®
Sony Wireless Network Speakers
Easy to set up. Easy to use.
PC or Mac,play music anywhere
®
your Wi-Fi goes—even outside.
SA-NS300
SA-NS400
SA-NS500
STEP 1: Introduce your speaker to your router.
Before you begin, make sure your router and computer are on and connected.
(
)
OPTION 1: Automatic Wired Set-up easy 2-step method
1.Turn speaker on: 2. Connect speaker and computer to router.
Ethernet
Cable
Router/
Access Point
SA-NS300, SA-NS400
On back near base.
(
)
included
To
Computer
(
)
SA-NS500 2 buttons
On bottom.
Both buttons need to
be in the up position
for sync only.
When“LINK”light on speaker turns orange, unplug the
®
(
)
cable. System will reboot/sync to Wi-Fi green light .
®
(
)
OPTION 2: “WPS”Push-button Set-up Wi-Fi Protected 3-step method
1.Turn speaker on:
2. Press“WPS”button 3. Press/hold“WPS”
(
)
on router:
button for 3 sec.
SA-NS300, SA-NS400
On back near base.
on back of speaker
Router/Access Point
The WPS button may vary.
Check your router manual.
(
)
SA-NS500 2 buttons
On bottom.
Both buttons need to
be in the up position
for sync only.
When“LINK”light on speaker turns orange,
system will reboot/sync to Wi-Fi green light .
®
(
)
IMPORTANT NS500 ONLY: After connection is made, switch bottom button
down to NETWORK STANDBY MODE to play.
Additional set-up methods for any router, computer and most operating systems are detailed in the
operating instructions manual in the box. Also enclosed is a Quick-Start Guide for PC and Mac.
Download from Www.Somanuals.com. All Manuals Search And Download.
|