DATA PROJECTOR
VPL-CX75
VPL-CX76
VPL-CX85
VPL-CX86
VPL-FX51
VPL-FX52
VPL-FX52L
VPL-PX35
VPL-PX40
VPL-PX41
PROTOCOL MANUAL
1st Edition (Revised 7)
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1. Introduction
Appendix A.
Setup Method For VPL-PX35 and PX40
2. RS-232C (VPL-CX75 and
VPL-CX76 are excluded.)
A-1. Command ......................................................................... 18
A-1-1.
A-1-2.
Setting..................................................................... 18
Display ................................................................... 19
2-1. Communication Specifications .......................................... 1
2-2. Command Block Format.................................................... 2
2-3. Block Format ..................................................................... 3
2-4. Connection ......................................................................... 4
2-5. Communication Procedure ................................................ 4
A-2. Setting Command ............................................................ 20
Appendix B
2-5-1.
Outline of Communication ....................................... 4
2-6. Communication Rules ....................................................... 5
2-7. Approximate Return Waiting Times ................................. 5
3. NETWORK
3-1. Introduction........................................................................ 6
3-1-1.
Advertisement .......................................................... 6
3-1-1-1. Function................................................................. 6
3-1-1-2. Setup Items ............................................................ 6
3-1-2.
Remote Control ........................................................ 7
3-1-2-1. Function................................................................. 7
3-1-2-2. Setup Items ............................................................ 7
3-2. SDAP Protocol................................................................... 8
3-3. SDCP Protocol ................................................................... 9
3-3-1.
Format ...................................................................... 9
3-3-1-1. Header ................................................................... 9
3-3-1-2. Community............................................................ 9
3-3-1-3. Command ............................................................ 10
3-3-1-4. SET Request ........................................................ 11
3-3-1-5. GET Request ....................................................... 11
3-3-1-6. ERROR Response ............................................... 11
3-3-2.
Items ....................................................................... 12
3-3-2-1. Model Dependent Category ................................ 12
3-3-2-2. Equipment Information Acquisition (80**h) ...... 12
3-3-2-3. Network Information Acquisition (90**h) ......... 13
3-3-3.
Error Code .............................................................. 14
3-3-3-1. Item Error ............................................................ 15
3-3-3-2. Community Error ................................................ 15
3-3-3-3. Request Error ...................................................... 16
3-3-3-4. Network Error ..................................................... 16
3-3-3-5. Comm Error ........................................................ 17
3-3-3-6. NVRAM Error .................................................... 17
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
This protocol manual describes the basic configuration and basic operations of various commands used
for projector. Projector can be controlled using the commands provided in “Appendix”. Using an external
CONTROLLER , etc., inputs can be switched and the power can also be turned on and off. In the follow-
ing paragraphs, “CONTROLLER” means an external device such as a PC which controls projector using
these commands.
2. RS-232C (VPL-CX75 and VPL-CX76 are excluded.)
2-1. Communication Specifications
<RS-232C Communication Signal>
. Full duplex communication channels (Flow control not performed.)
. Start-stop synchronism system
. Baud rate: 38.4 kbps (bits per second)
. The bit configuration is defined as follows.
1 START Bit + 8 DATA Bits + 1 PARITY Bit + 1 STOP Bit
START
BIT
D0
D1
D2
D3
D4
D5
D6
D7
PARITY STOP
(LSB)
(MSB) (EVEN) BIT
EVEN Parity.....Total number of “1”s from D0 to D7 is an even number.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2. Command Block Format
The code from B0 to B7 as described below are transmitted.
Transmission from
the Master side
Reception in
the Master side
Reception in the Master side
(With Data)
B0
START CODE : 0 x A9
ACK / NAK
B1
B2
ITEM NUMBER
SET / GET
DATA
ITEM NUMBER
REPLY
ACK
B3
B4
B5
DUMMY DATA
DATA
B6
B7
CHECK SUM
END CODE : 0 x 9A
B0 START CORD
Common in the all FORMAT
B6 CHECK SUM
B1 to B5 are calculated by OR;
<Example of Calculation>
0 x A9
0 x A9
Answer
1010
1010
1010
1001
1001
1001
0 x A9
0 x 9A
Answer
1010
1001
1011
1001
1010
1011
0 x A9
0 x BB
B7 END CODE
Common in the all FORMAT
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2-3. Block Format
Transmission from the Master side
Data transmission to the Projector
Start of Command
B0
START CODE
ITEM NUMBER
B1
B2
Set the Data Category Value desired.
Refer to the Appendix B Table 1 for details.
SET: 0 x 00 (Set data)
GET: 0 x 01 (Get data)
SET / GET
DATA
B3
B4
B5
B6
B7
SET: Data to be set (Refer to the Appendix B Table 2)
GET: Unused. Set Dummy data [0 x 00, 0 x 00]
Check Sum
CHECK SUM
END CODE
End of Command
Receive results of the data transmission from the Projector.
Start of Command
Reception in the Master side
B0
B1
B2
START CODE
ACK / NAK
Results correspond with the data transmission
Refer to the Appendix B Table 3 for the data in detail.
[0 x 03]
B3
ACK
Express Reply data either of ACK, or NAK
B4
B5
B6
B7
This data does not mean any senses.
Dummy Data [0 x 00, 0 x 00] is stored.
DUMMY DATA
Check Sum
CHECK SUM
END CODE
End of Command
Receive data from the Projector
Start of Command
Reception in the Master side (With Data)
B0
B1
B2
START CODE
ITEM NUMBER
Data to acquire
Refer to the Appendix B Table 1 in detail.
[0 x 02]
B3
REPLY
DATA
Express data to be Reply data
B4
B5
B6
B7
Received data
Refer to the Appendix B Table 2 in detail.
Check Sum
CHECK SUM
END CODE
End of Command
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2-4. Connection
<RS-232C Connection>
Communication is enabled by the use of a D-Sub 9 Pin cross (reverse) cable.
The pin assignment of D-Sub 9 Pin and D-Sub 25 Pin is as follows.
D-Sub 9 Pin D-Sub 25 Pin
Name
Grounding for safety protection or cable shield
Transmission data
Shell = FG
1
2
FG
TxD
3
2
7
8
6
5
1
4
9
3
4
5
6
RxD Reception data
RTS Transmission request
CTS Transmission permission
DSR Data set ready
GND for signal
DCD Data channel signal carrier detection
DTR Data terminal ready
7
8
20
22
SG
RI
Calling display (Presence/absence of calling signal)
Pins indicated as D-Sub 25 Pin are not used.
Assured cable length: 15 m (However, assurance may not be applicable for some cables.)
The software for controlling the projector from a PC is intended for performing transmission and recep-
tion for only the TxD and RxD lines.
Therefore there is no handshake normally performed by RS-232C.
2-5. Communication Procedure
2-5-1. Outline of Communication
All communication between CONTROLLER (PC, etc.) and DEVICE (PROJECTOR) is performed by the
command block format. Communication is started by the issue of a command at CONTROLLER and
ended when the return Data is sent to CONTROLLER after DEVICE receives the command.
CONTROLLER is prohibited from sending several commands at one time. This means that after CON-
TROLLER sends one command, it cannot send other commands until DEVICE returns the return Data.
DEVICE sends the return Data after processing the command. The time from when CONTROLLER
sends the command until the return Data is returned differs according to the contents of the command.
n
When Sircs Direct Command is sent, return Data may not be returned in some cases.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2-6. Communication Rules
. When sending a command from CONTROLLER, the return Data from PROJECTOR should be
received first before sending the next command. Even if the next command is sent before receiving the
return Data, since PROJECTOR will not be able to receive that command, it does not return a response
to CONTROLLER. Consequently, no error code is also sent.
The following lists the approximate waiting times for PROJECTOR to return the return Data after
CONTROLLER sends the command.
. When a communication error occurs, PROJECTOR ignores the Data received until now, and set into
the reception standby state.
. For undefined commands or commends determined as invalid by PROJECTOR, PROJECTOR will
send the “NAK” return Data to CONTROLLER .
. Take note that when Data is written when the input signal of PROJECTOR is unstable, that Data
(value) will not be incorporated.
. When INDEX specified SIRCS direct command is transmitted, leave an interval of 45 msec until the
next transmission. (Do not return the return Data (ACK, NAK) when the SIRCS direct command is
received.)
2-7. Approximate Return Waiting Times
The await-return time is approx. 30 msec.
n
This is the case, unless the communications are interfered anyway.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
NETWORK
3-1. Introduction
This section describes the specifications, performance and operations of the network service that is going
to be installed in the target projector.
3-1-1. Advertisement
The advertisement service is provided to facilitate development of a PC application that can automatically
detect a projector on the network. This function is achieved by broadcasting the equipment information
periodically to the network.
3-1-1-1. Function
The equipment information shown below is transmitted as the broadcast packet periodically (at certain
intervals).
Information
Description
Category
Category of the equipment
Equipment name
Serial number
Installation information
Community
Name of the equipment
Serial number of the equipment
Installation location of the equipment
Community name of the equipment
Power status of the equipment
Power status
m
. The category of projector is 0x0a.
. The power status sets ffffh if communication error occurs.
Protocol
The SDAP protocol is defined in order to provide this service.
Item
Description
Protocol name
Transport
SDAP (Simple Display Advertisement Protocol)
UDP
Port number
BC interval
53862
Once every 30 seconds (initial value)
3-1-1-2. Setup Items
The items that can be set for the advertisement service are described below.
Setup items
Description
Port
Port number
Interval
Broadcast interval
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3-1-2. Remote Control
The remote control service is provided that can control the target equipment from remote location via
network. The SDCP protocol that serves to acquire the basic information such as equipment name and
serial numbers is installed in this projector.
3-1-2-1. Function
This responds to the control command and requests for acquiring the status and information supplied
from clients.
Control request
Enables the input to be selected and picture control to be adjusted.
SIRCS request
Enables remote control by sending the SIRCS code.
Status request
Enables equipment status information such as power status, error information and power-on time to be
acquired.
Information request
Enables equipment information such as equipment name, serial number and installation information to be
acquired.
Protocol
Item
Description
Protocol name
Transport
SDCP (Simple Display Control Protocol)
TCP
Port number
53484
TCP connection timeout
30 seconds
3-1-2-2. Setup Items
The items that can be set for the remote control service are described below.
Setup item
Description
Port
Port number
Timeout
TCP connection timeout time
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2. SDAP Protocol
This section describes the SDAP packet structure.
Power
Status
(2)
Header Community
Product name
(12)
Serial No.
(4)
Location
(24)
(4)
(4)
Fig.1 Packet structure
1) Header
The header consists of ID (16 bit), version (8 bit) and category (8 bits).
(Bit position)
0
1
2
3
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
“DA” (16)
Version (8)
Category (8)
Fig. 2 Header
ID
It is fixed to “DA”.
Version
This indicates the version number of protocol.
It is fixed to 01h (version 1).
Category
Category number 0x0a of the projector is entered here.
2) Community
The community that is set in the display equipment is entered. Community consists of four alphanu-
meric characters (case sensitive). The display equipment has the default value “SONY” when shipped
from the factory.
(Bit position)
0
1
2
3
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
Community (32)
Fig. 3 Community
3) Equipment Information
Product Name
Name of equipment (Maximum twelve characters)
In case, less than twelve characters, 00h is entered in the blank space.
Serial No.
Serial number is entered.
Power Status.
Power supply status of the equipment is entered.
Location
Information of installation location (Maximum twenty four characters)
In case, less than twenty four characters, 00h is entered in the blank space.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3. SDCP Protocol
This section describes the packet structure of SDCP.
Header Community
(2) (4)
Command
(4)
Data (n)
Fig. 1 Packet structure
3-3-1. Format
3-3-1-1. Header
The header consists of Version (8 bits) and Category (8 bits).
(Bit position)
0
1
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
Version (8)
Category (8)
Fig. 2 Header structure
Version
This indicates the version number of protocol.
It is fixed to 02h (version 2).
Category
Category number 0x0a of the projector is entered here. Projector checks the category number. If a
different category number is entered, the request is ignored.
3-3-1-2. Community
When the community Data matches the community that is set in the display equipment, the request is
executed. Community consists of four alphanumeric characters (case sensitive). All display equipment
has the default value “SONY” when shipped from the factory.
(Bit position)
0
1
2
3
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
Community (32)
n
Community should be entered with four characters. Three characters or less are not accepted.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3-1-3. Command
This section describes the format of the request command and the response command.
(Bit position)
0
1
2
3
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
Request/Response (8)
Item No (16)
Data Length (8)
(1) Request
This section describes the format of the request command that is issued from the host PC to the projector.
Community
This is the same alphanumeric characters as those of community that is set in the projector to which
request is going to be sent.
Request
There are only two types of request. One is the GET request to acquire the projector information and
status. The other is the SET request to modify the projector setup.
Request Contents
SET (00h) Used to control turning the power on/off and to control the input selector, and to change the various setups.
SET (01h) Used to acquire the installation information, equipment status and various setup values.
Item No.
This is the item number of the request target.
Data Length
This is the length of the Data accompanying the request. The maximum length is 128 bytes. If there is no
Data, it is 0.
Data
This is the Data accompanying the request.
(2) Response
This section describes the format of the response command which is used to return a response to the host
PC from the projector.
Community
The same alphanumeric characters as those of the request is entered.
Response
The response returns the result of executing the request from the host PC.
Response
Contents
NG (00h)
OK (01h)
Indicates that the request is illegal or cannot be executed.
Indicates that the request was executed correctly.
Item No.
The same value as those of the request is entered.
Data Length
This is the length of the Data accompanying the response. The maximum length is 128 bytes. If there is
no Data, it is 0.
Data
This is the Data accompanying the response.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3-1-4. SET Request
The SET request is used to set a new value in the specified item. Details of the request and the response
are described below.
Request
Data
Length
Data
Set Data (n byte)
Item No.
Item No.
Request
00h
n
Response
OK (01h)
Item No.
0
3-3-1-5. GET Request
The GET request is used to acquire the value of the specified item. Details of the request and the response
are described below.
Request
Data
Length
Item No.
Item No.
Request
01h
0
Response
OK (01h)
Item No.
n
Get Data (n byte)
3-3-1-6. ERROR Response
When an error occurs in the contents of a request or in the result of execution, NG is returned as the
response.
NG (00h)
Item No.
2
Error Code (16)
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3-2. Items
Category
Contents
SET
GET
O
00**h
01**h
03**h
17**h
19**h
80**h
90**h
Used to control and to change the various setups.
Used to acquire the status.
O
O
Used to reset memory.
O
O
O
Sircs (15 bit category)
Sircs (20 bit category)
Used to acquire equipment information.
Used to acquire network setup information.
O
O
3-3-2-1. Model Dependent Category
The supported contents of 00**h, 01**h, 03**h, 17**h and 19**h change depending on the model.
Details are shown on Appendix.
3-3-2-2. Equipment Information Acquisition (80**h)
Used to acquire the equipment information.
Lower byte
Contents
SET
GET
00h
01h
02h
03h
Category Code
Model name
O
O
O
O
Serial number
Installation location
O
0x8000 Category code
1 byte
0x8001 Model name
Alphanumeric 12 characters
If the number of characters is less than 12, the remaining digits are filled with 00h.
0x8002 Serial number
4 bytes
n
The serial number is in the range of 00000000 to 99999999.
0x8003 Installation location
Alphanumeric 24 characters
If the number of characters is less than 24, the remaining digits are filled with 00h.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3-2-3. Network Information Acquisition (90**h)
Used to acquire the network setup information.
Lower bytes
Contents
SET
GET
00h
01h
02h
03h
04h
MAC Address
IP Address
O
O
O
O
O
Subnet Mask
Default Gateway
DHCP
0x9000 Mac Address
6 bytes
0x9001 IP Address
4 bytes
0x9002 Subnet Mask
4 bytes
0x9003 Default Mask
4 bytes
0x9004 DHCP
1 byte
DHCP invalid : 0
DHCP valid : 1
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3-3. Error Code
The error code list is shown below with a detailed description of each.
Category
Error
Error Code
Item Error (01**h)
Invalid Item
01h
02h
03h
04h
11h
80h
01h
01h
02h
03h
11h
12h
13h
01h
01h
10h
20h
30h
40h
50h
F0h
10h
20h
Invalid Item Request
Invalid Length
Invalid Data
Short Data
Not Applicable Item
Different Community
Invalid Version
Invalid Category
Invalid Request
Short Header
Short Community
Short Command
Timeout
Community Error (02**h)
Request Error (10**h)
Network Error (20**h)
Comm Error (F0**h)
Timeout
Check Sum Error
Framing Error
Parity Error
Over Run Error
Other Comm Error
Unknown Response
Read Error
NVRAM Error (F1**h)
Write Error
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3-3-1. Item Error
This error occurs when the Item No. of a request is illegal or its Data is illegal. The conditions for occur-
rence of the respective errors are shown below.
Invalid Item
An unsupported Item No. is specified.
Example 1: The unsupported category 0xA** is specified.
Example 2: The unsupported Item No. 0x8010 is specified.
Invalid Item Request
The Item No. is supported but an unsupported Request is issued.
Example: An attempt is made to set Data in the Model Name (0x8001).
Invalid Length
Data Length of the specified Item No. is too long.
Example: An attempt is made to set 25 byte Data in the installation location (0x8003).
Invalid Data
Data of the specified Item No. is outside the setting range.
Example: An attempt is made to set 101 in the Item when the setting range of the Item is 1 to 100.
Short Data
The length of Data is shorter than the value specified by the Data Length.
Example: The actual Data length is 9 bytes but Data Length is 10.
Not Applicable Item
An item that is not valid at present is specified.
Example: The item to switch the display is specified when the main power is off.
3-3-3-2. Community Error
This error occurs when community is different.
Example: “ABCD” is specified when “SONY” is set.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3-3-3. Request Error
This error occurs when Header or Command is illegal. The conditions of occurrence of the respective
errors are shown below.
Invalid Version
The version of the Header is other than 2.
n
When another version is supported, an error occurs in all versions other than the supported version.
Invalid Category
The category does not match.
Example: 0x0B is specified in the device of Category = 0x0A.
Invalid Request
An unsupported request is specified.
Example: Request = 0x02 is specified.
Short Header
The received Data is 1 byte.
Short Community
The received Data is in the range of 2 to 5 bytes.
Short Command
The received Data is in the range of 6 to 9 bytes.
3-3-3-4. Network Error
This is an error that occurs in TCP/IP. The conditions of occurrence of the respective errors are shown
below.
Timeout
Communication was interrupted.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3-3-5. Comm Error
This is an error in communication with the main control microprocessor of the display.
Timeout
Reception Data is not returned after Data is sent.
Check Sum Error
A check sum error occurred in the main control microprocessor of the display.
Framing Error
A framing error occurred.
Parity Error
A parity error occurred.
Over Run Error
An overrun error occurred.
Other Comm Error
Another error occurred.
Unknown Response
The Data cannot be processed was received.
3-3-3-6. NVRAM Error
Read Error
Reading from NVRAM was failed.
Write Error
Writing to NVRAM was failed.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A.
Setup Method For VPL-PX35 and PX40
Establishing the network setup such as IP address can be implemented from the PC browser, and the
information such as installation location can be viewed on the PC browser.
A-1. Command
A-1-1. Setting
Enter the following command using the format shown below in a browser as URL, and then the simple
response is returned.
Format
IP address
Item
The IP address that is assigned to the network block
Name of the setup item
Value
Setting value
Response
The following HTML is returned that enables to confirm OK or NG simply.
<HTML>
<TITLE>
IP address
</TITLE>
<BODY>
< Equipment name: Serial number><BR><BR>
Result [Item = Value]
</BODY>
</HTML>
IP address
Equipment name
Serial number
Result
The IP address that is assigned to the network block
Name of the equipment in which setup is implemented
Serial number of the equipment in which setup is implemented
Result (OK or NG) is displayed.
Item
Name of the setup item
Value
Setting value
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
18
Download from Www.Somanuals.com. All Manuals Search And Download.
A-1-2. Display
Enter the following command using the format shown below in a browser as URL, and then value of the
setting item is displayed.
Format
IP address
Item
The IP address that is assigned to the network block
Name of the setup item
Response
The following HTML is returned.
<HTML>
<TITLE>
IP address
</TITLE>
<BODY>
< Equipment name: Serial number><BR><BR>
Result [Item = Value]
</BODY>
</HTML>
IP address
Equipment name
Serial number
Result
The IP address that is assigned to the network block
Name of the equipment that has acquired the setup value
Serial number of the equipment that has acquired the setup value
Result (OK or NG) is displayed.
Item
Name of the setup item
Value
Setting value
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
19
Download from Www.Somanuals.com. All Manuals Search And Download.
A-2. Setting Command
Each setting item is described below.
Equipment information
Item
Description
Default
location
Sets location of the equipment installation. (Maximum 24 alphanumeric characters)
Sets the equipment community. (Maximum 4 alphanumeric characters)
_
Community
SONY
n
Location and community do not support Japanese character.
Network setup
Item
Description
Default
dhcp
Specifies method of setting IP address.
No
ipaddr
subnet
gateway
restart
IP address
192.168.0.1
255.255.0.0
0.0.0.0
Subnet mask
Default gateway
Restarts the network block to make the network setup effective.
m
. When the network setup is changed, execute restart to make the setup effective.
. For the setup of dhcp, set 1 to make DHCP effective and set 0 to make DHCP ineffective.
Service setup
Item
Description
Default
ad_port
ad_interval
ad_ip
Port number of the Advertisement service
53862
Broadcast interval of the Advertisement service (in units of second)
IP address of the Advertisement service
30 (seconds)
0.0.0.0
rc_port
Port number of the Remote Control service
53484
rc_timeout
TCP connection timeout time of the Remote Control service (in units of second)
30 (seconds)
m
. When network setup is changed, executing restart is required to make the network setup effective.
. When ad_Interval value is set to 0, the advertisement service is stopped.
. The ad_Interval can be set to 0 or a value in the range of 10 to 65535.
. The rc_timeout can be set to a value in the range of 0 to 65535.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
(VPL-FX51)
<Table 1>
Item Number
Upper byte
<Table 2>
Data
Upper byte
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
Remarks
Set/Get
Item
Lower byte
01h
Data
Lower byte
00h
VIDEO
S VIDEO
01h
INPUT
00h
INPUT A
02h
INPUT B
03h
INPUT C
04h
CONTRAST
BRIGHTNESS
COLOR
00h
00h
00h
00h
00h
00h
10h
11h
12h
13h
14h
15h
Setting value (0 to 100)
Setting value (0 to 100)
Setting value (0 to 100)
Setting value (0 to 100)
Setting value (0 to 100)
Setting value (0 to 100)
LOW
00h to 64h
00h to 64h
00h to 64h
00h to 64h
00h to 64h
00h to 64h
00h
HUE
SHARPNESS
RGB ENHANCER
COL TEMP
00h
17h
HIGH
01h
OFF
00h
DDE
00h
18h
PROGRESSIVE
FILM
01h
02h
16 : 9
00h
ASPECT
00h
00h
00h
20h
21h
30h
4 : 3
01h
OFF
00h
SCAN CONV
ON
01h
OFF
00h
PICTURE MUTING
ON
01h
COMPUTER
COMPONENT
VIDEO GBR
00h
INPUT A
00h
00h
32h
40h
01h
02h
HIGH
00h
LAMP MODE
STANDARD
01h
GAIN RED
GAIN GREEN
GAIN BLUE
BIAS RED
00h
00h
00h
00h
00h
00h
80h
81h
82h
83h
84h
85h
Setting value (0 to 255)
Setting value (0 to 255)
Setting value (0 to 255)
Setting value (0 to 255)
Setting value (0 to 255)
Setting value (0 to 255)
NO ERROR
00h to FFh
00h to FFh
00h to FFh
00h to FFh
00h to FFh
00h to FFh
00h
BIAS GREEN
BIAS BLUE
Get only
LAMP ERROR
FAN ERROR
COVER ERROR
TEMP ERROR
D5V ERROR
POWER ERROR
WARNING ERROR
01h
02h
STATUS ERROR
01h
01h
04h
08h
10h
20h
40h
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
21
Download from Www.Somanuals.com. All Manuals Search And Download.
(VPL-FX51)
<Table 1>
Item Number
Upper byte
<Table 2>
Data
Upper byte
00h
Remarks
Get only
Item
Lower byte
Data
Lower byte
00h
STANBY
START UP
00h
01h
STARTUP LAMP
POWER ON
00h
02h
00h
03h
STATUS POWER
01h
02h
COOLING1
00h
04h
COOLING2
00h
05h
SAVING COOLING1
SAVING COOLING2
SAVING STABY
USER
00h
06h
00h
07h
00h
08h
00h
00h
CONTROL MODE SEL
01h
05h
SERVICE
00h
01h
LAMP TIMER
ROM VERSION
01h
01h
01h
13h
USE TIME
0000h-ffffh*1
1Dh
MAIN ROM VERSION
SC ROM VERSION
*2
SC ROM VERSION
Channel Memory Reset
Status Memory Reset
Set Memory Reset
W/B All Save
1Eh
*2
01h
Set only
02h
03h
03h
00h
00h
04h
W/B Low Save
05h
W/B High Save
06h
Sircs (15bit category)
Sircs (20bit category)
17h
19h
Refer to table 4
Refer to table 5
_
_
00h
00h
00h
00h
Set only*3
*1Example) In case the lamp timer indicates 1000H, return values are [03h] upper byte and [E8h] lower byte.
*2Example) In case the software version is 1.03, return values are [01h] upper byte and [03h] lower byte.
*3It is corresponded to single command only.
(VPL-FX51)
<Table 3>
Item Number
Data
Item
ACK
Data
Upper byte
00h
Lower byte
00h
_
Undefined Command
Size Error
01h
04h
Select Error
01h
F0h
05h
Range Over
06h
NAK
Not Applicable
Check Sum Error
Framing Error
Parity Error
0Ah
10h
20h
30h
Over Rub Error
Other Comm Error
40h
50h
Approximate Return Waiting Times
The await-return time is approx. 50 msec.
n
This is the case, unless the communications are interfered anyway.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
22
Download from Www.Somanuals.com. All Manuals Search And Download.
(VPL-FX52/FX52L)
<Table 1>
<Table 2>
Item Number
Upper byte
00h
Data
Upper byte
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
Remarks
Set/Get
Item
Lower byte
Data
Video
Lower byte
00h
Input
01h
S-Video
01h
Input-A
02h
Input-B
03h
Input-C
04h
Picture Mode
00h
02h
Dynamic
00h
Standard
01h
Contrast
Brightness
Color
00h
00h
00h
00h
00h
00h
00h
10h
11h
12h
13h
14h
15h
17h
Setting value (0-100)
Setting value (0-100)
Setting value (0-100)
Setting value (0-100)
Setting value (0-100)
Setting value (0-100)
High
00h to 64h
00h to 64h
00h to 64h
00h to 64h
00h to 64h
00h to 64h
00h
Hue
Sharpness
RGB Enhancer
ColTemp
Low
01h
DDE
00h
18h
Off
00h
Progressive
Film
01h
02h
Wide Mode
Scan Conv
00h
00h
00h
00h
20h
21h
30h
32h
Off
00h
On
01h
Off
00h
On
01h
Picture Muting
Input-C Signal Sel
Off
00h
On
01h
Computer
00h
Component
Video GBR
High
01h
02h
Lamp Mode
00h
40h
00h
Standard
01h
Gain Red
Gain Green
Gain Blue
Bias Red
00h
00h
00h
00h
00h
00h
80h
81h
82h
83h
84h
85h
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
00h to FFh
00h to FFh
00h to FFh
00h to FFh
00h to FFh
00h to FFh
Bias Green
Bias Blue
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
23
Download from Www.Somanuals.com. All Manuals Search And Download.
(VPL-FX52/FX52L)
<Table 1>
<Table 2>
Data
Upper byte Lower byte
Item Number
Upper byte
01h
Remarks
Get only
Item
Lower byte
01h
Data
No Error
Status Error
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
01h
02h
04h
08h
10h
20h
40h
00h
01h
02h
03h
04h
05h
06h
07h
08h
00h
01h
Lamp Error
Fan Error
Cover Error
Temp Error
D5V Error
Power Error
Warning Error
Stanby
Status Power
01h
02h
Start Up
Start Up Lamp
Power On
Cooling1
Cooling2
Saving Cooling1
Saving Cooling2
Saving Staby
User Mode
Service Mode
Lamp Use Time
MAIN ROM Version
SC ROM Version
Disable
Control Mode Select
01h
05h
Lamp Timer
ROM Version
01h
01h
01h
01h
13h
1Dh
1Eh
1Fh
0000h-FFFFh*1
*2
*2
SC ROM Version
Status Security*3
00h
00h
01h
00h
Enable
00h
00h
Channel Memory Reset
Status Memory Reset
Set Memory Reset
W/B All Save
03h
01h
_
Set only
02h
03h
04h
W/B High Save
05h
W/B Low Save
06h
Sircs (15 bit category)
Sircs (20 bit category)
17h
19h
Refer to table 6
Refer to table 7
_
_
00h
00h
00h
00h
Set only*4
*1 Example) In case the lamp timer indicates
1000H, return values are [03h] upper byte and
[E8h] lower byte.
*2 Example) In case the software version is 1.03,
return values are [01h] upper byte and [03h]
lower byte.
*3 While the set is security locked, after power
switch is turned on, you can check that pass
sword input screen is indicated or not.
During pass word input screen indicating, return
values are [00h] upper byte and [01h] lower
byte.
(VPL-FX52/FX52L)
<Table 3>
Item Number
Data
Item
ACK
NAK
Data
_
Upper byte
Lower byte
00h
00h
01h
Undefined Command
Size Error
01h
04h
Select Error
05h
*4 It is corresponded to single command only.
Range Over
06h
Not Applicable
Check Sum Error
Framing Error
Parity Error
0Ah
10h
F0h
20h
Approximate Return Waiting Times
The await-return time is approx. 50 msec.
n
This is the case, unless the communications are
interfered anyway.
30h
Over Rub Error
Other Comm Error
40h
50h
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
24
Download from Www.Somanuals.com. All Manuals Search And Download.
(VPL-PX35, PX40, PX41)
<Table 1>
<Table 2>
Item Number
Upper byte
00h
Data
Upper byte
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
Remarks
Set/Get
Item
Lower byte
01h
Data
Lower byte
00h
Input
Video
S-Video
01h
Input-A
02h
Input-B
03h
Input-C
04h
Input-D
05h
Picture Mode
00h
02h
Dynamic
00h
Standard
01h
Contrast
Brightness
Color
00h
00h
00h
00h
00h
00h
00h
00h
10h
11h
12h
13h
14h
15h
16h
17h
Setting value (0-100)
00h to 64h
00h to 64h
00h to 64h
00h to 64h
00h to 64h
00h to 64h
00h to 64h
00h
Setting value (0-100)
Setting value (0-100)
Hue
Setting value (0-100)
Sharpness
RGB Enhancer
Volume
Setting value (0-100)
Setting value (0-100)
Setting value (0-100)
ColTemp
High
Low
01h
DDE
00h
18h
Off
00h
Progressive
01h
Film
02h
Wide Mode
Scan Conv
00h
00h
00h
00h
00h
20h
21h
30h
31h
33h
Off
00h
On
01h
Off
On
00h
01h
Picture Muting
Audio Muting
Input-D Signal Sel
Off
00h
On
01h
Off
00h
On
01h
Computer
00h
Component
Video GBR
High
01h
02h
Lamp Mode
00h
40h
00h
Standard
01h
GAIN RED
GAIN GREEN
GAIN BLUE
BIAS RED
00h
00h
00h
00h
00h
00h
80h
81h
82h
83h
84h
85h
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
00h to FFh
00h to FFh
00h to FFh
00h to FFh
00h to FFh
00h to FFh
BIAS GREEN
BIAS BLUE
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
25
Download from Www.Somanuals.com. All Manuals Search And Download.
(VPL-PX35, PX40, PX41)
<Table 1>
<Table 2>
Item Number
Upper byte
01h
Data
Remarks
Get only
Item
Lower byte
01h
Data
NO ERROR
Upper byte Lower byte
STATUS ERROR
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
01h
02h
04h
08h
10h
20h
40h
00h
01h
02h
03h
04h
05h
06h
07h
08h
00h
01h
LAMP ERROR
FAN ERROR
COVER ERROR
TEMP ERROR
D5V ERROR
POWER ERROR
WARNING ERROR
STANBY
STATUS POWER
01h
02h
START UP
STARTUP LAMP
POWER ON
COOLING1
COOLING2
SAVING COOLING1
SAVING COOLING2
SAVING STABY
USER MODE
SERVICE MODE
LAMP USE TIME
MAIN ROM VERSION
SC ROM VERSION
Disable
CONTROL MODE SEL
01h
05h
LAMP TIMER
ROM VERSION
01h
01h
01h
01h
13h
1Dh
1Eh
1Fh
0000h-ffffh*1
*2
SC ROM VERSION
STATUS SECURITY*3
*2
00h
00h
01h
00h
Enable
00h
00h
Channel Memory Reset
Status Memory Reset
Set Memory Reset
W/B All Save
03h
01h
_
Set only
02h
03h
04h
W/B High Save
05h
W/B Low Save
06h
Sircs (15 bit category)
Sircs (20 bit category)
17h
19h
Refer to table 8
Refer to table 9
_
_
00h
00h
00h
00h
Set only*4
*1 Example) In case the lamp timer indicates
1000H, return values are [03h] upper byte and
[E8h] lower byte.
*2 Example) In case the software version is 1.03,
return values are [01h] upper byte and [03h]
lower byte.
*3 While the set is security locked, after power
switch is turned on, you can check that pass
sword input screen is indicated or not.
During pass word input screen indicating, return
values are [00h] upper byte and [01h] lower
byte.
(VPL-PX35, PX40, PX41)
<Table 3>
Item Number
Data
Lower byte
00h
Item
ACK
NAK
Data
_
Upper byte
00h
01h
Undefined Command
Size Error
01h
04h
Select Error
05h
*4 It is corresponded to single command only.
Range Over
06h
Not Applicable
Check Sum Error
Framing Error
Parity Error
0Ah
F0h
10h
20h
Approximate Return Waiting Times
The await-return time is approx. 50 msec.
n
This is the case, unless the communications are
interfered anyway.
30h
Over Rub Error
Other Comm Error
40h
50h
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
26
Download from Www.Somanuals.com. All Manuals Search And Download.
(VPL-CX75, CX76)
<Table 1>
<Table 2>
Item Number
Upper byte
00h
Data
Upper byte
00h
Remarks
Set/Get
Item
Lower byte
Data
Lower byte
00h
Input
01h
Video
S-Video
00h
01h
Input-A
00h
02h
Input-B
00h
03h
Picture Mode
00h
02h
Dynamic
00h
00h
Standard
00h
01h
Contrast
Brightness
Color
00h
00h
00h
00h
00h
10h
11h
12h
13h
14h
Setting value (0 - 100)
00h
00h - 64h
00h - 64h
00h - 64h
00h - 64h
Setting value (0 - 100)
00h
Setting value (0 - 100)
00h
Hue
Setting value (0 - 100)
00h
Sharpness
High
00h
01h
02h
Middle
Low
Volume
00h
00h
16h
17h
Setting value (0 - 100)
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h - 64h
00h
ColTemp
High
Low
01h
Wide Mode
Scan Conv
00h
00h
00h
00h
00h
20h
21h
30h
31h
32h
Off
00h
On
01h
Off
On
00h
01h
PictureMuting
AudioMuting
Off
00h
On
01h
Off
00h
On
01h
Input-A Signal Sel
Computer
00h
Compornent
Video GBR
Memory Stick
Air Shot
01h
02h
Input-B Select
Lamp Mode
00h
00h
33h
40h
03h
04h
High
00h
Standard
01h
Gain Red
Gain Green
Gain Blue
Bias Red
00h
00h
00h
00h
00h
00h
80h
81h
82h
83h
84h
85h
Setting value (0 - 255)
Setting value (0 - 255)
Setting value (0 - 255)
Setting value (0 - 255)
Setting value (0 - 255)
Setting value (0 - 255)
00h - FFh
00h - FFh
00h - FFh
00h - FFh
00h - FFh
00h - FFh
Bias Green
Bias Blue
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
27
Download from Www.Somanuals.com. All Manuals Search And Download.
(VPL-CX75, CX76)
<Table 1>
<Table 2>
Item Number
Upper byte
01h
Data
Remarks
Get only
Item
Lower byte
01h
Data
No Error
Upper byte Lower byte
Status Error
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
01h
02h
04h
08h
10h
20h
40h
00h
01h
02h
03h
04h
05h
06h
07h
08h
00h
01h
Lamp Error
Fan Error
Cover Error
Temp Error
D5V Error
POWER ERROR
Warning Error
Stanby
Status Power
01h
02h
Start Up
Start Up Lamp
Power On
Cooling1
Cooling2
Saving Cooling1
Saving Cooling2
Saving Stanby
User Mode
Service Mode
Lamp Use Time
MAIN ROM Version
SC ROM Version
Disable
Control Mode Select
01h
05h
Lamp Timer
ROM Version
01h
01h
01h
01h
13h
1Dh
1Eh
1Fh
0000h-FFFFh *1
*2
SC ROM Version
Status Security
*2
00h
00h
00h
00h
01h
00h
Enable
Channel Memory Reset
Status Memory Reset
Set Memory Reset
W/B All Save
03h
01h
_
Set only
02h
03h
04h
W/B Low Save
05h
W/B High Save
06h
Sircs(15bit category)
Sircs(20bit category)
17h
19h
Refer to table 10
Refer to table 11
_
_
00h
00h
00h
00h
Set only*4
*1 Example) In case the lamp timer indicates 1000H,
return values are [03h] upper byte and [E8h] lower
byte.
(VPL-CX75, CX76)
<Table 3>
*2 Example) In case the software version is 1.03,
return values are [01h] upper byte and [03h] lower
byte.
*3 While the set is security locked, after power
switch is turned on, you can check that pass
sword input screen is indicated or not.
During pass word input screen indicating, return
values are [00h] upper byte and [01h] lower byte.
*4 It is corresponded to single command only.
Item Number
Data
Item
ACK
NAK
Data
_
Upper byte
Lower byte
00h
00h
01h
Undefined Command
Size Error
01h
04h
Select Error
05h
Range Over
06h
Not Applicable
Check Sum Error
Framing Error
Parity Error
0Ah
10h
F0h
20h
The await-return time of return value is approx. 50
msec.
n
This is the case, unless the communications are
interfered anyway.
30h
Over Rub Error
Other Comm Error
40h
50h
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
28
Download from Www.Somanuals.com. All Manuals Search And Download.
(VPL-CX85, CX86)
<Table 1>
<Table 2>
Item Number
Data
Upper byte
00h
Remarks
Set/Get
Item
Upper byte
Lower byte
Data
Lower byte
00h
Input
00h
01h
Video
S-Video
00h
01h
Input-A
00h
02h
Input-B
00h
03h
Input-C
00h
04h
Picture Mode
00h
02h
Dynamic
00h
00h
Standard
00h
01h
Contrast
Brightness
Color
00h
00h
00h
00h
00h
10h
11h
12h
13h
14h
Setting value (0-100)
00h
00h-64h
00h-64h
00h-64h
00h-64h
Setting value (0-100)
00h
Setting value (0-100)
00h
Hue
Setting value (0-100)
00h
Sharpness
High
00h
01h
02h
Middle
Low
Volume
00h
00h
16h
17h
Setting value (0-100)
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h-64h
00h
ColTemp
High
Low
01h
Wide Mode
Scan Conv
00h
00h
00h
00h
00h
20h
21h
30h
31h
32h
Off
00h
On
Off
01h
00h
On
01h
Picture Muting
Audio Muting
Input-A Signal Sel
Off
00h
On
01h
Off
00h
On
01h
Computer
00h
Compornent
Video GBR
Memory Stick
Air Shot
01h
02h
Input-C Select
Lamp Mode
00h
00h
33h
40h
03h
04h
High
00h
Standard
01h
Gain Red
Gain Green
Gain Blue
Bias Red
00h
00h
00h
00h
00h
00h
80h
81h
82h
83h
84h
85h
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
Setting value (0-255)
00h-FFh
00h-FFh
00h-FFh
00h-FFh
00h-FFh
00h-FFh
Bias Green
Bias Blue
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
29
Download from Www.Somanuals.com. All Manuals Search And Download.
(VPL-CX85, CX86)
<Table 1>
<Table 2>
Item Number
Data
Upper byte
00h
Remarks
Get only
Item
Upper byte
01h
Lower byte
01h
Data
No Error
Lower byte
00h
01h
02h
04h
08h
10h
20h
40h
00h
01h
02h
03h
04h
05h
06h
07h
08h
00h
01h
Status Error
Lamp Error
Fan Error
00h
00h
Cover Error
Temp Error
D5V Error
00h
00h
00h
Power Error
Warning Error
Stanby
00h
00h
Status Power
01h
02h
00h
Start Up
00h
Startup Lamp
Power On
00h
00h
Cooling1
00h
Cooling2
00h
Saving Cooling1
Saving Cooling2
Saving Stanby
User Mode
Service Mode
Lamp Use Time
MAIN ROM Version
SC ROM Version
Disable
00h
00h
00h
Control Mode Select
01h
05h
00h
00h
Lamp Timer
ROM Version
01h
01h
01h
01h
13h
1dh
1eh
1fh
0000h-FFFFh*1
*2
SC ROM Version
Status Security*3
*2
00h
00h
01h
00h
Enable
00h
Channel Memory Reset
Status Memory Reset
Set Memory Reset
W/B All Save
03h
01h
_
00h
Set only
02h
03h
04h
W/B High Save
05h
W/B Low Save
06h
Sircs (15 Bit Category)
Sircs (20 Bit Category)
17h
19h
Refer to table 12
Refer to table 13
_
_
00h
00h
00h
00h
Set only*4
*1 Example) In case the lamp timer indicates 1000H,
return values are [03h] upper byte and [E8h] lower
byte.
*2 Example) In case the software version is 1.03, return
values are [01h] upper byte and [03h] lower byte.
*3 While the set is security locked, after power switch
is turned on, you can check that pass sword input
screen is indicated or not.
(VPL-CX85, CX86)
<Table 3>
Item Number
Data
Item
ACK
NAK
Data
_
Upper byte
Lower byte
00h
00h
01h
During pass word input screen indicating, return
values are [00h] upper byte and [01h] lower byte.
*4 It is corresponded to single command only.
Undefined Command
Size Error
01h
04h
Select Error
05h
The await-return time of return value is approx. 50 msec.
m
. This is the case, unless the communications are
interfered anyway.
. If standby mode is set as “low”, the main part of a
projector will go into power-saving mode in about 1
minute after standby.
Range Over
06h
Not Applicable
Check Sum Error
Framing Error
Parity Error
0Ah
10h
F0h
20h
30h
A command is executed by resending, although “Not
Applicable” will return, if a command is sent into power-
saving mode.
Over Rub Error
Other Comm Error
40h
50h
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
30
Download from Www.Somanuals.com. All Manuals Search And Download.
List of SIRCS CODE
(1) 15BIT Category (VPL-FX51 only)
<Table 4>
x0
x1
x2
x3
x4
x5
x6
x7
x8
x9
xA
xB
xC
xD
xE
xF
0x
1x
2x
3x
4x
5x
BRITNESS
+
BRIGHT
CONTRAST CONTRAST
COLOR
+
HIGH
COLOR
_
LOW
BRITNESS
_
DARK
POWER
ON/OF
+
HIGH
_
LOW
HUE
+
HUE
_
SHARPNESS SHARPNESS
PICTURE
MUTING
STATUS
ON
STATUS
OFF
POWER
ON
POWER
OFF
MENU
VIDEO
INPUT A
INPUT B
+
_
SOFT
PURPLISH GREENISH
SHARP
CURSOR
CURSOR
CURSOR
CURSOR
→
←
↑
↓
ADJ R
ADJ G
ADJ B
RGB SIZE RGB SHIFT
W/B
W/B
INPUT
BLANKING
SELECT
ENTER
MEMORY
S VIDEO
INPUT C
GAIN
BIAS
6x
7x
LENS
LENS
FOCUS F
FOCUS N
ZOOM L
ZOOM S
RESET
PATTERN
SHIFT ↑
SHIFT ↓
Download from Www.Somanuals.com. All Manuals Search And Download.
(2) 20BIT Category (VPL-FX51 only)
<Table 5>
x0
x1
x2
x3
x4
x5
x6
x7
x8
x9
xA
xB
xC
xD
xE
xF
0x
1x
2x
3x
4x
5x
KEYSTONE
DOT
PHASE
LENS
ZOOM
LENS
SHIFT
LENS
FOCUS
DIGITAL DIGITAL
ZOOM + ZOOM –
6x
7x
APA
FREEZE
LENS
TOGGLE
Download from Www.Somanuals.com. All Manuals Search And Download.
(3) 15BIT Category (VPL-FX52/FX52L)
<Table 6>
x0
x1
x2
x3
x4
x5
x6
x7
x8
x9
xA
xB
xC
xD
xE
xF
0x
1x
2x
3x
4x
5x
BRITNESS
+
BRIGHT
CONTRAST CONTRAST
COLOR
+
HIGH
COLOR
_
LOW
BRITNESS
_
DARK
POWER
ON/OF
+
HIGH
_
LOW
HUE
+
HUE
_
SHARPNESS SHARPNESS
PICTURE
MUTING
STATUS
ON
STATUS
OFF
POWER
ON
POWER
OFF
MENU
VIDEO
INPUT A
INPUT B
+
_
SOFT
PURPLISH GREENISH
SHARP
CURSOR
CURSOR
CURSOR
CURSOR
→
←
↑
↓
ADJ R
ADJ G
ADJ B
RGB SIZE RGB SHIFT
W/B
W/B
INPUT
SELECT
ENTER
MEMORY
S VIDEO
INPUT C
GAIN
BIAS
6x
7x
LENS
LENS
FOCUS F
FOCUS N
ZOOM L
ZOOM S
RESET
SHIFT ↑
SHIFT ↓
Download from Www.Somanuals.com. All Manuals Search And Download.
(4) 20BIT Category (VPL-FX52/FX52L)
<Table 7>
x0
x1
x2
x3
x4
x5
x6
x7
x8
x9
xA
xB
xC
xD
xE
xF
0x
1x
2x
3x
4x
5x
V
KEYSTONE
DDE
TOGGLE
DOT
PHASE
LENS
ZOOM
LENS
SHIFT
LENS
FOCUS
DIGITAL DIGITAL
ZOOM + ZOOM –
6x
7x
APA
FREEZE
LENS
TOGGLE
Download from Www.Somanuals.com. All Manuals Search And Download.
(5) 15BIT Category (VPL-PX35, PX40, PX41)
<Table 8>
x0
x1
x2
x3
x4
x5
x6
x7
x8
x9
xA
xB
xC
xD
xE
xF
0x
1x
2x
3x
4x
5x
BRITNESS
+
CONTRAST CONTRAST
COLOR
+
COLOR
_
BRITNESS
_
VOLUME+ VOLUME-
UP DOWN
AUDIO
MUTING
POWER
ON/OF
+
HIGH
_
LOW
BRIGHT
HIGH
LOW
DARK
HUE
+
HUE
_
SHARPNESS SHARPNESS
PICTURE
MUTING
STATUS
ON
STATUS
OFF
POWER
ON
POWER
OFF
MENU
VIDEO
INPUT A
INPUT B
+
_
SOFT
PURPLISH GREENISH
SHARP
CURSOR
CURSOR
CURSOR
CURSOR
→
←
↑
↓
ADJ R
ADJ G
ADJ B
RGB SIZE RGB SHIFT
W/B
W/B
INPUT
SELECT
ENTER
MEMORY
S VIDEO
INPUT C
GAIN
BIAS
6x
7x
INPUT D
RESET
Download from Www.Somanuals.com. All Manuals Search And Download.
(6) 20BIT Category (VPL-PX35, PX40, PX41)
<Table 9>
x0
x1
x2
x3
x4
x5
x6
x7
x8
x9
xA
xB
xC
xD
xE
xF
0x
1x
2x
3x
4x
5x
6x
7x
V
KEYSTONE
DDE
TOGGLE
DOT
PHASE
DIGITAL DIGITAL
ZOOM + ZOOM –
APA
FREEZE
LENS
CONT
TOGGLE
Download from Www.Somanuals.com. All Manuals Search And Download.
(7) 15BIT Category (VPL-CX75, CX76)
<Table 10>
x0
x1
x2
x3
x4
x5
x6
x7
x8
x9
xA
xB
xC
xD
xE
xF
0x
VOLUME VOLUME
POWER
ON/OF
*1
CONTRAST CONTRAST
COLOR
+
HIGH
COLOR
_
LOW
BRITNESS BRITNESS
AUDIO
MUTING
1x
2x
+
_
+
HIGH
_
LOW
+
_
DARK
UP
DOWN
BRIGHT
HUE
+
HUE
_
POWER
ON
*1
PICTURE
MUTING
STATUS
ON
STATUS
OFF
POWER
OFF
MENU
VIDEO
INPUT A
INPUT B
PURPLISH GREENISH
CURSOR
CURSOR
CURSOR
CURSOR
3x
4x
5x
6x
→
←
↑
↓
ADJ R
ADJ G
ADJ B
RGB SIZE RGB SHIFT
W/B
GAIN
W/B
BIAS
INPUT
SELECT
ENTER
MEMORY
S VIDEO
LENS
FOCUS F
LENS
FOCUS N
AUTO
FOCUS
LENS
ZOOM L
LENS
ZOOM S
7x
RESET
Download from Www.Somanuals.com. All Manuals Search And Download.
(8) 20BIT Category (VPL-CX75, CX76)
<Table 11>
x0
x1
x2
x3
x4
x5
x6
x7
x8
x9
xA
xB
xC
xD
xE
xF
0x
1x
2x
3x
4x
5x
6x
7x
TILT/
KEYSTONE/
SIDE SHOT
H
H
MS
PLAY
AIR
SHOT
KEYSTONE KEYSTONE
+
_
DOT
PHASE
LENS
ZOOM
LENS
FOCUS
DIGITAL DIGITAL
ZOOM + ZOOM –
APA
FREEZE
LENS
CONT
TOGGLE
Download from Www.Somanuals.com. All Manuals Search And Download.
(9) 15BIT Category (VPL-CX85, CX86)
<Table 12>
x0
x1
x2
x3
x4
x5
x6
x7
x8
x9
xA
xB
xC
xD
xE
xF
0x
VOLUME VOLUME
POWER
ON/OF
*1
CONTRAST CONTRAST
COLOR
+
HIGH
COLOR
_
LOW
BRITNESS BRITNESS
AUDIO
MUTING
1x
2x
+
_
+
HIGH
_
LOW
+
_
DARK
UP
DOWN
BRIGHT
HUE
+
HUE
_
POWER
ON
*1
PICTURE
MUTING
STATUS
ON
STATUS
OFF
POWER
OFF
MENU
VIDEO
INPUT A
INPUT B
PURPLISH GREENISH
CURSOR
CURSOR
CURSOR
CURSOR
3x
4x
5x
6x
→
←
↑
↓
ADJ R
ADJ G
ADJ B
RGB SIZE RGB SHIFT
W/B
GAIN
W/B
BIAS
INPUT
SELECT
ENTER
MEMORY
S VIDEO
INPUT C
LENS
FOCUS F
LENS
FOCUS N
LENS
ZOOM L
LENS
ZOOM S
7x
RESET
*1 If standby mode is set as “low”, the main part of a projector will go into power-saving mode in about 1 minute after standby.
A command is executed by resending, although “Not Applicable” will return, if a command is sent into power-saving mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
(10)20BIT Category (VPL-CX85, CX86)
<Table 13>
x0
x1
x2
x3
x4
x5
x6
x7
x8
x9
xA
xB
xC
xD
xE
xF
0x
1x
2x
3x
4x
5x
6x
7x
TILT/
KEYSTONE/
SIDE SHOT
H
H
MS
PLAY
AIR
SHOT
KEYSTONE KEYSTONE
+
_
DOT
PHASE
LENS
ZOOM
LENS
FOCUS
DIGITAL DIGITAL
ZOOM + ZOOM –
APA
FREEZE
LENS
CONT
TOGGLE
Download from Www.Somanuals.com. All Manuals Search And Download.
The material contained in this manual consists of
information that is the property of Sony Corporation.
Sony Corporation expressly prohibits the duplication of
any portion of this manual or the use thereof for any
purpose other than the operation or maintenance of the
equipment described in this manual without the express
written permission of Sony Corporation.
Le matériel contenu dans ce manuel consiste en
informations qui sont la propriété de Sony Corporation.
Sony Corporation interdit formellement la copie de
quelque partie que ce soit de ce manuel ou son emploi
pour tout autre but que des opérations ou entretiens de
l’équipement à moins d’une permission écrite de Sony
Corporation.
Das in dieser Anleitung enthaltene Material besteht aus
Informationen, die Eigentum der Sony Corporation sind.
Die Sony Corporation untersagt ausdrücklich die
Vervielfältigung jeglicher Teile dieser Anleitung oder den
Gebrauch derselben für irgendeinen anderen Zweck als
die Bedienung oder Wartung der in dieser Anleitung
beschriebenen
Ausrüstung
ohne
ausdrückliche
schriftliche Erlaubnis der Sony Corporation.
VPL-CX75/CX76/CX85/CX86/FX51/FX52/FX52L/PX35/PX40/PX41
Download from Www.Somanuals.com. All Manuals Search And Download.
VPL-CX75 (SY)
VPL-CX76 (SY)
VPL-CX85 (SY)
VPL-CX86 (SY)
VPL-FX51 (SY)
VPL-FX52 (SY)
VPL-FX52L (SY)
VPL-PX35 (SY)
VPL-PX40 (SY)
VPL-PX41 (SY) E
9-870-346-68
English
2005KR16-1
©2002
Sony EMCS Corporation
Ichinomiya Tec
Download from Www.Somanuals.com. All Manuals Search And Download.
|