Sony DVD Player model HTP 78SS User Manual

3-209-590-11(1)  
DVD Home  
Theatre System  
Operating Instructions  
HTP-78SS  
©2007 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About This Manual  
Note for the supplied remote  
• The instructions in this manual are for model  
HTP-78SS. Check your receiver’s model number  
by looking at the lower right corner of the front  
panel.  
(RM-AAU017)  
The VIDEO 3 button on the remote is not  
available for receiver operation.  
The HTP-78SS consists of:  
• Receiver  
STR-KS1100  
DVP-NS78H  
• DVD player  
• Speaker system  
a)  
– Front speakers  
– Center speaker  
– Surround speakers  
– Sub woofer  
SS-MSP1100  
SS-CNP1100  
SS-SRP1100  
SS-WP1100  
a)  
Be sure to use only the supplied speakers.  
• The instructions in this manual describe the  
controls on the supplied remote. You can also use  
the controls on the receiver if they have the same  
or similar names as those on the remote. For  
details on the use of your DVD player, refer to the  
operating instructions supplied with the DVD  
player.  
This receiver incorporates Dolby* Digital and Pro  
Logic Surround and the DTS** Digital Surround  
System.  
*
Manufactured under license from Dolby  
Laboratories.  
“Dolby”, “Pro Logic” and the double-D symbol  
are trademarks of Dolby Laboratories.  
**“DTS” and “DTS Digital Surround” are  
registered trademarks of DTS, Inc.  
This receiver incorporates High-Definition  
Multimedia Interface (HDMITM) technology.  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI Licensing LLC.  
3GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Table of Contents  
3: Connecting the audio/video  
Enjoying Dolby Digital and DTS Surround  
sound (AUTO FORMAT DIRECT)....... 37  
Using only the front speakers and sub  
woofer (2CH STEREO)......................... 41  
Resetting sound fields to the initial  
components.............................................14  
6: Calibrating the appropriate settings  
settings ................................................... 42  
(AUTO CALIBRATION).......................21  
7: Adjusting the speaker levels and  
balance (TEST TONE)...........................25  
Enjoying the DIGITAL MEDIA PORT  
(DMPORT) ............................................ 47  
Settings for the surround sound  
(SUR menu)............................................33  
Calibrating the appropriate settings  
automatically (A. CAL menu)................37  
4GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Description and location of parts  
Receiver  
Front panel  
1
2
3
4
5
MASTER VOLUME  
DMPORT  
VIDEO  
1
VIDEO 2/BD  
DVD  
SAT  
TV  
SA-CD/CD  
TUNER  
INPUT SELECTOR  
PRESET TUNING  
SOUND FIELD  
MUTING  
?/1  
AUTO CAL MIC  
q;  
9
8
7
6
Name  
Function  
Name  
Function  
A ?/1  
Press to turn the receiver  
on or off (page 20, 27, 28,  
42).  
G MUTING  
Press to mute the sound  
(on/standby)  
B Remote sensor  
C Input lamps  
H SOUND FIELD  
Press to select a sound  
field (page 37, 39, 41, 42).  
Receives signals from  
remote commander.  
+/–  
I PRESET TUNING Press to select a preset  
The lamp of the chosen  
input source lights up  
+/–  
J INPUT  
Press to select the input  
source to playback (page  
SELECTOR  
D Display  
The current status of the  
selected component or a  
list of selectable items  
appears here (page 6).  
E MASTER  
Turn to adjust the volume  
level of all speakers at the  
same time (page 25, 26,  
VOLUME  
F AUTO CAL MIC  
Connects to the supplied  
optimizer microphone for  
the Auto Calibration  
function (page 22).  
jack  
continued  
5GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
About the indicators on the display  
12  
3
4
5
6
7
SLEEP  
LFE  
SW  
DIGITAL  
DTS  
HDMI  
D.RANGE  
MEMORY RDS  
ST MONO  
L
C
S
R
PL  
SL  
SR  
OPT COAX  
qf  
qd  
Function  
qs qa q;  
9
8
Name  
Name  
Function  
A LFE  
Lights up when the disc being  
played back contains an LFE  
(Low Frequency Effect) channel  
and the LFE channel signal is  
actually being reproduced.  
F Preset  
Lights up when using the  
station  
indicators  
receiver to tune in radio stations  
you have preset. For details on  
presetting radio stations, see  
B SLEEP  
Lights up when the sleep timer is  
activated (page 49).  
G D.RANGE  
Lights up when dynamic range  
compression is activated (page  
C Playback  
channel  
The letters (L, C, R, etc.) indicate  
the channels being played back.  
The boxes around the letters vary  
to show how the receiver  
downmixes the source sound.  
Front Left  
H Tuner  
Lights up when using the  
receiver to tune in radio stations  
(page 42), etc.  
indicators  
indicators  
I MEMORY  
Lights up when a memory  
function, such as Preset Memory  
(page 44), etc., is activated.  
L
R
C
Front Right  
Center (monaural)  
SL  
SR  
S
Surround Left  
Surround Right  
J COAX  
K OPT  
Lights up when the DVD input is  
selected.  
Surround (monaural or the  
surround components obtained  
by Pro Logic processing)  
Example:  
Recording format (Front/  
Surround): 3/2.1  
Lights up when the VIDEO 2 or  
SAT input is selected.  
L ;PL(II)  
; PL” lights up when the  
receiver applies Pro Logic  
processing to 2 channel signals  
in order to output the center and  
surround channel signals.  
; PLII” lights up when the  
Pro Logic II Movie/Music  
decoder is activated.  
Sound Field: A.F.D. AUTO  
L
C
R
SW  
SL  
SR  
D ; DIGITAL Lights up when receiver is  
decoding Dolby Digital signals.  
Note  
M DTS  
Lights up when the receiver is  
decoding DTS signals.  
Note  
When playing a DTS format  
disc, be sure that you have made  
digital connections.  
When playing a Dolby Digital  
format disc, be sure that you  
have made digital connections.  
E HDMI  
Lights up when a playback  
component is connected to this  
receiver using a HDMI jack  
N SW  
Lights up when the audio signal  
is output from the  
SUBWOOFER jack.  
6GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Rear panel  
1
2
3
SPEAKERS  
AM  
HDMI  
DVD IN  
VIDEO 2/BD IN  
OUT  
DIGITAL  
L
L
R
R
OPT IN  
IN  
AUDIO IN AUDIO IN AUDIO IN  
SAT VIDOEPOT I2N/BD CDOAVXD  
FRONT  
R
FRONT  
L
SUR  
R
SUR  
L
CENTER SUBWOOFER  
ANTENNA  
SA-CD/CD  
TV  
VIDEO  
1
DMPORT  
4
A ANTENNA section  
C SPEAKERS section  
FM  
ANTENNA  
jack  
Connects to the FM  
wire antenna  
supplied with this  
receiver (page 19).  
Connects to speakers  
AM  
ANTENNA  
terminals  
Connects to the AM  
loop antenna  
supplied with this  
receiver (page 19).  
D AUDIO INPUT section  
AUDIO IN Connects to a Super  
White (L)  
Red (R)  
jack  
Audio CD player,  
CD player, etc. (page  
14, 15).  
B DIGITAL INPUT/OUTPUT section  
OPT IN jack Connects to a DVD  
player, etc. The  
COAX IN jack  
provides a better  
quality of loud sound  
COAX IN  
jack  
HDMI IN/  
OUT jack  
Connects to a DVD  
player or a Blu-ray  
disc player. An  
image and the sound  
are output to a TV or  
a projector (page 17).  
DMPORT  
jack  
Connect to a  
DIGITAL MEDIA  
PORT adapter (page  
47).  
7GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Name  
Function  
Remote commander  
A TV ?/1  
Press TV ?/1 and TV (M) at  
You can operate the receiver with the supplied  
remote. You can also use the remote to control  
the Sony audio/video components that the  
remote is assigned to operate (page 49).  
(on/standby) the same time to turn the TV on  
or off.  
AV ?/1  
Press to turn on or off the Sony  
(on/standby) audio/video components that  
the remote is assigned to  
operate.  
RM-AAU017  
If you press ?/1 (B) at the  
same time, it will turn off the  
receiver and other components  
(SYSTEM STANDBY).  
Note  
The function of the AV ?/1  
switch changes automatically  
each time you press the input  
buttons (C).  
1
TV INPUT  
SLEEP  
TV ?/1  
AV ?/1  
?/1  
DMPORT  
2
wa  
SYSTEM STANDBY  
VIDEO 1 VIDEO 2 VIDEO 3 DVD  
3
SAT  
2CH  
TV  
SA-CD/CD TUNER  
A.F.D.  
MOVIE  
MUSIC  
4
5
6
7
B ?/1  
Press to turn the receiver on or  
AMP MENU  
AUTO CAL  
(on/standby) off.  
1
4
7
2
5
3
6
9
To turn off all components,  
press ?/1 and AV ?/1 (A) at  
the same time (SYSTEM  
STANDBY).  
w;  
D.TUNING  
D.SKIP  
MEMORY DVD MENU  
ENTER  
8
>10/  
-
0/10  
8
9
ql  
qk  
qj  
C Input  
buttons  
Press one of the buttons to  
select the component you want  
to use. When you press any of  
the input buttons, the receiver  
turns on. The buttons are  
factory assigned to control Sony  
components as follows. You  
can change the button  
CLEAR  
FM MODE  
MUTING  
DISPLAY  
TOOLS  
q;  
F
f
TV VOL  
MASTER VOL  
G
g
qh  
qa  
qg  
qf  
RETURN/EXIT  
TV CH –  
MENU  
TV CH +  
assignment following the steps  
PRESET – REPLAY ADVANCE PRESET +  
.
<
<
>
TUNING –  
TUNING +  
m
H
X
M
qs  
TV  
Button  
Assigned Sony  
component  
x
qd  
VIDEO 1  
VIDEO 2  
VIDEO 3  
DVD  
VCR (VTR mode 3)  
VCR (VTR mode 2)  
Not assigned  
DVD player  
SAT  
Digital Satellite  
Receiver  
TV  
TV  
SA-CD/CD  
Super Audio CD/  
CD player  
TUNER  
Built-in tuner  
DMPORT  
DIGITAL MEDIA  
PORT adapter  
8GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Name  
Function  
Name  
Function  
D MOVIE  
Press to select sound fields  
(MOVIE).  
L TV CH +/–  
Press TV CH +/– and TV (M)  
at the same time to select  
preset TV channels.  
MUSIC  
Press to select sound fields  
(MUSIC).  
PRESET +/– Press to select  
– preset stations.  
– preset channels of the VCR  
or satellite tuner.  
A.F.D.  
2CH  
Press to select A.F.D. mode.  
Press to select 2CH STEREO  
mode.  
b)  
./>  
Press to skip a track of the CD  
player, DVD player or Blu-  
ray disc player.  
E AMP MENU  
Press to display the menu of  
the receiver. Then, use V, v,  
B, b and  
(P) to perform  
menu operations.  
<
REPLAY  
/
Press to replay the previous  
<
ADVANCE  
scene or fast forward the  
current scene of the VCR,  
DVD player or Blu-ray disc  
player.  
F AUTO CAL  
Press to activate the Auto  
Calibration function (page  
b)  
m/M  
Press to  
G D.TUNING  
D.SKIP  
Press to enter direct tuning  
mode.  
– search tracks in the forward/  
reverse direction of the  
DVD player.  
– start fast forward/rewind of  
the VCR, CD player or Blu-  
ray disc player.  
Press to skip a disc when  
using a multi-disc changer.  
H DVD MENU  
Press to display the menu of  
the DVD player on the TV  
screen. Then, use V, v, B, b  
TUNING +/–  
Press to scan a station.  
and  
(P) to perform menu  
a)b)  
H
Press to start playback of the  
VCR, CD player, DVD player  
or Blu-ray disc player.  
operations.  
FM MODE  
Press to select the FM  
monaural or stereo reception.  
b)  
X
Press to pause playback or  
recording of the VCR, CD  
player, DVD player or Blu-  
ray disc player. (Also starts  
recording with components in  
recording standby.)  
I ENTER  
Press to enter the value after  
selecting a channel, disc or  
track using the numeric  
buttons of the TV, VCR or  
satellite tuner.  
MEMORY  
Press to store a station.  
b)  
x
Press to stop playback of the  
VCR, CD player, DVD player  
or Blu-ray disc player.  
J MUTING  
Press to activate the muting  
function.  
Press MUTING and TV (M)  
at the same time to activate  
the TV’s muting function.  
M TV  
Press TV and the button you  
want at the same time to  
activate the buttons with  
orange printing.  
K TV VOL  
Press TV VOL +/– and TV  
(M) at the same time to adjust  
the TV volume level.  
a)  
+ /–  
N MENU  
Press to display the menu of  
the VCR, DVD player,  
satellite tuner or Blu-ray disc  
player on the TV screen.  
MASTER  
VOL + /–  
Press to adjust the volume  
level of all speakers at the  
same time.  
a)  
Press MENU and TV (M) at  
the same time to display the  
TV’s menu. Then, use V, v,  
B, b and  
(P) to perform  
menu operations.  
continued  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9GB  
Name  
Function  
Name  
Function  
x
O RETURN/  
Press to  
S >10/  
Press to select  
EXIT O  
– return to the previous menu.  
– exit the menu while the  
menu or on-screen guide of  
the VCR, DVD player,  
satellite tuner or Blu-ray  
disc player is displayed on  
the TV screen.  
Press RETURN/EXIT O  
and TV (M) at the same time  
to return to the previous menu  
or exit the TV’s menu while  
the menu is displayed on the  
TV screen.  
– track numbers over 10 of the  
VCR, satellite tuner or CD  
player.  
– channel numbers of the  
Digital CATV terminal.  
-/--  
Press -/-- and TV (M) at the  
same time to select the  
channel entry mode, either  
one or two digits of the TV.  
CLEAR  
Press to clear a mistake when  
you press the incorrect  
numeric button.  
P
After pressing AMP MENU  
(E), DVD MENU (H), or  
MENU (N), press V, v, B or  
b to select the settings. Then,  
press  
for DVD MENU or MENU.  
Press also to enter the  
selection of the receiver,  
VCR, satellite tuner, CD  
player, DVD player or Blu-  
ray disc player.  
T Numeric  
Press to  
– preset/tune to preset  
stations.  
,
buttons  
(number 5 )  
a)  
V/v/B/b  
Q DISPLAY  
R TOOLS  
– select track numbers of the  
CD player, DVD player or  
Blu-ray disc player. Press  
0/10 to select track number  
10.  
– select channel numbers of  
the VCR or satellite tuner.  
Press the numeric buttons and  
TV (M) at the same time to  
select the TV channels.  
to enter the selection  
Press to select information  
displayed on the TV screen of  
the VCR, satellite tuner, CD  
player, DVD player or Blu-  
ray disc player.  
Press DISPLAY and TV (M)  
at the same time to select TV  
information displayed on the  
TV screen.  
U TV INPUT  
Press TV INPUT and TV (M)  
at the same time to select the  
input signal (TV input or  
video input).  
SLEEP  
Press to activate the Sleep  
Timer function and the  
duration which the receiver  
turns off automatically.  
Press to display options  
applicable to the entire disc  
(e.g. disc protection), recorder  
(e.g. audio settings during  
recording), or multiple items  
on a list menu (e.g. erasing  
multiple titles).  
Press TOOLS and TV (M) at  
the same time to display  
options applicable to the TV.  
a)  
The number 5, MASTER VOL +, TV VOL + and  
H buttons have tactile dots. Use the tactile dots  
as references when operating the receiver.  
This button is also available for DIGITAL MEDIA  
PORT adapter operation. For details on the  
function of the button, see the operating  
instructions supplied with the DIGITAL MEDIA  
PORT adapter.  
b)  
Notes  
• The VIDEO 3 button on the remote is not available  
for receiver operation.  
• Some functions explained in this section may not  
work depending on the model.  
• The above explanation is intended to serve as an  
example only. Therefore, depending on the  
component, the above operation may not be  
possible or may operate differently than described.  
10GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1: Installing speakers  
This receiver allows you to use a 5.1 channel  
speaker system. To fully enjoy theater-like  
multi channel surround sound requires five  
speakers (two front speakers, a center speaker,  
and two surround speakers) and a sub woofer  
(5.1 channel).  
Installing the speakers on a flat  
surface  
Before you install the speaker and sub woofer,  
be sure to attach the supplied foot pads to  
prevent vibration or movement as shown in the  
illustration below.  
Example of front speaker  
Installing the speakers on the  
speaker stand  
For greater flexibility in positioning the  
speakers, use the optional WS-FV11 or  
WS-FV10D speaker stand (available only in  
certain countries). Be sure to detach the screw  
from the speaker and use it when you install  
the speaker to the speaker stand. For details,  
refer to operating instructions supplied with  
the speaker stand.  
AFront speaker (Left)  
BFront speaker (Right)  
CCenter speaker  
DSurround speaker (Left)  
ESurround speaker (Right)  
FSub woofer  
Tip  
Since the sub woofer does not emit highly  
directional signals, you can place it wherever you  
want.  
11GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3 Hang the speakers on the  
Installing the speakers on the  
wall  
screws.  
Example of installing the speakers on  
the wall  
You can install your speakers on the wall.  
Hook on the back of the speaker  
1 Prepare screws (not supplied)  
that are suitable for the hook on  
the back of each speaker. See  
the illustrations below.  
4.5 mm  
4 mm  
more than 25 mm  
4.5 mm  
Notes  
Hook on the back of the speaker  
• Use screws that are suitable for the wall material  
and strength. As a plaster board wall is especially  
fragile, attach the screws securely to a beam and  
fasten them to the wall. Install the speakers on a  
vertical and flat wall where reinforcement is  
applied.  
2 Fasten the screws to the wall.  
The screws should protrude 5  
to 7 mm.  
• Contact a screw shop or installer regarding the  
wall material or screws to be used.  
• Sony is not responsible for accident or damage  
caused by improper installation, insufficient wall  
strength or improper screw installation, natural  
calamity, etc.  
5 to 7 mm  
12GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2: Connecting speakers  
B
A
F
A
A
SPEAKERS  
DVD IN  
VIDEO 2/BD IN  
OUT  
L
L
R
R
AUDIO IN AUDIO IN AUDIO IN  
SA-CD/CD VIDEO 1  
FRONT R FRONT L  
SUR R  
SUR L  
CENTER SUBWOOFER  
TV  
DMPORT  
A
A
A
E
D
C
ASpeaker cord (supplied)a)  
AFront speaker (Left)  
BFront speaker (Right)  
CCenter speaker  
DSurround speaker (Left)  
ESurround speaker (Right)  
FSub woofer  
Note on speakers  
To connect the speakers correctly, be sure to  
check the type of speakers by referring to the  
speaker label* at the rear panel or bottom of  
the speakers.  
Character on  
speaker label  
Speaker type  
a)  
L
Front left  
Use the long speaker cords to connect the surround  
speakers and the short speaker cords to connect the  
front and center speakers.  
R
Front right  
SL  
SR  
Surround left  
Surround right  
Note  
Do not connect/disconnect the speaker cords to/from  
SPEAKERS terminals while the receiver is turned  
on.  
* The center speaker and sub woofer do not have the  
character on the speaker label. For details on the  
speaker type, see page 3.  
13GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting audio components  
3: Connecting the audio/  
video components  
The following illustration shows how to  
connect audio components such as Super  
Audio CD player or CD player.  
How to hook up your  
components  
Super Audio CD player/  
CD player  
This section describes how to hook up your  
components to this receiver. Before you begin,  
for the pages which describe how to connect  
the audio/video components.  
Audio signal  
After hooking up all your components,  
19).  
A
Component to be connected  
To connect  
See  
Audio components  
• Super Audio CD player/  
CD player  
AM  
HDMI  
DVD IN  
VIDEO 2/BD  
Video components  
• DVD player/DVD recorder  
• Blu-ray disc player  
• Satellite tuner/Set-top box  
• VCR  
DIGITAL  
L
L
R
R
SAT VIDOEPOT I2N/BD CDOAVXDIN  
OPT IN  
AUDIO IN AUDIO IN  
SA-CD/CD  
ANTENNA  
TV  
• TV  
Components with HDMI jack  
AAudio cord (not supplied)  
14GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
If you connect a DVD recorder  
Be sure to change the factory setting of the  
DVD input button on the remote so that you  
can use the button to control your DVD  
recorder. For details, see “Changing button  
Connecting video components  
The following illustration shows how to  
connect video components such as DVD  
player, DVD recorder, satellite tuner or VCR.  
Satellite tuner/Set-top box  
Audio signal  
Blu-ray disc player  
TV  
Audio signal  
Audio signal  
A
A
B
SPEAKERS  
AM  
HDMI  
DVD IN  
VIDEO 2/BD IN  
OUT  
DIGITAL  
L
L
R
R
OPT IN  
AUDIO IN AUDIO IN AUDIO IN  
SAT VIDOEPOT I2N/BD CDOAVXDIN  
FRONT R FRONT L  
SUR R  
SUR L  
ANTENNA  
SA-CD/CD  
TV  
VIDEO 1  
DMPORT  
C
B
Audio signal  
Audio signal  
VCR  
DVD player/DVD recorder  
AOptical digital cord (not supplied)  
BAudio cord (not supplied)  
CCoaxial digital cord (supplied)  
continued  
15GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Notes  
• You cannot do recording on the DVD recorder or  
VCR via this receiver. For details, refer to the  
operating instructions supplied with the DVD  
recorder or VCR.  
• To input multi channel digital audio from the DVD  
player, set the digital audio output setting on the  
DVD player. Refer to the operating instructions  
supplied with the DVD player.  
• As this receiver does not have analog audio input  
jack for DVD, connect your DVD player to the  
DIGITAL DVD COAX IN jack on the receiver.  
To output sound from the front left/right speakers  
only, press 2CH.  
• When connecting optical digital cords, insert the  
plugs straight in until they click into place.  
• Do not bend or tie optical digital cords.  
Tips  
• All the digital audio jacks are compatible with  
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling  
frequencies.  
• To output the sound of the TV from the speakers  
connected to the receiver, be sure to:  
– connect the audio output jacks of the TV to the  
TV AUDIO IN jacks of the receiver.  
– turn off or mute the TV’s volume.  
16GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting components with  
HDMI jacks  
HDMI is the abbreviated name for High-  
Definition Multimedia Interface. It is an  
interface which transmits video and audio  
signals in digital format.  
DVD player  
Blu-ray disc player  
TV, projector, etc.  
Audio/video signal  
Audio signal  
Audio/video  
signal  
Audio signal  
Audio/video  
signal  
A
B
C
B
B
SPEAKERS  
AM  
HDMI  
DVD IN  
VIDEO 2/BD IN  
OUT  
DIGITAL  
L
L
R
R
OPT IN  
AUDIO IN AUDIO IN AUDIO IN  
SA-CD/CD VIDEO 1  
SAT VIDOEPOT I2N/BD CDOAVXDIN  
FRONT R FRONT L  
SUR R  
SUR L  
ANTENNA  
TV  
DMPORT  
ACoaxial digital cord (supplied)  
BHDMI cable (not supplied)  
We recommend that you use a Sony HDMI cable.  
COptical digital cord (not supplied)  
continued  
17GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Notes on HDMI connections  
• The sound is output from the TV speaker  
only when a playback component and this  
receiver, as well as this receiver and the TV  
are connected via the HDMI jack. To output  
the sound from the supplied speakers and to  
take advantage of the multi channel surround  
sound, be sure to  
– connect the digital audio jacks on the  
playback component to the receiver.  
– turn off or mute the TV’s volume.  
• The receiver does not support HDMI  
CONTROL function.  
• This receiver may not be able to transfer  
video or audio signals with certain types of  
components.  
• The multi/stereo area audio signals of a  
Super Audio CD are not output.  
• Audio signals (sampling frequency, bit  
length, etc.) transmitted from a HDMI jack  
may be restricted by the connected  
component. If the image is poor or no sound  
is output from the component connected via  
the HDMI cable, check the setup of the  
connected component.  
• Be sure to turn on the receiver, when video  
and audio signals of a playback component  
are being output to a TV through HDMI  
jacks of the receiver. Unless the power is on,  
neither video nor audio signals will be  
transmitted.  
• For details on HDMI setup of the connected  
component, refer to operating instructions  
supplied with the connected component.  
Notes  
• When connecting optical digital cords, insert the  
plugs straight in until they click into place.  
• Do not bend or tie optical digital cords.  
• Be sure to change the factory setting of the VIDEO  
2 input button on the remote so that you can use the  
button to control your Blu-ray disc player. For  
49).  
Tip  
All the digital audio jacks are compatible with  
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling  
frequencies.  
18GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4: Connecting the antennas  
Connect the supplied AM loop antenna and  
FM wire antenna.  
FM wire antenna (supplied)  
AM loop antenna (supplied)  
SPEAKERS  
AM  
HDMI  
DVD IN  
VIDEO 2/BD IN  
OUT  
DIGITAL  
L
L
R
R
OPT IN  
AUDIO IN AUDIO IN AUDIO IN  
SA-CD/CD VIDEO 1  
SAT VIDOEPOT I2N/BD CDOAVXDIN  
FRONT R FRONT L  
SUR R  
SUR L  
ANTENNA  
TV  
DMPORT  
Notes  
• To prevent noise pickup, keep the AM loop  
antenna away from the receiver and other  
components.  
• Be sure to fully extend the FM wire antenna.  
• After connecting the FM wire antenna, keep it as  
horizontal as possible.  
19GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Performing initial setup  
operations  
5: Preparing the receiver  
and the remote  
Before using the receiver for the first time,  
initialize the receiver by performing the  
following procedure. This procedure can also  
be used to return settings you have made to  
their factory defaults.  
Connecting the AC power cord  
Connect the AC power cord to a wall outlet.  
Be sure to use the buttons on the receiver for  
this operation.  
AC power cord  
1,2  
MASTER VOLUME  
DMPORT  
VIDEO  
1
VIDEO 2/BD  
DVD  
SAT  
TV  
SA-CD/CD  
TUNER  
INPUT SELECTOR  
PRESET TUNING  
SOUND FIELD  
MUTING  
AUTO CAL MIC  
1 Press ?/1 to turn off the  
receiver.  
2 Hold down ?/1 for 5 seconds.  
To the wall outlet  
“INITIAL” appears on the display.  
The following items are reset to their  
factory settings.  
• All settings in the LEVEL, TONE,  
SUR, TUNER, AUDIO and SYSTEM  
menus.  
• The sound field memorized for each  
input and preset station.  
• All sound field parameters.  
• All preset stations.  
• MASTER VOLUME is set to “VOL  
MIN”.  
• Input is set to “DVD”.  
20GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Inserting batteries into the  
remote  
6: Calibrating the  
appropriate settings  
automatically  
Insert two R6 (size-AA) batteries in the  
RM-AAU017 remote commander.  
Observe the correct polarity when installing  
batteries.  
(AUTO CALIBRATION)  
This receiver is equipped with D.C.A.C.  
(Digital Cinema Auto Calibration)  
Technology which allows you to perform  
automatic calibration as follows:  
• Check the connection between each speaker  
and the receiver.  
• Adjust the speaker level.  
• Measure the distance of each speaker to your  
listening position.  
You can also adjust the speaker levels and  
balance manually. For details, see  
Notes  
• Do not leave the remote in an extremely hot or  
humid place.  
• Do not use a new battery with old ones.  
• Do not mix alkaline batteries and other kinds of  
batteries.  
• Do not expose the remote sensor to direct sunlight  
or lighting apparatuses. Doing so may cause a  
malfunction.  
Before you perform Auto  
Calibration  
• If you do not intend to use the remote for an  
extended period of time, remove the batteries to  
avoid possible damage from battery leakage and  
corrosion.  
• When you replace the batteries, the remote buttons  
may be reset to their factory settings. If this  
happens, reassign the buttons again (page 49).  
Before you perform Auto Calibration, install  
and connect the speakers (page 11, 13).  
• The AUTO CAL MIC jack is used for the  
supplied optimizer microphone only. Do not  
connect other microphones to this jack.  
Doing so may damage the receiver and the  
microphone.  
• During calibration, the sound that comes out  
of the speakers is very loud. Pay attention to  
the presence of children or to the effect on  
your neighborhood.  
Tip  
Under normal conditions, the batteries should last  
for about 3 months. When the remote no longer  
operates the receiver, replace all the batteries with  
new ones.  
• Perform Auto Calibration in a quiet  
environment to avoid the effect of noise and  
to get a more accurate measurement.  
• If there are any obstacles in the path between  
the optimizer microphone and the speakers,  
the calibration cannot be performed  
correctly. Remove any obstacles from the  
measurement area to avoid measurement  
error.  
continued  
21GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Note  
Performing Auto Calibration  
If the Muting function is on when you perform Auto  
Calibration, it will turn off automatically.  
Example  
TV INPUT  
SLEEP  
TV ?/1  
AV ?/1  
?/1  
DMPORT  
Optimizer  
?/1  
switch  
MASTER VOLUME  
DMPORT  
VIDEO  
1
VIDEO 2/BD  
DVD  
SAT  
TV  
SA-CD/CD  
TUNER  
INPUT SELECTOR  
PRESET TUNING  
SOUND FIELD  
MUTING  
?/1  
microphone  
AUTO CAL MIC  
SYSTEM STANDBY  
VIDEO 1 VIDEO 2 VIDEO 3 DVD  
Input  
buttons  
SAT  
2CH  
TV  
SA-CD/CD TUNER  
A.F.D.  
MOVIE  
MUSIC  
AMP MENU  
AUTO CAL  
1
4
7
2
5
3
6
9
AMP MENU  
AUTO CAL  
D.TUNING  
D.SKIP  
MEMORY DVD MENU  
ENTER  
8
>10/  
-
0/10  
CLEAR  
FM MODE  
MUTING  
DISPLAY  
TOOLS  
MUTING  
F
f
TV VOL  
MASTER VOL  
G
g
MASTER  
VOL +/–  
RETURN/EXIT  
MENU  
Press AMP MENU, then press  
AUTO CAL.  
The following appears on the display.  
A.CAL [5] t A.CAL [4] t A.CAL [3] t  
A.CAL [2] t A.CAL [1]  
The measurement process will take a few  
minutes to complete.  
1 Connect the supplied optimizer  
microphone to the AUTO CAL  
MIC jack on the front panel.  
2 Set up the optimizer  
The table below shows the display when  
measurement starts.  
microphone.  
Place the optimizer microphone at your  
listening position.You can also use a stool  
or tripod so that the optimizer  
microphone remains at the same height as  
your ears.  
Measurement for  
Environment noise level  
Speaker connection  
Display  
NOISE.CHK  
MEASURE and SP  
DET. appears  
alternately*  
Speaker level  
MEASURE and  
GAIN appears  
alternately*  
Speaker distance  
MEASURE and  
DISTANCE appears  
alternately*  
* The corresponding speaker indicator lights up in  
the display during measurement.  
22GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
When measurement ends, “COMPLETE”  
appears on the display and the settings are  
registered.  
To rectify the error  
1 Record down the error code.  
2 Press  
.
3 Press ?/1 to turn off the receiver.  
4 Rectify the error.  
below.  
5 Turn on the receiver and perform Auto  
Calibration again (page 22).  
After you have finished  
Disconnect the optimizer microphone from the  
receiver.  
Note  
Auto Calibration cannot detect the sub woofer.  
Therefore, all sub woofer settings will be  
maintained.  
Error code and remedies  
Error  
code  
Explanation  
Remedies  
Tips  
• When Auto Calibration starts:  
– Stand some distance from the speakers and the  
listening position to avoid measurement failure.  
This is because test signals are output from the  
speakers during measurement.  
ERROR 10 The environment Make sure the  
is too noisy.  
environment is  
quiet during Auto  
Calibration.  
– Avoid making noise to get a more accurate  
measurement.  
ERROR 11 The speakers are Placeyourspeakers  
placed too near further away from  
• The Auto Calibration function will be canceled  
when you do the following during the  
measurement process:  
the optimizer  
microphone.  
the optimizer  
microphone.  
ERROR 12 None of the  
speakers are  
Make sure that the  
optimizer  
– Press ?/1 or MUTING.  
– Press input buttons on the remote or INPUT  
SELECTOR on the receiver.  
– Change the volume level.  
detected.  
microphone is  
connected properly  
and perform Auto  
Calibration.  
– Press AUTO CAL again.  
ERROR 20 Front speakers  
Check the front  
are not detected speaker  
or only one front connection.  
speaker is  
Error and warning codes  
detected.  
Error codes  
ERROR 21 Only one  
surround speaker speaker  
is detected. connection.  
Check the surround  
When an error is detected during Auto  
Calibration, an error code will appear on the  
display cyclically after each measurement  
process as follows:  
Error code tblank display t(error code t  
a)  
blank display) t PUSH t blank display  
t ENTER  
a)  
Appears when there are more than one error code.  
continued  
23GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Warning codes  
Warning codes and solutions  
During Auto Calibration, the warning code  
provides information on the measurement  
result. The warning code will appear on the  
display cyclically as follows:  
Warning Explanation  
code  
Solution  
WARN. 40 The environment Make sure the  
is noisy.  
environment is  
quiet during Auto  
Calibration.  
Warning code t blank display t (warning  
b)  
code t blank display) t PUSH t blank  
WARN. 50 The center speaker Be sure to connect  
is not connected. the center speaker.  
display t ENTER  
b)  
Appears when there are more than one warning  
WARN. 51 The surround  
Be sure to connect  
speakers.  
code.  
speakers are not the surround  
connected.  
You can choose to ignore the warning code as  
the Auto Calibration function will  
automatically adjust the settings. You can also  
change the settings manually.  
WARN. 60 The front speaker Reposition your  
c)  
balance is out of front speakers.  
range.  
WARN. 62 The center speaker Reposition your  
d)  
level is out of  
range.  
center speaker.  
To change the settings  
manually  
WARN. 63 The surround left Reposition your  
speaker levelis out surround left  
of range.  
1 Record down the warning code.  
e)  
speaker.  
2 Press  
.
WARN. 64 The surround right Reposition your  
3 Press ?/1 to turn off the receiver.  
4 Follow the solution provided in the  
5 Turn on the receiver and perform Auto  
Calibration again (page 22).  
speaker levelis out surround right  
of range.  
f)  
speaker.  
WARN. 70 The front speaker Reposition your  
c)  
distance is out of front speakers.  
range.  
WARN. 72 The center speaker Reposition your  
d)  
distance is out of center speaker.  
range.  
WARN. 73 The surround left Reposition your  
speaker distance is surround left  
e)  
out of range.  
speaker.  
WARN. 74 The surround right Reposition your  
speaker distance is surround right  
f)  
out of range.  
speaker.  
c)  
d)  
e)  
f)  
For details, refer “Front speakers distance”  
For details, refer “Center speaker distance”  
For details, refer “Surround left speaker distance”  
For details, refer “Surround right speaker  
24GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5 Press V/v repeatedly to select  
“T. TONE Y”.  
7: Adjusting the speaker  
levels and balance  
(TEST TONE)  
The test tone is output from each speaker  
in sequence as follows:  
Front left t Center t Front right t  
Surround right t Surround left t  
Sub woofer  
You can adjust the speaker levels and balance  
while listening to the test tone from your  
listening position.  
6 Adjust the speaker levels and  
balance using the LEVEL menu  
so that the level of the test tone  
sounds the same from each  
speaker.  
Tip  
The receiver employs a test tone with a frequency  
centered at 800 Hz.  
2CH  
A.F.D.  
MOVIE  
MUSIC  
AMP MENU  
AUTO CAL  
1
4
7
2
5
3
6
9
1
Tips  
• To adjust the level of all speakers at the same  
time, press MASTER VOL +/–. You can also  
use MASTER VOLUME on the receiver.  
• The adjusted value are shown on the display  
during adjustment.  
D.TUNING  
D.SKIP  
8
MEMORY DVD MENU  
ENTER  
>10/  
-
0/10  
CLEAR  
FM MODE  
MUTING  
DISPLAY  
TOOLS  
F
f
TV VOL  
MASTER VOL  
To turn off the test tone  
Repeat steps 1 to 5 above. Then, select  
“T. TONE N” in step 5.  
G
g
2-5  
MASTER  
VOL +/–  
RETURN/EXIT  
TV CH –  
MENU  
TV CH +  
PRESET – REPLAY ADVANCE PRESET +  
.
<
<
>
1 Press AMP MENU.  
“1-LEVEL” appears on the display.  
2 Press  
or b to enter the  
menu.  
3 Press V/v repeatedly to select  
“T. TONE”.  
4 Press  
or b to enter the  
parameter.  
25GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Selected input Components that can  
[Display]  
be played back  
Playback  
DMPORT  
[DMPORT]  
DIGITAL MEDIA PORT  
adapter connected to  
DMPORT jack  
Selecting a component  
VIDEO 1  
[VIDEO 1]  
VCR, etc., connected to  
the VIDEO 1 jack  
TV INPUT  
SLEEP  
TV ?/1  
AV ?/1  
?/1  
DMPORT  
VIDEO 2  
[VIDEO 2/BD]  
Blu-ray disc player, etc.,  
connected to the VIDEO  
2/BD jack  
SYSTEM STANDBY  
VIDEO 1 VIDEO 2 VIDEO 3 DVD  
1
SAT  
2CH  
TV  
SA-CD/CD TUNER  
DVD  
[DVD]  
DVD player, etc.,  
connected to DVD jack  
A.F.D.  
MOVIE  
MUSIC  
SAT  
[SAT]  
Satellite tuner, set-top  
box, etc., connected to  
SAT jack  
AMP MENU  
AUTO CAL  
1
4
7
2
5
3
6
9
TV  
[TV]  
TV, etc., connected to TV  
jack  
D.TUNING  
D.SKIP  
8
MEMORY DVD MENU  
ENTER  
>10/  
-
0/10  
SA-CD/CD  
[SA-CD/CD]  
Super Audio CD/CD  
player, etc., connected to  
the SA-CD/CD jack  
CLEAR  
FM MODE  
MUTING  
DISPLAY  
TOOLS  
MUTING  
F
f
TV VOL  
MASTER VOL  
TUNER  
[FM or AM band]  
Built-in radio tuner  
G
g
3
2 Turn on the component and  
RETURN/EXIT  
TV CH –  
MENU  
TV CH +  
start playback.  
PRESET – REPLAY ADVANCE PRESET +  
.
<
<
>
3 Press MASTER VOL +/– to  
adjust the volume.  
1 Press the input button to select  
You can also use MASTER VOLUME on  
the receiver.  
a component.  
You can also use INPUT SELECTOR on  
the receiver.  
The selected input appears on the display.  
To mute the sound  
Press MUTING.  
The muting function will be canceled when  
you do the following.  
• Press MUTING again.  
• Increase the volume.  
• Turn off the receiver.  
To avoid damaging your  
speakers  
Before you turn off the receiver, be sure to turn  
down the volume level.  
26GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Listening/Watching a component  
Listening to a Super Audio CD/CD  
TV INPUT  
SLEEP  
TV ?/1  
AV ?/1  
?/1  
DMPORT  
SYSTEM STANDBY  
VIDEO DVD  
2
3
5
VIDEO  
SAT  
1
VIDEO  
TV  
2
3
SA-CD/CD TUNER  
2CH  
A.F.D.  
MOVIE  
MUSIC  
MASTER VOLUME  
DMPORT  
VIDEO  
1
VIDEO 2/BD  
DVD  
SAT  
TV  
SA-CD/CD  
TUNER  
AMP MENU  
AUTO CAL  
1
4
7
2
5
3
6
9
INPUT SELECTOR  
PRESET TUNING  
SOUND FIELD  
MUTING  
?/
AUTO CAL MIC  
D.TUNING  
D.SKIP  
MEMORY DVD MENU  
ENTER  
8
>10/  
-
0/10  
CLEAR  
FM MODE  
DISPLAY  
TOOLS MUTING  
F
f
TV VOL  
MASTER VOL  
G
g
5
RETURN/EXIT  
MENU  
TV CH  
TV CH  
+
3
PRESET  
.
REPLAY ADVANCE PRESET  
<
+
<
>
TUNING  
TUNING  
+
m
H
X
M
TV  
x
Notes  
1 Turn on the Super Audio CD player/CD  
• The operation is described for a  
Sony Super Audio CD player.  
• Refer to the operating  
instructions supplied with the  
Super Audio CD player or CD  
player.  
player, then place the disc on the tray.  
2 Turn on the receiver.  
3 Press SA-CD/CD.  
You can also use INPUT SELECTOR on the receiver to  
select “SA-CD/CD”.  
Tips  
• You can select the sound field to  
suit the music. Refer to page 39  
for details.  
Recommended sound fields:  
Classical: HALL  
4 Playback the disc.  
5 Adjust to a suitable volume.  
6 After you have finished listening to the  
Super Audio CD/CD, eject the disc and turn  
off the receiver and Super Audio CD player/  
CD player.  
Jazz: JAZZ  
Live concert: CONCERT  
• You can listen to the sound that  
was recorded in the 2 channel  
format from all speakers (multi  
channel). Refer to page 37 for  
details.  
27GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Watching a DVD  
TV INPUT  
SLEEP  
TV ?/1  
AV ?/1  
?/1  
DMPORT  
2
3
7
SYSTEM STANDBY  
VIDEO DVD  
VIDEO  
SAT  
1
VIDEO  
TV  
2
3
SA-CD/CD TUNER  
2CH  
A.F.D.  
MOVIE  
MUSIC  
MASTER VOLUME  
DMPORT  
VIDEO  
1
VIDEO 2/BD  
DVD  
SAT  
TV  
SA-CD/CD  
TUNER  
AMP MENU  
AUTO CAL  
1
4
7
2
5
3
6
9
INPUT SELECTOR  
PRESET TUNING  
SOUND FIELD  
MUTING  
?/
AUTO CAL MIC  
D.TUNING  
D.SKIP  
MEMORY DVD MENU  
ENTER  
8
>10/  
-
0/10  
CLEAR  
FM MODE  
DISPLAY  
TOOLS MUTING  
F
f
TV VOL  
MASTER VOL  
G
g
7
RETURN/EXIT  
MENU  
TV CH  
TV CH  
+
3
PRESET  
.
REPLAY ADVANCE PRESET  
<
+
<
>
TUNING  
TUNING  
+
m
H
X
M
TV  
x
Notes  
• Refer to the operating  
1 Turn on the TV and DVD player.  
2 Turn on the receiver.  
3 Press DVD.  
instructions supplied with the  
TV and DVD player.  
• Check the following if you  
cannot listen to multi channel  
sound.  
– Be sure this receiver is  
connected to the DVD player  
via a digital connection.  
– Be sure the digital audio  
output of the DVD player is  
set up properly.  
You can also use INPUT SELECTOR on this receiver to  
select “DVD”.  
4 Switch the input of the TV so that an image  
of the DVD is displayed.  
If you connect the DVD player and receiver using other  
than HDMI connection, be sure that the video output of the  
DVD player is connected to the TV.  
Tips  
• Select the audio format of the  
disc to be played, if necessary.  
• You can select the sound field to  
suit the movie/music. Refer to  
page 39 for details.  
Recommended sound fields:  
Movie: C.ST.EX  
Music: CONCERT  
5 Set up the DVD player.  
Refer to “Quick Setup Guide” supplied with the receiver.  
6 Playback the disc.  
7 Adjust to a suitable volume.  
8 After you have finished watching the DVD,  
eject the disc and turn off the receiver, TV  
and DVD player.  
28GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To return to the previous  
display  
Press B.  
Amplifier Operations  
Navigating through  
menus  
By using the amplifier menus, you can make  
various adjustments to customize the receiver.  
To exit the menu  
Press AMP MENU.  
Note  
Some parameters and settings may appear dimmed  
on the display. This means that they are either  
unavailable or fixed and unchangeable.  
2CH  
A.F.D.  
MOVIE  
MUSIC  
AMP MENU  
AUTO CAL  
1
4
7
2
5
3
6
9
1
D.TUNING  
D.SKIP  
MEMORY DVD MENU  
ENTER  
8
>10/  
-
0/10  
CLEAR  
FM MODE  
MUTING  
DISPLAY  
TOOLS  
F
f
TV VOL  
MASTER VOL  
G
g
2-6  
RETURN/EXIT  
TV CH –  
MENU  
TV CH +  
PRESET – REPLAY ADVANCE PRESET +  
.
<
<
>
1 Press AMP MENU.  
“1-LEVEL” appears on the display.  
2 Press V/v repeatedly to select  
the menu you want.  
3 Press  
or b to enter the  
menu.  
4 Press V/v repeatedly to select  
the parameter you want to  
adjust.  
5 Press  
or b to enter the  
parameter.  
6 Press V/v repeatedly to select  
the setting you want.  
The setting is entered automatically.  
29GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Overview of the menus  
The following options are available in each  
menu. For details on navigating through  
menus, see page 29.  
Menu  
[Display]  
Parameters  
[Display]  
Settings  
Initial setting  
a)  
LEVEL  
Test tone  
T. TONE Y, T. TONE N  
T. TONE N  
[1-LEVEL]  
[T. TONE]  
a)  
Front speaker balance  
[FRT BAL]  
BAL. L +1 to BAL. L +8, BALANCE, BALANCE  
BAL. R +1 to BAL. R +8  
Center speaker level  
[CNT LVL]  
CNT –10 dB to CNT +10 dB  
(1 dB step)  
CNT 0 dB  
SUR L 0 dB  
SUR R 0 dB  
SW 0 dB  
Surround left speaker level  
[SL LVL]  
SUR L –10 dB to SUR L +10 dB  
(1 dB step)  
Surround right speaker level  
[SR LVL]  
SUR R –10 dB to SUR R +10 dB  
(1 dB step)  
Sub woofer level  
[SW LVL]  
SW –10 dB to SW +10 dB  
(1 dB step)  
a)  
Dynamic range compressor  
[D. RANGE]  
COMP. OFF, COMP. STD,  
COMP. MAX  
COMP. OFF  
BASS 0 dB  
TRE 0 dB  
TONE  
[2-TONE]  
Front speaker bass level  
[BASS LVL]  
BASS –6 dB to BASS +6 dB  
(1 dB step)  
Front speaker treble level  
[TRE LVL]  
TRE –6 dB to TRE +6 dB  
(1 dB step)  
a)  
SUR  
[3-SUR]  
Sound field selection  
[S.F. SELCT]  
2CH ST., A.F.D. AUTO, DOLBY PL, A.F.D. AUTO  
PLII MV, PLII MS, MULTI ST.,  
C.ST.EX A, C.ST.EX B, C.ST.EX C,  
PORTABLE, HALL, JAZZ,  
CONCERT  
a)b)  
Effect level  
[EFFECT]  
EFCT. MIN, EFCT. STD,  
EFCT. MAX  
EFCT. STD  
FM AUTO  
a)  
TUNER  
[4-TUNER]  
FM station receiving mode  
[FM MODE]  
FM AUTO, FM MONO  
AUDIO  
[5-AUDIO]  
Digital audio input decoding  
priority  
[DEC. PRI.]  
DEC. AUTO, DEC. PCM  
DEC. AUTO  
for:  
VIDEO 2,  
SAT;  
a)  
DEC. PCM for:  
DVD  
Digital broadcast language  
selection  
DUAL M/S, DUAL M, DUAL S,  
DUAL M+S  
DUAL M  
a)  
[DUAL]  
Synchronizes audio with video A.V.SYNC. Y, A.V.SYNC. N  
output  
A.V.SYNC. N  
a)  
[A.V. SYNC.]  
30GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Menu  
[Display]  
Parameters  
[Display]  
Settings  
Initial setting  
DIST. 3.0 m  
DIST. 3.0 m  
a)  
a)  
SYSTEM  
[6-SYSTEM]  
Front speakers distance  
[FRT DIST.]  
DIST. 1.0 m to DIST. 7.0 m  
(0.1 m step)  
Center speaker distance  
[CNT DIST.]  
DIST. xx m  
between front speaker distance and  
1.5 m (0.1 m step)  
a)  
Surround left speaker distance DIST. xx m  
[SL DIST.] between front speaker distance and  
4.5 m (0.1 m step)  
DIST. 3.0 m  
DIST. 3.0 m  
a)  
Surround right speaker distance DIST. xx m  
[SR DIST.]  
between front speaker distance and  
4.5 m (0.1 m step)  
a)  
Surround speaker placement  
[SUR PL.]  
PL. LOW, PL. HIGH  
PL. LOW  
a)  
A. CAL  
Auto calibration  
A.CAL YES, A.CAL NO  
A.CAL NO  
[7 - A. CAL]  
[AUTO CAL]  
a)  
For details, refer to the page in the parentheses.  
The surround effect is not available for “PORTABLE” sound field.  
b)  
31GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x D. RANGE (Dynamic range  
compressor)  
Adjusting the level  
Lets you compress the dynamic range of the  
sound track. This may be useful when you  
want to watch movies at low volumes late at  
night. Dynamic range compression is possible  
with Dolby Digital sources only.  
• COMP. OFF  
(LEVEL menu)  
You can use the LEVEL menu to adjust the  
balance and level of each speaker. These  
settings are applied to all sound fields.  
Select “1-LEVEL” in the amplifier menus. For  
details on adjusting the parameters, see  
The dynamic range is not compressed.  
• COMP. STD  
The dynamic range is compressed as  
intended by the recording engineer.  
• COMP. MAX  
The dynamic range is compressed  
dramatically.  
LEVEL menu parameters  
x T. TONE (Test tone)  
Tip  
Lets you adjust the speaker levels and balance  
while listening to the test tone from your  
listening position. For details, see “7:  
Dynamic range compressor lets you compress the  
dynamic range of the soundtrack based on the  
dynamic range information included in the Dolby  
Digital signal.  
“COMP. STD” is the standard setting, but it only  
enacts light compression. Therefore, we recommend  
using the “COMP. MAX” setting. This greatly  
compresses the dynamic range and lets you view  
movies late at night at low volumes. Unlike analog  
limiters, the levels are predetermined and provide a  
very natural compression.  
x FRT BAL (Front speaker  
balance)  
Lets you adjust the balance between front left  
and right speakers.  
x CNT LVL (Center speaker level)  
x SL LVL (Surround left speaker  
level)  
x SR LVL (Surround right speaker  
level)  
x SW LVL (Sub woofer level)  
32GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting the tone  
Settings for the surround  
sound  
(TONE menu)  
(SUR menu)  
You can use the TONE menu to adjust the  
tonal quality (bass/treble level) of the front  
speakers.  
Select “2-TONE” in the amplifier menus. For  
details on adjusting the parameters, see  
You can use the SUR menu to select the sound  
field you want for your listening pleasure.  
Select “3-SUR” in the amplifier menus. For  
details on adjusting the parameters, see  
TONE menu parameters  
SUR menu parameters  
x BASS LVL (Front speaker bass  
x S.F. SELCT (Sound field  
selection)  
level)  
Lets you select the sound field you want. For  
37).  
x TRE LVL (Front speaker treble  
level)  
Note  
The receiver lets you apply the last selected sound  
field to an input whenever it is selected (Sound Field  
Link). For example, if you select “HALL” for the  
SA-CD/CD input, then change to a different input  
and then return to SA-CD/CD, “HALL” will  
automatically be applied again.  
x EFFECT (Effect level)  
Lets you adjust the “presence” of the surround  
effect for sound fields selected with the  
MOVIE or MUSIC button. However, the  
surround effect is not available for  
“PORTABLE” sound field.  
• EFCT. MIN  
The surround effect is minimum.  
• EFCT. STD  
The surround effect is standard.  
• EFCT. MAX  
The surround effect is maximum.  
33GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Settings for the tuner  
(TUNER menu)  
Settings for the audio  
(AUDIO menu)  
You can use the TUNER menu to set the FM  
station receiving mode.  
Select “4-TUNER” in the amplifier menus.  
For details on adjusting the parameters, see  
You can use the AUDIO menu to make  
settings for the audio to suit your preference.  
Select “5-AUDIO” in the amplifier menus. For  
details on adjusting the parameters, see  
TUNER menu parameters  
AUDIO menu parameters  
x FM MODE (FM station receiving  
mode)  
x DEC. PRI. (Digital audio input  
decoding priority)  
Lets you specify the input mode for the digital  
signal input to the DIGITAL IN jacks.  
• DEC. AUTO  
Automatically switches the input mode  
between DTS, Dolby Digital, or PCM.  
• DEC. PCM  
PCM signals are given priority (to prevent  
interruption when playback starts).  
However, when other signals are input, there  
may be no sound depending on the format.  
In this case, set to “DEC. AUTO”.  
• FM AUTO  
This receiver will decode the signal as stereo  
signal when the radio station is broadcast in  
stereo.  
• FM MONO  
This receiver will decode the signal as mono  
signal regardless of the broadcast signal.  
Note  
When set to “DEC. AUTO” and the sound from the  
digital audio jacks (for a CD, etc.) is interrupted  
when playback starts, set to “DEC. PCM”.  
34GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
x DUAL (Digital broadcast  
language selection)  
Lets you select the language you want to listen  
to during digital broadcast. This feature only  
functions for Dolby Digital sources.  
• DUAL M/S (Main/Sub)  
Sound of the main language will be output  
through the front left speaker and sound of  
the sub language will be output through the  
front right speaker simultaneously.  
• DUAL M (Main)  
Settings for the system  
(SYSTEM menu)  
You can use the SYSTEM menu to set the  
distance of the speakers connected to this  
system.  
Select “6-SYSTEM” in the amplifier menus.  
For details on adjusting the parameters, see  
Sound of the main language will be output.  
• DUAL S (Sub)  
Sound of the sub language will be output.  
• DUAL M+S (Main + Sub)  
SYSTEM menu parameters  
Mixed sound of both the main and sub  
languages will be output.  
x FRT DIST. (Front speakers  
distance)  
Lets you set the distance from your listening  
position to the front speakers (A). If both  
front speakers are not placed an equal distance  
from your listening position, set the distance as  
the average distance between the front  
speakers.  
x A.V. SYNC. (Synchronizes audio  
with video output)  
• A.V.SYNC. Y (Yes) (Delay time: 68 ms)  
The audio output is delayed so that the time  
gap between the audio output and visual  
display is minimized.  
• A.V.SYNC. N (No) (Delay time: 0 ms)  
The audio output is not delayed.  
B
A
A
Notes  
30˚ 30˚  
• This parameter is useful when you use a large LCD  
100˚-120˚  
100˚-120˚  
or plasma monitor or a projector.  
• This parameter is valid only when you use a sound  
field selected with the 2CH or A.F.D. buttons.  
• This parameter is not valid when PCM 96 kHz or  
DTS 2048 signals are input.  
C
D
x CNT DIST. (Center speaker  
distance)  
Lets you set the distance from your listening  
position to the center speaker. Center speaker  
distance should be set from a distance equal to  
the front speaker distance (A) to a distance  
1.5 meters closer to your listening position  
(B).  
continued  
35GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
x SL DIST. (Surround left speaker  
distance)  
x SUR PL.  
(Surround speaker placement)  
Lets you specify the height of your surround  
speakers for proper implementation of the  
surround effects in the CINEMA STUDIO EX  
modes (page 40).  
Lets you set the distance from your listening  
position to the surround left speaker. Surround  
left speaker distance should be set from a  
distance equal to the front speaker distance (A  
on page 35) to a distance 4.5 meters closer to  
your listening position (C on page 35).  
x SR DIST. (Surround right  
speaker distance)  
Lets you set the distance from your listening  
position to the surround right speaker.  
Surround right speaker distance should be set  
from a distance equal to the front speaker  
distance (A on page 35) to a distance 4.5  
meters closer to your listening position (D on  
page 35).  
Tip  
• PL. LOW  
The receiver lets you to input the speaker position in  
terms of distance. However, it is not possible to set  
the center speaker further than the front speakers.  
Also, the center speaker cannot be set more than  
1.5 meter closer from the front speakers.  
Likewise, the surround speakers can not be set  
further away from the listening position than the  
front speakers. And they can be no more than  
4.5 meter closer. This is because incorrect speaker  
placement is not conducive to the enjoyment of  
surround sound.  
Select if the height of your surround  
speakers corresponds to section A.  
• PL. HIGH  
Select if the height of your surround  
speakers corresponds to section B.  
Please note that, setting the speaker distance closer  
than the actual location of the speakers will cause a  
delay in the output of the sound from that speaker. In  
other words, the speaker will sound like it is further  
away.  
For example, setting the center speaker distance  
1-2 meter closer than the actual speaker position will  
create a fairly realistic sensation of being “inside”  
the screen. If you cannot obtain a satisfactory  
surround effect because the surround speakers are  
too close, setting the surround speaker distance  
closer (shorter) than the actual distance will create a  
larger sound stage.  
Adjusting these parameter while listening to the  
sound often results in much better surround sound.  
Give it a try!  
36GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Calibrating the  
appropriate settings  
automatically  
(A. CAL menu)  
Enjoying Surround Sound  
Enjoying Dolby Digital  
and DTS Surround sound  
(AUTO FORMAT DIRECT)  
The Auto Format Direct (A.F.D.) mode allows  
you to listen to higher fidelity sound and select  
the decoding mode for listening to a 2 channel  
stereo sound as multi channel sound.  
VIDEO 1 VIDEO 2 VIDEO 3  
DVD  
SAT  
2CH  
TV  
SA-CD/CD TUNER  
A.F.D.  
MOVIE  
MUSIC  
A.F.D.  
AMP MENU  
1
2
3
Press A.F.D. repeatedly to select  
the sound field you want.  
You can also use SOUND FIELD +/– on the  
receiver.  
38).  
continued  
37GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Types of A.F.D. mode  
Decoding  
mode  
A.F.D. mode  
[Display]  
Multi channel  
audio after  
decoding  
Effect  
(Detecting  
automatically) [A.F.D. AUTO]  
A.F.D. AUTO  
(Detecting  
automatically)  
Presents the sound as it was recorded/  
encoded without adding any surround  
effects. However, this receiver will  
generate a low frequency signal for output  
to the sub woofer when there is no LFE  
signals.  
Dolby Pro Logic PRO LOGIC  
[DOLBY PL]  
4 channel  
Performs Dolby Pro Logic decoding. The  
source recorded in 2 channel format is  
decoded into 4.1 channels.  
Dolby Pro Logic PRO LOGIC II MOVIE 5 channel  
Performs Dolby Pro Logic II Movie mode  
decoding. This setting is ideal for movies  
encoded in Dolby Surround. In addition,  
this mode can reproduce sound in 5.1  
channel for watching videos of overdubbed  
or old movies.  
II  
[PLII MV]  
PRO LOGIC II MUSIC 5 channel  
[PLII MS]  
Performs Dolby Pro Logic II Music mode  
decoding. This setting is ideal for normal  
stereo sources such as CDs.  
(Multi Stereo) MULTI STEREO  
[MULTI ST.]  
(Multi Stereo)  
Outputs 2 channel left/right signals from  
all speakers.  
38GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting a pre-  
programmed sound field  
You can take advantage of surround sound  
simply by selecting one of the receiver’s pre-  
programmed sound fields. They bring the  
exciting and powerful sound of movie theaters  
and concert halls into your home.  
VIDEO 1 VIDEO 2 VIDEO 3  
DVD  
SAT  
2CH  
TV  
SA-CD/CD TUNER  
A.F.D.  
MOVIE  
MUSIC  
MUSIC  
MOVIE  
2CH  
AMP MENU  
AUTO CAL  
1
4
2
5
3
6
A.F.D.  
Press MOVIE repeatedly to select a  
sound field for movies or press  
MUSIC repeatedly to select a  
sound field for music.  
You can also use SOUND FIELD +/– on the  
receiver.  
continued  
39GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Types of sound field available  
Sound field  
for  
Sound field  
[Display]  
Effect  
Movie  
CINEMA STUDIO EX A  
DCS [C.ST.EX A]  
Reproduces the sound characteristics of the Sony Pictures  
Entertainment “Cary Grant Theater” cinema production  
studio. This is a standard mode, great for watching almost any  
type of movie.  
CINEMA STUDIO EX B  
DCS [C.ST.EX B]  
Reproduces the sound characteristics of the Sony Pictures  
Entertainment “Kim Novak Theater” cinema production  
studio. This mode is ideal for watching science-fiction or  
action movies with lots of sound effects.  
CINEMA STUDIO EX C  
DCS [C.ST.EX C]  
Reproduces the sound characteristics of the Sony Pictures  
Entertainment scoring stage. This mode is ideal for watching  
musicals or films where orchestra music is featured in the  
soundtrack.  
Music  
PORTABLE AUDIO  
[PORTABLE]  
Reproduces a clear enhanced sound image from your portable  
audio device. This mode is ideal for MP3 and other  
compressed music.  
HALL [HALL]  
Reproduces the acoustics of a classical concert hall.  
Reproduces the acoustics of a jazz club.  
JAZZ CLUB [JAZZ]  
LIVE CONCERT  
[CONCERT]  
Reproduces the acoustics of a 300-seat live house.  
About DCS (Digital Cinema  
Sound)  
About CINEMA STUDIO EX  
modes  
Sound fields with DCS mark use DCS  
technology.  
CINEMA STUDIO EX modes are suitable for  
watching motion picture DVDs (etc.), with  
multi channel surround effects. You can  
reproduce the sound characteristics of Sony  
Pictures Entertainment’s dubbing studio in  
your home.  
DCS is a unique sound reproduction  
technology for home theater developed by  
Sony, in cooperation with Sony Pictures  
Entertainment, for enjoying the exciting and  
powerful sound of movie theaters at home.  
The CINEMA STUDIO EX modes consist of  
With this “Digital Cinema Sound” developed  
by integrating a DSP (Digital signal processor)  
and measured data, the ideal sound field  
intended by film makers can be experienced at  
home.  
the following three elements.  
• Virtual Multi Dimension  
Creates 5 sets of virtual speakers from a  
single pair of actual surround speakers.  
• Screen Depth Matching  
Creates the sensation that the sound is  
coming from inside the screen like in  
theaters.  
• Cinema Studio Reverberation  
Reproduces the type of reverberation found  
in theaters.  
The CINEMA STUDIO EX modes integrate  
these three elements simultaneously.  
40GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Notes  
• The effects provided by the virtual speakers may  
cause increased noise in the playback signal.  
• When listening with sound fields that employ the  
virtual speakers, you will not be able to hear any  
sound coming directly from the surround speakers.  
• This function does not work for signals with a  
sampling frequency of more than 48 kHz.  
Using only the front  
speakers and sub woofer  
(2CH STEREO)  
In this mode, the receiver outputs the sound  
from the front left/right speakers and  
subwoofer only.  
Tip  
You can identify the encoding format of DVD  
When multi channel surround formats are  
input, the signals are downmixed to 2 channel  
with bass frequencies being output from the  
sub woofer.  
When standard 2 channel stereo sources are  
input, the receiver’s bass redirection circuitry  
will be activated. The front channel bass  
frequencies will be output from the sub  
woofer.  
software, etc., by looking at the logo on the package.  
: Dolby Digital discs  
: Dolby Surround  
encoded programs  
: DTS Digital Surround encoded  
programs  
To turn off the surround effect  
for movie/music  
Press 2CH to select “2CH ST.” or press A.F.D.  
repeatedly to select “A.F.D. AUTO”.  
VIDEO 1 VIDEO 2 VIDEO 3  
DVD  
SAT  
2CH  
TV  
SA-CD/CD TUNER  
A.F.D.  
MOVIE  
MUSIC  
2CH  
AMP MENU  
1
2
3
Press 2CH.  
You can also use SOUND FIELD +/– on the  
receiver.  
41GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Resetting sound fields to  
the initial settings  
Be sure to use the buttons on the receiver for  
this operation.  
Tuner Operations  
Listening to FM/AM radio  
You can listen to FM and AM broadcasts  
through the built-in tuner. Before operation,  
make sure you have connected the FM and  
AM antennas to the receiver (page 19).  
1,2  
?/
2
MASTER VOLUME  
DMPORT  
VIDEO  
1
VIDEO 2/BD  
DVD  
SAT  
TV  
SA-CD/CD  
TUNER  
INPUT SELECTOR  
PRESET TUNING  
SOUND FIELD  
MUTING  
AUTO CAL MIC  
Tip  
The tuning scale is:  
FM : 50 kHz  
AM : 9 kHz  
1 Press ?/1 to turn off the  
receiver.  
Automatic tuning  
2 While holding down SOUND  
FIELD +, press ?/1.  
SYSTEM STANDBY  
VIDEO 1 VIDEO 2 VIDEO 3  
DVD  
“S.F. CLR.” appears on the display and  
all sound fields are reset to their initial  
setting.  
SAT  
2CH  
TV  
SA-CD/CD TUNER  
1
A.F.D.  
MOVIE  
MUSIC  
AMP MENU  
AUTO CAL  
1
4
7
2
5
3
6
9
D.TUNING  
D.SKIP  
MEMORY DVD MENU  
ENTER  
8
>10/  
-
0/10  
FM MODE  
CLEAR  
FM MODE  
MUTING  
DISPLAY  
TOOLS  
F
f
TV VOL  
MASTER VOL  
G
g
RETURN/EXIT  
TV CH –  
MENU  
TV CH +  
PRESET – REPLAY ADVANCE PRESET +  
.
<
<
>
TUNING –  
TUNING +  
m
H
X
M
2
TV  
x
1 Press TUNER repeatedly to  
select the FM or AM band.  
You can also use INPUT SELECTOR on  
the receiver.  
42GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
2 Press TUNING + or TUNING –.  
Direct tuning  
Press TUNING + to scan from low to  
high; press TUNING – to scan from high  
to low.  
You can enter the frequency of a station  
directly by using the numeric buttons.  
The receiver stops scanning whenever a  
station is received.  
SYSTEM STANDBY  
VIDEO 1 VIDEO 2 VIDEO 3  
DVD  
SAT  
2CH  
TV  
SA-CD/CD TUNER  
1
In case of poor FM stereo  
reception  
A.F.D.  
MOVIE  
MUSIC  
AMP MENU  
AUTO CAL  
If the FM stereo reception is poor and “ST”  
flashes on the display, select monaural audio  
so that the sound will be less distorted.  
To select monaural audio, you can  
– press FM MODE repeatedly until the  
“MONO” indicator lights up on the display.  
– set “FM MODE” in TUNER menu to “FM  
1
4
7
2
5
3
6
9
3
D.TUNING  
D.SKIP  
MEMORY DVD MENU  
ENTER  
8
2
4
>10/  
-
0/10  
CLEAR  
FM MODE  
To return to stereo mode, you can  
– press FM MODE repeatedly until the  
“MONO” indicator on the display do not  
light up.  
– set “FM MODE” in TUNER menu to “FM  
1 Press TUNER repeatedly to  
select the FM or AM band.  
You can also use INPUT SELECTOR on  
the receiver.  
2 Press D.TUNING.  
3 Press the numeric buttons to  
enter the frequency.  
Example 1: FM 102.50 MHz  
Select 1 b 0 b 2 b 5 b 0  
Example 2: AM 1,350 kHz  
Select 1 b 3 b 5 b 0  
If you have tuned in an AM station, adjust  
the direction of the AM loop antenna for  
optimum reception.  
4 Press ENTER.  
If you cannot tune in a station  
Make sure you have entered the right  
frequency. If not, repeat steps 2 to 4. If you  
still cannot tune in a station, the frequency is  
not used in your area.  
43GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
4 Press the numeric buttons to  
select a preset number.  
Presetting radio stations  
You can preset up to 30 FM stations and 30  
AM stations. Then you can easily tune in the  
stations you often listen to.  
You can also press the PRESET + or  
PRESET – to select a preset number.  
If “MEMORY” goes out before you  
select the preset number, start again from  
step 3.  
Presetting radio stations  
5 Press ENTER.  
The station is stored as the selected preset  
number.  
VIDEO 1 VIDEO 2 VIDEO 3  
DVD  
If “MEMORY” goes out before you press  
ENTER, start again from step 3.  
SAT  
2CH  
TV  
SA-CD/CD TUNER  
1
A.F.D.  
MOVIE  
MUSIC  
6 Repeat steps 1 to 5 to preset  
AMP MENU  
AUTO CAL  
another station.  
1
4
7
2
5
3
6
9
4
D.TUNING  
D.SKIP  
MEMORY DVD MENU  
ENTER  
8
>10/  
-
0/10  
CLEAR  
FM MODE  
3,5  
MUTING  
DISPLAY  
TOOLS  
F
f
TV VOL  
MASTER VOL  
G
g
RETURN/EXIT  
TV CH –  
MENU  
TV CH +  
PRESET  
+/–  
PRESET – REPLAY ADVANCE PRESET +  
.
<
<
>
TUNING –  
TUNING +  
m
H
M
1 Press TUNER repeatedly to  
select the FM or AM band.  
You can also use INPUT SELECTOR on  
the receiver.  
2 Tune in the station that you  
want to preset using automatic  
tuning (page 42) or direct  
Switch the FM reception mode, if  
necessary (page 43).  
3 Press MEMORY.  
“MEMORY” lights up for a few seconds.  
Perform steps 4 and 5 before  
“MEMORY” goes out.  
44GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Tuning to preset stations  
Using the Radio Data  
System (RDS)  
This receiver also allows you to use RDS  
(Radio Data System), which enables radio  
stations to send additional information along  
with the regular program signal. You can  
display RDS information.  
SYSTEM STANDBY  
VIDEO 1 VIDEO 2 VIDEO 3  
DVD  
SAT  
2CH  
TV  
SA-CD/CD TUNER  
1
A.F.D.  
MOVIE  
MUSIC  
AMP MENU  
AUTO CAL  
1
4
7
2
5
3
6
9
Numeric  
buttons  
D.TUNING  
D.SKIP  
MEMORY DVD MENU  
ENTER  
Notes  
8
• RDS is operable only for FM stations.  
• Not all FM stations provide RDS service, nor do  
they provide the same type of services. If you are  
not familiar with the RDS services in your area,  
check with your local radio stations for details.  
>10/  
-
0/10  
CLEAR  
FM MODE  
ENTER  
MUTING  
DISPLAY  
TOOLS  
F
f
TV VOL  
MASTER VOL  
G
g
Receiving RDS broadcasts  
RETURN/EXIT  
TV CH –  
MENU  
TV CH +  
PRESET – REPLAY ADVANCE PRESET +  
Simply select a station on the FM  
band using direct tuning (page 43),  
automatic tuning (page 42), or  
preset tuning (page 45).  
2
.
<
<
>
TUNING –  
TUNING +  
m
H
M
1 Press TUNER repeatedly to  
When you tune in a station that provides RDS  
services, “RDS” lights up and the program  
service name appears on the display.  
select the FM or AM band.  
2 Press PRESET + or PRESET –  
repeatedly to select the preset  
station you want.  
Note  
RDS may not work properly if the station you tuned  
to is not transmitting the RDS signal properly or if  
the signal strength is weak.  
Each time you press the button, you can  
select a preset station as follows:  
01  
02  
03  
04  
05  
...  
27  
30  
29  
28  
You can also press the numeric buttons to  
select the preset station you want. Then,  
press ENTER to enter the selection.  
Using the controls on the  
receiver  
1 Press INPUT SELECTOR repeatedly to  
select the FM or AM band.  
2 Press PRESET TUNING + or PRESET  
TUNING – repeatedly to select the preset  
station you want.  
45GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Program type Description  
indication  
Displaying RDS information  
VARIED  
Other types of programs such as  
celebrity interviews, panel  
games, and comedy  
While receiving an RDS station,  
press DISPLAY repeatedly.  
Each time you press the button, RDS  
information on the display changes cyclically  
as follows:  
POP M  
Popular music programs  
Rock music programs  
Easy Listening  
ROCK M  
EASY M  
LIGHT M  
Program Service name t Frequency t  
a)  
Program Type indication t Radio Text  
Instrumental, vocal, and choral  
music  
b)  
indication t Current Time indication (in  
24-hour system mode) t Sound field  
currently applied t Volume level  
CLASSICS  
OTHER M  
Performances of major  
orchestras, chamber music,  
opera, etc.  
a)  
Type of program being broadcast (page 46).  
Text messages sent by the RDS station.  
b)  
Music that does not fit into any  
categories above, such as Rhythm  
& Blues and Reggae  
Notes  
• If there is an emergency announcement by  
government authorities, “ALARM” flashes in the  
display.  
• When the message consists of 9 characters or more,  
the message scrolls across the display.  
• If a station does not provide a particular RDS  
service, “NO XXXX” (such as “NO TEXT”)  
appears on the display.  
WEATHER  
FINANCE  
Weather information  
Stock market reports and trading,  
etc.  
CHILDREN  
SOCIAL  
Programs for children  
Programs about people and the  
things that affect them  
RELIGION  
PHONE IN  
Programs of religious content  
Programs where members of the  
public express their views by  
phone or in a public forum  
Description of program types  
Program type Description  
indication  
TRAVEL  
LEISURE  
Programs about travel. Not for  
announcements that are located  
by TP/TA.  
NEWS  
News programs  
AFFAIRS  
Topical programs that expand on  
current news  
Programs on recreational  
activities such as gardening,  
fishing, cooking, etc.  
INFO  
Programs offering information on  
a wide spectrum of subjects,  
including consumer affairs and  
medical advice  
JAZZ  
Jazz programs  
COUNTRY  
NATION M  
Country music programs  
Programs featuring the popular  
music of the country or region  
SPORT  
Sports programs  
EDUCATE  
Educational programs, such as  
“how-to” and advice programs  
OLDIES  
FOLK M  
Programs featuring oldies music  
Folk music programs  
DRAMA  
Radio plays and serials  
DOCUMENT Investigative features  
NONE Any programs not defined above  
CULTURE  
Programs about national or  
regional culture, such as language  
and social concerns  
SCIENCE  
Programs about the natural  
sciences and technology  
46GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the DIGITAL MEDIA  
PORT adapter  
Other Operations  
You can listen to the sound from the  
component connected through the DIGITAL  
MEDIA PORT adapter to the DMPORT jack  
on the receiver.  
You can also view the images on the TV  
screen by connecting the video output of the  
DIGITAL MEDIA PORT adapter to the video  
input of the TV.  
Enjoying the DIGITAL  
MEDIA PORT  
(DMPORT)  
The DIGITAL MEDIA PORT (DMPORT)  
allows you to enjoy sound from a network  
system such as a portable audio source or  
computer.  
By connecting a DIGITAL MEDIA PORT  
adapter (not supplied), you can enjoy sound  
from the connected component on the  
receiver.  
HDMI  
DVD IN  
VIDEO 2/BD IN  
OUT  
DIGITAL  
L
L
For details, see the operating instructions  
supplied with the DIGITAL MEDIA PORT  
adapter.  
R
R
OPT IN  
AUDIO IN AUDIO IN AUDIO IN  
SA-CD/CD VIDEO 1  
SAT VIDOEPOT I2N/BD CDOAVXDIN  
TV  
DMPORT  
Notes  
• Do not connect an adapter other than the DIGITAL  
TV  
MEDIA PORT adapter.  
• Do not connect or disconnect the DIGITAL  
MEDIA PORT adapter while the receiver is turned  
on.  
• Depending on the DIGITAL MEDIA PORT  
adapter, video output may not be possible.  
• The DIGITAL MEDIA PORT adapters are  
available for purchase depending on the area.  
A
DIGITAL  
MEDIA PORT  
adapter  
* The type of connector varies depending on the  
DIGITAL MEDIA PORT adapter.  
For details, see the operating instructions supplied  
with the DIGITAL MEDIA PORT adapter.  
AVideo cord (not supplied)  
continued  
47GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To detach the DIGITAL MEDIA  
PORT adapter from DMPORT  
jack  
Listening to a connected  
component through DMPORT  
connection  
1
1 Press DMPORT.  
2
1
You can also use the INPUT SELECTOR  
on the receiver to select “DMPORT”.  
DMPOR  
T
2 Start playback of the connected  
Press and hold both sides of the connector and  
then pull out the connector.  
component.  
The sound is played back on the receiver.  
For details, see the operating instructions  
supplied with the DIGITAL MEDIA  
PORT adapter.  
Notes  
• When connecting the DIGITAL MEDIA PORT  
adapter, be sure the connector is inserted with the  
arrow mark facing toward the arrow mark on the  
DMPORT jack.  
Note  
Depending on the type of DIGITAL MEDIA PORT  
adapter, you can operate the connected component  
by using the remote. For details on remote button  
operation, see page 8.  
• Be sure to make DMPORT connections firmly,  
insert the connector straight in.  
• As the connector of the DIGITAL MEDIA PORT  
adapter is fragile, be sure to handle with care when  
placing or moving the receiver.  
Tip  
When listening to MP3 or other compressed music  
using a portable audio source, you can enhance the  
sound. Press MUSIC repeatedly to select  
“PORTABLE” (page 39).  
48GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Sleep Timer  
Using the Remote  
You can set the receiver to turn off  
automatically at a specified time.  
Changing button  
assignments  
You can change the factory settings of the  
input buttons to suit the components in your  
system. For example, if you connect a DVD  
recorder to the VIDEO 1 jacks on the receiver,  
you can set the VIDEO 1 button on this remote  
to control the DVD recorder.  
Press SLEEP repeatedly while the  
power is on.  
Each time you press the button, the display  
changes cyclically as follows:  
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00  
t OFF  
When sleep timer is activated, the display  
dims.  
1 Hold down the input button of  
which you want to change the  
assignment.  
Note  
If you press any buttons on the remote or receiver  
after the display dims, the display brightens up.  
After a while, the display dims again if no button is  
pressed.  
Example: Hold down VIDEO 1.  
2 Referring to the table below,  
press the corresponding  
button for the category you  
want.  
Tip  
To check the remaining time before the receiver  
turns off, press SLEEP. The remaining time appears  
on the display. If you press SLEEP again, the sleep  
timer will be canceled.  
Example: Press 4.  
Now you can use the VIDEO 1 button to  
control the DVD recorder.  
continued  
49GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Categories and the  
corresponding buttons  
Additional Information  
Categories  
Press  
a)  
Glossary  
VCR (command mode VTR 3)  
1
2
3
a)  
VCR (command mode VTR 2)  
x Dolby Digital  
DVD player/DVD recorder  
Digital audio encoding/decoding technology  
developed by Dolby Laboratories, Inc. It  
consists of front (Left/Right), center, surround  
(Left/Right) and sub woofer channels. It is a  
designated audio standard for DVD-video and  
also known as 5.1 channel surround. Since  
surround information is recorded and  
reproduced in stereo, more realistic sound with  
fuller presence is delivered than with Dolby  
surround.  
b)  
(command mode DVD1)  
DVD recorder  
(command mode DVD3)  
4
b)  
CD player  
5
6
7
Euro Digital Satellite Receiver  
DVR (Digital CATV terminal)  
DSS (Digital Satellite Receiver) 8  
Blu-ray disc player  
(command mode BD1)  
9
c)  
c)  
x Dolby Pro Logic II  
This technology converts 2 channel stereo  
recorded audio into 5.1 channel for playback.  
There is a MOVIE mode for movies and  
MUSIC mode for stereo sources such as  
music. Old movies encoded in the traditional  
stereo format can be enhanced with 5.1  
channel surround sound.  
Blu-ray disc recorder  
(command mode BD3)  
0/10  
-/--  
TV  
Not assigned  
ENTER/  
MEMORY  
a)  
Sony VCRs are operated with a VTR 2 or VTR 3  
setting which correspond to 8 mm and VHS  
respectively.  
Sony DVD recorders are operated with a DVD1 or  
DVD3 setting. For details, refer to the operating  
instructions supplied with the DVD recorders.  
For details on the BD1 or BD3 setting, refer to the  
operating instructions supplied with the Blu-ray  
disc player or Blu-ray disc recorder.  
x Dolby Surround (Dolby Pro  
Logic)  
b)  
c)  
Audio processing technology developed by  
Dolby Laboratories, Inc. Center and mono  
surround information is matrixed into two  
stereo channels. When reproduced, audio is  
decoded and output in 4 channel surround  
sound. This is the most common audio  
processing method for DVD-video.  
To clear all remote button  
assignments  
Press ?/1, DMPORT and MASTER VOL – at  
the same time.  
x DTS Digital Surround  
Digital audio encoding/decoding technology  
for theaters developed by DTS, Inc. It  
compresses audio less than Dolby Digital,  
delivering a higher quality sound  
reproduction.  
The remote is reset to its factory settings.  
50GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
x HDMI (High-Definition  
Multimedia Interface)  
Precautions  
HDMI is an interface that supports both video  
and audio on a single digital connection. The  
HDMI connection carries standard to high  
definition video signals and multi-channel  
audio signals to audio/video components, such  
as HDMI equipped TVs, in digital form  
without degradation. The HDMI specification  
supports HDCP (High-bandwidth Digital  
Contents Protection), a copy protection  
technology that incorporates coding  
On safety  
Should any solid object or liquid fall into the  
cabinet, unplug the receiver and have it  
checked by qualified personnel before  
operating it any further.  
On power sources  
• Before operating the receiver, check that the  
operating voltage is identical with your local  
power supply.  
technology for digital video signals.  
x Sampling frequency  
The operating voltage is indicated on the  
nameplate on the back of the receiver.  
• The unit is not disconnected from the AC  
power source (mains) as long as it is  
connected to the wall outlet, even if the unit  
itself has been turned off.  
• If you are not going to use the receiver for a  
long time, be sure to disconnect the receiver  
from the wall outlet. To disconnect the AC  
power cord, grasp the plug itself; never pull  
the cord.  
To convert analog audio to digital, analog data  
should be quantified. This process is called  
sampling, and the number of times per second  
the analog data is quantified is called the  
sampling frequency. A standard music CD  
stores data quantified at 44,100 times per  
second, which is expressed as a sampling  
frequency of 44.1 kHz. Generally speaking, a  
higher sampling frequency means better sound  
quality.  
• The AC power cord must be changed only at  
a qualified service shop.  
On heat buildup  
Although the receiver heats up during  
operation, this is not a malfunction. If you  
continuously use this receiver at a large  
volume, the cabinet temperature of the top,  
side and bottom rises considerably. To avoid  
burning yourself, do not touch the cabinet.  
continued  
51GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
On placement  
• Place the receiver in a location with adequate  
ventilation to prevent heat buildup and  
prolong the life of the receiver.  
If color irregularity is observed  
again...  
Place the speaker further away from the TV  
set.  
• Do not place the receiver near heat sources,  
or in a place subject to direct sunlight,  
excessive dust, or mechanical shock.  
• Do not place anything on top of the cabinet  
that might block the ventilation holes and  
cause malfunctions.  
• Do not place the receiver near equipment  
such as a TV, VCR, or tape deck. (If the  
receiver is being used in combination with a  
TV, VCR, or tape deck, and is placed too  
close to that equipment, noise may result,  
and picture quality may suffer. This is  
especially likely when using an indoor  
antenna. Therefore, we recommend using an  
outdoor antenna).  
If howling occurs  
Reposition the speakers or turn down the  
volume on the receiver.  
On cleaning  
Clean the cabinet, panel, and controls with a  
soft cloth slightly moistened with a mild  
detergent solution. Do not use any type of  
abrasive pad, scouring powder, or solvent,  
such as alcohol or benzine.  
If you have any questions or problems  
concerning your receiver, please consult your  
nearest Sony dealer.  
• Use caution when placing the receiver or  
speakers on surfaces that have been specially  
treated (with wax, oil, polish, etc.) as  
staining or discoloration of the surface may  
result.  
On operation  
Before connecting other components, be sure  
to turn off and unplug the receiver.  
If you encounter color  
irregularity on a nearby TV  
screen  
The front speakers, center speaker and the sub  
woofer are magnetically shielded to allow  
them to be installed near a TV set. However,  
color irregularities may still be observed on  
certain types of TV sets. As the surround  
speakers are not magnetically shielded, we  
recommend that you place the surround  
speakers slightly further away from TV set  
If color irregularity is  
observed...  
Turn off the TV set, then turn it on again after  
15 to 30 minutes.  
52GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
There is no sound from one of the front  
speakers.  
• Make sure you have connected to both the  
L and R jacks of an analog component, and  
not only to either the L or R jack. Use an  
audio cord (not supplied).  
Troubleshooting  
If you experience any of the following  
difficulties while using the receiver, use this  
troubleshooting guide to help you remedy the  
problem.  
There is no sound from the speakers of  
the receiver when you connect the  
receiver and the playback component  
via a HDMI connection.  
• Make sure that you have connected the  
digital audio jacks on the playback  
component to the receiver (page 17). Then,  
turn off or mute the TV’s volume.  
Audio  
There is no sound, no matter which  
component is selected, or only a very  
low-level sound is heard.  
• Check that the speakers and components  
are connected securely.  
• Check that both the receiver and all  
components are turned on.  
• Check that MASTER VOLUME is not set  
to “VOL MIN”.  
• Press MUTING to cancel the muting  
function.  
• Check that you have selected the correct  
component with the input buttons on the  
remote or INPUT SELECTOR on the  
receiver.  
The left and right sounds are  
unbalanced or reversed.  
• Check that the speakers and components  
are connected correctly and securely.  
• Adjust the balance parameters using the  
LEVEL menu (page 32).  
There is severe hum or noise.  
• Check that the speakers and components  
are connected securely.  
• Check that the connecting cords are away  
from a transformer or motor, and at least  
3 m away from a TV set or fluorescent  
light.  
• The protective device on the receiver has  
been activated. Turn off the receiver,  
eliminate the short-circuit problem, and  
turn on the power again.  
• Move your audio components away from  
the TV.  
• The plugs and jacks are dirty. Wipe them  
with a cloth slightly moistened with  
alcohol.  
There is no sound from a specific  
component.  
• Check that the component is connected  
correctly to the audio input jacks for that  
component.  
• Check that the cord(s) used for the  
connection is (are) fully inserted into the  
jacks on both the receiver and the  
component.  
• Check that you have selected the correct  
component with the input buttons on the  
remote or INPUT SELECTOR on the  
receiver.  
There is no sound, or only a very low-  
level sound is heard from the center/  
surround speakers.  
• Select a CINEMA STUDIO EX mode  
• Adjust the speaker level (page 25).  
There is no sound from the sub woofer.  
• Check that the sub woofer is connected  
correctly and securely.  
continued  
53GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tuner  
The surround effect cannot be  
obtained.  
The FM reception is poor.  
• Make sure you have selected a sound field  
with MOVIE or MUSIC button.  
• Sound fields do not function for signals  
with a sampling frequency of more than  
48 kHz.  
• Use a 75-ohm coaxial cable (not supplied)  
to connect the receiver to an outdoor FM  
antenna as shown below. If you connect  
the receiver to an outdoor antenna, ground  
it against lightning. To prevent a gas  
explosion, do not connect the ground wire  
to a gas pipe.  
Dolby Digital or DTS multi channel  
sound is not reproduced.  
• Check that the DVD, etc. you are playing  
is recorded in Dolby Digital or DTS  
format.  
• When connecting the DVD player, etc., to  
the digital input jacks of this receiver,  
check the audio setting (the settings for the  
audio output) of the connected component.  
Outdoor FM antenna  
Receiver  
AM  
Ground wire  
(not supplied)  
ANTENNA  
Video  
To ground  
There is no picture or an unclear  
picture appears on the TV screen or  
monitor.  
• Make sure you have connected the video  
output of your video component to the TV.  
• Move your audio components away from  
the TV.  
Radio stations cannot be tuned in.  
• Check that the antennas are connected  
securely. Adjust the antennas and connect  
an external antenna, if necessary.  
• The signal strength of the stations is too  
weak (when tuning in with automatic  
tuning). Use direct tuning (page 43).  
• Make sure you set the tuning interval  
correctly (when tuning in AM stations  
with direct tuning).  
The source image input to the HDMI  
jack on the receiver is not output from  
the TV.  
• Check the HDMI connection.  
• Depending on the playback component,  
you may need to set up the component.  
Refer to the operating instructions  
supplied with each component.  
• No stations have been preset or the preset  
stations have been cleared (when tuning  
by scanning preset stations). Preset the  
stations (page 44).  
RDS does not work.  
• Make sure that you are tuned to an FM  
RDS station.  
• Select a stronger FM station.  
54GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you are unable to remedy the  
problem using the  
The RDS information that you want  
does not appear.  
• Contact the radio station and find out  
whether they actually provide the service  
in question. If so, the service may be  
temporarily out of order.  
troubleshooting guide  
Clearing the receiver’s memory may remedy  
the problem (page 20). However, note that all  
memorized settings will be reset to their  
factory settings and you will have to readjust  
all settings on the receiver.  
Remote commander  
If the problem persist  
Consult your nearest Sony dealer. Note that if  
service personnel changes some parts during  
repair, these parts may be retained.  
The remote does not function.  
• For receiver operation, you can only use  
the DISPLAY button when the TUNER  
input is selected.  
• Point the remote at the remote sensor on  
the receiver.  
• Remove any obstacles in the path between  
the remote and the receiver.  
Reference sections for clearing  
the receiver’s memory  
To clear  
See  
• Replace all the batteries in the remote with  
new ones, if they are weak.  
• Make sure you select the correct input on  
the remote.  
All memorized settings  
Customized sound fields  
• The VIDEO 3 button on the remote is not  
available for receiver operation.  
Error messages  
If there is a malfunction, the display shows a  
message. You can check the condition of the  
system by the message. Refer to the following  
table to solve the problem. If any problem  
persists, consult your nearest Sony dealer.  
If an error message appears while you perform  
codes” (page 23) to solve the problem.  
PROTECT  
Irregular current is output from the  
speakers. The receiver will automatically  
turn off after a few seconds. Check the  
speaker connection and turn on the power  
again.  
55GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
AM tuner section  
Tuning range  
With 9-kHz tuning scale:  
Specifications  
531 – 1,602 kHz  
Loop antenna  
Intermediate frequency  
450 kHz  
Amplifier section  
Antenna  
1)  
Power Output  
Stereo mode (rated) 70 W + 70 W  
(4 ohms at 1 kHz,  
THD 1%)  
General  
Surround mode (reference)  
RMS Output  
Power requirements 230 V AC, 50/60 Hz  
Power output (DIGITAL MEDIA PORT)  
2)  
FRONT : 143 W/ch  
DC OUT:  
5 V, 700 mA  
(With SS-MSP1100)  
Power consumption 110 W  
Power consumption (during standby mode)  
0.3 W  
2)  
CENTER : 143 W  
(With SS-CNP1100)  
2)  
SUR : 143 W/ch  
Dimensions (w/h/d) (Approx.)  
(With SS-SRP1100)  
430 × 66.5 × 335 mm  
including projecting parts  
and controls  
2)  
SUBWOOFER : 285 W  
(With SS-WP1100)  
Mass (Approx.)  
3.6 kg  
1)  
Measured under the following conditions:  
230 V AC, 50 Hz  
Reference power output for front, center, surround  
speakers and subwoofer. Depending on the sound  
field settings and the source, there may be no  
sound output.  
Speaker section  
2)  
• Front speakers (SS-MSP1100)  
• Center speaker (SS-CNP1100)  
• Surround speakers (SS-SRP1100)  
Front/center speakers  
Full range, magnetically  
shielded  
Inputs  
Analog  
Digital (Coaxial) Impedance: 75 ohms  
Tone  
Gain levels  
Reproduction frequency range:  
28 – 20,000 Hz  
Sensitivity: 1 V/50 kohms  
Surround speakers Full range  
Speaker units  
Enclosure type  
Rated Impedance  
57 mm cone type  
Bass reflex  
6 dB, 1 dB step  
2.7 ohms  
Dimension (w/h/d) (Approx.)  
Front/surround speakers  
80 × 150 × 88 mm  
FM tuner section  
Center speaker  
Mass (Approx.)  
Front speaker  
250 × 85 × 88 mm  
Tuning range  
87.5 - 108.0 MHz  
FM wire antenna  
Antenna  
0.5 kg  
0.7 kg  
Antenna terminals 75 ohms, unbalanced  
Intermediate frequency  
10.7 MHz  
Center speaker  
Surround speaker 0.4 kg  
56GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
• Subwoofer (SS-WP1100)  
Speaker system  
Magnetically shielded  
Speaker unit  
Enclosure type  
Rated Impedance  
160 mm cone type  
Bass reflex  
1.3 ohms  
Dimensions (w/h/d) (Approx.)  
200 × 382 × 337 mm  
including front panel  
4.5 kg  
Mass (Approx.)  
Supplied speakers  
Front speakers (2)  
• Center speaker (1)  
Surround speakers (2)  
Sub woofer (1)  
Supplied accessories  
FM wire antenna (1)  
AM loop antenna (1)  
Remote commander RM-AAU017 (1)  
R6 (size-AA) batteries (2)  
Optimizer microphone (ECM-AC2 or  
ECM-AC2a) (1)  
Speaker cords  
Long (2)  
• Short (3)  
Coaxial digital cord (1)  
Foot pads  
Speakers (20)  
Sub woofer (4)  
Design and specifications are subject to  
change without notice.  
57GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Numerics  
2 channel 41  
2CH STEREO 41  
5.1 channel 11  
I
T
Initial setup 20  
TEST TONE 25  
Tuner  
connecting 19  
Tuning  
M
Menu  
automatically 42  
directly 43  
to preset stations 45  
A
A. CAL 37  
AUDIO 34  
LEVEL 32  
SUR 33  
AUTO CALIBRATION 21  
AUTO FORMAT DIRECT  
(A.F.D.) 37  
V
SYSTEM 35  
TONE 33  
TUNER 34  
Muting 26  
VCR  
B
connecting 15  
Blu-ray disc player  
connecting 17  
R
C
RDS 45  
CD player  
connecting 14  
playback 27  
Remote commander 8  
S
Satellite tuner/Set-top box  
connecting 15  
Selecting  
D
Digital Cinema Sound  
(DCS) 40  
component 26  
sound field 39  
Sleep Timer 49  
Sound fields  
resetting 42  
selecting 39  
Speakers  
DIGITAL MEDIA PORT  
connecting 47  
Dolby Digital 50  
DTS 50  
DVD player  
connecting 15  
playback 28  
connecting 13  
installing 11  
Super Audio CD player  
connecting 14  
playback 27  
DVD recorder  
connecting 15  
E
Error messages 55  
H
HDMI  
connecting 17  
58GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
(1)  
Sony Corporation Printed in Malaysia  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Microphone SKM 945 User Manual
Snapper Automobile Parts 6 1276 User Manual
Snapper Lawn Mower 16900395 User Manual
Sony CD Player CDP CA8ES User Manual
Sony Computer Monitor CPD L133 User Manual
Sony Flat Panel Television 4 180 179 161 User Manual
Sony Indoor Furnishings XL 2100 User Manual
Sony Kitchen Entertainment Center VGN SZ200 User Manual
Speco Technologies Security Camera CVC 645DC User Manual
Subaru Robin Power Products Portable Generator PUB GP6050 User Manual