3-097-195-11(2)
Micro HI-FI
Component System
Operating Instructions
Owner’s Record
e model and serial numbers are located on the rear of the unit. Record these
numbers in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. ______________ Serial No. ______________
CMT-DH7BT
© 2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
About this manual
Icons, such as
, listed at the top
of each explanation indicate what kind
of media can be used with the function
being explained.
is equipment must not be co-located or
operated in conjunction with any other
antenna or transmitter.
e English on-screen display is used
for illustration purposes only.
is equipment complies with FCC
radiation exposure limits set forth for
uncontrolled equipment and meets the
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65.
is equipment has a very low RF energy
level that is deemed to comply with
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65
without maximum permissive exposure
evaluation (MPE). But it is desirable that
it should be installed and operated with at
least 20cm and more between the radiator
and person’s body (excluding extremities:
hands, wrists, feet and legs).
e Control Menu items may be
different depending on the disc.
e Setup Menu items may be different
depending on the area.
ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable discs
Type
Icon used in
this manual
Characteristics
Logo
DVD VIDEO
DVD VIDEO
DVD-R*/-RW*/+R/+RW
in DVD VIDEO format
also in video mode
*
VR mode
DVD-R/-RW
in VR (Video Recording) mode
VIDEO CD
VIDEO CD
Super VCD*
CD-ROM*/-R*/-RW*
in VIDEO CD or Super VCD format
*
*
CD
AUDIO CD*
CD-R*/-RW*
in AUDIO CD format
DATA CD
CD-ROM/-R/-RW
in DATA CD format, containing
MP3 audio tracks1) and/or JPEG
image files2), and conforming to
ISO 96603) Level 1 or Level 2, or
Joliet (expansion format).
DATA DVD
DVD-ROM/-R/-RW/+R/+RW
in DATA DVD format containing
MP3 audio tracks1) and/or JPEG
image files2), and conforming to
UDF (Universal Disk Format).
is system can also play back discs with the following disc logos:
1)
MP3 (MPEG 1 Audio Layer 3) is a standard format defined by ISO/MPEG which compresses audio
data. MP3 audio tracks must be in MPEG 1 Audio Layer 3 format.
JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera
File System”: Image standards for digital cameras regulated by Japan Electronics and Information
Technology Industries Association (JEITA)).
A logical format of files and folders on CD-ROMs, defined by ISO (International Organization for
Standardization).
2)
3)
“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD VIDEO,” and the “CD” logos are trademarks.
ꢃGB
Continued
Download from Www.Somanuals.com. All Manuals Search And Download.
Discs that cannot be played
Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback
on this product is not guaranteed.
CD-ROMs recorded in PHOTO CD
format
DATA CDs recorded in MP3 PRO
format
Data part of CD-Extras1)
Data part of Mixed CDs2)
Super Audio CDs
DVD Audio discs
DVD-RAMs
A DVD VIDEO with a different region
code.
A disc that has a non-standard shape
(e.g., heart, square, star).
A disc that has the adhesive cellophane
tape or a sticker still leſt on it.
Notes on CD-R/-RW and
DVD-R/-RW/+R/+RW
In some cases, CD-Rs/-RWs and
DVD-Rs/-RWs/+Rs/+RWs cannot be
played back on this system due to the
recording quality or physical condition
of the disc, or the characteristics of
the recording device and authoring
soſtware. e disc will not be played
back if it has not been correctly
finalized. For more information, see
the operation instructions for the
recording device.
1)
CD-Extra: is format records audio
(AUDIO CD data) on the tracks in session 1
and data on the tracks in session 2.
2)
Mixed CD: is format records data on the
first track and audio (AUDIO CD data)
on the second and subsequent tracks of a
session.
Note that some playback functions
may not work with some DVD+Rs/
+RWs, even if they have been correctly
finalized. In this case, view the disc by
normal playback.
A disc created in Packet Write format
cannot be played back.
Region code of DVD VIDEOs you
can play back on this system
Your system has a region code printed
on the back of the unit and will only
play back DVD VIDEOs labeled with
identical region code.
DVD VIDEOs labeled
will also be
Note on playback operations of
DVD VIDEOs and VIDEO CDs
played back on this system.
If you try to play back any other region
code DVD VIDEO, the message
Some playback operations of DVD
VIDEOs and VIDEO CDs may be
intentionally set by soſtware producers.
“Playback prohibited by area limitations.”
will appear on the TV screen. Depending
on the DVD VIDEO, no region code
indication may be labeled even though
playing the DVD VIDEO is prohibited by
area restrictions.
ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Since this system play back DVD
VIDEOs and VIDEO CDs according to
the disc contents the soſtware producers
designed, some playback features may
not be available. Also, refer to the
instructions supplied with the DVD
VIDEOs or VIDEO CDs.
Copyrights
is product incorporates copyright
protection technology that is protected
by U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be
authorized by Macrovision, and is
intended for home and other limited
viewing uses only unless otherwise
authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Music discs encoded with
copyright protection technologies
is product is designed to play back
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some
record companies. Please be aware that
among those discs, there are some that
do not conform to the CD standard and
may not be playable by this product.
is system incorporates Dolby*
Digital and the DTS** Digital
Surround System.
*
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
** Manufactured under license from Digital
eater Systems, Inc.
“DTS” and “ DTS Digital Surround” are
registered trademarks of Digital eater
Systems, Inc.
Notes on Multi Session disc
e Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are those
of their respective owners.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and omson.
is system can play back Multi
Session discs when an MP3 audio track
(or a JPEG image file) is contained in
the first session. Any subsequent MP3
audio tracks (or JPEG image files)
recorded in later sessions can also be
played back.
e XM name and related logos are
registered trademarks of XM Satellite
Radio Inc.
If the first session is recorded in
AUDIO CD or VIDEO CD format,
only the first session will be played
back.
e system will recognize a Multi
Session disc as an AUDIO CD if there
is a session recorded in AUDIO CD
format on the disc. However, the
system will only play back the disc if
the first session is recorded in AUDIO
CD format.
(c) 2006 SIRIUS Satellite Radio Inc.
“SIRIUS” and the SIRIUS dog logo
are registered trademarks of SIRIUS
Satellite Radio Inc.
TM and marks are omitted in this
®
manual.
ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to parts and controls
is manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit (HCD-DH7BT/DVD Receiver)
Front panel
Top panel
ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control (RM-SCD30)
BLUETOOTH indicator (56, 57)
Lights up when the Bluetooth function
is active.
BLUETOOTH OPR (55, 56, 57)
Press to make a connection,
disconnection, or pairing with a
Bluetooth device.
(eject) (24)
Press to eject the disc.
Disc slot
+/ (21, 23, 53)
Press to select an album.
PRESET +/ (49)
Press to select the preset station.
/ (go backward/
forward) (23, 35, 55)
Press to select a track or file.
Remote: TV CH +/1) (19)
Press to change the TV channels.
Unit: (on/standby) (19, 20,
48, 59, 72)
Remote: SLOW
/
(24)
Press to watch the slow-motion play.
Remote: TUNING +/ (48, 49)
Press to tune in the desired station.
/ (rewind/fast forward)
(23, 55)
Remote: TV 1) (on/standby)
(19)
Press to turn on the system.
Press to turn on the TV.
Press to find a point in a track or file.
STANDBY indicator (66)
Lights up when the system is turned off.
Continued
ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit: AUDIO IN
Press to select the AUDIO IN function.
AUDIO IN jack (64)
Connect to an optional audio
component.
FUNCTION +/ (18, 23, 48, 53, 54,
56, 57)
Press to select the function.
PHONES jack
Connect the headphones.
Unit: REPEAT/FM MODE (30, 48)
Remote: FM MODE (48)
Remote: REPEAT (30)
DISPLAY (60, 61)
Press to display the disc information or
clock in the front panel display.
Press to select FM reception mode
(monaural or stereo).
Press to listen to a disc, a single track or
file repeatedly.
PROGRESSIVE (18, 64)
Press to change the output video format
(Interlace or Progressive format).
(stop) (23, 48, 55)
(pause) (23, 55)
DSGX (58)
Press to reinforce the bass.
Press to stop or pause playback.
Remote: 2) (play) (23, 28, 35,
42, 54)
Press to start playback.
IR Receptor
VOLUME +/2) (23, 49, 54, 57)
Press to adjust the volume.
TV VOL +/1)2) (19)
Unit: DVD (play) (18, 23)
Press to select the DVD function.
Press to start playback of a disc.
Press to adjust the TV volume.
Unit: BLUETOOTH (53, 54)
DIMMER (60)
Press to adjust the brightness of the
display.
Press to select the Bluetooth function.
Press to start playback of the music on
the Bluetooth device (Bluetooth mobile
phone, etc.).
PICTURE NAVI (33)
Unit: TUNER/BAND (48)
Press to select the VIEWER format for
Press to select the TUNER function.
Press to switch among FM, AM, XM and
SIRIUS band.
searching the chapters, titles and tracks.
Press to display the thumbnail pictures.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP/ STEP (24)
AUDIO (25, 63)
Press to display the current audio signal
on the TV screen.
Press to play one frame at a time when
playback is paused.
RETURN (26)
SUBTITLE (24)
Press to switch the language of the
subtitle (DVD VIDEO).
Press to return to the previous menu on
the TV screen.
/// (20, 27, 31, 35, 50, 59)
Press to select the MENU items.
ANGLE (24)
Press to change the angle (DVD VIDEO
with multi-angles only).
ENTER (19, 33, 49)
Press to enter the settings.
DVD TOP MENU (31)
DVD/TUNER MENU (31, 35, 37,
49, 50)
Press to display the DVD title on the TV
screen.
Press to display the MENU items on the
TV screen.
Press to preset the radio station.
CLEAR (28, 32, 50, 54, 56)
EQ (58)
Press to select the sound effect.
Press to delete a pre-programmed track
or file.
Press to delete a number entry.
Press to erase the pairing registration
information of the Bluetooth device.
-/--1)
DISPLAY (20, 27, 31, 37, 39, 43,
63)
Press to display the Control Menu on the
TV screen.
Press to enter a single digit or double
digit number.
Numeric buttons2) (19, 23, 26, 31,
40, 49, 50, 53)
TV1) (19)
Press to operate the TV functions.
Press to select a track, file or satellite
channel.
Press to enter a Parental Lock password.
Press to enter a Bluetooth passcode.
ADVANCE
Press to advance the current scene during
playback.
10/02)
(24)
Press to enter a double digit number.
REPLAY
(24)
Press to replay the previous scene during
playback.
Continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
XM (48)
Press to select XM band.
SIRIUS (48, 50)
Press to select SIRIUS band.
CATEGORY +/ (49)
Press to select a satellite radio category.
CATEGORY MODE (49)
Press to select the tuning mode for XM
or SIRIUS band.
TIME/TEXT (61)
Press to change the information in the
front panel display.
TV/VIDEO1) (19)
Press to switch the input sources.
SLEEP (59)
Press to set the Sleep Timer.
TIMER MENU (19, 59)
Press to set the clock and the timers.
THEATRE SYNC (22)
Press to activate the THEATRE SYNC
function.
1)
is button is used to operate a Sony TV. For
details, see “Operating a Sony TV” (page 19).
2)
e numeric button 5, TV VOL +,
VOLUME +
and
buttons have a
tactile dot. Use the tactile dot as a reference
when operating the system.
1ꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Indicates the selected function.
Indicates the selected play mode. (27)
Lights up when timer is set. (59)
Lights up when “P AUTO” or
“P VIDEO” is selected. (18)
Lights up when playing VIDEO CD
with PBC. (26)
Lights up when a station is tuned in.
Lights up when playing an MP3 audio
(48)
track. (35)
Lights up when DSGX is turned on.
Indicates the track/album
(58)
information.
Indicates the Playback status.
Lights up when DTS is selected. (47)
Lights up when chapter or title
number is displayed.
Lights up when Dolby Digital is
Indicates the type of disc being played
selected. (47)
back. (23)
Lights up when CATEGORY MODE
Displays the text information.
is selected. (49)
1ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system
Wall socket
or
Wall socket
Right speaker
Left speaker
SiriusConnect Home tuner (not supplied)
Satellite Radio Home Antenna (not supplied)*
AC power adaptor (not supplied)*
DIN cable (not supplied)*
XM Mini-Tuner and Home Dock (not supplied)
White side for North American model
Brown side for other regions
FM lead antenna (Extend it horizontally.)
AM loop antenna
FM/AM antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords and the power cord to avoid
picking up noise.
*
Supplied with SiriusConnect Home tuner
1ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
SIRIUS Tuner
If you do not use the remote for a long period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Connect the SiriusConnect Home tuner.
When you use the SiriusConnect Home
tuner with this system, be sure to connect
the AC power adaptor supplied with
the tuner to a wall socket. For detail, see
“Receiving the SIRIUS Satellite Radio”
(page 17).
Tip
With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
Keep the SiriusConnect Home tuner,
antenna, and AC power adaptor away
from the speaker cords and the power
cord to avoid picking up noise.
Attaching the speaker pads
XM antenna
Attach the supplied speaker pads at each
corner on the bottom of the speakers
to stabilize the speakers and to prevent
them from slipping.
Connect the XM Mini-Tuner and Home
Dock. For details, see “Receiving the XM
Satellite Radio” (page 16)
Speakers
Power
Connect the power cord to a wall socket.
If the supplied adaptor on the plug does
not fit your wall socket, detach it from
the plug (only for models equipped with
an adaptor).
When carrying this system
Perform the following procedure to
protect the DVD mechanism.
Use buttons on the unit for the
operation.
Inserting two R6 (size AA)
batteries into the remote
Slide and remove the battery
compartment lid, and insert the two
supplied R6 (size AA) batteries, side
first, matching the polarities shown
below.
to turn on the
system, then press DVD
1
Press /
.
2
Make sure that no disc is loaded
in the system and check that “No
Disc”appears.
to turn off the
system and check that “STANDBY”
disappears.
3
4
Press /
Unplug the power cord.
Continued
1ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
ere are three places to find your eight
character XM Radio ID: on the XM
Mini-Tuner, on the XM Mini-Tuner package,
and on XM Channel 0. Record the Radio ID in
the following eight squares for reference.
Receiving the XM Satellite
Radio
ABOUT XM SATELLITE RADIO
XM offers over 170 digital radio channels: the
most commercial-free music channels, premier
news, sports, talk, and traffic and weather in
21 metro markets. XM’s on-air hosts broadcast
live from studios in Washington, D.C., New
York City and Nashville.
Note: e XM Radio ID does not use the
letters “I”, “O”, “S” or “F.” Activate your XM
Satellite Radio service in the U.S. online
1-800-XM-RADIO (1-800-967-2346). You
will need a major credit card. XM will send
a signal from the satellites to activate the full
channel lineup. Activation normally takes 10
to 15 minutes, but during peak busy periods
you may need to keep your XM Ready home
audio system on for up to an hour. When you
can access the full channel lineup on your XM
Ready home audio system you are done.
For more information or to subscribe in the
US, visit xmradio.com or call Listener Care at
1-800-XMRADIO (1-800-967-2346).
XM READY® LEGAL
XM monthly service subscription sold
separately. XM Mini-Tuner and Home Dock
required (each sold separately) to receive
XM service. Installation costs and other fees
and taxes, including a one-time activation
fee may apply. Subscription fee is consumer
only. All fees and programming subject to
change. Channels with frequent explicit
language are indicated with an XL. Channel
blocking is available for XM radio receivers by
calling 1-800-XMRADIO (1-800-967-2346).
For a full listing of the XM commercial-free
channels and advertising supported channels,
visit lineup.xmradio.com. Subscriptions
subject to Customer Agreement available at
xmradio.com. XM service only available in
the 48 contiguous United States. XM Satellite
Radio and XM Ready are trademarks of XM
Satellite Radio Inc. (C)2006 XM Satellite Radio
Inc. All rights reserved.
XM READY® SUBSCRIPTIONS
Once you have installed the XM Mini-Tuner
Dock, inserted the XM Mini-Tuner, connected
the XM Dock to your XM Ready home audio
®
system, and installed the antenna, you are
ready to subscribe and begin receiving XM
programming.
1ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving the SIRIUS Satellite
Radio
Hooking up the TV
Connect the video input jack of your
TV to the VIDEO OUT jack with the
supplied video cord.
SIRIUS Satellite Radio: The Best Radio
On Radio
SIRIUS brings all your favorite entertainment
including 100% commercial-free music, plus
superior sports coverage, uncensored talk and
comedy, world-class entertainment, news,
weather and more for your car, home or office.
Sirius is available in the US for subscribers with
addresses in the continental US and is available
in Canada for subscribers with a Canadian
address. Required subscription plus compatible
SiriusConnect Home Tuner with antenna
are required and sold separately. SIRIUS
Programming is subject to change. Visit sirius.
com or siriuscanada.ca for the most complete
and up-to-date channel lineup and product
information. “SIRIUS” and the SIRIUS dog
logo and related marks are trademarks of Sirius
Satellite Radio Inc. All rights reserved.
To Subscribe to SIRIUS Satellite Radio
Purchase and connect a SiriusConnect Home
Tuner to your Sirius Ready home audio system.
You are then ready to activate and subscribe to
Sirius by either calling 1.888.539.SIRIUS (7474)
or log on to sirius.com. It is that easy.
When connecting a video deck
Connect the video deck to the TV using
a video cord (not supplied). However, do
not connect this unit to the TV through
the video deck. Otherwise, you may
experience video leakage when watching
video images from this system. Connect
this unit directly to the TV as shown
below.
TV
Video deck
Unit
Do not connect
directly
Continued
1ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
P VIDEO (PROGRESSIVE VIDEO):
e system fixes the conversion
method to PROGRESSIVE VIDEO
for video-based soſtware.
For higher quality video images:
Use the optional component video cords to
connect the COMPONENT VIDEO input
jacks on your TV to the COMPONENT
VIDEO OUT jacks of this unit. If your
TV is compatible with progressive format
Select this if the image is not clear
when you select “P AUTO.”
file signals, use this connection and press
About DVD VIDEO software types and
the conversion method
PROGRESSIVE
on the unit repeatedly
until “P AUTO” or “P VIDEO” appears in
the display (see below).
e DVD VIDEO soſtware can be
divided into 2 types:
You can use an optional S Video cord to
connect the S VIDEO input jack on your
TV to the S VIDEO OUT jack of this unit.
Film-based soſtware
Film-based soſtware is derived from
film and displays the images at 24
frames per second.
Video-based soſtware
Changing the format of the
video signal output from
COMPONENT VIDEO OUT jacks
Video-based soſtware is derived from
TV, such as dramas and sitcoms and
displays images at 30 frames or 60
fields per second.
Progressive is a method for displaying
TV images that reduces flickering and
sharpens the image. To use this method,
you need to connect to a TV that can
accept progressive signals.
Some DVD VIDEO contains both types
of soſtware. In order for these images to
appear in your TV naturally when the
video output is in progressive format, the
progressive signals need to be converted
to match your DVD VIDEO soſtware.
You can output video signals from
COMPONENT VIDEO OUT jacks in
Interlace or Progressive format.
Note
ere would be no image on your TV or the
image is not clear if your setting does not
match your TV or connection.
1
Press FUNCTION +/
repeatedly to select “DVD”(or
press DVD
on the unit).
2
Press PROGRESSIVE
unit repeatedly.
on the
Select “P AUTO” or “P VIDEO” if
your TV accepts progressive signals
and the TV is connected to the
COMPONENT VIDEO OUT jacks.
Otherwise, select “INTERLACE.”
P AUTO (PROGRESSIVE AUTO):
e system automatically detects
the soſtware type and selects the
appropriate conversion method.
1ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
When using a TV
Setting the clock
Turn on the TV and select the video
input so that you can view the pictures
from this system.
Use buttons on the remote to set the
clock.
1
2
Press /
system.
to turn on the
Operating a Sony TV
You can use the following buttons to
operate a Sony TV. ese buttons have
been marked in orange.
.
Press TIMER MENU
e hour indication flashes in the
display.
To
Press
If “PLAY SET?” flashes in the
Turn the TV on
or off
TV /
while
display, press or
repeatedly
holding down
to select “CLOCK SET?,” then press
.
TV
TV/VIDEO
while holding down
ENTER
.
Switch the TV’s
input source
between the TV
and other input
sources
3
4
Press or
repeatedly to set
.
TV
the hour.
Press ENTER
.
Select the TV
channels
TV CH +/
e minute indication flashes in the
or numeric
display.
buttons * while
holding down
TV
repeatedly to set
5
6
Press or
.
the minutes.
Adjust the
TV VOL +/
volume of the TV while holding down
Press ENTER
.
.
speaker(s)
TV
e clock starts functioning.
* For double digit number, hold down TV
Note
and press -/-- , then press the number.
e clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
,
(For example, hold down TV
press -/-- , then 2 and 5 for entering 25.)
To display the clock when the system
is off
Press DISPLAY
.
e clock is displayed for about
8 seconds.
1ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Press or
repeatedly to
Performing QUICK
SETUP
select a language, then press
.
ENTER
e setting is selected and “SCREEN
SETUP” appears on the TV screen.
Tips
e selected language is for “OSD,”
“MENU” and “SUBTITLE .”
Before using the system, you can make
the minimum basic adjustments in
QUICK SETUP. If you do not want
to perform QUICK SETUP, press
e selectable language is different
depending on the area.
CLEAR
in step 3. e guide message
will disappear from the TV screen.
1
2
Turn on your TV and select the
video input.
Press or
repeatedly to
select the setting that matches
your TV type.
Press /
system.
Note
to turn on the
If you have a ꢂ:ꢁ standard TV:
Select “4:3 LETTER BOX” or “4:3
PAN SCAN” (page 45)
Make sure there is no disc in the unit.
Otherwise, the guide message does not
appear. To perform QUICK SETUP, press
If you have a wide-screen TV or a
ꢂ:ꢁ standard TV with wide-screen
mode:
on the unit to remove the disc.
Select “16:9” (page 45)
3
4
Press FUNCTION +/
repeatedly to select “DVD”(or
on the unit).
e guide message appears at the
.
7
Press ENTER
press DVD
e setting is selected and “QUICK
SETUP is complete.” appears on the
TV screen.
e system is ready for playback.
If you want to change each setting
individually, see “Using the DVD
setup menu” (page 43).
bottom of the TV screen.
Press ENTER
without
inserting a disc.
“LANGUAGE SETUP” appears on
the TV screen.
To quit QUICK SETUP
Press DISPLAY
.
ꢀ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To recall QUICK SETUP display
Using the THEATRE
SYNC function
THEATRE SYNC allows you to turn on
your Sony TV and this system, changes
the system’s function to “DVD” and then
switches the TV’s input source you have
set with just one button.
when playback
1
Press DISPLAY
is stopped.
The Control Menu appears on the TV
screen.
2
3
Press or
repeatedly to
(SETUP), then press
select
.
ENTER
Press or
repeatedly to select
“QUICK,”then press ENTER
.
Preparing to use the THEATRE
SYNC function
Note
e guide message appears at the bottom of
the TV screen when you turn on the system
for the first time or aſter performing “RESET”
(page 72).
Register the TV’s input source connected
to this system.
To select the TV’s input
Press the following buttons while holding
.
down SLEEP
Press
TV’s input source
0
No input source
(Default)
1 to 8
9
CLEAR
VIDEO 1 to VIDEO 8
COMPONENT 1
COMPONENT 2
COMPONENT 3
COMPONENT 4
+
e selected TV’s input source is
memorized into the remote.
Continued
ꢀ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the THEATRE SYNC
function
Keep the remote pointed in the
direction of the TV until the TV is
turned on and the input source
is changed correctly, then press
.
THEATRE SYNC
If this function does not work, change the
transmission time. e transmission time
varies depending on the TV.
To change the transmission time
Press the following buttons while holding
.
down
Press
Transmission time
1
2
3
4
5
6
7
8
0.5 (Default)
1
1.5
2
2.5
3
3.5
4
ꢀꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Depending on the system status, the volume
Disc
level may not appear on the TV screen.
When you turn on the system, the disc is not
pulled into the disc slot
until “No Disc”
Playing a disc
appears in the display. Do not attempt to
push in the disc until “No Disc” appears.
Normal Play
Do not load an 8 cm disc with an adaptor.
Doing so may cause the system to
malfunction.
When you remove a disc, handle the disc by
Depending on the DVD VIDEO or
VIDEO CD, some operations may
be different or restricted. Refer to the
operating instructions supplied with the
disc.
its edge and pull it straight out of the disc slot
. Do not touch the surface.
Other operations
To
Press
Example: When playing a DVD VIDEO
.
Stop playback
Pause playback . Press
again
or
(or DVD
on the unit) to
resume playback.
Select a track1), or
Title number
Elapsed playing time
chapter or
video file
repeatedly during
playback.
Or, press the numeric
1
2
Press FUNCTION +/
buttons
when
repeatedly to select “DVD”(or
the Control Menu is
press DVD
on the unit).
turned off, then press
2)
ENTER
.
Insert a disc in the disc slot
with the label side facing up.
If the playback does not start
Select an
album3)
+/
repeatedly
during playback or
when playback is
paused.
automatically, press
(or DVD
on the unit).
Locate a point or
quickly in fast during playback.
forward or fast Each time you press
reverse (Lock or , the
Search)4)5)
playback speed changes
cyclically.
To return to normal
on the
playback, press
(or DVD
unit).
3
Press VOLUME +/
the volume.
to adjust
Continued
ꢀꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
6)
7)
DVD VIDEO, DVD-R/-RW in VR mode,
and VIDEO CD only.
DVD VIDEO and DVD-R/-RW in VR mode
only.
To
Press
Watch frame by SLOW
or SLOW
frame (Slow-
when playback
motion Play)6) is paused. Each time
Notes
you press SLOW
,
You cannot search for a still picture on a
or SLOW
DVD-R/-RW in VR mode.
the playback speed
You may not be able to use the Instant Replay
or Instant Advance function in Repeat Play
mode or with some scenes.
changes.
To return to normal
on the
playback, press
(or DVD
unit).
Play one
STEP
to go to
Displaying multi-angles and
subtitles
frame at a
time (Freeze
Frame)6)
the next frame when
playback is paused.
7)
Press STEP
to go to the preceding
frame when playback is
paused.
Changing the angles
(DVD VIDEO only)
You can change the viewing angle while
playing a DVD VIDEO on which various
angles (multi-angles) for a scene are
recorded.
To return to normal
on the
playback, press
(or DVD
unit).
Replay the
REPLAY
during
Press ANGLE
repeatedly during
previous scene playback. (Instant
playback. Each time you press
ANGLE , the angle changes.
Replay)7)
Briefly fast
forward the
ADVANCE
during playback.
Note
Depending on the DVD VIDEO, you may not
be able to change the angle, even if multi-angles
are recorded on the DVD VIDEO.
current scene (Instant Advance)7)
Switch to DVD FUNCTION +/
function from repeatedly (or press
another source DVD
on the
Displaying the subtitles
unit) (Automatic
(DVD VIDEO and DVD-R/-RW in VR
mode only)
Source Selection).
Remove the
disc
on the unit.
You can turn the subtitles on or off while
playing a DVD VIDEO or DVD-R/-RW
in VR mode on which subtitles are
recorded. You can also change the
language of the subtitles with DVD
VIDEO, DVD-R/-RW in VR mode on
which multilingual subtitles are recorded.
1)
You cannot select an audio track during
Lock Search operation of MP3 audio tracks.
DVD VIDEO, DVD-R/-RW in VR mode,
VIDEO CD and AUDIO CD only.
MP3 audio tracks and JPEG image files only.
Except for JPEG image files.
Depending on the disc, the actual speed may
2)
3)
4)
5)
Press SUBTITLE
repeatedly
during playback. Each time you press
differ.
SUBTITLE , the subtitle language
changes or turns off.
ꢀꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
When playing a DVD-R/-RW in VR
mode:
e number of audio tracks recorded on
a disc is displayed.
Example:
1: MAIN: the main sound of the audio
track 1.
Depending on the DVD VIDEO, you may
not be able to change the subtitles even if
multilingual subtitles are recorded on the DVD
VIDEO. You also may not be able to turn the
subtitles off.
1: SUB: the sub sound of the audio
track 1.
Other useful functions
1: MAIN+SUB: the main and sub
sound of the audio track 1.
2: MAIN*: the main sound of the audio
track 2.
Changing the sound
When playing a DVD VIDEO recorded
in multiple audio formats, you can select
the audio format you want. If the DVD
VIDEO is recorded with multilingual
tracks, you can also change the language.
2: SUB*: the sub sound of the audio
track 2.
2: MAIN+SUB*: the main and sub
sound of the audio track 2.
ese items do not appear if only one audio
stream is recorded on the disc being played
back.
*
When playing a VIDEO CD, AUDIO
CD or MP3 audio tracks, you can select
the sound from the right or leſt channel
and listen to the sound of the selected
channel through both the right and leſt
speakers. For example, when playing a
track with the vocals on the right channel
and the instruments on the leſt channel,
you can hear the instruments from both
speakers by selecting the leſt channel.
When playing a VIDEO CD, AUDIO CD,
or MPꢁ audio track:
STEREO: the standard stereo sound.
1/L: the sound of the leſt channel
(monaural).
2/R: the sound of the right channel
(monaural).
Press AUDIO
repeatedly during
When playing a Super VCD:
1: STEREO: the stereo sound of the
audio track 1.
1: 1/L: the sound of the leſt channel of
the audio track 1 (monaural).
1: 2/R: the sound of the right channel
of the audio track 1 (monaural).
2: STEREO: the stereo sound of the
audio track 2.
2: 1/L: the sound of the leſt channel of
the audio track 2 (monaural).
2: 2/R: the sound of the right channel
of the audio track 2 (monaural).
playback to select the audio signal you
want.
e default settings are underlined.
When playing a DVD VIDEO:
Depending on the DVD VIDEO, the
option of language and audio format
varies.
When a 4-digit number is displayed, the
digits represent a language code (see
“Language code list” (page 82)). When
the same language is displayed two or
more times, the DVD VIDEO is recorded
in multiple audio formats. Note that the
sound changes automatically depending
on the disc.
Continued
ꢀꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel playback with PBC
functions
Playing VIDEO CDs with PBC functions
(Version 2.0) PBC Playback
repeatedly
or press the numeric buttons
(VIDEO CD only)
1
Press or
You can use the PBC (Playback Control)
menus on your TV screen to enjoy
the disc’s interactive soſtware. e
menu format and structure may differ
depending on each disc.
to select a track when playback is
stopped.
2
Press
(or DVD
on the
.
unit) or ENTER
1
Press
(or DVD
on the
Playback starts from the selected track.
Still images, such as the menu screens,
will not be shown.
unit) to start playing a VIDEO CD with
PBC functions (Version 2.0).
e PBC menu appears on the TV
screen. Depending on the VIDEO CD,
the menu may not appear.
To return to PBC playback, press
twice, then press
(or DVD
on the unit).
to
2
3
Press the numeric buttons
Resuming playback from the point you
select the item number you want.
stopped the disc Resume Play
.
Press ENTER
is system memorizes the point where
you stopped the disc so you can resume
playback from that point. Resume Play
is not canceled when you turn off the
system except for MP3 audio tracks and
JPEG image files.
Depending on the VIDEO CD,
“Press ENTER” may appear as “Press
SELECT” in the operating instructions
supplied with the disc. In this case,
press
unit).
(or DVD
on the
to
1
While playing a disc, press
stop playback.
4
Continue playback according to the
instructions on the menus.
Refer to the operating instructions
supplied with the VIDEO CD, as
the operating procedure may differ
depending on the VIDEO CD.
“Resume” appears in the display.
If “Resume” does not appear, Resume
Play is not available.
2
Press
unit).
(or DVD
on the
To return to the previous menu
e system starts playback from the
point you stopped the disc in step 1.
.
Press
RETURN
Note
Notes
PBC playback is canceled when Shuffle Play,
Program Play or Repeat Play is activated.
You cannot perform Resume Play during
Shuffle Play or Program Play.
is function may not work properly with
some discs.
Resume Play is canceled when
you press
when playback is stopped.
you eject the disc.
you change the function.
you change the settings in the Setup
Menu.
ꢀꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Depending on where you stopped the disc,
the system may not resume playback from
the exact same point.
If “MULTI-DISC RESUME” is set to “ON,”
Resume Play is not canceled for DVD
VIDEO and VIDEO CD when you eject the
disc or change the function.
Using play mode
Creating your own program
Program Play
Tip
To play back from the beginning of the disc,
press
twice, then press
(or DVD
You can make a program of up to 99
steps in the order you want them to be
played back.
on the unit).
Resuming playback of a disc that was
stopped Multi-disc Resume
.
1
Press DISPLAY
(DVD VIDEO and VIDEO CD only)
is system can store the point where
you stopped the playback of the disc
for up to 40 discs and resumes playback
when you insert the same disc again. If
you store a playback resume point for the
41st disc, the playback resume point for
the first disc will be deleted.
e Control Menu appears on the TV
screen.
2
Press or
select
press ENTER
repeatedly to
(PROGRAM), then
.
e options for “PROGRAM” appear
on the TV screen.
To activate this function, set “MULTI-
DISC RESUME” in “CUSTOM SETUP”
to “ON” (page 47).
repeatedly
3
Press or
to select “SET ,”then press
Note
.
ENTER
If “MULTI-DISC RESUME” in “CUSTOM
SETUP” is set to “ON” and you play back a
recorded disc such as DVD-R, the system may
play back other recorded disc from the same
playback resume point.
To start playback from the beginning of the
disc, press
twice and then
(or
DVD
on the unit).
Track number
Continued
ꢀꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press
.
6
7
To program other tracks, repeat
steps 4 to 5.
e cursor moves to the track list “T”
(in this case, “01”).
Press
(or DVD
on
the unit).
Program Play starts.
When the Program Play ends, you
can restart the same program by
pressing
the unit).
(or DVD
on
To cancel Program Play
To change a programmed step:
Press CLEAR
or select “OFF” in
Press or
repeatedly to select
step 3. To play back the same program
the programmed step number you
again, select “ON” in step 3 and press
.
want to change. en, press
.
ENTER
To delete a programmed step:
To turn off the Control Menu
Press or
repeatedly to select
Press DISPLAY
repeatedly until
the programmed step number
you want to change. en, press
the Control Menu disappears from the
TV screen.
.
CLEAR
Notes
To delete all of the programmed
steps in the program list:
When Program Play is activated, the
“REPEAT” setting is automatically changed
to “ON” if the current setting is “DISC” or
“TRACK.”
Press
to select “ALL CLEAR.”
.
en, press ENTER
You cannot perform Program Play with
5
Select the track you want to
program.
VIDEO CDs during PBC playback.
Tip
For example, select track “02.”
e Program Play is canceled and the program
list is cleared when
Press or
repeatedly to select
.
“02” under “T,” then press ENTER
you eject the disc.
you turn off the system.
you change the function.
Selected track
Total time of the programmed tracks
ꢀꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
.
4
Press ENTER
Playing in random order
Shuffle Play
Shuffle Play starts.
To cancel Shuffle Play, press
CLEAR
or select “OFF” in step 3.
You can play back the tracks on the
current disc in random order. Each time
you perform Shuffle Play, the playing
order may differ.
To turn off the Control Menu
Press DISPLAY
repeatedly until
the Control Menu disappears from the
TV screen.
during
1
Press DISPLAY
playback.
Notes
Shuffle Play is canceled when
you eject the disc.
you turn off the system.
you change the function.
you perform Track/Index Search.
You cannot perform Shuffle Play with
VIDEO CDs during PBC playback.
e same song may be played back
repeatedly for MP3 audio tracks.
e Control Menu appears on the TV
screen.
2
Press or
select
press ENTER
repeatedly to
(SHUFFLE), then
.
e options for “SHUFFLE” appear
on the TV screen.
repeatedly to
select the setting you want.
3
Press or
Playing repeatedly
Repeat Play
When playing a VIDEO CD or
AUDIO CD:
TRACK: all tracks on the disc is
played back randomly.
You can play back all the titles, tracks,
files or a single title, chapter, track or file
on a disc repeatedly.
You can select Shuffle Play and Program
Play at the same time.
When Program Play is activated:
ON: all tracks in the program list is
played back randomly.
When playing a DATA CD/DVD:
ON: all MP3 audio tracks in the
selected album on the disc are
played back randomly.
When no album is selected, the first
album is played back randomly.
during
1
Press DISPLAY
playback.
e Control Menu appears on the TV
screen.
Continued
ꢀꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the Control Menu
2
3
Press or
select
press ENTER
repeatedly to
(REPEAT), then
.
Press DISPLAY
repeatedly until
the Control Menu disappears from the
TV screen.
e options for “REPEAT” appear on
the TV screen.
Notes
You can also change the Repeat Play setting
repeatedly.
by pressing REPEAT
Press or
repeatedly to
“REP” lights up in the display when Repeat
Play is set to “DISC,” “ALBUM” or “ON.”
“REP1” lights up in the display when
Repeat Play is set to “ TITLE,” “CHAPTER,”
“TRACK” or “FILE.”
Depending on the DVD VIDEO, you cannot
perform Repeat Play.
You cannot perform Repeat Play with
VIDEO CDs during PBC playback.
When playing a DATA CD/DVD which
contains MP3 audio tracks and JPEG image
files, the audio sound will not match the
image if their playing time are different.
select the setting you want.
e default setting is underlined.
When playing a DVD VIDEO or
DVD-R/DVD-RW in VR mode:
OFF: does not play back repeatedly.
DISC: repeats all the titles on the
disc.
TITLE: repeats the current title.
CHAPTER: repeats the current
chapter.
When playing a VIDEO CD or
AUDIO CD:
OFF: does not play back repeatedly.
DISC: repeats all the tracks on the
disc.
You cannot select “TRACK” when “MODE
(MP3, JPEG)” is set to “IMAGE (JPEG)”
(page 37).
Repeat Play is canceled when
you eject the disc.
you turn off the system.
you change the function.
TRACK: repeats the current track.
When playing a DATA CD or DATA
DVD:
OFF: does not play back repeatedly.
DISC: repeats all the albums on the
disc.
ALBUM: repeats the current
album.
TRACK*: repeats the current track.
*
MP3 audio tracks only.
When Program Play or Shuffle
Play is activated:
OFF: does not play back repeatedly.
ON: repeats the Program Play or
Shuffle Play.
.
4
Press ENTER
Repeat Play starts.
To cancel Repeat Play, press
CLEAR
or select “OFF” in step 3.
ꢁ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting “ ORIGINAL” or “PLAY
LIST” on a DVD-R/-RW in VR
mode
Searching/selecting a
disc
Playing DVD VIDEOs using the
menu
is function is only available for DVD-
Rs/-RWs in VR mode with a playlist
created.
when
playback is stopped.
e Control Menu appears on the TV
1
Press DISPLAY
Some DVD VIDEOs have menus to help
you enjoy the DVD VIDEOs. You can
play back DVD VIDEOs using these
menus on the TV screen.
screen.
Using DVD TOP MENU
2
Press or
select
repeatedly to
A DVD VIDEO contains a lot of sections
of picture or music feature called “title.”
When you play back a DVD VIDEO
which contains several titles, you can
select the title you want using DVD TOP
(ORIGINAL/PLAY
LIST), then press ENTER
e options for “ORIGINAL/PLAY
LIST” appear on the TV screen.
.
.
MENU
repeatedly to
select the setting you want.
PLAY LIST: play back according to
the playlist created on the disc.
ORIGINAL: play back according to
the originally recorded sequence.
3
4
Press or
Using DVD MENU
Some DVD VIDEOs allow you to select
the disc contents using a menu. When
you play back these DVD VIDEOs, you
can select items such as the language for
the subtitles and the language for the
Press ENTER
.
sound using DVD/TUNER MENU
.
or
.
1
Press DVD TOP MENU
DVD/TUNER MENU
e menu appears on the TV screen.
e contents of the menu vary
depending on the disc.
or the
2
3
Press
/
/
/
numeric buttons
to select
the title or item you want to
play back.
.
Press ENTER
Continued
ꢁ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Press or
repeatedly
Using the on-screen display
to search for a title/chapter/
scene/track/index/album/file
or the numeric buttons
select the title, track, album, etc.
or file number.
to
If you make a mistake, press
CLEAR
to cancel the number.
Press ENTER
.
You can search by different information
recorded on a disc, such as title, track,
and album. Each item is assigned a
unique number on the disc, and you can
select the numbered item you want from
the Control Menu. You can also search
for a particular point using the time code
(Time Search) (DVD VIDEO and DVD-
R/-RW in VR mode only).
e system starts playback from the
selected title, track, album, etc.
To turn off the Control Menu
Press DISPLAY
repeatedly until
the Control Menu disappears.
Tip
When the Control Menu display is turned off,
you can search for a chapter (DVD VIDEO and
DVD-R/-RW in VR mode) or track (AUDIO
CD and VIDEO CD) by pressing the numeric
1
Press DISPLAY . (When
playing a DATA CD/DVD
with JPEG image files, press
.
buttons
and ENTER
DISPLAY
twice.)
To search for a particular point using
e Control Menu appears on the TV
screen.
the time code Time Search
(DVD VIDEO and DVD-R/-RW in VR
mode only)
2
Press or
repeatedly to
select the search item.
.
1
2
Press DISPLAY
Example: when you select
(CHAPTER)
“** (**)” is selected (** refers to a
number). e number in parentheses
indicates the total number of titles,
chapters, tracks, indexes, scenes,
albums or files.
Press or
repeatedly to select
(TIME/TEXT).
“T **:**:**” (elapsed playing time of
the current title) is selected.
.
3
4
Press ENTER
“T **:**:**” changes to “T--:--:--.”
Input the time code using the
numeric buttons , then press
.
ENTER
Selected row
For example, to find the scene at 2
hours, 10 minutes, and 20 seconds
aſter the beginning, enter “2:10:20.”
If you make a mistake, press
.
3
Press ENTER
“** (**)” change to “– – (**).”
CLEAR
to cancel the number.
Note
Depending on the disc, you cannot perform
Time Search.
ꢁꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Searching by scene
Picture Navigation
Depending on the disc, you may not be able to
select some items.
Tip
To display the remaining chapters, titles, or
tracks, select a scene at the bottom row and
press . To return to the previous scene,
1
Press PICTURE NAVI
repeatedly to select the VIEWER
format you want to search in.
select a scene at the top row and press
.
CHAPTER VIEWER (DVD
VIDEO)
TITLE VIEWER (DVD VIDEO)
TRACK VIEWER (VIDEO CD or
Super VCD)
2
Press ENTER
.
e first scene of the first 9 chapters,
titles or tracks appears. If there are
more than 9 chapters, titles, or tracks,
“” appears at the bottom right of
the screen.
to select a
chapter, title or track, then press
3
Press ///
.
ENTER
e system starts playing from the
selected scene.
To cancel searching
Press
RETURN
or DISPLAY
.
ꢁꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
e following discs/situations can increase
the time it takes to start playback:
a disc recorded with a complicated tree
structure.
Playing MP3/JPEG discs
a disc recorded in Multi Session.
a disc to which data can be added (non-
Notes
finalized disc).
Depending on the soſtware you use to create
the DATA CD or DATA DVD, the playback
order may differ.
e system can play back up to 200 albums,
including albums that do not contain MP3
audio tracks and JPEG image files. e
system will not play back any albums beyond
the 200th album.
e maximum number of MP3 audio tracks
or JPEG image files on an album which this
system can recognize is:
600 when “MODE (MP3, JPEG)” is set to
“AUDIO (MP3)” or “IMAGE (JPEG).”
when the tracks or files in another album
have just been played back.
Some CD-Rs/-RWs or DVD-Rs/-RWs/+Rs/
+RWs cannot be played back on the system
depending on the file format.
When playing a DATA CD or DATA DVD
containing both MP3 audio tracks and JPEG
image files, select “MODE (MP3, JPEG)”
from the Control Menu aſter the disc’s TOC
reading is complete. If you want to play back
both MP3 audio tracks and JPEG image
files, set “MODE (MP3, JPEG)” to
“AUTO.”
MP3 audio tracks only, set “MODE (MP3,
JPEG)” to “AUDIO (MP3).”
300 when “MODE (MP3, JPEG)” is set to
“AUTO.”
e system can play back MP3 audio tracks
and JPEG image files. e system will play
back any data with the extension “.MP3”,
“.JPG” or “.JPEG” even if they are not in
MP3 or JPEG format. Playing this data may
generate a loud noise which could damage
your speaker system.
JPEG image files only, set “MODE (MP3,
JPEG)” to “IMAGE (JPEG).”
e system can play back to a depth of 8
folders only.
Depending on the encoding/writing soſtware,
recording device, or the recording media
used to record an MP3 audio track, you may
encounter problems such as cannot play
back, sound interruptions and noise.
ꢁꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press or
repeatedly to
Selecting an MP3 audio track
or album
select the MP3 audio track you
want, then press ENTER
.
e system starts playing the
selected MP3 audio track.
1
2
Insert a disc in the disc slot
.
.
To stop playback, press
e system starts playing the first
album.
To display the next or previous page of
track list or album list
.
Press DVD/TUNER MENU
Press or
repeatedly when the
e album list appears on the TV
screen.
track list or album list is displayed.
To play back the next album of MP3
audio tracks
You can select the next album by pressing
repeatedly until the last track of
the current album, then press
once. e first track of the next album
is selected. However, you cannot select
the previous album by pressing
repeatedly. To select the previous album,
select the album from the album list.
repeatedly to
select an album.
3
Press or
To return to the album list when the
track list is displayed
Playing an album:
Press
(or DVD
on the
.
Press
RETURN
unit).
e system starts playback from the
first track of the selected album.
To turn on or off the album list or track
list
.
To stop playback, press
Press DVD/TUNER MENU
repeatedly.
Playing a track:
.
1
Press ENTER
e list of MP3 audio tracks of the
selected album appears.
Selecting a JPEG image file or
album
.
1
Insert a disc in the disc slot
e system starts playing the first
album.
.
2
Press DVD/TUNER MENU
e album list appears on the TV
screen.
Continued
ꢁꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To display the next or previous page of
album list
3
Press or
repeatedly to
select an album.
Press or
repeatedly when the
album list is displayed.
Playing an album:
Press
(or DVD
on the
unit).
To display the next or previous JPEG
image file
e system starts a slide show from
the first image file of the selected
album.
Press or
repeatedly during the
slide show.
.
To stop playback, press
To play back the next album of JPEG
image files
Playing an image file:
1
Press PICTURE NAVI
.
You can select the next album by pressing
umbnail picture for the first 16
JPEG image files in the selected
album is displayed.
repeatedly until the last file of the
current album, then press
once.
e first file of the next album is selected.
However, you cannot select the previous
album by pressing
repeatedly. To
select the previous album, select the
album from the album list.
To turn on or off the display of album
list
Press DVD/TUNER MENU
repeatedly.
If there are more than 16 image
files in the selected album, the
scroll bar appears at the right.
To rotate a JPEG image file
When a JPEG image file is displayed on
the TV screen, you can rotate the image
by 90 degrees.
to select the
2
Press
/
/
/
image you want to view, then
Press or
repeatedly while viewing
press
the unit).
(or DVD
on
an image.
Press CLEAR
view.
to return to the original
e slide show starts from the
selected image file.
To stop playback, press
.
Notes
e PICTURE NAVI
button does not
work when “MODE (MP3, JPEG)” is set to
“AUDIO (MP3).”
When you press or
to select the next
or previous image, the image will return to
its original view even if you have rotated the
image previously.
e slide show stops when you press or
.
ꢁꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Press or
repeatedly to
Playing MP3 audio tracks and
JPEG image files as a slide
show with sound
select the album you want, then
press
(or DVD
on
the unit).
e slide show with sound starts from
the selected album.
You can play back a slide show with
sound by first placing both JPEG image
files and MP3 audio tracks in the same
album on a DATA CD/DVD.
To stop playback, press
.
To turn on or off the display of album
list
Press DVD/TUNER MENU
repeatedly.
.
1
Insert a disc in the disc slot
e system starts playing the first
album.
To cancel slide show with sound
Select “AUDIO (MP3)” or “IMAGE
(JPEG)” in step 4.
2
3
Press to stop playback.
.
Press DISPLAY
e Control Menu appears on the TV
Notes
In some cases, you cannot change the
“MODE (MP3, JPEG)” setting when “MODE
(MP3, JPEG)” has been set to
“IMAGE (JPEG)” and the selected disc
only contains MP3 audio tracks.
“AUDIO (MP3)” and the selected disc
only contains JPEG image files.
If there are no MP3 audio tracks in the disc,
“No audio data” appears on the TV screen
and the disc cannot be played back.
screen.
4
Press or
select
repeatedly to
(MODE (MP3,
JPEG)), then press ENTER
.
e options for “MODE (MP3,
JPEG)” appear on the TV screen.
e default setting is underlined.
If there are no JPEG image files in the disc,
“No image data” appears on the TV screen
and the disc cannot be played back.
If you play back a large data size of MP3
audio tracks and JPEG image files at the same
time, the sound may skip.
AUTO: Plays back both JPEG
image files and MP3 audio tracks
in the same album as a slide show
with sound.
AUDIO (MP3): Plays back MP3
audio tracks continuously.
IMAGE (JPEG): Plays back JPEG
image files as a slide show.
repeatedly
to select “AUTO,”then press
5
6
Press or
.
ENTER
Press DVD/TUNER MENU
.
e album list appear on the TV
screen.
Continued
ꢁꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press or
repeatedly to select
Specifying the slide show speed
(EFFECT), then press
(JPEG image files only)
.
ENTER
repeatedly until
the Control Menu for JPEG image
files appears on the TV screen.
1
Press DISPLAY
e options for “EFFECT” appear on
the TV screen.
Press or
repeatedly to select
2
Press or
repeatedly to select
the setting you want.
e default setting is underlined.
MODE 1: e image sweeps in
from top to bottom of the screen.
MODE 2: e image sweeps in
from leſt to right of the screen.
MODE 3: e image stretches out
from the center of the screen.
MODE 4: e images randomly
cycle through the effects.
MODE 5: e next image slides
over the current image.
(INTERVAL), then press
.
ENTER
e options for “INTERVAL” appear
on the TV screen.
repeatedly to select
the transition interval you want.
3
Press or
e default setting is underlined.
NORMAL: Sets the duration to
about 6 to 9 seconds (Images that
are 4,000,000 pixels or more will
lengthen the duration).
FAST: Sets the duration shorter
than NORMAL.
OFF: Turns off this function.
.
4
Press ENTER
SLOW 1: Sets the duration longer
than NORMAL.
e selected setting takes effect.
SLOW 2: Sets the duration longer
than SLOW 1.
.
4
Press ENTER
e selected setting takes effect.
Note
Some JPEG image files (especially progressive
JPEG image files or JPEG image files with
3,000,000 pixels or more) may take a longer
time to display than others, which may make
the transitions seem longer than that of the
option you selected.
Selecting a transition effect for image
files in the slide show
(JPEG image files only)
repeatedly until
the Control Menu for JPEG image
files appears on the TV screen.
1
Press DISPLAY
ꢁꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the delay
between the picture
Restricting playback of
the disc
CUSTOM PARENTAL CONTROL,
PARENTAL CONTROL
and sound
A/V SYNC
You can set 2 kinds of playback
restrictions for the disc you want.
When the sound does not synchronize
with the pictures on the screen, you can
adjust the delay between the picture and
sound.
Custom Parental Control
You can set playback restrictions so
that the system will not play back
inappropriate discs.
A/V SYNC does not work for MP3 audio
tracks and JPEG image files in DATA
CD/DVD.
Parental Control
when
playback is stopped.
You can limit the playback of some DVD
VIDEOs according to a predetermined
level such as the age of the users. When
a limited scene is played back, that scene
may be skipped or replaced with different
scenes.
1
Press DISPLAY
e Control Menu appears on the TV
screen.
2
Press or
select
press ENTER
repeatedly to
(A/V SYNC), then
e same password is used for both
Custom Parental Control and Parental
Control.
.
e options for “A/V SYNC” appear
on the TV screen.
repeatedly to
3
4
Press or
Preventing playback of specific
discs
CUSTOM PARENTAL CONTROL
select the setting you want.
e default setting is underlined.
OFF: Does not adjust.
ON: Adjusts the difference between
picture and sound.
You can set the same Custom Parental
Control password for up to 40 discs.
When you set the 41st-disc, the playback
restriction for the first disc is canceled.
.
Press ENTER
Note
Depending on the input stream, this function
may not be effective.
1
Insert the disc you want to set
the playback restriction.
If the disc is playing, press
to
stop playback.
2
Press DISPLAY
when
playback is stopped.
e Control Menu appears on the TV
screen.
ꢁꢇGB
Continued
Download from Www.Somanuals.com. All Manuals Search And Download.
If you make a mistake when entering
your password
3
4
Press or
to select
repeatedly
(PARENTAL
Press
repeatedly to delete the
.
CONTROL), then press ENTER
e options for “PARENTAL
CONTROL” appear on the TV screen.
number you have entered, then re-enter
your password again.
To turn off the Custom Parental
Control function
Press or
repeatedly
to select “ON ,”then press
.
ENTER
1
Follow steps 1 through 3 of
“Preventing playback of specific
discs”(page 39).
If you have not entered a
password:
e display for registering a new
password appears.
2
3
Press or repeatedly to select “OFF
,”then press ENTER
.
Enter your 4-digit password using
the numeric buttons , then press
.
ENTER
To play back a disc for which Custom
Parental Control is set
1
Insert the disc for which Custom
Parental Control is set.
e “CUSTOM PARENTAL
CONTROL” display appears.
Enter a 4-digit password using the
numeric buttons , then press
ENTER
.
e display for confirming the
password appears on the TV screen.
When you have already registered
a password:
e display for entering the password
appears on the TV screen.
5
Enter or re-enter your 4-digit
password using the numeric
2
Enter your 4-digit password using
buttons , then press
the numeric buttons , then press
.
ENTER
.
ENTER
“Custom parental control is set.”
appears on the TV screen and the
screen returns to the Control Menu.
e system is ready for playback.
Tip
If you forget your password, enter the 6-
digit number “199703” using the numeric
buttons
when the “CUSTOM PARENTAL
CONTROL” display asks you for your
password, then press ENTER . e display
will ask you to enter a new 4-digit password.
ꢂ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Enter or re-enter your 4-digit
password using the numeric
Limiting playback for children
PARENTAL CONTROL
buttons , then press
.
(DVD VIDEO only)
ENTER
You can limit the playback of some DVD
VIDEOs according to a predetermined
level such as the age of the users.
e display for setting the playback
limitation level appears.
when
playback is stopped.
1
Press DISPLAY
e Control Menu appears on the TV
screen.
2
Press or
to select
repeatedly
(PARENTAL
CONTROL), then press ENTER
e options for “PARENTAL
.
repeatedly to
select “STANDARD,”then press
5
6
Press or
CONTROL” appear on the TV screen.
.
ENTER
e options for “STANDARD” appear
on the TV screen.
repeatedly to
3
Press or
select “PLAYER ,”then press
.
ENTER
Press or
repeatedly to
select a geographic area as the
playback limitation level, then
If you have not entered a
password:
e display for registering a new
password appears.
.
press ENTER
e area is selected.
When you select “OTHERS ,” enter
the area code for the geographic area
you want according to the “Parental
Control area code list” (page 83) by
.
using the numeric buttons
repeatedly
to select “LEVEL,”then press
7
Press or
.
ENTER
Enter a 4-digit password using the
e options for “LEVEL” appear on
the TV screen.
numeric buttons , then press
ENTER
.
e display for confirming the
password appears on the TV screen.
When you have already registered
a password:
e display for entering the password
appears on the TV screen.
Continued
ꢂ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
8
Press or
repeatedly to
If you forget your password, remove the disc
and repeat steps 1 to 3 of “Limiting playback
for children.” When you are asked to enter your
password, enter “199703” using the numeric
select the level you want, then
press ENTER
.
Parental Control setting is completed.
e lower the value, the stricter the
limitation.
To turn off the Parental Control
function, set “LEVEL” to “OFF.”
buttons , then press ENTER . e display
will ask you to enter a new 4-digit password.
Aſter you enter a new 4-digit password, reinsert
the disc and press . When the display
for entering your password appears, enter your
new password.
If you make a mistake when entering
your password
Press
repeatedly to delete the
Changing the password
number you have entered, then re-enter
your password again.
when
playback is stopped.
1
Press DISPLAY
To play back a disc for which Parental
Control is set
e Control Menu appears on the TV
screen.
(or
1
Insert the disc and press
DVD
e display for entering your password
appears on the TV screen.
on the unit).
2
Press or
to select
repeatedly
(PARENTAL
.
CONTROL), then press ENTER
e options for “PARENTAL
2
Enter your 4-digit password using
CONTROL” appear on the TV screen.
the numeric buttons , then press
.
ENTER
repeatedly to
3
4
Press or
e system starts playback.
select “PASSWORD ,”then
Notes
.
press ENTER
e Control Menu display will show different
e display for entering the password
appears on the TV screen.
items depending on the disc type.
When you play back DVD VIDEOs which
do not have the Parental Control function,
playback cannot be limited on this system.
Depending on the DVD VIDEO, you may
be asked to change the parental control level
while playing the disc. In this case, enter your
password, then change the level. If Resume
Play is canceled, the level returns to the
original level.
Enter your 4-digit password
,
using the numeric buttons
.
then press ENTER
ꢂꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Enter a new 4-digit password
Using the DVD setup
menu
By using the DVD setup menu, you can
make various adjustments to items such
as picture and sound.
,
using the numeric buttons
.
then press ENTER
To confirm your password,
re-enter it using the numeric
buttons , then press
.
ENTER
Note
Playback settings stored in the disc take
priority over the DVD setup menu settings.
erefore, some of the DVD setup menu
settings may not be performed.
If you make a mistake when entering
your password
Press
repeatedly to delete the
number you have entered, then re-enter
when
playback is stopped.
1
Press DISPLAY
your password again.
e Control Menu appears on the TV
screen.
2
Press or
select
press ENTER
repeatedly to
(SETUP), then
.
e options for “SETUP” appear on
the TV screen.
repeatedly to
select “CUSTOM,”then press
3
Press or
.
ENTER
e Setup menu appears on the TV
screen.
Continued
ꢂꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press or
repeatedly
6
Press or
repeatedly to
to select the setup item from
the displayed list: “LANGUAGE
SETUP,”“SCREEN SETUP”or
“CUSTOM SETUP.” Then press
select the setting you want,
then press ENTER
e setting is selected and setup is
.
completed.
.
ENTER
e setup item is selected.
Example: SCREEN SETUP
Selected item
Selected setting
DVD setup menu item list
Setup items
e default settings are underlined.
repeatedly to
5
Press or
select the item you want, then
Setting the language LANGUAGE
.
press ENTER
SETUP
e options for the selected item
appear on the TV screen.
Example: TV TYPE
Set various languages for the on-screen
display or sound track.
Options
OSD
(On-Screen Display) Switches the
language of the on-screen display.
MENU*
(DVD VIDEO only)Select the language
for the DVD menu.
AUDIO*
(DVD VIDEO only) Switches the
language of the sound track.
When you select “ORIGINAL,” the
language given priority in the disc is
selected.
ꢂꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBTITLE*
SCREEN SAVER
(DVD VIDEO only)Switches the
e screen saver will help prevent your
language of the subtitle .
display device from becoming damaged
(ghosting). Press
When you select “AUDIO FOLLOW,”
the language for the subtitles changes
according to the language you selected
for the sound track.
(or DVD
on the unit) to turn off the screen saver.
ON: e screen saver image appears
when playback is stopped or paused for
15 minutes or when you play back an
AUDIO CD or MP3 audio tracks for
more than 15 minutes.
* When you select a language in “MENU,”
“SUBTITLE,” or “AUDIO” that is not
recorded on the DVD VIDEO, one of the
recorded language is automatically selected.
However, depending on the disc, the
OFF: e screen saver does not appear.
BACKGROUND
language may not be selected automatically.
Selects the background color or picture
to be displayed on the TV screen. e
background color or picture is displayed
when playback is stopped or while
playing an AUDIO CD and MP3 audio
tracks.
If you select “OTHERS ” in “MENU,”
“SUBTITLE,” and “AUDIO,” enter a language
code from the “Language code list” (page 82)
.
using the numeric buttons
Setting the TV screen SCREEN SETUP
JACKET PICTURE: e jacket picture
(still picture) appears in the background,
but only when the jacket picture is
already recorded on the disc (DVD
VIDEO, CD-EXTRA, etc.). If the disc
does not contain a jacket picture, the
“GRAPHICS” picture appears.
Choose the settings according to the TV
you connected.
GRAPHICS: A preset picture stored in
the system appears in the background.
BLUE: e background color is blue.
BLACK: e background color is black.
TV TYPE1)
BLACK LEVEL
(DVD VIDEO only)
Select the black level (setup level) for the
video signals output from the video jacks
other than COMPONENT VIDEO OUT
jacks.
16:9: Select this when you connect a
wide-screen TV or a TV with a wide
mode function.
4:3 LETTER BOX: Select this when you
connect a 4:3 screen TV. is setting
displays a wide picture with bands on the
upper and lower portions of the screen.
4:3 PAN SCAN2): Select this when you
connect a 4:3 screen TV. is setting
displays the wide picture on the entire
screen and cuts off the portions that do
not fit.
ON: Standard level
OFF: Lower the standard black level. Use
this when the picture becomes too white.
Continued
ꢂꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
BLACK LEVEL (COMPONENT OUT)
Select the black level (setup level)
for the video signals output from the
COMPONENT VIDEO OUT jacks.
You cannot select “BLACK LEVEL
(COMPONENT OUT)” when the system
outputs progressive signal.
16:9
OFF: Standard level
ON: Raise the standard black level. Use
this when the picture becomes too black.
ꢂ:ꢁ OUTPUTꢁ)
4:3 LETTER BOX
4:3 PAN SCAN
Change this setting to watch 4:3
aspect ratio progressive signals. If
you can change the aspect ratio on
your progressive format (525p/625p)
compatible TV, change the setting on
your TV.
FULL: Select this when you can change
the aspect ratio on your TV.
NORMAL: Select this when you cannot
change the aspect ratio on your TV.
Shows a 16:9 aspect ratio signal with
black bands on leſt and right sides of the
image.
2)
3)
Depending on the DVD VIDEO, “4:3
LETTER BOX” may be selected automatically
instead of “4:3 PAN SCAN” or vice versa.
is setting is effective only when
you set “TV TYPE” in “SCREEN SETUP”
to “16:9.”
“P AUTO” or “P VIDEO” is selected
(page 18).
Setting playback options CUSTOM
SETUP
Set up playback related and other
settings.
16:9 aspect ratio TV
1)
e default setting varies depending on the
country or region.
PAUSE MODE
(DVD VIDEO and DVD-R/-RW in VR
mode only)
AUTO: e picture, including subjects
that move dynamically, is output with no
jitter. Normally select this position.
FRAME: e picture, including subjects
that do not move dynamically, is output
in high resolution.
ꢂꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
TRACK SELECTION
(DVD VIDEO only) Gives priority to the
sound track which contains the highest
number of channels when you play back
a DVD VIDEO on which multiple audio
(PCM, DTS, MPEG audio, or Dolby
Digital) formats1) are recorded.
OFF: No priority given.
AUTO2): Priority given.
MULTI-DISC RESUME
(DVD VIDEO and VIDEO CD only)
ON: Stores the resume playback point in
the memory for up to 40 discs.
OFF: Does not store the resume playback
point in the memory. Playback starts at
the resume playback point only for the
current disc in the system.
AUDIO DRCꢁ) (Dynamic Range
Compression)
(DVD VIDEO and DVD-R/-RW in VR
mode only)
OFF: No compression of dynamic range.
STANDARD: Reproduces the sound
track with the kind of dynamic range that
the recording engineer intended. Useful
for watching movies at low volume late
at night.
MAX: Narrows the dynamic range fully.
1) If each audio sound track has the same
number of channels, the system selects the
audio sound tracks in the order from PCM,
DTS, Dolby Digital, to MPEG.
2) When you set “TRACK SELECTION” to
“AUTO,” the language may change. e
“TRACK SELECTION” setting has higher
priority than the “AUDIO” settings in
“LANGUAGE SETUP”. However, depending
on the disc, this function may not be
performed.
3) AUDIO DRC can only be performed with
Dolby Digital sources.
ꢂꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the AM tuning interval
e factory setting for AM tuning
interval is 9 kHz (or 10 kHz for same
areas).
Tuner
Use buttons on the unit.
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually
tuning in the station.
on the unit
repeatedly to select “AM”.
1
Press TUNER/BAND
to turn off the system.
2
3
4
Press /
Press DISPLAY
to display the clock.
While the clock is displayed, hold
Listening to FM or AM
down TUNER/BAND
and then
press /
to turn on the system.
1
Press FUNCTION +/
“AM 9k Step” or “AM 10k Step”
appears in the display.
When you change the interval, all the
AM preset stations are erased.
repeatedly to select “TUNER FM”
or “TUNER AM”(or press TUNER/
BAND
on the unit repeatedly
to select “FM”or “AM”).
Tips
To improve broadcast reception, adjust the
supplied antennas, or connect an external
antenna.
2
Press and hold TUNING +/
until the frequency indication
changes and then release.
Scanning stops automatically when
a station is tuned in and “TUNED”
lights up in the display. When a FM
stereo program is tuned in, “ST”
lights up in the display.
When an FM stereo program has static
noise, press FM MODE
repeatedly until
“MONO” lights up in the display. ere will
be no stereo effect, but the reception will
improve.
Listening to satellite radio
You can operate and listen to XM or
SIRIUS satellite radio by connecting an
optional antenna or tuner. Before using
the system, connect the XM Mini-Tuner
and Home Dock or the SiriusConnect
Home tuner to the system. See “Hooking
up the system” (page 14) for details about
connection.
If “TUNED” does not appear and
the scanning does not stop, press
TUNING +/
repeatedly to tune
in the station you want.
3
Adjust the volume.
Press VOLUME +/
.
1
Select “XM”or “SIRIUS.”
To stop automatic scanning
Press XM or SIRIUS
(or TUNER/
.
Press
BAND
repeatedly).
ꢂꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select the All Channel mode.
Press CATEGORY MODE
repeatedly until “CAT” disappear.
Listening to preset radio
station
1
Tune in the desired station
(see “Listening to FM or AM”
or “Listening to satellite radio”
(page 48)).
3
4
Tune in the desired channel.
Press TUNING +/
repeatedly.
Adjust the volume.
Press VOLUME +/
.
.
2
3
Press DVD/TUNER MENU
To select a channel by Category mode
“Memory?” flashes in the display.
1
Press XM or SIRIUS
BAND
(or TUNER/
.
Press ENTER
repeatedly).
A preset number flashes in the
2
Press CATEGORY MODE
display.
e stations are stored from preset
number 1.
repeatedly until “CAT”appears.
repeatedly.
3
4
Press CATEGORY +/
Press TUNING +/
repeatedly.
To select a channel using the numeric
buttons
Preset number
Enter the 3 digits of the desired channel
repeatedly
to select the preset number you
want.
4
Press PRESET +/
using the numeric buttons , then press
.
ENTER
To check your XM Radio ID or SIRIUS ID
number
.
5
6
Press ENTER
Press the numeric button 0 , then press
“Complete!” appears in the display.
ENTER
to select the channel 0.
e station is stored.
To check XM or SIRIUS radio
information
Repeat steps 1 to 6 to store
other stations.
Press DISPLAY
repeatedly when the
You can preset up to 20 FM, 10 AM,
20 XM and 20 SIRIUS stations.
e preset stations are retained for
half a day even if you unplug the
power cord or if a power failure
occurs.
system is on. You can view XM or SIRIUS
radio information, such as the channel
name, song title and artist name.
Notes
If you select a channel using the numeric
buttons
in Category mode, the tuning
mode changes to automatically All Channel
mode.
You cannot select a SIRIUS channel using
TUNING +/
if the Parental Lock is set
for the channel.
Continued
ꢂꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
7
To listen to a preset station,
4
5
Press or
repeatedly until
press PRESET +/
repeatedly
“Lock?”appears, then press
.
to select the preset station you
want.
ENTER
“Enter Code” appears.
You can also press the numeric
Enter your 4-digit password
using the numeric buttons
“Complete!” appears and the Parental
buttons , then press ENTER
.
to select a preset station (FM/AM
station only).
Lock is set.
To cancel presetting
.
Press DVD/TUNER MENU
To delete the numbers you have
entered
Notes on presetting XM or SIRIUS
stations
You cannot preset XM or SIRIUS stations
except when you receive the station.
You cannot operate CATEGORY +/
preset tuning mode.
Press CLEAR
repeatedly.
To change the password
in
1
Press SIRIUS
“SIRIUS.”
(or TUNER/BAND
on the unit repeatedly) to select
If you select a channel using the numeric
buttons
in preset tuning mode, the tuning
mode changes automatically to All Channel
mode.
.
2
3
Press DVD/TUNER MENU
Press or
repeatedly until “Edit
Code?”appears, then press ENTER
.
“Old Code” appears.
Restricting access to specific
channels (SIRIUS only)
4
Enter your current 4-digit password
using the numeric buttons
.
Parental Lock
“New Code” appears.
You can restrict access to certain
channels using your own password. e
password is set to “0000” as the default.
Change the password before you use
this function for the first time (see “To
change the password”).
5
6
Enter a new 4-digit password using
.
the numeric buttons
To confirm your new password, re-
enter it using the numeric buttons
.
1
Select “SIRIUS.”
“Complete!” appears and the new
password is set.
Press SIRIUS
(or TUNER/BAND
on the unit repeatedly).
2
Tune in the desired channel
(see “Listening to satellite radio”
(page 48).
.
3
Press DVD/TUNER MENU
ꢃ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To listen to the locked channels
1
Press SIRIUS
(or TUNER/BAND
on the unit repeatedly) to select
“SIRIUS.”
2
Select a locked channel you want to
listen to using the numeric buttons
.
“Enter Code” appears.
3
Enter your 4-digit password using
the numeric buttons
e channel is tuned in.
.
To remove the Parental Lock
1
When the locked channel is tuned
in, press DVD/TUNER MENU , and
then press or
repeatedly until
“Unlock?”appears.
2
Press ENTER
.
“Complete!” appears and the channel
is unlocked.
Notes
When you select a channel using
TUNING +/
in All Channel mode or
Category mode, locked channels are skipped.
e display will return to the original
indication if you press
or if no entry is
made for a set period of time aſter you have
been prompted to enter the password.
When the system is reset to the factory
settings, the Parental Lock password returns
to the default (“0000”), but Parental Lock
settings are not removed.
You cannot preset locked channels.
If you set the Parental Lock for a preset
channel, the preset information for that
channel returns to the default.
You cannot set the Parental Lock for channels
0 or 184.
ꢃ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to music of a
Bluetooth mobile phone or
Bluetooth device
You can listen to music from your
Bluetooth mobile phone or Bluetooth
device over a wireless connection.
Bluetooth Device
Using the Bluetooth
function
is system supports Bluetooth A2DP
and AVRCP profiles. For details on
Bluetooth wireless technology, see
“Bluetooth wireless technology” (page
84).
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Follow the procedure below to listen to
music from Bluetooth devices with this
system.
Pairing this system with a Bluetooth
device
Connecting to registered devices
Playing music of a Bluetooth device
For details about the operations of
the Bluetooth device, also refer to the
operation manual supplied with your
Bluetooth device.
ꢃꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing this system with a Bluetooth
device
4
Enter the passcode.
Passcode entry may be required
depending on the type of Bluetooth
device.
When “PIN?” and a countdown
appear, enter the passcode at the
system as follows:
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
device. Once a pairing operation is
performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music of
a Bluetooth device” (page 54).
1
Place the Bluetooth device to be
connected to this system within
1 meter of the system.
Press the numeric buttons
(or
+/
and / ) to
enter the same passcode that was
entered at the Bluetooth device,
and then press ENTER
(or
on the unit).
2
Select the Bluetooth function.
BLUETOOTH OPR
Press FUNCTION +/
repeatedly
Once pairing is completed and the
connection is established, the system
display changes as follows:
“Connect” Name of the Bluetooth
device
to select “BLUETOOTH” (or press
BLUETOOTH
on the unit).
3
Operate the Bluetooth device
and perform the pairing
operation.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
To cancel passcode entry partway
.
Press
Notes
“Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
When searching for this system
with the Bluetooth device, a list of
the devices found may appear in the
Bluetooth device display depending
on the type of Bluetooth device.
is system appears as
is system only supports numerical
passcodes up to 4 digits.
e pairing standby status of the system is
cancelled aſter about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
“CMT-DH7BT.”
When establishing a connection with
this system, select the audio profile
(A2DP, AVRCP) at the Bluetooth
device. If the Bluetooth device does
not support the AVRCP profile, you
cannot perform playback or other
operations with the system (page 54).
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Continued
ꢃꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To erase all the pairing registration
information
Playing music of a Bluetooth device
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP. If the system is not
connected with a Bluetooth device using
AVRCP, “Not In Use” appears when you
operate the system.
repeatedly
to select “BLUETOOTH”(or press
1
Press FUNCTION +/
BLUETOOTH
on the unit).
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
1
Select the Bluetooth function.
Press FUNCTION +/
repeatedly
and hold BLUETOOTH OPR
on
to select “BLUETOOTH” (or press
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
BLUETOOTH
on the unit).
2
Establish a connection from the
Bluetooth device.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
.
2
3
Press CLEAR
“Delete?” appears.
.
Press ENTER
“Complete!” appears and all the
pairing information is erased.
Once the connection is established,
the system display changes as follows:
“Connect” Name of the Bluetooth
device
Note
In order to connect with a Bluetooth device
aſter performing this operation, you must enter
the passcode again.
3
4
Start playback.
Press
(or BLUETOOTH
on the unit).
Depending on the Bluetooth device,
you may need to start up the AV
soſtware of the Bluetooth device
beforehand.
Adjust the volume.
Press VOLUME +/
.
To check the address of a connected
Bluetooth device
Press DISPLAY
while the Bluetooth
device name appears in the system
display.
e Bluetooth device address appears for
8 seconds.
ꢃꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the connection with a
Bluetooth device
Listening to music on this
system using Bluetooth
headphones
Press and hold BLUETOOTH OPR
on the unit for about 2 seconds until
“Disconnect” appears, or until the
information on the display (device name,
etc.) disappears.
You can listen to music played on this
system using your Bluetooth headphones
over a wireless connection.
Other operation
To
Press
Pause playback
.
.
Stop playback
Select a file
/
.
Find a point in Hold down /
.
a file
Note
ese operations may not be available for
certain Bluetooth devices. In addition, the
actual operations may differ depending on the
connected Bluetooth device.
Follow the procedure below to listen
to music on this system with Bluetooth
headphones.
Notes on connections with Bluetooth
devices
If you cannot connect with a paired
Bluetooth device, perform the pairing
operation between the system and the
Bluetooth device again.
Pairing this system with Bluetooth
headphones
Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
Connecting to registered headphones
Playing music on this system
When BLUETOOTH
on the unit
For details about the operations of the
Bluetooth headphones, also refer to the
operation manual supplied with your
Bluetooth headphones.
is pressed while connected to Bluetooth
headphones, it may take some time until
a connection is made to the system from
another Bluetooth device.
Continued
ꢃꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing this system with Bluetooth
headphones
To cancel passcode entry partway
.
Press
Pairing is an operation where Bluetooth
devices register with each other
Notes
“Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
is system only supports numerical
passcodes up to 4 digits.
e pairing standby status of the system is
cancelled aſter about 30 seconds. If pairing
is not successful, redo the procedure from
step 1.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
beforehand. Use the procedure below
to pair the system with your Bluetooth
headphones. Once a pairing operation
is performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music on
this system” (page 57).
1
Select a function other than the
Bluetooth function.
Press FUNCTION +/
repeatedly.
Pairing may not be possible if other
Bluetooth devices are present around the
system. In this case, turn off the other
Bluetooth devices.
2
Place the Bluetooth
headphones to be connected
to this system within 1 meter of
the system.
To erase all the pairing registration
information
3
4
Put the Bluetooth headphones
in pairing mode.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
repeatedly
to select “BLUETOOTH”(or press
1
Press FUNCTION +/
BLUETOOTH
on the unit).
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
Press and hold BLUETOOTH
OPR
on the unit for about 7
and hold BLUETOOTH OPR
on
the unit for about 2 seconds to put the
seconds until the BLUETOOTH
system in Bluetooth standby mode.
indicator
flashes.
Sound output from the speakers is
.
2
3
Press CLEAR
stopped.
“Delete?” appears.
.
Press ENTER
5
Enter the passcode.
“Complete!” appears and all the
pairing information is erased.
Follow the same procedure as in
step 4 of “Pairing this system with a
Bluetooth device” (page 53).
Once pairing is completed and the
connection is established, the system
display changes as follows:
“Connect” Name of the Bluetooth
device
Note
To connect with Bluetooth headphones aſter
performing this operation, you must enter the
passcode again.
ꢃꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing music on this system
To cancel the connection with
Bluetooth headphones
You can operate this system from
Bluetooth headphones by connecting the
system and Bluetooth headphones using
AVRCP.
Press and hold BLUETOOTH OPR
on the unit for about 2 seconds until the
BLUETOOTH indicator
turns off.
Notes
1
Select a function other than the
Bluetooth function.
If you cannot connect with paired Bluetooth
headphones, perform the pairing operation
between the system and the Bluetooth
headphones again.
Press FUNCTION +/
repeatedly.
2
Establish a connection with the
Bluetooth headphones.
When the system is changed to a function
other than the Bluetooth function and
BLUETOOTH OPR
on the unit is pressed
Press and hold BLUETOOTH OPR
while connected to a Bluetooth device, it may
take some time until a connection is made
with the Bluetooth headphones.
on the unit for about 2 seconds
until the BLUETOOTH indicator
lights up, then release the button.
If more than one Bluetooth device
is system stores separate volume settings
for when listening through the speakers
that has been connected in the past
is present around the system, the
system attempts to connect with up
to 3 most recently connected devices.
(Connection is attempted with up
to 3 devices in order from the most
recently connected device, and the
attempts end when a connection is
established.)
or PHONES jack
on the unit, or when
listening through Bluetooth headphones.
Once the connection is established,
the system display changes as follows:
“Connect” Name of the Bluetooth
device
3
4
Start playback of the music for
the function selected in step 1.
Depending on the type of Bluetooth
headphones, you can operate this
system (playback, volume control,
etc.) using the headphone’s controls.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
Adjust the volume.
Press VOLUME +/
.
ꢃꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustment
Adjusting the sound
Generating a more dynamic
sound (Dynamic Sound
Generator X-tra)
You can reinforce the bass and create a
more powerful sound.
e DSGX setting is ideal for music
sources.
Press DSGX
repeatedly.
on the unit
Each time you press the button, the
display changes as follows:
DSGX ON DSGX OFF
Tip
e default setting is “DSGX ON.”
Setting the sound effect
repeatedly to select
“BASS”or “TREBLE.”
1
2
Press EQ
Press PRESET +/
repeatedly
to adjust the level.
ꢃꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Waking up to music
Play Timer
Other Operations
You can wake up to music at a preset
time. Make sure you have set the clock
(see “Setting the clock” (page 19)).
Using the timer
Falling asleep to music
Sleep Timer
1
Prepare the sound source.
Disc: Insert a disc.
Radio: Tune in the preset station
you want (see “Listening to the
radio” (page 48)).
You can set the system to turn off aſter a
certain time, so that you can fall asleep
to music.
2
Press VOLUME +/
the volume.
to adjust
Press SLEEP
repeatedly.
Each time you press the button, the
minute display changes cyclically as
follows:
.
3
4
Press TIMER MENU
90min
10min
80min
OFF
70min
…
Press or
repeatedly to
select “PLAY SET?,”then press
Other operations
.
ENTER
“ON” appears and the hour indication
To
Do this
Press SLEEP
flashes in the display.
Check the
remaining time
Change the
time to turn off repeatedly to select the
once.
5
Set the time to start playback.
Press SLEEP
Press or
repeatedly to set the
.
hour, then press ENTER
time you want.
Press SLEEP
repeatedly until “SLEEP
OFF” appears in the
display.
e minute indication flashes in the
display. Use the procedure above to
set the minute. “OFF” appears and the
hour indication flashes in the display.
Cancel the
Sleep Timer
6
7
Set the time to stop playback
using the same procedure as
step 5.
Select the sound source.
Press or
repeatedly until the
music source you want appears in the
display, then press ENTER . is
display will show the timer settings.
8
Press
system.
to turn off the
Continued
ꢃꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations
Changing the display
To
Do this
Check the
setting
1
Press TIMER
.
MENU
Checking the clock
“TIMER SEL?”
flashes in the display.
Press DISPLAY
when the system
2
3
Press ENTER
.
is turned off. The clock is displayed
for 8 seconds.
Press or
repeatedly to select
“PLAY SELECT?,”
then press
.
ENTER
Adjusting the brightness of the
display
Change the
setting
Start from step 1.
Cancel the Play
Timer
1
Press TIMER
.
Press DIMMER
repeatedly while
MENU
the system is on.
“TIMER SEL?”
flashes in the display.
Each time you press the button, the
display changes cyclically as follows:
2
3
Press ENTER
.
DIMMER OFF
DIMMER 2*
*
DIMMER 1
Press or
repeatedly to select
DIMMER 2 is the darkest.
“TIMER OFF?,” then
press ENTER
.
Notes
e Play Timer will not be activated if the
system is turned on or if “STANDBY” flashes
in the display.
e system turns on 30 seconds before the
preset time.
Before the system is turned off, if a
connection is made with the Bluetooth
headphones, sounds played by the Play Timer
may be output to the Bluetooth headphones.
ꢄ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
When playing an AUDIO CD or VIDEO
CD without PBC function:
Elapsed playing time of the current
track
Viewing information
about the disc
Remaining time of the current track
Elapsed playing time of the current
disc3)
Viewing information about the
disc in the front panel display
Remaining time of the current disc3)
Title of the disc1)4)
When playing a VIDEO CD/Super
VCD:
Press DISPLAY
.
Each time you press DISPLAY , the
display changes from
…
Elapsed playing time of the current
scene/track
Title of the disc1)4)
Disc information
Clock display (for 8 seconds)
When playing MPꢁ audio tracks on a
DATA CD/DVD:
Elapsed playing time of the current
track
Title of the track
Checking the elapsed playing time,
remaining time and titles
Press TIME/TEXT
during playback.
Each time you press TIME/TEXT , the
display changes from …
…
Checking the total playing time and
titles
Press TIME/TEXT
repeatedly when
When playing a DVD VIDEO or DVD-
R/-RW in VR mode:
When the menu or the title without a
chapter is played back
playback is stopped.
Each time you press TIME/TEXT
,
the display changes from
…
Elapsed playing time of the menu
DVD VIDEO or DVD-R/-RW in VR
mode:
or the current title
Title of the disc1)
Total number of titles on the disc
When a chapter other than above
condition is played back
Title of the disc1)
Elapsed playing time of the current
VIDEO CD without PBC playback or
AUDIO CD:
Total number of the tracks on the disc
and the total playing time of the disc
Title of the disc1)
title
Remaining time of the current title
Elapsed playing time of the current
chapter
Remaining time of the current
VIDEO CD with PBC playback:
Total number of scenes on the disc
Title of the disc1)
chapter
Title of the disc1)2)
Continued
ꢄ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1)
2)
“NO TEXT” appears in the display if the
DVD VIDEO is not a DVD-TEXT disc or the
VIDEO CD does not have text information.
Viewing information about the
disc in the on-screen display
e current chapter number and the current
title number are displayed for 2 seconds
before the display returns to elapsed playing
.
Press TIME/TEXT
time when you press TIME/TEXT
display of title of the disc.
during
Each time you press TIME/TEXT
while playing the disc, the display
3)
4)
When Program Play or Shuffle Play is
changes from …
…
e time display that you can view on the
TV screen depends on the disc you are
playing.
turned on, the elapsed playing time and the
remaining time of the disc would be skipped.
e current track number and the current
index number (for a disc without PBC) or the
current scene number (for a disc with PBC)
are displayed for 2 seconds before the display
T: title or track
C: chapter
D: disc
returns to elapsed playing time when you
press TIME/TEXT
title of disc.
during display of the
Bit rate
Notes
If you play back a disc containing JPEG
image files only, “JPEG” or “No Audio”
appears in the display.
Time information
You cannot use TIME/TEXT
to change
the display of disc information when:
a JPEG image file is played back.
playback is stopped for DATA CD/DVD
with MP3 audio tracks and/or JPEG
image files.
If the MP3 audio track title contains
characters which cannot be displayed, these
characters will be displayed as “*.”
Album Title
Disc/track/file title
When playing a DVD VIDEO or DVD-
R/-RW in VR mode:
Elapsed playing time of the current
title
Remaining time of the current title
Elapsed playing time of the current
chapter
Remaining time of the current chapter
Title of the disc
When playing a VIDEO CD/Super
VCD:
Elapsed playing time of the current
scene/track
Title of the disc
ꢄꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
When playing an AUDIO CD or VIDEO
CD without PBC function:
Elapsed playing time of the current
track
Checking the date information
of JPEG image files
Remaining time of the current track
Elapsed playing time of the current
disc
You can check the date information
during playback when Exif* tag is
recorded in the JPEG image files.
Remaining time of the current disc
Title of the disc
Press DISPLAY
during playback.
repeatedly
When playing a DATA CD/DVD:
Elapsed playing time of the current
track/file
e Control Menu appears.
Notes
Only alphabet letters, numbers and some
symbols can be displayed.
Depending on the disc, the system can only
display a limited number of characters.
Date information
For MP3 audio tracks with format other than
ISO 9660 Level 1 and Level 2, album title and
track title may not be displayed.
*
“Exchangeable Image File Format” is a
digital camera image format defined by the
Japan Electronics & Information Technology
Industries Association (JEITA).
Displaying the audio information of
the disc
(DVD VIDEO only)
Note
When you press AUDIO
repeatedly
e date information format varies depending
on the area.
during playback, the format of the
current audio signal is displayed on the
TV screen.
When playing a DVD VIDEO:
For example, in Dolby Digital format,
multiple signals ranging from monaural
to 5.1 channel signals can be recorded on
a DVD VIDEO.
Example:
For Dolby Digital 5.1 channel:
2 Surround components
2 Front components +
1 Center component
1 LFE (Low Frequency
Effect) component
ꢄꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO IN jack
Connect the audio output jack of an
optional component (portable audio
player, etc.).
Hooking up optional
components
To enhance your system, you can connect
optional components. Refer to the
operating instructions provided with
each component.
COMPONENT VIDEO OUT jacks
Connect the component video input
jacks of the TV or projector. If your
TV accept progressive format signals,
you must use this connection and
Front panel
press PROGRESSIVE
on the unit
repeatedly to select “P AUTO” or
“P VIDEO.” You can enjoy higher
quality video images.
S VIDEO OUT/VIDEO OUT jacks
Connect the S Video/video input
jack of the TV. You can enjoy higher
quality video images when you select
the S VIDEO.
DIGITAL OUT jack
Connect the digital optical input jack
of an optional digital component
(such as amplifier). You can enjoy
5.1 channel sound, if the connected
amplifier equipped with Dolby Digital
or DTS decoder.
Rear panel
Note
Sound is output only when the system
function is set to “DVD”.
ꢄꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying the multi channel
sound with the optional
amplifier
1
Connect the digital optical cord.
See “Hooking up optional
components” (page 64).
2
Connect the speakers to an
optional amplifier equipped
with a decoder.
For the speakers placement, refer to
the operating instructions supplied
with the connected amplifier.
3
4
Start playing a multi channel
source, such as a DVD VIDEO.
Select the audio format you
want.
See “Changing the sound” (page 25).
ꢄꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Additional Information
The clock or timer setting is canceled.
e power cord is disconnected or a
power failure occurred. Redo “Setting
the clock” (page 19). If you have set
the timer, redo “Waking up to music”
(page 59).
Troubleshooting
Should you encounter a problem with
your system, do the following:
“– –:– –” appears in the display.
1
2
Make sure the power cord and
speaker cords are connected
correctly and firmly.
A power failure has occurred. Set the
clock (page 19) and timer settings
(page 59) again.
Find your problem in the
troubleshooting checklist below and
take the indicated corrective action.
There is no sound.
Press VOLUME +
repeatedly.
e headphones are connected to the
If the problem persists aſter doing all
of the above, consult your nearest Sony
dealer.
.
PHONES jack
Check the speaker connections
(page 14).
e system is in pause mode, in Slow-
If the STANDBY indicator flashes
motion Play or in Lock Search. Press
Immediately unplug the power cord,
and check the following items.
(or DVD
on the unit) to
start the playback.
If the BLUETOOTH indicator
If your system has a voltage
selector, is the voltage selector set
to the correct voltage?
Are you using only the supplied
speakers?
Is anything blocking the ventilation
holes on the rear of the system?
is lit
or flashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack . Press and hold
BLUETOOTH OPR
for about
2 seconds until the BLUETOOTH
indicator
turns off.
Aſter the STANDBY indicator
stops flashing, reconnect the power
cord, and turn on the system, If the
issue persists, contact your nearest
Sony dealer.
There is severe hum or noise.
A TV or VCR is placed too close to the
unit. Move the unit away from the TV
or VCR.
Move the unit away from the source of
noise.
Connect the unit to a different wall
outlet.
Install a noise filter (commercially
available) to the power cord.
ꢄꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
The timer does not function.
Check the timer setting and set the
correct time (page 59).
Cancel the Sleep Timer function
(page 59).
Disc Player
The disc does not eject.
Consult your nearest Sony dealer.
Playback does not start.
Check whether a disc is loaded.
Wipe the disc clean (page 75).
Reinsert the disc.
Insert the disc that this system can play
back (page 5).
Insert the disc in the disc slot
the label side facing up.
Remove the disc and wipe away the
moisture on the disc, then leave the
system turned on for a few hours until
the moisture evaporates.
Press
unit) to start playback.
e region code on the DVD VIDEO
does not match the system.
Cancel the Custom Parental Control
function (page 40).
The remote does not function.
Remove the obstacles between the
remote and the unit.
Move the remote closer to the unit.
Point the remote at the unit’s sensor.
Replace the batteries (R6/size AA).
Locate the unit away from the
fluorescent light.
with
There is acoustic feedback.
Reduce the volume.
(or DVD
on the
The color irregularity on a TV screen
persists.
Turn off the TV set once, then turn it
on aſter 15 to 30 minutes. If the color
irregularity still persists, place the
speakers farther away from the TV set.
The sound skips.
Wipe the disc clean (page 75).
Reinsert the disc.
Move the unit to a place without
vibration (e.g., on top of a stable
stand).
THEATRE SYNC function does not
work.
If distance between the TV and this
unit is too far, this function may not
work. Install the unit near the TV.
Move the speakers away from the
unit, or place them on separate stands.
When you listen to a track with bass
sounds at high volume, the speaker
vibration may cause the sound to skip.
Speakers
Sound comes from one channel or
unbalanced left and right volume.
Place the speakers as symmetrically as
possible.
Check that the speakers are connected
securely and correctly.
e source being played back is
monaural.
Continued
ꢄꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback does not start from the first
track.
e system is in Program Play or
Shuffle Play mode. Turn off Program
Play and Shuffle Play.
e system can playback to a depth of
8 folders only.
For MP3/JPEG files, check the “MODE
(MP3, JPEG)” setting (page 37).
e disc contains more than 200
albums.
e album contains more than 600
tracks/files.
For MP3/JPEG files, the album
contains more than 300 tracks/files
when the “MODE (MP3, JPEG)” is set
to “AUTO.”
Resume Play has been selected. Press
twice. en, press
to start
playback (page 27).
e title of DVD VIDEO or PBC
menu automatically appears on the TV
screen.
Playback starts automatically.
e DVD VIDEO features an auto
playback function.
e JPEG image file does not have the
extension “.JPG” or “.JPEG”.
e JPEG image file is larger than
3,072 (width) × 2,048 (height) in
Playback stops automatically.
normal mode, or more than 2,000,000
pixels in Progressive JPEG mode which
is mainly used on the Internet website.
Some discs may contain an auto pause
signal. While playing such a disc, the
playback stops at auto pause signal.
JPEG image files with a high width to
length ratio cannot be played back.
You cannot perform some functions
such as Stop, Lock Search, Slow-
motion Play, Repeat Play, Shuffle Play
or Program Play.
The MPꢁ audio tracks take longer
time to play back than others.
Aſter the system reads all the tracks on
the disc, playback may take more time
than usual if:
the number of albums or tracks on
the disc is very large.
the album and track organization
structure is very complex.
Depending on the disc, you may not
be able to do some of the operations
above. Refer to the operating
instructions supplied with the disc.
The DATA CD (MPꢁ audio track/JPEG
image file) cannot be played back.
e DATA CD is not recorded in a
format that conforms to ISO 9660
Level 1, Level 2, or Joliet (expansion
format).
The disc title, album title, track title
and DVD-TEXT characters do not
appear properly.
e DATA DVD is not recorded
in a format that conforms to UDF
(Universal Disk Format).
e MP3 audio track does not have the
extension “.MP3”.
e data is not stored in the desired
format.
e MP3 audio tracks in format other
than MPEG 1 Audio Layer 3 cannot be
played back.
Use a disc that conforms to the
ISO 9660 Level 1, Level 2, or Joliet
(expansion).
e character code that can be
displayed by this system are as follows:
Upper cases (A to Z)
Lower cases (a to z)
Numbers (0 to 9)
Symbols (< > * +, / [ ] _)
Other characters may not be displayed
correctly.
ꢄꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
The surround effect is difficult to hear
when you are playing a Dolby Digital
or MPEG audio sound track.
Check the speaker connections (page
14).
Depending on the DVD VIDEO, the
output signal may not be the entire 5.1
channel. It may be monaural or stereo,
even if the sound track is recorded in
Dolby Digital or MPEG audio format.
The sound skips or fluctuates, or the
connection is lost.
e system and the Bluetooth device
are too far apart.
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
The sound loses stereo effect when
you play back an AUDIO CD, VIDEO
CD, MPꢁ audio track or DVD VIDEO.
Make sure the system is connected
properly.
The sound of your Bluetooth device
cannot be heard on this system.
Turn up the volume on your Bluetooth
device first, and then adjust the volume
Bluetooth device
using VOLUME +/
.
Pairing cannot be done.
Severe hum or noise
Move the Bluetooth device closer to
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
the system.
Pairing may not be possible if other
Bluetooth devices are present around
the system. In this case, turn off the
other Bluetooth devices.
Connection is not possible.
e Bluetooth device you attempted
to connect does not support the A2DP
and AVRCP profiles, and cannot be
connected with the system.
Enable the Bluetooth function of the
Bluetooth device.
e pairing registration information
has been erased. Perform the pairing
operation again.
While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.
Turn down the volume of the
connected Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
Turn down the volume of the system
using VOLUME . If your
headphones have a volume control,
also adjust the volume using the
headphone’s volume control.
Press DSGX
on the unit repeatedly
until “DSGX OFF” appears.
Press EQ
repeatedly to select
“BASS” or “TREBLE,” and then press
PRESET
the level.
repeatedly to turn down
Continued
ꢄꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality. If you still experience
problems aſter checking your
Picture
There is no picture.
Press FUNCTION +/
repeatedly
to select “DVD” (or press DVD
on the unit).
connections, connect your unit directly
to your TV’s S Video input (page 17).
Check that the system is connected
securely.
e video cord is damaged. Replace it
with a new one.
Keep the speaker cords away from the
antennas.
When you connect your TV to the
COMPONENT VIDEO OUT jacks
and play back video-based soſtware
in progressive signal format, some
sections of the image may appear
unnatural due to the conversion
process.
Make sure you connect the unit to the
video input jack of your TV (page 17).
Make sure you turn on the TV and
operate the TV correctly.
Press PROGRESSIVE
on the unit
repeatedly to select “INTERLACE”
if you connect your TV to the unit’s
COMPONENT VIDEO OUT jacks
and your TV cannot accept progressive
signal.
The aspect ratio of the TV screen
cannot be changed even though you
can set “TV TYPE” under “SCREEN
SETUP” in the Setup Menu when you
play back a wide picture.
e aspect ratio is fixed on your DVD
VIDEO.
If you connect the unit with the S
Video cord, connect directly to the TV.
Otherwise, you may not change the
aspect ratio.
Depending on the TV, you may not
change the aspect ratio.
You have set to progressive format but
your TV cannot accept the signal in
progressive format. In this case, set to
interlace format (the default setting)
(page 18).
Even if your TV is compatible with
progressive format (525p/625p)
signals, the image may be affected
when you set to progressive format. In
this case, set to interlace format (the
default setting) (page 18).
Make sure you select the video input
on the TV so that you can view the
pictures from the system.
Make sure you connect the unit and
your TV using only the supplied video
cord.
Messages do not appear on the TV
screen in the language you want.
Select the language you want for the
on-screen display in “OSD” under
“LANGUAGE SETUP” in the Setup
Menu (page 44).
Picture noise appears.
Clean the disc.
The language for the sound track
cannot be changed.
Multilingual tracks are not recorded on
the DVD VIDEO being played back.
e DVD VIDEO prohibits changing
the language for the sound track.
ꢅ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The subtitles language cannot be
changed.
Multilingual subtitles are not recorded
on the DVD VIDEO being played
back.
e DVD VIDEO prohibits changing
the subtitles.
Try turning off the surrounding
electrical equipment.
A stereo FM program cannot be
received in stereo.
Press FM MODE
repeatedly until
“MONO” disappears from the display.
The system cannot receive satellite
channels at all.
Check that the XM Mini-Tuner and
Home Dock or the SiriusConnect
Home tuner are connected properly.
e receiving condition is not good.
Move to the place where the condition
is good.
Check that you subscribed to the
desired satellite radio service (pages 16
and 17).
The subtitles cannot be turned off.
e DVD VIDEO prohibits turning off
subtitles.
The angles cannot be changed.
Multi-angles are not recorded on the
DVD VIDEO being played back.
e DVD VIDEO prohibits changing
the angles.
Tuner
The radio presetting is canceled.
Optional components
e power cord is disconnected or a
power failure occurred for longer than
half a day. Redo “Listening to preset
radio station” (page 49).
There is no sound.
Refer to General item “ere is no
sound.” (page 66) and check the
condition of the system.
Connect the component properly
(page 64) while checking:
if the cords are connected properly.
if the cord plugs are firmly inserted
all the way.
There is severe hum or noise.
(“TUNED” or “ST” flashes in the
display)
Set the proper band and frequency
(page 48).
Connect the antenna properly
(page 14).
Find a place and an orientation that
provide good reception, then set up
the antenna again. If you cannot obtain
good reception, we recommend that
you connect a commercially available
external antenna.
Turn on the connected component.
Refer to the operating instructions
supplied with the connected
component and start playing.
Keep the antennas, SiriusConnect
Home tuner, and AC adaptor away
from the speaker cords and the power
cord to avoid picking up noise.
e supplied FM lead antenna receives
signals along its entire length, so make
sure you extend it fully.
Locate the antennas as far away from
the speaker cords as possible.
Continued
ꢅ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
If the system still does not operate
properly after performing the
above measures or other troubles
not described above occur, reset the
system as follows:
Self-diagnosis Function
(When letters/numbers appear in the
display)
When the self-diagnosis function
is activated to prevent the system
from malfunctioning, a 5-character
service number (e.g. C 13 50) with a
combination of a letter and 4 digits
appears on the TV screen and the front
panel display. In this case, check the
following table.
Use buttons on the unit to reset the
system to its factory default settings.
1
2
3
4
Unplug the power cord.
Plug the power cord back in.
Press
to turn on the system.
First ꢁ
Cause and corrective
Press , DISPLAY
and
characters of action
the service
at the same time.
“RESET” appears in the display.
number
e system is reset to the factory settings
except for DVD settings. You should set
the settings you made, such as the preset
stations, clock and timer.
C 13
is disc is dirty.
Clean the disc with a
soſt cloth (page 75).
C 31
e disc is not inserted
correctly.
To return the DVD setup to the default
settings*, perform reset as follows:
Restart the system,
then re-insert the
disc correctly.
when playback
1
Press DISPLAY
is stopped.
E XX
(XX is a
number)
To prevent a
malfunction, the
system has performed
the self-diagnosis
function.
e Control Menu appears on the TV
screen.
2
Press or
repeatedly to
(SETUP), then press
Contact your nearest
Sony dealer or local
authorized Sony
service facility and
give the 5-character
service number.
Example: E 61 10
select
.
ENTER
3
4
Press or
repeatedly to select
“RESET,”then press ENTER
.
Press or
repeatedly to select
.
“YES,”then press ENTER
It takes a few seconds to complete. Do
not press
system.
when resetting the
*
Except for Parental Control settings
ꢅꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
When displaying the version number
on the TV screen
Messages
When you turn on the system, the
version number [VER.X.XX] (X is a
number) may appear on the TV screen.
Although this is not a malfunction and
for Sony service use only, normal system
operation will not be possible. Turn off
the system, and then turn on the system
again to operate.
One of the following messages may
appear or flash in the front panel display
during operation.
DVD player, Tuner
Cannot Play
A disc that cannot be played back was
inserted.
A DVD VIDEO with unsupported
region code was inserted.
Data Error
e MP3 audio track and JPEG image
file you want to play back is damaged.
e MP3 audio track does not conform
to MPEG 1 Audio Layer 3 format.
e JPEG image file does not conform
to DCF format.
e MP3 audio track has the extension
“.MP3” but it is not in MP3 format.
e JPEG image file has the extension
“.JPG” or “.JPEG” but it is not in JPEG
format.
No Disc
ere is no disc in the disc slot
.
Not In Use
You have pressed a button whose
operation is not allowed or invalid at that
time.
OFF TIME NG!
e on time and off time of Play Timer
is the same.
Continued
ꢅꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
PASSWORD
Custom Parental Control or Parental
Control is set.
XM
ANTENNA
e XM Mini-Tuner and Home Dock
are not connected. Check all the
connections, and then turn the system
on again.
Please Wait
e system is doing initialization process.
Reading
e system is reading information of the
disc. Some buttons are not available.
CH – – –
You have entered an invalid channel
number. e channel to be tuned-in is
void due to the change by the broadcast
service, or the receiving condition is not
good.
Bluetooth device
Connect
Bluetooth communication was
established.
LOADING
e system have not finished receiving
the entire audio data or text information.
Some buttons are not available.
Disconnect
Communication with a Bluetooth device
was cut off for some reason, or Bluetooth
communication was ended.
NO SIGNAL
e receiving condition is not good. Try
moving the antenna to another location.
Make sure the antenna points south. For
details about the antenna location, see
the instructions supplied with the XM
Mini-Tuner and Home Dock.
Not Connect
Connection was not possible.
No Device
A pairable Bluetooth device was not
found, or connection was not possible.
OFF AIR
Not In Use
e system is not connected with a
Bluetooth device using AVRCP.
e channel is not broadcasted now.
UPDATING
You have not subscribed for XM or the
channel is not authorized. You need to
subscribe for XM.
PIN?
e system is asking for the passcode.
For details, see “Using the Bluetooth
function” (page 52).
– – – – – –
ere is no text information or time
information in the channel. is is not
an error. e text information may not
be displayed depending on the system
condition, for example, right aſter the
system has received a channel.
Please Wait
e system is readying for usage of a
Bluetooth device.
ꢅꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
SIRIUS
Precautions
ANTENNA
e antenna is not connected properly.
Check the connection between the
SiriusConnect Home tuner and the
antenna.
Discs that this system CANNOT play
Discs of non-standard shape (for example,
heart, square, star)
Discs that have adhesive tape, paper, or
sticker attached to them
Rental or used discs with attached seals
where the glue extends beyond the seal
Discs that have labels printed using ink that
feels tacky when touched
ACQUIRING
e receiving condition is not good. Try
moving the antenna to another location.
For details about the antenna location,
see the instructions supplied with the
SiriusConnect Home tuner.
Notes on discs
Before playing, wipe the disc with a cleaning
cloth from the center out to the edge.
Do not clean discs with solvents, such as
benzine thinner, or commercially available
cleaners or anti-static spray intended for
vinyl LPs.
Call ꢆꢆꢆ–ꢃꢁꢇ–SIRI
You have not subscribed for the selected
channel.
CHECK SIRIUS
e SiriusConnect Home tuner is
not connected properly. Check all the
connections, and then turn the system on
again. Also make sure if the AC adaptor
supplied with the SiriusConnect Home
tuner is connected to a wall socket.
Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.
Do not use discs encircled with a protection
ring. is may cause a malfunction to the
system.
On operating voltage
Invalid
Before operating the system, check that the
operating voltage of the unit is identical with
the voltage of your local power supply.
You have entered an invalid channel
number. e channel to be tuned-in is
void due to the change by the broadcast
service, or the receiving condition is not
good.
On safety
e unit is not disconnected from the
AC power source (mains) as long as it is
connected to the wall socket, even if the unit
itself has been turned off.
Completely disconnect the power cord
(mains lead) from the wall socket (mains)
if it is not going to be used for an extended
period of time. When unplugging the unit,
always grip the plug. Never pull the cord
itself.
Should any solid object or liquid get into
the system, unplug the system, and have
it checked by qualified personnel before
operating it again.
SUB UPDATED
You have not subscribed for SIRIUS or
the channel is not authorized. You need
to subscribe for SIRIUS.
UPDATING
Channel information or SiriusConnect
Home tuner firmware is being updated.
– – – – – –
ere is no text information or time
information in the channel. is is not
an error. e text information may not
be displayed depending on the system
condition, for example, right aſter the
system has received a channel.
e AC power cord can be changed only by a
qualified service facility.
Continued
ꢅꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
On placement
Do not place the system in an inclined
position or in locations that are extremely
hot, cold, dusty, dirty, or humid or lacking
adequate ventilation, or subject to vibration,
direct sunlight or a bright light.
Be careful when placing the unit or speakers
on surfaces that have been specially treated
(for example, with wax, oil, polish) as
staining or discoloration of the surface may
result.
If the system is brought directly from a cold
to a warm location or is placed in a very
damp room, moisture may condense on the
lens inside the DVD player, and cause the
system to malfunction. In this situation,
remove the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
Specifications
Main unit (HCD-DH7BT/DVD Receiver)
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, both channels driven,
from 120 – 10,000 Hz; rated 50 watts per
channel minimum RMS power, with no
more than 10% total harmonic distortion
from 250 milliwatts to rated output.
Amplifier section
DIN power output (rated):
40 W + 40 W (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
50 W + 50 W (6 ohms at 1 kHz, 10%
THD)
Inputs:
On heat buildup
Heat buildup on the unit during operation is
normal and is not cause for alarm.
Do not touch the cabinet if it has been used
continuously at a high volume because the
cabinet may have become hot.
AUDIO IN (stereo mini jack):
Voltage 620 mV, impedance
47 kilohms
Outputs:
DIGITAL OUT (square optical connector
jack):
Do not obstruct the ventilation holes.
Wavelength 660 nm
VIDEO OUT (phono jack):
Max. output level 1 Vp-p, unbalanced,
Sync. negative load impedance
75 ohms
On the speaker system
e front speaker is magnetically shielded and
can be installed near a TV. Color irregularity
may still be observed, however on some types
of TV screens. In this situation, turn off the
TV, wait 15 to 30 minutes, and turn it back
on. Place the right speaker on the right side of
the unit and the leſt speaker on the leſt side of
the unit. If there is no improvement, move the
speakers far away from the TV.
COMPONENT VIDEO OUT:
Y: 1 Vp-p, 75 ohms
Pb/Cb: 0.7 Vp-p, 75 ohms
Pr/Cr: 0.7 Vp-p, 75 ohms
S VIDEO OUT (4-pin/mini-DIN jack):
Y: 1 Vp-p, unbalanced, Sync. negative
C: 0.286 Vp-p, load impedance
75 ohms
IMPORTANT NOTICE
PHONES (stereo mini jack):
accepts headphones of 8 ohms or
more
Caution: If you leave a still video image
or on-screen display image displayed on
your TV for an extended period of time via
this system, you risk permanent damage
to your TV screen. Projection TVs are
especially susceptible to this.
Cleaning the cabinet
Clean this system with a soſt cloth slightly
moistened with a mild detergent solution.
Do not use any type of abrasive pad, scouring
powder, or solvent, such as thinner, benzine,
or alcohol.
ꢅꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth section
Tuner section
Communication system:
FM stereo, FM/AM superheterodyne tuner
Bluetooth Standard version 2.0
FM tuner section
Output:
Tuning range:
Bluetooth Standard Power Class 2
87.5 108.0 MHz (100 kHz step)
Antenna:
Maximum communication range:
Line of sight approx. 10 m1)
Frequency band:
FM lead antenna
Antenna terminals:
75 ohms unbalanced
Intermediate frequency:
10.7 MHz
2.4 GHz band (2.4000 GHz – 2.4835
GHz)
Modulation method:
FHSS
AM tuner section
Tuning range:
Compatible Bluetooth profiles2):
A2DP (Advanced Audio Distribution
Profile)
530 1,710 kHz (with the interval set
at 10 kHz)
AVRCP (Audio Video Remote
Control Profile)
531 1,710 kHz (with the interval set
at 9 kHz)
Supported codecs:
Antenna:
Receive: SBC (Sub Band Codec), MP3
Transmit: SBC (Sub Band Codec)
1) e actual range will vary depending
on factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
reception sensitivity, antenna’s
performance, operating system,
soſtware application, etc.
AM loop antenna
Antenna terminals:
External antenna terminal
Intermediate frequency:
450 kHz
Speaker (SS-CDHꢁ)
Speaker system:
2-way, bass-reflex type, magnetically
shielded
2) Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
Speaker units:
Woofer: 12 cm, cone type
Tweeter: 4 cm, cone type
Nominal impedance:
6 ohms
Disc player section
System:
Dimensions (w/h/d):
Approx. 140 × 250 × 211 mm
Mass:
Compact disc and digital audio and
video system
Laser:
Approx. 2.2 kg net per speaker
Laser Diode Properties:
Emission duration: continuous
Laser Output*: Less than 1000 µW
* is output is the value measurement
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Semiconductor laser:
(DVD: λ=650 nm, CD: λ=790 nm)
Frequency response:
DVD (PCM 48 kHz): 2 Hz 22 kHz
( 1dB)
CD: 2 Hz 20 kHz ( 0.5 dB)
Video color system format:
NTSC
Continued
ꢅꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Power requirements:
120 V AC, 60 Hz
Power consumption:
40 W
Dimensions (w/h/d) (Approx.):
190 × 141 × 273 mm
Mass (Approx.):
2.8 kg
Supplied accessories:
Remote Commander (RM-SCD30)(1)
R6 (Size AA) batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Video cord (1)
Speaker pads (8)
Design and specifications are subject to
change without notice.
• Standby power
consumption: 0.5 W
• Halogenated flame
retardants are not used in
the certain printed wiring
boards.
ꢅꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Control Menu display
Use the Control Menu to select a function and to view related information. Press
DISPLAY
follows:
repeatedly to turn on, turn off or change the Control Menu display as
Control Menu display 1 Control Menu display 2 (appears for certain discs only)
Control Menu display off Control Menu display 1 …
Control Menu display
e Control Menu display 1 and 2 will show different items depending on the disc type.
Example: Control Menu display 1 when playing a DVD VIDEO
Currently playing title number
Currently playing chapter number
Total number of titles
Total number of chapters
Playback status ( Playback,
Pause, Stop, etc.)
Control Menu
items
Type of disc being played
back
Elapsed playing time
Selected item
Current setting
Options
Function name of
selected Control
Menu item
Operation message
Continued
ꢅꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Control Menu items
Item
Item Name, Relevant Disc Type, Function
TITLE/SCENE/TRACK
Selects the title, scene, or track to be played back.
CHAPTER/INDEX
Selects the chapter or index to be played back.
TRACK
Selects the track to be played back.
ORIGINAL/PLAY LIST
Selects the playback sequence either to the originally recorded
sequence or to the playlist created on the disc.
TIME/TEXT
Checks the elapsed playing time and the remaining time.
Inputs the time code for picture and music searching.
Displays the text information on the DVD TEXT discs and MP3 audio
tracks.
PROGRAM
Plays back the track in the order you want.
SHUFFLE
Plays back the track in random order.
REPEAT
Plays back a disc repeatedly, the entire disc (all titles/all tracks/all
albums) repeatedly or one title/chapter/track/album/file repeatedly.
A/V SYNC
Sets the delay time between the sound and display.
PARENTAL CONTROL
Sets to prohibit playback on this system.
ꢆ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Item Name, Relevant Disc Type, Function
SETUP
QUICK Setup
Use QUICK SETUP to choose the language of the on-screen display
and the aspect ratio of the TV.
CUSTOM Setup
In addition to the QUICK SETUP setting, you can adjust other
settings.
RESET
Returns the settings in “SETUP” to the default setting.
ALBUM
Selects the album to be played back.
FILE
Selects the JPEG image file to be played back.
DATE
Displays the date when the picture was taken by a digital camera.
INTERVAL
Specifies the duration for which the slides are displayed on the TV
screen.
EFFECT
Selects the transition effects to be used for changing slides during a
slide show.
MODE (MPꢁ, JPEG)
Selects the data type: MP3 audio track (AUDIO), JPEG image file
(IMAGE) or both (AUTO) to be played back when playing a DATA
CD/DVD.
ꢆ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Language code list
e language spellings conform to the ISO 639:1988 (E/F) standard.
Code Language
1027 Afar
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
Code Language
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
Code Language
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1358 Maltese
1363 Burmese
1365 Nauru
1369 Nepali
1376 Dutch
1379 Norwegian
1393 Occitan
Code Language
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1525 Telugu
1527 Tajik
1528 ai
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1061 Bislama
1248 Indonesian
1403 (Afan) Oromo 1534 Setswana
1066 Bengali; Bangla 1253 Icelandic
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto; Pushto 1540 Tatar
1436 Portuguese
1463 Quechua
1535 Tonga
1538 Turkish
1539 Tsonga
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1254 Italian
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1313 Latin
1543 Twi
1557 Ukrainian
1481 Rhaeto-Romance 1564 Urdu
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-Croatian 1697 Zulu
1503 Singhalese
1505 Slovak
1506 Slovenian
1507 Samoan
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1703 Not specified
1326 Lingala
1327 Laothian
1332 Lithuanian
1171 Faroese
1174 French
1181 Frisian
1183 Irish
1334 Latvian; Lettish 1508 Shona
1345 Malagasy
1347 Maori
1509 Somali
1511 Albanian
1512 Serbian
1349 Macedonian
ꢆꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Control area code list
Code Area
Code Area
2165 Finland
2174 France
2109 Germany
2248 India
2238 Indonesia
2254 Italy
2276 Japan
Code Area
2362 Mexico
Code Area
2149 Spain
2499 Sweden
2086 Switzerland
2528 ailand
2184 United Kingdom
2044 Argentina
2047 Australia
2046 Austria
2057 Belgium
2070 Brazil
2079 Canada
2090 Chile
2092 China
2115 Denmark
2376 Netherlands
2390 New Zealand
2379 Norway
2427 Pakistan
2424 Philippines
2436 Portugal
2489 Russia
2304 Korea
2363 Malaysia
2501 Singapore
ꢆꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective communication range
Bluetooth devices should be used within
approximately 10 meters (unobstructed
distance) of each other. e effective
communication range may become
shorter under the following conditions.
Bluetooth wireless
technology
Bluetooth wireless technology is a short-
range wireless technology linking digital
devices, such as personal computers and
digital still cameras. Using the Bluetooth
wireless technology, you can operate the
units involved within a range of about 10
meters.
When a person, metal object, wall
or other obstruction is between the
devices with a Bluetooth connection
Locations where a wireless LAN is
installed
Around microwave ovens that are in
use
Locations where other electromagnetic
waves occur
e Bluetooth wireless technology is
commonly used between two devices,
but a single device can be connected to
multiple devices.
You do not need wires to get connected
as you do with a USB connection, and
you do not need to place the devices face
to face as you do with wireless infrared
technology. You can use the technology
with one Bluetooth device in your bag
or pocket.
Bluetooth wireless technology is a global
standard supported by thousands of
companies. ese companies produce
products that meet the global standard.
Effects of other devices
Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth device near a device with
wireless LAN capability, electromagnetic
interference may occur. is could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try
the following remedies:
Try connecting this system and
Bluetooth mobile phone or Bluetooth
device when you are at least 10
meters away from the wireless LAN
equipment.
Turn off the power to the wireless LAN
equipment when using your Bluetooth
device within 10 meters.
Supported Bluetooth version and
profiles
Profile refers to a standard set of
capabilities for various Bluetooth product
capabilities. is system supports the
following Bluetooth version and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.0
Supported Bluetooth profiles:
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
ꢆꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Effects on other devices
e radio waves broadcast by this system
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn
off the power on this system, Bluetooth
mobile phone and Bluetooth device in
the following locations:
Playable Bluetooth
devices
You can check the websites below for the
Bluetooth compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
In hospitals, on trains, in airplanes,
at gas stations, and any place where
flammable gasses may be present
ElectronicsSupport/>
Near automatic doors or fire alarms
ElectronicsSupport/>
Notes
For customers in Europe:
is system supports security functions that
comply with the Bluetooth specification
as a means of ensuring security during
communication using Bluetooth technology.
However, this security may be insufficient
depending on the setting contents and
other factors, so always be careful when
performing communication using Bluetooth
technology.
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Sony cannot be held liable in any way
for damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
Bluetooth communication is not necessarily
guaranteed with all Bluetooth devices that
have the same profile as this system.
Bluetooth devices connected with this system
must comply with the Bluetooth specification
prescribed by the Bluetooth SIG, Inc., and
must be certified to comply. However, even
when a device complies with the Bluetooth
specification, there may be cases where
the characteristics or specifications of the
Bluetooth device make it impossible to
connect, or may result in different control
methods, display or operation.
Noise may occur or the audio may
cut off depending on the Bluetooth
device connected with this system,
the communications environment, or
surrounding conditions.
ꢆꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD VIDEO
A disc that contains up to 8 hours of
moving pictures even though its diameter
is the same as an AUDIO CD.
Glossary
Album
e data capacity of a single-layer and
single-sided DVD VIDEO, at 4.7 GB
(Giga Byte), is 7 times that of an AUDIO
CD. Furthermore, the data capacity of a
dual-layer and single-sided DVD VIDEO
is 8.5 GB, a single-layer and double-sided
DVD VIDEO 9.4 GB, and a dual-layer
and double-sided DVD VIDEO 17 GB.
e picture data uses the MPEG 2
format, one of the worldwide standards
for digital compression technology. e
picture data is compressed to about 1/40
of its original size. e DVD VIDEO
also uses variable rate coding technology
that changes the data to be allocated
according to the status of the picture.
e audio data is recorded in Dolby
Digital as well as in PCM, allowing you to
enjoy more realistic audio presence.
Furthermore, various advanced functions
such as the multi-angle, multilingual, and
Parental Control functions are provided
with the DVD VIDEO.
Section of a music or picture piece on
a DATA CD or DATA DVD containing
MP3 audio tracks, JPEG image files.
Chapter
Subdivision of a title on a DVD VIDEO.
A title is composed of several chapters.
Dolby Digital
is sound format for movie theaters is
more advanced than Dolby Surround
Pro Logic. In this format, the surround
speakers output stereo sound with
an expanded frequency range and a
subwoofer channel for deep bass is
independently provided. is format is
also called “5.1” because the subwoofer
channel is counted as 0.1 channel (since
it functions only when a deep bass effect
is needed). All six channels in this format
are recorded separately to realize superior
channel separation. Furthermore, since
all the signals are processed digitally, less
signal degradation occurs.
DVD-RW
A DVD-RW is a recordable and
DTS
rewritable disc that is the same size as
a DVD VIDEO. e DVD-RW has two
different modes: VR mode and Video
mode. DVD-RWs created in Video
mode have the same format as a DVD
VIDEO, while discs created in VR (Video
Recording) mode allow the contents to
be programmed or edited.
Digital audio compression technology
that the Digital eater Systems, Inc.
developed. is technology conforms
to 5.1-channel surround. e surround
channel is stereo and there is discrete
subwoofer channel in this format. DTS
provides the same 5.1 discrete channels
of high quality digital audio. e good
channel separation is realized because the
all channel data is recorded discrete and
processed in digital.
ꢆꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD+RW
Multilingual function
A DVD+RW (plus RW) is a recordable
and rewritable disc. DVD+RWs use a
recording format that is comparable to
the DVD VIDEO format.
Several languages for the sound or
subtitles in a picture are recorded on
some DVD VIDEOs.
Parental Control
File
A function of the DVD VIDEO to limit
playback of the disc by the age of the
users according to the limitation level in
each country. e limitation varies from
disc to disc; when it is activated, playback
is completely prohibited, violent scenes
are skipped or replaced with other scenes
and so on.
A JPEG image file recorded on a DATA
CD or DATA DVD. (“File” is an exclusive
definition for this system.) A single file
consists of a single image.
Film based software, Video based
software
DVD VIDEOs can be classified as Film
based or Video based soſtware. Film
based DVD VIDEOs contain the same
images (24 frames per second) that are
shown at movie theaters. Video based
DVD VIDEOs, such as television dramas
or sitcoms, displays images at 30 frames
(or 60 fields) per second.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version
2.0) to control playback. By using menu
screens recorded on VIDEO CDs with
PBC functions, you can enjoy playing
simple interactive programs, programs
with search functions, and so on.
Progressive format (sequential
scanning)
Interlace format (Interlaced scanning)
e Interlace format is the NTSC
standard method for displaying TV
images at 30 frames per second. Each
frame is scanned twice-alternately
between the even numbered scanning
lines and then odd numbered scanning
lines, at 60 times per second.
In contrast to the Interlace format,
the progressive format can reproduce
50 60 frames per second by
reproducing all scanning lines (525
lines for the NTSC system, 625 lines
for PAL system). e overall picture
quality increases and still images, text
and horizontal lines appear sharper. is
format is compatible with the 525 or 625
progressive format.
Multi-angle function
Various angles, or viewpoints of the video
camera, for a scene are recorded on some
DVD VIDEOs.
Continued
ꢆꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Region Code
VIDEO CD
is system is used to protect copyrights.
A region code is allocated on each DVD
system or DVD VIDEO according to
the sales region. Each region code is
shown on the unit as well as on the disc
packaging. e system can play back
the discs that match its region code. e
system can also play back discs with the
A compact disc that contains moving
pictures.
e picture data uses the MPEG 1
format, one of the worldwide standards
for digital compression technology. e
picture data is compressed to about 1/140
of its original size. Consequently, a 12 cm
VIDEO CD can contain up to 74 minutes
of moving pictures.
“
” mark. Even when the region code
is not shown on the DVD VIDEO, the
region limit may still be activated.
VIDEO CDs also contain compact audio
data.
Sounds outside the range of human
hearing are compressed while the
sounds we can hear are not compressed.
VIDEO CDs can hold 6 times the audio
information of conventional AUDIO
CDs.
Scene
On a VIDEO CD with PBC functions,
the menu screens, moving pictures and
still pictures are divided into sections
called “scenes.”
ere are 2 versions of VIDEO CDs.
Version 1.1: You can play back only
Title
moving pictures and sounds.
e longest section of a picture or a
music piece on a DVD VIDEO; a movie,
etc., for a picture piece on video soſtware,
or the entire album in audio soſtware.
Version 2.0: You can play back high-
resolution still pictures and enjoy PBC
functions.
is system conforms to both versions.
Track
Section of a picture or a music piece on
a VIDEO CD, CD, or MP3. An album is
composed of several tracks (MP3 only).
ꢆꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
D
L
16:09 45
DATA CD 5
DATA DVD 5
DIMMER 60
DISPLAY 19
Dolby Digital 86
DTS 86
Language Code List 82
Listening to other
4:3 LETTER BOX 45
4:3 OUTPUT 46
4:3 PAN SCAN 45
components 64
Listening to the radio 48
Locating a specific point by
watching the TV screen 32
A
DVD 5
DVD’s menu 31
M
ALBUM 81
ANGLE 24
MENU 44
MODE (MP3, JPEG) 81
MP3 5
E
AUDIO 44
AUDIO DRC 47
MULTI-DISC RESUME
F
Multilingual function 87
Multi Session CD 7
B
Fast forward 23
Fast reverse 23
FILE 81
BACKGROUND 45
Batteries 15
O
BLACK LEVEL 45
BLACK LEVEL
File 87
Film based soſtware 87
Freeze Frame 24
Front panel 64
Front panel display 13
OSD 44
(COMPONENT OUT) 46
Bluetooth device address 54
Other Component Hookup 64
P
H
PARENTAL CONTROL
C
Handling discs 23
CATEGORY 49
CATEGORY MODE 49
Parental Control 87
I
INDEX 80
Instant Advance 24
Instant Replay 24
INTERLACE 18
Interlace format 87
COLD RESET 72
COMPONENT VIDEO OUT
Passkey 53
PAUSE MODE 46
PBC Playback 26
PIN 53
Continuous play 37
Controlling the TV 19
Control Menu Display 79
CUSTOM 43
CUSTOM PARENTAL
CONTROL 39
CUSTOM SETUP 46
Playback Control (PBC) 87
Playing a disc 23
Play Timer 59
J
Program Play 27
PROGRESSIVE AUTO 18
Progressive format 87
PROGRESSIVE VIDEO 18
Continued
ꢆꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
R
U
Rear Panel 64
Region Code 88
Remote 9
Usable discs 5
V
Repeat Play 29
Resume Play 26
X
XM 16
XM Radio ID 49
S
SCENE 80
Scene 88
SCREEN SETUP 20
Searching 31
Selecting 31
SETUP 81
Setup Display 20
Shuffle Play 29
SIRIUS 17
SIRIUS ID 49
Sleep Timer 59
Slow-motion Play 24
SUBTITLE 45
S VIDEO 64
T
THEATRE SYNC 21
TIME/TEXT 80
Timer 59
TRACK 80
TRACK SELECTION 47
Troubleshooting 66
TV Hookup 17
TV TYPE 45
ꢇ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢇ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|