4-125-572-12 (1)
Data
Projector
Operating Instructions
for Network / USB File Viewer
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
VPL-MX25
VPL-DX15
© 2009 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Configuring Using Simple Setting
Connection ..............................16
Configuring Using “Simple Setting”
Connection ..............................17
Configuring the Network Settings
Using the Menu .............................19
Use of Windows Vista® Network
Projector ....................................6
Configuring the Wired Network
Setting (VPL-DX15 Only) ......19
Configuring the Wireless Network
Setting ......................................19
Configuring the Common Setting
Items ........................................21
Use of the Feature for Monitoring
and Operating the Projector from
a Computer via a Web
Preparing for Using the USB File
Viewer Feature ..............................23
Browser .....................................7
Types of Files Available for
Browsing .........................................8
Restrictions on Folder Names and
Filenames on a File List ............... 10
Running a Presentation via a
Projector ........................................24
Configuring the Settings on the
Projector ..................................24
Configuring the Settings on the
Computer .................................24
Projecting a File Stored on a Network
Directly—Network File Viewer ....25
Making a Wired Connection with a
Computer ...................................... 14
Configuring the Settings on the
Computer .................................25
Configuring Using Simple
Setting ..................................... 15
Configuring the Settings on the
Projector ..................................25
Making a Wireless Connection with a
Computer ...................................... 16
Operating a Computer from the
Projector—Remote Desktop .........26
Table of Contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the Settings on the
Computer ................................ 26
Configuring the Settings on the
Projector .................................. 26
Projecting a Streaming Video Delivered
Streaming ...................................... 28
Configuring the Settings on the
Computer ................................ 28
Configuring the Settings on the
Projector .................................. 28
Monitoring and Operating the Projector
Using a Web Browser ................... 29
Confirming the Information
—Information ......................... 30
Operating the Computer
—Control ................................ 31
Setting the Network
Information .............................31
Setting up the Projector
—Setup ...................................32
Projecting a File Stored in the USB
—USB File Viewer .......................36
Monitoring the Microsoft Office
File ................................................ 37
Monitoring the PowerPoint
File .......................................... 37
4
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
B Getting Started
the computer located at a remote site from
the projector. Commercially available
USB mouse, USB keyboard (alphabetic
layout 101/102 keys), and USB hub are
required.
Overview of the
Features
This manual explains the features described
below.
Projecting a streaming video
delivered via a network—Video
Streaming
You can view a streaming video delivered by
a computer equipped with Windows Media
Encoder over a wireless or wired* network.
Network Features
Running a presentation over a
network—WindowsVista®Network
Projector
*VPL-DX15 only
• Use of the Windows Vista® Network
Projector feature which is a standard
application of Windows Vista allows you
to run a presentation over a wireless or
wired* network.
Monitoring and operating the
projector via a web browser
• You can monitor and operate the projector
from a computer via a web browser over a
wireless or wired* network.
*VPL-DX15 only
• As the feature uses an application included
with Windows Vista, you need not install
additional software.
• As this feature supports wireless
connection, no complicated cable
connection for a wired connection is
required.
*VPL-DX15 only
• You can have e-mail sent notifying you of
lamp replacement timing and error
information for the projector to a
previously specified e-mail address.
USB File Viewer Feature
Projecting a file stored in a
computer on a network directly—
Network File Viewer
Projecting files stored in a USB
memory—USB File Viewer feature
The projector is supplied with the simplified
file viewer with which you can browse files.
Using these simplified file viewer, you can
browse the following files on a computer
over a network.
– Microsoft Office file (PowerPoint/
Excel)
The projector is supplied with the simplified
file viewer with which you can browse files.
Using these simplified file viewer, you can
browse the following files stored in a USB
memory connected to the USB connector of
the projector without using a computer.
– Microsoft Office file (PowerPoint/
Excel)
– Photo file
– Video file
– Photo file
For details on files you can browse, refer to
– Video file
For details on files you can browse, refer to
Operating a computer from the
projector—Remote Desktop
• The projector supports the Remote
Desktop feature included with Windows
operating systems.
• If a USB mouse and USB keyboard
(alphabetic layout 101/102 keys) are
connected to the projector, you can control
Overview of the Features
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Projector feature installed.
The main operating systems equipped
with the Windows Vista® Network
Projector feature are as follows:
– Windows Vista Home Premium
– Windows Vista Business
Precautions
• This manual explains the Network
function and how to operate USB File
Viewer features, using the VPL-MX25 or
VPL-DX15 data projector.
• The displays of VPL-DX15 are used in the
explanation. Some items in the display
may not be displayed in VPL-MX25.
• Before you use these features, read the
precautions for each feature.
• For the operations of the projector, refer to
the Operating Instructions contained on
the CD-ROM.
• Configuration of a computer varies with
the model, operating system or the local
region where the computer is used. For
details on system configuration, refer to
the manual that comes with your
computer, online help, or the Microsoft
website.
– Windows Vista Ultimate
• There are some restrictions on use of the
Windows Vista® Network Projector
feature.
– The Windows Vista® Network Projector
feature is not suitable for reproduction of
moving images, as the update interval of
the image reproduction on the projector
is longer than that on the computer.
– As the projector cannot be connected to
a computer with resolution higher than
that of the projector, it is necessary to
convert the resolution of the computer to
less than that of the projector. If,
however, your computer has Windows
Vista Service Pack1 or later version
installed, a dialog box that prompts you
to convert the resolution to less than that
of the projector opens, and the resolution
will be down-converted. Then the
resolution of the computer is
automatically restored to the original
one when you quit this feature.
– The projector cannot project an image of
Windows Media Center in full-screen
display.
– If the connected computer has more than
16-bit color display, the projected image
from the projector is automatically
converted to 16-bit color.
• It may take some time to show another
display, such as detailed information.
• It takes about a minute just after the power
is turned on until the network function or
USB file viewer can be used.
Use of Network Features
• A computer to be connected to the
projector should be equipped with either
of the following network features:
– Wireless Network (802.11a/b/g)*
– Wired Network (IEEE 802.3 10Base-T/
100Base-TX)
* A Wireless Network is not available in
some countries and regions.
• Regarding 802.1x Authentication, the
projector adopts EAP Type (Extensible
Authentication Protocol type) and
– Any wallpaper projected by the
projector using this feature is displayed
in a single color.
– Reproduction of audio using the
Windows Vista® Network Projector
feature is not available.
supports the PEAP (MS-CHAP v2)
authentication method. The projector
supports only Windows 2003 Server as the
authentication server (RADIUS Server).
–
(pause mark) may appear in the
screen saver starting window. In this
case, cancel the screen saver to restore
the previous display.
may be displayed during other
operations. Consult the manufacturer of
your computer for details on such an
Use of Windows Vista®
Network Projector
issue when
it go away, etc.
– This feature may not be available,
depending on antivirus software
appears or how to make
• To use this feature, your computer is
required to have an operating system that
supports the Windows Vista® Network
6
Precautions
Download from Www.Somanuals.com. All Manuals Search And Download.
installed on your computer. It may
become available if you change the
setting of the software so as to permit
Windows services.
– (Only for the VPL-DX15) When the
projector is connected with two or more
computers via both wired and wireless
networks, the wired network connection
has priority. In this case, you cannot use
the Windows Vista® Network Projector
feature of the computer connected via a
wireless network by specifying the IP
Address of that projector.
not supplied) and USB hub (not supplied)
to use this feature.
• Be sure not to connect the USB mouse (not
supplied) and USB keyboard (alphabetic
layout 101/102 keys, not supplied) to the
projector directly. Connect them via a
USB hub (not supplied.)
• There are the following restrictions on the
Remote Desktop feature:
– The Windows Vista® Network Projector
feature is not suitable for reproduction of
moving images, as the update interval of
the image reproduction on the projector
is longer than that on the computer.
– Any wallpaper projected by the
projector using the Remote Desktop
feature is displayed in a single color.
– Reproduction of audio using the Remote
Desktop feature is not available.
Use of Network File Viewer
• To use the Network File Viewer feature,
the connected computer is required to
support network file sharing. The main
operating systems that support network
file sharing are as follows:
Use of Video Streaming
– Windows 2000 Professional
– Windows XP Home
– Windows XP Professional
– Windows Vista Home Premium
– Windows Vista Business
– Windows Vista Ultimate
• This feature does not support Windows
domain.
• Installation of Windows Media Encoder
on the connected computer and the
available system environment for
streaming delivery are required for use of
the Video Streaming feature. The versions
of Windows Media Encoder that support
the feature are as follows:
• Be sure to use one-byte characters for the
folder name (share name). Other
characters cannot be input the folder name
(share name) in the projector.
• There are restrictions on the folder names
and filenames on a file list. For details, see
• There are restrictions on the files that can
– Windows Media Encoder 9 Series
• The audio is not output from the projector
if not equipped with speakers.
• Depending on the system environment,
low-quality moving images may be
reproduced, or moving image cannot be
reproduced.
• The quality of the reproduced moving
images depends on the computer’s
performance.
• The highest resolution of the moving
images that can be reproduced is 720 ×
576 pixels. Those with higher resolution
cannot be displayed.
Use of Remote Desktop
• To use the remote desktop feature, the
connected computer is required to support
the Remote Desktop feature. The main
operating systems that support the Remote
Desktop feature are as follows:
– Windows XP Professional
– Windows Vista Business
– Windows Vista Ultimate
• Prepare a USB mouse (not supplied), USB
keyboard (alphabetic layout 101/102 keys,
Use of the Feature for
Monitoring and Operating the
Projector from a Computer via
a Web Browser
• When you monitor the information
regarding the projector and operate the
projector from a computer via a web
Precautions
7
Download from Www.Somanuals.com. All Manuals Search And Download.
browser, the connected computer is
required to have the following web
browser installed:
– Internet Explorer 5.0 or higher
• The supported languages are English and
Japanese only.
Types of Files
Available for
Browsing
The files to which you are permitted access
using Network File Viewer and USB File
Viewer are described below.
• files created with the following
applications of Microsoft Office 97/2000/
XP/2003
– PowerPoint (.ppt)
– Excel (.xls)
• Photo files
– JPEG (.jpg/.jpeg)
Use of USB File Viewer
• There are restrictions on the folder names
and filenames displayed on a file list. For
details, see “Restrictions on Folder Names
• There are restrictions on the files that can
be browsed. For details, see “Types of
• To prevent data from accidental loss, we
recommend that you back up data
frequently. Should data have been lost,
Sony will not be liable for damages of any
kind.
• Video (streaming video) files
– WMV (.wmv)*
* Only when the video format is WMV and
audio format is WMA
• It may take some time until the file list is
displayed after a USB memory is
connected.
• The data in the USB memory connected to
the projector via a USB hub cannot be
displayed.
• The projector cannot be connected with
the computer by connecting the USB cable
to the USB connector on the projector.
Notes
• The File Viewers of this unit are of simplified
type. They are inadequate to play the files
described above completely.
• The following languages can be used in
PowerPoint, and Excel files.
– Languages with single-byte characters
(English, French, etc.)
Some languages may not be displayed
correctly.
About the USB memory
– Japanese
• A USB memory up to 16 GB is used to
confirm the operation check for this
projector. However, the projector provides
no guarantee of the operation of every
USB memory.
• Be sure not to remove the USB memory
during accessing. If a file in the USB
memory is open, press the ENTER key to
close it before removing the USB memory.
• For the fonts that can be used for the
• It may take some time due to a file until the
contents of a file are displayed.
• It may take some time to turn a page of a
PowerPoint, or Excel file.
• Some graphics and effects in PowerPoint,
and Excel files may not be displayed
properly.
• Still image files of higher resolution than
1600 × 1200 pixels may not be displayed.
• Moving image files of higher resolution than
720 × 576 pixels may not be displayed.
• The following are recommended for video
files to be used with this product.
– Display size*: 720 × 576 (or 720 × 480)
pixels
– Video bit rate: 800 kbps (CBR)
– Frame rate: 15 fps
8
Types of Files Available for Browsing
Download from Www.Somanuals.com. All Manuals Search And Download.
– Audio bit rate: 64 kbps (CBR)
– Sampling rate: 44.1 kHz (stereo)
About Supported
Fonts
* When making the display size other than
the one before, be sure to make the
numbers of pixels a multiple of 16.
e.g.) 320 × 240 pixels, 640 × 480 pixels,
640 × 360 pixels
The fonts displayed correctly when using the
Network File Viewer and USB File Viewer
are described below. Any other font
specifications in a file will be substituted
with those of fonts described below, in
which case some characters may not be
displayed properly.
Alphabetical characters:
– Arial
– Courier
– Tahoma
– Times
– Symbol
Japanese characters:
– MS Gothic and MS P Gothic
About Supported Fonts
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Restrictions on
Folder Names and
Filenames on a File
List
There are the following restrictions on the
names of folders and filenames available for
browsing using the viewers equipped with
the projector:
• Languages available to display:
– Languages with single-byte characters
such as English, French, etc. In this case,
some characters may not be displayed
properly according to the language.
– Japanese
• Usable character count: up to 255 one-byte
characters
10 Restrictions on Folder Names and Filenames on a File List
Download from Www.Somanuals.com. All Manuals Search And Download.
B Preparation
Network Mode
Activating the
Network Features
Choose one of the four types of Network
Mode according to your network
environment.
To use the network features of the projector,
a peer-to-peer connection between the
projector and a computer or a connection of
both devices over a network is required.
There are four types of Network Mode
(VPL-MX25: 3 and 4/VPL-DX15: 1 to
4). Use one of the methods according to
your network environment.
Wired Connection (VPL-DX15 only)
1 Connection between the projector
and a computer
Use a cross type Ethernet cable for the
connection.
Projector
Before starting
There are precautions on use of the network
features. See “Use of Network Features” on
page 6 before you start using this feature.
Notes
• When you make a connection, a network
configuration such as an IP Address setting
may be required. For details, contact your
network administrator.
• If your network environment has changed,
set up the network configuration again.
Computer
For details on the connection and
configuration, see “Making a Wired
Activating the Network Features 11
Download from Www.Somanuals.com. All Manuals Search And Download.
2 LAN connection among the
Wireless connection
projector and computers
3 Connection between the projector
and a computer (Ad-hoc (Peer-to-
peer))
LAN
Projector
Projector
Computer
Access
point
Computer
Computer
For details on the connection and
configuration, see “Making a Wired
For details on configuration, see
12 Activating the Network Features
Download from Www.Somanuals.com. All Manuals Search And Download.
4 LAN connection among the
projector and computers
(Wireless Access Point)
About Simple Setting
The configuration with Simple Setting uses a
wizard, which prompts you to answer to
questions step by step.
LAN
The wizard enables easier configuration,
since it suggests a successful configuration
method.
Note
Use the menus to configure the settings, as the
configuration with Simple Setting is not
available in the following cases:
Access
point
– When 802.1x Authentication of a
wireless LAN is required to be set
– When you want to make a Data
Encryption setting for an Ad-hoc (Peer-
to-peer) connection over a wireless LAN
– When you change Common Setting
items such as Projector Name and
Password
Computer
– When you initialize the Network Setting
Projector
Computer
For details on the configuration, see
“Configuring Using “Simple Setting” for
Note
Setting of the security features, such as Data
Encryption and authentication, may be
required according to your network
environment. We recommend that you contact
your network administrator before
configuration.
Activating the Network Features 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Wired LAN connection
Making a Wired
Connection with a
Computer
(VPL-DX15 Only)
Projector
to
(network/
When you make a wired connection between
the projector and a computer, there are two
methods; peer-to-peer connection and wired
LAN connection.
RJ45) connector
Ethernet cable
(straight cable)
(not supplied)
1 Connect the
(network/RJ45)
connector on the projector to the
network connector on a computer or
on a LAN using an Ethernet cable (not
supplied).
Peer-to-peer connection
LAN
Hub or router
If the DHCP server is enabled on the
connected LAN, the IP Address is
assigned automatically.
Projector
to
(network/
RJ45) connector
2 Press the NETWORK key on the
remote commander.
The following menu appears:
Ethernet cable (cross
cable) (not supplied)
Windows Vista® Network Projector
Network Name (SSID):
Projector Name:
Network Address:
Projector Password:
Detail Information
Switch
SonyProj99808B8
192.168.0.1
to network
connector
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
Windows Vista®
.
Select:
Set:
Computer
If the assigned IP Address is displayed
under “Network Address”, the
connection is complete.
Note
When a peer-to-peer connection is made, set a
private IP Address (e.g. 192.168.0.1) for each
of the projector and computer.
When the IP Address is not
assigned automatically
The following menu appears.
We recommend that you use the “Simple
Setting” wizard for network configuration.
14 Making a Wired Connection with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
For the procedure for using the on-
screen keyboard, see “Using the On-
Windows Vista® Network Projector
Projector not connected to network.
Simple Setting
Detail Information
Switch
Set the Network setting
with Simple Setting or the Menu.
When you complete the settings, the
following menu is displayed on the
screen:
Simple Setting
Simple setting completed.
Select:
Set:
Close
Configuring Using Simple
Setting
Start from the display shown in “When the
IP Address is not assigned automatically.”
Prev.:
Set:
Exit:
Before starting
5 Press the ENTER key to quit “Simple
Input of the IP Address, Subnet Mask and
Default Gateway is required for the
configuration. Before starting, contact your
network administrator.
Setting.”
The specified IP Address is displayed
under “Network Address.”
Windows Vista® Network Projector
Network Name (SSID):
Projector Name:
Network Address:
Projector Password:
Detail Information
Switch
1 Press the v or V key on the remote
commander to select “Simple Setting”
then press the ENTER key.
SonyProj99808B8
192.168.0.1
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
The message “Simple Setting started.”
appears on the screen.
Windows Vista®
.
2 Press the B key.
The following menu appears:
Simple Setting
Select:
Set:
Notes
IP address not obtained automatically.
Enter manually.
• If the entered IP Address is not correct, the
connection will not be made even if the IP
Address is shown under “Network Address.”
• If you entered an incorrect IP Address, you
cannot correct the setting with “Simple
Setting.” In this case, initialize the settings,
referring to “Initializing the Network
Setting” on page 22, then configure the
settings again with “Configuring Using
the menu to set the IP Address, referring to
IP Address
.
.
.
.
.
.
.
.
.
Subnet Mask
Default Gateway
Prev.:
Select:
Set:
Exit:
3 Press the v or V key on the remote
commander to select “IP Address”
then press the ENTER key.
The on-screen keyboard appears.
4 Enter “IP Address” with the on-screen
keyboard. Input “Subnet Mask” and
“Default Gateway” as well.
Making a Wired Connection with a Computer 15
Download from Www.Somanuals.com. All Manuals Search And Download.
The message “Simple Setting started.”
appears on the screen.
Making a Wireless
Connection with a
Computer
3 Press the B key.
The following menu appears:
Simple Setting
Use Wireless network.
To prepare the computer
Select the Network Mode.
Prepare for a wireless connection on your
computer. For details, refer to the manual
supplied with your computer, online help, or
the Microsoft website.
Ad-hoc
Access Point
Note
If the network cable is connected to the
computer, “Simple Setting” for a wireless
network connection cannot be used. In this
case, unplug the network cable from the
computer, or use the menu of the projector to
configure the wireless LAN connection,
referring to “Configuring the Network Settings
Prev.:
Next:
Select:
Exit:
4 Press the v or V key to select “Ad-
hoc” then press the B key.
Simple Setting
Simple setting completed.
Wireless Standard:
Network Name (SSID):
802.11b/g
SonyProj2EA509
Close
Configuring Using Simple
Setting for Ad-hoc (Peer-to-
peer) Connection
Prev.:
Set:
Exit:
Note
Data Encryption is not available when peer-to-
peer connection is made using “Simple
Setting.” To encrypt data, see “Configuring the
5 Press the ENTER key to quit the
“Simple Setting” menu.
The “Network Name (SSID)” and
“Projector Name” are displayed on the
screen.
1 Press the NETWORK key on the
remote commander.
Windows Vista® Network Projector
The following menu appears:
Network Name (SSID):
Projector Name:
Network Address:
Projector Password:
SonyProj2EA509
SonyProj99808B8
Detail Information
Switch
Windows Vista® Network Projector
Projector not connected to network.
Simple Setting
Detail Information
Switch
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
Set the Network setting
with Simple Setting or the Menu.
Windows Vista®
.
Select:
Set:
The “Network Name (SSID),”
Select:
Set:
“Projector Name” and “Projector
Password” can be changed using the
2 Press the v or V key to select “Simple
Setting” then press the ENTER key.
16 Making a Wireless Connection with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Configure the settings on the
Windows Vista® Network Projector
Projector not connected to network.
connected computer.
Simple Setting
Detail Information
Switch
Open the [Wireless Network
Set the Network setting
with Simple Setting or the Menu.
Connection] menu on the computer to
select the same network as that
displayed under “Network Name
(SSID)” in the menu in step 5.
The connection between the projector
and the computer has been made and the
IP Address of the projector is displayed
under “Network Address.”
Select:
Set:
2 Press the v or V key to select “Simple
Windows Vista® Network Projector
Setting” then press the ENTER key.
Network Name (SSID):
Projector Name:
Network Address:
Projector Password:
SonyProj2EA509
SonyProj99808B8
169.254.163.130
The message “Simple Setting started.”
appears on the screen.
Detail Information
Switch
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
3 Press the B key.
The following menu appears:
Simple Setting
Windows Vista®
.
Use Wireless network.
Select:
Set:
Select the Network Mode.
Ad-hoc
Access Point
Note
It may take about one minute to obtain an
IP Address.
Prev.:
Next:
Select:
Exit:
Configuring Using “Simple
Setting” for Wireless Access
Point Connection
4 Press the v or V key to select
“Wireless Access Point” then press the
B key.
Before starting
The access point select menu appears.
SSID, Encryption Key, etc. is required to be
entered according to your wired Lan
environment. Consult your network
administrator.
Simple Setting
Select access point.
SSID 01
SSID 02
SSID 03
Note
Some security systems such as 802.1x
Authentication cannot be set with Simple
Setting. Use the menus of the projector to set
such security systems.
Prev.:
Next:
Select:
Exit:
1 Press the NETWORK key on the
remote commander.
Note
It may take some time to detect an access
point.
The following menu appears:
Making a Wireless Connection with a Computer 17
Download from Www.Somanuals.com. All Manuals Search And Download.
The “Simple Setting” wizard closes, and
the configured settings such as the IP
Address are displayed.
5 Press the v or V key to select the
access point to be used then press the
B key.
When the selected access point is
protected with any security system, the
menu that prompts to enter the security
Key is displayed.
Windows Vista® Network Projector
Network Name (SSID):
Projector Name:
Network Address:
Projector Password:
SonyProj2EA509
SonyProj99808B8
192.168.0.1
Detail Information
Switch
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
Simple Setting
This network is security protected.
Enter security key.
Windows Vista®
.
Data Encryption: WEP
Key
Select:
Set:
The Wireless Access Point connection is
completed.
Prev.:
Set:
Exit:
Notes
• If the IP Address has not been
automatically assigned, a message may
prompt you to enter the IP Address.
Enter it according to the instructions
displayed.
• If the entered IP Address is not correct,
the connection will not be made even if
the IP Address is shown under “Network
Address.”
If the selected access point is not
protected with any security Key, proceed
to step 8.
6 Press the ENTER key.
The on-screen keyboard appears.
7 Input the security Key with the on-
screen keyboard shown there.
Wrong IP address
The security Key is shown as [*****].
For the procedure for using the on-
screen keyboard, see “Using the On-
Windows Vista® Network Projector
Network Name (SSID):
Projector Name:
SonyProj2EA509
SonyProj99808B8
169.254.163.130
Detail Information
Switch
Network Address:
Projector Password:
8 Enter the security key numbers then
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
press the ENTER key.
Windows Vista®
.
Connection starts, and the message
“Simple setting completed.” appears on
the screen when the connection has been
completed.
Select:
Set:
Simple Setting
• If you entered an incorrect IP Address,
you cannot correct the setting with
“Simple Setting.” In this case, initialize
the settings, referring to “Initializing the
configure the settings again with
the IP Address, referring to “Configuring
Simple setting completed.
Wireless Standard:
Network Name (SSID):
802.11b/g
SSID 01
Close
Prev.:
Set:
Exit:
9 Press the ENTER key to quit “Simple
Setting.”
18 Making a Wireless Connection with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
The Wired Network Setting menu
appears.
Configuring the
Network Settings
Using the Menu
Wired Network Setting
IP Address Setting
IP Address
Auto (DHCP)
Confirm
Cancel
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subnet Mask
Default Gateway
Primary DNS
Use the menus to configure the settings, as
the configuration with Simple Setting is not
available in the following cases:
Secondary DNS
– When 802.1x Authentication of a
wireless LAN is required to be set
– When you want to make a Data
Encryption setting for an Ad-hoc (Peer-
to-peer) connection over a wireless LAN
– When you change Common Setting
items such as Projector Name and
Password
Select:
Set:
Exit:
4 Enter the necessary items using the v/
V/b/B key and ENTER key.
The on-screen keyboard appears when
the menu prompts you to enter values,
etc.
– When you initialize the Network Setting
For the procedure for using the on-
screen keyboard, see “Using the On-
Before starting
Entering the IP Address and the security Key,
etc. is required for the settings using the menus.
For the required items, contact your network
administrator before starting menu operation.
5 Select “Confirm” then press the
ENTER key once all the items have
been entered.
The Network Setting menu is restored,
and the entered settings are displayed.
Configuring the Wired
Network Setting (VPL-DX15
Only)
6 Press the MENU key to quit the
setting.
1 Press the MENU key on the remote
commander to display the menu.
Configuring the Wireless
Network Setting
2 Press the v/V/b/B key to select “To
Network Setting” in the Network
Setting menu then press the ENTER
key.
1 Press the MENU key on the remote
commander to display the menu.
The Network Setting menu appears.
2 Press the v/V/b/B key to select “To
Network Setting” in the Network
Setting menu then press the ENTER
key.
Network Setting
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto (DHCP)
Wired Network
Wireless Network
Common Setting
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
The Network Setting menu appears.
Select:
Set:
Exit:
3 Press the v or V key to select “Wired
Network” then press the ENTER key.
Configuring the Network Settings Using the Menu 19
Download from Www.Somanuals.com. All Manuals Search And Download.
802.1x Authentication:
Network Setting
“802.1x Authentication” is selectable
when:
– “Network Mode” is set to “Wireless
Access Point” and “Data Encryption”
is set to “WEP” in “Wireless
Network.”
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto (DHCP)
Wired Network
Wireless Network
Common Setting
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
– “Network Authentication” is set to
“WPA” or “WPA2” in “Wireless
Network.”
Select:
Set:
Exit:
When “802.1x Authentication” is
selected after setting as above, the
following menu appears:
3 Press the v or V key to select
“Wireless Network” then press the
ENTER key.
Wireless Network Setting - 802.1x Authentication
802.1x Authentication Disable
EAP Type
Close
The Wireless Network Setting menu
appears.
User Name
Password
Wireless Network Setting
Wireless Network
Wireless Setting
802.1x Authentication
IP Address Setting
IP Address
Enable
Confirm
Cancel
Auto (DHCP)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subnet Mask
Select:
Set:
Exit:
Default Gateway
Primary DNS
Secondary DNS
5 When all items are entered, select
“Confirm” then press the ENTER key.
Select:
Set:
Exit:
The Network Setting menu is restored,
and the entered settings are displayed.
4 Enter the necessary items using the v/
V/b/B key and ENTER key.
6 Press the MENU key to quit the
The on-screen keyboard appears when
the menu prompts you to enter values,
etc.
setting.
Note
For the procedure for using the on-
screen keyboard, see “Using the On-
If the entered IP Address is not correct, the
connection will not be made even if the IP
Address is shown under “Network
Address.”
Wireless Setting:
When “Wireless Setting” is selected, the
following display appears:
Wrong IP address
Wireless Network Setting - Wireless Setting
Windows Vista® Network Projector
Network Mode
Access Point
802.11b/g
Close
Network Name (SSID):
Projector Name:
Network Address:
Projector Password:
SonyProj2EA509
SonyProj99808B8
169.254.163.130
Detail Information
Switch
Wireless Standard
Network Name (SSID) SonyProj
Network Authentication Open
Data Encryption
Key
Disable
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
Windows Vista®
.
Select:
Set:
Exit:
Select:
Set:
20 Configuring the Network Settings Using the Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Select “Close” then press the ENTER
Configuring the Common
Setting Items
key when all items are entered.
The Network Setting menu is restored,
and the entered settings are displayed.
Input the Projector Name and set whether or
not to require input of a Password to operate
the Windows Vista® Network Projector
feature.
6 Press the MENU key to quit the
setting.
1 Press the MENU key on the remote
commander to display the menu.
2 Press the v/V/b/B key to select “To
Network Setting” in the Network
Setting menu then press the ENTER
key.
The Network Setting menu appears.
Network Setting
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto (DHCP)
Wired Network
Wireless Network
Common Setting
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Select:
Set:
Exit:
3 Press the v or V key to select
“Common Setting” then press the
ENTER key.
The Common Setting menu appears.
Common Setting
Projector Name
SonyProj9980B8
Close
Projector Password
Not required
Initialize Network Setting
Select:
Set:
Exit:
4 Enter the necessary items using the v/
V/b/B key and ENTER key.
The on-screen keyboard appears when
the menu prompts you to enter
characters and numerals, etc.
For the procedure for using the on-
screen keyboard, see “Using the On-
Configuring the Network Settings Using the Menu 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Initialize Network Setting
Reset OK?
Initializing the
Network Setting
OK
Cancel
All the network settings that were
configured can be reset to the factory preset
values.
5 When you want to reset the settings,
press the b or B key to select “OK”
then press the ENTER key.
1 Press the MENU key on the remote
commander to display the menu.
The dialog box to confirm the
initialization appears.
2 Press the v/V/b/B key to select “To
Network Setting” in the Network
Setting menu then press the ENTER
key.
Initialize Network Setting
Reset complete.
OK
The Network Setting menu appears.
Network Setting
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto (DHCP)
Wired Network
Wireless Network
Common Setting
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6 Press the ENTER key.
All the settings for the network are
initialized, and the Common Setting
menu is restored.
Select:
Set:
Exit:
7 Select “Close” then press the ENTER
key.
3 Press the v or V key to select
“Common Setting” then press the
ENTER key.
The Network Setting menu is restored.
8 Press the MENU key to quit this
The Common Setting menu appears.
setting.
Common Setting
Projector Name
SonyProj9980B8
Close
Projector Password
Not required
Initialize Network Setting
Select:
Set:
Exit:
4 Press the v or V key to select
“Initialize Network Setting” then
press the ENTER key.
The Initialize Network Setting dialog
box appears.
22 Initializing the Network Setting
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for Using
the USB File Viewer
Feature
Using the On-Screen
Keyboard
When you enter characters and numerals for
various settings, you can use the on-screen
keyboard displayed on the screen.
Use the v/V/b/B key and ENTER key on
the remote commander.
Prepare the following before using the USB
File Viewer feature.
Before starting
XXX
There are precautions on use of the USB File
Viewer. See “Use of USB File Viewer” on
page 8 before you start using this feature.
ABCDM
Delete
Space
OK
Connecting the USB Memory
All Clear
Cancel
Connect the USB Memory (not supplied) to
Select:
Set:
the
(USB) connector on the projector.
When character input is finished
Projector
Select “OK” and press the ENTER key on
the remote commander. The on-screen
keyboard disappears, and the operation
menu is restored.
USB memory
(not supplied)
To stop making the character input
Select “Cancel” and press the ENTER key
on the remote commander. The on-screen
keyboard disappears, and the operation
menu is restored.
Preparing for Using the USB File Viewer Feature / Using the On-Screen Keyboard 23
Download from Www.Somanuals.com. All Manuals Search And Download.
B Using the Network Features
with the v or V key then press the ENTER
key.
Running a
Switch
Presentation via a
Network—Windows
Vista® Network
Projector
Network Projector
Network File Viewer
Video Streaming
Close
Select:
Set:
Configuring the Settings on
the Computer
Before starting
1 Click [Start], then click
[All Programs]-[Accessories]-
[Connect to a Network Projector] on a
computer.
• Connect the projector and a computer via a
network. For details, see “Activating the
• There are the precautions on use of the
Windows Vista® Network Projector feature.
See “Use of Windows Vista® Network
you start using this feature.
The [Connect to a Network Projector]
window opens.
2 According to the instructions
displayed in the window, search for
the projector and connect with it.
Configuring the Settings on
the Projector
Available network projectors are listed
in the window. Select the projector with
the name described under “Projector
Name” of the menu shown in step 1 of
“Configuring the Settings on the
Projector.”
1 Press the NETWORK key on the
remote commander.
The input signal setting is set to
“Network.”
Check if “Windows Vista® Network
Projector” is displayed at upper left of
the menu.
If no available projector is detected,
enter the IP Address of the projector.
3 Enter the Password if “Projector
Password” is set to “Required” on the
projector.
Display of “Windows Vista® Network
Projector”
The password is shown under “Projector
Password” of the menu shown in step 1
of “Configuring the Settings on the
Projector.”
Windows Vista® Network Projector
Network Name (SSID):
Projector Name:
SonyProj2EA509
SonyProj99808B8
169.254.163.130
Detail Information
Switch
Network Address:
Projector Password:
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
4 Click [Connection].
Windows Vista®
.
The same display as that on the
computer is projected by the projector.
Select:
Set:
To end the connection
Click [Disconnect] in the dialog box of the
[Connect to a Network Projector] window
on the computer, or press the ENTER key on
the remote commander.
When “Windows Vista® Network
Projector” is not displayed at upper
left of the menu
Press the v or V key to select “Switch” then
press the ENTER key. The Switch menu is
displayed, and select “Network Projector”
For the configuration on the computer, refer
to the help or the Microsoft website.
24 Running a Presentation via a Network—Windows Vista® Network Projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch
Remote Desktop
Projecting a File
Stored on a Network
Directly—Network
File Viewer
Close
Network File Viewer
Video Streaming
Select:
Set:
Note
If “Network File Viewer” was selected,
this option is not shown in the Switch
dialog box. In this case, proceed to step 4.
Before starting
• Connect the projector and a computer via a
network. For details, see “Activating the
• There are precautions on use of the Network
File Viewer feature. See “Use of Network
File Viewer” in “Precautions” on page 7
before you start using this feature.
3 Press the v or V key to select
“Network File Viewer” then press the
ENTER key.
The Network File Viewer menu is
displayed.
Network File Viewer display
Configuring the Settings on
the Computer
Network File Viewer
Folder
\\
Connection
Set the file sharing to the folder that you will
be accessing from the projector.
User Name
Password
Detail Information
Switch
You can set file sharing with [Properties] in
the [Explorer] window for the folder on the
connected computer.
Notes
Select:
Set:
• Be sure to use one-byte characters for the
folder name (share name). Other characters
cannot be input in the projector.
• Be sure not to delete or move the file while it
is open with the Network File Viewer
feature.
4 Enter the “Folder” you are accessing
and “User Name” and “Password” of
the computer.
When you select an item to be entered
and press the ENTER key, the on-screen
keyboard is displayed.
For the configuration on the computer, refer
to the help or the Microsoft website.
Enter the folder name “\\(Computer
Name)\(Share name).”
Configuring the Settings on
the Projector
Computer Name: Check it under the
“Computer Name” tab of “System
Properties” on the computer.
Share name: Check it under the
“Sharing” tab of “Folder Properties” on
the computer.
1 Press the NETWORK key on the
remote commander.
The input signal setting is set to
“Network.”
For the procedure for using the on-
screen keyboard, see “Using the On-
2 Press the v or V key to select “Switch”
then press the ENTER key.
5 Select “Connection” then press the
The Switch dialog box is displayed.
ENTER key.
Projecting a File Stored on a Network Directly—Network File Viewer 25
Download from Www.Somanuals.com. All Manuals Search And Download.
The specified folder is accessed and is
displayed.
Operating a
Network File Viewer
Computer from the
Projector—Remote
Desktop
/
Name
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
Update
xxx
2009/02/10 100KB
Size
xxx
Upward
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx Name Order Up
xxx
xxx Disconnection
xxx
xxx
xxx
xxx
xxx
Before starting
• Connect the projector and a computer via a
• Prepare a USB mouse (not supplied), USB
keyboard (alphabetic layout 101/102 keys,
not supplied) and USB hub (not supplied) to
use the Remote Desktop feature.
• There are precautions on use of the Remote
Desktop feature. See “Use of Remote
you start using this feature.
Select:
Set:
6 Press the v or V key to select the file
you wish to display then press the
ENTER key.
The viewer of the application for the
selected file starts, and the file is
projected on the projector screen.
7 Operate the projector according to the
viewer activated.
Configuring the Settings on
the Computer
Before you operate the projector, change the
remote access setting of the connected
computer. From the [Start] menu, click
[Control Panel]-[System]-[System
To exit the file viewer
Press the ENTER key on the remote
commander.
Properties], and select the [Remote settings]
tab, then change the remote desktop setting.
For the configuration on the computer, refer
to the help or the Microsoft website.
Configuring the Settings on
the Projector
1 Press the NETWORK key on the
remote commander.
The input signal setting is set to
“Network.”
2 Press the v or V key to select “Switch”
then press the ENTER key.
The Switch dialog box is displayed.
26 Operating a Computer from the Projector—Remote Desktop
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch
Remote Desktop
Projector
Close
Network File Viewer
Video Streaming
Select:
Set:
to
(USB)
connector
Note
If “Remote Desktop” was selected, this
option is not shown in the Switch dialog
box. In this case, proceed to step 4.
USB hub
3 Press the v or V key to select “Remote
Desktop” then press the ENTER key.
The Remote Desktop menu is displayed.
Remote Desktop display
USB
mouse
USB keyboard
Remote Desktop
Press the "Connection" button. The "Remote
Connection
Desktop Connection" dialog box will open.
Connect a USB mouse and USB keyboard
to the projector for operations.
Detail Information
Switch
5 Select “Connection” then press the
ENTER key.
Press
to finish the Remote Desktop
Connection.
The Remote Desktop Connection dialog
is displayed.
6 Enter the computer name that you will
be remotely accessing, using the
connected USB keyboard (alphabetic
layout 101/102 keys), and click
“Connection,” using the connected
USB mouse.
Select:
Set:
4 Connect the USB hub to the
(USB) connector on the projector and
connect a USB mouse and USB
keyboard (alphabetic layout 101/102
keys) to the USB hub.
The logon dialog of Windows is
displayed. Operate according to the
instructions shown in the menus. You
can check the computer name by
clicking the [Computer name] tab of
[System Properties] of the computer.
Connection starts, then the same display
as that on the computer is projected by
the projector once the connection has
been completed.
7 Operate the computer with the
connected USB keyboard (alphabetic
layout 101/102 keys) and USB mouse,
while observing the computer picture
projected by the projector.
Operating a Computer from the Projector—Remote Desktop 27
Download from Www.Somanuals.com. All Manuals Search And Download.
To quit the connection
Log off the computer, or press the ENTER
key on the remote commander.
Projecting a
Streaming Video
Delivered via a
Network—Video
Streaming
For the configuration on the computer, refer
to the help or the Microsoft website.
Before starting
• Check that the projector and a computer are
connected over a network.
• There are precautions on use of the Video
Streaming feature. See “Use of Video
Streaming” in “Precautions” on page 7
before you start using this feature.
Configuring the Settings on
the Computer
• Install Windows Media Encoder in the
connected computer before using this
feature. You can download Windows
Media Encoder, free of charge, from the
Microsoft website.
• Before configuring the projector settings,
you should start Video Streaming on the
computer.
For the configuration and operation of
Window Media Encoder, refer to the help or
Microsoft website.
Configuring the Settings on
the Projector
1 Press the NETWORK key on the
remote commander.
The input signal setting is set to
“Network.”
2 Press the v or V key to select “Switch”
then press the ENTER key.
The Switch dialog box is displayed.
28 Projecting a Streaming Video Delivered via a Network—Video Streaming
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch
Remote Desktop
Monitoring and
Operating the
Projector Using a
Web Browser
Close
Network File Viewer
Video Streaming
Select:
Set:
Note
If “Video Streaming” was selected, this
option is not shown in the Switch dialog
box. In this case, proceed to step 4.
Before starting
• Connect the projector and a computer via a
network. For details, see “Activating the
• There are precautions on monitoring and
operating the projector via web browser. See
“Use of the Feature for Monitoring and
Operating the Projector from a Computer via
a Web Browser” in “Precautions” on page 7
before you start using this feature.
3 Press the v or V key to select “Video
Streaming” then press the ENTER
key.
The Video Streaming menu is displayed.
Video Streaming display
Video Streaming
URL http://
Connection
Detail Information
Switch
Enter the connected PC information.
Select:
Set:
4 Select “URL,” press the ENTER key,
then enter the URL with the displayed
on-screen keyboard.
name):(Port number)/.”
Computer name: Check the name on
the [Computer name] tab of [System
Properties] on the projector.
Port number: Enter the port number
used with Windows Media Encoder. The
number is set to “8080” at the factory.
5 Press the B key to select
“Connection” then press the ENTER
key.
The streaming video specified by the
URL are delivered and projected on the
projector screen.
To quit Video Streaming
Press the ENTER key on the remote
commander.
Monitoring and Operating the Projector Using a Web Browser 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing from the Computer
Confirming the Information
regarding the Projector—
Information
1 Start a browser of the computer
(Internet Explorer 5.0 or higher).
Click [Information].
You can confirm the current settings of the
projector on the computer. You cannot
change the settings of the computer with this
window.
2 Enter the address “http://
xxx.xxx.xxx.xxx” (IP Address of the
projector), to establish access to the
projector.
Note
If the browser of your computer is set to
[Use a proxy server] when you have access
to the projector from your computer, click
the check mark to set accessing without
using a proxy server.
After you have established access to the
projector, the following window
appears:
30 Monitoring and Operating the Projector Using a Web Browser
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the Computer—
Control
Setting the Network
Information
Click [Control].
Click [Network].
You can control the projector on the
computer. The functions of the buttons
shown in the window are the same as those
of the keys on the supplied remote
commander.
You can switch the Control window between
the [Easy Mode] and [Advanced Mode]
windows. The [Easy Mode] window shows
only the commonly used buttons, while the
[Advanced Mode] window shows all the
buttons on the remote commander.
You can change the wireless network or
wired network (VPL-DX15 only) setting.
After you change a setting, it will be
reflected in the projector if you click [Apply]
at lower part of the window.
Clicking [Advanced] opens the [Advanced
Mode] window.
Note
When the network setting is changed, the
network may have been disconnected.
The [Easy Mode] window is restored by
clicking [Easy] in the Control window.
Monitoring and Operating the Projector Using a Web Browser 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Projector—
Setup
Click [Setup].
The Setup menu dialog box appears.
You can set the Owner Information, Date
and Time, Password and Mail Report. When
each item is clicked, it is necessary to input
the User name and password. When using it
for the first time, click [OK] after inputting
“root” for “User name” and without
inputting anything for “Password.” When
you want to set the password, set it on a
The data input in each window are reflected
in the projector by clicking [Apply] at lower
part of each window.
Owner
Enter owner information.
Projector
Enter the location of the projector.
Memo
Enter a memo.
Date and Time
Setting the date and time is required for the
Regular Report function.
Owner Information
The information set up in this window is
used for the Mail Report feature.
Time Zone
Select the region where the projector is used.
Date/Time
Enter the year, month, day and time.
32 Monitoring and Operating the Projector Using a Web Browser
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Server
Enter the address of the time server to obtain
an accurate time information automatically.
Password
You can set the name and password for
[Administrator] and for [User]. The name of
the administrator is preset to “root.”
Notes
• To change the password, enter a new
password after deleting the password
(*****) that was set.
• If you forget your password, consult
qualified Sony personnel.
Mail Report
You can use the Mail Report function to do
the following:
x Report Timing field
• Periodically report the installation status
of the projector and owner information.
You can also specify the transmission days
of e-mail messages (Regular Report).
• Immediately send e-mail if any error
occurs with the projector (Error Report)
• Notify by e-mail of the replacement timing
of the projector lamp when use of the lamp
has reached the preset time (Lamp
Reminder)
• Notify by e-mail that maintenance of the
projector is required when use of the
projector has reached the preset time
(Maintenance Reminder)
Regular Report
A report on the present status, installation
status, etc. of the projector is periodically
sent by e-mail.
Set the timing for sending e-mail messages
as follows:
AT: Specify the time when e-mail is to be
sent. You can set the time by the hour.
Every Week on Days: Check this check box
to have e-mail sent on the selected days
every week.
Mon/Tue/Wed/Thu/Fri/Sat/Sun: Specify
the days of the week when e-mail is to be
sent. You can check two or more days of
the week.
Monitoring and Operating the Projector Using a Web Browser 33
Download from Www.Somanuals.com. All Manuals Search And Download.
sent if you do not check the Regular check
box. If the day preset in [Every Month on
Day] does not exist in the month, you will
receive the Regular Report on the last day of
the month.
• You cannot specify the day of the week or
day of the month if the [Every Week on
Days] or [Every Month on Day] check box is
not checked.
Every Month on Day: Check this check
box and select the day from the drop-
down list to have e-mail sent on the
selected day every month. The report
contains product information, owner
information, hours of use, lamp mode,
memos, etc.
Maintenance Report
Lamp Reminder: Check this check box and
enter the replacement time of the
projector lamp in the text box. This
information is used to have e-mail sent
informing you that lamp replacement is
required when the preset time has
reached. You can specify the time
between 1 and 9999 hours.
Maintenance Reminder: Check this check
box and enter the time of use before
maintenance is required for the projector
in the text box. This information is used
to have e-mail messages sent informing
you that maintenance of the projector is
required when the preset time has
reached. You can specify the time
between 1 and 99999 hours.
x Mail Form field
Select the e-mail message type from
[Standard] or [Simple].
x Mail Account field
Mail Address: Enter the appropriate e-mail
address. You can enter up to 64
characters.
Outgoing Mail Server (SMTP): Enter the
address of the SMTP server. You can
enter up to 64 characters.
Required Authentication: Check this
check box if authentication is required
for sending e-mail.
Requires the use of POP Authentication
before send e-mail (POP before
SMTP): Check this check box to
arrange for POP authentication to be
performed before connecting to the
SMTP server.
The length of time that elapsed since you
reset is displayed in the Elapsed Hours
text box. Checking the RESET check
box and clicking [Apply] resets the
elapsed time to zero.
Incoming Mail Server (POP3): Enter the
address of the POP3 server.
x Address field
Account Name: Enter the mail account.
Password: Enter the mail password.
SMTP Authentication: Check this check
box to arrange for SMTP authentication
to be performed before connecting to the
SMTP server.
Account Name: Enter the mail account.
Password: Enter the mail password.
Send test mail: Check the Send check box
then click [Apply] to have e-mail
messages sent as a test to confirm
whether it is sent to the specified
addresses.
Email Address
Enter the e-mail address to which you wish
e-mail messages sent in each text box. You
can have e-mail sent to four different
addresses at the same time. You can enter up
to 64 characters for each address.
Report Timing
Regular: Check this check box to have the
Regular Report sent.
Maintenance: Check this check box to have
the Maintenance Report sent.
Notes
Error: Check this check box to have an
error report sent when any trouble
occurs with the projector.
• If the following items have not been set or
are incorrectly set, an error message
appears and the test mail is disabled:
– [Address] in the Address field
– [Mail Address] and [Outgoing Mail Server
(SMTP)] in the Mail Account field
Notes
• Even if days are specified in the Report
Timing field, the Regular Report will not be
34 Monitoring and Operating the Projector Using a Web Browser
Download from Www.Somanuals.com. All Manuals Search And Download.
For details on the e-mail settings, contact
your network administrator.
• The Mail Report function is not available for
a network for which Outbound Port25
Blocking is used, as such a network cannot
be connected to the SMTP server.
x Check the contents of the mail
message
You can check the contents of e-mail to be
sent.
Advanced Menu
Click [Advanced Menu] to display the Font,
Advertisement, PJ Talk, SNMP, PJ Link and
Service buttons. These settings are mainly
for administrative use. For details, consult
qualified Sony personnel.
Note
You cannot use the following characters to
enter the characters in the text box: “ ' ”, “ “ ”,
“ \ ”, “ & ”, “ < ”, “ >. ”
Monitoring and Operating the Projector Using a Web Browser 35
Download from Www.Somanuals.com. All Manuals Search And Download.
B Using USB File Viewer
Projecting a File
Stored in the USB
Memory Directly—
USB File Viewer
Before starting
There are precautions on use of USB File
Viewer. See “Use of USB File Viewer” in
this feature.
1 Press the USB key on the remote
commander.
The input signal setting is set to “USB.”
2 Insert the USB memory into the
(USB) connector on the projector.
Files stored in the USB memory are
displayed on the screen.
USB
/
Name
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
Update
xxx
2009/02/10 100KB
Size
xxx
Upward
Sorting Order
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx
xxx Name Order Up
xxx
xxx
xxx
xxx
xxx
xxx
xxx
Select:
Set:
3 Press the v or V key to select the file
you wish to project.
4 Press the ENTER button.
The Viewer of the application that
corresponds the file starts then it is
projected on the screen.
5 Operate the projector according to the
viewer of the activated application.
36 Projecting a File Stored in the USB Memory Directly—USB File Viewer
Download from Www.Somanuals.com. All Manuals Search And Download.
B Using File Viewer
Monitoring the
Microsoft Office File
MonitoringthePhoto
File
The viewer of the application that supports
the selected file starts automatically.
You can operate each viewer by pressing the
keys on the remote commander.
Notes
• There are restrictions on the files to which
you are permitted access. See “Types of Files
• You cannot project an image on the screen by
zooming using the viewer.
Notes
• There are restrictions on the files to which
• Even if the viewer starts, operation of the
viewer is not available until operation guide
icons are displayed in the lower right portion
of the projected screen.
When you select a file with the extension
“.jpg” or “.jpeg,” the file viewer to monitor
the Photo file starts.
To display a different still image within
the file: Press the b (v)/B (V) key.
To display the control panel: Press the
ENTER key.
• You cannot project an image on the screen by
zooming using the viewer.
Monitoring the PowerPoint
File
To use the control panel
The control panel displayed by pressing the
ENTER key allows you to switch to Slide
Show mode (to display still images one by
one at certain intervals) or quit Photo File
Viewer.
When you select a file with the extension
“.ppt,” the file viewer to monitor the
PowerPoint file starts.
To move the slides forward or backward:
Press the b (v)/B (V) key.
To quit: Press the ENTER key.
Notes
• The display order of the still images cannot
be specified.
Monitoring the Excel File
• The still images are displayed with a certain
aspect ratio to fit the projected screen.
When you select a file with the extension
“.xls,” the file viewer to monitor the Excel
file starts.
To scroll in a sheet: Press the v/V/b/B key.
To scroll in a sheet quickly (only for
scrolling up or down): Press the v or V key
continuously.
To change the sheet: Press the b or B key
continuously.
To quit: Press the ENTER key.
Monitoring the Microsoft Office File / Monitoring the Photo File 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitoring the Video
File
Notes
• There are restrictions on the files to which
you are permitted access. See “Types of Files
• You cannot project an image on the screen by
zooming using the viewer.
When you select a file with the extension
“.wmv,” the file viewer to monitor the Video
file starts. The moving images are always
projected in the resolution of the images
recorded in the file.
To pause: Press the V key.
To cancel pause: Press the V key again
during pause.
To quit: Press the ENTER key.
38 Monitoring the Video File
Download from Www.Somanuals.com. All Manuals Search And Download.
B Others
Troubleshooting
Windows Vista® Network Projector
Symptom
Cause and Remedy
On your computer,
“Connect to a Network
Projector” cannot be
found.
• The operating system of your computer does not support “Connect
to a Network Projector.”
c Check the operating system that supports “Connect to a
The projector cannot be
detected.
• The projector is not turned on.
c Turn on the projector.
• The projector and computer are not connected over a network.
• Communications with the application may be blocked depending
on antivirus software you are using.
c Change the setting so as to authorize the Windows service.
Note
If you change the settings of the antivirus software, the computer may be
suffered by a virus attack.
• Windows Vista® Network Projector feature in the projector is not
running.
• The network segment (subnet) set on the computer is different
from that for the projector.
c Specify the IP address of the projector.
Moving images such as
animation effects created
with PowerPoint and
moving-image files are not
displayed properly.
c The Windows Vista® Network Projector feature is not suitable
for reproduction of moving images, as the update interval of the
image reproduction on the projector is longer than that on the
computer.
The program is shut down • The network has been disconnected.
in progress.
c Check the network connection. If disconnected, try to connect to
a network again.
The computer cannot
establish access to the
projector.
• The projector is connected to a different computer.
c Disconnect the connected computer then connect your computer
to the projector.
• The projector is connected to a computer with a higher resolution
than that of the projector.
c Set the connected computer to a lower resolution than that of the
projector.
c If your computer’s OS is Windows Vista Service Pack 1 or later
version installed, a dialog box is displayed, from which you can
execute conversion to a resolution lower than that of the
projector.
The resolution of the
projected image is
changed.
c It is a restriction on the Windows Vista® Network Projector
feature.
Troubleshooting 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause and Remedy
Any wallpaper of projected c It is a restriction on the Windows Vista® Network Projector
is displayed in a single
color.
feature.
The display colors of the
projected image are
changed.
c It is a restriction on the Windows Vista® Network Projector
feature.
Network File Viewer features
Symptom
Cause and Remedy
A folder name cannot be
entered.
c Only one-byte characters can be input for the folder name (share
name). If other characters are used, change them to the proper
ones.
A file list does not open.
• The computer is not turned on.
c Turn on the computer.
• The computer and projector are not connected over a network.
• Network sharing is not set for the folder you are accessing.
c Set network sharing.
• The operating system of your computer does not support network
sharing function.
c Check the operating systems that support network sharing
• You have entered an incorrect folder name.
c Check the folder name and enter it correctly.
• You have entered an incorrect password.
c Enter a correct password.
• You are trying to access the network shared folder using the
Windows domain function.
c The feature does not support the Windows domain function.
Remote Desktop
Symptom
Cause and Remedy
The desktop display of the • The computer is not turned on.
computer is not projected
by the projector.
c Turn on the computer.
• The computer and projector are not connected over a network.
• Remote access to the desired computer is not permitted.
c Have remote access permitted.
• The operating system of the computer does not support Remote
Desktop.
• The computer name is not correct.
c Enter the correct computer name.
• The computer is unable to log in.
c Enter the correct user name and password.
40 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause and Remedy
The computer name cannot • The IP address can be entered only with a USB mouse and USB
be entered.
keyboard (alphabetic layout 101/102 keys) connected to the
projector.
c Connect a USB mouse and USB keyboard (alphabetic layout
101/102 keys) to the projector.
The program is shut down • The network connection between the computer and a projector is
in progress.
servered.
c Check the network connection. If disconnected, try to connect to
a network again.
Moving images such as
animation effects created
by PowerPoint and
moving-image files are not
displayed properly.
c The Remote Desktop feature is not suitable for reproduction of
moving images, as the update interval of the image reproduction
on the projector is longer than that on the computer.
The mouse pointer
displayed on the projector
is different from that of the
computer.
c The shape of the mouse pointer projected is unique to the
projector.
Wallpaper of the projected c It is a feature of Remote Desktop.
image is displayed in a
single color.
Audio is not output.
c Audio from a computer is not reproduced on the projector with
the Remote Desktop feature.
Video Streaming
Symptom
Cause and Remedy
No picture is displayed.
• The computer and projector are not connected over a network.
• The Video streaming on the computer does not start, or it ends.
c Start video streaming with the Windows Media Encoder,
referring to the on-line help, Windows website, etc.
• You have entered an incorrect URL.
c It may not be playable, depending on the a network environment.
The displayed image is
deteriorated and noisy.
• The network bandwidth is narrow.
c Consult your network administrator.
• The configuration settings of the computer are not correct.
c Configure the Windows Media Encoder, referring to the on-line
help, Windows website, etc.
• The computer’s performance is low.
c Check that the computer supports Windows Media Encoder.
The program is shut down • The network connection between the computer and a projector is
in progress.
servered.
c Check the network connection. If disconnected, try to connect to
a network again.
The image is not projected c The image is displayed in the original resolution of the input
in full-screen display.
video source when Video Streaming is used.
Troubleshooting 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitoring and operating the projector via a web browser
Symptom
Cause and Remedy
The computer cannot
access the Web page of the
projector.
• The computer and projector are not connected over a network.
• The browser of the computer is set to [Use a proxy server for your
LAN].
c Set the IP address of the projector to [Use a proxy server for
your LAN].
• The version of the browser is old or a browser other than Internet
Explorer is be used.
c Use Internet Explorer version 5.0 or later.
USB File Viewer
Symptom
Cause and Remedy
The file list is unable to
open.
• The USB memory is not connected to the projector correctly.
Network File Viewer and USB File Viewer
Symptom
Cause and Remedy
The folder name or
filename is not displayed
correctly.
• An unsupported language or font for these features is used for the
name.
The file cannot be opened. • You are trying to open a file that is not supported by these features.
• The file is protected by a password.
c The projector does not support the password security function.
Cancel the password protection for the file on your computer.
Some fonts specifications • An unsupported font specification is converted to one usable with
in PowerPoint, or Excel
files will be forcibly
substituted.
this product.
The characters are not
displayed with PowerPoint,
or Excel files.
• Unusable characters (languages) are used.
Some graphics, effects, and • Unusable graphics, effects, or functions are used.
functions are not
reproduced properly with
PowerPoint, or Excel files.
c This product does not correspond to all graphics, effects, and
functions of PowerPoint, or Excel files. Change the graphics,
effects, or functions that are not reproduced to usable ones.
A photo file or video file is c It does not correspond to full-screen display.
not projected in full-screen
display.
42 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Network File Viewer
This feature allows you to project the data
stored on a Windows computer connected to
the projector over a network without data
conversion.
Glossary
Ad-hoc
Wireless communication complying with
the IEEE802.11 standard. A wireless
connection between two devices is enabled
without using an access point.
Video Streaming
This feature allows you to project video
streaming data delivered by Windows Media
Encoder directly.
Wireless Access Point
(Infrastructure)
Wireless communication complying with
the IEEE802.11 standard. A wireless
connection among two or more devices is
enabled via an Access Point.
Network File Sharing
When the projector is connected to a
Windows computer over a network, the
feature allows you to share files stored on the
computer.
Open systems
Projector Name
Systems to connect to a network without
using an authentication system. In this
system any device can be connected to a
network. Communication with a device that
is encrypted is not available, even if
connection has been made.
A name used to identify the projector
connected by the Windows Vista® Network
Projector feature.
Wireless Network
Communication via a wireless network that
complies with the IEEE802.11 standard
Simple Setting
A feature included with this projector for
connecting the projector to a network. This
setting mode uses a wizard that prompts you
to answer questions step by step.
Wired Network
Communication using an Ethernet cable that
complies with the IEEE802.11 standard
Remote Desktop
Key
This feature enables you to control a
Windows computer that is connected to the
projector over a network. The computer’s
desktop display is projected on the screen,
and you can operate the computer using a
keyboard and mouse connected via USB
connectors on the projector.
Encryption Key to encrypt data. Entering the
Key is required when using WEP/WPA-
PSK/WPA2-PSK.
Fixed IP Address
An IP Address that a user specifies. This is
not an IP Address that is automatically
assigned by DHCP.
802.1x Authentication
A standard that provides authentication and
creates and delivers a dynamic Encryption
Key
Subnet Mask
A bit sequence for specifying the subnet
from the IP Address
802.11b
Default Gateway
A part of the IEEE802.11 standards for
wireless network communication using the
2.4 GHz frequency band. The maximum
communication bit rate is 11 Mbps.
An address of a server (router) to traverse a
subnet for communication with a network
Network Authentication
Authentication system to connect to a
network
Glossary 43
Download from Www.Somanuals.com. All Manuals Search And Download.
802.11g
different MAC address, and you cannot
change the address.
A part of the IEEE802.11 standards for
wireless network communication using the
2.4 GHz frequency band
The maximum communication bit rate is 54
Mbps.
NTP Server
A server to synchronize the clocks of the
devices connected to a network using NTP
(Network Time Protocol)
802.11a
PEAP (MS-CHAP v2)
This protocol provides authentication based
on qualification information.
A part of the IEEE802.11 standards for
wireless network communication using the 5
GHz frequency band. The maximum
communication bit rate is 54 Mbps.
PJ Link
A standard to operate and manage the Data
Projectors
Advertisement
Protocol for identifying one’s own interface
on a network
POP Server
A protocol used when e-mail is transmitted
on the Internet.
DHCP (Dynamic Host Configuration
Protocol)
The feature to assign an IP Address
SMTP (Simple Mail Transfer Protocol)
Server
A protocol used when e-mail is received
from an e-mail server on the Internet.
automatically to a device connected to a
network. The DHCP server does not assign a
fixed IP Address but assigns the IP Address
to each device according to the situation.
SNMP (Simple Network Management
Protocol)
A protocol used to monitor and control
devices connected over a network
Primary DNS (Domain Name System)
Server
A server to identify the IP Address with the
host name (computer name). Normally, a
DNS server specified as Primary is used.
SSID (Service Set Identifier)
Identification data for a wireless LAN that
enables connection with other wireless
devices on the LAN. All wireless LAN
devices employing the same SSID can
communicate with one another.
Secondary DNS Server
A substitute DNS Server enabled when a
Primary DNS Server cannot be used
EAP (Extensive Authentication
Protocol)
A protocol adopted as the IEEE802.1x
authentication protocol
TKIP (Temporal Key Integrity
Protocol)
An encryption protocol that is the successor
of WEP. TKIP is designed to create a new
encryption key with every certain amount of
data and time then encrypt the data. It
provides stronger security for the data, since
such dynamic change of the encryption keys
renders any encryption of the key absolute.
IP Address
An address to identify each device on the
TCP/IP network
LAN (Local Area Network)
A network to be used in a limited area, such
as an office or home
WEP (Wired Equivalent Privacy)
MAC address
A security standard that is designed to
encrypt data for communication between
connected devices. Registering the same key
with the projector as that registered with the
An individual address to be assigned to an
individual network interface when it is
manufactured. Every interface has a
44 Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
connected computer allows access to that
computer.
Windows Media Encoder
Encoder software developed by Microsoft
Corporation
WMV (Windows Media Video)
A compressed video file format developed
by Microsoft Corporation.
WPA (Wi-Fi Protected Access)
A security standard for wireless LAN
connections. WPA supports TKIP with
powerful encryption level and IEEE802.1x
authentication.
WPA2
An expanded security standard of WPA.
Some methods of WPA2 require an
authentication server, and some do not
require it.
WPA2-PSK (Wi-Fi Protected Access
2-Pre-Shared Key)
This is a method for WPA2-PSK to activate
this security standard without an
authentication server.
WPA-PSK
This is a method for WPA to activate this
security standard without an authentication
server. With this method, authentication is
given to wireless LAN devices with a shared
key called “PSK.” Registering the same key
with the projector as that registered with the
connected computer allows access to that
computer.
URL (Uniform Resource Location)
Description that specifies the location of a
file resource (documents, images, etc.) on
the Internet. This corresponds to an address
of a file on the Internet. A URL consists of
type of information, server name, port
number, folder name, filename, etc.
Glossary 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|