4-471-528-11 (1)
Data
Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick Reference Manual
thoroughly and retain it for future reference.
VPL-DX146/DX126
VPL-DW126
Not all models are available in all countries and area. Please check
with your local Sony Authorized Dealer.
© 2013 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
3
B Overview
Location and Function of Controls
Main Unit
qk
1
qj
2
qa
qs
qd
qh
3
4
5
0
qg
qf
6
7
8
l Security bar
Connects to a commercially available
security chain or wire.
m Security lock
9
Connects to an optional security cable
manufactured by Kensington.
For details, visit Kensington’s web site.
c Lens
o Ventilation holes (intake)
p Speaker
d Remote control detector
q LAMP/COVER indicator
g Air filter cover/Ventilation holes
r ON/STANDBY indicator
j Ventilation holes (exhaust)
Caution
Do not place anything near the ventilation
holes as this may cause internal heat
buildup. Do not place your hand near the
ventilation holes and the circumference as
this may cause injury.
4
Location and Function of Controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector Panel
3
1
7 2 4 6
3
5
Input (pages 8, 10)
Others
a INPUT A
Video: RGB/YPBPR input connector
Audio: Audio input connector
e AC IN (∼) socket
Connects the supplied AC power cord.
b INPUT B
f USB connector (Type A) (
)
Video: HDMI input connector
Audio: HDMI input connector
g USB connector (Type B) (
)
c VIDEO
Video: Video input connector
Audio: Audio input connector
Note
The audio inputs of INPUT A and VIDEO are
shared.
Remote Commander and Control Panel Keys
Remote Commander
Control Panel Keys
1
2
3
6
7
4
1
6
INPUT
MENU
APA
ECO MODE
2
RESET
3
ENTER
a Turning on the power/Going to
standby mode
RETURN
PATTERN
FREEZE
ASPECT KEYSTONE
?/1 (On/Standby) key
4
BLANK
5
D
ZOOM VOLUME
MUTING
b Selecting an input signal
INPUT key
Location and Function of Controls
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU key
Notes
*1: Use this key when inputting a
computer signal. But it may not be
used depending on the resolution of
the input signal.
RESET key
ENTER /V/v/B/b (arrow) keys
RETURN key
*2: Use this key when inputting a
computer signal.You cannot use this
key when “Type A USB”, “Type B
USB” or “Network” is selected as the
input.
ASPECT key (page 19)
KEYSTONE key (page 15)
*
f Setting the energy–saving mode
APA (Auto Pixel Alignment) key
easily
Note
ECO MODE key
Energy-saving mode can be set easily.
Energy-saving mode consists of “Lamp
Mode,” “With No Input,” “With Static
Signal” and “Standby Mode.”
* Use this key when inputting a computer
signal via the RGB input connector
(INPUT A).
e Using various functions during
1 Press the ECO MODE key to display
the ECO Mode menu.
projecting
*1
ECO Mode Menu
D ZOOM (Digital Zoom) +/– key
Enlarges the image with the center of it
as a starting point while projecting.
ECO Mode
ECO
User
1 Press the D ZOOM + key to display
the digital zoom icon on the projected
image.
RETURN
:Sel
:Back
2 Press the V/v/B/b keys to move the
digital zoom icon to the point on the
image you want to enlarge.
3 Press the D ZOOM + key or the D
ZOOM – key repeatedly to change the
enlargement ratio. The image can be
enlarged up to 4 times.
2 Press the V/v key or ECO MODE key
to select “ECO” or “User” mode.
ECO: Sets each mode to the optimum
energy-saving value.
Lamp Mode: Low
With No Input: Standby
With Static Signal: Lamp
Dimming
Press the RESET key to restore the
previous image.
Standby Mode: Low
BLANK key
User: Sets each item of the ECO
mode menu as you desire (go to
step 3).
Cuts off the projected image
temporarily. Press again to restore the
previous image. Picture muting helps
reduce power consumption.
MUTING key
Mutes the audio output temporarily.
Press again to restore the previous
volume.
VOLUME +/– key
Adjusts the volume output.
*2
FREEZE key
Pauses a projected image. Press again to
restore the image.
6
Location and Function of Controls
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select “User” then press the b key.
The setting items appear.
User
Lamp Mode
High
Auto Power Saving
With No Input
Off
With Static Signal Lamp Dimming
Standard
Standby Mode
:Sel
RETURN :Back
:Set
4 Press the V/v key to select the item
then press the ENTER key.
5 Press the V/v key to select the setting
value.
6 Press the ENTER key.
The screen returns to the previous
menu.
For details on ECO Mode settings, see
“Lamp Mode,” “With No Input,” “With
Static Signal” and “Standby Mode” on
the Connection/Power menu (page 25).
Others
g Infrared transmitter
About remote commander operation
• Direct the remote commander toward the
remote control detector.
• The shorter the distance between the
remote commander and the projector is,
the wider the angle within which the
remote commander can control the
projector becomes.
• Make sure that nothing obstructs the
infrared beam between the remote
commander and the remote control
detector on the projector.
Location and Function of Controls
Download from Www.Somanuals.com. All Manuals Search And Download.
7
B Preparation
Connecting the Projector
Notes
• Make sure all the equipment is powered off when connecting the projector.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or
cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.
• For more information, refer also to the instruction manuals of the equipment you are connecting.
• Use a no-resistance audio cable.
Connecting a Computer
Connection with a computer is explained for each input signal.
INPUT A
For connecting a computer with an RGB output connector.
Mini D-sub 15-pin cable (supplied)
RGB output
connector
Audio output
connector
Computer
Audio cable (Stereo mini plug)
(not supplied)
Note
It is recommended that you set the resolution of your computer to 1024 × 768 pixels (VPL-DX146/
DX126) or 1280 × 800 pixels (VPL-DW126) for the external monitor.
INPUT B
For connecting a computer with an HDMI output connector.
HDMI cable
HDMI output
(not supplied)
connector
Computer
Notes
• Use HDMI-compatible equipment which has the HDMI Logo.
• Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are
recommended.)
• The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal
or CEC (Consumer Electronics Control) Signal.
• It is recommended that you set the resolution of your computer to 1024 × 768 pixels (VPL-DX146/
DX126) or 1280 × 800 pixels (VPL-DW126) for the external monitor.
8
Connecting the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
USB connector (Type B) (
)
For connecting to a computer with a USB connector (“Projecting an Image using USB
Connection” (page 36)).
USBconnector
USB A-B cable (not
supplied)
(Type A)
Computer
LAN connector
For connecting to a computer, tablet PC, or smartphone via a hub or router (“Presentation
LAN
connector
LAN cable (straight type)
(not supplied)
Computer
Wired connection
Tablet PC/Smartphone
Computer
Hub, router (wireless), etc.
Wireless connection
USB connector (Type A) (
)
For connecting a USB wireless LAN module IFU-WLM3 (supplied) (“Presentation Function
via Network” (page 33)).
Tablet PC/Smartphone
USB wireless LAN module
IFU-WLM3 (supplied)
Computer
Notes
• Undesignated USB wireless LAN modules do not work.
• When connecting/disconnecting the USB wireless LAN module, make sure that the projector is in
Standby mode (Standby Mode: “Low”), or the AC power cord is unplugged from the wall outlet.
Connecting the Projector
9
Download from Www.Somanuals.com. All Manuals Search And Download.
• When wirelessly connecting a tablet PC/smartphone to the projector via USB wireless LAN
module IFU-WLM3 (supplied), set “Access Point Setup” to “Manual” in the projector’s “WLAN
Connecting a Video equipment
Connections with a DVD player or BD player are explained for each input signal.
VIDEO
For connecting video equipment with a video output connector.
Video cable (not supplied)
Video output
connector
Audio output
connector
Video equipment
Audio cable (Phono plug × 2 – stereo mini plug) (not supplied)
INPUT A
For connecting video equipment with a YPBPR output connector.
Component – Mini D-sub 15-pin cable (not supplied)
YPBPR output
connector
Audio output
connector
Video equipment
Audio cable (Phono plug × 2 – stereo mini plug) (not supplied)
10 Connecting the Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT B
For connecting video equipment with an HDMI output connector.
HDMI cable
(not supplied)
HDMI output
connector
Video equipment
Notes
• Use HDMI-compatible equipment which has the HDMI Logo.
• Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are
recommended.)
• The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal
or CEC (Consumer Electronics Control) Signal.
Connecting a USB memory device
USB connector (Type A) (
)
For connecting a USB memory device (“Using USB Media Viewer” (page 37)).
USB memory device
(not supplied)
Connecting the Projector 11
Download from Www.Somanuals.com. All Manuals Search And Download.
B Projecting/Adjusting an Image
Projecting an Image
The size of a projected image depends on the distance between the projector and screen. Install
the projector so that the projected image fits the screen size. For details on projection distances
3
5
4
2
Video equipment
Projector
1
6
Wall outlet
Computer
1 Plug the AC power cord into the wall
6 When projecting a computer image,
switch your computer’s output to
external display.
outlet.
The method to switch the output varies
depending on the type of computer.
2 Connect all equipment to the projector
(Example)
3 Press the ?/1 key to turn on the unit.
4 Turn on the connected equipment.
5 Select the input source.
+
To project image files stored in a USB
memory device, see “USB Media
using USB Connection, see “Projecting
an Image using USB Connection”
via Network, see “Presentation Function
Press the INPUT key on the projector to
display the menu for switching input
signal on the screen. Press the INPUT
key repeatedly, or press the V/v key to
select an image to be projected.
12 Projecting an Image
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the tilt of the projector with the foot adjust button/rear feet
(adjustable)
By changing the tilt of the projector with the foot adjust button/rear feet (adjustable), you can
adjust the position of the projected image.
1
Press and hold the foot adjust button,
then lift up the front of the projector to
adjust the angle.
2 When the desired angle is achieved,
release the foot adjust button to lock the
position.
3 Set the angle of the projector precisely
by turning the rear feet (adjustable).
Notes
• Be careful not to let the projector down on your fingers.
• Do not push hard on the top of the projector with the front foot (adjustable) extended.
• Do not forcedly turn the rear feet (adjustable) more than they should be adjusted. Doing so may
break them.
Changing the aspect ratio of the projected image
Press the ASPECT key on the remote commander to change the aspect ratio of the projected
14 Projecting an Image
Download from Www.Somanuals.com. All Manuals Search And Download.
Correcting trapezoidal distortion of the projected image (Keystone feature)
Keystone feature may not work automatically when the screen is tilted. In this case, set
keystone manually.
1 Press the KEYSTONE key on the remote
commander or select V Keystone in the
Installation menu.
2 Use the V/v/B/b the keys to set the value.
The higher the value, the narrower the top
of the projected image. The lower the
value, the narrower the bottom.
Increase the number
towards plus
Note
Since the Keystone adjustment is an electronic
correction, the image may be deteriorated.
Increase the number
towards minus
Displaying a pattern
You can display a pattern for adjusting the projected image or a grid pattern with the PATTERN
key on the remote commander. Press the PATTERN key again to restore the previous image.
You can use a grid pattern as a guide to write text or to draw lines and shapes on the whiteboard
or blackboard without using a computer.
Note
You cannot use this key when “Type A USB”, “Type B USB” or “Network” is selected as the input.
Automatically adjusts Phase, Pitch and Shift of projected image while a
signal is input from a computer (APA (Auto Pixel Alignment))
Press the APA key on the remote commander. Press again to cancel adjusting during the setting.
to “On”, executes APA automatically when a signal is input (page 23).
Projecting an Image 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning Off the Power
1 Press the ?/1 key on the unit or the remote commander.
The projector starts shutdown and turns off. If you press the ?/1 key within 10 seconds of
the message being displayed, shutdown is canceled.
2 Unplug the AC power cord from the wall outlet.
To turn off without displaying confirmation message
ECO gauge
This gauge indicates the current effectiveness of the projector’s ECO function.
The leaf icons are displayed when the projector is shut down. The number of displayed icons
varies according to how much energy is saved as a result of using the ECO function.
ECO gauge
16 Projecting an Image
Download from Www.Somanuals.com. All Manuals Search And Download.
B Adjustments and Settings Using a Menu
Using a MENU
Note
The menu displays used for the explanation below may be different depending on the model you are
using.
operations in step 3 and then press the
1 Press the MENU key to display the
ENTER key to register the setting.
To return to the selection screen of the
setting items, press the B or RETURN
key. As an aid to setting or adjusting
items, you can press the RESET key to
return an item to its factory setting.
menu.
2 Select the setting menu.
Use the V/v key to select the setting
menu then press the b key or ENTER
key.
Setting menu
Using a pop-up menu
Press the V/v/B/b key to select an item.
A selected item takes effect
immediately, except “Language”, which
will take effect after you press the
ENTER key.
Picture
Picture Mode
Reset
Contrast
Brightness
Color
Hue
Color Temp.
Sharpness
Expert Setting
Standard
Low
5
Picture Mode
Dynamic
Standard
:Sel
:Set
:Back
Presentation
Blackboard
Game
Cinema
3 Select the setting item.
Use the V/v key to select the setting
menu then press the b key or ENTER
key.
:Sel
RETURN :Back
Using the setting menu
Press the V/v key to select the item.
A selected item takes effect
immediately. The previous screen is
restored.
Using the adjustment menu
To increase the value, press the V/b key
and to decrease the number, press the
v/B key. If you press the ENTER key,
the selected item takes effect
immediately. The previous screen is
restored.
To return to the selection screen of the
setting menu, press the B or RETURN
key.
Setting items
Picture
Picture Mode
Reset
Standard
Contrast
Brightness
Color
80
50
50
50
Hue
Color Temp.
Sharpness
Expert Setting
Low
5
Contrast
:Sel
:Set
:Back
Back
Adjust
4 Make the setting or adjustment for the
selected item.
5 Press the MENU key to clear the
The setting method varies, depending on
the setting item.
If the next menu window is displayed,
select the item according to the
menu.
The menu disappears automatically if no
operation is performed.
Using a MENU 17
Download from Www.Somanuals.com. All Manuals Search And Download.
The Picture Menu
The Picture is used to adjust the picture for each input signal.
Items
Item descriptions
Picture Mode
Dynamic: Emphasizes the contrast to produce a dynamic and vivid picture.
Standard: Provides an image which is natural and well balanced.
*1
Presentation : Provides a bright image, suitable for presentations.
Blackboard: Provides an image suitable for displaying on a blackboard.
Game: Provides an image suitable for viewing games.
Cinema: Provides an image suitable for viewing movies.
*2
Reset
Resets to the factory setting.
Contrast
The higher the value, the greater the contrast. The lower the value, the lower
the contrast.
Brightness
The higher the value, the brighter the picture. The lower the value, the darker
the picture.
*3 *4
Color
The higher the value, the greater the intensity. The lower the value, the lower
the intensity.
*3 *4 *5
Hue
The higher the value, the more greenish the picture becomes. The lower the
value, the more reddish the picture becomes.
*6
Color Temp.
Sharpness
High/Middle/Low: The higher the value, the more bluish the picture
becomes. The lower the value, the more reddish the picture becomes.
The higher the value, the sharper the picture becomes. The lower the value, the
softer the picture becomes.
Expert Setting
Gamma
Graphics 1: Gamma correction to make halftones brighter. This setting is
suitable when projecting highly colorful images, such as photos, in a bright
place.
*1 *7
Mode
Graphics 2: Gamma correction to improve the reproduction of halftones.
Highly colorful images, such as photos, can be reproduced in natural tones.
Text: Improves back and white contrast. Suitable for images with lots of text
content.
Notes
*1: When a computer signal is input, this option is available.
*2: The settings in the Picture return to their factory defaults, except for Picture Mode.
*3: When a video signal is input, this option is available.
*4: When the signal without color burst signal is input, this option is unavailable.
*5: When an analog TV signal is input, this option may not available, depending on the color system.
*6: When “Picture Mode” is set to the item other than “Presentation” or “Blackboard,” this option
is available.
*7: When “Picture Mode” is set to “Blackboard,” this option is unavailable.
18 The Picture Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
The Screen Menu
The Screen menu is used to adjust the size, position and aspect ratio of the projected image for
each input signal.
Items
Item descriptions
*1
Aspect
VPL-DX146/DX126: 4:3: Displays the image to fit the maximum projected image size
When the computer
signal is input
with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 16:9.
Full 1: Displays the image to fit the maximum projected image
size without changing the aspect ratio of the input signal.
Normal: Displays the image on the center position of the
projected image without changing the resolution of the input
signal or enlarging the image.
VPL-DX146/DX126: 4:3: Displays the image to fit the maximum projected image size
When the video signal with an aspect ratio fixed to 4:3.
is input
16:9: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 16:9.
Zoom: Zooms the center area of a projected image.
VPL-DW126: When
4:3: Displays the image to fit the maximum projected image size
the computer signal is with an aspect ratio fixed to 4:3.
input
16:9: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 16:9.
Full 1: Displays the image to fit the maximum projected image
size without changing the aspect ratio of the input signal.
Full 2: Displays the image to fit the maximum projected image
size changing the aspect ratio of the input signal.
Full 3: Displays the image to fit the maximum width or height, up
to 1280 × 720 pixels, without changing the aspect ratio of the
input signal.
Normal: Displays the image on the center position of the
projected image without changing the resolution of the input
signal or enlarging the image.
VPL-DW126: When
the video signal is
input
4:3: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected image size
with an aspect ratio fixed to 16:9.
Full: Displays the image to fit the maximum projected image size
changing the aspect ratio of the input signal.
Zoom: Zooms the center area of a projected image.
The Screen Menu 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Items
Item descriptions
Adjust Signal
Adjusts the image of a computer signal. Use this item if the edge
of the image is cut, or is not displayed properly.
*2 *3
APA
Automatically adjusts the projected image to an optimum quality
*2
Phase
Adjusts the dot phase of the display pixel and the input signal. Set
to the value where looks clearest.
*2
Pitch
The higher the value, the wider the horizontal image elements
(pitch). The lower the value, the narrower the horizontal image
elements (pitch).
*4
Shift
H (Horizontal): The higher the value, the farther right the image
is projected on the screen. The lower the value, the image farther
left.
V (Vertical): The higher the value, the farther up the image is
projected on the screen. The lower the value, the image farther
down.
Notes
*1: • Note that if the projector is used for profit or for public viewing, modifying the original picture
by switching to the aspect mode may constitute an infringement of the rights of authors or
producers, which are legally protected.
• Depending on the input signal, setting items for aspect ratio or some other setting items cannot
be set in some cases, or changing the aspect ratio setting may have no effect.
• A part of the image may be displayed in black, depending on the setting item.
*2: Available when a computer signal is input from the RGB input connector (INPUT A).
*3: If the projected image includes large amount of black portion around it, the APA function will
not work properly and a part of the image may not be displayed on the screen and also optimum
image cannot be obtained, depending on the type of input signal. In this case, adjust the “Phase,”
“Pitch,” and “Shift” items manually.
*4: Available when a computer or a video signal is input from the RGB/YPBPR input connector
(INPUT A).
20 The Screen Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Aspect
*1: If you select “Normal,” the image is
projected in the same resolution as the
input signal without changing the aspect
ratio of the original image.
VPL-DX146/DX126
Input signal
Recommended
setting value and
projected image
*1
4:3
Full1
*2: If you select “4:3,” the image is projected
to fit the projected image size, regardless
of the aspect ratio of the image.
*1 *2
16:9
Full1
*3: Depending on the input signal, the
projected image may be projected as
illustrated below. In this case, select
“16:9.”
*1 *2
16:10
Full1
*3
4:3
4:3
*4: Depending on the input signal, the
projected image may be projected as
illustrated below. In this case, select
“Zoom.”
*4
16:9
16:9
The Screen Menu 21
Download from Www.Somanuals.com. All Manuals Search And Download.
*1: If you select “Normal,” the image is
projected in the same resolution as the
input signal without changing the aspect
ratio of the original image.
VPL-DW126
Input signal
Recommended
setting value and
projected image
*1 *2 *3
4:3
Full1
*2: If you select “Full2,” the image is projected
to fit the projected image size, regardless
of the aspect ratio of the image.
*1 *2 *3
16:9
Full1
*3: If you adjust the projected image position
using an image with 16:9 aspect ratio and
then switch the input source to 4:3 image,
the top and bottom edge of the image may
be hidden. In this case, select “Full3.”
*3
16:10
Full1
*4 *5
4:3
4:3
*4: Depending on the input signal, the
projected image may be projected as
illustrated below. In this case, select
“16:9.”
16:9
16:9
*5: Depending on the input signal, the image
may be projected as illustrated below. In
this case, select “Zoom.”
22 The Screen Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
The Function Menu
The Function menu is used for setting various functions of the projector.
Items
Item descriptions
Volume
The higher the value, the louder an audio volume and the lower the
value, the lower the audio volume.
Smart APA
CC Display
On/Off: When set to “On,” APA functions automatically when a
*1
signal is input.
Off: Closed caption does not appear.
CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed
caption service (captions or text).
Lamp Timer Reset
Start Up Image
On/Off: When set to “On,” the Start Up Image is displayed on the
screen when the projector is powered on.
Note
*1: APA functions when a computer signal is input via the RGB input connector (INPUT A).
The Function Menu 23
Download from Www.Somanuals.com. All Manuals Search And Download.
The Operation Menu
The Operation menu is used for setting for the operations by using the menu or the remote
commander.
Items
Item descriptions
Language
Status
Selects the language used in the menu and messages.
On: All on-screen statuses are enabled.
Off: Turns off the on-screen displays, except for menus, warning messages
and messages from the message list.
*1
Security Lock
On/Off: This function enables restriction of the projector to authorized users
by password. The setting procedures for security locking are as follows:
1 Select “On” and press the ENTER key to display the setting menu.
2 Input the password with the MENU, V/v/B/b and ENTER keys. (The
default setting password is “ENTER, ENTER, ENTER, ENTER.”)
3 Input a new password with the MENU, V/v/B/b and ENTER keys.
4 Enter the password again to confirm.
Enter the password when you turn on the projector after disconnecting and
reconnecting the AC power cord.
When it is set to “Off,” you can cancel the security lock. You are required to
input the password again.
If you fail to enter the correct password after three consecutive times, the
projector cannot be used. In this case, press the ?/1 key to go Standby mode
then turn on the power again.
Control Key
Lock
On/Off: When set to “On,” locks all the control panel keys of the projector.
However, you can operate the following when set to “On”:
• Press and hold the ?/1 key for approximately 10 seconds during Standby
mode.
c The projector turns on.
• Press and hold the MENU key for approximately 10 seconds during power
on.
c “Control Key Lock” is set to “Off” and enables operation of all keys on
the projector.
Note
*1: You will not be able to use the projector if you forget your password. If you call qualified Sony
personnel because you have forgotten the password, you will be asked to verify the projector’s
serial number and your identity. (This process may differ in other countries/regions.) Once your
identity has been confirmed, we will provide you with the password.
24 The Operation Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
The Connection/Power Menu
The Connection/Power menu is used for setting for the connections and power.
Items
Item descriptions
LAN Settings
IP Address
Setup
Auto (DHCP): The IP address is assigned automatically from the
DHCP server such as a router.
*9
Manual: To specify the IP Address manually.
*10
WLAN Settings
WLAN
Connection
On/Off: Set the wireless output of the USB wireless LAN module
(supplied) to On/Off.
*8
*11
Access Point
Setup
Auto/Manual : Set the access point automatically or manually.
*1
Input-A Signal Sel.
Auto/Computer/Video GBR/Component: When set to “Auto,” selects
the type of video signal input automatically when “Input-A” is selected.
ECO
*5 *7
Lamp Mode
High/Standard/Low/Auto
: When set to “High,” the image
becomes brighter, and power consumption becomes higher. When set to
“Low,” power consumption is minimized; however, the image will be
darker. When set to “Auto,” brightness is adjusted automatically
according to image content. Dark images are projected with brightness
adjusted, leading to energy-saving. Bright images are projected
brightly, without adjusting brightness.
Auto Power Saving
With No Input
Lamp Cutoff: The lamp turns off automatically and power
consumption is reduced if no signal is input for more than 10 minutes.
The lamp lights again when a signal is input or any key is pressed. In
Lamp Cutoff, the ON/STANDBY indicator lights in orange. (page 41)
*2
Standby : If no signal is input to the unit for more than 10 minutes,
the power turns off automatically, and the unit enters standby mode.
Off: You can deactivate the With No Input.
*4 *5 *7
With Static
Signal
Lamp Dimming
: If an image does not change for about
10 seconds, lamp output is gradually reduced (approximately 10% to
15% ) from that set in the Lamp Mode. Automatically the lamp slowly
*3
darkens to approximately 30% of its lamp output according to the
selected time (with no change to input signal) “5,” “10,” “15,” “20”
minutes or “Demo.,” While dimming the lamp, the message “Lamp
Dimming” appears. If you select “Demo.,” the image will start to
darken about 40 seconds later. When any change in signal is detected,
or an operation (remote control or control panel) is performed, normal
brightness is restored.
Off: You can deactivate the With Static Signal.
*6
Standby Mode
Standard/Low: When set to “Low,” lowers power consumption in
Standby mode.
The Connection/Power Menu 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Items
Item descriptions
Direct Power On
On/Off: When set to “On,” you can turn the power on without going to
Standby mode when the AC power cord is connected to a wall outlet.
With the projector turned off, you can also unplug the AC power cord
without going to Standby mode, regardless of the Direct Power On
setting.
Notes
*1: This may not be optimum depending on the input signal. In this case, set manually according
to the connected equipment.
*2: Select “Off” to avoid entering standby mode when there is no input signal.
*3: This varies depending on the “Lamp Mode” setting.
*4: As the lamp is dimmed gradually, you may not notice any change in brightness. You might only
notice that the lamp has dimmed when its brightness is restored after there is a change in input
signal.
*5: This mode does not work for about three minutes after the lamp lights. A change in signal may
not be detected depending on the input image. The lamp may become brighter at intervals if
you continue to use the projector during lamp dimming. However, this is not a malfunction. If
With No Input is set, it takes priority.
*6: When “Standby Mode” is set to “Low,” the network and network control function cannot be
operated while the projector is in standby mode.
*7: Does not function when “Type A USB”, “Type B USB” or “Network” is selected as the input.
In this case, it becomes equivalent to “Standard.”
*8: Reflecting changes in WLAN settings may take a few moments.
*9: To set the IP address manually, select “Manual”, press “Apply”, then enter the IP address.
wireless LAN module IFU-WLM3 (supplied) can be used as a wireless access point.
*11: The factory default settings for “Manual” are as follows.
SSID: VPL + MAC address for LAN
Security Method: WEP(64bit)
Password: sony1
To change the settings for “Manual”, use a web browser.
Connect” to connect to the network.
26 The Connection/Power Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
The Installation Menu
The Installation menu is used for installing the projector.
Items
Item descriptions
Image Flip
HV/H/V/Off: Flips the projected image horizontally or vertically
according to the installation method.
Installation Attitude Right Side Up/Upside Down/Link to Image Flip: Change the cooling
setting to suit to the installation attitude. When set to “Link to Image Flip,”
the cooling setting changes based on the setting of “Image Flip.”
Continuing to use the wrong setting may affect component reliability.
High Altitude
Mode
On/Off: Set to “On” when using the projector at an altitude of 1,500 m or
higher. Continuing to use the wrong setting may affect component
reliability.
*1
*2
*2
V keystone
Auto/Manual : The higher the value, the narrower the top of the
projected image. The lower the value, the narrower the bottom.
Notes
*1: When “High Altitude Mode” is set to “On,” the speed of the fan increases, and the fan noise
becomes slightly louder.
*2: Since the Keystone adjustment is an electronic correction, the image may be deteriorated.
The Installation Menu 27
Download from Www.Somanuals.com. All Manuals Search And Download.
The Information Menu
The Information menu is used to check projector status, such as total usage time of the lamp.
Items
Item descriptions
Model Name
Serial No.
Displays the model name.
Displays the serial number.
*1
fH/fV
Displays the horizontal/vertical frequency of the current input signal.
Displays the type of the current input signal.
Indicates the total usage time of a lamp.
Signal Type
Lamp Timer
Note
*1: These items may not be displayed depending on the input signal.
28 The Information Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
B Network
Using Network Features
Connection to the network allows you to operate the following features:
• Checking the current status of the projector via a Web browser.
• Remotely controlling the projector via a Web browser.
• Receiving the e-mail report via the projector.
• Making the network settings for the projector.
• Displaying messages on the projected image using an application.
• Supports network monitoring, control protocol (Advertisement, PJ Talk, PJ Link, AMX
DDDP [Dynamic Device Discovery Protocol], Crestron RoomView).
Notes
• The menu displays used for the explanation below may be different depending on the model you
are using.
• Supported Web browsers are Internet Explorer 6/7/8/9/10.
• The menu displays only in English.
• If the browser of your computer is set to [Use a proxy server] when you access to the projector
from your computer, click the check mark to set accessing without using a proxy server.
• To display messages, specific application Projector Station for Network Control (Version 1.1 or
later) is necessary. For download or detailed method of using Projector Station for Network
Control, please access the following URL.
Contact your local Sony dealer for detailed information of Projector Station for Network Control.
Displaying the Control Window of the Projector with a Web
Browser
2 Set the network settings for the
projector using “LAN Settings” on the
3 Start a web browser on the computer,
enter the following in the address field,
then press the Enter key on your
computer.
Once you make the network settings,
(xxx.xxx.xxx.xxx: IP address for the
you can open the Control window only
projector)
by performing step 3 of this procedure.
You can confirm the IP address of the
projector in the “LAN Settings” on the
The following window appears in the
Web browser:
Using Network Features 29
Download from Www.Somanuals.com. All Manuals Search And Download.
How to operate the Control window
Confirming the Information
regarding the Projector
Switching the page
Click one of the Page Switching buttons to
display the desired setting page.
You can confirm the current settings for the
projector on the Information page.
Page Switching buttons
Setting the access limitation
You can limit a user for accessing any
particular page.
Information area
Administrator: Allowed access to all
pages
User: Allowed access to all pages except
the Setup page
Set the access limitation from [Password] of
the Setup page.
When you access the Setup page for the first
time, enter “root” for user name and enter
nothing for password.
Operating the Projector from
a Computer
You can control the projector from the
computer on the Control page.
The name of the administrator is preset to
“root.”
Operation area
Entry area for [Administrator]
Entry area for [User]
The functions of the buttons shown in the
operation area are the same as the keys on
the remote commander.
When you change the password, input a new
password after deleting the password
(*****) that was set.
Note
If you forget your password, consult with
qualified Sony personnel.
30 Using Network Features
Download from Www.Somanuals.com. All Manuals Search And Download.
Mail Report button
Using the e-mail report
Function
Set the e-mail report function on the Setup
page.
2
Entered values will not be applied unless
you click on [Apply].
1 Click on [Owner information] to enter
the owner information recorded in the
e-mail report.
3
4
6
5
3 Enter the outgoing e-mail address in
the Email Address box then check the
Report Timing check box of the e-mail
report to be sent.
1
Owner information button
2 Set the timing of the e-mail report.
Click on [Mail Report] to open the Mail
Report page.
4 Set the mail account for sending e-
Lamp Reminder (Lamp1): Set the
timing of the email report for lamp
replacement. To reset Lamp
Reminder, execute “Lamp Timer
Maintenance Reminder: Set the timing
of the email report for maintenance. To
reset Maintenance Reminder, check
the RESET check box and then click
on [Apply].
mail reports.
Mail Address: Enter the e-mail address.
Outgoing Mail Server (SMTP): Enter
the address of outgoing mail server
(SMTP).
Required Authentication: Check this
check box if authentication is required
for sending e-mail.
Requires the use of POP
Authentication before sending email
(POP before SMTP): Check this
check box to arrange for POP
authentication to be performed before
sending e-mail.
Incoming Mail Server (POP3): Enter
the address of the incoming-mail
server (POP3) to be used for POP
authentication.
Account Name: Enter the mail account
name.
Password: Enter the password.
Using Network Features 31
Download from Www.Somanuals.com. All Manuals Search And Download.
SMTP Authentication: Check this
check box to arrange for SMTP
authentication to be performed before
sending e-mail.
Account Name: Enter the mail account
name.
Password: Enter the password.
5 Confirm the contents of the e-mail
report.
When you click on [View], the contents
of the e-mail report are displayed.
6 Send the test mail.
Check on the Send test mail check box
then click on [Apply] to send your test
mail to the e-mail address you set.
Notes
• The email report function will not work if the
network uses Outbound Port25 blocking,
which prevents access to the SMTP server.
• You cannot use the following characters to
enter the characters in the text box: “ ' ”, “ “
”, “ \ ”, “ & ”, “ < ”, “ > ”
32 Using Network Features
Download from Www.Somanuals.com. All Manuals Search And Download.
B Presentation Function via Network
Using Presentation Function via Network
The Presentation Function via Network enables you to do the following:
• Connect a maximum of 8 computers to the projector.
• Project images from a maximum of 4 computers simultaneously.
• Connecting a USB wireless LAN module (supplied) to the projector allows the projector to
connect to up to 7 computers simultaneously.
Presentation Function via Network requires installation of Projector Station for Network
Presentation (supplied CD-ROM). For information on updates of Projector Station for Network
System requirements for using the application are as follows.
OS
WindowsXP: Home/Professional (recommended)
WindowsVista: Home Premium/Business/Ultimate/Enterprise
Windows7: Home Premium/Professional (Recommended)/Ultimate/Enterprise
CPU
Pentium4 2.8GHz or faster
Notes
• To install the application, administrative rights are required.
• If you do not have administrative rights, the application may not run properly.
• If firewall or security software is installed, the application may not run properly.
• Depending on the type of network adapter, the application may not run properly.
• Movie player (Media Player, etc.) images may not be projected properly.
Installing Projector Station
for Network Presentation
Starting Projector Station for
Network Presentation
1 Close all running applications.
1 Connect the projector to a network.
For a wired connection, connect the
projector by a LAN cable, then make the
2 Insert the supplied CD-ROM into the
CD-ROM drive of the computer.
For a wireless connection, see “LAN
3 Open the CD-ROM and double-click
the .exe file.
(Type A) (
When the message “User Account
Control” is displayed, click “Allow” or
“Yes.”
2 Turn on the projector.
Select “Network” as the input source
4 Follow the on-screen instructions to
install the software.
3 Start Projector Station for Network
Presentation.
Select [Start]-[All Programs]-[Projector
Station for Network Presentation] on the
computer.
Using Presentation Function via Network 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Projecting an Image
Display related settings (such as your
computer’s resolution) change when the
application is started.
After starting Projector Station for Network
Presentation, the connection setting window
appears.
Connection Settings
1 Find projectors connected to the
network.
Item
Item descriptions
Click “Search” in the connection setting
window to search for projectors.
Wireless LAN To select a wireless LAN
Adapter
adapter used for Projector
Station for Network
Presentation (appears only
when wireless connection is
used).
Connection
History
List profiles that have been
connected before.
Search Results Show the search result.
Profile Name
Display the registered names
of the projectors found in the
network.
Connection
Display the connection
method (wired/wireless).
Displays the strength of the
wireless signal (appears only
when wireless connection is
used).
Notes
• The appearance of the application on the
screen is subject to change without notice.
• When a projector is connected to a network
via a wireless connection, if the “SSID” is
changed from the factory default, it may not
be found.
• When a projector is connected to a network
via a wired connection, depending on the
network environment, it may not be found.
• When connecting a projector with its
“SSID”, “Security Method” and “Wireless
Password” in the “Wireless LAN Setting”
changed, select “Manual Connect” and
connect manually.
SSID
Display SSID (appears only
when wireless connection is
used).
IP Address
Search
Display IP address (appears
only when wired connection
is used).
Start searching for projectors
in the network.
Delete
Delete selected profile.
Property
Display the properties of the
selected profile.
Connect
Connect to the selected
projector and start projecting
an image.
2 Select a projector to project an image.
Check the checkbox.
Manual
Connect
Enter the SSID and IP
address manually to connect
with the projector, and start
projecting an image.
3 Click “Connect”.
If other users are projecting an image,
the controller appears on the screen.
Click the
to start projecting an
image (page 35).
If no users are projecting an image, the
controller appears on the screen and
starts projecting an image.
34 Using Presentation Function via Network
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Controller
Displaying Images or Files
Sent from a Tablet PC/
Smartphone
Network
Presentation
You can project JPEG images, PDF files, etc.
stored in a tablet PC/smartphone wirelessly
*1
by using a specific application.
*2
For downloading or detailed method of
using the application, access the following
URL.
User 000001
8
Items
Functions
Start projecting an image.
Pause projecting an image.
*1: To use the application, one of the following
conditions is required.
Stop projecting an image
(screen turns black).
• Connected to network where wireless
• Connected to a wireless network via USB
wireless LAN module IFU-WLM3
(supplied) that is connected to the
projector (page 9).
Change the application
settings.
Disconnect from the
projector.
Select a projection method
then start projecting an
image.
*2: Depending on your Internet connection, a
data communication fee for downloading
the application may apply.
Projection
method
Not projecting an image.
Project in full screen.
Project in the left half of
the screen.
Project in the right half of
the screen.
Project in the upper left
quadrant of the screen.
Project in the upper right
quadrant of the screen.
Project in the lower left
quadrant of the screen.
Project in the lower right
quadrant of the screen.
Display the strength of the
wireless signal.
Display the number of
users connected to the
projector.
Display the users’ status.
Using Presentation Function via Network 35
Download from Www.Somanuals.com. All Manuals Search And Download.
B Projecting an Image using USB Connection
Projecting an Image using USB Connection
You can also project an image simply by connecting the projector and computer with a USB A-
B cable (not supplied).
Projecting an image using USB connection requires to start USB Display.
System requirements for using the application are as follows.
OS
WindowsXP: Home/Professional (recommended)
WindowsVista: Home Premium/Business/Ultimate/Enterprise
Windows7: Home Premium/Professional (Recommended)/Ultimate/Enterprise
CPU
Pentium4 2.8GHz or faster
Starting USB Display
1 Connecting the projector and your computer with a USB A-B cable (not supplied)
2 Turn on the projector.
recognized as a CD-ROM drive in the computer.
3 Open “USB Display” in the CD-ROM drive.
Notes
• The resolution of your computer changes when the application is started.
• Depending of the computer’s setting, the application may start automatically.
• When you are finished using the projector, you can simply disconnect the USB cable without using
the Safely Remove Hardware option.
• Movie player (Media Player, etc.) images may not be projected properly.
Projecting an Image
Using the Controller
After starting USB Display, the controller
appears on the screen, and projection starts
automatically.
USB Display
Items
Functions
Start projecting an image.
Pause projecting an image.
Stop projecting an image
(the screen turns black).
Display information about
USB Display.
36 Projecting an Image using USB Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
B USB Media Viewer
Using USB Media Viewer
You can browse image files stored in a USB memory device inserted in the USB connector of
the projector, without using a computer.
Supported storage media and file format:
• Supported storage media: USB flash memory
• Supported format of storage media: FAT format
• Supported file format: JPEG (.jpg/.jpeg), Bitmap (.bmp), PNG (.png), GIF (.gif), TIFF (.tif/.tiff)
Notes
• exFAT, NTFS are not supported.
• TIFF files containing EXIF information are not supported.
• Image files in a USB memory device connected to the projector via a USB hub may not be
displayed.
• Security protected USB memory may not function correctly.
• A USB memory card reader that is recognized as more than one drive may not function correctly.
• Display of image files that are larger than 4092 × 3072 pixels is not guaranteed. It may take a long
time to display, or may not be displayed.
• A folder with a deep folder structure or with a very long folder name may not be displayed.
• An image may not be displayed, depending on its file type.
• Files or folders with names including non-alphanumeric characters may not be displayed.
• When displaying an image file, do not disconnect the USB memory device. It may cause a
malfunction of the USB memory device or the projector. Disconnect the USB memory device
when the USB Memory device selection screen is displayed.
3 Select the USB Memory device.
Press the ENTER key to display in the thumbnail mode.
USB Media Viewer has three display modes: “thumbnail mode,” “display mode” and
“slideshow mode.”
Using USB Media Viewer 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Thumbnail Mode
The image files in the folder are displayed as a thumbnail list.
Option menu
Press the V/v/B/b key on the remote commander to select an image, then press the ENTER
key. The option menu appears in the lower part of the screen.
Option Menu
You can select the display order of thumbnails and display method of image files.
Items
Item descriptions
Hide the option menu.
Switch to the display mode, and display the selected image in full screen
view. (page 39)
Switch to the slideshow mode, and start the slideshow from the selected
image. (page 39)
a
z
Sort image files.
Sort image files
a
z
Sort by name in alphabetical order.
z
a
Sort by name in reverse alphabetical order.
Sort by date in chronological order.
1
2
2
1
Sort by date in reverse chronological order.
Notes
• Files without thumbnail data (including those created by an application) appear as blank icons.
• Cannot display more than 200 image files and folders in one folder.
38 Using USB Media Viewer
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Mode
In display mode, you can view a selected image in full screen view.
Option menu
Press the ENTER key on the remote commander. The option menu appears in the lower part of
the screen.
Option Menu
Items
Item descriptions
Hide the option menu.
Rotate the image 90 degrees counter-clockwise.
Rotate the image 90 degrees clockwise.
Switch to the slideshow mode, and start the slideshow from the selected
image. (page 39)
Display the previous image.
Display the next image.
Slideshow Mode
In slideshow mode, you can view images as a slideshow.
Option menu
Press ENTER key on the remote commander. The slideshow pauses and the option menu
appears in the lower part of the screen.
Using USB Media Viewer 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Option Menu
Items
Item descriptions
Hide the option menu.
Display the previous image.
Display the next image.
3
Press the V/v key to change the slideshow time interval.
Slideshow time interval
3
After 3 seconds, display the next image.
5
After 5 seconds, display the next image.
After 10 seconds, display the next image.
Press the V/v key to change the slideshow effect.
10
Slideshow effect
The next image appears with tile transition effect.
The next image appears from the left side of the screen.
The next image appears from the right side of the screen.
The next image appears from the top of the screen.
The next image appears from the bottom of the screen.
Press the V/v key to change the slideshow repeat setting.
On
Repeat Setting
On
After displaying the last image, the slideshow starts from the first image
again.
Off
After displaying the last image, the slideshow ends and returns to the
thumbnail mode.
40 Using USB Media Viewer
Download from Www.Somanuals.com. All Manuals Search And Download.
B Others
Indicators
The indicators allow checking the status and notify you of abnormal operation of the projector.
If the projector exhibits abnormal status, address the problem in accordance with the table
below.
ON/STANDBY indicator
Status
Meaning/Remedies
Lights in red
Flashes in green
The projector is in Standby mode.
• The projector is ready to operate after having been turned on.
• The lamp cools after the projector is turned off.
Lights in green
Lights in orange
Flashes in red
The projector’s power is on.
The projector is in With No Input (Lamp Cutoff). (page 25)
The projector is in abnormal status. Symptoms are indicated by
number of flashes. Address the problem in accordance with the
following. If a symptom persists, despite having taken measures
below, consult with qualified Sony personnel.
Flashes twice
The internal temperature is unusually high. Check the items below.
• Check if the Installation Attitude in the Installation menu is set
correctly. (page 27)
Flashes six times Unplug the AC power cord from a wall outlet. After checking that the
ON/STANDBY indicator goes out, plug the power cord to a wall
outlet again then turn on the projector.
Other number of
flashes
Consult with qualified Sony personnel.
LAMP/COVER indicator
Status
Meaning/Remedies
Flashes in red
Symptoms are indicated by number of flashes. Address the problem in
accordance with the following.
Flashes twice
Flashes three times The temperature of lamp is unusually high. Turn off the power and
wait for lamp to cool then turn on the power again. If the symptom is
shown again, the lamp may be burnt out. In this case, replace the lamp
Indicators 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages List
When any of the messages listed below appears on the projected image, address the problem in
accordance with the table below.
Messages
Meaning/Remedy
Page
High temp.! Lamp off in Check the items below.
1 min.
• Check if nothing is blocking the ventilation holes.
• Check if the air filter is not clogged.
• Check if the Installation Attitude in the Installation menu is
set correctly.
Frequency is out of
range!
Change the output setting of the connected equipment to one
for signals supported by the projector.
Please check Input-A
Signal Sel.
Set “Input-A Signal Sel.” to “Auto” or select the input signal
type to suit to the input signal.
Please clean the filter.
Clean the air filter.
Please replace the Lamp Replace the lamp with a new one and clean the air filter. The
and clean the Filter.
message appears whenever you turn on the power until you
replace the lamp and reset the lamp timer.
Projector temperature is When not using the projector at an altitude of 1,500 m or
high. High Altitude higher, check the items below.
Mode should be “On” if • Check if nothing is blocking the ventilation holes.
Projector is being used
at high altitude.
• Check if the air filter is not clogged.
• Check if Installation Attitude in the Installation menu is set
correctly.
Not applicable!
Invalid key was pressed.
–
The control keys are
locked!
“Control Key Lock” is set to “On.”
Projector will shutdown The ?/1 key was pressed and the projector will be shut down
soon soon. To cancel shutdown, press the ?/1 key again (the
Press ?/1 Key to Restart projector will remain on). To turn off the projector directly,
press and hold the ?/1 key for a few seconds.
Lamp Dimming
Reduces lamp output when “With Static Signal” is set. When
any change in signal is detected, or an operation (remote
control or control panel) is performed, normal brightness is
restored.
42 Messages List
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before asking to have the projector repaired, try to diagnose the problem, following the
instructions below.
Symptoms
Remedy
Page
–
The power is not turned Check if the AC power cord is firmly connected.
on.
When the “Control Key Lock” is set to “On,” you cannot turn
on the projector using the ?/1 key on the projector.
If the lamp or lamp cover is not attached securely, the projector
cannot be turned on.
No image.
Check if the connecting cable is connected to external
equipment firmly.
Check the computer signal is set for output to an external
monitor only. If you set your computer to output to both the
computer’s display and an external monitor, the external
monitor image may not be displayed properly. Set your
computer to output to only an external monitor.
for Network Presentation” is running.
Check if the USB memory device connected to the projector is
compatible with the projector.
Check if the input source is correctly selected.
Check if the picture is muted.
The application “USB
Display” or “Projector
Station for Network
Presentation” does not
start.
Check if the computer connected to the projector meets the
system requirement for the applications.
The computer cannot
connect to the projector.
• Check “LAN Settings” of the projector.
• Check the condition of the wireless connection.
On-screen display does The on-screen display does not appear when “Status” in the
not appear.
Operation menu is set to “Off.”
The aspect ratio of the
display is not right/the
image is displayed
smaller /a portion of
image does not appear.
The image is a
trapezoid.
The images become trapezoidal because of the projection
using a Keystone feature.
When the “V Keystone” is set to “Manual,” the keystone
feature does not work automatically. Set “V Keystone” to
“Auto” or “Manual” to set manually.
When the projector is installed on an uneven surface, the
keystone feature may not work properly. In this case, select
“Manual” to set “V Keystone” manually.
Troubleshooting 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptoms
Remedy
Page
The image is dark/too
bright.
The settings for “Brightness,” “Contrast,” and “Lamp Mode”
affect brightness of the image. Check if the value is
appropriate.
The image will be dark when the lamp is burnt out. Check
“Lamp Timer,” and replace the lamp with a new one if
necessary.
“With Static Signal” is set to “On.”
During picture muting, the lamp is dimmed to reduce power
consumption.
When video signal is not input, the lamp is dimmed to reduce
power consumption.
–
–
The image becomes
darker or brighter.
When the lamp is dimmed for a long time, brightness may
increase temporarily, but this is not malfunction.
When the “Lamp Mode” is set to “Auto,” the luminance of the
lamp changes according to the input image.
The image is not clear.
Check if the projector is in focus.
–
The picture will not be clear if condensation has accumulated
on the lens. In this case, let the projector sit for about two
hours with the power on.
The image is noisy.
No sound.
Check if the connecting cable is connected to the external
equipment properly.
Check that the connecting cables between the projector and
external video or audio equipment are securely connected.
Check if the external audio equipment is set properly.
Audio is not output if audio muting is activated.
Check if the volume is not set to minimum.
–
–
The remote commander Check if the batteries are installed correctly.
does not work.
Check if the batteries are not exhausted.
–
The fan is noisy.
lamp, etc. in the following cases.
• “Lamp Mode” is set to “High.”
• The unit is used at a high altitude. “High Altitude Mode” is
set to “On.”
• The unit is used in the location where the temperature is high.
If the ventilation holes are blocked, the internal temperature of
the projector rises and the fan noise becomes larger.
44 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Lamp
Replace the lamp with a new one if a message displayed on the projected image (page 42).
Use an LMP-D213 projector lamp (not supplied) for replacement.
Caution
1 Turn off the projector, and disconnect
• The lamp remains hot after the projector is
turned off. If you touch the lamp, you may
burn your finger. When you replace the
lamp, wait for at least an hour after
turning off the projector for the lamp to
cool sufficiently.
the AC power cord from a wall outlet.
2 When the lamp has cooled
sufficiently, open the lamp cover by
loosening one screw.
• Do not allow any metallic or inflammable
objects into the lamp replacement slot after
removing the lamp, otherwise it may cause
electrical shock or fire. Do not put your
hands into the slot.
Notes
• If the lamp breaks, contact qualified
Sony personnel. Do not replace the lamp
yourself.
• When removing the lamp, be sure to pull it
out straight, by holding the designated
location. If you touch a part of the lamp other
than the designated location, you may be
burned or injured. If you pull out the lamp
while the projector is tilted, the pieces may
scatter if the lamp breaks any may cause
injury.
Note
For safety reasons, do not loosen any other
screws.
3 Loosen the two screws on the lamp
unit (1). Fold out the handle (2),
then pull out the lamp unit by the
handle (3).
Fold out the handle.
3
1
2
1
Replacing the Lamp 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
6 Connect the AC power cord to a wall
outlet and turn on the projector.
Do not put your hands into the lamp
replacement slot, and do not allow any
liquid or other objects into the slot to avoid
electrical shock or fire.
7 Reset the lamp timer for notification of
the next replacement time.
Select “Lamp Timer Reset” on the
Function menu then press the ENTER
key. When a message appears, select
4 Insert the new lamp all the way in until
it is securely in place (1). Tighten the
two screws (2). Fold down the handle
to replace it (3).
Caution
Disposal of the used lamp
For the customers in the USA
Lamp in this product contains mercury.
Disposal of these materials may be
regulated due to environmental
considerations. For disposal or
recycling information, please contact
your local authorities or the
Telecommunications Industry
Association (www.eiae.org).
Fold down the handle.
1
2
3
2
Notes
• Be careful not to touch the glass surface
of the lamp and a inside conductor.
• Insert the handle firmly to attach it
securely.
• The power will not turn on if the lamp is
not secured properly.
5 Close the lamp cover and tighten the
1 screw.
46 Replacing the Lamp
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Air Filter
When a message appears on the projected image indicating time for a filter cleaning, clean the
If the dust cannot be removed from the air filter even after cleaning, replace the air filter with
a new one. For details on purchasing/fitting a new air filter, consult with the store where you
purchased the projector, or contact qualified Sony personnel.
Caution
If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the
temperature may rise inside the unit, leading to a possible malfunction or fire.
1 Turn off the projector, and disconnect
3 Clean the air filter with a vacuum
the AC power cord from the AC outlet.
cleaner.
Pull out and remove the air filter, and
clean it with a vacuum cleaner.
2 Slide out and remove the air filter
cover from the unit.
Claws
Air filter
Air filter cover
4 Reattach the air filter cover to the unit.
Note
Install the air filter with its open weave side
facing the bottom of the unit, then place the
air filter cover back in the unit.
Cleaning the Air Filter 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Items
Descriptions
Model
VPL-DX146/DX126/VPL-DW126
3 LCD system
Projection system
Display device
Effective display VPL-DX146/DX126: 0.63 inch (16.0 mm),
size
3 plate panels, Aspect ratio 4:3
VPL-DW126: 0.59 inch (15.0 mm), 3 plate panels,
Aspect ratio 16:10
Effective picture VPL-DX146/DX126: 2,359,296 pixels (1024 × 768
elements
pixels, 3 plate panels)
VPL-DW126: 3,072,000 pixels (1280 × 800 pixels,
3 plate panels)
Projection lens
Light source
Zoom
Manual zoom:
VPL-DX146/VPL-DW126: approx.1.3 times
VPL-DX126: approx.1.2 times
Focus
Manual
High-pressure mercury lamp, 210 W type
30 inches to 300 inches (0.76 m to 7.62 m)
Projected image
size
Luminous flux
(Brightness)
VPL-DX146: 3200 lm
VPL-DX126/VPL-DW126: 2600 lm
(when “Lamp Mode” is set to “High”)
Speaker
1 W × 1 (monaural)
Applicable
scanning
frequency
Horizontal: 15 kHz to 92 kHz, Vertical: 48 Hz to 92 Hz
*1
*1
Resolution
When a computer Maximum display resolution: 1600 × 1200 pixels (resize)
signal is input
Panel display resolution:
VPL-DX146/DX126: 1024 × 768 pixels
VPL-DW126: 1280 × 800 pixels
When a video
signal is input
NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p,
576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/60p, 1080/50p
Color system
NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N
48 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Items
Descriptions
Model
VPL-DX146/DX126/VPL-DW126
INPUT OUTPUT INPUT A
(Computer/video)
RGB/YPBPR input connector: Mini D-sub 15 pin
female, G with sync/Y: 1 Vp-p 2 dB, sync negative,
75 ohms terminated, RGB/PBPR: 0.7 Vp-p 2 dB,
75 ohms terminated, Sync signal: TTL level high
impedance, positive/negative
Audio input connector: Stereo mini jack, rated input
500 mVrms, input impedance more than 47 kohms
INPUT B
VIDEO
HDMI input connector: HDMI 19-pin, HDCP, HDMI
audio support
Video input connector: Pin jack, 1 Vp-p 2 dB, sync
negative, 75 ohmes terminated
Audio input connector: Shared with INPUT A
Other connectors
LAN connector: RJ45, 10BASE-T/100BASE-TX
USB connector: Type A
USB connector: Type B
Operating
temperature/
Operating
humidity
0 °C to 35 °C (32 °F to 95 °F)/20% ~ 80% (no
condensation)
Storage
temperature/
Storage humidity
–10 °C to +60 °C (14 °F to 140 °F)/20% to 80% (no
condensation)
Power
100V to 240V AC, 3.0 - 1.2 A, 50/60Hz
requirements
Power
consumption
VPL-DX146:
100V to 120V AC: 291W
220V to 240V AC: 279W
VPL-DX126:
100V to 120V AC: 290W
220V to 240V AC: 278W
VPL-DW126:
100V to 120V AC: 294W
220V to 240V AC: 280W
Standby power
Heat dissipation
100V to 120V AC: 5.7W (when “Standby mode” is set to
“Standard”)/0.4W(when “Standby mode” is set to
“Low”)
220V to 240V AC: 5.9W (when “Standby mode” is set to
“Standard”)/0.5W(when “Standby mode” is set to
“Low”)
VPL-DX146:
100V to 120V AC: 992BTU
220V to 240V AC: 951BTU
VPL-DX126:
100V to 120V AC: 991BTU
220V to 240V AC: 949BTU
VPL-DW126:
100V to 120V AC: 1004BTU
220V to 240V AC: 956BTU
Specifications 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Items
Descriptions
Model
VPL-DX146/DX126/VPL-DW126
13
7
3
Standard
dimensions
(W/H/D)
Approx. 315 × 87.2 × 233 mm (12 /32 × 3 /16 × 9 /16
inches)
13
15
Approx. 315 × 75 × 230.5 mm (12 /32 × 2 /16 ×
1
9 /16 inches) (without projecting parts)
Mass
Approx. 2.6 kg (5.8 lb)
Supplied
accessories
See “Checking the Supplied Accessories” in the supplied
Quick Reference Manual.
Optional
accessories
Projector Lamp LMP-D213 (for replacement)
*2 *3
Notes
*2: Information on accessories in this manual is current as of July 2013.
*3: Not all optional accessories are available in all countries and area. Please check with your local
Sony Authorized Dealer.
Design and specifications of the unit, including the optional accessories, are subject to change
without notice.
Notes
• Always verify that the unit is operating properly before use. SONY WILL NOT BE
LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF
THIS UNIT OR MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION
OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A
FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION
DEVICES, UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION
SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND.
50 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Pin assignment
HDMI connector (HDMI, female)
RGB input connector (Mini D-sub
15-pin, female)
19
1
18
2
1
2
3
4
5
6
7
8
9
T.M.D.S.
Data2+
11 T.M.D.S.
Clock Shield
T.M.D.S.
Data2 Shield
12 T.M.D.S.
Clock –
1
2
3
Video input
(red) R
9
Power supply
input for DDC
T.M.D.S.
Data2 –
13 N.C.
Video input
(green) G
10 GND
T.M.D.S.
Data1+
14 RESERVED
(N.C.)
Video input
(blue) B
11 GND
T.M.D.S.
Data1 Shield
15 SCL
4
5
GND
12 DDC/SDA
RESERVE
13 Horizontal sync
signal
T.M.D.S.
Data1 –
16 SDA
6
GND (R)
14 Vertical sync
signal
T.M.D.S.
Data0+
17 DDC
GND
7
8
GND (G)
GND (B)
15 DDC/SCL
T.M.D.S.
Data0 Shield
18 +5V Power
T.M.D.S.
Data0 –
19 Hot Plug
Detect
USB connector (Type A, female)
10 T.M.D.S.
Clock+
1
2
3
4
V
(4.4 - 5.25 V)
BUS
Data–
Data+
Ground
USB connector (Type B, female)
1
2
3
4
VCC (+5 V)
Data–
Data+
Ground
Specifications 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Acceptable Input Signals*1
Computer signal
Input connector
fH[kHz]/
fV[Hz]
Resolution
RGB/
HDMI
YPBPR
Input connector
z
z
1280 × 800
49.7/60
fH[kHz]/
fV[Hz]
Resolution
RGB/
HDMI
Digital TV signal*4
YPBPR
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
640 × 350
31.5/70
37.9/85
31.5/70
37.9/85
31.5/60
35.0/67
37.9/73
37.5/75
43.3/85
35.2/56
37.9/60
48.1/72
46.9/75
53.7/85
49.7/75
48.4/60
56.5/70
60.0/75
68.7/85
64.0/70
67.5/75
77.5/85
61.8/66
60.0/60
Input connector
Signal
fV[Hz]
RGB/
HDMI
YPBPR
640 × 400
640 × 480
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
480i
576i
60
50
60
50
60
50
60
50
60
50
z
480p
576p
1080i
1080i
720p
720p
1080p
1080p
800 × 600
z
832 × 624
Analog TV signal
z
1024 × 768
Input connector
Signal
fV[Hz]
VIDEO
z
NTSC
60
50
z
PAL/SECAM
1152 × 864
Notes
*1: •When a signal other than the signals listed
in table is input, the picture may not be
displayed properly.
• An input signal meant for screen
resolution different from that of the panel
will not be displayed in its original
resolution. Text and lines may be uneven.
*2: This is identified as a movie delivery signal
of 720/60p.
1152 × 900
1280 × 960
z
z
1280 × 1024 64.0/60
80.0/75
91.1/85
z
z
z
1400 × 1050 65.3/60
1600 × 1200 75.0/60
*3: This is identified as a movie delivery signal
of 1080/60p.
*4: Only G with sync/Y is supported.
1280 × 768
1280 × 720
47.8/60
45.0/60
*2
z
z
*3
1920 × 1080 67.5/60
z
z
z
z
z
1366 × 768
1440 × 900
47.7/60
55.9/60
52 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Projection Distance
The projection distance is the distance between the front of the lens and the surface of the
projected image. The following describes the projection distance and height from the center of
the lens to edge of screen by each projected screen size. Height H is the height from the bottom
of the projected image (top for ceiling mount) to A (determined by drawing a perpendicular line
from the center of the lens to projected image surface).
Caution
Never mount the projector on the ceiling or move it by yourself. Be sure to consult with
qualified Sony personnel (charged).
Floor Installation
Projection distance L
Projected
image
Center of lens
Height H from
center of lens
to edge of
screen
A
Projection Distance 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Ceiling Installation
Height H from center of
lens to edge of screen
Center of lens
A
Top side
Projected
image
Projection distance L
L: Projection distance L
H: Height H from center of lens to edge of screen
54 Projection Distance
Download from Www.Somanuals.com. All Manuals Search And Download.
Projection distance table (VPL-DX146)
Unit: m (inches)
Height H from center of lens to edge
of screen
Projected image size
Projection
Distance L
Minimum
Projection
Distance L
Maximum
Projection
Distance L
Diagonal D
Width × Height
80 inch (2.03 m)
1.63 × 1.22
(64 × 48)
2.25-2.92 (89-115)
2.81-3.66 (111-144)
3.38-4.40 (133-173)
4.23-5.51 (167-217)
5.65-7.36 (223-289)
-0.20 (-8)
-0.25 (-10)
-0.30 (-12)
-0.38 (-15)
-0.51 (-20)
-0.20 (-8)
-0.25 (-10)
-0.30 (-12)
-0.38 (-15)
-0.51 (-20)
100 inch (2.54 m) 2.03 × 1.52
(80 × 60)
120 inch (3.05 m) 2.44 × 1.83
(96 × 72)
150 inch (3.81 m) 3.05 × 2.29
(120 × 90)
200 inch (5.08 m) 4.06 × 3.05
(160 × 120)
Projection distance formula (VPL-DX146)
D: Projected image size (Diagonal)
H: Height H from center of lens to edge of screen
Expression#1
Unit: m (inches)
Minimum Projection Distance L
Maximum Projection Distance L
L=0.028366 × D-0.0290
(L=1.116781 × D-1.1416)
L=0.036956 × D-0.0283
(L=1.454972 × D-1.1124)
Expression#2
Height H from center of lens to edge of screen
Minimum Projection Distance L
Maximum Projection Distance L
H=-0.00254 × D+0.00000
(H=-0.10000 × D+0.00000)
H=-0.00254 × D+0.00000
(H=-0.10000 × D+0.00000)
Projection Distance 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Projection distance table (VPL-DX126)
Unit: m (inches)
Height H from center of lens to edge
of screen
Projected image size
Projection
Distance L
Minimum
Projection
Distance L
Maximum
Projection
Distance L
Diagonal D
Width × Height
80 inch (2.03 m)
1.63 × 1.22
(64 × 48)
2.42-2.88 (95-113)
3.02-3.60 (119-141)
3.63-4.33 (143-170)
4.55-5.42 (179-213)
6.07-7.23 (239-284)
-0.20 (-8)
-0.25 (-10)
-0.30 (-12)
-0.38 (-15)
-0.51 (-20)
-0.20 (-8)
-0.25 (-10)
-0.30 (-12)
-0.38 (-15)
-0.51 (-20)
100 inch (2.54 m) 2.03 × 1.52
(80 × 60)
120 inch (3.05 m) 2.44 × 1.83
(96 × 72)
150 inch (3.81 m) 3.05 × 2.29
(120 × 90)
200 inch (5.08 m) 4.06 × 3.05
(160 × 120)
Projection distance formula (VPL-DX126)
D: Projected image size (Diagonal)
H: Height H from center of lens to edge of screen
Expression#1
Unit: m (inches)
Minimum Projection Distance L
Maximum Projection Distance L
L=0.030427 × D-0.0234
(L=1.197898 × D-0.9193)
L=0.036301 × D-0.0236
(L=1.429177 × D-0.9283)
Expression#2
Height H from center of lens to edge of screen
Minimum Projection Distance L
Maximum Projection Distance L
H=-0.00254 × D+0.00000
(H=-0.10000 × D+0.00000)
H=-0.00254 × D+0.00000
(H=-0.10000 × D+0.00000)
56 Projection Distance
Download from Www.Somanuals.com. All Manuals Search And Download.
Projection distance table (VPL-DW126)
Unit: m (inches)
Height H from center of lens to edge
of screen
Projected image size
Projection
Distance L
Minimum
Projection
Distance L
Maximum
Projection
Distance L
Diagonal D
Width × Height
80 inch (2.03 m)
1.72 × 1.08
(68 × 42)
2.36-3.05 (93-120)
2.95-3.82 (117-150)
3.55-4.59 (140-180)
4.44-5.75 (175-226)
5.93-7.67 (234-302)
-0.20 (-8)
-0.25 (-10)
-0.29 (-12)
-0.37 (-15)
-0.49 (-19)
-0.20 (-8)
-0.25 (-10)
-0.29 (-12)
-0.37 (-15)
-0.49 (-19)
100 inch (2.54 m) 2.15 × 1.35
(85 × 53)
120 inch (3.05 m) 2.58 × 1.62
(102 × 64)
150 inch (3.81 m) 3.23 × 2.02
(127 × 79)
200 inch (5.08 m) 4.31 × 2.69
(170 × 106)
Projection distance formula (VPL-DW126)
D: Projected image size (Diagonal)
H: Height H from center of lens to edge of screen
Expression#1
Unit: m (inches)
Minimum Projection Distance L
Maximum Projection Distance L
L=0.029757 × D-0.0291
(L=1.171525 × D-1.1450)
L=0.038536 × D-0.0282
(L=1.517164 × D-1.1091)
Expression#2
Height H from center of lens to edge of screen
Minimum Projection Distance L
Maximum Projection Distance L
H=-0.00246 × D+0.00000
(H=-0.09675 × D+0.00000)
H=-0.00246 × D+0.00000
(H=-0.09675 × D+0.00000)
Projection Distance 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Side
23
7
69 (2 /32)
113 (4 /16)
23
7
69 (2 /32)
31 (1 /32)
Unit: mm (inches)
Rear
21
15
16.8 ( /32)
164.4 (6 /32)
3
28 (1 /32)
3
157.5 (6 /16)
15
252.5 (9 /16)
Unit: mm (inches)
Dimensions 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Bottom
3
17
78.9 (3 /32)
38.8 (1 /32)
76.4 (3)
15
15
88.5 (3 /32)
23.9 ( /16)
21
7
271 (10 /32)
22 ( /8)
Unit: mm (inches)
60 Dimensions
Download from Www.Somanuals.com. All Manuals Search And Download.
R
About Trademarks
• Adobe and Adobe Acrobat are trademarks
or registered trademarks of Adobe
Systems Incorporated in the United States
and/or other countries.
• Kensington is a registered trademark of
Kensington Technology Group.
• The terms HDMI and HDMI High-
Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in
the United States and other countries.
• Internet Explore is registered trademarks
of Microsoft Corporation in the United
States and/or other countries.
• PJLink is a registered trademark of Japan
Business Machine and Information
System Industries Association.
• AMX is a trademark of AMX Corporation.
• Crestron RoomView is a trademark of
Crestron Corporation.
S
T
• All other trademarks and registered
trademarks are trademarks or registered
trademarks of their respective holders. In
this manual, and marks are not
specified.
™
®
U
V
W
Z
62 Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|