4-236-529-13(1)
Compact AV
System
Operating Instructions
DAV-C700
© 2001 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome!
Thank you for purchasing this Sony
Compact AV System. Before
operating this system, please read
this manual thoroughly and retain it
for future reference.
Installing
Precautions
Safety
• Do not install the appliance in a
confined space, such as a bookcase
or built-in cabinet.
• If anything falls into the cabinet,
unplug the unit and have it
checked by qualified personnel
before operating it any further.
• The unit is not disconnected from
the mains as long as it is
connected to the mains outlet,
even if the unit itself has been
turned off.
• Unplug the unit from the wall
outlet if you do not intend to use it
for an extended period of time. To
disconnect the cord, pull it out by
the plug, never by the cord.
• Allow adequate air circulation to
prevent internal heat buildup.
• Do not place the unit on surfaces
(rugs, blankets, etc.) or near
materials (curtains, draperies) that
may block the ventilation slots.
• Do not install the unit near heat
sources such as radiators, or air
ducts, or in a place subject to
direct sunlight, excessive dust,
mechanical vibration, or shock.
• Do not install the unit in an
inclined position. It is designed to
be operated in a horizontal
position only.
• Keep the unit and discs away from
equipment with strong magnets,
such as microwave ovens, or large
loudspeakers.
• Do not place heavy objects on the
unit.
• If the unit is brought directly from
a cold to a warm location,
moisture may condense inside the
Compact AV System and cause
damage to the lenses. When you
first install the unit, or when you
move it from a cold to a warm
location, wait for about 30 minutes
before operating the unit.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• When you move the system, take out any discs.
If you don’t, the disc may be damaged.
Precautions
• For power saving purposes, the system can be
completely turned off by the POWER button on
the main unit. Though the LED remains lit for a
while, the system is completely off.
On safety
• Caution – The use of optical instruments with
this product will increase eye hazard.
• Should any solid object or liquid fall into the
cabinet, unplug the system and have it checked
by qualified personnel before operating it any
further.
On adjusting volume
Do not turn up the volume while listening to a
section with very low level inputs or no audio
signals. If you do, the speakers may be damaged
when a peak level section is played.
On power sources
On cleaning
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been
turned off.
• AC power cord must be changed only at the
qualified service shop.
Clean the cabinet, panel, and controls with a soft
cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol or
benzine.
If you have any questions or problems concerning
your system, please consult your nearest Sony
dealer.
On placement
• Place the system in a location with adequate
ventilation to prevent heat build-up in the
system.
• At high volume, over long periods of time, the
cabinet becomes hot to the touch. This is not a
malfunction. However, touching the cabinet
should be avoided. Do not place the unit in a
confined space where ventilation is poor as this
may cause overheating.
• Do not block the ventilation slots by putting
anything on the system. The system is equipped
with a high power amplifier. If the ventilation
slots on the top surface are blocked, the unit can
overheat and malfunction.
On cleaning discs
Do not use a commercially available CD/DVD
cleaning disc. It may cause a malfunction.
On your TV’s colour
If the speakers should cause the TV screen to have
colour irregularity, turn off the TV at once then
turn it on after 15 to 30 minutes. If colour
irregularity should persist, place the speakers
further away from the set.
• Do not place the system on a soft surface such
as a rug that might block the ventilation holes
on the bottom.
• Do not place the system in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
IMPORTANT NOTICE
Caution: This system is capable of holding a still
video image or on-screen display image on your
television screen indefinitely. If you leave the
still video image or on-screen display image
displayed on your TV for an extended period of
time you risk permanent damage to your
television screen. Projection televisions are
especially susceptible to this.
On operation
• If the system is brought directly from a cold to a
warm location, or is placed in a very damp
room, moisture may condense on the lenses
inside the system. Should this occur, the system
may not operate properly. In this case, remove
the disc and leave the system turned on for
about half an hour until the moisture evaporates.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
WARNING.......................................................................................................... 2
Welcome! ........................................................................................................... 3
Precautions........................................................................................................ 4
About this Manual .............................................................................................. 7
This system Can Play the Following Discs ........................................................ 7
Notes about the Discs........................................................................................ 9
Note on DVD 5-disc changer with EXCHANGE mechanism ........................... 10
Index to Parts and Controls ............................................................................. 11
Guide to the Control Menu Display (Magic Pad) .............................................. 15
Getting Started ................................................................ 17
Quick Overview................................................................................................ 17
Unpacking ........................................................................................................ 17
Inserting Batteries into the Remote ................................................................. 18
Step 1: Speaker System Hookup ..................................................................... 18
Step 2: Antenna Hookups ................................................................................ 21
Step 3: TV and Video Component Hookups .................................................... 23
Speaker Setup ................................................................................................. 25
Presetting Radio Stations ................................................................................ 30
Playing Discs.................................................................. 32
Playing Discs ................................................................................................... 32
Resuming Playback from the Point Where You Stopped the Disc
(Resume Play) ........................................................................................... 34
Using the DVD’s Menu..................................................................................... 35
Playing VIDEO CDs with PBC Functions (PBC Playback) .............................. 36
Selecting the Disc Mode (One Disc or All Discs) ............................................. 37
Creating Your Own Programme (Programme Play) ......................................... 37
Playing in random order (Shuffle Play) ............................................................ 39
Playing repeatedly (Repeat Play) .................................................................... 40
Searching for a Scene ....................................................... 41
Searching for a Particular Point on a Disc (Scan, Slow-motion Play) .............. 41
Searching for a Title/Chapter/Track/Index/Scene............................................. 42
Viewing Information About the Disc ....................................... 44
Viewing the Playing Time and Remaining Time on the Front Panel Display .... 44
Checking the Playing Time and Remaining Time ............................................ 45
continued
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustments........................................................... 47
Changing the Sound ........................................................................................ 47
Selecting a Sound Field................................................................................... 49
Adjusting the level parameters......................................................................... 51
Enjoying Movies .............................................................. 52
Changing the Angles ....................................................................................... 52
Displaying the Subtitles ................................................................................... 53
Checking the Play Information (ADVANCED) .................................................. 54
Using Various Additional Functions ....................................... 55
Locking Discs (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) ... 55
Other Operations ............................................................. 60
Controlling the TV with the Supplied Remote .................................................. 60
Watching the Video or other Unit ..................................................................... 61
Listening to the Radio ...................................................................................... 62
Using the Radio Data System (RDS) (Only for the European models) ........... 63
Naming Preset Stations ................................................................................... 63
Settings and Adjustments ................................................... 65
Using the Setup Display .................................................................................. 65
Setting the Display or Sound Track Language (LANGUAGE SETUP) ............. 66
Settings for the Display (SCREEN SETUP)..................................................... 67
Custom Settings (CUSTOM SETUP)............................................................... 68
Settings for the Speakers (SPEAKER SETUP) ............................................... 69
Additional Information....................................................... 73
Troubleshooting ............................................................................................... 73
Self-diagnosis Function (When letters/numbers appear in the display) ........... 76
Glossary .......................................................................................................... 76
Specifications................................................................................................... 79
Language Code List......................................................................................... 81
DVD Setup Menu List ...................................................................................... 82
Index ................................................................................................................ 83
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Terms for discs
About this Manual
• Title
The longest sections of a picture or a
music piece on a DVD; a movie, etc., for a
picture piece on a video software; or an
album, etc., for a music piece on an audio
software. Each title is assigned a title
number enabling you to locate the title you
want.
• Instructions in this manual describe the
controls on the remote. You can also use
the controls on the system if they have the
same or similar names as those on the
remote.
• The icons used in this manual are
explained below:
• Chapter
Sections of a picture or a music piece that
are smaller than titles. A title is composed
of several chapters. Each chapter is
assigned a chapter number enabling you to
locate the chapter you want. Depending on
the disc, no chapters may be recorded.
• Track
Sections of a picture or a music piece on a
VIDEO CD, SACD, or CD. Each track is
assigned a track number enabling you to
locate the track you want.
Icon
Meaning
Icon
Meaning
Functions
available in
DVD video
mode
Functions
available in
SACD
(Super
Audio CD)
and Audio
CD mode
Functions
available in
VIDEO
More
convenient
features
z
CD mode
Disc
• In this manual, the European model is used
for illustration and OSD purposes.
DVD
structure
Title
Chapter
Track
Disc
VIDEO CD,
SACD, or
CD
This system Can Play the
Following Discs
structure
Index
• Index (SACD, CD) / Video Index
(VIDEO CD)
Format of discs
A number that divides a track into sections
to easily locate the point you want on a
VIDEO CD, SACD, or CD. Depending on
the disc, no indexes may be recorded.
• Scene
On a VIDEO CD with PBC functions
(page 36), the menu screens, moving
pictures and still pictures are divided into
sections called “scenes.” Each scene is
assigned a scene number enabling you to
locate the scene you want.
DVD VIDEO
Super Audio CD
VIDEO CD
Music CD
The “DVD VIDEO” logo is a trademark.
continued
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on PBC (Playback Control)
(VIDEO CDs)
Examples of discs that the system
cannot play
This system conforms to Ver. 1.1 and Ver.
2.0 of VIDEO CD standards. You can enjoy
two kinds of playback depending on the disc
type.
The system cannot play the following discs:
• CD-ROMs (PHOTO CDs included)
• All CD-Rs other than music and VCD
format CD-Rs
• Data part of CD-Extras
• DVD-ROMs
• DVD Audio discs
• A DVD with a different region code (page
8, 77).
Disc type
You can
VIDEO CDs
without PBC
functions
Enjoy video playback
(moving pictures) as well
as music.
(Ver. 1.1 discs)
• A disc that has a non-standard shape (e.g.,
card, heart)
VIDEO CDs
with PBC
Play interactive software
using menu screens
functions
(Ver. 2.0 discs)
displayed on the TV screen
(PBC Playback), in
addition to the video
playback functions of Ver
1.1 discs. Moreover, you
can play high-resolution
still pictures, if they are
included on the disc.
• A disc with paper or stickers on it.
• A disc that has the adhesive, cellophane
tape, or a sticker still left on it.
Note
Some CD-Rs or CD-RWs cannot be played on this
system depending upon the recording quality or
physical condition of the disc, or the characteristics
of the recording device.
Furthermore, the disc will not play if it has not been
correctly finalized. For more information, see the
operating instructions for the recording device.
Region code
Your system has a region code printed on
the back of the unit and will only play
DVDs labelled with the same region code.
Note on playback operations of
DVDs and VIDEO CDs
Some playback operations of DVDs and
VIDEO CDs may be intentionally set by
software producers. Since this system plays
DVDs and VIDEO CDs according to the
disc contents the software producers
designed, some playback features may not
be available. Also, refer to the instructions
supplied with the DVDs or VIDEO CDs.
ALL
DVDs labelled
system.
will also play on this
If you try to play any other DVD, the
message “Playback prohibited by area
limitations.” will appear on the TV screen.
Depending on the DVD, no region code
indication may be labelled even though
playing the DVD is prohibited by area
restrictions.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyrights
Notes about the Discs
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents, other
intellectual property rights owned by
Macrovision Corporation, and other rights
owners. Use of this copyright protection
technology must be authorized by
On handling discs
• To keep the disc clean, handle the disc by
its edge. Do not touch the surface.
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave
it in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
engineering or disassembly is prohibited.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a
cleaning cloth.
Wipe the disc from the centre out.
• Do not use solvents such as benzine,
thinner, commercially available cleaners,
or anti-static spray intended for vinyl LPs.
This system incorporates Dolby* Digital,
Pro Logic Surround, and the DTS** Digital
Surround System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol
are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992-1997
Dolby Laboratories. All rights reserved.
**Manufactured under license from Digital Theater
Systems, Inc. US Pat. No. 5,451,942 and other
worldwide patents issued and pending. “DTS” and
“DTS Digital Surround” are trademarks of Digital
Theater Systems, Inc. © 1996 Digital Theater
Systems, Inc. All rights reserved.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on DVD 5-disc
changer with EXCHANGE
mechanism
You can change other discs while playing a
disc (EXCHANGE mechanism).
Disc changer system
Stocker
1
2
Disc
tray
4
4
5
3
Playing unit
The disc changer consists of a playing
unit, trays which hold the discs, and a
stocker which transports the discs on
their trays to the disc slot and the
playing unit.
For example, if you press DISC 3, the
stocker moves until the DISC 3 tray
comes to the position of the playing unit
and then moves the DISC 3 tray over the
playing unit. If you press A of DISC 4
while playing DISC 3, the stocker leaves
the DISC 3 tray over the playing unit,
moves so that the DISC 4 tray comes to
the position of the disc cover, opens the
disc cover and pushes out the DISC 4
tray (EXCHANGE mechanism).
Note
Noise may come from the disc changer when
changing discs or turning the system on and off.
However, this is just noise produced by the
operation of the internal mechanisms and does
not indicate a malfunction.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Controls
For more information, refer to the pages indicated in parentheses.
Front Panel
1 POWER switch/indicator (32)
2 DISC 1 (play) / A (open/close)-DISC 5
(play) / A (open/close) (32)
3 Front panel display (12)
4 ./> PREV/NEXT, PRESET +/–
(30, 33)
8 PHONES jack (32)
9 VOLUME control (32)
q; SOUND FIELD +/– (49)
qa DISPLAY (49, 62)
qs BAND (30)
qd FUNCTION (61)
qf (remote sensor) (18)
qg Disc tray (32)
5 H (play) (32)
6 X (pause) (33)
7 x (stop) (32)
continued
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Display
When playing back a DVD
Playing Current title
Disc mode
status number
Current chapter number
Current sound
ALL1DISC S AUTO
PRO LOGIC
DIGITAL FM AM
NTSC PBC ANGLE
TITLE
TRACK
CHAPTER INDEX
H TUNED
M MONO ST S
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
Current
surround
format
Lights up when you
can change the angle
Playing time
Current play mode
When playing back a SACD, CD, or VIDEO CD
Current index number
Current track (The index indicator does not
number appear during SACD playback.)
Current sound
Disc mode
ALL1DISC S AUTO
PRO LOGIC
DIGITAL FM AM
NTSC PBC ANGLE
TITLE
TRACK
CHAPTER INDEX
H TUNED
M MONO ST S
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
Lights up during Playing status
PBC playback
Playing time
Current play mode
(VIDEO CD only)
When listening to the radio
Preset number
Monaural/Stereo effect
ALL1DISC S AUTO
PRO LOGIC
TITLE
TRACK
INDEX
H TUNED
M MONO ST S
CHAPTER
dB REPEAT
1
DIGITAL FM AM
kHz PROGRAM
MHz SHUFFLE
NTSC PBC ANGLE
Current band
Current station
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
VIDEO IN
AUDIO IN
V
A
I
D
E
O
O
O
U
T
VIDEO IN
AUDIO IN
S
V
I
D
E
O
(DVD ONLY)
AM
U
D
I
OUT
Y
P
B
/ B - Y
P
R
/ R - Y
L
L
O
P
T
I
C
A
L
DIGITAL
VIDEO
DIGITAL
IN
(CD ONLY)
COAXIAL
R
DIGITAL
OUT
MONITOR OUT
COMPONENT VIDEO OUT
R
FM
FRONT
R
CENTER
FRONT
L
75Ω
VIDEO
1
VIDEO 2
REAR
R
WOOFER
REAR
L
S P E A K E R
1 AM antenna (21)
6 MONITOR OUT (VIDEO/S VIDEO)
2 VIDEO 1 jacks (23)
jacks (23)
3 VIDEO 2 jacks (23)
4 DIGITAL IN (OPTICAL) jack (24)
7 COMPONENT VIDEO OUT jacks (23)
8 SPEAKER jacks (19)
5 DIGITAL OUT (OPTICAL) jack
9 FM 75Ω COAXIAL antenna jack (22)
continued
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1 TV [/1 (on/standby) (60)
2 OPEN/CLOSE (32)
3 NAME (63)
Remote
4 STEREO/MONO (62)
5 MEMORY (30)
6 CLEAR (37)
7 PLAY MODE (37)
8 AUDIO (47)
9 ANGLE (52)
q; SUBTITLE (53)
qa VOL +/– (62)
qs ./> PREV/NEXT, TV/PRESET
+/– (30, 33)
1
4
7
2
5
3
6
9
8
>
10
10/0
qd H PLAY/SELECT (32)
qf TITLE (35)
qg DVD DISPLAY (37)
qh C/X/x/c/ENTER (26)
qj DVD SETUP (56)
qk 1 (standby) (32)
ql DISC SKIP (32)
w; TV/VIDEO (60)
wa REPEAT (40)
ws MUTING (33)
wd TIME (45)
wf FUNCTION (61)
wg BAND (30)
wh Number buttons (35)
wj SOUND FIELD (49)
wk DISPLAY (49, 62)
wl ENTER (60)
Note
This remote control glows in the dark. However,
before glowing, the remote must be exposed to light
for awhile.
e; CONTROL DVD/TV switch (60)
ea m/M/
/
SLOW, TUNING +/–
(30, 41)
es x STOP (32)
ed X PAUSE (33)
ef DVD MENU (35)
eg O RETURN (36)
eh AMP MENU (26)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Control Menu Display (Magic Pad)
Use the Control Menu to select a function that you’d like to use. The Control Menu display
appears when the DVD DISPLAY button is pressed. For details, refer to the page in
parentheses.
Control Menu
Total number of titles or tracks recorded
Total number of chapters or indexes recorded
Current playing title number (Video
Playback status
(NPlayback, XPause, xStop, etc.)
CD/SACD/CD: track number)
Current playing chapter
number (Video CD/SACD/CD:
index number)
(
)
)
1 2 2 7
(
1 8 3 4
DVD
Type of disc being
played back
T
1 : 3 2 : 5 5
Playing time
Icon of selected
Control Menu item
Current setting
OFF
OFF
1: ENGLISH
2: FRENCH
3: SPANISH
Control Menu items
Options
SUBTITLE
Select:
Function name of selected
Control Menu item
ENTER
RETURN
Cancel:
Operation message
List of Control Menu Items
Selects the title (DVD), the scene (VIDEO
CD in PBC playback), or the track
(VIDEO CD) to be played.
TITLE (DVD only) (page 42)/
SCENE (only VIDEO CD in PBC
playback) (page 42)/TRACK (VIDEO CD
only) (page 42)
CHAPTER (DVD only) (page
Selects the chapter (DVD) or the index
(VIDEO CD) to be played.
42)/INDEX (VIDEO CD only) (page 42)
TRACK (SACD/CD only)
(page 42)
Selects the track (SACD/CD) to be played.
Selects the index (SACD/CD) to be played.
INDEX (SACD/CD only) (page 42)
TIME/TEXT (page 42)
Checks the elapsed time and the remaining
playback time.
Inputs the time code for picture and music
searching.
Displays the DVD or the SACD/CD text.
Changes the audio setting.
AUDIO (page 47)
continued
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBTITLE (DVD only) (page
Displays the subtitles.
Changes the subtitle language.
53)
ANGLE (DVD only) (page 52)
REPEAT (page 40)
Changes the angle.
Plays the entire disc (all titles/all tracks)
repeatedly, or one title/chapter/track
repeatedly.
ONE/ALL DISCS (page 37)
ADVANCED (DVD only)
Selects play mode on one disc or all discs.
Checks the information (bit rate or layer)
on the disc while playing a DVD.
(page 54)
CUSTOM PARENTAL
Sets the disc to prohibit playing.
CONTROL (page 55)
SETUP (page 65)
CUSTOM Setup
By using the Setup Display, you can make
various adjustments to items such as
picture and sound. You can also set a
language for the subtitles and the Setup
Display, among other things.
RESET
Returns the settings in “SETUP” to the
default setting.
z Each time you press DVD DISPLAY, the Control Menu display changes as follows:
Control Menu display
m
,
ADVANCED display (Appears if you select any setting other than “OFF.” See page 54.)
m
Control Menu display off
The Control Menu items are different depending on the disc.
z The Control Menu icon indicator lights up in green
t
when you select “REPEAT” except
“OFF.” The “ANGLE” indicator lights up in green only when the angles can be changed.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Quick Overview
This chapter presents a quick overview so you can begin enjoying your new system right away.
For selecting a language used in the on-screen display, refer to the page 66.
For selecting the aspect ratio of the TV to be connected, refer to the page 67.
Unpacking
Check that you have the following items:
• Speakers (5)
• Subwoofer (1)
• AM loop antenna (1)
• FM wire antenna (1)
• Speaker cords (5m × 4, 15m × 2) (16ft. × 4, 49ft. × 2)
• Video cord (1)
• Remote commander (remote) RM-SS900 (1)
• R6 (size AA) batteries (2)
• Foot pads (15)
• Speakers-connection and Installation (card) (1)
• Quick reference for Remote commander (card) (1)
• 21-pin adaptor (1) (only for the European models)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Batteries into the Remote
You can control the system using the supplied remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries to the markings inside the compartment. When
using the remote, point it at the remote sensor on the system.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
Step 1: Speaker System Hookup
Connect the supplied speaker system using the supplied speaker cords by matching the colours
of the terminals to those of the cords. Do not connect any speakers other than those supplied
with this system.
To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.)
on page 25.
Required cords
Speaker cords
The connector and the colour tube of the speaker cords are the same colour as the label of the
terminals to be connected.
Grey
(+)
(+)
(–)
(–)
Colour tube
Black
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminals for connecting the speakers
Connect the
Front speakers
Rear speakers
Centre speaker
Subwoofer
To the
SPEAKER FRONT L (white) and R (red) terminals
SPEAKER REAR L (blue) and R (grey) terminals
SPEAKER CENTER (green) terminal
SPEAKER WOOFER (purple) terminal
Front speaker (R)
Front speaker (L)
Centre speaker
Colour
label
VIDEO IN
AUDIO IN
V
A
I
D
E
O
O
O
U
T
VIDEO IN
AUDIO IN
S
V
I
D
E
O
(DVD ONLY)
AM
U
D
I
OUT
Y
P
B
/ B - Y
P
R
/ R - Y
L
L
O
P
T
I
C
A
L
DIGITAL
(CD ONLY)
DIGITAL
IN
VIDEO
COAXIAL
R
DIGITAL
OUT
MONITOR OUT
FRONT
COMPONENT VIDEO OUT
R
FM
FRONT
R
CENTER
L
75Ω
VIDEO 2
VIDEO
1
REAR
R
WOOFER
REAR
L
S P E A K E R
Subwoofer
Rear speaker (R)
Rear speaker (L)
Note on placing speakers
Use caution when placing the subwoofer or a speaker stand (not supplied) that is attached with
the front/rear speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or
discoloration may result.
continued
19
Download from Www.Somanuals.com. All Manuals Search And Download.
To avoid short-circuiting the speakers
Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does
not touch another speaker terminal or the bare wire of another speaker cord.
Examples of bad conditions of the speaker cord
Exposed end speaker cord
is touching another speaker
terminal.
Exposed end cords are
touching each other due to
sloppy removal of insulation.
After connecting all the components, speakers, and AC power cord (mains lead), output a test
tone to check that all the speakers are connected correctly. For details on outputting a test tone,
see page 28.
If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a
speaker other than the one currently displayed on the front panel display, the speaker may be
short-circuited. If this happens, check the speaker connection again.
Notes
• Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the
cords are reversed, the sound will be distorted and will lack bass.
• If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output
on the speakers.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Antenna Hookups
Connect the supplied AM/FM antennas for listening to the radio.
Terminals for connecting the antennas
Connect the
To the
AM loop antenna
FM wire antenna
AM terminals
FM 75Ω COAXIAL terminal
AM loop antenna
FM wire antenna
VIDEO IN
AUDIO IN
V
A
I
D
E
O
O
O
U
T
VIDEO IN
AUDIO IN
S
V
I
D
E
O
(DVD ONLY)
AM
U
D
I
OUT
Y
P
B
/ B - Y
P
R
/ R - Y
L
L
O
P
T
I
C
A
L
DIGITAL
DIGITAL
IN
(CD ONLY)
VIDEO
COAXIAL
R
DIGITAL
OUT
MONITOR OUT
COMPONENT VIDEO OUT
R
FM
FRONT
R
CENTER
FRONT
L
75Ω
VIDEO
1
VIDEO 2
REAR
R
WOOFER
REAR
L
S P E A K E R
Notes
• To prevent noise pickup, keep the AM loop antenna away from the system and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
• When you connect the supplied AM loop antenna, connect the black cord (B) to the U terminal, and the white
cord (A) to the other terminal. (Only for the US models)
A
AM
B
continued
21
Download from Www.Somanuals.com. All Manuals Search And Download.
z If you have poor FM reception
Use a 75-ohm coaxial cable (not supplied) to connect the system to an outdoor FM antenna as shown below.
System
Outdoor FM antenna
Earth wire (not
supplied)
AM
COAXIAL
FM
75Ω
To earth
Note
If you connect the system to an outdoor antenna, ground it to protect against lightning. To prevent a gas explosion,
do not connect the earth wire to a gas pipe.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: TV and Video Component Hookups
Required cords
Video cord for connecting a TV monitor
Yellow
Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the colour-coded pins to the appropriate jacks on the
components.
Yellow (Video)
White (L/audio)
Red (R/audio)
Yellow (Video)
White (L/audio)
Red (R/audio)
Jacks for connecting video components
Connect a
TV monitor
To the
MONITOR OUT jack
VIDEO 1 jacks
VIDEO 2 jacks
VCR
Digital satellite receiver
z When using the S-video jack instead of the video jacks
Your TV monitor must also be connected via an S-video jack. S-video signals are on a separate bus from the video
signals and will not be output through the video jacks.
z When you are connecting the monitor, projector, or AV amplifier (receiver) having component
video input jacks (Y, PB, PR)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or
three video cords (not supplied) of the same kind and length. You will enjoy accurate colour reproduction and high
quality images.
Notes
• When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but not
from the VIDEO 1 VIDEO OUT and AUDIO OUT L/R jacks.
• When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH
STEREO mode, the line outputs may not function properly.
continued
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO IN
AUDIO IN
V
A
I
D
E
O
O
O
U
T
VIDEO IN
AUDIO IN
S
V
I
D
E
O
(DVD ONLY)
AM
U
D
I
OUT
Y
P
B
/ B - Y
P
R
/ R - Y
L
L
O
P
T
I
C
A
L
DIGITAL
DIGITAL
IN
(CD ONLY)
VIDEO
COAXIAL
R
DIGITAL
OUT
MONITOR OUT
COMPONENT VIDEO OUT
R
FM
FRONT
R
CENTER
FRONT
L
75Ω
VIDEO
1
REAR
R
WOOFER
REAR
L
S P E A K E R
IN
OUT
OUT
OUT
IN
IN
COMPOMENT
VIDEO IN
Y
INPUT
VIDEO
IN
VIDEO
IN
VIDEO
OUT
VIDEO
OUT
AUDIO
IN
AUDIO
OUT
AUDIO
OUT
P
P
B
R
/ B - Y
/ R - Y
L
L
OUTPUT
R
R
OPTICAL
Digital satellite receiver
TV monitor
Equipment with component
video input jacks
VCR
If you connect a digital satellite receiver with the OPTICAL jack
The digital satellite receiver can be connected to the OPTICAL jack instead of the VIDEO IN
and AUDIO IN L/R jacks of the system.
The system can accept both the digital and analog signals. Digital signals have priority over
analog signals. If the digital signal ceases, the analog signal will be processed after 2 seconds.
If you connect a digital satellite receiver without the OPTICAL jack
Connect the digital satellite receiver to the VIDEO IN and AUDIO IN L/R jacks only of the
system.
Setup for the system (for Asian and Australian models)
Setup is necessary for the system, depending on the TV monitor to be connected.
The initial setting for Asian models is NTSC but Australian models is PAL.
If the colour system of the TV is PAL*
To set the system to PAL, turn on the system by pressing 1 (power) on the remote while
pressing X (pause) button on the system. You need to hold the X button until DAV-C700
appears on the display. To reset to NTSC, turn off the system and then turn on again using the
remote while pressing the X button on the system.
*If the colour system of the TV is NTSC, do the same operation above to set the system to
NTSC.
Connecting the AC Power Cord (mains lead)
Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains),
connect the speakers to the system (see page 18).
Connect the AC power cord (mains lead) of your TV/video components to a wall outlet (mains).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Setup
For the best possible surround sound, all the speakers other than the subwoofer should be the
same distance from the listening position (A).
However, if necessary, this system allows you to place the centre speaker up to 1.6 meters (5
feet) closer (B) and the rear speakers up to 4.6 meters (15 feet) closer (C) to the listening
position.
The front speakers can be placed from 1.0 to 15.0 meters (3 to 50 feet) (A) from the listening
position.
You can place the subwoofer in any position.
You can place the rear speakers either behind you or to the side, depending on the shape of your
room, etc.
When the rear speakers are placed to the side
When the rear speakers are placed behind you
B
B
A
A
A
A
45°
45°
C
C
C
C
90°
90°
20°
20°
Note
Do not place the centre and rear speakers farther away from the listening position than the front speakers.
Specifying the speaker parameters
To obtain the best possible surround sound, first specify the distance of the speakers from your
listening position, then set the balance and level. Use the test tone to adjust the speaker volumes
to the same level.
You may adjust the speaker parameters using SPEAKER SETUP in the setup display (page 69).
continued
25
Download from Www.Somanuals.com. All Manuals Search And Download.
1
4
7
2
5
3
6
9
8
>
10
10/0
C/X/x/c/ENTER
AMP MENU
To specify the size, distance, position and height of the speakers
1 Press AMP MENU repeatedly to display 9 SP. SETUP on the front panel display.
2 Sit in your listening position and select the item to be set using X/x.
• Items set in 9 SP. SETUP
–Size of the rear and centre speakers
–Distance of the front, rear, and centre speakers
–Position and height of the rear speakers
3 Set the parameter using C/c.
The selected parameter will appear on the front panel display.
4 Repeat Steps 2 and 3 to set other parameters in 9 SP. SETUP.
If you do not operate the remote for a few seconds, the parameter turns off and is stored in
the system.
xSIZE
When you do not connect centre or rear speakers, or move the rear speakers, set the parameters
for CENTER and REAR. Since the front speaker and subwoofer settings are fixed, you cannot
change them. The default settings are underlined.
• CENTER (centre speaker)
–YES: Normally select this.
–NO: Select this if no centre speaker is used.
• REAR (rear speakers)
–YES: Normally select this. Specify the position and height to implement the Digital Cinema
Surround modes in the “Virtual” sound field (page 49) properly.
–NO: Select this if no rear speaker is used.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
xDISTANCE
You can vary the distance of each speaker as follows. The default adjustments are in
parentheses.
• F. D. 5 m (17 ft) (front speakers distance)
Front speaker distance can be set in 0.2 m (1 foot) steps from 1.0 to 15.0 m (3 to 50 feet).
• C. D. 5 m (17 ft) (centre speaker distance)
Centre speaker distance can be set in 0.2 m (1 foot) steps from the front speaker distance to
1.6 m (5 feet) closer to your listening position.
• R. D. 3.4 m (12 ft) (rear speakers distance)
Rear speaker distance can be set in 0.2 m (1 foot) steps from a distance equal to the front
speaker distance to a distance 4.6 m (15 feet) closer to your listening position.
Notes
• If each of the front or rear speakers are not placed an equal distance from your listening position, set the distance
of the closest speaker.
• In SPEAKER SETUP, the North American model's OSD displays both metric and imperial measurements.The
other model's displays metric measurements only. The manual also shows both.
Specifying the rear speaker position and height
If you select anything other than “NONE” in “REAR,” specify the position and height of the
rear speakers. The default settings are underlined.
Position diagram
90
A
A
45
B
B
20
• R. P. BEHIND
Select this if the rear speakers are located in the section B.
• R. P. SIDE
Select this if the rear speakers are located in the section A.
continued
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Height diagram
C
D
C
D
60
30
• R. H. LOW
Select this if the rear speakers are located in the section D.
• R. H. HIGH
Select this if the rear speakers are located in the section C.
These parameters are not available when “REAR“ is set to “NO”.
To specify the balance and level of the speakers
1 Press AMP MENU repeatedly to display 9 LEVEL on the front panel display.
2 Using X/x to select T.TONE and use C/c to set T.TONE to ON.
You will hear the test tone from each speaker in sequence.
3 Sit in your listening position and select the item to be adjusted using X/x.
• Items adjusted in 9 LEVEL
–Balance of the front and rear speakers
–Volume level of the centre and rear speakers and subwoofer
4 Adjust the volume level so that the volume of the test tone from each speaker sounds the
same using C/c.
The adjusted value will appear on the front panel display.
5 Repeat Steps 3 and 4 to adjust other parameters in 9 LEVEL.
If you do not operate the remote for a few seconds, the value disappears from the display
and is stored in the system.
6 Using X/x to select T.TONE and use C/c to set T.TONE to OFF.
xBALANCE
You can vary the balance of each speaker as follows. The default adjustments are in the
parentheses.
• F ___I___ (centre) (front speakers)
Adjust the balance between the front left and right speakers (You can adjust from centre,
6 steps left or right).
• R ___I___ (centre) (rear speakers)
Adjust the balance between the rear left and right speakers (You can adjust from centre,
6 steps left or right).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
xLEVEL
You can vary the level of each speaker as follows. The default adjustments are in parentheses.
• C. LEVEL (0 dB) (centre speaker level)
Adjust the level of the centre speaker (–6 dB to +6 dB, 1 dB steps).
• R. LEVEL (0 dB) (rear speakers level)
Adjust the level of the rear speakers (–6 dB to +6 dB, 1 dB steps).
• S. W. LEV. (0 dB) (subwoofer level)
Adjust the level of the subwoofer (–6 dB to +6 dB, 1 dB steps).
Notes
• When you select an item, the sound cuts off for a moment.
• Depending on the settings of other speakers, the subwoofer may output excessive sound.
To adjust the volume of all the speakers at one time
Use the VOLUME control.
Other AMP MENU settings
You can control the brightness of the front panel display, clear the preset stations and the station
names, and set the speaker parameters back to the default setting. Press AMP MENU repeatedly
to display 9 CUSTOMIZE. Use X/x to select the following items.
xDIMMER
You can change the brightness of the front panel display by two steps.
xMEMO. CLR.
• N (No): Skip back to previous menu.
• Y (Yes): If you select Y by pressing ENTER, “Really? N” and “Really? Y” appears.
If you select “Really? Y,” by pressing ENTER, “ALL CLEAR!” is displayed and all settings
such as preset stations and station names will be cleared, and speaker parameters will be
defaulted.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting Radio Stations
You can preset 20 stations for FM and 10 stations for AM.
Before tuning, make sure to turn down the volume to minimum.
MEMORY
1
4
7
2
5
3
6
9
BAND
8
>
10
10/0
PRESET +/–
TUNING +/–
ENTER
1 Press BAND repeatedly until the band you want appears on the front panel
display.
Every time you press BAND, the band changes to AM or FM alternately.
2 Press and hold TUNING + or – until the frequency indication starts to change,
then release.
Scanning stops when the system tunes in a station. “TUNED” and “ST” (for stereo
programme) appear on the front panel display.
ALL1DISC S AUTO
PRO LOGIC
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M
MONO ST S
dB REPEAT
1
DIGITAL FM AM
kHz PROGRAM
MHz SHUFFLE
NTSC PBC ANGLE
3 Press MEMORY.
A preset number appears on the front panel display.
ALL1DISC S AUTO
PRO LOGIC
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M
MONO ST S
dB REPEAT
1
DIGITAL FM AM
kHz PROGRAM
MHz SHUFFLE
NTSC PBC ANGLE
4 Press PRESET + or – to select the preset number you want.
ALL1DISC S AUTO
PRO LOGIC
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M
MONO ST
S
dB REPEAT
1
DIGITAL FM AM
kHz PROGRAM
MHz SHUFFLE
NTSC PBC ANGLE
30
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press ENTER.
The station is stored.
ALL1DISC S AUTO
PRO LOGIC
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
DIGITAL FM AM
kHz PROGRAM
MHz SHUFFLE
NTSC PBC ANGLE
v
ALL1DISC S AUTO
PRO LOGIC
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M
MONO ST S
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
DIGITAL FM AM
NTSC PBC ANGLE
6 Repeat 1 to 5 to store other stations.
To tune in a station with a weak signal
Press TUNING + or – repeatedly in 2 to tune in the station manually.
To change the preset number
Start over from 1.
To change the AM tuning interval (except for European, Middle Eastern, and
Philippine models)
The AM tuning interval is factory set to 9 kHz (10 kHz in some areas).
To change the AM tuning interval, tune in any AM station first, then turn off 1 on the remote.
While holding down x (on the system), turn the power back on. When you change the interval,
AM preset stations will be erased.
To reset the interval, repeat the same procedure.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
4
Press A of DISC 1-DISC 5 on the
system or OPEN/CLOSE on the
remote, and place a disc on the
disc tray.
Playing Discs
Depending on the DVD or VIDEO CD,
some operations may be different or
restricted.
The system automatically turns on and
the power indicator turns off.
Refer to the operating instructions supplied
with your disc.
H
POWER DISC 1 / A-DISC 5 / A
x
Power indicator
With the playback side facing down
Press A of the same disc tray number
to close the disc tray.
Press other A of DISC 1-DISC 5 to
place other discs.
Adjust the volume Connect
headphones
5
Press H.
The system starts playback
(continuous play) of the disc whose
disc tray indicator is green.
To playback other discs, press DISC
SKIP on the remote or DISC 1-DISC 5
of the system.
OPEN/
CLOSE
1
DISC SKIP
1
4
7
2
5
3
6
9
8
>
10
10/0
Adjust the volume on the system.
x
H
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions
on the menu. DVD (page 35), VIDEO CD
(page 36).
1
2
Turn on your TV.
Switch the input selector on the TV
to this system.
To turn on the system
Press POWER on the system. The system
enters standby mode and the power indicator
lights up in red. Press 1 on the remote. The
system turns on and the power indicator
turns off. In standby mode, the system also
turns on by pressing A on the system or by
pressing H.
3
Press POWER on the system.
The system enters standby mode and
the power indicator lights up in red.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the system
Additional operations
Press 1 on the remote. The system enters
standby mode and the power indicator lights
up in red. To turn off the system completely,
press POWER on the system. While playing
a disc, do not turn off the system by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the system, first
press x to stop playback and then press 1
on the remote.
OPEN/CLOSE
DISC SKIP
MUTING
1
4
7
2
5
3
6
9
8
>
10
10/0
z On Auto-Function
./>
H
If a disc is already placed on any disc tray, you can
play it back simply by pressing the H or its
corresponding DISC 1-DISC 5, even if the previous
music source was not a DVD. The function changes
to DVD and playback starts (Auto-Function).
However, if Programme Play is on, you can only start
playback by pressing the H.
x
X
To
Operation
Press x.
Stop
z On the disc tray indicators
The disc tray indicators change their colors as
follows:
– green: the disc tray is chosen, or the disc is being
play backed.
– off: there is no disc.
– orange: a disc is placed on the disc tray, however,
the disc tray is not chosen.
Pause
Press X.
Resume play after
pause
Press X or H.
Go to the next chapter,
track, or scene in
continuous play mode
Press >.
Go back to the
Press ..
preceding chapter, track,
or scene in continuous
play mode
Stop play and remove
the disc
Press OPEN/CLOSE.
Mute the sound
Press MUTING. To
cancel muting, press it
again or turn up the
volume.
Change a disc while
playing another disc
Press DISC SKIP.
Notes
• Do not push the disc tray when closing it. Press
OPEN/CLOSE to close the disc tray.
• If there is no disc in any disc tray, “NO DISC”
appears on the front panel display.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Resuming Playback from
the Point Where You
Stopped the Disc (Resume Play)
• Depending on where you stopped the disc, the
system may not resume playback from exactly the
same point.
• The point where you stopped playing is cleared
when:
– you turn the power off by pressing POWER on
the system.
– you change the play mode.
When you stop the disc, the system
remembers the point where you pressed x
and “RESUME” appears on the front panel
display. As long as you do not open the disc
tray, Resume Play will work even if the
system enters standby mode by pressing 1.
>
10
10/0
x
H
1
2
While playing a disc, press x to
stop playback.
“RESUME” appears on the front panel
display, so you can restart the disc
from the point where you stopped the
disc.
If “RESUME” does not appear,
Resume Play is not available.
Press H.
The system starts playback from the
point where you stopped the disc in
Step 1.
z To play from the beginning of the disc, press x
twice, then press H.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD menu
Using the DVD’s Menu
Some DVDs allow you to select the disc
contents using a menu. When you play these
DVDs, you can select items such as the
language for the subtitles and the language
for the sound using the DVD menu.
Some discs have a “title menu” or a “DVD
menu.” On some DVDs, this may simply be
called a “menu” or “title.”
Using the title menu
Number
buttons
1
4
7
2
5
3
6
9
A DVD is divided into long sections of a
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you
want using the title menu.
8
>
10
10/0
DVD MENU
C/X/x/c
ENTER
1
4
7
2
5
3
6
9
Number
buttons
8
>
10
10/0
1 Press DVD MENU.
The DVD menu appears on the TV
screen. The contents of the menu vary
from disc to disc.
C/X/x/c
TITLE
ENTER
2 Press C/X/x/c or the number buttons
to select the item you want to change.
3 To change other items, repeat Step 2.
1 Press TITLE.
4 Press ENTER.
The title menu appears on the TV
screen.
The contents of the menu vary from disc
to disc.
2 Press C/X/x/c or the number buttons
to select the title you want to play.
3 Press ENTER.
The system starts playing the selected
title.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
To go back to the menu
Playing VIDEO CDs with
PBC Functions (PBC Playback)
Press O RETURN.
z To play without using PBC, press ./> or
the number buttons while the system is stopped to
select a track, then press H or ENTER.
“Play without PBC” appears on the TV screen and
the system starts continuous play. You cannot play
still pictures such as a menu. To return to PBC
playback, press x twice then press H.
With PBC (Playback Control) functions,
you can enjoy simple interactive operations,
search functions, and other such operations.
PBC playback allows you to play VIDEO
CDs interactively by following the menu on
the TV screen.
Note
Depending on the VIDEO CD, “Press ENTER” in
Step 3 may appear as “Press SELECT” in the
instructions supplied with the disc. In this case, press
H.
1
4
7
2
5
3
6
9
Number
buttons
8
>
10
10/0
./>
H
x
O RETURN
ENTER
X/x
1
2
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
Select the item number you want
by pressing X/x or the number
buttons.
3
4
Press ENTER.
Follow the instructions in the
menu for interactive operations.
Refer to the instructions supplied with
the disc, as the operating procedure
may differ according to the VIDEO
CD.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Disc Mode
Creating Your Own
(One Disc or All Discs)
Programme (Programme Play)
Before setting Programme Play, Shuffle
Play, or Repeat Play, you need to select
whether to set those play modes on one disc
or all discs.
You can play the contents of a disc in the
order you want by arranging the order of the
titles, chapters or tracks on the disc to create
your own programme. You can programme
up to 25 titles, chapters, and tracks.
REPEAT
CLEAR
X/x
1
4
7
2
5
3
6
9
DVD
PLAY MODE
DISPLAY
ENTER
8
Number
buttons
>
10
10/0
H
1
2
In stop mode, press DVD DISPLAY.
X/x/c
ENTER
Press X/x to select
(ONE/
ALL DISCS), then press ENTER.
1
In stop mode, press PLAY MODE
repeatedly until “ PROGRAM”
appears on the front panel
display.
The programming display appears on
the TV screen.
(
)
)
1 2 2 7
(
DVD
1 8 3 4
C
0 1 : 3 2 : 5 5
ALL DISCS
ALL DISCS
ONE DISC
PROGRAM
–
– – – –
:
T
ALL
ALL CLEAR
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
1.
2.
3.
4.
xONE/ALL DISCS
5.
•ALL DISCS: allows you to set Programme
Play, Shuffle Play, or Repeat Play for all
the discs.
• ONE DISC: allows you to set Shuffle Play
or Repeat Play for 1 disc only.
6.
continued
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Next, press X/x or the number buttons
to select “03” under “C,” then press
ENTER.
2
3
Press ENTER, then press X/x to
select the disc.
PROGRAM
PROGRAM
–
– – – –
T
:
– – – –
:
3
T
ALL
ALL CLEAR
ALL
ALL CLEAR
–
–
1. DVD 0 2 0 3
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
1.
2.
3.
4.
5.
6.
– – – –
– – – –
– – – –
– – – –
– – – –
2.
3.
4.
5.
6.
Selected title and chapter
Press c.
The cursor moves to the title or track
(in this case, “01”).
xWhen playing a VIDEO CD or
CD
For example, select track “02.”
Press X/x or the number buttons to
select “02” under “T,” then press
ENTER.
Disc type*
Chapter
Title
PROGRAM
T
C
:
3
DVD
ALL
01
02
03
04
05
ALL
ALL CLEAR
Selected track
– – – –
1.
01
02
03
04
05
06
– – – –
– – – –
– – – –
– – – –
– – – –
2.
3.
4.
5.
6.
PROGRAM
–
– – – –
:
T
ALL
ALL CLEAR
–
1. CD
02
– – – –
– – – –
– – – –
– – – –
– – – –
2.
3.
4.
5.
6.
Chapters recorded on a disc
* “?” appears when the system has not loaded
the disc information in the memory.
xWhen playing a SACD
For example, select track “002.”
Press X/x or the number buttons to
select “002” under “T,” then press
ENTER.
4
Select the title, chapter, or track
you want to programme.
xWhen playing a DVD
For example, select chapter “03” of
title “02.”
Selected track
Press X/x or the number buttons to
select “02” under “T,” then press
ENTER.
PROGRAM
–
– – – –
:
T
ALL
ALL CLEAR
–
1. SACD 002
– – – –
– – – –
– – – –
– – – –
– – – –
2.
3.
4.
5.
6.
PROGRAM
3
T
C
:
DVD
ALL
ALL
ALL CLEAR
– – – –
1.
01
02
03
04
05
06
01
02
03
04
05
– – – –
2.
– – – –
– – – –
– – – –
– – – –
3.
4.
5.
6.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
To programme other discs, titles,
chapters, or tracks, repeat Step 2
to 4.
The programmed discs, titles, chapters,
and tracks are displayed in the selected
order.
Playing in random order
(Shuffle Play)
You can have the system “shuffle” titles,
chapters, or tracks and play them in random
order. Subsequent “shuffling” may produce
a different playing order.
Press H to start Programme
Play.
Programme Play begins.
When the programme ends, you can
restart the same programme again by
pressing H.
CLEAR
1
4
7
2
5
3
6
9
PLAY MODE
8
>
10
10/0
To return to normal play
Press CLEAR during playback.
H
To turn off the programme menu
In stop mode, press PLAY MODE to turn
off the programme menu.
1
2
In stop mode, press PLAY MODE
repeatedly until “ SHUFFLE”
appears on the front panel
display.
To change the programme
To change the disc, select the programme
number you want to change using X/x after
Step 1 or 4, then press ENTER.
To change the title, chapter, or track, select
the desired one in Step 4.
Press H.
To cancel the programmed order
To cancel all the titles, chapters, or tracks in
the programmed order, press X, and select
“ALL CLEAR” in Step 2. To cancel the
selected programme, select the programme
using X/x in Step 2, then press CLEAR.
To return to normal play
In stop mode, press PLAY MODE twice, or
during playback, press CLEAR to return to
normal play.
z You can do Repeat Play of the programmed titles,
chapters, or tracks. Press REPEAT, or set “REPEAT”
to on in the Control Menu display during Programme
Play.
Note
You may not be able to do Shuffle Play depending on
the DVD.
Note
The number of titles, chapters, or tracks displayed are
the same number of titles, chapters, or tracks
recorded on a disc.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select the Repeat Play setting.
Playing repeatedly (Repeat
Play)
(
)
)
1 2 2 7
(
1 8 3 4
DVD
T
1 : 3 2 : 5 5
You can play all the titles/tracks or a single
title/chapter/track on a disc.
OFF
OFF
DISC
TITLE
CHAPTER
In Shuffle or Programme Play mode, the
system repeats the titles or tracks in the
shuffled or programmed order.
You cannot perform Repeat Play during
PBC playback of VIDEO CDs (page 36).
You may not be able to perform Repeat Play
depending on the DVD.
When playing a DVD and when
Programme Play is set to OFF
• OFF: does not play repeatedly.
• DISC: repeats all the titles (except ALL
DISCS SHUFFLE).
• TITLE: repeats the current title on a disc.
• CHAPTER: repeats the current chapter
(except ALL DISCS SHUFFLE).
REPEAT
CLEAR
1
4
7
2
5
3
6
9
PLAY MODE
8
When playing a VIDEO CD/SACD/CD
and when Programme Play is set to
>
10
10/0
OFF
• OFF: does not play repeatedly.
• DISC: repeats all the tracks on a disc.
(except ALL DISCS SHUFFLE)
• TRACK: repeats the current track
H
DVD DISPLAY
X/x
ENTER
When Programme Play is set to ON
• OFF: does not play repeatedly.
• ON: repeats Programme Play.
1
2
Press DVD DISPLAY.
The Control Menu appears.
To cancel Repeat Play
Press CLEAR.
Press X/x to select
z You can set Repeat Play during stop
mode
After selecting the “REPEAT” item, press H.
The system starts Repeat Play.
(REPEAT) then press ENTER.
If you do not select “OFF,” the
indicator of the “REPEAT” lights in
green.
z You can quickly display the “REPEAT”
status
Press REPEAT on the remote.
Note
If you set the DISC repeat or DISC repeat with
Programme Play, the maximum programme
repetition is 5.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a Scene
Watching frame by frame (Slow-
motion play)
Searching for a Particular
Point on a Disc (Scan, Slow-
motion Play)
You can use this function only for DVDs or
VIDEO CDs. Press
or
when the
system is in the pause mode. To return to the
normal speed, press H.
You can locate a particular point on a disc
quickly by monitoring the picture or playing
back slowly.
Each time you press
or
during Slow-
motion play, the playback speed changes.
Two speeds are available. With each press
the indication changes as follows:
Playback direction
SLOW
m/M
/
SLOW 2 y SLOW 1
H
Opposite direction (DVD only)
SLOW 2 y SLOW 1
The SLOW 2 /SLOW 2 playback speed
is slower than SLOW 1 /SLOW 1
.
Note
Depending on the DVD/VIDEO CD, you may not be
able to do some of the operations described.
Locating a point quickly by playing
a disc in fast forward or fast
reverse (Scan)
Press m or M while playing a disc.
When you find the point you want, press
H to return to normal speed.
Each time you press m or M during
scan, the playback speed changes. Three
speeds are available. With each press the
indication changes as follows:
Playback direction
×2
B
(DVD/SACD/CD only) t FF1
M
t FF2M
Opposite direction
×2b (DVD only) t FR1m t FR2m
The ×2B/×2b playback speed is about twice
the normal speed. The FF2M/FR2m
playback speed is faster than FF1M/
FR1m.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
xWhen playing a VIDEO CD with
Searching for a Title/
Chapter/Track/Index/
Scene
PBC Playback
(SCENE)
xWhen playing a SACD/CD
(TRACK) or
(INDEX)
You can search a DVD disc by title or
chapter, and you can search a VIDEO CD or
CD by track, index, or scene. As titles and
tracks are assigned unique numbers on the
disc, you can select the desired one by
entering its number. Or, you can search for a
scene using the time code. (TIME SEARCH)
Example: when you select
(CHAPTER)
“
(
)” is selected ( refers to a
** **
**
number).
The number in parentheses indicates
the total number of titles, chapters,
tracks, indexes, or scenes.
(
)
)
1 2 2 7
CLEAR
(
1 8 3 4
DVD
T
1 : 3 2 : 5 5
1
4
7
2
5
3
6
9
Number
buttons
8
>
10
10/0
Selected row
3
Press ENTER.
X/x
DVD
DISPLAY
“
(
)” changes to “— ( )”.
** **
**
ENTER
(
(
)
)
1 2 2 7
–
–
3 4
DVD
T
1 : 3 2 : 5 5
1
2
Press DVD DISPLAY.
The Control Menu appears.
Press X/x to select the search
method.
4
5
Press X/x or the number buttons
to select the title, chapter, track,
index, or scene number you want
to search.
xWhen playing a DVD
(TITLE),
(CHAPTER), or
(TIME/TEXT)
Select TIME/TEXT for TIME
SEARCH.
If you make a mistake
Cancel the number by pressing
CLEAR, then select another number.
Press ENTER.
The system starts playback from the
selected number.
xWhen playing a VIDEO CD
(TRACK) or
(INDEX)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
To search for a scene using the time
code (TIME SEARCH) (DVD only)
1 In Step 2, select
(TIME/
TEXT).
“T
:
:
” (playing time of the
** ** **
current title) is selected.
2 Press ENTER.
“T
:
:
” changes to “T --:--:--.”
** ** **
3 Input the time code using the number
buttons, then press ENTER.
For example, to find the scene at
2 hours, 10 minutes, and 20 seconds
after the beginning, just enter “2:10:20.”
Note
The title, chapter or track number displayed is the
same number recorded on the disc.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Information About the Disc
When playing a DVD
Viewing the Playing Time
and Remaining Time on
the Front Panel Display
Playing time and number of the current title
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
Remaining time of the
current title
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
You can check information about the disc,
such as the remaining time, total number of
titles of a DVD, or tracks of a SACD, CD, or
VIDEO CD, using the front panel display
(page 12).
Playing time and number
of the current chapter
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
Remaining time of the
current chapter
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
TIME
1
4
7
2
5
3
6
9
Text
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST
S
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
8
>
10
10/0
When playing a VIDEO CD (without
PBC functions), SACD, or CD
Playing time and current track number
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
Press TIME.
Remaining time of the
current track
Each time you press TIME while playing the
disc, the display changes as shown in the
following charts.
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
Playing time of the disc
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
Remaining time of the
disc
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
Text
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST
S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
z When playing VIDEO CDs with PBC functions,
the scene number and the playing time are displayed.
z The playing time and remaining time of the
current chapter, title, track, scene, or disc will also
appear on your TV screen. See the following section
“Checking the Playing Time and Remaining Time”
for instructions on how to read this information.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• While playing SACD, the index indicator does not
appear on the front panel display.
• Depending on the type of disc being played and the
playing mode, the disc information may not be
displayed.
Checking the Playing
Time and Remaining Time
You can check the playing time and
remaining time of the current title, chapter,
or track, and the total playing time or
remaining time of the disc. Also, you can
check the DVD/CD/SACD text recorded on
the disc.
TIME
1
4
7
2
5
3
6
9
8
>
10
10/0
DVD
DISPLAY
1
Press DVD DISPLAY during
playback.
The Control Menu appears.
(
)
)
1 2 2 7
(
1 8 3 4
DVD
T
1 : 3 2 : 5 5
Disc type
Time information
2
Press TIME repeatedly to change
the time information.
The display and the kinds of time that
you can change depend on the disc you
are playing.
continued
45
Download from Www.Somanuals.com. All Manuals Search And Download.
z If the DVD/CD/SACD text does not fit on a
single line, you can see the entire text by scrolling it
across the front display.
xWhen playing a DVD
• T
:
:
** ** **
Playing time of the current title
• T–
:
:
z You can select the time and text by pressing
TIME.
** ** **
Remaining time of the current title
• C
:
:
** ** **
Playing time of the current chapter
• C–
Notes
• Only letters of the alphabet can be displayed.
• This system can only display the first level of
DVD/CD/SACD text, such as the disc name or title.
• In SACD playback, the system can only display a
limited number of characters. Also, depending on
the disc, all text characters are not displayed.
:
:
** ** **
Remaining time of the current
chapter
xWhen playing a VIDEO CD
(with PBC functions)
•
:
** **
Playing time of the current scene
xWhen playing a VIDEO CD
(without PBC functions), SACD,
or CD
• T
:
** **
Playing time of the current track
• T–
:
** **
Remaining time of the current
track
• D
:
** **
Playing time of the current disc
• D–
:
** **
Remaining time of the current disc
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
Checking the DVD/CD/SACD text
Press TIME repeatedly in Step 2 to display
the text recorded on the DVD/CD/SACD.
The DVD/CD/SACD text appears only
when the text is recorded on the disc. You
cannot change the text.
TIME/TEXT
BRAHMS SYMPHONY NO – 4
DVD/CD/SACD text
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustments
3
Press X/x to select the desired
audio signal.
Changing the Sound
xWhen playing a DVD
Depending on the DVD, the choice of
language varies.
When 4 digits are displayed, they
represent the language code. Refer to
the language code list on page 81 to
see which language the code
represents. When the same language is
displayed two or more times, the DVD
is recorded in multiple audio formats.
If a DVD is recorded with multilingual
tracks, you can select the language you want
while playing the DVD.
If the DVD is recorded in multiple audio
formats (PCM, Dolby Digital, MPEG audio,
or DTS), you can select the audio format
you want while playing the DVD.
With stereo CDs or VIDEO CDs, you can
select the sound from the right or left channel
and listen to the sound of the selected channel
through both the right and left speakers. (In
this case, the sound loses its stereo effect.)
For example, when playing a disc containing
a song with the vocals on the right channel
and the instruments on the left channel, you
can select the left channel and hear only the
instruments from both speakers.
xWhen playing a VIDEO CD, or CD
The default setting is underlined.
• STEREO: The standard stereo sound
• 1/L: The sound of the left channel
(monaural)
• 2/R: The sound of the right
channel (monaural)
xWhen playing a SACD
In stop mode, depending on the SACD,
the choice of settings varies.
• MULTI: The disc has multi-
channel playback area
4
7
5
8
6
9
AUDIO
>
10
10/0
• 2CH: The disc has the 2 channel
playback area.
• CD: When you want to play the
disc as a conventional CD.
DVD
DISPLAY
X/x
Note
ENTER
Not all discs give you the three choices above
when in SACD playback. It all depends on the
layer configuration of the SACD to be played.
1
2
Press DVD DISPLAY during
playback.
The Control Menu is displayed.
4
Press ENTER.
Press X/x to select
(AUDIO), then ENTER.
The options for AUDIO appear.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
(
)
)
z You can selectAUDIO directly by pressingAUDIO.
Each time you press the button, the item changes.
1 2 2 7
(
DVD
1 8 3 4
T
1 : 3 2 : 5 5
1: ENGLISH
1: ENGLISH
2: ENGLISH
3: FRENCH
Notes
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
• For discs not in multiple audio format, you cannot
change the sound.
• During DVD playback, the sound may change
L
C
R
LFE
automatically.
LS
RS
continued
47
Download from Www.Somanuals.com. All Manuals Search And Download.
The display examples are as follows:
• PCM (stereo)
Displaying the audio information of
the disc
PROGRAM FORMAT
PCM 48kHz 24bit
When you select “AUDIO,” the channels
being played are displayed on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to
5.1 channel signals can be recorded on a
DVD. Depending on the DVD, the number
of recorded channels may differ.
• Dolby Surround
Current audio format*
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
(
)
)
1 2 2 7
(
DVD
1 8 3 4
T
1 : 3 2 : 5 5
1: ENGLISH
L
C
R
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
C
R
S
LFE
LS
RS
• Dolby Digital 5.1ch
When an LFE signal component is output,
“LFE” is enclosed in a solid line. When an
LFE signal component is not output,
“LFE” is enclosed in a broken line.
Current playing programme format**
*“PCM,” “MPEG,” “DTS,” or “DOLBY
DIGITAL” is displayed.
For “DOLBY DIGITAL,” the channels in
the playing track are displayed numerically
as follows:
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
C
R
For Dolby Digital 5.1 ch:
LFE
Rear component 2
LS
RS
• DTS
DOLBY DIGITAL 3 / 2.1
“LFE” is always enclosed in a solid line
regardless of the LFE signal component
being output.
Front component 2 +
Centre component 1
LFE (Low Frequency
Effect) component 1
PROGRAM FORMAT
DTS 3/2.1
**The letters in the programme format
display mean the following sound
component:
L
C
R
L: Front (left)
R : Front (right)
C : Centre
LFE
LS
RS
LS : Rear (left)
RS : Rear (right)
Notes
• When the signal contains rear signal components
such as LS, RS, or S, the Surround effect is
enhanced (page 49).
• If you play MPEGAUDIO sound tracks, the
system outputs PCM (stereo) signals.
S : Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal.
LFE : LFE (Low Frequency Effect)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
z You can identify the encoding format of
programme software by looking at its
packaging
Selecting a Sound Field
– Dolby Digital discs are labelled with the
logo.
– Dolby Surround encoded programmes are labelled
with the
logo.
– DTS Digital Surround discs are marked with DTS.
You can enjoy surround sound simply by
selecting one of the pre-programmed sound
fields according to the programme you want
to listen to. Surround sound can be applied
to DVD, VIDEO CD, and CD playback.
Note
When you play sound tracks with 96 kHz sampling
frequency, the output signals will be converted to
48 kHz (sampling frequency).
CINEMA STUDIO EX A*
Reproduces the sound characteristics of the
Sony Pictures Entertainment’s classic
editing studio using the 3D sound imaging
of V. MULTI DIMENSION (page 50) to
create 5 sets of virtual speakers surrounding
the listener from a single pair of actual rear
speakers.
1
4
7
2
5
3
6
9
SOUND
FIELD
8
>
10
10/0
DISPLAY
This is a standard mode, great for watching
most movies.
Press SOUND FIELD repeatedly until
the sound field you want appears on
the front panel display.
You can also use SOUND FIELD on the
system to select the pre-programmed sound
fields.
CINEMA STUDIO EX B*
Reproduces the sound characteristics of the
Sony Pictures Entertainment’s mixing studio
using the 3D sound imaging of V. MULTI
DIMENSION (page 50) to create 5 sets of
virtual speakers surrounding the listener
from a single pair of actual rear speakers.
This mode is ideal for watching science-
fiction or action movies with lots of sound
effects.
To check the current sound field
Press DISPLAY repeatedly.
Each time you press DISPLAY, the front
panel display switches as follows:
remaining or playing time t sound field
t remaining or playing time
CINEMA STUDIO EX C*
Reproduces the sound characteristics of the
Sony Pictures Entertainment’s BGM
recording studio using the 3D sound
imaging of V. MULTI DIMENSION (page
50) to create 5 sets of virtual speakers
surrounding the listener from a single pair of
actual rear speakers.
This mode is ideal for watching musicals or
classic films where music is featured in the
soundtrack.
z The system memorises the last sound
field selected for each function mode (Sound
Field Link)
Whenever you select a function such as DVD or
TUNER, the sound field that was last applied to the
function is automatically applied again. For example,
if you listen to DVD with HALL as the sound field,
then change to another function, and then return to
DVD, HALL will be applied again. With the tuner,
sound fields are memorised separately for all preset
stations.
*“VIRTUAL” sound field: Sound field with
virtual speakers.
continued
49
Download from Www.Somanuals.com. All Manuals Search And Download.
V. MULTI DIMENSION*
LARGE HALL
Reproduces the acoustics of a large
rectangular concert hall.
Ideal for soft acoustic sounds.
(Virtual Multi Dimension)
Uses 3D sound imaging to create an array of
virtual rear speakers positioned higher than
the listener from a single pair of actual rear
speakers. This mode creates 5 sets of virtual
speakers surrounding the listener at
JAZZ CLUB
Reproduces the acoustics of a jazz club.
approximately a 30° angle of elevation.
LIVE HOUSE
Reproduces the acoustics of a 300-seat live
house.
SIDE
L
C
R
Great for rock or pop music.
LS
RS
GAME
Obtains maximum audio impact from video
game software.
LS
RS
LS
RS
Be sure to set the game machine to stereo
mode when using game software with stereo
sound capabilities.
BEHIND
L
C
R
AUTO FORMAT DECODE
Automatically detects the type of audio
signal being input (Dolby Digital, DTS,
Dolby Pro Logic, or standard 2 channel
stereo) and performs the proper decoding if
necessary. This mode presents the sound as
it was recorded/encoded, without adding any
effects.
LS
RS
LS
RS
LS
RS
V. SEMI-M. DIMENSION*
(Virtual Semi Multi Dimension)
Uses 3D sound imaging to create virtual rear
speakers from the sound of the front
speakers without using actual rear speakers.
This mode creates 5 sets of virtual speakers
surrounding the listener at a 30° angle of
elevation.
You can use this mode as a reference.
NORMAL SURROUND
Software with multichannel surround audio
signals is played according to the way it was
recorded.
Software with 2 channel audio signals, is
decoded with Dolby Pro Logic to create
surround effects.
L
C
R
LS
RS
2 CH STEREO
Outputs the sound from the front left and
right speakers and subwoofer. Standard two
channel (stereo) sources completely bypass
the sound field processing. Multi channel
surround formats are downmixed to two
channels.
This allows you to play any source using
only the front left and right speakers and
subwoofer.
LS
RS
LS
RS
SMALL HALL
Reproduces the acoustics of a small
rectangular concert hall.
Ideal for soft acoustic sounds.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
HEADPHONE THEATER*
When you connect your headphone to the
PHONES jack of the system, the
HEADPHONE THEATER mode allows you
to experience a theater like environment
while listening through a pair of
Adjusting the level
parameters
headphones. This mode is very effective
with 5.1 ch discreet signal sources like
Dolby Digital and DTS. Selecting any
Sound Field selections (except AUTO
FORMAT DECODE or 2 CH STEREO)
enables the mode.
The level menu contains parameters that let
you adjust the balance and speaker volumes
of each speaker (page 28).
1
2
Start playing a programme source
encoded with multichannel
surround sound.
* “VIRTUAL” sound field: Sound field with
virtual speakers.
Press AMP MENU repeatedly on
the remote.
Notes
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening to sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the rear speakers.
• If you select AUTO FORMAT DECODE or 2 CH
STEREO when the headphones are connected,
2 channel stereo is output. If any other sound field
is selected, it is automatically changed to the
HEADPHONE THEATER mode.
9 LEVEL appears on the front panel
display.
3
4
Sit in your listening position and
select the item to be adjusted
using X/x.
Adjust the volume level using C/c.
The adjusted value will appear on the
front panel display. If you do not operate
the remote for a few seconds, the value
turned off and is stored in the system.
Adjustable parameters for each sound field
FRONT BAL. REAR BAL. REAR LEVEL CENTER LEVEL WOOFER LEVEL
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
V. MULTI DIMENSION
V. SEMI-M. DIMENSION
SMALL HALL
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
LARGE HALL
JAZZ CLUB
LIVE HOUSE
GAME
AUTO FORMAT DECODE
NORMAL SURROUND
2 CH STEREO
HEADPHONE THEATER
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Movies
3
4
Press c or ENTER.
Changing the Angles
The angle number changes to “-.”
If various angles (multi-angles) for a scene
are recorded on the DVD, “ANGLE”
appears in the front panel display. This
means that you can change the viewing
angle.
For example, while playing a scene of a
train in motion, you can display the view
from either the front of the train, the left
window of the train, or from the right
window without having the train’s
movement interrupted.
(
)
)
1 2 2 7
(
1 8 3 4
DVD
T
1 : 3 2 : 5 5
(
)
–
9
Select the angle number using the
number buttons or X/x, then
press ENTER.
The angle is changed to the selected
angle.
Number
Buttons
1
4
7
2
5
3
6
9
8
ANGLE
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
>
10
10/0
z You can select the angle directly by pressing
ANGLE. Each time you press the button, the angle
changes.
DVD
DISPLAY
X/c/x
ENTER
Note
Depending on the DVD, you may not be able to
change the angles, even if multi-angles are recorded
on the DVD.
1
2
Press DVD DISPLAY during
playback.
The Control Menu appears.
Press X/x to select
(ANGLE).
The angle number appears.
The number in parentheses indicates
the total number of angles.
(
)
)
1 2 2 7
(
1 8 3 4
DVD
T
1 : 3 2 : 5 5
(
)
1
9
52
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press X/x to select the language.
Depending on the DVD, the choice of
language varies.
When 4 digits are displayed, they
indicate the language code. Refer to
the language code list on page 81 to
see which language the code
represents.
Displaying the Subtitles
If subtitles are recorded on the discs, you
can turn the subtitles on and off while
playing. If multilingual subtitles are
recorded on the disc, you can change the
subtitle language while playing, or turn the
subtitles on or off whenever you want. For
example, you can select the language you
want to practice and turn the subtitles on for
better understanding.
Press ENTER.
To cancel the SUBTITLE setting
4
7
5
8
6
9
Select “OFF” in Step 3.
>
10
10/0
SUBTITLE
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
z You can select SUBTITLE directly by pressing
SUBTITLE. Each time you press the button, the item
changes.
DVD
DISPLAY
X/x
ENTER
Note
Depending on the DVD, you may not be able to
change the subtitles even if multilingual subtitles are
recorded on it.
1
2
Press DVD DISPLAY during
playback.
The Control Menu appears.
Press X/x to select
(SUBTITLE), then press ENTER.
The options for SUBTITLE appear.
(
)
)
1 2 2 7
(
1 8 3 4
DVD
T
1 : 3 2 : 5 5
OFF
OFF
1: ENGLISH
2: FRENCH
3: SPANISH
53
Download from Www.Somanuals.com. All Manuals Search And Download.
To close the ADVANCED window
Checking the Play
Select “OFF” in Step 3.
Information (ADVANCED)
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
You can check information such as the bit
rate or the disc layer that is being played.
While playing a disc, an approximate bit
rate of the playback picture is always
displayed as Mbps (Mega bit per second)
and the audio as kbps (kilo bit per second).
Displays of each item
By pressing DVD DISPLAY repeatedly, you
can display either “BIT RATE” or
“LAYER,” whichever was selected in
“ADVANCED.”
BIT RATE
DVD
DISPLAY
X/x
BIT RATE
Audio
Video
384kbps
ENTER
Mbps
10
0
5
When playing MPEG audio sound tracks
BIT RATE
1
2
Press DVD DISPLAY during
playback.
The Control Menu is displayed.
kbps
Audio
Video
1000
0
0
Mbps
10
5
Bit rate refers to the amount of video/audio
data per second in a disc. The higher the bit
rate, the larger the amount of data. When the
bit rate level is high, there is a large amount
of data. However, this does not always mean
that you can get higher quality pictures or
sounds.
Press X/x to select
(ADVANCED), then press ENTER.
The options forADVANCED appear.
(
)
)
1 2 2 7
(
1 8 3 4
DVD
T
1 : 3 2 : 5 5
Appears when the DVD
has dual layers
LAYER
BIT RATE
OFF
BIT RATE
LAYER
BIT RATE
384kbps
Mbps
0
5
10
3
4
Press X/x to select items.
For each item, please refer to
“Displays of each item.”
• BIT RATE: displays the bit rate.
• LAYER: displays the layer and the
pick-up point.
Indicates the approximate point where the
disc is playing.
If it is a dual-layer DVD, the system
indicates which layer is being read (“Layer
0” or “Layer 1”).
Press ENTER.
For details on the layers, see page 77
(DVD).
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Various Additional Functions
3 Press X/x to select
(CUSTOM
PARENTAL CONTROL), then press
Locking Discs (CUSTOM
PARENTAL CONTROL, PARENTAL
CONTROL)
ENTER.
“CUSTOM PARENTAL CONTROL” is
selected.
(
)
)
1 2 2 7
You can set two kinds of playback
restrictions for a disc.
(
1 8 3 4
DVD
T
1 : 3 2 : 5 5
• Custom Parental Control
You can set the playback restrictions so
that the system will not play inappropriate
discs.
OFF
ON
PASSWORD
• Parental Control
Playback of some DVDs can be limited
according to a predetermined level such as
the age of the users.
4 Press X/x to select “ ON t,” then
press ENTER.
The same password is used for both Parental
Control and Custom Parental Control.
xWhen you have not entered a
password
The display for registering a new
password appears.
Custom Parental Control
You can set the same Custom Parental
Control password for up to 50 discs. When
you set the fifty-first-disc, the playback
restriction for the first disc is cancelled.
CUSTOM PARENTAL CONTROL
Enter a new 4-digit password, then
ENTER
press
.
Number
buttons
1
4
7
2
5
3
6
9
8
Enter a 4-digit password by using the
number buttons, then press ENTER.
The display for confirming the password
appears.
>
10
10/0
x
xWhen you have already
DVD
DISPLAY
C/X/x
O RETURN
ENTER
registered a password
The display for entering the password
appears.
1 Insert the disc you want to lock.
If the disc is playing, press x to stop
playback.
CUSTOM PARENTAL CONTROL
ENTER
Enter password, then press
.
2 In stop mode, press DVD DISPLAY.
The Control Menu appears.
continued
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the disc for which Custom
Parental Control is set
5 Enter or re-enter your 4-digit password
by using the number buttons, then
press ENTER.
“Custom parental control is set.” appears
and then the screen returns to the
Control Menu display.
1 Insert the disc for which Custom
Parental Control is set.
The CUSTOM PARENTAL CONTROL
display appears.
If you make a mistake entering
your password
Press C before you press ENTER and
input the correct number.
CUSTOM PARENTAL CONTROL
Custom parental control is already
set. To play, enter your password
ENTER
and press
.
If you make a mistake
Press O RETURN, then start from Step 3
again.
2 Enter your 4-digit password using the
number buttons, then press ENTER.
The system is ready for playback.
To turn off the Control Menu
Press O RETURN, then press DVD
DISPLAY repeatedly until the Control
Menu is turned off.
z If you forget your password, enter the 6-digit
number “199703” using the number buttons when the
CUSTOM PARENTAL CONTROL display asks you
for your password, then press ENTER. The display
will ask you to enter a new 4-digit password.
To turn off the Custom Parental
Control function
1 In Step 4, select “OFF t,” then press
ENTER.
Limiting playback for children
(Parental Control)
2 Enter your 4-digit password using the
number buttons, then press ENTER.
Playback of some DVDs can be limited
according to a predetermined level such as
the age of the users. The “Parental Control”
function allows you to set a playback
limitation level.
To change the password
1 In Step 4, press X/x to select
“PASSWORD t,” then press ENTER.
The display for entering the password
appears.
A scene that is limited is not played, or it is
replaced by a different scene.
2 Enter your 4-digit password using the
Number
buttons
1
4
7
2
5
3
6
9
number buttons, then press ENTER.
8
>
10
10/0
3 Enter a new 4-digit password using the
number buttons, then press ENTER.
4 To confirm your password, re-enter it
using the number buttons, then press
ENTER.
H
X/x
O RETURN
ENTER
DVD
SETUP
56
Download from Www.Somanuals.com. All Manuals Search And Download.
1 In stop mode, press DVD SETUP.
4 Enter or re-enter your password using
the number buttons, then press ENTER.
The display for setting the playback
limitation level and changing the
password appears.
The Setup Display appears.
2 Press X/x to select “ CUSTOM SETUP,”
then press ENTER.
“CUSTOM SETUP” is displayed.
CUSTOM SETUP
CUSTOM SETUP
COLOR SYSTEM
PAUSE MODE:
PARENTAL CONTROL
TRACK SELECTION
PARENTAL CONTROL
LEVEL:
STANDARD:
CHANGE PASSWORD
AUTO
AUTO
OFF
USA
OFF
5 Press X/x to select “ STANDARD,” then
press ENTER.
3 Press X/x to select “ PARENTAL
CONTROL t,” then press ENTER.
The selection items for “STANDARD”
are displayed.
xIf you have not entered a
password
The display for registering a new
password appears.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL:
OFF
USA
USA
STANDARD:
CHANGE PASSWORD
CUSTOM SETUP
OTHERS
PARENTAL CONTROL
Enter a new 4-digit password, then
ENTER
press
.
6 Press X/x to select a geographic area
as the playback limitation level, then
press ENTER.
Enter a 4-digit password using the
The area is selected.
number buttons, then press ENTER.
The display for confirming the password
appears.
If you select “OTHERS t,” select and
enter the standard code in the table on
page 59 using the number buttons.
xWhen you have already
registered a password
The display for entering the password
appears.
CUSTOM SETUP
PARENTAL CONTROL
ENTER
Enter password, then press
.
continued
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the disc for which Parental
Control is set
7 Press ENTER.
The selection items for “LEVEL” are
displayed.
CUSTOM SETUP
1 Insert the disc and press H.
The PARENTAL CONTROL display
appears.
PARENTAL CONTROL
LEVEL:
STANDARD:
CHANGE PASSWORD
OFF
OFF
8:
7: NC17
2 Enter your 4-digit password using the
number buttons, then press ENTER.
The system starts playback.
6:
5:
R
z If you forget your password, remove the disc and
repeat Step 1 to 5 of “Limiting playback for
children.” When you are asked to enter your
password, enter “199703” using the number buttons,
then press ENTER. The display will ask you to enter
a new 4-digit password. After you enter a new 4-digit
password in Step 3, replace the disc in the system and
press H. When the PARENTAL CONTROL display
appears, enter your new password.
8 Select the level you want using X/x,
then press ENTER.
Parental Control setting is complete.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL:
STANDARD:
CHANGE PASSWORD
4: PG13
USA
Notes
• When you play DVDs which do not have the
Parental Control function, playback cannot be
limited on this system.
• Depending on the DVD, you may be asked to
change the parental control level while playing the
disc. In this case, enter your password, then change
the level. If the Resume Play mode is cancelled, the
level returns to the original level.
The lower the value, the more strict the
limitation.
If you make a mistake
Press O RETURN to go back to the
previous screen.
To turn off the Setup Display
Press DVD SETUP repeatedly until the
Setup Display is turned off.
To turn off the Parental Control
function and play the DVD after
entering your password
Set “LEVEL” to “OFF” in Step 8.
To change the password
1 In Step 5, select “CHANGE
PASSWORD t” using x, then press
ENTER.
The display for entering the password
appears.
2 Follow Step 3 to enter a new password.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Area Code
Standard
Code
Standard
Code
number
number
Argentina
Australia
Austria
Belgium
Brazil
2044
2047
2046
2057
2070
2079
2090
2092
2115
2165
2174
2109
2219
2248
2238
2254
2276
Korea
2304
2363
2362
2376
2390
2379
2427
2424
2436
2489
2501
2149
2499
2086
2543
2528
Malaysia
Mexico
Netherlands
New Zealand
Norway
Canada
Chile
Pakistan
Philippines
Portugal
Russia
China
Denmark
Finland
France
Singapore
Spain
Germany
Hong Kong
India
Sweden
Switzerland
Taiwan
Indonesia
Italy
Thailand
Japan
United Kingdom 2184
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
TV
Controlling the TV with
the Supplied Remote
Manufacturer
Code number
DAEWOO
002, 004, 005, 006, 007,
015
FISHER
008
By adjusting the remote signal, you can
control your TV with the supplied remote.
GOLDSTAR
002, 003, 011, 012, 015,
034
DRUNDIG
HITACHI
017, 034
Notes
002, 013, 014, 015
021, 022
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number may be reset to the default (SONY)
setting. Reset the appropriate code number.
ITT/NOKIA
JVC
016
MAGNAVOX
MITSUBISHI/MGA
NEC
002, 003, 018
002, 003, 019
002, 003, 020
009, 024
Controlling TVs with the remote
PANASONIC
PHILIPS
015, 018
TV ?/1
PIONEER
009, 025, 026, 040
002, 010, 027, 028, 029
RCA/PROSCAN
SAMSUNG
TV/VIDEO
002, 003, 015, 031, 032,
033, 034
1
4
7
2
5
3
6
9
Number*
buttons
SANYO
008, 044, 045, 046
035
8
SHARP
>
10
10/0
ENTER
SONY
001
CONTROL
DVD/TV
switch
TELEFUNKEN
THOMSON
TOSHIBA
ZENITH
023, 036, 037, 038
030, 037, 039
035, 040, 041
042, 043
CATV
Manufacturer
SONY
Code number
Press and hold TV [/1 while entering your
TV’s manufacturer’s code (see the table)
using the number buttons and press ENTER.
Then release TV [/1.
101
JERROLD/GI
102, 103, 104, 105, 106,
107, 108, 109, 119, 131
SCIENTIFIC ATLANTA
PIONEER
110, 111, 112
115, 116
HAMLIN/REGAL
OAK
123, 124, 125, 126, 127
128, 129, 130
113, 114
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find
the one that works with your TV.
ZENITH
TOCOM
117, 118, 131
120, 121, 122
PANASONIC
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the TV
You can control your TV using the buttons
below.
Watching the Video or
other Unit
By pressing
TV [/1
You can
Turn the TV on or off.
You can use VCRs or other units connected
to the VIDEO 1 or VIDEO 2 jacks. Refer to
the operation manual supplied with the unit
for farther information on the operation.
TV/VIDEO
Switch the TV’s input source
between the TV and other input
sources.
Switching between TV and DVD
Using the CONTROL DVD/TV switch, you
can switch the remote signal between
control of the TV and control of the DVD
unit. When you watch the DVD, ensure that
you have the CONTROL DVD/TV switch
set to DVD.
1
4
7
2
5
3
6
9
FUNCTION
8
>
10
10/0
The table below shows the buttons that are
affected by the CONTROL DVD/TV switch.
Button
DVD
TV
1~9,**
>10,
10/0
Standard number Regardless of
Press FUNCTION repeatedly until
button function
for DVD.
the number
button pressed,
the channel
VIDEO 1 or VIDEO 2 that you connected
the unit to appears on the front panel
display.
advances in
Each time you press FUNCTION, the mode
of the system changes in the following
sequence.
DVD t VIDEO 1 t VIDEO 2 t
TUNER t DVD...
numerical order.
ENTER
Standard enter
function for
DVD.
Skips to channel
12.
.
Standard
CH –
preceding title,
chapter skip
function for
DVD.
>
Standard forward CH +
title, chapter
skip for DVD.
3
#
VOL +
VOL –
VOL +
VOL –
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
* Use the number buttons only to enter the code
number of controllable TVs.
**For double digit number, press >10, then the
number. (For example, press >10, then 2 and 5 for
entering 25.)
61
Download from Www.Somanuals.com. All Manuals Search And Download.
To listen to non-preset radio stations
Use manual or automatic tuning in Step 2.
For manual tuning, press m or M
Listening to the Radio
(TUNING + or –) on the remote repeatedly.
For automatic tuning, press and hold m or
M (TUNING + or –) on the remote.
Preset radio stations in the system’s memory
first (see “Presetting Radio Stations” on
page 30).
z If an FM programme is noisy
Press STEREO/MONO on the remote so that
“MONO” appears on the front panel display. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.
1
STEREO/
MONO
1
4
7
2
5
3
6
9
FUNCTION
8
>
10
10/0
DISPLAY
VOL +/–
z To improve reception
Reorient the supplied antennas.
To check the frequency or sound field
Press DISPLAY repeatedly.
Each time you press DISPLAY, the front
panel display changes as follows:
TUNING
+/–
PRESET
+/–
index name of the station t frequency t
sound field t index name of the station
1
Press FUNCTION repeatedly until
TUNER appears on the front panel
display.
The last received station is tuned in.
ALL1DISC S AUTO
PRO LOGIC
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST
S
dB REPEAT
1
DIGITAL FM AM
kHz PROGRAM
MHz SHUFFLE
NTSC PBC ANGLE
m
ALL1DISC S AUTO
PRO LOGIC
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M
MONO ST
S
dB REPEAT
1
DIGITAL FM AM
kHz PROGRAM
MHz SHUFFLE
NTSC PBC ANGLE
2
3
Press PRESET + or PRESET –
repeatedly to select the preset
station you want.
Each time you press the button, the
system tunes in one preset station.
Adjust the volume by pressing
VOL +/–.
To turn off the radio
Press 1.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data
System (RDS)
Naming Preset Stations
You can enter a name of up to 8 characters
for preset stations. These names (for
example, “XYZ”) appear in the system’s
front panel display when a station is
selected.
(only for the European models)
What is the Radio Data System?
Note that no more than one name can be
entered for each preset station.
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the
regular programme signal. This tuner offers
convenient RDS features such as station
name display. RDS is available only for FM
stations.*
NAME
1
4
7
2
5
3
6
9
FUNCTION
8
>
10
10/0
Note
RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly,
or if the signal strength is weak.
C/X/x/c
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
ENTER
Receiving RDS broadcasts
1
2
Press FUNCTION repeatedly until
TUNER appears on the front panel
display.
The last station you received is tuned
in.
Each time you press FUNCTION, the
mode of the system changes in the
following sequence:
DVD t VIDEO 1 t VIDEO 2 t
TUNER t DVD...
Simply select a station from the FM band.
When you tune in a station that provides
RDS services, the station name appears in
the display.
To check the RDS information
Each time you press DISPLAY, the display
changes as follows:
Station name*
t
Tune in the preset station you
want to create an index name for.
If you are not familiar with how to
tune in preset stations, see “Listening
to the Radio” on page 62.
r
Frequency
r
SOUND FIELD
* If the RDS broadcast is not received, the station
name may not appear in the display.
continued
63
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press NAME.
Create an index name by using the
cursor buttons:
Press x/X to select a character, then
press c to move the cursor to the next
position.
If you make a mistake
Press C or c repeatedly until the
character to be changed flashes, then
press x/X to select the right character.
5
Press ENTER.
To assign index names to other
stations
Repeat Steps 2 to 5.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings and Adjustments
3 Press X/x to select “ CUSTOM,” then
press ENTER.
Using the Setup Display
The Setup Display appears.
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
By using the Setup Display, you can make
various adjustments to items such as picture
and sound. You can also set a language for
the subtitles and the Setup Display, among
other things. For details on each Setup
Display item, see pages 66-72. For an
overall list of Setup Display items, see page
82.
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
Main
item
4 Press X/x to select the setup item from
the displayed list: “ LANGUAGE SETUP,”
“ SCREEN SETUP,” “ CUSTOM SETUP,”
and “ SPEAKER SETUP.” Then press
ENTER.
How to use the Setup Display
>
10
10/0
The selected Setup item appears.
Example: “SCREEN SETUP”
Selected item
X/x
DVD
DISPLAY
DVD
SETUP
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
ENTER
16:9
ON
JACKET PICTURE
Setup
items
1 In stop mode, press DVD DISPLAY.
The Control Menu appears.
If you press DVD SETUP, you can go to
Step 3 directly.
2 Press X/x to select
(SETUP),
then press ENTER.
The options for SETUP appear.
(
)
47
DVD
:
:
CUSTOM
RESET
continued
65
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Select an item using X/x, then press
ENTER.
Setting the Display or
Sound Track Language
(LANGUAGE SETUP)
The options for the selected item appear.
Example: “TV TYPE”
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
“LANGUAGE SETUP” allows you to set
various languages for the on-screen display
or sound track.
Select “LANGUAGE SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 65).
Options
6 Select a setting using X/x, then press
ENTER.
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
The setting is selected and setup is
complete.
Example: “4:3 PAN SCAN”
Selected setting
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
xOSD (On-Screen Display)
Switches the display language on the screen.
Selects the language from the displayed list.
4:3 PAN SCAN
ON
JACKET PICTURE
xDVD MENU (DVD only)
Selects the desired language for the DVD
menu.
xAUDIO (DVD only)
Switches the language of the sound track.
Selects the language from the displayed list.
When you select “ORIGINAL,” the
language given priority in the disc is
selected.
To turn off the Setup Display
Press DVD SETUP or DVD DISPLAY
repeatedly until the Setup Display is turned
off.
xSUBTITLE (DVD only)
z If you select “RESET” in Step 2, you can reset all
of the “SETUP” settings on page 82 (except for
PARENTAL CONTROL) to the default settings.
After you select “RESET” and press ENTER, select
“YES” to reset the settings (it takes a few seconds to
complete), or select “NO” and press ENTER to
return to the Control Menu. Do not press POWER or
1 when resetting the system.
Switches the language of the subtitle.
Selects the language from the displayed list.
When you select “AUDIO FOLLOW,” the
language for the subtitles changes according
to the language you selected for the sound
track.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
zIf you select “OTHERS t” in “DVD MENU,”
“SUBTITLE,” or “AUDIO,” select and enter the
language code from the list using the number buttons
(page 81).
After you have made a selection, the language code
(4 digits) is displayed the next time you select
“OTHERS t.”
Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Note
If you select a language that is not recorded on the
DVD, one of the recorded languages will be
automatically selected (except for the “OSD”).
Select “SCREEN SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 65).
The default settings are underlined.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
xTV TYPE (DVD only)
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
The default settings vary, depending on the
country model.
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3
LETTER
BOX
Select this when you connect a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the screen.
4:3
PAN SCAN
Select this when you connect a
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
continued
67
Download from Www.Somanuals.com. All Manuals Search And Download.
16:9
Custom Settings (CUSTOM
SETUP)
4:3 LETTER BOX
4:3 PAN SCAN
Allows setting up Parental Control and other
settings.
Select “CUSTOM SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 65).
The default settings are underlined.
CUSTOM SETUP
COLOR SYSTEM
PAUSE MODE:
PARENTAL CONTROL
TRACK SELECTION
Note
AUTO
AUTO
Depending on the DVD, “4:3 LETTER BOX” may
be selected automatically instead of “4:3 PAN
SCAN” or vice versa.
OFF
xSCREEN SAVER
Turns the screen saver on and off so that the
screen saver image appears when you leave
the system in pause or stop mode for
15 minutes, or when you play back a CD for
more than 15 minutes. The screen saver will
help prevent your display device from
becoming damaged (ghosting). Press H to
turn off the screen saver.
xCOLOR SYSTEM for VIDEO CD
playback (Asian models and
Australian models only)
Select the colour system when you play a
VIDEO CD.
AUTO
Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a DUAL
system, select AUTO.
ON
Turns on the screen saver.
Turns off the screen saver.
OFF
xBACKGROUND
PAL
Changes the video signal of an
NTSC disc and output in the
PAL system.
Selects the background colour or picture on
the TV screen in stop mode or while playing
a CD.
NTSC
Changes the video signal of a
PAL disc and outputs it in the
NTSC system.
JACKET
PICTURE
The jacket picture (still picture)
appears in the background, but
only when the jacket picture is
already recorded on the disc
(CD-EXTRA, etc.). If the disc
does not contain a jacket
Notes
• You cannot change the colour system of the disc
itself.
• On Asian models or Australian models, you can
change the colour system of this unit according to
the connected TV. See page 24.
picture, the “GRAPHICS”
picture appears.
GRAPHICS A preset picture stored in the
system appears in the
background.
BLUE
The background colour is blue.
The background colour is black.
BLACK
68
Download from Www.Somanuals.com. All Manuals Search And Download.
xPAUSE MODE (DVD only)
Settings for the Speakers
Selects the picture in pause mode.
(SPEAKER SETUP)
AUTO
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select
this position.
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume and the balance of the
speakers to the same level.
FRAME
The picture, including subjects
that do not move dynamically, is
output in high resolution.
x
PARENTAL CONTROL t (DVD only)
Sets a password and playback limitation
level for DVDs with playback limitation for
children. For details, see “Limiting playback
for children (Parental Control)” (page 56).
Select “SPEAKER SETUP” in the setup
display. For details, see “Using the Setup
Display” (page 65).
The default settings are underlined.
xTRACK SELECTION (DVD only)
Gives the sound track having the highest
number of channels priority when you play
a DVD on which multiple audio formats
(PCM, MPEG audio, DTS, or Dolby Digital
format) are recorded.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
TEST TONE:
FRONT:
CENTER:
REAR:
SUBWOOFER:
OFF
YES
YES
BEHIND(LOW)
YES
OFF
No priority given.
Priority given.
AUTO
To return to the default setting
Select the item, then press CLEAR.
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 66).
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels, the
system selects PCM, DTS, Dolby Digital, and
MPEG audio sound tracks in this order.
• Depending on the DVD, the audio channel with
priority may be predetermined. In this case, you
cannot give priority to the DTS, Dolby Digital, or
MPEG audio format by selecting “AUTO.”
xSIZE
When you do not connect centre or rear
speakers, or move the rear speakers, set the
parameters for CENTER and REAR. Since
the front speaker and subwoofer settings are
fixed, you cannot change them. The default
settings are underlined.
• FRONT
— YES
• CENTER
— YES: Normally select this.
— NONE: Select this if no centre speaker
is used.
continued
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Position diagram
• REAR
— BEHIND (LOW), BEHIND (HIGH),
SIDE (LOW), SIDE (HIGH): Specify
the position and height to implement
the Digital Cinema Surround modes in
the “Virtual Multi Dimension” sound
field (page 50) properly.
— NONE: Select this if no rear speaker is
used.
• SUBWOOFER
90
A
A
45
B
B
— YES
20
Notes
• When you select an item, the sound cuts off for a
moment.
Height diagram
• Depending on the settings of other speakers, the
subwoofer may output excessive sound.
Specifying the rear speaker position
and height
C
D
C
If you select anything other than “NONE” in
“REAR,” specify the position and height of
the rear speakers. The default setting is
underlined.
60
30
D
Select this if the rear
speakers are located in
section B and D.
BEHIND (LOW)
xDISTANCE
BEHIND (HIGH) Select this if the rear
speakers are located in
The default distance setting for the speakers
in relation to the listening position is shown
below.
section B and C.
SIDE (LOW)
SIDE (HIGH)
Select this if the rear
speakers are located in
section A and D.
Select this if the rear
speakers are located in
section A and C.
5m
(17ft)
5m
(17ft)
5m
(17ft)
These parameters are not available when “REAR” is
set to “NONE.”
3.4m
(12ft)
3.4m
(12ft)
Be sure to change the value in the Setup
Display when you move the speakers. The
default adjustments are in parentheses.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT
Front speaker distance from the
listening position can be set in
0.2 meter (1 ft) increments from
1 to 15 meters (3 to 50 feet).
xLEVEL
(5m/17ft)
You can vary the level of each speaker as
follows. Be sure to set “TEST TONE” to
“ON” for easy adjustment.
Centre speaker distance can be
moved up to 1.6 meters (5 ft)
forward closer to the listening
position, in 0.2 meter (1 ft)
increments.
CENTER
(5m/17ft)
The default adjustments are in parentheses.
CENTER
(0dB)
Adjusts the level of the centre
speaker (–6dB to +6dB, 1dB
increments).
Rear speaker distance can be moved
up to 4.6 meters (15 ft) closer to
your listening position from the
front speaker position, in 0.2 meter
(1 ft) increments.
REAR
(3.4m/12ft)
REAR (0dB) Adjusts the level of the rear
speakers (–6dB to +6dB, 1dB
increments).
SUBWOOFER Adjusts the level of the
(0dB)
subwoofer (–6dB to +6dB,
1dB increments).
Notes
• In SPEAKER SETUP, the North American model's
OSD displays both metric and imperial
To adjust the volume of all the
speakers at one time
Use the VOLUME control.
measurements.The other model's displays metric
measurements only. The manual also shows both.
• When you set the distance, the sound cuts off for a
moment.
• If each of the front or rear speakers are not placed
at an equal distance from your listening position,
set the distance according to the closest speaker.
• Do not place the rear speakers farther away from
your listening position than the front speakers.
xTEST TONE
The speakers will emit a test tone to adjust
“BALANCE” and “LEVEL.”
The test tone is not emitted from the
speakers.
OFF
ON
xBALANCE
The test tone is emitted from each
speaker in sequence while adjusting
balance or level.
You can vary the balance of the left and right
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
The default adjustments are in parentheses.
When you select one of the
“SPEAKER SETUP” items, the test
tone is emitted from both left and
right speakers simultaneously.
Adjust the balance between the
front left and right speakers (You
can adjust from centre 6 step left or
right).
FRONT
(CENTRE)
Adjust the balance between the rear
left and right speakers (You can
adjust from centre 6 step left or
right).
REAR
(CENTRE)
continued
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the speaker volume and
level
1 After you stop playback, select
“ SPEAKER SETUP” after pressing DVD
SETUP in the Setup Display.
2 Select “ TEST TONE” and set “ TEST
TONE” to “ ON.”
You will hear the test tone from each
speaker in sequence.
3 From your listening position, select
“ BALANCE” or “ LEVEL” and adjust the
value of “ BALANCE” and “ LEVEL” using
X/x.
The test tone is emitted from both left
and right speakers simultaneously.
4 Select “ TEST TONE” and set “ TEST
TONE” to “ OFF” to turn off the test
tone.
Note
When you adjust the speaker settings, the sound cuts
off for a moment.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
The picture is black and white.
, Depending on the TV, the picture on the
screen becomes black and white when you
play a disc recorded in the NTSC colour
system.
Troubleshooting
If you experience any of the following
difficulties while using the system, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Sound
There is no sound.
, The connecting cord is not connected
securely.
Power
, The connecting cord is damaged.
, Press MUTING on the remote if “MUTING
ON” is displayed on the front panel display.
, The protective device on the system has been
activated because of a short circuit. Turn off
the system, eliminate the short-circuit
problem and turn on the power again.
, The audio connecting cord is damaged.
Replace it with a new one.
The power is not turned on.
, Check that the AC power cord (mains lead) is
connected securely.
Picture
There is no picture.
, The connecting cords are not connected
securely.
, The system is in pause mode or in Slow-
motion Play mode. Press H to return to
normal play mode.
, The connecting cords are damaged.
, The system is not connected to the correct TV
input jack (page 23).
, Fast forward or fast reverse is performed.
Press H to return to normal play mode.
, Check the speaker settings (pages 25, 69).
, The video input on the TV is not set so that
you can view pictures from the system.
The left and right sounds are
Picture noise appears.
, The disc is dirty or flawed.
unbalanced or reversed.
, Check that the speakers and components are
connected correctly and securely.
, If the picture output from your system goes
through your VCR to get to your TV, the
copy-protection signal applied to some DVD
programmes could affect picture quality. If
you still experience problems even when you
connect your system directly to your TV, try
connecting your system to your TV’s S-video
input (page 23).
, Adjust the front balance parameter in the
LEVEL menu (pages 29, 69).
Severe hum or noise is heard.
, Check that the speakers and components are
connected securely.
, Check that the connecting cords are away
from a transformer or motor, and at least
3 meters (10 feet) away from a TV set or
fluorescent light.
Even though you set the aspect ratio
in “TV TYPE” of “SCREEN SETUP,”
the picture does not fill the screen.
, The aspect ratio of the disc is fixed on your
DVD.
, Move your TV away from the audio
components.
, The plugs and jacks are dirty. Wipe them with
a cloth slightly moistened with alcohol.
, Clean the disc.
continued
73
Download from Www.Somanuals.com. All Manuals Search And Download.
The sound loses stereo effect when
No sound or only a very low-level
sound is heard from the rear
you play a VIDEO CD, or a CD.
, Set “AUDIO” to “STEREO” in the Control
Menu display (page 47).
speakers.
, Make sure the sound field function is on
(page 49).
, Make sure you connect the system
appropriately.
, Select a sound field containing the word
“cinema” or “virtual” (page 49).
The surround effect is difficult to
hear when you are playing a Dolby
Operation
Digital sound track.
The disc tray indicator is on when
, Make sure the sound field function is on
(page 49).
there is no disc inside.
, If you pressed the 1 to turn off the system
without closing the disc tray, the disc tray
indicator turns on. Wait a while for it to turn
off. If the indicator is still on, press A of
DISC 1-DISC 5 to close the disc tray.
, Check the speaker connections and settings
(pages 25, 69).
, Depending on the DVD, the output signal
may not be the entire 5.1 channel but
monaural or stereo even if the sound track is
recorded in Dolby Digital format.
Radio stations cannot be tuned in.
, Check that the antennas are connected
securely. Adjust the antennas and connect an
external antenna if necessary.
The surround effect is difficult to
hear when you are playing a Dolby
Digital or MPEG audio sound track.
, Check the speaker connections and setting
(pages 25, 69).
, The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
direct tuning.
, Depending on the DVD, the output signal
may not be the entire 5.1 channels. It may be
monaural or stereo even if the sound track is
recorded in Dolby Digital or MPEG audio
format.
, No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the stations
(page 30).
, Press DISPLAY so that the frequency appears
in the display.
The sound comes from the centre
speaker only.
, Depending on the disc, the sound may come
from the centre speaker only.
The remote does not function.
, There are obstacles between the remote and
the system.
, The distance between the remote and the
system is too far.
No sound is heard from the centre
, The remote is not pointed at the remote
sensor on the system.
speaker.
, Make sure the sound field function is on
(page 49).
, The batteries in the remote are weak.
, Select a sound field containing the word
“cinema” or “virtual” (page 49).
The disc does not play.
, There is no disc inside.
, The disc is turned over.
Insert the disc with the playback side facing
down on the disc tray.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
, The disc is skewed.
, The system cannot play CD-ROMs, etc.
(page 8).
The language for the sound track
cannot be changed.
, Multilingual tracks are not recorded on the
DVD being played.
, The DVD prohibits changing the language for
the sound track.
, The region code on the DVD does not match
the system.
, Moisture has condensed inside the system.
Remove the disc and leave the system turned
on for about half an hour (page 4).
The subtitle language cannot be
changed.
The disc does not start playing from
, Multilingual subtitles are not recorded on the
DVD being played.
, The DVD prohibits changing the subtitles.
the beginning.
, Programme Play, Shuffle Play, or Repeat Play
has been selected (pages 37, 39, 40).
Press CLEAR to cancel these functions
before playing a disc.
The subtitle cannot be turned off.
, The DVD prohibits turning off subtitles.
, Resume Play has been selected.
During stop, press x on the system or the
remote and then start DVD playback (page
34).
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
being played. The angle can be changed only
when the “ANGLE” indicator lights up on the
front panel display.
, The title, DVD or PBC menu automatically
appears on the TV screen.
, The DVD prohibits changing the angles.
The system starts playing the disc
automatically.
, The DVD features an auto playback function.
The system does not operate
properly.
, If static electricity, etc., causes the system to
operate abnormally, press POWER on the
system to turn the system off and then on
again.
Playback stops automatically.
, Some discs may contain an auto pause signal.
While playing such a disc, the system stops
playback at the auto pause signal.
A 5-character service number is
You cannot perform some functions
such as Stop, Search, Slow-motion
Play, Repeat Play, Shuffle Play, or
displayed on the screen and on the
front panel display.
, The self-diagnosis function was activated.
(See the table on page 76.)
Programme Play.
, Depending on the disc, you may not be able
to do some of the operations above. See the
operating manual that comes with the disc.
The disc tray does not open and
“LOCKED” appears on the front panel
display.
, Contact your Sony dealer or local authorized
Sony service facility.
Messages do not appear on the
screen in the language you want.
, In the Setup Display, select the desired
language for the on-screen display in “OSD”
under “LANGUAGE SETUP” (page 66).
“PROTECT” appears on the front
panel display.
, The speaker protection circuit is in function.
Check the speaker connection.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-diagnosis Function
(When letters/numbers appear in the
display)
Glossary
Bit rate
Value indicating the amount of video data
compressed in a DVD per second. The unit
is Mbps (Mega bit per second). 1 Mbps
indicates that the data per second is
1,000,000 bits. The higher the bit rate is, the
larger the amount of data. However, this
does not always mean that you can get
higher quality pictures.
When the self-diagnosis function is
activated to prevent the system from
malfunctioning. In this case a five-character
service number (e.g., C 13 00) with a
combination of a letter and digits appears on
the screen and the front panel display. Refer
to the following table.
Chapter
Sections of a picture or a music piece on a
DVD that are smaller than titles. A title is
composed of several chapters. Each chapter
is assigned a chapter number enabling you
to locate the chapter you want.
C:13:00
First three
characters of
the service
number
Cause and/or Corrective
Action
Digital Cinema Sound (DCS)
This is the generic name of the surround
sound produced by digital signal processing
technology developed by Sony. Unlike
previous surround sound fields mainly
directed at the reproduction of music,
Digital Cinema Sound is designed
C 13
The disc is dirty.
, Clean the disc with a soft
cloth (page 9).
C 31
The disc is not inserted
correctly.
specifically for the enjoyment of movies.
, Re-insert the disc
correctly.
Dolby Digital
E XX
To prevent a malfunction, the
This sound format for movie theaters is
more advanced than Dolby Pro Logic
Surround. In this format, the rear speakers
output stereo sound with an expanded
frequency range and a subwoofer channel
for deep bass is independently provided.
This format is also called “5.1” because the
subwoofer channel is counted as 0.1 channel
(since it functions only when a deep bass
effect is needed). All six channels in this
format are recorded separately to realize
superior channel separation. Furthermore,
since all the signals are processed digitally,
less signal degradation occurs.
(xx is a number) system has performed the self-
diagnosis function.
, Contact your nearest Sony
dealer or local authorized
Sony service facility and
give the 5-character
service number.
Example: E 61 10
76
Download from Www.Somanuals.com. All Manuals Search And Download.
The audio data is recorded in Dolby Digital
as well as in PCM, allowing you to enjoy
more real audio presence.
Furthermore, various advanced functions
such as the multi-angle, multilingual, and
Parental Control functions are provided with
the DVD.
Dolby Pro Logic Surround
As one method of decoding Dolby
Surround, Dolby Pro Logic Surround
produces four channels from two-channel
sound. Compared with the former Dolby
Surround system, Dolby Pro Logic Surround
reproduces left-to-right panning more
naturally and localizes sounds more
Multi-angle function
precisely. To take full advantage of Dolby
Pro Logic Surround, you should have one
pair of rear speakers and a centre speaker.
The rear speakers output monaural sound.
Various angles, or viewpoints of the video
camera, for a scene are recorded on some
DVDs.
Multilingual function
DTS
Several languages for the sound or subtitles
in a picture are recorded on some DVDs.
Digital audio compression technology that
the Digital Theater Systems, Inc. developed.
This technology conforms to 5.1-channel
surround. The rear channel is stereo and
there is discrete subwoofer channel in this
format. DTS provides the same 5.1 discrete
channels of high quality digital audio. The
good channel separation is realized because
the all channel data is recorded discrete and
processed in digital.
Parental Control
A function of the DVD to limit playback of
the disc by the age of the users according to
the limitation level in each country. The
limitation varies from disc to disc; when it is
activated, playback is completely prohibited,
violent scenes are skipped or replaced with
other scenes and so on.
DVD
Playback Control (PBC)
A disc that contains up to 8 hours of moving
pictures even though its diameter is the same
as a CD.
Signals encoded on VIDEO CDs (Version
2.0) to control playback.
By using menu screens recorded on VIDEO
CDs with PBC functions, you can enjoy
playing simple interactive programmes,
programmes with search functions, and so
on.
The data capacity of a single-layer and
single-sided DVD, at 4.7 GB (Giga Byte), is
7 times that of a CD. Furthermore, the data
capacity of a dual-layer and single-sided
DVD is 8.5 GB, a single-layer and double-
sided DVD 9.4 GB, and a dual-layer and
double-sided DVD 17 GB.
Region Code
The picture data uses the MPEG 2 format,
one of the worldwide standards of digital
compression technology. The picture data is
compressed to about 1/40 of its original size.
The DVD also uses the variable rate coding
technology that changes the data to be
allocated according to the status of the
picture.
This system is used to protect copyrights. A
region number is allocated on each DVD
system or DVD disc according to the sales
region. Each region code is shown on the
system as well as on the disc packaging. The
system can play the discs that match its
region code. The system can also play discs
ALL
with the “ ” mark. Even when the region
code is not shown on the DVD, the region
limit may still be activated.
continued
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Title
The longest sections of a picture or a music
piece on a DVD; a movie, etc., for a picture
piece on video software; or an album, etc.,
for a music piece on an audio software.
Each title is assigned a title number enabling
you to locate the title you want.
Track
Sections of a picture or a music piece on a
CD or VIDEO CD. Each track is assigned a
track number enabling you to locate the
track you want.
VIDEO CD
A compact disc that contains moving
pictures.
The picture data uses the MPEG 1 format,
one of the worldwide standards of digital
compression technology. The picture data is
compressed to about 1/140 of its original
size. Consequently, a 12 cm VIDEO CD can
contain up to 74 minutes of moving pictures.
VIDEO CDs also contain compact audio
data. Sounds outside the range of human
hearing are compressed while the sounds we
can hear are not compressed. VIDEO CDs
can hold 6 times the audio information of
conventional audio CDs.
There are 2 versions of VIDEO CDs.
• Version 1.1: You can play only moving
pictures and sounds.
• Version 2.0: You can play high-resolution
still pictures and enjoy PBC functions.
This system conforms to both versions.
Super Audio CD (SACD)
This audio format is based upon the current
audio CD standards but includes a greater
amount of information which provides
higher quality sound. There are three types
of discs: single layer, double layer and
hybrid discs. The hybrid disc contains both
standard audio CD and Super Audio CD
information.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 120 – 10,000 Hz; rated
50 watts per channel minimum RMS power, with no more than 10 %
total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
Stereo mode
Surround mode
50 W + 50 W (6 ohms at 1 kHz, THD 10 %)
Front: 50 W + 50 W
Center*: 50 W
Rear*: 50 W + 50 W (6 ohms at 1 kHz, THD 10 %)
Subwoofer*: 100 W (3 ohms at 100 Hz, THD 10 %)
* Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog)
VIDEO 1, 2:
Sensitivity: 150 mV
Impedance: 50 kilohms
VIDEO 2 (optical):
Sensitivity: –
VIDEO 1 (AUDIO OUT):
Voltage: 2 V
Inputs (Digital)
Outputs (Analog)
Impedance: 1 kilohms
PHONES:
Accepts low- and high-impedance headphones
DIGITAL OUT (CD)
Sensitivity: –
Outputs (Digital)
SACD/DVD system
Laser
Semiconductor laser
(SACD: λ = 650 nm)
(CD: λ = 780 nm)
Emission duration: continuous
NTSC or NTSC/PAL
Signal format system
Frequency response (at 2 CH STEREO mode)
DVD (PCM): 2 Hz to 22 kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0 dB)
More than 80 dB (VIDEO 1 (AUDIO) connectors only)
Less than 0.03 %
Signal-to-noise ratio
Harmonic distortion
FM tuner section
System
North American model:
Other models:
PLL quartz-locked digital synthesizer system
87.5 – 108.0 MHz (100 kHz step)
87.5 – 108.0 MHz (50 kHz step)
FM wire antenna
Antenna
Antenna terminals
Intermediate frequency
75 ohms, unbalanced
10.7 MHz
AM tuner section
System
Tuner section:
PLL quartz-locked digital synthesizer system
Tuning range
North American model:
530 – 1,710 kHz (with the interval set at 10 kHz)
531 – 1,710 kHz (with the interval set at 9 kHz)
European, Middle Eastern, and Philipinne models:
531 – 1,602 kHz (with the interval set at 9 kHz)
Other models:
Antenna
531 – 1,602 kHz (with the interval set at 9 kHz)
530 – 1,710 kHz (with the interval set at 10 kHz)
Loop antenna
continued
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Video section
Inputs
VIDEO: 1 Vp-p 75 ohms
Outputs
VIDEO: 1 Vp-p 75 ohms
S-VIDEO: Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT: Y: 1 Vp-p 75 ohms
PB, PR: 0.7 Vp-p 75 ohms
Speakers
Front
Speaker system
Speaker unit
Bass reflex
70 mm (2 7/8 inches) dia. cone type, 15 mm (5/8 inches) dia. balance dome
Rated impedance
Dimensions (approx.)
Mass (approx.)
6 ohms
100 × 100 × 110 mm (4 × 4 × 4 3/8 inches) (w/h/d)
0.86 kg (2 lb 6 oz)
Centre/Rear
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Bass reflex
70 mm (2 7/8 inches) dia. cone type
6 ohms
100 × 100 × 110 mm (4 × 4 × 4 3/8 inches) (w/h/d)
0.85 kg (2 lb 6 oz)
Subwoofer
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Bass reflex
180 mm (7 1/8 inches) dia. cone type
3 ohms
200 × 390 × 355 mm (7 7/8 × 15 3/8 × 14 inches) (w/h/d)
6.4 kg (14 lb 13 oz)
General
Power requirements
North American model:
European model:
Australian and Asian models:
Mexican model:
120 V AC, 60 Hz
220 – 240 V AC, 50/60 Hz
220 – 240 V AC, 50/60 Hz
120 V AC, 60 Hz
Chinese model:
220 V AC, 50/60 Hz
Other models:
110 – 240 V/ 220 – 240 V AC, 50/60 Hz
Power consumption
European model:
105 W
1.5 W (in the standby mode)
Other models:
Dimensions (approx.)
105 W
355 × 100 × 394 mm (14 × 4 × 15 5/8 inches) (w/h/d) incl. projecting
parts
Mass (approx.)
5.7 kg (12 lb 10 oz)
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
Operating temperature
Operating humidity
Supplied accessories
See page 17.
Design and specifications are subject to change without notice.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
For details, see pages 47, 53, 67.
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027 Afar
1183 Irish
1347 Maori
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1061 Bislama
1066 Bengali;
Bangla
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1358 Maltese
1363 Burmese
1365 Nauru
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1313 Latin
1326 Lingala
1327 Laothian
1332 Lithuanian
1334 Latvian; Lettish
1345 Malagasy
1369 Nepali
1376 Dutch
1525 Telugu
1527 Tajik
1528 Thai
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto; Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1543 Twi
1557 Ukrainian
1564 Urdu
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-Croatian
1503 Singhalese
1505 Slovak
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1171 Faroese
1174 French
1181 Frisian
1506 Slovenian
1703 Not specified
81
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu List
You can set the following items with the DVD setup menu.
The order of the displayed items may be different from the actual display.
LANGUAGE SETUP
SCREEN SETUP
OSD
(Select the language you
TV TYPE
16:9
want to use from the
displayed language list.)
4:3 LETTER
BOX
4:3 PAN SCAN
ON
OFF
JACKET
PICTURE
GRAPHICS
BLUE
DVD MENU (Select the language you
want to use from the
SCREEN SAVER
BACKGROUND
displayed language list.)
AUDIO
(Select the language you
want to use from the
displayed language list.
When you select
BLACK
ORIGINAL, you can
enjoy the language given
priority on the disc.)
SPEAKER SETUP
SIZE
FRONT
CENTER
YES
YES
NONE
BEHIND
SUBTITLE
(Select the language you
want to use from the
displayed language list.
When you select AUDIO
FOLLOW, the setting is
automatically switched to
the language selected in
AUDIO.)
REAR
LOW
HIGH
SIDE
LOW
HIGH
NONE
SUBWOOFER YES
DISTANCE** FRONT
1 m ~15 m/
3 ft ~ 50 ft
0 m ~15 m/
0 ft ~ 50 ft
0 m ~15 m/
0 ft ~ 50 ft
CENTER
CUSTOM SETUP
REAR
COLOR
SYSTEM*
AUTO
PAL
BALANCE
LEVEL
FRONT
REAR
CENTER
REAR
6 steps left or right
6 steps left or right
–6 dB ~ +6 dB
PAUSE
MODE
PARENTAL LEVEL
CONTROL
AUTO
FRAME
NTSC
OFF
8.
–6 dB ~ +6 dB
SUBWOOFER –6 dB ~ +6 dB
7. NC17
TEST
TONE
OFF
ON
6.
5.
R
4. PG13
* Only for Asian models and Australian models.
**In SPEAKER SETUP, the North American
model's OSD displays both metric and imperial
measurements.The other model's displays metric
measurements only. The manual also shows both.
3.
2.
1.
PG
G
STANDARD USA
OTHERS
CHANGE PASSWORD
OFF
TRACK
SELECTION AUTO
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
16:9 67
4:3 LETTER BOX 67
4:3 PAN SCAN 67
I
S
INDEX 42
Index 7
SACD 78
S VIDEO 23
Scan 41
SCENE 42
Scene 7
L
A
LANGUAGE SETUP 66
LEVEL 29, 71
Locating
SCREEN SAVER 68
SCREEN SETUP 67
SHUFFLE 39
Shuffle Play 39
SIZE 69
ADVANCED 54
AMP MENU 26
ANGLE 52
a specific Point
by watching the TV screen 41
Antenna Hookups 21
AUDIO 47, 66
Slow-motion Play 41
Sound Field 49
SPEAKER SETUP 69
Speaker System Hookup 18
SUBTITLE 53, 66
M
B
MEMORY 30
BACKGROUND 68
BALANCE 28, 71
BAND 30
Multi-angle function 52
Multilingual function 53
MUTING 33
Batteries 18
Bit rate 54, 76
T
N
TEST TONE 72
TIME SEARCH 42
TIME 44
NAME 63
C
CD 32
CHAPTER 42
Chapter 7, 76
Continuous play
CD/VIDEO SACD CD
DVD 32
Control Menu 15
CUSTOM PARENTAL
CONTROL 55
COLOR SYSTEM 68
CUSTOM SETUP 68
O
TIME/TEXT 43
TITLE 35, 42
Title 7, 78
Title menu 35
TRACK 42
One Disc or All Discs 37
On-screen display
Control Menu display 15
Setup Display 65
OSD 66
Track 7, 78
TRACK SELECTION 69
Troubleshooting 73
TV and Video Component
Hookups 23
P
PARENTAL CONTROL 56, 69,
77
TV TYPE 67
PAUSE MODE 69
PBC Playback 36, 77
PLAY MODE 37
Preset Station 30, 63
Programme Play 37
D
U
DIMMER 29
Usable discs 7
Disc changer system 10
DISTANCE 70
Dolby Digital 76
Dolby Pro Logic Surround 77
DTS 77
V
Q
VIDEO CD 36, 78
Quick Overview 17
DVD 35, 77
DVD MENU 35, 66
R
Radio 62
RDS 63
F
Rear Panel 13
Region code 8, 77
Remote 14, 60
REPEAT 40
RESET 66
Front Panel 11
Fast forward 41
Fast reverse 41
Front panel display 12
Resume Play 34
H
Handling discs 9
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|