2-680-628-11 (1)
4J.B8A04.001
DVD/CD
Rewritable Drive
Operating Instructions
JP
FR
DE
ES
IT
CS
DRX-820UL-T
© 2006 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
CE Sicherheitsbestimmungen
Diese Ausrüstung erfüllt die Europäischen EMC-Bestimmungen für die Verwendung in
folgender / folgenden Umgebung(en):
• Wohngegenden
• Gewerbegebiete
• Leichtindustriegebiete
(Diese Ausrüstung erfüllt die Bestimmungen der Norm EN55022, Klasse B.)
CAUTION
The mains plug on this equipment must be used to disconnect mains power.
Please ensure that the socket outlet is installed near the equipment and shall be easily
Accessible.
Achtung
Zur Trennung vom Netz ist der Netzsecker aus der Steckdose zu ziehen, welche sich in der
Nähe des Gerätes befinden muß und leicht zugänlich sein soll.
Compliance Statements
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall
not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local Civic Office, your
household waste disposal service or the shop where you purchased the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Table of Contents
Safety Regulations .......................... 2
Compliance Statements ..................3
Operation
Using the Drive .............................16
Supplied Software .......................16
Introduction
Using Generic Software with the
Drive ...........................................17
Unpacking the Package Contents ... 6
Features ........................................... 6
System Requirements ..................... 7
Part Names and Functions .............. 8
Compatible Discs ..........................18
Recommended Writable Discs ...20
Writable Disc Features ...............21
Precautions on Writing/
Playing Discs ................................25
Maximizing Performance ..............27
Setup
Reaching the Highest Possible Data
Transfer Rate ..............................27
Placing the Drive .......................... 10
Using the Drive Vertically ......... 10
Using the Drive Horizontally ..... 10
Connection through i.LINK .......... 11
Before Connection ..................... 11
Installation .................................. 11
Disconnection ............................. 13
Connection through USB ............. 14
Before Connection ..................... 14
Installation .................................. 14
Disconnection ............................. 15
Updating the Firmware ...............27
Turbo Boost Function .................27
Miscellaneous
Precautions for Use .......................28
Specifications ................................29
Support Overview .........................31
User Support Web Site ...............31
Update the Drive Firmware ........31
Product and Support
Information .................................31
Download from Www.Somanuals.com. All Manuals Search And Download.
4
•
is a trademark of Sony Corporation.
• Pentium is a registrated trademark of Intel Corporation.
• Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
• Macintosh, Mac OS, Power Macintosh, FireWire and iDVD are trademarks of Apple Computer,
Inc., registered in the U.S. and other countries.
• Other system and product names used herein are registered trademarks or trademarks of their
❑ Our product warranty is valid only when the supplied accessories (including software) are
used in the specified or recommended system environment, in accordance with the
documentation, and applies only to this DVD/CD rewritable drive. Our customer service
and user support apply only under these product warranty conditions.
❑ Please note that we cannot accept responsibility for failure of the computer or other
devices, incompatibility with special hardware, operating problems caused by improper
installation of software, loss of data, discs or other accidental or incidental damage that
might occur when using this product.
❑ The guarantee and user support for this product are valid only within the countries or sales
regions specified on the warranty card.
❑ Copyright laws prohibit the copying in part or in full of the supplied software and
documentation, or loaning the software, without obtaining permission of the copyright
holder.
❑ We cannot accept responsibility for any direct or indirect financial damage or loss of profit
that might occur when using the supplied software.
❑ The supplied software can only be used with this product.
❑ Specifications of the supplied software may be changed without notice in the interest of
product improvement.
Please Record Responsibly
Before copying anything onto a disc, please be sure that you are not violating copyright
laws. Most software companies allow you to make a backup or archive copy of software.
Check your software’s license agreement for details.
About i.LINK
These operating instructions include IEEE1394 and FireWire in the expression i.LINK.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
B Introduction
Unpacking the
Package Contents
Features
This product offers the following features.
Please verify that the package contains the
following when unpacking.
If any of these items appear to be missing
and/or damaged, please contact your dealer.
❑
An external DVD/CD rewritable drive
with i.LINK (IEEE1394) and Hi-Speed
USB (USB 2.0-compliant) interfaces for
computers.
❑
❑
Can be used horizontally or vertically.
• Drive
The drive can write to DVD+R
Double Layer and DVD-R Dual Layer
discs.
❑
You can write at a maximum of 16x
when using high speed DVD+R, DVD-
R discs.
• i.LINK cable (6-pin to 4-pin)
❑
❑
The drive can write to DVD-RAM discs.
Features the
technology to prevent buffer underrun
errors.
• Hi-Speed USB cable
• Quick start guide
• Operating instructions (this document)
• AC power cord
• AC adapter (MPA-AC1)
• Software Quick Start Guide (for Windows)
• Software Quick Start Guide
(for Macintosh)
• Software disc (for Windows)
• Software disc (for Macintosh)
• Stand
• Warranty card
Note
Make sure that you back up the supplied
software disc on another disc because the
software disc is not distributed independently.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Notes
System
• These operating instructions include IEEE1394
and FireWire in the expression i.LINK.
• You must use discs that are compatible with the
write speed you have selected.
• Writing speed may automatically be adjusted
depending on the disc, specified disc speed, or
disc conditions such as weight imbalance and
eccentricity.
• System should meet following requirements in
order to use USB 2.0 operation with this device.
− Hi-Speed USB (USB 2.0-compliant)
interface cable (included).
Requirements
The drive should be used with a system that
meets the following requirements1).
Windows
❑
PC/AT-compatible computer
❑
CPU: Pentium III, 800 MHz or higher
(with Nero Vision Express: Pentium 4,
1.6 GHz recommended)
− System equipped with a Hi-Speed USB (USB
2.0-compliant) connector or PCI adapter
card, and running the USB 2.0 EHCI device
driver1).
❑
❑
RAM: 256 MB or higher
1 GB (with Nero Vision Express:
10 GB) free hard disk space
1)
The USB 2.0 EHCI driver software is
❑
Operating system:
supplied with currently available PCI
adapter cards that conform to USB 2.0.
You can also use the USB 2.0 EHCI driver
software supplied with Windows 2000 SP4
and Windows XP SP1.
Windows 2000 Professional
(referred to as Windows 2000),
Windows XP Home Edition or
Windows XP Professional
(referred to as Windows XP)
For details, contact your USB 2.0 adapter
dealer or consult the Microsoft
❑
i.LINK or USB connector
Corporation Web site.
• When connected to a product that does not
support Hi-Speed USB, the maximum transfer
rate is limited to 12 Mbps (equivalent to a USB
1.1 transfer rate).
Macintosh
❑
A Power Macintosh G3 or later capable
of running Mac OS X 10.2 or later
• For a Macintosh, depending on the
specifications of your computer, you may not be
able to achieve the proper read/write speeds
because the USB transfer rate is limited.
• You cannot use the i.LINK and USB interfaces
simultaneously.
❑
❑
RAM: 256 MB or more
200 MB or more available hard disk
space
Operating system: Mac OS X 10.2 or
later
FireWire or USB connector
❑
❑
1)
The above requirements are the minimum
necessary requirements to write to disc
normally. Under actual operating conditions,
the requirements imposed by your software
must also be met. For details, refer to your
software documentation.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Part Names and Functions
Front Panel
1
2
3
4
Rear Panel
5
6
7
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
8
A Busy indicator
E Power Switch
Indicates the drive status.
Press to turn the drive on or off.
Lit:
The drive is reading data,
playing back an audio CD, or
writing packets.
F USB Connector
Used with a USB cable to connect the
drive to a computer.
Blinking:
The drive is writing data
(disc-at-once, track-at-once),
formatting a disc, or
G i.LINK S400 Connector (6-pin)
Used with an i.LINK cable to connect
the drive to a computer.
deleting1) data from a disc.
The drive is in a state other
than those outlined above.
Off:
H i.LINK S400 Connector (4-pin)
1)
Some drives indicate this state with the lit
indicator.
Used with an i.LINK cable to connect
the drive to a computer.
B Eject button
I DC IN Jack
Press to open and close the disc tray.
Connect the supplied AC power cord to
the AC power adapter. Connect this
assembly to the DC IN jack, and then
connect the whole to the AC outlet.
C Emergency eject hole
If you cannot open the disc tray with the
eject button, turn off the drive, and then
insert a thin, elongated object into this
hole to eject the disc tray manually.
D Disc tray
Insert discs here, label side up.
Hint
When you insert a disc into the drive, make
sure that it is under the four pins. When using
the drive vertically, make sure that you set the
disc inside the two lower pins.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
B Setup
Placing the Drive
Using the Drive Vertically
Attach the supplied stand as illustrated below to use the drive vertically.
Position the drive so that the stand straddles the two anti-vibration pads on the
drive bottom and then press it into place.
Using the Drive Horizontally
Place the drive as illustrated below to use the drive horizontally.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Connection through i.LINK
Note
This product including bundled software functions properly under Windows XP, Windows
2000, and Mac OS X (10.2 or later).
It may not fulfill all functional and performance specification under other OS (operating
system) environment.
Before Connection
• Refer to the list of contents to verify that the package contents are complete.
• If your computer is not equipped with an i.LINK connector, install an i.LINK
interface card.
• Check the type of i.LINK connector provided with your computer’s i.LINK
interface and obtain a compatible i.LINK cable.
i.LINK S400 connector (6-pin)
i.LINK S400 connector (4-pin)
• Have the manual for your computer handy.
Installation
These instructions apply to most commonly used computers.
CAUTION
Using the wrong type of cable with this product can cause it to malfunction. Follow the
instructions when connecting the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
1 Start your computer.
2 Connect the necessary cables, then turn on the drive.
• Connect the i.LINK cable to the 6-pin i.LINK connector on the drive.
− For a computer’s 4-pin i.LINK connector: connect to the 6-pin i.LINK
connector on the drive.
− For a computer’s 6-pin i.LINK connector: connect to the 4-pin i.LINK
connector on the drive.
• Connect the supplied AC power cord to the supplied AC adapter. Then
connect the AC adapter to the drive’s DC IN jack, and connect the power
cord to the power outlet.
Power Switch
i.LINK Cable
4-pin
6-pin
or
4-pin
6-pin
AC adapter
AC power cord
Hint
The i.LINK cable may be connected to either of the two i.LINK connectors on the back
of the drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
3 Connect the other end of the i.LINK cable to your computer.
Note
Please connect the drive directly to your computer.
4 Insert the supplied software disc into the DVD/CD rewritable
drive and install the software.
Refer to the Software Quick Start Guide for details.
Disconnection
The disconnection procedure varies depending on your OS.
Windows
When your computer detects the drive successfully,
appears on the
Windows task bar. When you want to disconnect the drive, you must first stop
it using this icon.
1 Click
on the task bar, and click the drive to be disconnected
on the shortcut menu.
2 Operate following the message displayed, if any.
3 Disconnect the i.LINK cable.
Note
If you disconnect the i.LINK cable without performing the procedure above, your computer
may operate erratically or data may be damaged. Be sure to perform the procedure above
before disconnecting the i.LINK cable.
Mac OS
With Mac OS X, first confirm that there is no disc in the drive. Confirm that the drive’s busy
indicator is not lit, and then disconnect the i.LINK cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Connection through USB
Note
This product including bundled software functions properly under Windows XP, Windows
2000, and Mac OS X (10.2 or later).
It may not fulfill all functional and performance specification under other OS (operating
system) environment.
Before Connection
• Refer to the list of contents to verify that the package contents are complete.
• If your computer is not equipped with a USB connector, install a USB
interface card.
• Have the manual for your computer handy.
Installation
These instructions apply to most commonly used computers.
For connection cautions, refer to the “Installation” section in “Connection
through i.LINK” on page 11.
1 Start your computer.
2 Connect the necessary cables, then turn on the drive.
• Connect the USB cable to the drive’s USB connector.
• Connect the supplied AC power cord to the supplied AC adapter. Then
connect the AC adapter to the drive’s DC IN jack, and connect the power
cord to the power outlet.
USB Cable
Power Switch
AC adapter
AC power cord
Download from Www.Somanuals.com. All Manuals Search And Download.
14
3 Connect the other end of the USB cable to your computer.
Note
Connect the drive to a USB connector on the computer.
4 Insert the supplied software disc into the DVD/CD rewritable
drive and install the software.
Refer to the Software Quick Start Guide for details.
Disconnection
The disconnection procedure varies depending on your OS.
Windows
When your computer detects the drive successfully,
appears on the
Windows task bar. When you want to disconnect the drive, you must first stop
it using this icon.
1 Click
on the task bar, and click the drive to be disconnected
on the shortcut menu.
2 Operate following the message displayed, if any.
3 Disconnect the USB cable.
Note
If you disconnect the USB cable without performing the procedure above, your computer
may operate erratically or data may be damaged. Be sure to perform the procedure above
before disconnecting the USB cable.
Mac OS X
With Mac OS X, first confirm that there is no disc in the drive. Confirm that the drive’s busy
indicator is not lit, and then disconnect the USB cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
B Operation
Using the Drive
Use the supplied software to create discs and play back DVDs. Refer to the
documentation of each software for details about their operation.
Supplied Software
The supplied software disc contains the following software.
For Windows
Nero StartSmart
Nero StartSmart serves as the command center to quickly start all the software
of the Nero suite.
Nero Burning ROM SE
Nero Burning ROM is the CD and DVD writing software.
Nero Express
A light version of the Nero Burning ROM software. Makes it even easier job
to create CDs and DVDs.
Nero BackItUp
Nero BackItUp is software that allows you to back up the data on your hard
disk to the hard disk, DVD+R/RW, DVD-R/RW, DVD-RAM, or CD-R/RW
discs.
InCD
InCD is a packet writing software. It supports writing to DVD+RW,
DVD-RW, DVD-RAM, and CD-RW.
NeroVision Express
DVD-Video and video CD authoring software.
Nero ShowTime
DVD-Video and video CD playback software.
Nero Record
Nero Recode is software for compiling, copying and archiving DVD-Video
titles and other video files (that are not copy-protected) onto DVD+R/RW,
DVD-R/RW, DVD-RAM, or CD-R/RW discs.
Nero Wave Editor
Audio processing software that allows you to modify and such audio files as
WAV, MP3, and WMA.
Nero Cover Designer
CD and DVD cover and label creation software.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Nero MediaHome
This software allows you to share video and audio files among several
computers on a network connection and to play back such files seamlessly
from any of the connected computers.
Nero PhotoSnap
This software can be used to edit image and picture files.
Nero PhotoSnapViewer
This software can be used to view image and picture files.
Nero Toolkit
The utilities of Nero Toolkit provide information about the system and more.
Nero CD-DVD Speed tests the speed of the existing drives. Nero DriveSpeed
adjusts the write speed to minimize drive noise. Nero InfoTool provides the
main characteristics of drives, the discs they contain, and the installed
software.
For Mac OS
Roxio Toast Lite
Roxio Toast Lite is the CD and DVD writing software.
Notes
• Roxio Toast Lite only offers basic features. To use more advanced features, you must
purchase additional third-party software.
• DVD playback software for Mac OS is not included with the supplied software disc.
• The iDVD program does not support third-party drives including this product.
Using Generic Software with the Drive
Using software other than the supplied software (such as generic software,
shareware, or freeware) to write data to disc with this drive is not under
warranty and Sony offers no customer service if problems arise from using
such software.
Make sure that the supplied writing software and generic writing software do
not coexist on your computer. Taking appropriate steps to avoid this situation,
especially in the case of packet writing software1) or format utility2) will help
prevent erratic operation of the software and/or computer.
If the generic software you are using does not detect the drive correctly, visit
the Web site of the software manufacturer and update the software, as this may
solve the problem.
1)
Such as Roxio’s Drag-to-Disc, BHA’s B’s CLIP, and Sonic’s DLA
Such as BHA’s DVD-RAM Driver and Panasonic’s DVDForm
2)
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Compatible Discs
The following discs are compatible with the drive.
DVD
1)
Disc types
Logo
Read
Write
Write speed
Speed supported by the disc
(max. 16×)
DVD+R
DVD+R DL
(Double layer)
Speed supported by the disc
(max. 8×)
Speed supported by the disc
(max. 4×)
DVD+RW
DVD+RW
(High Speed)
Speed supported by the disc
(max. 8×)
Speed supported by the disc
(max. 16×)
DVD-R
DVD-R DL
(Dual Layer)
Speed supported by the disc
(max. 6×)
R DL
Speed supported by the disc
(max. 6×)
DVD-RW
Speed supported by the disc
(max. 5×)
2)
DVD-RAM
DVD-ROM
DVD-Video
—
—
—
—
1)
Writing speed supported by the drive. Depending on your software and media, this speed
may vary.
For more details on writing speed by disc type, access the user support Web site (see
page 31).
2)
Use a non-cartridge-type disc or a cartridge from which the disc can be ejected.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
CD
1)
Disc types
Logo
Read
Write
Write speed
CD-R
Speed supported by the disc
(max. 48×)
CD-RW
Speed supported by the disc
(max. 4×)
CD-RW
(High Speed)
Speed supported by the disc
(max. 10×)
CD-RW
(Ultra Speed)
Speed supported by the disc
(max. 24×)
CD-RW
(Ultra Speed Plus)
Speed supported by the disc
(max. 32×)
CD-ROM
—
—
—
—
—
—
—
—
—
—
CD-DA
(audio only)
CD Extra
Video CD
CD TEXT
1)
Writing speed supported by the drive. Depending on your software and media, this speed
may vary.
For more details on writing speed by disc type, access the user support Web site (see
page 31).
Disc diameters
12 cm
Read
Write
DVD
8 cm
—
12 cm
CD
8 cm
Notes
• Only round discs should be used with this drive. Attempting to read odd-shaped discs
(stars, hearts, card shape, etc.) may damage the drive.
• Operation is not guaranteed when writing to or playing back 99 minute discs.
• With 8 cm discs, you must place the drive horizontally.
• When using a double-sided disc, orient the drive horizontally.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Recommended Writable Discs
We recommend that you only use discs for which operation has been
guaranteed. You can obtain the latest list of writable discs for which operation
with this drive has been guaranteed at the user support Web site address (see
page 31 for details).
User support Web site
Insert the supplied software disc into the drive, and in the [Menu Selection]
screen, click [User Support Web Page]. You can also directly type the user
support Web site address (see page 31 for details) in the address box of your
Web browser.
Note
You can safely use most disc formats that comply to the appropriate standards with this drive.
However, bear in mind that some generic discs do not comply to quality or performance
standards necessary for safe use with this drive. If you use such discs, the drive may
automatically adjust the writing speed, writing errors may occur, and discs that have been
written to may generate reading errors, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Writable Disc Features
You can use a variety of discs with the drive to write data. Refer to the table
below to find the type of disc that matches what you want to do.
DVD+R
DVD+R DL
DVD-R
DVD-R DL
DVD-
RAM
DVD+RW
DVD-RW
CD-R CD-RW
Want to create DVD-
Video that can be
played back by most
drives and/or players
Want to create DVDs
that you can modify
Want to create DVDs
to which you can add
to later.
Want to create video
CDs that can be played
back with most
computers
Want to use DVDs as
you would video tapes
(allowing multiple
rewrites)
Want to share 700 MB
of data or more
Want to share data that
can be used on most
computers
Want to create audio
CDs that be played
back by most CD
players
Want to back up your
hard disk
Want to store data
without deleting it
Want to use discs as
floppy disks
Note
You can access/play back the data written to the discs above with most drives/players that
support their formats. However, some combinations of drives/players and discs (depending
on their quality and/or characteristics) may make access/playback impossible. For details,
refer to your drive/player documentation.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Writable CDs and compatibility
The drive can write to CD-R and CD-RW discs, when used with writing
software.
To play back (read) these CD-R and CD-RW discs on other CD-ROM drives,
make settings on the writing software according to the purpose of the data.
CD-R Discs
Data can be written to this type of disc only once, and once it has been written,
it cannot be erased. Music CDs created on CD-R disc media can be played on
standard CD players.
CD-RW Discs
Data can be written to and erased from this type of disc repeatedly. Typically,
a new CD-RW disc can be rewritten about 1,000 times.
Music CDs created on CD-RW disc media cannot be played on a CD player
unless it is designed to be CD-RW compatible.
High Speed CD-RW Discs
The drive can write to High Speed CD-RW disc media. Data written on High
Speed CD-RW discs can be read by standard CD-ROM drives.
Note
Drives that do not have the High Speed CD-RW logo cannot be used to write to High Speed
CD-RW discs. When writing or adding to such discs with a drive other than this one, make
sure that the drive has the High Speed CD-RW logo. Also, always set the writing speed to
that specified for the particular High Speed CD-RW disc media being used.
Ultra Speed CD-RW Discs
The drive can write to Ultra Speed CD-RW disc media. Data written on Ultra
Speed CD-RW discs can be read by standard CD-ROM drives.
Note
Drives that do not have the Ultra Speed CD-RW logo cannot be used to write to Ultra Speed
CD-RW discs. When writing or adding to such discs with a drive other than this one, make
sure that the drive has the Ultra Speed CD-RW logo. Also, always set the writing speed to
that specified for the particular Ultra Speed CD-RW disc media being used.
Ultra Speed Plus CD-RW Discs
The drive can write to Ultra Speed Plus CD-RW disc media. Data written on
Ultra Speed Plus CD-RW disc can be read by standard CD-ROM drives.
Note
Drives that do not have the Ultra Speed Plus CD-RW logo cannot be used to write to Ultra
Speed Plus CD-RW discs. When writing or adding to such discs with a drive other than this
one, make sure that the drive has the Ultra Speed Plus CD-RW logo. Also, always set the
writing speed to that specified for the particular Ultra Speed Plus CD-RW disc media being
used.
Writing Speed
When writing to CD-R and CD-RW discs, set the writing speed to that
specified on the disc. Change the writing speed on the writing software.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
About playback/reading compatibility in CDs
CD-R and CD-RW discs created with the drive can be read on most CD-ROM
drives. However, some older CD-ROM drives cannot read CD-RW discs.
In addition, CD-R music discs created and finalized with the drive can be
played on most CD players, however, there are some CD players and
automobile CD players that do not guarantee playback of CD-R discs.
Also, CD-R music discs created with the drive can be played back on many
standard CD players. However, depending on the type of your player, playback
of CD-R and CD-RW discs may not be supported.
Further, because of the differences in quality and characteristics between
various CD-ROM drive, CD player, CD-R disc, and CD-RW disc
manufacturers, playback may not be possible depending on the combination.
Writable DVDs and compatibility
The drive can write to DVD+R DL, DVD+R, DVD-R DL, and DVD-R discs,
as well as to DVD+RW, DVD-RW and DVD-RAM discs, when used with
writing software. The playback (read) compatibility of data written by this
drive depends on the capabilities of the DVD-ROM drives or the DVD players
and on the logical format selected when the disc is recorded (written).
DVD+R DL/DVD+R/DVD-R DL/DVD-R Discs
Data can be written to this type of disc only once. Once it has been written, it
cannot be erased. Playback (read) compatibility of DVD+R and DVD-R discs
depends on the capability of the DVD-ROM drive and the DVD player and on
the logical format selected when it is recorded (written).
DVD+RW and DVD-RW Discs
Data can be repeatedly written to or erased from this type of disc. Typically, a
new DVD+RW or DVD-RW disc can be rewritten about 1,000 times.
Playback (read) compatibility of DVD+RW and DVD-RW discs depends on
the capability of the DVD-ROM drive and the DVD player and on the logical
format selected when it is recorded (written).
DVD-RAM Discs
Data can be repeatedly written to or erased from this type of disc. Typically, a
new DVD-RAM disc can be rewritten about 100,000 times. To play back (or
read the data on) a DVD-RAM disc, a DVD-ROM drive or DVD player that
supports DVD-RAM discs is required.
About playback/reading compatibility in DVDs
DVD+R DL/DVD+R/DVD-R DL/DVD-R discs, as well as DVD+RW and
DVD-RW discs created and finalized with the drive can be played back on
almost all DVD-ROM drives. However depending on the type of your drive,
playback of DVD+R DL, DVD+RW, DVD-R DL, and DVD-RW discs may
not be supported.
In addition, some drives do not support multi-session (DVD+R DL/DVD+R/
DVD+RW) or multi-border (DVD-R DL/DVD-R/DVD-RW). In these cases,
Download from Www.Somanuals.com. All Manuals Search And Download.
23
you can only play back the disc in single-session (DVD+R DL/DVD+R/
DVD+RW) or single-border (DVD-R DL/DVD-R/DVD-RW).
Also, DVD-Video discs created with the drive can be played back on many
standard DVD players. However depending on the type of your player,
playback of DVD+RW and DVD-RW discs may not be supported.
Playback of DVD-RAM discs is only supported for DVD-RAM compatible
DVD drives and DVD players.
Further, because of the differences in quality and characteristics between
various DVD-ROM drive, DVD player, DVD+R DL disc, DVD+R disc,
DVD+RW disc, DVD-R DL disc, DVD-R disc, DVD-RW disc and DVD-
RAM disc manufacturers, playback may not be possible depending on the
combination. (Playback compatibility is not under warranty.)
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Precautions on Writing/Playing Discs
Write speed and compatible discs
• When writing data to disc at high speeds, you must use the appropriate type
of disc.
• Configure the writing speed through your writing software. For details about
the setting procedures, refer to your writing software documentation.
• When writing data to disc, the drive may adjust the writing speed to the
quality of the disc in the drive. Depending on the transfer rate, there may also
be limitations on writing speeds.
DVD region codes
The playback of DVD-Video (DVD discs) is protected and controlled by a
region code setting. For the drive to play back DVD-Video, the region code on
the DVD disc, the region code of the drive, and the region code of the
DVD-Video software must all match.
With this drive, the region code can be set up to five times, including the initial
assignment (RPC phase 21) standard). After setting the region code five times,
the setting becomes permanent and can no longer be changed. From this point
on, you are only able to play back DVD-Video whose region code matches the
one set the fifth time.
Do not attempt to make unauthorized changes to the region code. Any
problems resulting from doing so are not covered by the warranty.
Hint
You can change the region code of the drive on it’s properties dialog box accessible from the
Device Manager.
Precautions when playing back DVD-Video
DVD-Video disc playback conditions are sometimes determined by software
manufacturers. Because the drive plays back discs as determined by software
manufacturers, some drive functions may not always perform as expected.
When playing back DVD-Video, refer to the documentation accompanying
each disc.
DVD copy protection technology
Most DVD-Video discs on the market are protected against unauthorized
copy. Attempting to copy protected discs violates copyright laws.
1)
Region Playback Control (RPC) standard.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Copy controlled CDs
This product is designed to play back discs conforming to the compact disc
(CD) standard. Audio CDs encoded with copyright protection technology are
now marketed by various record companies. Be aware that some of these discs
do not conform to the CD standard and you may not be able to play them back
with the drive. When using the drive as an audio CD player, only use audio
CDs with the following mark. Some of these discs are encoded in such a way
as to prevent sampling and/or copy, while others can only be played back
under certain conditions. For details, refer to the documentation of your audio
CD.
Attention Regarding DualDisc Software
A DualDisc is a two sided disc product which mates DVD recorded material on
one side with digital audio material on the other side.
However, since the audio material side does not conform to the Compact Disc
(CD) standard, playback on this product is not guaranteed.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Maximizing Performance
Reaching the Highest Possible Data Transfer Rate
Make sure that you use High Speed discs for which this operation has been
certified by Sony. For the latest information about these discs, visit the user
support Web site. When using discs other than those mentioned above, the
drive may limit writing speed to preserve a good reading quality.
Updating the Firmware
We recommend using the drive with the latest firmware as some problems
encountered when using the drive can be solved simply by updating the drive
firmware. Firmware updates are available on the user support Web site. see
page 31 for details.
Hint
The firmware is the built-in software that makes the drive work.
Turbo Boost Function
The default CD-R and CD-ROM read/write speed of this drive is 40× speed.
With a single touch, you can activate the Turbo Boost function, to raise the
read/write speed to 48× speed.
Notes
• On rare occasions, some discs may not be able to tolerate 48× speed, causing them to break.
We recommend that you do not use deeply scratched, brittle, or other discs that may break
at 48× speed.
• The Turbo Boost function does not guarantee a 48× write speed. Depending on the
condition of the disc you are using, the speed may be automatically lowered.
• The Turbo Boost function does not increase read/write speed with CD-RW discs.
1 Insert a disc into the drive.
The read/write speed when you insert a disc is normally 40× speed.
2 Press and hold the Eject button for five seconds.
The Busy indicator blinks twice and the read/write speed switches to 48×
speed. (The Turbo Boost function is active.)
Hint
When you open the disc tray, the read/write speed reverts to its default of 40× speed.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
B Miscellaneous
• Do not store discs in dusty, dirty or humid
locations, in direct sunlight, or near heat-
generating devices.
• To protect important data, always keep
discs in their protective cases.
Precautions for Use
Operation and storage conditions
Avoid using or storing the drive in a hot or
humid location, or where it might be subject
to severe vibration or direct sunlight.
• Do not wipe writable discs to clean them
before recording data. Instead, use a
blower to remove any dust.
• Data may not record properly if a scratch
or dust is present on the unrecorded area of
writable discs. Use special care when
handling.
On transportation
• Please repack the drive in its original
carton when shipping by itself.
• If the drive is to be shipped while installed
in a PC, remove any disc beforehand.
Avoiding condensation problems
As much as possible, avoid sudden
temperature changes. Do not attempt to use
the drive immediately after moving it from a
cold to a warm location, or raising the room
temperature suddenly, as condensation may
form within the drive. If the temperature
changes suddenly while using the drive, stop
using it but keep the power on for at least an
hour.
Handling discs
• Handle discs only by the edges. Never
touch the recording surface.
• Do not affix labels on discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Writing systems
Specifications
DVD
Random write
Sequential write
Compatible discs
Read
(max.)
Write
(max.)
DVD+R (4×)
16×-CAV
16×-CAV
16×-CAV
12×-CAV
4
×
CD
DVD+R (8×)
8×-PCAV
16×-CAV
2.4×
Track-at-once
Disc-at-once
Session-at-once
Packet writing
DVD+R (16×)
DVD+R Double Layer
DVD+R Double Layer(8×) 12×-CAV
8×-ZCLV
2.4×
DVD+RW
12×-CAV
DVD+RW (4×)
12×-CAV
4
×
DVD+RW (High Speed) 12×-CAV
8×-ZCLV
Drive
DVD-R (4×)
16×-CAV
16×-CAV
16×-CAV
12×-CAV
12×-CAV
12×-CAV
12×-CAV
16×-CAV
4×-CAV
4
×
DVD-R (8×)
8×-PCAV
Data transfer rate
4)
DVD-R (16×)
DVD-R Dual Layer
DVD-RW (2×)
DVD-RW (4×)
DVD-RW (6×)
DVD-ROM
16×-CAV
DVD: 22.1 MB/s (16× speed )
4)
6
2
4
6
—
—
×
×
×
×
CD: 7.2 MB/s (48× speed )
Access time
Average random stroke
Approx. 140 ms (DVD)
DVD-Video
DVD-RAM1)
CD-R
5×
5×
Approx. 130 ms (CD)
48×-CAV2) 48×-CAV2)
4)
Maximum data transfer rate depends on the
CD-RW
CD-RW (High Speed)
CD-RW (Ultra Speed)
40×-CAV
40×-CAV
40×-CAV
4×
capabilities of the host computer.
10×
24×-CAV
32×-CAV
—
CD-RW (Ultra Speed Plus) 40×-CAV
Buffer underrun error protection
CD-ROM
48×-CAV2)
CD-DA
CD-DA (DAE)
4
×
—
—
40×-CAV
Operating environment
Disc diameters
DVD
12 cm
8 cm3)
12 cm
8 cm3)
Operating temperature
5 to 35 ºC
—
CD
1)
Power and miscellaneous
Use a non-cartridge-type disc or a cartridge
from which the disc can be ejected.
Power source
DC +12 V (supplied from the DC IN jack)
2)
3)
The default setting is 40×. You must use the
turbo boost function to achieve 48× speed.
Consumption
Max. 3.0 A
With 8 cm discs, you must place the drive
horizontally.
Depending on your system, there may be
limitation on maximum writing speed.
AC adapter
AC 100 - 240 V (use a power cord
appropriate to the region or country of use)
Size
Approx. 52 × 164 × 250 mm (W×H×D)
(excluding front panel)
Weight
Approx. 1.6 kg (drive only)
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Laser
CD
Wavelength: 784 +3/-4 nm
Output power (max.): 120 mW (CW)
240 mW (Pulse)
DVD
Wavelength: 658 4 nm
Output power (max.): 100 mW (CW)
250 mW (Pulse)
Interface
Drive interface
IEEE1394-compliant (6-pin connector) ×1
IEEE1394-compliant (4-pin connector) ×1
USB 2.0-compliant (Hi-Speed USB) ×1
Buffer capacity
2 MB
Drive product number (Inquiry)
SONY DVD RW DRU-820A
Design and specifications are subject to
change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Product and Support
Information
Support Overview
If you have problems with the drive, or are
unsure of a procedure or some other details,
please contact your Sony customer support
center.
Sony Global Sites Information
(As of January, 2006)
Product purchased in the USA:*
User Support Web Site
Product purchased in Australia or New
Zealand:
You can find the following information on
this Web site. The information is
periodically updated, so we recommend that
you visit regularly.
* Local Web sites for computer peripheral
products
• Information about the drive
• Information about the software supplied
with the drive
• Latest firmware
• Frequently asked questions
• Troubleshooting guide
• Certified compatible computers
• Certified compatible discs
• Operating instructions
• Et cetera
About the Bundled Software
Detailed information about the supplied
software is available on the Web sites of the
software manufacturer.
For Windows
For Mac OS
Accessing the user support Web
site
Insert the supplied software disc into the
drive, and in the [Menu Selection] screen,
click [User Support Web Page]. You can
also directly type the user support Web site
address (see Product and Support
Information for details) in the address box of
your Web browser.
Update the Drive Firmware
Some problems encountered when using the
drive can be solved simply by updating the
drive firmware. Firmware updates are
available on the user support Web site.
Access the site, make sure that there is an
update for your firmware, and follow the
instructions on the screen to proceed with
download and installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Technical Support
Please consult the above sources before
calling with questions about using this
product, or with technical questions about
the drive or the supplied software. If using
telephone or e-mail support, please have the
following information available:
• Model number: DRX-820UL-T
• Serial number
• Date and place of purchase
• Computer maker and model number
• Computer specifications (CPU speed,
memory size, OS version, etc.)
• Writing software used (version, etc.)
Local technical support is only
available in the specified sales
regions. The customers in these
regions should be provided with a
warranty card for this product. For
contact information, refer to the
warranty card.
Note that technical support
conditions may vary according to
the locality, and that charges
and/or limited service may apply in
some regions.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|