Stanton CD Player S 500 User Manual

USER MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT TO SAFETY  
IMPORTANT TO SAFETY  
NOTE:  
This CD player uses the semiconductor laser. To allow  
you to enjoy music at a stable operation, it is  
WARNING:  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT  
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  
- 35  
recommended to use this in a room of 5  
41  
95  
.
CAUTION:  
1. Handle the power supply cord carefully  
Do not damage or deform the power supply cord. If it is  
damaged or deformed, it may cause electric shock or  
malfunction when used. When removing from wall  
outlet, be sure to remove by holding the plug  
attachment and not by pulling the cord.  
RATING LABE  
2. In order to prevent electric shock, do not open the  
top cover. If a problem occurs, contact your dealer.  
CLASS 1 LABEL  
3. Do not place metal objects or spill liquid inside the  
CD player. Electric shock or malfunction may result.  
Please, record and retain the Model name and serial  
number of your set shown on the rating label.  
Model No. ___________Serial No. ___________  
CAUTION:  
USE OF CONTROLS OR ADJUSTMENTS OR  
REFORMANCE OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
CAUTION: TO REDUCE THE  
RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE THE COVER  
(OR BACK) . THERE ARE NO  
SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
THE COMPACT DISC PLAYER SHOULD NOT BE  
ADJUSTED OR REPAIRED BY ANYONE EXCEPT  
PROPERLY QUALIFIED SERVICE PERSONNEL.  
DOUBLE INSULATED - WHEN SERVICING, USE ONLY  
IDENTICAL REPLACEMENT PARTS.  
The lightning flash with arrowhead symbol,  
within an equilateral triangle, is intended to  
alert the user to the presence of uninsulated  
"dangerous voltage" within the product's  
enclosure that may be of sufficient  
magnitude to constitute a risk of electric  
shock to persons.  
NOTE:  
This unit may cause interference to radio and television  
reception.  
Line Voltage Selection (for multiple voltage  
model only)  
The desired voltage may be set with the  
VOLTAGE SELECTOR switch on the rear  
panel, using a screwdriver.  
Do not twist the VOLTAGE SELECTOR  
switch with excessive force as this may  
cause damage.  
The exclamation point within an equilateral  
triangle is intended to alert the user to the  
presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
If the VOLTAGE SELECTOR switch does not move  
smoothly, please contact a qualified serviceman.  
FOR U.S.A. & CANADA MODEL ONLY  
CAUTION  
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS  
(POLARIZED) PLUG WITH AN EXTENSION CORD,  
RECEPTACLE OR OTHER OUTLET UNLESS THE  
BLADES CAN BE FULLY INSERTED TO PREVENT  
BLADE EXPOSURE.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
1. Read Instructions  
All the safety and operating  
plugs, convenience receptacles, and the point where  
they exit from the appliance.  
instructions should be read before the appliance is  
operated.  
13. Cleaning - The appliance should be cleaned only as  
recommended by the manufacturer.  
2. Retain Instructions  
The safety and operating  
instructions should be retained for future reference.  
Clean by wiping with a cloth slightly damp with water.  
Avoid getting water inside the appliance.  
3. Heed Warnings All warnings on the appliance and in  
the operating instructions should be adhered to.  
14. Disconnect power cord before servicing.  
4. Follow Instructions All operating and use instructions  
15. Replace critical components  
or recommended equivalents.  
only with factory parts  
should be followed.  
5. Water and Moisture The appliance should not be  
16. For AC line powered units - Before returning repaired  
unit to user, use an ohm-meter to measure from both  
AC plug blades to all exposed metallic parts. The  
resistance should be more than 100,000 ohms.  
used near water - for example, near a bathtub,  
washbowl, kitchen sink, laundry tub, in a wet  
basement, or near a swimming pool, and the like.  
6. Carts and Stands The appliance should be used only  
17. Non-use Periods The power cord of the appliance  
with a cart or stand that is recommended by the  
manufacturer.  
should be unplugged from the outlet when left unused  
for a long period of time.  
18. Object and Liquid Entry Care should be taken so that  
6A. An appliance and cart combination  
should be moved with care. Quick  
stops, excessive force, and uneven  
surfaces may cause the appliance and  
cart combination to overturn.  
objects do not fall and liquids are not spilled into the  
enclosure through openings.  
19. Damage Requiring Service The appliance should be  
serviced by qualified service personnel when:  
A. The power-supply cord or the plug has been  
damaged; or  
7. Wall or Ceiling Mounting The appliance should be  
mounted to a wall or ceiling only as recommended by  
the manufacturer.  
B. Objects have fallen, or liquid has been spilled into  
the appliance; or  
8. Ventilation The appliance should be situated so that  
its location or position does not interfere with its proper  
ventilation. For example, the appliance should not be  
situated on a bed, sofa, rug, or similar surface that  
may block the ventilation openings; or, placed in a  
built-in installation, such as a bookcase or cabinet that  
may impede the flow of air through the ventilation  
openings.  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally  
or exhibits a marked change in performance; or  
E. The appliance has been dropped, or the enclosure  
damaged.  
20. Servicing The user should not attempt any service to  
the appliance beyond that described in the operating  
instructions. All other servicing should be referred to  
qualified service personnel.  
9. Heat The appliance should be situated away from  
heat sources such as radiators, heat registers, stoves,  
or other appliances (including amplifiers) that produce  
heat.  
21 Ventilation – The appliance should be situated so that  
ist location or position does not interfere with its proper  
ventilation. For example, the appliance should not be  
siruated on a bed, sofa, rug, or similar surface that  
may block the ventilation openings; or, placed in a  
built-in installation, such as a bookcase or cabinet that  
may impede the flow of air through the ventilation  
openings.  
10. Power Sources The appliance should be connected  
to a power supply only of the type described in the  
operating instructions or as marked on the appliance.  
11. Grounding or Polarization Precautions should be  
taken so that the grounding or polarization means of  
an appliance is not defeated.  
12. Power-Cord Protection Power-supply cords should  
22 Cleaning – The appliance should be cleaned only as  
recommended by the manufacturer.  
be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them, paying  
particular attention to the cord in correspondence of  
23 Nonuse Periods – The power cord of the appliance  
should be unplugged from the outlet when left unused  
for a long period of time.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAIN FEATURES  
CONTROL UNIT  
1 16 4 9 3 12 10 2  
8 18 1 16 4 9 3 12 10 2  
8
1314 15 11  
17  
1314 15 11  
17  
5 6 7  
5 6 7  
CONNECT  
TO  
MAIN UNIT  
CONNECT  
TO  
MAIN UNIT  
2
1
CONTROL  
CONTROL  
2
1
19  
20  
19  
20  
(1)OP/CL  
(2)TIME (Time Button)  
(11)CUE (Cue Button)  
(12)PROG.  
(3)LCD (Liquid Crystal Display)  
(4)LOOP (Loop button)  
(5)PITCH - (Pitch Bend - Button)  
(6)PITCH +(Pitch Bend + Button)  
(7)PITCH (Pitch Button)  
(8)Pitch Slider  
(13)B.SKIP  
(14)SEARCH/SCAN  
(15)SEARCH/SCAN  
(16)F.SKIP  
(17)PITCH (Pitch Indicator)  
(18)REALY  
(19)CONTROL CONNECTOR  
(20)CONTROL SOCKETS  
(9)PLAY/PAUSE  
(Play/Pause Button)  
/
(10)SGL/CTN (Single/Continuous Button)  
LCD  
(21) ~(24)TRACK, MINUTE, SECOND and  
FRAME Displays  
(25) BAR Indicator  
(26) ELAPSED Indicator  
(27) CONTINU Indicator  
(28) SINGLE Indicator  
(29) REMAIN Indicator  
(30) PITCH DISPLAY  
TRACK  
M
S
F
21  
22  
23 24 25 26 27 28 29 30  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATIONS  
1. Checking the Contents  
Check that the carton contains the following items:  
1) Main unit  
2) Control unit  
3) Operating instructions (this booklet)  
4) Pair of RCA pin cord.  
5) Control cords (1 meter)  
2. Installing the Unit  
Mount the unit onto your console or rack with 19" EIA rack rails.  
CAUTION:  
l The player will work normally when the main unit is  
mounted with the front panel at within 15 degrees of the  
vertical plane. If the unit is tilted excessively, discs may  
not be loaded or unloaded properly.  
(Figure 1)  
l The control panel's LCDs are designed to be  
clearly visible within the angles shown in Figure 2.  
Mount the control unit so that the visual angle is within  
this range.  
Max.  
15°  
45°  
5°  
Control  
panel Button  
Main unit  
Figure 1  
Figure 2  
.
Connections  
1) Turn off the POWER switch.  
2) Connect the RCA pin cord to the input on your mixer.  
3) Connect the control cords to the REMOTE connector on the main unit.  
CAUTION:  
Be sure to use the supplied control cords. Using another type of cable may result in damage.  
Be sure the power is off when connecting the control cords. Otherwise the units may not work properly.  
·
·
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES AND FUNCTIONS  
Main Unit Front Panel  
(1) POWER (Power ON/OFF Switch)  
When the POWER switch is pressed, the power turns  
on.  
(4) REMOTE CONTROL CONNECTOR  
Connect this connector to the control unit using the  
included control cord.  
(2) Disc Holder  
(5) AUDIO OUT  
Place the discs in the holder. Press the OPEN/CLOSE  
button to open and close the disc holder.  
(3) OP/CL  
The audio signals from each player are output from  
these jacks.  
(6) DIGITAL OUT SOCKET  
Press it to open and close the disc holder. The control  
unit also includes OP/CL button. The disc holder  
cannot be opened during playback, so stop playback  
before pressing the button.  
The music-signal of this socket is digital. Connect the  
output to the respective input of a digital amplifier for  
example.  
CONTROL UNIT  
(1) OP/CL  
play modes. The SINGLE mode is indicated by the  
SINGLE indicator on the LCD.  
(11)CUE (Cue Button)  
Press it to open and close the disc holder. The main  
unit also includes OP/CL buttons. The disc holder  
cannot be opened during playback, so stop playback  
before pressing the button.  
Press the CUE button during playback to return to the  
position at which playback started.  
(2) TIME (Time Button)  
(12)PROG.  
Press this button to switch the time display between  
the elapsed time and remaining time and total remain  
time.  
Press the PROGRAM button, the player will enter the  
program mode and stop the CD playback.  
(13)B. SKIP  
The selected mode is indicated by the ELAPSED and  
REMAIN and TOTAL REMAIN indicator on the LCD.  
(3) LCD  
Use these button to go back to the beginning of the  
current track or select a previous track for playing.  
(14),(15)SEARCH/SCAN  
(4) LOOP (Loop Button)  
Press these buttons to perform frame search function  
during pause mode or to perform scan function during  
play mode.  
Press the LOOP button to set the loop start point,  
press the LOOP button again to set the loop end point.  
(5) PITCH - Button  
The CD slows down while this button is pressed.  
Release the button to return to the original BPM.  
(6) PITCH + Button  
The CD speeds up while this button is pressed.  
Release the button to return to the original BPM.  
(7) PITCH (Pitch Button)  
Use these button to enable or disable BPM adjustment  
with the pitch sliders. BPM adjustment with the pitch  
sliders is enabled when the PITCH LED lights.  
(8) Pitch Slider  
(16)F. SKIP  
Use these button to skip to the next CD track.  
(17)PITCH (Pitch Indicator)  
Moving the pitch slider will change the pitch only when  
the pitch LED is illuminated.  
(18)REALY  
By pressing the RELAY button, the playback  
automatically switches to the other player after every  
track.  
(19)Control connector  
Connect this connector to the REMOTE connector on  
the main unit using the included control cord.  
(20)Control socket  
Use the slider to adjust the CD pitch. Slide up to  
decrease the pitch, down to increase the pitch.  
(9) PLAY/PAUSE Button  
Via the Control socket, the respective CD-player can be  
remotely controlled. If you are using a mixer with fader  
start-function connect the player with the Control Out-  
socket. Please note that these sockets must never be  
connected with any voltage.  
Use the button to start playback. Press once to start  
playback, once again to set the pause mode, and once  
more to resume playback.  
(10)SGL/CTN (Single/Continuous Button)  
Press it to switch between the single and continuous  
LCD  
(21) ~(24)TRACK, MINUTE, SECOND and FRAME  
Displays  
(27) CONTINU Indicator  
When the indicator lights, the function will cause the  
unit to play continuously.  
(28) SINGLE Indicator  
These displays indicate information for the CD’ s current  
position and time.  
When the indicator lights, playback will stop at the  
beginning of the next track.  
(29) REMAIN Indicator  
It indicates that the time shown on the display is the  
remaining time of playing track.  
(30) PITCH DISPLAY  
(25) BAR Indicator  
These ten indicators provide a visual display of the  
approximate position of the pickup within the current  
track.  
(26) ELAPSED Indicator  
It indicates that the time shown for the display is the  
elapsed time.  
It shows the BPM change range, the BPM changes  
within a range of +/-12%.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIONS  
1. Opening and Closing the Disc Holder  
l
Turn the unit power on. Press the OPEN/CLOSE button to open the disc holder. OPEN/CLOSE buttons are provided  
on both the main unit and control unit.  
l
The disc holder cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE  
button is pressed accidentally. Stop the playback first, then press the OPEN/CLOSE button.  
2. Loading discs  
l
Hold the disc by the edges and place it in the disc holder, then press the OPEN/CLOSE button again to close the disc  
holder. The unit will show the total track number and the total playing time for about 2 seconds then enter the cue  
condition, the cue point will be set to the music starting point of the first track automatically.  
Figure 2-1  
CAUTION:  
l
l
Do not place any foreign objects in the disc holder, and do not place more than one disc in the disc holder at a time.  
Do not push the disc holder in manually when the power is off, as this may result in malfunction and damage the  
player.  
3. Selecting Tracks  
l
l
l
l
Press the SKIP button once to move to one higher or lower track.  
Hold the SKIP button to change tracks continuously at a higher speed.  
When a new track is selected during playback, playback begins as soon as the skip search operation is completed.  
If the skip  
button is pressed while at the last track, the first track is selected. In the same way, if the skip  
button is pressed while at the first track, the last track is selected.  
4. Starting Playback  
l
l
Press the PLAY/PAUSE button during the pause or cue condition to start playback, the PLAY indicator lights.  
The point at which playback starts is automatically stored in the memory as the cue point. The pickup then returns to  
the cue point when the CUE button is pressed .(Back Cue)  
Figure 4-1  
5. Stopping Playback  
l
There are two ways to stop playback.  
1). Press the PLAY/PAUSE button during playback to pause at that point.  
2). Press the CUE button during playback to return to the cue point and enter pause condition.(Back Cue)  
CUE  
Figure 5-1  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIONS  
6. Pausing  
l
l
l
Press the PLAY/PAUSE button to switch between the play and pause.  
The pause indicator lights when the pause mode is set.  
Figure 6-1 show the relationship between the play and pause.  
2
4
6
3
7
1
5
Figure 6-1  
ŒThe player has completed the cue or pause operation and is waiting for the play start command.  
When the PLAY/PAUSE button is pressed, playback starts and the cue point is stored in the memory.  
ŽPlaying.  
The pause mode is set when the PLAY/PAUSE button is pressed again  
Pausing.  
Playback resumes when the PLAY/PAUSE button is pressed again.  
Playing.  
7. Cueing  
l
"Cueing" is the action of preparing for playback.  
l
Press CUE button, the player will enter cue mode, the playback returns to cue point and enter pause condition, the  
cue and pause indicator light up. When PLAY/PAUSE button is pressed, play starts from the cue point.  
When the track search operation is completed after pressing the SKIP buttons, the player automatically finds the  
position at which the sound starts and cues there(Auto Cue).  
If the CUE button is pressed after the search operation or the scanning operation, the playback return to cue point and  
enter pause condition.  
l
l
l
Figure 7-1 shows the relationship between the play and back cue operations.  
2
8
2
4
6
8
3
3
7
1
1
5
9
9
Figure 7-1  
ŒThe player has completed the cue or pause operation and is waiting for the play start command.  
When the PLAY/PAUSE button is pressed, playback starts and the cue point is stored in the memory.  
ŽPlaying.  
The pause mode is set when the PLAY/PAUSE button is pressed again.  
Pausing.  
When the PLAY/PAUSE button is pressed again, playback resumes and the new cue point is stored in the  
memory.  
Playing.  
Press the CUE button.  
The pickup returns to the cue point.(Back Cue)  
Cue point setting:  
l
When play starts from pause or skip to a new track by using skip button, the begin play point will be set to the new cue  
point.  
When a new cue point is set, the cue indicator lights by flash for about 1 second.  
NOTE: Daring cue mode, if the CUE button is pressed and hold, playback will start from the cue point, when the button is  
released, the player will return to the cue mode automatically, it allows you to check the cue point.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIONS  
8. Frame search  
l
l
l
Frame search is a function for monitoring the sound at a certain section of the disc and manually changing the position.  
Searching is used to set play start points with precision.  
Press the  
or  
while in pause or cue mode to begin searching. The sound for one revolution of the disc is  
output repeatedly. The point at which the sound starts is indicated on the LCD.  
If the time display and the CUE point are the same, the CUE indicator lights.  
9. Scanning (Fast forward/Fast backward)  
l
Scanning is a function for moving quickly forward or backward when the  
This unit supports 3 different speed, the scanning speed depends on how long you hold the button. If you hold the  
or button for a about 3 seconds, the scanning speed will be changed, when you release the button, the scanning  
speed return to normal speed.  
Press and hold the or  
output. The current scan point is indicated on the LCD.  
Press and hold the to scan in the forward scanning,  
or  
button is pressed.  
l
l
l
to begin scanning. The disc moves rapidly forward or backward and the sound is  
to scan in the reverse scanning.  
10. Time display  
Press TIME button to select time display mode:  
ŒElapsed time of a track.  
Remaining time of a track.  
ELAPSED  
REMAIN  
TIME  
TIME  
Figure 10-1  
11. Matching the Beats Per Minute (BPM)  
There are two tools available for matching the BPM of the two CDs:  
Use the pitch slider to adjust the BPM statically.  
Use the PITCH BEND buttons to change the BPM temporarily.  
1) Pitch Slider  
ŒTo adjust the BPM by sliding the pitch slider up or down, press the PITCH button to turn on the PITCH  
adjustment function before use.  
Slide the pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is +/-10%.  
2) Pitch Bending  
l
l
The BPM increases or decreases respectively while the PITCH BEND+ or PITCH BEND- button is pressed.  
The BPM increase depends on how long you hold the button. If you hold the button for about 1/2 second, theBPM will  
go either to +16% for PITCH BEND+ or -16% for PITCH BEND-. If you tap the button, the BPM will only change a little  
so you can change the beat slightly without audible changes in the music.  
l
l
The CD will return to the tempo indicated by the Pitch slider when you let go to the PITCH BEND+ or -.  
Figure 11-1 shows an example of how to use the pitch bend function. In this example, both players are playing and the  
BPM has already been matched with the pitch sliders.  
The bass beats also match  
CD1  
Bass beat  
bass beat  
PITCH BEND  
CD2  
bass beat  
Bass beat  
Figure 11-1  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIONS  
12. Program play  
ŒPress the PROGRAM button, the player will enter the program mode and the CD will stop rotating.  
Select the desired track by pressing the SKIP button, then press the PROGRAM button again. The selected  
track will be added to the program sequence.  
ŽRepeat step 2 operation. A maximum of 20 tracks can be programmed at one time.  
Press the PLAY/PAUSE button to start the program play from the first selection.  
Press the program button again during program play to stop play.  
Press and hold the program button more than 2 seconds to cancel the program mode and erase all the current  
program contents.  
13. Loop Play  
Œ
Press the LOOP button to set the loop start point A, the LOOP indicator will flashes on the LCD.  
Press the LOOP button again to set the loop end point B, after the B point is set, the playback will enter the loop play  
from A to B repeatedly.  
Ž
Press the LOOP button again, the loop play function is canceled, the LOOP indicator goes out.  
14. Faderstart  
With the S-500, you have the possibility to start the respective CD-player direcatly from the mixer. Make sure that the  
Control socket is connected with the respective socket on the mixer. Additionally, the Audio out socket have to be  
connected with the Line-input sockets of your mixer. Please note that the Faderstart function only works with the  
appropriate mixers. Insert the CD and select the desired track. Start playback from your mixer.  
15. Relay  
In the Relay-operation, the device automatically switches to the other player after every track. In this way, you have the  
possibility to enlarge the music program by using several CDs.  
Possibility 1:  
Connect the Control-sockets of the two CD-players with one another. The Relay-button must remain unpressed (LED off).  
Press the Single-button (The display shows SINGLE) on both CD-player. Start playback of CD1. As soon as the  
current track of CD1 is finished, the player automatically starts CD2. The first CD-player goes into Pause-mode. You  
can enter a new CD or memorize a Cue-point at the respective player in the Pause-Mode.  
CAUTION: The Relay-operation does not work properly if the two CD-players are connected to different power amplifiers.  
Possibility 2:  
Press the Relay-button (LED on).  
In the Single-mode, the device automatically starts with the playback of the other CD-player of the other CD-player at  
the end of the track.  
During the Relay-operation, the Faderstart-function is disabled.  
You can switch the Relay-operation off via the Relay-button (LED on) and the Faderstart-function will work again.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE SWITCHING OFF THE POWER  
When you have finished using the CD player, before switching off the power, be sure that the disc holder had been closed  
with the OPEN/CLOSE button.  
CAUTION:  
Do not forcibly close the disc holder when the power is off.  
POWER OFF  
POWER OFF  
û
Do not switch off the power when the disc holder is open.  
Switch off the power after the disc holder has been closed  
with the OPEN/CLOSE button.  
COMPACT DISCS  
1. Precautions on handling compact discs  
Ÿ
Condensation will form if a disc is brought into a warm  
area from a colder one, such as outdoors in winter. Do  
not attempt to dry the disc with a hair dryer, etc.  
Ÿ
Ÿ
Ÿ
Do not allow fingerprints, oil or dust to get on the  
surface of the disc.  
If the disc is dirty, wipe it off with a soft dry cloth.  
Do not use benzene, thinner, water, record spray, Ÿ After playing a disc, always unload it from the  
electrostatic-proof chemicals, or silicone-treated cloths  
to clean discs.  
2. Precaution on storage  
player.  
Ÿ
Always store the disc in the jewel case protect from  
dirt or damage.  
Always handle discs carefully to prevent damaging  
the surface; in particular when removing a disc from its Ÿ Do not place discs in the following areas:  
case or returning it.  
Do not bend the disc.  
Areas exposed to directs sunlight for a consi-  
derable time.  
Ÿ
Ÿ
Ÿ
Ÿ
Do not apply heat.  
Do not enlarge the hole in the center of the disc.  
Do not write on the label (printed side) with a hard- ƒ Areas affected by heat from indoor heaters, etc.  
Areas subject to accumulation of dust or high  
humidity.  
tipped implement such as a pencil or ball point pen.  
SPECIFICATIONS  
GENERAL  
Dimensions:  
Main unit:  
482(W) x 88.8(H) x 262(D) mm  
Control unit:  
Player unit:  
Control unit:  
482(W) x 88.8(H) x 80(D) mm  
Weight:  
5 kgs  
2 kgs  
Power supply:  
115 / 230V AC, 50 / 60Hz  
25W  
Power consumption:  
502-S500-1082  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shure Microphone mx400 User Manual
Snapper Network Card 1695295 User Manual
Sony Camcorder XR260V User Manual
Sony Digital Camera DSC F717 User Manual
Sony Microscope Magnifier HDLA1500 User Manual
Sony Stereo Amplifier XM ZR602 User Manual
Spalding Fitness Equipment M4115221 User Manual
StarTechcom Laptop Docking Station UNIDOCK2U User Manual
Sunbeam Bread Maker 5891 33 User Manual
Sunbeam Gas Grill WG4610HP User Manual