Sprint Nextel Telephone 900MHz Digital Cordless Phone with Call Waiting User Manual

OWNER'S MANUAL

900MHz Digital Cordless Phone

with Call Waiting Caller ID

National Help Desk Call Sprint

TOLL FREE AT 1-800-949-4357

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

PARTS CHECKLIST .................................................................................... 1

FCC REGULATIONS ................................................................................... 2

IMPORTANT SAFETY INSTRUCTIONS ...................................................... 4

GETTING STARTED ................................................................................... 6

WALL MOUNTING ....................................................................................... 8

HANDSET UNIT KEYS AND FEATURES .................................................... 9

BASE UNIT KEYS AND FEATURES ......................................................... 10

BASIC TELEPHONE OPERATIONS

Area Code Programming ........................................................................... 11

Making Calls ............................................................................................... 11

SpeakerphoneTips ..................................................................................... 11

Redial/Pause .............................................................................................. 12

Answering Calls ........................................................................................ 12

HandsetVolume ......................................................................................... 12

Mute .......................................................................................................... 12

Hold ........................................................................................................... 12

CallWaiting ................................................................................................ 12

Paging the Handset .................................................................................... 13

Intercom .................................................................................................... 13

Voice Mail Indicator.................................................................................... 13

SettingThe Handset Ringer........................................................................ 13

Handset RingerVolume .............................................................................. 13

Base Unit Ringer ........................................................................................ 14

Handset Speakerphone Feature ................................................................. 14

CALLER ID

Reviewing the Call Log ............................................................................... 14

Erasing Calls.............................................................................................. 15

Speed Dialing from Caller ID ...................................................................... 15

Voice Announce Caller ID .......................................................................... 15

DIRECTORY

To Store a Name, Number, andVoice Announce Recording ........................ 16

ReviewingYour“Voice Announce” Names................................................... 17

Storing a Caller ID Record in the Directory ................................................. 17

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

Making Directory Calls ................................................................................ 17

Editing a Directory Entry ............................................................................. 17

Erasing a Directory Entry ............................................................................ 18

Programming Speed Dial Numbers in the Base Unit.................................... 18

Speed Dialing from the Base Unit ............................................................... 18

HEADSET OPERATIONS ........................................................................... 19

ADDITIONAL OPERATIONS

Pay Per Use Functions................................................................................ 20

Power Backup ............................................................................................. 20

Replacing a Drained Handset Battery .......................................................... 20

MAINTENANCE .......................................................................................... 21

IN CASE OF DIFFICULTY .......................................................................... 22

WARRANTY ................................................................................................ 24

TECHNICAL SPECIFICATIONS ................................................................. 25

Download from Www.Somanuals.com. All Manuals Search And Download.

PARTS CHECKLIST

To purchase replacement battery packs,

please visit your local Sprint store or

call VTech at 1-800-624-5688.

1. Handset

2. Base Unit

3. AC Power Adaptor

4. Battery Pack(x2)

5. Wall Mounting Bracket

6. Telephone Line Cord

7. Belt Clip

8. Owner’s Manual

CHRISTOPHER DOW

1-123-456-7890

Select

PHONE

Flash

Speaker

Flash

OFF

ABC

DEF

GHI

PQRS

JKL

TUV

OPER

MNO

WXYZ

Redial/

Pause

Mute/ Intercom Program

Hold

Return

Call

Repeat

Dial

3-Way

Call

HANDSET

BASE UNIT

WALL MOUNTING

BATTERY PACK(x2)

AC POWER ADAPTOR

BRACKET

OWNER’S MANUAL

TELEPHONE LINE CORD

BELT CLIP

OWNER’S MANUAL

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC Regulations

This equipment complies with Parts 15

and 68 of the Federal Communications

Commission (FCC) rules for the United

States. It also complies with regulations

RSS210 and CS-03 of Industry and

Science Canada. Operation is subject

to the following two conditions: (1) this

device may not cause interference, and

(2) this device must accept any

interference, including interference that

may cause undesired operation of the

device.

provide reasonable protection against

harmful interference in a residential

installation. This equipment generates,

uses and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may

cause harmful interference to radio

communications. However, there is no

guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful

interference to radio or television

reception, which can be determined by

turning the equipment off and on, the

user is encouraged to try and correct

the interference by one or more of the

following measures:

A label is located on the underside of

the base unit containing either the FCC

registration number and Ringer

Equivalence Number (REN) or the IC

registration number and Load Number.

You must, upon request, provide this

information to your local telephone

company.

•

Reorient or relocate the receiving

antenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet

or on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced

radio/TV technician for help.

This equipment is compatible with

inductively coupled hearing aids.

Should you experience trouble with this

telephone equipment, please contact:

•

Sprint National Help Desk at 1-800-

949-4357.

FCC Part 68

The FCC requires that you connect

your cordless telephone to the

nationwide telephone network through

For repair/warranty information. The

telephone company may ask you to

disconnect this equipment from the line

network until the problem has been

corrected.

modular telephone jack (USOC

RJ11C, RJ11W or RJ14).

Your telephone company may

discontinue your service if your

equipment causes harm to the

telephone network. They will notify you

in advance of disconnection, if possible.

During notification, you will be informed

of your right to file a complaint with the

FCC.

FCC Part 15

Warning: Changes or modifications to

this unit not expressly approved by the

party responsible for compliances could

void the user's authority to operate the

equipment.

The equipment has been tested and

found to comply with part 15 of the FCC

rules. These limits are designed to

Occasionally, your telephone company

may make changes in its facilities,

equipment, operation, or procedures

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC Regulations

that could affect the operation of your

equipment. If so, you will be given

advance notice of the change to give

you an opportunity to maintain

uninterrupted service.

The base unit contains no user

serviceable parts. The handset contains

a user replaceable battery pack.

If it is determined that your telephone

equipment is malfunctioning, the FCC

requires that it not be used and that it

be unplugged from the modular jack

until the problem has been corrected.

Repairs to this telephone equipment

can only be made by the manufacturer

or its authorized agents or by others

who may be authorized by the FCC.

For repair procedures, follow the

instructions outlined under the

manufacturer’s Limited Warranty.

This equipment may not be used on

coin service provided by the phone

company or Party Lines.

The REN is useful in determining the

number of devices you may connect to

your telephone line and still enable the

devices to ring when you receive a call.

The general rule is that the REN value

should not exceed 5.0 total; however,

contact your local telephone company

for the specific number in your area.

Your SP 1933 is designed to operate at

the maximum power allowed by the

FCC . This means your handset and

base unit can communicate only over a

certain distance - which will depend on

the location of the base unit and

handset, weather, and the construction

and layout of your home or office.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment,

basic safety precautions should

always be followed to reduce the risk

of fire, electric shock and injury to

persons, including the following:

7. This product should be operated

only from the type of power source

indicated on the marking label. If you

are not sure of the type of power

supply to your home, consult your

dealer or local power company.

1. Read

and

understand

all

instructions.

8. Do not allow anything to rest on the

power cord. Do not locate this product

where the cord will be abused by

persons walking on it.

2. Follow all warnings and instructions

marked on the product.

3. Unplug this product from the wall

outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

Use a dry cloth for cleaning.

9. Do not overload wall outlets and

extension cords as this can result in

the risk of fire or electric shock.

10.Never push objects of any kind into

this product through cabinet slots as

they may touch dangerous voltage

points or short out parts that could

result in a risk of fire or electric

shock. Never spill liquid of any kind

on the product.

4. Do not use this product near water,

for example, near a bath tub, wash

bowl, kitchen sink, or laundry tub,

in a wet basement, or near a

swimming pool.

5. Do not place this product on

unstable cart, stand, or table. The

telephone may fall, causing serious

damage to the telephone.

11.To reduce the risk of electric shock,

do not disassemble this product, but

take it to a qualified service personnel

when some service or repair work is

required. Opening or removing

covers may expose you to dangerous

voltages or other risks. Incorrect

reassembly can cause electric shock

when the appliance is subsequently

used.

6. Slots and openings in the cabinet

and the back or bottom are provided

for ventilation, to protect it from

overheating, these openings must

not be blocked or covered. The

openings should never be blocked

by placing the product on the bed,

sofa, rug, or other similar surface.

This product should never be placed

near or over a radiator or heat

12. Unplug this product from the wall

outlet and refer servicing to qualified

service personnel under the

following conditions:

placed in

built-in installation

unless proper ventilation is

provided.

A. When the power supply cord plug

is damaged or frayed.

B. If liquid has been spilled into the

product.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

C. If the product has been exposed to

rain or water.

CAUTION: TO REDUCE THE RISK OF

FIRE OR INJURY TO PERSONS BY

BATTERY, READ AND FOLLOWTHESE

INSTRUCTIONS.

D. If the product does not operate

normally by following the operating

instructions. Adjust only those

controls, that are covered by the

operating instructions because

improper adjustment of other

controls may result in damage and

will often require extensive work by

a qualified technician to restore the

product to normal operation.

1. Use only the appropriate type and

size battery pack specified in the

instruction manual provided for this

product.

2. Do not dispose of the battery pack in

a fire. The cell may explode. Check

with State and local codes for

possible

special

disposal

E. If the product has been dropped or

the cabinet has been damaged.

instructions.

3. Do not open or mutilate the battery

pack. Released electrolyte is

corrosive and may cause damage to

the eyes or skin. It may be toxic if

swallowed.

F. If the product exhibits a distinct

change in performance.

13. Do not use the telephone to report

a gas leak in the vicinity of the leak.

4. Exercise care in handling battery in

order not to short the battery with

conducting materials such as rings,

bracelets, and keys. The battery or

conductor may overheat and cause

burns.

5. Charge the battery pack provided

with or identified for use with this

product only in accordance with the

instructions and limitations specified

in the instruction manual.

6. Observe proper polarity orientation

between the battery pack and battery

charger.

SAVE THESE INSTRUCTIONS

Download from Www.Somanuals.com. All Manuals Search And Download.

GETTING STARTED

• Plug the AC POWER ADAPTER into a

live electrical outlet and the DC POWER

CONNECTOR into the back of the Base

Unit.

PLEASE NOTE THE

CORRECT POSITION

OF THE BATTERY

PACK WHEN INSTALLING

OUTLET

9V DC

TEL.LINE

SLIDE IN THE

BATTERY

COVER

• Slide the Handset battery cover down,

and remove it from the Handset

PRESS and SLIDE

DOWNWARD

• Place the Handset into the Base Unit

cradle. Make sure the Charging light is

illuminated. Charge for at least 16

hours before first using the phone.

The Handset can charge face up or

down.

• Install the BATTERY PACK, with the

metal contacts facing down and aligned

with the Handset contacts. Replace

Handset battery cover.

• Set the TONE/PULSE switch, located

on the antenna side of the Base Unit,

to the desired dialing mode. In most

areas, TONE is the desired mode.

RINGER

OFF LOW HI

PULSE

TONE

BASE RINGER

SWITCH

TONE/PULSE SWITCH

Download from Www.Somanuals.com. All Manuals Search And Download.

GETTING STARTED

• After charging the battery pack, con-

nect the telephone line cord to a live

telephone outlet and the TEL. LINE

jack, located on the back edge of the

Base Unit.

• If your Base Unit is not connected to a

live telephone outlet, the Handset will

display:

CHECK TEL. LINE

9V DC

TEL.LINE

For best results, raise the antenna on the

Base Unit and Handset when using

the phone.

Download from Www.Somanuals.com. All Manuals Search And Download.

WALL MOUNTING

The Wall Mounting bracket is

designed to fit on standardWall Mount-

ing plates

1. Choose a spot near an electrical

outlet and a telephone jack.

Your phone requires

telephone jack and

modular

standard

BASE

UNIT

electrical outlet (120v AC). The power

cord is six feet long; make sure there

is an electrical outlet within reach of

the Base Unit. The outlet should not

be controlled by a wall switch. If the

switch is ever turned off, the phone

will not operate.

WALL

MOUNT

2. Position the wall mount bracket on

the base.

Line up the tabs on the wall mounting

bracket with the holes on the bottom

of the base. Snap the wall mounting

bracket firmly into place.

3. Mount the base on the wall.

Position the base so the mounting

studs will fit into the holes on the

bottom of the base. Position the

power cord to extend down the wall.

Slide the base down on the mounting

studs until it locks into place.

WALL

4. Connect the telephone line cord.

Insert one end into the TEL.LINE

jack on the back edge of the base.

Insert the other end into the wall

jack.

5. Plug the AC adapter into an electrical

outlet and the DC connector into the

power jack located on the back of

the Base Unit .

Download from Www.Somanuals.com. All Manuals Search And Download.

HANDSET UNIT KEYS AND FEATURES

ANTENNA

VOLUME UP & DOWN

HEADSET

JACK

BATTERY COMPARTMENT

CHRISTOPHER DOW

1-123-456-7890

DISPLAY

BACK

Select

FORWARD

SELECT

Speaker

Flash

ABC

PHONE

Flash

OFF

OFF KEY

SPEAKER

DEF

PHONE

MNO

WXYZ

GHI

PQRS

JKL

TUV

OPER

DIALING KEYS (0-9, ,#)

INTERCOM

PROGRAM

REDIAL/PAUSE

3-WAY CALL

Intercom

Redial/

Pause

Mute/

Hold

Program

REPEAT DIAL

Return

Call

Repeat

Dial

3-Way

Call

RETURN CALL

MUTE/HOLD

TONE KEY (Temporary Tone)

Download from Www.Somanuals.com. All Manuals Search And Download.

BASE UNIT KEYS AND FEATURES

ANTENNA

LINE IN USE INDICATOR

CHARGING INDICATOR

SPARE BATTERY INDICATOR

VOICE MAIL INDICATOR

REDIAL/PAUSE

PROGRAM

HOLD

MUTE

MEMORY

SPEAKERPHONE

INTERCOM

VOLUME UP

VOLUME DOWN

FLASH

RINGER

OFF LOW HI

PULSE

TONE

BASE RINGER

SWITCH

TONE/PULSE SWITCH

9V DC

TEL.LINE

DC POWER CONNECTOR

PHONE CORD JACK

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC TELEPHONE OPERATIONS

• Press

until the desired location is

AREA CODE PROGRAMMING

To benefit from all the Caller ID features

of your telephone, you must enter your

home area code.

blinking (#1…..#5).

• Press Select . ENTER AREA CODE is

displayed.

• Enter a “local” area code.

• Press Select.

If you live in an area where you dial calls

within your own area code by dialing 7

digits (no area code), follow these steps

(with the Handset OFF ):

NOTE: To replace or edit an existing area

code, use the

ing digits, and enter the desired area

code. Press Select when done.

key to delete the exist-

• Press Program.

• Press

until AREA is blinking.

• Press Select.

• HOME should be blinking. If not, press

until it blinks.

MAKING CALLS

• Press Select. ENTER AREA CODE is

displayed.

• Enter your own home area code.

• Press Select.

Handset: Press PHONE. Listen for Dial

Tone. Dial the phone number. Press OFF

to end your call.

Cordless Speakerphone:

Press SPEAKER on the Handset. Dial

the number. The Handset can now be

used as a cordless speakerphone. You

can hold it in your hand or place it stand-

ing up on a table. To end a call, press

OFF.

LESS COMMON ALTERNATIVE

If you live in an area where all local calls

require 10 digits (area code plus phone

number, without dialing “1” first:)

• Press Program.

• Press

until AREA is blinking.

• Press Select.

• HOME should be blinking. If not, press

until it blinks.

• Press Select. ENTER AREA CODE

is displayed.

• Enter 000.

CALLTIMER

While the Handset is ON, the approxi-

mate duration of your call is displayed.

Base Unit Speakerphone:

Press Speakerphone on the base. Dial

the number. To end a call, press Speak-

erphone again.

• Press Select and continue below.

You may program up to 5 local area

codes. An area code is “local” if you do

not dial “1” when you make calls to that

area code. In other words, you make calls

to “local” area codes by dialing 10 digits

(area code plus phone number) without

a preceding “1”. This might include your

own area code

SPEAKERPHONE TIPS

If you use your Speakerphone in a noisy

environment, the other person’s voice

may fade out. In this case, try eliminating

the environmental noise (a television or

radio playing, for example). Otherwise,

press Mute while the other person is

speaking. Before you start to talk, press

Mute again so the other person can hear

you.

• Press Program.

• Press

until AREA is blinking.

• Press Select.

• Press

until LOCAL is blinking.

Press Select.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC TELEPHONE OPERATIONS

REDIAL/PAUSE

Press PHONE or the Handset Speaker

key.

HANDSET VOLUME

CONTROL

Press Redial/Pause.

The last number you called will be

redialed.

ANSWERING CALLS

Handset: Press PHONE. TALK is dis-

played on the Handset. Press OFF to

end your call.

Cordless Speakerphone: Press

Speaker on the Handset. The Handset

answers the call as a cordless speaker-

phone. You can hold it in your hand or

place it standing up on a table. To end a

MUTE

call, press OFF.

When you mute a call, the other person

cannot hear you, but you can hear them.

To mute a Handset call, press Mute/Hold

during the call. The Handset will display

MUTE. You can still hear the other per-

son talk, but they cannot hear you. Press

Mute/Hold again to return to normal 2-

way conversation.

Base Unit Speakerphone: Press Speak-

erphone on the Base. To end the call,

press Speakerphone again.

LINE IN USE

The LINE IN USE indicator on the Base

Unit will illuminate when the Handset, or

an extension phone sharing the same line

is in use.

HOLD

To put a Handset call on hold, press and

hold the Mute/Hold key for 2 seconds.

The Handset will display HOLD. Neither

you nor the other person can hear eath

other. Press PHONE or Speaker to re-

turn to normal 2-way conversation.

BASE IN USE

In the OFF (on hook) mode, the Handset

will display BASE IN USE if the Base

Speakerphone is in use.

CALL WAITING

HANDSET VOLUME

Adjust the Handset volume with the

If you subscribe to Call Waiting, you will

hear a tone when you receive a second

call while on the phone. If you subscribe

to Caller ID on Call Waiting, the Handset

displays who is calling before you an-

swer.

and

keys, located on the side of the

Handset. There are 4 volume levels.

To answer Call Waiting during a normal

handset call, press PHONE. To answer

during a Handset Speakerphone call,

press Speaker. To answer during a Base

Unit Speaker call, press Flash on the

Base.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC TELEPHONE OPERATIONS

Voice MailTips:

PAGING THE HANDSET

•To make the Handset ring, press

Intercom on the Base.

•To stop the ringing, press OFF on the

Handset.

After hearing your messages, wait until

the Voice Mail indicators turn off before

you make another call. This will ensure

the indicators do not remain on after the

messages are reviewed.

INTERCOM

If, after reviewing all new voice mes-

sages, the Handset or Base Unit Voice

Mail indicator remains on, using the

Handset, follow these steps:

(Conversation between the Base and

Handset)

From the Handset: Press Intercom.

The Base Unit will ring, and the intercom

call will be automatically connected.

•Press Program.

•Press #. The Handset displays:

From the Base: Press Intercom. The

Handset will ring. To answer the call,

press Intercom on the Handset.

MESSAGE WAITING

LIGHT-OFF

To end an Intercom call, press OFF on

the Handset or Intercom on the Base.

•With LIGHT-OFF flashing, press Select.

VOICE MAIL INDICATOR

If you have new messages, but the Voice

Mail indicators do not turn on, ask your

phone company to make sure your

Voice Mail service has Visual Message

Indication assigned.

If you subscribe to Voice Mail, the Voice

Mail light on the Base Unit will flash when

you have new messages. The Handset

will display:

MESSAGE WAITING

SETTING THE HANDSET RINGER

•Press Program.

•Press

until RINGER is blinking.

•Press Select. TYPE is blinking.

Once you have reviewed your new mes-

sages, the MESSAGE WAITING indica-

tion on the Handset, and the Voice Mail

light on the Base will turn off.

•Press Select.

There are 4 ringer styles. The current

setting is blinking.

•Press

to hear the other ring

styles OR turn the Handset ringer OFF.

•When the desired ringer type is blink-

ing, press Select.

VOICE MAIL Light

To turn the Handset ringer ON again,

follow the steps in, “Setting the Handset

Ringer”.

HANDSET RINGER VOLUME

•Press Program.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC TELEPHONE

OPERATIONS

CALLER ID

•Press

•Press Select.

until RINGER is blinking.

This telephone provides three types of

Caller ID:

•Press

•Press Select.

•Press

ringer volume.

until VOL is blinking.

Caller ID: Displays the name and

number of each caller after the

phone begins ringing (requires Caller

ID service from your telephone

company).

to raise or lower the

•When the desired setting is blinking,

press Select.

Caller ID on Call Waiting: Shows the

name and number of each caller on

Call Waiting after you hear the Call

Waiting tone (requires Caller ID on

Call Waiting service).

BASE UNIT RINGER

The Base Unit ringer volume is con-

trolled by a switch on the right edge of

the Base. It can be set to Off, Low, or

High volume.

Voice Announce: Announces aloud

the name or number of each caller

while displaying it on the Handset

(requires Caller ID service).

HANDSET SPEAKERPHONE FEATURE

PHONE

Flash

Speaker

OFF

ABC

DEF

SPEAKER KEY

GHI

PQRS

JKL

TUV

OPER

MNO

WXYZ

The phone has a Call Log, which stores

the name, number, date, and time of the

last 50 calls received. You can review

the Call Log to see who called while

you were out. You can speed-dial num-

bers from the Call Log. And you can

store names and numbers from the Call

Log into your directory.

Intercom Program Redial/

Mute

Pause

Billed Services

69 Auto

Repeat

Dialing

3-Way

Dialing

Callback

Press the Speaker to make or answer a

call using the Handset Speakerphone.

The Handset displays SPEAKER-

PHONE. You can now talk hands-free,

away from the Base Unit. Press OFF to

end a call.

REVIEWINGTHE CALL LOG

With the Handset OFF:

Call Waiting: If you hear a Call Waiting

tone during a speakerphone call, press

the Speaker key to answer it. (Do not use

the PHONE key to answer Call Waiting

while using the speakerphone.)

• Press

. You will see the

number of NEW (not viewed) and OLD

(previously viewed) calls.

• Continue to press

the callers.

to review

Switching from Speakerphone to Ear-

piece: At any time during a Handset

speaker call, you can press PHONE to

switch to a non-speaker call. The Hand-

set will display TALK, and you can hold

the handset to your ear normally. Press

Speaker whenever you want to change

back to the Speakerphone. The Handset

will display SPEAKERPHONE.

Some locations are not equipped to send

Caller ID information when a person

places a call. When you receive calls from

such locations, your phone will display

UNAVAILABLE.

If a caller purposely blocks their phone

number from being delivered by Caller

ID, your phone will display PRIVATE.

HINT: If an x_ follows the phone number

Download from Www.Somanuals.com. All Manuals Search And Download.

CALLER ID

If you want the phone to announce

names, you must record some spoken

names with the numbers in your Direc-

tory. See the section “DIRECTORY:TO

STORE A NAME, NUMBER, ANDVOICE

ANNOUNCE RECORDING”.

(x3 for example) it indicates the party has

called more than once.

JOHN SMITH

123-4567

When you first receive the phone, it is set

to announce ALL CALLS. It will an-

nounce the caller’s name if you have re-

corded it, or the phone number if you

haven’t recorded a name.

ERASING CALLS

To erase a call; with the Handset OFF:

• Press or until you see the call

you want to erase.

• Press Select.

• Press

Select.

• Press

until ERASE is blinking. Press

If an inbound call has the Caller ID infor-

mation blocked, the Base Unit will an-

nounce “PRIVATE CALLER ”.

until YES is blinking.Then

press Select.

If the Caller ID information unavailable

(both name and number), the Base Unit

will announce “UNKNOWN CALLER ”.

To erase your entire Call Log; after you

have viewed all calls and the handset

is off:

• Press

in the log.

• Press Select.

until you see any call

You can choose to turn off Voice

Announce, or to announce only your

pre-recorded names. The Handset will

still display all Caller ID information.

• Press

Select.

• Press

until ERASE is blinking. Press

until ALL is blinking.Then

To turn Voice Announce ON or OFF:

• Press Program.

press Select .The handset displays:

• Press

ing.

until ANNOUNCE is blink-

RECORD NAME?

YES NO

• Press Select. You will see three

announcement options:

• Press

press Select.

until YES is blinking.Then

ALL CALLS

NAMES ONLY OFF

SPEED DIALING FROM CALLER ID

With the Handset OFF:

ALL CALLS: Announces names that you

have recorded, and phone numbers for

all other callers.

• Press

until you see the de-

sired caller.

• Press PHONE.You will hear a dial tone,

and the number will be dialed

automatically.

NAMES ONLY: Announces names that

you have recorded. If you have not re-

corded a caller’s name, you will not hear

anything.

VOICE ANNOUNCE CALLER ID

If you subscribe to Caller ID, the Base

unit can announce each caller’s name or

number aloud while displaying it on the

Handset.

OFF: Nothing is announced aloud.

• Press

until the desired option is

Download from Www.Somanuals.com. All Manuals Search And Download.

DIRECTORY

blinking.

When the name is complete, press

• Press Select. The Handset will beep

and turn off automatically.

Select.The screen will display:

DEAN

You can store the names and phone

numbers of up to 50 frequently called

people. Each name can be up to 16

characters. Each phone number can be

up to 32 digits.

ENTER NUMBER

Enter the phone number. Press Redial/

Pause if you need to enter a 2-second

pause in the dialing sequence. (For

example, you might store a voice mail

access number, pause, password.)

TO STORE A NAME, NUMBER, AND

VOICE ANNOUNCE RECORDING:

• Press Program. DIRECTORY will be

blinking.

• Press Select.

When the phone number is complete,

• The screen will display ENTER

NAME.

press Select .

The display shows:

Use the Dialing keys to enter the desired

name. Press the key until the desired

letter or character appears. A guide to

the characters:

RECORD NAME?

YES NO

KEY

C H A R A C T E R S

You can record your voice saying the

person’s name. If you subscribe to

Caller ID, the phone will play your

recording when this person calls, so that

you can hear who’s calling without

seeing the Caller ID display.

A>B>C>2

D>E>F>3

G>H>I>4

J>K>L>5

M>N>O>6

P>Q>R>S>7

T>U>V>8

W>X>Y>Z>9

If you do not want to record a name:

• Press

until NO is blinking. press

Select.

To record a name:

& ’ , - . # @

• Press Select while YES is blinking.

Speak after the beep.

• You can press Select when you’re

finished speaking; OR, just wait -

If consecutive characters are found on

the same key (D and E, for example),

you’ll need to press

to advance to

recording ends after

seconds.

the next space. For example, to enter the

name DEAN:

To hear your recording:

The Handset shows:

Press

(D)

Press

3 twice

6 twice

(E)

(A)

(N)

PLAY NAME? YES

NO REDO ERASE

Download from Www.Somanuals.com. All Manuals Search And Download.

DIRECTORY

Press Select while YES is blinking.

RECORD NAME?

YES NO

To make a new recording of the name:

Press

until REDO is blinking. Press

Select. Speak after the beep. You can

re-record as many times as you want.

Each time you re-record or review the

name, the Handset shows:

You will then hear a long beep. The

name and number have been stored in

the Directory. If you want to record this

person’s name for Voice Announce

Caller ID, you will need to edit the entry

and add a recording at that time. See

the section, “Editing a Directory Entry.”

PLAY NAME? YES

NO REDO ERASE

MAKING

DIRECTORY

CALLS

When

you are satisfied with your

recording:

•

Press Select. DIRECTORY will

appear.

• Press

• Press Select .

until NO is blinking.

Press

to scroll to the desired

name; or, search by entering the first

letter of the name, and then press

REVIEWING

ANNOUNCE” NAMES

YOUR

“VOICE

if necessary.

•

Press PHONE. You will hear a dial

tone, and the number will be dialed.

• Press Select . DIRECTORY will be

blinking.

• Press

desired name.

until you see the

EDITING

DIRECTORY ENTRY

• Press # . The recording will play.

• Press Select . The Handset says

DIRECTORY.

STORING A CALLER ID RECORD IN

THE DIRECTORY

• Press

to scroll to the

name; or,

desired

search by entering the first

letter of the name, and then press

or if necessary.

• Press Select .

With the Handset OFF:

• Press

until you see the

desired call.

• Press Select .

• Press

until EDIT is blinking.

• Press

until EDIT is blinking.

• Press Select .The name appears.

• If you want to edit the name, press

to erase letters. Use the dialpad to

enter new letters. When the name is

correct, press Select .

Press Select .

If you want to edit the name, press

to erase letters. Use the dialpad to enter

new letters. When the name is correct,

press Select .

The number appears. If you want to edit

If you want to edit the number, press

to erase digits. Use the dialpad to enter

new digits. When the number is correct,

press Select .

the number, press

to erase digits.

Use the dialpad to enter new digits.

When the number is correct, press

Select.

Download from Www.Somanuals.com. All Manuals Search And Download.

DIRECTORY

The handset displays several options

that let you hear the recorded name or

re-record or erase it. Press

until the desired option is blinking.

Press Select .

ERASING A DIRECTORY ENTRY

• Press Select .

• Press

to scroll to the desired

name; or, search by entering the first

letter of the name, and then press

if necessary.

• Press Select .

• Press

until ERASE is blinking.

• Press Select. Press

blinking.

until YES is

• Press Select .

PROGRAMMING SPEED DIAL NUM-

BERS IN THE BASE UNIT

With the Base Unit OFF:

• Press Program

• Press Memory

• Enter desired Location (0-9)

• Enter the Phone Number

• Press Program

SPEED DIALING FROMTHE BASE UNIT

• Press Speakerphone

• Press Memory

• Enter Location (0-9)

Download from Www.Somanuals.com. All Manuals Search And Download.

HEADSET OPERATIONS

Your Sprint cordless

phone is

For maximum sound quality, the flexible

microphone should be positioned at the

corner of your mouth, about one inch from

your face.

equipped with a 2.5mm Headset Jack for

use with an optional accessory Headset

for hands-free operation.

If you choose to use the Headset option,

you must obtain an optional accessory

Headset, which is compatible with the

Sprint cordless phone.

To purchase a Headset, please visit

your local Sprint store or call VTech

at 1-800-624-5688.

Once you have a compatible 2.5mm

Headset, locate the Headset Jack on

the Sprint cordless phone Handset.

Connect the plug on the Headset cord

to the jack on the cordless Handset.

The plug should fit securely. Do not

force the connection.

BELT CLIP

The Sprint cordless phone is also

equipped with a detachable belt clip.

Align the pins on the inside edge of the

clip with the notches on the sides of the

Sprint cordless phone Handset.

The belt clip should snap securely into

place. Do not force the connection.

OPERATION

NOTE: Whenever a compatible Headset

is connected to the cordless Handset, the

microphone on the Handset will be muted.

This is done to limit the effect of back-

ground noise.

The following operational characteristics

also apply to other headsets which are

not sold by Sprint; however, Sprint

assumes

no responsibility for their

performance.

The Sprint

compatible

Headset

has a reversible, monaural design. You

can wear your Headset on either ear,

leaving one ear free for room conversa-

tion.

The headband can be adjusted to fit the

contour of your head. Using both hands,

slide the headband up or down so that it

rests comfortably on your head, with the

speaker cushion centered against your

ear.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADDITIONALOPERATIONS

people. Press 3-Way Call again to drop

the last person. Press OFF to end your

call.

PAY PER USE FUNCTIONS

The Handset provides 3 keys that give

you easy access to convenient custom

features:

POWER BACKUP

Return Call

Repeat Dial

3-Way Call

When the second battery is installed in

the Base Unit, your Sprint cordless

telephone uses this battery to provide

operational backup during a power

failure. If you have a fully charged battery

pack in the Base Unit charger, you will

be able to place and receive calls from

the Handset for up to 5 hours.

NOTE: You can subscribe to any of

these services for a monthly fee. If you

do not subscribe, a fee is charged to your

phone bill when you use the services.

For specific information about rates,

contact your local telephone company.

Note:

During power backup mode, the Base

Unit functions are not operable, In

addition, Caller ID information may not

be reliable.

RETURN CALL

This key will dial the last person who

called you, whether you answered the

call or not. (This is most useful if you

do not subscribe to Caller ID.)

REPLACING A DRAINED HANDSET

BATTERY

The second battery pack can also be

used to replace a drained Handset

battery, to ensure uninterrupted use. Be

sure to put the drained battery pack in

the Base Unit charger for recharging.

REPEAT DIAL

This key will repeatedly dial the last

number you called. For example, if you

dial a number that’s busy, press OFF,

then Repeat Dial, then OFF again. For

up to 30 minutes, your line will keep

trying to reach the number. When it gets

through, your phone will ring to let you

know. Press PHONE and wait for the