3-271-374-12(1)
For Your Convenience
Please contact Sony directly if you:
• Have questions on the use of your television after reading your Operating Instruction manual
and Quick Setup Guide
• Experience difficulty operating your television
Contact Sony Customer Support at:
or to speak with a support representative:
United States
Canada
1-800-222-SONY (7669)
1-877-899-SONY (7669)
Sony will work to resolve your questions more quickly than your retailer or place of purchase.
Please Do Not Return the Product to the Store
SXRD Projection TV
Operating Instructions
KDS-Z60XBR5
KDS-Z70XBR5
Printed on 70% or more recycled paper.
Printed in Japan
© 2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
However, there is no guarantee that
CAUTION
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
Owner’s Record
Use the following Sony TVs with the following
TV-stand.
The model and serial numbers are located
at the rear of the TV. Record these
numbers in the spaces provided below.
Refer to them whenever you call upon
your Sony dealer regarding this TV.
Sony TV Model No.
encouraged to try to correct the interference by
one or more of the following measures:
KDS-Z60XBR5/KDS-Z70XBR5
Sony TV-Stand
SU-RS52U
Model No.
Model Name
s
s
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
Use with other TV-stands may cause instability
and possibly result in injury.
s
s
Serial No.
To Customers
Sufficient expertise is required for installing
the specified TV. Be sure to subcontract the
installation to a Sony dealer or licensed
contractor and pay adequate attention to safety
during the installation.
WARNING
To reduce the risk of fire or electric shock, do
not expose this TV to rain or moisture.
Pursuant to FCC regulations, you are
cautioned that any changes or modifications
not expressly approved in this manual could
void your authority to operate this
equipment.
Note
This television includes a QAM demodulator
which should allow you to receive
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
unscrambled digital cable television
Safety
s
s
programming via subscription service to a
cable service provider. Availability of digital
cable television programming in your area
depends on the type of programming and signal
provided by your cable service provider.
ATTENTION
Operate the TV only on 120 V AC.
Use the AC power cord specified by Sony
and suitable for the voltage where you use
it.
The plug is designed, for safety purposes,
to fit into the wall outlet only one way. If
you are unable to insert the plug fully into
the outlet, contact your dealer.
If any liquid or solid object should fall
inside the cabinet, unplug the TV
immediately and have it checked by
qualified service personnel before
operating it further.
If you will not be using the TV for several
days, disconnect the power by pulling the
plug itself. Never pull on the cord.
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
s
s
Trademark Information
Macintosh is a trademark of Apple Inc.,
registered in the U.S. and other countries.
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the TV’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
s
s
s
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the TV.
Blu-ray Disc is a trademark.
When disconnecting AC power cord, the
power cord should be easily accessible for
disconnection.
For details concerning safety precautions,
SXRD, “BRAVIA” and
,
Motionflow, Photo TV HD, S-Force, BRAVIA
Theatre Sync, , DMex and “x.v. Color” are
trademarks or registered marks of Sony
Corporation.
The TV shall not be exposed to dripping or
splashing and no objects filled with liquids,
such as vases, shall be placed on the TV.
“XMB” and “xross media bar” are the
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
Installing
s
s
s
The TV should be installed near an easily
accessible power outlet.
CAUTION
To prevent electric shock, do not use this
polarized AC plug with an extension cord,
receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.
“PLAYSTATION” is a registered trademark
and “PS3” is a trademark of Sony Computer
Entertainment Inc.
To prevent internal heat buildup, do not
block the ventilation openings.
Do not install the TV in a hot or humid
place, or in a place subject to excessive
dust or mechanical vibration.
Use the TV at temperatures between 41°F
(5°C) and 95°F (35°C).
If the TV is transported directly from a cold
to a warm location, or if the room
temperature changes suddenly, the picture
may be blurred or show poor color due to
moisture condensation. In this case, please
wait a few hours to let the moisture
evaporate before turning on the TV.
To obtain the best picture, do not expose
the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling or
to cover the windows that face the screen
with opaque drapery. It is desirable to
install the TV in a room where the floor and
walls are not of a reflective material.
Adobe is a registered trademark or a trademark
of Adobe Systems Incorporated in United
States and/or other countries.
Declaration of Conformity
s
s
Trade Name: SONY
Model: KDS-Z60XBR5/KDS-Z70XBR5
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
s
NOTIFICATION
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
The Four Steps to Full HD Experience:
Remote Control and TV Controls/
Inserting Batteries into the Remote
™
Operating Sony Brand Video
Programming Non-Sony Video
Using Other Equipment with Your Remote
To Change Inputs or Channels in the
Cable System or VHF/UHF Antenna
Cable System and VHF/UHF Antenna
Using HDMI Control for BRAVIA Theatre
Accessing the Equipment Connected to
Your TV.........................................................35
™
4. Setting Up the Channel List
Quick Setup Guide (separate volume)
Provides a variety of optional equipment
connection diagrams.
Customer Support
On-line Registration
United States
Canada
(Continued)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
Important
Safety
Instructions
13) Unplug this apparatus during
lightning storms or when unused
for long periods of time.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
14) Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the
4) Follow all instructions.
5) Do not use this apparatus near water.
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
6) Clean only with dry cloth.
7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
s
Be sure to observe the TV’s “For Safety” section on page 7.
Antennas
Outdoor Antenna Grounding
If an outdoor antenna is installed, follow the precautions below. An
outdoor antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can come
in contact with such power lines or circuits.
8) Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT
WITH THEM IS ALMOST INVARIABLY FATAL.
9) Do not defeat the safety purpose of
the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the other.
A grounding type plug has two
blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the
provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
Be sure the antenna system is grounded so as to provide some protection
against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in USA and Section
54 of the Canadian Electrical Code in Canada provides information with
respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
Antenna Grounding According to the NEC
Refer to section 54-300 of Canadian Electrical Code for Antenna
Grounding.
10) Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
Antenna lead-in
wire
Antenna discharge
unit (NEC Section
810-20)
Ground clamp
11) Only use attachments/accessories
specified by the manufacturer.
Electrical
service
equipment
Grounding
conductors (NEC
section 810-21)
Ground clamps
Power service grounding
electrode system (NEC
Art 250 Part H)
NEC: National
Electrical Code
6
Download from Www.Somanuals.com. All Manuals Search And Download.
s
Before carrying the TV, disconnect any accessories or cables.
Electric shock
Do not touch the AC power cord or the TV with a wet
hand. If you plug/unplug the AC power cord from the TV
with a wet hand, it may cause electric shock.
Cleaning
s
Clean the rear cover area of the TV regularly. Dust in the rear cover
area may cause a problem with the cooling system of the TV set.
s
Clean the cabinet of the TV with a dry soft cloth.
To remove dust from the screen, wipe it gently
with a soft cloth. Stubborn stains may be
For Safe Operations
Always switch off by pressing POWER button on the remote or the TV
first to ensure proper lamp cooling process.
removed with a cloth slightly dampened with
solution of mild soap and warm water. Never use
strong solvents such as thinner or benzine for cleaning. If the picture
becomes dark after using the TV for a long period of time, it may be
necessary to clean the inside of the TV. Consult qualified service
personnel.
Caution
Do not use the TV at altitudes higher than 3,000 m, as doing so might
cause malfunction.
s
Unplug the AC power cord when cleaning this unit.
Cleaning this unit with a plugged AC power cord
may result in electric shock.
About the TV
Although the TV is made with high-precision technology, black dots may
appear or bright points of light (red, blue, or green) may appear constantly
on the screen. This is a structural property of the panel and is not a defect.
Installation
On Contamination on the Screen Surface
s
If direct sunlight or other strong illumination shines on the screen,
part of the screen may appear white due to reflections from behind the
screen. This is a structural property of the TV.
The screen surface has a special coating to reduce reflections. To prevent
screen damage, clean the screen as follows:
s
s
Clean the screen with a soft cloth.
Do not expose the screen to direct illumination or direct sunlight.
To remove hard contamination, use a cloth moistened with a solution
of mild detergent and water. Do not spray cleaning solution directly
onto the TV. It should only be sprayed to moisten the cleaning cloth.
s
s
The picture quality may be affected by your viewing position. For the
best picture quality, install your TV according to “Recommended
When installing your TV against a wall, keep it at least 4 inches (10
cm) away from the wall.
s
Do not use any type of abrasive pad, alkaline cleaner, acid cleaner,
scouring powder, chemical cloth, or solvent such as alcohol, benzene
or thinner, as these may scratch the screen’s coating.
Projection Lamp
s
Your TV uses a projection lamp as its light source. It is time to replace
the lamp with a new one (not supplied) when:
Service
•
the message, “Projection lamp is nearing end of life. Please
replace the lamp.” appears on the screen,
the lamp replacement indicator on the front panel blinks in red,
screen images become dark,
Damage Requiring Service
Do not attempt to service the set by yourself since
opening the cabinet may expose you to dangerous
voltage or other hazards.
•
•
•
no image appears on the display after prolonged use.
Unplug the set from the wall outlet and refer servicing to
qualified service personnel.
s
s
In rare instances, the bulb may pop inside the lamp unit, but the lamp
unit is designed to contain all of broken glass pieces inside the lamp
When the lamp eventually burns out, you may hear a noticeable pop
sound. This is normal and is inherent in this type of lamp.
Replacement Parts
When replacement parts are required, be sure the service technician
certifies in writing that he has used replacement parts specified by the
manufacturer that have the same characteristics as the original parts.
Cooling Fans
This TV uses cooling fans. You may hear the noise of fans running,
depending on the placement of your TV. The noise may be more
noticeable during the night or when the background noise level is low.
Unauthorized substitutions may result in fire, electric shock or other
hazards.
Disposal of Used Batteries
To preserve our environment, dispose of used batteries according to your
local laws or regulations.
For Safety
For Customers in the United States
Be Careful When Moving the
TV
Lamp in this product contains mercury. Disposal of
these materials may be regulated due to
environmental considerations. For disposal or
recycling information, please contact your local
authorities or the Electronic Industries Alliance
(http://www.eiae.org).
When you place the TV in position, be careful
not to drop it on your foot or fingers.
Watch your footing while installing the TV.
Carry the TV in the Specified
Manner
If you carry the TV in a manner other than the specified manner and
without the specified number of persons, it may drop and a serious injury
may be caused. Be sure to follow the instructions mentioned below.
s
s
Hold the TV tightly when carrying it.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to the World of BRAVIA™
Thank you for purchasing this Sony BRAVIA™ high-definition television. The quality of the image
you see on your BRAVIA TV is only as good as the quality of the signal it receives. To experience
the full detail of your new BRAVIA TV, you need access to HD programming. Your BRAVIA TV can
receive and display HD programming from:
• Over-the-air broadcasting via HD-quality antenna
• HD cable subscription
• HD satellite subscription
• Blu-ray Disc™ Player or other external equipment
Contact your cable or satellite provider for information on upgrading to HD programming.
To learn more about HDTV, visit: http://www.sony.com/HDTV
The Four Steps to Full HD Experience: Set, Sound, Source, and Setup
Along with your BRAVIA TV set, a complete HD system requires an HD sound system, a
source of HD programming and proper setup connections. This manual explains basic setup
connect other optional equipment.
Picture Quality and Aspect Ratio
You can enjoy crisp, clear images, smooth movement and high-impact visuals from 1080 HD
signals. When you compare a high-definition signal to a standard analog signal, you will notice
a big difference. The 1080 HD signals provide more than twice the vertical resolution of the
standard TV signal.
High-definition and standard-definition signals are transmitted with different aspect ratios (the
width-to-height ratio of the image). HDTV uses a wider screen than conventional standard-
definition TV.
16:9 (high-definition) source
Most HDTV signals use a wide screen aspect ratio
of 16:9. The 16:9 fills your BRAVIA screen and
maintains a crisp, clear, vivid picture.
4:3 (standard-definition) source
Most standard-definition signals use a boxy 4:3
aspect ratio. When a 4:3 image is displayed on an
HDTV, you will see black bars on the sides. The
picture quality may not be as sharp as with HD
sources.
~
• You can use the Wide Mode function of the TV to adjust the 4:3 image to fit the entire screen (see pages 26, 40
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Home Menu: XMB (XrossMediaBar)
™
The XMB™ is a menu of BRAVIA features and input sources displayed on the TV screen. The
XMB™ is an easy way to select programming and adjust settings on your BRAVIA TV. Press the
HOME button on your remote control to access the XMB™.
Product Support
Clock/Timers
Media
Settings
Category
Bar
Sound
Screen
Video Options
TV
Category Object Bar
From the horizontal Media Category Bar you can control:
options).
• TV Channels: available channels are displayed on the vertical Category Object Bar.
• External Inputs: cable, satellite, VCR, DVD players or other inputs can also be selected
from the Category Object Bar for the External Inputs.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
1. Installing the TV
Preventing the TV from Toppling Over
As a protective measure, secure the TV as follows.
Carrying Your TV
Using the TV stand SU-RS52U
Carrying the TV requires four people.
Do not carry the TV by grasping only the front
panel. Avoid holding the bottom middle part of the
screen. Doing so may damage the panel.
Sony strongly recommends using the TV stand
SU-RS52U.
To secure the TV, use the two shafts and two
screws that were securing the Table-Top Stand.
Fasten the two shafts first, and then fasten the two
screws.
When moving the TV, hold it as shown in the
illustration below.
When lifting the rear and side, place the hands in
the holes on the lower portion of the cabinet.
Two persons should lift and support from the front,
while the other two lift the sides.
Screw
Shaft
~
• For more information, refer to the instruction guide
provided by the TV stand SU-RS52U.
If you have connected cables and cords, be sure to
unplug them before moving the TV.
To ensure the safety of children and the TV, keep
children away from the TV during installation.
Climbing on or pushing the TV or its stand may
cause it to fall and may damage the TV.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
When using other TV stands
When Installing Your TV against a Wall
Keep your TV at least 4 inches (10 cm) away from
the wall to provide proper ventilation. Blocking
the ventilation opening of the cooling fan may
damage the TV.
Table-Top
Stand
TV
stand
12 inches
(approx. 30 cm)
4 inches
(10 cm)
4 inches
(10 cm)
2
Never install the TV as follows:
3
Air circulation is blocked.
1
Screw the support belt (supplied) to the TV
1
2
stand with a wood screw (supplied).
Attach the support belt to the Table-Top Stand
with the securing screw (supplied) using a
coin, etc.
3
Adjust the length by pulling the support belt
toward you while holding the Table-Top
Stand.
Air blown into cooling fan.
~
• Be sure to take measures to prevent the TV from
toppling over and causing injury.
• The supplied wood screw may not be used depending
on the type of TV stand. In this case, or when the
securing strength is not enough, use commercial
1
3
screws /8 to /16 inch (3 to 4 mm) diameter to fit to the
TV stand. Consult your dealer about the types of
screw(s).
~
• Do not install the TV near any ventilation, as it may
affect the normal TV operating temperature.
• Be sure that the ventilation opening on the side of the
TV is not blocked by curtains or other materials.
• Dirt may accumulate near the ventilation when the TV
is placed against the wall depending on its material.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended Viewing Area
Screen
Your viewing position may affect the picture
quality.
To minimize reflection, the screen surface has a
special coating.
For the best picture quality, install your TV within
the areas shown below.
Inappropriate cleaning methods could damage the
screen surface. Special care is required.
Model
KDS-Z60XBR5
KDS-Z70XBR5
Viewing distance
min. 7.0 ft. (approx. 2.2 m)
min. 8.0 ft. (approx. 2.4 - 2.5 m)
Cleaning the Screen Surface
Dust and dirt on the screen can affect the picture
quality. To dust off the screen use a soft cloth. Be
sure to follow the cleaning instruction on page 7
for stubborn stains and dirt.
Horizontal Viewing Area
70 inc
60 inc
hes min.
Temporary Image Retention
min
hes min.
i
n
8.0 ft.
.
6.6 ft
6
.
6
f
(appr
t
7.0 ft.
.
When high contrast non-moving images such as
station logos and channel numbers are displayed
for a long period of time, there may be some image
retention on the screen. This is only a temporary
condition. Turning off the power for a while or
letting the TV run on another channel will
eliminate the image retention.
(app
(
a
p
p
o
x.
r(appr
x.
m
o
x
2.4
2.0 m)
50"
.
0
"
2
.
o0
-
2.5 m)
2.2 m)
)
65˚
65˚
65˚
65.
Projection Lamp
Vertical Viewing Area
Your TV uses a projection lamp as its light source.
As with any lamp, it has a lifespan and needs to be
replaced when the Lamp Indicator flashes or the
screen becomes darker. Your TV also has a
function to display a message, “Projection lamp is
nearing end of life. Please replace the lamp.” to let
you know that the lamp has reached its expected
lifespan. Note the following:
6
70 in
0
5
i
i
n
c
c
c
c
h
hes min
e
s
55
60 in
m
i
n
n
.
.
.
.
7
7
.
6
.
8.0 ft
h
hes min
e
s
0
f
m
t
.
.
.
.
(app
(
i
n
a
p
6 8
7.0 ft
p
r
r
r
r
8
o
o
o
o
f
t
xx.
.
2 m)
2.4
(app
2
(
a
.
.
2
1
p
p
-
m
m
)
)
2.5 m)
x
x.
.
1
2.2 m)
2
s
After turning on your TV, it may take a while
(one minute or less) before the picture
appears.
˚
30
30˚
s
When the projection lamp wears out, the
screen goes dark. Replace the lamp with a
new Sony XL-5200 replacement lamp (not
supplied).
s
After lamp is replaced, please set the Lamp
Replacement option in the General
~
• The light emitted from the lamp is quite bright when
your TV is in use. To avoid eye discomfort or injury,
do not look into the light housing when the power is
on.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Locating Inputs and Outputs
Left Side
2 IN
3 IN
1
2
VIDEO 2 IN
VIDEO
L
(MONO)
AUDIO
R
Item
Description
1 HDMI IN 2/3
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video equipment,
such as a set-top box, DVD player, Blu-ray Disc Player, A/V receiver as well as PC.
HDMI supports enhanced, or high-definition video, plus digital audio.
HDMI
~
• HDMI connection is necessary to view 480i, 480p, 720p, 1080i, 1080p and 1080/24p
formats. Note that this TV displays all video input signals in a resolution of 1,920 dots
× 1,080 lines.
• Be sure to use only an HDMI cable that bears the HDMI logo.
• When HDMI control compatible equipment is connected, communication with the
• When connecting a HDMI control compatible audio system with HDMI jack, be sure to
also connect to the OPTICAL OUT jack.
2 VIDEO 2 IN
VIDEO/
Connects to the composite video and audio output jacks on your A/V equipment such as
a VCR or other video equipment.
L(MONO)-
AUDIO-R
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Left Side Rear
IN
1
4
VHF/UHF/CABLE
4
1
2
PC IN
RGB
Press the two clamps to open
the cover.
3
REMOTE
qa
1
2
X
DMe
/
PC IN
AUDIO
1
3
0
9
Y
SERVICE
S VIDEO
P
B
R
3
DIGITAL
AUDIO
OUT
VIDEO
P
(OPTICAL)
1
L
1
(MONO)
L
L
L
AUDIO
AUDIO
R
AUDIO
R
AUDIO
R
R
COMPONENT IN
(1080p/1080i/
720p/480p/480i)
AUDIO OUT
VIDEO IN
HDMI IN
(VAR/FIX)
(VAR/FIX)
5
6
7
8
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
1 HDMI IN 1
HDMI/
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video equipment,
such as a set-top box, DVD player, Blu-ray Disc Player, A/V receiver as well as PC.
HDMI supports enhanced, or high-definition video, plus digital audio.
R-AUDIO-L
2 HDMI IN 4
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the
HDMI IN 1 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the
AUDIO IN (L/R) jacks of HDMI IN 1.
HDMI
DVI-to-HDMI cable
Audio cable
DVI-to-HDMI adapter
~
• HDMI connection is necessary to view 480i, 480p, 720p, 1080i, 1080p and 1080/24p
formats. Note that this TV displays all video input signals in a resolution of 1,920 dots ×
1,080 lines.
• Be sure to use only an HDMI cable that bears the HDMI logo.
• When HDMI control compatible equipment is connected, communication with the
• When connecting an HDMI control compatible audio system with HDMI jack, be sure
to also connect to the OPTICAL OUT jack.
3 PC IN
Connects to a personal computer’s video output connector using an HD15-HD15 cable
with ferrite core (analog RGB, not supplied). Can also be connected to other analog RGB
equipment.
(RGB/AUDIO)
~
• For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If this is the case, connect the adapter to the computer before connecting the
HD15-HD15 cable with ferrite core.
• If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen
4 VHF/UHF/CABLE RF input that connects to your Cable or VHF/UHF antenna.
5 VIDEO IN 1
Connects to the S VIDEO output jack of your VCR or other video equipment that has
S VIDEO. The S VIDEO provides better picture quality than composite video (6)
connection.
S VIDEO
If both composite video and S VIDEO are connected, S VIDEO signal has priority.
6 VIDEO IN 1/3
VIDEO/
Connects to the composite video and audio output jacks on your A/V equipment such as
a VCR or other video equipment.
L(MONO)-
AUDIO-R
7 COMPONENT IN Connects to your equipment’s component video (YPBPR) output jack and audio (L/R)
1/2 (1080p/1080i/ jacks. Component video provides better picture quality than the S VIDEO (5) or the
720p/480p/480i)/ composite video (6) connection.
L-AUDIO-R
~
• Component video (YPBPR) connection is necessary to view 480i, 480p, 720p, 1080i and
1080p formats. Note that this TV displays all video input signals in a resolution of
1,920 dots × 1,080 lines.
8 AUDIO OUT
Connects to the left and right audio input jacks of your analog audio equipment. You can
use these outputs to listen to your TV’s audio through your stereo system.
(VAR/FIX)
(Continued)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
9 DIGITAL AUDIO
Connects to the optical audio input of your digital audio equipment that is PCM/Dolby
Digital compatible. Dolby Digital Audio signal from the HDMI input will be output as
PCM. Dolby Digital Audio signal from digital channels will be output as it is.
OUT (OPTICAL)
x
0 DMe / SERVICE
This USB port is for service only unless you are connecting the optional BRAVIA
external module (DMe ).
x
qa REMOTE
This jack is for receiving the external control signal.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Connecting the TV
HD Cable Box/HD Satellite Box
You can also enjoy high-definition programming
by subscribing to a high-definition cable service or
a high-definition satellite service. For the best
possible picture, make sure you connect this
equipment to your TV via the HDMI or
component video (with audio) input on the back of
your TV.
Cable System or VHF/UHF Antenna
System
You can enjoy high-definition and standard-
definition digital programming (if available in
your area) along with standard-definition analog
programming.
~
Shown with HDMI Connection
• This TV is capable of receiving unscrambled digital
programming for both cable (QAM and 8VSB) and
external VHF/UHF antenna (ATSC).
Side rear of TV
IN
1
• It is strongly recommended that you connect the
antenna/cable input using a 75-ohm coaxial cable to
receive optimum picture quality. A 300-ohm twin lead
cable can be easily affected by radio frequency
interference, resulting in signal degradation.
4
PC IN
RGB
Cable or VHF/UHF (or VHF only)
75-ohm coaxial
Side rear of TV
cable
VHF/UHF/CABLE input
HDMI cable
CATV/Satellite
antenna cable
Cable System and VHF/UHF Antenna
System
HD cable box/
Use an optional A-B RF switch (not supplied) to
switch between the cable and over-the-air antenna
programming, as indicated below.
HD satellite box
A-B RF switch
Side rear of TV
A
B
Cable
VHF/UHF/CABLE input
Antenna
~
• Be sure to set the Cable setting to On or Off in the
Channel settings for the type of input signal you
(Continued)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Shown with DVI Connection
Side rear of TV
CATV/Satellite
antenna cable
IN
1
4
DVI-to-HDMI cable
HD cable box/
HD satellite box
PC IN
RGB
AUDIO-L
(white)
P
B
R
DIGITAL
AUDIO
OUT
VIDEO
P
(OPTICAL)
1
AUDIO-R
(red)
L
(MONO)
L
L
L
AUDIO
R
AUDIO
R
AUDIO
R
AUDIO
R
Audio cable
COMPONENT IN
(1080p/1080i/
720p/480p/480i)
AUDIO OUT
(VAR/FIX)
VIDEO IN
HDMI IN
~
• If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 1 (with DVI-to-HDMI
cable or adapter) jack and connect the audio jack to the AUDIO IN (L/R) jacks of HDMI IN 1. For details, see
page 15.
Shown with Component Connection
Side rear of TV
CATV/Satellite
antenna cable
REMOTE
1
2
HD cable box/
HD satellite box
X
DMe
/
PC IN
AUDIO
1
3
Y
SERVICE
S VIDEO
P
B
R
DIGITAL
AUDIO
OUT
VIDEO
P
(OPTICAL)
1
L
(MONO)
L
L
L
AUDIO
AUDIO
R
AUDIO
R
AUDIO
R
R
COMPONENT IN
(100p/1080
72p/480p80i)
AUDIO OUT
AR/FI)
HDMI IN
VIDEO IN
AUDIO-R (red)
AUDIO-L (white)
PR (red)
Component video cable
PB (blue)
Y (green)
Audio cable
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PC
Use the TV as a monitor for your PC.
Shown below with the HD15 to HD15 connection. This TV can also be connected to a PC with DVI or
HDMI output. (Refer to the separate Quick Setup Guide.)
Side rear of TV
IN
1
Connect to an HDMI compatible
PC with an HDMI cable.
4
HD15-HD15 cable
(analog RGB)
PC IN
RGB
REMOTE
Audio cable
(stereo mini plugs)
1
2
X
DMe
/
PC IN
AUDIO
1
3
Y
SERVICE
S VIDEO
P
B
DIGITAL
AUDIO
OUT
VIDEO
PR
(OPTICAL)
~
• Connect the PC IN jack to the PC using an HD15-
HD15 cable with ferrite core (analog RGB, not
supplied) and audio cable (page 15).
PC Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
Resolution
Signals
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Standard
Horizontal
(Pixel)
640
×
Vertical
(Line)
480
VGA
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
31.5
37.5
31.5
37.9
46.9
48.4
56.5
60.0
47.4
47.8
60.3
47.7
64.0
80.0
67.5
60
75
70
60
75
60
70
75
60
60
75
60
60
75
60
VGA
640
720
480
400
600
600
768
768
768
768
768
768
768
1024
1024
1080
VESA
VGA-T
SVGA
XGA
800
VESA Guidelines
VESA
800
1024
1024
1024
1280
1280
1280
1360
1280
1280
1920
VESA Guidelines
VESA
VESA
WXGA
VESA
VESA
VESA
VESA
VESA
SXGA
HDTV
• For the best picture quality, it is recommended to use
the signals (boldfaced) in the above chart with a 60 Hz
vertical frequency from a personal computer. In plug
and play, signals with a 60 Hz vertical frequency will be
detected automatically. (PC reboot may be necessary.)
~
• This TV’s PC input does not support Sync on Green or
Composite Sync.
• This TV’s PC VGA input does not support interlaced
signals.
• When in PC input, the edge of the picture may be
cropped, or a black frame may appear around the
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Equipment
Side rear of TV
2 IN
3 IN
IN
1
4
VIDEO 2 IN
PC IN
RGB
VIDEO
L
(MONO)
AUDIO
R
VHF/UHF/CABLE
REMOTE
1
2
X
DMe
/
PC IN
AUDIO
1
3
Y
SERVICE
S VIDEO
P
B
DIGITAL
AUDIO
OUT
Camcorder
VIDEO
PR
(OPTICAL)
1
L
(ONO)
L
L
L
Blu-ray Disc Player/PS3
DVD player
AUD
AUDO
R
AUDIO
R
AUDIO
R
R
COMPONENIN
(1080p/10i/
AUDIO UT
HDMI IN
VIDO IN
(V
AR/FX)
AR/F)
720p/48/48i)
Digital satellite receiver
Digital cable box
Audio system
Personal computer
Camcorder
VHF/UHF/CABLE
Digital audio equipment
Digital
recorder
Personal
computer
Analog audio equipment
(A/V Receiver/Home Theater)
VCR
Game system
Camcorder
~
• Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using HDMI Control for BRAVIA
Theatre Sync™
Bundling the Connecting Cables
You can bundle the connecting cables as illustrated
below.
This TV is equipped with BRAVIA Theatre Sync.
The HDMI Control function enables BRAVIA
Theatre Sync to allow communication between
Sony TV’s and Sony equipment. Only Sony
equipment with HDMI Control capability is
supported.
To Connect HDMI Control Equipment
Use an HDMI cable that bears the HDMI logo for
connection shown in the Quick Setup Guide
provided with the TV documentation.
Setting the HDMI Control
In order for the HDMI Control function to operate,
the TV and other Sony HDMI Control equipment
HDMI Control On. For other equipment, refer to
the operating instructions for that equipment.
1
2
HDMI Control Available with Your TV
Once the supported equipment is connected, the
following operations are available:
•
Turn off the equipment automatically when
you turn off the TV.
•
When the connected equipment is turned on
by One-Touch-Play, the TV will automatically
turn on and select the respective HDMI input.
•
Automatically turn on equipment listed under
the External Inputs on the XMB™ when
When a Sony A/V receiver with BRAVIA Theatre
Sync is connected, the following additional
operations are possible:
•
•
•
Turning on the A/V receiver when the TV is
turned on.
Automatically switching to the audio output of
the A/V receiver’s attached speakers.
Adjusting the volume and muting of the A/V
receiver with the TV’s remote control.
~
• The A/V receiver cannot be selected from the XMB .
™
21
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Setting Up the Channel List
– Initial Setup
The Initial Setup screen appears when you turn
on the TV for the first time.
~
• If you accidentally turn off the TV during the Initial
Setup process, the Initial Setup will restart from the
beginning when the TV is turned back on.
• The Auto Program may be canceled while the
channels are being scanned. Press RETURN first then
press either B/b on the remote control, highlight “Yes”
to cancel or “No” to resume Auto Program.
Initial Setup
Step 1 of 5
Please select a language. Language settings will apply to on screen display as
well as default audio for digital channels.
Highlight a choice and press
to continue.
To Run Initial Setup Again or Auto
Program at a Later Time
English
Español
Français
Select the Initial Setup feature from the XMB™
To Add Digital Channels
After you finish connecting the TV, you can run
Initial Setup to create a list of available analog
and digital channels if you have connected an
antenna or cable directly to the TV’s VHF/UHF/
CABLE input.
Use the Add Digital Channels feature as
installations.)
You will be prompted to select the language of
your choice to be used for all the on-screen
settings.
Use the remote control to navigate through the
Initial Setup:
To Display the Picture in Your Preferred
Aspect Ratio
Select the proper Wide Mode as described on
You may want to set up convenient features such
V/v button:
Allows you to highlight options
where applicable.
button:
Allows you to select the
highlighted option and advance
to the next screen.
B button:
Allows you to move back to the
previous screen.
b button:
Allows you to move to the next
screen.
Follow the help text provided on the screen to run
Auto Program with the connected signal source
or select Skip to skip the Auto Program if you
are receiving channels from a cable box or satellite
receiver and the VHF/UHF/CABLE input is not
connected. The Auto Program will scan for
available channels. When the Auto Program is
completed, the TV will display how many analog
and digital channels are found.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV Features
Remote Control and TV Controls/Indicators
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by matching
e and E on the batteries to the diagram inside the
Push and slide
to open.
battery compartment of the remote control.
Remote Control and TV Controls
Buttons located at the right side of the TV will operate the same as these buttons
on the remote control.
1
2
3
POWER
CHANNEL
VOLUME
INPUT
~
• The 5, PLAY and CH + buttons have a tactile dot. Use them as a reference
when operating the TV.
Button
Description
1 DISPLAY Press once to display the information pertaining to the
channel and/or program when available. The OSD (On Screen
Display) will time out in a few seconds or press again to
immediately turn off the display. You can also set the display
2 LIGHT
Press to illuminate the buttons on the remote control so that
you can control them easily even if the room is dark.
3
FUNCTION The FUNCTION button indicator lights up momentarily
Buttons
when pressed to show which external equipment the remote
control is operating. When the remote control is set to operate
the external equipment, these buttons will operate the
equipment you choose. You must first press one of these
FUNCTION buttons to operate the corresponding equipment.
See page 29 for programming the remote control.
(Continued)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Description
4 0-9 ENT
Press 0-9 to select a channel; the channel changes after two
seconds. Press ENT to change channels immediately.
5
Use with 0-9 and ENT to select digital channels.
For example, to enter 2.1, press
,
,
and ENT.
2
1
4
5
6 FREEZE
Press once to display a frozen image with the current program
in a window. Press again to return to the current program.
Freeze
6
7
8
9
Frozen
picture
Current
program
~
• With the Freeze feature active, some features are unavailable.
0
qa
• While the Freeze feature is active, pressing HOME will
deactivate Freeze and display the XMB™
.
• If Parental Lock settings are in use, only the frozen
picture view is available and the audio is disabled.
7 CC
Press to turn on and off the Closed Captions (CC). To
x
8 DMe
Press to access features in the optional BRAVIA external
information. The module may not be available in your region.
9 SOUND
Press to cycle through different sound settings: Dynamic for
enhanced treble and bass, Standard for spoken dialog and
Custom to customize the sound settings including the
Sound Booster setting.
0
FAVORITES Press once to display the stored favorite channel list.
You can store up to 30 channels in your Favorites list.
How to Add to Favorites
While tuned to the channel you want to add to the list, press
OPTIONS and highlight “Add to Favorites”, then press
A confirmation message of “Channel added to Favorites” will
appear for a few seconds.
.
How to Remove from Favorites
While tuned to a channel that exists in the Favorites list,
press OPTIONS and highlight “Remove from Favorites”,
then press
.
A confirmation message of “Channel removed from
Favorites” will appear for a few seconds.
~
Your Favorites list will be cleared each time you run Auto
qa RETURN Press to go back to the previous screen or exit from the screen
when displaying menu items and settings.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Description
ql
w;
qs BD, DVD When FUNCTION is selected with BD (Blu-ray Disc),
or STB DVD or STB, these buttons operate the video equipment you
Buttons
31.
&
m
PREV: Press to replay the current program from the
previous chapter mark (if any) or from the beginning of the live
TV cache.
REPLAY: Press to replay the current program for a set
period of time.
wa
ADVANCE: Press to advance forward a set period of
time when playing back a recorded program.
M
&
NEXT: Press to advance forward to the next chapter mark
(if any) or to live TV when playing back a recorded program.
m (fast reverse): Press to play a program in fast rewind
mode.
H PLAY: Press to play a program at a normal speed.
M (fast forward): Press to play a program in fast forward
mode.
X PAUSE: Press to pause playback.
x STOP: Press to stop the playback of a recorded program.
qs
qd
qd THEATER Press to turn on and off the Theater Mode. The picture
settings will be set for a cinema-like experience and the audio
will be switched to the audio output of the attached speakers
of your BRAVIA Theatre Sync audio system.
Your BRAVIA Theatre Sync audio system must be connected
qf
qf MUTING
Press to mute the sound. Press again or press VOL + to restore
qg
qh
qj
qk
the sound.
qg VOL +/–
Press to adjust the volume.
qh DVR/VCR z REC: Press to record. Pressing this button alone starts the
Record
Buttons
recording process.
X REC PAUSE: Press to pause the recording.
x REC STOP: Press to stop the recording.
qj BD/DVD
Press to display the top menu of the BD/DVD disc.
Press to display the BD/DVD disc menu.
TOP MENU
qk BD/DVD
MENU
~
• For more information, refer to the operating manual of the
connected equipment.
ql POWER
Press to turn on and off the external equipment selected by the
FUNCTION buttons 3.
w; TV
Press to turn on and off the TV.
POWER
wz SLEEP
Press repeatedly until the TV displays the time in minutes
(Off, 15min, 30min, 45min, 60min, 90min or 120min)
that you want the TV to remain on before shutting off. To
cancel Sleep Timer, press SLEEP repeatedly until Off
appears.
(Continued)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Description
ws JUMP
Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel
that was selected.
JUMP
JUMP
wd WIDE
Press repeatedly to step through the Wide Mode settings:
Wide Zoom, Normal, Full, Zoom. The Wide Mode
40).
ws
wd
Changing the Wide Screen Mode
(For PC timing, see below)
4:3 Original source
Standard-definition source
16:9 Original source
High-definition source
m
m
Wide Zoom
Wide Zoom
Normal
Full
Normal
Full
Zoom
Zoom
Changing the Wide Screen Mode for PC Timing
Incoming PC signal
Less than 16:9 PC format
Incoming PC signal
16:9 PC format
m
m
Normal
Full 1
Full 2
Zoom
(May not be
available in
some
Normal
Full 1
(May not be
available in
some
formats.)
formats.)
Zoom
(May not be
available in
some
(May not be
available in
some
formats.)
formats.)
~
• It is normal to have a black frame surrounding the picture
with all input formats.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Description
wf PICTURE Press repeatedly to cycle through the available picture modes:
Vivid, Standard, Cinema, Photo, Custom. (Available
options depend on the current mode.) The picture modes can
also be accessed in the Picture settings. For details, see
wg INPUT
Press to display the list of External Inputs and TV mode.
Press repeatedly to toggle through the inputs.
~
• Inputs can be changed by pressing V/v and
while the list
of External Inputs is displayed.
including the Skip feature.
wf
wg
wh
wj
wk
wh V/v/B/b
Press V/v/B/b to move the on-screen cursor. Press
select/confirm an item.
to
wj OPTIONS Press to display a list of convenient functions and menu
shortcuts. The OPTIONS menu items vary based on input
and content.
Menu Item
Picture
Sound
P&P or PIP
Exit P&P or Exit PIP
Motion Enhancer
Speakers
Reference Page
See page 37
See page 39
See page 34
See page 34
See page 42
See page 44
See page 24
wl
e;
Add to Favorites/
Remove from Favorites
MTS
See page 43
See page 44
See page 46
See page 40
Alternate Audio
Digital Rating
Screen
~
• Motion Enhancer can only be set for the current input.
• When Digital Rating is selected, an icon appears to inform
you of the current program's digital rating.
wk HOME
Press to display the TV Home Menu/XMB to access the TV
™
Home Menu items such as the TV Settings TV channels and
,
External Inputs list (see pages 9 and 35).
Product Support
Clock/Timers
Sound
Screen
Video Options
TV
Press HOME again to exit the XMB
.
™
wl CH +/–
Press to scan through channels. To scan quickly through
channels, press and hold down either +/–.
e; F1/F2
Press to select the function of connected components. For
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicators
5
1
2
3
4
TIMER
LAMP
POWER
Item
Description
1 Speaker
2 TIMER LED
Outputs the audio signal.
Lights up in orange when the timer is set. This LED will remain lit even if the TV is
3 LAMP LED
4 POWER LED
Lights up in green when the TV is turned on. Also lights up in red during the diagnostics.
5 (IR) Infrared
Receives IR signals from the remote control.
Point the remote control at the center of the TV screen.
Receiver
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press
while the FUNCTION button is lit.
Programming the Remote
Control
The selected FUNCTION button will blink
twice if your equipment is programmed
correctly and five times if it is not.
To Confirm the Programming
2
3
If you can turn on and off the equipment by
POWER
pressing the green
button, then the
programming is complete. If not, try the next code
listed.
~
• In some cases, you may not be able to program your
remote control. If this is the case, use your equipment’s
own remote control.
• Any one of the FUNCTION buttons can be
programmed to operate other equipment regardless of
the labeling. For example, if programmed with the
2
4
correct code,
can operate DVD/VCR combo
equipment. This is useful if your equipment does not
match the labeled buttons available. Make note of your
equipment’s programmed button.
• You may program one equipment per FUNCTION
button.
Operating Sony Brand Video
Equipment
The remote control is preset as indicated below so
that you do not need to program the remote
control.
Sony Equipment
Programmable Code Number
101 (Sony Blu-ray Disc Player)
751 (Sony DVD Player)
BD
DVD
STB
801 (Sony Satellite Receiver)
Programming Non-Sony Video
Equipment
Follow the steps below to program your TV’s
remote control.
1
In the space provided below, write down the
three-digit code of your equipment found on
the Manufacturer’s Codes List on page 30.
If more than one code is listed, try entering
the code listed first.
Code No.
2
3
Press and hold
simultaneously to light the FUNCTION
button.
,
or
and
Enter the three-digit code using
-
while
the selected button is lit. If the code is not
entered within 10 seconds, you must repeat
step 2.
(Continued)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
VCRs
Manufacturer’s Codes
Manufacturer Code
Signature 2000
(M. Ward)
SV2000
327, 338
Manufacturer Code
Sony
DVD Players
301, 302, 303
(VHS, 8mm, Beta)
348
327
338
Manufacturer Code
Sylvania
Symphonic
Tashiro
Tatung
308, 309, 310, 338
338
332
314, 336, 337
314, 336, 337, 338
308, 309
311, 312
327, 328, 331, 332,
335
Sony DV
Admiral
(M. Ward)
Aiwa*
Audio Dynamic 314, 337
Broksonic
Canon
Citizen
Craig
Curtis Mathes
Daewoo
DBX
Dimensia
Emerson
Sony
751, 763
General Electric/ 755
RCA
338, 344
Hitachi
758
Teac
JVC
756
Technics
Toshiba
Wards
317, 319
308, 309
332
302, 332
304, 309, 338
309, 312, 341
314, 336, 337
304
316, 317, 318, 319,
320, 341
330, 335
338
Magnavox
Mitsubishi
Oritron
757
761
759
Panasonic
Philips
753
757
Yamaha
Zenith
314, 330, 336, 337
331
Pioneer
752, 778
RCA/PROSCAN 755
Cable Boxes
Samsung
Toshiba
Zenith
758
754
760, 762
Manufacturer Code
Sony
230
Fisher
Funai
Hamlin/Regal
222, 223, 224, 225,
226
DVD/VCR Combo Units
General Electric 304, 309, 329
Go Video
Goldstar
Hitachi
Instant Replay
JC Penney
Jerrold, General 201, 202, 203, 204,
Manufacturer Code
Instrument or
Motorola
Oak
205, 206, 207, 208,
218, 222
227, 228, 229
322, 339, 340
332
304, 305, 306, 338
Sony
Broksonic
JVC
Panasonic
Samsung
Toshiba
Zenith
767
776
775
777
774
773
768
Panasonic
Pioneer
219, 220, 221
211, 214, 215
308, 309
304, 305, 309, 314,
330, 336, 337
314, 336, 337, 345,
346, 347
Scientific Atlanta 209, 210, 211
Tocom
Zenith
216, 217
212, 213
JVC
Kenwood
LG
LXI (SEARS)
314, 332, 336, 337
332
305, 330, 332, 335,
338
308, 309, 310
314, 336, 337
332
309, 335
304, 305
HDD/DVD Combo Units
Satellite Receivers
Manufacturer Code
Manufacturer Code
Sony
770, 771, 772
Sony
801
Magnavox
Marantz
Marta
Memorex
Minolta
Mitsubishi/MGA 323, 324, 325, 326
Multitech
NEC
Olympic
Optimus
Orion
Panasonic
Pentax
DirecTV
Dish Network
Echostar
902, 903
810
810
DVD Changers
Manufacturer Code
General Electric 802
Sony
Panasonic
765
766
Hitachi
Hughes
Humax
JVC
805
804
902, 903
810
321, 325, 338
314, 336, 337
308, 309
327
317
306, 307, 308, 309
304, 305
308, 309
308, 309, 310
308
306, 308, 309
DVR
Manufacturer Code
LG
902, 903
809
803
Sony
901
Mitsubishi
Panasonic
Philips
DirecTV
Samsung
902, 903
902, 903
811, 902, 903
RCA/PROSCAN 802, 808, 902, 903
Philco
Blu-ray Disc Player (BD)
Toshiba
806, 807
Philips
Pioneer
Quasar
Samsung
812, 902, 903
Manufacturer Code
Sony
101, 102, 103
* If an Aiwa VCR does not work even
though you enter the code for Aiwa,
enter the code for Sony instead.
RCA/PROSCAN 304, 305, 308, 309,
5.1ch DVD AV System
310, 311, 312, 313,
329
309, 324, 328, 330,
335, 338
Manufacturer Code
Realistic
Sony (DAV)
601, 602, 603, 604
Sansui
Samsung
Sanyo
Scott
314
313, 321, 322
330, 335
312, 313, 321, 323,
324, 325, 326, 335
AV Receivers
Manufacturer Code
Sony
764
Sharp
327, 328
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Other Equipment with
Your Remote Control
Make sure that the equipment is programmed on
To Do This ...
Stop
Press ...
x
Fast forward
Rewind the tape
M
m
Press INPUT repeatedly until you see the video
input on the screen for your connected equipment.
Remote control tips are provided below.
X (press again to resume
normal playback)
Pause
DVD Player or DVD Changer
~
To Do This ...
Press ...
• Equipment marked with an (*) below may not
necessarily be activated by the suggested button if it
has been programmed with another FUNCTION
button.
Activate the remote control to operate
the DVD
DVD (FUNCTION)
Turn on/off
POWER
F1
• Use the remote control supplied with your connected
equipment if a function cannot be operated.
If you have a DVD changer, to skip
disc
Play
Stop
H
x
Cable Box
To Do This ...
Press ...
X (press again to resume
normal playback)
Pause
Activate the remote control to operate
the cable box
STB (FUNCTION)
m to fast reverse or M to
fast forward the disc when
pressed during playback
Step through different
tracks of the disc
Turn on/off
POWER
0-9, ENT
CH +/–
JUMP
Select a channel
Change channels
Back to previous channel
Step through different chapters of the > to step forward or . to
disc
step backward
Select a track directly
0-9, ENT
BD/DVD MENU or TOP
MENU
Display the disc menu or top menu
Satellite Receiver
Operate the DVD menu
Display the system MENU
Return
V v B b,
HOME
To Do This ...
Press ...
Activate the remote control to operate
the satellite receiver
STB (FUNCTION)
RETURN
Turn on/off
POWER
0-9, ENT,
CH +/–
Blu-ray Disc Player (BD)
Select a channel
To Do This ...
Press ...
Change channels
Activate the remote control to operate
the Blu-ray Disc Player
Back to previous channel
Display channel number
Display SAT Guide
Display SAT Menu
Move highlight (cursor)
Select item
JUMP
BD (FUNCTION)
DISPLAY
OPTIONS
HOME
Turn on/off
Play
POWER
H
Stop
x
V v B b
X (press again to resume
normal playback)
Pause
m to fast reverse or M to
fast forward the disc when
pressed during playback
Step through different tracks of the
disc
VCR*
To Do This ...
Press ...
Display the POP UP menu (BD)
Display the disc menu (DVD)
Display the top menu (BD)
Display the top menu (DVD)
Operate the menu
BD/DVD MENU
BD/DVD MENU
BD/DVD TOP MENU
BD/DVD TOP MENU
V v B b,
Activate the remote control to operate
the VCR
STB (FUNCTION)
Turn on/off
INPUT SELECT
Select a channel
Change channels
Record
POWER
INPUT
0-9, ENT
CH +/–
z
MENU ON/OFF
HOME
Play
H
(Continued)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
To Do This ...
Press ...
To Do This ...
INPUT SELECT
MENU ON/OFF
Press ...
INPUT
Specify the previous chapter/track
Specify the next chapter/track
.
>
HOME
Return to the previous display
RETURN
HDD/DVD Combo Unit
5.1ch DVD AV System (Sony DAV)
To Do This ...
Press ...
To Do This ...
Press ...
Activate the remote control to operate
the DVD/HDD
DVD (FUNCTION)
POWER
Activate the remote control to operate
the DVD
DVD (FUNCTION)
Turn on/off
Turn on/off
POWER
F1
Select the HDD
Select the DVD
F1
F2
Select other equipment connected to
the DAV
Play
H
x
Disk skip
F2
Stop
Pause
BD/DVD MENU or TOP
MENU
Display the disc menu or top menu
X
Search the picture forward or
backward
Select a track directly
0-9, ENT
M or m during playback
Play
H
x
Move highlight (cursor)
and select
V v B b,
Stop
Pause
Record
z
x
X
X
Record stop
Record pause
Search the picture forward or
backward
M or m during playback
Specify the previous chapter/track
Specify the next chapter/track
.
>
Specify the previous chapter/track
Specify the next chapter/track
.
>
Move highlight (cursor)
Select item
V v B b
Replay
Advance
Master volume
VOL +/–, MUTING
BD/DVD MENU or TOP
MENU
Display the disc menu or top menu
INPUT SELECT
INPUT
DVD/VCR Combo Unit
MENU ON/OFF
HOME
To Do This ...
Press ...
Search DVD by title or chapter
Return to the previous display
OPTIONS
RETURN
Activate the remote control to operate
the DVD/VCR
DVD (FUNCTION)
POWER
Turn on/off
AV Receiver*
Select the DVD
Select the VCR
F1
F2
To Do This ...
Press ...
BD/DVD MENU or TOP
MENU
Display the disc menu or top menu
Activate the remote control to operate
the AV Receiver
STB (FUNCTION)
Play
H
x
Turn on/off
POWER
Stop
Pause
Master volume
VOL +/–, MUTING
X
Select other input connected to AV
receiver
F1
Search the picture forward or
backward
M or m during playback
Move highlight (cursor)
and select (DVD)
DVR*
V v B b,
To Do This ...
Press ...
Record (VCR)
z
Activate the remote control to operate
the DVR
CH +/– or 0-9, ENT
(using tuner)
DVD (FUNCTION)
Change channels (VCR)
Turn on/off
Play
POWER
CH +/–
(during tape playback)
Adjust tracking (VCR)
Index search
H
. >
32
Download from Www.Somanuals.com. All Manuals Search And Download.
To Do This ...
Press ...
Replay the current program for a set
period of time
Advance forward a set period of time
when playing back a recorded program
Specify the previous chapter mark
Specify the next chapter mark
.
>
Stop
x
Pause
X
Record
z
Open the Favorites List
Open the Guide
Open Main Menu
Move highlight (cursor)
Select item
FAVORITES
OPTIONS
HOME
V v B b
Close on-screen display
Page +/-
RETURN
CH+/-
Open the RECORDINGS List
TOP MENU
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using P&P and PIP Features
~
This TV comes with the P&P and PIP features
which allow you to view two pictures
simultaneously. P&P (picture and picture)
provides two windows side by side. PIP (picture in
picture) provides PC input signal and TV
channels.
• To swap audio in P&P mode, use the B/b button to
swap the highlight between the main window and sub
window.
• To swap audio in PIP mode, press OPTIONS, then
press V/v to highlight Audio Swap.
• 1080p signal cannot be displayed for Component 1/2
in the sub window in P&P mode.
• For compatible PC Timings, refer to the PC Input
~
• The VHF/UHF/CABLE input must be connected to
use the PIP feature.
• For the PIP feature, Closed Caption (CC) is not
available.
To Change Inputs or Channels in the
Window
P&P
Press B/b to highlight the window to change, and
press INPUT to select the input to watch, or press
CH +/– to change channels or enter the channel
number using the 0-9 numeric buttons.
Sub window
Main window
~
PIP
• You may also press JUMP to change channels.
• Inputs with Skip applied will not appear in the list of
settings).
Sub window
(Location of
the sub
window can
be moved by
pressing
Main window
(PC)
To Change the Window Size of P&P
V/v/B/b.)
Press B/b to highlight the window, and press V/v
to change the window size.
To Display the Sub Window
1
Press OPTIONS to display the OPTIONS
menu while watching one of the following
inputs: TV channels, Video, Component,
HDMI or PC.
To Exit from P&P and PIP
1
Press OPTIONS to display the OPTIONS
menu.
2
Press V/v to highlight P&P or PIP, and press
to display the sub window.
2
Press V/v to highlight Exit P&P or Exit PIP
(depends on the mode you are in), and press
to exit.
P&P Availability
In main window
Video 1/2/3
Component 1/2
HDMI IN 1/2/3/4 (except PC
timing)
In sub window
~
TV Channel
(VHF/UHF/
CABLE IN)
Video 1/2/3
Component 1/2
• You may also press RETURN while in these features
to exit.
• Additional compatible device with television tuner is
required to watch two simultaneous live television
program.
PIP Availability
In main window
In sub window
PC
TV Channel
(VHF/UHF/
CABLE IN)
HDMI IN 1/2/3/4 (PC timing)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
The HOME button allows you to access the TV Home Menu on the XMB™
(XrossMediaBar) as well as a variety of TV features.
Product Support
The XMB displays the Media
Category icons (horizontally)
™
Clock/Timers
and available features
(vertically) within the
highlighted icon.
Settings
Sound
Screen
The XMB is shown here with
™
Settings highlighted.
Video Options
TV
Media Category Icons
Adjusting TV Settings
Customize the TV settings with various options.
Settings
• The available options vary depending on the situations and conditions applied. Unavailable options
are grayed out or not displayed.
Watching TV
Select a channel.
TV
• You can also select a TV channel using the number 0-9 or CH +/– buttons (see remote control
Accessing the Equipment Connected to Your TV
Watch a movie, play a game, record a program or work on your PC.
External
Inputs
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating through TV Home Menu on XMB
™
1
2
Press HOME to display the XMB™.
Press B/b to select a Media Category icon.
Settings
Available TV Available
Select inputs from
settings and channels are Video1, 2, 3
features are listed under
listed under the TV icon. HDMI 1, 2, 3, 4
the Settings
Component 1, 2
PC
under the External Inputs icon.
icon.
3
Press V/v to move within the Category Object Bar.
(The Category Object Bar shown below is for the Settings.)
Product Support (page 37)
Picture (page 37)
Screen (page 40)
Video Options (page 42)
Audio Options (page 43)
Channel (page 44)
CC
Closed Captions (CC) (page 45)
Parental Lock (page 45)
HDMI Settings (page 48)
General (page 48)
Initial Setup (page 48)
4
5
6
Press
Press
when desired item is highlighted.
or, V/v to select the highlighted item.
Press RETURN or HOME to exit.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setting Description
Product Support
Contact Sony
Sony contact information is available from this screen for your convenience. Your TV’s
specific information such as Model Name, Serial Number, Software Version and
downloadable ratings version, if available from the TV, is displayed here.
Signal Diagnostics
Press
to display the diagnostics information for the current signal.
Clock/Timers Settings
Current Time
Sets the current time (day, hour, minutes, and AM/PM). The Timer feature will not be
available until you set Current Time.
1
2
3
4
Use the V/v/B/b button to highlight the Clock/Timers icon and press
.
Use the V/v/B/b button to set the current time and press
.
Press RETURN to display the confirmation screen.
Select Yes or No to save changes you made. Selecting Yes will save your settings
and exit the Current Time setting screen.
Timer
Timer can be set, so the TV tunes to a certain channel as well as a specified volume at the
specified time you set. After this is executed the TV will turn off at the specified time you
set.
1
2
3
Use the V/v/B/b button to highlight the Timer icon and press
Press to select On to set the timer.
.
Use the V/v/B/b button to set the following: Day of the Week, Time, Duration,
Channel, and TV On Volume.
4
5
Press RETURN to display the confirmation screen.
Select Yes or No to save changes you made. Selecting Yes will save your settings
and will light up the TIMER LED. Exit the Timer setting screen.
Sleep Timer
Sets the time in minutes (Off, 15min, 30min, 45min, 60min, 90min, or 120min) that
you want the TV to remain on before shutting off automatically. This can also be set using
Picture Settings
Picture Mode
Vivid
For enhanced picture contrast and sharpness.
Standard
Cinema
For standard picture settings. Recommended for home entertainment.
For viewing film-based content. Most suitable for viewing in a
theater-like environment.
Photo
For viewing still image content.
Custom
Allows you to store your preferred settings.
(Continued)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
~
• Picture Mode for all inputs can also be accessed by pressing PICTURE on the remote
control to directly toggle the modes.
• The options for Picture Mode may differ depending on the Video/Photo Optimizer
Reset
Resets the current Picture Mode setting to the default values.
Advanced Iris
By selecting the iris option, you can obtain the best brightness and contrast suited for your
TV viewing.
Auto 1, 2
Automatically detects the brightness of the screen. These options are
best suited for programs such as movies that often change between
bright scenes and low light setting scenes.
Auto 1:Recommended option for viewing programs that have larger
variation in brightness from scene to scene.
Auto 2:Recommended option for viewing programs that have less
variation in brightness from scene to scene.
Max
With this option, the brightness has reached the maximum level.
High
With this option, the screen has a high level of brightness. It is suitable
for TV viewing in a brightly lit room.
Medium
Low
With this option, the brightness is about the standard level.
With this option, the screen is dimmed but contrast is at a maximum. It
is suitable for TV viewing in a room with low lighting.
Min
With this option, the brightness is at the minimum level.
Picture
Brightness
Color
Increases or decreases picture contrast.
Brightens or darkens the picture.
Increases or decreases color intensity.
Increases or decreases the green tones.
Hue
Color Temperature
White adjustment
Cool
Gives the white colors a bluish tint.
Neutral
Warm 1, 2
Gives the white colors a neutral tint.
Gives the white colors a reddish tint.
Sharpness
Sharpens or softens the picture.
Noise Reduction
Reduces the noise level of connected equipment, and the VHF/UHF/CABLE input.
MPEG Noise
Reduction
Reduces the mosaic effect in MPEG-compressed video. Useful for DVDs and Digital TV
channels.
DRC Mode
Produces a high-resolution picture for high-density sources (e.g., Blu-ray Disc Player,
DVD Player, satellite receiver).
Mode 1
Mode 2
Recommended mode.
Only available for 1080i format. Mode 2 is especially effective when
original standard-definition signals have been up-converted to 1080i
format.
Off
Turns off DRC Mode.
~
• DRC Mode is available with all sources except for 1080p.
• DRC Mode is not available when Game/Text Mode is set to On.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
DRC Palette
Allows you to customize the level of detail (Reality) and smoothness (Clarity).
1
Press the arrow buttons to highlight DRC Palette then press
The DRC Palette appears.
.
DRC Palette
Video 1
25
Clarity
1
RETURN Back
2
Press the arrow buttons to adjust the position of the marker (z). As you move the z
higher along the Reality axis, the picture becomes more detailed. As you move the
z to the right along the Clarity axis, the picture becomes smoother.
~
• DRC Palette is available with all sources except for 1080p.
• DRC Palette is not available when Game/Text Mode is set to On, or when using the
Freeze feature.
Advanced Settings
Reset
Resets all the advanced settings to the default values.
Black Corrector Enhances black areas of the picture for stronger contrast.
Gamma
Adjusts the balance between the light and dark areas of the picture.
Emphasizes white and light colors.
Clear White
Color Space
Live Color
Selects the range of color reproduction from Wide or Standard.
Makes colors more vivid and reproduces clear skin tones.
White Balance Adjusts the color temperature color by color.
Detail Enhancer Enhances the details of the picture.
Edge Enhancer Enhances the outline of the picture.
~
• Picture settings for all inputs can also be accessed by pressing OPTIONS on the remote control, then selecting
Picture from the OPTIONS menu.
• Picture settings for PC Timings (HDMI or PC input) are the same as other input modes (see above for details), but
Noise Reduction, MPEG Noise Reduction, DRC Mode, DRC Palette and Detail Enhancer are not
available.
Sound Settings
Available Sound settings depend on the Speakers setting under Audio Options settings (page 44).
Sound Mode
Dynamic
Standard
Custom
Enhances treble and bass.
Suitable for spoken dialog.
Customizes the sound settings including the Sound Booster setting.
Reset
Treble
Bass
Resets the current Sound Mode setting to the default values.
Increases or decreases higher-pitched sounds.
Increases or decreases lower-pitched sounds.
Emphasizes left or right speaker balance.
Balance
(Continued)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround
S-FORCE
Provides a virtual surround sound experience made possible using just
Front Surround two front speakers.
Off
Select for normal stereo or mono reception.
Voice Zoom
Adjusts the clarity of human voices. For example, if the voice of a news announcer is
indistinct, you can turn up this setting to make the voice clearer. Conversely, if you are
watching a sports program, you can turn down this setting to soften the voice of the
commentator.
Sound Booster
Sound Booster provides a fuller sound with a greater sense of depth and width, by
emphasizing the high and low frequency sounds. Select High or Low for the amount of
boost you desire while in Custom of the Sound Mode. Selecting Off will bypass the
emphasis.
~
• Sound Booster is automatically set to High for Dynamic of Sound Mode and
Low for Standard of Sound Mode.
Steady Sound
On
Off
Stabilizes the volume across all programs and commercials.
Turns off Steady Sound.
Volume Offset
Adjusts the volume level of the current input (TV or video input) relative to other inputs.
~
• Sound settings can also be accessed by pressing OPTIONS on the remote control.
• Sound settings for PC Timings (HDMI or PC input) are the same as all other input modes (see above for details).
Screen Settings
~
• This television's picture is slightly overscanned on the screen to prevent artifacts or lack of picture at screen edge
caused by television signal or other video sources.
Wide Mode
Wide Zoom
Normal
Fills the screen with minimum distortion.
Displays the 4:3 picture in its original aspect ratio when the original
source is 4:3.
Full
Enlarges the picture horizontally to fill the screen when the original
source is 4:3 (Standard-definition source). When the original source is
16:9 (High-definition source), select this mode to display the 16:9
picture in its original size.
Zoom
Enlarges the picture horizontally and vertically to fill the screen while
maintaining the aspect ratio.
~
• Wide Mode can also be accessed by pressing WIDE on the remote control.
Auto Wide
On
Automatically changes Wide Mode setting based upon content. If
frequent screen changes are disturbing to you, select Off.
Off
Turns off Auto Wide. Choose a screen mode from the Wide Mode
option.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
4:3 Default
Wide Zoom
Enlarges the 4:3 picture to fill the 16:9 screen, displaying as much of
the original image as possible.
Select the default screen
mode to use for 4:3
sources
Normal
Full
Displays the 4:3 picture in its original aspect ratio.
Enlarges the 4:3 picture horizontally only, to fill the screen.
Zoom
Enlarges the picture horizontally and vertically to fill the screen while
maintaining the aspect ratio.
Off
Continues using the current Wide Mode setting when the channel or
input is changed.
~
• 4:3 Default is not available when Auto Wide is set to Off.
• If 4:3 Default is set to anything but Off, the Wide Mode setting applies only to the
current channel. When you change channels (or inputs), Wide Mode is automatically
replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode
setting as channels and inputs are changed, set 4:3 Default to Off.
Display Area
+1
Displays the entire picture with a black frame on the edge of the
screen. This setting can be selected for video signals of HDMI input.
Normal
Displays the recommended picture area.
-1/-2
Enlarges the picture to hide the edge of the picture.
Screen Position
Adjust the Vertical positioning by pressing V/v. Press B/b to adjust the Horizontal
positioning.
~
• The Screen Position feature is useful if the TV is connected to game equipment.
• Screen Position is available only when Wide Mode is set to Zoom.
Vertical Size
Adjusts the vertical size of the picture. Press B/b and press
to adjust.
~
• Vertical Size is available only when Wide Mode is set to Wide Zoom or Zoom.
Screen settings for PC Timings (HDMI or PC input) differ from all other input modes and are shown below.
~
• It is normal to have a black frame surrounding the picture with all input formats.
Auto Adjust
Reset
Select Yes to start the auto adjust to display the PC input.
Resets the current screen setting to the default values.
Adjust after Pitch to fine tune overall sharpness.
Adjust uneven sharpness on screen.
Phase
Pitch
~
H Center
V Center
Allows you to move the position of the picture horizontally (left and right).
To Adjust the H Center
Press V/v to highlight H Center and press
.
Press B/b to correct the centering then press
.
Allows you to move the position of the picture vertically (up and down).
To Adjust the V Center
Press V/v to highlight V Center and press
.
Press B/b to correct the centering then press
.
(Continued)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Wide Mode
Normal
Full 1
Displays the picture in its original resolution and aspect ratio.
Select to expand the picture size while maintaining the original aspect
ratio.
Full 2
Zoom
Select to expand picture size without original aspect ratio.
Select to enlarge the picture horizontally and vertically to an equal
aspect ratio that fills the wide screen.
~
• Wide Mode can also be accessed by pressing WIDE on the remote control.
Video Options Settings
Motion Enhancer
Activates Motionflow to enhance the smoothness of picture movement and to reduce blur.
High
Provides smoother picture movement.
Standard
Off
Provides smooth picture movement. Use this setting for standard use.
Use this setting when the High and Standard settings result in noise.
~
• Depending on the video, you may not see the effect visually, even if you have changed
the setting.
• Motion Enhancer is not available when Game/Text Mode is set to On.
Motion Naturalizer
The picture movement will become more fluid and natural by setting the appropriate
mode.
Recommended Settings
Contents
Motion Enhancer
Motion Naturalizer
Broadcast programs
(For normal use)
Standard
Off
,
,
,
(default)
(default)
Sports, etc.
(Fast moving picture)
Standard
(default)
Mode 2
Mode 1
Standard
(default)
Movie contents
Mode 1
Mode 2
Off
Suitable for movie content. If the picture flickers, switch to Off.
Suitable for content with fast action scenes, such as sports, etc.
Turns off Motion Naturalizer.
CineMotion
Automatically detects film-based content and applies a reverse 3-2 pulldown process.
Moving pictures will appear cleaner and more natural looking.
Auto 1
Auto 2
For standard use and to provide smoother picture movement.
Picture movement will be similar to the original film.
~
• Motion Enhancer setting does not affect film-based content in Auto 2 mode.
Off
Turns off the CineMotion.
~
• The CineMotion feature can be set separately for each input (except PC IN).
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Game/Text Mode
When the signal is 480p, 720p, or 1080p, it provides the optimum screen for viewing
images with fine lines and characters that are input from video game equipment and PCs.
Set to On for the sharp display of fine lines or characters.
Video/Photo
Optimizer
Provides suitable image quality by selecting the option depending on the input source
(video or photograph data).
Video-A
Sets suitable image quality, depending on the input source, video data
or photograph data when directly connecting Sony HDMI output-
capable equipment that supports Video-A mode.
Video
Photo
Produces suitable image quality for moving pictures.
Produces suitable image quality for still images.
~
• The setting is fixed to Video when the HDMI input signal is 1080/24p, or when Video-
A mode is not supported on the connected equipment, even if Video-A is selected.
Video Color Space
(x.v.Color)
Displays a moving picture that is more faithful to the original source by matching the
color space of source.
~
• Setting is fixed to Normal when the input signal is HDMI (RGB), even if x.v.Color is
selected.
Photo Color Space
Color Matrix
Selects the option to match the output color space within the output signal from the
equipment connected to the HDMI or component input jacks. Select sYCC when using
the equipment that supports x.v.Color.
~
• Setting is fixed to sRGB when the input signal is HDMI (RGB), even if sYCC is
selected.
Allows you to reproduce the color-difference signals. It is recommended that you leave
this at the factory default setting.
Auto
Automatically optimize based on signal.
Custom
If the tone of the picture from the input source is unnatural, select
either ITU601 or ITU709, which normalizes the tone.
~
• When inputting VIDEO 1 to 3, ITU601 or ITU709 can be selected instead of Auto or
Custom.
RGB Dynamic Range Produces natural color by changing the luminance tone reproduction of HDMI input color
signals (RGB). Set to Auto for standard use. Change the settings only when the
luminance tone of the display is unnatural.
Audio Options Settings
MTS
Stereo
For stereo reception when viewing a TV program broadcast in stereo.
Enjoy stereo, bilingual
and mono programs
Auto SAP
Automatically switches the TV to second audio programs when a SAP
signal is received. If no SAP signal is present, the TV remains in
Stereo mode.
Mono
For mono reception. Use to reduce noise during weak stereo
broadcasts.
~
• MTS is available only for analog programs.
(Continued)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Speakers
TV Speakers
Select to use the TV speakers for audio.
Audio System Select this option if you wish to use an external audio system for the
TV sound. By selecting this option you are disabling the TV speakers.
Audio Out
Easy control of volume
adjustment
Fixed
Select to fix the audio output and allow you to adjust the volume with
your audio system’s remote control. (The TV’s remote control’s VOL
and MUTING buttons have no effect on Audio Out.)
Variable
Select to control the Audio Out’s volume and muting with your TV’s
remote control.
Woofer Level
Increases or decreases the low frequency sounds.
~
• Alternate Audio is available only for digital programs. If the program you are watching is also available in other
languages from the audio tracks, and if that language is what you have selected in the Language setting, your TV
will automatically switch to the matching language with the Alternate Audio feature. The Alternate Audio
option may be accessed by pressing OPTIONS on the remote control when alternate audio stream is available from
the broadcaster.
Channel Settings
Cable
On
Off
For receiving cable channels via cable TV provider.
For using an antenna.
~
• You should run Auto Program after changing the Cable setting.
Auto Program
Automatically sets up the channel list on the TV for all receivable channels. Channel
scanning will be based on On/Off of Cable setting.
1
2
Select Auto Program.
Select OK to start Auto Program. When Auto Program is completed, the screen
will display the number of channels found.
3
Press RETURN to exit Auto Program.
~
• Running Auto Program will clear Favorites list.
• If you run Auto Program again, previously scanned channels will be overwritten with
the newly scanned channels.
Add Digital Channels Select to add digital channels. Be sure to have the Cable option selected appropriately for
the signal source. (Useful for antenna installation)
Show/Hide Channels Allows you to show or hide channels when you surf with the CH +/– button or in the TV
channel list on the XMB .
™
1
Press V/v to scroll through the channels until you highlight the channel to show or
hide.
2
Press
to select Shown or Hidden.
To show or hide more channels, repeat steps 1-2.
~
• Hidden channels can be accessed by entering the channel number with 0-9 buttons on
the remote control.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Channel Labels Assigns labels (such as station call letters) to channel numbers.
1
Press V/v to scroll through the channel numbers. Then press
number to assign a label.
to select the channel
2
Press V/v to scroll through the label characters (A-Z, 0-9, etc.). Press b to move to
the next character. Repeat to add up to 7 characters to the label. Press
to set it.
To assign labels to more channels, repeat steps 1-2.
Closed Captions (CC) Settings
CC
CC Display
Analog CC
Allows you to turn On or Off the Closed Captions (CC) feature.
For the basic analog (EIA-608) closed caption options.
CC1, CC2,
CC3, CC4
Displays a printed version of the dialogue or sound effects of a
program. (Should be set to CC1 for most programs.)
Text1, Text2,
Text3, Text4
Displays network/station information presented using either half or
the whole screen (if available).
Digital CC
For both analog (EIA-608) and digital (EIA-708) closed caption options.
Select from Service 1-6 and CC1-4 (advanced digital closed caption options).
Display Options
Customizes the Closed Captions (CC) displays with Text, Character Size,
Character Style, Character Color, Character Opacity, Edge Type, Edge Color,
Background Color and Background Opacity.
~
• Closed Captions (CC) can be turned on and off directly by pressing CC on the remote control.
Parental Lock Settings
The Parental Lock feature allows you to block programs according to their content and rating levels. It
also allows you to block channels regardless of the program’s rating. A password is necessary in setting up
the Parental Lock feature.
To View Blocked Programs
Press ENT when tuned to a blocked program, then enter the password. To reactivate the Parental Lock settings, turn
off and on the TV.
Password
Use 0-9 buttons on the remote control to enter a four-digit password. The first time the
password is created, you must re-enter it again to confirm the password. “Password Set”
message will appear on the screen upon confirmation.
Change Password
You can change your password by entering the Parental Lock setting with the
previously set password, highlight and select Change Password then enter the new
password.
~
• You need your password for any future access into the Parental Lock settings. If you
Country
Select the country name of U.S.A. or Canada for the appropriate ratings. The rating
(Continued)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Rating
Off
Turns off Parental Lock. No programs are blocked from viewing
based on their ratings.
Child
Maximum ratings permitted are:
U.S.: TV-Y, TV-G, G
Canada: C, G, TV-Y
Youth
Maximum ratings permitted are:
U.S.: TV-PG, PG
Canada: C8+, PG, 8 ans+, TV-PG
Young Adult
Custom
Maximum ratings permitted are:
U.S.: TV-14, PG-13
Canada: 14+, 13 ans+, TV-14
Sets ratings manually.
~
• If you are not familiar with the parental guideline rating system, you should select Child, Youth, or Young Adult
to help simplify the rating selection. To set more specific ratings, select Custom.
Digital Rating
(Available only in U.S.A.
where advanced ratings
exist)
Off
Turns off Digital Rating. No programs containing digital ratings are
blocked from viewing.
Clear All
Custom
Allow
Clears the downloaded ratings.
Customizes Parental Lock with downloadable digital ratings.
Allows programs and movies that are broadcast without a rating.
Blocks all programs and movies that are broadcast without a rating.
Unrated
(Available only when
Country is set to U.S.A.)
Block
~
• If you block unrated TV programs, be aware that the following types of programs may
be blocked: programs broadcast from another country, emergency broadcasts, political
programs, sports, news, public service announcements, religious programs and weather.
Channel Block
Allows you to block channels regardless of program ratings. The password needs to be set
up prior to blocking channels. The blocked channel can only be viewed by entering the
correct password.
To View a Blocked Channel
Press ENT when tuned to the blocked channel then enter the password.
Custom Rating System Chart
For Country selection of U.S.A.:
Movie Rating
G
All children and general audience
PG
Parental guidance suggested
PG-13
R
Parental guidance for children under 13
Restricted viewing, parental guidance is suggested for ages under 17
No one 17 or under allowed
NC-17 and X
46
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Rating
Block programs by their
rating, content or both
Age-Based Ratings
TV-Y
All children
TV-Y7
Directed to children age 7 and older
General audience
TV-G
TV-PG
Parental guidance suggested
Parents strongly cautioned
Mature audience only
TV-14
TV-MA
Content-Based Ratings
FV
D
L
Fantasy violence
Suggestive dialogue
Strong language
Sexual situations
Violence
S
V
~
• To ensure maximum blocking capability, set the Age-Based Ratings.
For Country selection of Canada:
English Rating
C
All children
C8+
Children 8 years and older
General programming
G
PG
Parental guidance
14+
Viewers 14 and older
18+
Adult programming
French Rating
U.S.A. Rating
G
General programming
8 ans+
13 ans+
16 ans+
18 ans+
Not recommended for young children
Not recommended for ages under 13
Not recommended for ages under 16
Programming restricted to adults
See TV Rating under U.S.A. for details.
External Inputs Settings
Label Inputs
You can label your inputs with the name of equipment you have connected.
To assign your own label or Skip the input:
1
Press V/v to highlight the video input (Video 1, 2, 3; Component 1, 2; HDMI 1,
2, 3, 4; PC), then press to select the desired input.
Press V/v to highlight the display label you want to assign, then press
2
.
~
• You can select from the following labels for each input.
Video 1, 2, 3; Component 1, 2; HDMI 1, 2, 3, 4: –, DVD, Cable Box, Satellite,
BD, VCR, Receiver, DVR, Game, Camcorder, PC, Skip.
PC: –, Skip.
• “–” indicates that no labels are assigned.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI Settings
HDMI inputs of this TV will recognize and communicate with other Sony equipment equipped with
HDMI Control.
HDMI Control
On/Off feature allows your TV to communicate with other equipment that supports
HDMI Control.
Device Auto Power Off Select On to have your connected HDMI Control equipment power off automatically
when the TV is turned off. Select Off to disable this function.
TV Auto Power On
Device List
Select On to control your TV’s power on from your connected HDMI Control equipment.
Select Off to disable this function.
Displays a list of HDMI Control equipment connected to the TV.
General Settings
Language
Select the language of your choice from English, Español and Français to be used for
displaying all the on-screen settings.
Info Banner
Displays the program name and the program information such as program title and
program rating (if available from the broadcaster) when option is set to On. Select Off for
minimal display information. Selecting Off will not completely disable the banner
display. Info Banner also appears on the screen each time the channel is changed or
DISPLAY on the remote control is pressed.
~
• To see the rating information on the banner, Info Banner setting must be set to On.
Power Saving
Reduces the power consumption by adjusting the lamp brightness. This also enhances the
black level.
Logo Illumination
Display Position
Select to illuminate the Sony logo on the front panel of the TV. Select On or Off.
When selected, the guide markers for the TV Display Position will appear at four
corners of the screen. Adjust Vertical position and/or Horizontal position by pressing
V/v/B/b buttons to evenly position the markers.
Cooling Mode
Select High to use the TV at an altitude of 5,000 feet (1,500 m) or higher.
Lamp Replacement
When the lamp nears the end of its life, a message will appear every time the TV is turned
on. After the lamp is replaced, select this option then follow the steps on screen.
Initial Setup
If you have missed the Initial Setup when you first connected the TV or if you want to scan all receivable
channels, you can run the Initial Setup. Follow the instructions on the screen. Settings such as picture and
sound adjustments will not be affected by this Initial Setup.
~
• Favorites list will be cleared each time you run the Initial Setup.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Replacing the Lamp
How to Replace the Lamp
The projection lamp, like all lamps, will eventually
lose brightness and functionality, which affects the
overall performance of your TV. How long the
lamp maintains its brightness will vary depending
upon your usage and environmental conditions. To
maintain the quality of your viewing experience,
Sony recommends that you replace the lamp (1)
after approximately 8,000 hours of use; (2) when
the screen becomes dark or the color looks
1
Turn off the power on the main unit. Wait
several minutes, then unplug the power cord.
(The cooling fan will continue to operate for
about two minutes after turning the power
off.)
2
Wait at least 30 minutes after unplugging the
power cord to allow the lamp to cool down
before replacing it. To avoid being burned, do
not touch the lamp receptacle once the lamp
has been removed.
unusual; (3) when the LAMP LED on the front of
the TV blinks; or (4) when the lamp replacement
message appears on the TV screen.
3
Take the new lamp out of the box.
Do not touch the glass portion of the new
lamp.
WARNING
Electric appliances can cause fire or high
temperature, resulting in injury or death. Be
sure to follow the instructions below.
~
• Do not shake the lamp. Vibration can damage the lamp
or shorten its life.
• Avoid touching the front glass of a new lamp or the
glass of the lamp receptacle. This may reduce picture
quality or lamp life.
s
s
s
Use a Sony XL-5200 replacement lamp (not
supplied) for replacement. Use of any other
lamp may damage the TV.
4
Remove the outside lamp cover on the right
side rear of the TV.
Do not remove the lamp for any purpose other
than replacement. Doing so may cause injury
or fire.
Turn the screw counterclockwise and release
the two clamps as shown in the illustration
below.
Do not put flammable materials and metal
objects inside the lamp receptacle of the TV
after removing the lamp. Doing so may cause
fire or electrical shock. Do not touch the lamp
receptacle once the lamp has been removed.
s
s
When the lamp eventually burns out, you may
hear a noticeable pop sound. This is normal
and it is inherent to this type of lamp.
In rare instances, the bulb may pop inside the
lamp unit, but the lamp unit is designed to
contain all of the broken glass pieces inside
the lamp unit.
s
This TV’s lamp contains mercury and should
be disposed of properly. Consult your local
authorities regarding safe disposal. The
material contained in this lamp is similar to
those of a fluorescent lamp, so you should
dispose of it in the same way.
(Continued)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Remove the lamp door.
Push the lever up and pull out the door.
8
Reattach the lamp door.
Insert the two tabs on the top of the lamp door
into the slots of the cabinet.
6
Pull the lamp out of the TV.
Hold the indented grooves as shown in the
illustration, and pull the lamp straight out.
Hold this
part of the
lamp
~
• Make sure the lever is raised to the corner of the
triangle that points left as shown in the illustration.
• If the lamp is not securely reattached, the self-
diagnostic function may be triggered and the POWER
~
9
Put the outside lamp cover back in its place.
Replace the cover, inserting it from the left
side. Press the two clamps on the right side to
secure the cover and turn the screw clockwise.
• The lamp is very hot immediately after use. Do not
touch the inside of the lamp compartment, the glass
portion of the lamp, or the surrounding parts.
• After the used lamp has cooled, place it into the empty
box of the replacement lamp. Never put the used lamp
into a plastic bag.
7
Slide the new lamp into its place.
Insert the new lamp by pressing the two parts
firmly into place as shown in the illustration.
Make sure the lamp is securely mounted into
the compartment. Failure to do so may cause a
fire or the screen to go dark.
10 Plug in the power cord. Turn on the TV and
set the Lamp Replacement option in the
necessary to inform you when the next lamp
replacement is needed.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
~
• Until you set the Lamp Replacement option, a
message announcing that the lamp is at the end of its
life will appear every time you turn on the TV.
• Consult your Sony dealer for a Sony XL-5200
replacement lamp.
• Take great care when replacing the lamp or plugging
in/unplugging the connecting cords. Rough handling
may cause the TV to fall, damaging the TV, the TV
stand and the floor.
The used lamp
For customers in the United States:
Lamp in this product contains mercury. Disposal
of these materials may be regulated due to
environmental considerations. For disposal or
recycling information, please contact your local
authorities or the Electronic Industries Alliance
(http://www.eiae.org).
s
Do not leave the used lamp near flammable
materials or within the reach of children.
s
Do not pour water onto the used lamp or put
any object inside the lamp. Doing so may
cause the lamp to burst.
For replacement lamp information visit:
U. S. residents:
Canadian residents:
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have questions, service needs, or require
technical assistance related to the use of your
Sony TV, please visit our website or call one of
the following numbers:
1-800-222-SONY(7669) for US Support
1-877-899-SONY(7669) for Canadian Support
Condition
Explanation/Solution
No picture
Cannot receive any channels
• Make sure the power cord is connected securely.
• Turn on the power of the TV.
• Check antenna/cable connections.
• Make sure the Cable setting is correct for your TV signal source.
• The banner display will disappear when there is no RF input for a certain period
of time. Press DISPLAY on the remote control to redisplay the banner.
TV is locked to one channel
• Perform Auto Program to add receivable channels that are not present in the
Cannot receive or select
channels
• Perform Auto Program to add receivable channels that are not present in the
• To receive or select cable channels, make sure that Cable in the Channel
antenna, make sure Cable is set to Off.
The TV turns off
automatically
• Check if Sleep Timer is activated, or confirm the Duration setting of Timer
No picture from some video
sources
• Check the connection between the optional video equipment and the TV.
• Press HOME on the remote control. Select your desired input from the
External Inputs list.
• The banner display will disappear when there is no video input for a certain
period of time. Press DISPLAY on the remote control to redisplay the banner.
Poor picture
The quality of the images is
not as good as what I saw at
the store
• Picture quality depends on the signal content. See Quick Setup Guide
(supplied) to display the best possible picture for that signal.
Double images or ghosts
• Check antenna/cable connections.
• Check the antenna location and direction.
Only snow and noise appear
on the screen
• Check if the antenna is broken or bent.
• Check if the antenna has reached the end of its serviceable life. (3-5 years in
normal use, 1-2 years at the seaside.)
Dotted lines or stripes
• Keep the TV away from noise sources such as cars, motorcycles, or hair-dryers.
• If using 300-ohm twin lead, move the excess lead away from the TV or try
using a 75-ohm coaxial cable instead.
not correct/The picture is too • Adjust the Picture Mode options in the Picture settings (see page 37).
bright
• The picture becomes dark if Motion Naturalizer is set to Mode 1. Change
Noisy picture
The picture flickers
• Make sure that the antenna is connected using a 75-ohm coaxial cable.
• Keep the antenna cable away from other connecting cords.
• To avoid TV interference, make sure to use an undamaged antenna cable.
• When Motion Naturalizer is set to Mode 1 or Mode 2 for 1080/24p format,
the picture flickers. This is a characteristic of Motion Naturalizer and not a
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Explanation/Solution
No sound/Noisy sound
Good picture, no sound
• Check the volume control.
• Press MUTING or VOL + so that “Muting” disappears from the screen
• Disconnect your headphones.
If it is set to Audio System, sound is not output from the TV’s speakers
regardless of the TV’s volume control.
• When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL
AUDIO OUT (Optical) may not provide an audio signal.
Audio noise
• Make sure that the antenna is connected using a 75-ohm coaxial cable.
• Keep the antenna cable away from other connecting cords.
• To avoid TV interference, make sure to use an undamaged antenna cable.
PC Input
No Picture / No Signal
• Confirm the PC is correctly connected to the TV with either the PC IN (with an
HD15-HD15 cable with ferrite core) or with the HDMI IN.
• Turn the PC off. Confirm the PC connection and restart the PC. Plug and play
will auto-detect the TV and correctly set up PC timing.
Poor Picture
• Adjust Pitch and Phase.
General
Wide Mode changes
automatically
• The current Wide Mode setting is automatically replaced with the 4:3
Default setting when you change the channel or video input, if 4:3 Default in
the Screen settings is set to other than Off. If you want to lock in Wide Mode
selected with the WIDE button on the remote control, set 4:3 Default to Off in
Picture Mode setting turns
to Vivid automatically
• The Store Display Mode might be set to On. This will be deactivated if you
“Store Display Mode :On” • The Store Display Mode is set to On. This will be deactivated if you run the
appears
Suddenly the picture gets
smaller
• The picture gets smaller during the commercials, this is due to the method the
provider broadcasts their contents. When HD content channels switch to SD
definition content (commercials), the picture may be small with a black border.
“Black box” on screen
this feature, set CC Display to Off. If you were trying to select closed
captioning, select CC1 instead of Text1-4.
Black bands appear at the
edges of the screen
• Some wide screen programs are filmed in aspect ratios that are greater than 16:9
(this is especially common with theatrical releases). Your TV will show these
programs with black bands at the top and bottom of the screen. For more
details, check the documentation that came with your DVD (or contact your
program provider).
• Programs in 4:3 aspect ratio will have bands on left and right sides of the
screen.
Certain programs on DVD or • This is due to the digital compression of the source content used by certain
other digital sources display a digital broadcasts and DVDs which may cause your TV’s screen to display less
loss of detail, especially during detail than usual, or cause artifacts (small blocks or dots, pixelations) to appear
fast-motion or dark scenes
on your screen. These signal compressions are more visible and are dependent
on the clarity and resolution of the television.
there is delay between the
remote control and the actual
video
(Continued)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Explanation/Solution
Remote control does not
operate
• Check the polarity of the batteries or replace the batteries.
• Point the remote control at the remote control sensor located at the center of the
TV screen.
• Fluorescent lamps can interfere with your remote control operation; try turning
off the fluorescent lamps.
• Keep the remote control sensor area clear from obstacles.
Cannot change channels with • If you are using the TV to change channels, first press TV (FUNCTION) once,
the remote control
and the TV indicator lights up.
• If you are using another device to change channels, be sure you have not
inadvertently switched your TV from the channel 3 or 4 setting.
• If you are using another device to change channels, be sure to press
FUNCTION for that device. For example, if you are using your cable box to
change channels, be sure to press STB (FUNCTION) once, and the STB
indicator lights up.
Remote control does not
operate non-Sony video
equipment
• If you replaced the batteries to the remote control recently, the code numbers
for the video equipment may need to be reset.
• There may be more than one code for the equipment that you are attempting to
operate.
• There is a possibility that some non-Sony equipment cannot be operated by
your Sony TV remote control. You may need to use the equipment’s original
remote control.
Some digital cable channels
are not being displayed
• Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
• The digital cable channel may be set to Hidden in the Show/Hide Channels
Lost password
• Select the Password settings on the Parental Lock settings, then enter the
following master password: 4357. The master password clears your previous
How to reset the TV to factory • Turn on the TV. While holding down V on the remote control, press POWER
settings
on the TV. (The TV will turn itself off, then back on again.) Release V.
WARNING: The Reset will clear all of your customized settings including the
Parental Lock setting.
LAMP LED blinks in red
“LampReplacement message” • It is time for you to replace the projection lamp used in you TV.
appears
replacing the lamp.
• Use only the lamp designated for your TV model.
• After the lamp is replaced, select the Lamp Replacement option in the
General settings.
The replacement lamp does
not light up
• The lamp door or lamp might not be securely attached. Repeat the steps on page
49 to ensure that they are both installed securely.
The cooling fan is loud
• If the TV is used at high altitudes and the Cooling Mode is set to High, the
cooling fan runs faster and its sound becomes louder. If the TV is not used at
“High Temperature Warning!” • Make sure to remove dust from the ventilation slots on the rear and both sides of
message appears / POWER the TV. In addition, make sure that there are no obstacles in front of the
LED blinks seven times in red ventilation slots. If the message still appears after the dust or obstacles are
removed, the TV may need servicing. Call your local Sony Service Center.
Image left on the screen
(image retention)
• Turn off the TV for a while or let the TV run on another channel. Unlike plasma
TV and CRT TV, image retention on this TV is not permanent. It is only a
temporary condition (see page 12).
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Condition
Explanation/Solution
Green tint or uneven color
• After turning on the TV, you may notice a green tint or slight variation in color
and brightness in certain areas of the picture. This will last only a few minutes
(possibly longer, in cooler rooms or conditions) while circuits within the TV
continually fine tune the color during the warm-up period. This is a normal
temperature characteristic of the components and not a malfunction.
uniformity appears on the
screen when the TV is
powered on
White spot on the screen
when powered off
• If screen is exposed to direct sunlight or strong ambient light, part of the screen
may appear white even when TV is power off. This is due to the strong light
reflecting off the TV screen and reflections coming from behind the screen.
This is a structural property of the projection TV and is not a defect.
• Position your TV away from such light sources.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model
KDS-Z60XBR5
KDS-Z70XBR5
System
3 SXRD panel, 1 lens projection system
Projection system
SXRD panel
Projection lens
Lamp
High Frame Rate Compatible 0.61 Inch Panel Full HD SXRD Device
High performance, large diameter hybrid lens
Ultra High Pressure Lamp, 120W, XL-5200
NTSC: American TV standard
ATSC (8VSB terrestrial): ATSC compliant 8VSB
Television system
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Analog terrestrial: 2-69 / Digital terrestrial: 2-69
Analog Cable: 1-125 / Digital Cable: 1-135
Channel coverage
10 W + 10 W (Front), 15 W (Woofer)
Speaker output
Input/Output jacks
Antenna
75-ohm external terminal for VHF/UHF
S VIDEO (4-pin mini DIN)(VIDEO 1 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative /
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO IN 1/2/3
VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO: 500 mVrms (100% modulation)/ Impedance: 47 kilohms
YPBPR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / PB: 0.7 Vp-p, 75 ohms /
PR: 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p
AUDIO: 500 mVrms (100% modulation)/ Impedance: 47 kilohms
COMPONENT IN 1/2
HDMI IN 1/2/3/4
HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p / Audio: Two channel linear PCM 32, 44.1 and 48 kHz,
16, 20 and 24bits, Dolby Digital
AUDIO (HDMI IN 1 only): 500 mVrms (100% modulation)/ Impedance: 47 kilohms
500 mVrms (100% modulation) (Fixed) / 1 Vrms at the maximum volume setting (Variable)
AUDIO OUT
PC IN
D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
See the PC Input Signal Reference Chart on page 19.
Stereo mini jack, 500 mVrms (100% modulation)/ Impedance: 47 kilohms
Optical Digital Audio Output (PCM/Dolby Digital)
PC AUDIO INPUT
DIGITAL AUDIO OUT
(OPTICAL)
RS232C, D-sub 9-pin
120 V AC, 60 Hz
REMOTE
Power and others
Power requirement
Power consumption
in use
245 W
All models less than 0.1 W
in standby
60
70
Screen size (inches
measured diagonally)
Full Range: 40 × 100 mm (1 5
/8 × 4 inches) (4)
Speaker
Tweeter: 40 mm (1 5
/8 inches) (2)
Woofer: 150 mm (5 7
1505 × 969 × 332 mm
59 3 8 × 38 1/4 × 13 1
/
8 inches) (1)
1737 × 1094 × 371 mm
Dimensions (W/H/D)
Mass
/
/
8 inches
68 1/2 × 43 1/8 × 14 5/8 inches
97 kg
213 lb. 13 oz.
118 kg
259 lb. 18 oz.
Remote control RM-YD017 (1) / Size AA batteries (2) / Cable holders (2) + screws (2) / Support belt (1) / Securing
screw (1) / Wood screw (1) / Operating Instructions (1) / Quick Setup Guide (1) / Warranty Card (1) / Online
Registration Card (U.S.A. and Canada only) (1)
Supplied accessories
TV-Stand: SU-RS52U / Lamp: XL-5200
Optional accessories
~
• Optional accessories availability depends on its stock.
• Design and specifications are subject to change without notice.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
0-9 buttons 24
4:3 Default 41
French Rating 47
FUNCTION buttons 23
S
S VIDEO jack 15
Screen Position 41
Setting up channels 22
Settings
A
G
Add Digital Channels 44
Advanced Iris 38
Advanced Settings 39
Analog CC 45
Game/Text Mode 43
Audio Options 43
H
Channel 44
H Center 41
HDMI IN jack 15
HOME button 27
Hue 38
Clock/Timers 37
Closed Captions (CC) 45
External Inputs 47
General 48
Audio Out 44
AUDIO OUT jack 15
Auto Adjust 41
Auto Wide 40
HDMI Settings 48
Initial Setup 48
Parental Lock 45
Picture 37
I
Info Banner 48
Infrared Receiver (IR) 28
INPUT button 27
B
Product Support 37
Screen 40
Balance 39
Bass 39
Sound 39
BD, DVD or STB operating buttons 25
BD/DVD MENU button 25
BD/DVD TOP MENU button 25
Brightness 38
Video Options 42
J
Sharpness 38
JUMP button 26
Show/Hide Channels 44
Signal Diagnostics 37
SLEEP button 25
Sleep Timer 37
Sound Booster 40
SOUND button 24
Sound Mode 39
Speaker 28
L
Label Inputs 47
LAMP LED 28
Lamp Replacement 48
Language 48
C
Cable 44
CC button 24
CC Display 45
CH +/– button 27
Channel Block 46
CineMotion 42
Color 38
LIGHT button 23
Logo Illumination 48
Speakers 44
Steady Sound 40
Surround 40
M
Color Matrix 43
Color Temperature 38
COMPONENT IN jack (1080p/1080i/
Motion Enhancer 42
Motion Naturalizer 42
Movie Rating 46
MPEG Noise Reduction 38
MTS 43
T
THEATER button 25
Timer 37
720p/480p/480i) 15
Connecting the TV 17
Contact Sony 37
Cooling Mode 48
Country 45
TIMER LED 28
Treble 39
MUTING button 25
TV Auto Power On 48
TV POWER button 25
TV Rating 47
N
Current Time 37
Noise Reduction 38
D
O
Device Auto Power Off 48
OPTIONS button 27
U
Device List 48
U.S.A. Rating 47
Unrated 46
P
DIGITAL AUDIO OUT (OPTICAL)
jack 16
Password 45
PC IN jack 15
Phase 41
Using with remote control
5.1ch DVD AV System 32
AV Receiver 32
Digital CC 45
Digital Rating 46
Display Area 41
DISPLAY button 23
Display Options 45
Display Position 48
Photo Color Space 43
Picture 38
Blu-ray Disc Player 31
Cable Box 31
PICTURE button 27
Picture Mode 37
PIP 34
DVD Player or DVD Changer 31
DVD/VCR Combo Unit 32
DVR 32
x
x
HDD/DVD Combo Unit 32
Satellite Receiver 31
VCR 31
DMe /SERVICE 16
Pitch 41
DRC Mode 38
POWER button 25
POWER LED 28
Power Saving 48
DRC Palette 39
DVR/VCR record buttons 25
E
R
Edit Channel Labels 45
English Rating 47
ENT button 24
Rating 46
Remote control
F
RETURN button 24
F1/F2 button 27
FAVORITES button 24
FREEZE button 24
RGB Dynamic Range 43
(Continued)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|