THOMSON TG787
Wireless VoIP Residential Gateway
Setup and User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
THOMSON TG787
Setup and User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright
Copyright ©1999-2008 Thomson. All rights reserved.
Distribution and copying of this document, use and communication of its contents is not permitted without written authorization
from Thomson. The content of this document is furnished for informational use only, may be subject to change without notice,
and should not be construed as a commitment by Thomson. Thomson assumes no responsibility or liability for any errors or
inaccuracies that may appear in this document.
Thomson Telecom Belgium
Prins Boudewijnlaan, 47
B-2650 Edegem
Belgium
Trademarks
The following trademarks may be used in this document:
>
>
>
>
DECT is a trademark of ETSI.
Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
Ethernet™ is a trademark of Xerox Corporation.
Wi-Fi®, WMM® and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance®. "Wi-Fi CERTIFIED", "Wi-Fi ZONE",
"Wi-Fi Protected Access", "Wi-Fi Multimedia", "Wi-Fi Protected Setup", WPA", WPA2" and their respective logos are trade-
marks of the Wi-Fi Alliance®.
>
>
UPnP™ is a certification mark of the UPnP™ Implementers Corporation.
Microsoft®, MS-DOS®, Windows®, Windows NT® and Windows Vista® are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
>
Apple® and Mac OS® are registered trademarks of Apple Computer, Incorporated, registered in the United States and
other countries.
>
>
UNIX® is a registered trademark of UNIX System Laboratories, Incorporated.
Adobe®, the Adobe logo, Acrobat and Acrobat Reader are trademarks or registered trademarks of Adobe Systems, Incor-
porated, registered in the United States and/or other countries.
Other brands and product names may be trademarks or registered trademarks of their respective holders.
Document Information
Status: v2.0 (June 2008)
Reference: E-DOC-CTC-20080118-0051
Short Title: Setup and User Guide TG787 R8.1 (en)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1.1 Preliminary Steps............................................................................................ 4
1.2 Placing your Thomson Gateway ..................................................................... 5
1.3 Installing your Thomson Gateway .................................................................. 6
Guided Installation .................................................................................................................................7
Manual Installation.................................................................................................................................9
2.1 Thomson Gateway LED Behaviour ................................................................ 12
2.2 Thomson Gateway Web Interface ................................................................. 14
3.1 Adding a Computer to your Network............................................................ 20
Connecting a computer using Wireless..............................................................................................21
Connecting a computer using Ethernet..............................................................................................22
3.2 Adding a Phone to your Network ................................................................. 23
Connecting Phones to the Thomson Gateway...................................................................................24
Configuring your Thomson Gateway .................................................................................................25
Multiple Identities.................................................................................................................................27
4.1 Sharing Content on your Network................................................................ 30
Setting Up the File Server....................................................................................................................32
Managing your Shared Content..........................................................................................................35
Using UPnP AV to Share Content with Media Devices .....................................................................36
Accessing your Shared Content by FTP .............................................................................................37
4.2 Telephony Features....................................................................................... 39
Address Book........................................................................................................................................40
Telephony services...............................................................................................................................41
Viewing Telephony Statistics ..............................................................................................................45
E-DOC-CTC-20080118-0051 v2.0
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
4.3 Universal Plug and Play ................................................................................ 46
Accessing Your Thomson Gateway with UPnP .................................................................................47
Managing your Internet connection with UPnP.................................................................................48
Configuring UPnP on the Thomson Gateway....................................................................................50
Installing UPnP on Windows XP .........................................................................................................51
4.5 Dynamic DNS................................................................................................ 55
5.1 Encryption..................................................................................................... 58
Configuring WEP Encryption...............................................................................................................59
Configuring WPA-PSK Encryption ......................................................................................................60
5.2 Access Control.............................................................................................. 61
5.3 Disabling SSID Broadcast ............................................................................. 64
6.1 Firewall.......................................................................................................... 66
6.2 Web site Filtering .......................................................................................... 67
Denying access to a specific Web site................................................................................................68
Allowing access to a specific Web site...............................................................................................69
Redirecting a Web site .........................................................................................................................70
Redirecting all Web sites .....................................................................................................................71
7.1 Setup wizard Troubleshooting...................................................................... 74
Wired Connection Troubleshooting....................................................................................................76
Wireless Connection Troubleshooting ...............................................................................................77
7.3 Voice over IP Troubleshooting...................................................................... 78
7.4 Reset to Factory Defaults ............................................................................. 79
E-DOC-CTC-20080118-0051 v2.0
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Setup and User Guide
About this Setup and User Guide
Used Symbols
A note provides additional information about a topic.
A caution warns you about potential problems or specific precautions that need to be taken.
Terminology
Generally, the THOMSON TG787 will be referred to as Thomson Gateway in this Setup and User Guide.
Typographical Conventions
Following typographical convention is used throughout this manual:
ꢀ
ꢀ
ꢀ
ꢀ
Sample text indicates a hyperlink to a Web site.
Sample text indicates an internal cross-reference.
Example: If you want to know more about guide, see “1 Introduction” on page 7”.
Sample text indicates an important content-related word.
Example: To enter the network, you must authenticate yourself.
Sample text indicates a GUI element (commands on menus and buttons, dialog box elements, file
names, paths and folders).
Example: On the File menu, click Open to open a file.
Documentation and software updates
Thomson continuously develops new solutions, but is also committed to improving its existing products.
For more information on Thomson's latest technological innovations, documents and software releases, visit
E-DOC-CTC-20080118-0051 v2.0
1
Download from Www.Somanuals.com. All Manuals Search And Download.
About this Setup and User Guide
E-DOC-CTC-20080118-0051 v2.0
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Installation
1 Installation
Introduction
In a few minutes you will be able to access the Internet using your Thomson Gateway.
This Setup and User Guide will show you how to set up your Thomson Gateway and how to connect your
computer(s) to the Internet.
E-DOC-CTC-20080118-0051 v2.0
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Installation
1.1 Preliminary Steps
DSL service
The DSL service must be up and running on your telephone line.
If both conventional telephone and DSL service are simultaneously available from the same copper pair, you
will need a central splitter or distributed filters for decoupling DSL and telephone signals.
Public telephone lines carry voltages that can cause electric shock. Only try to set up splitter/
filters that have been designed to be installed by unqualified personnel. For further assistance,
contact your Internet Service Provider.
Computer requirements
ꢀ
To connect a computer via Ethernet, make sure the computer is equipped with an Ethernet Network
Interface Card (NIC).
ꢀ
For wireless networking, you will need a WiFi-certified wireless client adapter for each computer you
want to connect wirelessly.
Internet connection details
You may need the following connection details from your Internet Service Provider (ISP):
ꢀ
ꢀ
ꢀ
ꢀ
Your ISP’s method for connecting to the Internet (for example PPPoE)
The VPI/VCI (for example 8/35)
Your user name and password to connect to the Internet for PPP connections
Your IP settings in case of static configurations
Optionally your ISP may indicate the Service Profile to use during Setup.
You may have received this information when you subscribed to DSL at your Internet Service Provider (ISP).
You will be prompted for this information at a given step in the installation procedure.
Voice over IP (VoIP) connection details
If you want to be able to make phone calls over the Internet, you will need following details for your VoIP
connection:
ꢀ
ꢀ
A user account at your VoIP Service Provider
The server settings of your VoIP Service
These settings may be provided by your Internet Service Provider.
E-DOC-CTC-20080118-0051 v2.0
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Installation
1.2 Placing your Thomson Gateway
Possibilities
You can mount the Thomson Gateway on a wall or simply place it on a desk.
Wall mount
Proceed as follows to mount the Thomson Gateway on a wall or other vertical surface:
1
2
3
4
Take the wall mount leaflet out of the box.
Stick the wall mount leaflet on the place where your want to mount your Thomson Gateway.
Drill two holes through the marked positions.
Fasten two screws in the wall holes. The screws should protrude five millimetres from the surface of the
wall.
5
Attach your Thomson Gateway on the wall using the two mounting slots on the bottom.
If you install the Thomson Gateway onto plasterboard, use dowels to secure the screws. Otherwise
the strain of the cables connected to the Thomson Gateway rear panel connectors could pull the
Thomson Gateway from the wall.
E-DOC-CTC-20080118-0051 v2.0
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Installation
1.3 Installing your Thomson Gateway
Installation methods
There two ways to set up your Thomson Gateway:
ꢀ
ꢀ
Guided Installation
How it works
The Setup wizard included on the CD will guide you through all configuration aspects of your Thomson
Gateway. This is the recommended way to install your Thomson Gateway.
Requirements
ꢀ
Your computer must run one of the following operating systems:
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Microsoft Windows Vista (x64)
Microsoft Windows XP Service Pack (SP) 2 or higher
Microsoft Windows XP x64 SP 1 or higher
Microsoft Windows 2000 SP4
Mac OS X 10.3 (Panther)
Mac OS X 10.4 (Tiger)
ꢀ
You must have administrative rights on your computer
Getting started
Manual Installation
How it works
The Setup and User Guide will first help you to connect your computer to the Thomson Gateway. After this is
done, you can configure your Thomson Gateway using your web browser.
Requirements
Javascript must be enabled on your web browser.
Getting started
E-DOC-CTC-20080118-0051 v2.0
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Installation
1.3.1 Guided Installation
Connecting devices: wait!
Do not plug in any cables or connect any devices until you are prompted to do so by the wizard.
In case of problems
If you encounter problems during this installation please refer to “7.1 Setup wizard Troubleshooting” on
Starting the wizard
To start the wizard:
1
2
Insert the Setup CD into your computer's CD- or DVD-ROM drive.
If your computer runs:
ꢁ
ꢁ
Microsoft Windows: The CD should autostart.
Mac OS X: Double-click Menu in the window with the content of the CD.
3
4
5
Select the language of your choice and click OK.
The Setup wizard will now guide you through the installation.
At the end of the installation, following screen appears:
6
your Thomson Gateway.
7
8
Click Finish.
The CD menu appears.
E-DOC-CTC-20080118-0051 v2.0
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Installation
CD menu
On the CD Menu, click:
ꢀ
ꢀ
ꢀ
(Re)configure my Thomson Gateway to reconfigure your Thomson Gateway or add a new computer to
your network.
View Documentation to view the documentation that is available for your Thomson Gateway. This list
will be automatically updated if you are connected to the Internet.
Actual available items may depend on the Setup CD delivered with your Thomson Gateway.
E-DOC-CTC-20080118-0051 v2.0
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Installation
1.3.2 Manual Installation
Procedure
Proceed as follows:
1
2
Connect the cables
Proceed as follows:
1
Connect your computer to the Thomson Gateway as described in “3.1 Adding a Computer to your
2
3
4
Connect the Thomson Gateway to the DSL line.
Connect the power supply.
Turn on the Thomson Gateway.
Configure the Thomson Gateway
1
2
Open your web browser.
The Thomson Gateway informs you that you have not yet configured your Thomson Gateway.
3
4
Click Setup my Thomson Gateway.
The Easy Setup wizard appears. This wizard will guide you through the configuration of your Thomson
Gateway. Click Next and follow the instructions.
E-DOC-CTC-20080118-0051 v2.0
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Installation
E-DOC-CTC-20080118-0051 v2.0
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Thomson Gateway Basics
2.1 Thomson Gateway LED Behaviour
Status LEDs
On the top panel of your Thomson Gateway, you can find a number of status LEDs, indicating the state of the
device during normal operation.
Power LED
Name
Green
Red
Colour
Solid on
Solid on
Solid on
State
Power on, normal operation
Power on, self-test failed, indicating device malfunction
Bootloader active (during upgrade)
Power off
Orange
Off
Ethernet LED
Name
Colour
Blinking
Solid on
State
Green
Ethernet activity
Ethernet connection, no activity
No Ethernet connection
Off
Wireless/WLAN LED
Name
Colour
State
Green
Blinking
Solid on
Blinking
Solid on
Blinking
Solid on
Toggling
Wireless activity, WPA(2) encryption
No wireless activity, WPA(2) encryption
Wireless activity, WEP encryption
No wireless activity, WEP encryption
Wireless activity, no security
No wireless activity, no security
Wireless client registration phase
WLAN disabled
Amber
Red
Red/green
Off
E-DOC-CTC-20080118-0051 v2.0
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Thomson Gateway Basics
Broadband/DSL LED
Name
Colour
State
Green
Blinking
Solid on
Pending DSL line synchronisation
DSL line synchronised
No DSL line
Off
Internet LED
Name
Colour
Blinking
Solid on
Solid on
State
Green
Internet activity
Internet connectivity, no activity
Internet connection setup failed
No Internet connection
Red
Off
Phone/Voice LED
Name
Colour
Solid on
Blinking
State
Green
VoIP service up
VoIP activity
VoIP service down
Off
Ethernet LED (Ethernet port)
A LED may be provided per Ethernet port to indicate link integrity (or activity).
LED Status
Off
Description
No connection on this port
Ethernet link up
Solid on
Blinking
Data is flowing from/to this port
E-DOC-CTC-20080118-0051 v2.0
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Thomson Gateway Basics
2.2 Thomson Gateway Web Interface
Introduction
browser.
Requirements
Javascript must be enabled on your browser.
Accessing the Thomson Gateway Web Interface
Proceed as follows:
1
2
3
Open your web browser.
Browse to http://dsldevice.lan or to the IP address of your Thomson Gateway (by default: 192.168.1.254).
If you have protected your Thomson Gateway with a user name and password, the Thomson Gateway
will prompt you to enter these. Enter your user name and password and click OK.
4
Interface using the Internet Gateway Device icon. For more information, see “4.3 Universal Plug and Play” on
E-DOC-CTC-20080118-0051 v2.0
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Thomson Gateway Basics
Components
2
3
4
1
5
6
Label
Description
1
2
3
4
5
6
Menu
The menu is located on the left side of the page and consists of the following menu items:
ꢀ
ꢀ
ꢀ
ꢀ
Thomson Gateway:
Provides basic information on the Thomson Gateway.
Broadband Connection:
Allows you to view/configure your broadband connections.
Toolbox:
Allows you to assign games or applications to a device and secure your Internet connection.
Home Network:
Allows you to manage your local network.
Language Bar
The language bar is located in the top banner and allows you to change the language of the Thomson
Gateway Web interface.
The language bar will only be shown if more than one language is available.
E-DOC-CTC-20080118-0051 v2.0
15
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Thomson Gateway Basics
Navigation Bar
The navigation bar is located at the top of the page and allows you to:
ꢀ
View the current user name.
Click this name to change your password or switch to another user.
ꢀ
ꢀ
ꢀ
View the current position on the Thomson Gateway Web interface.
Select change the display level of the page (for example: Overview, Details or Configure)
Get context-related Help information.
Notification Area
ꢀ
ꢀ
ꢀ
Error messages, indicated by a red traffic light.
Warnings, indicated by an orange traffic light.
Information, indicated by a green traffic light.
If none of these events occur, the notification area will not be shown.
Content pane
The content pane is located at the centre of the page and displays the information and configurable items of
the selected topic.
Tasks
To allow a quick configuration of your Thomson Gateway, some pages may offer you a number of related
tasks in the Pick a task list. These tasks will guide you to the page where you can perform the selected task.
E-DOC-CTC-20080118-0051 v2.0
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Thomson Gateway Basics
2.3 Backing Up/Restoring your Configuration
Introduction
Once you have configured your Thomson Gateway to your needs, it may be a good idea to save your
configuration for later use. This way you can always return to your working configuration in case of
problems.
Backing up your configuration
Proceed as follows:
1
2
3
4
5
6
On the Thomson Gateway menu, click Configuration.
In the Pick a task list, click Save or Restore Configuration.
Under Backup current configuration, click Backup Configuration Now.
The Thomson Gateway prompts you to save your file.
Save your file to a location of your choice.
Restoring your configuration
Proceed as follows:
1
2
3
4
5
6
On the Thomson Gateway menu, click Configuration.
In the Pick a task list, click Save or Restore Configuration.
Under Restore saved configuration, click Browse.
Open your backup file.
The Thomson Gateway restores your configuration.
E-DOC-CTC-20080118-0051 v2.0
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Thomson Gateway Basics
E-DOC-CTC-20080118-0051 v2.0
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adding New Devices to your Network
3.1 Adding a Computer to your Network
Guided Installation
computer that you want to add.
At a specific point in the installation, the Setup wizard will inform you that the Thomson Gateway has already
been configured:
Select No and click Next to continue.
Manual Installation
You can also manually add a new computer to your local network:
ꢀ
ꢀ
E-DOC-CTC-20080118-0051 v2.0
20
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adding New Devices to your Network
3.1.1 Connecting a computer using Wireless
Before you start
Before you can connect a computer to your wireless network you need to know which Network Name (SSID)
and encryption your Thomson Gateway is using.
Where can I find the SSID?
If you did not change the SSID manually, your Thomson Gateway uses the SSID that is printed on the bottom
panel label of your Thomson Gateway.
Where can I find the encryption?
You have not yet configured your Thomson Gateway
In this case, no encryption is used.
You have already configured your Thomson Gateway using the Guided Installation
If you choose to use the wireless settings proposed by the Setup wizard, you can find the encryption keys on
the label on the bottom of your Thomson Gateway:
Forgot your wireless settings?
If you have changed the wireless settings manually and you can’t remember your settings, try one of the
following:
If one of your computers is already connected to your network:
1
2
3
4
Browse to the Thomson Gateway Web Interface on a computer that is already connected to your network.
On the Home Network menu, click Wireless.
In the upper-right corner, click Details.
The wireless Access Point page appears. Under:
ꢁ
ꢁ
Configuration, you can find the network name (SSID).
Security, you can find the encryption.
If none of your computers is connected to your network, connect a computer using a wired connection and
follow the procedure above to find out what your wireless settings are.
Another option is to reset your Thomson Gateway and reconfigure it all over again. For more information,
Procedure
Proceed as follows:
1
2
Configure your computer with the same wireless settings as your Thomson Gateway. For more
information, consult the help of your wireless client.
If you enabled the access control list on the Thomson Gateway, you have to register your computer
before you can connect to the network. Access control is disabled by default.
E-DOC-CTC-20080118-0051 v2.0
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adding New Devices to your Network
3.1.2 Connecting a computer using Ethernet
Requirements
ꢀ
Your computer must have a free Ethernet port.
ꢀ
Your computer must be configured to obtain an IP address automatically. This is the default setting.
Procedure
Proceed as follows:
1
Connect one end of the (yellow) Ethernet cable to (one of the) yellow Ethernet port(s) of your Thomson
Gateway:
2
3
Connect the other end of the (yellow) Ethernet cable to your computer.
Your computer is now connected to your network. No additional configuration is needed.
E-DOC-CTC-20080118-0051 v2.0
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adding New Devices to your Network
3.2 Adding a Phone to your Network
Introduction
Depending on your Thomson Gateway, you can connect one or two analogue phones or faxes to the
Thomson Gateway.
Procedure
Before you can make a phone call over the Internet, you must:
1
2
Connect your phone to the Thomson Gateway.
Configure the telephone services on your Thomson Gateway.
After the Installation
E-DOC-CTC-20080118-0051 v2.0
23
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adding New Devices to your Network
3.2.1 Connecting Phones to the Thomson Gateway
Procedure
Use a phone cable with RJ-11 connectors to:
1
2
Wire the green Thomson Gateway Phone port(s) to your phone(s) or fax.
If your Thomson Gateway has a black port labelled "PSTN", you must connect this port to the telephone
output of your DSL splitter to allow analogue phone calls with the same telephone set that you use for
VoIP calls.
This is only required if you still want to make phone calls using the analogue telephone line.
Be aware that, if the PSTN port (if provided) is not wired to your telephone wall outlet or
distributed filter, emergency calls are not always possible!
As distributed filters are country-specific, you cannot use the device everywhere.
If this is not the case, no additional connections are needed.
Emergency calls
If the device is not powered, the Thomson Gateway will automatically select the analogue signal (if
connected). So you still will be able to make emergency calls.
E-DOC-CTC-20080118-0051 v2.0
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adding New Devices to your Network
3.2.2 Configuring your Thomson Gateway
Introduction
If you configured your Thomson Gateway using the Guided Installation, the telephony service will already be
configured by the Setup wizard.
If you choose to configure your Thomson Gateway manually or you still need to configure the telephony
service, you can follow the procedure below.
Procedure
Proceed as follows:
1
2
3
Your Internet connection must be up and running before you can configure Internet telephony.
Enable the Telephony Service
To enable the telephony service:
1
2
3
4
5
On the Toolbox menu, click Telephony.
Select Service Enabled.
Click Apply.
Assign Phone Numbers
To configure your Internet SIP telephone numbers:
1
2
3
On the Toolbox menu, click Telephony.
In the Navigation Bar, click Configure. Assign phone numbers to the ports. If you want to use the same
number for all ports, select Port ‘All’.
The phone numbers are provided by your provider.
4
Click Apply.
Configure the Telephony Service
Proceed as follows to configure the telephony service:
1
2
3
On the Toolbox menu, click Telephony.
E-DOC-CTC-20080118-0051 v2.0
25
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adding New Devices to your Network
4
5
Enter the IP address and the port number of the registrar, and the proxy, as provided by your ISP:
Click Apply.
Verifying Telephone Connectivity
Proceed as follows to verify the voice connection:
1
2
3
4
5
Make sure the Thomson Gateway is turned on and ready for service.
Check whether your phone is properly attached to the Thomson Gateway.
Make sure the Internet telephony service is enabled and configured.
The Voice LED must be solid green.
Pick up your phone, wait for the dialling tone, and dial the number. If you dial a ‘#’ after the phone
number, the phone number will be called instantly.
The phone(s) attached to the Thomson Gateway can receive incoming VoIP calls, as long as your
Thomson Gateway is turned on and the Voice LED is lit.
For calls over the analogue phone line, your phones are line-powered by the telephone company
and can therefore always be reached, even if the Thomson Gateway is turned off.
E-DOC-CTC-20080118-0051 v2.0
26
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adding New Devices to your Network
3.2.3 Multiple Identities
Introduction
You can assign up to three Internet telephone numbers or URIs to one or both phone ports, or you can assign
a common number to both phone ports.
The phone numbers are provided by your provider.
Procedure
Proceed as follows:
1
2
3
4
5
6
7
8
Browse to the Thomson Gateway web pages.
On the Toolbox menu, click Telephony.
In the Pick a task list, click Use multiple identities.
Click Add.
Enter another URI, your user name and password.
Choose the phone port for which you want to use this telephone number.
Click Apply.
E-DOC-CTC-20080118-0051 v2.0
27
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Adding New Devices to your Network
E-DOC-CTC-20080118-0051 v2.0
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4 Getting the Most Out of Your Thomson Gateway
In this chapter
In this chapter we will take a closer look at following features:
Topic
Page
Feature availability
Depending on the configuration offered by your Internet Service Provider (ISP), some features may not be
available on your Thomson Gateway. For more information, contact your ISP.
E-DOC-CTC-20080118-0051 v2.0
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.1 Sharing Content on your Network
Introduction
The Thomson Gateway allows you to store your data on a centralised place in the network. This way you can
share your files with everyone that is connected to your network.
What do I need?
A FAT32 formatted USB storage device.
To format your device for FAT32, consult the help of your operating system. Make sure to make a
copy of your data before you doing this. Formatting your device will erase all data.
Procedure
Proceed as follows:
1
2
Connect your USB storage device to the Thomson Gateway
Plug your USB memory stick or external hard disk in (one of) the USB master port(s) of your Thomson
Gateway.
E-DOC-CTC-20080118-0051 v2.0
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
Configure Content Sharing on the Thomson Gateway
If you want to:
ꢀ
Simply share your data and media with other users on the network, proceed with “4.1.1 Setting Up the
ꢀ
Share your media with media devices like an IP Set-Top Box, proceed with “4.1.3 Using UPnP AV to Share
E-DOC-CTC-20080118-0051 v2.0
31
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.1.1 Setting Up the File Server
Introduction
If you want to allow users to change the content on your USB storage device, you have to enable the
Network File Server on your Thomson Gateway. This way, all users connected to your Thomson Gateway
will be able to access your USB storage device and make changes to it.
Procedure
To enable the Network File Server:
1
2
3
4
On the Tools menu, click Content Sharing.
Under Network File Server (Windows Networking), click Server Enabled. It is also recommended to
complete in following fields:
ꢁ
Server Name:
You will use this name to access the Thomson Gateway. If you leave this field empty you can only
access your USB storage device by entering the IP address (by default: 192.168.1.253)
ꢁ
ꢁ
Server Description:
Here you can add a short description for what kind of data is stored on the USB storage device.
Workgroup:
Enter the same workgroup as your computer(s).
5
6
Click Apply.
All users connected to the Thomson Gateway can now connect to your SUB storage device. If you want
to limit the number of folders users can access, continue with “4.1.2 Managing your Shared Content” on
7
If your computer runs:
ꢁ
ꢁ
Mac, continue with How to access the shared content on Mac
E-DOC-CTC-20080118-0051 v2.0
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
How to access the shared content on Windows
Proceed as follows:
1
2
Open Windows Explorer.
In the address bar type two backslashes followed by the name that you entered in the Server Name box
(in our example: \\Thomson).
If you did not provide a server name, type \\192.168.1.253.
3
All storage devices that are attached to your Thomson Gateway are listed as folders.
If the storage device has multiple partitions an index number will be added at the end (for example:
Disk_a1 and Disk_a2).
If the partition is a managed partition, the Media and Shared folders will be displayed instead:
4
If you plan to frequently use this folder, it might be useful to map this folder as a network drive. For more
information, see your operating system’s help.
E-DOC-CTC-20080118-0051 v2.0
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
How to access the shared content on Mac
Proceed as follows:
1
2
3
On the Go menu, click Connect To Server.
The Connect To Server window appears.
In the Server Address box, type smb://<server name>, where <server name> is the Server Name you
assigned to your USB storage device. So in our example we will type smb://Thomson.
4
The SMB Mount window appears.
Select the shared folder you want to mount and click OK.
5
6
The SMB/CIFS Filesystem Authentication window appears. You do not need to authenticate, click OK.
Your USB storage device is now mounted and is displayed on your desktop.
E-DOC-CTC-20080118-0051 v2.0
34
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.1.2 Managing your Shared Content
Introduction
To prevent that users start creating folders on your USB storage device and to keep the directory structure
clean and transparent, the Thomson Gateway allows you to configure your USB storage device as Managed
Managed Partition
If you select your drive or partition as managed partition, users will only be able to access following folders:
ꢀ
ꢀ
Media
Shared
All other folders will be hidden from the user. If you connected more than one USB storage device, those
device will be hidden.
If these folders are not on your USB storage device. The Thomson Gateway will create them automatically.
Procedure
Proceed as follows:
1
2
3
4
On the Tools menu, click Content Sharing.
Under List of connected disks, click the radio button next to the partition you want to configure as
5
Click Apply.
Result
The Thomson Gateway creates following folders:
ꢀ
Media:
Use this folder to share your media files with others users on your network. You can store your media
files in following subfolders:
ꢁ
ꢁ
ꢁ
Movies
Music
Pictures
ꢀ
Shared:
Use this folder to share your data with other users. Optionally, users can also access this folder using FTP.
If the above folders are already exist, the existing folders are used.
E-DOC-CTC-20080118-0051 v2.0
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.1.3 Using UPnP AV to Share Content with Media Devices
Introduction
If you want to share your media files with media devices like IP Set-Top Boxes, you have to configure the
Thomson UPnP AV Server
The Thomson UPnP AV Server is a server that shares media files with devices that are connected to the same
network. These media files are stored on a USB storage device connected to the Thomson Gateway.
Procedure
Proceed as follows:
1
2
Enable UPnP AV on the Thomson Gateway
Proceed as follows:
1
2
3
4
On the Tools menu, click Content Sharing.
Under UPnP AV Media Server, click Server Enabled.
Select your USB storage device as managed partition
Proceed as follows:
1
2
Under List of connected disks, click the radio button next to the partition of which you want to share the
media files.
Click Apply.
E-DOC-CTC-20080118-0051 v2.0
36
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.1.4 Accessing your Shared Content by FTP
Introduction
The Thomson Gateway allows you to access your shared content by FTP. This can be useful if you want to be
able to access your shared content from the Internet.
Procedure
Proceed as follows:
1
2
If you have already configured a password for your login account, you can continue with the next step.
If your login account is not yet configured with a password:
1
2
3
4
5
On the Toolbox menu, click User Management.
In the Pick a task list, click Change my password.
Leave the Old Password box empty.
Type your new password both in the New Password box and Confirm New Password box.
Configure FTP access for your shared content
Proceed as follows:
1
2
3
4
5
On the Tools menu, click Content Sharing.
Under FTP Server, click Server Enabled.
Under List of connected disks, click the radio button next to the partition that you want to access using
FTP.
6
7
The Thomson Gateway now creates a Media and Shared folder on the selected partition. The Shared
folder will be used as root location for FTP sessions.
Click Apply.
E-DOC-CTC-20080118-0051 v2.0
37
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
Result
The Shared folder is now accessible using FTP. If you are connected to the Internet, the link to the FTP server
is displayed under FTP Server:
On the Thomson Gateway network, you can also FTP to the local address (192.168.1.253).
Additional configuration
As you may know the IP address of your Internet connection changes frequently. This implies that the link to
the FTP server will also change every time the public IP changes. With Dynamic DNS, you can assign a host
name to the IP address (for example mygateway.dyndns.org). For more information, see “4.5 Dynamic DNS”
E-DOC-CTC-20080118-0051 v2.0
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.2.1 Address Book
Introduction
The Thomson Gateway allows you to store the contact details of your contacts on the Thomson Gateway
Web Interface. On this page, you can make a call or send a message simply by clicking on a link.
Accessing the Address Book page?
Proceed as follows:
1
2
3
On the Toolbox menu, click Address Book.
The Address Book page appears.
Managing contacts
To:
ꢀ
ꢀ
ꢀ
Add a contact, click Add.
Edit a contact, click Edit.
Delete a contact, click Delete.
All information provided per contact is optional except for the Last and First Name, and can be updated or
completed at any time.
The Address book resides on the Thomson Gateway, so everyone with access to the Thomson
Gateway web interface can view and use the Address book.
Using the Address book
The contact details of a contact in your Address book allow you to directly make a call or send a message
from out the Thomson Gateway web interface.
Per contact you can click (if available):
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Business: to make a call to the contact’s business telephone number
Home: to make a call to the contacts home telephone number
Mobile: to make a call to the contact’s mobile telephone number
Other or SIP uri: to make a call to the contact’s VoIP telephone number
E-mail: for sending an E-mail message to the contact with your e-mail client.
E-DOC-CTC-20080118-0051 v2.0
40
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.2.2 Telephony services
Introduction
Telephony services or supplementary services add extra functionality to your phone. Which supplementary
services that are available is determined by your service provider.
To following list gives an overview of the services that may be available:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
3pty: three party call
Callreturn: to call back the last missed call
Ccbs: call completion on busy subscriber (automatic callback)
Cfbs: call forwarding on busy
Cfnr: call forwarding on no reply
Cfu: call forwarding unconditional
Clip: calling line identification presentation
Clir: calling line identification restriction
Clironcall: clir for only one call
ForcedFXO: switch to FXO (PSTN)
Hold: put an active call on hold
Mwi: message waiting indication
Transfer: call transfer between local ports
Waiting: incoming call while active call indication
Waitingoncall: call waiting active for only one call.
Checking which services that you can use?
To check which services you can use:
1
2
3
4
5
On the Tools menu, click Content Sharing.
In the Pick a task list, click View Telephony Services.
Under Telephony Services, you can see the services that are supported by your provider.
Activating services
You can activate/deactivate supplementary services in two ways:
ꢀ
ꢀ
Via activation/deactivation codes, also referred to as service code commands.
Via the Telephony Configure page.
The activation/deactivation codes for a specific supplementary service is displayed in the overview.
For example, to activate Call Hold dial *94, to deactivate the service dial #94.
E-DOC-CTC-20080118-0051 v2.0
41
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
Activating services on the web pages
To activate/deactivate supplementary services via the web page:
1
2
3
4
5
6
7
On the Tools menu, click Content Sharing.
In the Pick a task list, click View Telephony Services.
To activate/ deactivate supplementary services select/clear the check box of the supplementary service.
Click Apply.
Call Forwarding
Call Forwarding informs you about the call forwarding parameters:
ꢀ
ꢀ
ꢀ
ꢀ
CFNR-timer or Call Forwarding on No Reply timer is the time expressed in seconds after which an
incoming call is forwarded when not answered.
CFNR-destination or Call Forwarding on No Reply destination is the telephone number to which a call is
forwarded to when the CFNR-timer expires.
CFU-destination or Call Forwarding Unconditional is the telephone number to which an incoming call is
always forwarded to.
CFBS-destination or Call Forwarding on Busy Subscriber is the telephone number to which an incoming
call is forwarded to when your telephone is busy.
Using switching order commands
In order to use switching order commands (R or hook flash followed by a digit), certain supplementary
services have to be activated.
The following list gives an overview of the supplementary services that have to be activated in order to use
switching order commands (SOC):
ꢀ
Activate Hold when you want to
Action
Press
Illustration
To put an active call on hold and enable a
call set up (the dial tone is generated)
R, 2
B
C
dial tone
C
B
C
A presses
R2
on hold
active
A
A
A
A
To terminate the call on hold
R, 0
R, 1
B
B
C
A presses
R0
active
active
on hold
A
A
To terminate an active call and switch to
the call on hold
B
C
B
C
A presses
R1
active
active
on hold
E-DOC-CTC-20080118-0051 v2.0
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
Action
Press
Illustration
To retrieve the call on hold (when there is
no active call)
R, 1
B
C
B
C
A presses
R1
active
on hold
A
A
A
To terminate an active call and enables a
call set up (the dial tone is generated)
R, 9
B
C
B
C
A presses
R9
on hold
active
on hold
dial tone
ꢀ
Activate Waiting when you want to:
Action
Press
Illustration
To terminate an active call and switch to an
incoming call
R, 1
B
C
B
C
A presses
R1
active
active
incoming
A
A
To reject an incoming call
R, 0
R, 2
R, 2
B
C
B
C
A presses
R0
active
active
incoming
A
A
A
A
A
A
To switch between an active call and a call
on hold
B
C
B
C
A presses
R2
on hold
active
active
on hold
To switch between an active call and an
incoming call
B
C
B
C
A presses
R2
on hold
active
active
incoming
ꢀ
Activate 3 PTY when you want to:
Action
Press
Illustration
To establish a conference call (or 3 party
connection)
R, 3
B
C
B
C
A presses
R3
active
active
on hold
active
A
A
A
A
During 3 pty: put B and C on hold
R, 2
B
C
B
C
A presses
R2
on hold
on hold
active
active
E-DOC-CTC-20080118-0051 v2.0
43
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
Action
Press
Illustration
During 3 pty: retrieve B and C
R, 3
B
C
B
C
A presses
R3
active
active
on hold
on hold
A
A
ꢀ
Activate Transfer when you want to:
Action
Press
Illustration
Transfer a call
R, 4
B
C
B
C
active
A presses
R4
on hold
active
A
A
ꢀ
Activate CCBS when you want to set up a call to a busy subscriber (Press R, 5).
E-DOC-CTC-20080118-0051 v2.0
44
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.2.3 Viewing Telephony Statistics
Introduction
ꢀ
ꢀ
ꢀ
ꢀ
Successful incoming calls.
Missed incoming calls.
Successful outgoing calls.
Failed outgoing calls.
Accessing the Telephony Statistics page
Proceed as follows:
1
2
3
On the Toolbox menu, click Telephony.
The Address Book page appears.
Call Statistics
The Call Statistics page shows you the number of:
ꢀ
ꢀ
ꢀ
ꢀ
Successful incoming calls.
Missed incoming calls.
Successful outgoing calls.
Failed outgoing calls.
for each phones separately and combined.
E-DOC-CTC-20080118-0051 v2.0
45
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.3 Universal Plug and Play
Introduction
UPnP is designed to automate the installation and configuration of a (small) network as much as possible.
This means that UPnP-capable devices can join and leave a network without any effort of a network
administrator.
Supported Operating Systems
Following operating systems support UPnP:
ꢀ
ꢀ
Windows Vista
Windows XP
If your computer is running Windows XP, you first have to install the UPnP component. For more
UPnP and the Thomson Gateway
With UPnP you can:
ꢀ
ꢀ
ꢀ
Automatic port configuration for UPnP-enabled games and applications. You do not have to create port to
run services on a computer. If the application is UPnP-enabled, UPnP will create these entries
E-DOC-CTC-20080118-0051 v2.0
46
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.3.1 Accessing Your Thomson Gateway with UPnP
Windows Vista
If you computer runs Windows Vista:
1
2
On the Windows Start menu, click Network.
The Network window appears:
3
4
Right-click your Thomson Gateway (displayed as THOMSON TGXXX) and click View device web page.
Windows XP
If you computer runs Windows XP:
1
2
Go to My Network Places.
The My Network Places window appears:
3
4
Double-click your Thomson Gateway (displayed as THOMSON TGXXX).
E-DOC-CTC-20080118-0051 v2.0
47
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.3.2 Managing your Internet connection with UPnP
Windows Vista
If you computer runs Windows Vista:
1
2
On the Windows Start menu, click Network.
The Network window appears:
3
4
Right-click your Thomson Gateway (displayed as THOMSON TGXXX).
If you are currently:
ꢁ
ꢁ
Connected to the Internet, click Disable to disconnect from the Internet.
Not connected to the Internet, click Enable to connect to the Internet.
Windows XP
Proceed as follows:
1
2
On the Windows Start menu, click (Settings >) Control Panel.
The Control Panel window appears.
Click (Network and Internet Connections) > Internet Connections.
3
The Network Connections window appears;
4
If you right-click the Internet Connection icon, you can connect/disconnect your connection to the
Internet.
E-DOC-CTC-20080118-0051 v2.0
48
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
Disabling this feature
To prevent that users can connect/disconnect you can enable Extended Security. For more information, see
E-DOC-CTC-20080118-0051 v2.0
49
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.3.3 Configuring UPnP on the Thomson Gateway
Introduction
ꢀ
ꢀ
Enable/Disable UPnP
Proceed as follows:
1
2
3
On the Toolbox menu, click Game & Application Sharing.
Under Universal Plug and Play:
ꢁ
ꢁ
Select the Use UPnP check box, to enable UPnP.
Clear the Use UPnP check box, to disable UPnP.
4
Click Apply.
Extended Security
If Extended Security is enable only limited UPnP operation between the host and the Thomson Gateway is
allowed. A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You
Enabling Extended Security
Proceed as follows:
1
2
3
4
On the Toolbox menu, click Game & Application Sharing.
Under Universal Plug and Play, select Use Extended Security.
Click Apply.
E-DOC-CTC-20080118-0051 v2.0
50
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.3.4 Installing UPnP on Windows XP
Adding UPnP
If you are running Microsoft Windows XP, it is recommended to add the UPnP component to your system.
Proceed as follows:
1
2
In the Start menu, click (Settings >) Control Panel.
The Control Panel window appears.
Click Add or Remove Programs.
3
4
The Add or Remove Programs window appears.
Click Add/Remove Windows Components.
The Windows Components Wizard appears:
In the Components list, select Networking Services and click Details
5
The Networking Services window appears:
Select Universal Plug and Play or UPnP User Interface and click OK.
6
7
Click Next to start the installation and follow the instructions in the Windows Components Wizard.
At the end of the procedure the Wizard informs you that the installation was successful. Click Finish to
quit.
E-DOC-CTC-20080118-0051 v2.0
51
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
Adding IGD Discovery and Control
Your Windows XP system is able to discover and control Internet Gateway Devices (IGD), like the Thomson
Gateway on your local network. Therefore, it is recommended to add the IGD Discovery and Control client to
your system.
Proceed as follows:
1
2
3
4
On the Windows taskbar, click Start.
Select (Settings >) Control Panel > Add or Remove Programs.
In the Add or Remove Programs window, click Add/Remove Windows Components.
The Windows Components Wizard appears:
Select Networking Services in the Components list and click Details.
5
The Networking Services window appears:
Select Internet Gateway Device Discovery and Control Client and click OK.
6
7
Click Next to start the installation and follow the instructions in the Windows Components Wizard.
At the end of the procedure, the Wizard informs you that the installation was successful. Click Finish to
quit.
E-DOC-CTC-20080118-0051 v2.0
52
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.4 Assigning a service (HTTP, FTP,...) to a computer
Introduction
The Thomson Gateway allows you to use one internet connection for multiple computers. This means that all
your computers share one public IP address, as if only one computer is connected to the outside world.
Problem
When the Thomson Gateway receives an incoming message, the Thomson Gateway has to decide to which
computer he will have to send this message.
If the incoming message is a response to an outgoing message originating from one of your computers, the
Thomson Gateway sends the incoming message to this computer.
Internet
If your are running a server or an application that acts as a server (for example a HTTP server, internet game),
the initial message will come from the internet and the Thomson Gateway has to decide to which computer
he should forward the incoming message.
?
Internet
Solution
To avoid this problem you can:
ꢀ
ꢀ
E-DOC-CTC-20080118-0051 v2.0
53
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
UPnP
UPnP is a technology that enables seamless operation of a wide range of games and messaging applications.
Your computer will use UPnP to communicate to the Thomson Gateway which services are running on the
computer.
Assign a game or application to a local networking device
If you assign a game or application to a local networking device, you will basically tell the Thomson Gateway
that if it receives requests for a specific game or application, it has to forward these messages to a specific
computer.
Proceed as follows to do so:
1
2
3
4
On the Toolbox menu, click Game & Application Sharing.
In the Pick a task list, click Assign a game or application to a local network device.
In the Game or application list, click the service you want to run on the computer. For example, HTTP
Server (World Wide Web).
If the service is not available in the list, click Create a new game or application in the Pick a task
5
6
In the Device, list select the computer to which you want to assign the service. Your computer will be
listed with it’s computer name.
All incoming request for the selected service will now be directed to the selected device. The Thomson
Gateway will also configure the Thomson Gateway firewall to allow this service.
E-DOC-CTC-20080118-0051 v2.0
54
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
4.5 Dynamic DNS
Introduction
The Dynamic DNS service allows you to assign a dynamic DNS host name (for example john.dyndns.org) to
a broadband connection even if it is using a dynamic IP address. As soon as the device gets a new IP address,
the dynamic DNS server updates its entry to the new IP address.
What you need
Before we can configure Dynamic DNS, you first have to create an account at one of the following Dynamic
DNS service providers:
ꢀ
ꢀ
ꢀ
Procedure
Proceed as follows:
1
2
3
4
5
On the Toolbox menu, click Dynamic DNS.
Select the Enabled check box.
If necessary, select the broadband connection to which you want to assign the Dynamic DNS host name
in the Interface list.
6
7
8
Type the user name and password of your Dynamic DNS service account in the corresponding fields.
In the Service list, click the name of your Dynamic DNS service provider.
In the Host box, type the host name that you got from the Dynamic DNS service provider (for example
mywebpage.dyndns.org).
9
Click Apply.
E-DOC-CTC-20080118-0051 v2.0
55
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Getting the Most Out of Your Thomson Gateway
E-DOC-CTC-20080118-0051 v2.0
56
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Wireless Security
5 Wireless Security
Methods
The Thomson Gateway offers you following tools to protect your wireless network from intruders:
ꢀ
ꢀ
ꢀ
As you will find out in the following sections, not all of these security measures are hard to crack. But all
together it may discourage some hackers to break into you network.
E-DOC-CTC-20080118-0051 v2.0
57
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Wireless Security
5.1 Encryption
Introduction
By using encryption, communication between the wireless clients and your Thomson Gateway is protected
by a passphrase. Only clients which use the correct network name (SSID) and passphrase can connect to your
network.
Encryption methods
During the years a number of encryption types have been developed. The list below gives you an overview of
the supported encryption types ordered by security level, you will find the highest level of security at the top
of the list:
ꢀ
WPA-PSK Encryption:
The wireless data is being encrypted with a user-defined key. Wireless clients must be configured with
this key before they can connect to the Thomson Gateway.
ꢀ
WEP Encryption:
The first encryption type used for wireless connections. Like WPA-PSK it uses a user-defined key, but WEP
has been proven to have some security issues. We strongly recommend you to use WPA-PSK instead.
Configuring the wireless encryption
Proceed as follows:
1
2
3
On the left menu, click Home Network.
Under Wireless, click your access point.
Your access point will be listed in the following format: “WLAN:<Network Name> (<Actual
Speed>)”. For example, WLAN: Thomson83C7C7 (54Mbps).
4
5
6
The Wireless Access Point page appears.
Under Security, you can change the Encryption. If you want to use:
ꢁ
ꢁ
E-DOC-CTC-20080118-0051 v2.0
58
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Wireless Security
5.1.1 Configuring WEP Encryption
Procedure
1
2
3
Select Use WEP Encryption
In the WEP Key Length list, click the desired key length (a higher key length offers higher security).
In the Encryption key box, type a Network key of your choice. If you are using:
ꢁ
A 64-bit key:
Type 10 hexadecimal characters (characters from 0 to 9 and from A to F) or 5 alphanumeric
characters.
ꢁ
A 128-bit key:
Type 26 hexadecimal characters (characters from 0 to 9 and from A to F) or 13 alphanumeric
characters.
4
5
Click Apply.
Configure your wireless client(s) with the same settings.
E-DOC-CTC-20080118-0051 v2.0
59
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Wireless Security
5.1.2 Configuring WPA-PSK Encryption
Procedure
1
2
Select Use WPA-PSK Encryption.
In the WPA-PSK Encryption Key box, type a pass phrase (also known as Pre-shared key) of your choice.
The pass phrase must consist of 8 to 63 alphanumeric characters or 64 hexadecimal characters
(characters from 0 to 9 and from A to F).
3
In the WPA-PSK Version list, click the WPA-version of your choice. Following options are available:
ꢁ
WPA2:
WPA2 is the most secure version, but not all wireless clients already support it. Before you select this
version, make sure all of your wireless clients support it.
ꢁ
WPA+WPA2:
If not all of your wireless clients support WPA2 or you are not sure if they support WPA2, we
recommend you to choose WPA+WPA2. Wireless clients that support WPA2 will use WPA2, the
others will use WPA.
ꢁ
WPA:
If none of your wireless clients support WPA2 choose this option.
To use WPA2 on Windows XP SP2 you first have to install Wi-Fi Protected Access 2 (WPA2)/
Wireless Provisioning Services Information Element (WPS IE) update. You can find this update
4
5
Click Apply.
Configure your wireless client(s) with the same settings.
E-DOC-CTC-20080118-0051 v2.0
60
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Wireless Security
5.2 Access Control
What is access control?
Every network device carries a unique hexadecimal code (MAC address). Access control enables you to
allow/deny access to wireless clients based on their MAC address.
Drawbacks
ꢀ
MAC authentication is linked to the user’s hardware and not to his identity.
You can easily change the MAC address of your wireless clients.
ꢀ
How can I configure this on the Thomson Gateway?
Proceed as follows:
1
2
3
On the left menu, click Home Network.
Under Wireless, click your access point.
Your access point will be listed in the following format: “WLAN:<Network Name> (<Actual
Speed>)”. For example, WLAN: Thomson83C7C7 (54Mbps).
4
5
6
The Wireless Access Point page appears.
Under Security, you can set the Allow New Devices property to:
ꢁ
ꢁ
ꢁ
7
Select the option of your choice and click Apply.
New stations are allowed (automatically)
Access control is disabled. All wireless client can connect if they use the correct SSID and encryption.
New stations are allowed (via registration)
Access Control is enabled. To add new wireless clients to the access control list, you have to search for new
wireless devices using the:
ꢀ
ꢀ
Registration button on the front panel of your Thomson Gateway.
E-DOC-CTC-20080118-0051 v2.0
61
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Wireless Security
New stations are not allowed
Access Control is enabled. You can only add your wireless devices to the access control list using the Search
Search for wireless devices task
To add new wireless devices to the access control list:
1
2
3
4
On the Home Network menu, click Devices.
In the Pick a task list, click Search for wireless devices.
The Thomson Gateway is now in registering mode and will add all devices that use the correct SSID and
encryption to the access control list. During this phase the WLAN LED colour will switch between red and
green.
5
Your new wireless clients should now be connected to the Thomson Gateway.
E-DOC-CTC-20080118-0051 v2.0
62
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Wireless Security
Registering Clients via the Association Button
Proceed as follows to register new wireless network clients via the association button:
1
Push the Registration button on the Thomson Gateway front panel and hold it for at least two seconds.
2
3
The WLAN LED toggles between green and red.
The Thomson Gateway unlocks the Access Control List for one minute. Wireless clients configured with
the correct wireless settings that try to connect to the Thomson Gateway will be added to the list of
allowed devices.
Some wireless clients do not automatically join a wireless network. If that is the case, follow
the instructions for the wireless client software to initiate the association.
4
5
Depending on your wireless client adapter, a wireless icon may become green or a message similar to
the following may appear: “Successfully joined Wireless network Thomson123456”.
After one minute, the Thomson Gateway locks the Access Control List again.
The registration procedure can be repeated as often as needed.
E-DOC-CTC-20080118-0051 v2.0
63
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Wireless Security
5.3 Disabling SSID Broadcast
What does this mean?
Access points broadcast their Network Name (SSID) to announce themselves to the wireless stations and
other access points. Wireless clients will make a list of these access points and show them to the user. The
user can then select his wireless client and try to connect to this access point.
By disabling the SSID broadcasting, your access point will no longer be available in those lists. Users will
have to enter the Network Name manually if they want to connect to your wireless network.
Security
This was the first method to secure a WLAN, because you have to know the Network Name in order to access
the wireless network. With the correct tools, hackers can still find out which SSID you are using. But you can
see it as a first step in discouraging them to try and break in to your wireless network.
Procedure
To disable SSID broadcast, proceed as follows:
1
2
3
4
5
Under Home Network, click Wireless.
The Wireless Access Point page appears.
Under Security, clear the Broadcast Network Name check box.
E-DOC-CTC-20080118-0051 v2.0
64
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Internet Security
6.1 Firewall
Changing the security level
Proceed as follows:
1
2
3
4
5
On the Toolbox menu, click Firewall.
The Firewall page appears. In the upper-right corner, click Configure.
A list with security settings with a brief description is displayed.
Select the security level of your choice and click Apply.
Creating a new security level
If you do not find a security level up to your need, you are able to create a new security level.
This feature is intended for advanced users only.
Proceed as follows:
1
2
3
4
5
6
7
In the Toolbox menu, click Firewall.
In the upper right corner, click Configure.
In the Pick a task list, click Create a new Security Level.
In the Name box, type a name for the new security level.
In the Clone from existing Security Levels list, click the security level you want to start from.
Click Apply.
You can now make the necessary changes to the security level.
E-DOC-CTC-20080118-0051 v2.0
66
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Internet Security
6.2 Web site Filtering
Introduction
Web site filtering allows you to restrict access to specific web sites.
Strategies
There are two strategies you can follow:
ꢀ
Allow access to all web sites and manually specify which web sites may not be accessed.
- or -
ꢀ
Deny access to all web site and manually specify a number of web sites that may be accessed.
Procedure
Proceed as follows:
1
2
Enable Web site filtering and specify a default action
Proceed as follows:
1
2
3
4
5
6
On the Toolbox menu, click Web Site Filtering.
Select the Use Address Based Filter check box.
In the Action for Unknown Sites, select the action you want to use by default.
Click Apply.
Configure the exceptions
You can now:
ꢀ
ꢀ
ꢀ
ꢀ
E-DOC-CTC-20080118-0051 v2.0
67
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Internet Security
6.2.1 Denying access to a specific Web site
Use cases
Use this feature if:
ꢀ
ꢀ
Allow is selected under Action for Unknown Sites and you want to make an exception for a specific site.
Block is selected under Action for Unknown Sites and you want to make an exception on an allow rule.
For example: you are allowing “provider.com” but you want to block access to “mail.provider.com”.
Procedure
Proceed as follows:
1
2
3
4
5
On the Toolbox menu, click Web Site Filtering.
Select the Use Address Based Filter check box.
Type the URL of the Web site you want to block (for example “mail.provider.com”) in the Web Site box.
In the Action list, click:
ꢁ
ꢁ
Block if you want to block this Web site.
Redirect if you want to redirect to another page. Type the address of the redirect page in the Redirect
box.
6
Click Add.
E-DOC-CTC-20080118-0051 v2.0
68
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Internet Security
6.2.2 Allowing access to a specific Web site
Use cases
Use this feature if:
ꢀ
ꢀ
Block is selected under Action for Unknown Sites and you want to make an exception for a specific site.
Allow is selected under Action for Unknown Sites and you want to make an exception on a block/redirect
rule. For example: you are blocking “bank.com” but you want to allow access to “netbanking.bank.com”.
Procedure
Proceed as follows:
1
Type the URL of the Web site you want to allow (for example “netbanking.bank.com”) in the Web Site
box.
2
3
Click Allow in the Action list.
Click Add.
E-DOC-CTC-20080118-0051 v2.0
69
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Internet Security
6.2.3 Redirecting a Web site
Procedure
Proceed as follows:
1
2
3
Type the URL of the Web site you want to redirect (for example “cracks.am”) in the Web Site box.
Click Redirect in the Action list.
Type the URL of the Web site you want to redirect to (for example “mycompany.com/internetpolicy.htm”)
in the Redirect box.
4
Click Add.
E-DOC-CTC-20080118-0051 v2.0
70
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Internet Security
6.2.4 Redirecting all Web sites
Procedure
Proceed as follows:
1
2
3
Type “*” in the Web Site box.
Click Redirect in the Action list.
Type the URL of the Web site you want to redirect to (for example “mycompany.com/internetpolicy.htm”)
in the Redirect box.
4
5
Click Add.
Type the URL of the Web site you want to redirect to (for example “mycompany.com/internetpolicy.htm”)
in the Web Site box.
6
7
Click Allow in the Action list.
Click Add.
E-DOC-CTC-20080118-0051 v2.0
71
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Internet Security
E-DOC-CTC-20080118-0051 v2.0
72
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Troubleshooting
7 Troubleshooting
Introduction
This chapter suggest solutions for problems you may encounter while installing or configuring your
Thomson Gateway.
If the suggestions do not resolve the problem, look at the support pages on http://www.thomson-
broadband.com or contact your service provider.
For Internet connection troubleshooting, refer to the provided Installation and Setup Guide.
Topics
In this chapter:
ꢀ
ꢀ
ꢀ
E-DOC-CTC-20080118-0051 v2.0
73
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Troubleshooting
7.1 Setup wizard Troubleshooting
The Setup CD does not start automatically
If your computer runs:
ꢀ
Microsoft Windows:
1
2
3
Click the Windows Start button.
Click Run.
In the Open field, type the following path: D:\Setup.exe, where D stands for the drive letter of your
CD- or DVD-ROM drive.
ꢀ
Mac OS X:
1
2
On your desktop, double-click the CD icon.
Double-click Menu.
Your Thomson Gateway has not been found
If you see this error during setup, check whether:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
The Thomson Gateway is turned on and fully initialized.
Your computer has a valid IP address, that is any address but 0.0.0.0.
No dedicated firewall device or router is placed between your computer and the Thomson Gateway.
No personal network security software (for example firewall software) is running on your computer.
Your computer is correctly connected to the Thomson Gateway
E-DOC-CTC-20080118-0051 v2.0
74
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Troubleshooting
7.2 General Thomson Gateway Troubleshooting
Thomson Gateway does not work
If none of the LEDs light up, make sure that:
ꢀ
ꢀ
The Thomson Gateway is plugged into a power socket outlet.
You are using the correct power supply for your Thomson Gateway device.
The power requirements for your Thomson Gateway are clearly indicated on the identification
label on the bottom of the Thomson Gateway. Only use the power adaptor supplied with your
Thomson Gateway.
ꢀ
The Thomson Gateway is turned on via the push button or rocker switch on the back panel.
Thomson Gateway unreachable
If your Thomson Gateway cannot be reached due to misconfiguration, you might consider a hardware reset
Poor Thomson Gateway performance
Make sure that the Thomson Gateway is installed and configured as instructed in “1 Installation” on page 3
or as instructed by the Service Provider.
E-DOC-CTC-20080118-0051 v2.0
75
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Troubleshooting
7.2.1 Wired Connection Troubleshooting
LAN LED does not light up
Make sure that:
ꢀ
ꢀ
The LAN cable is securely connected to the 10/100Base-T port.
You are using the correct cable type for your Ethernet equipment, that is UTP CAT5 with RJ-45
connectors.
E-DOC-CTC-20080118-0051 v2.0
76
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Troubleshooting
7.2.2 Wireless Connection Troubleshooting
Not Able to Connect Wireless Clients
Check the following:
ꢀ
If registration is enabled, you must press the 'Association' button to register the wireless client or search
for wireless devices via the embedded web pages.
ꢀ
Make sure the Thomson Gateway Association Control List is not locked. You can check this on the web
pages. On the Wireless Access Point settings, make sure New stations are not allowed is NOT selected.
No Wireless Connectivity
Make sure that:
ꢀ
Both the wireless client adapter and the Thomson Gateway are allowed to connect through wireless
channels as defined for local regulatory domain.
ꢀ
ꢀ
The wireless client is configured for the correct wireless settings (SSID, security settings).
Check the signal strength, indicated by the wireless client manager. If the signal is low, try repositioning
the Thomson Gateway or directing the Thomson Gateway’s antenna(s) for optimal performance.
ꢀ
Make sure that the wireless client adapter is enabled (message like “radio on”).
Poor Wireless Connectivity or Range
Try the following:
ꢀ
ꢀ
Make sure both the wireless client adapter and the Thomson Gateway are allowed to connect through
wireless channels as defined for local regulatory domain.
ꢀ
ꢀ
Check the location of the Thomson Gateway in the building.
Check the signal strength, indicated by the wireless client manager. If the signal is low, try to place the
Thomson Gateway or to direct the Thomson Gateway’s antenna(s) for optimal performance.
Change the wireless channel
Proceed as follows:
1
2
3
On the left menu, click Home Network.
Under Wireless, click your access point.
Your access point will be listed in the following format: “WLAN:<Network Name> (<Actual
Speed>)”. For example, WLAN: Thomson83C7C7 (54Mbps).
4
5
6
7
The Wireless Access Point page appears.
Under Configuration, select the channel of your choice in the Channel Selection list.
Click Apply.
E-DOC-CTC-20080118-0051 v2.0
77
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Troubleshooting
7.3 Voice over IP Troubleshooting
Introduction
If you cannot establish a phone call via your Thomson Gateway, try the suggestions below.
Calling over VoIP
If you have problems calling via VoIP, check whether:
ꢀ
ꢀ
Your telephone is correctly connected to the Thomson Gateway.
Your telephone is working on the PSTN network:
ꢁ
ꢁ
Connect your phone directly to PSTN (not via the Thomson Gateway).
Try to make a phone call.
ꢀ
ꢀ
ꢀ
Your phone number, user name, and password is configured correctly.
The registrar’s and proxy server’s IP address and port number are configured correctly.
The Power, Broadband/DSL and Voice LEDs are on.
As soon as the Voice LED turns on, you will hear a click, indicating the switch from PSTN to
VoIP.
Calling over PSTN
If you have problems calling via the regular phone line, check whether:
ꢀ
Your telephone is correctly connected to the Thomson Gateway.
If the Thomson Gateway is turned off, phone calls are always routed over PSTN.
ꢀ
ꢀ
Your telephone is working on the PSTN network:
ꢁ
ꢁ
Connect your phone directly to PSTN.
Try to make a phone call.
The Forced FXO service is activated, or whether your service provider requested you to dial an extra
prefix for making calls via PSTN.
If VoIP is enabled (VoIP Ready LED is on), and when making a forced FXO call, you will hear
a click, indicating the switch from VoIP to PSTN.
Problems with Supplementary Services
If you have a problem with a supplementary telephony service, check whether the service is activated.
E-DOC-CTC-20080118-0051 v2.0
78
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Troubleshooting
7.4 Reset to Factory Defaults
Resetting your Thomson Gateway
If at some point you can no longer connect to the Thomson Gateway or you want to make a fresh install, it
may be useful to perform a reset to factory defaults.
Warning
A reset to factory default settings deletes all configuration changes you made. Therefore, after the reset, a
reconfiguration of your Thomson Gateway will be needed.
Also your WLAN clients will have to be re-associated, as described in “3.1.1 Connecting a computer using
Methods
You can choose between:
ꢀ
ꢀ
Software Reset
Proceed as follows:
1
2
3
4
5
On the Thomson Gateway menu, click Configuration.
In the Pick a task list, click Reset my Thomson Gateway to default settings.
The Thomson Gateway restores the initial configuration and restarts.
The Thomson Gateway returns to the Thomson Gateway home page (unless the IP address of your
computer is not in the same subnet as the default IP address of the Thomson Gateway, being
192.168.1.254).
E-DOC-CTC-20080118-0051 v2.0
79
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Troubleshooting
Hardware Reset
Proceed as follows:
1
2
Make sure the Thomson Gateway is turned on.
Use a pen or an unfolded paperclip to push the recessed Reset button on the back panel. Push it until the
Power LED lights red - this will take about 7 seconds.
3
4
Release the Reset button.
The Thomson Gateway restarts.
Your system administrator may have disabled the physical reset button of the Thomson
Gateway. In this case, a hardware reset to defaults is not possible.
E-DOC-CTC-20080118-0051 v2.0
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
THOMSON Telecom Belgium
Prins Boudewijnlaan 47
2650 Edegem
© Thomson 2008. All rights reserved.
E-DOC-CTC-20080118-0051 v2.0.
Download from Www.Somanuals.com. All Manuals Search And Download.
|