Sharp Clock Radio MD X5 User Manual

MD/CD STEREO

MODEL

MD-X5

OPERATION MANUAL

Thank you for purchasing this SHARP product.

MD-X5 MD/CD stereo consisting of

To obtain the best performance from this product

please read this manual carefully. It will guide you in

operating your SHARP product.

MD-X5 MD/CD stereo

CP-X5 2 way speaker system.

CONTENTS

A0004

Page

RECORDING ............................................................................. 17 - 19

EDITING .................................................................................... 20 - 26

ENTERING CHARACTERS ...................................................... 27 - 28

HOW TO USE THE BUILT-IN TIMER ....................................... 29 - 32

USING EXTERNAL UNITS ....................................................... 33 - 36

WHAT IS A MINIDISC? .................................................................... 37

MINIDISC SYSTEM LIMITATIONS .................................................. 38

TROUBLESHOOTING .............................................................. 38 - 40

MAINTENANCE ............................................................................... 41

SPECIFICATIONS ............................................................................ 41

CALLING FOR SERVICE .................................................. Back cover

LIMITED WARRANTY....................................................... Back cover

IMPORTANT SAFEGUARDS ............................................................ 1

SPECIAL NOTES .......................................................................... 1 - 2

PRECAUTIONS .................................................................................. 2

NAMES OF CONTROLS AND INDICATORS ............................... 3 - 4

PREPARATION FOR USE ............................................................ 5 - 6

SOUND CONTROL ............................................................................ 7

SETTING THE CLOCK ...................................................................... 8

COMPACT DISC OPERATION .......................................................... 9

MINIDISC OPERATION ................................................................... 10

RADIO OPERATION ................................................................. 11 - 12

CD AND MD OPERATIONS ...................................................... 13 - 15

BASIC INFORMATION ON MINIDISCS .......................................... 16

ACCESSORIES

"AA" size battery

(UM/SUM-3, R6, HP-7

or similar) x 2

FM/AM loop antenna x 1

[QANTL0004AWZZ]

Remote control x 1

[RRMCG0110AWSA]

[UBATU0001AWZZ]

A0006

Note:

Parts and accessories mentioned in this operation manual other than

those detailed above are not included.

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

Caution - use of controls or adjustments or

performance of procedures other than those

specifiedhereinmayresultinhazardousradiation

WARNING:TOREDUCETHERISKOFFIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE

THISAPPLIANCETORAINORMOISTURE.

exposure.

Note:

WARNING

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

FCC Regulations state that any unauthorized changes or modifications to

this equipment not expressly approved by the manufacturer could void the

user’s authority to operate this equipment.

This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

SPECIAL NOTES FOR FCC COMPOSITE DEVICE:

This device is a composite system. The digital device component may not

cause harmful interference.

I It is the intent of Sharp that this product be used in full compliance with

the copyright laws of the United States and that prior permission be

obtined from copyright owners whenever necessary.

I Reorient or relocate the receiving antenna.

I Increase the separation between the equipment and receiver.

USandforeignpatentslicensedfromDolbyLaboratoriesLicensingCorpo-

ration.

I Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

I Consult the dealer or an experienced radio/TV technician for help.

0001

PRECAUTIONS

0002

H General

H Condensation

Sudden temperature changes and storage or operation in an extremely

humid environment may cause condensation inside the cabinet.

Condensation can cause the unit to malfunction.

I Do not use oil, solvents, gasoline, paint thinner or insecticides on

the unit.

I Do not expose the unit to moisture, to temperatures higher than

Follow the procedure below to eliminate condensation.

140°F (60°C) or to extreme low temperatures.

I Keep the unit away from direct sunlight, strong magnetic fields,

excessivedust,humidityandelectronic/electricalequipment(home

computers, facsimiles, etc.) which generates electrical noise.

I CD and MD pickups

Leavethepoweronwithnodiscintheunituntilnormalplaybackispossible

(about 1 hour).

I Hold the AC power plug by the head when removing it from the AC

outlet, since pulling the cord can damage internal wires.

I Use the unit on a firm, level surface free from vibration.

I Remote control

I If the unit does not work properly while in use, press the POWER

buttontoturnthepoweroff,thendisconnecttheACpowercordfrom

the AC outlet. Plug the AC power cord back in, and then press the

POWER button to turn the power on.

Wipe off any condensation on the transmitter LED with a soft cloth before

operating the unit.

H Care of compact discs

I If an electrical storm is taking place near you, it is suggested that

you disconnect the AC power cord from the AC outlet for safety.

Compact discs are fairly resistant to damage, however mistracking can

occur due to an accumulation of dirt on the disc surface.

Follow the guidelines below for maximum enjoyment from your CD collec-

tion and player.

I Beforemovingtheunit,besuretoremoveallCDsandMDsfromthe

unit. Then, turn the power off and unplug the AC power cord.

If you move the unit with CDs or MDs left in it, they may jam inside

the unit, leading to damage.

I Do not write on either side of the disc, particularly the non-label side.

Signals are read from the non-label side. Do not mark on this surface.

Warning:

I Keep your discs away from direct sunlight, heat, and excessive mois-

Thevoltageusedmustbethesameasthatspecifiedonthisunit. Using

this product with a higher voltage than that which is specified is

dangerous and may result in a fire or other type of accident causing

damage. SHARP will not be held responsible for any damage resulting

from use of this unit with a voltage other than that which is specified.

ture.

I Always hold CDs by the edges. Fingerprints, dirt, or water on the CDs

cancausenoiseormistracking. IfaCDisdirtyordoesnotplayproperly,

clean it with a soft, dry cloth, wiping straight out from the center, along

the radius.

H Volume control

The sound level at a given volume setting depends on a combination

of speaker efficiency, location and many other factors.

It is advisable to avoid exposure to high volume levels, which occur

whileturningtheunitonwiththevolumecontrolsettinguphigh,orwhile

continually listening at high volumes.

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

NAMES OF CONTROLS AND INDICATORS

I Display window

1. Level Meter/Character Information Display

2. Disc Name Indicator: DISC

3. Track Name Indicator: TRACK

4. FM Stereo Mode Indicator: STEREO

5. Date Indicator: DATE

2 345 6 7 89

6. FM Stereo Indicator: ST

7. Program Indicator: PRGM

8. Random Play Indicator: RANDOM

9. Recording Level Indicator

10. MD Pause Indicator: 6

11. MD Record Indicator: REC

12. Recording Level Too High Indicator

13. Repeat Indicator: R

14. Sleep Indicator: SLEEP

15. More Tracks Indicator: >

16. Music Schedule Indicators

17. MD TOC Indicator: TOC

16 17 18192021 22 23 24

18. Recording Mode Indicator: MONO LP

19. Sound Synchro Indicator: S. SYNC

20. Clock Indicator: CLOCK

21. Remaining Time Indicator: REMAIN

22. Auto Mark Indicator: AUTO MARK

23. Total Time Indicator: TOTAL

24. Timer/Timer Record Indicator

I Front panel

25. MD Slot

26. Power Button: POWER

27. Recording Mode Button: REC MODE

28. CD Track Select Button: TRACK

29. CD 0MD Edit Button

MD/CD STEREO MD-X5

REC

30. Volume Up/Down Buttons:

31. 5 / 4 .-/+ Buttons

32. Tuner Call (Band Select) Button: TUNER(BAND)

33. Auxiliary Select Button: AUX

34. Extra Bass Button: X-BASS

35. Keyboard Input Terminal

36. MD Eject Button: 7

37. MD Record Button: I REC

38. MD Play/Pause Button: 06

39. MD Stop Button: H

POWER

EDIT

REC MODE

TRACK

CD MD

REMOTE

SENSOR

SAMPLING RATE CONVERTER

40. Remote Sensor

41. Pre-program Equalizer Button: PRE-EQ

42. CD Stop Button: H

43. CD Play/Pause Button: 06

44. CD Open/Close Button: 7

45. CD Tray

46. Headphones Jack: PHONES

47. Input Level Control: INPUT LEVEL

VOLUME

MD/CD/TUNER

PRE-EQ

X-BASS

TUNER(BAND) AUX

KEYBOARD INPUTLEVEL

PHONES

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

I Rear panel

1. AM Loop/FM Antenna Jack

Phono Input Jacks

ANTENNA

3. Auxiliary Analog Input Jacks

4. Auxiliary Analog Output Jacks

5. Auxiliary Digital Input Jack (Optical)

6. Auxiliary Digital Input Jack (Coaxial)

7. AC Power Cord

LOOP

PHONO

8. Reset Button

9. Speaker Terminals

RIGHT

LEFT

AUX ANALOG IN/OUT

AUX

RESET

AUX

OUT

RIGHT

LEFT

RATED SPEAKER

IMPEDANCE

;

OHMS MIN.

DIGITAL1

OPTICAL

LEFT

DIGITAL2

COAXIAL

RIGHT

AUX

DIGITAL

SPEAKERS

I Speaker section

1. Tweeter

2. Woofer

3. Speaker Cord

I Remote control

1. Tuning Up/Down Buttons: X/W

2. MD Track Up/Down, Cue/Review Buttons: 5 / 4

3. Tuner Preset/CD/MD Track Number Input Buttons

4. Program Button: PROGRAM

5. Clear Button: CLEAR

1 2

6. MD Record Button: I REC

7. Play Mode Button: P-MODE

10/0

PROGRAM

CLEAR

P-MODE

TIME

8. Time Display Select Button: TIME

9. Auxiliary Select Button: AUX

10. Cursor Buttons: CURSOR

11. Name/TOC Edit Button: NAME/TOC EDIT

12. Timer/Delete Button: TIMER/DELETE

13. Power Button: POWER

14. Extra Bass Button: X-BASS

15. FM Stereo Mode Button: ST-MODE

16. Tuner Call (Band Select) Button: TUNER/BAND

17. MD Stop Button: H

MD/CD/TUNER DIRECT KEY

-TUNER-

BAND

TUNING

ST-MODE

REC S.SYNC REC MODE A.MARK

-AUX-

NAME

TOC EDIT

<< CURSOR >>

DISPLAY

18. MD Play/Pause Button: 06

19. Sound Synchro Button: S. SYNC

20. Recording Mode Button: REC MODE

21. Auto Mark Button: A.MARK

22. CD Play/Pause Button: 06

23. CD Stop Button: H

24. CD Track Up/Down, Cue/Review Buttons: 5 / 4

25. Display Button: DISPLAY

26. ▲▼1 0Buttons

27. Message Button: MESSAGE

28. Enter Button: ENTER

ENTER

TIMER/

DELETE

MESSAGE

X-BASS PRO-EQ

VOLUME

POWER

REMOTE CONTROL

MD/CD STEREO

MD-X5

29. Volume Up/Down Buttons:

30. Pre-program Equalizer Button: PRE-EQ

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION FOR USE

Unplug the AC power cord from the AC outlet before connecting or

disconnecting any component.

AM loop antenna

H Antenna connection

Connect the antenna wire to the ANTENNA jack.

(1) FM antenna

PositiontheFMantennawireinthedirectionwherethestongestsignalcan

be received.

(1)

(2)

(2) AM loop antenna

ANTENNA

Position the AM loop antenna for optimum reception.

PlacetheAMloopantennaonashelf, etc., orattachittoastandorwallwith

screws (not supplied).

LOOP

FM aerial

Notes:

I Do not place the antenna on the unit. It may result in noise generation,

since the unit is equipped with digital electronics. Place the antenna

away from the unit for better reception.

I If the AM loop antenna and the FM antenna wire are placed near the AC

power cord, interference may result.

H Speaker connection

Right speaker

Left speaker

Connect each speaker wire to the SPEAKER terminals as shown.

Use speakers with an impedance of 6 ohms or more, as lower impedance

speakers can damage the unit.

Cautions:

I Connect the black wire to the minus (–) terminal, and the red wire to the

plus (+) terminal.

I Donotmixtherightchannelandleftchannelwiringwhenconnectingthe

speakers to the unit.

I Do not let bare speaker wires touch each other as this may damage the

RATED SPEAKER

IMPEDANCE

;

amplifier and/or speakers.

OHMS MIN.

Red

LEFT

Note:

Black

I The speaker grille is not removable.

RIGHT

SPEAKERS

Red

Left speaker

Right speaker

H Placing the system

I Be sure to keep space between the units for ventilation.

I Keep the back and sides of this unit at least 2" (5 cm) away from the

For the

left side

For the

right side

wall.

I If any kind of magnet or an electromagnet is placed too close to the TV

set and the system, irregular color may be seen.

TV set location

I Depending on the particular location of a TV set, color variations may

be seen on the TV screen. If this happens, move the system and its

speakers away from the TV and turn off the TV set. After 15 - 30

minutes, turn on the TV again.

TheTV'sowndemagnetisingfunctionshouldeliminatethevariations.

However, if the color still does not look right, move the system further

away from the TV set.

Note:

A cooling fan is built into this product to avoid heat buildup. When the

power is turned on, the cooling fan will run.

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Connecting the AC power cord

I After connecting the speakers, plug the AC power cord into a conven-

ient AC outlet.

I PlugtheACpowercordintoaconvenientACoutlet.Theletters"ENJOY

To an AC outlet

AC 120 V, 60 Hz

MUSIC!" will be scrolled across the display.

I Unplug the AC power cord from the AC outlet if the unit is not to be used

for a prolonged period of time.

H Loading the batteries for the remote control

I When inserting or removing the batteries, push them towardr the Ï

battery terminals.

I Installing the batteries incorrectly may cause the unit to malfunction.

Precautions for battery use:

I 2 "AA" size

batteries

(UM/SUM-3, R6,

HP-7 or similar)

I Insert the batteries according to the direction indicated in the battery

compartment.

I Replace all old batteries with new ones at the same time.

I Do not mix old and new batteries.

I Remove the batteries if they are weak or if the unit is not in use for long

periods to prevent potential damage due to battery leakage.

Caution:

Do not use rechargeable batteries (nickel-cadmium battery, etc.)

Notes concerning use:

I Replace the batteries if the control distance decreases or operation

becomes erratic.

I Periodically clean the transmitter LED on the remote control and the

sensor on the main unit with a soft cloth.

I Exposing the sensor on the main unit to strong light may interfere with

operation. Change the lighting or the direction of the unit.

I Keep the remote control away from moisture, excessive heat, shock,

and vibrations.

8" - 20'

(0.2m - 6m)

Remote sensor

H To change the brightness of the display

Turn the power on, and keep pressing the DISPLAY button for more than

two seconds.

The “DIMMER ON” display will appear, and the display will be dimmer.

To return to the original brightness, keep pressing the DISPLAY

button for more than two seconds.

The “DIMMER OFF” display will appear, and the original brightness is

retrieved.

DISPLAY

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND CONTROL

H Volume

Press the VOLUME button to increase the volume and the VOLUME

button to decrease the volume.

I The volume display can be changed within the range of "0" to "10".

VOLUME

Volume level

(0 to 10)

H Pre-programmed equalizer

When the PRE-EQ button is pressed, the current mode setting will be

displayed. To change to a different mode, press the PRE-EQ button

repeatedly.

FLAT: The sound is not modified.

HEAVY-2: Bass and treble are emphasized a lot.

HEAVY-1: Bass and treble are slightly emphasized.

VOCAL: Vocals (midrange tones) are emphasized.

SOFT-2: Treble is reduced a lot.

PRE-EQ

SOFT-1: Treble is cut a little.

H Extra bass (X-BASS)

Press the X-BASS button to emphasize the bass region of the frequency

spectrum.

"X-BASS ON" will appear.

Press the X-BASS button again to cancel the extra bass mode. "X-BASS

OFF" will appear.

X-BASS

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTING THE CLOCK

When you have set the date and time, this unit can be used as a clock. It

can be used for timer recording or for timer playback. It is also used to store

the MD recording date in memory.

1 Press the POWER button to turn the power on.

2 Press the TIMER/DELETE button.

ENTER

3 Within 10 seconds, press the ▲ or ▼ button to select "TIME ADJUST".

4 Within 10 seconds, press the ENTER button.

I The unit will enter the date setting mode.

POWER

TIMER/

DELETE

5 Adjust the month by pressing the 1 or 0 button.

6 Press the ENTER button to set the month.

7 Adjust the day by pressing the 1 or 0 button.

8 Press the ENTER button to set the date.

9 Adjust the year by pressing the 1 or 0 button.

I Press the button once to increase or decrease the year by one. Keep

pressing it to advance continuously.

I For a year after 2000, set "00" for 2000, "01" for 2001 and so on.

10 Press the ENTER button to set the year.

I The unit will enter the time setting mode.

11 Adjust the hour by pressing the 1 or 0 button.

I Press the button once to increase or decrease the hour by one. Keep

pressing it to advance continuously.

I On the display, midnight is shown as "12:00 AM" and noon is shown as

"12:00 PM". When setting the time, be careful not to confuse AM and

PM.

12 Press the ENTER button to set the hour.

13 Adjust the minute by pressing the 1 or 0 button.

I Press the button once to increase or decrease the minutes by one.

When the button is held down, the time will change in increments of 5

minutes.

14 Press the ENTER button to set the minute.

I The clock will start operating.

I When about 3 seconds have elapsed, the original display will reappear.

Notes:

I In the event of a power failure or when the AC power cord is discon-

nected, the clock display will go out.

When the AC power supply is restored, the clock display will flash on

and off to indicate the time when the power failure occurred or when the

AC power cord was disconnected.

I While recording an MD, you cannot set the date and clock. Be sure to

set the date and clock before recording.

I The range of dates that can be entered is from January 1, 1997 to

December 31, 2049.

To change the setting:

I Once you have set the date and time, "TIME ADJUST" will not be

displayed in step 3. Press the ▲ or ▼ button to make the date and time

appear.

I If you don't need to change the settings, just press the ENTER button.

To check the date and time:

Press the TIMER/DELETE button, and press the ▲ or ▼ button until the

date and time appear.

I When about 10 seconds have elapsed, the original display will reap-

pear.

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

COMPACT DISC OPERATION

H Loading and playing CDs

1 Press the CD H button.

I The power will be turned on automatically, and the unit will enter the CD

playback mode.

2 Press the 7 button to open the disc tray.

3 Place the CD on the disc tray, label side up.

I A CD can be placed on any open position on the disc tray.

I Be sure to place 3" (8 cm) CDs in the middle of the disc holder.

2, 4

Caution:

Do not stack CDs in the tray.

This can damage the player and the CDs.

4 Press the 7 button to close the disc tray.

I The total number of tracks and the total disc playing time will be

displayed.

I The music schedule will be displayed only for the number of tracks on

the disc.

I If the CD contains more than 21 tracks, “Y” will appear.

5 Press the CD 06 button.

I Playback will begin from track 1 on the disc you have specified.

When all the tracks on the CD have finished playing, the unit will stop

automatically.

To interrupt playback:

Press the CD 06 button.

Press the CD 06 button to resume playback from the same point.

To stop playback:

Press the CD H button.

To remove the CDs:

While in the stop mode, press the 7 button.

Total playing time

Total number of tracks

After use:

Press the POWER button to turn the power off.

Direct playback:

Music schedule

(More tracks indicator)

If a CD is loaded in the unit, pressing the CD 06 button turns the power

on and begins playback.

Cautions:

I Do not carry the unit with a disc left in the disc tray. The disc

may come loose inside the unit and be damaged or cause

damage to the unit. This may also cause malfunctions.

I Do not place two CDs in the disc tray.

I Do not push the disc tray while it is moving.

I If the power fails while the drawer is open, wait until the power is

restored before trying to close it.

I If the disc drawer is stopped forcibly, “ERROR” will appear on the

display and the unit will not function.

If this occurs, turn the power off, and turn it on again.

I If TV or radio interference occurs during CD operation, move the

unit away from the TV or radio.

I If the main unit is subjected to a sharp jolt or it is used where

vibrations are present, sound dropouts may occur. Use the unit in

a stable environment.

Ifthevolumeissettotoohigh,adropoutmayoccurduetovibrations

from the speakers. If this happens, move the main unit away from

the speakers or turn down the volume.

I DonotuseCDswithloosecellophanetapeorstickersorCDswhich

have glue left on the surface from tape or stickers. If such a CD is

inserted, you may not be able to remove the CD or the unit may

malfunction.

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

MINIDISC OPERATION

H Loading and playing MiniDiscs

1 Press the MD H button.

I The power will be turned on automatically, and the unit will enter the MD

playback mode.

2 Load a recorded MiniDisc in the direction indicated by the arrow on the

MiniDisc, with the labeled side facing up.

Arrow

I The total number of tracks and the total disc playing time will be

displayed.

I The music schedule will be displayed only for the number of tracks on

the disc.

I If the MD contains more than 21 tracks, “Y” will appear.

I If an untitled MD is inserted, no disc name will be displayed.

3 Press the MD 06 button.

I Playback will begin from track 1 on the disc you have specified.

I If the disc has track names, the track names will be scrolled across the

display.

I When the last track has been played back, this unit will stop automati-

cally.

To interrupt playback:

Press the MD 06 button.

Press the MD 06 button to resume playback from the same point.

To stop playback

Press the MD H button.

To remove a MiniDisc:

DISPLAY

Press the 7 button.

I The MiniDisc will be ejected.

Notes:

I Although vibration will not normally cause a MiniDisc to skip, you may

hear a skip in the sound if there is continuous vibration.

I When you listen to MiniDiscs near a radio or a TV set, the radio or the

Total number Total

of tracks playing time

TV set may pick up noise.

Disc name

Keep the unit as far away as possible from tuners.

After use:

Press the POWER button to turn the power off.

Note

I The power cannot be turned off while the unit is reading the information

on a MiniDisc.

Music schedule

(More tracks indicator)

Direct playback:

If a MiniDisc is loaded in the unit, pressing the MD 06 button turns the

power on, and begins playback.

Track name

To check a track name or the date of a recording during

playback:

Remaining recording time

Recording date

Press the DISPLAY button on the remote control during playback.

I Each time this button is pressed, the display will switch.

I Inthefollowingcases,discnames,tracknamesandrecordingdateswill

not be displayed:

• A MiniDisc that has not been given a disc name or track name

• A MiniDisc that does not have a recording date on it

Level meters

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO OPERATION

H Tuning

1 Press the TUNER (BAND) button.

I The power is turned on, and the tuner is selected.

2 Press the TUNER (BAND) button to select the desired frequency band

(FM or AM).

3 Tune in to the desired station using the TUNING X or W button.

Auto tuning:

When the TUNING X or W button is pressed for more than 0.5 seconds

andthenreleased,thetuningstopsatthefirstreceivablebroadcaststation.

1,2

Notes:

I When radio interference occurs during auto tuning, auto tuning may

stop automatically at that point.

I If a weak station signal is found during auto tuning, the station will be

skipped.

I To stop auto tuning, press the TUNING X or W button again.

4,5

1,2

Manual tuning:

Press the TUNING X or W button as many times as necessary to adjust

the frequency display to the frequency of the desired station.

4 ToreceiveFMstereo, presstheST-MODEbuttonontheremotecontrol

so that the "STEREO" indicator appears.

I “ST” will appear when an FM broadcast is in stereo.

5 If the FM stereo reception is weak, press the ST-MODE button so that

the “STEREO” indicator goes out.

I Although the reception changes to monaural, the sound becomes

clearer.

After use:

Press the POWER button to turn the power off.

Direct playback:

Frequency

FM stereo reception indicator

Just pressing the TUNER (BAND) button will turn on the power automati-

cally. The radio station you were listening to last will be tuned in.

Stereo mode indicator

Notes:

I The memory recalls the last station received even after changing the

TUNER (BAND) button or function selector buttons, or pressing the

POWER button to turn the power off.

If you are listening to the radio near personal computers, radios, or TV

sets, various noise or interference may be heard. Keep this unit as far

away as possible from these products.

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Preset tuning

You can store up to 40 stations in memory (40 stations consisting of any

combination of FM and AM stations you like) and recall them together with

their FM reception mode (stereo or mono), at the push of a button.

1 Perform steps 1 - 5 in the "Tuning" section.

2 Press the ENTER button.

3 Within 10 seconds, press the tuner preset number buttons.

4 Repeat steps 1 - 3 to set other preset stations, or to change a preset

station.

I When a new station is stored in a preset number location, the previous

contents of that location will be erased.

To select preset numbers 11 to 40.

Press the Y10 button first, then press the preset number.

For example to select 35:

Press the Y10 button.

Within 5 seconds, press the "3" button.

Within 5 seconds, press the "5" button.

Note:

I After a prolonged power failure, the contents of the memory will be lost.

When power is restored, enter your selections in memory again.(For

power failures of just a few hours or less, the contents of the memory

will not be lost.)

Location number for storing a station in memory

H To recall a preset station

1 Press the TUNER (BAND) button.

2 Press the tuner preset number button to recall the preset channel.

I The frequency will appear on the display.

Note:

I You can create names for radio stations that have been stored in

memory. (Page 27)

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CD AND MD OPERATIONS

H Direct-selection play

By using the track number input buttons on the remote control, any track

you wish to can be played directly, by entering its number.

1 Select the desired program source, CD or MD, by pressing the CD H or

MD H button.

2 Use the track number input buttons to select the desired track number.

A. To select track numbers 11 to 99

Press the >10 button first, then press the track number.

For example to select 28:

Press the >10 button.

Within 5 seconds, press the "2" button.

Within 5 seconds, press the "8" button.

B. To select track number 100 or higher (only for MD)

Press the >10 button twice, then press the track number.

For example to select 105:

Press the >10 button.

Track number

input buttons

Within 5 seconds, press the >10 button.

Within 5 seconds, press the "1" button.

Within 5 seconds, press the "10/0" button.

Within 5 seconds, press the "5" button.

The beginning of the selected track will be found, and play will begin

automatically.

Notes:

I A track number higher than the number of tracks on the disc cannot be

selected.

I During APMS play or random play, track number selection play is not

possible.

H Cue and review

H APSS (Auto Program Search System)

APSS automatically locates the beginning of any track.

1 Load a disc and begin playback.

2 Hold down the 4 button for audible fast forward, and hold down

To listen again to the track being played:

the 5 button for audible fast reverse.

Press the 5 button for less than 0.5 seconds during playback.

3 Normal playback will resume when the 4 or 5 button is

released.

To move to the beginning of the next track:

Notes:

Press the 4 button for less than 0.5 seconds during playback.

I If the end of the disc is reached while cueing, “DISC END” will

appear on the display, and operation will pause. Press the CD H

or MD H button to stop operation.

I To skip a number of tracks at one time, press the 5 or 4 button

repeatedly until the desired track number is shown.

When you want to listen to the disc again, press the 5 button to

locate the desired track. Normal playback will start from that point.

I Tostartplaybackfromadesiredtrack,pressthe 5or4buttonwhile

in the stop mode to select the track number, and then press the 06

button.

I When the beginning of the first track is reached, normal playback

will start.

To search very quickly

When fast forward or fast reverse is used while in the pause mode, the

playback point will move more quickly than when using audible fast

forward or audible fast reverse in the playback mode.

I In this mode, no sound is heard. Therefore, you must refer to the

time display.

I When you lift your finger, the unit will re-enter the pause mode.

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H APMS

(Automatic Programmable Music Selector)

1 Select the desired program source, CD or MD, by pressing the CD H or

1,5

MD H button.

2 Press the PROGRAM button.

I "PRGM" will flash.

CLEAR

3 Use the track number input buttons to designate the desired track

number.

1,5

4 Repeat step 3 for any other tracks. Up to 20 tracks for MD or 32 tracks

for CD can be programmed.

I The programmed playback order and the total playing time of the

programmed tracks will be automatically displayed, and only those

track numbers will appear in the music schedule.

I If the total playing time of the programmed tracks exceeds 199 minutes

59 seconds, “– –:– –” will be displayed. In this case, the programmed

tracks are stored.

5 Press the CD H or MD H button.

6 PresstheCD06orMD06buttontostartplaybackoftheprogrammed

selections.

I After all of the programmed tracks have finished playback, the unit will

automatically stop.

To add tracks to the APMS:

When a program has been entered ("PRGM" is flashing), perform step 3.

Additionaltrackscanbeselected, andtheywillbestoredafterthelasttrack

you entered.

To clear the programmed selections:

Press the CLEAR button while "PRGM" is flashing.

I Each time the button is pressed, one track will be cleared, beginning

Total playing time

with the last track programmed.

Selected track numbers

The last track number selected

To cancel the APMS:

While the unit is stopped in the APMS mode, press the CLEAR button.

I The program contents will be erased.

I When you open the disc tray or a MiniDisc is removed, the APMS mode

will be canceled.

To check which tracks are programmed:

While the unit is stopped in the APMS mode, press the 5 or 4 button.

Notes:

I It is not possible to insert an additional track between programmed

tracks that have already been entered.

I Programming and canceling are not possible during playback or in the

pause mode.

You can make program selections from CDs with the main

unit.

1 Press the CD H button.

2 Hold down the TRACK button for at least 2 seconds.

3 Press the 5 or 4 button to select the track you want to listen to.

4 Press the TRACK button.

5 Repeat steps 3 and 4 for any other tracks.

6 Press the CD H button.

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Random and repeat play

1 Select the desired program source, CD or MD, by pressing the CD H

or MD H button.

2 Press the P-MODE button.

I Each time this button is pressed, the mode will change in the following

order:

Repeat play → Random play → Normal play

3 Press the 06 button to start playback.

I Repeat play

Play will continue until it is stopped.

I Random play

Play will stop after all the tracks have been played once. (The same

track will not be played twice.)

Repeat play

To stop playback:

Press the CD H or MD H button.

To cancel repeat playback or random play:

Press the P-MODE button until the R or "RANDOM" display disappears.

Random play

To repeat playback of selected tracks:

Enter the program for the tracks you want and start repeat play.

You can program a single track and play it repeatedly.

Notes:

I During APMS play, random play is not possible.

I Repeat play will continue until you stop it. Therefore, do not forget to

cancel repeat play.

H Switching the time display

EachtimetheTIMEbuttonispressedduringplaybackorpause,thedisplay

will change as described below.

See the diagram to the left.

1 The elapsed play time for each track will be displayed.

2 The remaining play time for the current track will be displayed.

TIME

3 The total remaining play time for the disc from the point being played at

that time will be displayed.

Notes:

I During random play, the total remaining play time displayed for the disc

will be from the point being played at that time. The display cannot be

switched.

I Depending on a CD or MD to be played, the play time display may not

match the play time indicated on the CD or MD jacket, because the time

between the tracks is not included.

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC INFORMATION ON MINIDISCS

H Differences from tape recordings

H Note about making digital copies

MiniDiscsaredesignedsothatfurthercopiescannotbemadefromdigitally

recorded MiniDisc tracks. This is a specification of the SCMS (Serial Copy

Management System).

You cannot record music on the back side of a MiniDisc.

MiniDiscs cannot be inserted when they are turned over.

(Page 37)

You don’t need to search for the starting point at which to

record.

H About track numbers

The unit automatically finds the point at which recording can start.

Recording will start from that point.

When you make a recording on a MiniDisc, track numbers are created

automatically.

When recording from CDs inserted in this unit or making a

digital recording from an external unit (CD or MD)

Youcancheckthetotalorremainingrecordabletime(possible

recording) before recording.

New track numbers will be created automatically according to the original

tracks (Synchro mark function).

This lets you plan a recording session so that the last song will not

come to an abrupt end before it has finished. (Page 17)

I When you record from a CD to a MiniDisc, the track numbers recorded

on the MiniDisc may not match the track numbers on the CD.

The date and time of a recording are automatically saved with

the recording.

First track

Second track Third track

If you have set the date and time, they will be automatically recorded

when a recording is made. (page 8)

Track A

Track B

Track C

Second

track

First track

Third track

H Information (TOC) to be recorded on an MD

The TOC (Table of Contents) is information on track numbers and

recording areas to allow the unit to recognize musical selections or

sounds.

Track A

Track B

Track C

The entire MD is controlled depending on this TOC, which enables the

unit to find the beginning of a track quickly or to automatically record in

a vacant area.

When recording from this unit's radio

I The TOC is recorded in a specific area on a MiniDisc, which is not

One continuous recording is regarded as a single track.

used for sound recording.

First track

Second track Third track

Track A

Track B

Track C

First track

(Track A)

(Track B)

(Track C)

When recording from external analog equipment

Area for recording

the sound

Area for TOC (recording track

numbers, track names, etc.)

If there is 1.5 seconds or more of silence, the blank space is assumed to

be the space between tracks, and a new track number is created automati-

cally (Auto mark function).

I Ifthesignaltoberecordedcontainssomenoise, thetracknumbersmay

not be properly created.

When you start recording or editing, “TOC” will appear in the display

window.

This indicates that information in the TOC is now being changed

accordingtorecordingoreditingbeingperformed. (ThechangedTOC

is not yet recorded on the MiniDisc at this time.)

I You can also record musical selections as a single track without using

the Auto mark function.

About 1.5

second

The TOC is recorded when

• you stop recording.

Silence

• you switch to another input source.

• you eject the MiniDisc.

• you turn the power off.

First track

Second track

DoNOTunplugthepowercordwhiletheTOCisbeingrecorded(“TOC”

is flashing). Also, do not subject the unit to any shocks or sharp jolts.

Otherwise the TOC will not be correctly recorded, and consequently

proper playback may not be possible.

Note:

I When external units such as a DSS tuner or a DAT are connected and

a recording is made, the Auto mark function will work.

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

H Recording from a CD onto a MiniDisc

(One-Touch Editing)

1 Press the CD H button, and load the compact disc.

2 Load a recordable MiniDisc.

3 Check the record mode by pressing the REC MODE button.

4 Press the CD 0 MD button.

I Playback of the first track and recording begin.

I When the disc is completely recorded, recording automatically stops.

If recording does not begin:

When not all of the tracks on a CD can be recorded, the unit will enter the

recording stand-by mode. To record on only those tracks which can be

recorded, press the CD 0 MD button.

To cancel operation:

Before pressing the CD 0 MD button, press the CD H or MD H button.

To stop recording:

Press the CD H button.

After recording the track number, playback and recording will stop.

It is not possible to pause recording.

Note:

I You can program a series of tracks and record them. (Page 14)

If recording does not begin:

Number of non-recordable tracks

Recordable track numbers

H About monaural long-play mode

When a recording is made in the monaural long-play mode, the length of

the recording can be double that of a stereo recording for the same amount

of space on the MD. The monaural long-play mode is very useful for

recording songs that were originally recorded in monaural, or for recording

talk programs.

REC MODE

Press the REC MODE button.

I Each time the button is pressed, the display will switch between the

stereo mode and the monaural long-play mode.

I This mode cannot be changed while recording.

I The level meter shows stereo indication even when the mode is the

monaural long-play mode.

Stereo mode

I The recording mode will not change back until you change it manually.

After you have made a recording in the monaural long-play mode, it is

recommended that you return the unit to the stereo mode so that you

won’t forget to do so later.

Monaural long-play mode

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Recording desired tracks from a CD onto a

MiniDisc (Track Editing)

You can record one track or a series of several tracks from a CD onto an

MD.

You can select one track and record it. (If the track numbers are not in

succession, you cannot select a series of tracks.)

4,5

1 Press the CD H button, and load a compact disc.

2 Load a recordable MiniDisc.

3 Select the track to start recording by the 5 or 4 button.

I The selected track number appears.

4 Press the TRACK button.

I To record a single track, skip to step 6.

5 Select the track to end recording by pressing the TRACK button.

6 Press the CD 0 MD button.

I When all tracks are recorded, recording automatically stops.

If recording does not begin:

When not all of the tracks on a CD can be recorded, the unit will enter the

recording stand-by mode. To record on only those tracks which can be

recorded, press the CD 0 MD button.

Start track number

To cancel operation:

Before pressing the CD 0 MD button, press the CD H or MD H button.

To stop recording:

Press the CD H button.

After recording the track number, playback and recording will stop.

It is not possible to pause recording.

Selected tracks End track number

To rerecord:

If you wish to rerecord, you can erase a track that is already recorded,

starting from any point in the old track, to begin a new recording.

Beawarethatwhenyoudothis, allofthetracksandtracknamesthatfollow

the newly recorded track will be erased.

1 During playback, press the MD 06 button at the point where you wish

to begin rerecording.

I The unit will pause.

2 Press the I REC button.

I The "R.ERASE OK?" display will appear.

3 Press the ENTER button.

I The unit will enter the recording stand-by mode.

4 Select the recording source and start recording.

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Recording from the built-in radio onto a MiniDisc

1 Tune in the radio station to be recorded.

2 Load a recordable MiniDisc.

3 Press the I REC button.

I The unit will enter the recording stand-by mode.

I Automatic tuning is impossible while in the recording stand-by mode.

4 Check the recordable time by pressing the DISPLAY button on the

remote control.

5 Press the MD 06 button.

I During recording, you cannot change the station.

Note:

I When recording from the AM band, put the unit in the recording stand-

by mode. Then, before recording, separate the AM loop antenna from

the main unit, and adjust the radio reception so that the AM station is

tuned in clearly.

To interrupt recording:

Press the MD 06 button during recording.

Press the MD 06 button again to resume recording.

The track number increases.

To record the track number during recording:

Press the I REC button.

To stop recording:

Press the MD H button.

After recording the track number, recording stops.

Notes:

I The contents of a single recording are recorded under a single track

number as a series of tracks.

I If you use the monaural extended recording mode, you can make

recordings that are about twice as long as stereo recordings. This is

convenient for recording monaural broadcasts or talk programs. (Page

17)

Number of tracks already recorded

Recordable time

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING

We will explain the 5 editing functions you can use to create your own

recorded MiniDiscs.

Divide

A track can be divided into two tracks. If two selections were recorded as

a single track because there was not enough silent space between the

tracks, you can use the DIVIDE function to separate the selections.

This feature is also convenient for identifying specific points with one

selection so that you can locate those points easily whenever you like.

(Page 22)

Combine

Two adjacent tracks (for example, the third and fourth tracks) can be

combined.

If there is a prolonged silence in the middle of a selection that is recorded,

a single piece of music may be recorded as two tracks. If this happens,

these two tracks can be combined into a single track.

(Page 22)

Erase

Tracks you want to erase can be erased one at a time or all at once.

Once a track has been erased, it cannot be recovered.

Double-check the track number before erasing it.

(Page 24)

Move

The order of the recorded tracks can be changed. This feature is different

from program play. A new track order can be recorded directly on the disc.

When the power is turned off, the revised order will not be changed.

(Page 23)

Programmed move function

This function allows the track numbers to be automatically rearranged in

the order specified for programmed playback. The track numbers will be

adjusted as needed, automatically.

(The tracks that are not included in the programmed selections will be put

at the end of the new track numbers.)

(Page 23)

Track/Disc name

You can assign titles to recorded tracks and to discs. The characters must

becapitalandlowercaseletters,orsymbols.Trackanddiscnamescanuse

up to 100 characters per name.

(Page 25)

Note:

I When a program has been entered, the following operations cannot be

done. You must cancel the program to perform these operations. (Page

14)

I Divide

I Combine

I Erase

I Move

I Track/disc name

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Using the editing function

We will show you some examples of how to use the editing functions. You can create a disc of your favorite selections by recording tracks from a variety

of input sources such as CDs and radio broadcasts.

Digital recording

Recording a

from a CD

broadcast

STEP 1

Recording tracks to

be edited on an MD

Talk

Live performance

STEP 2

Putting the space

The tracks are

between tracks in order

combined using the

combine function.

The tracks are

divided using the

divide function.

STEP 3

Talk

Cutting unnecessary

sections

Cut using the

erase function.

Cut using the

erase function.

STEP4

Rearranging tracks in

your preferred order

The tracks are

rearranged

using the program

move function.

The track is moved

using the move function.

STEP 5

Finish by putting

names on the disc

and tracks

(Disc name)

(Track name)

H Edit Menu

The editing functions are selected from the edit menu. The functions which can be selected from the edit menu will vary, depending on the state which

an editing operation is started.

STEP 2 Edit menu selection

STEP 3 Editing start

STEP 1 Edit menu display

Press the ▲or▼ button.

Each time the button is pressed, the

menus will appear in order.

Press the ENTER button.

You can edit the selected menus.

Press the NAME/TOC EDIT button.

The edit menu will appear.

⇒

(Track name function)

•Within 10 seconds, perform step 3.

•To stop editing at anytime, press the MD H

button.

(Move function)

•A different menu may be displayed.

H Recording the editing results

While editing, the "TOC" indicator is displayed. This means the edit results

have not been recorded on the MiniDisc.

To record the results, select another input or turn the power off. During

writing, the "TOC" display will flash.

Once the "TOC" goes out, all editing has been recorded to the disc.

TOC

Note:

I Storing the edited contents on the disc can be done after several pieces

of editing have been finished.

Flashing during recording

*01-21

98.6.23, 10:09 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Divide

1 Play the track which you wish to divide into two and press the MD 06

button at the point where you wish to divide the track.

I The unit will enter the pause mode.

2 Press the NAME/TOC EDIT button, and then select “DIVIDE” using the

▲ or ▼ button.

3 Within 10 seconds, press the ENTER button.

I To cancel the operation, press the MD H button.

3,4

4 Press the ENTER button again.

I The tracks are divided, and the unit is stopped at the beginning of the

second of the two tracks.

I The numbers of the tracks which come after the divided track are

automatically increased by one.

Note:

I When a track which has been given a name is divided, the two new

tracks will have the same name and date. If the “TOC FULL” message

is displayed, the second track may not be given a name.

H Combine

1 While in the stop mode, select the second of the two tracks you wish to

combine using the 5 or 4 button.

I Startplayingthesecondofthetwotracksyouwishtocombine, andthen

press the MD 06 button.

2 Press the NAME/TOC EDIT button, and then select “COMBINE” using

the ▲ or ▼ button..

3,4

3 Within 10 seconds, press the ENTER button.

I To cancel the operation, press the MD H button.

4 Press the ENTER button again.

I The two tracks are combined, and the unit is stopped at the beginning

of the combined track.

I The numbers assigned to the tracks following the combined track are

automatically decreased by one.

When both tracks have a name:

I When only the first track has a name → That name will be used.

I When only the second of the two tracks has a name → That name will

be used.

I When both tracks have a name → The name of the first track will be

used.

To combine two noncontiguous tracks:

(Example: the first and third tracks)

Move the third track to the second track using the MOVE function.

(Page 23)

Then, combine the first and second tracks using the COMBINE function.

Notes:

I Tracks recorded from analog inputs cannot be combined with tracks

recorded from CDs or MDs using the digital inputs.

I Tracks recorded in the stereo mode cannot be combined with tracks

recorded in the monaural long-play mode.

I Tracks where either track’s recording time is less than 15 seconds may

not be combined.

*22-34

98.6.23, 10:10 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Move

1 While in the stop mode, select the track you wish to move using the 5

or 4 button.

1,4

I Start playing the track to be moved, and then press the MD 06 button.

2 Press the NAME/TOC EDIT button, and then select “MOVE” using the

▲ or ▼ button.

3 Within 10 seconds, press the ENTER button.

4 Select the direction to move the track using the 5 or 4 button.

I To increase the track number ... 4

3,5

I To decrease the track number ... 5

I To cancel the operation, press the MD H button.

5 Press the ENTER button again.

I The track is moved, and the unit is stopped at the beginning of the track.

Note:

I When a track has been moved, the other tracks which are affected will

be assigned new track numbers automatically.

Programmed move:

1 Select the tracks you want to move and enter them into a program.

(Page 14)

2 Make sure that the “PRGM” indicator is lit, and then press the NAME/

TOC EDIT button.

3 Within 10 seconds, press the ENTER button.

I To cancel the operation, press the MD H button.

4 Press the ENTER button again.

I The tracks will be moved, and the programmed move mode will end.

3,4

Notes:

I The track numbers that are not included in the programmed selections

will be put at the end of the new sequence.

I When the same track has been entered into the program twice or more,

the last programmed position will have priority.

*22-34

98.6.23, 10:10 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Erase

To erase tracks one at a time:

1 While in the stop mode, select the track to be erased using the 5 or

4 button.

I Start playing the track you wish to erase, and press the MD 06 button.

2 Press the NAME/TOC EDIT button, and then select “ERASE” using the

3,4

▲ or ▼ button.

3 Within 10 seconds, press the ENTER button.

I To cancel the operation, press the MD H button.

4 Press the ENTER button again.

I The track is erased, and the unit is stopped at the beginning of the

previous track.

I When a track is erased, the numbers assigned to the tracks following

the erased track will be automatically decreased by one.

Notes:

I Once a track has been erased, it cannot be recovered. Double-check

the track number before erasing it.

I When a track is erased, the track name will be erased at the same time.

To erase all of the tracks at once:

1 Press the MD H button.

I The total number of tracks and the total playing time for the MD will be

displayed.

2 PresstheNAME/TOCEDITbutton,andthenselect“ALLERASE”using

the ▲ or ▼ button.

3,4

3 Within 10 seconds, press the ENTER button.

I To cancel the operation, press the MD H button.

4 Press the ENTER button again.

I All of the track numbers and track names will be erased.

*22-34

98.6.23, 10:10 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

I Upto255trackscanbenamedoneachdisc,andeachdisccanbegiven

a disc name.

Notes:

Number of characters you can enter

H Disc names and track names

Up to 100 characters (including spaces) can be entered for each name,

If more than 100 characters are entered, “NAME FULL” will appear.

H Total number of characters per MiniDisc

A total of approximately 1700 characters can be used for all of the disc

and track names. If more than 1700 characters are entered, “TOC

FULL” will appear.

H To create a disc name

1 Press the MD H button.

I The total number of tracks and the total playing time for the MD will

appear.

2 Press the NAME/TOC EDIT button, and then select “DISC NAME”

using the ▲ or ▼ button.

2,7

2,5

3 Within 10 seconds, press the ENTER button.

I The unit will enter the character input mode.

4 Press the DISPLAY button to select the type of characters you want to

2,5

use.

3,6

Alphabetics

(capital letters)

Alphabetics

(lower-case letters)

Numbers or symbols

Type of

characters

Characters

M N

Capital letters

V W X

Lower-case

letters

’

(

)

–

;

Symbols

5 Select the character you wish using the 1/0/▲/▼ buttons.

I When the ▲ or ▼ button is pressed, the following 5 letters will appear.

Cursor

I Eachtimethe 1or0 buttonispressed, thecursorwillmovetothenext

letter.

6 Press the ENTER button to enter the character.

I Repeat steps 4 to 6 above to enter the characters of the name. When

the next character’s type is the same as the previous character, step 4

can be skipped.

7 After entering all of the characters in the name, press the NAME/TOC

EDIT button.

I The disc name will be recorded.

H To erase disc names

After performing steps 1 to 3 mentioned above, do the following:

1 Press the TIMER/DELETE button for at least 2 seconds.

I The "NAME CLEAR?" display will appear.

2 Press the ENTER button.

I The disc name will be erased.

*22-34

98.6.23, 10:10 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

To create a track name

1 During playback, press the NAME/TOC EDIT button.

I “TRACK NAME” will appear.

2 Within 10 seconds, press the ENTER button.

I The unit will enter the character input mode.

I The track you are listening to will be played repeatedly.

1,6

3 Press the DISPLAY button to select the type of characters. (Page 25)

Alphabetics

(capital letters)

Alphabetics

(lower-case letters)

2,5

Numbers or symbols

4 Select the character you want using the 1/0/▲/▼ buttons.

I When the ▲ or ▼ button is pressed, the following 5 letters will appear.

I Eachtimethe 1or0 buttonispressed, thecursorwillmovetothenext

letter.

5 Press the ENTER button to enter the character.

I Repeat steps 3 to 5 above to enter characters in the name. When the

next character’s type is the same as the previous character, step 3 can

be skipped.

3,4,5

6 After entering all of the characters in the name, press the NAME/TOC

EDIT button.

I The track name will be recorded.

I The unit will return to normal playback.

Notes:

I The track name function can be used while in the stop mode (when

selecting a track), in the pause mode, or in the recording mode.(Select

“TRACK NAME” from the edit menu.)

I If you create a track name while recording the track, make sure you

finish entering the name before you finish recording the track.

If the end of the recording is reached before you have entered the

complete name, only the characters entered before the recording

ended will be recorded.

H To erase track names

After performing steps 1 to 2 mentioned above, do the following:

1 Press the TIMER/DELETE button for at least 2 seconds.

I The "NAME CLEAR?" display will appear.

2 Press the ENTER button.

I The track name will be erased.

H To add a character

H To erase a character

1 To correct a disc name, perform steps 1 - 3 on page 25.

To correct track names, perform steps 1 - 2 on page 26.

2 Press the CURSOR << or >> button to make the character at the

2 PresstheCURSOR<<or>>buttontomakethecharacteryouwish

position where you wish to add a character begin flashing.

to erase begin flashing.

3 Select the character you want to add, using the 1/0/▲/▼ buttons.

3 Press the TIMER/DELETE button.

I The specified character will be erased.

4 Press the ENTER button.

I A letter will be added, and the original letters will move to the right by

4 Press the NAME/TOC EDIT button.

one.

5 Press the NAME/TOC EDIT button.

*22-34

98.6.23, 10:10 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

ENTERING CHARACTERS

H To create names for radio stations that have been

stored in memory

1 Press the TUNER (BAND) button.

2 Select the location number you want to name.

3 Press the NAME/TOC EDIT button.

3,7

4 Press the DISPLAY button to select the type of characters you want to

use. (Page 25)

Alphabetics

(capital letters)

Alphabetics

(lower-case letters)

Numbers or symbols

5 Select the character you wish using the 1/0/▲/▼ buttons.

6 Press the ENTER button to enter the character.

I Repeat steps 4 to 6 above to enter the characters of the name. When

the next character’s type is the same as the previous character, step 4

can be skipped.

7 After entering all of the characters in the name, press the NAME/TOC

EDIT button.

I The name will be recorded.

To erase a name:

After performing steps 1 to 3 mentioned above, do the following:

Note:

1 Press the TIMER/DELETE button for at least 2 seconds.

I You can enter up to 12 characters.

You cannot save a name with more than 12 characters.

I The "NAME CLEAR?" display will appear.

2 Press the ENTER button.

I The name will be erased.

H To change the message displayed when the

power is turned off

ItispossibletochangethemessagedisplayedontheLCDwhenthepower

is off, to suit your preference.

The default message is "ENJOY MUSIC!".

Thiscanbechangedtoanyothermessageyouchoose,upto20characters

in length.

1 Press the MESSAGE button.

I The unit will enter the character input mode.

2 Press the DISPLAY button to select the type of characters you want to

1,5

use.(Page 25)

Alphabetics

(capital letters)

Alphabetics

(lower-case letters)

Numbers or symbols

3 Select the character you wish using the 1/0/▲/▼ buttons.

4 Press the ENTER button to enter the character.

I Repeat steps 2 to 4 above to enter the characters of the name. When

the next character’s type is the same as the previous character, step 2

can be skipped.

5 After entering all of the characters in the name, press the MESSAGE

button.

I The message will be recorded.

6 Turn the power off, and check the contents of the programmed mes-

sage.

To erase a programmed message:

1 Press the MESSAGE button.

2 Press the TIMER/DELETE button for at least 2 seconds.

I The "NAME CLEAR?" display will appear.

Note:

3 Press the ENTER button.

I When the power is on and you do not make any changes or press

any buttons for at least 5 minutes (while in the CD or MD playback

mode), the message will be displayed.

I The programmed message will be erased, and the display will return

to"ENJOY MUSIC!".

*22-34

98.6.23, 10:10 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

To enter characters from a computer keyboard

You can enter characters by connecting a keyboard.

Compatible keyboards :

YoucanuseanykeyboardthatcanbeconnentedtoanIBMcompatiblePC

which has the plug shape shown to the left.

(Macintosh keyboards cannot be used.)

1 Connect a keyboard to the KEYBOARD terminal when the power to the

main unit is off.

2 Press the POWER button to turn the power on.

3 Proceedtoanyoftheunit'sfunctionsinwhichyoucanentercharacters.

I To create a disc name on an MD : Perform steps 1-3 on page 25.

I To create a track name on an MD : Perform steps 1-2 on page 26.

I To create names for radio stations that have been stored in memory :

Perform steps 1-3 on page 27.

I To change the message displayed when the power is turned off :

KEYBOARD

Perform step 1 on page 27.

4 Then, enter the characters you want from the keyboard.

Note:

I Do not plug in or unplug the keyboard plug while the power is on, as this

may lead to damage.

Keys you can use :

Pause

Break

Scroll

Lock

Screen

SysRq

ESC

F10

F11

F12

Num

Look

Casp

Lock

Scroll

Lock

(

)

Page

Num

Look

Insert

Home

End

{

[

}

]

Page

Down

Delete

Tab

Home

PgUp

;

Caps

Lock

Enter

Shift

End

PgDn

Enter

Ctrl

Alt

Ctrl

Ins

Del

Characters shown with the

Entering characters:

mark cannot be enterred.

Normally, lower-case letters are entered.

← key

: This key has the same function as the << button.

The cursor will move one character to the left.

: This key has the same function as the >> button.

The cursor will move one character to the right.

Shift key : When the shift key is held down and any letter key is

pressed, an upper-case letter will be entered.

→ key

Space key : Enters a space and moves the cursor one character to

the right.

Delete key : This key has the same function as the TIMER/DELETE

button.

The other keys on the keyboard are disabled.

The letter under the cursor will be erased, and the letters

to the right will move one character to the left.

Enter key : This key has the same function as the NAME/TOC EDIT

button.

However, although the letters you enter can be checked

after they are entered, the unit cannot be put in the

editing mode for changing characters already entered.

*22-34

98.6.23, 10:10 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO USE THE BUILT-IN TIMER

H Timer playback

Before timer playback, the following preparations are required.

I Make sure that the clock setting is correct. (Page 8)

I Load a CD or a MD.

I Preset the radio station. (Page 12)

Programming for timer playback:

1 While in the stop mode, press the TIMER/DELETE button and then the

▲ or ▼ button so that the TIMER SET display appears.

2 Within 10 seconds, press the ENTER button, and then select the timer

mode using the ▲ or ▼ button.

3 Press the ENTER button.

I The start time setting display will appear.

ENTER

4 Enter the hour for the start time using the 1 or 0 button. Then, press

TIMER/

DELETE

the ENTER button.

5 Enter the minute using the 1 or 0 button. Then, press the ENTER

button.

I The stop time setting display will appear.

I The display time will increase by one hour automatically.

6 Enter the hour for the stop time using the 1 or 0 button. Then, press

the ENTER button.

7 Enter the minute using the 1 or 0 button. Then, press the ENTER

button.

I The start and stop times are now set.

8 Select the source program using the 1 or 0 button.

I The source is selected in the following sequence:

MD → CD → TUNER → AUX → DIGITAL1 → DIGITAL2 → PHONO

I If TUNER is selected, press the ENTER button, and then select the

preset number using the 1 or 0 button.

9 Press the ENTER button.

10 Adjust the volume level using the 1 or 0 button.

11 Press the ENTER button.

I Timer playback setting is complete.

Note:

I Ifyoudonotperformthenextoperationwithin10seconds,theoperation

will be canceled. If this happens, try the operation again from the

beginning.

Setting timer playback:

1 Press the TIMER/DELETE button.

I Press the ▲ or ▼ button so that the T-STANDBY display appears.

2 Press the ENTER button.

I The settings will appear in order, and the unit will enter the timer

playback standby mode. (If the power is on, the unit will be turned off.)

3 When the timer playback start time is reached, the power will be turned

on and the volume will gradually increase to the preset position.

When the timer playback stop time is reached, the power will be turned

off automatically.

Notes:

I When the CD or MD is played to the end, playback will stop before the

stop time.

If you wish to play to the stop time, set repeat play for the CD or MD.

I The timer playback with this unit cannot be used to control equipment

connected to this unit. You must use the timer of the other equipment,

if it has one.

I The timer playback and timer recording functions cannot be used at the

same time.

*22-34

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Timer recording

Before timer recording, the following preparations are required.

I Make sure that the clock setting is correct. (Page 8)

I Load a recordable MD.

I Preset the radio station. (Page 12)

Programming for timer recording:

1 Whileinthestopmode,presstheTIMER/DELETEbutton, andthen the

▲ or ▼ button so that the TIMER SET display appears.

2 Within 10 seconds, press the ENTER button, and then select the timer

mode using the ▲ or ▼ button.

ENTER

3 Press the ENTER button.

I The start time setting display will appear.

TIMER/

DELETE

4 Enter the hour for the start time using the 1 or 0 button. Then, press

the ENTER button.

5 Enter the minute using the 1 or 0 button. Then, press the ENTER

button.

I The stop time setting display will appear.

I The display time will increase by one hour automatically.

6 Enter the hour for the stop time using the 1 or 0 button. Then, press

the ENTER button.

7 Enter the minute using the 1 or 0 button. Then, press the ENTER

button.

I The start and stop times are now set.

8 Select the source program using the 1 or 0 button.

I The source is selected in the following sequence:

TUNER

→

AUX

→

DIGITAL1

→

DIGITAL2

→

PHONO

I If TUNER is selected, press the ENTER button, and then select the

preset number using the 1 or 0 button.

9 Press the ENTER button.

10 Adjust the volume level using the 1 or 0 button.

11 Press the ENTER button.

I Timer recording setting is complete.

Note:

I Ifyoudonotperformthenextoperationwithin10seconds,theoperation

will be canceled. If this happens, try the operation agein from the

beginning.

Setting timer recording:

1 Press the TIMER/DELETE button.

I Press the ▲ or ▼ button so that the T-STANDBY display appears.

2 Press the ENTER button.

I The settings will appear in order, and the unit will enter the timer

recording standby mode. (If the power is on, the unit will be turned off.)

3 When the timer recording start time is reached, the power will be turned

on to start recording.

Notes:

I You cannot make a timer recording using CDs.

When the timer recording stop time is reached, the power will be turned

off automatically.

I The timer recording with this unit cannot be used to control

equipment connected to this unit. You must use the timer of the

other equipment, if it has one.

I The timer playback and timer recording functions cannot be used

at the same time.

In the following cases, the timer recording function will not work.

I When a MiniDisc has not been inserted.

I When a playback-only MiniDisc is inserted.

I When the MiniDisc you inserted is protected against accidental

erasure.

I When there is no recording space left on the MiniDisc you have

inserted .(when the "TOC FULL" or "DISC FULL" messages ap-

pear)

*22-34

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H To check the timer setting

1 While in the timer standby mode, press the TIMER/DELETE button.

2 Press the ▲ or ▼ button so that the TIMER CALL display appears.

3 Within 10 seconds, press the ENTER button.

I The timer settings will appear in order, and then the original display will

reappear.

H To cancel the timer operation

If the power is turned on, the timer will be canceled.

The timer operation can also be canceled as follows.

1 While in the timer standby mode, press the TIMER/DELETE button.

2 Press the ▲ or ▼ button so that the TIMER CANCEL display appears.

3 Within 10 seconds, press the ENTER button.

I The timer operation will be canceled. (“TIMER” or “TIMER REC” will go

off.) The start and stop times will be stored.

*22-34

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Sleep operation

The radio, compact disc and MiniDisc can all be turned off automatically.

1 Play the desired sound source.

2 Press the TIMER/DELETE button, and then press the ▲ or ▼ button so

that the SLEEP display and setting time appear.

3 Within 10 seconds, press the ENTER button.

I If you wish to use the displayed time, press the ENTER button.

To change the sleep timer:

3,5

4 Set the sleep time using the 1 or 0 button.

I The setting time is changed in 5-minute increments between 2 hours

and5minutes,or1minuteincrementsbetween5minutesand1minute.

5 Press the ENTER button.

I The sleep operation will start.

I When it is one minute before the programmed sleep time, the volume

will be reduced gradually. During this period, you cannot change the

volume.

6 The unit will be turned off automatically after the preset sleep time has

Sleep timer indicator

elapsed.

Notes:

I Once the sleep time is set, it will remain the same until the setting is

changed.

I This sleep functions of this unit cannot be used to control equipment

connected to this unit. You must use the sleep functions of the other

equipment, if it has them.

To confirm the sleep timer setting:

1 Press the TIMER/DELETE button.

2 Press the ▲ or ▼ button so that the SLEEP display and setting time

appear.

To cancel the sleep operation:

If the power is turned off, the sleep operation will be canceled.

The timer operation can also be canceled as follows if the power cannot be

turned off during recording.

▲

▼

ENTER

1 Press the TIMER/DELETE button.

2 Press the ▲ or ▼ button so that the SLEEP OFF display appears.

TIMER/DELETE

3 Within 10 seconds, press the ENTER button.

I The sleep operation will be canceled. ("SLEEP" will go off.)

H Simultaneous sleep and timer operation

1 Play the desired item (compact disc, MiniDisc, etc.).

2 Set the sleep timer.

3 Set timer playback.

I Whenthepresetsleeptimehaselapsed,thepowerwillbeautomatically

turnedoff. Whenthetimerstarttimeisreached, thepowerwillbeturned

on again.

*22-34

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

USING EXTERNAL UNITS

H Connecting external units

Before connecting external units, turn the power to this unit and

external units off.

Connecting this unit to a DSS tuner or a DAT (equipment which can output digital signals)

Optical digital cable (AD-M3DC,

DSS tuner

sold separately)

DIGITAL1

OPTICAL

DIGITAL2

COAXIAL

DAT

AUX

DIGITAL

Optical digital cable (AD-M1DC,

sold separately)

This product can be connected to digital equipment such as DATs, DSS tuners, other CD players or MD recorders.

I The sampling frequency may be different, depending on the specific piece of digital equipment. (DATs, etc.)

This product automatically adjusts the sampling rate so that it can be used with such equipment.

(Sampling rate convertor: 32 kHz, 48 kHz →44.1 kHz automatically adjusted)

Connecting to stereos or MD/CD players (equipment which can output analog signals)

The other MD/CD player

Commercially available cord with 3.5 mm

stereo mini-plug and RCA plugs

To the output

/ headphones jack

RCA cord

LEFT

RIGHT

LEFT

Analog output jack

AUX ANALOG IN/OUT

AUX

OUT

RIGHT

LEFT

Analog input jack

LEFT

RIGHT

LEFT

I Red plug → To RIGHT

I White plug → To LEFT

RCA cord

Note:

I When audio input and output signals of an external unit are connected to this unit, oscillation may occur. In such a case, disconnect either

the input or output connection.

Connecting to a stereo turntable

PHONO

RIGHT

LEFT

RIGHT

LEFT

I Red plug → To RIGHT

I White plug → To LEFT

*22-34

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

Headphones

PHONES

I Beforepluggingorunpluggingtheheadphones,pleasereducethe

volume level.

I Be sure that your headphones have a 1/8" (3.5 mm) diameter plug

and are between 16 ohms and 50 ohms impedance. The recom-

mended impedance is 32 ohms.

I When headphones are connected, the speakers are disabled

automatically. AdjusttheVOLUMEcontrolforthedesiredvolume.

*22-34

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

H Listening to sound from an external unit

To listen to sound from an external unit connected to the digital

input terminal:

1 Press the AUX button.

AUX → AUX1 DIGITAL → AUX2 DIGITAL → PHONO

VOLUME

I To select "AUX1 DIGITAL" or "AUX2 DIGITAL".

2 Start playback on the external unit.

AUX

3 Adjust the sound level using the VOLUME buttons of this unit.

To listen to sound from an external unit connected to the analog

input terminals:

1 Press the AUX button.

INPUT LEVEL

AUX → AUX1 DIGITAL → AUX2 DIGITAL → PHONO

I To select "AUX" or "PHONO".

2 Start playback on the external unit, and adjust the input sound level

using the INPUT LEVEL control.

I When the INPUT LEVEL control is set to Min, no sound is obtained.

I The maximum level should not exceed "0 dB".

3 Adjust the volume using the VOLUME buttons on this unit.

H Recording sound from an external unit

To start recording the moment the external unit starts playback

(synchro recording):

MD recording will start automatically, as soon as playback starts on the

external unit. This applies to both digital inputs and analog inputs.

I The space-cut function will work automatically during synchro record-

ing.

1 Load a recordable MiniDisc.

2 Press the AUX button.

I Select the input that corresponds to the terminals where the external

unit you will record from is connected.

3 Play the recording on the external unit, and adjust the recording level

usingtheINPUTLEVELcontrol.(Thisisonlynecessarywhenrecording

from analog inputs.)

I In the case of digital inputs, it is not necessary to adjust the recording

level.

I The maximum level should not exceed "0 dB".

I Adjust the recording level, and then stop the external unit.

4 Press the S. SYNC button.

5 Start playing the music you want to record on the external unit.

I Recording will start automatically.

6 When playback has finished on the external unit, this unit will automati-

cally enter the recording stand-by mode.

I Cancel the mode by pressing the MD ■button.

When the MD ■button is pressed, the TOC will be recorded.

Ifyouwanttoperformotheroperationsatthispoint,waituntilthisdisplay

disappears.

To stop recording:

What is the space-cut function?

Press the MD ■button.

If there is silence in the playback signal that lasts 4 seconds during a

synchrorecording,therecordingwillstopautomaticallyandtheunitwill

enter the recording stand-by mode. Then, when sound from the

playback unit resumes, recording will automatically restart.

(A space of 4 seconds is placed between tracks.)

Note:

I On some CD players, the track numbers cannot be recorded automati-

cally.

I If there is noise between tracks of the sound source, the synchro

recording or the space-cut function may not work properly.

If this happens, make the recording manually.

I When you need to record tracks or audio that include very quiet

passages lasting 4 seconds or more, manual recording is recom-

mended.

*22-34

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

To start a recording by yourself (manual recording):

While you are listening to the playback sound from an external unit (tuners,

CDs, etc.), you can start recording by yourself anytime.

1 Load a recordable MiniDisc.

2 Press the AUX button.

I Select the input that corresponds to the terminals where the external

unit you will record from is connected.

3 Press the I REC button.

I The unit will enter the recording stand-by mode.

I Whenyoudonotwanttousetheautomarkfunction, presstheA. MARK

button on the remote control.

4 Start playing the music you want to record on the external unit.

5 Adjust the recording level using the INPUT LEVEL control.

(This is only necessary when recording from analog inputs.)

I The maximum level should not exceed "0 dB".

I In the case of digital inputs, it is not necessary to adjust the recording

level.

6 Press the MD 06 button.

To stop recording:

Press the MD ■button.

0dB

*35-40

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

WHAT IS A MINIDISC?

The disc is stored in a cartridge. You can handle it easily without

worrying about dust, fingerprints, etc.

However, dust entering the opening of the cartridge, dirt on the

cartridge, etc. may cause malfunctions. Please note the following.

Handling MiniDiscs

Adaptive TRansform Acoustic Coding

[ATRAC]

Do not touch the disc directly!

Do not open the shutter or touch the disc directly.

If the shutter is opened forcibly, it may break.

ATRAC (Adaptive TRansform Acoustic Coding) is a new technology that

is designed to eliminate the information in sounds which you can not hear

andtocompresstheremainingsounddatasothattherecordingusesabout

1/5 of the original sound information.

Sound data is analyzed and filtered to take advantage of psycho acoustic

masking. The acoustic quality of the sound is not impaired.

Disc

Cartridge

Shutter

Types of discs

There are two types of MiniDiscs: playback-only and recordable type.

I Playback-only MiniDisc:

This type of MiniDisc is used for commercially available pre-recorded

music. This is the same kind of optical disc as a CD. Playback is

performed using an optical pickup.(Recording and editing are not

possible.)

A shutter is used on only one side (back).

Where not to store discs:

I Recordable MiniDisc:

Do not store discs in places with high temperatures or humidity.

Specifically, do not leave discs in places exposed to direct sunlight or

in cars with doors and windows closed.

Do not leave discs in places where sand can get into the cartridge

easily (e.g., a beach).

This is a “blank disc” is which recording can be performed. A magneto

optical disc is used.

Recordings are made using a laser and a magnet. Repeated recording

is possible.

Regular cleaning:

Ifthesurfaceofthecartridgebecomesdustyordirty, cleanitwithasoft,

dry cloth.

Label

To prevent recorded discs from being

erased accidentally

Shutters will be used on both sides.

(accidental erasure prevention)

Helpful tip when attaching labels

Slide the accidental erasure prevention tab, located on the side of the

disc, in the direction indicated by the arrow.

To attach labels on MD cartridges, be sure to observe the following:

I The disc will then be protected against accidental erasure.

Ifalabelisnotproperlyattached, theMDmayjaminsidetheunitanditmay

not be possible to remove it.

I To add a recording to such a disc, slide the accidental erasure

prevention tab back to its original position.

I Only attach labels in the specified location. (Do not put labels anywhere

else.)

Tab

I Do not put a label on top of another one.

I If a label is peeled off or it lifts away, replace it with a new one.

What is a MiniDisc?

Shock-Resistant Memory

During playback, approximately 10 seconds of information is stored in the

semiconductor memory. Therefore, even when the pickup cannot read

information for a second or two because of external shock, the sound

continues without interruption because the information stored in memory

is output.

I A MiniDisc is a 2-1/2" (64-mm) diameter disc which is stored in a

cartridge. MiniDiscs are easy to handle, compared with compact

discs, because they are protected against dust and scratches.

I Recording and playback use a digital system with a sound quality

that is similar to that with compact discs.

MiniDiscscannottwistorstretchliketapes. Thequalityofsoundwill

not deteriorate. MiniDiscs are extremely durable.

I Never disassemble a MiniDisc.

*35-40

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

MINIDISC SYSTEM LIMITATIONS

Even if the maximum recording time of a MiniDisc is not

reached, “DISC FULL” or “TOC FULL” may be displayed.

When the number of tracks used reaches the limit, regardless of the remainder being

recordingtime,furtherrecordingwillbeimpossible. (Maximumnumberoftracks:255)

Even if the number of tracks and the recording time have

not reached the limit, “DISC FULL” may be displayed.

When emphasis information (equalizer treatment in the treble section) in a track

switches on/off many times, each change is assumed to be the beginning of a new

track, which will quickly use up all available track numbers, making further recording

impossible, regardless of the remaining time, recording time or the number of tracks

on the original.

Even if several short tracks are erased, the remaining

recording time may not show an increase.

When the remaining recording time of a disc is displayed, short tracks less than 15

seconds long may not be included in the total.

Two tracks may not be combined in editing.

For MiniDiscs which repeated recording and editing operations were performed,

the COMBINE function may not work.

The total of the recorded time and time remaining on a disc

may not add up to the maximum possible recording time.

A cluster (about 2 seconds) is normally the minimum unit of recording. So, even if a

track is less than 2 seconds long, it will use about 2 seconds of space on the disc.

Therefore, the time actually available for recording may be less than the remaining

time displayed.

If there are scratches on a disc, those sections will be automatically avoided (no

recording will be placed in those sections). Therefore, recording time will be

reduced.

TROUBLESHOOTING

If a problem occurs

If this unit functions abnormally during operation, first check the following items. If the unit continues to function abnormally, or if an abnormality appears

other than listed below, turn off the player’s power and disconnect the AC power plug, then consult your SHARP dealer or service personnel.

General

SYMPTOM

POSSIBLE CAUSE

• Did a power failure occur?

––

REMEDY

• The clock is wrong.

• Try setting it again.

• When a button is pressed, the unit

does not respond.

• Turn the power off and on again, and then retry

the operation.

• No sound is heard.

• Connect the wires securely.

• Increase the volume level.

• Disconnect the headphones.

• Are the speaker wires disconnected?

• Is the volume level set to "0"?

• Are the headphones connected?

• Radios make unusual noise or the

picture on the TV screen is distorted.

• It is recommended that you use an outdoor an-

tenna.

• When a radio or TV which uses an indoor an-

tenna is placed near the unit, the picture on the

TV screen may be distorted or the radio may not

function properly.

CD playback

SYMPTOM

REMEDY

POSSIBLE CAUSE

• Even though a disc has been loaded,

“NO DISC” or “ERROR” is displayed.

• Load the disc with the correct side up.

• Clean the disc.

• The disc is loaded upside down.

• The disc is very dirty.

• Playback stops in the middle of a

track, or playback is not performed

properly.

• Load the correct disc.

• Place the unit on a firm, level surface free from

vibration.

• The disc which does not satisfy the standards.

• Is the unit located near excessive vibrations?

• Remove the disc and leave the power turned on.

The unit should function properly in about 1 hour.

• Playback sounds are skipped.

• Has condensation formed inside the unit?

*35-40

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

MD recording and playback

SYMPTOM

POSSIBLE CAUSE

REMEDY

• A recording cannot be made.

• IstheMiniDiscprotectedagainstaccidentalerasure? • Slide the accidental erase prevention tab back to

its original position.

• Replace it with a recordable disc.

• Did you try to record on a playback-only MiniDisc?

• Put in another recordable disc with recording

space on it.

• Can you see the “TOC FULL” message in the dis-

play?

• Even though a disc has been

loaded, “NO DISC” or “ERROR” is

displayed.

• Clean the disc.

• The disc is very dirty.

• Place the unit on a firm, level surface free from

vibration.

• Is the unit located near excessive vibrations?

• Playback sounds are skipped.

• Remove the disc and leave the power turned on.

The unit should function properly in about 1 hour.

• Has condensation formed inside the unit?

Radio reception

SYMPTOM

POSSIBLE CAUSE

REMEDY

• Radios make unusual noise

consecutively.

• The unit is placed near the TV or computer.

• The antenna direction is not placed properly.

• Place the unit apart from the noise.

• Correct the antenna direction.

• The preset channel cannot be

called.

• Did a power failure occur?

• Preset the channel again.

Remote control

SYMPTOM

POSSIBLE CAUSE

REMEDY

• The remote control does not

function or does not operate

properly.

• The batteries (polarity) are not inserted properly.

• The batteries inside the remote control are dead.

• The remote control is operated from an incorrect

distance or angle.

• Insert properly.

• Replace the batteries.

• Operate it within a range of 8" (0.2 m) to 20' (6 m)

andwithinanangleof15°toeithersideofcenter.

• The power cannot be turned on

from the remote control.

• Is the AC power cord plugged in?

• Connect the AC power cord.

If a problem occurs

If this product is subjected to strong external interference (mechanical

shock, excessive static electricity, abnormal supply voltage due to light-

ning, etc.) or if it is operated incorrectly, it may malfunction or the display

may not function correctly. If such a problem occurs, do the following:

RESET

1 Unplug the AC power cord from the AC outlet.

2 Press the RESET button on the back of the unit for at least 3 seconds.

3 Plug the AC power cord back into the AC outlet.

I When the RESET button is pressed, all of the settings in memory will be

erased.

I If strange sounds, smells or smoke come out of the unit, or if a foreign

object falls into the unit, turn off the power, unplug the AC power cord

from the AC outlet immediately. Contact an authorized Sharp Servicer.

*35-40

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

When an error message is displayed, proceed as follows:

Error messages Meaning

Remedy

BLANK MD

• Nothing is recorded.

• Replace the disc with a recorded disc.

(

Neither music nor a disc name have been recorded on this MD.)

You tried to record from a disc which you are not allowed to copy.

Can't COPY

Can't EDIT

Can't REC

•

Replace it with another disc which you can copy from (regular CD)

• A track cannot be edited.

Change the stop position of the track and then try editing it.

• Recording cannot be performed correctly due to vibration

or shock in the unit.

• Rerecord or replace it.

DEFECT

• Since this disc has scratches on it, the recording operation

was skipped.

• Replace the disc with another recordable disc.

Din UNLOCK

• Incorrect digital signals are input.

• Connect correct digital signals.

• Use analog inputs.

DISC ERR*

DISC FULL

EDIT OVER

• The disc is damaged or there is no TOC on the disc.

• The disc is out of recording space.

• Reload the disc or replace it.

• Replace the disc with another recordable disc.

• Replace it with another recordable disc.

• Reload the disc.

• There is no space left for recording CD.

FOCUS ERROR • The proper focus cannot be obtained.

MD ERROR

MECHA ERR*

NAME FULL

NO DISC

• The unit has determined that it is out of order

by performing a self-diagnosis.

• Ask the store where you purchased this unit, about repairs.

• There is a mechanical problem and the disc is not working

properly.

• Turn off the power, and press the EJECT button.

• Shorten the disc or track name.

• The number of characters for the disc name or track name

exceeds 100.

• A disc has not been loaded.

• The disc data cannot be read.

• Load a disc.

• Reload the disc.

NOT AUDIO

• The data recorded on this disc is not audio data.

• Select another track.

• Replace the disc.

PLAYBACK MD

PROTECT

• You tried to record on a playback-only disc.

• Replace it with a recordable disc.

• The unit has determined that it is out of order by performing a

self-diagnosis.

•

Turn the power off and back on. If the problem is not resolved,

ask the store where you purchased this unit, about repairs.

PROTECTED

TEMP OVER

TOC ERR*

• The disc is write protected.

• The temperature is too high.

• Move the write protection tab back to its original position.

• Turn off the power, and wait for a while.

• The disc has a large amount of damage.

• TOC information cannot be read.

• Replace the disc with another disc.

• The MD does not meet the specifications for MDs.

TOC FULL*

• There is no space left for recording character information

(track names, disc names, etc.).

• Replace it with another recordable disc.

TOC W ERROR

U TOC ERR*

• The unit has determined that it is abnormal

by performing a self-diagnosis.

• Ask the store where you purchased this unit, about repairs.

• The TOC information on this disc does not meet the MD

specifications or it cannot be read.

• Replace it with another disc.

• Erase all the data, and try recording.

U TOC W ERROR • The TOC information could not be created properly due to

a mechanical shock or to scratches on the disc.

• Turn off the power, and try to write the TOC again.

(Remove any source of shock or vibration while writing.)

? DISC

0 00:00

• The data contains an error.

• Music is not recorded.

• Replace the disc with another disc.

• Replace the disc with a recorded disc.

*: Number or symbol

*35-40

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

Internal care

I In order to ensure proper operation of the CD player, preventative

maintenance (cleaning of the Laser Pick-up lens) should be performed

periodically in order to keep the lens dust-free. Lens cleaners are

commercially available. Contact your local CD software dealer for

options.

External care

I Periodically wipe the cabinet with a soft cloth and dilute soap solution,

then wipe with a dry cloth.

I Do not use chemically treated cleaning cloths or other chemicals.

SPECIFICATIONS

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement

without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these

values in individual units.

(General)

H Main unit section

Power source:

Power consumption:

Output power:

AC 120 V, 60 Hz

80 W

10 watts minimum RMS per

channel into 6 ohms from 60 Hz to

20 kHz,10 % total harmonic distortion

Auxilialy (Analog); 2.0 V (30 kohms)

Auxilialy (Digital-1)

(MiniDisc recorder section)

Type:

Signal readout:

MiniDisc recorder

Non-contact, 3-beam semi-conductor

laser pick-up

Input terminals:

Audio channel:

Stereo; 2 channel

Monaural; 1 channel (long-time

recording mode)

20 - 20,000 Hz

400 - 900 rpm CLV, Approx.

16-bit linear

Auxilialy (Digital-2)

Phono; 2.5 mV (47 kohm)

Headphones; 16- 50 ohms

(recommended; 32 ohms)

Speakers; 6 ohms

Output terminals:

Frequency response:

Rotational speed:

Quantization:

Line out (Analog); 2.0 V (47 kohm)

Width; 5-15/16" (150 mm)

Height; 9-1/2" (241 mm)

Depth; 12-1/8" (307 mm)

9.5 lbs. (4.3 kg)

Filter:

Error correction:

8-times oversampling digital filter

ACIRC (Advanced Cross Interleave

Reed-Solomon Code)

ATRAC (Adaptive TRansformd

Acoustic Coding)

Dimensions:

Weight:

Coding:

Recording method:

D/A converter:

Sampling frequency:

Wow and flutter:

Magnetic modulation overwrite method

1-bit

44.1 kHz

H Speaker section

Unmeasurable

Type:

2-way 4-3/4" (120 mm) woofer and 2" (50

mm) tweeter type

25 W

12.5 W

6 ohms

(less than 0.001% W. peak)

95 dB (1 kHz)

90 dB (1 kHz)

Signal/noise ratio:

Dynamic range:

T.H.D at 1kHz:

Maximum input power:

Rated input power:

Impedance:

0.1%

Dimensions:

Width; 5-3/4" (146 mm)

Height; 9-1/2" (241 mm)

Depth; 9-1/8" (229 mm)

4.9 lbs. (2.2 kg)/each

(Compact disc player)

Type:

Signal readout:

Compact disc player

Non-contact, 3-beam semi-conductor

laser pickup

Weight:

Rotational speed:

Error correction:

200 - 500 rpm CLV, Approx.

CIRC (Cross Interleave Reed-

Solomon Code)

Quantization:

D/A converter:

Filter:

Frequency response:

Signal/noise ratio:

Dynamic range:

Wow and flutter:

16-bit linear

1-bit

4-times oversampling digital filter

20 - 20,000 Hz

95 dB (1 kHz)

90 dB (1 kHz)

Unmeasurable

(less than 0.001% W. peak)

(Tuner section)

Frequency range:

FM; 87.5 - 108 MHz

AM; 530 - 1,720 kHz

FM; 8.0 µV (75 ohms, unbalanced)

AM; 650 µV/m

Sensitivity:

*35-40

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

*35-40

98.6.23, 10:11 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CALLING FOR SERVICE

For location of the nearest Sharp Authorized Service, or to obtain product literature,

accessories, supplies or customer assistance, please call 1-800-BE SHARP.

LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the

“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees

that it will at its option, either repair the defect or replace the defective Product or part thereof with a new or

remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth

below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to misuse,

abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and

provide proof of purchase to the servicer.

The limited warranty described above is in addition to whatever implied warranties may be granted to purchasers by

law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do

not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those

described above, or extend the duration of any warranties beyond the time period described below on behalf of Sharp.

The warranties described above shall be the sole and exclusive warranties granted by Sharp and shall be the sole and

exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described

herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect

to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability

or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product

which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall

Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some

states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY

FROM STATE TO STATE.

Product Model Number: See your product for specific model number and have it available when requesting service

for your Product.

Warranty Period for this Product: 1 year parts and labor from the date of purchase.

Excluded from Warranty Coverage: non-functional accessories, supplies and consumable items.

How to Obtain Service: Contact a Servicer. To find the location of the nearest authorized Servicer, call Sharp toll free

at 1-800-BE SHARP. Then, ship prepaid or carry in your Product with proof of purchase to the Servicer. If you ship the

Product, be sure it is insured and packaged securely.

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

SHARP CORPORATION

Printed in Malaysia

TINSE0185AWZZ

B9709.SM

Download from Www.Somanuals.com. All Manuals Search And Download.

Sierra Wireless Network Router Overdrive User Manual
Sony Car Stereo System CDXGT740UI User Manual
Sony Cell Phone Xperia T3 User Manual
Sony Computer Monitor GDM 400PST9 User Manual
Sony Digital Photo Frame 4 155 760 11 1 User Manual
Sony Ericsson Cell Phone W980 User Manual
Sony Personal Computer STR DB900 User Manual
Sony Wok STR DH500 User Manual
Sportline Fitness Electronics 345 User Manual
SunBriteTV Car Satellite TV System SB 2220HD User Manual