Intelligent I/O - Integrated F/X
Not Just Another Audio Interface
Konnekt 24D is a ground breaking audio interface that integrates TC’s world famous
effects in a state-of-the-art design. The Fabrik C channel strip and Fabrik R reverb
known from TC’s PowerCore platform are built into the Konnekt 24D and they work
even when the unit is used in stand-alone mode. Konnekt 24D is designed for recording
and performing musicians who want the highest possible sound quality from input,
through built-in real-time effects, to the recording application.
Two combo inputs on the front panel combine outstanding mic preamp quality with
true Hi-Z inputs. The light ring gives you easy access, instant control and visual feed-
back on important parameters directly from the front panel. You can stack up to four
Konnekts together using TC NEAR™ - Network Expandable Audio Recording - to obtain
a massive amount of I/O and effects channels. If you are working with active monitors,
you’ll be delighted with the analog volume control that ensures a wide dynamic range.
If you don’t need all the I/O or the DSP effects, choose Konnekt 8, which is a non-DSP
version of Konnekt 24D with less I/O.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPACT™ - Integrated Mic PreAmp Circuit Technology
Konnekt 24D and Konnekt 8 come with two high quality IMPACT™ preamps that give you the very best
opportunity to make outstanding quality recordings. The IMPACT™ preamps are based on dedicated
and steadfast technology that ensures a perfect and unbiased signal flow, from start to finish.
Hi-Z guitar optimized inputs
If you want to retain the sonic quality of your guitar it is required that you use a high imped-
ance input when you plug a passive guitar or bass into an audio interface. For that reason we’ve
designed a dedicated analog circuit for the Hi-Z inputs. It gives you a true high impedance input
that secures the original sonic quality and spectrum of the instrument.
Analog Volume Control for Integration with Active Monitors
The analog volume control gives you perfect control of your active speakers. Most digital devices
handle volume in the digital domain, leaving the analog outputs at full volume. When these outputs
are sent to powered monitors, which are also at full volume, it can create a noticeably high noise
floor. The volume knob is a pure analog volume control, which is closely integrated with the analog
circuit design, and it makes sure that you get the very best listening conditions with the lowest
possible noise floor.
Instant Front Panel Control
The TC multi-function light ring is a very simple interface that gives you access to a wealth of
possibilities, especially when you are using the stand alone mode. It gives you easy access, instant
control and visual feedback on important parameters directly from the front panel. If you don’t
want to turn on your computer, but still want to use the TC effects in the Konnekt 24D, you can
access them directly from the front panel by using the light ring. You can plug your guitar directly
into the Konnekt 24D, and control dedicated parameters like the reverb return level or the reverb
decay time of the Fabrik R reverb.
Intuitive Control Panel
From your computer you can operate the control panel with access to
the full feature set of the Konnekt 24D and Konnekt 8. The control panel
has been designed for intuitive and speedy control. We’ve integrated an
intelli-gent input sensing system that detects what inputs you’re cur-
rently using. As soon as you connect a device, microphone, guitar, or
something else to the analog inputs, the input automatically shows on
the control panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
ADAT/Optical
S/PDIF
Bus powered
FireWire
Sample accurate MIDI
96kHz S/PDIF
4 balanced analog line
outputs, 2 are controlled
by the analog volume
control on the front
4 balanced analog line
inputs, 2 are coupled
with the 2 mic/inst inputs
on the front
Features
• Built-in real-time DSP effects; Fabrik C channel strip and Fabrik R reverb based on MINT™
• Outstanding IMPACT™ mic preamps
• True Hi-Z guitar inputs - dedicated circuits for guitar and bass
• Ultimate signal path from input, through built-in real-time effects, to the recording application
• Front panel control of internal mixer parameters
• Analog volume control for perfect integration with powered speakers
• Full feature stand alone mode
• Network up to 4 units via the TC NEAR™ 1394 Firewire based network to get more inputs, outputs and effects channels
• Full feature direct monitoring - with effects and also between networked units
• Intuitive control panel with automatic input detection
• 3 DSP programs for total recall of internal routing, mixer and effects settings
• FireWire bus powered
• DICEII digital interface chip with JET™ Jitter Elimination Technology
• Low latency drivers: WDM, ASIO and CoreAudio (including Intel Macs)
• Dual headphone outputs, one with auto speaker muting
• 24-bit/192kHz sampling rate
• Sample accurate MIDI
• 14/14 I/O: 2 mic/inst/line, 2 balanced line inputs and 4 balanced line outputs, 8 ADAT and 2 S/PDIF (optical and coaxial) inputs
and outputs
• Cubase LE included
• Available in non-DSP version with less I/O
The Konnekt 8 audio interface is the ideal solution for recording and performing musicians who want the highest possible sound quality from input to the recording
application, but don’t need the built-in effects of Konnekt 24D. It features the same high quality mic/guitar inputs coupled with a stereo set of line inputs on the rear panel,
along with 2 analog controlled line outputs. On top of this, it has an additional auxiliary input for convenient monitoring, and 96 kHz S/PDIF. Konnekt 8 also provides full
sample accurate MIDI implementation and FireWire connectivity.
T C E l E C T r o n i C A / S D E n m A r k • & + 4 5 8 7 4 2 7 0 0 0
T C E l E C T r o n i C i n C U S A • & ( 8 1 8 ) 6 6 5 4 9 0 0
•
m A i l : i n f o @ T C E l E C T r o n i C . C o m
w w w . t c e l e c t r o n i c . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
|