OWNER'S MANUAL
TM
DLP Projection Television
Owner's Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model:
Serial No.:
44HM85
5
Download from Www.Somanuals.com. All Manuals Search And Download.
562C_2~5(2)_en 90/6/18 1:15 PM Page 2
Dear Customer,
Thank you for purchasing this Toshiba TV. This manual will
help you use the many exciting features of your new TV.
Before operating the TV, please read this manual completely,
and keep it nearby for future reference.
Child Safety
It Makes A Difference
Where Your TV Stands
Safety Precautions
WARNING
Congratulations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The Issue
W
If you are like most consumers, you have a TV in your
home. Many homes, in fact, have more than one TV.
The home theater entertainment experience is a growing
trend, and larger TVs are popular purchases; however, they are
not always supported on the proper TV stands.
W
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
W
Sometimes TVs are improperly secured or inappropriately
situated on dressers, bookcases, shelves, desks, audio
speakers, chests, or carts. As a result, TVs may fall over,
causing unnecessary injury.
The lightning symbol in the triangle tells you that
the voltage inside this product may be strong enough
to cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.
Toshiba Cares!
The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.
W
The consumer electronics industry is
committed to making home
entertainment enjoyable and safe.
NOTE TO CATV INSTALLERS
W
The Consumer Electronics
This is a reminder to call the CATV system installer’s attention
to Article 820-40 of the NEC, which provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical. For
additional antenna grounding information, see items 27 and 28
on page 4.
Association formed the Home
Entertainment Support Safety
Committee, comprised of TV and
consumer electronics furniture
manufacturers, to advocate
children’s safety and educate
consumers and their families about
television safety.
Lamp Unit Replacement
CAUTION: HOT SURFACE!
Tune Into Safety
The temperature of the lamp
immediately after use
exceeds 392°F (200°C).
W One size does NOT fit all! Use appropriate
furniture large enough to support the weight of
your TV (and other electronic components).
Touching the lamp before it has
cooled will result in severe burns. ALLOW THE LAMP TO
COOL FOR AT LEAST ONE (1) HOUR BEFORE REPLACING IT.
W
Use appropriate angle braces, straps, and anchors to secure
your furniture to the wall (but never screw anything directly
into the TV).
Carefully read and understand the other enclosed
instructions for proper use of this product.
The lamp in this product has a limited service life. The length
of service life varies depending on product use and user
settings. If you use the lamp beyond its service life:
•you may notice a reduction in the colors and/or brightness of
the picture, at which time you should replace the lamp unit;
and
W
W
Do not allow children to climb on or play with furniture
and TVs.
W
• the strength of the quartz glass in the lamp will be reduced
and the lamp may rupture. If the lamp ruptures, the TV will
not operate until the lamp unit is replaced.
Avoid placing any item on top of your TV (such as a VCR,
remote control, or toy) that a curious child may reach for.
Remember that children can become excited while watching
a program and can potentially push or pull a TV over.
Share our safety message about this hidden hazard of the
home with your family and friends. Thank you!
W
Note: The lamp unit is designed so broken lamp glass
remains securely inside the lamp unit.
See pages 46-48
.
W
•Dispose of the used lamp unit by the approved method for
your area.
2500 Wilson Blvd.
Note: The lamp unit contains mercury. Disposal of mercury may
be regulated due to environmental considerations. For disposal or
recycling information, contact your local authorities or the
Electronics Industries Alliance (www.eiae.org).
Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690
www.CE.org
CEA is the Sponsor, Producer and
Manager of the International CES
®
P A G E 2
Download from Www.Somanuals.com. All Manuals Search And Download.
562C_2~5(2)_en 90/6/18 1:15 PM Page 3
Important Safety Instructions
Installation, Care, and Service
Installation
Follow these recommendations and precautions and heed all
warnings when installing your TV:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
17) Never modify this equipment. Changes or modifications may
void: a) the warranty, and b) the user’s authority to operate
this equipment under the rules of the Federal
Communications Commission.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
18)
DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
two blades and a third grounding
prong. The wide blade or the third
Wide plug
19) Never place or store the TV in direct sunlight; hot, humid
areas; areas subject to excessive dust or vibration; or
locations with temperatures at or below 41°F (5°C).
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
20) Always place the TV on the floor or a sturdy, level, stable
surface that can support the weight of the unit.
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.
21) Never expose the apparatus to dripping or splashing or
place items such as vases, aquariums, any other item filled
with liquid, or candles on top of the TV.
11) Only use attachments/accessories specified by the
manufacturer.
22) Always place the back of the television at least one (1)
inch away from any vertical surface (such as a wall) to
allow proper ventilation.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
23) Never block or cover the slots or openings in the TV cabinet
back, bottom, and sides. Never place the TV:
•on a bed, sofa, rug, or similar surface;
•too close to drapes, curtains, or walls; or
13) Unplug this apparatus during lighting storms or when
unused for long periods of time.
•in a confined space such as a bookcase, built-in cabinet,
or any other place with poor ventilation.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
apparatus, or the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
This applies to all items except those specified on pages
46-48 of this manual.
The slots and openings are provided to protect the TV from
overheating and to help maintain reliable operation of the
TV.
24) Never allow anything to rest on or roll over the power cord,
and never place the TV where the power cord is subject to
wear or abuse.
15) CAUTION: To reduce the risk of electric shock, do not use
the polarized plug with an extension cord, receptacle, or
other outlet unless the blades can be inserted completely
to prevent blade exposure.
25) Never overload wall outlets and extension cords.
26) Always operate this equipment from a 120 VAC, 60 Hz
power source only.
16) WARNING: This product contains a lamp to project the
picture, and requires special safety precautions:
• See pages 46-48 for instructions on lamp unit
replacement.
(continued on next page)
• DO NOT attempt to service this product except as
specified on pages 46-48. The only user-serviceable
item in this product is the lamp unit.
P A G E 3
Download from Www.Somanuals.com. All Manuals Search And Download.
562C_2~5(2)_en 90/6/18 1:15 PM Page 4
Installation (cont. from previous page)
Care (cont. from previous column)
33) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
27) Always make sure the antenna system is properly grounded
to provide adequate protection against voltage surges and
built-up static charges (see Section 810 of the National
Electric Code).
34)During normal use, the TV may make occasional snapping or
popping sounds. This is normal, especially when the unit is
being turned on or off. If these sounds become frequent or
continuous, unplug the power cord
Antenna lead-in wire
Antenna discharge unit
(NEC Section 810-20)
Ground clamp
and contact a Toshiba Authorized Service Center.
TM
35) Special care for DLP (digital light processing) units:
Grounding conductors
(NEC Section 810-21)
•
Lamp—The lamp in this product has a limited service life.
The length of service life varies depending on product use
or user settings. If you use the lamp beyond its service
life:
Electric service equipment
Power service grounding
electrode system (NEC Art 250 Part H)
Ground clamps
- you may notice a reduction in the colors and/or
brightness of the picture, at which time you should
replace the lamp unit; and
28)
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH!
- the strength of the quartz glass in the lamp will be
reduced and the lamp may rupture. If the lamp ruptures,
the TV will not operate until the lamp unit is replaced.
• Use extreme care to make sure you are never in
a position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never locate the antenna near
overhead power lines or other electrical circuits.
•Never attempt to install any of the following during
lightning activity:
See pages 46-48.
Note:
• The lamp unit is designed so broken lamp glass remains
securely inside the lamp unit.
• The lamp unit contains mercury. Disposal of
mercury may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or the
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.
Electronics Industries Alliance (www.eiae.org).
Care
• Dispose of the used lamp unit by the approved method for
your area.
For better performance and safer operation of your TOSHIBA TV,
follow these recommendations and precautions:
Service
29) Always sit approximately 10–25 feet away from the TV and
as directly in front of it as possible. The picture can appear
dull if you sit too far to the left or right of the TV, or if
sunlight or room lights reflect on the screen. Turn the TV
off to check for reflections on the screen, and then remove
the source of reflections while viewing the TV.
36
)
WARNING: RISK OF ELECTRIC SHOCK!
Never attempt to service the TV yourself,
except as specified on pages 45-47.
Opening and removing the covers may expose you to
dangerous voltage or other hazards. Failure to follow this
WARNING may result in death or serious injury. Refer all
servicing not specified in this manual to a Toshiba Authorized
Service Center.
30) Always unplug the TV before cleaning. Never use liquid or
aerosol cleaners. Clean only with a dry cloth.
Do not spray volatile compounds such as insecticide on the
cabinet. This may cause a discoloration or damage of the
cabinet.
37) If you have the TV serviced:
•Ask the service technician to use only replacement parts
specified by the manufacturer.
•Upon completion of service, ask the service technician to
perform routine safety checks to determine
31)
WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any
kind into the TV cabinet slots.
that the TV is in safe operating condition.
38) When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the TV.
32) If the air temperature rises suddenly (for example, when
the TV is first delivered), condensation may form on the
lenses. This can make the picture appear distorted or the
color appear faded. If this happens, turn off the TV for 6 to
7 hours to allow the condensation to evaporate.
Note: The lamp unit contains mercury. Disposal of mercury may
be regulated due to environmental considerations. Dispose of the
used lamp unit by the approved method for your area.
For disposal or recycling information, please contact your local
authorities or the Electronics Industries Alliance (www.eiae.org).
P A G E 4
Download from Www.Somanuals.com. All Manuals Search And Download.
562C_2~5(2)_en 90/6/18 1:15 PM Page 5
TM
Important notes about your DLP projection TV
5) Always sit approximately 10–25 feet away from the TV and as
1) The light source for this TV is a projection lamp unit with a
limited service life. When the lamp wears out, the picture
may become dark or black, or the lamp may fail, at which
time you must replace the lamp unit. See “Lamp unit
replacement” on pages 46-48.
directly in front of it as possible. The picture quality may be
affected by your viewing position and length of viewing time.
If you sit too closely to the TV for too long, you may suffer
from eye fatigue. See item 29 on page 4.
6)
This TV contains several cooling fans to moderate
the internal temperature. You may be able to hear
the fans noise during or after operation.
2) Each time you turn on the TV, it may take up to several
seconds to go from no picture to full picture brightness.
3) The display on this TV is manufactured using an extremely
high level of precision technology; however, an occasional
pixel (dot of light) may show constantly on the screen. This
is a structural property of micro-display projection TV
technology, and is not a sign of malfunction. Such pixels are
not visible when the picture is viewed from a normal viewing
distance (see item 29 on page 4).
7) Always place the back of the television at least one (1) inch
away from any vertical surface (such as a wall) to allow
proper ventilation.
8) Review all safety and operating information in this owner’s
manual before you use your TV.
9) Interactive video games that involve shooting a “gun” type
of joystick at an on-screen target may not work on this TV.
4) Depending on the media you are viewing, it is possible,
although unlikely, that a limited number of viewers may see
a “rainbow effect” on the screen, which can, in rare
instances, result in eye fatigue. This is a rare occurrence
related to technology of this type, and is not a sign of TV
malfunction.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
P A G E 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Important Safety Instructions .TM. . . . . . . . . . . . . . . .2-4 AUDIO Menu Options
®
Important notes about your DLP projection TV . . . . . . .5
Welcome to Toshiba . . . . . . . . . . . . . . . . . . . . . . . . .7
Function Status Indicators . . . . . . . . . . . . . . . . . . . . .7
Step 1. Hook Up TV
Sound mode / Stable sound . . . . . . . . . . . . . . . . . . .30
Front surround / Manual Sound Control . . . . . . . . . . . .31
Stereo/SAP Broadasts Setup . . . . . . . . . . . . . . . . . .32
TIMER Menu Options
Rear Connections Panel . . . . . . . . . . . . . . . . . . . . . . .8
Front Connections Panel . . . . . . . . . . . . . . . . . . . . . .9
ANT/Cable Service Hookup . . . . . . . . . . . . . . . . . . . .10
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . .11
VCR Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .12
DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
RGB-DTV/HDMI-DTV Input . . . . . . . . . . . . . . . . . . . .14
RGB-PC/HDMI-PC Input . . . . . . . . . . . . . . . . . . . . . .15
Monitor Out Setup . . . . . . . . . . . . . . . . . . . . . . . . .16
Remote Control Functions in TV Mode . . . . . . . . . . .17-18
On-Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . .19
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . .20
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21-22
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
On/Off Timer Setup . . . . . . . . . . . . . . . . . . . . . . . .34
Sleep Timer Setup / Auto Off . . . . . . . . . . . . . . . . .35
SPECIAL Menu Options
On-Screen Menu Languages / Key Lock . . . . . . . . . . . 36
Captions Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Caption/Text Mode Selection . . . . . . . . . . . . . . . . . .38
SCREEN Menu Options
Auto Adjustment / Manual Configure . . . . . . . . . . . . .39
Aspect ratio / Cinema Mode Setup . . . . . . . . . . . . . .40
NR / Initializing . . . . . . . . . . . . . . . . . . . . . . . . . .41
LOCK Menu Options
Parental Lock Setup . . . . . . . . . . . . . . . . . . . . . . . .42
Parental Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
PIP/Twin Picture Operation . . . . . . . . . . . . . . . .44-45
POP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Step 2. Customize your TV’s Features
CHANNEL Menu
Turning the TV On . . . . . . . . . . . . . . . . . . . . . . . . .23
Auto Program: Channel Search . . . . . . . . . . . . . . . . .23
Remote control effective range . . . . . . . . . . . . . . . .24
Manual Program
Adding/Delecting Channels . . . . . . . . . . . . . . . . . . . .25
Fine Tuning Adjustment . . . . . . . . . . . . . . . . . . . . .25
Surf list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
PICTURE Menu Options
Step 3. Miscellaneous
Lamp Unit Replacement . . . . . . . . . . . . . . . . . . . .46-48
Programming the Remote . . . . . . . . . . . . . . . . . . . . .49
Programming Codes . . . . . . . . . . . . . . . . . . . . . .50-53
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .54-55
Product Specifications . . . . . . . . . . . . . . . . . . . . . .56
Limited United States Warranty
Picture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Color Temperature Control . . . . . . . . . . . . . . . . . . . .28
ACM / Manual Picture Control . . . . . . . . . . . . . . . . . .29
Limited Canada Warranty
Setup Checklist
Step 1. Make all equipment and source connections.
See pages 10-16.
Step 2. Install batteries in remote control and do a channel search.
See page 23.
Step 3. Adjust TV features and options to your preference.
See contents above.
Note: Design and specifications are subject to change without prior notice.
P A G E 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to Toshiba
Welcome to Toshiba
TM
Congratulations! You have purchased one of the finest DLP projection TVs on the market. The goal of this manual is to
guide you through setting up and operating your Toshiba TV as quickly as possible.
This manual applies to models 44HM85. The model and serial numbers are on the back of your TV. Write these numbers in
the space provided on the front cover of this manual for your records.
Instructions in this manual are based on using the remote control. You can also use the controls on the TV if they have
the same name as those on the remote control.
Please read all the safety and operating instructions carefully, and keep the manual for future reference.
Function Status Indicators
Lamp indicator, operation indicator, and temperature indicator located below the front panel controls,
reveal the operating status of the DLP projection TV.
Operation Indicator
Temperature Indicator
Lamp Indicator
Off
Power cord is not connected.
Red
Power Cord is connected, unit is on standby mode.
TV turns on.
Operation Indicator
Lamp Indicator
Green
Orange (flashing)
Red (flashing)
Preparing operation in standby mode.
There is a problem with the lamp or around it. Contact an
authorized service center.
Red
Lamp life over.
Green (flashing)
Red
The lamp cover is not closed.
The projection TV has shut down due to overheating.
After viewing the phrase “Thermal High Error”.
The projection TV shut down due to the cooling fan trouble.
Contact an authorized service center.
Thermal warning.
Temperature Indicator
Red (flashing)
Orange
P A G E 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Connections Panel
Connecting cables and external equipment to your TV.
COMPONENT
INPUT
1
INPUT
2
(R)
40i40/
576i/576p/
720p/1080i
40i80/
576i/576p/
720p/1080i
AUDIO
VIDEO
(L)/
MONO
MONITOR
OUT
A/V
INPUT
2
A/V
INPUT
1
PC/DTV
(SXGA/
480p/
Y
S-VIDEO
576p/
720p/
PB
S-VIDEO
1080i)
P
R
AV3
VIDEO
(L)
RGB INPUT
(L)
INPUT
U
P
G
R
A
D
E
MONO
P
O
R
T
(L)
AUDIO
(R)
AUDIO
(R)
AUDIO
(R)
DVI
/
RGB INPUT
HDMI INPUT
S-VIDEO In
A connection available with
some high-end equipment
that provides even better
picture quality for Video 2.
COLORSTREAM HD
INPUT 1
INPUT 2
480i/480p/
720p/1080i
480i/480p/
720p/1080i
COLORSTREAM HD 1-2
Video 1 or 2
MONITOR VIDEO 2
VIDEO 1
INPUT
Connect a ColorStream HD video/audio
device to these jacks. Refer to your DVD
manual for further information.
OUT
INPUT
Connects the video sig-
nals from various types of
equipment.
PC/DTV
(XGA/
480p/
720p/
1080i)
Y
P
B
S-VIDEO
P
R
VIDEO
(L)
RGB INPUT
(L)
U
P
G
R
A
D
E
MONO
P
O
R
T
Left/Right Audio
Used for stereo sound
from various types of
equipment.
(L)
AUDIO
(R)
AUDIO
(R)
AUDIO
(R)
HDMI INPUT
HDMI
connect a HDMI signal to
HDMI.
UPGRADE PORT
RGB Input
RF Connector: Antenna
This port is used to upgrade
Connect the TV output con-
nector from a PC/DTV to the
appropriate input port.
Used to connect analog
cable or antenna signals to
the television, either
directly or through your
cable box.
the software version and debug
without changing the hardware.
Be careful not to use this port.
Just contact your dealer or ser-
vice centre.
Mini glossary
JACK
A connection on the back of a TV, VCR, or any other A/V device. This includes the RF jack and the Audio/Video jacks that are color-
coded.
SIGNAL
Picture and sound traveling through cable, or over the air, to your television screen.
P A G E 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Connection Panel
There are four jacks on the left side on your projection TV that
make connecting Audio/Video devices like video games and cam-
corders very simple.
The jacks are like those found on the back jack connection panel.
This means that most equipment that connects to those types of
jacks on the rear jackpack, may be connected to the front con-
nection panel.
To use the front jacks as the signal source, select them using
Main Input menu as described on page 44. They will be named
“Front Video” in the Main Input menu.
If you input both Front Video and S-
Video, only the S-Video will work.
W
If you’re connecting a video game
W
device, make sure to change the
picture settings with the Picture Mode
option in the PICTURE menu (see
page 27).
Front A/V Panel
Left/Right Audio
Used for stereo sound
from various types of
equipment.
(R)
AUDIO
(L)/
MONO
VIDEO
Video
Connects the video
signals from any
S-VIDEO
S-Video
FRONT A/V
A connection available on
some very high-end equipment
that provides better picture
quality than video input.
piece of equipment.
Mini glossary
A/V CABLES Audio/Video cables. Three cable connector—Right audio (red), Left audio (white), and Video (yellow). A/V cables are used for stereo
playback of videocassettes and for higher quality picture and sound from other A/V devices.
A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television).
P A G E 9
Download from Www.Somanuals.com. All Manuals Search And Download.
ANT / Cable Service Hookup
Cable TV
Wall Jack Panel
Connect an antenna or cable service to your
TV as shown.
1
Antenna
Turn to page 23 to do a channel search
with Auto program for Ant/Cable connec-
tion(s).
2
RF Coaxial Wire
(75 ohm)
RF Coaxial Wire
(75 ohm)
COLORSTREAM HD
INPUT
INPUT
2
1
480i/480p/
720p/1080i
480i/480p/
720p/1080i
Y
P
B
PR
(L)
AUDIO
(R)
If you receive your RF signal
W
through an antenna that is several
years old and connects with two
small prongs, you will need to pur-
chase a 300 to 75 ohm adapter. It
should be available from your local
electronics dealer.
Caution: RISK OF EQUIPMENT DAMAGE!
Never plug in any power cords until you have
finished connecting all equipment.
We recommend using a 75 ohm
W
cable for your antenna connections
in order to prevent
interference.
For best signal reception, it is recommended to have your Antenna professionally adjusted.
P A G E 1 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Box Connections
Cable TV
Wall Jack Panel
Locate the output jack on the back of
1
your cable box. Connect this to the
Antenna jack on the back of your TV.
Or find the composite video and audio
jacks on the back of your cable box, and
connect them following the instructions
provided with your equipment.
In
Out
Output
Switch
3
4
This can be combined with any other
equipment you may want to hook up.
RF Coaxial Wire
(75 ohm)
Cable Box
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
S-VIDEO
VIDEO
(L)
Audio
Video
MONO
R
L
TV
AUDIO
(R)
VCR
If you’re using a cable box, leave the TV on
channel 3 or 4 and use your cable box to
change channels.
W
When you use a converter box with your TV, the
remote control will not operate some features,
W
such as programming your favorite channels,
labeling channels, and locking channels.
P A G E 1 1
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Connections
Locate the Antenna jack on the
1
back of your TV. Connect this to
RF out jack on the back of your
VCR.
Or, find the composite video and
audio jacks on the back of your
VCR, and connect them following
the instructions provided with
your equipment.
Cable TV
Wall Jack Panel
You may connect either the com-
posite video or the S-Video cables
to your TV. (Do not connect both
the composite and the S-Video
cables. In the event that you con-
nect both composite and the S-
Video cables, only the S-Video will
work.)
Antenna
Round Wire
(75 ohm)
RF Coaxial Wire
(75 ohm)
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
S-VIDEO
Back AV Panel
VIDEO
(L)
Output
Switch
In
MONO
3
4
Out
S-Video
Audio
Video
AUDIO
(R)
R
L
A/V cables
not included
with TV
VCR
To hear stereo sound from cable or your VCR,
you will need to connect A/V cables as well as
the wire that runs from the VCR to your TV.
W
W
The unauthorized recording, use distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
If you want to receive your signals on Channel
3 or 4, locate the Out to TV jack on your VCR.
Connect a cable from the Out to TV jack to the
Antenna In jack on the back of your TV.
P A G E 1 2
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Player
Find the audio and ColorStream
1
HD or S-Video jacks on the back of
your DVD Player and connect them
following the instructions provided
with your equipment.
You may connect either the com-
posite video or the S-Video cables
to your TV. Do not connect both
the composite and the S-Video.
DVD Player
Some high-end DVD players use a
picture reproduction system
called “COLORSTREAM HD Video.”
If your DVD player has COL-
ORSTREAM HD output, use the
connectors marked
Back AV Panel
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
Dolby Digital
Audio
S-Video
Component Video
Out
L
R
COLORSTREAM HD
INPUT 1
INPUT 2
S-VIDEO
“COLORSTREAM HD 1/2” on the
jack panel. Please refer to your
DVD manual for proper installa-
tion.
480i/480p/
720p/1080i
480i/480p/
720p/1080i
VIDEO
(L)
MONO
Y
AUDIO
(R)
P
B
P
R
(L)
AUDIO
(R)
A/V Cables
Not included
with TV
COLORSTREAM HD 1 (or 2) Input
• COLORSTREAM HD Input ports
Connect DVD player jacks to Monitor COL-
ORSTREAM HD input jacks as indicated below.
Y
PB
PR
1920X1080i
1280X720p
720X480p
720X480i
COLORSTREAM HD input jacks
Y
PB
PR
on the Monitor
Pr
R-Y
Cr
Y
Y
Y
Y
Pb
B-Y
Cb
Video output jacks
on DVD player
PR
PB
Mini glossary
ColorStream HD VIDEO
Some video equipment uses three separate lines (Y, PB, PR) to more precisely reproduce images. Your video equipment
manual will explain how this relates to your equipment.
P A G E 1 3
Download from Www.Somanuals.com. All Manuals Search And Download.
RGB-DTV/HDMI-DTV Input
DBS Receiver
Find the audio and Y, PB, PR/RGB, HDMI
1
2
jacks on the back of your DBS receiver and
connect them following the instructions
provided with your equipment.
Component Out Dolby Digital
Audio
Y
Pb Pr
Out
L
R
COLORSTREAM HD
INPUT
1
INPUT
2
480i/480p/
720p/1080i
480i/480p/
720p/1080i
Connect these cables to your TV as shown.
Y
P
B
A/V Cables
Not included
with TV
P
R
)
AUDIO
R)
DBS Receiver
COLORSTREAM HD
INPUT
2
INPUT
1
Audio
Dolby Digital
Out
L
R
480i/480p/
720p/1080i
480i/480p/
720p/1080i
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
PC/DTV
Y
(XGA/
PB
S-VIDEO
P
R
VIDEO
(L)
RGB INPUT
(
U
P
G
R
A
D
E
MONO
P
O
R
T
(L)
AUDIO
or
AUDIO
(R)
AUDIO
(R)
A/V Cables
Not included
with TV
HDMI INPUT
The DTV shows the sharpest picture in 720p mode.
This TV supports HDCP (High-bandwidth Digital Content
W
W
W
Protection) protocol for HDMI-DTV (480p, 720p, 1080i) mode.
Select RGB-DTV/HDMI-DTV Source and press ENTER. Use UP/DOWN
arrows to select the desired options (H-Position/ V-Position) and then
use LEFT/RIGHT arrows to make appropriate adjustments.
RGB-DTV/HDMI-DTV
Signal COLORSTREAM HD1 COLORSTREAM HD2 RGB-DTV/HDMI-DTV
HD-SET TOP
1920x1080i
1280x720P
720x480P
480i
480p
720p
1080i
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
P A G E 1 4
Download from Www.Somanuals.com. All Manuals Search And Download.
RGB-PC/HDMI-PC Input
Find the audio and RGB or DVI jacks on the
1
2
back of your PC and then connect them fol-
lowing the instructions provided with your
equipment.
Connect these cables to your TV as shown.
Computer
COLORSTREAM HD
INPUT 1
INPUT 2
480i/480p/
720p/1080i
480i/480p/
720p/1080i
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
PC/DTV
(XGA/
Y
P
B
S-VIDEO
P
R
VIDEO
(L)
RGB INPUT
()
MONO
U
P
G
R
A
D
E
P
O
R
T
(L)
AUDIO
)
AUDIO
(R)
AUDIO
(R)
HDMI INPUT
Select RGB-PC Source and press ENTER. Use UP/DOWN arrows to
W
select the desired options (Phase/H Size/V Size/H Position/V
Position) and then use LEFT/RIGHT arrow to make appropriate
adjustments.
RGB-PC/HDMI-PC Input
- Horizontal size, Vertical size, Horizontal position and Vertical posi-
tion: Based on the input mode (resolution), the adjustment
ranges may change.
MODE
Resolution Horizontal
Vertical
Text
640x350
640x480
640x480
640x480
640x480
800x600
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1024x768
31.5KHz
31.5KHz
37.9KHz
37.5KHz
43.3KHz
35.2KHz
37.9KHz
48.1KHz
46.9KHz
53.7KHz
48.4KHz
56.5KHz
60.0KHz
68.7KHz
70Hz
60Hz
72Hz
75Hz
85Hz
56Hz
60Hz
72Hz
75Hz
85Hz
60Hz
70Hz
75Hz
85Hz
- PHASE: Removes any horizontal noise and clears up or sharpens
the character images. Adjustment range is 0~63.
VGA
Synchronization input form: Signals are separate.
W
W
Because HDMI is an evolving technology, some devices connected via
the HDMI/IN may not operate properly with the TV.
SVGA
XGA
You need HDMI-to-DVI adapter cable to connect DVI device to this TV.
In HDMI-PC mode, H position, V pisition are only worked.
W
W
P A G E 1 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor Out Setup
Your TV has a special signal output capa-
bility which allows you to hook up a sec-
ond TV or monitor.
1
2
Just connect the second TV or monitor to
the MONITOR OUT Audio/Video jacks locat-
ed on the back of your TV. See the
Operating Manual of the second TV or
monitor for further details regarding that
device’s input settings.
Second TV
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
S-VIDEO
VIDEO
(L)
MONO
U
P
G
R
A
D
E
P
O
R
T
S-Video
Audio
Video
AUDIO
(R)
HDMI INPUT
A/V Cables
Not included
with TV
COLORSTREAM HD1 1 - 2 and RGB-DTV/PC and
HDMI-DTV/PC input sources for main picture
cannot be used for Monitor Out.
W
P A G E 1 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Functions in TV Mode
MODE
Selects the remote operating mode:
TV, VCR, Cable, DVD and Satellite.
Select other operating modes, for
the remote to control external
devices.
INDICATOR LIGHTS
Show active remote mode
every time any button is
pressed.
VCR CABLE DVD
TV
SAT
TV/VIDEO
Selects: Analog, Video1, Video2,
Front Video, Colorstream HD 1-2
and RGB and HDMI input sources
.
FRONT
Selects the front video signal if a
device, such as a camcorder or
game player, is connected to the
front video input jack.
LIGHT
MODE
LIGHT
POWER
Illuminates the remote control
keys.
TV/VIDEO
C/S HD1
FRONT
HDMI
RGB
HDMI
Selects: HDMI-DTV and HDMI-
PC input sources.
C/S HD2
1
4
2
5
8
0
3
6
9
MUTE
Switches the sound on or off
SURF
Scrolls the Surf channel list.
SAP
7
Selects: Mono, Stereo, and SAP.
VIDEO
Adjusts the factory preset pic-
ture according to the room.
CH RTN
ENTER
VOL
CH
MUTE
SURF
PIP
Toggles between PIP, POP
(Picture-outside-Picture) and
Twin picture mode.
SAP
VIDEO
SWAP
Switches the picture from
PIP, POP, or twin picture to
the main screen.
PIP
PIPCH- PIPCH+ SWAP
PIPCH-
Changes to next lower
PIP channel
PIPCH+
Changes to next higher PIP
channel.
CC
FREEZE
PIP INPUT
PIC SIZE
THUMBSTICK
Allows you to navigate the on-screen
menus and to adjust the system set-
FREEZE
Freezes the currently-viewed picture.
Sub picture is frozen in PIP/DW pic-
ture mode.
tings and preferences, by moving to
D
an option withF
G
and selecting the
highliEghted option with
.
MENU
EXIT
REC
EXIT
MENU
Brings up the main menu
to the screen.
Clears all on-screen displays
and returns to TV viewing
from any menu.
PLAY
REW
PAUSE STOP
FF
SKIP
P A G E 1 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Functions in TV Mode
VCR CABLE DVD
TV
SAT
MODE
LIGHT
POWER
POWER
Turns your TV or any other
programmed equipment on or
off, depending on mode.
TV/VIDEO
C/S HD1
FRONT
HDMI
RGB
C/S HD2
C/S HD1,HD2
Selects ColorStream HD signal
sources, such as DVD or HD receiver.
RGB
Selects: RGB-DTV and RGB-PC
input sources.
1
4
2
5
8
0
3
6
9
NUMBER KEYPAD
For direct channel selection and
programming functions.
7
ENTER
When in the menu system and
other on-screen displays, selects
highlighted options.
CH RTN
Tunes to the last channel
viewed.
CH RTN
ENTER
VOL
CH
MUTE
SURF
SAP
VIDEO
CHANNEL UP/DOWN
Scrolls through available chan-
nels in EZ Scan memory.
VOLUME UP/DOWN
Increases/decreases the sound level.
PIP
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
PIC SIZE
Changes the screen format or
aspect ratio.
PIP INPUT
Selects the input source for the
sub picture.
CC
Selects a closed caption mode for
displaying captioning information
if available on program.
ENTER
When in the menu system and
other on-screen displays,
selects highlighted options.
MENU
EXIT
REC
PLAY
REW
PAUSE STOP
RECORD, PAUSE, REW, FFWD,
PLAY, STOP
Control the functions on your VCR.
FF
SKIP
SKIP
Playing CDs: Selects songs.
Playing DVDs: Selects movie
chapters.
P A G E 1 8
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Displays
This page describes your on-screen display and information banner options.
Main Channel Display
Displays current channel number.
PIP Display
This display
appears when PIP
is active.
TV 13
CATV 16
11:17 AM
Mute
10
Mute
Appears when
sound is
muted.
Volume
Volume level is displayed while
adjusting the sound.
P A G E 1 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Controls
1
3
6
8
2
5
4
7
POWER
1
MENU
2
ENTER (Same as ENTER button on your remote
control)
3
VOLUME UP / DOWN
4
5
6
CHANNEL UP / DOWN
Operation indicator. (See page 7).
Lamp indicator. (See page 7).
Temperature indicator. (See page 7).
See menu pages for instructions on using the on-
screen menus.
W
W
W
7
8
The POWER, MENU, ENTER, VOLUME, and CHANNEL
buttons work just as they do on your remote control.
If TV is moved from cold to normal room tempera-
ture, condensation may form inside the TV, wait 6~7
hours for the TV to adjust to room temperature
before turning it on.
P A G E 2 0
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI
- HDMI , the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing.
- This set can receive the High-Definition Multimedia Interface (HDMI) or Input of Digital Visual Interface(DVI).
- This set supports HDCP (High-bandwidth Digital Contents Protection) Protocol for the set (480p, 720p, 1080i)
modes.
- When you Connect with HDMI Source Devices (DVD Player or Set Top Box or PC) supporting Auto HDMI func-
tion, automatically, support Plug & Play and then set the HDMI Source Devices (640 x 480p). After reading in
HDMI Source Devices using Display Data Channel(DDC) Protocol, EDID stored in the set is used. If HDMI Source
Devices not supported Auto HDMI is been, the Resolution is set, manually.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
- When Source Devices have DVI Output Connector, you must connect audio with separated cable.(Refer to <How
to connect>)
How to connect
1. When Source Devices (DVD Player or Set Top Box) support HDMI.
- If Source Devices have HDMI Output Connector, Source Devices connect to the set with HDMI Cable .(not sup-
plied with the product).
- If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in 1280 x 720p. But
if the resolution has to be changed manually refer to the source devices owner manual.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- Because HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using HDMI Cable.
2. When Source Devices (DVD Player or Set Top Box) supports DVI.
- If Source Devices have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not
supplied with the product).
- If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1280 x 720p. But
if the resolution has to be changed manually refer to the source devices owner manual.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- In this case, Audio use other cable. When Source Devices have Analog Audio Output Connector, RGB/DVI Audio
Input of the set connect to Audio Cable (not supplied with the product). And then you can listen to normal
Audio.
3. When PC supports DVI.
- If PC have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not supplied with
the product).
- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
- Use the the set’s HDMI (VIDEO) for video connections, depending on your PC connector.
- If the graphics card on the PC does not output analog RGB and DVI simultaneously, connect only one of either
RGB Input or HDMI Input to display the PC on the set.
- If he graphics card on the PC does output analog RGB and DVI simultaneously, change the input to either RGB
Input or HDMI Input; (the other mode is set to Plug and Play automatically by the set.)
- Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required.
- In this case, Audio use other cable. When PC (or sound card of PC) have Analog Audio Output Connector, RGB/DVI
Audio Input of the set connect to Analog Audio Cable (not supplied with the product). And then you can listen
to normal Audio.
P A G E 2 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Cable sample
HDMI Cable
(not supplied with the product)
Analog Audio Cable (RCA type)
(not supplied with the product)
Analog Audio Cable (Stereo to RCA type)
(not supplied with the product)
HDMI to DVI Cable
(not supplied with the product)
How to use
1. Connect the HDMI Source Devices(DVD Player or Set Top Box or PC) and the set.
2. Turn on the display by pressing the POWER button on the set and HDMI Source Devices remote control.
3. Select HDMI Input source in Main Input option of PIP/DW menu.
4. Check the image on your set. There may be noise associated with the resolution, vertical pattern, contrast or
brightness in HDMI Source Devices. If noise is present, change the HDMI Source Devices to another resolution,
change the refresh rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh
rate of the PC graphics card can not changed, change the PC graphics card or consult the manufacturer of the PC
graphics card.
Notes:
- Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.
- Avoid keeping a fixed image on the set screen for a long period of time. The fixed image may become permanent-
ly imprinted on the screen. Use the Orbiter screen saver when possible.
- When Source Devices connected HDMI Input, output PC Resolution(VGA, SVGA, XGA), Position, Size may not fit to
Screen. As shown the lower picture, press the MENU button to adjust the screen Position of the set and contact an
PC graphics card service center.
- When Source Devices connected HDMI Input output the set Resolution(480p, 720p, 1080i), the set Display fit
EIA/CEA-861-B Specification to Screen. If not, refer to the Manual of HDMI Source Devices or contact your service
center.
- In case HDMI Source Devices is not connected Cable or poor cable connection, "No Signal" OSD display in HDMI
Input. And In case of Video Resolution not supported the set output in HDMI Source Devices, "No Signal" OSD dis-
play. Refer to the Manual of HDMI Source Devices or contact your service center.
P A G E 2 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the TV On
1. Refer to pages 10-16 to connect external equipment to your TV. If you have done so, plug
in your TV to a standard (non-switched) 120V 60Hz power outlet.
2. If you have done so, remove the back of the remote and install in two AA batteries. Make
sure batteries are properly installed (check the +/– symbols).
back of
remote
3. With the remote control in hand, press the POWER button to turn your TV on.
Caution: Never throw batteries into a fire.
Auto Program: Channel Search
VCR CABLE DVD
TV
SAT
- Redo Auto Program if the DLP projection TV is ever moved to
another location.
MODE
LIGHT
POWER
- Auto Program will search for channels only through the ANT IN
jack.
- If channels numbers for broadcast over-the air TV and cable TV are
duplicated where different channels have the same number, press
the same number buttons again to toggle between:
3
TV/VIDEO
C/S HD1
FRONT
HDMI
RGB
C/S HD2
1
4
2
5
8
0
3
6
9
Cable TV Channels
Broadcast TV Channels
(For example, press 17 to go to the channel, press 17 again to go
to the duplicated channel.)
7
CH RTN
ENTER
6
VOL
CH
MUTE
SURF
CHANNEL
Auto program
Manual program
Surf list
G
To start
SAP
VIDEO
PICTURE
AUDIO
PIP
PIPCH- PIPCH+ SWAP
TIMER
CC
FREEZE
PIP INPUT
PIC SIZE
SPECIAL
SCREEN
PIP/DW
LOCK
4/5/6
5/6
6
Menu Prev.
MENU
EXIT
REC
4
PLAY
REW
PAUSE STOP
4.Press the MENU button and then use D / E button to select the
4/5/6
CHANNEL menu.
FF
SKIP
5.Press the G button and then use D / E button to select Auto
program.
6.Press ENTER or the G button to start Auto program channel
search.
If you want to stop auto programming, press the ENTER but-
ton. Only the channels found up to at that time are memo-
rized.
P A G E 2 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control effective range
30°
30°
9m
12m
TV
VCR CABLE DVD
SAT
MODE
LIGHT
POWER
TV/VIDEO
C/S HD1
FRONT
DVI
C/S HD2
RGB
1
4
2
5
8
0
3
6
9
7
ENTER
C
H
R
T
N
VOL
CH
MUTE
SURF
SAP
VIDEO
PIP
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
MENU
EXIT
REC
PLAY PAUSE STOP
REW
FF
SKIP
For optimum performance, aim the remote control directly at the TV and make sure there is no obstruction
between the remote control and the TV.
• If your Toshiba TV remote control does not operate all
W
the features of your other device, use the original
remote control for that device.
• Dispose of batteries in a designated disposal area.
• Attention should be drawn to the environmental
aspects of battery disposal.
• Do not mix battery types or combine used batteries
with new ones.
• If the remote control does not operate correctly, or if
the operating range becomes reduced, replace both
batteries with new ones.
• If the batteries are dead or if you will not use the
remote control for a long time, remote the batteries to
prevent battery acid from leaking into the battery
compartment.
P A G E 2 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual program
CHANNEL
PICTURE
AUDIO
Auto program
Manual program
Surf list
G
TV
2
On
0
Memory
Fine
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
Adding/Deleting Channels
- You can add or delete channels from the channel scan manually.
1. Press the MENU button and then use D / E button to select the CHANNEL menu.
2. Press the G button and then use D / E button to select Manual program.
3. Press the G button and then use D / E button to select Memory.
4. Use the F / G button to select On or Off.
5. Press the ENTER button to save.
Fine Tuning Adjustment
- Use this function to correct the picture's instability and condition if it is poor.
CH RTN
ENTER
0
5
VOL
CH
MUTE
SURF
1. Press the MENU button and then use
button to select the CHANNEL
/ E
D
menu.
SAP
PIP
VIDEO
2. Press the G button and then use D / E button to select Manual program.
3. Press the G button and then use D / E button to select Fine.
4. Use the F / G button to adjust the picture to your preference.
5. Press the ENTER button to save.
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
5
1/2/3
2/3/4
Notes
4
• To remove fine tuning from a channel, reprogram the finely-tuned
channel with Auto program or Manual Program.
• If a finely-tuned channel is memorized, the color of the channel
number changes to yellow.
MENU
EXIT
REC
1
PLAY
REW
PAUSE STOP
1/2/3
FF
SKIP
P A G E 2 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Surf list
- Surf Channels is a convenient feature that lets you quickly scan up to 8
channels of your choice without having to wait for the TV to scan through
all the in-between channels.
CHANNEL
PICTURE
AUDIO
Auto program
Manual program
Surf list
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
G
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use D / E button to select the CHANNEL
menu.
2. Press the G button and then use D / E button to select Surf list.
3. Press the G button and then use D / E button to select the first surf chan-
nel position.
4. Use the F / G button to set the desired channel number for first surf chan-
nel.
5. Repeat steps 3 to 4 to memorize other surf channels.
6. Press the ENTER button to save.
CH RTN
ENTER
0
6
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
• To tune to a surf channel, press the SURF button repeatedly. The eight
favorite channels appear on the screen in numerical order.
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
6
1~4
2/3/4
4
MENU
EXIT
REC
1
PLAY
REW
PAUSE STOP
1~4
FF
SKIP
P A G E 2 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Mode
Adjust the picture appearance to suit your preference and viewing situations.
- You can manually adjust the levels for the picture quality settings, such as Contrast, Brightness, Color, etc.
- You can also select a preset value from the Picture Mode menu based on the category of the program.
Daylight
Standard
Night time
Movie
CHANNEL
PICTURE
AUDIO
Picture Mode
Color temporature
ACM
G
Contrast
Brightness
Color
100
55
55
60
0
Video game
Sports
TIMER
Off
Sharpness
Tint
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use D
button to select the PICTURE
/ E
menu.
2. Press the G button and then use D / E button to select Picture Mode.
3. Press the G button and then use D / E button to set Daylight, Standard,
Night time, Movie, Video game and Sports settings are preset for good
picture quality at the factory and cannot be changed.
4. Press the ENTER button to save.
CH RTN
ENTER
0
4
VOL
CH
MUTE
SURF
• Daylight Increases the levels of all picture settings to fit daylight
conditions.
Standard Restores the picture levels to their original settings.
Night Time Decreases the levels of all picture settings to fit Night
Time conditions.
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
Movie Adjusts Video settings to enhance Movie viewing. Contrast and
Sharpness levels are lowered so that the picture looks warm and soft.
Video Game Sets the picture settings to the levels that are more suit-
able to enjoy games. Color, Contrast, and Sharpness levels are lowered
to reduce the amount of glare.
CC
FREEZE
PIP INPUT
PIC SIZE
4
1/2/3
2/3
Sports Sets the picture settings to the levels that are more suitable to
view sporting events. Contrast and Color levels are raised so that an
action scene appears clear and brilliant.
MENU
EXIT
REC
Off Lets you adjust the picture manually to your preferences.
1
PLAY
REW
PAUSE STOP
1/2/3
FF
SKIP
P A G E 2 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Temporature Control
Auto Color Temperature Control
- To initialize values (reset to default settings), select the Normal option.
CHANNEL
Picture Mode
Cool
Normal
Warm
Off
Color temporature G
PICTURE
AUDIO
ACM
Contrast
Brightness
Color
100
55
55
60
0
TIMER
Red
0
0
0
Green
Blue
Sharpness
Tint
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
CH RTN
ENTER
0
4
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
1. Press the MENU button and then use
menu.
button to select the PICTURE
/ E
D
CC
FREEZE
PIP INPUT
PIC SIZE
2. Press the G button and then use D / E button to select Color temporature.
1/2/3
2/3
4
3. Press the G button and then use D / E button to select either: Cool
(Preset), Normal (Default), or Warm (Preset).
MENU
EXIT
REC
1/2/3
4. Press the ENTER button to save.
1
PLAY
REW
PAUSE STOP
FF
SKIP
Manual Color Temperature Control
(Color temporature set to Off option)
CH RTN
ENTER
0
- You can adjust red, green, or blue to any color temperature you prefer.
6
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
1. Press the MENU button and then use
button to select the PICTURE
/ E
D
PIPCH- PIPCH+ SWAP
menu.
2. Press the G button and then use D / E button to select Color temporature.
CC
FREEZE
PIP INPUT
PIC SIZE
3. Press the G button and then use D / E button to select Off.
6
1~4
2~5
4. Press the G button and then use D / E button to select Red, Green or
Blue.
5
5. Use the F / G button to make appropriate adjustments.
MENU
EXIT
REC
1~4
1
• The adjustment range of Red, Green, and Blue is -30 ~ +30.
PLAY
REW
PAUSE STOP
6. Press the ENTER button to save.
FF
SKIP
P A G E 2 8
Download from Www.Somanuals.com. All Manuals Search And Download.
ACM (Active Color Management)
- Adjust the ACM to select the desired skin colour option.
- This function works in the following mode:
TV, Video 1-2, Front Video Colorstream HD 1-2, RGB-DTV, HDMI-DTV.
CHANNEL
PICTURE
AUDIO
Picture Mode
Color temporature
ACM
G
100
55
Fleshtone
Greentone
Bluetone
0
0
Contrast
Brightness
Color
0
TIMER
55
Sharpness
60
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use
button to select the PICTURE
/ E
D
menu.
2. Press the G button and then use D / E button to select ACM.
3. Press the G button and then use F / G button to make appropriate
adjustments.
4. Press the ENTER button to save.
Manual Picture Control (Picture Mode set to off option)
CH RTN
ENTER
0
4
- You can adjust picture contrast, brightness, color, sharpness, and tint
options to the levels you prefer.
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
CHANNEL
PICTURE
AUDIO
Picture Mode
Color temporature
ACM
CC
FREEZE
PIP INPUT
PIC SIZE
Contrast
Brightness
Color
100 G
55
55
60
0
4
TIMER
1/2
2/3
Sharpness
Tint
SPECIAL
SCREEN
PIP/DW
LOCK
3
MENU
EXIT
REC
1
PLAY
REW
PAUSE STOP
Menu Prev.
1/2
FF
SKIP
1. Press the MENU button and then use
button to select the PICTURE
/ E
D
menu.
2. Press the G button and then use
button to select the desired picture
/ E
D
option (Contrast, Brightness, Color, Sharpness, Tint).
3. Press the G button and then use F / G button to make appropriate adjust-
ments.
4. Press the ENTER button to save.
P A G E 2 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound mode
- Chooes the sound options manually.
CHANNEL
Sound mode
G
Normal
Stadium
News
Stable sound
Front surround
Balance
PICTURE
AUDIO
0
50
50
Music
Theater
Off
Treble
TIMER
Bass
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use D / E button to select the AUDIO menu.
2. Press the G button and then use D / E button to select Sound mode.
3. Press the G button and then use D / E button to select appropriate sound setup.
4. Press the ENTER button to save.
• Normal Restores the sound levels to their original settings.
Stadium Stresses high frequency sounds and front surround sound to create
the sensation you would experience in a stadium.
News Increases high frequency sounds to emphasize the human voice.
Music Increases both high and low frequency sounds to stress the sounds of
musical instruments.
Theater Stresses both high and low frequency sounds, in addition to the front
surround sound, to create the sensation you would experience in a theater.
Off Lets you adjust the Audio menu sound options manually.
CH RTN
ENTER
0
4
4
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
®
Stable sound
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
- Scans for changes in the sound level during commercials, then adjusts the
sound to match
the current audio level of the TV program you are watching.
1/2/3
2/3
3
MENU
EXIT
REC
1
CHANNEL
PICTURE
AUDIO
Sound mode
Stable sound
Front surround
Balance
PLAY
REW
PAUSE STOP
On
Off
G
1/2/3
FF
SKIP
0
50
50
Treble
TIMER
Bass
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use D / E button to select the AUDIO menu.
2. Press the G button and then use D / E button to select Stable sound.
3. Press the G button and then use D / E button to select On or Off.
4. Press the ENTER button to save.
P A G E 3 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Front surround
- Increases the front surround sound to create more open and expanded sound.
CHANNEL
PICTURE
AUDIO
Sound mode
Stable sound
Front surround
Balance
SRS TSXT
3D Echo system
Off
G
0
Treble
50
50
TIMER
Bass
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use D / E button to select the AUDIO menu.
2. Press the G button and then use D / E button to select Front surround.
3. Press the G button and then use D / E button to select SRS TSXT or 3D Echo
system.
4. Press the ENTER button to save.
Manual Sound Control
CH RTN
ENTER
0
4
4
- You can adjust sound options Balance, Treble, and Ba to the levels you prefer.
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
CHANNEL
PICTURE
AUDIO
Sound mode
Stable sound
Front surround
Balance
PIPCH- PIPCH+ SWAP
L
R
0
50
50
CC
FREEZE
PIP INPUT
PIC SIZE
Treble
TIMER
Bass
SPECIAL
SCREEN
PIP/DW
LOCK
1/2/3
2/3
3
MENU
EXIT
REC
Menu Prev.
1
PLAY
REW
PAUSE STOP
1/2/3
FF
SKIP
1. Press the MENU button and then use
button to select the AUDIO
/ E
D
menu.
2. Press the G button and then use
button to select the desired sound
/ E
D
option (Balance, Treble, Bass).
3. Press the G button and then use F / G button to make appropriate
adjustments.
4. Press the ENTER button to save.
• Balance Adjusts the left to right balance of the TV speakers.
Treble Increases or decreases the higher frequency sounds from the TV speak-
ers. Increases in treble, for example, make voice or string sounds stand out.
Bass Increases or decreases the lower frequency sounds from the TV speakers.
P A G E 3 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Stereo/SAP Broadcasts Setup
- The TV can receive MTS (Multichannel Television Sound) stereo programs and any SAP (Secondary Audio
Program) that accompanies the stereo program; if the broadcaster transmits one additional sound signal in
addition to the original one.
- Mono: The primary language is heard from left and right speakers. Signal mode is mono.
- Stereo: The primary language is heard from left and right speakers. Signal mode is stereo.
- SAP: The secondary language is heard from left and right speakers in mono sound.
1. Press the SAP button repeatedly.
Mono
Stereo
SAP
VOL
CH
MUTE
SURF
•Select mono sound mode if the signal is not clear or in poor signal
reception areas.
• Stereo, SAP modes are available only if included on the broadcast
signal.
VIDEO
SAP
PI
PPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
MENU
EXIT
P A G E 3 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock Setup
- Setting the time can be done automatically through the PBS broadcast signal.
- The PBS setup signal includes information for the current time.
- Set the clock manually, if the current time is set incorrectly programed by the auto
clock function.
CHANNEL
Clock
G
Auto
Off timer
On timer
Sleep timer
Auto off
Manual
Time zone
PICTURE
AUDIO
Auto
PBS Channel
TV 2
TIMER
Daylight Saving
Auto
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use D / E button to select the TIMER menu.
2. Press the G button and then use D / E button to select Clock.
3. Press the G button and then use D / E button to select Auto.
CH RTN
ENTER
0
7
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
4. Press the G button and then use D / E button to select the time zone for
your viewing area. Your choices are: Auto, Nfld (New Foundland), Atlantic,
E.S.T. (Eastern Standard Time), C.S.T. (Central Standard Time), M.S.T.
(Mountain Standard Time) and P.S.T. (Pacific Standard Time).
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
5. Press the G button and then use D / E button to set PBS Channel.
7
1
6. Press the G button and then use D / E button to set Daylight Saving Time
Auto, On or Off, depending on whether or not your viewing area observes
Daylight Saving Time.
1~6
2~6
MENU
EXIT
REC
7. Press the ENTER button to save.
PLAY
REW
PAUSE STOP
1~6
FF
SKIP
P A G E 3 3
Download from Www.Somanuals.com. All Manuals Search And Download.
On / Off Timer Setup
- Time function operates only if current time has been set.
- Off-Timer function overrides On-Timer function if they are set both set to the
same time.
- The TV must be in standby mode for the On-Timer to work.
- If you do not press any button within 2 hours after the TV turns on with the On
Timer function, the TV will automatically revert to standby mode.
CHANNEL
PICTURE
AUDIO
Clock
Off timer
On timer
Sleep timer
Auto off
On
Off
6
G
:
30 AM
17
TIMER
Volume
Ch.
TV
2
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use D / E button to select the TIMER
menu.
CH RTN
ENTER
0
7
2. Press the G button and then use
timer.
button to select Off timer or On
/ E
D
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
3. Press the G button and then use D / E button to select On.
• To cancel On/Off timer function, select Off.
PIPCH- PIPCH+ SWAP
4. Press the G button and then use D / E button to set the hour.
5. Press the G button and then use D / E button to set the minutes.
CC
FREEZE
PIP INPUT
PIC SIZE
6. For only On timer function
7
1
Press the G button and then use D / E button to set the sound level at turn-
1~6
2~6
on.
Press the G button and then use D / E button to select the channel at turn-
on.
MENU
EXIT
REC
7. Press the ENTER button to save.
PLAY
REW
PAUSE STOP
1~6
FF
SKIP
P A G E 3 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleeep Timer Setup
- The Sleep Timer turns the TV off at the preset time. Note that this setting
is cleared when the TV is turned off.
CHANNEL
Clock
Off timer
PICTURE
10 min
20 min
30 min
60 min
90 min
120 min
180 min
240 min
Off
On timer
Sleep timer
Auto off
G
AUDIO
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use D / E button to select the TIMER
menu.
2. Press the G button and then use D / E button to select Sleep timer.
3. Press the G button and then use D / E button to choose a preset turn off time.
4. Press the ENTER button to save.
Auto Off
CH RTN
ENTER
0
4
VOL
CH
MUTE
SURF
- If set to on and there is no input signal, the TV turns off automatically after
10 minutes.
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
CHANNEL
PICTURE
AUDIO
Clock
CC
FREEZE
PIP INPUT
PIC SIZE
Off timer
On timer
Sleep timer
Auto off
4
1/2/3
2/3
On
Off
G
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
MENU
EXIT
REC
1
PLAY
REW
PAUSE STOP
1/2/3
Menu Prev.
FF
SKIP
1. Press the MENU button and then use D / E button to select the
TIMER menu.
2. Press the G button and then use D / E button to select Auto off.
3. Press the G button and then use D / E button to select On or Off.
4. Press the ENTER button to save.
P A G E 3 5
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Menu languages
- Select your preferred language for the menus : Englisg, Spanish, or French.
CHANNEL
Language
Key lock
G
English
Español
Français
PICTURE
AUDIO
Captions
Caption / Text
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use D
button to select the SPECIAL menu.
E
/
2. Press the G button and then use D
button to select Language.
E
/
3. Press the G button and then use D E button to select your desired language.
/
From this point on, the on-screen menus will be shown in the language of your choice.
4. Press the ENTER button to save.
key Lock
CH RTN
ENTER
0
4
VOL
CH
MUTE
SURF
- The TV can be set up so that it can only be used with the remote control.
- This feature can be used to prevent unauthorized viewing by locking out the
front panel controls.
- This TV is programmed to remember which option it was last set to even if
you turn the TV off.
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
CHANNEL
PICTURE
AUDIO
Language
Key lock
On
Off
G
4
1/2/3
2/3
Captions
Caption / Text
TIMER
MENU
EXIT
REC
1
SPECIAL
SCREEN
PIP/DW
LOCK
PLAY
REW
PAUSE STOP
1/2/3
FF
SKIP
Menu Prev.
1. Press the MENU button and then use D / E button to select the SPECIAL menu.
2. Press the G button and then use D / E button to select Key lock.
3. Press the G button and then use D / E button to select On or Off.
4. Press the ENTER button to save.
P A G E 3 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Captions Setup
Closed Captions
Closed captioning is a process which converts the audio por-
tion of a television program into written words which then
appear as subtitles on the television screen. Closed captions
allow viewers to read the dialogue and narration of television
programs.
2. An old, bad, or illegally recorded tape is being played.
3. Strong, random signals from a car or airplane interfere with
the TV signal.
4. The signal from the antenna is weak.
5. The program wasn’t captioned when it was produced, trans-
mitted, or taped.
Using Closed Captions
Captions are the subtitles of the dialogue and narration of
television programs. For prerecorded programs, program dia-
logue can be arranged into captions in advance. Its possible
to caption a live program by using a process called real-time
captioning, which creates captions instantly. Real-time cap-
tioning is normally done by professional reporters using a
machine shorthand system and computer for translation into
English.
Using the CC button on the remote control
1. Use the CC button repeatedly to select Caption Off or On.
2. Press the ENTER button to save.
Captioning is an effective sys-
tem for the hearing-impaired,
• You can also adjust Captions in the PICTURE menu.
and it can also aid in teaching
language skills.
PIP
PIPCH- PIPCH+ SWAP
• The picture at left shows a
FOLLOW ME
typical caption.
CC
E
PIP INPUT
PIC S
Caption Tips
• Not all TV broadcasts include closed caption signals.
• Sometimes TV stations broadcast four different caption sig-
nals on the same channel. By selecting CC 1 to CC 2, you
can choose which signal you view. CC 1 is usually the sig-
nal with the captions, while Another mode might show
demonstration or programming information.
MENU
EXIT
• Your TV might not receive caption signals normally in the
following situations.
1. Poor reception conditions are encountered:
• IGNITION:
Picture may flutter, drift, suffer from
black spots, or horizontal streaking.
Usually caused by interference from
automobile ignition systems, neon
lamps, electrical drills, and other elec-
trical appliances.
• GHOSTS:
Ghosts are caused when the TV signal
splits and follows two paths. One is the
direct path and the other is reflected
off tall buildings, hills or other objects.
Changing the direction or position of
the antenna may improve reception.
• SNOW:
If your receiver is located at the weak,
fringe area of a TV signal, your picture
may be marred by small dots. It may be
necessary to install a special antenna
to improve the picture.
P A G E 3 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Caption/Text Mode Selection
Select a closed caption mode for displaying captioning
information when provided on the program.
Captions displays information at any position on the
screen usually the program's dialog.
Text displays information, usually at the bottom position
and is used for a data service, generally not program
related.
CHANNEL
Language
Key lock
PICTURE
CC1
Captions
CC2
Caption / Text
G
AUDIO
TIMER
CC3
CC4
Text1
Text2
Text3
Text4
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use
button to select the SPECIAL
D
/ E
menu.
2. Press the G button and then use D / E button to select Caption / Text.
CH RTN
ENTER
0
4
3. Press the G button and then use button to select caption: CC1, CC2,
D
/ E
VOL
CH
MUTE
SURF
CC3, CC4, Text1, Text2, Text3, or Text4.
SAP
PIP
VIDEO
• CAPTION
The term for the words that scroll across the bottom of the TV screen; usually the
audio portion of the program provided for the hearing impaired.
PIPCH- PIPCH+ SWAP
• TEXT
The term for the words that appear in a large black frame and almost cover the
CC
FREEZE
PIP INPUT
PIC SIZE
entire screen; usually messages provided by the broadcaster.
4
1
1/2/3
2/3
4. Press the ENTER button to save.
MENU
EXIT
REC
PLAY
REW
PAUSE STOP
1/2/3
FF
SKIP
P A G E 3 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Adjustment
- RGB (PC) mode only; This function doesn’t work for RGB-DTV mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your TV is functioning properly but
needs further adjustment.
- The Auto config. is not active in HDMI mode.
CHANNEL
To set
Auto config.
Manual config
Aspect ratio
Cinema
G
PICTURE
AUDIO
NR
TIMER
Reset
SPECIAL
SCREEN
PIP/DW
LOCK
CH RTN
ENTER
0
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
Menu Prev.
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
1. Press the MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select Auto config..
3. Press the G button to run Auto configure.
1/2
2/3
MENU
EXIT
REC
• When Auto config. has finished, OK will be shown on screen.
• If the position of the image is still not correct, try Auto adjustment again.
1/2
1
PLAY
REW
PAUSE STOP
4. In RGB (PC) mode, if the image needs to be adjusted more after using Auto config.,
you can make further adjustments with the Manual config. option.
FF
SKIP
Manual Configure
- If the image still isn’t clear after auto adjustment and especially if characters are still jittery,
adjust the picture Phase manually.
- H position or V position function only work for RGB-DTV/HDMI-DTV/HDMI-PC mode.
- To correct the screen size, adjust H Size, V Size, H Position, V Position.
CH RTN
ENTER
0
5
VOL
CH
MUTE
SURF
CHANNEL
PICTURE
AUDIO
Auto config.
Manual config
Aspect ratio
Cinema
SAP
PIP
VIDEO
G
Phase
0
0
0
0
0
H Size
PIPCH- PIPCH+ SWAP
V Size
NR
TIMER
H Position
V Position
Reset
CC
FREEZE
PIP INPUT
PIC SIZE
SPECIAL
SCREEN
PIP/DW
LOCK
1/2/3
2/3/4
5
4
MENU
EXIT
REC
Menu Prev.
1/2/3
1
PLAY
REW
PAUSE STOP
FF
SKIP
1. Press the MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select Manual config..
3. Press the G button and then use D / E button to to select Phase.
4. Use the F / G button to make appropriate adjustments.
• The Phase adjustment range is 0 ~ 63.
5. Press the ENTER button to save.
P A G E 3 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Aspect ratio
- Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
- Set every aspect ratio for TV, Video, ColorStream HD 480i sources.
- Use 4:3, or 16:9 for other RGB-PC and HDMI-PC sources.
- Horizon is not available for ColorStream HD 1-2 (480p,720p,1080i), DTV
(480p,720p,1080i) sources.
1. Press the PIC SIZE button repeatedly to select the desired picture format. You can
also adjust Aspect ratio in the SCREEN menu.
• 4:3
Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with
black bars appearing at both the left and right sides.
PIP
PIPCH- PIPCH+ SWAP
• 16:9
Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion
to fill the entire screen.
FREEZE
PIP INPUT
P
I
C
SI
ZEC
• Theater wide 1
Choose Horizon when you want to adjust the picture in a non-linear proportion,
that is, more enlarged at both sides, to create a spectacular view.
• Theater wide 2
- Choose when you want to view the picture without any alteration. However, the top
and bottom portions of the picture will be cropped.
MENU
EXIT
Cinema Mode Setup
- Set up the TV for the best picture appearance for viewing movies.
- When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will
adjust 24 fps video from movies to 30 fps video for display (This function is only avail-
able in Component 480i mode.)
CHANNEL
PICTURE
AUDIO
Auto config.
Manual config
Aspect ratio
Cinema
G
CH RTN
ENTER
0
On
Off
4
4
VOL
CH
MUTE
SURF
NR
TIMER
Reset
SAP
PIP
VIDEO
SPECIAL
SCREEN
PIP/DW
LOCK
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
Menu Prev.
1/2/3
2/3
MENU
EXIT
REC
1. Press the MENU button and then use D / E button to select the SCREEN menu.
1/2/3
1
2. Press the G button and then use D / E button to select Cinema.
PLAY
REW
PAUSE STOP
3. Press the G button and then use D / E button to select On or Off.
FF
SKIP
4. Press the ENTER button to save.
• Video, S-Video and Colorstream HD 480i mode only.
P A G E 4 0
Download from Www.Somanuals.com. All Manuals Search And Download.
NR
- You can select 3D NR or MPEG NR to reduce the picture noise which may appear
on the screen while watching the TV.
CHANNEL
PICTURE
AUDIO
Auto config.
Manual config
Aspect ratio
Cinema
G
3D NR
0
0
NR
TIMER
Reset
MPGE NR
CH RTN
ENTER
0
5
5
VOL
CH
MUTE
SURF
SPECIAL
SCREEN
PIP/DW
LOCK
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
Menu Prev.
CC
FREEZE
PIP INPUT
PIC SIZE
1/2/3
2/3/4
1. Press the MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select NR.
4
MENU
EXIT
REC
1/2/3
1
PLAY
REW
PAUSE STOP
FF
3. Press the G button and then use D / E button to select 3D NR or MPEG NR.
4. Press the F / G button to make appropriate adjustments.
SKIP
5. Press the ENTER button to save.
Initializing (Reset to original factory value)
- Reset is unique to each function: Manual config., Position, Split zoom, PIP position
and sub picture size for double window.
- Use the Reset option to initialize the adjusted settings.
CH RTN
ENTER
0
VOL
CH
MUTE
SURF
CHANNEL
PICTURE
AUDIO
Screen adj.
ARC
SAP
PIP
VIDEO
Cinema
YNR
PIPCH- PIPCH+ SWAP
Reset
G
To set
TIMER
CC
FREEZE
PIP INPUT
PIC SIZE
SPECIAL
SCREEN
PIP/DW
LOCK
1/2
2/3
MENU
EXIT
REC
Menu Prev.
1/2
1
PLAY
REW
PAUSE STOP
FF
SKIP
1. Press the MENU button and then use D / E button to select the SCREEN menu.
2. Press the G button and then use D / E button to select Reset.
3. Press the G button.
•You can initialize Position, PIP Transparency, PIP position, PIP size and sub picture
size for double window.
P A G E 4 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Lock Setup
Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting sta-
tion. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the
categories chosen to be blocked. It is also possible to block all program viewing for a time period. To use this function,
the following must be done :
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by
TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the
Movie Rating System (MPAA) only.
Ratings for Movies previously shown in theaters:
Movie Ratings :
• Unblocked (Permits all programs)
• G & above (General audience)
• PG & above (Parental guidance suggested)s
• PG-13 & above (Parents strongly cautioned)
• R & above (Restricted)
• NC-17 & above (No one 17 and under admitted)
• X (Adult only)
If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
Ratings for Television programs including made-for-TV movies :
General TV Ratings:
• Unblocked
• TV-G & above (general audience) (individual categories do not apply)
• TV-PG & aboves (parental guidance suggested)
• TV-14 & above (14 years and older)
• TV-MA (mature audience)
Children TV Ratings:
• Unblocked
• TV-Y & above (youth) (individual content categories do not apply)
• TV-Y7 (youth, 7 years and up)
Content Categories:
• Dialog - sexual dialogue (applies to TV-PG & above, TV-14)
• Language - adult language (applies to TV-PG & above, TV-14 & above, TV-MA)
• Sex scenes - sexual situations (applies to TV-PG & above, TV-14 & above, TV-MA)
• Violence (applies to TV-PG & above, TV-14 & above, TV-MA)
• F Violence - fantasy violence (applies only to TV-Y7)
Aux. Block
• Video 1, 2/ Front Video (Blocked, Unblocked)
• ColorStream HD1, 2 (Blocked, Unblocked)
• RGB, HDMI (Blocked, Unblocked)
For Canadian English/French language rating system:
Canadian English language rating system:
• C & above (Children)
• C8+ (8 years and older)
• G & above (General programming. Suitable for all audiences.)
• PG & above (Parental guidance suggested)
• 14+ (Viewer 14 years and older)
• 18+ (Adult programming)
Canadian French language rating system:
• G & above (General)
• 8 ans+ (8 years and older)
• 13 ans+ (13 years and older)
• 16 ans+ (16 years and older)
• 18 ans+ (Adults only)
P A G E 4 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Lock
- Lets you set up blocking schemes to block specific channels, ratings, and external
viewing sources.
- A password is required to gain access to this menu if the Lock System is turned on
CHANNEL
PICTURE
AUDIO
On
Off
Lock on/off
Set password
MPAA
G
Age block
Content block
Aux. block
Canadian
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Prev.
1. Press the MENU button and then use D / E button to select the LOCK menu.
Then, press the G button
• If Lock is already set, enter the password as requested.
• The TV is set up with the initial password “0-0-0-0”.
2. Use the D / E button to choose from the following LOCK Menu options. Once
the option is selected, change the settings to your preference.
• Lock on/off: Activates or disables the blocking scheme you set up pre-
viously.
• Set Password: Change the password by inputting a new password twice.
• MPAA (Movie Rating): Blocks movies according to the movie ratings
limits specified, so children cannot view certain movies. You can set
the ratings limit by blocking out all the movies with the ratings above
a specified level. Keep in mind that the movie ratings limit only applies
to movies shown on TV, not TV programs, such as soap operas.
• Age block
CH RTN
ENTER
0
3
VOL
CH
MUTE
SURF
Children: Prevents children from watching certain children's TV pro-
grams, according to the ratings limit set. The children rating does not
apply to other TV programs. Unless you block certain TV programs
intended for mature audiences in the TV Rating - sub menu, your chil-
dren can view those programs.
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
General: Based on the ratings, blocks certain TV programs that you
and your family do not want to view.
CC
FREEZE
PIP INPUT
PIC SIZE
• Content block: According to the contents (Dialog, Language, Sex
scenes, Violence, F Violence), you can set the ratings limit.
• Aux. Block: Enables you to select a source to block from the external
source devices you have hooked up.
1/2
1
3
• Canadian
MENU
EXIT
REC
English: To prevent the children from looking at certain tele programs
for the programs intended for the children. This dimension does not
apply to the other tele programs. Unless locking certain programs
intended for the older spectators with the general menu; tele dimen-
sion, the children can look at these emissions.
1
PLAY
REW
PAUSE STOP
1/2
FF
SKIP
French: To lock certain tele programs which one does not want to look
according to the dimensions.
3. Press the ENTER button to save.
Note
• If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’ on the remote control.
- PIP/DW, DW or PIP function doesn’t work if the Key Lock System is turned
on.
P A G E 4 3
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP (Picture-in-Picture) / Twin Picture Operation
PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other
source (PIP) will show a smaller inset image.
Twin Picture splits the screen into 2, allowing 2 pictures to be shown on the TV screen at the same time. Each source is given half
the screen.
Watching PIP
Press the PIP button to show the sub picture.
Each press of PIP changes the PIP options as shown below.
PIP Mode
DW1
DW2
POP Mode
PIP / Twin Picture Source Selection
Changes the picture source for the Sub Picture image so
you can watch your TV, cable TV, VCR, or any other
devices that are connected to your TV.
Using the menu
Press the MENU button on the remote control,
then use the D / E button to select the
PIP/DW menu.
Ant/Cable
Video1
Input
CHANNEL
PICTURE
AUDIO
1
DW
Video2
PIP
Front Video
Colorstream HD1
Colorstream HD2
RGB
PIP Input
Win.size
Win.position
PIP Transparency
Press ENTER or the G arrow button to access
the PIP/DW menu.
TIMER
2
3
4
SPECIAL
SCREEN
PIP/DW
LOCK
HDMI
Use the D / E to select the Input option.
Press ENTER or the G to access the Input
menu, then use the D / E button to select the
source. Your choices are: Ant/Cable, Video 1,
Video 2, Front Video, Colorstream HD1,
Colorstream HD2, RGB, HDMI.
Menu Prev.
Do not display a fixed image on the screen for long
periods of time. Doing so may cause image burn-in.
W
W
Press EXIT to save and return to TV viewing
or press the F to save and return to the pre-
vious Menu.
Not all sources are available for PIP.
5
VOL
CH
MUTE
SAP
SURF
Using the PIP INPUT button on the remote control
VIDEO
Use the PIP INPUT button to select the input source
PIP
PIPCH- PIPCH+ SWAP
1
for the sub picture.
Each time you press PIP INPUT button, you toggle
between Ant/Cable, Video 1, Video 2, Front Video,
Colorstream HD1, Colorstream HD2, RGB, HDMI.
PIP INPUT
FRE
CC
PIC SIZE
P A G E 4 4
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP (Picture-in-Picture) / Twin Picture Operation
Selecting PIP / Twin Picture Channels
Press the PIP button on the remote control to select PIP or Twin picture mode.
Select the Ant/Cable source with the PIP INPUT button.
1
Use the PIPCH-/PIPCH+ button to select a channel for the sub picture.
2
Swapping Pictures
Press the SWAP button.
Each time you press the SWAP button, you switch the Main and Sub pictures.
Main Picture
Sub Picture
Main Picture
Sub Picture
Moving the Sub Picture (PIP mode only)
In the PIP/DW menu, select the Win.position and then each press of the UP/DOWN/LEFT/RIGHT arrow buttons will
move the sub picture to a different position on the screen.
POP (Picture-outside-Picture)
Use POP to search the pictures of all the programmed chan-
nels one-by-one on the 3 POP screen display, while the main
screen remains the current channel.
Press PIP button on the remote control
1
with the POP image on the screen to acti-
vate POP (Picture-outside-Picture) mode.
The pictures of all the programmed chan-
nels are searched with the 3 POP screen, as
shown to the right.
• Press SWAP, to enlarge the selected
channel being searched on the POP
screen to view it on the Main screen.
(It’s possible to use this function in
Ant/Cable input source for Main and Sub
picture.)
Press the EXIT button to exit POP mode.
2
Run Auto Program channel search before using POP mode.
W
P A G E 4 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp Unit Replacement
• To obtain a replacement lamp unit:
• In Canada, contact a Toshiba parts distributor by directing your web browser to www.toshiba.ca Click
"Home Entertainment," and then click "Support."
Use the replacement lamp unit model listed below only. Using any other lamp may cause damage to the TV
and/or lamp. Model name is D85-LMP.
CAUTION: Always replace with same type lamp unit: Model No.
[D85-LMP]
You must replace the lamp when:
• The image gets darker or starts to deteriorate.
• Follow the instructions to replace the lamp, as shown below.
1. Turn off the TV and unplug the power cable.
2. STOP! Allow the lamp to cool for at least one (1) hour before replacing it.
CAUTION: HOT SURFACE!
The temperature of the lamp immediately after use exceeds
392°F (200°C). Touching the lamp before it has cooled
will result in severe burns. ALLOW THE LAMP TO COOL FOR
AT LEAST ONE (1) HOUR BEFORE REPLACING IT.
3. Remove the 2 retaining screws on the lamp cover with a Phillips type screwdriver. Remove the lamp door
completely from the TV.
WARNING: RISK OFF ELECTRIC SHOCK!
The lamp unit door is provided with an interlock to reduce the
risk of electric shock and excessive ultraviolet radiation. Never
defeat its purpose or attempt to service without removing the
lamp unit door completely. Failure to follow this WARNING may result in death or seri-
ous injury.
4. Remove the two retaining screws on the lamp case with using Phillips type screwdriver.
5. Lift up the fixed wire handle of the lamp.
P A G E 4 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp Unit Replacement(Contd.)
6. Pull out the handle slowly and remove the lamp case.
7. Insert the new lamp gently into the correct position. Make sure it is inserted correctly.
Note:
• Never subject the lamp unit to excessive shock.
• Never touch the lamp unit glass or otherwise get it dirty.
Doing so may affect the image quality and reduce the service life of the lamp. See “ Cleaning the
lamp unit glass” at below.
Cleaning the lamp unit glass
If you accidentally touch the lamp unit glass or otherwise get it dirty, wipe it with a lint-free
lens cleaning cloth (such as a cloth for cleaning camera lenses or eyeglasses).
CAUTION: NEVER clean a hot lamp with any type of flammable liquid or
aerosol cleaning agent. Many ordinary cleaning agents (such as glass
cleaners) contain chemicals that may be flammable at certain tempera-
tures. If the lamp unit is not allowed to cool for at least one (1) hour,
such chemicals may lgnite.
8. Using a manual Phillips screwdriver (Do Not use an electric screwdiver), tighten the screws you removed in
step 3.
9. Replace the lamp cover and tighten the cover screws.
NOTE: Make sure the lamp unit and door are installed securely; otherwise, the
TV may not turn on.
10. Plug in the power cord and turn on the TV. After the initial warmup period (which may take up to several
seconds for full picture brightness), the TV should operate normally. If any of the following conditions exist,
turn off the TV, unplug the power cord, and repeat steps 1–9 to ensure that the lamp unit and lamp unit
door are installed correctly:
•
The lamp indicator flashes green.
• No picture
•
•
Dark picture
TV will not turn on
If, after repeating steps 1–10, the problem still exists:
•
In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to
www.toshiba.ca; click "Home Entertainment," and then click "Support."
P A G E 4 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp Unit Replacement(Contd.)
Lamp unit disposal
• Place the used lamp unit in the empty box from the new lamp unit.
• Keep the lamp unit out of reach of children and pets.
CAUTION: Always handle the lamp unit with care.
The lamp unit in this TV was designed for safe replacement by consumers;
however, if the lamp unit is subjected to intentional or accidental abuse
(such as excessive mechanical abuse or handling by children or pets), the
unit may break, exposing sharp edges or pinch points.
• Dispose of the used lamp unit by the approved method for your area.
NOTE: The lamp unit contains mercury, the disposal of which may be regulat-
ed due to environmental considerations. For disposal or recycling information,
contact your local authorities or the Electronics Industries Alliance
(www.eiae. org).
P A G E 4 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the Remote
The remote control for your HD receiver is a
multi-brand or universal remote control that can
be programmed to operate most remote-control-
lable devices of other manufacturers.
Note: The remote control may not be able to con-
trol all models of other brands.
VCR CABLE DVD
TV
SAT
MODE
LIGHT
POWER
Test your remote control.
2
4
3
1
To find out whether your remote control can
operate the device without programming,
turn on the device such as a the VCR and
press the corresponding mode button (VCR)
on the remote control while pointing at the
device. Test the POWER and CH D / E buttons
to see if the device responds properly. If
not, the remote requires programming to
operate the device.
TV/VIDEO
C/S HD1
FRONT
HDMI
RGB
C/S HD2
1
4
2
5
8
0
3
6
9
7
Turn on the device to be programmed. Then
press the corresponding mode button on the
remote control.
CH RTN
2
3
ENTER
VOL
CH
MUTE
SURF
3
SAP
VIDEO
Press the POWER button and the MUTE but-
ton simultaneously. Now the remote control
is ready to program the code for the corre-
sponding device.
4
5
PIP
PIPCH- PIPCH+ SWAP
There are two ways to find the right code for
the device.
CC
FREEZE
PIP INPUT
4
PIC SIZE
A. If you press the CH D / E buttons repeat-
edly, the codes will change one at a time.
Press the POWER button after each code
change. If the right code is found, the
device will turn off.
MENU
EXIT
REC
B. Enter a code number using the number
buttons on the remote. The right code num-
bers for the corresponding component can
be found on the following pages.
Again, if the code is correct, the device will
turn off.
PLAY
REW
PAUSE STOP
FF
SKIP
Press the EXIT button to store the program.
5
6
Test the remote control functions to see if
the device responds properly. If not, repeat
from step 2.
P A G E 4 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Codes: TVs
TVs
Brand
Codes
Brand
Codes
Brand
Codes
Brand
Codes
A MARK
ADMIRAL
AKAI
AMPRO
AMSTRAD
ANAM
112 143
072 081 161
006 146
073 167
052
043 054 056
080 104 108
112 115 118
121 131
004 006 058
112
088
002 003 004
006
058
043
002 003 004
006 043 101
103 143
043
004
039 043 050
051
143
043 054
043 143
004 006 101
116 143
043
004 016 017
043 044 055
071 076 103
107 111 114
117 120 123
125 127 128
136 143
004 116 143
043
062
024 077 143
004 005 006
028 043 047
048 050 051
096 116 143
151 153 154
155
007 057
028 043
043
GOLDSTAR
004 102 106
110 112 113
116 119 122
127 137 143
004 116
004 006 009
010 011 012
023 041 075
143 158 163
166
019 024 040
056 130 132
134
043
043
043
019 081
034 056 080
092 164
003 004 006
024 043 056
059 060 063
064 127 143
164
003 004 005
006 038 059
070 093 143
160 164
006 018 023
025 027 116
135 176
004 143
144 160 161
165 167
Sharp
004 014 019
022 028 029
081 143 170
175
088
072
041 070 079
085 126 139
147 185
003 004 028
043 116
112
NIKEI
ONKING
ONWA
OPTONICA
PANASONIC
HALL MARK
HITACHI
SIEMENS
SIGNATURE
SONY
AOC
PHILCO
SOUNDESIGN
INFINITY
INKEL
JBL
164
129
164
BLAUPUNKT
CANDLE
SPECTRICON
SSS
SUPRE MACY
SYLVANIA
004 043
002
JCPENNY
004 006 008
009 024 030
065 101 143
156 160
013
034 038 070
083 145
043
006 070
002 059
143
006 043 143
154
CAPEHART
CETRONIC
CITIZEN
PHILIPS
PIONEER
003 004 006
044 059 060
063 064 116
127 140 160
164
JENSEN
JVC
CLASSIC
CONCERTO
CONTEC
TANDY
TATUNG
TECHNICS
TECHWOOD
TEKNIKA
081
KEC
056 062
034 080 084
004
002 003 004
006 024 028
031 043 072
077 101 103
143
KENWOOD
KLOSS
KMC
PORTLAND
PROSCAN
CORONADO
CRAIG
CROWN
KTV
PROTON
004 058 116
131 143 171
173
CURTIS MATHES
LG
255
072
072
004
LODGENET
LOGIK
LUXMAN
LXI
QUASAR
RADIO SHACK
034 056 092
019 043 047
116 127 143
004 006 023
024 056 065
074 144 152
156 160 161
165
007 019 043
047
186
168 169
004 006 058
116
004 050 089
101 105 113
116 127 133
137 143 160
007 020 021
033 039 053
057 082 166
004 028 043
048 116 143
004 007 015
028 030 057
082 094 101
116 143 160
CXC
DAEWOO
TELEFUNKEN
037 046 086
087
072
007 015 052
081 160 164
166
003 004 006
022 059 060
061 063 064
127 143 160
164
006 077 164
164
004 007 072
116
RCA
TELERENT
TERA
TMK
172
004 116
007 015 030
040 051 062
101 138
143
008 009
146
174
004 116
004 008 009
019 028 060
061 063 064
072 074 116
143 164
004 006
004 116
043
MAGNAVOX
TOSHIBA
REALISTIC
DAYTRON
DYNASTY
DYNATECH
ELECTROHOME
EMERSON
TOTEVISION
UNIVERSAL
VIDEO CONCEPTS
VIDIKRON
VIDTECH
ROCTEC
RUNCO
SAMPO
MARANTZ
MATSUI
MEMOREX
SAMSUNG
WARDS
METZ
MGA
088
004 006 024
028 042 049
077 116
088
004 006 024
028 040 042
109 116 124
146
004 006 062
101
015 025
006 007 016
SANYO
FISHER
FUNAI
FUTURETECH
GE
MINERVA
MITSUBISHI
YAMAHA
YORK
YUPITERU
ZENITH
SCOTT
SEARS
004 006 008
009 034 056
073 074 091
116 130 144
155 160 161
165
001 072 073
095 103 157
112
MTC
ZONDA
NAD
NEC
P A G E 5 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Codes: VCRs
VCRs
Brand
AIWA
AKAI
Codes
034
Brand
Codes
055 060 130
150 152
014 034 039
043 047 048
255
Brand
Codes
Brands
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
Codes
040 101
040
012
048
034 040 041
062 063 107
109 140 144
145 147
003 008 010
014 031 033
034 040 053
054 101
016 043 046
124 125 146
072
031 033 103
012 023 039
043
035 037 129
028 031 033
108
003 040 135
031 033 041
005 007 010
064 065 108
110 111 112
116 117 119
108
KENWOOD
AMPRO
ANAM
AUDIO DYNAMICS
LG
LLOYD
LXI
REALISTIC
012 034 046
040
034
003 009 013
014 017 034
101 106
003 013 017
024 031 033
034 040 053
054 131
012 034 039
043
001 034 048
056 058 072
080 101
BROKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
RICO
058
148
014
MAGIN
MAGNAVOX
040
RUNCO
SALORA
SAMSUNG
031 033 034
041 067 068
012 031 033
067 069
101
027 030
YAMAHA
ZENITH
032 040 102
104 105 107
109 112 113
115 120 122
125
022 043 048
135
003 007 010
014 102 134
017 037 112
129 131
003 008 009
010 013 014
017 020 031
042 073 081
101
MARANTZ
MARTA
MATSUI
MEI
DAYTRON
DBX
031 033
SANSUI
SANYO
SCOTT
012 023 039
043
034 053
MEMOREX
003 010 014
031 033 034
053 072 101
102 134 139
045 046 059
013 020
013 020 045
046 049 051
059 061 151
034 040
DYNATECH
ELECTROHOME
EMERSON
059
006 017 025
027 029 031
034 035 036
037 046 101
129 131 138
153
MGA
MINOLTA
MITSUBISHI
SEARS
MTC
FISHER
003 008 009
010
034
031 033 063
072 107 109
144 147
MULTITECH
NEC
024 034
012 023 039
043 048
043
053 054
066 070 074
083 133 140
145
013 020 031
033 063
SHARP
SHINTOM
SONY
031 054 149
024
003 009 031
052 056 057
058 076 077
078 149
034
013
031 033 034
059 067
FUNAI
GE
NORDMENDE
OPTONICA
PANASONIC
GO VIDEO
GOLDSTAR
132 136
SOUNDESIGN
STS
SYLVANIA
012 013 020
101 106 114
123
PENTAX
HARMAN KARDON
HITACHI
012 045
PHILCO
PHILIPS
031 034 067
031 033 034
054 067 071
101
101
013 021 048
108
072
011 014
033 066 075
145
013 020 033
SYMPHONIC
TANDY
TATUNG
TEAC
TECHNICS
TEKNIKA
034
010 034
039 043
034 039 043
031 033 070
019 031 033
034 101
034
006
004 018 026
034 043 063
137 150
031 033
031 033
012 013 015
033 040 066
101
043
012 031 033
043 048 050
INSTANTREPLAY
JCL
JCPENNY
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
THOMAS
TMK
TOSHIBA
JENSEN
JVC
008 013 042
047 059 082
112 131
RCA
P A G E 5 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Codes: SAT/DVDs
SAT
Brand
ALPHASTAR DSR
AMPLICA
BIRDVIEW
BSR
CAPETRONICS
CHANNEL MASTER
Codes
123
050
051 126 129
053
Brand
Codes
027 133 134
Brand
Codes
117
071
Brand
Codes
115
128 146
001 081 082
083 084 091
120
PERSONAL CABLE
PHILIPS
PICO
PRESIDENT
PRIMESTAR
PROSAT
RCA
REALISTIC
SAMSUNG
VIEWSTAR
WINEGARD
ZENITH
GENERAL INSTRUMENT 003 004 016
029 031 059
101
139 140
033 037 039
051 057 104
068
105
019 102
030 110 111
072
066 106
043 074
123
053
HITACHI
HOUSTON TRACKER
013 014 015
018 036 055
008 009 012
077
CHAPARRAL
HUGHES
HYTEK
053
CITOH
CURTIS MATHES
DRAKE
054
JANIEL
JERROLD
KATHREIN
LEGEND
LG
LUTRON
LUXOR
MACOM
060 147
061
108
057
255
SATELLITE SERVICE CO 028 035 047
057 085
SCIENTIFIC ATLANTA 032 138
050 145
005 006 007
010 011 052
112 116 141
024 046 056
076
038 040 057
058 093 094
095 096 097
098 099 100
122
SONY
103
STARCAST
SUPER GUIDE
TEECOM
041
DX ANTENNA
ECHOSTAR
132
020 124 125
023 026 075
087 088 090
107 130 137
002 127
016 025 042
043 044 045
048 049 078
079 080 086
101 135 136
062 144
010 059 063
064 065
057
028 124 125
069 070
MEMOREX
NEXTWAVE
NORSAT
PACE SKY SATELLITE 143
PANASONIC
PANSAT
TOSHIBA
UNIDEN
ELECTRO HOME
EUROPLUS
FUJITSU
089
114
017 021 022
060 142
121
DVD
Brand
APEX DIGITAL
DENON
GE
GOLDSTAR
HARMAN KARDON
JVC
LG
Codes
022
020 014
005 006
010 016 025
027
Brand
Codes
025
013
024
002
023
008 017
003 009
Brand
Codes
013
004 026
021
005 006
005 006
011 015
007
Brand
Codes
PHILIPS
PIONEER
PROCEED
PROSCAN
RCA
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005 006
019 008
009 018
010 016 025
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
ONKYO
PANASONIC
012
001 010 016
SAMSUNG
SONY
P A G E 5 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Codes: Cable Boxes
CATV
Brand
ABC
Codes
Brand
Codes
Brand
REGAL
REGENCY
REMBRANT
RK
Codes
049 050
057
025
091
Brand
Codes
032 035
012 015 018
086 087 088
089
003 004 039
042 046 052
053
014
005 007 014
024
026
092
007
007
065 090
080 081
019 030
023
020 030 040
057 062 066
032
072
008 022 025
054
052 074
030
049 050 055
052 055
070 077
002 003 004
008 009 010
052 069 074
255
037
033
010 012 064
079
001
028 032
015 028 038
071 073
016 031 037
053
044 047
001
006 012 013
020 065 085
090
034 051 052
063 076
016
VIEWSTAR
LG
ANTRONIK
ARCHER
M-NET
MACOM
MAGNAVOX
SAMSUNG
SCIENTIFIC ATLANTA 003 011 041
030 068
ZENITH
001 060 093
CABLE STAR
CENTURION
CENTURY
CITIZEN
COLOUR VOICE
COMBANO
COMTRONICS
DIAMOND
EAGLE
042 043 045
046
022
030
052
MEMOREX
MOVIE TIME
NSC
SHERITECH
SIGNAL
SIGNATURE
SL MARX
SPRUCER
STARCOM
OAK
030
047 078
002 004 008
009
008 030
067
PANASONIC
PARAGON
PHILIPS
EASTERN
ELECTRICORD
GE
STARGATE
SYLVANIA
TADIRAN
TANDY
TEXSCAN
TOCOM
TOSHIBA
UNIKA
UNITED CABLE
UNIVERSAL
030
017
GEMINI
PIONEER
029 067
039 040 056
001
007 014 024
004 053
005 007 014
024 026 027
GI
POST NEWS WEEK
PRUCER
PTS
GOLDEN CHANNEL
HAMLIN
HITACHI
HOSPITALITY
JERROLD
059
011 048 071
072 073 074
001
PULSAR
RCA
047
P A G E 5 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Some quick and easy tips to fixing problems yourself.
POSSIBLE SOLUTIONS
SYMPTOMS
• Check your antenna connection or location.
• Check your cable input.
Snowy picture and unclear sound.
• Check to see if the TV/VCR button on your VCR has the TV selected.
• Check your antenna direction and/or location.
• Check your cable input.
Multiple images or ‘ghost shadows.’
• Make sure the cable from your antenna to your TV is
properly connected.
The following may cause image problems or distortion:
Electrical appliances, powerful lights, cars, trucks; computers or
portable phones; medical equipment
Interference: Sharp lines across
the screen and unclear sound.
• If possible increase the distance between your TV and the offending appliance.
Or shut one of them off.
• Check sound level.
• Make sure the TV sound is not muted.
Normal picture but no sound.
• Try another channel. The problem may be the broadcast, not your TV.
• Are the Audio cables properly installed?
• Are the wires for external speakers (if you have external speakers)
properly installed?
• Make sure your speakers are turned on in the Audio menu.
• If your audio mode is set to SAP, that channel may not have a SAP program.
• Are you in TV or cable tuning mode, and should be in the other?
• Make sure output channels on all A/V equipment are on the same channel (3 or 4).
• Check that all connections are tight.
No picture and unclear sound.
No picture and no sound.
• Is the AC power cord plugged in?
• Check that your AC power outlet works. (Test it by plugging in something
else or try another outlet.)
• Make sure your brightness and audio controls are set properly.
• Try another channel. The problem may be with the broadcast.
• Check the color settings in the Video menu.
• Try another channel. The problem may be with the broadcast.
No color, but the sound is O.K.
• The Caption option may be in Text mode. Select CC 1 in the Caption/Text menu
or Off in the Caption menu.
Picture has a big black box
on it, but the sound is O.K.
• Your program is in letterbox. This means that the shape of your TV is a
square, but the program is a rectangle. Think of the bars as empty space the
program doesn’t fill; not picture that’s blocked out. Because this format is a
direct representation of film as you see it in the movies, you are actually seeing
MORE of the program when you see those bars.
Picture has two horizontal
black bars, one on top and
one on bottom.
Missing Secret code
• If you forget the secret code, press the remote control Button ‘7’, ‘7’, ‘7’ and ‘7’
when the display asks you to enter the secret code.
P A G E 5 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Contd.)
Remote control doesn’t work.
• Make sure the batteries are fresh and installed properly.
Menu options can’t be
• Try unplugging your TV for a few minutes,
changed or selected.
then plug it back in.
No picture or sound
when any non-cable source
is selected.
• Check to see if the source equipment has been turned on.
• Make sure that the connections are secure on the back of your TV and on the
source equipment.
Weak or no Stereo Sound
when using a stereo VCR.
• Check to see if all the connections are secure.
• Look in the Audio mode menu to see if all the settings are correct.
• You are using channel 3 or 4 to view your VCR. No stereo sound is present
under that decision.
The PIP inset is black or
lacks contrast.
• Check to be sure that the PIP source is turned on.
• You might want to adjust the PIP picture settings under the PIP menu.
• Check that all the wires are connected properly.
• Check to see if your input source for PIP is set correctly.
The PIP inset is “snow” when
• Look to see if the TV/VCR button on your VCR has the TV selected or change
the source is Antenna.
the PIP to another source.
Time is incorrect.
• Reset clock manually.
• Even though you may be getting cable service, the signal may be weak, which
means the quality of your picture may suffer due to other factors. If there are
problems with the image on your TV, consult the Troubleshooting guide on the
following pages. You may also want to contact your cable service provider to
determine if the problem is from the cable service.
Picture Interference
P A G E 5 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Specifications
• This model complies with the specifications listed below.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be
added in the future.
Model
44HM85
Horizontal Size (Inches)
Height (Inches)
Depth (Inches)
40
29.2
14.4
50.7
Weight (lbs.)
Power Requirement
Television System
Television Channels
AC 120V, 60Hz
American TV Standard, NTSC, ATSC with STB
VHF: 2 - 13
UHF: 14 - 69
CATV: 1 - 125
Power Consumption (W)
Antenna
230W
75 ohm External Terminal for VHF/UHF
15W x 2
Audio Output (W)
External Input/Output Ports
A/V input (3 set)
Monitor out (1 set)
S-Video input (3)
COLORSTREAM HD input (2 set)
RGB input (1)
HDMI input (1)
RGB audio input (1 set)
UPGRADE port (1)
RF input (1)
P A G E 5 6
Download from Www.Somanuals.com. All Manuals Search And Download.
562C_p.57~58(4)_en 90/6/18 1:16 PM Page 1
Limited United States Warranty
for DLP Television Models
TM
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this DLP television must be performed
by an Authorized TACP Service Station.
following limited warranties to original consumers in the United
States.
(3) These warranties from TACP are effective only if the DLP
television is purchased and operated in the U.S.A. or Puerto
Rico.
(4) Labor charges for installation, setup, adjustment of customer
controls, and installation or repair of antenna systems are not
covered by these warranties. Reception problems caused by
inadequate antenna systems are your responsibility.
(5) Warranties extend only to defects in materials or workmanship
as limited above, and do not extend to any DLP television or
parts that have been lost or discarded by you or to damage to
the DLP television or parts caused by fires, misuse, accident,
Acts of God (such as lightning or fluctuations in electric
power), improper installation, improper maintenance, or use in
violation of instructions furnished by TACP; use or malfunction
through simultaneous use of this product and connected
equipment; or to units that have been modified or had the
serial number removed, altered, defaced, or rendered illegible.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS DLP TELEVISION AS A
GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE
NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE
NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor*
TACP warrants this DLP television and its parts against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TACP WILL,
AT TACP’S OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A
NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS
OR LABOR. TACP Authorized Service Station personnel will come to
your home when warranty service is required. Depending on the
type of repair required, either the service will be performed in your
home or the set will be taken to the TACP Authorized Service
Station for repair and returned to your home at no cost to you.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that service is
needed:
(1) To find the nearest TACP Authorized Service Station, visit TACP’s
web site at www.tacp.toshiba.com/service or call toll free 1-
800-631-3811.
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Station.
Limited One (1) Year Warranty on Lamp Unit*
TACP warrants the lamp unit in this DLP television against defects
in materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TACP WILL,
AT TACP’S OPTION, EXCHANGE A DEFECTIVE LAMP UNIT WITH A NEW
OR REFURBISHED LAMP UNIT WITHOUT CHARGE TO YOU. LABOR
CHARGES FOR LAMP UNIT REPLACEMENT ARE NOT COVERED UNDER
WARRANTY. The lamp unit is a user-replaceable component.
For additional information, visit TACP’s web site:
www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A.,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO
THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE.
WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF
ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE FOREGOING
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
GUARANTEES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TACP
WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN
NO EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST
PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE
OF RECORDED DATA CAUSED BY USE, MISUSE, OR INABILITY TO USE
THIS PRODUCT).
Rental Units
The warranty for rental units, including the lamp units contained
therein, begins with the date of first rental or thirty (30) days from
the date of shipment to the rental firm, whichever comes first.
*Limited Warranty for Commercial Units
TACP warrants DLP televisions, including the lamp units contained
therein, sold and used for commercial purposes as follows: all parts
are warranted against defects in materials or workmanship for a
period of ninety (90) days after the date of original purchase.
DURING THIS PERIOD, TACP WILL, AT TACP’S OPTION, REPAIR OR
REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU.
No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which action must be
commenced to enforce any obligation of TACP arising under this
warranty or under any law of the United States or of any state
thereof is hereby limited to 90 days from the date you discover, or
should have discovered, the defect. This limitation does not apply
to implied warranties arising under the law of any state of the
U.S.A.
Owner’s Manual and Product Registration
Read this owner’s manual thoroughly before operating this DLP TV.
Complete and mail the enclosed product registration card or
register your product on-line at www.tacp.toshiba.com/service as
soon as possible. By registering your product you will enable TACP
to bring you new products specifically designed to meet your needs
and help us to contact you in the unlikely event a safety
notification is required under the Consumer Product safety Act.
Failure to complete and return the product registration card does
not diminish your warranty rights.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH MAY VARY FROM STATE TO STATE
IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW
LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY,
LIMITATIONS ON THE TIME WITHIN WHICH AN ACTION MAY BE
BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
Download from Www.Somanuals.com. All Manuals Search And Download.
562C_p.57~58(4)_en 90/6/18 1:16 PM Page 2
Limited Canada Warranty
for DLP Television Models
TM
Toshiba of Canada Limited (“TCL”) makes the following limited
warranties to original consumers in Canada.
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this DLP television must be performed
by an Authorized TCL Service Depot.
(3) These warranties from TCL are effective only if the DLP
television is purchased in Canada from an authorized TCL dealer
and operated in Canada.
(4) Labor charges for installation, setup, adjustment of customer
controls, and installation or repair of antenna systems are not
covered by these warranties. Reception problems caused by
inadequate antenna systems are your responsibility.
(5) Warranties extend only to defects in materials or workmanship
as limited above, and do not extend to any DLP television or
parts that have been lost or discarded by you or to damage to
the television or parts caused by fires, misuse, accident, Acts
of God (such as lightning or fluctuations in electric power),
improper installation, improper maintenance, or use in
violation of instructions furnished by TCL; use or malfunction
through simultaneous use of this product and connected
equipment; or to units that have been modified or had the
serial number removed, altered, defaced, or rendered illegible.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS DLP TELEVISION AS A
GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER
PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN CANADA ARE
NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE U.S.A. ARE
NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor*
TCL warrants this DLP television television and its parts against
defects in materials or workmanship for a period of one (1) year
after the date of original retail purchase. DURING THIS PERIOD, TCL
WILL, AT TCL’S OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH
A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS
OR LABOR. TCL Authorized Service Depot personnel will come to
your home when warranty service is required. Depending on the
type of repair required, either the service will be performed in your
home or the set will be taken to the TCL Authorized Service Depot
for repair and returned to your home at no cost to you. IN-HOME
SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF AN AUTHORIZED
TCL SERVICE DEPOT.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that service is
needed:
(1) To find the nearest TCL Authorized Service Depot, visit TCL’s
web site at www.toshiba.ca.
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Depot.
Limited One (1) Year Warranty on Lamp Unit*
TCL warrants the lamp unit in this DLP television against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TCL WILL, AT
TCL’S OPTION, EXCHANGE A DEFECTIVE LAMP UNIT WITH A NEW OR
REFURBISHED LAMP UNIT WITHOUT CHARGE TO YOU. LABOR
CHARGES FOR LAMP UNIT REPLACEMENT ARE NOT COVERED UNDER
WARRANTY. The lamp unit is a user-replaceable component.
For additional information, visit TCL’s web site:
www.toshiba.ca
ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE OF
CANADA, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES
SET FORTH ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES
IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA AS HEREBY
LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND SIMILAR
OBLIGATIONS OF TCL WITH RESPECT TO THE REPAIR OR
REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TCL BE LIABLE
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, LOST PROFITS,
Rental Units
The warranty for rental units, including the lamp units contained
therein, begins with the date of first rental or thirty (30) days from
the date of shipment to the rental firm, whichever comes first.
*Limited Warranty for Commercial Units
TCL warrants DLP televisions, including the lamp units contained
therein, sold and used for commercial purposes as follows: all parts
are warranted against defects in materials or workmanship for a
period of ninety (90) days after the date of original purchase.
DURING THIS PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR
REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU. ON-SITE SERVICE ONLY APPLIES WITHIN
100 KILOMETERS OF AN AUTHORIZED TCL SERVICE DEPOT.
BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF
RECORDED DATA CAUSED BY USE, MISUSE, OR INABILITY TO USE
THIS PRODUCT).
No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which action must be
commenced to enforce any obligation of TCL arising under this
warranty or under any law of Canada or of any province thereof is
hereby limited to 90 days from the date you discover, or should
have discovered, the defect. This limitation does not apply to
implied warranties arising under the law of any province of Canada.
Owner’s Manual and Product Registration
Read this owner’s manual thoroughly before operating this DLP
television.
Register your product online at www.toshiba.ca as soon as
possible. By registering your product you will enable TCL to provide
you with better customer service and improved product support.
Failure to register your product does not diminish your rights under
this warranty.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH MAY VARY FROM PROVINCE TO
PROVINCE IN CANADA. SOME PROVINCES OF CANADA DO NOT ALLOW
LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY,
LIMITATIONS ON THE TIME WITHIN WHICH AN ACTION MAY BE
BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Download from Www.Somanuals.com. All Manuals Search And Download.
HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA – TEL: (905) 470-5400
SERVICE CENTERS:
TORONTO:
MONTREAL:
VANCOUVER:
191 McNABB STREET, MARKHAM, ONTARIO L3R 8H2, CANADA – TEL: (905) 470-5400
18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J 4A1, CANADA – TEL: (514) 390-7766
22171 FRASERWOOD WAY, RICHMOND, B.C., V6W 1J5, CANADA – TEL: (604) 303-2500
ColorStream, StableSound, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C.
The DLP logo and DLP medallion are trademarks of Texas Instruments.
Dolby is a registered trademark of Dolby Laboratories.
PRINTED IN MEXICO
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide d’utilisation
mc
Téléprojecteur DLP
Dossier du propriétaire
Les numéros de modèle et de série sont inscrits à l’arrière
du téléviseur. Veuillez inscrire ces numéros dans l’espace
réservé à cette fin ci-dessous. Référez à ces numéros
chaque fois que vous communiquez avec votre
concessionnaire Toshiba au sujet de ce téléviseur.
Numéro de modéle:
Numéro de série :
44HM85
5
Tous droits réservés
Download from Www.Somanuals.com. All Manuals Search And Download.
562C-2~5(2)_fr 90/6/18 12:26 PM Page 2
À l’attention du client ,
Merci d’avoir acheté ce téléviseur Toshiba. Ce guide a pour
but de vous aider à utiliser les nombreuses fonctions
emballantes que vous procure ce nouveau téléviseur. Avant
de le mettre sous tension, veuillez lire entièrement ce guide
et le ranger à portée de la main aux fins de consultation
ultérieure.
Protégez vos
enfants
Félicitations pour votre achat! Pour mieux jouir de
votre nouveau téléviseur, n'oubliez pas les conseils
de sécurité suivants :
L’emplacement du
Mesures de sécurité
téléviseur est important
AVERTISSEMENT
POUR RÉDUIRE LES RISQUES D’INCENDIES OU DE CHOCS
ÉLECTRIQUES, NE PAS EXPOSER CET APPAREIL À LA PLUIE
NI À L’HUMIDITÉ.
La question
W
Comme la plupart des consommateurs, vous possédez sans
doute un téléviseur. En fait, plusieurs foyers en possèdent plus
d’un.
W
AVERTISSEMENT : POUR ÉVITER LES RISQUES DE CHOCS
ÉLECTRIQUES, NE PAS ENLEVER LE BOÎTIER (NI LA PARTIE
ARRIÈRE). AUCUNE PIÈCE FONCTIONNELLE À L’INTÉRIEUR.
ADRESSER TOUTE DEMANDE DE SERVICE À DU PERSONNEL DE
SERVICE QUALIFIÉ.
L’expérience du cinéma maison est de plus en plus en vogue et
il se vend actuellement un nombre grandissant de téléviseurs de
plus grands formats. Malheureusement, ces téléviseurs ne sont pas
toujours installés sur des meubles adaptés.
W
Il arrive parfois que les téléviseurs soient mal fixés ou qu’ils
Le symbole de l’éclair dans un triangle vous indique
que la tension à l’intérieur de ce produit peut être
assez forte pour provoquer un choc électrique. NE
TENTEZ PAS DE LE RÉPARER VOUS-MÊME.
soient placés sur une commode, dans une bibliothèque, sur une
étagère, sur un bureau, sur des haut-parleurs, sur un coffre ou un
chariot, pouvant en occasionner la chute et causer des
blessures.
Le point d’exclamation dans le triangle signale la
présence d’importantes directives d’exploitation et
d’entretien
TOSHIBA S'EN PRÉOCCUPE!
W
L’industrie de l’électronique grand public
s’est engagée à faire en sorte que les
consommateurs puissent jouir de leurs
systèmes de divertissements au foyer
de façon sécuritaire.
AVIS AUX INSTALLATEURS DU CABLE
Veuillez rappeler à l’installateur de systèmes de
câblodistribution l’article 820-40 du CNE, lequel présente des
directives sur la bonne mise à la terre et préconise en
particulier que la mise à la terre du câble doit être reliée au
système de mise à la terre du bâtiment, le plus près possible du
point d’entrée du câble. Pour de l’information supplémentaire
sur la mise à la terre de l’antenne, consultez les articles 27 et
28 de la page 4.
W
Avec la participation de fabricants
de meubles pour téléviseurs et de
produits électroniques grand public,
la Consumer Electronics Association
a fondé la Home Entertainment
Support Safety Committee (comité
de soutien de la sécurité des produits
de divertissement au foyer) afin de
promouvoir la sécurité des enfants et
d’éduquer les consommateurs et leurs
familles sur la sécurité en matière de
REMPLACEMENT DU MODULE D'AMPOULE
ATTENTION : SURFACE BRÛLANTE!
La température de cette lampe
après usage dépasse les 392 °F
téléviseurs.
(200 °C). Pour éviter toute
brûlure grave, ne pas la toucher
avant qu’elle ne se soit
Être à l’écoute de la sécurité
Les meubles tout usage NE suffisent PAS! Il faut
W
des meubles assez grands pour soutenir le poids du téléviseur
refroidie. LAISSEZ REFROIDIR L'AMPOULE PENDANT AU MOINS
UNE (1) HEURE AVANT DE LA REMPLACER.
(et de tout autre composant électronique).
W
Utilisez les bons aisseliers, dispositifs d’ancrage et les courroies
L'ampoule de ce produit est d’une durée utile limitée, laquelle
varie en fonction de l’utilisation du produit et des paramètres de
l’utilisateur. Si vous l’utilisez au-delà de sa durée de service, il
se peut que :
appropriées pour fixer vos meubles au mur (sans toutefois visser
quoi que ce soit directement dans le téléviseur).
W
Lisez attentivement toutes les directives ci-jointes sur la bonne
utilisation de ce produit et assurez-vous de bien les comprendre.
• la couleur et la luminance de l’image en soient réduites. Il
W
Lisez attentivement toutes les directives ci-jointes sur la bonne
faudra alors remplacer l'ampoule;
utilisation de ce produit et assurez-vous de bien les comprendre.
• le verre quartzeux de l'ampoule perde de la puissance,
pouvant en occasionner la rupture. Si l'ampoule se rompt, le
téléviseur ne fonctionnera pas jusqu’au remplacement de celle-
ci.
W
Lisez attentivement toutes les directives ci-jointes sur la bonne
utilisation de ce produit et assurez-vous de bien les comprendre.
W
Souvenez-vous que les enfants s’excitent en regardant la
télévision et qu’ils peuvent pousser ou tirer sur le téléviseur et le
Remarque : Cette ampoule est conçue de manière à ce que
le verre qui la compose demeure renfermé à l’intérieur en
cas de bris.
renverser.
W
Partagez les messages de sécurité traitant des dangers cachés
au foyer avec vos amis et les membres de votre famille. Merci!
Voir l’annexe, pages 46 à 48.
•Jetez l'ampoule selon la méthode prescrite dans votre région.
REMARQUE : Cette ampoule contient du mercure.
2500 Wilson Blvd.
Pour des raisons de respect de l’environnement,
Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690
www.CE.org
l’élimination du mercure pourrait être soumise à certains
règlements. Disposez de toutes ampoules usées selon la
méthode approuvée dans votre région. Pour obtenir de
l’information sur l’élimination ou le recyclage du mercure, veuillez
consulter les autorités de votre localité ou la Electronics
Industries Alliance (www.eiae.org).
CEA is the Sponsor, Producer and
®
Manager of the International CES
P A G E 2
Download from Www.Somanuals.com. All Manuals Search And Download.
562C-2~5(2)_fr 90/6/18 12:26 PM Page 3
Consignes de sécurité importantes
Installation, entretien et service
Installation
Au moment d’installer le téléviseur, veuillez suivre les
recommandations, adopter les mesures préventives et tenir
compte des avertissements ci-après :
1) Veuillez lire ces consignes.
2) Veuillez les conserver.
3) Tenez compte de tous les avertissements.
4) Suivez toutes les directives.
5) N’utilisez pas cet appareil près de l’eau.
6) Ne le nettoyez qu’avec un chiffon sec.
17) Ne modifiez jamais cet équipement. Conformément aux
règlements de la Commission fédérale des communications,
tous changements ou toutes modifications à cet appareil
peuvent engendrer a) l’annulation de la garantie et b)
l’autorisation dont jouit l’utilisateur d’exploiter cet équipement.
7) Ne bloquez pas les bouches d’aération. Installer cet
appareil en suivant les directives du fabricant.
8) N’installez pas cet appareil près des sources de chaleur
radiateurs, bouches à air chaud, cuisinières ou autres
appareils émettant de la chaleur (y compris les
amplificateurs).
18)
DANGER : RISQUES DE BLESSURES GRAVES, DE
MORT OU DE DOMMAGES À L’ÉQUIPEMENT! Ne
jamais
9) N’allez pas à l’encontre des mesures de sécurité des
fiches polarisées ou de type mise à la terre. Une fiche
polarisée est dotée de deux lames, dont une est plus large
poser le téléviseur sur un chariot, un
meuble ou une table instable, car
celui-ci pourrait tomber et engendrer
des blessures graves, voire même
la mort, et endommager le téléviseur.
Prise large
que l’autre. Une fiche de type mise à la
terre est dotée de deux lames et d’un
contact de mise à la terre. La lame la
plus large ou le contact de mise à la
terre sont là pour vous protéger.
Si la fiche fournie n’entre pas dans la prise de courant,
demandez à un électricien de remplacer la prise de courant
désuète.
19) Ne placez ni n’entreposez jamais le téléviseur directement
au soleil, dans des endroits chauds, humides ou exposés à
la poussière excessive, aux vibrations ou à des températures
inférieures à 5 °C (41 °F).
10) Protégez le cordon d’alimentation faites en
sorte qu’on ne puisse marcher dessus et
ne le pincez pas, surtout près de la fiche,
de la prise de courant et du point d’où il
sort de l’appareil.
20) Placez toujours le téléviseur sur un plancher ou une surface
solide, unie et stable, pouvant en soutenir le poids.
21) N’exposez jamais le téléviseur à des objets pouvant couler
ou éclabousser. N’y déposez ni vases, ni aquarium, ni
chandelles ou autres articles remplis de liquide.
11) N’utilisez que les accessoires précisés par le fabricant.
12) Utilisez uniquement le chariot,
22) Pour assurer une aération adéquate, placez toujours le
téléviseur à une distance d’au moins un (1) pouce de toute
surface verticale (un mur, par ex.).
le meuble, le trépied, le support ou la table
précisés par le fabricant ou vendus avec
l’appareil. Si vous devez déplacer l’appareil
à même le chariot, attention aux blessures
pouvant résulter de la chute de l’appareil.
23) Ne bloquez jamais les fentes et les orifices du boîtier
arrière, inférieur ou latéral du téléviseur et ne les recouvrez
pas. Ne le posez jamais
13) Débranchez cet appareil pendant les orages ou si vous
ne comptez pas l’utiliser pendant de longues périodes.
14) Confiez toutes réparations à du personnel qualifié. Il
faut faire appel à un technicien dans les cas suivants :
dommages au cordon d’alimentation ou à la fiche;
écoulement de liquide ou chute d’un objet dans l’appareil;
exposition de l’appareil à la pluie ou à l’humidité
•sur un lit, un divan, un tapis ou quelque autre surface du genre;
•trop près des tentures, des rideaux ou des murs;
•dans des espaces restreints tels qu’une bibliothèque, une
armoire encastrée et tout autre endroit mal aéré.
engendrant la moisissure; lorsque l’appareil ne fonctionne
pas normalement ou qu’il a été échappé. Cette consigne
s’applique à tous les articles, à l’exception de ceux qui
sont précisés aux pages 46 à 48 de ce guide.
Les fentes et orifices du téléviseur servent à le protéger contre
les excès de chaleur et à en assurer l’exploitation fiable.
24) Ne laissez jamais reposer ni rouler d’objets sur le cordon
d’alimentation. Ne posez jamais le téléviseur à un endroit
où le cordon d’alimentation risque de s’user ou d’être utilisé
de manière abusive.
15) ATTENTION : Pour éviter les risques de chocs électriques,
n’utilisez jamais la prise polarisée avec un cordon prolongateur,
une prise de courant ou quelque autre prise du genre à moins
que les lames puissent y être entièrement enfouies.
16) ATTENTION : Ce produit contient une ampoule servant à
projeter l’image et fait l’objet de mesures de sécurité
particulières :
25) Ne surchargez jamais les prises de courant murales ni les
cordons prolongateurs.
• Consultez les pages 46 à 48 pour les directives de
remplacement de l'ampoule.
26) Exploitez toujours cet équipement à partir d’une source
d’alimentation de 120VAC, 60 Hz.
• NE tentez PAS de réparer ce produit sauf de la manière
précisée dans les pages 46 à 48. Le seul produit pouvant
être échangé dans cet appareil est l'ampoule.
(Suite à la page suivante)
P A G E 3
Download from Www.Somanuals.com. All Manuals Search And Download.
562C-2~5(2)_fr 90/6/18 12:26 PM Page 4
Entretien (Suite de la page colonne)
Installation (Suite de la page précédente)
33) Pour protéger davantage le téléviseur contre la foudre et les
surtensions, débranchez toujours le cordon d’alimentation et
l’antenne du téléviseur lorsque celui-ci n’est pas utilisé ou si
vous vous comptez vous absenter pendant un certain temps.
27) Assurez-vous toujours que l’antenne soit correctement mise
à la terre afin de protéger celle-ci adéquatement contre les
surtensions et les accumulations de charges électrostatiques
(voir l’article 810 du NEC).
34)En cours d’usage normal, le téléviseur peut émettre des bruits
secs ou des claquements. Ceci est normal surtout lorsqu’on
allume ou qu’on éteint l’unité. Si ces bruits persistent ou se
produisent trop souvent, débranchez le cordon d’alimentation
et communiquez avec un Centre de service autorisé Toshiba.
Entrée de courant de
l’antenne
Unité de décharge de
l’antenne (Article 810 du
NEC)
35) Entretien particulier des unités DLPMC (Digital Light
Prise de terre
Processing ou bloque optique numérique:
Conducteur de terre
(Article 810 du NEC)
•
L'ampoule—la durée utile de l'ampoule que contient ce
produit est limitée. Cette durée varie selon l’utilisation ou
les réglages mis en place par l’utilisateur du produit. Si
vous utilisez l'ampoule au-delà de sa durée utile :
Matériel de service électrique
Système de prise de terre du
service d’alimentation
(Article 810 du NEC)
- vous remarquerez une diminution des couleurs et / ou de
la luminance et il vous faudra alors remplacer l'ampoule;
Prise de terre
- la puissance du verre quartzeux de l'ampoule sera réduite
et l'ampoule pourra alors se rompre. Dans le cas là, le
téléviseur ne fonctionnera pas jusqu’à ce que l'ampoule
soit remplacée.
28)
DANGER : RISQUES DE BLESSURES GRAVES OU DE
MORT!
• Prenez les précautions nécessaires pour éviter que
vous et tout objet que vous touchiez (tels une échelle ou un
tournevis) n’entre en contact par mégarde avec les circuits
électriques aériens ou tous autres circuits électriques.
•Ne tentez jamais de raccorder les objets suivants pendant
un orage :
a) un système d’antenne ou b) des câbles, des fils ou
quelque composante du cinéma maison que ce soit à une
antenne ou un système téléphonique.
Consultez les pages 46 à 48
.
Remarque :
• Cette ampoule est conçue de manière à ce que le verre brisé
demeure à l’intérieur de celle-ci.
•Cette ampoule contient du mercure. Pour des
raisons de respect de l’environnement,
l’élimination du mercure pourrait être soumise à
certains règlements. Disposez de toutes
ampoules usées selon la méthode approuvée dans votre
région. Pour obtenir de l’information sur l’élimination ou le
recyclage du mercure, veuillez consulter les autorités de votre
localité ou la Electronics Industries Alliance (www.eiae.org).
Entretien
• Disposez de toutes ampoules usées selon la méthode
prescrite dans votre région.
Pour obtenir un meilleur rendement du téléviseur TOSHIBA et
pour une exploitation plus sécuritaire, veuillez suivre les
directives et prendre les précautions suivantes :
Service
29) Asseyez-vous toujours à environ 10 à 25 pieds de distance du
téléviseur et, autant que possible, en ligne droite. Si vous
êtes assis trop loin vers la droite ou la gauche du téléviseur,
ou si la lumière du soleil ou d’ampoules électriques est
projetée à l’écran, l’image semblera faible. Pour vérifier s’il y
a des reflets à l’écran du téléviseur, éteignez-le. Enlevez
ensuite la source du reflet pour regarder la télévision.
36
)
AVERTISSEMENT : RISQUES DE
CHOCS ÉLECTRIQUES!
Ne tentez jamais de réparer vous-
même le téléviseur sauf de la manière
prescrite aux pages 46 à 48. En ouvrant ou en enlevant le
boîtier, vous vous exposez à de la haute tension et à d’autres
dangers. Tout défaut de suivre cet AVERTISSEMENT peut
engendrer de graves blessures, voire même la mort! Confiez
toutes les réparations non mentionnées dans ce guide à un
Centre de service autorisé Toshiba.
30) Débranchez toujours le téléviseur avant de le nettoyer.
N’utilisez jamais de liquides ni de nettoyants en aérosol.
Nettoyez-le uniquement avec un chiffon sec. Ne vaporisez
jamais de composés volatiles tels des insecticides sur le
boîtier, car ceci peut le décolorer ou l’endommager.
37) Si vous vous faites réparer ce téléviseur :
•Demandez au technicien du service de n’utiliser que des
pièces de rechange précisées par le fabricant.
•Une fois les réparations effectuées, demandez au technicien
du service d’exécuter des contrôles de sécurité afin de
s’assurer que le téléviseur fonctionne de façon sécuritaire.
31)
ATTENTION : RISQUES DE CHOCS ÉLECTRIQUES!
Ne renversez jamais de liquides dans les
fentes du boîtier du téléviseur et n’y
laissez jamais tomber d’objets.
38) Lorsque le téléviseur atteint sa durée utile, demandez à un
technicien du service qualifié d’en disposer comme il se doit.
Remarque: Cette ampoule contient du mercure. Pour des raisons
de respect de l’environnement, l’élimination du mercure pourrait
être soumise à certains règlements. Disposez de toutes ampoules
usées selon la méthode approuvée dans votre région. Pour
obtenir de l’information sur l’élimination ou le recyclage du
mercure, veuillez consulter les autorités de votre localité ou la
Electronics Industries Alliance (www.eiae.org).
32) Si la température ambiante monte subitement (le jour
même de la livraison, par ex.), il peut s’accumuler de la
vapeur sur la lentille et l’image peut paraître déformée ou
décolorée. Le cas échéant, éteignez le téléviseur pendant 6
à 7 heures et laissez s’évaporer la vapeur.
P A G E 4
Download from Www.Somanuals.com. All Manuals Search And Download.
562C-2~5(2)_fr 90/6/18 12:26 PM Page 5
Commentaires importants sur le téléprojecteur DLPMC
5) Gardez toujours une distance d’environ 10 à 25 pieds du
1) La source lumineuse de ce téléviseur est constituée d’une
ampoule de projection dont la durée utile est limitée.
Lorsque celle-ci s’use, l’image devient foncée ou noire, et si
l'ampoule tombe en panne, il faut la remplacer. Voir «
Remplacement de l'ampoule », pages 50 à 52.
téléviseur et, autant que possible, asseyez-vous droit devant.
Votre emplacement et le temps passé à regarder la télévision
peuvent affecter votre perception de la qualité de l’image. Le
fait de s’asseoir trop près du téléviseur pendant de longues
périodes risque de vous fatiguer les yeux. Voir l’article 29 de
la page 4.
2) Chaque fois que vous mettez le téléviseur sous tension, il
peut se passer plusieurs secondes avant que l’image passe du
blanc à la luminance intégrale.
6)
Ce téléviseur est doté de plusieurs ventilateurs
servant à en diminuer la température interne,
lesquels peuvent se faire entendre pendant et après
l’emploi du téléviseur.
3) L’afficheur de ce téléviseur est conçu selon une technologie
de très grande précision; il se peut cependant qu’à l’occasion,
un pixel (un point de lumière) s’affiche en permanence à
l’écran. Il s’agit là d’une propriété structurelle de la
projection par micro-affichage, propre à cette technologie de
téléprojection, plutôt que d’un indice de mauvais
7) Pour assurer une aération adéquate, placez toujours le
téléviseur à une distance d’au moins un (1) pouce de toute
surface verticale (un mur, par ex.).
fonctionnement. Ces pixels ne sont pas visibles lorsque le
visionnement de la télévision est à une distance raisonnable.
(voir l’article 29 de la page 4).
8) Passez en revue l’ensemble des renseignements relatifs à la
sécurité et à l’exploitation de ce téléviseur que contient ce
guide.
4) Selon le moyen de diffusion employé, certains
9) Les jeux vidéo dotés d’une manette de jeu simulant le tir
d’un « fusil » sur une cible à l’écran pourraient ne pas
fonctionner.
téléspectateurs pourraient apercevoir un « arc-en-ciel » à
l’écran (bien que cela soit peu probable) et les yeux peuvent
s’en trouver irrités (dans de rares cas). Ceci se produit
rarement avec ce type de technologie et n’indique nullement
dire un problème de fonctionnement du téléviseur.
Énoncé de conformité aux normes de la FCC
Conformément à la Partie 15 des règlements de la FCC, cet équipement a été testé et jugé conforme aux limites
prescrites pour les appareils numériques de classe B. Ces limites ont pour but d’offrir une protection raisonnable
contre le brouillage nuisible dans les installations résidentielles. Cet équipement génère, utilise et peut répandre des
fréquences radio et, s’il n’est pas installé et utilisé selon les directives, il peut nuire aux communications radio. Par
ailleurs, aucune installation ne saurait garantir l’absence totale de brouillage. Dans l’éventualité où cet appareil
brouillerait, de façon nuisible, les fréquences radio ou télévision (identifiable par la mise sous tension et hors
tension du téléviseur), nous invitons l’utilisateur à corriger l’interférence de l’une ou l’autre des façons suivantes :
- Réorienter ou déplacer l’antenne de réception.
- Augmenter la distance entre l’équipement et le récepteur.
- Brancher l’équipement dans une prise de courant dont le circuit diffère de celui où est raccordé le récepteur.
- Obtenir de l’aide du concessionnaire ou d’un technicien en radio/télévision compétent.
P A G E 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table des matières
Consignes de sécurité importantes . . . . . . . . . . . . . .2-4
ACM / Contrôle manuel de l’image . . . . . . . . . . . . . . .29
Options du menu Audio
Mode sonore / Son stable . . . . . . . . . . . . . . . . . . . . .30
Ambiophonie / Contrôle sonore manuel . . . . . . . . . . . .31
Sélection des signaux bilingues . . . . . . . . . . . . . . . .32
Options du menu heure
Commentaires importants sur votre téléprojecteur DLPmc . .5
Toshiba vous souhaite la bienvenue . . . . . . . . . . . . . . .7
Indicateurs de l’état des fonctions . . . . . . . . . . . . . . . .7
Étape 1. Raccordement du téléviseur
Panneau de raccordement arrière . . . . . . . . . . . . . . . . .8
Panneau de raccordement avant . . . . . . . . . . . . . . . . .9
Branchement de l’antenne / de la télévision par câble . .10
Raccordement à un convertisseur de câble . . . . . . . . . .11
Raccordement à un magnétoscope . . . . . . . . . . . . . . .12
Lecteur DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Entrée RBV-DTV/HDMI-DTV . . . . . . . . . . . . . . . . . . . .14
Entrée RGB-PC/HDMI-PC . . . . . . . . . . . . . . . . . . . . . .15
Installation de la sortie Écran . . . . . . . . . . . . . . . . . .16
Fonctions de la télécommande en mode TV . . . . . . .17-18
Affichages à l’écran . . . . . . . . . . . . . . . . . . . . . . . . .19
Commandes du panneau avant . . . . . . . . . . . . . . . . . .20
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21-22
Réglage de la pendule . . . . . . . . . . . . . . . . . . . . . .33
Réglage de la minuterie marche-arrêt . . . . . . . . . . . .34
Réglage de la minuterie / Arrêt automatique . . . . . . .35
Options du menu SPÉCIAL
Langue des menus à l’écran / Verrouillage . . . . . . . . . 36
Réglage des sous-titres . . . . . . . . . . . . . . . . . . . . .37
Sélection du mode Sous-titre / Texte . . . . . . . . . . . .38
Options du menu Ecran
Réglage automatique / Configuration manuelle . . . . . .39
Rapport hauteur / largeur / Réglage du mode Cinéma .40
NR / Initializing . . . . . . . . . . . . . . . . . . . . . . . . . .41
Options du menu Verrouillage
Réglage du verrouillage parental . . . . . . . . . . . . . . .42
Verrouillage parental . . . . . . . . . . . . . . . . . . . . . .43
Exploitation en mode d’image (I.D.I.) et Images doubles 44-45
Syntoniseur à images hors images(POP) . . . . . . . . . .45
Étape 2. Personnalisation des fonctions du
téléviseur Options du menu RÉGLAGE
Options du menu canal
Mise en circuit du téléviseur . . . . . . . . . . . . . . . . . .23
Repérage de canal . . . . . . . . . . . . . . . . . . . . . . . . .23
Portée utile de la télécommande . . . . . . . . . . . . . . .24
Mise en Mise en mémoire
suppression du canal en cours . . . . . . . . . . . . . . . . . .25
Réglage de l’accord précis . . . . . . . . . . . . . . . . . . .25
Surf list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Options du menu Image
Étape 3. Divers
Remplacement de l'ampoule . . . . . . . . . . . . . . . . .46-48
Programmation de la télécommande . . . . . . . . . . . . . .49
Codes de programmation . . . . . . . . . . . . . . . . . . .50-53
Dépannage . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55
Fiche technique du produit . . . . . . . . . . . . . . . . . . . .56
Garantie limitée au Canada
Garantie limitée aux États-Unis
Mode image . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Contrôle de température de couleur . . . . . . . . . . . . .28
Liste de contrôle de l’installation
Étape 1. Raccorder tous les équipements et les sources
Voir la pages 10 à 16.
Étape 2. Installer les piles de la télécommande et effectuer une recherche de chaîne
Voir la pages 23.
Étape 3. Régler les fonctions et options du téléviseur selon vos préférences. Voir le contenu ci-dessus.
Remarque : La conception et les spécifications peuvent être modifiées sans préavis.
P A G E 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba vous souhaite la bienvenue
Toshiba vous souhaite la bienvenue
Félicitations! Vous venez de faire l’acquisition de l’un des meilleurs téléprojecteurs DLPMC qui soient sur le marché. Ce guide a pour
mission de vous guider parmi les étapes d’installation et d’exploitation de ce téléviseur Toshiba pour que vous puissiez en jouir le
plus tôt possible.
Ce guide est destiné au modèle 44NHM84. Les numéros de modèle et de série sont inscrits à l'arrière du téléviseur. Veuillez les
inscrire dans les espaces réservés à cette fin, sur la page couverture de ce guide.
Les directives fournies dans ce guide présument l’utilisation d’une télécommande. Vous pouvez également utiliser les commandes
du téléviseur à condition que celles-ci soient identiques à celles de la télécommande.
Veuillez lire attentivement toutes les consignes de sécurité et les directives d’exploitation et ranger ce guide aux fins de référence
ultérieure.
Indicateurs de l’état des fonctions
Les témoins lumineux correspondant à l'ampoule, à l’exploitation et la température, situés en dessous des
commandes du panneau avant, vous révèlent l’état d’exploitation du téléprojecteur.
Témoin d’exploitation
Témoin de température
Témoin de l'ampoule
Éteint
Rouge
Vert
Cordon d’alimentation débranché.
Cordon d’alimentation branché; en mode veille.
Mise sous tension du téléviseur.
Témoin d’exploitation
Témoin de l'ampoule
Témoin de température
Orange (clignotant) Préparation à l’exploitation en mode veille.
Rouge (clignotant)
There is a problem with the lamp or around it. Communiquer
avec un centre de service autorisé.
Rouge
Lamp life over.
Vert (clignotant)
Rouge
Le couvercle de l'ampoule n’est pas fermé.
Le téléprojecteur a surchauffé et s’est éteint.
After viewing the phrase “Thermal High Error”.
Le téléprojecteur s’est éteint suite à une panne du ventilateur.
Communiquer avec un centre de service autorisé.
Thermal warning.
Rouge (clignotant)
Orange
P A G E 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Panneau de raccordement arrière
Raccordement des câbles et des équipements externes sur votre téléviseur.
COMPONENT
INPUT
1
INPUT
2
(R)
40i40/
576i/576p/
720p/1080i
40i80/
576i/576p/
720p/1080i
AUDIO
VIDEO
(L)/
MONO
MONITOR
OUT
A/V
INPUT
2
A/V
INPUT
1
PC/DTV
(SXGA/
480p/
Y
S-VIDEO
576p/
720p/
PB
S-VIDEO
1080i)
P
R
AV3
VIDEO
(L)
RGB INPUT
(L)
INPUT
U
P
G
R
A
D
E
MONO
P
O
R
T
(L)
AUDIO
(R)
AUDIO
(R)
AUDIO
(R)
DVI
/
RGB INPUT
HDMI INPUT
(S-VIDEO In)
Entrée S-Vidéo
Raccordement installé dans
certains appareils de haut de
gamme offrant une qualité
d’image supérieure avec
Vidéo 2.
COLORSTREAM HD
INPUT 1
INPUT 2
480i/480p/
720p/1080i
480i/480p/
720p/1080i
COLOURSTREAM HD
(VIDEO 1-2)Vidéo 1 et 2
Raccordement des sig-
naux vidéo provenant de
divers types
MONITOR VIDEO 2
VIDEO 1
INPUT
Raccordez un appareil vidéo/audio
ColorStream HD dans ces prises. Pour
obtenir de plus amples renseignements,
consultez le guide du DVD
OUT
INPUT
PC/DTV
(XGA/
480p/
720p/
1080i)
Y
P
B
S-VIDEO
d’équipements.
P
R
VIDEO
(L)
RGB INPUT
(L)
U
P
G
R
A
D
E
MONO
P
O
R
T
(L)
(AUDIO L/R)
AUDIO
(R)
AUDIO
(R)
AUDIO
(R)
Audio gauche / droite)
Sert à la transmission
stéréophonique d’autres
appareils.
HDMI INPUT
HDMI
connect a HDMI signal to
HDMI.
UPGRADE PORT
This port is used to upgrade
(RVB INPUT)
Entrée RVB
Raccorder le connecteur de
sortie d’un PC/d’une télé
numérique au port d’entrée
approprié.
Connecteur RF : Antenne
Sert au raccordement d’un câble
analogique ou de signaux d’an-
tenne directement dans le
téléviseur ou au moyen du con-
vertisseur de câbles.
the software version and debug
without changing the hardware.
Be careful not to use this port.
Just contact your dealer or ser-
vice centre.
Glossaire
PRISE
Raccordement à l’arrière d’un téléviseur, d’un magnétoscope ou de tout autre appareil audio/vidéo. Les prises HF et audio/vidéo à codes
couleur s’inscrivent dans cette description.
SIGNAL
Effet de l’image et du son circulant dans un câble, en liaison radio et à l’écran du téléviseur.
P A G E 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Panneau de raccordement avant
Du côté gauche de la face avant du téléprojecteur se trouvent
quatre prises servant à simplifier le raccordement d’appareils
vidéo et audio tels des jeux vidéo et des caméscopes.
Ces prises sont identiques à celles que l’on retrouve à l’arrière de
l’unité, sur le panneau de raccordement des prises. Ainsi, la plu-
part des appareils raccordés à ce type de prises à cet endroit
peuvent également se raccorder au panneau avant.
Pour utiliser les prises avant à titre de source sonore, il faut les
sélectionner au moyen du menu « Main Input » (Entrée princi-
pale) tel que décrit à la page 44. Elles se nomment « Front Video
» (Vidéo d’avant) au menu « Main Input » (Entrée principale).
Si vous branchez à la fois Front Video
(Vidéo d’avant) et S-Video, seul S-
Video fonctionnera
W
Si vous raccordez un appareil de jeux
vidéo, assurez-vous de modifier les
réglages de l’image au moyen de l’op-
tion « Picture Mode » (Mode Image)
au menu « Vidéo». Voir la page 27.
W
Front A/V Panel
(Left/Right Audio)
Audio gauche/droite
Sert à obtenir la stéréo-
phonie avec divers types
d’appareils.
(R)
AUDIO
(L)/
MONO
VIDEO
(Video) Vidéo
Raccordement des sig-
naux vidéo de tous
types d’appareils.
S-VIDEO
S-Video
FRONT A/V
Raccordement offert sur cer-
tains appareils de haut de
gamme pour offrir une qualité
d’image meilleure que celle
d’une simple sortie vidéo.
Glossaire
CBLES A/V
Câbles audio / vidéo et trois raccords de câbles dont le raccord audio de droite (rouge), audio de gauche (blanc) et vidéo (jaune).
Les câbles A/V servent à la lecture stéréophonique de vidéocassettes et à procurer une image et un son d’une qualité supérieure à
celle d’autres appareils A/V.
APPAREIL A/V Tout appareil produisant des images vidéo ou des sons (magnétocassette, lecteur DVD, convertisseur du câble ou téléviseur).
P A G E 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Branchement de l’antenne / de la télévision par Câble
Prise murale du
câble
Branchez l’antenne ou le câble dans le
téléviseur tel qu’indiqué ci-contre.
1
Antenna
Consultez la page 23 pour effectuer une
recherche des canaux avec le balayage des
canaux pour connexion d'antenne/câble.
2
Câble coaxial RF
(75 ohm)
Câble coaxial RF
(75 ohm)
COLORSTREAM HD
INPUT
INPUT
2
1
480i/480p/
720p/1080i
480i/480p/
720p/1080i
Y
P
B
PR
(L)
AUDIO
(R)
Si le signal RF provient d’une
W
antenne ancienne de plusieurs
années, raccordée au moyen de
deux petites broches, il vous fau-
dra vous procurer un adaptateur
pour 300 à 75 ohm. Votre four-
nisseur de produits électroniques
local devrait en avoir.
Attention: RISQUES DE DOMMAGES À
L’ÉQUIPEMENT!
Ne jamais brancher de cordons d’alimentation
avant d’avoir raccordé tous les équipements.
Pour prévenir le brouillage, nous
W
vous conseillons d’utiliser un câble
de 75 ohm pour raccorder l’an-
tenne.
Pour une meilleure réception, nous vous conseillons de demander à un technicien professionnel
de régler l’antenne.
P A G E 1 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Raccordement à un convertisseur de câble
Tableau de connexion murale de la
télévision par câble
Repérez la prise de sortie à l’arrière du
1
convertisseur . Raccordez-la à la prise de
l’antenne à l’arrière du téléviseur.
Vous pouvez également repérer les prises
vidéo et audio à l’arrière du convertisseur,
puis raccorder celles-ci selon les direc-
tives fournies avec votre équipement.
Vous pouvez jumeler ceci au branchement
de tout autre équipement désiré.
In
Out
Output
Switch
3
4
Câble coaxial RF
(75 ohm)
Boîte de jonction
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
S-VIDEO
VIDEO
(L)
Audio
Video
MONO
R
L
TV
AUDIO
(R)
VCR
Si vous utilisez un convertisseur, laissez le
téléviseur syntonisé à la chaîne 3 ou 4, puis
changez de chaîne à l’aide du convertisseur.
W
Si vous utilisez une boîte de conversion, cer-
taines fonctions dont la programmation, l'af-
W
fichage et le verrouillage de vos canaux
préférées ne seront pas accessibles au moyen
de la télécommande.
P A G E 1 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Raccordement à un magnétophone
Repérez la prise d’antenne à l’ar-
rière du téléviseur. Raccordez-la à
la prise de sortie RF derrière le
1
magnétoscope.
Ou, repérez les prises vidéo et
audio composites à l’arrière du
magnétoscope, puis raccordez-les
selon les directives fournies avec
l’équipement.
Tableau de connexion murale de la
télévision par câble
Vous pouvez raccorder les câbles
vidéo composite ou S-Video au
téléviseur. (Vous ne pouvez
cependant pas raccorder à la fois
les câbles vidéo composite et S-
Video, car seul S-Video fonction-
nera.
Antenna
Fil rond de 75
ohm
Câble coaxial RF
(75 ohm)
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
S-VIDEO
Panneau A/V arrière
VIDEO
(L)
Output
Switch
In
MONO
3
4
Out
S-Video
Audio
Video
AUDIO
(R)
R
L
Câbles A/V non fournis
avec le téléviseur
Magnétoscope
Pour obtenir la stéréophonie en mode télévision
W
W
par câble ou à partir du magnétoscope, vous
devez raccorder les câbles A/V ainsi que le
câble qui passe du magnétoscope au téléviseur.
Les lois sur le droit d’auteur aux États-Unis et
dans d’autres pays interdisent tout enreg-
istrement, utilisation de listes de distribution
ou révisions non autorisées de tout pro-
gramme télévisé, enregistré sur vidéocassette,
sur DVD ou par tout autre moyen. Le cas
échéant, la responsabilité civile ou criminelle
pourrait vous incomber.
Si vous désirez que les signaux vous parvien-
nent sur la chaîne 3 ou 4, repérez la prise de
sortie du téléviseur sur le magnétoscope.
Raccordez-y un câble jusqu’à la prise d’entrée
de l’antenne à l’arrière du téléviseur.
P A G E 1 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Lecteur DVD
Repérez les prises audio et
1
ColorStream HD ou S-Vidéo à l’ar-
rière du lecteur DVD, puis rac-
cordez-les en suivant les directives
fournies avec l’équipement.
Vous pouvez raccorder les câbles
vidéo à composante ou S-Vidéo à
votre téléviseur. Ne raccordez pas
à la fois le câble pour vidéo à
composante et S-Vidéo.
Lecteur DVD
Certains lecteurs DVD de haut de
gamme font appel à un système
de reproduction de l’image
Panneau A/V arrière
nommé « COLORSTREAM HD
Video. » Si votre lecteur DVD est
doté d’une sortie « COLORSTREAM
HD », utilisez les connecteurs
marqués « COLORSTREAM HD 1/2
» au panneau de connexions.
Veuillez consulter le guide fourni
avec votre lecteur DVD pour des
directives sur la bonne manière
de l’installer.
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
Dolby Digital
Out
Audio
S-Video
Component Video
L
R
COLORSTREAM HD
INPUT 1
INPUT 2
S-VIDEO
480i/480p/
720p/1080i
480i/480p/
720p/1080i
VIDEO
(L)
MONO
Y
AUDIO
(R)
P
B
P
R
(L)
AUDIO
(R)
Câbles A/V non
fournis avec le
téléviseur
téléviseur
• Ports d’entrée COLORSTREAM HD
Raccordez les prises du lecteur DVD aux prises
d’entrée COLORSTREAM HD tel qu’indiqué ci-
après.
Entrée COLORSTREAM HD 1 (ou 2)
Y
PB
PR
1920X1080i
1280X720p
720X480p
720X480i
Prises entrée COLORSTREAM
Y
PB
PR
HD sur le téléviseur
Pr
R-Y
Cr
Y
Y
Y
Y
Pb
B-Y
Cb
Prises sortie vidéo
du lecteur DVD
PR
PB
Glossaire
ColorStream HD VIDEO
Certains équipements vidéo utilisent trois lignes distinctes (Y, PB, PR) pour reproduire plus précisément les images. Le
guide qui accompagne votre équipement vidéo fournit des explications sur la manière dont ceci se rapporte à votre
équipement.
P A G E 1 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Entrée RBV-DTV/HDMI-DTV
Récepteur DBS
Repérez les prises audio et Y, PB,
1
PR/RVB/HDMI (Y, PB, PR/RVB/DVI) à l’ar-
rière du récepteur DBS (de radiodiffusion
par satellite), puis raccordez-les selon les
directives fournies avec votre équipement.
Component Out Dolby Digital
Audio
Y
Pb Pr
Out
L
R
COLORSTREAM HD
INPUT
1
INPUT
2
480i/480p/
720p/1080i
480i/480p/
720p/1080i
Y
Raccordez ces câbles au téléviseur de la
manière indiquée ci-contre.
P
B
2
Câbles A/V non
fournis avec le
téléviseur
P
R
)
AUDIO
R)
Récepteur DBS
COLORSTREAM HD
INPUT
2
INPUT
1
Audio
Dolby Digital
Out
L
R
480i/480p/
720p/1080i
480i/480p/
720p/1080i
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
PC/DTV
Y
(XGA/
PB
S-VIDEO
P
R
VIDEO
(L)
RGB INPUT
(
U
P
G
R
A
D
E
MONO
P
O
R
T
(L)
AUDIO
au
AUDIO
(R)
AUDIO
(R)
Câbles A/V non
fournis avec le
téléviseur
HDMI INPUT
La télé numérique (DTV) présente une image optimale en mode 720p.
W
W
W
Ce téléviseur prend en charge le protocole de protection du contenu
numérisé sur large bande (HDCP) en mode DVI-DTV (480p, 720p, 1080i).
Sélectionnez RVB-DTV Source (source Rouge-Vert-Bleu- télé
numérique) et appuyez sur la touche ENTER de la télécommande.
Sélectionnez les options désirées (H-Position/Phase) au moyen des
flèches vers le HAUT et le BAS, puis utilisez les flèches vers la GAUCHE
et la DROITE pour effectuer les réglages requis.
RVB-DTV/HDMI-DTV
Signal COLORSTREAM HD1 COLORSTREAM HD2 RVB-DTV/HDMI-DTV
HD-SET TOP
1920x1080i
1280x720P
720x480P
480i
480p
720p
1080i
Oui
Oui
Oui
Oui
Oui
Oui
Oui
Oui
Non
Oui
Oui
Oui
P A G E 1 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Entrée RVB-PC/HDMI-PC
Repérez les prises audio et RVB ou DVI à
1
2
l’arrière de votre PC puis raccordez-les en
suivant les directives fournies avec votre
équipement.
Raccordez ces câbles au téléviseur, tel
qu’indiqué.
Ordinateur
COLORSTREAM HD
INPUT 1
INPUT 2
480i/480p/
720p/1080i
480i/480p/
720p/1080i
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
PC/DTV
(XGA/
Y
P
B
S-VIDEO
P
R
VIDEO
(L)
RGB INPUT
()
MONO
U
P
G
R
A
D
E
P
O
R
T
(L)
AUDIO
)
AUDIO
(R)
AUDIO
(R)
HDMI INPUT
Sélectionnez RVB-PC Source et appuyez sur ENTER. Sélectionnez
W
les options désirées (H-Position/V-Position/H-Size/V-Size/Phase)
à l’aide des flèches vers le HAUT et le BAS puis utilisez les flèches
vers la GAUCHE et la DROITE pour effectuer les réglages requis.
- Position horizontale et verticale, taille horizontale et verticale : la
plage de réglage peut varier en fonction du mode d’entrée (réso-
lution).
Entrée RVB-PC/HDMI-PC
MODE
Résolution Horizontal
Vertical
Text
640x350
640x480
640x480
640x480
640x480
800x600
800x600
800x600
800x600
800x600
1024x768
1024x768
1024x768
1024x768
31.5KHz
31.5KHz
37.9KHz
37.5KHz
43.3KHz
35.2KHz
37.9KHz
48.1KHz
46.9KHz
53.7KHz
48.4KHz
56.5KHz
60.0KHz
68.7KHz
70Hz
60Hz
72Hz
75Hz
85Hz
56Hz
60Hz
72Hz
75Hz
85Hz
60Hz
70Hz
75Hz
85Hz
- PHASE: sert à supprimer les bruits horizontaux et à effacer les
caractères ou à les rendre plus nets. La plage de réglage varie
entre 0~63.
VGA
Format d’entrée de la synchronisation : signaux distincts
W
W
Parce que la technologie HDMI est en évolution constante, il se
peut que certains appareils raccordés par l’entremise du HDMI /IN
ne fonctionnent pas correctement avec ce téléviseur.
SVGA
XGA
You need HDMI-to-DVI adapter cable to connect DVI device to this TV.
W
W
In HDMI-PC mode, H position, V pisition are only worked.
P A G E 1 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation de la sortie Écran
Votre téléviseur est doté d’une fonction
1
particulière de sortie audio vous permet-
tant d’y raccorder un deuxième téléviseur
ou un deuxième écran.
Il suffit de raccorder le deuxième
téléviseur ou écran aux prises Audio/Video
MONITOR OUT situées à l’arrière du
2
téléviseur. Consultez le guide d’utilisation
fourni avec le deuxième téléviseur ou
écran pour obtenir de plus amples détails
sur les réglages d’entrée de ces appareils.
Deuxième téléviseur
MONITOR VIDEO 2
OUT INPUT
VIDEO 1
INPUT
S-VIDEO
VIDEO
(L)
MONO
U
P
G
R
A
D
E
P
O
R
T
S-Video
Audio
Video
AUDIO
(R)
HDMI INPUT
Câbles A/V non fournis
avec le téléviseur
Les sources d’entrée COLORSTREAM HD1 – 2,
RVB-DTV/PC et HDMI-DTV/PC correspondant à
l’image principale ne peuvent être utilisées avec
les sorties d’écran (Monitor Out).
W
P A G E 1 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Fonctions de la télécommande en mode TV
MODE
Sert à choisir le mode d’exploita-
tion à distance : TV, VCR, Cable,
DVD et Satellite. Sélectionnez
d’autres modes d’exploitation pour
contrôler d’autres appareils au
moyen de la télécommande.
TÉMOINS
Indique l’état d’activité de la
télécommande chaque fois
qu’on enfonce une touche.
VCR CABLE DVD
TV
SAT
TV/VIDEO (TÉLÉ / VIDÉO)
Choix de sources d’entrées dont :
Analog, Video 1, Video 2, Front
video, ColorStream HD1-2, RVB et
HDMI (RVB et HDMI).
ÉCLAIRAGE
Illumine les touches de télécom-
mande.
MODE
LIGHT
POWER
TV/VIDEO
C/S HD1
FRONT
HDMI
RGB
FRONT (AVANT)
Sélection du signal vidéo avant
lorsqu’un appareil tel un camés-
cope ou un appareil de jeu est
raccordé à la prise d’entrée vidéo
avant.
HDMI
C/S HD2
Permet de choisir les sources
d’entrée HDMI-DTV et HDMI-
PC.
1
4
2
5
8
0
3
6
9
SURF (NAVIGATION)
Permet de parcourir la liste
des canaux.
MUTE (ASSOURDIR)
Permet d’activer et de désactiver le
son.
7
VIDEO (VIDÉO)
Sert à ajuster les réglages
prédéfinis en usine de l’image
en fonction de la pièce.
SAP (SPA – SECONDE
PISTE AUDIO)
Sélection Mono, Stéréo et SAP.
CH RTN
ENTER
VOL
CH
MUTE
SURF
PIP (I.D.I. - IMAGE DANS
L’IMAGE)
Permet de basculer entre les modes
I.D.I., POP (S.I. – Surimpression
d’images) et Twin (Images doubles).
SAP
VIDEO
SWAP (ÉCHANGE)
Sert à faire commuter l’image
à PIP, POP ou Twin à l’écran
principal.
PIP
PIPCH- PIPCH+ SWAP
PIPCH-(CANAUX PIP)
Permet de passer à une
chaîne PIP inférieure.
PIPCH+ (CANAUX PIP +)
Permet de passer à une chaîne
PIP supérieure.
CC
FREEZE
PIP INPUT
PIC SIZE
THUMBSTICK (MOLETTE)
Permet de naviguer les menus à
FREEZE (ARRÊT SUR IMAGE)
Sert à saisir l’image principale en
cours et à l’arrêter. Sub picture is
frozen in PIP/DW picture mode.
l’écran pour ajuster les réglages et les
préférences du système. Il suffit d’ac-
céder à une fonction à l’aide des
D
E
toucheF Get de choisir l’option en
MENU
EXIT
REC
surbrillance accompagnée d’un
.
EXIT (SORTIE)
Sert à effacer tout affichage à
l’écran et à revenir au mode
d’écoute de la télévision à
partir de n’importe quel
menu.
MENU
Affiche le menu principal
à l’écran.
PLAY
REW
PAUSE STOP
FF
SKIP
P A G E 1 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Fonctions de la télécommande en mode TV
VCR CABLE DVD
TV
SAT
MODE
LIGHT
POWER
POWER (MARCHE/ARRÊT)
Mise sous tension et hors tension
du téléviseur et de tout autre
appareil, selon le mode en cours.
TV/VIDEO
C/S HD1
FRONT
HDMI
RGB
C/S HD1,HD2
Sert à sélectionner des signaux
ColorStream HD provenant de sources
telles qu’un lecteur DVD ou un écran
HD.
C/S HD2
RVB (RVB – ROUGE,
VERT, BLEU)
Sélection des sources d’en-
trée RVB-DTV et RVB-PC.
1
4
2
5
8
0
3
6
9
CLAVIER NUMÉRIQUE
Sert à la sélection directe de canaux
et de fonctions de programmation.
7
ENTER (ENTRÉE)
Sert à choisir les options en sur-
brillance à partir des menus et
autres affichages à l’écran.
CH RTN (RETOUR DE
CHAÎNE)
Permet de revenir à la chaîne
précédente.
CH RTN
ENTER
VOL
CH
MUTE
SURF
SAP
VIDEO
CHANNEL UP/DOWN
(CHAÎNE PRÉCÉDENTE /
SUIVANTE)
Scrolls through available chan-
nels in EZ Scan memory.
RÉGLAGE DU VOLUME
Permet de régler le volume du sonD
.
E
PIP
PIPCH- PIPCH+ SWAP
PIC SIZE (TAILLE DE L’IM-
AGE)
Sert à modifier le format de l’im-
age ou le rapport hauteur/largeur.
CC
FREEZE
PIP INPUT
PIC SIZE
PIP INPUT (ENTRÉE I.D.I.)
Sert à sélectionner la source d’en-
trée des sous-images.
CC (SOUS-TITRES CODÉS)
Sert à choisir le mode sous-titres
codés aux fins d’affichage de l’in-
formation (à condition que l’émis-
sion le prenne en charge).
ENTER (ENTRÉE)
Sert à sélectionner les
options en surbrillance dans
les menus et autres affichages
à l’écran.
MENU
EXIT
REC
PLAY
REW
PAUSE STOP
REC, PAUSE, REW, FFWD,
PLAY, STOP (ENREG-
ISTREMENT, PAUSE, REBOBI-
NAGE, AVANCE RAPIDE,
ÉCOUTE, ARRÊT)
FF
SKIP
SKIP (SAUT)
Lecture de CD : sélection des
chansons. Lecture DVD :
sélection des chapitres des
films.
Sert au contrôle des fonctions du
téléviseur.
P A G E 1 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Affichages à l’écran
Cette page décrit les options d’affichages et de bannières d’informations à l’écran.
Affichage du canal principal
Affiche le numéro de la chaîne
présentement écoutée.
Affichage I.D.I.
Données affichées
lorsque la fonction
I.D.I. est activée.
TV 13
CATV 16
11:17 AM
Mute
10
Assourdir
S’affiche
lorsque le son
est assourdi.
Volume
Affichage du niveau de l’audio pen-
dant le réglage du son.
P A G E 1 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Commandes du panneau avant
1
3
6
8
2
5
4
7
POWER
1
MENU
2
ENTER (ENTRÉE – identique à la touche ENTER de
la télécommande)
3
VOLUME FORT / FAIBLE
4
5
6
CHAÎNE PRÉCÉDENTE / SUIVANTE
Témoin d’exploitation (Voir la page 7).
Témoin de l'ampoule (Voir la page 7).
Témoin de température (Voir la page 7).
Consulter les pages du menu pour des directives sur
la manière d’utiliser les menus à l’écran.
W
W
W
7
8
Les touches POWER, MENU, ENTER, VOLUME et CHAN-
NEL fonctionnent de la même manière que celles de
la télécommande.
Si vous déplacez le téléviseur d’une pièce froide à
une pièce à température normale, il peut se faire de
la condensation dans le téléviseur. Attendre 6 à 7
heures avant de le mettre en marche pour qu’il s’a-
juste à la température ambiante.
P A G E 2 0
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI
- HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing.
- This set can receive the High-Definition Multimedia Interface (HDMI) or Input of Digital Visual Interface(DVI).
- This set supports HDCP (High-bandwidth Digital Contents Protection) Protocol for the set (480p, 720p, 1080i)
modes.
- When you Connect with HDMI Source Devices (DVD Player or Set Top Box or PC) supporting Auto HDMI func-
tion, automatically, support Plug & Play and then set the HDMI Source Devices (640 x 480p). After reading in
HDMI Source Devices using Display Data Channel(DDC) Protocol, EDID stored in the set is used. If HDMI Source
Devices not supported Auto HDMI is been, the Resolution is set, manually.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
- When Source Devices have DVI Output Connector, you must connect audio with separated cable.(Refer to <How
to connect>)
How to connect
1. When Source Devices (DVD Player or Set Top Box) support HDMI.
- If Source Devices have HDMI Output Connector, Source Devices connect to the set with HDMI Cable .(not sup-
plied with the product).
- If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in 1280 x 720p. But
if the resolution has to be changed manually refer to the source devices owner manual.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- Because HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using HDMI Cable.
2. When Source Devices (DVD Player or Set Top Box) supports DVI.
- If Source Devices have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not
supplied with the product).
- If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1280 x 720p. But
if the resolution has to be changed manually refer to the source devices owner manual.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- In this case, Audio use other cable. When Source Devices have Analog Audio Output Connector, RVB/DVI Audio
Input of the set connect to Audio Cable (not supplied with the product). And then you can listen to normal
Audio.
3. When PC supports DVI.
- If PC have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not supplied with
the product).
- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
- Use the the set’s HDMI (VIDEO) for video connections, depending on your PC connector.
- If the graphics card on the PC does not output analog RVB and DVI simultaneously, connect only one of either
RVB Input or HDMI Input to display the PC on the set.
- If he graphics card on the PC does output analog RVB and DVI simultaneously, change the input to either RVB
Input or HDMI Input; (the other mode is set to Plug and Play automatically by the set.)
- Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required.
- In this case, Audio use other cable. When PC (or sound card of PC) have Analog Audio Output Connector, RVB/DVI
Audio Input of the set connect to Analog Audio Cable (not supplied with the product). And then you can listen
to normal Audio.
P A G E 2 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Référence
Échantillon de câble
Câble HDMI
(non fourni)
Câble audio analogique
(type RCA) (non fourni)
Câble audio analogique (stéréo à type RCA)
Câble HDMI à DVI
(non fourni)
(non fourni)
How to use
1. Connect the HDMI Source Devices(DVD Player or Set Top Box or PC) and the set.
2. Turn on the display by pressing the POWER button on the set and HDMI Source Devices remote control.
3. Select HDMI Input source in Main Input option of PIP/DW menu.
4. Check the image on your set. There may be noise associated with the resolution, vertical pattern, contrast or
brightness in HDMI Source Devices. If noise is present, change the HDMI Source Devices to another resolution,
change the refresh rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh
rate of the PC graphics card can not changed, change the PC graphics card or consult the manufacturer of the PC
graphics card.
Notes:
- Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.
- Avoid keeping a fixed image on the set screen for a long period of time. The fixed image may become permanent-
ly imprinted on the screen. Use the Orbiter screen saver when possible.
- When Source Devices connected HDMI Input, output PC Resolution(VGA, SVGA, XGA), Position, Size may not fit to
Screen. As shown the lower picture, press the MENU button to adjust the screen Position of the set and contact an
PC graphics card service center.
- When Source Devices connected HDMI Input output the set Resolution(480p, 720p, 1080i), the set Display fit
EIA/CEA-861-B Specification to Screen. If not, refer to the Manual of HDMI Source Devices or contact your service
center.
- In case HDMI Source Devices is not connected Cable or poor cable connection, "No Signal" OSD display in HDMI
Input. And In case of Video Resolution not supported the set output in HDMI Source Devices, "No Signal" OSD dis-
play. Refer to the Manual of HDMI Source Devices or contact your service center.
P A G E 2 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Mise en circuit du téléviseur
1.Consultez les pages 10 à 16 pour raccorder des équipements externes au téléviseur. Si c’est
déjà fait, branchez le téléviseur à une prise de courant standard de 120V, 60 Hz, non com-
mutée
2. Si c’est déjà fait, enlevez la partie arrière de la télécommande pour y installer des piles
AA. Faites en sorte d’installer les piles correctement (vérifiez les symboles +/-).
back of
remote
3. Avec la télécommande en main, appuyez sur la touche POWER (de mise sous tension) pour
mettre le téléviseur en marche.
Attention: ne jamais jeter de piles dans les
flammes.
Repérage de canal
VCR CABLE DVD
TV
SAT
- Refaire la programmation automatique si l’affichage plasma est
déplacé dans un autre endroit.
MODE
LIGHT
POWER
- La programmation automatique fonctionne seulement avec ANT.
branché.
- Si l’indicatif du canal pour la diffusion hors antenne et télédistrib-
ution est doublé où différents canaux ont le même indicatif, press-
er les mêmes touches de nou-veau pour alterner entre eux.
3
TV/VIDEO
C/S HD1
FRONT
HDMI
RGB
C/S HD2
1
4
2
5
8
0
3
6
9
télédistribution
télé générale sans fil
: (par exemple, presser 17 pour aller au canal, presser 17 de nou-
veau pour aller à l’autre canal).
7
CH RTN
ENTER
6
VOL
CH
MUTE
SURF
CHANNEL
Déchiffrage
Manuelle
Surf list
G
Démarrez
SAP
VIDEO
PICTURE
AUDIO
PIP
PIPCH- PIPCH+ SWAP
TIMER
CC
FREEZE
PIP INPUT
PIC SIZE
SPECIAL
SCREEN
PIP/DW
LOCK
4/5/6
5/6
6
Menu Préc.
MENU
EXIT
REC
4
PLAY
REW
PAUSE STOP
4.Presser la touche MENU puis la touche D / E pour sélectionner
4/5/6
menu CHANNEL.
FF
SKIP
5.Presser la touche G puis la touche
pour sélectionner
/ E
D
A.PROG.
6.Press the ENTER button or the G button to start Auto program
channel search.
Si l’on désire arrêter la programmation automatique, presser
ENTER. Seuls les canaux trouvés jusqu’à ce point seront mis
en mémoire.
P A G E 2 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Portée utile de la télécommande
30°
30°
9m
12m
TV
VCR CABLE DVD
SAT
MODE
LIGHT
POWER
TV/VIDEO
C/S HD1
FRONT
DVI
C/S HD2
RGB
1
4
2
5
8
0
3
6
9
7
ENTER
C
H
R
T
N
VOL
CH
MUTE
SURF
SAP
VIDEO
PIP
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
MENU
EXIT
REC
PLAY PAUSE STOP
REW
FF
SKIP
Pour un rendement optimal, pointez la télécommande en ligne droite sur le téléviseur et assurez-vous qu’il
n’y ait aucun objet entre la télécommande et le téléviseur.
• Si la télécommande du téléviseur Toshiba ne vous per-
W
met pas d’exploiter toutes les fonctions des autres
appareils, utilisez alors de la télécommande corre-
spondant à ces appareils.
• Jetez les piles dans des endroits désignés à cette fin.
• En disposant des piles, prêtez attention aux divers
aspects environnementaux.
• Ne pas mêler divers types de piles ni utiliser des piles
neuves avec des piles usées.
• Si la télécommande cesse de fonctionner correcte-
ment, ou si la portée utile diminue, remplacer les
deux piles par des piles neuves.
• Si les piles sont mortes ou que vous n’utilisez pas la
télécommande pendant longtemps, enlevez les piles
afin d’empêcher l’écoulement de l’acide dans le com-
partiment à piles.
P A G E 2 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Mise en Mise en mémoire
CHANNEL
PICTURE
AUDIO
Déchiffrage
Manuelle
Surf list
G
TV
2
Marche
0
Mémoire
Synto
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
suppression du canal en cours
-L’on peut ajouter ou effacer des canaux de la mémoire.
1.Presser la touche MENU puis la touche D / E pour sélectionner menu CANAL.
2. Presser la touche G , puis la touche D / E pour sélectionner Manuelle.
3. Presser la touche G , puis la touche D / E pour sélectionner Mémoire.
4. Presser la touche F / G pour sélectionner Marche ou Arrêt.
5. Presser ENTER pour sauvegarder.
Réglage de l’accord précis
- Cette fonction règle l’image en position stable lorsqu’elle est faible.
CH RTN
ENTER
0
5
VOL
CH
MUTE
SURF
1.Presser la touche MENU puis la touche D / E pour sélectionner menu CANAL.
2. Presser la touche G , puis la touche D / E pour sélectionner Manuelle.
3. Presser la touche G , puis la touche D / E pour sélectionner Fine.
4. Presser la touch F / G pour régler l’apparence de l’image selon ses préférences.
5. Presser ENTER pour sauvegarder.
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
5
1/2/3
2/3/4
Remarques
4
• Pour annuler la mise en mémoire de l’accord précis, programmer de
nouveau le canal syntonisé par la Déchiffrage ou Manuelle.
• Si le canal réglé est mis en mémoire, la couleur de l’indicatif du
canal passe au jaune.
MENU
EXIT
REC
1
PLAY
REW
PAUSE STOP
1/2/3
FF
SKIP
P A G E 2 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Surf list
- Les Surf Channels une fonction pratique permettant de balayer jusqu’à 8
canaux sans avoir à passer par tous les canaux entre les canaux.
CHANNEL
PICTURE
AUDIO
Déchiffrage
Manuelle
Surf list
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
G
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu CHAN-
NEL.
2. Presser la touche G , puis la touche D / E pour sélectionner Surf list.
3. Press the G button and then use D / E button to select the first surf chan-
nel position.
4. Use the F / G button to set the desired channel number for first surf chan-
nel.
5. Repeat steps 3 to 4 to memorize other surf channels.
6. Presser ENTER pour sauvegarder.
CH RTN
ENTER
0
6
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
• Pour sélectionner le canal préféré, presser de façon répétitive la touche
SURF. 8 surf channels figurent à l’écran un par un.
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
6
1~4
2/3/4
4
MENU
EXIT
REC
1
PLAY
REW
PAUSE STOP
1~4
FF
SKIP
P A G E 2 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode image
Réglez l’image en fonction de vos préférences et de votre manière de visionner.
- Vous pouvez régler l’image manuellement (contraste, Brillance, couleur, etc.).
- Vous pouvez également prédéterminer une valeur à partir du menu Mode Image en fonction de la catégorie de programme.
Heure
CHANNEL
PICTURE
AUDIO
Mode image
G
Standard
Soirée
Film
Température couleur
ACM
Contraste
Brillance
Couleur
Netteté
100
55
55
60
0
Jeu vidéo
Sports
Arrêt
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Teinte
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu PICTURE.
2. Presser la touche G , puis la touche D / E pour sélectionner Mode image.
3. Presser la touche G , puis la touche
pour sélectionner Heure,
/ E
D
Standard, Soirée, Film, Jeu vidéo ou Sports sont préréglées et program-
mées pour une bonne qualité d’image à ‘usine et ne peuvent être modifiées.
4. Presser ENTER pour sauvegarder.
CH RTN
ENTER
0
4
VOL
CH
MUTE
SURF
• Heure (Lumière du jour) Sert à augmenter les niveaux des réglages
de l’image en fonction des conditions d’éclairage.
Standard (Éclairage normal) Sert à remettre les niveaux de réglage
de l’image à l’état initial.
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
Soirée (Nuit) Sert à réduire les niveaux de réglage de l’image en
fonction de l’éclairage le soir et la nuit.
Film Sert à ajuster les réglages vidéo en fonction de l’écoute d’un
film. Les niveaux de contraste et de définition sont réduits pour que
les couleurs de l’image soient chaudes et adoucies.
Jeu vidéo Sert à fixer les réglages à des niveaux appropriés pour les
jeux. Les niveaux de contraste et de couleur sont réduits afin d’élimin-
er les reflets.
Sports Sert à fixer les réglages à des niveaux appropriés pour les
événements sportifs. Les niveaux de contraste et de couleur sont aug-
mentés pour que les scènes de jeu apparaissent claires et brillantes.
Arrêt Permet de régler l’image en fonction de ses préférences.
CC
FREEZE
PIP INPUT
PIC SIZE
4
1/2/3
2/3
MENU
EXIT
REC
1
PLAY
REW
PAUSE STOP
1/2/3
FF
SKIP
P A G E 2 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrôle de température de couleur
Réglage de contrôle automatique de couleur
-Pour initialiser la valeur réglée, sélectionner Normal.
CHANNEL
Mode image
Froide
Température couleur G
PICTURE
ACM
Normal
Chaude
Personnel
Contraste
Brillance
Couleur
Netteté
100
55
55
60
0
AUDIO
TIMER
Rouge
Vert
0
0
0
SPECIAL
SCREEN
PIP/DW
LOCK
Bleu
Teinte
Menu Préc.
CH RTN
ENTER
0
4
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
1. Presser la touche MENU puis la touche D / E pour sélectionner menu PICTURE.
CC
FREEZE
PIP INPUT
PIC SIZE
2. Presser la touche G , puis la touche
pour sélectionner Température
/ E
D
couleur.
1/2/3
2/3
4
3. Presser la touche G , puis la touche D / E pour sélectionner Froide ,
Normal ou Chaude.
MENU
EXIT
REC
1/2/3
4. Presser ENTER pour sauvegarder.
1
PLAY
REW
PAUSE STOP
FF
SKIP
Contrôle de température de couleur manuel
(option Personnel )
CH RTN
ENTER
0
-L’on peut régler le rouge, le vert et le bleu à toute température de couleur désirée.
6
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
1. Presser la touche MENU puis la touche D / E pour sélectionner menu PICTURE.
PIPCH- PIPCH+ SWAP
2. Presser la touche G , puis la touche
pour sélectionner Température
/ E
D
couleur.
CC
FREEZE
PIP INPUT
PIC SIZE
3. Presser la touche G , puis la touche D / E pour sélectionner Arrêt .
6
1~4
2~5
4. Presser la touche G , puis la touche D / E pour sélectionner Rouge , Vert ou
Bleu .
5
5. Presser la touche F / G pour effectuer le réglage.
MENU
EXIT
REC
1~4
1
• La gamme de réglage du Rouge , Vert ou Bleu va de -30 à +30.
PLAY
REW
PAUSE STOP
6. Presser ENTER pour sauvegarder.
FF
SKIP
P A G E 2 8
Download from Www.Somanuals.com. All Manuals Search And Download.
ACM (Active Color Management)
- Adjust the ACM to select the desired skin colour option.
- This function works in the following mode:
TV, Video 1-2, Front Video Colorstream HD 1-2, RVB-DTV, HDMI-DTV.
CHANNEL
PICTURE
AUDIO
Mode image
Température couleur
ACM
G
100
55
Ton de chair
Tons verts
Tons bleus
0
0
0
Contraste
Brillance
Couleur
Netteté
TIMER
55
60
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu PICTURE.
2. Presser la touche G , puis la touche D / E pour sélectionner ACM.
3. Presser la touche G , puis la touche F / G pour effectuer le réglage.
4. Presser ENTER pour sauvegarder.
Contrôle manuel de l’image ( option Arret )
CH RTN
ENTER
0
4
- L’on peut régler le contraste, la brillance, la couleur, la netteté et la teinte
selon ses préférences.
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
CHANNEL
PICTURE
AUDIO
Mode image
Température couleur
ACM
CC
FREEZE
PIP INPUT
PIC SIZE
Contraste
Brillance
Couleur
Netteté
100 G
55
4
TIMER
55
1/2
2/3
60
SPECIAL
SCREEN
PIP/DW
LOCK
Teinte
0
3
MENU
EXIT
REC
1
PLAY
REW
PAUSE STOP
Menu Préc.
1/2
FF
SKIP
1. Presser la touche MENU puis la touche D / E pour sélectionner menu PICTURE.
2. Presser la touche G , puis la touche pour sélectionner l’option image
D
/ E
désirée. (Contraste , Brillance , Couleur , Netteté , Teinte ).
3. Presser la touche G , puis la touche F / G pour effectuer le réglage.
4. Presser ENTER pour sauvegarder.
P A G E 2 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode Sonore
- Sert à choisir les options manuellement.
CHANNEL
Mode sonore
G
Normal
Stade
Son stable
Ambiophonie
Équilibre
Aiguës
PICTURE
AUDIO
Nouvelles
Musique
Théâtre
Arrêt
0
50
50
TIMER
Graves
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu AUDIO.
2. Presser la touche G , puis la touche D / E pour sélectionner Mode sonore.
3. Presser la touche G , puis la touche D / E pour sélectionner l’option réglage de l’apparence
de l’image.
4. Presser ENTER pour sauvegarder.
• Normal Sert à remettre les niveaux sonores à l’état initial.
Stade Sert à accentuer les sons à fréquence élevée et les sont ambio-
phoniques avant pour recréer l’ambiance d’un stade.
Nouvelles Sert à augmenter les sons à fréquence élevée pour accentuer la
voix.
Musique Sert à augmenter les sons de haute et de basse fréquence afin d’ac-
centuer le son des instruments de musique.
Théâtre (Cinéma) Sert à accentuer les sons de haute et de basse fréquence
ainsi que les sons ambiophoniques avant afin de créer la sensation d’être au
CH RTN
ENTER
0
4
cinéma.
VOL
CH
MUTE
SURF
Arrêt Sert à régler les options sonores au menu Audio manuellement.
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
Son stable
CC
FREEZE
PIP INPUT
PIC SIZE
- Sert à parcourir les modifications au niveau sonore pendant les messages pub-
licitaires, puis à ajuster le son en fonction du niveau sonore du programme
télévisé en cours.
4
1/2/3
2/3
3
MENU
EXIT
REC
1
CHANNEL
PICTURE
AUDIO
Mode sonore
Son stable
Ambiophonie
Équilibre
PLAY
REW
PAUSE STOP
Marche
Arrêt
G
1/2/3
FF
SKIP
0
50
50
Aiguës
TIMER
Graves
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu AUDIO.
2. Presser la touche G , puis la touche D / E pour sélectionner Son stable.
3. Presser la touche G , puis la touche D / E pour sélectionner Marche ou Arrêt.
4. Presser ENTER pour sauvegarder.
P A G E 3 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambiophonie (Tonalité ambiophonique avant)
- Sert à augmenter les sons ambiophoniques avant afin de créer des sons plus ouverts et étendus.
CHANNEL
PICTURE
AUDIO
Mode sonore
Son stable
Ambiophonie
Équilibre
SRS TSXT
3D Echo system
Arrêt
G
0
Aiguës
50
50
TIMER
Graves
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu AUDIO.
2. Presser la touche G , puis la touche D / E pour sélectionner Ambiophonie.
3. Presser la touche G , puis la touche
pour sélectionner SRS TSXT ou 3D
D / E
Echo system.
4. Presser ENTER pour sauvegarder.
Contrôle sonore manuel
CH RTN
ENTER
0
4
4
-L’on peut régler les aiguës, basses et équilibre aux niveaux désirés.
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
CHANNEL
PICTURE
AUDIO
Mode sonore
Son stable
Ambiophonie
Équilibre
PIPCH- PIPCH+ SWAP
L
R
0
50
50
CC
FREEZE
PIP INPUT
Aiguës
PIC SIZE
TIMER
Graves
SPECIAL
SCREEN
PIP/DW
LOCK
1/2/3
2/3
3
MENU
EXIT
REC
Menu Préc.
1
PLAY
REW
PAUSE STOP
1/2/3
FF
SKIP
1. Presser la touche MENU puis la touche D / E pour sélectionner menu AUDIO.
2. Presser la touche G , puis la touche
pour sélectionner l’option son
/ E
D
désirée (Équilibre , Aiguës , Graves).
3. Presser la touche G , puis la touche F / G pour effectuer le réglage.
4. Presser ENTER pour sauvegarder.
• Brillance (Luminance) Sert à ajuster les niveaux de blanc et de lumière de l’im-
age.
• Couleur Sert à ajuster l’intensité des couleurs.
• Netteté (Définition) Sert à ajuster le degré de netteté des bords entre les
zones pâles et foncées de l’image. Plus le degré est faible, plus l’image est
adoucie.
P A G E 3 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Sélection des signaux
- Le téléviseur peut recevoir les programmes stéréo multi-audio et SAP (2 versions) accompagnant le pro-
gramme stéréo, si le diffuseur transmet un signal sonore additionnel en plus du signal d’origine.
- Mono: la langue primaire sort des haut-parleurs gauche et droit. Le mode est monophonique.
- Stéréo: la langue primaire sort des haut-parleurs gauche et droit. Le mode est stéréophonique.
- SAP: la langue seconde sort des haut-parleurs gauche et droit.
1. Presser l’a touche SAP de façon répétitive.
Mono
Stéréo
SAP
VOL
CH
MUTE
SURF
•Sélectionner le mode audio monophonique si le signal n’est pas clair
ou si les signaux de réception sont faibles.
• Les modes Stéréo et SAP sont disponibles seulement si compris dans
le signal de diffusion.
VIDEO
SAP
PI
PPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
MENU
EXIT
P A G E 3 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Réglage de la pendule
- Pour régler automatiquement l’heure par l’entremise du signal de diffusion PBS.
- Le signal de canal PBS comprend des informations sur l’heure appropriée.
- Régler la pendule manuellement, si l’heure en cours est incorrecte par la fonction
automatique.
CHANNEL
Pendule
G
Auto
Heure arrêt
Heure marche
Minuterie
Manuelle
Fuseau
PICTURE
AUDIO
Auto
TV 2
Arrêt auto
Chaîne PBS
TIMER
Heure avancée
Auto
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu TIMER.
2. Presser la touche G , puis la touche D / E pour sélectionner Pendule .
3. Presser la touche G , puis la touche D / E pour sélectionner Auto.
CH RTN
ENTER
0
7
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
4. Presser la touche G , puis la touche
pour sélectionner la zone horaire
/ E
D
dans la région. Les options sont: Auto, Nfld (New Foundland), Atlantic,
E.S.T.(Eastern Standard Time: heure de l’Est), C.S.T. (Central Standard Time:
heure centrale), M.S.T. (Mountain Standard Time: : heure des Rocheuses) et
P.S.T. (Pacific Standard Time: heure du Pacifique).
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
5. Presser la touche G , puis la touche D / E pour régler le Chaîne PBS.
7
1
1~6
2~6
6. Presser la touche G , puis la touche D / E pour régler le Heure avancée
Auto, Arrêt ou Marche, selon si la région observe le changement horaire.
7. Presser ENTER pour sauvegarder.
MENU
EXIT
REC
PLAY
REW
PAUSE STOP
1~6
FF
SKIP
P A G E 3 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Réglage de la minuterie marche-arrêt
- La fonction minuterie ne peut être actionnée que si l’heure a été réglée.
- La fonction minuterie arrêt est avant la fonction minuterie marche si elles sont réglées
ensemble.
- Le téléviseur doit être en mode attente pour que la heure marche fonctionne.
- À moins qu’une touche ne soit pressée dans un délai de 2 heures après avoir actionné la
fonction heure marche, l’appareil se met automatiquement hors circuit.
CHANNEL
PICTURE
AUDIO
Pendule
Heure arrêt
Heure marche
Minuterie
Arrêt
G
Marche
6
:
30 AM
17
Arrêt auto
TIMER
Volume
Ca.
TV
2
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu HEURE.
2. Presser la touche G , puis la touche D / E pour sélectionner Heure arrêt ou
Heure marche.
CH RTN
ENTER
0
7
VOL
CH
MUTE
SURF
3. Presser la touche G , puis la touche D / E pour sélectionner Défile.
• Pour annuler la fonction Heure marche / arrêt , sélectionner Pause.
SAP
PIP
VIDEO
4. Presser la touche G , puis la touche D / E pour sélectionner l’heure en cours.
PIPCH- PIPCH+ SWAP
5. Presser la touche G , puis la touche D / E pour sélectionner le minutes.
6. Pour seulement fonction Heure marche :
CC
FREEZE
PIP INPUT
PIC SIZE
Press the G button and then use D / E pour sélectionner le volume désiré.
Press the G button and then use D / E pour sélectionner le canal pour la mise
en circuit.
7
1
1~6
2~6
7. Presser ENTER pour sauvegarder.
MENU
EXIT
REC
PLAY
REW
PAUSE STOP
1~6
FF
SKIP
P A G E 3 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Réglage de la minuterie de mise en veille
- Cette fonction met automatiquement l’appareil hors circuit après une
durée réglée.
CHANNEL
Pendule
Heure arrêt
PICTURE
10 min
20 min
30 min
60 min
90 min
120 min
180 min
240 min
Arrêt
Heure marche
Minuterie
G
AUDIO
TIMER
Arrêt auto
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu TIMER.
2. Presser la touche G , puis la touche D / E pour sélectionner Minuterie.
3. Press the G button and then use D / E button to choose a preset turn off time.
4. Presser ENTER pour sauvegarder.
Arrêt Automatique
CH RTN
ENTER
0
4
VOL
CH
MUTE
SURF
- Cette fonction permet une mise hors circuit automatique du TV dans un délai
d’environ 10 minutes s’il n’ a pas de signal d’entée.
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
CHANNEL
PICTURE
AUDIO
Pendule
CC
FREEZE
PIP INPUT
PIC SIZE
Heure arrêt
Heure marche
Minuterie
4
1/2/3
2/3
Marche
Arrêt
Arrêt auto
G
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
MENU
EXIT
REC
1
PLAY
REW
PAUSE STOP
1/2/3
Menu Prev.
FF
SKIP
1. Presser la touche MENU puis la touche D / E pour sélectionner menu TIMER.
2. Presser la touche G , puis la touche D / E pour sélectionner Arrêt auto.
3. Presser la touche G , puis la touche D / E pour sélectionner Marche o Arrêt.
4. Presser ENTER pour sauvegarder.
P A G E 3 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Langue des menus à l’écran
Sélectionnez la langue des menus à l’écran : English, Español et Français.
CHANNEL
Langage(Language) G
Verrouillage
English
Español
Français
PICTURE
AUDIO
Sous-Titres
Sous-Titr/TX
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu SPECIAL.
2. Presser la touche G puis la touche D / E pour sélectionner Langage.
3. Presser la touche G button and then use D E pour sélectionner la langue désirée.
/
Depuis ce point, l’affichage à l’écran figurera dans la langue choisie.
4. Presser ENTER pour sauvegarder.
Verrouillage
CH RTN
ENTER
0
4
VOL
CH
MUTE
SURF
- Le téléviseur peut être programmé pour être utilisé uniquement avec la télé
commande.
- La fonction de verrouillage sert à désactiver les commandes du panneau avant
afin d’empêcher le visionnement non autorisé.
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
- Le téléviseur est programmé de manière à se rappeler la dernière option réglée
même si vous l’éteignez.
CC
FREEZE
PIP INPUT
PIC SIZE
4
1/2/3
2/3
CHANNEL
PICTURE
AUDIO
Langage(Language)
Verrouillage
Marche
Arrêt
G
Sous-Titres
MENU
EXIT
REC
Sous-Titr/TX
1
TIMER
PLAY
REW
PAUSE STOP
SPECIAL
SCREEN
PIP/DW
LOCK
1/2/3
FF
SKIP
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu SPECIAL.
2. Presser la touche G puis la touche D / E pour sélectionner Verrouillage.
3. Presser la touche G puis la touche D / E pour sélectionner Marche ou Arrêt.
4. Presser ENTER pour sauvegarder.
P A G E 3 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Réglage des sous-titres
Utilisation des sous-titres
La fonction de sous-titres est un procédé qui convertit la por-
tion audio d’un programme télé en mots écrits qui figurent à
l’écran. Ils permettent au spectateur de lire les dialogues à
l’écran.
2. Lecture d’une cassette usée, ou illégale.
3. Les signaux aléatoires et forts des voitures ou des avions
peu-vent causer une interférence avec le signal télé.
4. Le signal depuis l’antenne est faible.
5. Le programme n’est pas doté de sous-titres lorsqu’il a été
pro-duit, transmis ou enregistré.
Utilisation des sous-titres
Les sous-titres donnent les dialogues et les narrations des
pro-grammes télé. Pour les programmes préenregistrés, le dia-
logue peut être arrangé à l’avance en sous-titres. Il est possi-
ble de faire des sous-titres pour les programmes en direct en
utilisant un processus appelé sous-titres en temps réel, lequel
créé des sous-titres instantanément. Ceci est habituellement
fait par des professionnels qui utilisent un système de sténo-
graphie et un ordinateur pour traduire en anglais.
Utilisation de la touche CC (Sous-Titres / Texte)
1. Presser CC pour sélectionner sous-titres: Off ou On.
2. Presser ENTER pour sauvegarder.
Les sous-titres sont un sys-
tème efficace pour les malen-
tendants et peuvent aussi
aider à apprendre une langue.
• You can also adjust Captions in the PICTURE menu.
PIP
PIPCH- PIPCH+ SWAP
• L’illustration à droite montre
FOLLOW ME
un sous-titres.
CC
E
PIP INPUT
PIC S
Conseils
• Les programmes ne sont pas tous diffusés avec les signaux
de sous-titres.
• Les stations télé diffusent parfois quatre signaux de sous-
titres différents pour le même canal. En sélectionnantg CC
1
à CC 2, l’on peut choisir le signal désiré. CC 1 est
MENU
EXIT
habituellement le signal doté de sous-titres, tandis que
autre mode peut don-ner une démonstration ou de l’infor-
mation.
• Le téléviseur peut ne pas capter les signaux sous-titres dans
les cas suivants.
1. Mauvaises conditions de réception :
• ALLUMAGE:
L’image peut vaciller, avoir des points
noirs ou des traits horizontaux.
Habituellement causés par une inter-
férence des systèmes d’allumage des
voitures, les éclairages au néon, des
perceuses électriques et autres
appareils électriques.
• IMAGE-FANTÔME:
Elles sont créées lorsque le signal télé
se sépare et suit deux chemins ; un
étant un chemin direct et l’autre est
réfléchi sur les édifices élevés, les mon-
tagnes ou d’autres objets. Modifier la
direction ou la position de l’antenne
peut améliorer la réception.
• NEIGE:
Si le récepteur est situé dans des
endroits où le signal est faible, l’image
peut présen-ter de petits points. Il peut
être nécessaire d’installer une antenne
spéciale pour améliorer l’image.
P A G E 3 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Sélection du mode Sous-titre / Texte
Sélectionnez le mode d’affichage des sous-titres lorsque la
programmation le prend en charge.
Le mode Sous-titre affiche l’information à peu près n’im-
porte où à l’écran. Il sert généralement à afficher les
dialogues correspondant à la programmation.
Le mode Texte affiche généralement l’information au bas
de l’écran. Il sert à des services de données, non reliés à
la programmation.
CHANNEL
Langage(Language)
Verrouillage
PICTURE
CC1
Sous-Titres
CC2
Sous-Titr/TX
G
AUDIO
TIMER
CC3
CC4
Texte1
Texte2
Texte3
Texte4
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Presser la touche MENU puis la touche D / E pour sélectionner menu SPECIAL.
2. Presser la touche G puis la touche D / E pour sélectionner Sous-Titr /TX.
CH RTN
ENTER
3. Presser la touche G puis la touche D / E pour sélectionner caption: CC1 , CC2 , CC3
, CC4 , Texte1 , Texte2 , Texte3 ou Texte4 .
0
4
VOL
CH
MUTE
SURF
• Sous-titre
SAP
PIP
VIDEO
Terme utilisé pour les mots qui défilent à l'écran du téléviseur; habituellement
par partie son du programme, offerte comme service pour les malentendants.
PIPCH- PIPCH+ SWAP
• Texte
Terme utilisé pour les mots apparaissant dans un grand cadre noir et couvrant
la majorité de l'écran; habituellement des messages diffusés par le télédiffuseur.
CC
FREEZE
PIP INPUT
PIC SIZE
4
1
4. Presser ENTER pour sauvegarder.
1/2/3
2/3
MENU
EXIT
REC
PLAY
REW
PAUSE STOP
1/2/3
FF
SKIP
P A G E 3 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Réglage automatique
- Mode RVB (PC) seulenent.
- Pour régler automatiquement la position de l’image et élimine toute vibration de l’image.
- Si l’image n’est pas encore correcte, le téléviseur fonctionne correctement, mais doit être
encore réglé.
-
Config.auto ne sont pas actives en mode HDMI.
CHANNEL
Régler
Config. auto
G
Config. manuelle
Allongement
Cinema
PICTURE
AUDIO
NR
TIMER
Réajuste
SPECIAL
SCREEN
PIP/DW
LOCK
CH RTN
ENTER
0
VOL
CH
MUTE
SURF
SAP
PIP
VIDEO
Menu Préc.
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
1. Presser la touche MENU puis la touche D / E pour sélectionner menu SCREEN.
2. Presser la touche G puis la touche D / E pour sélectionner Config.auto.
3. Presser la touche G pour activer la configuration automatique.
1/2
2/3
• Lorsque Auto config. a terminé, OK figure à l’écran.
• La position de l’image est automatiquement réglée.
MENU
EXIT
REC
1/2
1
PLAY
REW
PAUSE STOP
4. Si l’image doit être réglée après le réglage automatique en RVB (PC), l’on peut régler
la Config.manuelle.
FF
SKIP
Configuration manuelle
- Si l’image n’est pas claire après le réglage automatique et surtout si les carac-tères vibrent, régler
la Phase manuellement.
- H position or V position function only work for RVB-DTV/HDMI-DTV/HDMI-PC mode.
- To correct the screen size, adjust H Size, V Size, H Position, V Position.
CH RTN
ENTER
0
5
VOL
CH
MUTE
SURF
CHANNEL
PICTURE
AUDIO
Config. auto
Config. manuelle
Allongement
Cinema
SAP
PIP
VIDEO
G
Phase
0
0
0
0
0
H Size
PIPCH- PIPCH+ SWAP
V Size
NR
TIMER
H Position
V Position
Réajuste
CC
FREEZE
PIP INPUT
PIC SIZE
SPECIAL
SCREEN
PIP/DW
LOCK
1/2/3
2/3/4
5
4
MENU
EXIT
REC
Menu Préc.
1/2/3
1
PLAY
REW
PAUSE STOP
FF
SKIP
1. Presser la touche MENU puis la touche D / E pour sélectionner menu SCREEN.
2. Presser la touche G puis la touche D / E pour sélectionner Config.manuelle.
3. Presser la touche G puis la touche D / E pour sélectionner Phase.
4. Presser la touche F / G pour effectuer le réglage.
• La gamme de Phase varie de 0 à 63.
5. Presser ENTER pour sauvegarder.
P A G E 3 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Allongement
- Si 4 :3 demeure à l’écran pendant une longue période, une image fixe peut demeurer.
- Régler chaque ratio aspect pour les sources TV, Video, ColorStream HD 480i.
- Utiliser 4:3 ou 16:9 pour d’autres sources RVB-PC et HDMI-PC.
- Horizon n’est pas disponible pour ColorStream HD 1-2 (480p,720p,1080i), DTV
(480p,720p,1080i).
1. Presser la touche PIC SIZE de façon répétitive pour sélectionner le format d’image
désiré. L’on peut aussi régle PIC SIZE au menu ECRAN.
• 4:3
Pour choisir lorsque l’on veut voir une image dans son rapport de 4:3, avec des bar-
res figurant de chaque côté.
PIP
PIPCH- PIPCH+ SWAP
• 16:9
Pour choisir lorsque l’on veut régler l’image horizontalement, en proportion linéaire
pour remplir tout l’écran.
FREEZE
PIP INPUT
P
I
C
SI
ZEC
• Theater wide 1
lorsque vous désirez ajuster l’image en sens non linéaire. L’image en est
plus élargie aux extrémités de gauche et de droite afin de créer une vue
spectaculaire.
• Theater wide 2
- lorsque vous désirez visionner l’image sans altérations. Les parties
supérieure et inférieure de l’écran en seront cependant rognées.
MENU
EXIT
Réglage du mode Cinéma
- Réglez téléviseur de manière à obtenir une image optimale pendant le visionnement d’un film.
- En mode Cinema «étirement 3-2 » (1) ou en mode Cinéma « correction », le téléviseur ajuste
les 24 cadres du film à 30 cadres en vidéo aux fins d’affichage (fonction offerte uniquement en
mode Composant 480i).
CHANNEL
PICTURE
AUDIO
Config. auto
Config. manuelle
Allongement
Cinema
G
Marche
Arrêt
CH RTN
ENTER
0
NR
4
4
VOL
CH
TIMER
MUTE
SURF
Réajuste
SPECIAL
SCREEN
PIP/DW
LOCK
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
Menu Préc.
PIC SIZE
1/2/3
2/3
1. Presser la touche MENU puis la touche D / E pour sélectionner menu SCREEN.
MENU
EXIT
REC
2. Presser la touche G puis la touche D / E pour sélectionner Cinema.
1/2/3
1
3. Presser la touche G puis la touche D / E pour sélectionner Marche ou Arrêt.
PLAY
REW
PAUSE STOP
4. Presser ENTER pour sauvegarder.
FF
SKIP
• Cette caractéristique fonctionne seulement en mode Vidéo, S-Vidéo
et Colorstream HD 480i.
P A G E 4 0
Download from Www.Somanuals.com. All Manuals Search And Download.
NR
- You can select 3D NR or MPEG NR to reduce the picture noise which may appear
on the screen while watching the TV.
CHANNEL
PICTURE
AUDIO
Config. auto
Config. manuelle
Allongement
Cinema
G
3D NR
0
0
NR
TIMER
Réajuste
MPGE NR
CH RTN
ENTER
0
5
5
VOL
CH
MUTE
SURF
SPECIAL
SCREEN
PIP/DW
LOCK
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
Menu Préc.
CC
FREEZE
PIP INPUT
PIC SIZE
1/2/3
2/3/4
1. Presser la touche MENU puis la touche D / E pour sélectionner menu SCREEN.
2. Presser la touche G puis la touche D / E pour sélectionner NR.
4
MENU
EXIT
REC
1/2/3
1
3. Press the G button and then use D / E button to select 3D NR or MPEG NR.
PLAY
REW
PAUSE STOP
4. Presser la touche F / G pour effectuer le réglage.
FF
SKIP
4. Presser ENTER pour sauvegarder.
Initialisation (Faire la remise aux valeurs en usine)
- La remise est unique pour chaque fonction: configuration manuelle, position, zoom
séparé, position PIP, PIP Transparency et image secondaire pour double fenêtre
- Pour initialiser la valeur réglée.
CH RTN
ENTER
0
VOL
CH
MUTE
SURF
CHANNEL
PICTURE
AUDIO
Luminosite
Config. manuelle
Allongement
Cinema
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
NR
TIMER
Réajuste
G
Régler
CC
FREEZE
PIP INPUT
SPECIAL
SCREEN
PIP/DW
LOCK
PIC SIZE
1/2
2/3
Menu Préc.
MENU
EXIT
REC
1/2
1
PLAY
REW
PAUSE STOP
FF
SKIP
1. Presser la touche MENU puis la touche D / E pour sélectionner menu SCREEN.
2. Presser la touche G puis la touche D / E pour sélectionner Réajuste.
3. Presser la touche G.
•L’on peut initialiser Config. manuelle, Position, Zoom séparé, position PIP et la dimen-
sion de l’image secondaire pour l’image jumelée.
P A G E 4 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Réglage du verrouillage parental
La sélection-parent peut être utilisée pour verrouiller des canaux spécifiques, des cotes et autres sources de visionnement.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting sta-
tion. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the
categories chosen to be blocked. It is also possible to block all program viewing for a time period. To use this function,
the following must be done :
1. Set ratings and categories to be blocked.
2. Specify a password
3. Enable the lock
V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by
TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the
Movie Rating System (MPAA) only.
Ratings for Movies previously shown in theaters:
Movie Ratings :
• Unblocked (Permits all programs)
• G & above (General audience)
• PG & above (Parental guidance suggested)s
• PG-13 & above (Parents strongly cautioned)
• R & above (Restricted)
• NC-17 & above (No one 17 and under admitted)
• X (Adult only)
If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
Ratings for Television programs including made-for-TV movies :
General TV Ratings:
• Unblocked
• TV-G & above (general audience) (individual categories do not apply)
• TV-PG & aboves (parental guidance suggested)
• TV-14 & above (14 years and older)
• TV-MA (mature audience)
Children TV Ratings:
• Unblocked
• TV-Y & above (youth) (individual content categories do not apply)
• TV-Y7 (youth, 7 years and up)
Content Categories:
• Dialog - sexual dialogue (applies to TV-PG & above, TV-14)
• Language - adult language (applies to TV-PG & above, TV-14 & above, TV-MA)
• Sex scenes - sexual situations (applies to TV-PG & above, TV-14 & above, TV-MA)
• Violence (applies to TV-PG & above, TV-14 & above, TV-MA)
• F Violence - fantasy violence (applies only to TV-Y7)
Aux. Block
• Video 1, 2/ Front Video (Blocked, Unblocked)
• ColorStream HD1, 2 (Blocked, Unblocked)
• RVB, HDMI (Blocked, Unblocked)
For Canadian English/French language rating system:
Canadian English language rating system:
• C & above (Children)
• C8+ (8 years and older)
• G & above (General programming. Suitable for all audiences.)
• PG & above (Parental guidance suggested)
• 14+ (Viewer 14 years and older)
• 18+ (Adult programming)
Canadian French language rating system:
• G & above (General)
• 8 ans+ (8 years and older)
• 13 ans+ (13 years and older)
• 16 ans+ (16 years and older)
• 18 ans+ (Adults only)
P A G E 4 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Verrouillage parental
- Permet de régler les paramètres pour verrouiller des canaux spécifiques, des cotes ou
autres sources.
- Un mot de passe est requis pour accéder à ce menu si le système de verrouillage est
activé.
CHANNEL
PICTURE
AUDIO
marche
Arrêt
Blocage M/A
Mot de Passe
MPAA
G
Âge bloc
Cont. bloc
Aux. bloc
Canadian
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Menu Préc.
1. Press the MENU button and then use D / E button to select the LOCK menu.
Then, press the G button
• If Lock is already set, enter the password as requested.
• The TV is set up with the initial password “0-0-0-0”.
2. Use the D / E button to choose from the following LOCK Menu options. Once
the option is selected, change the settings to your preference.
• Lock on/off: Activates or disables the blocking scheme you set up pre-
viously.
• Set Password: Change the password by inputting a new password twice.
• MPAA (Movie Rating): Blocks movies according to the movie ratings
limits specified, so children cannot view certain movies. You can set
the ratings limit by blocking out all the movies with the ratings above
a specified level. Keep in mind that the movie ratings limit only applies
to movies shown on TV, not TV programs, such as soap operas.
• Age block
CH RTN
ENTER
0
3
VOL
CH
MUTE
SURF
Children: Prevents children from watching certain children's TV pro-
grams, according to the ratings limit set. The children rating does not
apply to other TV programs. Unless you block certain TV programs
intended for mature audiences in the TV Rating - sub menu, your chil-
dren can view those programs.
SAP
PIP
VIDEO
PIPCH- PIPCH+ SWAP
General: Based on the ratings, blocks certain TV programs that you
and your family do not want to view.
CC
FREEZE
PIP INPUT
PIC SIZE
• Content block: According to the contents (Dialog, Language, Sex
scenes, Violence, F Violence), you can set the ratings limit.
• Aux. Block: Enables you to select a source to block from the external
source devices you have hooked up.
1/2
1
3
• Canadian
MENU
EXIT
REC
English: To prevent the children from looking at certain tele programs
for the programs intended for the children. This dimension does not
apply to the other tele programs. Unless locking certain programs
intended for the older spectators with the general menu; tele dimen-
sion, the children can look at these emissions.
1
PLAY
REW
PAUSE STOP
1/2
FF
SKIP
French: To lock certain tele programs which one does not want to look
according to the dimensions.
3. Presser ENTER pour sauvegarder.
Remarque
• Si l’on oublie le mot de passe, entrer 7 – 7 – 7 – 7 sur la télécommande.
- PIP/DW, DW or PIP function doesn’t work if the Key Lock System is turned
on.
P A G E 4 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Exploitation en mode image dans l’image (I.D.I.) et Images doubles
Le mode I.D.I. (aussi nommée PIP) permet de visionner en même temps deux sources d’images distinctes à l’écran, dont l’une plus
grande que l’autre. L’image le plus petite est insérée en cartouche en mode I.D.I.
Le mode Images doubles (aussi nommé Twin) divise l’écran en deux de manière à ce que vous puissiez visionner deus images à la
fois. Chacune des deux sources se partage l’écran.
Watching PIP
Pour afficher l’image en mode I.D.I., appuyez sur la touche PIP.
Chaque fois que vous appuyez sur PIP, les options en sont modifiées tel qu’illustré ci-après :
Mode PIP
DW1
DW2
Mode POP
Sélection des sources I.D.I. et doubles
Sert à passer à la source I.D.I. pour que vous puissiez
regarder la télé ou la télé par le câble, utiliser votre mag-
nétoscope et tout autre appareil raccordé au téléviseur.
Using the menu
Press the MENU button on the remote control,
then use the D / E button to select the
PIP/DW menu.
Ant/Câble
Vidéo1
Entrée
CHANNEL
PICTURE
AUDIO
1
DW
Vidéo2
PIP
Vidéo d’avant
Colorstream HD1
Colorstream HD2
RVB
PIP Input
Win.size
Win.position
PIP Transparency
Press ENTER or the G arrow button to access
the PIP/DW menu.
TIMER
2
SPECIAL
SCREEN
PIP/DW
LOCK
HDMI
Use the D / E to select the Input option.
3
4
Appuyez sur ENTER ou sur la flèche vers la
DROITE pour accéder au menu Entrée, puis sur
les flèches vers le HAUT et le BAS pour
choisir la source. Vous disposez des options
suivantes : Ant/Câble, Vidéo1,, Vidéo 2, Vidéo
d'Avant , Colorstream HD1, Colorstream HD2,
RVB, HDMI.
Menu Prev.
Do not display a fixed image on the screen for long
periods of time. Doing so may cause image burn-in.
W
W
Le mode I.D.I. n’offre pas toutes les sources.
Appuyez sur EXIT pour sauvegarder les
5
réglages et revenir à l’écoute de la télé ou sur
la flèche vers la GAUCHE pour sauvegarder les
réglages et revenir au menu précédent.
VOL
CH
MUTE
SAP
SURF
Utilisation de la touche PIP INPUT de la télécommande
VIDEO
Utiliser la touche Entrée I.D.I. pour choisir la source
PIP
PIPCH- PIPCH+ SWAP
1
d’entrée de l’image en mode I.D.I. Chaque fois que
vous appuyez sur la touche Entrée, vous basculez entre
Ant/Câble, Vidéo1, Vidéo2, Vidéo d'Avant, Colorstream
HD1, Colorstream HD2, RVB, HDMI.
PIP INPUT
FRE
CC
PIC SIZE
P A G E 4 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Exploitation en mode image dans l'image (I.D.I.) et Images doubles
Sélection de canaux en mode I.D.I. et Images doubles
Appuyez sur la touche PIP de la télécommande pour sélectionner le mode Incrustation d’image
1
ou Images doubles. Sélectionnez la source Ant/Cable à l’aide de la touche PIP INPUT (Entrée
I.D.I.).
Pour sélectionner le canal correspondant à l'I.D.I., utilisez la touche PIPCH-/PIPCH+.
2
Swapping Pictures
Appuyez sur la touche SWAP.
Chaque fois que vous appuyez sur la touche SWAP, vous invertissez l’image principale et l’image dans l'image.
Image princi-
Image dans
Image princi-
pale l'image
Image dans
l'image
pale l'image
l'image
Moving the Sub Picture (PIP mode only)
In the PIP/DW menu, select the Win.position and then each press of the UP/DOWN/LEFT/RIGHT arrow buttons will
move the sub picture to a different position on the screen.
Syntoniseur à fenêtres multiples (POP)
Le mode POP (image hors image) sert à effectuer la
recherche de tous les canaux programmés, une à la fois, par
l’entremise des trois images superposées à l’écran même
quand l’écran principal demeure syntoniser au même canal.
Pour activer le mode POP (image hors
1
image), appuyez sur la touche PIP de la
télécommande pendant que les images
superposées sont affichées à l’écran. Les
images correspondant à tous les canaux pro-
grammés sont parcourus et les trois écrans
POP sont affichés, tel qu’illustré ci-contre.
• Appuyez sur SWAP pour agrandir la
chaîne parcourue à l’écran POP pour la
voir à l’écran principal. (On peut utiliser
cette fonction avec la source d’entrée
Ant/Câble dans le cas des images princi-
pales et des images dans l'image.
Appuyez sur la touche EXIT pour quitter le
mode POP.
2
Run Auto Program channel search before using POP mode.
W
P A G E 4 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remplacement de l'ampoule
• Pour obtenir une ampoule de rechange :
• Au Canada, communiquez avec un distributeur de pièces Toshiba en consultant le www.toshiba.ca. Cliquez
sur « Produits grand public ». Dans la fenêtre contextuelle de droite, intitulée « Recherche concession-
naire/Soutien et produits », sélectionnez « Recherche de concessionnaire et soutien ». Sous la rubrique «
Produits grand public », cochez « Téléviseurs », puis choisissez la méthode de recherche désirée (par
province, par ville ou par code postal). Appuyez sur Submit (Soumettre).
Utilisez uniquement l'ampoule de rechange portant le numéro de modèle D85-LMP. L’utilisation de toute autre
ampoule peut endommager le téléviseur et / ou l'ampoule.
ATTENTION : Remplacez toujours l'ampoule par une ampoule
du même modèle, soit le.[D85-LMP]
Conditions exigeant le remplacement de l'ampoule :
• L’image devient progressivement plus foncée et se détériore.
• Suivre les directives de remplacement de l'ampoule présentées ci-dessous :
1. Éteignez le téléviseur et débranchez le cordon d’alimentation.
2. ARRÊTEZ! Attentez que l'ampoule refroidisse pendant au moins une heure avant de la remplacer.
ATTENTION : SURFACE BRÛLANTE!
Après usage, la température de cette ampoule dépasse les
200 °C (392 °F). Si vous touchez à l'ampoule avant qu’elle
ne se refroidisse, vous pourriez subir de graves brûlures.
ATTENTEZ QUE L'AMPOULE REFROIDISSE PENDANT AU MOINS
UNE (1) HEURE AVANT DE LA REMPLACER.
3. Enlevez les deux vis restantes de l’écran protecteur de l'ampoule à l’aide d’un tournevis à tête cruciforme
(Phillips). Enlevez ensuite entièrement la porte du compartiment à ampoule du téléviseur.
ATTENTION : RISQUES DE CHOCS ÉLECTRIQUES!
La porte du module d'ampoule est dotée d’un dispositif de ver-
rouillage afin de réduire le risque de choc et d’exposition
excessive aux rayons ultraviolets. N’allez jamais à l’encontre du
but recherché et ne tentez jamais d’effectuer de réparations sans enlever entièrement la
porte du module d'ampoule. Tout défaut de tenir compte de cette MISE EN GARDE pour-
rait engendrer la mort ou de graves blessures.
4. Enlevez les deux vis restantes du module d'ampoule à l’aide d’un tournevis à tête cruciforme.
5. Soulevez la poignée à fil fixe de l'ampoule.
P A G E 4 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remplacement de l'ampoule (suite)
6. Tirez lentement sur la poignée, puis enlevez le module de l'ampoule.
7. Introduire lentement la nouvelle ampoule au bon endroit. Assurez-vous de bien l’y insérer.
Remarque:
• Ne jamais soumettre l'ampoule à des chocs excessifs
• Ne jamais toucher le verre de l'ampoule ni le salir. Le cas échéant, la qualité de l’image et la durée
utile de l'ampoule pourraient en être affectées. Voir « Nettoyage du verre de l'ampoule » ci-après.
Nettoyage du verre de l'ampoule
S’il vous arrivait de toucher ou de salir accidentellement le verre de l'ampoule, essuyez-le à
l’aide d’un chiffon non pelucheux (un chiffon servant au nettoyage des lunettes ou d’un
objectif de caméra, par ex.).
ATTENTION : NE JAMAIS nettoyer une lampe chaude avec du liquide
inflammable ou un produit de nettoyage en aérosol. Plusieurs produits
de nettoyage ordinaires (tels les produits pour vitres) contiennent des
produits chimiques pouvant brûler à certaines températures. Si vous ne
laissez pas refroidir l'ampoule pendant au moins une (1) heure, de tels
produits pourraient prendre feu.
8. Serrez les vis enlevées à l’étape 3 à l’aide d’un tournevis à tête cruciforme (n’utilisez pas de tournevis
électrique).
9. Remettez l’écran protecteur du module de l'ampoule en place, puis serrez-en les vis.
REMARQUE : Assurez-vous d’installer solidement l'ampoule et la porte du
compartiment à ampoule, sans quoi le téléviseur pourrait ne pas se mettre
sous tension.
10. Branchez de nouveau le cordon d’alimentation, puis mettez le téléviseur sous tension. Après la période
initiale de réchauffement (l’obtention d’une luminance complète peut exiger plusieurs secondes), le
téléviseur devrait fonctionner normalement. En présence des conditions suivantes, éteignez le téléviseur,
débranchez le cordon d’alimentation et répétez les étapes 1 à 9 afin d’assurer que l'ampoule et la porte
du module de l' ampoule sont installés correctement :
•
•
•
•
Le témoin de l'ampoule clignote en vert.
Absence d’image.
Image foncée.
Le téléviseur ne se met pas sous tension.
Si le problème persiste après avoir recommencé les étapes 1 à 10 :
• Au Canada, repérez le centre de service autorisé Toshiba le plus près de chez vous en consultant le site Web
au www.toshiba.ca et en cliquant ensuite sur « Produits grand public » tel que mentionné à la page 46.
P A G E 4 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remplacement de l'ampoule (suite)
Pour disposer de l'ampoule
• Posez l'ampoule usée dans l’emballage de l'ampoule neuve.
• Tenez l'ampoule usée loin de la portée des enfants et des animaux.
ATTENTION: Manipulez toujours l'ampoule avec soin.
L'ampoule de ce téléviseur a été conçue pour être remplacée par le consom-
mateur en toute sécurité; par ailleurs, si l'ampoule était soumise intention-
nellement ou accidentellement à un traitement abusif (pendant le service
ou par des enfants ou des animaux), elle pourrait alors se briser. Ses bords coupants et
points de pincement pourraient causer des blessures.
• Disposez de l'ampoule usée selon une méthode approuvée dans votre région.
REMARQUE: Cette ampoule contient du mercure. Pour des raisons de respect
de l’environnement, il se peut que certaines lois concertant l’élimination du
mercure soient en place. Pour obtenir de l’information sur l’élimination ou le
recyclage du mercure, veuillez consulter les autorités de votre localité ou la
Electronics Industries Alliance (www.eiae.org).
P A G E 4 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmation de la télécommande
La télécommande du téléviseur est une télécom-
mande multimarque ou universelle pouvant être
programmée de manière à opérer la plupart des
appareils télécommandables d’autres fabricants.
Remarque : Même si cette télécommande prend
en charge la plupart des marques de magnéto-
scopes, de lecteurs DVD et module de raccorde-
ment par satellite, certains équipements peu-
vent ne pas être compatibles avec elle.
VCR CABLE DVD
TV
SAT
MODE
LIGHT
POWER
Faites l’essai de la télécommande.
1
Pour savoir si la télécommande peut faire
2
4
3
fonctionner un appareil sans programmation
(un magnétoscope, par ex.), mettez l’appareil
sous tension, puis appuyez sur la touche cor-
respondante (VCR) de la télécommande tout
en pointant celle-ci en direction de l’appareil.
Essayez les touches POWER (Mise sous ten-
TV/VIDEO
C/S HD1
FRONT
HDMI
RGB
C/S HD2
1
4
2
5
8
0
3
6
9
sion) et CH
(Parcours des canaux) pour
D
/ E
voir si l’appareil réagit correctement. Si ce
n’est pas le cas, la télécommande doit être
programmée pour faire fonctionner l’appareil.
7
CH RTN
ENTER
Mettez l’appareil à programmer sous ten-
sion. Appuyez ensuite sur la touche corre-
spondante de la télécommande.
VOL
CH
MUTE
SURF
2
3
3
SAP
VIDEO
4
5
Appuyez en même temps sur les touches
POWER et MUTE (Assourdissement). La télé-
commande est maintenant prête pour la pro-
grammation du code correspondant à l’appareil.
PIP
PIPCH- PIPCH+ SWAP
CC
FREEZE
PIP INPUT
PIC SIZE
Il existe deux moyens de trouver le code
correspondant à l’appareil.
4
A. Appuyez plusieurs fois sur les touches
CH
pour voir changer les codes un à la
D / E
fois. Appuyez sur la touche POWER après
chaque changement de code. Une fois le
bon code repéré, l’appareil s’éteindra.
MENU
EXIT
REC
PLAY
REW
PAUSE STOP
B. Entrez un code à l’aide des touches
numériques de la télécommande. Les
pages suivantes présentent les codes cor-
respondant aux divers appareils. Une fois
le bon code repéré, l’appareil s’éteindra.
FF
SKIP
Appuyez sur EXIT pour sauvegarder le pro-
gramme.
5
6
Essayez les fonctions de la télécommande
pour voir si l’appareil réagit correctement.
Si ce n’est pas le cas, répétez les manœu-
vres à partir de l’étape 2.
P A G E 4 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Codes de programmation (TV)
TV
Marque
A MARK
ADMIRAL
AKAI
AMPRO
AMSTRAD
ANAM
Codes
112 143
072 081 161
006 146
073 167
Marque
GOLDSTAR
Codes
Marque
Codes
Marque
Sharp
Codes
004 102 106
110 112 113
116 119 122
127 137 143
004 116
004 006 009
010 011 012
023 041 075
143 158 163
166
019 024 040
056 130 132
134
043
043
043
019 081
034 056 080
092 164
003 004 006
024 043 056
059 060 063
064 127 143
164
003 004 005
006 038 059
070 093 143
160 164
006 018 023
025 027 116
135 176
004 143
144 160 161
165 167
004 014 019
022 028 029
081 143 170
175
088
072
041 070 079
085 126 139
147 185
003 004 028
043 116
112
NIKEI
ONKING
ONWA
OPTONICA
PANASONIC
052
HALL MARK
HITACHI
SIEMENS
SIGNATURE
SONY
043 054 056
080 104 108
112 115 118
121 131
004 006 058
112
088
002 003 004
006
058
043
002 003 004
006 043 101
103 143
043
004
039 043 050
051
143
043 054
043 143
004 006 101
116 143
043
004 016 017
043 044 055
071 076 103
107 111 114
117 120 123
125 127 128
136 143
004 116 143
043
062
024 077 143
004 005 006
028 043 047
048 050 051
096 116 143
151 153 154
155
007 057
028 043
043
004 006 008
009 034 056
073 074 091
116 130 144
155 160 161
165
AOC
PHILCO
SOUNDESIGN
INFINITY
INKEL
JBL
164
129
164
BLAUPUNKT
CANDLE
SPECTRICON
SSS
SUPRE MACY
SYLVANIA
004 043
002
JCPENNY
004 006 008
009 024 030
065 101 143
156 160
013
034 038 070
083 145
043
006 070
002 059
143
006 043 143
154
CAPEHART
CETRONIC
CITIZEN
PHILIPS
PIONEER
003 004 006
044 059 060
063 064 116
127 140 160
164
JENSEN
JVC
CLASSIC
CONCERTO
CONTEC
TANDY
TATUNG
TECHNICS
TECHWOOD
TEKNIKA
081
KEC
056 062
034 080 084
004
002 003 004
006 024 028
031 043 072
077 101 103
143
KENWOOD
KLOSS
KMC
PORTLAND
PROSCAN
CORONADO
CRAIG
CROWN
KTV
PROTON
004 058 116
131 143 171
173
CURTIS MATHES
LG
255
072
072
004
LODGENET
LOGIK
LUXMAN
LXI
QUASAR
RADIO SHACK
034 056 092
019 043 047
116 127 143
004 006 023
024 056 065
074 144 152
156 160 161
165
007 019 043
047
186
168 169
004 006 058
116
004 050 089
101 105 113
116 127 133
137 143 160
007 020 021
033 039 053
057 082 166
004 028 043
048 116 143
004 007 015
028 030 057
082 094 101
116 143 160
CXC
DAEWOO
TELEFUNKEN
037 046 086
087
072
007 015 052
081 160 164
166
003 004 006
022 059 060
061 063 064
127 143 160
164
006 077 164
164
004 007 072
116
RCA
TELERENT
TERA
TMK
172
004 116
007 015 030
040 051 062
101 138
143
008 009
146
174
004 116
004 008 009
019 028 060
061 063 064
072 074 116
143 164
004 006
004 116
043
MAGNAVOX
TOSHIBA
REALISTIC
DAYTRON
DYNASTY
DYNATECH
ELECTROHOME
EMERSON
TOTEVISION
UNIVERSAL
VIDEO CONCEPTS
VIDIKRON
VIDTECH
ROCTEC
RUNCO
SAMPO
MARANTZ
MATSUI
MEMOREX
SAMSUNG
WARDS
METZ
MGA
088
004 006 024
028 042 049
077 116
088
004 006 024
028 040 042
109 116 124
146
004 006 062
101
015 025
006 007 016
SANYO
FISHER
FUNAI
FUTURETECH
GE
MINERVA
MITSUBISHI
YAMAHA
YORK
YUPITERU
ZENITH
SCOTT
SEARS
001 072 073
095 103 157
112
MTC
ZONDA
NAD
NEC
P A G E 5 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Codes de programmation (Magnétoscopes)
Magnétoscopes
Marque
AIWA
AKAI
Codes
034
Marque
Codes
055 060 130
150 152
014 034 039
043 047 048
255
Marque
Codes
Marque
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
Codes
040 101
040
012
048
034 040 041
062 063 107
109 140 144
145 147
003 008 010
014 031 033
034 040 053
054 101
016 043 046
124 125 146
072
031 033 103
012 023 039
043
035 037 129
028 031 033
108
003 040 135
031 033 041
005 007 010
064 065 108
110 111 112
116 117 119
108
KENWOOD
AMPRO
ANAM
AUDIO DYNAMICS
LG
LLOYD
LXI
REALISTIC
012 034 046
040
034
003 009 013
014 017 034
101 106
003 013 017
024 031 033
034 040 053
054 131
012 034 039
043
001 034 048
056 058 072
080 101
BROKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
RICO
058
148
014
MAGIN
MAGNAVOX
040
RUNCO
SALORA
SAMSUNG
031 033 034
041 067 068
012 031 033
067 069
101
027 030
YAMAHA
ZENITH
032 040 102
104 105 107
109 112 113
115 120 122
125
022 043 048
135
003 007 010
014 102 134
017 037 112
129 131
003 008 009
010 013 014
017 020 031
042 073 081
101
MARANTZ
MARTA
MATSUI
MEI
DAYTRON
DBX
031 033
SANSUI
SANYO
SCOTT
012 023 039
043
034 053
MEMOREX
003 010 014
031 033 034
053 072 101
102 134 139
045 046 059
013 020
013 020 045
046 049 051
059 061 151
034 040
DYNATECH
ELECTROHOME
EMERSON
059
006 017 025
027 029 031
034 035 036
037 046 101
129 131 138
153
MGA
MINOLTA
MITSUBISHI
SEARS
MTC
FISHER
003 008 009
010
034
031 033 063
072 107 109
144 147
MULTITECH
NEC
024 034
012 023 039
043 048
043
053 054
066 070 074
083 133 140
145
013 020 031
033 063
SHARP
SHINTOM
SONY
031 054 149
024
003 009 031
052 056 057
058 076 077
078 149
034
013
031 033 034
059 067
FUNAI
GE
NORDMENDE
OPTONICA
PANASONIC
GO VIDEO
GOLDSTAR
132 136
SOUNDESIGN
STS
SYLVANIA
012 013 020
101 106 114
123
PENTAX
HARMAN KARDON
HITACHI
012 045
PHILCO
PHILIPS
031 034 067
031 033 034
054 067 071
101
101
013 021 048
108
072
011 014
033 066 075
145
013 020 033
SYMPHONIC
TANDY
TATUNG
TEAC
TECHNICS
TEKNIKA
034
010 034
039 043
034 039 043
031 033 070
019 031 033
034 101
034
006
004 018 026
034 043 063
137 150
031 033
031 033
012 013 015
033 040 066
101
043
012 031 033
043 048 050
INSTANTREPLAY
JCL
JCPENNY
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
THOMAS
TMK
TOSHIBA
JENSEN
JVC
008 013 042
047 059 082
112 131
RCA
P A G E 5 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Codes de programmation (Télévision par satellite / lecteurs DVD)
Télévision par satellite
Marque
ALPHASTAR DSR
AMPLICA
BIRDVIEW
BSR
Codes
123
050
051 126 129
053
Marque
Codes
027 133 134
Marque
PERSONAL CABLE
PHILIPS
Codes
117
071
Marque
Codes
115
128 146
001 081 082
083 084 091
120
VIEWSTAR
WINEGARD
ZENITH
GENERAL INSTRUMENT 003 004 016
029 031 059
101
139 140
033 037 039
051 057 104
068
PICO
105
PRESIDENT
PRIMESTAR
PROSAT
RCA
REALISTIC
SAMSUNG
019 102
030 110 111
072
066 106
043 074
123
CAPETRONICS
CHANNEL MASTER
053
HITACHI
HOUSTON TRACKER
013 014 015
018 036 055
008 009 012
077
CHAPARRAL
HUGHES
HYTEK
053
CITOH
CURTIS MATHES
DRAKE
054
JANIEL
JERROLD
KATHREIN
LEGEND
LG
LUTRON
LUXOR
MACOM
060 147
061
108
057
255
SATELLITE SERVICE CO 028 035 047
057 085
SCIENTIFIC ATLANTA 032 138
050 145
005 006 007
010 011 052
112 116 141
024 046 056
076
038 040 057
058 093 094
095 096 097
098 099 100
122
SONY
103
STARCAST
SUPER GUIDE
TEECOM
041
DX ANTENNA
ECHOSTAR
132
020 124 125
023 026 075
087 088 090
107 130 137
002 127
016 025 042
043 044 045
048 049 078
079 080 086
101 135 136
062 144
010 059 063
064 065
057
028 124 125
069 070
MEMOREX
NEXTWAVE
NORSAT
PACE SKY SATELLITE 143
PANASONIC
PANSAT
TOSHIBA
UNIDEN
ELECTRO HOME
EUROPLUS
FUJITSU
089
114
017 021 022
060 142
121
Lecteurs DVD
Marque
APEX DIGITAL
DENON
Codes
022
020 014
005 006
010 016 025
027
Marque
Codes
025
013
024
002
023
008 017
003 009
Marque
PHILIPS
PIONEER
PROCEED
PROSCAN
RCA
Codes
013
004 026
021
005 006
005 006
011 015
007
Marque
Codes
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005 006
019 008
009 018
010 016 025
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
ONKYO
PANASONIC
GE
GOLDSTAR
HARMAN KARDON
JVC
012
001 010 016
SAMSUNG
SONY
LG
P A G E 5 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Codes de programmation (Boîtes à câbles)
Télévision par câble
Marque
ABC
Codes
Marque
Codes
Marque
REGAL
REGENCY
REMBRANT
RK
Codes
049 050
057
025
091
Marque
Codes
032 035
012 015 018
086 087 088
089
003 004 039
042 046 052
053
014
005 007 014
024
026
092
007
007
065 090
080 081
019 030
023
020 030 040
057 062 066
032
072
008 022 025
054
052 074
030
049 050 055
052 055
070 077
002 003 004
008 009 010
052 069 074
255
037
033
010 012 064
079
001
028 032
015 028 038
071 073
016 031 037
053
044 047
001
006 012 013
020 065 085
090
034 051 052
063 076
016
VIEWSTAR
LG
ANTRONIK
ARCHER
M-NET
MACOM
MAGNAVOX
SAMSUNG
SCIENTIFIC ATLANTA 003 011 041
030 068
ZENITH
001 060 093
CABLE STAR
CENTURION
CENTURY
CITIZEN
COLOUR VOICE
COMBANO
COMTRONICS
DIAMOND
EAGLE
042 043 045
046
022
030
052
MEMOREX
MOVIE TIME
NSC
SHERITECH
SIGNAL
SIGNATURE
SL MARX
SPRUCER
STARCOM
OAK
030
047 078
002 004 008
009
008 030
067
PANASONIC
PARAGON
PHILIPS
EASTERN
ELECTRICORD
GE
STARGATE
SYLVANIA
TADIRAN
TANDY
TEXSCAN
TOCOM
TOSHIBA
UNIKA
UNITED CABLE
UNIVERSAL
030
017
GEMINI
PIONEER
029 067
039 040 056
001
007 014 024
004 053
005 007 014
024 026 027
GI
POST NEWS WEEK
PRUCER
PTS
GOLDEN CHANNEL
HAMLIN
HITACHI
HOSPITALITY
JERROLD
059
011 048 071
072 073 074
001
PULSAR
RCA
047
P A G E 5 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Dépannage
Voici quelques conseils pratiques et faciles de dépannage.
SOLUTIONS POSSIBLES
SYMPTOMES
• Vérifier le raccordement ou l’emplacement de l’antenne.
• Vérifier l’entrée du câble.
Image neigeuse / son indistinct
• Voir si la touche TV/VCR du magnétoscope est réglée à TV.
• Vérifier l’orientation et / ou l’emplacement de l’antenne.
• Vérifiez l’entrée du câble.
• Assurez-vous que le câble raccordant l’antenne au téléviseur est bien connecté.
Images multiples ou
« image fantôme »
Les problèmes ou la déformation de l’image peut provenir d’appareils ménagers, d’un
éclairage trop puissant, d’automobiles, de camions, d’ordinateurs, de téléphones porta-
bles ou d’appareils médicaux.
• Si possible, augmenter la distance entre le téléviseur et les appareils en cause
ou mettre ceux-ci hors tension.
Parasites : des lignes prononcées
d’un bout à l’autre de l’écran et son
indistinct
• Vérifier le volume du son.
• Assurez-vous que le téléviseur n’est pas assourdi.
Image normale sans son
• Essayez une autre chaîne. Le problème peut provenir du diffuseur et non du téléviseur.
• Les câbles du son sont-ils installés correctement ?
• Les fils des haut-parleurs externes (le cas échéant) sont-ils installés correctement?
• Assurez-vous que les haut-parleurs sont sous tension au menu Audio.
• Si le mode Audio est réglé à SAP, cette chaîne pourrait ne pas prendre SAP en
charge.
• Avez-vous invoqué le bon mode de visionnement (TV ou câble) ?
Absence d'image et son indistinct
•
Assurez-vous que les canaux de sortie des appareils A/V sont réglés à la même chaîne (3 ou 4).
• Assurez-vous d’avoir bien serré les connexions.
• Le cordon d’alimentation est-il branché ?
Absence d’image et de son
• Assurez-vous que la prise de courant CA fonctionne correctement. (Faites-en l’es
sai en y branchant un autre appareil ou essayez une autre prise).
• Assurez-vous que les commandes de luminance et du son sont réglées correctement.
• Syntonisez une autre chaîne. Le problème provient peut-être du diffuseur.
• Vérifiez les réglages de la couleur au menu Vidéo.
• Syntonisez une autre chaîne. Le problème provient peut-être du diffuseur.
Absence de couleurs; présence du son
• L’option Sous-titre peut-être en mode Texte. Sélectionnez CC1 au menu Sous-Titre
/ Texte ou Arrêt au menu Sous-Titre.
Image est recouverte d’une grande
boîte noire; présence du son
• L’émission est en mode panoramique. Ceci veut dire que, bien que la forme du
téléviseur soit carrée, l’émission est rectangulaire. Songez aux lignes comme à
des espaces vides que l’émission ne remplit pas plutôt qu’à une image masquée.
Parce que cette image est la reproduction directe d’un film tel que vous
l’apercevriez au cinéma, vous en voyez DAVANTAGE en présence de ces lignes.
Image comportant deux lignes
horizontales noires, une en
haut et l’autre en bas de l’écran
• Si vous oubliez le code secret, composez « 7 », « 7 », « 7 » et « 7 » sur la télé-
commande lorsque l’affichage vous demande d’entrer le code secret.
Code secret manquant
P A G E 5 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Dépannage (suite)
La télécommande ne fonctionne pas • Assurez-vous que les piles sont neuves et qu’elles sont bien installées.
Impossible de modifier les options
• Essayez de débrancher le téléviseur pendant quelques minutes, puis de le
sélectionnées ou de les sélectionner
brancher de nouveau.
Absence d’image et de son
en sélectionnant une source
non câblée
• Vérifiez si l’appareil source est sous tension.
• Assurez-vous que les raccordements à l’arrière du téléviseur et sur l’appareil
source sont bien connectés.
Affaiblissement ou absence
de Stéréophonie avec le
magnétoscope
• Assurez-vous que tous les raccordements sont bien connectés.
• Assurez-vous d’avoir effectué les bons réglages au menu Mode Audio.
• Si vous syntonisez les canaux 3 ou 4 en vue de l’écoute avec magnétoscope,
la stéréophonie ne fonctionnera pas.
Image incrustée noire
ou sans contraste
• Assurez-vous que la source d’image incrustée (I.D.I.) est en marche.
• Consulter le menu I.D.I. (image incrustée) pour en ajuster les réglages, si
nécessaire.
• Assurez-vous que tous les fils sont correctement connectés.
• Vérifiez si la source d’image incrustée (I.D.I.) est réglée correctement.
Image incrustée neigeuse
• Vérifiez si la touche TV/VCR du magnétoscope est réglée à TV ou changez de
avec l’antenne comme source
source d’image incrustée (I.D.I.).
Heure inexacte
• Remettez l’horloge à l’heure manuellement.
• Même si vous est abonné au câble, le signal peut être faible. Le cas échéant,
la qualité de l’image peut être affectée par d’autres facteurs. Téléphonez à
votre câblodistributeur pour déterminer si le problème provient du service de
télévision par câble.
Brouillage de l’image
P A G E 5 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Fiche technique du produit
• Ce modèle est conforme aux spécifications décrites ci-après.
• La conception et les spécifications peuvent être modifiées sans préavis.
• Ce modèles peut être incompatible avec toutes fonctions et / ou spécifications ajoutées à une
date ultérieure.
Modèle
44HM85
Taille horizontale
Hauteur
Profondeur
Poids
101,6 cm (40 po)
74,2 cm (29.2 po)
36,6 cm (14.4 po)
23 kg (50.7 lb)
Alimentation
AC 120V, 60Hz
Système de télévision
Canaux de télévision
NTSC. Exige un boîtier numérique supplémentaire pour la réception par satellite ou numérique par le câble.
VHF: 2 - 13
UHF: 14 - 69
CATV: 1 - 125
Consommation d’énergie
Antenne
230W
Terminal externe de 75 ohm sur VHF/UHF
15W x 2
Sortie Audio
Points d’accès Entrée / Sortie
Entrée A/V (3 jeux)
Sortie écran (1 jeu)
Entrée S-Vidéo (3 jeux)
Entrée COLORSTREAM HD (2 jeux)
Entrée RVB (rouge, vert, bleu) (RGB) (1)
Entrée HDMI (1)
Entrée audio RVB (1 jeu)
Point d’accès de mise à niveau (1)
Entrée RF (1)
P A G E 5 6
Download from Www.Somanuals.com. All Manuals Search And Download.
562C-57~58(4)_Fr 90/6/18 12:29 PM Page 1
Garantie limitée aux États-Unis
Téléviseurs de modèle DLPMC
Toshiba America Consumer Products, L.L.C. (« TACP ») accorde les
(1) Vous devez fournir le contrat de vente ou autre preuve d’achat.
(2) Toutes réparations sur ce téléviseur DLP au titre de la garantie
doivent être effectuées par un centre de service autorisé TCAP.
(3) Ces garanties accordées par TCAP sont valables uniquement si le
téléviseur DLP est acheté aux États-Unis ou à Porto Rico.
(4) Cette garantie ne s’applique pas aux produits et services
suivants : installation, réglage ni ajustement des réglages du
client; installation ou réparation d’antennes. Le client est
responsable pour tout problème de réception causé par une
antenne inadéquate.
garanties limitées suivantes aux consommateurs d’origine aux États-Unis.
CES GARANTIES LIMITÉES SONT ACCORDÉES STRICTEMENT ÀU
PREMIER ACHETEUR OU À TOUTE PERSONNE RECEVANT EN CADEAU CE
TÉLÉVISEUR DLP DU PREMIER ACHETEUR, ET À AUCUN AUTRE
ACHETEUR OU CESSIONNAIRE.
CES GARANTIES NE COUVRENT PAS LES PRODUITS ACHETÉS AUX
ÉTATS-UNIS AUX FINS D’UTILISATION AU CANADA.
CES GARANTIES NE COUVRENT PAS LES PRODUITS ACHETÉS AU
CANADA AUX FINS D’UTILISATION AUX ÉTATS-UNIS.
(5) Ces garanties sont uniquement accordées en cas de vices de
fonctionnement provenant d'un défaut de matière, de
fabrication ou de conception, tel qu’indiqué précédemment.
Elles ne s’étendent pas aux téléviseurs DLP ni aux pièces
perdus ou jetées par le client; aux dommages au téléviseur DLP
et à ses pièces suite à un incendie, à de l’abus et aux
accidents; aux cas fortuits (dont la foudre ou les variations
d’alimentation électrique), aux installations, à l’entretien et à
l’utilisation incorrects et en violation des directives stipulées
par TCAP; à l’utilisation et au mauvais fonctionnement
occasionnés par l’utilisation simultanée de ce produit et des
composants y étant raccordés ni aux unités altérées et dont le
numéro de série a été enlevé, altéré, mutilé ou rendu illisible.
Garantie limitée d’un (1) an sur les pièces et la main-d’œuvre*
TCAP garantit ce téléviseur DLP contre tous vices de
fonctionnement provenant d'un défaut de matière, de fabrication ou
de conception pendant une période d’un (1) an de la date d’achat
au détail. PENDANT CETTE PÉRIODE, TCAP POURRA, À SON GRÉ,
RÉPARER TOUTE PIÈCE DÉFECTUEUSE OU LA REMPLACER PAR UNE
PIÈCE NEUVE OU REMISE À NEUF SANS FRAIS DE PIÈCES NI DE
MAIN-D’ŒUVRE POUR VOUS. En cas de service au titre de la
garantie, le personnel des ateliers de réparation autorisés TCAP se
rendra à votre domicile. Selon le type de réparation requis, le
service sera exécuté dans votre demeure ou dans un centre de
service autorisé TCAP, puis retourné chez vous sans frais.
Pour obtenir du service au titre de la garantie
Dans l’éventualité où, après avoir suivi les directives présentées
dans ce guide et avoir vérifié la section traitant du dépannage, il
vous faut toujours du service :
Garantie limitée d’un (1) an sur l'ampoule*
TCAP garantit l'ampoule à l’intérieur de ce téléviseur DLP contre
tous vices de fonctionnement provenant d'un défaut de matière, de
fabrication ou de conception pendant une période d’un (1) an de la
date d’achat au détail. PENDANT CETTE PÉRIODE, TCAP POURRA, À
SON GRÉ, REMPLACER L'AMPOULE DÉFECTUEUSE PAR UNE AMPOULE
NEUVE OU REMISE À NEUF SANS FRAIS POUR VOUS. LES FRAIS DE
MAIN-D’ŒUVRE POUR REMPLACER L'AMPOULE NE SONT PAS
COUVERTS PAR LA GARANTIE. Cette ampoule est une composante
remplaçable par l’utilisateur.
(1) Visitez l’atelier de réparation autorisé TCAP le plus près de chez
vous ou consultez le site Web de TCAP au
www.tcap.toshiba.com/service ou téléphonez-nous sans frais
au 1 800 631-3811.
(2) Présentez votre contrat de vente ou toute autre preuve d’achat
au personnel de l’atelier de réparation autorisé TCAP.
Pour de plus amples renseignements, visitez le site Web de
TCAP au: www.tacp.toshiba.com
Unités de location
TOUTES GARANTIES IMPLICITES EN VERTU DES LOIS D’UN ÉTAT
AMÉRICAIN QUELCONQUE, Y COMPRIS LES GARANTIES IMPLICITES DE
QUALITÉS MARCHANDES ET D’ADAPTATION À UN USAGE PARTICULIER
SE LIMITENT EXPRESSÉMENT À LA DURÉE DES GARANTIES LIMITÉES
FORMULÉES DANS CE DOCUMENT. À L’EXCEPTION DE TOUTES GARANTIES
IMPLICITES EN VERTU DES LOIS D’UN ÉTAT AMÉRICAIN QUELCONQUE ET
LIMITÉES DANS LES PRÉSENTES, LA DISPOSITION DE GARANTIE CI-
DESSUS EST ACCORDÉE EXCLUSIVEMENT ET EN REMPLACEMENT DE
TOUTES AUTRES GARANTIES, CONTRATS ET OBLIGATIONS SEMBLABLES
DE TCAP PAR RAPPORT À LA RÉPARATION OU AU REMPLACEMENT DE
TOUTES PIÈCES. EN AUCUN CAS, TCAP NE SERA-T-ELLE TENUE
RESPONSABLE POUR TOUS DOMMAGES ACCESSOIRES (Y COMPRIS, MAIS
SANS S’Y LIMITER, À LA PERTE DE PROFITS, AUX INTERRUPTIONS DES
AFFAIRES, À LA MODIFICATION OU À L’EFFACEMENT DE DONNÉES
ENREGISTRÉES SUITE À SON UTILISATION, À DE L’ABUS OU À TOUTE
INCAPACITÉ D’UTILISER CE PRODUIT).
Personne (agent, distributeur, concessionnaire ou entreprise) n’est
autorisée à modifier, altérer ou étendre les modalités de ces
garanties de quelque manière que ce soit. Par les présentes, la
période de temps requise avant d’intenter toute poursuite visant à
obliger TCAP à intervenir en vertu de cette garantie ou de toute loi
canadienne ou provinciale quelconque est limitée à 90 jours de la
date à laquelle le client découvre ou devrait découvrir une
défectuosité. Ces limites ne s’appliquent pas aux garanties
implicites découlant de la loi d’un état américain quelconque.
Dans le cas d’unités de location, la garantie sur le téléviseur et sur
l'ampoule qu’il contient entre en vigueur dès la première date de
location ou dans les trente (30) jours de la date d’expédition à
l’entreprise de location, la première des deux dates prévalant.
*Garantie limitée pour appareils commerciaux
TCAP accorde aux commerçants qui vendent ces téléviseurs, ou qui
les utilisent à des fins commerciales, la garantie suivante sur les
téléviseurs DLP, ainsi que sur l'ampoule qu’ils contiennent : toutes
les pièces sont garanties contre tous vices de fonctionnement
provenant d'un défaut de matière, de fabrication ou de conception
pendant une période de quatre-vingt-dix (90) jours de la date
d’achat initial. PENDANT CETTE PÉRIODE, TCAP POURRA, À SON GRÉ,
RÉPARER TOUTE PIÈCE DÉFECTUEUSE OU LA REMPLACER PAR UNE
PIÈCE NEUVE OU REMISE À NEUF SANS FRAIS DE PIÈCES NI DE
MAIN-D’ŒUVRE POUR VOUS. LE SERVICE SUR PLACE EST OFFERT
UNIQUEMENT EN DEDANS DE 100 KM DE TOUT CENTRE DE SERVICE
AUTORISÉ TOSHIBA.
Guide d’utilisation et enregistrement du produit
Avant d’exploiter téléviseur DLP, veuillez lire entièrement ce guide.
Veuillez remplir et poster la carte d’enregistrement du produit, ou
enregistrez ce produit sur Internet au www.toshiba.com/service
dès que possible pour que TCAP puisse vous offrir des nouveaux
produits conçus précisément pour répondre à vos besoins, et
communiquer avec vous dans l’éventualité peu probable où il faut
vous transmettre un avis de sécurité en vertu du Consumer Product
Safety Act. Vos droits au titre de cette garantie ne sont toutefois
pas diminués si vous n’enregistrez pas ce produit.
CETTE GARANTIE VOUS ACCORDE DES DROITS LÉGAUX PRÉCIS ET IL
SE PEUT QUE VOUS AYEZ D’AUTRES DROITS, LESQUELS PEUVENT
VARIER D’UN ÉTAT AMÉRICAIN À L’AUTRE. CERTAINES PROVINCES
CANADIENNES INTERDISSENT TOUTES LIMITES SUR LA DURÉE D’UNE
GARANTIE IMPLICITE, SUR LES DÉLAIS DE POURSUITE OU SUR
L’EXCLUSION OU LES LIMITATIONS EN MATIÈRE DE DOMMAGES
ACCESSOIRES ET INDIRECTS; PAR CONSÉQUENT, LES LIMITES ET
EXCLUSIONS SUSMENTIONNÉES POURRAIENT NE PAS VOUS TOUCHER
DANS DE TELS CAS.
Vos responsabilités
LES GARANTIES SUSMENTIONNÉES SONT SOUMISES AUX CONDITIONS
SUIVANTES :
Download from Www.Somanuals.com. All Manuals Search And Download.
562C-57~58(4)_Fr 90/6/18 12:29 PM Page 2
Garantie limitée au Canada
Téléviseurs de modèle DLPMC
Toshiba du Canada Limitée (TCL) accorde les garanties limitées
(1) Vous devez fournir le contrat de vente ou autre preuve d’achat.
(2) Toutes réparations sur ce téléviseur DLP au titre de la garantie
doivent être effectuées par un centre de service autorisé Toshiba.
(3) Ces garanties accordées par TCL sont valables uniquement si le
téléviseur DLP est acheté au Canada, chez un concessionnaire
autorisé Toshiba, aux fins d’utilisation au Canada.
(4) Cette garantie ne s’applique pas aux produits et services
suivants : installation, réglage ni ajustement des réglages du
client; installation ou réparation d’antennes. Le client est
responsable pour tout problème de réception causé par une
antenne inadéquate.
(5) Ces garanties sont uniquement accordées en cas de vices de
fonctionnement provenant d'un défaut de matière, de
fabrication ou de conception, tel qu’indiqué précédemment.
Elles ne s’étendent pas aux téléviseurs DLP ni aux pièces
perdus ou jetées par le client; aux dommages au téléviseur DLP
et à ses pièces suite à un incendie, à de l’abus et aux
accidents; aux cas fortuits (dont la foudre ou les variations
d’alimentation électrique), aux installations, à l’entretien et à
l’utilisation incorrects et en violation des directives stipulées
par TCL; à l’utilisation et au mauvais fonctionnement
suivantes aux consommateurs d’origine au Canada.
CES GARANTIES LIMITÉES SONT ACCORDÉES STRICTEMENT ÀU
PREMIER ACHETEUR OU À TOUTE PERSONNE RECEVANT EN CADEAU CE
TÉLÉVISEUR DLP DU PREMIER ACHETEUR, ET À AUCUN AUTRE
ACHETEUR OU CESSIONNAIRE.
CES GARANTIES NE COUVRENT PAS LES PRODUITS ACHETÉS AUX
ÉTATS-UNIS AUX FINS D’UTILISATION AU CANADA.
CES GARANTIES NE COUVRENT PAS LES PRODUITS ACHETÉS AU
CANADA AUX FINS D’UTILISATION AUX ÉTATS-UNIS.
Garantie limitée d’un (1) an sur les pièces et la main-d’œuvre*
TCL garantit ce téléviseur DLP contre tous vices de fonctionnement
provenant d'un défaut de matière, de fabrication ou de conception
pendant une période d’un (1) an de la date d’achat au détail.
PENDANT CETTE PÉRIODE, TCL POURRA, À SON GRÉ, RÉPARER TOUTE
PIÈCE DÉFECTUEUSE OU LA REMPLACER PAR UNE PIÈCE NEUVE OU
REMISE À NEUF SANS FRAIS DE PIÈCES NI DE MAIN-D’ŒUVRE POUR
VOUS. En cas de service au titre de la garantie, le personnel des
ateliers de réparation autorisés Toshiba se rendra à votre domicile.
Selon le type de réparation requis, le service sera exécuté dans
votre demeure ou dans un centre de service autorisé Toshiba, puis
retourné chez vous sans frais. LE SERVICE À DOMICILE EST OFFERT
UNIQUEMENT EN DEDANS DE 100 KM DE TOUT CENTRE DE SERVICE
AUTORISÉ TOSHIBA.
occasionnés par l’utilisation simultanée de ce produit et des
composants y étant raccordés ni aux unités altérées et dont le
numéro de série a été enlevé, altéré, mutilé ou rendu illisible.
Pour obtenir du service au titre de la garantie
Dans l’éventualité où, après avoir suivi les directives présentées
dans ce guide et avoir vérifié la section traitant du dépannage, il
vous faut toujours du service :
Garantie limitée d’un (1) an sur l'ampoule*
TCL garantit l'ampoule à l’intérieur de ce téléviseur DLP contre tous
vices de fonctionnement provenant d'un défaut de matière, de
fabrication ou de conception pendant une période d’un (1) an de la
date d’achat au détail. PENDANT CETTE PÉRIODE, TCL POURRA, À
SON GRÉ, REMPLACER L'AMPOULE DÉFECTUEUSE PAR UNE AMPOULE
NEUVE OU REMISE À NEUF SANS FRAIS POUR VOUS. LES FRAIS DE
MAIN-D’ŒUVRE POUR REMPLACER L'AMPOULE NE SONT PAS
COUVERTS PAR LA GARANTIE. Cette ampoule est une composante
remplaçable par l’utilisateur.
(1) Visitez l’atelier de réparation autorisé Toshiba le plus près de
chez vous ou consultez le site Web de TCL au www.toshiba.ca.
(2) Présentez votre contrat de vente ou toute autre preuve d’achat
au personnel de l’atelier de réparation autorisé Toshiba.
Pour de plus amples renseignements, visitez le site Web de TCL au
www.toshiba.ca
TOUTES GARANTIES IMPLICITES EN VERTU DES LOIS D’UNE PROVINCE
CANADIENNE QUELCONQUE, Y COMPRIS LES GARANTIES IMPLICITES DE
QUALITÉS MARCHANDES ET D’ADAPTATION À UN USAGE PARTICULIER
SE LIMITENT EXPRESSÉMENT À LA DURÉE DES GARANTIES LIMITÉES
FORMULÉES DANS CE DOCUMENT. À L’EXCEPTION DE TOUTES GARANTIES
IMPLICITES EN VERTU DES LOIS D’UNE PROVINCE CANADIENNE
QUELCONQUE ET LIMITÉES DANS LES PRÉSENTES, LA DISPOSITION DE
GARANTIE CI-DESSUS EST ACCORDÉE EXCLUSIVEMENT ET EN
Unités de location
Dans le cas d’unités de location, la garantie sur le téléviseur et sur
l'ampoule qu’il contient entre en vigueur dès la première date de
location ou dans les trente (30) jours de la date d’expédition à
l’entreprise de location, la première des deux dates prévalant.
REMPLACEMENT DE TOUTES AUTRES GARANTIES, CONTRATS ET
OBLIGATIONS SEMBLABLES DE TCL PAR RAPPORT À LA RÉPARATION OU
AU REMPLACEMENT DE TOUTES PIÈCES. EN AUCUN CAS, TCL NE SERA-T-
ELLE TENUE RESPONSABLE POUR TOUS DOMMAGES ACCESSOIRES (Y
COMPRIS, MAIS SANS S’Y LIMITER, À LA PERTE DE PROFITS, AUX
INTERRUPTIONS DES AFFAIRES, À LA MODIFICATION OU À
*Garantie limitée pour appareils commerciaux
TCL accorde aux commerçants qui vendent ces téléviseurs, ou qui
les utilisent à des fins commerciales, la garantie suivante sur les
téléviseurs DLP, ainsi que sur l'ampoule qu’ils contiennent : toutes
les pièces sont garanties contre tous vices de fonctionnement
provenant d'un défaut de matière, de fabrication ou de conception
pendant une période de quatre-vingt-dix (90) jours de la date
d’achat initial. PENDANT CETTE PÉRIODE, TCL POURRA, À SON GRÉ,
RÉPARER TOUTE PIÈCE DÉFECTUEUSE OU LA REMPLACER PAR UNE
PIÈCE NEUVE OU REMISE À NEUF SANS FRAIS DE PIÈCES NI DE
MAIN-D’ŒUVRE POUR VOUS. LE SERVICE SUR PLACE EST OFFERT
UNIQUEMENT EN DEDANS DE 100 KM DE TOUT ATELIER DE
RÉPARATION AUTORISÉ TOSHIBA.
L’EFFACEMENT DE DONNÉES ENREGISTRÉES SUITE À SON UTILISATION,
À DE L’ABUS OU À TOUTE INCAPACITÉ D’UTILISER CE PRODUIT).
Personne (agent, distributeur, concessionnaire ou entreprise) n’est
autorisée à modifier, altérer ou étendre les modalités de ces garanties
de quelque manière que ce soit. Par les présentes, la période de
temps requise avant d’intenter toute poursuite visant à obliger TCL à
intervenir en vertu de cette garantie ou de toute loi canadienne ou
provinciale quelconque est limitée à 90 jours de la date à laquelle le
client découvre ou devrait découvrir une défectuosité. Ces limites ne
s’appliquent pas aux garanties implicites découlant d’une loi
provinciale et canadienne quelconque.
Guide d’utilisation et enregistrement du produit
Avant d’exploiter téléviseur DLP, veuillez lire entièrement ce guide.
CETTE GARANTIE VOUS ACCORDE DES DROITS LÉGAUX PRÉCIS ET IL
SE PEUT QUE VOUS AYEZ D’AUTRES DROITS, LESQUELS PEUVENT
VARIER D’UNE PROVINCE CANADIENNE À L’AUTRE. CERTAINES
PROVINCES CANADIENNES INTERDISSENT TOUTES LIMITES SUR LA
DURÉE D’UNE GARANTIE IMPLICITE, SUR LES DÉLAIS DE POURSUITE
OU SUR L’EXCLUSION OU LES LIMITATIONS EN MATIÈRE DE
DOMMAGES ACCESSOIRES ET INDIRECTS; PAR CONSÉQUENT, LES
LIMITES ET EXCLUSIONS SUSMENTIONNÉES POURRAIENT NE PAS
VOUS TOUCHER DANS DE TELS CAS.
Enregistrez ce produit sur Internet au www.toshiba.ca dès que
possible pour que TCL puisse vous offrir un meilleur service à la
clientèle et un soutien de produit supérieur. Vos droits au titre de
cette garantie ne sont toutefois pas diminués si vous n’enregistrez
pas ce produit.
Vos responsabilités
LES GARANTIES SUSMENTIONNÉES SONT SOUMISES AUX CONDITIONS
SUIVANTES :
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Download from Www.Somanuals.com. All Manuals Search And Download.
SIÈGE SOCIAL : 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA – TÉL. : 905 470-5400
CENTRES DE SERVICE :
TORONTO : 191 McNABB STREET, MARKHAM, ONTARIO L3R 8H2, CANADA – TÉL. : 905 470-5400
MONTRÉAL : 18050, RTE TRANSCANADIENNE, KIRKLAND (QUÉBEC) H9J 4A1, CANADA – TÉL. : 514 390-7766
VANCOUVER : 22171 FRASERWOOD WAY, RICHMOND, B.C., V6W 1J5, CANADA – TÉL.: 604 303-2500
ColorStream, StableSound et TheaterWide sont des marques déposées de la Toshiba America Consumer Products, L.L.C.
Le logo DLP et le médaillon DLP sont des marques de commerce de Texas Instruments.
Dolby est une marque de commerce déposée de Dolby Laboratories.
PRINTED IN MEXICO
P/N: 3828VA0562C
Download from Www.Somanuals.com. All Manuals Search And Download.
|