only if the
entire combination fits its criteria of freedom. The
Lesser General Public License permits more lax
criteria for linking other code with the library.
Activities other than copying, distribution and modification
are not covered by this License; they are outside its
scope. The act of running a program using the Library is
not restricted, and output from such a program is covered
only if its contents constitute a work based on the Library
(independent of the use of the Library in a tool for writing
it). Whether that is true depends on what the Library
does and what the program that uses the Library does.
We call this license the "Lesser" General Public License
because it does Less to protect the user's freedom than
the ordinary General Public License. It also provides
other free software developers Less of an advantage over
competing non-free programs. These disadvantages
are the reason we use the ordinary General Public
License for many libraries. However, the Lesser license
provides advantages in certain special circumstances.
1. You may copy and distribute verbatim copies of the
Library's complete source code as you receive it, in any
medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer
to this License and to the absence of any warranty; and
distribute a copy of this License along with the Library.
You may charge a fee for the physical act of
For example, on rare occasions, there may be a special
need to encourage the widest possible use of a certain
library, so that it becomes a de-facto standard. To
achieve this, non-free programs must be allowed to use
the library. A more frequent case is that a free library
does the same job as widely used non-free libraries.
transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or
any portion of it, thus forming a work based on the Library,
and copy and distribute such modifications or work under the
terms of Section 1 above, provided that you also meet all of
these conditions:
In this case, there is little to gain by limiting the free library
to free software only, so we use the Lesser General Public
License. In other cases, permission to use a particular library
in non-free programs enables a greater number of people to
use a large body of free software. For example, permission
to use the GNU C Library in non-free programs enables
many more people to use the whole GNU operating system,
as well as its variant, the GNU/Linux operating system.
a) The modified work must itself be a software
library.
b) You must cause the files modified to carry
prominent notices stating that you changed
the files and the date of any change.
c) You must cause the whole of the work to be licensed at
no charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function
or a table of data to be supplied by an application program
that uses the facility, other than as an argument passed
when the facility is invoked, then you must make a good faith
effort to ensure that, in the event an application does not
supply such function or table, the facility still operates, and
performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots
has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function
Although the Lesser General Public License is Less protective
of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and
the wherewithal to run that program using a modified version
of the Library.
The precise terms and conditions for copying, distribution
and modification follow. Pay close attention to the difference
between a "work based on the library" and a "work that
uses the library". The former contains code derived
from the library, whereas the latter must be combined
with the library in order to run.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
must be optional: if the application does not supply it, the
square root function must still compute square roots.)
for the work may be a derivative work of the Library
even though the source code is not. Whether this is true
is especially significant if the work can be linked without
the Library, or if the work is itself a library. The threshold
for this to be true is not precisely defined by law.
These requirements apply to the modified work as a
whole. If identifiable sections of that work are not derived
from the Library, and can be reasonably considered
independent and separate works in themselves, then this
License, and its terms, do not apply to those sections when
you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a
work based on the Library, the distribution of the whole
must be on the terms of this License, whose permissions
for other licensees extend to the entire whole, and thus
to each and every part regardless of who wrote it.
If such an object file uses only numerical parameters, data
structure layouts and accessors, and small macros and small
inline functions (ten lines or less in length), then the use
of the object file is unrestricted, regardless of whether it is
legally a derivative work. (Executables containing this object
code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library,
you may distribute the object code for the work under
the terms of Section 6.Any executables containing
that work also fall under Section 6, whether or not
they are linked directly with the Library itself.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution
of derivative or collective works based on the Library.
6. As an exception to the Sections above, you may
also combine or link a "work that uses the Library" with
the Library to produce a work containing portions of the
Library, and distribute that work under terms of your
choice, provided that the terms permit modification
of the work for the customer's own use and reverse
engineering for debugging such modifications.
In addition, mere aggregation of another work not based
on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does
not bring the other work under the scope of this License.
3. You may opt to apply the terms of the
ordinary GNU General Public License instead of
this License to a given copy of the Library.
To do this, you must alter all the notices that refer
to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this
License. (If a newer version than version 2 of the
ordinary GNU General Public License has appeared,
then you can specify that version instead if you wish.)
Do not make any other change in these notices.
You must give prominent notice with each copy of the work
that the Library is used in it and that the Library and its use
are covered by this License. You must supply a copy of this
License. If the work during execution displays copyright
notices, you must include the copyright notice for the Library
among them, as well as a reference directing the user to the
copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding
machine-readable source code for the Library including
whatever changes were used in the work (which must
be distributed under Sections 1 and 2 above); and, if
the work is an executable linked with the Library, with
the complete machine-readable "work that uses the
Library", as object code and/or source code, so that the
user can modify the Library and then relink to produce a
modified executable containing the modified Library. (It
is understood that the user who changes the contents of
definitions files in the Library will not necessarily be able to
recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking
with the Library. A suitable mechanism is one that (1)
uses at run time a copy of the library already present
on the user's computer system, rather than copying
library functions into the executable, and (2) will operate
properly with a modified version of the library, if the user
installs one, as long as the modified version is interface-
compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for
at least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no
Once this change is made in a given copy, it is
irreversible for that copy, so the ordinary GNU General
Public License applies to all subsequent copies
and derivative works made from that copy.
This option is useful when you wish to copy part of the
code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion
or derivative of it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2
above provided that you accompany it with the complete
corresponding machine-readable source code, which must
be distributed under the terms of Sections 1 and 2 above
on a medium customarily used for software interchange.
If distribution of object code is made by offering
access to copy from a designated place, then offering
equivalent access to copy the source code from the
same place satisfies the requirement to distribute the
source code, even though third parties are not compelled
to copy the source along with the object code.
more than the cost of performing this distribution.
5. A program that contains no derivative of any
portion of the Library, but is designed to work with
the Library by being compiled or linked with it, is
called a "work that uses the Library". Such a work, in
isolation, is not a derivative work of the Library, and
therefore falls outside the scope of this License.
d) If distribution of the work is made by offering access to
copy from a designated place, offer equivalent access to copy
the above specified materials from the same place.
e) Verify that the user has already received a copy of these
materials or that you have already sent this user a copy. For
an executable, the required form of the "work that uses the
Library" must include any data and utility programs needed
for reproducing the executable from it. However, as a special
exception, the materials to be distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
However, linking a "work that uses the Library" with
the Library creates an executable that is a derivative
of the Library (because it contains portions of the
Library), rather than a "work that uses the library". The
executable is therefore covered by this License. Section
6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from
a header file that is part of the Library, the object code
It may happen that this requirement contradicts the
license restrictions of other proprietary libraries that do
34
Download from Www.Somanuals.com. All Manuals Search And Download.
of that system; it is up to the author/donor to decide if
he or she is willing to distribute software through any
other system and a licensee cannot impose that choice.
not normally accompany the operating system. Such
a contradiction means you cannot use both them
and the Library together in an executable that you
distribute.
This section is intended to make thoroughly clear what is
believed to be a consequence of the rest of this License.
7. You may place library facilities that are a work based
on the Library side-by-side in a single library together with
other library facilities not covered by this License, and
distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other
library facilities is otherwise permitted, and provided that you
do these two things:
a) Accompany the combined library with a copy of the
same work based on the Library, uncombined with any
other library facilities. This must be distributed under the
terms of the Sections above.
12. If the distribution and/or use of the Library is restricted
in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the
Library under this License may add an explicit geographical
distribution limitation excluding those countries, so that
distribution is permitted only in or among countries not
thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised
and/or new versions of the Lesser General Public
License from time to time. Such new versions will be
similar in spirit to the present version, but may differ
in detail to address new problems or concerns.
b) Give prominent notice with the combined
library of the fact that part of it is a work based
on the Library, and explaining where to find the
accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or
distribute the Library except as expressly provided under
this License. Any attempt otherwise to copy, modify,
sublicense, link with, or distribute the Library is void, and
will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from
you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
Each version is given a distinguishing version number. If
the Library specifies a version number of this License
which applies to it and "any later version", you have the
option of following the terms and conditions either of
that version or of any later version published by the Free
Software Foundation. If the Library does not specify
a license version number, you may choose any version
ever published by the Free Software Foundation.
9. You are not required to accept this License, since
you have not signed it. However, nothing else grants
you permission to modify or distribute the Library or its
derivative works. These actions are prohibited by law if
you do not accept this License. Therefore, by modifying or
distributing the Library (or any work based on the Library),
you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or
modifying the Library or works based on it.
14. If you wish to incorporate parts of the Library into
other free programs whose distribution conditions are
incompatible with these, write to the author to ask for
permission. For software which is copyrighted by the
Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the
free status of all derivatives of our free software and of
promoting the sharing and reuse of software generally.
NO WARRANTY
10. Each time you redistribute the Library (or any work
based on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link with
or modify the Library subject to these terms and conditions.
You may not impose any further restrictions on the recipients'
exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties with this License.
15. BECAUSE THE LIBRARY IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE
OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
11. If, as a consequence of a court judgment or allegation
of patent infringement or for any other reason (not limited
to patent issues), conditions are imposed on you (whether
by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the
conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and
any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent
license would not permit royalty-free redistribution of the
Library by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution
of the Library.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE
LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/
OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE,
BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER
SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
If any portion of this section is held invalid or unenforceable
under any particular circumstance, the balance of
the section is intended to apply, and the section as a
whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to
infringe any patents or other property right claims or
to contest validity of any such claims; this section has
the sole purpose of protecting the integrity of the free
software distribution system which is implemented by
public license practices. Many people have made generous
contributions to the wide range of software distributed
through that system in reliance on consistent application
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2011 International Business Machines
Corporation and others
35
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Redistributions of any form whatsoever must retain the
following acknowledgment: "This product includes software
developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/)"
All rights reserved.
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify,
merge, publish, distribute, and/or sell copies of the Software,
and to permit persons to whom the Software is furnished to
do so, provided that the above copyright notice(s) and this
permission notice appear in all copies of the Software and that
both the above copyright notice(s) and this permission notice
appear in supporting documentation.
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT
"AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUTNOTLIMITEDTO, THEIMPLIEDWARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A
PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITEDTOTHEWARRANTIESOFMERCHANTABILITY,FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF
THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE
LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR
CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
This product includes cryptographic software written by Eric
written by Tim Hudson ([email protected]).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
Except as contained in this notice, the name of a copyright
holder shall not be used in advertising or otherwise to promote
the sale, use or other dealings in this Software without prior
written authorization of the copyright holder.
This package is an SSL implementation written by Eric Young
([email protected]). The implementation was written so as to
conform with Netscapes SSL.
openssl
LICENSE ISSUES
This library is free for commercial and non-commercial use as
long as the following conditions are adhered to. The following
conditions apply to all code found in this distribution, be it the
RC4, RSA, lhash, DES, etc., code; not just the SSL code. The
SSL documentation included with this distribution is covered by
the same copyright terms except that the holder is Tim Hudson
The OpenSSL toolkit stays under a dual license, i.e. both the
conditions of the OpenSSL License and the original SSLeay
license apply to the toolkit. See below for the actual license
texts. Actually both licenses are BSD-style Open Source
licenses. In case of any license issues related to OpenSSL
please contact [email protected].
Copyright remains Eric Young's, and as such any Copyright
notices in the code are not to be removed. If this package
is used in a product, Eric Young should be given attribution
as the author of the parts of the library used. This can be
in the form of a textual message at program startup or in
documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
OpenSSL License
Copyright (c) 1998-2008 The OpenSSL Project. All rights
reserved.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
1. Redistributions of source code must retain the copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
3. All advertising materials mentioning features or use of this
software must display the following acknowledgement: "This
product includes cryptographic software written by Eric Young
([email protected])" The word 'cryptographic' can be left out
if the routines from the library being used are not cryptographic
related :-).
3. All advertising materials mentioning features or use of this
software must display the following acknowledgment:"This
product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must
not be used to endorse or promote products derived from
this software without prior written permission. For written
permission, please contact [email protected].
4. If you include any Windows specific code (or a derivative
thereof) from the apps directory (application code) you must
include an acknowledgement: "This product includes software
written by Tim Hudson ([email protected])"
5. Products derived from this software may not be called
"OpenSSL" nor may "OpenSSL" appear in their names without
prior written permission of the OpenSSL Project.
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
36
Download from Www.Somanuals.com. All Manuals Search And Download.
full form, without having to pay us. (`royalty-free' usage)
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
You may not pretend that you wrote this software. If you
use it, or only parts of it, in a program, you must acknowledge
somewhere in your documentation that you have used the
FreeType code. (`credits')
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
We specifically permit and encourage the inclusion of
this software, with or without modifications, in commercial
products. We disclaim all warranties covering The FreeType
Project and assume no liability related to The FreeType
Project.
The licence and distribution terms for any publically available
version or derivative of this code cannot be changed. i.e.
this code cannot simply be copied and put under another
distribution licence [including the GNU Public Licence.]
Finally, many people asked us for
a credit/disclaimer to use in compliance with this license. We
thus encourage you to use the following text:
a
preferred form for
zlib
"""
Portions of this software are copyright © <year> The
FreeType Project (www.freetype.org). All rights reserved.
zlib.h -- interface of the 'zlib' general purpose compression
library
version 1.2.3, July 18th, 2005
"""
Please replace <year> with the value from the FreeType
version you actually use.
Legal Terms
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or
implied warranty. In no event will the authors be held liable for
any damages arising from the use of this software.
===========
0. Definitions
Permission is granted to anyone to use this software for any
purpose, including commercial applications, and to alter it and
redistribute it freely, subject to the following restrictions:
Throughout this license, the terms `package', `FreeType
Project', and `FreeType archive' refer to the set of files
originally distributed by the authors (David Turner, Robert
Wilhelm, and Werner Lemberg) as the `FreeType Project', be
they named as alpha, beta or final release.
1. The origin of this software must not be misrepresented; you
must not claim that you wrote the original software. If you use
this software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and
must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source
distribution.
`You' refers to the licensee, or person using the project,
where`using' is a generic term including compiling the project's
source code as well as linking it to form a `program' or
`executable'.
This program is referred to as `a program using the
FreeType engine'.
Jean-loup Gailly [email protected]
Mark Adler [email protected]
This license applies to all files distributed in the original
FreeType Project, including all source code, binaries and
documentation, unless otherwise stated in the file in its
The FreeType Project LICENSE
original, unmodified form as
distributed in the original
2006-Jan-27
archive.
If you are unsure whether or not a particular file is covered
by this license, you must contact us to verify this.
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm,
and Werner Lemberg
The FreeType Project is copyright (C) 1996-2000 by David
Turner, Robert Wilhelm, and Werner Lemberg. All rights
reserved except as specified below.
Introduction
============
The FreeType Project is distributed in several archive
packages;
1. No Warranty
some of them may contain, in addition to the FreeType font
engine,various tools and contributions which rely on, or relate
to, the FreeType Project.
THE FREETYPE PROJECT IS PROVIDED `AS IS'
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. IN NO EVENT WILL
ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE
LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR
THE INABILITY TO USE, OF THE FREETYPE PROJECT.
This license applies to all files found in such packages,
and which do not fall under their own explicit license. The
license affects thus the FreeType font engine, the test
programs,documentation and makefiles, at the very least.
This license was inspired by the BSD, Artistic, and
IJG (Independent JPEG Group) licenses, which all encourage
inclusion and use of free software in commercial and
freeware products alike. As a consequence, its main points
are that:
2. Redistribution
This license grants
a
worldwide, royalty-free, perpetual
and irrevocable right and license to use, execute, perform,
compile,display, copy, create derivative works of, distribute
and sublicense the FreeType Project (in both source and
object code forms) and derivative works thereof for any
purpose; and to authorize others to exercise some or all of
the rights granted herein, subject to the following conditions:
We don't promise that this software works. However, we will
be interested in any kind of bug reports. (`as is' distribution)
You can use this software for whatever you want, in parts or
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Redistribution of source code must retain this license
file (`FTL.TXT') unaltered; any additions, deletions or
changes to the original files must be clearly indicated in
accompanying documentation. The copyright notices of the
unaltered,original files must be preserved in all copies of
source files.
LIMITEDTOTHEWARRANTIESOFMERCHANTABILITY,FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
Redistribution in binary form must provide a disclaimer
that states that the software is based in part of the work of
the FreeType Team, in the distribution documentation. We
also encourage you to put an URL to the FreeType web page in
your documentation, though this isn't mandatory.
curl
COPYRIGHT AND PERMISSION NOTICE
These conditions apply to any software derived from or
based on the FreeType Project, not just the unmodified files. If
you use our work, you must acknowledge us. However, no fee
need be paid to us.
Copyright (c) 1996 - 2011, Daniel Stenberg, <daniel@haxx.
se>.
All rights reserved.
3. Advertising
Permission to use, copy, modify, and distribute this software for
any purpose with or without fee is hereby granted, provided
that the above copyright notice and this permission notice
appear in all copies.
Neither the FreeType authors and contributors nor you shall
use the name of the other for commercial, advertising, or
promotional purposes without specific prior written permission.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITEDTOTHEWARRANTIESOFMERCHANTABILITY,FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF
THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
We suggest, but do not require, that you use one or
more of the following phrases to refer to this software in
your documentation or advertising materials: `FreeType
Project', `FreeType Engine', `FreeType library', or `FreeType
Distribution'.
As you have not signed this license, you are not required to
accept it. However, as the FreeType Project is copyrighted
material, only this license, or another one contracted with the
authors, grants you the right to use, distribute, and modify
it.
Therefore, by using, distributing, or modifying the
FreeType Project, you indicate that you understand and accept
all the terms of this license.
Except as contained in this notice, the name of a copyright
holder shall not
be used in advertising or otherwise to promote the sale, use
or other dealings
in this Software without prior written authorization of the
copyright holder.
4. Contacts
There are two mailing lists related to FreeType:
libjpeg-7
1. We don't promise that this software works. (But if you find
any bugs,please let us know!)
Discusses general use and applications of FreeType, as well as
future and wanted additions to the library and distribution.
If you are looking for support, start in this list if you
haven't found anything to help you in the documentation.
2. You can use this software for whatever you want. You don't
have to pay us.
3. You may not pretend that you wrote this software. If you
use it in a program, you must acknowledge somewhere in your
documentation that you've used the IJG code.
In legalese:
Discusses bugs, as well as engine internals,design issues,
specific licenses, porting, etc. Our home page can be found at
The authors make NO WARRANTY or representation, either
express or implied,with respect to this software, its quality,
accuracy, merchantability, or fitness for a particular purpose.
This software is provided "AS IS", and you, its user, assume the
entire risk as to its quality and accuracy.
Expat
Copyright (c) 1998, 1999, 2000 Thai Open Source
Software Center Ltd and Clark Cooper Copyright (c) 2001,
2002, 2003, 2004, 2005, 2006 Expat maintainers.
This software is copyright (C) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the Software), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell copies of
the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
Permission is hereby granted to use, copy, modify, and
distribute this software (or portions thereof) for any purpose,
without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed,
then this README file must be included, with this copyright
and no-warranty notice unaltered; and any additions, deletions,
or changes to the original files must be clearly indicated in
accompanying documentation.
(2)Ifonlyexecutablecodeisdistributed, thentheaccompanying
documentation must state that "this software is based in part
on the work of the Independent JPEG Group".
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
(3) Permission for use of this software is granted only if the user
38
Download from Www.Somanuals.com. All Manuals Search And Download.
accepts full responsibility for any undesirable consequences;
the authors accept NO LIABILITY for damages of any kind.
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
These conditions apply to any software derived from or based
on the IJG code, not just to the unmodified library. If you use
our work, you ought to acknowledge us.
The licenses for most software and other practical works are
designed to take away your freedom to share and change the
works. By contrast, the GNU General Public License is intended
to guarantee your freedom to share and change all versions
of a program--to make sure it remains free software for all its
users. We, the Free Software Foundation, use the GNU General
Public License for most of our software; it applies also to any
other work released this way by its authors. You can apply it
to your programs, too.
Permission is NOT granted for the use of any IJG author's name
or company name in advertising or publicity relating to this
software or products derived from it. This software may be
referred to only as "the Independent JPEG Group's software".
We specifically permit and encourage the use of this software
as the basis of commercial products, provided that all warranty
or liability claims are assumed by the product vendor.
When we speak of free software, we are referring to freedom,
not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free
software (and charge for them if you wish), that you receive
source code or can get it if you want it, that you can change
the software or use pieces of it in new free programs, and that
you know you can do these things.
ansi2knr.c is included in this distribution by permission of L.
Peter Deutsch, sole proprietor of its copyright holder, Aladdin
Enterprises of Menlo Park, CA. ansi2knr.c is NOT covered
by the above copyright and conditions, but instead by the
usual distribution terms of the Free Software Foundation;
principally,that you must include source code if you redistribute
it. (See the file ansi2knr.c for full details.) However, since
ansi2knr.c is not needed as part of any program generated from
the IJG code, this does not limit you more than the foregoing
paragraphs do.
To protect your rights, we need to prevent others from
denying you these rights or asking you to surrender the rights.
Therefore, you have certain responsibilities if you distribute
copies of the software, or if you modify it: responsibilities to
respect the freedom of others.
For example, if you distribute copies of such a program,
whether gratis or for a fee, you must pass on to the recipients
the same freedoms that you received. You must make sure
that they, too, receive or can get the source code. And you
must show them these terms so they know their rights.
The Unix configuration script "configure" was produced with
GNU Autoconf. It is copyright by the Free Software Foundation
but is freely distributable. The same holds for its supporting
scripts (config.guess, config.sub,ltconfig, ltmain.sh). Another
support script, install-sh, is copyright by X Consortium. but is
also freely distributable.
Developers that use the GNU GPL protect your rights with
two steps: (1) assert copyright on the software, and (2) offer
you this License giving you legal permission to copy, distribute
and/or modify it.
The IJG distribution formerly included code to read and write
GIF files. To avoid entanglement with the Unisys LZW patent,
GIF reading support has been removed altogether, and the GIF
writer has been simplified to produce uncompressed GIFs. This
technique does not use the LZW algorithm; the resulting GIF
files are larger than usual, but are readable by all standard
GIF decoders.
For the developers' and authors' protection, the GPL clearly
explains that there is no warranty for this free software. For
both users' and authors' sake, the GPL requires that modified
versions be marked as changed, so that their problems will not
be attributed erroneously to authors of previous versions.
We are required to state that "The Graphics
Interchange Format(c) is the Copyright property
of CompuServe Incorporated. GIF(sm) is a Service
Mark property of CompuServe Incorporated."
Some devices are designed to deny users access to install or
run modified versions of the software inside them, although the
manufacturercandoso. Thisisfundamentallyincompatiblewith
the aim of protecting users' freedom to change the software.
The systematic pattern of such abuse occurs in the area of
products for individuals to use, which is precisely where it is
most unacceptable. Therefore, we have designed this version
of the GPL to prohibit the practice for those products. If such
problems arise substantially in other domains, we stand ready
to extend this provision to those domains in future versions of
the GPL, as needed to protect the freedom of users.
c-ares
Copyright 1998 by the Massachusetts Institute of Technology.
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is
hereby granted, provided that the above copyright notice
appear in all copies and that both that copyright notice and this
permission notice appear in supporting documentation, and
that the name of M.I.T. not be used in advertising or publicity
pertaining to distribution of the software without specific,
written prior permission. M.I.T. makes no representations
about the suitability of this software for any purpose. It is
provided "as is" without express or implied warranty.
Finally, every program is threatened constantly by software
patents. States should not allow patents to restrict development
and use of software on general-purpose computers, but in
those that do, we wish to avoid the special danger that patents
applied to a free program could make it effectively proprietary.
To prevent this, the GPL assures that patents cannot be used
to render the program non-free.
GPLv3
GNU GENERAL PUBLIC LICENSE
The precise terms and conditions for copying, distribution and
modification follow.
Version 3, 29 June 2007
TERMS AND CONDITIONS
Copyright (C) 2007 Free Software Foundation, Inc. <http://
fsf.org/>
0. Definitions.
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
"This License" refers to version 3 of the GNU General Public
License.
"Copyright" also means copyright-like laws that apply to other
kinds of works, such as semiconductor masks.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
"The Program" refers to any copyrightable work licensed under
this License. Each licensee is addressed as "you". "Licensees"
and "recipients" may be individuals or organizations.
in source code form is that same work.
2. Basic Permissions.
To "modify" a work means to copy from or adapt all or part
of the work in a fashion requiring copyright permission, other
than the making of an exact copy. The resulting work is called
a "modified version" of the earlier work or a work "based on"
the earlier work.
All rights granted under this License are granted for the term
of copyright on the Program, and are irrevocable provided the
stated conditions are met. This License explicitly affirms your
unlimited permission to run the unmodified Program. The
output from running a covered work is covered by this License
only if the output, given its content, constitutes a covered
work. This License acknowledges your rights of fair use or
other equivalent, as provided by copyright law.
A "covered work" means either the unmodified Program or a
work based on the Program.
To "propagate" a work means to do anything with it that,
without permission, would make you directly or secondarily
liable for infringement under applicable copyright law, except
You may make, run and propagate covered works that you
do not convey, without conditions so long as your license
otherwise remains in force. You may convey covered works to
others for the sole purpose of having them make modifications
exclusively for you, or provide you with facilities for running
those works, provided that you comply with the terms of this
License in conveying all material for which you do not control
copyright. Those thus making or running the covered works for
you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any
copies of your copyrighted material outside their relationship
with you.
executing it on
a
computer or modifying
a
private copy.
Propagation includes copying, distribution (with or without
modification), making available to the public, and in some
countries other activities as well.
To "convey" a work means any kind of propagation that enables
other parties to make or receive copies. Mere interaction with
a user through a computer network, with no transfer of a copy,
is not conveying.
An interactive user interface displays "Appropriate Legal
Conveying under any other circumstances is permitted solely
under the conditions stated below. Sublicensing is not allowed;
section 10 makes it unnecessary.
Notices" to the extent that it includes
a
convenient and
prominently visible feature that (1) displays an appropriate
copyright notice, and (2) tells the user that there is no
warranty for the work (except to the extent that warranties
are provided), that licensees may convey the work under this
License, and how to view a copy of this License. If the interface
presents a list of user commands or options, such as a menu, a
prominent item in the list meets this criterion.
3. Protecting Users' Legal Rights From Anti-Circumvention
Law.
No covered work shall be deemed part of an effective
technological measure under any applicable law fulfilling
obligations under article 11 of the WIPO copyright treaty
adopted on 20 December 1996, or similar laws prohibiting or
restricting circumvention of such measures.
1. Source Code.
The "source code" for a work means the preferred form of the
work for making modifications to it. "Object code" means any
non-source form of a work.
When you convey a covered work, you waive any legal power
to forbid circumvention of technological measures to the extent
such circumvention is effected by exercising rights under this
License with respect to the covered work, and you disclaim
any intention to limit operation or modification of the work as
a means of enforcing, against the work's users, your or third
parties' legal rights to forbid circumvention of technological
measures.
A "Standard Interface" means an interface that either is an
official standard defined by a recognized standards body, or, in
the case of interfaces specified for a particular programming
language, one that is widely used among developers working
in that language.
The "System Libraries" of an executable work include anything,
other than the work as a whole, that (a) is included in the
normal form of packaging a Major Component, but which is not
part of that Major Component, and (b) serves only to enable
use of the work with that Major Component, or to implement a
Standard Interface for which an implementation is available to
the public in source code form. A "Major Component", in this
context, means a major essential component (kernel, window
system, and so on) of the specific operating system (if any) on
which the executable work runs, or a compiler used to produce
the work, or an object code interpreter used to run it. The
"Corresponding Source" for a work in object code form means
all the source code needed to generate, install, and (for an
executable work) run the object code and to modify the work,
including scripts to control those activities. However, it does
not include the work's System Libraries, or general-purpose
tools or generally available free programs which are used
unmodified in performing those activities but which are not
part of the work. For example, Corresponding Source includes
interface definition files associated with source files for the
work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to
require, such as by intimate data communication or control flow
between those subprograms and other parts of the work.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source
code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an
appropriate copyright notice; keep intact all notices stating that
this License and any non-permissive terms added in accord
with section 7 apply to the code; keep intact all notices of the
absence of any warranty; and give all recipients a copy of this
License along with the Program.
You may charge any price or no price for each copy that
you convey, and you may offer support or warranty protection
for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the
modifications to produce it from the Program, in the form of
source code under the terms of section 4, provided that you
also meet all of these conditions:
a) The work must carry prominent notices stating that you
modified it, and giving a relevant date.
The Corresponding Source need not include anything that
users can regenerate automatically from other parts of the
Corresponding Source. The Corresponding Source for a work
40
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under
Download from Www.Somanuals.com. All Manuals Search And Download.
section 7. This requirement modifies the requirement in section
to the general public at no charge under subsection 6d.
4 to "keep intact all notices".
A separable portion of the object code, whose source code is
excluded from the Corresponding Source as a System Library,
need not be included in conveying the object code work.
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section
7 additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
A "User Product" is either (1) a "consumer product", which
means any tangible personal property which is normally
used for personal, family, or household purposes, or (2)
anything designed or sold for incorporation into a dwelling.
In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For
a particular product received by a particular user, "normally
used" refers to a typical or common use of that class of
product, regardless of the status of the particular user or of
the way in which the particular user actually uses, or expects
or is expected to use, the product. A product is a consumer
product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such
uses representthe only significant mode of use of the product.
d) If the work has interactive user interfaces, each must
display Appropriate Legal Notices; however, if the Program
has interactive interfaces that do not display Appropriate Legal
Notices, your work need not make them do so.
A compilation of a covered work with other separate and
independentworks, which are not by their nature extensions
of the covered work,and which are not combined with it
such as to form a larger program, in or on a volume of a
storage or distribution medium, is called an "aggregate"
if the compilation and its resulting copyright are not used
to limit the access or legal rights of the compilation's
users beyond what the individual works permit. Inclusion
of a covered work in an aggregate does not cause this
License to apply to the other parts of the aggregate.
"Installation Information" for a User Product means
any methods, procedures, authorization keys, or other
information required to install and execute modified versions
of a covered work in that User Product from a modified
version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the
modified object code is in no case prevented or interfered
with solely because modification has been made.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form
under the terms of sections 4 and 5, provided that you
also convey the machine-readable Corresponding Source
under the terms of this License, in one of these ways:
If you convey an object code work under this section in,
or with, or specifically for use in, a User Product, and the
conveying occurs as part of a transaction in which the right
of possession and use of the User Product is transferred to
the recipient in perpetuity or for a fixed term (regardless of
how the transaction is characterized), the Corresponding
Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does
not apply if neither you nor any third party retains the
ability to install modified object code on the User Product
(for example, the work has been installed in ROM).
a) Convey the object code in, or embodied in, a physical
product (including a physical distribution medium),
accompanied by the Corresponding Source fixed on a durable
physical medium customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical
product (including a physical distribution medium),
accompanied by a written offer, valid for at least three
years and valid for as long as you offer spare parts or
customer support for that product model, to give anyone
who possesses the object code either (1) a copy of the
Corresponding Source for all the software in the product
that is covered by this License, on a durable physical
medium customarily used for software interchange, for
a price no more than your reasonable cost of physically
performing this conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
The requirement to provide Installation Information does not
include a requirement to continue to provide support service,
warranty, or updates for a work that has been modified or
installed by the recipient, or for the User Product in which it
has been modified or installed. Access to a network may be
denied when the modification itself materially and adversely
affects the operation of the network or violates the rules
and protocols for communication across the network.
Corresponding Source conveyed, and Installation Information
provided, in accord with this section must be in a format that
is publicly documented (and with an implementation available
to the public in source code form), and must require no
special password or key for unpacking, reading or copying.
c) Convey individual copies of the object code with a
copy of the written offer to provide the Corresponding
Source. This alternative is allowed only occasionally and
noncommercially, and only if you received the object
code with such an offer, in accord with subsection 6b.
7. Additional Terms.
d) Convey the object code by offering access from a
designated place (gratis or for a charge), and offer equivalent
access to the Corresponding Source in the same way through
the same place at no further charge. You need not require
recipients to copy the Corresponding Source along with the
object code. If the place to copy the object code is a network
server, the Corresponding Source may be on a different server
(operated by you or a third party) that supports equivalent
copying facilities, provided you maintain clear directions next
to the object code saying where to find the Corresponding
Source. Regardless of what server hosts the Corresponding
Source, you remain obligated to ensure that it is available
for as long as needed to satisfy these requirements.
"Additional permissions" are terms that supplement the
terms of this License by making exceptions from one or more
of its conditions. Additional permissions that are applicable
to the entire Program shall be treated as though they were
included in this License, to the extent that they are valid
under applicable law. If additional permissions apply only to
part of the Program, that part may be used separately under
those permissions, but the entire Program remains governed
by this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at
your optionremove any additional permissions from that
copy, or from any part of it. (Additional permissions may be
written to require their own removal in certain cases when
you modify the work.) You may place additional permissions
on material, added by you to a covered work, for which
e) Convey the object code using peer-to-peer transmission,
provided you inform other peers where the object code
and Corresponding Source of the work are being offered
41
Download from Www.Somanuals.com. All Manuals Search And Download.
you have or can give appropriate copyright permission.
reinstated, you do not qualify to receive new licenses
for the same material under section 10.
Notwithstanding any other provision of this License,
for material you add to a covered work, you may (if
authorized by the copyright holders of that material)
supplement the terms of this License with terms:
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to
receive or run a copy of the Program. Ancillary propagation
of a covered work occurring solely as a consequence of using
peer-to-peer transmission to receive a copy likewise does not
require acceptance. However, nothing other than this License
grants you permission to propagate or modify any covered
work. These actions infringe copyright if you do not accept
this License. Therefore, by modifying or propagating acovered
work, you indicate your acceptance of this License to do so.
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices
or author attributions in that material or in the Appropriate
Legal Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material,
or requiring that modified versions of such material be marked
in reasonable ways as different from the original version; or
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient
automatically receives a license from the original licensors, to
run, modify and propagate that work, subject to this License.
d) Limiting the use for publicity purposes of names of licensors
or authors of the material; or
e) Declining to grant rights under trademark law for use of
some trade names, trademarks, or service marks; or
You are not responsible for enforcing compliance by
third parties with this License. An "entity transaction" is
a transaction transferring control of an organization, or
substantially all assets of one, or subdividing an organization,
or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives
whatever licenses to the work the party's predecessor in
interest had or could give under the previous paragraph,
plus a right to possession of the Corresponding Source
of the work from the predecessor in interest, if the
predecessor has it or can get it with reasonable efforts.
f) Requiring indemnification of licensors and authors
of that material by anyone who conveys the material (or
modified versions of it) with contractual assumptions of
liability to the recipient, for any liability that these contractual
assumptions directly impose on those licensors and authors.
All other non-permissive additional terms are considered
"furtherrestrictions" within the meaning of section 10. If
the Program as you received it, or any part of it, contains a
notice stating that it is governed by this License along with
a term that is a further restriction, you may remove that
term. If a license document contains a further restriction
but permits relicensing or conveying under this License,
you may add to a covered work material governed by the
terms of that license document, provided that the further
restriction does not survive such relicensing or conveying.
You may not impose any further restrictions on the exercise
of therights granted or affirmed under this License. For
example, you may not impose a license fee, royalty, or
other charge for exercise of rights granted under this
License, and you may not initiate litigation (including a
cross-claim or counterclaim in a lawsuit) alleging that any
patent claim is infringed by making, using, selling, offering
for sale, or importing the Program or any portion of it.
If you add terms to a covered work in accord with this
section, you must place, in the relevant source files, a
statement of the additional terms that apply to those files,
or a notice indicating where to find the applicable terms.
11. Patents.
A "contributor" is a copyright holder who authorizes
use under this License of the Program or a work on
which the Program is based. The work thus licensed
is called the contributor's "contributor version".
Additional terms, permissive or non-permissive, may be
stated in the form of a separately written license, or stated
as exceptions; the above requirements apply either way.
8. Termination.
A contributor's "essential patent claims" are all patent
claims owned or controlled by the contributor, whether
already acquired or hereafter acquired, that would be
infringed by some manner, permitted by this License,
of making, using, or selling its contributor version, but
do not include claims that would be infringed only as a
consequence of further modification of the contributor
version. For purposes of this definition, "control"
includes the right to grant patent sublicenses in a manner
consistent with the requirements of this License.
You may not propagate or modify a covered work except as
expressly provided under this License. Any attempt otherwise
to propagate or modify it is void, and will automatically
terminate your rights under this License (including any
patent licenses granted under the third paragraph of section
11). However, if you cease all violation of this License, then
yourlicense from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly
and finally terminates your license, and (b) permanently, if
the copyright holder fails to notify you of the violation by
some reasonable means prior to 60 days after the cessation.
Each contributor grants you a non-exclusive,
worldwide, royalty-free patent license under the
contributor's essential patent claims, to make, use, sell,
offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you
of the violation by some reasonable means, this is the first
time you have received notice of violation of this License
(for any work) from that copyright holder, and you cure the
violation prior to 30 days after your receipt of the notice.
In the following three paragraphs, a "patent license"
is any express agreement or commitment, however
denominated, not to enforce a patent (such as an express
permission to practice a patent or covenant not to sue
for patent infringement). To "grant" such a patent
license to a party means to make such an agreement or
commitment not to enforce a patent against the party.
Termination of your rights under this section does
not terminate thelicenses of parties who have received
copies or rights from you under this License. If your
rights have been terminated and not permanently
42
Download from Www.Somanuals.com. All Manuals Search And Download.
If you convey a covered work, knowingly relying on a patent
license, and the Corresponding Source of the work is not
available for anyone to copy, free of charge and under the
terms of this License, through a publicly available network
server or other readily accessible means, then you must either
(1) cause the Corresponding Source to be so available, or
(2) arrange to deprive yourself of the benefit of the patent
license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend
the patent license to downstream recipients. "Knowingly
relying" means you have actual knowledge that, but for
the patent license, your conveying the covered work in a
country, or your recipient's use of the covered work in a
country, would infringe one or more identifiable patents in
that country that you have reason to believe are valid.
14. Revised Versions of this License.
The Free Software Foundation may publish revised
and/or new versions of the GNU General Public
License from time to time. Such new versions will be
similar in spirit to the present version, but may differ
in detail to address new problems or concerns.
Each version is given a distinguishing version number. If
the Program specifies that a certain numbered version
of the GNU General Public License "or any later version"
applies to it, you have the option of following the terms
and conditions either of that numbered version or of any
later version published by the Free Software Foundation.
If the Program does not specify a version number of the
GNU General Public License, you may choose any version
ever published by the Free Software Foundation.
If, pursuant to or in connection with a single transaction
orarrangement, you convey, or propagate by procuring
conveyance of, a covered work, and grant a patent
license to some of the parties receiving the covered
work authorizing them to use, propagate, modify or
convey a specific copy of the covered work, then the
patent license you grant is automatically extended to all
recipients of the covered work and works based on it.
If the Program specifies that a proxy can decide
which future versions of the GNU General Public
License can be used, that proxy's public statement
of acceptance of a version permanently authorizes
you to choose that version for the Program.
Later license versions may give you additional or
different permissions. However, no additional obligations
are imposed on any author or copyright holder as a
result of your choosing to follow a later version.
A patent license is "discriminatory" if it does not include
within the scope of its coverage, prohibits the exercise of,
or is conditioned on the non-exercise of one or more of the
rights that are specifically granted under this License. You
may not convey a covered work if you are a party to an
arrangement with a third party that is in the business of
distributing software, under which you make payment to the
third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of
the parties who would receive the covered work from you,
a discriminatory patent license (a) in connection with copies
of the covered work conveyed by you (or copies made from
those copies), or (b) primarily for and in connection with
specific products or compilations that contain the covered
work, unless you entered into that arrangement, or that
patent license was granted, prior to 28 March 2007.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
Nothing in this License shall be construed as excluding or
limiting any implied license or other defenses to infringement
that may otherwise be available to you under applicable patent
law.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW
OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/
OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of
this License. If you cannot convey a covered work so as to
satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence
you may not convey it at all. For example, if you agree
to terms that obligate you to collect a royalty for further
conveying from those to whom you convey the Program, the
only way you could satisfy both those terms and this License
would be to refrain entirely from conveying the Program.
17. Inter pretation of Sections 15 and 16.
13. Use with the GNU Affero General Public License.
If the disclaimer of warranty and limitation of liability
provided above cannot be given local legal effect
according to their terms, reviewing courts shall apply
local law that most closely approximates an absolute
waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability
accompanies a copy of the Program in return for a fee.
Notwithstanding any other provision of this License, you
have permission to link or combine any covered work
with a work licensed under version 3 of the GNU Affero
General Public License into a single combined work, and
to convey the resulting work. The terms of this License
will continue to apply to the part which is the covered
work, but the special requirements of the GNU Affero
General Public License, section 13, concerning interaction
through a network will apply to the combination as such.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
libpng
Permission is hereby granted to use, copy, modify, and
distribute this source code, or portions hereof, for any
purpose, without fee, subject to the following restrictions:
This copy of the libpng notices is provided for your
convenience. In case of any discrepancy between this
copy and the notices in the file png.h that is included
in the libpng distribution, the latter shall prevail.
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must
not be misrepresented as being the original source.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional
notices immediately following this sentence.
3. This Copyright notice may not be removed or altered
from any source or altered source distribution.
This code is released under the libpng license.
The Contributing Authors and Group 42, Inc. specifically
permit, without fee, and encourage the use of this source
code as a component to supporting the PNG file format in
commercial products. If you use this source code in a product,
acknowledgment is not required but would be appreciated.
libpng versions 1.2.6, August 15, 2004, through 1.5.7,
December 15, 2011, are Copyright (c) 2004, 2006-2011
Glenn Randers-Pehrson, and are distributed according to
the same disclaimer and license as libpng-1.2.5 with the
following individual added to the list of Contributing Authors
A "png_get_copyright" function is available, for
convenient use in "about" boxes and the like:
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October
3, 2002, are Copyright (c) 2000-2002 Glenn Randers-
Pehrson, and are distributed according to the same
disclaimer and license as libpng-1.0.6 with the following
individuals added to the list of Contributing Authors
printf("%s",png_get_copyright(NULL));
Also, the PNG logo (in PNG format, of course) is supplied in the files
"pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31).
Libpng is OSI Certified Open Source Software. OSI Certified Open
Source is a certification mark of the Open Source Initiative.
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
December 15, 2011
and with the following additions to the disclaimer:
There is no warranty against interference with your
enjoyment of the library or against infringement. There is
no warranty that our efforts or the library will fulfill any of
your particular purposes or needs. This library is provided
with all faults, and the entire risk of satisfactory quality,
performance, accuracy, and effort is with the user.
libxml (MIT License)
Open Source Initiative OSI - The MIT License (MIT):Licensing
The MIT License (MIT)
Copyright (c) <year> <copyright holders>
libpng versions 0.97, January 1998, through 1.0.6, March
20, 2000, are Copyright (c) 1998, 1999 Glenn Randers-
Pehrson, and are distributed according to the same
disclaimer and license as libpng-0.96, with the following
individuals added to the list of Contributing Authors:
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell copies of
the Software, and to permit persons to whom the Software
is furnished to do so, subject to the following conditions:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
libpng versions 0.89, June 1996, through 0.96, May 1997, are
Copyright (c) 1996, 1997 Andreas Dilger Distributed according
to the same disclaimer and license as libpng-0.88, with the
following individuals added to the list of Contributing Authors:
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
DMG’s dtoa and strtod
libpng versions 0.5, May 1995, through 0.88, January 1996, are
Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
The author of this software is David M. Gay.
Copyright (c) 1991, 2000, 2001 by Lucent Technologies.
For the purposes of this copyright and license, "Contributing
Authors" is defined as the following set of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Permission to use, copy, modify, and distribute this software
for any purpose without fee is hereby granted, provided that
this entire notice is included in all copies of any software which
is or includes a copy or modification of this software and in all
copies of the supporting documentation for such software.
Tim Wegner
The PNG Reference Library is supplied "AS IS". The Contributing
Authors and Group 42, Inc. disclaim all warranties, expressed
or implied, including, without limitation, the warranties of
merchantability and of fitness for any purpose. The Contributing
Authors and Group 42, Inc. assume no liability for direct,
indirect, incidental, special, exemplary, or consequential
damages, which may result from the use of the PNG Reference
Library, even if advised of the possibility of such damage.
THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT
ANY EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR,
NEITHER THE AUTHOR NOR LUCENT MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND
CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE
OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
bison_parser
or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE. Except as contained in this
notice, the name(s) of the above copyright holders shall not be
used in advertising or otherwise to promote the sale, use or other
dealings in this Software without prior written authorization.
The distribution terms for Bison-generated parsers permit using
the parsers in nonfree programs. Before Bison version 2.2, these
extra permissions applied only when Bison was generating LALR(1)
parsers in C. And before Bison version 1.24, Bison-generated
parsers could be used only in programs that were free software.
The other GNU programming tools, such as the GNU C compiler,
have never had such a requirement. They could always be used
for nonfree software. The reason Bison was different was not
due to a special policy decision; it resulted from applying the
usual General Public License to all of the Bison source code.
The output of the Bison utility the Bison parser file contains a
verbatim copy of a sizable piece of Bison, which is the code for
the parser’s implementation. (The actions from your grammar are
inserted into this implementation at one point, but most of the rest
of the implementation is not changed.) When we applied the GPL
terms to the skeleton code for the parser’s implementation, the
effect was to restrict the use of Bison output to free software.
WPASupplicant
Alternatively, this software may be distributed, used, and modified
under the terms of BSD license: Redistribution and use in source and
binary forms, with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
We didn’t change the terms because of sympathy for people who
want to make software proprietary. Software should be free. But we
concluded that limiting Bison’s use to free software was doing little
to encourage people to make other software free. So we decided to
make the practical conditions for using Bison match the practical
conditions for using the other GNU tools.
This exception applies when Bison is generating code for a parser.
You can tell whether the exception applies to a Bison output file by
inspecting the file for text beginning with ¨As a special exception....
The text spells out the exact terms of the exception.
3. Neither the name(s) of the above listed copyright holder(s) nor
the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS
AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
dmalloc
This is a version (aka dlmalloc) of malloc/free/realloc written by
Doug Lea and released to the public domain, as explained at http://
creativecommons.org/licenses/publicdomain. Send questions,
comments, complaints, performance data, etc to [email protected].
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
EMX_sprintf_sscanf
The emx libraries are not distributed under the GPL. Linking an
application with the emx libraries does not cause the executable
to be covered by the GNU General Public License. You are
allowed to change and copy the emx library sources if you keep
the copyright message intact. If you improve the emx libraries,
please send your enhancements to the emx author (you should
copyright your enhancements similar to the existing emx libraries).
tinyxml
JSON_Parser
Original code (2.0 and earlier )copyright (c) 2000-2006 Lee Thomason
(www.grinninglizard.com)
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the “Software”), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell copies of
the Software, and to permit persons to whom the Software
is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice
shall be included in allcopies or substantial portions of the
Software.The Software shall be used for Good, not Evil.
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any
damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation
would be appreciated but is not required.
ncurses
2. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source
distribution.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-------------------------------------------------------------------------
-- Copyright (c) 1998-2000,2006 Free Software Foundation, Inc.
Permission is hereby granted, free of charge, to any person
obtaining acopy of this software and associated documentation
files (the"Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge,
publish,-- distribute, distribute with modifications, sublicense, and/
45
Download from Www.Somanuals.com. All Manuals Search And Download.
|