Sony Flat Panel Television 46NX810 User Manual

4-178-676-42(1)  
Setting up your TV  
LCD  
To watch TV  
Digital Color TV  
Setup Guide (Operating Instructions)  
Additional Information  
Sony Customer Support  
United States  
Canada  
1.800.222.SONY 1.877.899.SONY  
Please Do Not Return  
the Product to the Store  
KDL-60NX810 / 60NX801 / 60NX800 / 55NX811 / 55NX810 / 52NX800 / 46NX810  
KDL-46NX800 / 46NX711 / 46NX710 / 46NX700 / 40NX711 / 40NX710 / 40NX700  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for  
operation (page 18).  
Retain this manual for future reference.  
®
The BRAVIA Full HDTV Experience  
Receive over-the-air HD broadcasts with an  
HD-quality antenna connected directly to the  
back of your TV.  
Visit www.antennaweb.org for more  
information on antenna selection and setup.  
Discover the wealth of entertainment now  
available on super-high resolution Blu-ray  
Thank you for choosing Sony! Your new  
®
BRAVIA TV opens the door to the “Full HDTV  
Experience.” This document will help you get the  
most out of your TV.  
Please take a moment to register your TV at:  
3 DSisocunpldayer and other Sony HD equipment.  
Four Steps to a Full HD Experience  
Set, Source, Sound, and Setup.  
Complete the high-definition experience with a  
BRAVIA Sync™ surround sound system or A/V  
receiver from Sony.  
1 Set  
Now that you have made the best selection in LCD TV  
technology, be sure to remove all accessory contents  
from the packaging before setting up your TV.  
4 Setup  
Install your TV and connect your sources. See  
page 9 for sample connection diagrams.  
2 Source  
TV, you need access to HD programming.  
To help assure the highest quality for your HD  
experience, use Sony HDMI (High-Definition  
Multimedia Interface) cables.  
To experience the stunning detail of your BRAVIA  
To learn more about HDTV, visit:  
U.S.A.: http://www.sony.com/HDTV  
Upgrade your signal or content source to high-  
definition (HD) by contacting your HD service  
provider.  
This TV displays all video input signals in a resolution of 1,920 dots × 1,080 lines.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
*3 KDL-60NX801/60NX800 models are  
shipped with the parts attached to the TV.  
*4 These screws and spacers are required when  
installing an optional Wall-Mount Bracket.  
You must use these screws instead of the ones  
provided with the bracket for safety reasons.  
Be sure to keep them in a safe place until you  
are ready to use the Wall-Mount Bracket. See  
page 23 for the recommended Wall-Mount  
Bracket for your TV.  
Checking the accessories  
For all models  
Table-Top Stand (1)*1  
Remote control (1)*2  
Size AAA batteries (2)  
For KDL-60NX801, KDL-60/52/46NX800  
and KDL-46/40NX700 models  
AC power cord (1)  
Inserting batteries into the  
remote control  
Bottom Cover (1)*3 (KDL-60NX801  
and KDL-60/52/46NX800 only)  
Stand Rear Cover (1)*3  
Fixing screws for Table-Top Stand  
(M5 × 16) (4)*3  
Assembling Screws for Table-Top  
Stand (M5 × 16) (4) (KDL-40NX700 only)  
Black Spacers (4)*4  
(KDL-52/46NX800 only)  
Silver Spacers (4)*4 (KDL-60NX801  
and KDL-60NX800 only)  
Screws (M6 × 20) (4)*4  
1 Remove the protection sheet.  
(KDL-60NX801 and KDL-60NX800 only)  
For KDL-55NX811, KDL-60/55/  
46NX810, KDL-46/40NX711 and  
KDL-46/40NX710 models  
Hexagon wrench (1)  
Assembling screws for Table-Top  
Stand (4)  
(KDL-55NX811, KDL-60/55/46NX810,  
KDL-46NX711 and KDL-46NX710 only)  
Assembling screws for Table-Top  
Stand (2)  
(KDL-40NX711, KDL-40NX710 only)  
3D Glasses (battery included) (2)  
(KDL-55NX811 and KDL-46/40NX711 only)  
Pouch for 3D Glasses (2)  
2 Push and slide the cover upward.  
Guidelines for Remote Control  
• Point your remote control directly at the  
IR sensor located on your TV.  
• Make sure that no objects are blocking the  
path between the remote control and the  
IR sensor on your TV.  
• Fluorescent lamps can interfere with your  
remote control; try turning off the  
fluorescent lamps.  
• If you are having problems with the remote  
control, reinsert or replace your batteries and  
make sure that they are correctly inserted.  
(KDL-55NX811 and KDL-46/40NX711 only)  
3D Sync Transmitter (1)  
(KDL-55NX811 and KDL-46/40NX711 only)  
Double-sided tape (2)  
(KDL-55NX811and KDL-46/40NX711 only)  
*1 KDL-60NX801/60NX800 models are  
shipped with the parts attached to the TV.  
KDL-55NX811, KDL-60/55/46NX810,  
KDL-46/40NX711, KDL-46/40NX710 and  
KDL-40NX700 models requires assembling.  
Refer to other leaflet to assemble the Table-  
Top Stand.  
*2 Please refer to the model name printed on the  
remote control.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Programming the Remote Control  
Your remote control can be programmed to use other equipment and is pre-programmed to  
operate the following Sony equipment.  
Function Button Sony Equipment Code Number  
DVD  
AMP  
STB  
DVD Player  
Receiver  
31033  
52172  
Digital Satellite 01639  
Programming Other Equipment  
Follow the steps below to program your TV remote control.  
2
2
1 Look for the code in the Manufacturer’s Code List (refer to  
i-Manual) that corresponds to the equipment you would like to  
operate with the Sony remote control. If more than one code is  
provided, try programming the first code listed. If your  
equipment’s code is not listed, visit  
list.  
4
3
2 Press and hold a DVD, AMP or STB function button  
simultaneously with INPUT button and release.  
When in the programming mode, the function button (DVD,  
AMP, STB) blinks for approximately 30 seconds until a code is  
entered.  
4
3 Enter the five digit code using  
-
while the function  
buttons (DVD, AMP, STB) are lit. If the code is not entered  
within 30 seconds, you must repeat step 2.  
4 Press  
or ENT to confirm the code. If successfully  
programmed, the function button (DVD, AMP, STB) will blink  
twice, if not, it blinks five times.  
Confirm the Programming  
If you can turn your equipment on and off using the green POWER button, the  
programming is complete. If not, try the next code listed.  
~
• In some cases, you may not be able to program your remote control. If this is the case, use your  
equipment’s own remote control.  
• Any of the function buttons (DVD, AMP, STB) can be programmed to operate other equipment  
regardless of the labeling. For example, if programmed with the correct code, a Blu-ray Disc player  
can be operated with the DVD button. This is useful if your equipment does not match any of the  
labeled buttons.  
To reset the remote control to the factory default:  
Press SCENE, TV POWER, and  
simultaneously. The four function buttons (DVD,  
AMP, STB, and TV) blink when successfully reset.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your TV  
Some TV models are packaged with a  
detached Table-Top Stand so you can mount  
Attaching the Table-Top  
Stand  
Refer to the supplied Table-Top Stand  
instruction leaflet for proper attachment for  
some TV models.  
your TV to a wall right away. If you are not  
mounting the TV to a wall, you will need to  
attach the Table-Top Stand. You will need a  
Phillips screwdriver and the supplied screws  
to complete the task. Look for the attachment  
instructions provided with the TV.  
~
Be sure to consider the following while  
setting up your TV:  
Do not put stress on the LCD panel or the  
frame around the screen.  
Be careful to not pinch your hands or the AC  
power cord when you install the TV unit to the  
Table-Top Stand.  
Disconnect all cables when carrying the  
TV.  
Carry the TV with the adequate number  
of people; larger size TVs require two or  
more people.  
For KDL-52/46NX800 and KDL-46/  
40NX700  
Correct hand placement while carrying  
the TV is very important for safety and  
to avoid damage.  
1 Gently slide the TV unit onto the  
Table-Top Stand and align the screw  
holes.  
Ensure your TV has adequate  
ventilation, see page 16.  
For best picture quality, do not expose the  
screen to direct illumination or sunlight.  
Avoid installing the TV in a room with  
reflective wall and floor materials.  
If the TV is brought directly from a cold  
to a warm location, or is placed in a very  
damp room, or is placed in a room in  
which heating has just been turned on,  
moisture may condense on the surface or  
inside the TV. Should this occur, turn off  
the TV and leave the TV off until the  
moisture evaporates, and then the TV  
can be used. If you notice moisture  
condensation between the glass panel  
and the LCD, turn on the TV and the  
condensation will evaporate after the TV  
has warmed up.  
2 Use the supplied screws to attach the  
TV unit to the Table-Top Stand.  
~
If you use an electric screwdriver, set the  
tightening torque at approximately 1.5 N·m  
{15 kgf·cm}.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3 After all the screws are tighten cover  
the Table-Top Stand with the  
supplied Stand Rear Cover.  
For KDL-55NX811, KDL-60/55/  
46NX810, KDL-46/40NX711 and  
KDL-46/40NX710  
1 Align with the two dowels of the  
Table-Top Stand, and gently place  
the TV, checking the f mark is  
facing the front.  
2 Attach the TV and Table-Top Stand  
with the supplied screw and hexagon  
wrench.  
~
Set the torque setting to approximately 3 N·m  
{30 kgf·cm}.  
Reattaching the Table-Top Stand to  
the TV  
Attach to the original position using the  
removed screws. See “Detaching the Table-  
Top Stand from the TV” (page 15).  
(Continued)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the viewing angle (except 60-inch models)  
This TV can be adjusted within the angles shown below.  
For KDL-52/46NX800 and KDL-46/40NX700  
0°  
6°  
1
4
2
3
Remove screw as  
shown.  
Install screw into the  
top screw hole of the  
Table-Top Stand.  
Slide in.  
Lift up and tilt.  
~
Reverse the steps when readjusting the angle back to 0 degree.  
For KDL-55NX811, KDL-55/46NX810, KDL-46/40NX711 and KDL-46/  
40NX710  
0°  
6°  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the TV  
The following chart shows the high-definition (HD) and standard-definition (SD) video  
formats supported by your BRAVIA TV inputs.  
*1 720/24p format is supported by KDL-55NX811, KDL-60/55/46NX810, KDL-46/  
40NX711 and KDL-46/40NX710.  
*2 For supported PC formats refer to the i-Manual.  
(Continued)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Shown with a Set Top Box with HDMI  
connection  
Shown with a Set Top Box with  
COMPONENT connection  
Set Top Box  
Set Top Box  
Cable System or VHF/UHF Antenna System  
Cable  
or  
Antenna  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shown with HD BRAVIA® Sync™ Basic Connection  
*Rear of TV  
*A/V Receiver  
AM  
SAT  
IN  
DVD IN  
VIDEO 2/BD IN  
OUT  
L
L
R
R
OPT  
VIDOIN1  
IN  
CODAVXD  
AUDIO IN AUDIO IN AUDIO IN  
OSPATTIN  
FRONT  
R
FRONT  
L
SUR  
R
SUR  
L
CENTER SUBWOOFER  
*Blu-ray Disc  
COMPONENT  
VIDEO OUT  
VIDEO  
OUT  
AUDIO  
OUT  
5.1CH OUTPUT  
FRONT REAR CENTER  
Y
DIGITAL OUT  
VIDEO  
PCM/DTS/DOLBY DIGITAL  
AC IN  
L
L
COAXIAL  
OPTICAL  
P
B/CB  
HDMI  
OUT  
PR  
/
CR  
R
R
WOOFER  
S
VIDEO  
HD Cable Box or  
HD Satellite Receiver  
SAT  
(Dish)  
Cable/  
Antenna  
* Signifies a BRAVIA Sync capable device.  
Shown with HD Basic Connection with Home Theater System  
Side Panel  
Rear of TV  
Blu-ray Disc/DVD  
Cable/SAT (Dish)  
SD Cable Box or  
SD Satellite Receiver  
or  
Cable/  
Antenna  
Home Theater System  
(Continued)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shown with PC Connection with SD VCR/DVD  
Side Panel  
Rear of TV  
or  
Notebook PC  
PC  
Splitter  
VCR  
DVD  
VCR/DVD Combo  
Cable/Antenna  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Secure the Stand for the TV.  
Make sure the TV stand can adequately  
support the weight of the TV. Use two angle  
braces (not supplied) to secure the stand.  
For each angle brace use the appropriate  
hardware to:  
Securing the TV  
Sony strongly recommends  
taking measures to prevent  
the TV from toppling over.  
Unsecured TVs may topple  
and result in property  
damage, serious bodily  
injury or even death.  
Attach one side of the angle brace to the  
wall stud.  
Attach the other side to the TV stand.  
Angle brace  
(not supplied)  
Preventing the TV from  
Toppling  
Stand  
Secure the TV to a wall and/or stand.  
Do not allow children to play or climb on  
furniture and TV sets.  
2 Secure the TV to the Stand.  
Use the optional hardware listed below (not  
supplied):  
Avoid placing or hanging items on the  
TV.  
Never install the TV on:  
slippery, unstable and/or uneven  
surfaces.  
furniture that can easily be used as  
steps, such as a chest of drawers.  
Install the TV where it cannot be pulled,  
pushed, or knocked over.  
A machine screw (screwed into the TV’s  
Table-Top Stand)  
For KDL-60NX801, KDL-60/52/  
46NX800 and KDL-46/40NX700  
Use M4 × 16 screw  
For KDL-55NX811, KDL-60/55/  
46NX810, KDL-46/40NX711 and  
KDL-46/40NX710  
Route all AC power cords and  
connecting cables so that they are not  
accessible to curious children.  
Use M4 × 8 screw  
A screw or similar (attach it to the TV  
stand)  
Rope or chain (strong enough to support  
the weight of the TV). Make sure that  
there is no excess slack in the rope or  
chain.  
Recommended Measures to  
Secure the TV  
Consider the following measures when  
securing your TV to a TV stand (not  
supplied).  
An alternative way to secure the TV is with  
an optional Sony Support Belt Kit.  
Machinescrew  
(not supplied)  
Rope or chain  
(not supplied)  
Screw hole on the  
Table-Top Stand  
Screw (not supplied)  
(Continued)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
~
Contact Sony Customer Support to obtain the  
optional Support Belt Kit by providing your TV  
model name.  
For United States call: 1-800-488-7669 or  
For Canada call: 1-877-899-7669  
Organizing the AC power  
cord  
~
Do not bundle the AC power cord together  
with other cables.  
3 Anchor the TV to the Wall.  
Anchor the TV to the wall by using bolts,  
wall anchor and chain (or rope).  
For KDL-60NX801, KDL-60/52/  
46NX800 and KDL-46/40NX700  
~
KDL-60NX801, KDL-60/52/46NX800 and  
KDL-46/40NX700 are shipped with screws  
attached to the rear of the TV. (They are  
fastened in the screw holes for wall mounting.)  
Be sure to remove the upper two screws prior  
to anchoring the TV on a wall.  
Securing the TV to the stand without securing  
the TV and the stand to the wall provides  
minimum protection against the TV toppling  
over. For further protection, be sure to follow  
the three measures recommended.  
~
After the AC power cord is thread as  
illustrated, place the bottom cover (for NX801/  
800 series only).  
Anchor bolts (not supplied)  
For KDL-55NX811, KDL-60/55/  
46NX810, KDL-46/40NX711 and  
KDL-46/40NX710  
Rope or  
Wall-  
mount  
holes  
chain  
(not  
supplied)  
Wall-anchor  
(not  
supplied)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Detaching the Table-Top  
Stand from the TV  
Remove only the screws marked with  
the TV.  
Running initial setup  
on  
~
Do not remove the Table-Top Stand for any  
reason other than to install corresponding  
accessories on the TV.  
1 Complete your cable connections  
before proceeding with the Initial  
Setup.  
For KDL-60NX801, KDL-60/52/  
46NX800 and KDL-46/40NX700  
~
Connect the TV to your nearest power  
outlet.  
The NX801/NX800/NX700 series models  
must remove the stand rear cover prior to  
detaching the Table-Top Stand.  
When installing the TV on a wall, remove the  
four screws from the rear of the TV. (They are  
fastened in the screw holes for wall mounting.)  
Be sure to store the removed screws in a safe  
place, keeping them away from children  
(except KDL-46/40NX700).  
When attaching the Table-Top Stand again, be  
sure to fasten the four screws (previously  
removed) to the original holes on the rear of  
the TV (except KDL-46/40NX700).  
2 Check the ENERGY SAVING  
3 PSrWesIsT1CH(PsOetWtinEgRi)s oonn t(hze)T. V.  
When you switch the TV on for the  
first time, the Language menu  
appears on the screen.  
~
The TV image shown here may differ from  
your TV but the operation of your TV remains  
the same as indicated.  
4
Follow the instructions on the screen.  
~
The ENERGY SAVING SWITCH must be on  
(z) to set the clock and obtain program  
information for the TV Guide.  
Home mode sets the TV to display the settings  
optimized for home viewing (this setting is  
ENERGY STAR compliant).  
For KDL-55NX811, KDL-60/55/  
46NX810, KDL-46/40NX711 and  
KDL-46/40NX710  
5 Select Continue to scan for available  
channels and enable the TV Guide  
®
KDL-60NX810  
On Screen feature. If you receive  
channels from a cable box or satellite  
receiver and do not wish to use the  
TV’s built-in tuner, select Skip.  
Selecting Skip will disable the TV  
Guide On Screen feature, which is  
only available when the TV’s tuner is  
used.  
~
Joint  
If you skip the channel scan while in the setup  
menus, TV Guide will be disabled.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using a Wall-Mount Bracket Installing the TV Against a  
Your TV can be mounted on a wall using a  
Wall or Enclosed Area  
Wall-Mount Bracket (not supplied) out of  
Make sure that your TV has adequate  
the box as packaged. Some larger size TV  
ventilation. Allow enough space around the  
may require detaching the Table-Top Stand;  
TV as shown below. Avoid operating the TV  
at temperatures below 41 °F (5 °C).  
see “Detaching the Table-Top Stand from  
Prepare the TV for the Wall-Mount Bracket  
before making cable connections.  
Installed with stand  
7
11  
/
inches  
8
For product protection and safety  
reasons, Sony strongly recommends that  
you use the Wall-Mount Bracket  
designed for your TV and the installation  
should be performed by a Sony dealer or  
licensed contractor.  
(30 cm)  
3
2
/
inches  
8
4 inches  
(10 cm)  
4 inches  
(10 cm)  
(6 cm)  
Leave at least this much space around the set.  
Follow the instruction guide provided  
with the Wall-Mount Bracket for your  
model. Sufficient expertise is required in  
installing this TV, especially to  
Installed on the wall  
7
11  
/
8
inches  
(30 cm)  
determine the strength of the wall for  
withstanding the TV’s weight.  
4 inches  
(10 cm)  
4 inches  
(10 cm)  
Be sure to use the screws supplied with  
the Wall-mount bracket when attaching  
the mounting hooks to the TV set.  
The supplied screws are designed so that  
they are 8 mm to 12 mm in length when  
measured from the attaching surface of  
the mounting hook.  
Leave at  
least this  
much space  
around the  
set.  
4 inches (10 cm)  
Never install the TV set as follows:  
Air circulation is blocked.  
The diameter and length of the screws  
differ depending on the Wall-mount  
bracket model. Use of screws other than  
those supplied may result in internal  
damage to the TV set or cause it to fall,  
etc.  
Air circulation is blocked.  
Wall  
Wall  
8-12 mm  
Screw  
(supplied with the  
Wall-mount bracket)  
Mounting Hook  
~
Hook attachment on rear of  
TV set  
Inadequate ventilation can lead to overheating  
of the TV and may cause damage to your TV  
or cause a fire.  
Be sure to store the unused screws and  
Table-Top Stand in a safe place until you  
are ready to attach the Table-Top Stand.  
Keep the screws away from small  
children.  
~
Read the supplied Safety Booklet for  
additional safety information.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To watch TV  
To watch programs  
Turn on the TV.  
1
2
1-2  
1 Check the ENERGY SAVING  
SWITCH setting is on (z).  
2 Press 1 (POWER) on the TV or  
TV ?/1 on the remote control to  
turn on the TV. (You may use the  
TV ?/1 button located on the  
back of the remote control.)  
GUIDE  
OPTIONS  
HOME  
~
The TV image shown here may differ  
from your TV but the operation of your  
TV remains the same as indicated.  
Select a TV channel.  
0-9  
ENT  
2
To use the Guide  
Press GUIDE to display the TV Guide  
On Screen to view scheduled  
programs or to select a program to  
watch. Press again to exit the Guide.  
Use with 0-9 and ENT to select digital  
channels. For example, to enter 2.1,  
press  
,
,
, and ENT.  
To use the TV features  
Press HOME to display TV Home Menu/  
XMBto access TV Settings and other  
media and network related content.  
Press OPTIONS to display a list of  
convenient functions and menu shortcuts.  
The Options menu items vary based on  
current input and/or content.  
Picture Adjustments  
Sound Adjustments  
Add to Favorites  
Speakers  
Settings  
Picture  
&
Display  
Adjust the picture and screen settings  
Press  
or:  
Picture Adjustments  
Ambient Sensor  
Screen  
Pro Picture Setup  
T
(Continued)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To use i-Manual  
Your BRAVIA TV comes with an on-screen  
manual. You can browse your i-Manual  
anytime you need to find the varieties of  
convenient functions.  
Press i-MANUAL.  
1
1
2
Press F/f/G/g/ to navigate  
and select items.  
2
i-Manual  
Welcome to i-Manual  
BRAVIA TV Features  
Watching TV  
Using the Home Menu  
Fun Features with Connected Equipment  
Parts Description  
Troubleshooting  
Index  
RETURN Back  
x Welcome to i-Manual  
x BRAVIA TV Features  
x Watching TV  
x Fun Features with Connected  
Equipment  
Introduces how to connect and enjoy  
optional equipment.  
Introduces convenient features such as TV  
Guide, Favorites, etc.  
x Parts Description  
x Troubleshooting  
x Using the Home Menu  
You can find solutions for your problems.  
You can find how to customize your TV  
settings, etc.  
x Index  
~
Images and illustrations may differ from what you are watching on this TV.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Additional Information  
Troubleshooting  
The TV will indicate any problems with the STANDBY indicator flashing in red.  
When the STANDBY indicator is flashing  
The self-diagnosis function is activated.  
1 Count how many times the STANDBY indicator flashes between each three  
second break.  
For example, the indicator may flash three times, go off for three seconds, then flash  
again three times.  
2 Press 1 (POWER) on the TV to turn it off, disconnect the AC power cord, and  
inform your dealer or Sony service center of how the indicator flashes (number  
of flashes).  
When the STANDBY indicator is not flashing  
1 Check the items in the tables below. (Also refer to “Troubleshooting” in the  
i-Manual.)  
2 If the problem persists, contact Sony Customer Support (information provided  
on the front cover).  
Condition  
Explanation/Solution  
Picture  
There is no picture  
(screen is dark) and no  
sound.  
Check the antenna/cable connection.  
Connect the TV to the AC power, and press 1 (POWER) on  
the TV.  
If the STANDBY indicator lights up in red, press TV ?/1  
on the remote control.  
Tiny black dots and/or The screen is composed of pixels. Tiny black dots and/or  
bright dots (pixels) on the screen do not indicate a  
malfunction.  
bright dots appear on the  
screen.  
General  
The TV’s power cannot Check to see the (z) mark on the ENERGY SAVING  
SWITCH is pressed.  
be turned on.  
The TV turns off  
automatically (the TV  
enters standby mode).  
Check if the Sleep Timer, Timer, or Idle TV Standby is  
activated.  
The Auto Shut-off function may be set to On. If Auto  
Shut-off is activated and TV receives no signal, the TV will  
automatically enter standby mode in 15 minutes. Check  
Auto Shut-off is activated under Eco feature of this TV.  
(Continued)  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Condition  
The remote does not  
Explanation/Solution  
Replace the batteries.  
Your TV may be in SYNC mode. Press SYNC MENU,  
select TV Control and then select Home (Menu) or  
Options to control the TV.  
function.  
The TV and its  
surrounding become  
warm.  
When the TV is used for an extended period of time, the TV  
and its surround may become warm to touch. This is not  
malfunction of the TV.  
The Parental Lock  
password has been  
forgotten.  
Enter 4357 for the PIN code. (PIN code 4357 is always  
accepted.)  
How to Care for Your BRAVIA  
Safety is very important, please read and follow the safety documentation (Safety Booklet)  
separately provided.  
Unplug the TV and other connected equipment from the  
wall outlet before you begin cleaning your TV.  
• Wipe the LCD screen gently with a soft cloth.  
• Stubborn stains may be removed with a cloth slightly  
moistened with a solution of mild soap and warm water.  
• If using a chemically pretreated cloth, please follow the  
instruction provided on the package.  
• Never use strong solvents such as a thinner, alcohol or benzine for cleaning.  
• Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated.  
The TV should also be placed on a stable surface to prevent it from toppling over (see  
page 13). If you have young children or pets at home, check regularly to insure the TV is  
securely fastened.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Model name KDL-  
60NX801/  
60NX800  
52NX800  
46NX800  
46NX700  
40NX700  
System  
Television system  
NTSC: American TV standard  
ATSC (8VSB terrestrial): ATSC compliant 8VSB  
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)  
Channel coverage  
Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69  
Analog Cable: 1 - 135 / Digital Cable: 1 - 135  
Panel system  
LCD (Liquid Crystal Display) Panel  
10 W + 10 W  
Speaker output  
Input/Output jacks  
CABLE/ANTENNA  
VIDEO IN 1/2  
75-ohm external terminal for RF inputs  
VIDEO / AUDIO  
COMPONENT IN  
YPBPR (Component Video) / Signal format: 480i, 480p, 720p, 1080i, 1080p  
AUDIO  
HDMI IN 1/2/3/4  
HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p  
HDMI: Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits,  
Dolby Digital  
AUDIO (HDMI IN 2)  
AUDIO OUT  
500 mVrms (typical)  
DIGITAL AUDIO OUT  
(OPTICAL)  
PCM/Dolby Digital optical signal  
PC IN  
D-sub 15-pin, analog RGB  
Stereo mini jack  
PC/HDMI 2 AUDIO IN  
LAN  
10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network  
environment. 10BASE-T/100BASE-TX communication rate and communication quality are not  
guaranteed for this TV.)*1  
USB/DLNA  
Refer to the i-Manual for supported format.  
Power and others  
Power requirement  
Power consumption  
in use  
110-240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz)  
222 W  
169 W  
153 W  
129 W  
109 W  
in DAM*2  
18 W  
(You may hear a clicking noise during the download but this is normal.)  
Less than 0.13 W  
in standby  
with 120 V AC  
and less than  
0.2 W with 240 V  
AC  
Less than 0.17 W with 120 V AC and less than 0.23 W with 240 V AC  
Screen size  
(inches measured diagonally)  
60 inches  
52 inches  
46 inches  
40 inches  
Display resolution  
1,920 dots (horizontal) × 1,080 lines (vertical)  
Speaker  
Full range  
34 × 100 (2)  
1 3/8 × 4  
34 × 160 (2)  
1 3/8 × 6 3/8  
(mm)  
(inches)  
Dimensions with stand (mm)  
(inches) 56  
without stand (mm) 1,440 × 889 × 64 1,261 × 787 × 64 1,127 × 710 × 64 1,127 × 716 × 64 994 × 641 × 64  
(inches) 56 3/4 × 35 × 2 5/8 49 3/4 × 31 × 2 5/8 44 3/8 × 28 × 2 5/8 44 3  
1,440 × 927 × 380 1,261 × 819 × 400 1,127 × 742 × 320 1,127 × 748 × 320 994 × 673 × 290  
3
3
/
4
× 36  
/
8
× 15 49 3  
/4  
× 32 1  
/4  
× 15 3  
/4  
44 3  
/8  
× 29 1  
/4  
× 12 5  
/8  
44 3  
/8  
× 29 1  
/2  
× 12 5  
/8  
39 1  
/4  
× 26 1  
/2  
× 11 1  
/2  
/8  
× 28 1  
/4  
× 2 5  
/8  
39 1  
/4  
× 25 1  
/4  
× 2 5  
/8  
wall-mount hole pattern(mm)  
wall-mount screw size (mm)  
400 × 300  
300 × 300  
M6 (length: refer to diagram on page 16.)  
Mass  
with stand (kg)/(lb.)  
50.6/111.5  
43.3/95.4  
36.1/79.6  
30.1/66.3  
28.8/63.5  
24.8/54.7  
27.8/61.3  
24.0/52.9  
22.6/49.8  
19.2/42.3  
without stand (kg)/(lb.)  
Supplied accessories  
Optional accessories  
See “Checking the accessories” (page 4).  
Connecting cables / Support Belt Kit / Wall-Mount Bracket / Wall-Hanging Bracket  
(Continued)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Model name KDL-  
60NX810  
55NX811/  
55NX810  
46NX810  
46NX711/  
46NX710  
40NX711/  
40NX710  
System  
Television system  
NTSC: American TV standard  
ATSC (8VSB terrestrial): ATSC compliant 8VSB  
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)  
Channel coverage  
Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69  
Analog Cable: 1 - 135 / Digital Cable: 1 - 135  
Panel system  
LCD (Liquid Crystal Display) Panel  
8 W + 8 W + 10 W  
Speaker output  
Input/Output jacks  
CABLE/ANTENNA  
VIDEO IN 1/2  
75-ohm external terminal for RF inputs  
VIDEO / AUDIO  
COMPONENT IN  
YPBPR (Component Video) / Signal format: 480i, 480p, 720p, 1080i, 1080p  
AUDIO  
HDMI IN 1/2/3/4  
HDMI: Video: 480i, 480p, 720p, 720/24p, 1080i, 1080p, 1080/24p  
HDMI: Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits,  
Dolby Digital  
AUDIO (HDMI IN 2)  
AUDIO OUT  
500 mVrms (typical)  
DIGITAL AUDIO OUT (OPTICAL)  
PCM/Dolby Digital optical signal  
D-sub 15-pin, analog RGB  
Stereo mini jack  
PC IN  
PC/HDMI 2 AUDIO IN  
LAN  
10BASE-T/100BASE-TX connector (Connection speed may differ depending on the  
network environment. 10BASE-T/100BASE-TX communication rate and communication  
quality are not guaranteed for this TV.)*1  
USB/DLNA  
Refer to the i-Manual for supported format.  
3D Sync terminal for optional transmitter  
3D SYNC  
Power and others  
Power requirement  
Power consumption  
in use  
110-240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz)  
215 W  
18 W  
175 W  
156 W  
153 W  
137 W  
in DAM*2  
22 W  
(You may hear a clicking noise during the download but this is normal.)  
Less than 0.12 W with 120 V AC and less than 0.2 W with 240 V AC  
54.6 inches  
in standby  
Screen size  
(inches measured diagonally)  
60 inches  
46 inches  
40 inches  
(55 class)  
Display resolution  
Speaker  
1,920 dots (horizontal) × 1,080 lines (vertical)  
Full range  
(mm)  
(inches)  
(mm)  
20 × 70 (4)  
13/16 × 2 7/8 (4)  
Φ 60 (1)  
20 × 90 (2)  
13/16 × 3 5/8 (2)  
40 × 90 (1)  
Woofer  
(inches)  
Φ 2 3/8 (1)  
1 5/8 × 3 5/8 (1)  
Dimensions with stand  
withoutstand  
(mm)  
(inches)  
1,400 × 865 × 303 1,276 × 800 × 323 1,083 × 690 × 270 1,083 × 690 × 270 944 × 612 × 245  
1
1
1
3
55  
/8  
× 34  
/8  
× 12 50 1  
/4  
× 31 1  
/2  
× 12 3  
/4  
42 3  
/4  
× 27 1  
/4  
× 10 3  
/4  
42 3  
/4  
× 27 1  
/4  
× 10 3  
/4  
37  
/4  
× 24 × 9  
/
4
(mm)  
(inches)  
1,400 × 836 × 45 1,276 × 770 × 32 1,083 × 660 × 31 1,083 × 660 × 31 944 × 582 × 32  
1
7
3
1
3
1
1
1
55  
/
8
× 33 × 1  
/8  
50 1  
/4  
× 30 3  
/
8
× 1 3  
/
8
42  
/
4
× 26 × 1  
300 × 300  
M6 (length: refer to diagram on page 16.)  
/
4
42  
/
4
× 26 × 1  
/4  
37  
/4  
× 23 × 1  
/
4
wall-mount hole pattern(mm)  
400 × 300  
wall-mount screw size (mm)  
with stand (kg)/(lb.)  
Mass  
43.0/ 94.8  
36.6/ 80.7  
32.2/71  
26.9/59.3  
24.8/54.7  
20.5/45.2  
24.4/53.8  
20.5/45.2  
19.8/43.7  
16.1/35.5  
without stand (kg)/(lb.)  
Supplied accessories  
Optional accessories  
See “Checking the accessories” (page 4).  
Connecting cables / Support Belt Kit / Wall-Mount Bracket / Wall-Hanging Bracket /  
3D Glasses / 3D Sync Transmitter  
*1 For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).  
*2 Download Acquisition Mode (DAM) is used for software updates and/or collecting data for TV Guide On Screen.  
• Optional accessories availability depends on its stock.  
• Design and specifications are subject to change without notice.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This equipment complies with FCC/IC radiation  
exposure limits set forth for an uncontrolled  
environment. This equipment should be installed and  
operated with minimum distance 20 cm between the  
radiator and your body (excluding extremities: hands,  
wrists and feet).  
This device and its antenna(s) must not be co-located or  
operating with any other antenna or transmitter except  
Grant condition.  
Declaration of Conformity  
Trade Name: SONY  
Model: KDL-60NX810/KDL-60NX801/  
KDL-60NX800/KDL-55NX811/KDL-55NX810/  
KDL-52NX800/KDL-46NX810/KDL-46NX800/  
KDL-46NX711/KDL-46NX710/KDL-46NX700/  
KDL-40NX711/KDL-40NX710/KDL-40NX700  
Responsible Party: Sony Electronics Inc.  
Address: 16530 Via Esprillo,  
Note  
San Diego, CA 92127 U.S.A.  
Telephone Number: 858-942-2230  
This television includes a QAM demodulator which should  
allow you to receive unscrambled digital cable television  
programming via subscription service to a cable service  
provider. Availability of digital cable television programming  
in your area depends on the type of programming and signal  
provided by your cable service provider.  
This device complies with part 15 of the FCC rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) this device must accept any interference received,  
including interference that may cause undesired operation.  
Compatible optional accessories  
information  
Use the following Sony optional accessories with  
your TV model.  
For customers in Canada  
This Class B digital apparatus complies with Canadian  
ICES-003.  
FCC Related Information  
Sony Model No.  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
KDL-  
60NX801/ 52NX800 46NX800 40NX700  
60NX800  
46NX700  
Sony Wall-  
interference in a residential installation. This  
Mount Bracket SU-WL500  
SU-WL700  
equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there  
is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
1
*
Model No.  
Sony Wall-  
HangingBracket  
SU-WH500  
1
*
Model No.  
Sony TV  
Stand No.  
SU-52NX1 SU-46NX1 SU-40NX1  
Sony Model No.  
2
*
KDL-  
60NX810 55NX811/ 46NX810/ 40NX711/  
55NX810 46NX711/ 40NX710  
46NX710  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment  
and receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
Sony Wall-  
Mount Bracket SU-WL500  
SU-WL700/WL500  
1
*
Model No.  
Sony Wall-  
HangingBracket  
SU-WH500  
1
*
Pursuant to FCC regulations, you are cautioned that  
any changes or modifications not expressly approved  
in this manual could void your authority to operate  
this equipment.  
Model No.  
Sony TV  
Stand No.  
SU-B550S SU-B460S SU-B400S  
2
*
Use with other optional accessories may cause instability  
and could result in property damages or injury.  
Safety and Regulatory  
1
To prevent radio interference to the licensed service,  
this device is intended to be operated indoors and away  
from windows to provide maximum shielding.  
Equipment (or its transmit antenna) that is installed  
outdoors is subject to licensing.  
* For instructions on using with your TV please go to  
download “Additional Information for Using Sony  
Wall-Mount Bracket” or “Additional Information for  
Using Sony Wall-Hanging Bracket”.  
* Some of these TV stand models may not be available  
in your area.  
2
Only use Wireless LAN indoors when using it with  
IEEE 802.11a/n (5 GHz).  
High power radars are allocated as primary users  
(meaning they have priority) of 5250-5350 MHz and  
5650-5850 MHz and these radars could cause  
interference and/or damage to this device.  
This device uses 5 GHz band for wireless LAN  
communication and the maximum gain of the antenna  
in this device is 6 dBi.  
To Customers  
Sufficient expertise is required for TV installations. Be  
sure to subcontract the installation to a Sony dealer or  
licensed contractor and pay adequate attention to safety  
during the installation.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
For Your Convenience  
Be sure to register your TV.  
Online  
Registration:  
United States  
Canada  
Your TV is capable of receiving software updates. For the  
latest information about software updates for your TV, visit:  
United States  
Canada  
Software  
Updates:  
NOTE: If your TV is connected to the Internet, you can check  
for software updates by selecting Settings, Product  
Support and then Automatic Software Update.  
© 2010 Sony Corporation Printed in U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shure Microphone mx391 User Manual
Sony Car Stereo System CDX L490B User Manual
Sony Cassette Player WM ES392 User Manual
Sony Flat Panel Television XBR60LX900 User Manual
Sony Graphics Tablet SGP321 User Manual
Sony Turntable PS LX300USB User Manual
StarTechcom Garage Door Opener VS221DP User Manual
Sunbeam Air Cleaner 2571 User Manual
Suncast Greenhouse Kit RB448 User Manual
Sylvania Flat Panel Television 6632LCT User Manual