Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
The lightning flash with an arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USERSERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT
PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.
CAUTION DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR
:
EQUIVALENT TYPE.
This symbol means that the unit complies with European safety and electrical interference
directives.
This Class I apparatus shall be connected to a main socket outlet with a protective earthing connection.
PLACEMENT INFORMATION
• Do not use this unit in places which are extremely hot, cold, dusty or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, or by
placing it on bedding or carpeting.
• Under the environment with radio frequency interference, the picture may be influenced.
SAFETY INFORMATION
• When connecting or disconnecting the AC power cord, grip the plug and not the cord itself. Pulling the cord may
damage it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC power cord.
• The mains plug is used as the disconnecting device. It should remain readily operable and should not be obstructed
during intended use. To be completely disconnected from the supply mains, the mains plug of the apparatus should
be disconnected from the mains socket outlet completely.
• The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
should be placed on apparatus.
• To completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.
• The mains plug of apparatus should not be obstructed OR should be easily accessed during intened use.
• Leave a minimum distance 4 inch around the apparatus for sufficient ventilation.
• The ventilation openings should not be impeded by covering with items such as newspaper, table-cloths, curtains etc.
• No naked flame sources such as lighted candles should be placed on the apparatus.
• Attention should be drawn to the environmental aspects of battery disposal.
• The use of apparatus in moderate climates.
• Under the influence of electrostatic phenomenon, the product may malfunction and require use to power reset.
CONDENSATION INFORMATION
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the
equipment. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1-2
hours before turning the power on or gradually heat the room and allow the unit to dry before use.
RATING PLATE LOCATION
The rating plate is located on the rear of the unit.
WARNING: Should any problems occur, disconnect the AC cord and refer servicing to a qualified
technician.
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
MAINS PLUG
UNITS SUPPLIED WITH MOULDED MAINS PLUG
1. If the mains plug fitted to the AC cord supplied is not suitable for your mains outlet,
it may be necessary to cut it off. Carefully dispose of the severed plug. Under no
circumstances must it be inserted into a mains socket, otherwise a dangerous
electric shock could result.
10
2. If the fuse in the fitted mains plug should fail, replace it with a BS1362 approved
fuse rated at 10A. Never use the plug without the fuse cover fitted.
WIRING A MAINS PLUG
As the wires in the mains lead may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wires in this mains lead are
coloured in accordance with the
following code.
•
•
•
The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
BLUE - NEUTRAL
BROWN - LIVE
GREEN/YELLOW - EARTH
Connection is to be made to the earth terminal of the plug which is marked with
the letter E or coloured green and yellow or marked by the safety earth symbol.
The standard (BS1363) mains plug must be fitted with a 10 Amp fuse approved to BS1362. If any other plug or
connection is used, a 10 Amp fuse must be fitted in the plug or adaptor or in the distribution board.
SAFE USE OF YOUR EQUIPMENT
Here are a few tips to help you do this:
READ this instruction manual before you attempt to use the equipment.
NEVER fit make shift stands or legs with woodscrews. Use only approved supports and fasteners specially designed for
the equipment.
NEVER let anyone, especially children, push objects into holes, ventilation slots or any other opening; this could result in
fatal electric shock.
ALWAYS disconnect the AC adaptor when you are not going to use the unit for a long period time.
ENSURE that all electrical connections (including the mains plug, extension leads and interconnections between pieces
of equipment) are properly made in accordance with the instructions given. Switch off the main supply when making or
changing connections.
CONSULT your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DON'T continue to operate the equipment if it is damaged in any way or if it does not function normally. Disconnect the
AC adaptor and consult your dealer.
DON'T leave the equipment switched on when it is unattended unless it is part of its normal function to operate in your
absence, for example a video cassette recorder with timed recording facility.
LISTEN to headphones at moderate volume levels; high volume levels can permanently damage your hearing.
CONTENTS
SAFETY PRECAUTIONS ................................................... 1
IMPORTANT SAFETY INSTRUCTIONS ............................ 2
INSTALLATION................................................................. 3
Installing the Base Stand ...........................................................3
Mounting on the Wall .................................................................3
ACCESSORIES .................................................................. 4
GETTING STARTED.......................................................... 4
CONTROL REFERENCE GUIDE ................................... 5 - 8
CONNECTIONS ......................................................... 9 - 13
Connecting a TV Antenna / Cable / Satellite.......................9
Common Interface .......................................................................9
Connecting an A / V Device.................................................... 10
Connecting to Sources With SCART.................................... 10
Connecting a High Definition (HD) Source Using HDMI
Connection .................................................................................. 11
Connecting a High Definition (HD) Source Using
Component Connection ........................................................ 11
Connecting a PC......................................................................... 12
Connecting an Audio Amplifier............................................ 12
Connecting the AC Power Cord............................................ 13
USING HEADPHONES................................................... 13
BASIC OPERATION................................................. 14 - 15
TV SETUP ............................................................... 16 - 20
TV Setting Menu ....................................................................... 16
Picture Menu .............................................................................. 17
Sound Menu ............................................................................... 18
Time Menu .................................................................................. 18
Setup Menu ................................................................................ 19
Lock Menu.................................................................................... 20
TELETEXT ...................................................................... 21
TROUBLESHOOTING GUIDE ........................................ 22
SPECIFICATIONS........................................................... 22
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
INSTALLING THE BASE STAND
WARNING: The display is very fragile, and must be protected at all times when installing the base stand. Be sure
that no hard or sharp objects, or anything that could scratch or damage the display come in contact with it. Do
NOT place pressure on the rear of the unit at anytime because the screen could crack.
1. Disconnect any cables or cords connected to the unit.
2. Lay the unit down on a flat surface, so the back side is facing up, making sure to place a soft cushioned
material (such as a blanket or thick piece of foam) beneath the screen.
3. Put the stand into the hole at the bottom of the TV.
4. Insert screw into the hole and tighten.
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 15 3/4”x 7 7/8”(400mm
x 200mm) mounting kit designed for flat-panel TVs (sold separately). Mount this unit according to the directions
included with the mounting kit.
NOTE:
Remove the base stand before mounting the unit on the wall.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
Please check and identify the supplied accessories.
Remote Control (with battery) ................................................................................................................................................ x 1
AC Power Cord ................................................................................................................................................................................. x 1
Screw for Base Stand ..................................................................................................................................................................... x 4
GETTING STARTED
USING THE REMOTE CONTROL
• Point the remote control at the remote sensor located on the unit.
• When there is a strong ambient light source, the performance of the infrared remote sensor may be degraded,
causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
Take out the PVC sheet before operating the Remote Control.
TO INSTALL BATTERIES
1. Open the battery door.
2. Insert one CR2025 (3V) size battery.
BATTERY REPLACEMENT
When the batteries become weak, the operating distance of the remote control is greatly reduced and you will
need to replace the batteries.
NOTES:
• If the remote control is not going to be used for a long time, remove the batteries to avoid damage caused by
battery leakage corrosion.
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING :
• Do not dispose of batteries in a fire. Batteries may explode or leak.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Waste electrical and electronic products must not be disposed of with household
waste. Please refer to the retailer from whom you purchased this item for disposal
instructions.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL REFERENCE GUIDE
REMOTE CONTROL
1)
STANDBY/ON Button
Press to turn ON the unit or put it in STANDBY (OFF)
mode.
2) Number (0 - 9) Buttons
Press to change the TV/DTV channels.
3) TV MENU Button
Press to display the on-screen TV menu.
4) FUNCTION Button
PresstoswitchbetweenDTV,TV, AV1/S-VIDEO, AV2/SCART,
YUV, HDMI1, HDMI2 or PC.
5) TV/DTV Button
1
2
Press to switch to TV/DTV mode.
AV Button
Press to switch to source connected to AV1/S-VIDEO or
AV2/SCART inputs.
PC Button
Press to switch to PC mode.
RADIO Button
3
4
Press to select DTV digital radio programmes. Press again
to exit to normal DTV programmes mode.
6) LIST Button
Press to display the channel list in TV/DTV mode.
7) INFO Button
Press to display the channel information in DTV mode.
8) GUIDE Button
5
6
7
8
9
PAGE
Press to display the PROGRAMME Guide in DTV mode.
9) TIME Button
Press to display the current time information from DTV.
10) + VOL / VOL – Buttons
10
Press to adjust the volume level.
11) SLEEP Button
PAGE
11
Press to set the SLEEP timer. The unit will remain ON
for the time that is set, and will automatically shut off
afterwards.
12
13
14
15
16
12) FORMAT Button
Press to select the picture format.
13) HOLD Button
Press to stop the automatic page change from Teletext.
14) TEXT Button
Press to directly select Teletext mode.
15) INDEX Button
17
Press to select the page number of the index from
Teletext.
16) REVEAL Button
Press to reveal answers on a quiz or game pages from
Teletext.
17) RED/GREEN/YELLOW/BLUE Button
Press to edit the channels listed in the Programme Edit.
Press to select the relevant page quickly from Teletext.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL REFERENCE GUIDE
REMOTE CONTROL
18) DISPLAY Button
Press to display information on the screen.
19) LAST CH Button
Press to switch repeatedly between the last two channels
displayed.
20) MUTE Button
Press to mute the sound.
Press again to cancel mute.
21) PC AUTO Button
Press to set picture settings for PC mode automatically.
22) FAV Button
Press to display the Favourites program in TV/DTV mode.
(You should setup your favourite TV/DTV channels in
Programme Edit menu.)
18
19
20
23) EXIT Button
Press to exit the menu and return directly to normal
viewing.
24)
Button
Press to directly select Stereo-Dual I/ II/ Mono.
21
22
25) PAGE/CH
/
Buttons
Press to change the TV/DTV channels.
Press to go forward or backward the page of Teletext
screen in TV mode.
Press to go forward or backward the page of Programme
Edit & Favourite in TV/DTV mode.
23
24
PAGE
26) CURSOR (
,
,
,
) Buttons
Press to highlight selections on a menu screen and adjust
certain settings.
25
ENTER/OK Button
Press to confirm selections on a menu screen.
27) SOUND Button
PAGE
26
27
28
29
30
31
32
Press to select from preset sound settings (Standard,
Music, Theatre, Voice & Personal) to match the type of
show you are watching.
28) PICTURE Button
Press to select from preset screen display settings
(Standard, Movie, Dynamic, Soft & Personal) to match the
type of show you are watching.
29) MIX Button
Press to select Teletext with a TV programme.
30) SUBTITLE Button
Press to select one of your preferred subtitle languages or
turn off subtitle. (Available for digital channels if multiple
subtitle languages are broadcasted.)
31) CANCEL Button
Press to cancel the Teletext menu.
32) SIZE Button
Press to set the letters size of teletext on the screen.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL REFERENCE GUIDE
FRONT & SIDE VIEWS
7. Colour Screen
8. Speaker
1.
/ I (STD.BY / ON) Button
Turns the unit ON and OFF.
9. Remote Sensor
Receives the remote control signal.
Standby Indicator
2. MENU Button
Enters the on-screen TV menu.
3. FUNCTION Button
Selects DTV, TV, AV1/S-VIDEO, AV2/SCART, YUV,
HDMI1, HDMI2 and PC.
4.
CH / CH Buttons
Changes the TV channels.
5. - VOL / VOL + Controls
Adjusts the volume level.
6. Removable Stand
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL REFERENCE GUIDE
REAR VIEW
10. AC Socket
11. HDMI IN Jacks (HDMI IN 1 & HDMI IN 2)
12. AUDIO Jack (PC IN)
13. MONITOR / VGA Jack (PC IN)
14. SCART Jack (AV IN 2)
15. AUDIO IN (Left / Right) Jacks (AV IN1)
16. VIDEO IN Jack (AV IN 1)
18. AUDIO IN (Left / Right) Jacks (YUV IN)
19. COMMON INTERFACE Slot
20. TV ANTENNA Terminal
21. HEADPHONES Jack
22. COMPONENT VIDEO IN (Y / PB / PR) Jacks
(YUV IN)
23. S-VIDEO Jack (AV IN 1)
17. AUDIO OUT (Left / Right) Jack
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING A TV ANTENNA / CABLE / SATELLITE
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor antenna
- A cable system
- A satellite system
NOTE:
For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna. Should you
require the use of a temporary antenna, please ensure that you purchase an antenna with sufficient ability to
receive in weak signal areas. Only when you are in close proximity to a transmitter will a temporary antenna
reproduce a signal as strongly as a fixed antenna.
Satellite, cable or TV antenna
cable to TV ANTENNA terminal
(cable not included)
COMMON INTERFACE
The unit is equipped with a CI slot. The CI slot allows you to insert a CAM (Conditional Access Module) with an
appropriate subscription card for some pay for view services.
It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial
broadcasting.
Fully insert the CAM (Conditional Access Module) into the CI (Common Interface) slot on the bottom of the unit
with its label side facing you.
Important notes:
•
•
Switch off the TV and unplug from the AC power mains before inserting or removing the CAM.
TheCAMshouldbecorrectlyinserted,itisimpossibletoinsertfullyifreversed.TheCAMortheTVterminal
may be damaged if the CAM is forcefully inserted.
•
Some CAMs may require setting up. Refer to the module instruction manual for details of the settings.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING AN A/V DEVICE
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.
Connecting to a VCR / Camcorder / Satellite System / Cable
Connect the AUDIO and S-VIDEO cable (not included) as shown:
Make sure you connect the cable
from the other equipment (AUDIO
OUT and S-VIDEO OUT) to this unit
(AUDIO IN and S-VIDEO).
To AUDIO
IN jacks
(AV IN 1)
To operate the connected device
and play the source, first press the
FUNCTION or AV button to select
the AV 1/S-VIDEO mode.
NOTE:
Please refer to the user manual
for the other equipment for more
information.
To S-VIDEO OUT /
AUDIO OUT jacks
To S-VIDEO
jack
CONNECTING TO SOURCES WITH SCART
Devices with RGB output must be connected to the SCART input:
Connect the SCART from the source
to the corresponding SCART on this
unit (SCART cable not included) as
shown.
Make sure you connect both to
SCART.
To operate the connected device
and play the source, first press the
FUNCTION or AV button to select
the AV 2/SCART mode.
SCART
CABLE
If your VCR permits, connect your antenna to
your VCR and VCR RF to your TV.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING HDMI CONNECTION
HDMI (High Definition Multimedia Interface) supports both
video and audio on a single digital connection for use with
DVD players, DTV, set-top boxes and other digital AV devices.
HDMI was developed to provide the technologies of High
Bandwidth Digital Content Protection (HDCP) as well as
Digital Visual Interface (DVI) in one specification. HDCP is
used to protect digital content transmitted and received by
DVI-compliant or HDMI-compliant displays.
HDMI has the capability to support standard, enhanced
or high-definition video plus standard to multi-channel
surround-sound audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes per second
(with HDTV signals), one connector (instead of several cables
and connectors), and communication between the AV source
and AV devices such as DTVs.
To HDMI
IN jack
To HDMI
OUT jack
HDMI, the HDMI logo
Multimedia Interface are trademarks or registered trademarks
of HDMI licensing LLC.
and High-Definition
Connect the HDMI cable (not included) as shown:
Make sure you connect the cable from the source equipment (HDMI OUT) to this unit (HDMI IN).
To match the video source output quality, press the FUNCTION button, then choose the HDMI1/HDMI2
mode
.
CONNECTING A HIGH-DEFINITION (HD) SOURCE USING COMPONENT CONNECTION
High-Definition (HD) Devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT
VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN).
To AUDIO IN jacks
(YUV IN)
To operate the connected device
and play the source, first press the
FUNCTION button to select the
YUV mode.
To COMPONENT
VIDEO OUT jacks
* May require a subscription for
To COMPONENT
VIDEO IN jacks
receiving HD channels. Check with
your cable/satellite service provider
for details.
NOTE:
When connecting a DVD player to the television, the picture resolution is solely dependent upon the resolution
supported by the DVD player attached. DVD player resolutions vary from 576i to 1080i, and this unit can support
DVD players up to a maximum resolution of 1080i.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING A PC
Connect the 15-pin D-SUB PC/VGA connector
from your computer to the 15-pin D-SUB PC/
VGA input on this unit using a monitor cable and
audio cable (not included) as shown.
Make sure you connect the cable from the
computer (PC Connector and PC AUDIO) to this
unit (PC IN MONITOR / VGA and AUDIO).
To operate the connected device, first press the
PC button to select the PC mode.
To PC AUDIO OUT jack
To PC Connector
CONNECTING AN AUDIO AMPLIFIER
This connection allows you to use an audio amplifier and external speakers.
Connect the AUDIO cable (not included) as shown:
Make sure you connect the cable from the other
equipment (AUDIO IN) to this unit (AUDIO
OUT).
To AUDIO
OUT jacks
To AUDIO IN jacks
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING THE AC POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the STANDBY / ON button on the unit or remote control to turn on the unit.
NOTES:
• Be sure the AC power cord is disconnected and
the TV is switched off before making connections.
• Make sure that all components are connected
correctly.
• When you are not going to use the unit for a long
period of time, disconnect the power cord.
• The apparatus should not be exposed to dripping
or splashing and that no objects filled with
liquids, such as vases, should be placed on the
apparatus.
• The mains plug is used as the disconnecting
device. It should remain readily accessible
and should not be obstructed during use. To
be completely disconnected from the supply
mains, the mains plug of the apparatus should
be disconnected from the mains socket outlet
completely.
To AC wall outlet
USING HEADPHONES
• Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired
level.
• When headphones are connected, no sound will come from the front speakers.
NOTE:
Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause
hearing loss.
Headphones
(1/8" [3.5mm]
diameter plug)
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
When you turn on your television set for the first
time, be sure to place it on a solid stable surface. To
avoid danger, do not expose the TV to water or a heat
source (e.g. lamp, candle, radiator). Do not obstruct
the ventilation grid at the rear and be sure to leave
sufficient gaps around the unit as shown.
4"
4"
4"
TURNING THE UNIT ON FOR THE FIRST TIME
The first time you turn the unit on, it will go straight into Auto scan mode. Simply follow the screen prompts as
below to tune in the channels.
1. Use the
language you prefer.
2. Use the button to highlight Auto Tuning and
/
button to select the screen menu
NEW INSTALLATION
Language
English
press the ENTER/OK button to enter Auto Tuning
menu.
Auto Tuning
TV
EXIT EXIT
RETURN OK ENTER
3. Use the
in.
4. Use the
/
button to select the Country you are
button to move to Start. Press the
ENTER/OK button to confirm Start. The system will
automatically start to scan and preset all available
programmes.
TV
5. After scanning has finished, the TV will display the first programmes stored.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
ELECTRONIC PROGRAMME GUIDE (EPG) FOR DTV
While watching a DTV programme, you can press the GUIDE button to display the PROGRAMME GUIDE menu, and
check for programme information.
PROGRAMME GUIDE
•
•
Use the
,
,
,
button to select a programme, the programme time and name displays. Press the INFO
button to display detailed information if available. Press the INFO button again to return.
Press the YELLOW button to highlight programme date, then use the
other dates.
/
button to display information for
•
•
Press the ENTER/OK button to watch the selected channel.
Press the EXIT button to exit the PROGRAMME GUIDE menu.
NOTE:
Guide information display may be different according to the DTV programmes.
AUDIO LANGUAGE FOR DTV
While watching a DTV programme, you can press the
select audio language, audio format and sound track.
button to display the Audio Language menu, and
•
•
Use the or button to select an audio language if available. Press the
/
button to adjust, then press the
ENTER/OK button to confirm.
Press the
or EXIT button to exit the Audio Language menu.
NOTE :
For analogue TV, press the
button to select Mono / Stereo-Dual I/II directly.
V.I.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
TV SETTING MENU (only in ATV or DTV mode)
1. Press the TV MENU button.
2. Use the or button to select the TV SETTING.
3. Use the or button to select the options (Auto Tuning, DTV
Manual Tuning, ATV Manual Tuning, Programme Edit or CI
Information), and then press the ENTER/OK button to enter
the settings.
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
CI Information
4. Press the TV MENU button to return to previous menu, repeat
step 2 to adjust other settings.
5. To exit the setup menu and return to the normal screen, press
the EXIT button.
•
•
•
•
Auto Tuning
Automatically scan, sort and store all available programmes.
DTV Manual Tuning
Perform manual search for DTV (Digital TV) programmes.
ATV Manual Tuning
Perform manual search and fine tune for ATV (Analog TV) programmes.
Programme Edit
All channels stored are listed in the Programme Edit menu, you can edit the channels by the following steps:
1. Use the or button to select a channel. (Press the PAGE/CH
/
button to skip to previous / next
page.)
2. Press the RED / GREEN / YELLOW / BLUE button or the FAV button to edit the channel.
• DELETE
Press the RED button to delete the selected channel and press the ENTER/OK button to confirm. Press the
TV MENU button to stop delete.
• RENAME (for ATV mode only)
Press the GREEN button to rename the selected channel. Use the or button to select the characters to
represent the station name, use the
TV MENU button to confirm.
• MOVE (for ATV mode only)
/
button to move the next position of character, and then press the
Press the YELLOW button and use the
or
button to move the selected channel, then press the TV
MENU button to confirm.
• SKIP
Press the BLUE button to skip or not skip the selected channel.
• FAV (Favourite)
Press the FAV button to set or cancel the selected channel as one of the favourite programmes.
•
CI Information
Display CAM and Smart card information; select the language if available.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
PICTURE MENU
1. Press the TV MENU button.
2. Use the
or
button to select the options (Picture Mode,
Contrast, Brightness, Colour, Sharpness, Colour Temp or PC
Setup), then adjust them using the or button. (Only when
Picture Mode is set as Personal can the Contrast, Brightness,
Colour and Sharpness options be activated.)
(In PC mode, select PC Setup and press the ENTER/OK button to
enter the settings.)
3. Press the TV MENU button to return to previous menu.
4. To exit the setup menu and return to the normal screen, press
the EXIT button.
Picture Mode
Contrast
Standard
65
60
46
43
Brightness
Colour
Sharpness
Colour Temp
PC Setup
Normal
•
•
•
Picture Mode
Select from four preset screen display settings (Standard, Movie, Dynamic and Soft), or select Personal in
which your own settings of Contrast, Brightness, Colour and Sharpness are stored.
Contrast
Adjust the contrast of the picture. The black portions of the picture become richer in darkness and the white
become brighter.
Brightness
Adjust the brightness of the picture.
•
•
•
Colour
Adjust the colour of the picture.
Sharpness
Adjust the sharpness level to improve detail in the picture.
Colour Temp
Select the colour temperature of the picture. Select Normal (balanced) / Warm (red white) / Cold (blue white)
mode.
NOTE: You can also select Picture Mode simply by pressing the PICTURE button on the remote control.
•
PC Setup
Use the or button to select the options (H-offset, V-offset, Size, Phase, Auto Adjust) and adjust them
using the or buttons.
- Resolution : 1024 x 768 max
- Refresh Frequency : 60Hz
• H-offset
Centre the image by moving it left or right.
• V-offset
Centre the image by moving it up or down.
H-Offset
V-Offset
Size
50
50
0
• Size
Adjust the screen size.
Phase
60
Auto Adjust
• Phase
Best Resolution
1024x768
Adjust when characters have low contrast or when the image
flickers.
• Auto Adjust
Adjust the image automatically.
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
SOUND MENU
1. Press the TV MENU button.
2. Use the or button to select the SOUND.
3. Use the
or
button to select the options (Sound Mode,
Treble, Bass, Balance or AVL), then adjust them using the or
button. (Only when Sound Mode is set as Personal can the Treble
and Bass options be activated.)
4. Press the TV MENU button to return to previous menu.
5. To exit the setup menu and return to the normal screen, press
the EXIT button.
Sound Mode
Treble
Standard
Bass
Balance
AVL
On
Experiment with different sound settings until you find the settings you prefer.
•
Sound Mode
Select from four preset sound settings (Standard, Music, Theatre and Voice), or select Personal in which your
own settings of Treble, Bass are stored.
•
•
•
•
Treble
Adjust the treble range.
Bass
Adjust the bass range.
Balance
Adjust the balance level toward the left or right speakers.
AVL
It stands for Auto Volume Leveler. When set On, it automatically remains on the same level of volume if you
change programmes.
NOTE: You can also select Sound Mode simply by pressing the SOUND button on the remote control.
TIME MENU
1. Press the TV MENU button.
2. Use the or button to select the TIME.
3. Use the
Time Zone), then adjust them using the
4. Press the TV MENU button to return to previous menu.
5. To exit the setup menu and return to the normal screen, press
the EXIT button.
,
button to select the options (Clock, Sleep Timer or
or button.
Clock
- - - - - - - -
Off
,
,
Sleep Timer
Time Zone
London GMT
•
Clock
Press the ENTER/OK button to enter the Clock menu, then use the
,
,
,
button to set Date, Month, Year,
Hour and Minute.
•
•
Sleep timer
Select the time to turn the unit to Standby mode automatically: Off -> 5min - - - - -> 90min -> 120min.
Time Zone
Select your time zone.
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
SETUP MENU
1. Press the TV MENU button.
2. Use the or button to select the SETUP.
3. Use the or button to select the options (Language, Audio
Language, Subtitle Language, PDP Setup or Restore Setting),
then adjust them using the or button.
4. Press the TV MENU button to return to previous menu.
5. To exit the setup menu and return to the normal screen, press
the EXIT button.
Language
English
English
English
Audio Language
Subtitle Language
PDP Setup
Restore Setting
•
•
Language
Select your preferred On Screen Display language.
Audio Language
Select your preferred audio language. (Available for digital channels if multiple audio languages are
broadcasted.)
•
•
Subtitle Language
Select your preferred subtitle language or turn off subtitle. (Available for digital channels if multiple subtitle
languages are broadcasted.)
PDP Setup
Use the or button to select the options (Gamma, Power or
ISM Method) and adjust them using the or buttons.
Gamma
Middle
Power
Level 1
Standard
ISM Method
Restore Setting
Restore Setting
• Gamma
High gamma values display whitish images and low gamma values display high contrast images. Use the
or button to select the options (Bright, Middle or Dark).
• Power
This function allows you to reduce the power consumption of the TV. Use the or button to select the
desired power saving level (Level 0 ~ Level 4).
• ISM (Image Sticking Minimization) Method
A frozen or still picture from a PC / video game displayed on the screen for prolonged periods will result in
a ghost image remaining even when you change the image. This option avoids allowing a fixed image to
remain on the screen for prolonged periods. There are 4 options (Standard, White Screen, Screen Saver or
Inversion) for your choice.
•
Restore Setting
Press the ENTER/OK button to restore the system settings to the factory default.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SETUP
LOCK MENU
1. Press the TV MENU button.
2. Use the or button to select the LOCK.
3. Press the ENTER/OK or
button and enter password to
proceed. (The default password is 0000.)
Lock System
Off
Off
4. Use the
or
button to select the options (Lock System,
Change Password
Block Programme
Parental Guidance
Change Password, Block Programme, Parental Guidance),
then press the ENTER/OK or
,
button to adjust.
5. Press the TV MENU button to return to previous menu.
6. To exit the setup menu and return to the normal screen, press
the EXIT button.
If you forget the password, enter " 8888 " to unlock parental control.
•
•
•
Lock System
Select to lock or unlock the programmes.
Change Password
If you change the password, remember your password.
Block Programme
In the Block Programme menu, press the or button to select a channel and then press the GREEN button
to change Lock or Unlock the channel.
•
Parental Guidance
Select a censorship level to censor and block the programmes.
NOTE: This system will only work if the correct information is transmitted by the TV channel.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT
Teletext is an information system that displays text on your TV screen. Using the Teletext control buttons you can
view pages of information that are listed in the teletext index.
Please Note
On Screen Display is not available in text mode. The contrast, brightness and colour cannot be changed but the
volume control is still available.
Analog and Digital text look very different and operate differently.
For Analogue text press the TEXT button in ATV mode. For digital text, press the TEXT button in DTV mode.
DOUBLE HEIGHT TEXT
TO ENTER TEXT MODE
If you have difficulty in reading the text on the TV you
can double the height of the text.
Please Note
Make sure the TV channel you are watching transmits
teletext. If not, the “No Teletext” sign will be shown on
the screen.
Press the SIZE button, the top half of the page will be
displayed in double height text.
In TV mode, press the TEXT button. The text page will
appear, normally the index page.
Press the SIZE button again, the bottom half of the
page will be displayed in double height text.
TO EXIT TEXT MODE
Press the TEXT button. The TV will return to the
channel you were watching.
Press the SIZE button again to return to the full page.
PAGE STOP
If the page of text you have selected contains sub
pages, these sub pages will automatically be displayed
in order with a delay to allow you to read the page.
TO SELECT A PAGE OF TEXT
Find the number of the page in the index and enter it
using the Numeric buttons. The number of the page
will appear on the top left corner of the screen.
To stop moving to the next sub page, press the HOLD
button. “
screen.
” will appear on the top left corner of the
The page counter will search for your page. When it
finds it, the page will be displayed.
To continue moving through the sub pages, press the
HOLD button again.
To move to the next page of text, press the PAGE/CH
button.
To move to the previous page, press the PAGE/CH
button.
TO REVEAL INFORMATION
Press the REVEAL button to reveal concealed information
(quiz answers etc.).
To return to the index page, enter the “100” by using
the Numeric buttons.
Press the REVEAL button again to conceal the
information again.
MIX
To view a page of the text whilst watching a TV
programme, press the MIX button. The text will be
superimposed over the TV programme.
FASTEXT
At the bottom of the teletext screen is a row of subject
headings in red, green, yellow and blue.
Press the MIX button again to return to the text page.
The remote control has a row of colour buttons
corresponding to the row of coloured subjects on the
screen.
PAGE SEARCH WHILST WATCHING TV
In Text mode press the CANCEL button.
Enter the page number you want using the Numeric
buttons.
Pressing one of the colour buttons will take you directly
to the page corresponding to the subject heading.
The top line of the text page will appear whilst the text
searches for your page. When the page is found, the
number will remain in the top left hand corner of the
screen.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
SYMPTOM
CAUSE (AND REMEDY)
• Make sure the AC power cord is connected.
• The unit is not turned on.
No power.
• Remove any obstacles between the remote and the unit.
• Use the remote near the unit.
The remote does not function.
• Point the remote at the remote sensor on the unit.
• Replace the batteries in the remote with new ones.
TV
• Check the location of the antenna and adjust it if necessary.
• Make sure the antenna cable is firmly connected.
• Make sure all input cables are firmly connected.
Bad Picture (snow, multiple
images, distortion, blurry)
• Check the PICTURE MENU within the TV SETUP MENU.
• Check to make sure the program you are watching is broadcast in
colour and not black & white.
Black and white picture.
No picture or sound.
• Make sure the unit is plugged in and turned on.
• Make sure that TV mode is selected.
• Try a new channel to check for possible station trouble.
• Make sure the antenna is connected properly.
• Increase the volume.
• Make sure the antenna or audio video source device is working
properly.
• Make sure all cables are firmly connected.
• Check for local interference.
• Make sure there are no unshielded electrical devices nearby that are
causing interference.
Coloured patches of picture.
• Turn the unit off for 30 minutes, then try it again.
• Check the connection between this unit and the HDMI out jack of
other equipment.
• Check your TV system setup correctly.
No sound is output from the
HDMI out.
• Under the influence of electrostatic phenomenon, the product may
malfunction and require user to reset power.
• Unplug and re-plug the AC power cord.
Panel function key does not
respond correctly.
SPECIFICATIONS
Power Consumption
Power Requirements
330W
230V ~ 50Hz
Specifications and external appearance are subject to change without advance notice due to continuous
product improvement.
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Your Technika appliance is covered by a warranty for 12 months from the date of purchase. If a fault develops
during this period, please contact the TESCO electrical help line on 0845 4566767. Please have your original
purchase receipt with you when you call. This warranty in no way affects your consumer rights.
UK:Waste electrical products should not be disposed of with household waste. Separate disposal
ROI: Produced after 13th August 2005. Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.
Tesco Stores Ltd.,
Cheshunt EN8 9SL, U.K.
© TESCO 2008
811-284291W140
Download from Www.Somanuals.com. All Manuals Search And Download.
|