MICRO COMPONENT SYSTEM
MODEL
XL-MP15H
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully.
It will guide you in operating your SHARP product.
XL-MP15H Micro Component System consisting of XL-MP15H (main unit) and CP-MP15H (speaker system).
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
●
Do not remove the outer
cover, as this may result in
electric shock. Refer internal
service to your local SHARP
service facility.
■
General
●
Please ensure that the equipment is positioned in
ventilated area and ensure that there is at least 10 cm (4") of free
space along the sides, top and back of the equipment.
a
well-
10 cm (4")
10 cm (4")
10 cm (4")
MICRO COMPONENT SYSTEM
XL-MP15
O
N
/
S
T
A
N
D
-
B
Y
FUNCTION
TUNING/FOLDER
REMOTE
SENSOR
●
The ventilation should not be
impeded by covering the
ventilation openings with items,
such as newspapers,
PRESET
PHONES
A
U
D
I
O
I
N
10 cm
(4")
MM
LM
M
//DR
●
Use the unit on a firm, level
surface free from vibration.
tablecloths, curtains, etc.
PRESET
MICRO COMPONENT SYS
XL-MP15
TEM
TUNING/FOLDER
●
●
●
●
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Attention should be drawn to the environmental aspects of
battery disposal.
This unit should only be used within the range of 5˚C - 35˚C
(41˚F - 95˚F).
The apparatus is designed for use in moderate climates.
PRESET
●
Keep the unit away from direct
sunlight, strong magnetic fields,
excessive dust, humidity and
electronic/electrical equipment
(home computers, facsimiles,
etc.) which generate electrical
noise.
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
X
L
-
M
P
1
5
Y
S
T
E
M
TUNING//FOLDER
PRESET
●
●
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures higher than
60˚C (140˚F) or to extremely low temperatures.
If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
■
Volume control
●
The sound level at a given volume setting depends on speaker
efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on. Listen to music at moderate levels. Excessive sound
pressure from earphones and headphones can cause hearing loss.
●
In case of an electrical storm,
unplug the unit for safety.
●
●
Hold the AC power plug by the head
when removing it from the wall socket,
as pulling the lead can damage internal
wires.
The AC power plug is used as a
disconnect device and shall always
remain readily operable.
Controls and indicators
■
Front panel
Reference page
1. Disc Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. ON/STAND-BY Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. Function Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Stand-by Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5. Disc Track Down or Fast Reverse,Tuner Preset Down,
Time Down Button . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 12, 13
6. Disc Track Up or Fast Forward,Tuner Preset Up,
1
MICRO COMPONENT SYSTEM
XL-MP15
ON/ STAND-BY
2
3
4
8
REMOTE
SENSOR
9
10
Time Up Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 12, 13
7. Volume Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
8. Remote Sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
9. Tuning Up/Folder Up Button . . . . . . . . . . . . . . . . . . . . 10, 12
10. Tuning Down/Folder Down Button . . . . . . . . . . . . . . . 10, 12
11. Stop Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10
12. Play/Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 11
13. Audio In Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
14. Headphone Socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
11
12
13
5
6
PRESET
PHONES
AUDIO IN
7
14
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators (continued)
■
Display
1
2
3
4
5
Reference page
1. AM Mode Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. FM Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . 12
4. Timer Play Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. Memory Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 12
6. Tuner Receiving Frequency Indicators . . . . . . . . . . . . . . 12
6
■
Rear panel
Reference page
1. AC Power Lead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. FM Aerial Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. AM Loop Aerial Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1
■
Speaker system
1. Full Range
2. Bass Reflex Duct
3. Speaker Wire
4
2
3
2
1
3
■
Remote control
1
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 5
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. CD Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10
4. CD Play/Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 11
5. Disc Track Down or Fast Reverse,Tuner Preset Down,
Time Down Button . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 12, 13
6. Disc Track Up or Fast Forward,Tuner Preset Up,
Time Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 12, 13
7. Tuning Down/Folder Down Button . . . . . . . . . . . . . . . 10, 12
8. Tuning Up/Folder Up Button . . . . . . . . . . . . . . . . . . . . 10, 12
9. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
10. Sleep Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
11. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 7, 13, 14
12. Audio In Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
13. Tuner [Band] Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
14. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
15. Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
16. Memory/Display Button. . . . . . . . . . . . . . . . . . . . . 10, 11, 12
17. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 6
18. Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
19. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
20. Equaliser Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
10
2
11
12
13
14
3
4
5
6
7
8
15
16
9
17
18
19
20
3
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
Make sure to unplug the AC power lead before making any connections.
■
Aerial connection (see page 4)
AM loop aerial
Right speaker
Left speaker
FM aerial
■
Speaker connection
(see page 5)
■
AC power connection (see page 5)
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
Note:
■
Aerial connection
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Attached FM aerial:
Position the FM aerial wire in the direction where the strongest
signal can be received.
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Supplied AM loop aerial:
Connect the AM loop aerial to the AM loop aerial socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Wall
Screws
(not supplied)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections (continued)
Remote control
■
Battery installation
■
Speaker connection
Connect the black wire to the minus (–) terminal, and the red wire to
the plus (+) terminal.
1
Open the battery cover.
2
Insert the supplied batteries according to the direction indicated
in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3
Close the cover.
Red
Black
Caution:
●
Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.
●
Do not mistake the right and the left
channels. The right speaker is the one on
the right side when you face the unit.
Do not let the bare speaker wires touch
each other.
Precautions for battery use:
●
●
●
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit is not to be used for long period
of time. This will prevent potential damage due to battery
leakage.
●
●
●
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You
Incorrect
may be injured.
Caution:
●
●
●
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Installing the batteries incorrectly may cause the unit to
malfunction.
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
■
Using antislip speaker cushions
You can install the speakers either vertically or horizontally. Affix the
cushions (supplied) to the bottom of the speakers to prevent them
from sliding or falling due to vibration.
(Vertical position)
(Horizontal position)
Battery removal:
Open the battery cover and pull up the battery to take out.
Notes concerning use:
●
Replace the batteries if the operating distance is reduced or if
the operation becomes erratic. Purchase 2 “AAA” size batteries
(UM-4, R03, HP-16 or similar).
●
●
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
●
Keep the remote control away from moisture, heat, shock, and
vibrations.
A sheet of speaker cushions (8 pcs) is supplied with this product.
Use 4 cushions per speaker.
■
Test of the remote control
■
AC power connection
Check the remote control after checking all the connections (see
pages 4 - 5).
Point the remote control directly at the remote sensor on the unit.
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
Remote sensor
MICRO COMPONENT SYSTEM
XL-MP15
ON/ STAND-BY
REMOTE
SENSOR
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
PRESET
PHONES
AUDIO IN
0.2 m - 6 m
(8" - 20')
Note:
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
ON
STAANND-BBYY
5
Download from Www.Somanuals.com. All Manuals Search And Download.
General control
■
Extra bass control (X-BASS)
ON/ STAND-BY
MICRO COMPONENT SYSTEM
XL-MP15
ON/ STAND-BY
When the X-BASS button is pressed, the unit will enter the extra
bass mode which emphasises the bass frequencies and “X-BASS
ON” will appear.
REMOTE
SENSOR
FUNCTION
To cancel the extra bass mode, press the X-BASS button until
“X-BASS OFF” appear.
PRESET
PHONES
AUDIO IN
■
Function (on main unit only)
ON
STAND-BY
When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
MUTE
CD
TUNER
AUDIO IN
VOL
Note:
The backup function will protect the memorised function mode
(except clock) for a few hours should there be a power failure or the
AC power lead becomes disconnected.
X-BASS
EQUALLIZER
■
Muting
The volume is muted temporarily when pressing the MUTE button
on the remote control. Press again to restore the volume.
■
Equaliser
When the EQUALIZER button on the remote control is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER button repeatedly until the desired
sound mode appears.
■
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
At STAND-BY mode, red indicator will light up.
FLAT
ROCK
CLASSIC
POPS
JAZZ
■
Auto power off function
In the stop mode of CD operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
■
Volume auto set-in
●
If you turn off and on the main unit with volume set to 16 or
higher, the volume will start at 16.
●
If you turn the unit off then on again with the volume level set to
less than 15, it will turn on again in the level set.
■
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase.When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOL (+ or –) button to increase or decrease the volume.
.....
MIN
30 MAX
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
Listening to a CD or MP3/WMA disc
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record on
them. Some audio CD-R and CD-RW discs may not be playable due
to the state of the disc or the device that was used for recording.
ON/ STAND-BY
MICRO COMPONENT SYSTEM
XL-MP15
ON/ STAND-BY
REMOTE
SENSOR
MP3:
MP3 is a form of compression. It is an acronym which stands for
MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
PRESET
PHONES
AUDIO IN
PRESET
●
●
●
This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
During VBR file playback, time counter in the display may differ
from its actual playback time.
ON
STAND-BY
CLOCK
TIMER
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
PRESET
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.
●
Bitrate which is supported by WMA is 64 ~ 160 kbps.
In this example, the clock is set for the 24-hour (00:00) display.
1
2
3
In STAND-BY condition.
Press the CLOCK/TIMER button for more than 2 seconds.
Within 10 seconds, press the PRESET ( or ) button to set
hour.
4
5
Press the CLOCK/TIMER button again.
Within 10 seconds, press the PRESET ( or ) button to set
minute.
6
Press the CLOCK/TIMER button again.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will appear for
about 5 seconds.
To readjust the clock after a power failure or unplugging the
unit or after unit is reset:
Perform “Setting the clock” from beginning.
Note:
To reset the clock if the power fails or is unplugged, the unit must be
in the STAND-BY mode.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc (continued)
To fast reverse audibly:
During playback, press and hold down the
the button to resume playback.
button. Release
ON/ STAND-BY
MICRO COMPONENT SYSTEM
XL-MP15
ON/ STAND-BY
REMOTE
SENSOR
To stop playback:
Press the
(CD ) button.
FUNCTION
Caution:
●
PRESET
PHONES
AUDIO IN
Do not play discs of special shapes (heart, octagon, etc.). It may
cause malfunctions.
●
If a disc is damaged, dirty, or loaded upside down, “NO DISC”
will appear on the display.
●
●
●
Keep foreign objects out of the disc compartment.
Subjecting the unit to shock or vibration may cause mistracking.
When the unit is not being used, be sure to close the disc
compartment. If it is left open, the lens may be covered with dust
and the unit may not operate properly.
ON
STAND-BY
CD
●
If TV or radio interference occurs during disc operation, move
the unit away from the source of the interference.
1
2
3
Press the ON/STAND-BY button to turn the power on.
Open the disc compartment.
■
Various disc functions
Place the disc on the spindle, label side up.
8 cm (3") disc may be played without an adaptor.
Function
Play
Main unit
Remote control
Operation
Press in the
stop mode.
12 cm (5")
or
8 cm (3")
Stop
Press in the
playback
mode.
MICRO COMPONENT SYSTEM
XL-MP15
ON/STAND BY
REMOTE
SENSOR
Pause
Press in the
playback
mode. Press
4
Close the disc compartment.
the
/
(CD
/
)
button to
resume
playback from
the paused
point.
Total number Total playing
Total number Total number
of folders on of files (track)
of tracks on
the disc
time of the
disc
the disc
on the disc
●
Due to the structure of its disc information, it takes longer
(approximately 20 to 90 seconds) to read a CD-R/RW disc
recorded in the MP3 or WMA format than a normal CD.
Track up/
Track
Press in the
playback or
stop mode.
PRESET
down
5
Press the
/
(CD
/
) button to start playback from track 1.
When the last track on the disc has finished playing, the unit will
stop automatically.
PRESET
If you press the
button in the
stop mode,
To interrupt playback:
press the
(CD
/
●
Press the
time will blink to indicate pause condition.
Press the (CD ) button again to resume playback.
/
(CD
/
) button during playback. The playing
/
)
button to start
the desired
track.
●
/
/
To listen to the track being played again:
During playback, press the button.
Fast
Press and hold
down in the
playback
PRESET
forward/
Fast
To move to the beginning of the next track:
During playback, press the button.
reverse
PRESET
mode.
To skip a number of tracks at one time:
Press the or button repeatedly until the desired
track number is shown.
Release the
button to
resume
playback.
To start playback a desired track:
Press the or button whilst in the stop mode to
select the track number and then press the
/
(CD
/
) button.
Notes for CD or MP3/WMA disc:
●
Rewritable multi-session discs with unfinished writing, can still
be played.
To fast forward audibly:
During playback, press and hold down the
the button to resume playback.
button. Release
●
When a disc (CD, WMA or MP3) is input, “TOC READ” will be
displayed for several seconds depending on the number of files
in the disc. If this indication is displayed for an indefinite period
of time due to unspecified file being played or external noise etc.,
switch off the main AC power supply and then switch it on again.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3/WMA disc playback
In case of a MP3/WMA disc mode:
■
Direct track search (REMOTE CONTROL
ONLY)
The normal playback.
“NORMAL”
“RPT ONE”
“RPT FLD”
By using the Direct Search buttons, the desired tracks on the current
disc can be played.
Repeat the current playing track.
Repeat the current playing folder.
Use the Direct Search buttons on
the remote control to select the
desired track whilst playing or in
the stop mode.
Repeat the current playing disc.
“RPT ALL”
Caution:
Selected track number
After performing repeat, be sure to press the
Otherwise, it will play continuously.
(CD ) button.
●
●
The Direct Search buttons allow you to select up to number 9.
When selecting number 10 or higher, use the “+10” button.
■
Random play (REMOTE CONTROL ONLY)
A. For example, to choose 13
1
3
2
4
The tracks on the disc can be played in random order automatically.
1
2
3
Press the “+10” button once.
Press the “1” button.
To random play all tracks:
5
7
6
8
0
Press the RANDOM button on the remote control. Main unit will
show “RANDOM” after playback a track.
Press the “3” button.
9
10
B. For example, to choose 130
1
2
3
4
Press the “+10” button twice.
Press the “1” button.
To cancel random playback, press the RANDOM button again.
Notes:
Press the “3” button.
●
If you press the
or
button during random play,
Press the “0” button.
you can move to the track selected next by the random
operation.
Whilst in the stop mode:
Press the Direct Search buttons to select desired track and the
selected track will be played back.
●
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
●
●
During random play, repeat function is not possible.
In random playback it will contine until "stop" is pressed
Whilst playing the disc:
The desired track can be selected by simply pressing the Direct
Search buttons and the selected track will be played back.
.
Notes:
Notes:
●
A track number higher than the number of tracks on the disc
cannot be selected.
●
This unit only supports “MPEG-1 Audio Layer-3” format.
(Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2 Audio Layer-3”, “MPEG-2.5 Audio Layer-3” and MP1,
MP2 format are not supported.
●
●
During random play, direct search is not possible.
For CD-R/RW discs recorded in the MP3 or WMA format, you
can select the track number but cannot select the folder by
pressing the Direct Search buttons.
●
●
●
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
To stop playback:
Press the (CD ) button.
■
Repeat play (REMOTE CONTROL ONLY)
●
●
●
Playlists are not supported on this unit.
This unit only supports MP3 ID3-Tag version 1.x.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
Repeat play can play single track, folder tracks or all tracks
sequence continuously.
●
●
WMA meta tag also supports title, artist and album name which
are recorded in WMA files.
Copyright protected WMA files cannot be played back.
RANDOM
REPEAT
First time press the REPEAT button, the display will show current
repeat mode. Within 3 seconds, press REPEAT button again to
change the repeat mode in the following order:
In case of an audio CD mode:
The normal playback.
“NORMAL”
“RPT ONE”
Repeat the current playing track.
“RPT ALL”
Repeat the current playing disc.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3/WMA disc playback (continued)
■
Programmed play
■
Programmed play (Folder mode)
1
Whilst in the stop mode, press the MEMORY/DISP button to
enter the programming save mode.
1
Whilst in the stop mode, press the MEMORY/DISP button to
enter the programming save mode.
“MEM” icon light up to indicate programming save mode.
2
3
Press the
tracks.
or
button to select the desired
2
Press the TUNING/FOLDER ( or ) button on the remote
control to select the desired folder.
Press the MEMORY/DISP button to save the track number.
Then press the
or
button on the remote
control to select the desired tracks.
4
5
Repeat steps 2 – 3 for other tracks. Up to 32 tracks can be
programmed.
3
4
5
Press the MEMORY/DISP button to save the folder and track
number.
Press the
/
(CD
/
) button to start playback.
Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks can
be programmed.
To cancel the programmed play mode:
During programmed stop mode, press the
display will show “CLEAR” and all the programmed contents will be
cleared.
(CD ) button. The
Press the
/
(CD
/
) button to start playback.
“MEM” icon will blink to indicate programmed playback.
Notes:
●
If the disc lid is opened, the programmed sequence will be
cancelled.
To cancel the programmed play mode:
During programmed stop mode, press the
(CD ) button. The
●
The programme will automatically cancelled if you press the
ON/STAND-BY button to enter the stand-by mode or change the
function from CD to another.
display will show “CLEAR” and all the programmed contents will be
cleared.
●
During the programme operation, press the RANDOM button will
automatically cancelled the programme.
Notes:
●
If the disc lid is opened, the programmed sequence will be
cancelled.
●
The programme will automatically cancelled if you press the
ON/STAND-BY button to enter the stand-by mode or change the
function from CD to another.
●
During the programme operation, press the RANDOM button will
automatically cancelled the programme.
PRESET
AUDIO IN
PRESET
AUDIO IN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA folder mode (only for MP3/WMA files)
To play back MP3/WMA (Windows Media Audio) file
■
Procedure to playback MP3/WMA disc
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files. Follow the
instructions from the website on how to download from the music
files.
You can then play back these downloaded music files by burning
them to a CD-R/RW disc.
To playback CD-R/RW.
1
Press the CD button, and load a MP3/WMA disc.
●
After disc is loaded, the disc info will be displayed.
●
Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.
■
About folder playback order
Total number
of folders
Total number
of tracks
If MP3/WMA files are recorded in several folders, a folder number
will be set to each folder automatically.
●
●
In case in folder mode, proceed to step 2.
In case track is selected, proceed to step 3.
These folders can be selected by the TUNING/FOLDER ( or
)
button on the remote control. If there is no supported file formats
inside the selected folder, the folder is skipped and the next folder
will be selected.
2
3
4
Press the TUNING/FOLDER ( or ) button to select desired
playback folder.
Example: How to set folder number if MP3/WMA format files are
recorded as below figure.
●
It will playback in the 1st track of the selected folder when
CD ) is pressed.
/
(
/
1
2
ROOT folder is set as folder 1.
As for folders inside ROOT folder (Folder A and Folder B), the
folder which is recorded earlier on the disc will be set as folder 2.
Select desired track to be played back by pressing the
or button.
3
4
As for folder inside Folder A (Folder C and Folder D), the folder
which is recorded earlier on the disc will be set as folder 3.
Because there is no folder in Folder C, Folder D will be set as
folder 4.
Press the
/
(CD
/
)
button and playback will start.
5
6
Folder E that is inside Folder D will be set as folder 5.
Folder B inside ROOT folder will be set as folder 6.
●
●
●
Press the MEMORY/DISP button to display Title, Artist and
Album name if it is recorded on the disc.
To cancel the display of Title, Artist and Album name, press
the MEMORY/DISP button until track number appear.
Title, Artist and Album name will scroll through the display as
follows.
* The folder and file order information which is recorded on the disc
depends on the writing software. There maybe possibilities that this
unit will playback the files not according to our expected playback
order.
All the files inside the selected folder will be played back.
In case Folder D is selected, file 4, 5 and 6 will be played back. File
7 and 8 in Folder E will not be played back.
Track number
Title
FILE 1
FILE 2
FILE 3
ROOT
(FOLDER 1)
FOLDER A
(FOLDER 2)
FOLDER C
(FOLDER 3)
Artist
FOLDER D
(FOLDER 4)
FILE 4
FILE 5
Album
FILE 6
FOLDER E
(FOLDER 5)
MP3 ID3-Tag only support version 1.x.
FILE 7
FILE 8
Note:
FOLDER B
FILE 9
If “NO DISC” is displayed, it means “Copyright protected WMA file”
or “Not supported playback file” is selected.
(FOLDER 6)
FILE 10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
■
Memorising a station
ON/ STAND-BY
MICRO COMPONENT SYSTEM
XL-MP15
ON/ STAND-BY
You can store 40 FM and AM stations in memory and recall them at
the push of a button (PRESET ( or )).
REMOTE
SENSOR
FUNCTION
1
2
Perform steps 1 - 3 in “Tuning” on page 12.
Press the MEMORY/DISP button to enter the preset tuning
saving mode.
PRESET
PHONES
AUDIO IN
3
4
Within 5 seconds, press the PRESET ( or ) button to select
the channel to be preset.
TUNER
BAND
TUNING FOLDER
Press the MEMORY/DISP button.
In this example, “103.25 MHz” FM station is preset on FM
channel 9.
MEMORY
DISP
5
Repeat steps above to add more preset stations.
●
When presetting a new station, the previous preset station
is cleared.
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become
disconnected.
Note:
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
■
To recall a memorised station
■
Tuning
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER button on the remote control or FUNCTION
button repeatedly on the main unit to select tuner function.
■
To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan).
3
Press the TUNING/FOLDER ( or ) button to tune into the
desired station.
Manual tuning:
Press the TUNING/FOLDER ( or ) button as many times as
required to tune in the desired station.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
Auto tuning:
When the TUNING/FOLDER (
more than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
2
Press the PRESET (
station is located.
or
) button again when the desired
or
) button is pressed for
Notes:
●
When radio interference occurs, auto scan tuning may stop
automatically at that point.
●
●
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING/FOLDER
PRESET
(
or ) button again.
To receive FM stereo transmission:
Press the TUNER (BAND) button to select stereo mode and “ST”
indicator will be displayed.
●
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
FM stereo mode indicator
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation
10 To select CD, press the
/
(CD
/
) button and then press
the CLOCK/TIMER button.
11 To select TUNER, press the TUNER (BAND) button and then
PRESET
press the CLOCK/TIMER button.
AUDIO IN
■
Timer playback
Before setting timer:
OR
1
2
Check that the clock is set to the correct time (refer to page 7).
If it is not set, you cannot use the timer function.
12 Select a station by pressing the PRESET ( or ) button and
then press the CLOCK/TIMER button to set the station selected.
For timer playback, load the disc to be played back.
1
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK/TIMER button for about 2 seconds.
OR
2
13 To select a preset channel number, press the PRESET ( or
3
4
Within 10 seconds, press the CLOCK/TIMER button.
) button and then press the CLOCK/TIMER button.
Press the PRESET ( or ) button to set hour then press the
CLOCK/TIMER button.
14 The “ ” indicator lights up and the unit is ready for timer
playback.
5
6
Press the PRESET ( or ) button to set minute and then
press the CLOCK/TIMER button.
15 Press the ON/STAND-BY button to enter the power stand-by
mode. Press the CLOCK/TIMER button to confirm the timer
setting.
16 When the preset time is reached, playback will start. “
”
indicator will blink to show timer playback.
17 When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Switch input with the PRESET ( or ) button to select
“TMR-OFF” and then press the CLOCK/TIMER button.
Checking the timer setting:
1
Press the CLOCK/TIMER button repeatedly to view as follow:
7
8
Press the PRESET ( or ) button to set hour and then press
the CLOCK/TIMER button.
Cancelling the timer setting:
Press the SLEEP button for 2 seconds. The “ ” indicator disappear
and the display show “TMR-OFF”.
Press the PRESET ( or ) button to set minute and then
press the CLOCK/TIMER button.
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, press the SLEEP button for 2 seconds.
The “ ” indicator light up and the display show “TMR-ON”.
9
To select the timer playback source, switch input with PRESET
Notes:
●
(
or ) button to select “SOURCE”.
After selecting the playback source, when press the
CLOCK/TIMER button to confirm, “SOURCE” will appear and
blink for 2 seconds, then change to last function.
●
●
When the preset time is reached, playback will start at current
setting if no selected playback source is made.
The volume cannot be preset during timer setting.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (continued)
Enhancing your system
The connection lead is not included. Purchase a commercially
available lead as shown below.
■
Sleep operation
The radio, compact disc and audio in mode can all be turned off
automatically.
Portable audio player, etc.
1
2
Play back the desired sound source.
Audio cable
(not supplied)
Press the SLEEP button repeatedly to select the time.
(Maximum: 90 minutes - Minimum: 10 minutes)
MICRO COMPONENT SYSTEM
XL-MP15
ON/ STAND-BY
REMOTE
SENSOR
PHONES
AUDIO IN
3
The unit will enter the power stand-by mode automatically after
the preset time has elapsed.
PRESET
PHONES
AUDIO IN
To confirm the remaining sleep time:
Press the SLEEP button once.
1
●
●
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is
displayed by pressing the SLEEP button (step 2).
To cancel the sleep operation:
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
■
Listening to the playback sounds of
portable audio player, etc.
1
Press the SLEEP button repeatedly to select “SLEEP 00”.
1
Use a connection lead to connect the portable audio player etc.
to the AUDIO IN socket.
■
To use timer and sleep operation together
2
3
4
Press the ON/STAND-BY button to turn the power on.
Press the AUDIO IN button.
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Play the connected equipment.
If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of
the connected device.
If volume level is too low, increase the volume of the connected
device.
1
2
Set the sleep time (see “Sleep Operation”).
Whilst the sleep timer is set, set the timer playback (steps 2 - 14,
page 13).
Note:
Sleep timer setting
90 minutes
Timer playback setting
End time
Desired time
Timer playback start time
To prevent noise interference, place the unit away from the
television.
Sleep operation will
automatically stop
■
Headphones
●
Do not turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones and
headphones can cause hearing loss.
●
●
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
●
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
■
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
■
General
Symptom
Possible cause
possible (about
transmitter with a soft cloth before operating the unit.
1
hour). Wipe off any condensation on the
●
●
The clock is not set to
the correct time.
●
●
Did a power failure occur?
Reset the clock. (Refer page 7)
When a button is
pressed, the unit does
not respond.
Set the unit to the power stand-
by mode and then turn it back
on.
■
If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
●
●
●
●
If the unit still malfunctions,
reset it. (Refer page 15)
●
No sound is heard.
Is the volume level set to
“MIN”?
If such a problem occurs, do the following:
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Are the headphones
connected?
Are the speaker wires
disconnected?
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
■
CD player
■
Factory reset, clearing all memory
Symptom
Possible cause
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
●
●
Playback does not start.
●
●
●
●
Is the disc placed upside
down?
Playback stops in the
middle or is not
performed properly.
2
Press and hold TUNING/FOLDER
button on main unit. “RESET” appear.
and press ON/STAND-BY
Does the disc satisfy the
standards?
Is the disc distorted or
scratched?
●
Playback sounds are
skipped, or stopped in
the middle of a track.
Is the unit located near
excessive vibrations?
Caution:
This operation will erase all data stored in memory including clock,
timer setting, tuner preset and CD programme.
●
●
Is the disc very dirty?
Has condensation formed
inside the unit?
■
Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in the disc
tray.Then, set the unit to the power stand-by mode. Carrying the unit
with discs left inside can damage the unit.
■
Remote control
Symptom
Possible cause
■
Care of compact discs
●
The remote control does
not operate.
●
●
Is the AC power lead of the unit
plugged in?
Are the batteries polarity
correct?
Are the batteries dead?
Is the distance or angle
incorrect?
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD
collection and player.
●
●
●
●
●
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
Keep your discs away from direct sunlight, heat, and excessive
moisture.
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
●
Does the remote control sensor
receive strong light?
■
Tuner
Symptom
Possible cause
YES
Correct
NO
●
The radio makes
unusual noises
continuously.
●
●
Is the unit placed near the TV or
computer?
Is the FM aerial or AM loop
aerial placed properly? Move
the aerial away from the AC
power lead if it is located
nearby.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
■
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
■
General
●
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Power source
Power consumption Power on: 15 W
Power stand-by: 0.6 W(*)
AC 220 - 240 V ~ 50/60 Hz
Dimensions
Width: 200 mm (7-7/8")
Height: 137 mm (5-3/8")
Depth: 210 mm (8-1/4")
■
Cleaning the CD pickup lens
Do not touch the laser
pickup lens. If finger prints
or dust accumulate on the
pickup, clean it gently with
a dry cotton swab.
Weight
1.5 kg (3.3 lbs.)
(*) This power consumption value is obtained when the main unit
is in stand-by mode.
MICRO COMPONENT SYSTEM
XL-MP15
ON/STAND BY
REMOTE
SENSOR
■
Amplifier
Output power
MPO: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 8 W (4 W + 4 W) (1% T.H.D.)
Output terminals
Input terminals
Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Audio In (audio signal):
250 mV/47 k ohms
■
CD player
Type
1 disc top loading
Signal readout
Non-contact, 3-beam semiconductor
laser pickup
D/A converter
Multi bit D/A converter
20 - 20,000 Hz
Frequency
response
Dynamic range
90 dB (1 kHz)
■
Tuner
Frequency range
Other
FM: 87.5 - 108 MHz
AM: 522 - 1620 KHz
Maximum station can be stored is 40
preset.
■
Speaker
Type
1-way type speaker system
10 cm (4") Full Range
Maximum input
power
10 W
Rated input power
Impedance
5 W
4 ohms
Dimensions
Width: 135 mm (5-5/16")
Height: 160 mm (6-14/64")
Depth: 165 mm (6-1/2")
Weight
0.87 kg (1.92 lbs.)/each
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months
from the date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not
attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury
caused by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage,
vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and
remedies under any relevant legislation in the country of sale.
IMPORTANT
DO NOT RETURN THIS DOCUMENT TO SHARP
For your reference, please enter the particulars of your purchase below and retain,
with your purchase documentation.
ION OF
D
T
A
MITE
I
ve
ri
Model No.
Serial No.
Date of Purchase
Retailer
D
ORPOR
AND L
on
st
P C
n
AL
E
kland
SHAR
NEW Z
59 Hugo Joh
Penrose, Auc
ON OF
TI
MITED
LI
.
04)
405
0
2
e
9
PTY
CORPORA
2148
d Driv
NSW
od
ABN 40 003 0g3wo
(JUNE
014
m
SHARP
AUSTRALIA
untingwoo
r
o
f
P
S
n
i
1 H
Hunt
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
92L410CM813021
Download from Www.Somanuals.com. All Manuals Search And Download.
09F R AS 1
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
OR CALL SHARP CUSTOMER CARE
1300 135 022
(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
FOR LOCATION ENQUIRIES WITHIN
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(JUNE 2004)
Download from Www.Somanuals.com. All Manuals Search And Download.
|