IT
4-116-383-23 (1)
Multi-Card
Reader/Writer
Operating Instructions
JP
Before operating the unit, please read this document
thoroughly, and retain it for future reference.
FR
DE
ES
IT
CS
MRW62E-T2
© 2008 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
Table of contents
This symbol on the product or
on its packaging indicates that
this product shall not be
treated as household waste.
Instead it shall be handed over
to the applicable collection
point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise be
caused by inappropriate waste handling of
this product.
The recycling of materials will help to
conserve natural resources. For more
detailed information about recycling of this
product, please contact your local Civic
office, your household waste disposal
service or the shop where you purchased the
product.
Connecting the Reader/Writer to a
Disconnecting the Reader/
Writer From the Computer .............. 13
Installing the Drive Letter
(Windows Only) .............................. 14
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
The MRW62E-T2 (hereafter referred to as
the “reader/writer”) has the following
features:
• Quick and simple data transfer – easily
transfer images from camera to PC
• Compatible with “Memory Stick,”
“Memory Stick PRO,” “Memory Stick
Duo,” MultiMediaCard, SD Memory Card
• Quick to Connect – Hot-pluggable
USB-powered design
System
Requirements
The reader/writer requires the following
minimum system configuration:
• OS
– Windows
®
7
®
– Windows Vista
®
– Windows XP Home or Professional
®
– Windows 2000 Professional (Service
Pack 4 or later)
®
• Drive Letter Recognition Software can be
downloaded from the web site
– Windows Me
– Mac OS X 10.1.2 or later
This product works with the standard
drivers in Windows.
Package Contents
When you unpack the box, make sure that it
contains all the accessories listed below.
If anything is missing or damaged, contact
your retailer.
• MRW62E-T2 Multi-Card Reader/Writer
• USB cable
• Read Me First
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Supported Media
The reader/writer supports the following
media:
• Not all memory cards are guaranteed to work.
Operation is not assured if non-supported
memory cards are used.
• “MagicGate” is the general name of a copyright
protection technology developed by Sony.
• Recording or playback of MagicGate data that
uses MagicGate technology is not supported.
• The capacity of a file to be recorded/played back
is smaller than 4 GB per file according to the
specifications of the system incorporated in
“Memory Stick.”
“Memory Stick” media
• “Memory Stick” (without MagicGate)
• “MagicGate Memory Stick”
• “Memory Stick” (with MagicGate)
*1
• “Memory Stick Duo” (without MagicGate)
• Although operation check of this product has
been performed with up to 8 GB “Memory
Stick,” please note that the operation is not
guaranteed for every type of “Memory Stick.”
• Recording or playback of data that uses SD
technology is not supported.
• In this manual, all types of media listed in
“Supported Media” are generically called
memory cards.
• I/O cards that are not memory cards, such as
GPS cards, are not supported.
• MultiMediaCards and SD Memory Cards use the
same slot, so you cannot use them at the same
time.
• “MagicGate Memory Stick Duo”
*1
• “Memory Stick Duo” (with MagicGate)
*1
• “Memory Stick PRO”
*1
• “Memory Stick PRO Duo”
*1
• “Memory Stick PRO-HG Duo”
• “Memory Stick Micro” (“M2”)
*1*2*3
SD memory cards
• SD Memory Card
• SDHCTM Memory Card
• miniSDTM card
• miniSDHCTM card
*3
• microSDTM card
• The “Memory Stick” media all use the same slot,
so you cannot use them at the same time.
• Only DOS format is supported. Memory cards in
other formats are not supported.
*3
• microSDHCTM card
Other memory cards
• MultiMediaCard
• RS-MMC
• MMCplus
• MMCmobile
*3
• MMCmicro
*1 4-bit parallel data transfer is supported. It,
however, varies depending on each medium
how long it takes to read/write data.
*2 “M2” is an abbreviation of “Memory Stick
Micro.” In this document, hereinafter, the
abbreviation “M2,” is used.
*3 With adaptor (not supplied) only.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts and Functions
Front
Rear
D USB Port (mini B)
Connect to a computer using the supplied
USB cable.
A Access Indicator
This indicator is always lit. The indicator
blinks when the reader/writer accesses
data on a memory card.
B MultiMediaCard/SD Memory Card
Slot
Insert either a MultiMediaCard or an SD
Memory Card here.
When inserting a microSD, microSDHC
Card or an MMCmicro, use an adaptor
( not supplied ).
C “Memory Stick” Slot
Insert a “Memory Stick” media here.
When inserting a “Memory Stick Micro”
(“M2”), use an adaptor (not supplied ).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
x For Windows
• On some computers, a message may appear
asking you to insert the operating system
disc. When this happens, follow the
computer’s instructions.
• On some computers, the “HI-SPEED USB
Device Plugged into non-HI-SPEED USB
Hub” message may appear, indicating that
a hi-speed USB device has been connected
to a USB port which does not support hi-
speed USB. If your computer has multiple
USB ports, try connecting to a different
port.
Connecting the
Reader/Writer to a
Computer
Simply connect the reader/writer to a
computer using the supplied USB cable.
1 Start the computer.
2 Connect the smaller connector
of the USB cable to the USB port
on the rear of the reader/writer.
Otherwise, close the message and continue
using the reader/writer with the current
port.
3 Connect the larger connector of
the USB cable to the USB port on
the computer.
The computer recognizes the reader/
writer as a removable disk, and the
reader/writer is ready for use.
Notes
• Do not connect to a computer via a USB hub.
• Depending on the computer and the status of its
operating system, the reader/writer may not
operate or may become unstable. If this occurs,
refer to the “Troubleshooting” section.
• After disconnecting the USB cable, wait at least
5 seconds before reconnecting it. (Otherwise, the
reader/writer may not be recognized.)
• When two or more USB devices are connected to
one computer, the reader/writer is not guaranteed
to operate simultaneously with some types of
USB device.
• You cannot access two or more memory cards
simultaneously on a single computer by
connecting additional memory card devices.
Remove any memory cards from the reader/
writer or turn off the other devices.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
• Follow the steps below to turn off
the write cache setting for
removable disk drives. Leaving this
setting on may cause the reader/
writer to malfunction.
– On Windows 2000:
Open the following items in the
following order: [Start] button –
[Settings] – [Control Panel] – [System] –
[Hardware] tab – [Device Manager]
button – [Disk drives] – [Sony Card_R/
W -MS USB Device]. On the [Disk
Properties] tab in the properties dialog
box that appears, make sure the [Write
Cache enabled] check box is not selected.
In the same way, clear the [Write Cache
enabled] check box on the [Disk
Properties] tab of the [Sony Card_R/W
-SD USB Device].
– On Windows 7:
Open the following items in the
following order: [Start] button- [Control
Panel] - [System and Security] - [Device
Manager] (Click on the Device Manager
link located under the System heading) -
[Disk drives] - [Sony Card_R/W -MS
USB Device]. On the [Policies] tab in the
properties dialog box that appears, make
sure that [Quick removal (default)] is
selected. In the same way, select [Quick
removal (default)] on the policies] tab of
the [Sony Card_R/W -SD USB Device].
– On Windows Me:
Open the following items in the
following order: [Start] button –
[Settings] – [Control Panel] – [System] –
[Performance] tab – [File System]
button. On the [Removable Disk] tab in
the properties dialog box that appears,
make sure the [Enable write-behind
caching on all removable disk drives.]
check box is not selected.
– On Windows Vista:
Open the following items in the
following order: [Start] button - [Control
Panel] - [System and Maintenance] -
[Device Manager] button (When clicking
on [Device Manager] button, the User
Account Control window will appear,
click on [Continued]) - [Disk drives] -
[Sony Card_R/W -MS USB Device]. On
the [Policies] tab in the properties dialog
box that appears, make sure that
[Optimize for quick removal] is selected.
In the same way, select [Optimize for
quick removal] on the [Policies] tab of
the [Sony Card_R/W -SD USB Device].
– On Windows XP:
Open the following items in the
following order: [Start] button –
[Control Panel] – [Performance and
Maintenance] – [System] – [Hardware]
tab – [Device Manager] button – [Disk
drives] – [Sony Card_R/W -MS USB
Device]. On the [Policies] tab in the
properties dialog box that appears, make
sure that [Optimize for quick removal] is
selected.
In the same way, select [Optimize for
quick removal] on the [Policies] tab of
the [Sony Card_R/W -SD USB Device].
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Using the Reader/
Writer
• Each card slot is designed so a card can only be
inserted in the correct direction.
• Insert only one memory card into the
corresponding slot. Do not insert multiple cards
at the same time.
Caution
• When inserting a “Memory Stick Micro”
(“M2”), microSD Card, microSDHC Card or
MMCmicro, use an appropriate adaptor (not
supplied ).
• Do not insert a card upside down.
• Forcibly inserting the card may damage the card
or the slot.
• If a memory card is inserted incorrectly, you may
not be able to remove it. In the unlikely event
that a memory card becomes stuck in the reader/
writer, consult your local Sony dealer.
Do not touch and remove a memory card from the
reader/writer while the access indicator is blinking.
The data stored on the memory card may be
damaged.
Inserting a Memory Card
Insert a memory card into the corresponding
slot on the reader/writer.
When inserting a card, push it in as far as it
can go.
Insert one of the following cards in this slot:
• SD Memory Card
• SDHC Memory Card
• miniSD Card
• MultiMediaCard
• RS-MMC
• MMCplus
• miniSDHC Card
• microSD Card
• MMCmobile
• MMCmicro
• microSDHC Card
Insert one of the following cards in this slot:
• “Memory Stick”
• “Memory Stick Duo”
(with MagicGate)
• “Memory Stick PRO”
• “Memory Stick PRO Duo”
• “Memory Stick PRO-HG
Duo”
(without MagicGate)
• “MagicGate Memory Stick”
• “Memory Stick”
(with MagicGate)
• “Memory Stick Duo”
(without MagicGate)
• “MagicGate Memory Stick
Duo”
• “Memory Stick Micro”
(“M2”)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer drive
name
Corresponding
memory card
Reading and Writing Data on a
Memory Card
MultiMediaCard
SD Memory Card
Removable Disk (E:)
Removable Disk (F:)
x For Windows
The following explanation is illustrated with
screens from Windows XP.
The screens may differ for other versions of
Windows.
“Memory Stick” media
3 Insert a memory card into the
corresponding slot.
When a volume label has been assigned
to the memory card, the volume label will
be displayed together with the removable
disk icon.
1 Open [My Computer].
4 Use the removable disk icon to
read or write data on the memory
card.
If the following message appears, the
memory card has not been recognized
correctly, even though the access
indicator lights up. Remove the card and
insert it again.
2 Make sure the removable disk
icons appear in [My Computer].
Drive letters for the removable disk icons
are assigned in alphabetical order to the
MultiMediaCard/SD Memory Card Slot,
and “Memory Stick” Slot.
For example, if the computer has an A:,
C:, and D: drive before connecting the
reader/writer, the drive letters will be
assigned as follows when the reader/
writer is connected:
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Removing a Memory Card
• Use the removable disk icon for the memory
card you are using.
• It may take a while for the removable disk
icons to appear.
• If the removable disk icons do not appear,
follow the steps under “Disconnecting the
page 13 to disconnect the reader/writer, and
then wait at least 5 seconds before
reconnecting it.
Note
Be sure to follow the steps described below.
Sony accepts no responsibility for any damage or
loss that results from removing a memory card
without following the procedure described below.
x For Windows
1 Make sure the access indicator
is not blinking.
If the [Safely Remove Hardware] icon
mentioned in step 1 of “Disconnecting the
Reader/Writer From the Computer” is not
displayed, skip the rest of the procedure and
immediately disconnect the reader/writer.
• Depending on your operating system and
the type of memory card you are using, the
reader/writer drives may be recognized as
“Local Disks” instead of “Removable
Disks,” but this will not affect their
operation.
2 Open [My Computer].
3 Right-click the removable disk
icon, and select [Eject].
4 Pull the memory card straight
out.
x For Macintosh
x For Macintosh
1 Insert a memory card into the
corresponding slot.
1 Close the files saved on the
memory card, and exit any
The removable disk icon appears on the
desktop.
currently running applications.
When a volume label is assigned to the
memory card, the volume label will be
displayed together with the removable
disk icon.
2 Make sure the access indicator
is not blinking.
3 Drag the removable disk icon to
the [Trash].
Alternatively, select the removable disk
icon, access the [File] menu on the menu
bar, and select [Eject “Untitled”]*.
* Depending on the memory card, a different
label than “Untitled” may be shown.
4 Pull the memory card straight
out.
2 Use the removable disk icon to
read or write data on the memory
card.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Reading the Access Indicator
The access indicator changes according to the
status of the reader/writer, as follows:
Reader/writer
Access indicator
status
Connected to a
Lights up
computer
Reading/writing data
Blinks*
* Depending on your operating environment and
the memory card you are using, the access
indicator may blink so quickly it appears to be
lit. Be careful not to misread the access indicator.
Note
If data cannot be read from or written to the
memory card while the access indicator is lit, make
sure the card is fully inserted into the slot.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Make sure the message “The
‘USB Mass Storage Device’
device can now be safely
removed from the system.”
appears, and then disconnect
the reader/writer.
Disconnecting the
Reader/Writer
From the
Computer
Notes
The ‘USB Mass Storage Device’ device
can now be safely removed from the
system.
• Do not disconnect the reader/writer from the
computer while the access indicator is blinking.
Doing so may cause damage to the data stored on
the memory card.
• Be sure to follow the steps described below.
Sony accepts no responsibility for any damage or
loss that results from disconnecting the reader/
writer without following the procedure
described below.
Note
The above steps are not required when removing a
memory card from the reader/writer.
x For Macintosh
1 Close the files saved on the
memory card, and exit any
x For Windows
The following explanation is illustrated with
screens from Windows XP, and assumes that
drive names E:, and F: are assigned to the two
slots of the reader/writer.
The screens may differ for other versions of
Windows.
currently running applications.
2 Make sure the access indicator
is not blinking.
3 Drag the removable disk icon to
the [Trash].
1 Click [Safely Remove Hardware]
on the task tray, located at the
lower right corner of the screen.
Alternatively, select the removable disk
icon, access the [File] menu on the menu
bar, and select [Eject “Untitled”]*.
Click this icon
* Depending on the memory card, a different
label than “Untitled” may be shown.
If no memory card is inserted into the
reader/writer, skip this step.
Task tray
4 Disconnect the reader/writer
from the computer.
2 Click [Safely remove USB Mass
Storage Device - Drives (E:, F:)].
Click here
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Icons
Once the Drive Letter Recognition Software
is installed, the Removable Disk icons and
their descriptions change.
For example, if the computer has an A:, C:,
and D: drive before connecting the reader/
writer, the drive letters will be assigned as
follows when the reader/writer is connected:
Installing the Drive
Letter Recognition
Software
(Windows Only)
Corresponding
Computer drive name
Before starting installation, read the “End
User License Agreement.”
memory card
MultiMediaCard
SD Memory Card
MMC/SD (E:)
1 Download the installer file from
the web site. The installer file can
be downloaded from the
“Memory Stick”
media
Memory Stick (F:)
following URL
Notes
• The use of this software is intended only for this
reader/writer. Other reader/writers may not work
with this software.
• Uninstall any similar software before installation
to ensure that the software functions properly.
2 Close all programs that are still
running.
3 Double click the installer file.
(For windows Vista, User
Account Control window will
appear, click on [Allow].)
4 When the following window
appears, the installing is
completed, and click [OK].
14
Download from Www.Somanuals.com. All Manuals Search And Download.
• When you use “Memory Stick Duo”,
please make sure to attach it in the right
direction.
• “Memory Stick Duo”, “Memory Stick
Micro” and M2 Duo Size Adaptor should
be kept away from small children to
prevent them from accidentally swallowing
it.
About Memory
Stick
What is “Memory Stick”?
“Memory Stick” is a compact-size IC
recording medium with a large capacity. It
has been designed not only for exchanging/
sharing digital data among “Memory Stick”
compliant products, but also for serving as an
insertable/removable external storage
medium that can save data.
• When you use “Memory Stick Micro” on
this product, please make sure to attache
the media into M2 adaptor of standard size.
If you attempt to insert “Memory Stick
Micro” without attaching to M2 adaptor,
there is a possibility that it cannot be pulled
out.
Notes on “Memory Stick”
On formatting (initialization)
• If you format media in which data has been
already written, all the data will be erased.
Please be cautious not to mistakenly erase
any important data.
• Please make sure to format (initialize) a
medium with the formatter of a “Memory
Stick” compliant product. If it is initialized
with Windows Explorer, a FORMAT
ERROR occurs, and data on the medium
can no longer be used by this product.
About the size of “Memory Stick”
• This product has a slot that can take both
standard size and Duo size. All the products
with such a slot as this are equipped with a
system which automatically measures the
size of an inserted medium. That’s why
both standard-size “Memory Stick” and
smaller “Memory Stick Duo” can be used
on this product without any Memory Stick
Duo Adaptor.
• Do not insert multiple “Memory Sticks” at
the same time. It might cause damage to the
product.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you set Write-Protected switch “LOCK,”
data cannot be recorded, edited, or erased.
• Do not stick anything other than the
supplied labels on the label area of
“Memory Stick.”
• Stick a label precisely within the label area.
Make sure that the label does not go beyond
the area.
Usage Notes
“Memory Stick” Media
Notes on using “Memory Stick”
media
• Carry and keep “Memory Stick” in the
supplied case.
Terminal
Notes on using “Memory Stick Duo/
Memory Stick PRO Duo”
Write-
Protected
switch
Terminal
Label area
Write-
Protected
switch
• Do not remove “Memory Stick” while data
is being read or written.
Memo area
• Data may be damaged if:
– You remove “Memory Stick” or
disconnect the USB cable while data is
being read or written.
– You use “Memory Stick” in a place
where it is susceptible to static electricity
or electric noise.
• You can keep backup copies of important
data on a “Memory Stick.”
• Avoid touching the metal terminals on the
“Memory Stick” to prevent damage from
static discharge.
• When you use “Memory Stick Duo/
Memory Stick PRO Duo” without Write-
Protected switch, be careful not to edit or
erase important data by mistake.
• When you use “Memory Stick Duo/
Memory Stick PRO Duo” with Write-
Protected switch, data cannot be recorded,
edited, or erased by “LOCK” the switch.
• Use an object with a sharp tip to move the
Write-Protected switch.
• Do not press on the memo area strongly
when writing.
• Carry and keep “Memory Stick” in the
supplied case.
• Do not subject the “Memory Stick” to
excessive stress or shock.
• Do not disassemble or modify “Memory
Stick.”
• Keep “Memory Stick” and other media
away from water, excessive heat and
humidity, and from corrosive elements.
• Do not use or keep “Memory Stick” under
an unfavorable condition as below:
– Extremely hot place (such as in a parked
car with windows closed in summer, a
spot under direct sunlight, or near an
electrical appliance that radiates heat).
– Humid place.
– Place near corrosive substances.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating and storage
environments
Other Points to Note
• Do not place the reader/writer close to heat
sources or in direct sunlight; in dusty, dirty,
or humid locations; under precipitation
such as rain; or leave it in a vehicle with the
windows closed.
• If the reader/writer interferes with the
reception of radio or television signals,
move the reader/writer away from the radio
or television.
Media formatting
Do not format (initialize) memory cards with
a computer. If you format a memory card
with a computer, devices such as digital
cameras may not be able to use it due to
differences in format type (FAT size, cluster
size, hard disk type, or super floppy disk
type). If you use a digital camera, format
memory cards with your camera, instead.
• When using the reader/writer, do not wrap
it in cloth, sheets, or covers as this may
cause a malfunction or fire.
Restrictions on DOS mode
In Windows, the reader/ writer does not
operate in DOS mode.
To use the reader/writer, start up Windows.
Standby
The reader/writer supports standby functions
based on the PC2000 standard, which may
not cover the standby function of all
computers. Disable the standby function of
your computer if it causes any problems.
While the computer is in standby, do not
insert or remove any media.
Antivirus software
If you have memory-resident antivirus
software on your computer, the computer
may hang or become unusually slow. In this
case, set your antivirus software so it does not
scan the media in the reader/writer.
Do not attempt to dismantle, repair,
or alter the reader/writer yourself
Do not, under any circumstances, attempt to
dismantle, repair, or alter the reader/writer
yourself. You may not only permanently
damage the reader/writer and/or your
computer, but may also cause fire or personal
injury through electrical shock.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before consulting your Sony representative, verify the following.
If the problem still persists, consult your local Sony dealer.
Problem
Solution
The computer does not detect c Your computer and the reader/writer may not be properly connected.
the reader/writer. Disconnect the reader/writer from the computer and reconnect it.
The removable disk icon does c Your computer and the reader/writer may not be properly connected.
not appear.
See “Connecting the Reader/Writer to a Computer” and make sure
the connection is correct.
c A USB device other than the reader/writer is connected to the USB
port on the computer.
The removable disk icons does c Restart your computer.
not change after the Drive
Letter Recognition Software is
installed.
The memory card cannot be
accessed with Windows
Explorer or My Computer.
c No memory card is inserted. Insert a memory card into the proper
slot.
The computer does not
recognize the memory card.
c The memory card is not fully inserted. Insert the card completely.
c The memory card is not inserted straight. Remove the card and insert
it again.
The read/write speed is slow. c The speed may vary depending on the environment or the memory
card being used. This is not a malfunction.
With Windows 2000 or
c Make sure that the “USB Mass Storage Device” is not displayed as
in the “Device Manager.” If it is, delete it, disconnect the USB
cable from your computer, and then reconnect it.
Windows Me, the drive icon of
the unit does not appear in the
“My Computer” window.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Technical Support
• For customers in Europe
USB transfer rate
Refer to “Sony at your service” of the
EUROPEAN GUARANTEE
INFORMATION DOCUMENT or check
on-line under
Full-speed (12 Mbps)
High-speed (480 Mbps)
This high-speed transfer rate is a theoretical
value for the USB standard.
Actual performance is dependent on the
device.
Power requirements
4.75 V to 5.25 V DC
Current consumption
Max. 500 mA
Access indicator
Always lit
Blinks on access
Operating environment
Temperature: 5 °C to 40 °C
(41 °F to 104 °F)
Humidity: 30% to 80% RH
Storage environment
Temperature: –30 °C to + 60 °C
(–22 °F to +140 °F)
Humidity: No condensation
Dimensions (W × H × D)
Approx. 69 × 11 × 39 mm
(2 3/4 × 7/16 × 1 9/16 inches)
(excluding protrusions)
Mass
Approx. 28 g (1 oz.) (TYP)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The User may not export or transport
the PROGRAM or documents
End User License
Agreement
accompanying the PROGRAM from
the country where the User installed
the PROGRAM to any other country.
IMPORTANT NOTICE
5. The User may not (i) update, add to, or
modify nor (ii) deassemble or de-
compile the PROGRAM either in
whole or in part.
The following “END USER LICENSE
AGREEMENT” applies to the Drive Letter
Recognition Software provided by Sony.
Please read the following “END USER
LICENSE AGREEMENT” before installing.
By installing the Drive Letter Recognition
Software, you agree to the “END USER
LICENSE AGREEMENT.”
6. THE PROGRAM IS PROVIDED “AS
IS” WITHOUT EXPRESS OR
IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF
MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE OR NON-
END USER LICENSE AGREEMENT
This is a legal agreement between you
(hereafter referred to as the User) and Sony
Corporation (hereafter referred to as Sony)
pertaining to the right to use the software
(hereafter referred to as the PROGRAM).
Using the PROGRAM indicates your
DEFECTIVENESS.
7. If any dispute relating to infringement of
copyright, patent, or other intangible
property rights arises between the User
and a third party as a consequence of use
of the PROGRAM, the User shall settle
the dispute at the User’s own expense,
and shall make no claim against Sony or
the original rightful person.
acceptance of these terms and conclusion of
the Agreement between the User and Sony.
1. Copyright and all other rights relating
to the PROGRAM and documents
accompanying the PROGRAM are
owned by Sony or the original rightful
person or organization (hereafter
referred to as the original rightful
person) granting Sony the right to use
the PROGRAM. The User is granted
no rights other than those specified in
this agreement.
8. Sony may terminate your license upon
notice for failure to comply with any of
these Terms. Any such termination
shall not affect any payments, any
compensation for damage. Upon
termination, you must immediately
destroy the Software together with all
copies in any form.
2. Sony grants the User the non-exclusive,
indivisible and nontransferable right to
use the PROGRAM for the purpose of
using the Sony product Multi-Card
Reader/Writer for which the
9. This Agreement has several non-
English language versions for the
reference purpose only. In the event of
any discrepancy between the English
language version and any other
language version, the English language
version shall prevail.
PROGRAM designates.
3. The User may not transfer the Right of
Use described above to any third party
nor allow for any third party to use the
PROGRAM unless the User obtains
the advance written permission of
Sony.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|