Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: SMART1500RMXL2UA
SmartPro Expandable Rack/Tower UPS System - Intelligent, line-interactive network power management
system
Highlights
1500VA / 1.5kVA line interactive, extended-run 2U rack / tower UPS
Maintains sine-wave 120V nominal output over an input range of 79 to 147V
Network communications supported via USB port, serial port, SNMP/Web
card slot and EPO interface
Current monitoring and switched PDU control via 3 two-outlet load banks
Input: NEMA 5-15P (120V 15A) / Output: 8 NEMA 5-15R (120V)
2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto
Rico & Canada only)
Description
Tripp Lite's SMART 1500RMXL2Ua intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment
damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large
internal batteries offer 21 minutes half load runtime and 7.5 minutes at full load. Runtime is expandable with optional BP36V15-2U external battery
pack (limit 1) or BP36V42-3U (multi-pack compatible). Maintains regulated 120V nominal output without using battery power during brownouts and
overvoltages from 75 to 147V. 1500VA / 1000 watt power handling capability supports a variety of networking, telecom and other sensitive electronic
applications. Includes a total of 8 outlets with 3 load banks that are individually controllable via software interface to reboot select equipment on
demand or shed less significant loads to extend battery runtime for more critical equipment. Supports remote monitoring of UPS and site power
conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete
cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for
instantaneous power-off of UPS and connected equipment in the case of fire or emergency. Multi-function audible alarms and set of 5 front panel
LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and
performance problems resulting from transient surges and line noise. Attractive all-black color scheme. Two year warranty with $250,000 connected
equipment insurance (USA & Canada only).
Applications
Ideal for the protection of rackmount fileservers, network accessories and telecommunications equipment. Common applications include
any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems. Line interactive voltage
regulation makes this system ideal for locations where severe brownouts and overvoltages are common
Package Includes
SMART 1500RMXL2Ua UPS System
PowerAlert software with USB and DB9 cables
Mounting hardware for 4 post rackmount installation
Cable for Emergency Power Off interface
Instruction manual with warranty information
Download from Www.Somanuals.com. All Manuals Search And Download.
Expandable battery
runtime
Supports extended runtime with optional BP36V15-2U external battery pack (limit 1) or BP36V42-3U (multi-pack
compatible)
DC system voltage
36 VDC
Typical battery
lifespan
3-6 years, depending on usage
Battery recharge rate 2-4 hours to 90%
Replacement
RBC93-2U
Battery Cartridge
VOLTAGE REGULATION
Voltage regulation
description
Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without
using battery power, during brownouts to 75V and overvoltages to 147V
Overvoltage
correction
Input voltages between 128 and 147VAC are reduced by 12%
Direct pass through
Input voltages between 105 and 127VAC are passed on to connected equipment unchanged
Brownout correction Input voltages between 95 and 104VAC are boosted by 12%
Severe brownout
correction
Input voltages between 75 and 94VAC are boosted by 24%
LEDS ALARMS & SWITCHES
Front panel LEDs
5 front panel LEDs - Green POWER LED, Green VOLTAGE CORRECTION LED, 3 color BATTERY CHARGE LED, 3
color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.
Alarms
3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short
beeps) and low battery (continuous tone)
Switches
Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
SURGE / NOISE SUPPRESSION
AC surge
suppression
480 joules
Instantaneous
Yes
AC suppression
response time
EMI / RFI AC noise
suppression
PHYSICAL
Shipping weight
(lbs)
53
Shipping weight (kg) 23
Shipping
9 x 24 x 20.25
Dimensions
(HWD/in)
Shipping
22.9 x 61 x 51.4
Dimensions
(HWD/cm)
Unit weight (lbs)
Unit weight (kg)
43.5
19.7
Unit Dimensions
(HWD/in)
3.5 x 17.5 x 13.5
Unit Dimensions
(HWD/cm)
8.89 x 44.5 x 34.3
Steel
Material of
construction
Form factors
supported
Rack (2U)
Cooling method
Built-in cooling fan
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Access
Battery access door allows hot swap battery replacement without powering connected equipment off
0 to 95%, non-condensing
ENVIRONMENTAL
Relative Humidity
Storage Temperature +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Operating
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Temperature
Line mode BTU/hr.
(Max.)
81.9
Battery mode
BTU/hr. (Max.)
277.9
COMMUNICATIONS
Network monitoring
port
Includes 2 built-in monitoring ports, 1-USB & 1-DB9. Each supports on battery, low battery, power restored, AC line
voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and
line frequency status
Software and
cabling included
Includes PowerAlert UPS monitoring software for network and standalone operating systems. Ships with complete USB
and DB9 cabling.
SNMP compatibility
Built-in accessory slot accommodates internal SNMPWEBCARD and other network accessories
WatchDog
compatibility
Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot
of application / OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications
LINE / BATTERY TRANSFER
Transfer time from
line power to
2-4 milliseconds
battery mode
Low voltage transfer 75V (resets to line power as voltage increases to 79V)
to battery power
High voltage
transfer to battery
power
147V (resets to line power as voltage decreases to 144V)
SPECIAL FEATURES
EPO port
Includes RJ11 EPO (emergency power off) port and cable
TVSS grounding
Includes back panel grounding point with thumbscrew for data line surge suppressors and other network accessories
requiring a safe grounding point
Cold Start
Yes, inverter can be "cold started" to enable temporary AC output during a power failure
Attractive black housing
Appearance
BATTERY PACK ACCESSORY (optional)
Battery Pack
BP36V15-2U (limit 1) or BP36V42-3U (multi-pack compatible)
Accessory (optional)
CERTIFICATIONS
Certifications
WARRANTY
Tested to UL1778 (USA), cUL (Canada), Class B (Emissions), NOM (Mexico)
Product Warranty
Period
2 year product warranty
Connected
Equipment Coverage
$250,000 connected equipment insurance (USA / Canada only)
3 year, 5 year, next day and on-site warranty coverage available for select opportunities
Optional Coverage
Related Items
External Battery Packs
BP36V15-2U
BP36V15-2U - External Battery Pack for UPS System
BP36V42-3U - External Battery Pack for UPS System
Qty: [optional]
Qty: [optional]
BP36V42-3U
Download from Www.Somanuals.com. All Manuals Search And Download.
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
©2009 Tripp Lite. All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|