Sony Blu ray Player BDP S360 User Manual

4-135-579-11(1)  
The software of this player may be updated in the future. To find out details on any  
TM  
Operating Instructions  
Blu-ray Disc / DVD Player  
BDP-S360  
4-135-579-11(1)  
Printed in Malaysia  
© 2009 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Owner’s Record  
CAUTION  
The model and serial numbers are  
located at the rear of the unit.  
Record the serial number in the  
space provided below. Refer to  
them whenever you call upon your  
Sony dealer regarding this product.  
You are cautioned that any  
changes or modifications not  
expressly approved in this manual  
could void your authority to  
operate this equipment.  
WARNING  
To reduce the risk of fire or electric  
shock, do not expose this apparatus  
to rain or moisture.  
The shielded Interface cable (LAN  
cable) must be used with the  
equipment in order to comply with  
the limits for a digital device  
pursuant to Subpart B of Part 15 of  
FCC Rules.  
Model No. BDP-S360  
Serial No.______________  
To avoid electrical shock, do not  
open the cabinet. Refer servicing to  
qualified personnel only.  
For customers in the USA  
If this product is not working  
properly, please call 1-866-909-  
7669.  
Batteries or batteries installed  
apparatus shall not be exposed to  
excessive heat such as sunshine,  
fire or the like.  
b
This equipment has been tested  
and found to comply with the  
limits for a Class B digital device,  
pursuant to Part 15 of the FCC  
Rules. These limits are designed to  
provide reasonable protection  
against harmful interference in a  
residential installation. This  
equipment generates, uses, and can  
radiate radio frequency energy  
and, if not installed and used in  
accordance with the instructions,  
may cause harmful interference to  
radio communications. However,  
there is no guarantee that  
For Customers in Canada  
If this product is not working  
properly, please call 1-877-602-  
2008 for Peace of Mind  
Warranty Replacement  
service.  
For other product related questions  
please contact our Customer  
Information Service Center at  
1-877-899-7669 or write to us at:  
Customer Information Service 115  
Gordon Baker Road, Toronto,  
Ontario, M2H 3R6  
CAUTION  
The use of optical instruments with  
this product will increase eye  
hazard. As the laser beam used in  
this Blu-ray Disc/DVD player is  
harmful to eyes, do not attempt to  
disassemble the cabinet.  
Refer servicing to qualified  
personnel only.  
interference will not occur in a  
particular installation. If this  
equipment does cause harmful  
interference to radio or television  
reception, which can be  
determined by turning the  
equipment off and on, the user is  
encouraged to try to correct the  
interference by one or more of the  
following measures:  
This label is located on the laser  
protective housing inside the  
enclosure.  
– Reorient or relocate the  
receiving antenna.  
– Increase the separation between  
the equipment and receiver.  
– Connect the equipment into an  
outlet on a circuit different from  
that to which the receiver is  
connected.  
– Consult the dealer or an  
experienced radio/TV technician  
for help.  
This symbol is  
intended to alert the  
user to the presence  
of uninsulated  
“dangerous voltage”  
Precautions  
• To prevent fire or shock hazard,  
do not place objects filled with  
liquids, such as vases, on the  
apparatus.  
• Install this unit so that the AC  
power cord can be unplugged  
from the wall socket  
within the product’s enclosure that  
may be of sufficient magnitude to  
constitute a risk of electric shock to  
persons.  
This symbol is  
intended to alert the  
user to the presence  
immediately in the event of  
trouble.  
of important  
operating and  
maintenance (servicing)  
instructions in the literature  
accompanying the appliance.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
• If the player is brought directly  
from a cold to a warm location,  
or is placed in a very damp  
room, moisture may condense  
on the lenses inside the player.  
Should this occur, the player  
may not operate properly. In  
this case, remove the disc and  
leave the player turned on for  
about half an hour until the  
moisture evaporates.  
Notes About the Discs  
• To keep the disc clean, handle  
the disc by its edge. Do not  
touch the surface.  
Dust, fingerprints, or scratches  
on the disc may cause it to  
malfunction.  
Precautions  
The power requirements and  
power consumption of this  
player are indicated on the back  
of the player. Check that the  
player’s operating voltage is  
identical with your local power  
supply.  
• Do not install the player in an  
inclined position. It is  
Power requirements and  
power consumption  
m
designed to be operated in a  
horizontal position only.  
• Keep the player and the discs  
away from equipment with  
strong magnets, such as  
microwave ovens, or large  
loudspeakers.  
• Do not place heavy or unstable  
objects on the player.  
• Do not place any objects other  
than discs on the disc tray.  
Doing so may cause damage to  
the player or the object.  
• When you move the player,  
take out any discs. If you  
don’t, the disc may be  
• Do not expose the disc to  
direct sunlight or heat sources  
such as hot air ducts, or leave it  
in a car parked in direct  
sunlight as the temperature  
may rise considerably inside  
the car.  
• After playing, store the disc in  
its case.  
• Clean the disc with a cleaning  
cloth. Wipe the disc from the  
center out.  
On safety  
• To prevent fire or shock  
hazard, do not place objects  
filled with liquids, such as  
vases, on the player, or place  
the player near water, such as  
near a bathtub or shower room.  
Should any solid object or  
liquid fall into the cabinet,  
unplug the player and have it  
checked by qualified  
damaged.  
• When you move the player,  
disconnect the AC power cord  
and all other cables from the  
player.  
personnel before operating it  
any further.  
• Do not touch the AC power  
cord with wet hands. Doing so  
may cause an electric shock.  
On power sources  
• The player is not disconnected  
from the AC power source as  
long as it is connected to the  
wall outlet, even if the player  
itself has been turned off.  
• If you are not going to use the  
player for a long time, be sure  
to disconnect the player from  
the wall outlet. To disconnect  
the AC power cord, grasp the  
plug itself; never pull the cord.  
• Observe following points to  
prevent the AC power cord  
being damaged. Do not use the  
AC power cord if it is  
• Do not use solvents such as  
benzine, thinner,  
On placement  
• Place the player in a location  
with adequate ventilation to  
prevent heat build-up in the  
player.  
commercially available disc/  
lens cleaners, or anti-static  
spray intended for vinyl LPs.  
• If you have printed the disc’s  
label, dry the label before  
playing.  
• Do not use the following discs.  
– A lens cleaning disc.  
– A disc that has a non-  
standard shape (e.g., card,  
heart).  
• Do not place the player on a  
soft surface such as a rug that  
might block the ventilation  
holes.  
• Do not install this player in a  
confined space, such as a  
bookshelf or similar unit.  
• Do not place the player in a  
location near heat sources, or  
in a place subject to direct  
sunlight, excessive dust, or  
mechanical shock.  
– A disc with a label or sticker  
on it.  
damaged, as doing so may  
result in an electric shock or  
fire.  
– Do not pinch the AC power  
cord between the player and  
wall, shelf, etc.  
– A disc that has cellophane  
tape or sticker adhesive on it.  
• Do not resurface the playing  
side of a disc to remove  
surface scratches.  
• Do not place the player  
outdoors, in vehicles, on ships,  
or on other vessels.  
– Do not put anything heavy  
on the AC power cord or pull  
on the AC power cord itself.  
,continued  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
• “AVCHD” and the “AVCHD”  
logo are trademarks of  
Panasonic Corporation and  
Sony Corporation.  
• Java and all Java-based  
trademarks and logos are  
trademarks or registered  
trademarks of Sun  
For the model supplied  
with the AC plug adaptor  
If the AC plug of your unit does  
not fit into the wall outlet, attach  
the supplied AC plug adaptor.  
IMPORTANT NOTICE  
Caution: This player is  
capable of holding a still  
video image or on-screen  
display image on your  
television screen  
indefinitely. If you leave the  
still video image or on-  
screen display image  
displayed on your TV for an  
extended period of time you  
risk permanent damage to  
your television screen.  
Plasma display panel  
televisions and projection  
televisions are susceptible to  
this.  
Microsystems, Inc.  
, “XMB,” and “xross media  
bar” are trademarks of Sony  
Corporation and Sony  
On adjusting volume  
Do not turn up the volume while  
listening to a section with very  
low level inputs or no audio  
signals. If you do, the speakers  
may be damaged when a peak  
level section is played.  
Computer Entertainment Inc.  
• This product incorporates  
High-Definition Multimedia  
Interface (HDMI™)  
technology. HDMI, the HDMI  
logo and High-Definition  
Multimedia Interface are  
trademarks or registered  
trademarks of HDMI  
On cleaning  
Clean the cabinet, panel, and  
controls with a soft cloth. Do not  
use any type of abrasive pad,  
scouring powder or solvent such  
as alcohol or benzine.  
If you have any questions or  
problems concerning your  
player, please consult your  
nearest Sony dealer.  
Licensing LLC.  
• “Blu-ray Disc” is a trademark.  
• “Blu-ray Disc,” “DVD+RW,”  
“DVD-RW,” “DVD+R,”  
“DVD-R,” “DVD VIDEO,”  
and “CD” logos are  
Important Safety  
Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near  
water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation  
openings. Install in accordance  
with the manufacturer’s  
instructions.  
8) Do not install near any heat  
sources such as radiators, heat  
registers, stoves, or other  
apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety  
purpose of the polarized or  
grounding-type plug. A  
polarized plug has two blades  
with one wider than the other.  
A grounding type plug has two  
blades and a third grounding  
prong. The wide blade or the  
third prong are provided for  
your safety. If the provided  
plug does not fit into your  
outlet, consult an electrician for  
replacement of the obsolete  
outlet.  
On cleaning discs, disc/  
lens cleaners  
Do not use cleaning discs or  
disc/lens cleaners (including wet  
or spray types). These may cause  
the apparatus to malfunction.  
trademarks.  
• “BD-LIVE,” “BD-LIVE”  
logo, and “BONUSVIEW” are  
trademarks of Blu-ray Disc  
Association.  
• “x.v.Color” and “x.v.Color”  
logo are trademarks of Sony  
Corporation.  
• “BRAVIA Sync” and  
“BRAVIA Sync” logo are  
trademarks of Sony  
On replacement of parts  
In the events that this player is  
repaired, repaired parts may be  
collected for reuse or recycling  
purposes.  
Corporation.  
• “PhotoTV HD” and the  
“PhotoTV HD” logo are  
trademarks of Sony  
Copyrights and  
Trademarks  
• This product incorporates  
copyright protection  
Corporation.  
• This product meets ENERGY  
technology that is protected by  
U.S. patents and other  
intellectual property rights.  
Use of this copyright  
protection technology must be  
authorized by Macrovision,  
and is intended for home and  
other limited viewing uses  
only unless otherwise  
authorized by Macrovision.  
Reverse engineering or  
disassembly is prohibited.  
®
STAR guidelines for energy  
efficiency.  
ENERGY STAR and the  
ENERGY STAR mark are  
registered U.S. marks.  
ENERGY STAR is a  
registered mark owned by the  
U.S. government.  
• Other system and product  
names are generally  
trademarks or registered  
trademarks of the  
10)Protect the power cord from  
being walked on or pinched  
particularly at plugs,  
convenience receptacles, and  
the point where they exit from  
the apparatus.  
manufacturers. ™ and ®  
marks are not indicated in this  
document.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
11)Only use attachments/  
accessories specified by the  
manufacturer.  
12)Use only with the cart, stand,  
tripod, bracket, or table  
specified by the manufacturer,  
or sold with the apparatus.  
When a cart is used, use caution  
when moving the cart/  
• NEED-to-know information  
(to prevent incorrect  
operation) is listed under the  
b icon. NICE-to-know  
information (tips and other  
useful information) is listed  
under the z icon.  
apparatus combination to avoid  
injury from tip-over.  
13)Unplug this apparatus during  
lightning storms or when  
unused for long periods of  
time.  
14)Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus  
has been damaged in any way,  
such as power-supply cord or  
plug is damaged, liquid has  
been spilled or objects have  
fallen into the apparatus, the  
apparatus has been exposed to  
rain or moisture, does not  
operate normally, or has been  
dropped.  
About this manual  
• In this manual, “disc” is used  
as a general reference for the  
BDs, DVDs, or CDs unless  
otherwise specified by the text  
or illustrations.  
• Icons, such as  
, listed  
BD  
at the top of each explanation  
indicate what kind of media  
can be used with the function  
being explained.  
For details, see “Playable  
• Instructions in this manual  
describe the controls on the  
remote. You can also use the  
controls on the player if they  
have the similar symbols as  
those on the remote.  
• The on-screen display  
illustrations used in this  
manual may not match the  
graphics displayed on your TV  
screen.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before operating the player, please read “Terms and Conditions of Use and End User License  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
A THEATER (page 16)  
Switches to the optimum video mode for  
watching movies automatically. When  
connected with an AV amplifier  
(receiver) using the HDMI cable, the  
speaker output also switches  
automatically.  
Guide to Parts and  
Controls  
For more information, see the pages in  
parentheses.  
When connected with a Theater Mode-  
compatible TV using the HDMI cable,  
the TV’s video mode switches to Theater  
Mode.  
Remote  
b
The THEATER button functions only when  
connected to a Sony Theater Mode-compatible  
AV amplifier (receiver) or Sony Theater  
Mode-compatible TV.  
TV INPUT (TV input select)  
Switches between TV and other input  
sources.  
TV [/1 (on/standby) (page 26)  
Turns on the TV, or sets to standby mode.  
[/1 (on/standby) (page 27)  
Turns on the player, or sets to standby  
mode.  
B Number buttons (page 33, 52)  
Enters the title/chapter numbers, etc.  
VOL (volume) +/– (page 26)  
Adjusts the TV volume.  
Displays the elapsed/remaining playback  
time in the front panel display. Each time  
you press the button, the display switches  
between elapsed playback time and  
remaining playback time.  
Selects the language track when multi-  
lingual tracks are recorded on BD-  
ROMs/DVD VIDEOs.  
Selects the sound track on CDs.  
SUBTITLE (page 47)  
Number 5, AUDIO, VOL +, and N PLAY buttons  
have a tactile dot. Use the tactile dot as a reference  
when operating the player.  
Selects the subtitle language when multi-  
lingual subtitles are recorded on BD-  
ROMs/DVD VIDEOs.  
ANGLE  
Switches to other viewing angles when  
multi-angles are recorded on BD-ROMs/  
DVD VIDEOs.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
C Color buttons (RED/GREEN/  
BLUE/YELLOW)  
m/M (fast reverse/fast  
forward)  
Fast reverses/fast forwards the disc when  
pressed during playback.  
Each time you press the button, search  
speed changes as follows*:  
Playback direction  
M1 (×10) t M2 (×30) t M3  
(×120)  
Short cut keys for selecting items on  
some BD’s menus (can also be used for  
BD’s Java interactive operations).  
D TOP MENU (page 32)  
Opens or closes the BD’s or DVD’s Top  
Menu.  
Opens or closes the BD-ROM’s Pop-up  
Menu, or the DVD’s menu.  
Reverse direction  
n (×1) t m1 (×10) t m2 (×30)  
t m3 (×120)  
When you press and hold the button, fast  
forward/fast reverse continues at the  
selected speed until you release the  
button.  
* Search speed does not change when playing  
CDs and MP3 audio tracks.  
Speed multiple values are approximate.  
– To resume normal playback, press  
N PLAY.  
OPTIONS (page 32, 37)  
The options menu that can be selected  
appears on the screen.  
HOME (page 30, 39)  
Enters the player’s home menu.  
Exits the home menu when a CD is  
inserted.  
RETURN  
Returns to the previous display.  
To play in slow, freeze frame (playback  
direction only)  
</M/m/,  
Moves the highlight to select a displayed  
item.  
Plays BDs/DVDs in slow motion when  
M is pressed for more than one second  
in pause mode.  
Plays one frame at a time when M is  
pressed briefly in pause mode.  
– To resume normal playback, press  
N PLAY.  
Center button (ENTER)  
Enters the selected item.  
E . PREV/NEXT > (previous/  
next)  
Skips to the previous/next chapter, track,  
or file.  
To go to the beginning of the previous  
track, press . PREV twice.  
Starts or re-starts playback.  
Resumes playback from the point where  
you press x STOP (Resume Play).  
Plays a slideshow when a disc containing  
JPEG image files is inserted.  
REPLAY/ADVANCE  
(instant replay/instant advance)  
Replays the scene/briefly fast forwards  
the scene.  
DISPLAY (page 34)  
Displays the playback information on the  
screen.  
Each time you press ADVANCE  
,
briefly fast forwards the current scenes  
for 15 seconds.  
X PAUSE  
Pauses or re-starts playback.  
Each time you press  
REPLAY,  
briefly replays the current scenes for 10  
seconds.  
x STOP  
Stops playback and remembers the stop  
point (resume point) (page 31, 36).  
The resume point for a title/track is the  
last point you played or the last photo for  
a photo folder.  
,continued  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Front panel  
The N button has a tactile dot. Use the tactile dot as a reference when operating the player.  
A [/1 (on/standby) (page 27)  
Turns on the player, or sets to standby  
mode.  
To lock the disc tray (Child Lock)  
You can lock the disc tray to prevent it being  
opened by mistake.  
When the player is turned on, hold down N  
on the player for more than 10 seconds until  
“LOCKED” appears in the front panel  
display. The disc tray is locked.  
B Disc tray (page 30)  
C Blu-ray Disc indicator  
Lights up in white when the player is  
turned on.  
Lights up in blue when playing BDs.  
To unlock the disc tray, hold down N on the  
player until “UNLOCK” appears in the front  
panel display.  
D Front panel display (page 11)  
E Remote sensor (page 26)  
F N (play), x (stop) (page 30)  
Starts or stops playback.  
G Z (open/close) (page 30)  
Opens or closes the disc tray.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Front panel display  
A N, X  
F Network connection indicator  
Lights up when accessing the network  
and downloading the player’s software.  
For details on downloading the player’s  
software, see page 40.  
Lights up during playback or pause.  
Lights up when outputting 720p/1080i/  
1080p video signals from the HDMI  
OUT jack or 720p/1080i video signals  
from the COMPONENT VIDEO OUT  
jacks.  
Lights up when an HDMI device is  
recognized.  
Lights up when the external memory is  
recognized.  
E Playback information  
You can check the time information.  
Press TIME repeatedly during playback.  
The display changes as follows.  
When playing a BD-ROM/DVD VIDEO  
Elapsed time of the current title  
r
Remaining time of the current title  
When playing a CD  
Elapsed time of the current track  
r
Remaining time of the current track  
r
Elapsed time of the current disc*  
r
Remaining time of the current disc*  
* Except MP3 audio tracks  
z
“T” (Title or Track), “C” (Chapter), or “D”  
(Disc) may be displayed depending on the  
disc.  
,continued  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Rear panel  
A DIGITAL OUT (COAXIAL) jack  
F EXT slot (page 23)  
G AC IN terminal (page 25)  
B LINE OUT (R-AUDIO-L) jacks  
H COMPONENT VIDEO OUT  
(Y, PB, PR) jacks (page 17)  
C LINE OUT (VIDEO) jack (page 18)  
I HDMI OUT jack (page 15, 20)  
D DIGITAL OUT (OPTICAL) jack  
J LAN (100) terminal (page 24)  
E Ventilation holes  
The ventilation fan is inside the player.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hooking Up the Player  
Check that you have the following items.  
• Audio/video cable (phono plug ×3) (1)  
• AC power cord (1)  
• Remote commander (remote) (1)  
• Size AA (R6) batteries (2)  
Follow steps 1 through 7 to hook up and  
adjust the settings of the player. Do not  
connect the AC power cord until you reach  
Hookups and  
Settings  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Step 1: Connecting to Your TV  
About video/HDMI OUT jacks  
The player has the following video jacks. Connect the player to your TV according to the input  
jacks on your TV.  
When connecting the player to your TV using the HDMI cable, you can enjoy high quality  
digital pictures and sound through the HDMI OUT jack.  
Jack type  
Video resolution  
Hookup  
High  
quality  
Digital  
High Definition:  
1080/24p, 1080p,  
1080i, 720p  
Standard Definition:  
480p, 480i  
Analog  
High Definition:  
1080i, 720p  
See “Connecting to  
component video jacks  
Standard Definition: (Y, Pb, Pr)” (page 17).  
480p, 480i  
Standard Definition: See “Connecting to  
480i  
audio/video jacks”  
Standard  
quality  
b
To connect to a TV with DVI input  
Use an HDMI-DVI converter cable (not  
supplied). The DVI jack will not accept any  
audio signals, so you have to use another  
audio connection in addition to this  
connection (page 19).  
• Plug in cables securely to prevent unwanted  
noise.  
• Refer to the instructions supplied with the  
components to be connected.  
• You cannot connect this player to a TV that does  
not have a video input jack.  
Furthermore, you cannot connect the HDMI  
OUT jack to DVI jacks that are not HDCP  
compliant (e.g., DVI jacks on PC displays).  
• Do not apply too much pressure on the connecting  
cables. Pushing against the cabinet wall, etc., may  
damage the cables or jacks.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to an HDMI jack  
Connect the player and your TV using an HDMI cable to enjoy high quality digital pictures and  
sound through the HDMI OUT jack.  
If you connect a Sony TV that is compatible with the “Control for HDMI” function (page 16),  
refer to the operating instructions supplied with the TV.  
If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable.  
Blu-ray Disc/DVD player  
HDMI cable (not supplied)  
TV  
• Be sure to disconnect the HDMI cable when  
moving the player.  
Notes on connecting to the HDMI OUT jack  
Observe the following as improper handling  
may damage the HDMI OUT jack and the  
connector.  
• Carefully align the HDMI OUT jack on the  
rear of the player and the HDMI connector  
by checking their shapes. Make sure the  
connector is not upside down or tilted.  
• If you place the player on a cabinet with the  
HDMI cable connected, do not apply too  
much pressure to the cabinet wall. It may  
damage the HDMI OUT jack or the HDMI  
cable.  
• When connecting or disconnecting, do not  
screw in or rotate the HDMI connector.  
About indicators for HDMI connection  
When the connected HDMI-compatible  
component is recognized, the HDMI  
indicator lights up in the front panel display.  
,continued  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
b
• Language Follow  
• Not all high definition television sets are fully  
compatible with this product and may cause  
artifacts to be displayed in the picture. In the case  
of 480i/480p/720p/1080i/1080p scan picture  
problems, it is recommended that the user switch  
the connection to the LINE OUT VIDEO jack. If  
there are questions regarding our TV set  
compatibility with this model 480i/480p/720p/  
1080i/1080p Blu-ray Disc/DVD player, please  
contact our customer service center.  
When you change the language for the on-  
screen display on your TV, the player’s  
language for the on-screen display is also  
changed after turning the player off and on.  
To prepare for the BRAVIA Sync features  
Set “Control for HDMI” to “On” in the  
“System Settings” setup (page 50).  
For details on settings of your TV or other  
connected components, refer to the operating  
instructions supplied with the TV or  
components.  
• If the picture is not clear, not natural or not to your  
satisfaction, change the video output resolution in  
step 3 of “Output Video Format” under the  
“Video Settings” setup (page 42).  
• Be sure to use only an HDMI cable that bears the  
HDMI logo.  
z
• When connecting the Sony TV that is compatible  
with the “Control for HDMI” Easy Setting  
function using the HDMI cable, the “Control for  
HDMI” setting of the player automatically  
switches to “On” if the “Control for HDMI”  
setting on the connected TV is set to “On.” Refer  
to the operating instructions supplied with the  
TV.  
About the BRAVIA Sync  
features (for HDMI connections  
only)  
By connecting Sony components that are  
compatible with the “Control for HDMI”  
function with an HDMI cable (not supplied),  
operation is simplified as below:  
• One-Touch Play  
With one touch of the following buttons, the  
connected TV turns on and the input  
selector on the TV is switched to the player  
automatically.  
• When connecting the Sony TV that is compatible  
with the BRAVIA Sync features using the HDMI  
cable, you can control the basic functions of the  
player with the TV’s remote if the “Control for  
HDMI” setting on the connected TV is set to  
“On.” Refer to the operating instructions supplied  
with the TV.  
b
Depending on the connected component, the  
“Control for HDMI” function may not work. Refer  
to the operating instructions supplied with the  
component.  
[/1  
– HOME: The home menu appears  
automatically (page 9, 30, 39).  
N PLAY: Playback starts automatically  
• System Power-Off  
When you turn off the TV using TV [/1 or  
the power button on the TV’s remote, the  
player and HDMI-compatible components  
turn off automatically.  
• Theater  
When you press THEATER, the player  
automatically switches to the optimum  
video mode for watching movies. When  
connected with a Sony AV amplifier  
(receiver) using the HDMI cable, the  
speaker output also switches automatically.  
When connected with a Theater Mode-  
compatible TV using the HDMI cable, the  
TV’s video mode switches to Theater  
Mode. Press the button again to return to the  
original setting.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Connecting to component video jacks (Y, PB, PR)  
Connect the COMPONENT VIDEO OUT jacks of the player and your TV using a component  
video cable (not supplied). You can enjoy high-quality pictures.  
Be sure to connect to the LINE OUT (R-AUDIO-L) jacks using the audio/video cable.  
Blu-ray Disc/DVD player  
(green)  
(blue)  
(red)  
(red)  
(white)  
Component video  
cable (not supplied)  
Audio/video cable  
(supplied)  
(green)  
(blue)  
(red)  
(red)  
(white)  
Match the color of the plug to  
that of the jack.  
Match the color of the plug to  
that of the jack.  
TV  
: Signal flow  
b
When you connect the player and TV using a  
component video cable, disconnect the video plug  
(yellow) of the audio/video cable.  
,continued  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to audio/video jacks  
Connect the LINE OUT (VIDEO, R-AUDIO-L) jacks of the player and your TV using the  
audio/video cable. You can enjoy standard quality pictures and sound.  
Blu-ray Disc/DVD player  
(red)  
(white)  
(yellow)  
Audio/video cable  
(supplied)  
(red)  
(white)  
(yellow)  
Match the color of the plug to  
that of the jack.  
TV  
: Signal flow  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Step 2: Connecting to Your AV Amplifier (Receiver)  
About audio/HDMI OUT jacks  
The player has the following audio jacks. Connect the player to your AV amplifier (receiver)  
according to the input jacks on your AV amplifier (receiver).  
Jack type  
Hookup  
Digital  
Analog  
z
For correct speaker location, refer to the operating  
instructions supplied with the connected  
components.  
,continued  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to an HDMI jack  
If your AV amplifier (receiver) has an HDMI input, use this connection. You can enjoy higher  
quality sound from the connected AV amplifier (receiver).  
To enjoy 7.1 channel sound, use a High Speed HDMI cable.  
If you connect a Sony AV amplifier (receiver) that is compatible with the “Control for HDMI”  
function (page 16), refer to the operating instructions supplied with the AV amplifier (receiver).  
Blu-ray Disc/DVD player  
HDMI cable (not supplied)  
AV amplifier (receiver)  
HDMI cable (not supplied)  
TV  
z
1 Connect the HDMI OUT jack of the  
Check the following settings:  
– “Audio Output Priority” is set to “HDMI” in the  
“Audio Settings” setup (page 44).  
player and your AV amplifier  
(receiver).  
– “Audio (HDMI)” is set to “Auto” in the “Audio  
Settings” setup (page 44).  
2 Set “BD Audio Setting” to “Direct” in  
the “Audio Settings” setup (page 45).  
To enjoy the secondary audio  
(commentary), set “BD Audio Setting”  
to “Mix.”  
b
Not all HDMI-compatible AV amplifiers  
(receivers) accept 8ch Linear PCM signals. Refer as  
well to instructions supplied with the connected AV  
amplifier (receiver).  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to digital jacks (OPTICAL/COAXIAL)  
*1  
*2  
If your AV amplifier (receiver) has a Dolby Digital, Dolby Pro Logic, or DTS decoder and  
a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS  
(5.1ch) surround effects.  
Blu-ray Disc/DVD player  
or  
Coaxial digital cable  
(not supplied)  
Optical digital cable  
(not supplied)  
AV amplifier (receiver)  
: Signal flow  
*1  
*2  
1 Connect the digital jack of the player  
and your AV amplifier (receiver).  
2 Set “Audio Output Priority” to  
“Coaxial/Optical” in the “Audio  
Settings” setup (page 44).  
3 Make the appropriate settings in  
“Dolby Digital” and “DTS” under the  
“Audio Settings” setup (page 45).  
Otherwise, no sound or a loud noise will  
come from your speakers.  
,continued  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to audio L/R jacks  
If your AV amplifier (receiver) only has L and R audio input jacks, use this connection.  
Blu-ray Disc/DVD player  
(red)  
(white)  
Audio/video cable (supplied)  
(red)  
(white)  
Match the color of the plug to  
that of the jack.  
AV amplifier (receiver)  
: Signal flow  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
b
• Insert the external memory straight. If you force  
the external memory into the slot, this will cause  
damage to both the external memory and the  
player.  
• Keep the external memory away from small  
children to prevent them from accidentally  
swallowing the external memory.  
• Do not apply too much pressure to the external  
memory in the slot, as it may cause a malfunction.  
• We recommend use of the Sony USM2GL  
available as of April 2009.  
• Other USB flash devices may support this  
function. However we cannot guarantee  
compatibility with all USB flash memories.  
• When inserting a USB flash memory other than  
Sony USM2GL, check the insertion direction  
before inserting it.  
Step 3: Inserting the  
External Memory  
To enjoy additional content (such as  
BONUSVIEW/BD-LIVE) on certain Blu-ray  
Disc titles, you will need to use external  
memory (not supplied).  
Insert the external memory device (1 GB or  
larger USB flash memory, such as Sony  
USM2GL, USM4GL, or USM1GH) into the  
EXT slot as your local storage.  
Insert the external memory in the V  
direction into the EXT slot as far as it will  
go.  
Check that the EXT indicator lights up in the  
front panel display when turning the player  
on.  
• Depending on the USB flash memory, it may  
stick out from the EXT slot. Do not force into the  
slot or apply pressure to the protruding portion of  
the USB flash memory.  
• Do not connect anything other than a USB flash  
memory to the EXT slot.  
Rear of the player  
• To avoid data corruption or damage to the  
external memory, turn the player off when  
inserting or removing the external memory.  
• When the EXT indicator does not light up, turn  
the player off, remove and re-insert the external  
memory, then turn the player on again.  
• Do not insert the external memory that contains  
photo or music files to avoid corrupting the  
external memory data.  
Sony USM2GL  
(not supplied)  
With the logo side up  
• When re-formatting the USB flash memory, use  
FAT16 or FAT32 format.  
To remove the external memory  
1
2
Press [/1 to turn the player off.  
Pull out the external memory from the  
EXT slot.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
When connecting to a  
Step 4: Connecting to  
the Network  
broadband router directly  
Blu-ray Disc/DVD player  
Connect the LAN (100) terminal of the player  
to your Internet source using a LAN cable to  
update the player’s software. You can also  
enjoy the BD-LIVE function (page 32).  
1 Connect the LAN (100) terminal of the  
player to your Internet source.  
Methods to connect to your Internet  
source include:  
• Connecting to a broadband router  
directly  
LAN cable  
(not supplied)  
• Connecting via a wireless LAN router  
Refer also to the instructions supplied  
with the broadband router or the wireless  
LAN router.  
Broadband router  
To PC  
2 Make the appropriate settings in  
“Internet Settings” under the  
“Network Settings” setup (page 51).  
LAN cable  
(not supplied)  
To update the player’s software using the  
network  
ADSL modem/  
Cable modem  
b
Do not connect a phone line to the LAN (100)  
terminal, as it may cause a malfunction.  
To enjoy the BD-LIVE function  
Internet  
b
About LAN cables  
To enjoy the BD-LIVE function, we recommend  
using an Internet connection with an effective speed  
of 1 Mbps or greater, depending on your connection  
environment and network condition.  
Depending on the modem or router, the type  
of LAN cable, straight or crossing, differs.  
For details on the LAN cables, refer to the  
operating instructions supplied with the  
modem or router.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
When connecting via a  
wireless LAN router  
Step 5: Connecting the  
AC Power Cord  
Blu-ray Disc/DVD player  
After all of the other connections are  
complete, connect the supplied AC power  
cord to the AC IN terminal of the player.  
Then plug the player and TV AC power cords  
into the AC outlet.  
LAN cable  
(not supplied)  
to AC IN  
1
2
Ethernet/wireless  
LAN media converter  
to AC outlet  
To PC  
Wireless LAN router  
(access point)  
LAN cable  
(not supplied)  
ADSL modem/  
Cable modem  
Internet  
b
Do not connect the LAN terminal of the player to  
the LAN terminal of the PC.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Controlling TVs with the  
remote  
Step 6: Preparing the  
Remote  
You can control the volume, input source,  
and power switch of your Sony TV with the  
supplied remote.  
You can control the player using the supplied  
remote. Insert two Size AA (R6) batteries by  
matching the 3 and # ends on the batteries  
to the markings inside the battery  
b
When you replace the batteries of the remote, the  
code number may be reset to the default setting. Set  
the appropriate code number again.  
compartment. When using the remote, point  
it at the remote sensor  
on the player  
TV [/1  
TV INPUT  
VOL +/–  
Number  
buttons  
b
• Use the batteries correctly to avoid possible  
leakage and corrosion. Should leakage occur, do  
not touch the liquid with bare hands. Observe the  
following:  
– Do not use a new battery with an old battery, or  
batteries of different manufacturers.  
– Do not attempt to recharge the batteries.  
– If you do not intend to use the remote for an  
extended period of time, remove the batteries.  
– If battery leakage occurs, wipe out any liquid  
inside the battery compartment, and insert new  
batteries.  
Available buttons  
Depending on the connected unit, you may  
not be able to control your TV with some or  
all of the buttons (TV [/1, TV INPUT, or  
VOL +/–).  
Buttons  
Operations  
TV [/1  
Turns your TV on or off.  
• Do not expose the remote sensor (marked  
the front panel) to strong light, such as direct  
on  
TV INPUT (TV  
input select)  
Switches your TV’s input  
source between the TV  
and other input sources.  
sunlight or a lighting apparatus. The player may  
not respond to the remote.  
VOL (volume) +/ Adjusts the volume of  
your TV.  
To control other TVs with the remote  
You can control the volume, input source,  
and power switch of non-Sony TVs as well.  
If your TV is listed in the table below, set the  
appropriate manufacturer’s code.  
b
If you enter a new code number, the code number  
previously entered will be erased.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
1
While holding down TV [/1, enter the  
TV’s manufacturer code using the  
number buttons.  
Step 7: Easy Setup  
For instance, to enter “09,” press “0” then  
“9.”  
Follow the steps below to make the minimum  
number of basic adjustments for using the  
player. If you do not complete Easy Setup, it  
will appear each time you turn on your  
player.  
Code numbers of controllable TVs  
If more than one code number is listed,  
try entering them one at a time until you  
find the one that works with your TV.  
Make the settings below in the following  
order.  
Manufacturer  
Sony  
Code number  
When turned on for the first time  
Wait for a short while before the player  
turns on and starts Easy Setup.  
01 (default)  
Hitachi  
02  
04  
13  
04  
19  
21  
16  
10  
20  
18  
07  
LG/Goldstar  
Mitsubishi/MGA  
NEC  
[/1  
TV [/1  
Panasonic  
Philips  
Pioneer  
RCA  
Samsung  
Sharp  
</M/m/,,  
ENTER  
Toshiba  
HOME  
2
Release TV [/1.  
1 Turn on the TV.  
2 Press [/1 to turn on the player.  
The player turns on after a moment.  
3 Switch the input selector on your TV so  
that the signal from the player  
appears on your TV screen.  
The display for OSD language selection  
appears.  
• If the display for OSD language  
selection does not appear  
Press HOME, and select “Easy Setup”  
in the “Setup” setup (page 53). Then,  
select “Start,” and press ENTER.  
,continued  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4 Select a language for the on-screen  
displays using M/m, and press  
ENTER.  
7 Make the appropriate settings  
depending on the cables connected to  
your TV.  
When you select “HDMI” in step 6  
1Select “Start,” and press ENTER.  
The test screen appears for about 30  
seconds.  
Example: when the video output  
resolution is set to 1080i  
The initial settings message appears.  
5 Select “Start,” and press ENTER.  
Current video output resolution setting  
b
If no picture appears, press RETURN to  
return to step 6, and select “Component  
Video.”  
6 Select the cable type used to connect  
the player and your TV, and press  
ENTER.  
2Select “Finish,” and press ENTER.  
The display asks for confirmation.  
3Select “OK” or “Cancel,” and press  
ENTER.  
When you select “Component Video” in  
step 6  
1Select a video output resolution for  
the connected TV, and press ENTER.  
For details about the video output  
resolution, see page 43.  
b
When connecting the HDMI OUT jack and  
other video output jacks at the same time,  
select “Component Video.”  
The test screen appears for about 30  
seconds. For the test screen, see  
(above).  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
b
10 Select “Finish,” and press ENTER.  
If no picture appears, press RETURN to  
return to the previous screen, and change  
the resolution setting.  
2Select “Finish,” and press ENTER.  
The display asks for confirmation.  
3Select “OK” or “Cancel,” and press  
ENTER.  
When you select “Video” in step 6  
Select an aspect ratio that matches your  
TV, and press ENTER.  
z
• You can reset settings to their factory settings  
• You can run “Easy Setup” again from “Easy  
Setup” in “Setup” (page 53).  
Select “16:9” when connecting to a wide-  
screen TV or a TV with a wide mode  
function.  
Select “4:3” when connecting to a 4:3  
screen TV without a wide mode function.  
8 Select “Allow” to allow Internet  
connections from BD contents, and  
press ENTER.  
Select “Do not allow” to not allow  
Internet connections from BD contents.  
9 Set “Quick Start Mode” to “On” or  
“Off,” and press ENTER.  
For details about “Quick Start Mode,”  
see page 50.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing BDs/DVDs  
BD  
DVD  
Number  
buttons  
</M/m/,,  
ENTER  
OPTIONS  
HOME  
N PLAY  
x STOP  
X PAUSE  
1 Switch the input selector on your TV so  
that the signal from the player  
appears on your TV screen.  
Playback  
2 Press Z on the player, and place a  
disc on the disc tray.  
Playing side facing down  
3 Press Zon the player to close the disc  
tray.  
• When you insert a commercially  
available BD-ROM or DVD VIDEO,  
playback automatically starts  
depending on the disc.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
b
4 Press HOME.  
• The point where you stopped playing is cleared  
from memory when:  
5 Select “Video” using </,.  
– you open the disc tray,  
– you play another title,  
– you change the settings on the player, or  
– you remove the external memory (for BD-  
ROMs).  
6 Select  
using M/m, and press  
N PLAY or ENTER.  
• The player may not resume playback depending  
on the disc or stop point.  
To play restricted BDs or DVDs (Parental  
Control)  
When you play a restricted BD, change the  
“BD Parental Control” setting in the “BD/  
DVD Viewing Settings” setup (page 47).  
When you play a restricted DVD, the display  
for entering your password appears on the  
screen.  
Enter your four-digit password using the  
number buttons, and press ENTER.  
Playback starts.  
For commercially available BD-ROMs  
or DVD VIDEOs, playback starts.  
For BDs or DVDs recorded on other  
equipment, the title list appears. Select a  
title using M/m, and press N PLAY or  
ENTER.  
Playback starts.  
To register or change the password, see  
To stop playback  
Press x STOP.  
To play restricted BD-REs or BD-Rs (Disc  
Lock)  
When you play a BD-RE or BD-R restricted  
by the Disc Lock function, the display for  
entering your password appears on the  
screen.  
To pause playback  
Press X PAUSE.  
z
In the title list, “PL” (Playlist) is displayed next to  
the name of titles that are created and edited from  
their originals.  
1
Enter the four-digit password that has  
been registered when creating the disc  
using the number buttons, and press  
ENTER.  
b
• Depending on the disc you may not be able to do  
some of the playback operations. Refer to the  
instruction manual supplied with the disc.  
• Depending on BDs or DVDs recorded on other  
equipment, title lists or title names may not be  
displayed.  
2
Select a title, and press N PLAY or  
ENTER.  
Playback starts.  
One-Touch Play (for HDMI connection  
only)  
To resume playback from the point where  
you stopped (Resume Play)  
Press N PLAY.  
After stopping playback, select  
using M/  
The player and the connected TV turn on and  
the input selector on the TV is switched to the  
player, then playback starts automatically.  
m, and press N PLAY or ENTER.  
The player resumes playback from the point  
where you pressed x STOP.  
b
To start from the beginning, press OPTIONS  
to select “Play from beginning,” and press  
ENTER. Playback starts from the beginning  
of the title.  
• When using the HDMI connection, there may be  
a delay before the playback picture appears on the  
screen, and the beginning portion of the playback  
picture may not be displayed.  
• To use the One-Touch Play function, set “Control  
for HDMI” to “On” (default) in the “System  
Settings” setup (page 50).  
,continued  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Available OPTIONS  
Using the BD’s or DVD’s menu  
1
Press OPTIONS.  
The options menu appears.  
BD DVD  
2
Select an item using M/m, and press  
ENTER.  
The available items differ depending on  
the disc type or player situation.  
To display Top Menu  
When you play a BD or DVD, you can  
display the Top Menu.  
1
2
Press TOP MENU during playback.  
The Top Menu appears.  
Items  
Details  
Video Settings Adjusts settings for  
Select an item using </M/m/,.  
picture (page 34).  
Audio Settings Adjusts settings for  
To display Pop-up Menus  
Some BD-ROMs contain Pop-up Menus that  
appear without interrupting playback.  
Title List  
Play  
Displays the title list.  
1
2
Press POP UP/MENU during playback.  
The Pop-up Menu appears.  
Plays the title from the  
point where you pressed  
x STOP.  
Select an item using </M/m/,, color  
buttons, or the number buttons, and  
follow the on-screen instructions.  
Play from  
beginning  
Plays the title from the  
beginning.  
Top Menu  
Displays the disc’s Top  
Enjoying BONUSVIEW/BD-LIVE  
Menu/Popup Displays the BD-  
Menu  
ROM’s Pop-up Menu or  
DVD’s menu (page 32).  
BD  
Some BD-ROMs with “BD-LIVE Logo*”  
have bonus contents and other data that can  
be downloaded to the external memory (local  
storage) for enjoyment.  
Stop  
Stops playback.  
Title Search  
Searches for a title and  
starts playback from the  
*
Chapter  
Search  
Searches for a chapter  
and starts playback  
from the beginning  
1 If a disc is inserted, remove the disc  
from the player.  
2 Turn the player off.  
3 Insert the external memory (not  
supplied) into the EXT slot on the rear  
of the player.  
The external memory is used as the local  
storage.  
Make sure that the external memory is  
properly inserted into the player  
4 Connect the player to a network  
5 Turn the player on.  
6 Set “BD Internet Connection” to  
“Allow” in the “BD/DVD Viewing  
Settings” setup (page 49).  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
7 Insert a BD-ROM with BONUSVIEW/  
BD-LIVE.  
Searching for a Title/Chapter  
The operation method differs depending  
on the disc. Refer to the instruction  
manual supplied with the disc.  
BD  
DVD  
You can search for a chapter if the title  
contains chapter marks.  
To delete data in the external memory  
1 Press OPTIONS during playback or in  
pause mode.  
You can delete unnecessary data.  
1
If a disc is inserted, remove the disc from  
the player.  
The options menu appears.  
2 Select a search method using M/m,  
2
3
4
Press HOME.  
and press ENTER.  
“Title Search” (for BD-ROMs/DVD  
VIDEOs)  
“Chapter Search”  
Select “Video” using </,.  
Select “BD Data” using M/m, and press  
ENTER.  
The display for entering the number  
appears.  
Example: Chapter Search  
5
Select the disc name, and press  
OPTIONS.  
6
7
Select “Erase,” and press ENTER.  
Select “OK,” and press ENTER.  
The data of the selected disc will be  
deleted.  
z
• To delete all data in the external memory at once,  
select “Erase All” in step 6.  
• Press ENTER instead of OPTIONS in step 5 to  
skip step 6.  
3 Enter the number of the title or chapter  
using the number buttons.  
b
• The downloaded contents may not be displayed  
depending on the disc, if you delete the Shared  
Cache Data.  
If you make a mistake, press “0”  
repeatedly to erase the entered number,  
then re-enter another number.  
• Depending on the BD-ROM, the disc name may  
not be displayed.  
4 Press ENTER.  
After a while, the player starts playback  
from the selected number.  
,continued  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Displaying the playing time and  
play information  
Adjusting pictures and sound  
for videos  
DVD  
DVD  
BD  
BD  
You can check the title information,  
including the video transmission rate, etc.  
To adjust the picture  
1
2
Press OPTIONS during playback.  
The options menu appears.  
Press DISPLAY.  
The displayed information differs depending  
on the disc type and player status.  
Select “Video Settings” using M/m, and  
press ENTER.  
The “Video Settings” screen appears.  
Example: when playing a BD-ROM  
3
Select an item using M/m, and press  
ENTER.  
The default settings are underlined.  
Items  
Details  
A The current selected angle  
PictureQuality Selects the picture  
Mode  
(Standard/  
Brighter Room  
settings for different  
lighting environments.  
B Title number or name  
/
)
C The currently selected audio or subtitle  
Theater Room  
setting  
FNR  
(Off/Auto)  
Reduces random noise  
appearing in the picture.  
D Available functions (  
audio/ subtitle)  
angle/  
BNR  
(Off/Auto)  
Reduces mosaic-like  
block noise in the  
picture.  
E Playback information  
Displays Disc type/Play mode/Video  
codec/Bit rate/Playing status bar/  
Playing time (Remaining time*)  
MNR  
(Off/Auto)  
Reduces minor noise  
around the picture  
outlines (mosquito  
noise).  
F Output resolution/Video frequency  
4
Select or adjust the settings using </M/  
m/,, and press ENTER.  
To adjust any other items, repeat steps 3  
* Displayed when you press TIME repeatedly.  
z
• You can also check the playback information in  
the front panel display (page 11).  
• Press SUBTITLE, AUDIO, or ANGLE, and you  
can check each type of information.  
b
• Set the picture setting of your TV to ‘Standard’  
before changing the “Picture Quality Mode”  
settings.  
• “Video Settings” is not available when the  
connected TV is set to Theater Mode (page 16).  
• Depending on the disc or the scene being played,  
“FNR,” “BNR” or “MNR” effects may be hard to  
discern.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
To adjust the audio characteristics  
Playing Music CDs and  
MP3 Audio Tracks  
1
Press OPTIONS during playback.  
The options menu appears.  
2
Select “Audio Settings” using M/m, and  
press ENTER.  
The “Audio Settings” screen appears.  
*1  
*2  
*3  
DATA BD  
DATA DVD  
DATA CD  
CD  
*1  
*2  
BD-REs/BD-Rs containing MP3 audio tracks  
DVD-ROMs and DVD+RWs/DVD+Rs/DVD-  
RWs/DVD-Rs containing MP3 audio tracks  
CD-ROMs and CD-RWs/CD-Rs containing  
MP3 audio tracks  
*3  
1 Insert a music CD.  
The Music Player screen appears.  
2 Press N PLAY.  
3
Select an item using M/m, and press  
ENTER.  
Playback starts.  
The default settings are underlined.  
Items  
Details  
AV SYNC  
(short) 0 ~  
120 msec  
(long)  
Adjusts the gap between  
picture and sound, by  
delaying the sound  
output in relation to the  
picture output (0 to  
120 milliseconds).  
Audio Filter  
(for analog  
audio signals  
only)  
• Sharp: Provides a  
wide frequency range  
and spatial feeling.  
Normally select this.  
• Slow: Provides  
smooth and warm  
sound.  
To select a music CD track  
1
2
3
Press HOME.  
Select  
(Music) using </,.  
Select , and press ENTER.  
The music list appears.  
4
Select or adjust the settings using </  
,, and press ENTER.  
To adjust any other items, repeat steps 3  
4
Select a track using M/m, and press  
N PLAY or ENTER.  
To select an MP3 album or track  
b
1
Insert a disc containing MP3 audio  
tracks.  
• The “Audio Filter” function does not work for  
digital audio signals output from the HDMI OUT/  
DIGITAL OUT (OPTICAL/COAXIAL) jacks.  
• There may be little effect by changing the “Audio  
Filter” setting depending on the disc or playback  
environment.  
2
3
Select  
(Music) using </,.  
Select , and press ENTER.  
The list of albums and tracks appears.  
4
Select an album or track using M/m, and  
press ENTER.  
When you select an album, select a track  
in the album using M/m, and press  
N PLAY or ENTER.  
To play an entire album, select the  
album, and press N PLAY.  
,continued  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
b
Available OPTIONS  
• The point where you stopped playing (resume  
point) is cleared from memory when:  
– you open the disc tray, or  
1
Press OPTIONS.  
The options menu appears.  
– you turn off the player.  
• The player can play the following MP3 audio  
tracks.  
– Format: MPEG-1 Audio Layer 3  
– Sampling frequency: 32 kHz/44.1 kHz/48 kHz  
– Number of channels: 2ch Max  
– Bit rate: 64 kbps to 320 kbps  
– File size: 1 GB Max  
2
Select an item using M/m, and press  
ENTER.  
The available items differ depending on  
the situation.  
Items  
Details  
Play  
Plays the selected track.  
– Playing time: 1 sec to 9,000 sec  
– Extension: .mp3/.MP3  
– Number of tracks: Up to 500 tracks (incl.  
albums if any)  
Play from  
beginning  
Plays the current track  
from the beginning  
(music CDs only).  
Stop  
Stops playing the track.  
• The player does not recognize the following MP3  
albums/tracks.  
Various music playback operations  
– MP3 albums/tracks with extremely long names  
– MP3 albums containing MP3 audio tracks with  
extremely long names  
Buttons  
Operations  
N PLAY  
Starts or re-starts playback.  
Resumes playback from the  
point where you pressed  
x STOP (except MP3 audio  
tracks).  
x STOP  
Stops playback.  
Pauses playback.  
X PAUSE  
. PREV/  
NEXT >  
Skips to the beginning of the  
current or next track. To go  
to the previous track press  
. PREV twice.  
m/M  
TIME  
Fast reverses/fast forwards  
when pressed during  
playback.  
Switches time information  
on the screen and the front  
panel display (page 11).  
AUDIO  
Selects stereo or monaural  
tracks (except MP3 audio  
tracks).  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Available OPTIONS during playback  
Playing Photo Files  
1
Press OPTIONS during playback.  
The options menu appears.  
*1  
*2  
*3  
DATA BD  
DATA DVD  
DATA CD  
2
Select an item using M/m, and press  
ENTER.  
The available items differ depending on  
the situation.  
*1  
*2  
BD-REs/BD-Rs containing JPEG image files  
DVD-ROMs and DVD+RWs/DVD+Rs/DVD-  
RWs/DVD-Rs containing JPEG image files  
CD-ROMs and CD-RWs/CD-Rs containing  
JPEG image files  
*3  
Items  
Details  
Slideshow  
Speed  
Changes the slideshow  
speed.  
• Fast  
• Normal  
• Slow  
1 Press HOME.  
2 Select  
(Photo) using </,.  
Stop  
Stops a slideshow.  
Rotate Left  
Rotates the photo  
counterclockwise by 90  
degrees.  
Rotate Right  
Rotates the photo  
clockwise by 90  
degrees.  
3 Select , and press ENTER.  
Various photo playback operations  
The file list or folder list appears.  
Buttons  
Operations  
x STOP  
Stops a slideshow.  
RETURN  
X PAUSE  
Pauses a slideshow.  
. PREV/  
NEXT >  
</,  
Displays the previous or  
next photo.  
DISPLAY  
Displays the file  
information.  
4 Select a file or folder using M/m, and  
press ENTER.  
When you select a folder, select a file in  
the folder using M/m, and press ENTER.  
The selected photo file is displayed.  
• To play a slideshow, press N PLAY.  
,continued  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
b
• When you attempt to play the following photo  
files, the  
mark appears on the screen and they  
cannot be played.  
– photo files larger than 8,192 pixels (width or  
height)  
– photo files smaller than 15 pixels (width or  
height)  
– photo files exceeding 32 MB  
– photo files with extreme aspect ratios (greater  
than 50:1 or 1:50)  
– photo files in Progressive JPEG format  
– photo files that have a “.jpeg” or “.jpg”  
extension, but not in JPEG format  
– photo files that have an extremely long name  
• The following photo files cannot be played.  
– photo files recorded on BD-Rs in any format  
other than UDF (Universal Disk Format) 2.6  
– photo files recorded on BD-REs in any format  
other than UDF (Universal Disk Format) 2.5  
• The following photo files or folders cannot be  
displayed in the file list or folder list.  
– photo files that have an extension other than  
“.jpeg” or “.jpg”  
– photo files that have an extremely long name  
– photo files in the 5th tree or lower  
– 501th or more folders when the total number of  
folders and files in a single tree exceeds 500  
• Photo files edited on a PC may not be played.  
• Thumbnail images of some photo files may not be  
displayed.  
• Large photo files may take some time to display  
or to start a slideshow.  
To view best quality images  
If you have a Sony TV compatible with  
“PhotoTV HD,” you can enjoy best quality  
images by the following connection and  
setting.  
1
2
Connect the player to the TV using an  
HDMI cable (not supplied).  
Set the TV’s video setting to [VIDEO-A]  
mode.  
For details on [VIDEO-A], refer to the  
operating instructions supplied with the  
TV.  
b
You can enjoy “PhotoTV HD” only when “HDMI  
Resolution” of the player is set to “Auto,” “1080i,”  
or “1080p” in the “Video Settings” setup (page 43).  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Settings  
Displays  
Select  
(Setup) on the home menu when  
you need to change the settings of the player.  
1 Press HOME.  
2 Select  
(Setup) using </,.  
3 Select the setup category icon to  
change using M/m, and press ENTER.  
For details on setting options and setup  
category icons, see “Setting list”  
Example: Video Settings  
Settings and  
Adjustments  
4 Set the options.  
,continued  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setting list  
You can setup the following options.  
Network Update  
Icon  
Explanation  
You can update and improve the functions of  
the player.  
For information about update functions, refer  
to the following website;  
Network Update (page 40)  
Updates the software of the  
player.  
Video Settings (page 41)  
Makes the video settings  
according to the type of  
connecting jacks.  
1 Select “Network Update” using M/m,  
and press ENTER.  
Audio Settings (page 44)  
Makes the audio settings  
according to the type of  
connecting jacks.  
The player connects to the network, and  
the display asks for confirmation.  
2 Select “OK” using </,, and press  
BD/DVD Viewing Settings  
Makes detailed settings for BD/  
DVD playback.  
ENTER.  
The player starts downloading, then  
updating the software automatically.  
When updating finishes, “FINISH”  
appears for 5 seconds in the front panel  
display, then the player automatically  
turns off.  
Photo Settings (page 49)  
Makes the photo-related settings.  
System Settings (page 50)  
Makes the player-related  
settings.  
3 Press [/1 to turn on the player.  
The player starts up with the updated  
software.  
Network Settings (page 51)  
Makes detailed settings for  
Internet and network.  
z
Easy Setup (page 53)  
Re-runs the Easy Setup to make  
the basic settings.  
• The “VUP */9” counter (“*” indicates update  
step) in the front panel display also shows  
progress of the update.  
• You can check the current software version by  
selecting “System Information” in the “System  
Settings” setup (page 51).  
• The “Setup” settings remain after updating.  
• The player informs you of newer software version  
information when “Software Update  
Notification” is set to “On” (default) (page 51).  
Resetting (page 53)  
Resets the player to the factory  
settings.  
b
• Do not disconnect the AC power cord or LAN  
cable while downloading or updating software.  
• Any operations, including opening the disc tray,  
are not available while updating.  
• Downloading times may differ depending on the  
server provider or line status.  
• When error messages on network connections  
appear, check the network settings (see “Internet  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To update the software using an update  
disc  
You can update and improve the functions of  
the player using an update disc provided by  
Sony dealer or local authorized Sony service  
facility.  
Video Settings  
The default settings are underlined.  
1
2
Insert the update disc.  
The display asks for confirmation.  
TV Type  
Selects your TV type.  
Select “OK,” and press ENTER.  
Software update starts.  
When updating finishes, “FINISH”  
appears for 5 seconds in the front panel  
display, then the disc tray automatically  
opens.  
16:9  
4:3  
Select this when connecting  
to a wide-screen TV or a TV  
with a wide mode function.  
Select this when connecting  
to a 4:3 screen TV without a  
wide mode function.  
3
4
Remove the disc.  
The player automatically turns off.  
Press [/1 to turn the player on.  
The player starts up with the updated  
software.  
Screen Format  
Selects the display configuration for a 4:3  
screen picture on a 16:9 wide screen TV.  
z
Original  
Select this when connecting  
to a TV with a wide mode  
function. Displays a 4:3  
screen picture in 16:9 aspect  
ratio even on a wide-screen  
TV.  
• The “VUP */9” counter (“*” indicates update  
step) in the front panel display also shows  
progress of the update.  
• You can check the current software version by  
selecting “System Information” in the “System  
Settings” setup (page 51).  
• The “Setup” settings remain after updating.  
• For information about other software update  
methods, refer to the following website or consult  
your nearest Sony dealer or local authorized Sony  
Service facility;  
Fixed Aspect Changes the picture size to  
Ratio  
fit the screen size with the  
original picture aspect ratio.  
b
• Do not disconnect the AC power cord while  
updating.  
• Any operations, including opening the disc tray,  
are not available while updating.  
,continued  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
DVD Aspect Ratio  
Output Video Format  
Selects the display configuration for  
playback of 16:9 screen pictures on a 4:3  
screen TV (selectable when “TV Type” is set  
to “4:3” and “Screen Format” is set to “Fixed  
Aspect Ratio”).  
Selects the jack type to output video signals  
(“TV Connection Method”) and output  
resolution(“HDMIResolution”/“Component  
Resolution”).  
1
2
Select “Output Video Format” in “Video  
Settings,” and press ENTER.  
Letter Box  
Displays a wide picture with  
black bands on the top and  
bottom.  
Select the jack type to output video  
signals using M/m, and press ENTER.  
Pan & Scan  
Displays a full-height  
picture on the entire screen,  
with trimmed sides.  
b
When connecting the HDMI OUT jack and  
other video output jacks at the same time,  
select “Component Video.”  
Letter Box  
TV Connection Method  
HDMI  
Outputs signals from  
the HDMI OUT jack  
according to the “HDMI  
Resolution” setting  
Pan & Scan  
Component  
Video  
Outputs signals from  
the COMPONENT  
VIDEO OUT jacks  
according to the  
“Component  
b
Depending on the DVD, “Letter Box” may be  
selected automatically instead of “Pan & Scan” or  
vice versa.  
Resolution” setting  
Video  
Outputs signals from  
the LINE OUT VIDEO  
jack.  
Cinema Conversion Mode  
Sets the video conversion method for 480p,  
720p, 1080i, or 1080p* signals from the  
HDMI OUT jack or the COMPONENT  
VIDEO OUT jacks.  
3
(When you select “HDMI” or  
“Component Video” only)  
1Select the signal type for the HDMI  
OUT jack or COMPONENT VIDEO  
OUT jacks using M/m, and press  
ENTER.  
When you change the video output  
resolution, the test screen appears for  
about 30 seconds.  
* HDMI only  
Auto  
Normally select this. The  
player automatically detects  
whether the material is  
video-based or film-based,  
and switches to the  
appropriate conversion  
method.  
b
If no picture appears, press RETURN to  
return to the previous screen, and change  
the resolution setting.  
Video  
The conversion method  
suited for video-based  
material will always be  
selected regardless of the  
material.  
2Select “Finish,” and press ENTER.  
The display asks for confirmation.  
3Select “OK” or “Cancel,” and press  
ENTER.  
Follow the on-screen instructions.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
The HD indicator lights up when  
outputting 720p/1080i/1080p video  
signals.  
BD-ROM 1080/24p Output  
Sets to output 1920 × 1080p/24 Hz video  
signals when playing film-based materials on  
BD-ROMs (720p/24 Hz or 1080p/24 Hz).  
1920 × 1080p/24 Hz video signals can be  
output when all of the following conditions  
are met.  
– You connect a 1080/24p-compatible TV  
using the HDMI OUT jack,  
– “Output Video Format” is set to “HDMI,”  
and  
b
When connecting the HDMI OUT jack and  
other video output jacks at the same time,  
video signals may not output from the jacks,  
other than from the HDMI OUT jack, when  
“Auto” or “1080p” is selected (page 62).  
When connecting other equipment at the same  
time, press RETURN to return to step 2 and  
change the “TV Connection Method” setting.  
HDMI Resolution/Component Resolution  
– “HDMI Resolution” is set to “Auto” or  
“1080p.”  
Auto (HDMI  
only)  
Normally select this.  
The player outputs  
signals starting from the  
highest resolution  
Auto  
Outputs 1920 × 1080p/  
24 Hz video signals only  
when connecting a 1080/  
24p-compatible TV using  
the HDMI OUT jack.  
acceptable to the TV:  
1080p > 1080i > 720p >  
480p > 480i  
If the resulting image  
format is undesirable,  
try another setting that  
suits your TV.  
On  
Off  
Outputs 1920 × 1080p/  
24 Hz video signals  
regardless of the connected  
TV type.  
480i  
Outputs 480i video  
signals.  
Select this when your TV is  
not compatible with 1080/  
24p video signals.  
480p  
720p  
1080i  
Outputs 480p video  
signals.  
b
No BD-ROM picture appears when the connected  
TV is non-compatible with 1080/24p and “BD-  
ROM 1080/24p Output” is set to “On.” In this case,  
press HOME to display the home menu, and change  
the “BD-ROM 1080/24p Output” setting.  
Outputs 720p video  
signals.  
Outputs 1080i video  
signals.  
1080p (HDMI Outputs 1080p video  
only) signals.  
YCbCr/RGB (HDMI)  
Sets the color setting for video signals output  
from the HDMI OUT jack. Select the setting  
that matches the connected TV type.  
Auto  
Automatically detects the  
connected TV type, and  
switches to the matching  
color setting.  
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video  
signals.  
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video  
signals.  
RGB (16-235) Select this when connecting  
to a device that only  
supports RGB limited range.  
RGB (0-255) Select this when connecting  
to an RGB (0-255) device.  
,continued  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
HDMI Deep Color Output  
Audio Settings  
Sets the Deep Color (color depth) setting for  
video signals output from the HDMI OUT  
jack.  
The default settings are underlined.  
The color depth is indicated by the number of  
bits, and more colors can be reproduced as  
the value increases. The player supports a  
color depth of up to 12 bits. Connecting the  
player and a TV that supports Deep Color  
allows more accurate color reproduction than  
when connecting it to a TV that does not  
support Deep Color.  
Audio Output Priority  
Selects the jack type to output audio signals.  
2-channel Linear PCM signals are output at  
48 kHz maximum from output jacks other  
than the priority jacks.  
HDMI  
Outputs audio signals from  
the HDMI OUT jack.  
Auto  
12bit  
10bit  
Off  
Normally select this.  
Coaxial/  
Optical  
Outputs audio signals from  
the DIGITAL OUT  
(OPTICAL/COAXIAL)  
jack.  
Outputs 12bit video signals.  
Outputs 10bit video signals.  
Select this when the picture  
is unstable or colors appear  
unnatural.  
Stereo Analog Outputs audio signals from  
the LINE OUT (R-AUDIO-  
L) jacks.  
x.v.Color Output  
Audio (HDMI)  
Sets whether to send xvYCC information to  
the connected TV.  
Combining xvYCC-compatible video with a  
TV that supports x.v.Color display makes it  
possible to more accurately reproduce object  
colors present in the natural world.  
Selects the signal type for the HDMI OUT  
jack.  
Auto  
Normally select this.  
Outputs audio signals  
according to the status of the  
connected HDMI device.  
Auto  
Off  
Normally select this.  
2ch PCM  
Downmixes to 2-channel  
Linear PCM signals before  
outputting from the HDMI  
OUT jack.  
Select this when the picture  
is unstable or colors appear  
unnatural.  
b
Pause Mode  
Select “2ch PCM” when connecting a TV or an AV  
amplifier (receiver) that does not support Dolby  
Digital or DTS, otherwise noise or no sound may  
result.  
Sets the picture mode for DVD playback  
pause status. For BD-ROMs or discs  
containing AVCHD files, “Pause Mode”  
automatically switches to “Auto.”  
Auto  
Normally select this.  
Dynamic moving pictures  
appear without blurring.  
Frame  
Displays static pictures at  
high resolution.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
BD Audio Setting  
DTS  
Selects whether to mix or not mix interactive  
audio and secondary audio (commentary)  
when playing a BD that contains such audio.  
Selects the audio signals output when playing  
DTS discs. This setting affects the output  
from the DIGITAL OUT (COAXIAL/  
OPTICAL) jack.  
Mix  
Outputs the audio obtained  
by mixing the interactive  
audio and secondary audio  
to the primary audio.  
Downmix  
PCM  
Converts to output Linear  
PCM signals. Select this  
when connecting to an audio  
device without a built-in  
DTS decoder.  
Direct  
Outputs the primary audio  
only.  
DTS  
Select this when connecting  
to an audio device with a  
built-in DTS decoder.  
b
PCM 96 kHz and PCM 192 kHz audio signals are  
output as PCM 48 kHz audio signals when “BD  
Audio Setting” is set to “Mix.”  
48kHz/96kHz PCM  
Audio ATT  
Selects the maximum sampling frequency for  
the PCM signals output from the DIGITAL  
OUT (OPTICAL/COAXIAL) jack.  
Lowers the audio output level to prevent  
sound distortion.  
48kHz/16bit  
Outputs audio signals of  
96 kHz sampling as 48 kHz/  
16 bit.  
On  
Off  
Enables Audio Attenuation.  
Disables Audio Attenuation.  
96kHz/24bit  
Outputs audio signals of  
96 kHz sampling as 96 kHz/  
24 bit. However, the signals  
will be output as 48 kHz/  
16 bit if the source is copy-  
protected.  
b
“Audio ATT” does not affect the output from the  
HDMI OUT jack and the DIGITAL OUT  
(OPTICAL/COAXIAL) jack.  
b
Dolby Digital  
• If you select “96kHz/24bit” when an AV  
amplifier (receiver) that does not support 96 kHz  
is connected, no sound or a loud sound may  
result.  
• “48kHz/96kHz PCM” is not effective when  
“Audio Output Priority” is set to “HDMI” or  
“Stereo Analog.”  
Selects the audio signals output when playing  
Dolby Digital discs.  
This setting affects the output from the  
DIGITAL OUT (COAXIAL/OPTICAL)  
jack.  
Downmix  
PCM  
Converts to output Linear  
PCM signals. Select this  
when connecting an audio  
device without a built-in  
Dolby Digital decoder.  
Dolby Digital Select this when connecting  
an audio device with a built-  
in Dolby Digital decoder.  
,continued  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Audio DRC  
Downmix  
Selects the dynamic range (compression level  
of the sound) setting when playing a BD or  
DVD that conforms to “Audio DRC.”  
Sets the downmix method of multi-channel to  
two-channel sound.  
Dolby  
Surround  
Outputs the Dolby Surround  
(Pro Logic) signals in 2  
channels. Select this when  
connecting an audio device  
that supports Dolby  
Auto  
Performs playback at the  
dynamic range specified by  
the disc (BD-ROM only).  
Other discs are played back  
at the “Standard” level.  
Surround (Pro Logic).  
Normal  
Outputs audio signals  
without Dolby Surround  
(Pro Logic) effect. Select  
this when connecting an  
audio device that does not  
support Dolby Surround  
(Pro Logic).  
Standard  
Performs playback at a  
compression level between  
“TV Mode” and “Wide  
Range.”  
TV Mode  
Sounds are compressed  
heavily. Low sounds are  
easier to hear.  
b
Wide Range  
No compression works. A  
more dynamic sound is  
produced.  
“Downmix” has no effect on the bitstream audio  
output from the DIGITAL OUT (OPTICAL/  
COAXIAL)/HDMI OUT jack.  
b
• “Audio DRC” is effective only when playing  
Dolby Digital, Dolby Digital Plus, and Dolby  
TrueHD audio signals.  
• When “Dolby Digital” is set to “Dolby Digital” in  
the “Audio Settings” setup (page 45), “Audio  
DRC” has no effect on the audio output from the  
DIGITAL OUT (OPTICAL/COAXIAL) jack.  
However, this excludes the following cases.  
– when “BD Audio Setting” is set to “Mix” when  
playing a BD.  
– when “Audio Output Priority” is set to “HDMI”  
or “Stereo Analog.”  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
BD Parental Control  
BD/DVD Viewing  
Settings  
Playback of some BD-ROMs can be limited  
according to the age of the users. Scenes may  
be blocked or replaced with different scenes.  
The default settings are underlined.  
1 Select “BD Parental Control” in “BD/  
DVD Viewing Settings,” and press  
ENTER.  
BD/DVD Menu  
Selects the default menu language for BD-  
ROMs or DVD VIDEOs.  
When you select “Select Language Code,”  
the display for entering the language code  
appears. Enter the code for your language by  
2 Enter your four-digit password using  
the number buttons.  
3 Select “OK,” and press ENTER.  
4 Select the age restriction, and press  
ENTER.  
The lower the value, the stricter the  
limitation.  
If you select “Select Age Restriction,”  
you can enter the age from “0” to “255”  
using </M/m/, or the number  
buttons.  
Audio  
Selects the default track language for BD-  
ROMs or DVD VIDEOs.  
When you select “Original,” the language  
given priority in the disc is selected.  
When you select “Select Language Code,”  
the display for entering the language code  
appears. Enter the code for your language by  
• To cancel the Parental Control setting,  
select “No Restrictions.”  
z
You can change the password (see “Password” on  
page 48).  
Subtitle  
b
• If you forget the password, reset the player  
(page 53) and set a new password (see  
Selects the default subtitle language for BD-  
ROMs or DVD VIDEOs.  
When you select “Select Language Code,”  
the display for entering the language code  
appears. Enter the code for your language by  
• When you play discs which do not have the  
Parental Control function, playback cannot be  
limited on this player.  
• Depending on the disc, you may be asked to  
change the Parental Control level while playing  
the disc. In this case, enter your password, then  
change the level.  
• When “255” is selected in “Select Age  
Restriction,” the Parental Control setting is  
canceled.  
,continued  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
4 Select the area restriction, and press  
ENTER.  
DVD Parental Control  
When you select “Select Region Code,”  
the display for entering the region code  
appears. Enter the code for the area  
restriction by referring to “Parental  
Playback of some DVD VIDEOs can be  
limited according to the age of the users.  
Scenes may be blocked or replaced with  
different scenes.  
1 Select “DVD Parental Control” in “BD/  
DVD Viewing Settings,” and press  
ENTER.  
z
You can change the password (see “Password” on  
page 48).  
2 Enter your four-digit password using  
the number buttons.  
b
• If you forget the password, reset the player  
(page 53) and set a new password (see  
3 Select “OK,” and press ENTER.  
4 Select a level, and press ENTER.  
The lower the value, the stricter the  
limitation.  
• When you play discs which do not have the  
Parental Control function, playback cannot be  
limited on this player.  
• Depending on the disc, you may be asked to  
change the Parental Control level while playing  
the disc. In this case, enter your password, then  
change the level.  
• To cancel the Parental Control setting,  
select “No Restrictions.”  
z
You can change the password (see “Password” on  
Password  
Sets or changes the password for the Parental  
Control function. A password allows you to  
set a restriction on BD-ROM or DVD  
VIDEO playback. If necessary, you can  
differentiate the restriction levels for BD-  
ROMs and DVD VIDEOs.  
b
• If you forget the password, reset the player  
(page 53) and set a new password (see  
• When you play discs which do not have the  
Parental Control function, playback cannot be  
limited on this player.  
• Depending on the disc, you may be asked to  
change the Parental Control level while playing  
the disc. In this case, enter your password, then  
change the level.  
1 Select “Password” in “BD/DVD  
Viewing Settings,” and press ENTER.  
2 Enter your four-digit password using  
the number buttons.  
Parental Control Region Code  
3 Select “OK,” and press ENTER.  
Playback of some BD-ROMs or DVD  
VIDEOs can be limited according to the  
geographic area. Scenes may be blocked or  
replaced with different scenes.  
To change the password  
1
2
After step 3, enter a new password using  
the number buttons.  
1 Select “Parental Control Region  
Code” in “BD/DVD Viewing Settings,”  
and press ENTER.  
Select “OK,” and press ENTER.  
2 Enter your four-digit password using  
the number buttons.  
3 Select “OK,” and press ENTER.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Hybrid Disc Playback Layer  
Photo Settings  
Selects the layer priority when playing a  
Hybrid Disc. To change the setting, turn the  
player off and on again.  
The default setting is underlined.  
BD  
Plays BD layer.  
Slideshow Speed  
DVD/CD  
Plays DVD or CD layer.  
Changes the slideshow speed.  
Fast  
Photos change rapidly.  
BD Internet Connection  
Normal  
Photos change at normal  
speed.  
Sets whether to allow Internet connections  
from the contents of a BD (in BDMV mode)  
being played. Network connections and  
settings are required when using this function  
Slow  
Photos change slowly.  
Allow  
Normally select this.  
Do not allow  
Prohibits Internet  
connection.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Auto Power Off  
System Settings  
The player automatically turns off if you do  
not press any of the buttons on the player or  
remote for more than 30 minutes, unless you  
are playing BDs/DVDs/CDs/photo files or  
are updating software.  
The default settings are underlined.  
OSD  
On  
Turns on the “Auto Power  
Off” function.  
Selects your language for the player on-  
screen displays.  
Off  
Turns off the function.  
Dimmer  
Auto Display  
Adjusts the lighting of the front panel display.  
Bright  
Dark  
Off  
Bright lighting.  
Low lighting.  
On  
Automatically displays  
information on the screen  
when changing the viewing  
titles, picture modes, audio  
signals, etc.  
Turns off the lighting during  
playback. Low lighting other  
than during playback.  
Off  
Displays information only  
when you press DISPLAY.  
Control for HDMI  
Screen Saver  
On  
Allows you to use the  
The screen saver image appears when you do  
not use the player for more than 15 minutes  
while an on-screen display, such as the home  
menu, is displayed on your TV screen. The  
screen saver image helps prevent your  
display device from becoming damaged  
(ghosting).  
“Control for HDMI”  
function (page 16).  
Off  
Turns off the function.  
Quick Start Mode  
On  
Turns on the screen saver  
function.  
On  
Off  
Shortens the startup time  
when turning on the player.  
Off  
Turns off the function.  
The default setting.  
b
When “Quick Start Mode” is set to “On,”  
– power consumption will be higher than when  
“Quick Start Mode” is set to “Off” and  
– the ventilation fan may turn on depending on the  
surrounding temperature.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Software Update Notification  
Network Settings  
Informs you of newer software version  
information. Network connections and  
settings are required when using this function  
Internet Settings  
These items are necessary when you connect  
to the Internet via a LAN cable. Enter the  
respective (alphanumeric) values for your  
broadband router or Wireless LAN router.  
The items that need to be set may differ,  
depending on the Internet service provider or  
the router. For details, refer to the instruction  
manuals that have been provided by your  
Internet service provider or supplied with the  
router.  
On  
Sets the player to inform you  
of newer software version  
information (page 40).  
Off  
Turns off the function.  
System Information  
Displays the player’s software version  
information and the MAC address.  
1 Select “Internet Settings” in “Network  
Settings,” and press ENTER.  
2 Select “IP Address Acquisition,” and  
press ENTER.  
3 Select an item, and press ENTER.  
Auto  
Acquisition  
Select this when DHCP  
(Dynamic Host  
Configuration Protocol)  
server settings are  
available from your  
Internet service  
provider. The network  
settings necessary for  
the player will be  
assigned automatically.  
Manual  
Set the IP address  
manually according to  
your network  
environment.  
• When you select “Auto Acquisition”  
If you set “DNS Server Auto  
Acquisition” to “Off,” set the following  
item:  
– DNS Server (Primary)/DNS Server  
(Secondary)  
• When you select “Manual”  
Set the following items:  
– IP Address  
– Subnet Mask  
– Default Gateway  
– DNS Server (Primary)/DNS Server  
(Secondary)  
,continued  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
b
3
Press the yellow button (“Finish”) to  
finish.  
When you set the “DNS Server (Primary)”/  
“DNS Server (Secondary)” addresses  
manually, enter the “DNS Server (Primary)”  
address. Otherwise, the “Internet Settings”  
will be set incorrectly.  
Available buttons  
Buttons  
Details  
Red button  
(Letter Type)  
Switches the keyboard  
between alphabet and  
numbers.  
4 If your ISP has a specific proxy server  
setting, select “Proxy Settings” using  
M/m, and press ENTER.  
Green button  
(A/a)  
Switches the keyboard  
between upper case and  
lower case.  
The “Proxy Settings” display appears.  
If the proxy server does not have a  
specific setting, go to step 8.  
Blue button  
(Symbol)  
Displays the keyboard for  
symbols.  
5 Set “Use of Proxy Server” to “On.”  
Yellow button  
(Finish)  
The input is entered, and  
the player returns to the  
previous display.  
6 Select “Proxy Server” and “Port,” and  
enter the settings.  
To enter the proxy server, see “To enter  
RETURN  
(Cancel)  
Returns to the previous  
display, canceling the  
input.  
7 Press RETURN.  
</M/m/,,  
ENTER  
• Select an input function  
using </M/m/,, and  
press ENTER.  
• Enter characters as  
follows: 1Select a  
character selection panel  
using </M/m/,, and  
press ENTER. 2Selecta  
character using </,,  
and press ENTER.  
8 Select “Network Diagnostic” using M/  
m, and press ENTER.  
9 Select “Start,” and press ENTER.  
10 Check that the message “Network  
connections are correct.” appears.  
The setup is finished. If the message does  
not appear, follow the on-screen  
messages.  
To enter characters  
The display for entering characters appears  
when you select “Proxy Server” in “Proxy  
Settings.”  
1
2
Press a number button repeatedly to  
select a character.  
Example:  
Press the number 3 button once to enter  
“D.”  
Press the number 3 button three times to  
enter “F.”  
Press ,, and enter the next character.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Easy Setup  
Resetting  
Re-runs the Easy Setup to make the basic  
settings.  
You can reset the player settings to the  
factory default by selecting the group of  
settings. All the settings within the group will  
be reset.  
1 Select “Easy Setup,” and press  
ENTER.  
1 Select “Resetting,” and press ENTER.  
2 Select “Start” using </,, and  
2 Select “Reset to Factory Default  
press ENTER.  
Settings,” and press ENTER.  
3 Follow the instructions for “Step 7:  
3 Select the settings you want to reset to  
default, and press ENTER.  
The display asks for confirmation.  
You can reset the following settings:  
– Video Settings  
– Audio Settings  
– BD/DVD Viewing Settings  
– Photo Settings  
– System Settings  
– Network Settings  
– All Settings  
4 Select “Start” using </,, and  
press ENTER.  
b
When “All Settings” is selected in step 3,  
– all settings within  
(Setup) are reset.  
– “Video Settings” and “Audio Settings” that can  
be adjusted by pressing OPTIONS during  
playback (page 34) are not reset.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Troubleshooting  
If you experience any of the following  
difficulties while using the player, use this  
troubleshooting guide to help remedy the  
problem before requesting repairs. Should  
any problem persist, consult your nearest  
Sony dealer.  
Power  
The power does not turn on.  
, Check that the AC power cord is connected  
securely.  
, It takes a short while before the player turns  
on.  
The message “A new software version has  
been found on the network. Perform  
update under "Network Update."” appears  
on the screen when turning the player on.  
the player to a newer software version.  
Additional  
Information  
Disc  
The disc does not play.  
, The disc is dirty.  
, The disc is upside down. Insert the disc with  
the playback side facing down.  
, The disc is skewed.  
, You are attempting to play a disc with a  
format that cannot be played back by this  
player (page 60).  
, The region code on the BD or DVD does  
not match the player.  
, The player cannot play a recorded disc that  
is not correctly finalized (page 60).  
Picture  
(page 15) when connecting equipment using  
the HDMI cable.  
There is no picture/picture noise appears.  
, Check that all the connecting cables are  
securely connected.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
, Check whether the connecting cables are  
damaged.  
, Check the connection to your TV (page 14)  
and switch the input selector on your TV so  
that the signal from the player appears on  
the TV screen.  
Sound  
(page 20) when connecting equipment using  
the HDMI cable.  
, When playing a double-layer BD/DVD, the  
video and audio may be momentarily  
interrupted at the point where the layers  
switch.  
There is no sound.  
, Check that all the connecting cables are  
securely connected.  
, Check whether the connecting cables are  
damaged.  
No picture appears when the video output  
resolution selected in “Output Video  
Format” is incorrect.  
, Press x on the player for more than 10  
seconds to reset the video output resolution  
to the lowest resolution.  
, Check the connection to your AV amplifier  
(receiver) (page 19) and switch the input  
selector on your AV amplifier (receiver) so  
that the audio signals of the player are  
output from your AV amplifier (receiver).  
, The player is in scan mode.  
, If the audio signal does not come through  
the DIGITAL OUT (OPTICAL/  
COAXIAL)/HDMI OUT jack, check the  
The picture does not fill the screen, even  
though the aspect ratio is set in “DVD  
Aspect Ratio” under “Video Settings.”  
, The aspect ratio of the disc is fixed on your  
The sound is not output correctly.  
, Check the “Audio Output Priority” setting  
in the “Audio Settings” setup (page 44).  
Video signals are not output from the  
jacks, other than from the HDMI OUT jack,  
when connecting the HDMI OUT jack and  
other video output jacks at the same time.  
, Set “Output Video Format” to “Component  
Video” in the “Video Settings” setup  
The sound volume is low.  
, The sound volume is low on some BDs or  
DVDs.  
, Try setting “Audio DRC” to “TV Mode” in  
the “Audio Settings” setup (page 46).  
, Set “Audio ATT” to “Off” in the “Audio  
Settings” setup (page 45).  
The dark area of the picture is too dark/the  
bright area is too bright or unnatural.  
, Set “Picture Quality Mode” to “Standard”  
The HD Audio (Dolby Digital Plus, Dolby  
TrueHD, DTS-HD High Resolution Audio,  
and DTS-HD Master Audio) is not output  
by bitstream.  
The picture is not output correctly.  
, Check the “Output Video Format” settings  
in the “Video Settings” setup (page 42).  
, Set “BD Audio Setting” to “Direct” in the  
“Audio Settings” setup (page 45).  
, Check that the connected AV amplifier  
(receiver) is compatible with each HD  
Audio format.  
No BD-ROM picture appears.  
, Check the “BD-ROM 1080/24p Output”  
setting in the “Video Settings” setup  
The interactive audio is not output.  
, Set “BD Audio Setting” to “Mix” in the  
“Audio Settings” setup (page 45).  
,continued  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
, Check that “Control for HDMI” is set to  
“On” (page 50).  
HDMI  
, Make sure that the connected component is  
compatible with the “Control for HDMI”  
function. For details, refer to the operating  
instructions supplied with the component.  
, Check the connected component’s setting  
for the “Control for HDMI” function. For  
details, refer to the operating instructions  
supplied with the component.  
There is no picture or no sound when  
connected to the HDMI OUT jack.  
, Try the following: 1Turn the player off  
and on again. 2Turn the connected  
equipment off and on again. 3Disconnect  
and then reconnect the HDMI cable.  
, If you change the HDMI connection, turn  
the player off and on again.  
, If power failure occurs, set “Control for  
HDMI” to “Off,” then set “Control for  
HDMI” to “On” (page 50).  
, For details on the “Control for HDMI”  
, If you connect the player to a TV through an  
AV amplifier (receiver) that is not  
There is no picture or picture noise  
appears when connected to the HDMI OUT  
jack.  
, The HDMI OUT jack is connected to a DVI  
device that does not support copyright  
protection technology.  
, If the HDMI OUT jack is used for video  
output, changing the video output  
resolution may solve the problem  
compatible with the “Control for HDMI”  
function, you may be unable to control the  
TV from the player.  
No sound is output from the HDMI OUT  
jack.  
, When you connect the player to a TV  
through an AV amplifier (receiver), if you  
change the HDMI connection, disconnect  
and reconnect the AC power cord, or a  
power failure occurs, try the following:  
1Switch the input selector of the AV  
amplifier (receiver) so that the picture from  
the player appears on the TV screen. 2Set  
“Control for HDMI” to “Off,” then set  
“Control for HDMI” to “On” (page 50).  
Refer to the operating instructions supplied  
with the AV amplifier (receiver).  
, The HDMI OUT jack is connected to a DVI  
device (DVI jacks do not accept audio  
signals).  
The sound is not output correctly when  
connected to the HDMI OUT jack.  
, The device connected to the HDMI OUT  
jack does not support the audio format of  
the player. Check the audio settings  
The display language on the screen  
switches automatically when connected to  
the HDMI OUT jack.  
, When “Control for HDMI” is set to “On”  
(page 50), the display language on the  
screen automatically switches according to  
the language setting of the connected TV (if  
you change the setting on your TV, etc.).  
External memory (local  
storage)  
The external memory is not recognized.  
, Try the following: 1Turn the player off.  
2Align the V mark of the EXT slot with  
the V mark on the external memory, and  
insert the external memory (page 23).  
3Turn the player on. 4Check that the  
EXT indicator lights up in the front panel  
display.  
The “Control for HDMI” function does not  
work (BRAVIA Sync).  
, Check that the AC power cord of the  
connected component is securely  
connected.  
, If the HDMI indicator does not appear in  
the front panel display, check the HDMI  
connection (page 15, 20).  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Bonus contents or other data that are  
contained in a BD-ROM cannot be played.  
, Try the following: 1Remove the disc.  
2Turn the player off. 3Remove and re-  
insert the external memory (page 23).  
4Turn the player on. 5Check that the  
EXT indicator lights up in the front panel  
display. 6Insert the BD-ROM with  
BONUSVIEW/BD-LIVE.  
The language for the soundtrack/subtitle  
or angles cannot be changed.  
, Try using the BD’s or DVD’s menu instead  
of the direct selection button on the remote  
, Multi-lingual tracks/subtitles or multi-  
angles are not recorded on the BD or DVD  
being played.  
, The BD or DVD prohibits the changing of  
the language for the soundtrack/subtitle or  
angles.  
A message indicating that the local  
storage does not have enough space  
appears on the screen.  
, Delete unnecessary data in the external  
The disc tray does not open and  
“LOCKED” or “TLK ON” appears in the  
front panel display.  
, When “LOCKED” appears, the player is  
locked. To cancel the Child Lock, hold  
down N on the player until “UNLOCK”  
appears in the front panel display (page 10).  
, When “TLK ON” appears, contact your  
Sony dealer or local authorized Sony  
service facility.  
Operation  
The remote does not function.  
, The batteries in the remote are weak  
, The distance between the remote and the  
player is too far.  
, The remote is not pointed at the remote  
sensor on the player.  
The disc tray does not open and you  
cannot remove the disc even after you  
press Z.  
, Try the following: 1Turn the player off,  
and disconnect the AC power cord.  
2Reconnect the AC power cord while  
pressing down Z on the player. 3Keep  
pressing down Z on the player until the tray  
opens. 4Remove the disc. 5When  
“WAIT” appears in the front panel display,  
hold down [/1 on the player for more than  
10 seconds until the player turns on again.  
The file name is not correctly displayed.  
, The player can only display ISO 8859-1-  
compliant character formats. Other  
character formats may be displayed  
differently.  
, Depending on the writing software used,  
the input characters may be displayed  
differently.  
The disc does not start playing from the  
beginning.  
, Resume Play is on (page 31).  
The player does not respond to any button.  
, Moisture has condensed inside the player  
, Hold down [/1 on the player for more than  
10 seconds until the indicators in the front  
panel display turn off.  
Some functions such as Stop or Search  
cannot be performed.  
, Depending on the disc, you may not be able  
to do some of the operations above. Refer to  
the operating manual supplied with the disc.  
If the player still does not respond to any  
button, disconnect then reconnect the AC  
power cord.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Self-Diagnosis Function  
When the self-diagnosis function is activated  
to prevent the player from malfunctioning, an  
error code appears in the front panel display,  
or just  
appears without any messages on  
the entire screen.  
In these cases, check the following.  
When an error code appears in the front  
panel display  
Error code Corrective action  
Exxxx  
SYS ERR  
Contact your nearest Sony  
dealer or local authorized Sony  
service facility and give the  
error code.  
FAN ERR  
• Check that the ventilation  
holes on the rear of the player  
are not blocked.  
• Place the player in a location  
with adequate ventilation to  
prevent heat build-up in the  
player.  
When just  
appears without any  
messages on the entire screen  
Contact your nearest Sony dealer or local  
authorized Sony service facility.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Playable Discs  
Icon used in  
this manual  
Type  
Disc Logo  
Characteristics  
BD-ROMs and BD-REs/BD-Rs in  
BDMV and BDAV mode, including  
8 cm discs (single layer) and DL discs  
BD  
Blu-ray Disc  
BD-REs/BD-Rs containing MP3 audio  
tracks* or JPEG image files  
DATA BD  
DVD  
Discs such as movies that can be  
purchased or rented  
DVD VIDEO  
DVD+RWs/DVD+Rs in +VR mode or  
DVD-RWs/DVD-Rs in video and VR  
mode, including 8 cm discs (single  
layer) and DVD+R DL/DVD-R DL  
discs  
DVD  
DVD  
DVD-ROMs and DVD+RWs/DVD+Rs/  
DVD-RWs/DVD-Rs containing MP3  
audio tracks* or JPEG image files  
DATA DVD  
DATA DVD  
Music CDs or CD-Rs/CD-RWs in music  
CD format  
CD  
CD  
CD-ROMs and CD-Rs/CD-RWs  
containing MP3 audio tracks* or JPEG  
image files  
DATA CD  
DATA CD  
* MP3 (MPEG-1 Audio Layer 3) is a standard  
format defined by ISO (International  
Organization for Standardization)/IEC  
(International Electrotechnical Commission)  
MPEG which compresses audio data.  
MPEG Layer-3 audio coding technology and  
patents licensed from Fraunhofer IIS and  
Thomson.  
Notes about BD-ROM compatibility  
Since the Blu-ray Disc specifications are new  
and evolving, some discs may not be playable  
depending on the disc type and the version.  
The audio output differs depending on the  
source, connected output jack, and selected  
audio settings. For details, see page 63.  
,continued  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
b
Discs that cannot be played  
• BDs with cartridge  
Notes about BD-REs/BD-Rs, DVD+RWs/  
DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/  
CD-RWs  
Some BD-REs/BD-Rs, DVD+RWs/DVD+Rs,  
DVD-RWs/DVD-Rs, or CD-Rs/CD-RWs cannot  
be played on this player due to the recording  
quality or physical condition of the disc, or the  
characteristics of the recording device and  
authoring software.  
A CD or DVD disc will not play if it has not been  
correctly finalized. For more information, refer to  
the operating instructions supplied with the  
recording device. Note that some playback  
functions may not work with some DVD+RWs/  
DVD+Rs, even if they have been correctly  
finalized. In this case, view the disc using normal  
playback.  
• DVD-RAMs  
• HD DVDs  
• DVD Audio discs  
• PHOTO CDs  
• Data part of CD-Extras  
• VCDs/Super VCDs  
• HD layer on Super Audio CDs  
• Audio material side on DualDiscs  
• BD-ROMs/DVD VIDEOs with a different  
region code (page 60).  
• A disc recorded in a color system other than  
NTSC, such as PAL (this player conforms  
to the NTSC color system).  
Note on playback operations of BDs/DVDs  
Some playback operations of BDs/DVDs  
may be intentionally set by software  
producers. Since this player plays BDs/  
DVDs according to the disc contents the  
software producers designed, some playback  
features may not be available. Refer to the  
instructions supplied with the BDs/DVDs.  
Music discs encoded with copyright  
protection technologies  
This product is designed to play back discs that  
conform to the Compact Disc (CD) standard.  
Various music discs encoded with copyright  
protection technologies are being marketed by  
some record companies. Please be aware that  
among those discs, there are some that do not  
conform to the CD standard and may not be  
playable by this product.  
Region code (BD-ROM/DVD VIDEO only)  
Your player has a region code printed on the  
rear of the unit and will only play BD-ROMs/  
DVD VIDEOs (playback only) labeled with  
identical region codes. This system is used to  
protect copyrights.  
Note on DualDiscs  
A DualDisc is a two sided disc product which  
mates DVD recorded material on one side with  
digital audio material on the other side.  
However, since the audio material side does not  
conform to the Compact Disc (CD) standard,  
playback on this product is not guaranteed.  
Note about double-layer BDs/DVDs  
The playback pictures and sound may be  
momentarily interrupted when the layers switch.  
Note about 8 cm BD-REs/8 cm BD-Rs  
Some 8 cm BD-REs/8 cm BD-Rs cannot be  
played on this player.  
DVD VIDEOs labeled  
this player.  
will also play on  
ALL  
Depending on the BD-ROM/DVD VIDEO,  
no region code may be indicated even though  
playing the BD-ROM/DVD VIDEO is  
prohibited by area restrictions.  
Note about BD-REs/BD-Rs  
This player supports Ver. 2.1 BD-RE and  
Ver. 1.1, 1.2 and 1.3 BD-R including organic  
pigment type BD-R (LTH type).  
Region code  
Note about DTS 5.1 MUSIC DISCs  
This player can play DTS 5.1 MUSIC DISCs.  
Audio signals are output in the formats specified  
Settings” table on page 63.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
About playback of discs recorded in  
AVCHD format  
This player can play AVCHD format discs.  
TM  
What is the AVCHD format?  
The AVCHD format is a high-definition digital  
video camera format used to record SD (standard  
definition) or HD (high definition) signals of either  
*1  
the 1080i specification or the 720p  
*2  
specification on DVDs, using efficient data  
compression coding technology. The MPEG-4  
AVC/H.264 format is adopted to compress video  
data, and the Dolby Digital or Linear PCM system  
is used to compress audio data. The MPEG-4 AVC/  
H.264 format is capable of compressing images at  
higher efficiency than that of the conventional  
image compressing format. The MPEG-4 AVC/  
H.264 format enables a high definition (HD) video  
signal shot on a digital video camera recorder to be  
recorded on DVD discs, in the same way as it would  
be for a standard definition (SD) television signal.  
*1  
A high-definition specification which utilizes  
1080 effective scanning lines and the interlace  
system.  
A high-definition specification which utilizes  
*2  
720 effective scanning lines and the progressive  
system.  
b
• Some AVCHD format discs may not play,  
depending on the recording condition.  
• The AVCHD format disc will not play if it has not  
been correctly finalized.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Video Output Resolution  
Output resolution differs depending on the “Output Video Format” setting in the “Video  
Settings” setup (page 42).  
When “Output Video Format” is set to  
“HDMI”  
When “Output Video Format” is set to  
“Component Video”  
Resolution  
setting  
LINE OUT COMPONENT HDMI OUT  
LINE OUT COMPONENT HDMI OUT  
VIDEO jack VIDEO jacks  
jack  
VIDEO jack VIDEO jacks  
jack  
480i  
480i  
480i  
480i  
480i  
480i  
480i  
480i  
480i  
480i  
480i  
480p  
480i  
480p  
720p  
1080i  
1080p  
480p  
720p  
1080i  
1080p  
480p  
480i  
480i  
720p*  
1080i*  
720p*  
1080i*  
480i  
480i  
no picture  
no picture  
unselectable unselectable unselectable  
* Protected contents on DVDs are output at 480p  
resolution.  
When “Output Video Format” is set to  
“Video”  
480i video signals are output from the LINE  
OUT VIDEO or COMPONENT VIDEO  
jack, and 480p video signals are output from  
the HDMI OUT jack.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Audio Output Signals and Player Settings  
The audio output signals differ, depending on the source, output jack, and the AV amplifier  
(receiver) you use. To enjoy the sound you want, check the support audio format of the AV  
amplifier (receiver), the connection to the AV amplifier (receiver), and the “Audio Settings”  
setup pattern according to the tables below.  
To enjoy  
Connections and settings  
“Audio  
Settings”  
setup pattern  
Audio output  
signal  
AV amplifier (receiver) Player audio  
support audio format jack*1  
Disc/source  
HD Audio*3  
HD Audio*2  
Up to LPCM 7.1ch*3 Multi-channel LPCM  
Dolby Digital/DTS Dolby Digital/DTS  
Dolby Digital/DTS*4 Dolby Digital/DTS  
HDMI OUT  
A
HD Audio*2  
DIGITAL OUT  
HDMI OUT  
C
A
C
A
BD  
Dolby Digital/DTS  
Dolby Digital/DTS  
Dolby Digital  
DTS  
/
/
DIGITAL OUT  
HDMI OUT  
Up to LPCM 7.1ch  
Multi-channel LPCM  
Multi-channel LPCM  
2-channel LPCM  
LPCM 7.1ch/  
LPCM 5.1ch  
HDMI OUT  
B
LPCM 7.1ch/  
LPCM 5.1ch  
LPCM 2ch  
DIGITAL OUT  
HDMI OUT  
C
B
C
Dolby Digital  
DTS  
DVD  
Dolby Digital/DTS  
Dolby Digital/DTS  
DIGITAL OUT  
“Audio Settings” setup table  
Audio Output  
BD Audio  
Setting  
Setup  
Audio (HDMI)*6  
Dolby Digital*6  
Priority*5  
DTS*6 (page 45)  
pattern  
A Direct  
AB  
C
HDMI  
Coaxial/Optical  
Auto  
B Mix or Direct  
*6  
DTS  
Dolby Digital  
*1  
*2  
When connecting to the LINE OUT (R-AUDIO-  
L) jacks, 2-channel signals are output.  
HD Audio includes Dolby TrueHD, Dolby  
Digital Plus, DTS-HD Master Audio, and DTS-  
HD High Resolution Audio formats.  
LPCM 2-channel signals are output in the  
following cases:  
– when “Audio (HDMI)” is set to “2ch PCM” in  
the “Audio Settings” setup.  
– when “Dolby Digital”/“DTS” is set to  
“Downmix PCM” in the “Audio Settings”  
setup.  
*3  
For Dolby TrueHD and DTS-HD Master Audio,  
set “HDMI Resolution” of “Output Video  
Format” to other than “480i” or “480p” in the  
“Video Settings” setup (page 42).  
*4  
*5  
The 2-channel or less-channel primary/  
secondary audio signals are output as LPCM 2-  
channel signals.  
LPCM 2-channel signals are output from output  
jacks other than priority jacks.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Specifications  
System  
Laser: Semiconductor laser  
Inputs and outputs  
(Jack name:  
Jack type/Output level/Load impedance)  
LINE OUT R-AUDIO-L:  
Phono jack/2 Vrms/10 kilohms  
DIGITAL OUT (OPTICAL):  
Optical output jack/–18 dBm  
(wave length 660 nm)  
DIGITAL OUT (COAXIAL):  
Phono jack/0.5 Vp-p/75 ohms  
HDMI OUT:  
HDMI 19-pin standard connector  
COMPONENT VIDEO OUT (Y, PB, PR):  
Phono jack/Y: 1.0 Vp-p/  
PB, PR: 0.7 Vp-p/75 ohms  
LINE OUT VIDEO:  
Phono jack/1.0 Vp-p/75 ohms  
LAN (100):  
100BASE-TX Terminal  
EXT:  
External memory slot (For connecting the  
external memory)  
DC output: 5 V 500 mA Max  
General  
Power requirements:  
U.S. and Canada models:  
120 V AC, 60 Hz  
Models for other areas:  
110-240 V AC, 50/60 Hz  
See page 3 for further information.  
Power consumption:  
22 W  
Dimensions (approx.):  
430 mm × 216 mm × 56 mm  
5
1
(17 in. × 8 / in. × 2 / in.)  
8
4
(width/depth/height) incl. projecting parts  
Mass (approx.):  
1
2.1 kg (4 lb 10 / oz)  
8
Operating temperature:  
5 ºC to 35 ºC (41 °F to 95 °F)  
Operating humidity:  
25 % to 80 %  
Supplied accessories  
Specifications and design are subject to  
change without notice.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Language Code List  
For details, see page 47.  
The language spellings conform to the ISO 639: 1988 (E/F) standard.  
Code Language  
Code Language  
Code Language  
Code Language  
not specified  
Parental Control/Area Code  
For details, see page 48.  
Number, Area (Code)  
2044, Argentina (ar)  
2047, Australia (au)  
2046, Austria (at)  
2057, Belgium (be)  
2070, Brazil (br)  
2200, Greece (gr)  
2219, Hong Kong (hk)  
2248, India (in)  
2379, Norway (no)  
2427, Pakistan (pk)  
2424, Philippines (ph)  
2428, Poland (pl)  
2238, Indonesia (id)  
2239, Ireland (ie)  
2436, Portugal (pt)  
2489, Russia (ru)  
2501, Singapore (sg)  
2149, Spain (es)  
2499, Sweden (se)  
2086, Switzerland (ch)  
2543, Taiwan (tw)  
2528, Thailand (th)  
2184, United Kingdom (gb)  
2079, Canada (ca)  
2090, Chile (cl)  
2254, Italy (it)  
2276, Japan (jp)  
2092, China (cn)  
2093, Colombia (co)  
2115, Denmark (dk)  
2165, Finland (fi)  
2174, France (fr)  
2109, Germany (de)  
2304, Korea (kr)  
2333, Luxembourg (lu)  
2363, Malaysia (my)  
2362, Mexico (mx)  
2376, Netherlands (nl)  
2390, New Zealand (nz)  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
3. User Account & Privacy  
As part of your usage of the Product, Service, Site, and/or  
Software, Sony may require that you establish a user account  
(“Account”) for which you must provide Sony true, accurate,  
current, and complete information about yourself and maintain/  
promptly update such information. You are responsible for  
maintaining the confidentiality of any and all of your passwords  
associated with the Account. You agree to notify Sony  
immediately of any unauthorized use of your password or any  
other breach of security related to the Service, Site, and/or  
Software.  
Terms and Conditions of  
Use and End User  
License Agreement  
The Sony Blu-ray Disc player (“Product”) and associated  
software (“Software”) are provided and maintained by Sony  
Electronics Inc. and its affiliates (“Sony”). Sony also provides  
and maintains associated service (the “Service”), including any  
subsite accessible through the Service’s Internet homepage (the  
“Site”). The Software includes software embedded in the  
Product; stored on any media, bundled with the Product or  
otherwise provided by Sony; downloaded from the Site or  
otherwise made accessible or provided by Sony; any such media  
and any printed or “on-line” or electronic documentation  
associated with the Product and all updates and upgrades thereto.  
Sony’s Privacy Policy is posted on the Site and at  
the terms of which are incorporated herein, and applies to your  
use of the Account, Product, Service, Site, and Software.  
4. Automatic Update  
The Software contains a functionality by which it is updated  
automatically when the Product is connected to a server  
belonging to Sony or to a third party designated by Sony. When  
you specify your intention not to use this automatic update  
functionality, or when the setting asking whether you wish to  
update automatically is activated and you decline to execute  
updates, it is assumed that you agree that the security  
functionality improvements, error corrections, other functional  
updates or any other changes offered by Sony through such  
updates would not be made to the Software and that your current  
and further use of the Software may be affected thereby.  
WHEN YOU ACCESS, BROWSE, OR USE THE SERVICE,  
PRODUCT, SOFTWARE, AND/OR SITE, YOU ACCEPT,  
WITHOUT LIMITATION OR QUALIFICATION, THE  
TERMS AND CONDITIONS SET FORTH HEREIN, SONY’S  
PRIVACY POLICY POSTED ON THE SITE, AND ANY  
ADDITIONAL TERMS AND CONDITIONS OF USE SET  
FORTH IN ANY PORTION OF THE SERVICE AND SITE  
(COLLECTIVELY THE “AGREEMENT”). IF YOU DO NOT  
AGREE WITH THE TERMS AND CONDITIONS OF THIS  
AGREEMENT, SONY DOES NOT GRANT THE LIMITED  
RIGHTS HEREIN, AND PLEASE DO NOT USE THE  
SERVICE, PRODUCT, SOFTWARE, AND/OR SITE.  
When the automatic update functionality described in the  
previous paragraph is activated, it is assumed that you agree (a)  
that the Software will be automatically updated as necessary to  
improve security functionality, to correct errors, to improve  
update functionality, or for other purposes, and (b) that this  
updating of the Software may be accompanied by the  
augmenting, modifying, or removing of functionality of the  
Software.  
1. Ownership  
The Software and all materials on the Service and/or Site,  
including but not limited to images, software and text (the  
“Content”) are protected by copyright under U.S. copyright law,  
international conventions, and other copyright laws. You cannot  
use the Software, Service, Product, Content, and Site except as  
specified herein. There may be proprietary logos, service marks,  
and trademarks found on this Service or Site. By making them  
available on the Service and/or Site, Sony is not granting you  
any license to utilize those proprietary logos, service marks, or  
trademarks. Any unauthorized use of the Service, Site, Content  
or Software may violate copyright laws, trademark laws, the  
laws of privacy and publicity, and civil and criminal statutes. All  
title and copyright in and to the Software or materials on the  
Service/Site and any copies of the Software, are owned by Sony,  
its licensors, or suppliers. All rights not specifically granted  
under this Agreement are reserved by Sony, its licensors, and  
suppliers.  
5. Additional Terms Governing Product Software  
You may use the Software solely in conjunction with the Product  
that accompanied the Software. The Software is licensed, not  
sold. In addition to the terms set forth in other portions of this  
Agreement, the Software is subject to the following:  
Use of Software. You may use the Software in conjunction with  
the Product for personal use.  
Limitation on Reverse Engineering, Decompilation and  
Disassembly. You may not modify, reverse engineer,  
decompile, or disassemble the Software in whole or in part.  
Separation of Components.The Software is licensed as a single  
product. Its component parts may not be separated for use on  
more than one device unless expressly authorized by Sony.  
Data Files. The Software may create data files automatically for  
use with the Software. Any such data files will be deemed as part  
of the Software.  
2. Your Rights & Limited License  
Rental. You may not rent or lease the Software.  
The Service, Site, Software, Content, and Product are only for  
your personal use. You are responsible for all your activities  
hereunder, including all legal liability incurred from your use of  
the Service or others who use the Service via your Product or  
Account (as defined below). You may use the Service, Site,  
Software, Content and Product for lawful purposes only. You  
may not distribute, exchange, modify, sell, or transmit anything  
you may copy from the Service or Site, including but not limited  
to any text, images, audio, and video, for any business,  
commercial, or public purpose. As long as you comply with the  
terms of this Agreement, Sony grants you a non-exclusive, non-  
transferable, limited right to enter, display, and use the Service,  
Site, and Software as set forth in this Agreement. You agree not  
to interrupt/disrupt or attempt to interrupt/disrupt the operation  
of this Service, Site or Software in any way.  
Software Transfer. You may permanently transfer all of your  
rights under this Agreement only as part of a sale or transfer of  
Software accompanying the sale or transfer of your Product,  
provided you retain no copies, transfer all of the Software  
(including all copies, component parts, the media and printed  
materials, all versions and any upgrades of the Software and this  
Agreement), and the recipient agrees to the terms of this  
Agreement.  
Dependent Software. The software, network services or other  
products other than Software upon which the Software’s  
performance depends on might be interrupted or discontinued at  
the discretion of the suppliers (software suppliers, service  
providers or Sony).  
High Risk Activities. The Software is not fault-tolerant and is  
not designed, manufactured or intended for use or resale as on-  
line control equipment in hazardous environments requiring fail-  
safe performance, such as in the operation of nuclear facilities,  
aircraft navigation or communication systems, air traffic control,  
direct life support machines, or weapons systems, in which the  
failure of the Software could lead to death, personal injury, or  
severe physical or environmental damage (“High Risk  
Activities”). Sony and its suppliers specifically disclaim any  
express or implied warranty of fitness for High Risk Activities.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
U.S. Government Restricted Rights. The Software is provided  
with RESTRICTED RIGHTS. Use, duplication, or disclosure by  
the United States Government is subject to restriction as set forth  
in subparagraph (c) (1) and (2) of the Commercial Computer  
Software-Restricted Rights at 48 CFR 52.227-19, as applicable.  
Manufacturer is Sony Electronics Inc., 16530 Via Esprillo, San  
Diego, CA 92127.  
GNU General Public, Lesser General Public, & Other Licenses.  
Notwithstanding terms in this Agreement, certain portions of the  
Software are governed by the GNU Lesser General Public  
License, Version 2.1 (LGPL), GNU General Public License  
Version 2 (GPL), and other open source code licenses (“Open  
Source Licenses”), copies of which are attached hereto and  
incorporated herein. For such portions of the Software, to the  
extent there is any conflict between this Agreement and the  
Open Source Licenses, the Open Source Licenses shall govern  
as applicable.  
9. Indemnification  
You agree to indemnify, defend, and hold Sony and all of its  
agents, directors, employees, information providers, licensors  
and licensees, affiliates, content providers, officers, and parent  
(collectively, “Indemnified Parties”), harmless from and against  
any and all liability and costs (including, without limitation,  
attorneys’ fees and costs), incurred by the Indemnified Parties in  
connection with any claim arising out of (i) any breach or alleged  
breach by you of this Agreement in any manner, (ii) any  
information you submit to Sony hereunder, (iii) any breach or  
alleged breach by you of a third party’s rights or (iv) any damage  
caused by or alleged to have been caused by you to the Service.  
You will cooperate as fully as reasonably required in  
Indemnified Party(s) defense of any claim. Sony and/or  
Indemnified Parties reserve the right, at its own expense, to  
assume the exclusive defense and control of any matter  
otherwise subject to indemnification by you and you shall not in  
any event settle any matter without the written consent of Sony  
and/or Indemnified Parties.  
Certain Source Code Availability. Sony is making available the  
source code of certain portions of the SOFTWARE per the GPL/  
LGPL LICENSES. Please see http://www.sony.com/linux  
for access to and instructions on obtaining such source code.  
10. DISCLAIMER OF WARRANTIES AND DAMAGES;  
LIMITATION OF LIABILITY  
6. Changes to Service  
YOU UNDERSTAND THAT USAGE OF THE PRODUCT  
AND SERVICE REQUIRES INTERNET SERVICE  
PROVIDED BY YOU, FOR WHICH YOU ARE SOLELY  
RESPONSIBLE. OPERATION OF THE PRODUCT AND/OR  
SERVICE MAY BE LIMITED OR RESTRICTED  
DEPENDING UPON THE CAPABILITIES OR TECHNICAL  
LIMITATIONS OF YOUR INTERNET SERVICE.  
Sony reserves the right to discontinue one, some, or all of the  
features of the Service you receive at any time at its discretion.  
Sony may, at its discretion and from time to time change, add or  
remove features and functionality, upgrade or modify the  
Service, Site and/or Software without notice. You may, at  
Sony’s discretion, receive messages regarding these changes and  
new features/functionality. Any new text, content, file, data,  
product, services, information, software, software tool or other  
feature provided by Sony (through the network or by CD-ROM  
or other means) (including, but not limited to, any update to  
Software provided to you automatically pursuant to Section 4 of  
this Agreement) will be subject to this Agreement; provided that,  
if separate terms and conditions applicable to such feature are  
provided to you, such terms and conditions shall apply to such  
feature in priority to this Agreement.  
YOUR USE OF THE SOFTWARE, SERVICE, PRODUCT,  
CONTENT AND/OR SITE IS AT YOUR OWN RISK. THE  
SOFTWARE, SERVICE, CONTENT AND SITE ARE  
PROVIDED “AS IS” AND, TO THE FULLEST EXTENT  
PERMISSIBLE BY LAW, SONY MAKES NO  
REPRESENTATIONS OR WARRANTIES OF ANY KIND  
WHATSOEVER (1) FOR THE ACCURACY,  
MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE, OR NON-INFRINGEMENT ASSOCIATED  
WITH THE SERVICE, SITE, AND/OR SOFTWARE; (2)  
THAT THE SERVER(S) THAT MAKES THE SERVICE,  
SOFTWARE, AND/OR SITE AVAILABLE ARE FREE OF  
VIRUSES OR OTHER COMPONENTS THAT MAY  
INFECT, HARM, OR CAUSE DAMAGE TO YOUR  
COMPUTER, TELEVISION, OTHER EQUIPMENT, OR  
ANY OTHER PROPERTY. FURTHERMORE, SONY DOES  
NOT WARRANT OR MAKE ANY REPRESENTATIONS  
REGARDING THE USE OR THE RESULTS OF THE USE OF  
THE SOFTWARE, SERVICE, AND/OR SITE IN TERMS OF  
ITS CORRECTNESS, ACCURACY, RELIABILITY, OR  
OTHERWISE. NO ORAL OR WRITTEN INFORMATION  
OR ADVICE GIVEN BY SONY OR A SONY AUTHORIZED  
REPRESENTATIVE SHALL CREATE A WARRANTY OR  
IN ANY WAY INCREASE THE SCOPE OF THIS  
7. Confidentiality  
You shall maintain the confidentiality of any information with  
regard to the Product and Documentation that is provided under  
this Agreement and is not publicly known. You agree not to  
disclose such information to any third party without the prior  
written consent.  
8. Sony’s Right to Terminate or Modify Terms or  
Conditions of this Agreement  
Sony may add to, change, or remove any part, term, or condition  
of this Agreement at any time, without prior notice. Any changes  
to this Agreement or any terms posted on the Service and/or Site  
apply as soon as they are posted. By continuing to use the  
Service, Product, Software and/or Site after any changes are  
posted, you are indicating your acceptance of those changes.  
SONY MAY ADD, CHANGE, DISCONTINUE, REMOVE,  
OR SUSPEND ANY OTHER CONTENT POSTED ON THE  
SERVICE AND/OR SITE, INCLUDING FEATURES AND  
SPECIFICATIONS OF PRODUCTS DESCRIBED OR  
DEPICTED ON THE SERVICE AND/OR SITE,  
WARRANTY. SHOULD THE SOFTWARE, SERVICE, AND/  
OR SITE PROVE DEFECTIVE YOU (AND NOT SONY OR  
A SONY AUTHORIZED REPRESENTATIVE) ASSUME  
THE ENTIRE COST OF ALL NECESSARY SERVICING,  
REPAIR OR CORRECTION.  
TEMPORARILY OR PERMANENTLY, AT ANY TIME,  
WITHOUT NOTICE AND WITHOUT LIABILITY.  
WITHOUT PREJUDICE TO ANY OTHER RIGHTS, SONY  
MAY SUSPEND OR TERMINATE THIS AGREEMENT  
IMMEDIATELY UPON NOTICE IF YOU FAIL TO  
COMPLY WITH THE TERMS AND CONDITIONS OF THIS  
AGREEMENT. Upon termination, you shall destroy the  
Software within fourteen (14) days after the date of such  
termination, and upon Sony’s request, provide Sony with the  
certification of such destruction. Sony may take any legal and  
technical remedies to prevent the violation of and/or to enforce  
this Agreement, including without limitation, immediate  
termination of your access to the Service if we believe in our  
discretion you are violating this Agreement.  
UNDER NO CIRCUMSTANCES, INCLUDING BUT NOT  
LIMITED TO SONY’S NEGLIGENCE OR ISSUES  
RELATED TO THIRD PARTY CONTENT PROVIDERS,  
SHALL SONY BE LIABLE FOR ANY CONSEQUENTIAL,  
DIRECT, INCIDENTAL, INDIRECT, PUNITIVE, OR  
SPECIAL DAMAGES RELATED TO (A) THE USE OF, (B)  
THE INABILITY TO USE, OR (C) ERRORS OR OMISSIONS  
IN THE SOFTWARE, SERVICE, PRODUCT, AND/OR SITE,  
EVEN IF SONY OR AN AUTHORIZED REPRESENTATIVE  
THEREOF HAS BEEN ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES. SOME STATES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF CONSEQUENTIAL OR  
INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION  
OR EXCLUSION MAY NOT APPLY TO YOU. IN NO  
EVENT SHALL SONY’S TOTAL LIABILITY TO YOU FOR  
ALL DAMAGES, LOSSES, AND CAUSES OF ACTION  
(WHETHER IN CONTRACT OR TORT, INCLUDING, BUT  
NOT LIMITED TO, NEGLIGENCE OR OTHERWISE)  
EXCEED $100.00.  
,continued  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. General Provisions  
Preamble  
This Agreement, the limited warranty accompanying the  
Product, plus any additional terms posted on the Service or Site,  
together constitute the entire agreement between Sony and you  
with respect to your use of the Product, Service, Site, Content,  
and Software. Any notice by Sony hereunder may be made by  
letter, email, or posting on the Service or Site. Any cause of  
action you may have with respect to your use of this Site must be  
commenced within one (1) year after the claim or cause of action  
arises. If for any reason a court of competent jurisdiction finds  
any provision of this Agreement, or portion thereof, to be  
unenforceable, that provision shall be enforced to the maximum  
extent permissible so as to affect the intent of this Agreement,  
and the remaining terms and conditions of the Agreement shall  
continue in full force and effect. This Agreement shall be  
governed by and construed in accordance with the laws of the  
State of Delaware, United States of America, without reference  
to its conflicts of law rules. You agree to submit to the personal  
and exclusive jurisdiction of federal or state courts in Delaware.  
The Licenses for most software are designed to take away your  
freedom to share and change it. By contrast, the GNU General  
Public License is intended to guarantee your freedom to share  
and change free software--to make sure the software is free for  
all its users. This General Public License applies to most of the  
Free Software Foundation’s software and to any other program  
whose authors commit to using it. (Some other Free Software  
Foundation software is covered by the GNU Lesser General  
Public License instead.) You can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not  
price. Our General Public Licenses are designed to make sure  
that you have the freedom to distribute copies of free software  
(and charge for this service if you wish), that you receive source  
code or can get it if you want it, that you can change the software  
or use pieces of it in new free programs; and that you know you  
can do these things.  
To protect your rights, we need to make restrictions that forbid  
anyone to deny you these rights or to ask you to surrender the  
rights. These restrictions translate to certain responsibilities for  
you if you distribute copies of the software, or if you modify it.  
For example, if you distribute copies of such a program, whether  
gratis or for a fee, you must give the recipients all the rights that  
you have. You must make sure that they, too, receive or can get  
the source code. And you must show them these terms so they  
know their rights.  
Software License  
Information  
We protect your rights with two steps: (1) copyright the  
software, and (2) offer you this license which gives you legal  
permission to copy, distribute and/or modify the software.  
Required public statement & License for  
GPL/LGPL licensed software used in  
this product  
This product contains software that is subject to the following  
GNU General Public License (“GPL”) or GNU Lesser General  
Public License (“LGPL”). These establish that customers have  
the right to acquire, modify, and redistribute the source code of  
said software in accordance with the terms of the GPL or the  
LGPL.  
Also, for each author’s protection and ours, we want to make  
certain that everyone understands that there is no warranty for  
this free software. If the software is modified by someone else  
and passed on, we want its recipients to know that what they  
have is not the original, so that any problems introduced by  
others will not reflect on the original authors’ reputations.  
Finally, any free program is threatened constantly by software  
patents. We wish to avoid the danger that redistributors of a free  
program will individually obtain patent licenses, in effect  
making the program proprietary. To prevent this, we have made  
it clear that any patent must be licensed for everyone’s free use  
or not licensed at all.  
Package List  
linux-kernel.tar.gz  
pump  
lrzsz  
busybox  
gcc  
The precise terms and conditions for copying, distribution and  
modification follow.  
glibc  
GNU GENERAL PUBLIC LICENSE TERMS AND  
CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
netbase  
dosfstools  
lzo  
0. This License applies to any program or other work which  
contains a notice placed by the copyright holder saying it  
may be distributed under the terms of this General Public  
License. The “Program”, below, refers to any such program  
or work, and a “work based on the Program” means either the  
Program or any derivative work under copyright law: that is  
to say, a work containing the Program or a portion of it, either  
verbatim or with modifications and/or translated into another  
language. (Hereinafter, translation is included without  
limitation in the term “modification”.) Each licensee is  
addressed as “you”.  
mkcramfs  
hostname  
scfs  
libptp  
libusb  
wireless-tools  
The source code for the above-listed software is available on the  
Web.  
To download, please access the following URL:  
Please note that Sony cannot answer or respond to any inquiries  
regarding the content of this source code.  
Activities other than copying, distribution and modification are  
not covered by this License; they are outside its scope. The act  
of running the Program is not restricted, and the output from the  
Program is covered only if its contents constitute a work based  
on the Program (independent of having been made by running  
the Program). Whether that is true depends on what the Program  
does.  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
1. You may copy and distribute verbatim copies of the  
Program’s source code as you receive it, in any medium,  
provided that you conspicuously and appropriately publish  
on each copy an appropriate copyright notice and disclaimer  
of warranty; keep intact all the notices that refer to this  
License and to the absence of any warranty; and give any  
other recipients of the Program a copy of this License along  
with the Program.  
Everyone is permitted to copy and distribute verbatim copies of  
this license document, but changing it is not allowed.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
You may charge a fee for the physical act of transferring a copy,  
and you may at your option offer warranty protection in  
exchange for a fee.  
The source code for a work means the preferred form of the work  
for making modifications to it. For an executable work, complete  
source code means all the source code for all modules it  
contains, plus any associated interface definition files, plus the  
scripts used to control compilation and installation of the  
executable. However, as a special exception, the source code  
distributed need not include anything that is normally distributed  
(in either source or binary form) with the major components  
(compiler, kernel, and so on) of the operating system on which  
the executable runs, unless that component itself accompanies  
the executable.  
2. You may modify your copy or copies of the Program or any  
portion of it, thus forming a work based on the Program, and  
copy and distribute such modifications or work under the  
terms of Section 1 above, provided that you also meet all of  
these conditions:  
a) You must cause the modified files to carry prominent  
notices stating that you changed the files and the date of  
any change.  
b) You must cause any work that you distribute or publish,  
that in whole or in part contains or is derived from the  
Program or any part thereof, to be licensed as a whole at  
no charge to all third parties under the terms of this  
License.  
If distribution of executable or object code is made by offering  
access to copy from a designated place, then offering equivalent  
access to copy the source code from the same place counts as  
distribution of the source code, even though third parties are not  
compelled to copy the source along with the object code.  
c) If the modified program normally reads commands  
interactively when run, you must cause it, when started  
running for such interactive use in the most ordinary way,  
to print or display an announcement including an  
appropriate copyright notice and a notice that there is no  
warranty (or else, saying that you provide a warranty) and  
that users may redistribute the program under these  
conditions, and telling the user how to view a copy of this  
License. (Exception: if the Program itself is interactive  
but does not normally print such an announcement, your  
work based on the Program is not required to print an  
announcement.)  
4. You may not copy, modify, sublicense, or distribute the  
Program except as expressly provided under this License.  
Any attempt otherwise to copy, modify, sublicense or  
distribute the Program is void, and will automatically  
terminate your rights under this License. However, parties  
who have received copies, or rights, from you under this  
License will not have their licenses terminated so long as  
such parties remain in full compliance.  
5. You are not required to accept this License, since you have  
not signed it. However, nothing else grants you permission to  
modify or distribute the Program or its derivative works.  
These actions are prohibited by law if you do not accept this  
License. Therefore, by modifying or distributing the  
Program (or any work based on the Program), you indicate  
your acceptance of this License to do so, and all its terms and  
conditions for copying, distributing or modifying the  
Program or works based on it.  
These requirements apply to the modified work as a whole. If  
identifiable sections of that work are not derived from the  
Program, and can be reasonably considered independent and  
separate works in themselves, then this License, and its terms, do  
not apply to those sections when you distribute them as separate  
works. But when you distribute the same sections as part of a  
whole which is a work based on the Program, the distribution of  
the whole must be on the terms of this License, whose  
6. Each time you redistribute the Program (or any work based  
on the Program), the recipient automatically receives a  
license from the original licensor to copy, distribute or  
modify the Program subject to these terms and conditions.  
You may not impose any further restrictions on the  
recipients’ exercise of the rights granted herein. You are not  
responsible for enforcing compliance by third parties to this  
License.  
permissions for other licensees extend to the entire whole, and  
thus to each and every part regardless of who wrote it.  
Thus, it is not the intent of this section to claim rights or contest  
your rights to work written entirely by you; rather, the intent is  
to exercise the right to control the distribution of derivative or  
collective works based on the Program.  
7. If, as a consequence of a court judgment or allegation of  
patent infringement or for any other reason (not limited to  
patent issues), conditions are imposed on you (whether by  
court order, agreement or otherwise) that contradict the  
conditions of this License, they do not excuse you from the  
conditions of this License. If you cannot distribute so as to  
satisfy simultaneously your obligations under this License  
and any other pertinent obligations, then as a consequence  
you may not distribute the Program at all. For example, if a  
patent license would not permit royalty-free redistribution of  
the Program by all those who receive copies directly or  
indirectly through you, then the only way you could satisfy  
both it and this License would be to refrain entirely from  
distribution of the Program.  
In addition, mere aggregation of another work not based on the  
Program with the Program (or with a work based on the  
Program) on a volume of a storage or distribution medium does  
not bring the other work under the scope of this License.  
3. You may copy and distribute the Program (or a work based  
on it, under Section 2) in object code or executable form  
under the terms of Sections 1 and 2 above provided that you  
also do one of the following:  
a) Accompany it with the complete corresponding machine-  
readable source code, which must be distributed under  
the terms of Sections 1 and 2 above on a medium  
customarily used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three  
years, to give any third party, for a charge no more than  
your cost of physically performing source distribution, a  
complete machine-readable copy of the corresponding  
source code, to be distributed under the terms of Sections  
1 and 2 above on a medium customarily used for software  
interchange; or,  
c) Accompany it with the information you received as to the  
offer to distribute corresponding source code. (This  
alternative is allowed only for noncommercial  
distribution and only if you received the program in  
object code or executable form with such an offer, in  
accord with Subsection b above.)  
If any portion of this section is held invalid or unenforceable  
under any particular circumstance, the balance of the section is  
intended to apply and the section as a whole is intended to apply  
in other circumstances.  
It is not the purpose of this section to induce you to infringe any  
patents or other property right claims or to contest validity of any  
such claims; this section has the sole purpose of protecting the  
integrity of the free software distribution system, which is  
implemented by public license practices. Many people have  
made generous contributions to the wide range of software  
distributed through that system in reliance on consistent  
application of that system; it is up to the author/donor to decide  
if he or she is willing to distribute software through any other  
system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is  
believed to be a consequence of the rest of this License.  
,continued  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. If the distribution and/or use of the Program is restricted in  
certain countries either by patents or by copyrighted  
interfaces, the original copyright holder who places the  
Program under this License may add an explicit geographical  
distribution limitation excluding those countries, so that  
distribution is permitted only in or among countries not thus  
excluded. In such case, this License incorporates the  
limitation as if written in the body of this License.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Programs  
If you develop a new program, and you want it to be of the  
greatest possible use to the public, the best way to achieve this is  
to make it free software which everyone can redistribute and  
change under these terms.  
To do so, attach the following notices to the program. It is safest  
to attach them to the start of each source file to most effectively  
convey the exclusion of warranty; and each file should have at  
least the “copyright” line and a pointer to where the full notice is  
found.  
9. The Free Software Foundation may publish revised and/or  
new versions of the General Public License from time to  
time. Such new versions will be similar in spirit to the present  
version, but may differ in detail to address new problems or  
concerns.  
<one line to give the program’s name and an idea of what it  
does.>  
Copyright (C) <year> <name of author>  
Each version is given a distinguishing version number. If the  
Program specifies a version number of this License which  
applies to it and “any later version”, you have the option of  
following the terms and conditions either of that version or of  
any later version published by the Free Software Foundation. If  
the Program does not specify a version number of this License,  
you may choose any version ever published by the Free Software  
Foundation.  
This program is free software; you can redistribute it and/or  
modify it under the terms of the GNU General Public License as  
published by the Free Software Foundation; either version 2 of  
the License, or (at your option) any later version.  
This program is distributed in the hope that it will be useful, but  
WITHOUT ANY WARRANTY; without even the implied  
warranty of MERCHANTABILITY or FITNESS FOR A  
PARTICULAR PURPOSE. See the GNU General Public  
License for more details.  
10. If you wish to incorporate parts of the Program into other free  
programs whose distribution conditions are different, write  
to the author to ask for permission. For software which is  
copyrighted by the Free Software Foundation, write to the  
Free Software Foundation; we sometimes make exceptions  
for this. Our decision will be guided by the two goals of  
preserving the free status of all derivatives of our free  
software and of promoting the sharing and reuse of software  
generally.  
You should have received a copy of the GNU General Public  
License along with this program; if not, write to the Free  
Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,  
MA 02111-1307, USA.  
Also add information on how to contact you by electronic and  
paper mail.  
NO WARRANTY  
If the program is interactive, make it output a short notice like  
this when it starts in an interactive mode:  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF  
CHARGE, THERE IS NO WARRANTY FOR THE  
PROGRAM, TO THE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE  
STATED IN WRITING THE COPYRIGHT HOLDERS  
AND/OR OTHER PARTIES PROVIDE THE PROGRAM  
“AS IS” WITHOUT WARRANTY OF ANY KIND,  
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO  
THE QUALITY AND PERFORMANCE OF THE  
PROGRAM IS WITH YOU. SHOULD THE PROGRAM  
PROVE DEFECTIVE, YOU ASSUME THE COST OF  
ALL NECESSARY SERVICING, REPAIR OR  
CORRECTION.  
Gnomovision version 69, Copyright (C) year name of author  
Gnomovision comes with ABSOLUTELY NO WARRANTY;  
for details type ‘show w’. This is free software, and you are  
welcome to redistribute it under certain conditions; type ‘show  
c’ for details.  
The hypothetical commands ‘show w’ and ‘show c’ should show  
the appropriate parts of the General Public License. Of course,  
the commands you use may be called something other than  
‘show w’ and ‘show c’; they could even be mouse-clicks or  
menu items--whatever suits your program.  
You should also get your employer (if you work as a  
programmer) or your school, if any, to sign a “copyright  
disclaimer” for the program, if necessary. Here is a sample; alter  
the names:  
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE  
LAW OR AGREED TO IN WRITING WILL ANY  
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO  
MAY MODIFY AND/OR REDISTRIBUTE THE  
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO  
YOU FOR DAMAGES, INCLUDING ANY GENERAL,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES ARISING OUT OF THE USE OR INABILITY  
TO USE THE PROGRAM (INCLUDING BUT NOT  
LIMITED TO LOSS OF DATA OR DATA BEING  
RENDERED INACCURATE OR LOSSES SUSTAINED  
BY YOU OR THIRD PARTIES OR A FAILURE OF THE  
PROGRAM TO OPERATE WITH ANY OTHER  
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER  
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES.  
Yoyodyne, Inc., hereby disclaims all copyright interest in the  
program ‘Gnomovision’ (which makes passes at compilers)  
written by James Hacker.  
<signature of Ty Coon>, 1 April 1989  
Ty Coon, President of Vice  
This General Public License does not permit incorporating your  
program into proprietary programs. If your program is a  
subroutine library, you may consider it more useful to permit  
linking proprietary applications with the library. If this is what  
you want to do, use the GNU Lesser General Public License  
instead of this License.  
GNU LESSER GENERAL PUBLIC  
LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of  
this license document, but changing it is not allowed.  
[This is the first released version of the Lesser GPL. It also  
counts as the successor of the GNU Library Public License,  
version 2, hence the version number 2.1.]  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For example, on rare occasions, there may be a special need to  
encourage the widest possible use of a certain library, so that it  
becomes a de-facto standard. To achieve this, non-free programs  
must be allowed to use the library. A more frequent case is that  
a free library does the same job as widely used non-free libraries.  
In this case, there is little to gain by limiting the free library to  
free software only, so we use the Lesser General Public License.  
Preamble  
The licenses for most software are designed to take away your  
freedom to share and change it. By contrast, the GNU General  
Public Licenses are intended to guarantee your freedom to share  
and change free software--to make sure the software is free for  
all its users.  
This license, the Lesser General Public License, applies to some  
specially designated software packages--typically libraries--of  
the Free Software Foundation and other authors who decide to  
use it. You can use it too, but we suggest you first think carefully  
about whether this license or the ordinary General Public  
License is the better strategy to use in any particular case, based  
on the explanations below.  
In other cases, permission to use a particular library in non-free  
programs enables a greater number of people to use a large body  
of free software. For example, permission to use the GNU C  
Library in non-free programs enables many more people to use  
the whole GNU operating system, as well as its variant, the  
GNU/Linux operating system.  
Although the Lesser General Public License is Less protective of  
the users’ freedom, it does ensure that the user of a program that  
is linked with the Library has the freedom and the wherewithal  
to run that program using a modified version of the Library.  
When we speak of free software, we are referring to freedom of  
use, not price. Our General Public Licenses are designed to make  
sure that you have the freedom to distribute copies of free  
software (and charge for this service if you wish); that you  
receive source code or can get it if you want it; that you can  
change the software and use pieces of it in new free programs;  
and that you are informed that you can do these things.  
The precise terms and conditions for copying, distribution and  
modification follow. Pay close attention to the difference  
between a “work based on the library” and a “work that uses the  
library”. The former contains code derived from the library,  
whereas the latter must be combined with the library in order to  
run.  
To protect your rights, we need to make restrictions that forbid  
distributors to deny you these rights or to ask you to surrender  
these rights. These restrictions translate to certain  
responsibilities for you if you distribute copies of the library or  
if you modify it.  
GNU GENERAL PUBLIC LICENSE TERMS AND  
CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
0. This License Agreement applies to any software library or  
other program which contains a notice placed by the  
copyright holder or other authorized party saying it may be  
distributed under the terms of this Lesser General Public  
License (also called “this License”). Each licensee is  
addressed as “you”.  
For example, if you distribute copies of the library, whether  
gratis or for a fee, you must give the recipients all the rights that  
we gave you. You must make sure that they, too, receive or can  
get the source code. If you link other code with the library, you  
must provide complete object files to the recipients, so that they  
can relink them with the library after making changes to the  
library and recompiling it. And you must show them these terms  
so they know their rights.  
A “library” means a collection of software functions and/or data  
prepared so as to be conveniently linked with application  
programs (which use some of those functions and data) to form  
executables.  
We protect your rights with a two-step method: (1) we copyright  
the library, and (2) we offer you this license, which gives you  
legal permission to copy, distribute and/or modify the library.  
To protect each distributor, we want to make it very clear that  
there is no warranty for the free library. Also, if the library is  
modified by someone else and passed on, the recipients should  
know that what they have is not the original version, so that the  
original author's reputation will not be affected by problems that  
might be introduced by others.  
The “Library”, below, refers to any such software library or  
work which has been distributed under these terms. A “work  
based on the Library” means either the Library or any derivative  
work under copyright law: that is to say, a work containing the  
Library or a portion of it, either verbatim or with modifications  
and/or translated straightforwardly into another language.  
(Hereinafter, translation is included without limitation in the  
term “modification”.)  
Finally, software patents pose a constant threat to the existence  
of any free program. We wish to make sure that a company  
cannot effectively restrict the users of a free program by  
obtaining a restrictive license from a patent holder. Therefore,  
we insist that any patent license obtained for a version of the  
library must be consistent with the full freedom of use specified  
in this license.  
“Source code” for a work means the preferred form of the work  
for making modifications to it. For a library, complete source  
code means all the source code for all modules it contains, plus  
any associated interface definition files, plus the scripts used to  
control compilation and installation of the library.  
Most GNU software, including some libraries, is covered by the  
ordinary GNU General Public License. This license, the GNU  
Lesser General Public License, applies to certain designated  
libraries, and is quite different from the ordinary General Public  
License. We use this license for certain libraries in order to  
permit linking those libraries into non-free programs.  
Activities other than copying, distribution and modification are  
not covered by this License; they are outside its scope. The act  
of running a program using the Library is not restricted, and  
output from such a program is covered only if its contents  
constitute a work based on the Library (independent of the use  
of the Library in a tool for writing it). Whether that is true  
depends on what the Library does and what the program that  
uses the Library does.  
When a program is linked with a library, whether statically or  
using a shared library, the combination of the two is legally  
speaking a combined work, a derivative of the original library.  
The ordinary General Public License therefore permits such  
linking only if the entire combination fits its criteria of freedom.  
The Lesser General Public License permits more lax criteria for  
linking other code with the library.  
1. You may copy and distribute verbatim copies of the  
Library’s complete source code as you receive it, in any  
medium, provided that you conspicuously and appropriately  
publish on each copy an appropriate copyright notice and  
disclaimer of warranty; keep intact all the notices that refer  
to this License and to the absence of any warranty; and  
distribute a copy of this License along with the Library.  
We call this license the “Lesser” General Public License because  
it does Less to protect the user’s freedom than the ordinary  
General Public License. It also provides other free software  
developers Less of an advantage over competing non-free  
programs. These disadvantages are the reason we use the  
ordinary General Public License for many libraries. However,  
the Lesser license provides advantages in certain special  
circumstances.  
You may charge a fee for the physical act of transferring a copy,  
and you may at your option offer warranty protection in  
exchange for a fee.  
2. You may modify your copy or copies of the Library or any  
portion of it, thus forming a work based on the Library, and  
copy and distribute such modifications or work under the  
terms of Section 1 above, provided that you also meet all of  
these conditions:  
,continued  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent  
notices stating that you changed the files and the date of  
any change.  
c) You must cause the whole of the work to be licensed at  
no charge to all third parties under the terms of this  
License.  
d) If a facility in the modified Library refers to a function or  
a table of data to be supplied by an application program  
that uses the facility, other than as an argument passed  
when the facility is invoked, then you must make a good  
faith effort to ensure that, in the event an application does  
not supply such function or table, the facility still  
operates, and performs whatever part of its purpose  
remains meaningful.  
(For example, a function in a library to compute square roots  
has a purpose that is entirely well-defined independent of the  
application. Therefore, Subsection 2d requires that any  
application-supplied function or table used by this function  
must be optional: if the application does not supply it, the  
square root function must still compute square roots.)  
However, linking a “work that uses the Library” with the Library  
creates an executable that is a derivative of the Library (because  
it contains portions of the Library), rather than a “work that uses  
the library”. The executable is therefore covered by this License.  
Section 6 states terms for distribution of such executables.  
When a “work that uses the Library” uses material from a header  
file that is part of the Library, the object code for the work may  
be a derivative work of the Library even though the source code  
is not. Whether this is true is especially significant if the work  
can be linked without the Library, or if the work is itself a  
library. The threshold for this to be true is not precisely defined  
by law.  
If such an object file uses only numerical parameters, data  
structure layouts and assessors, and small macros and small  
inline functions (ten lines or less in length), then the use of the  
object file is unrestricted, regardless of whether it is legally a  
derivative work. (Executables containing this object code plus  
portions of the Library will still fall under Section 6.)  
Otherwise, if the work is a derivative of the Library, you may  
distribute the object code for the work under the terms of Section  
6. Any executables containing that work also fall under Section  
6, whether or not they are linked directly with the Library itself.  
These requirements apply to the modified work as a whole.  
If identifiable sections of that work are not derived from the  
Library, and can be reasonably considered independent and  
separate works in themselves, then this License, and its  
terms, do not apply to those sections when you distribute  
them as separate works. But when you distribute the same  
sections as part of a whole which is a work based on the  
Library, the distribution of the whole must be on the terms of  
this License, whose permissions for other licensees extend to  
the entire whole, and thus to each and every part regardless  
of who wrote it.  
6. As an exception to the Sections above, you may also  
combine or link a “work that uses the Library” with the  
Library to produce a work containing portions of the Library,  
and distribute that work under terms of your choice, provided  
that the terms permit modification of the work for the  
customer’s own use and reverse engineering for debugging  
such modifications.  
You must give prominent notice with each copy of the work that  
the Library is used in it and that the Library and its use are  
covered by this License. You must supply a copy of this License.  
If the work during execution displays copyright notices, you  
must include the copyright notice for the Library among them,  
as well as a reference directing the user to the copy of this  
License. Also, you must do one of these things:  
Thus, it is not the intent of this section to claim rights or contest  
your rights to work written entirely by you; rather, the intent is  
to exercise the right to control the distribution of derivative or  
collective works based on the Library.  
In addition, mere aggregation of another work not based on the  
Library with the Library (or with a work based on the Library)  
on a volume of a storage or distribution medium does not bring  
the other work under the scope of this License.  
a) Accompany the work with the complete corresponding  
machine-readable source code for the Library including  
whatever changes were used in the work (which must be  
distributed under Sections 1 and 2 above); and, if the  
work is an executable linked with the Library, with the  
complete machine-readable “work that uses the Library”,  
as object code and/or source code, so that the user can  
modify the Library and then relink to produce a modified  
executable containing the modified Library. (It is  
understood that the user who changes the contents of  
definitions files in the Library will not necessarily be able  
to recompile the application to use the modified  
3. You may opt to apply the terms of the ordinary GNU General  
Public License instead of this License to a given copy of the  
Library. To do this, you must alter all the notices that refer to  
this License, so that they refer to the ordinary GNU General  
Public License, version 2, instead of to this License. (If a  
newer version than version 2 of the ordinary GNU General  
Public License has appeared, then you can specify that  
version instead if you wish.) Do not make any other change  
in these notices.  
definitions.)  
Once this change is made in a given copy, it is irreversible for  
that copy, so the ordinary GNU General Public License applies  
to all subsequent copies and derivative works made from that  
copy.  
b) Use a suitable shared library mechanism for linking with  
the Library. A suitable mechanism is one that (1) uses at  
run time a copy of the library already present on the user's  
computer system, rather than copying library functions  
into the executable, and (2) will operate properly with a  
modified version of the library, if the user installs one, as  
long as the modified version is interface-compatible with  
the version that the work was made with.  
c) Accompany the work with a written offer, valid for at  
least three years, to give the same user the materials  
specified in Subsection 6a, above, for a charge no more  
than the cost of performing this distribution.  
d) If distribution of the work is made by offering access to  
copy from a designated place, offer equivalent access to  
copy the above specified materials from the same place.  
e) Verify that the user has already received a copy of these  
materials or that you have already sent this user a copy.  
This option is useful when you wish to copy part of the code of  
the Library into a program that is not a library.  
4. You may copy and distribute the Library (or a portion or  
derivative of it, under Section 2) in object code or executable  
form under the terms of Sections 1 and 2 above provided that  
you accompany it with the complete corresponding machine-  
readable source code, which must be distributed under the  
terms of Sections 1 and 2 above on a medium customarily  
used for software interchange.  
If distribution of object code is made by offering access to copy  
from a designated place, then offering equivalent access to copy  
the source code from the same place satisfies the requirement to  
distribute the source code, even though third parties are not  
compelled to copy the source along with the object code.  
For an executable, the required form of the “work that uses the  
Library” must include any data and utility programs needed for  
reproducing the executable from it. However, as a special  
exception, the materials to be distributed need not include  
anything that is normally distributed (in either source or binary  
form) with the major components (compiler, kernel, and so on)  
of the operating system on which the executable runs, unless that  
component itself accompanies the executable.  
5. A program that contains no derivative of any portion of the  
Library, but is designed to work with the Library by being  
compiled or linked with it, is called a “work that uses the  
Library”. Such a work, in isolation, is not a derivative work  
of the Library, and therefore falls outside the scope of this  
License.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
It may happen that this requirement contradicts the license  
restrictions of other proprietary libraries that do not normally  
accompany the operating system. Such a contradiction means  
you cannot use both them and the Library together in an  
executable that you distribute.  
This section is intended to make thoroughly clear what is  
believed to be a consequence of the rest of this License.  
12. If the distribution and/or use of the Library is restricted in  
certain countries either by patents or by copyrighted  
interfaces, the original copyright holder who places the  
Library under this License may add an explicit geographical  
distribution limitation excluding those countries, so that  
distribution is permitted only in or among countries not thus  
excluded. In such case, this License incorporates the  
limitation as if written in the body of this License.  
7. You may place library facilities that are a work based on the  
Library side-by-side in a single library together with other  
library facilities not covered by this License, and distribute  
such a combined library, provided that the separate  
distribution of the work based on the Library and of the other  
library facilities is otherwise permitted, and provided that  
you do these two things:  
13. The Free Software Foundation may publish revised and/or  
new versions of the Lesser General Public License from time  
to time. Such new versions will be similar in spirit to the  
present version, but may differ in detail to address new  
problems or concerns.  
a) Accompany the combined library with a copy of the same  
work based on the Library, uncombined with any other  
library facilities. This must be distributed under the terms  
of the Sections above.  
b) Give prominent notice with the combined library of the  
fact that part of it is a work based on the Library, and  
explaining where to find the accompanying uncombined  
form of the same work.  
Each version is given a distinguishing version number. If the  
Library specifies a version number of this License which applies  
to it and “any later version”, you have the option of following the  
terms and conditions either of that version or of any later version  
published by the Free Software Foundation. If the Library does  
not specify a license version number, you may choose any  
version ever published by the Free Software Foundation.  
8. You may not copy, modify, sublicense, link with, or  
distribute the Library except as expressly provided under this  
License. Any attempt otherwise to copy, modify, sublicense,  
link with, or distribute the Library is void, and will  
automatically terminate your rights under this License.  
However, parties who have received copies, or rights, from  
you under this License will not have their licenses terminated  
so long as such parties remain in full compliance.  
14. If you wish to incorporate parts of the Library into other free  
programs whose distribution conditions are incompatible  
with these, write to the author to ask for permission. For  
software which is copyrighted by the Free Software  
Foundation, write to the Free Software Foundation; we  
sometimes make exceptions for this. Our decision will be  
guided by the two goals of preserving the free status of all  
derivatives of our free software and of promoting the sharing  
and reuse of software generally.  
9. You are not required to accept this License, since you have  
not signed it. However, nothing else grants you permission to  
modify or distribute the Library or its derivative works.  
These actions are prohibited by law if you do not accept this  
License. Therefore, by modifying or distributing the Library  
(or any work based on the Library), you indicate your  
acceptance of this License to do so, and all its terms and  
conditions for copying, distributing or modifying the Library  
or works based on it.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF  
CHARGE, THERE IS NO WARRANTY FOR THE  
LIBRARY, TO THE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE  
STATED IN WRITING THE COPYRIGHT HOLDERS  
AND/OR OTHER PARTIES PROVIDE THE LIBRARY  
“AS IS” WITHOUT WARRANTY OF ANY KIND,  
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO  
THE QUALITY AND PERFORMANCE OF THE  
LIBRARY IS WITH YOU. SHOULD THE LIBRARY  
PROVE DEFECTIVE, YOU ASSUME THE COST OF  
ALL NECESSARY SERVICING, REPAIR OR  
CORRECTION.  
10. Each time you redistribute the Library (or any work based on  
the Library), the recipient automatically receives a license  
from the original licensor to copy, distribute, link with or  
modify the Library subject to these terms and conditions.  
You may not impose any further restrictions on the  
recipients' exercise of the rights granted herein. You are not  
responsible for enforcing compliance by third parties with  
this License.  
11. If, as a consequence of a court judgment or allegation of  
patent infringement or for any other reason (not limited to  
patent issues), conditions are imposed on you (whether by  
court order, agreement or otherwise) that contradict the  
conditions of this License, they do not excuse you from the  
conditions of this License. If you cannot distribute so as to  
satisfy simultaneously your obligations under this License  
and any other pertinent obligations, then as a consequence  
you may not distribute the Library at all. For example, if a  
patent license would not permit royalty-free redistribution of  
the Library by all those who receive copies directly or  
indirectly through you, then the only way you could satisfy  
both it and this License would be to refrain entirely from  
distribution of the Library.  
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE  
LAW OR AGREED TO IN WRITING WILL ANY  
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO  
MAY MODIFY AND/OR REDISTRIBUTE THE  
LIBRARY AS PERMITTED ABOVE, BE LIABLE TO  
YOU FOR DAMAGES, INCLUDING ANY GENERAL,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES ARISING OUT OF THE USE OR INABILITY  
TO USE THE LIBRARY (INCLUDING BUT NOT  
LIMITED TO LOSS OF DATA OR DATA BEING  
RENDERED INACCURATE OR LOSSES SUSTAINED  
BY YOU OR THIRD PARTIES OR A FAILURE OF THE  
LIBRARY TO OPERATE WITH ANY OTHER  
SOFTWARE), EVEN IF SUCH HOLDER OR OTHER  
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGES.  
If any portion of this section is held invalid or unenforceable  
under any particular circumstance, the balance of the section is  
intended to apply, and the section as a whole is intended to apply  
in other circumstances.  
It is not the purpose of this section to induce you to infringe any  
patents or other property right claims or to contest validity of any  
such claims; this section has the sole purpose of protecting the  
integrity of the free software distribution system which is  
implemented by public license practices. Many people have  
made generous contributions to the wide range of software  
distributed through that system in reliance on consistent  
application of that system; it is up to the author/donor to decide  
if he or she is willing to distribute software through any other  
system and a licensee cannot impose that choice.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Libraries  
If you develop a new library, and you want it to be of the greatest  
possible use to the public, we recommend making it free  
software that everyone can redistribute and change. You can do  
so by permitting redistribution under these terms (or,  
alternatively, under the terms of the ordinary General Public  
License).  
,continued  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To apply these terms, attach the following notices to the library.  
It is safest to attach them to the start of each source file to most  
effectively convey the exclusion of warranty; and each file  
should have at least the “copyright” line and a pointer to where  
the full notice is found.  
6. Redistributions of any form whatsoever must retain the  
following acknowledgment:  
“This product includes software developed by the OpenSSL  
Project for use in the OpenSSL Toolkit (http://  
www.openssl.org/)”  
<one line to give the library's name and an idea of what it does.>  
Copyright (C) <year> <name of author>  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL  
PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE  
DISCLAIMED. IN NO EVENT SHALL THE OpenSSL  
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY  
DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES  
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT  
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,  
DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  
HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT  
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR  
OTHERWISE)  
This library is free software; you can redistribute it and/or  
modify it under the terms of the GNU Lesser General Public  
License as published by the Free Software Foundation; either  
version 2.1 of the License, or (at your option) any later version.  
This library is distributed in the hope that it will be useful, but  
WITHOUT ANY WARRANTY; without even the implied  
warranty of MERCHANTABILITY or FITNESS FOR A  
PARTICULAR PURPOSE. See the GNU Lesser General  
Public License for more details.  
You should have received a copy of the GNU Lesser General  
Public License along with this library; if not, write to the Free  
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,  
MA 02111-1307 USA  
ARISING IN ANY WAY OUT OF THE USE OF THIS  
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF  
SUCH DAMAGE.  
Also add information on how to contact you by electronic and  
paper mail.  
You should also get your employer (if you work as a  
programmer) or your school, if any, to sign a “copyright  
disclaimer” for the library, if necessary. Here is a sample; alter  
the names:  
This product includes cryptographic software written by Eric  
Young ([email protected]). This product includes software  
written by Tim Hudson ([email protected]).  
Yoyodyne, Inc., hereby disclaims all copyright interest in the  
library ‘Frob’ (a library for tweaking knobs) written by James  
Random Hacker.  
Original SSLeay License  
Original SSLeay  
Copyright (C) 1995-1998 Eric Young ([email protected])  
All rights reserved.  
signature of Ty Coon, 1 April 1990  
Ty Coon, President of Vice  
This package is an SSL implementation written by Eric Young  
That’s all there is to it!  
The implementation was written so as to conform with  
Netscapes SSL.  
Required statements for OpenSSL  
project used in this product  
This product contains OpenSSL (including the library Original  
SSLeay), which Sony uses under license with the copyright  
holder. In compliance with a request by the copyright holder of  
said software, Sony conveys the following notice and asks that  
you read it.  
This library is free for commercial and non-commercial use as  
long as the following conditions are aheared to. The following  
conditions apply to all code found in this distribution, be it the  
RC4, RSA, lhash, DES, etc., code; not just the SSL code. The  
SSL documentation included with this distribution is covered by  
the same copyright terms except that the holder is Tim Hudson  
Package name: sony-target-grel-openssl-0.9.8g-020201.src.rpm  
Copyright remains Eric Young’s, and as such any Copyright  
notices in the code are not to be removed.  
OpenSSL  
Copyright (c) 1998-2006 The OpenSSL Project. All rights  
reserved.  
If this package is used in a product, Eric Young should be given  
attribution as the author of the parts of the library used.  
This can be in the form of a textual message at program startup  
or in documentation (online or textual) provided with the  
package.  
Redistribution and use in source and binary forms, with or  
without modification, are permitted provided that the following  
conditions are met:  
1. Redistributions of source code must retain the above  
copyright notice, this list of conditions and the following  
disclaimer.  
Redistribution and use in source and binary forms, with or  
without modification, are permitted provided that the following  
conditions are met:  
2. Redistributions in binary form must reproduce the above  
copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials  
provided with the distribution.  
1. Redistributions of source code must retain the copyright  
notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above  
copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials  
provided with the distribution.  
3. All advertising materials mentioning features or use of this  
software must display the following acknowledgment:  
“This product includes software developed by the OpenSSL  
Project for use in the OpenSSL Toolkit. (http://  
www.openssl.org/)”  
3. All advertising materials mentioning features or use of this  
software must display the following acknowledgement:  
“This product includes cryptographic software written by  
Eric Young ([email protected])”  
The word ‘cryptographic’ can be left out if the rouines from  
the library being used are not cryptographic related :-).  
4. The names “OpenSSL Toolkit” and “OpenSSL Project”  
must not be used to endorse or promote products derived  
from this software without prior written permission. For  
written permission, please contact openssl-  
4. If you include any Windows specific code (or a derivative  
thereof) from the apps directory (application code) you must  
include an acknowledgement:  
“This product includes software written by Tim Hudson  
5. Products derived from this software may not be called  
“OpenSSL” nor may “OpenSSL” appear in their names  
without prior written permission of the OpenSSL Project.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS”  
AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN  
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS  
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANY  
THEORY OF LIABILITY, WHETHER IN CONTRACT,  
STRICT LIABILITY, OR TORT (INCLUDING  
HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT  
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR  
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE  
OF THIS SOFTWARE, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGE.  
The following notices are required to satisfy the license terms of  
the software that we have mentioned in this document:  
This product includes software developed by Adam Glass.  
This product includes software developed by Bill Paul.  
This product includes software developed by Charles M.  
Hannum.  
This product includes software developed by Christian E.  
Hopps.  
This product includes software developed by Christopher G.  
Demetriou.  
This product includes software developed by Christopher G.  
Demetriou for the NetBSD Project.  
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY  
OUT OF THE USE OF THIS SOFTWARE, EVEN IF  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The licence and distribution terms for any publically available  
version or derivative of this code cannot be changed. i.e. this  
code cannot simply be copied and put under another distribution  
licence [including the GNU Public Licence.]  
This product includes software developed by Christos Zoulas.  
This product includes software developed by Gardner  
Buchanan.  
This product includes software developed by Gordon W. Ross  
This product includes software developed by Jonathan Stone for  
the NetBSD Project.  
This product includes software developed by Manuel Bouyer.  
This product includes software developed by Rolf Grossmann.  
This product includes software developed by TooLs GmbH.  
This product includes software developed by the NetBSD  
Foundation, Inc. and its contributors.  
This product includes software developed by the University of  
California, Berkeley and its contributors.  
This product includes software developed by the University of  
California, Lawrence Berkeley Laboratory and its contributors.  
This product includes software developed by the University of  
California, Lawrence Berkeley Laboratory.  
FreeType  
The FreeType Project is copyright (C) 1996-2000 by David  
Turner, Robert Wilhelm, and Werner Lemberg. All rights  
reserved except as specified below.  
THE FREETYPE PROJECT IS PROVIDED ‘AS IS’  
WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED  
TO, WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT  
WILL ANY OF THE AUTHORS OR COPYRIGHT  
HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY  
THE USE OR THE INABILITY TO USE, OF THE  
FREETYPE PROJECT.  
This product includes software developed for the NetBSD  
Project by Wasabi Systems, Inc.  
Notice about NetBSD Software  
This product includes software developed for the NetBSD  
Project by Matthias Drochner..  
BSD License  
Copyright (c) 1994-2004 The NetBSD Foundation, Inc. All  
rights reserved.  
Notice about JPEG  
Parts of this product utilize the research results of the  
Independent JPEG Group.  
Redistribution and use in source and binary forms, with or  
without modification, are permitted provided that the following  
conditions are met:  
Package name sony-target-grel-libjpeg-6b-020201.src.rpm.  
In plain English:  
1. Redistributions of source code must retain the above  
copyright notice, this list of conditions and the following  
disclaimer.  
1. We don’t promise that this software works. (But if you find  
any bugs, please let us know!)  
2. You can use this software for whatever you want. You don’t  
have to pay us.  
2. Redistributions in binary form must reproduce the above  
copyright notice, this list of conditions and the following  
disclaimer in the documentation and/or other materials  
provided with the distribution.  
3. You may not pretend that you wrote this software. If you use  
it in a program, you must acknowledge somewhere in your  
documentation that you've used the IJG code.  
3. All advertising materials mentioning features or use of this  
software must display the following acknowledgement:  
This product includes software developed by the NetBSD  
Foundation, Inc. and its contributors.  
In legalese:  
The authors make NO WARRANTY or representation, either  
express or implied, with respect to this software, its quality,  
accuracy, merchantability, or fitness for a particular purpose.  
This software is provided “AS IS”, and you, its user assume the  
entire risk as to its quality and accuracy.  
4. Neither the name of The NetBSD Foundation nor the names  
of its contributors may be used to endorse or promote  
products derived from this software without specific prior  
written permission.  
This software is copyright (c) 1991-1998, Thomas G. Lane.  
All Rights Reserved except as specified below.  
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND  
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR  
IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO  
EVENT SHALL THE REGENTS OR CONTRIBUTORS BE  
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION)  
Permission is hereby granted to use, copy, modify, and distribute  
this software (or portions thereof) for any purpose, without fee,  
subject to these conditions:  
(1) If any part of the source code for this software is distributed,  
then this README file must be included, with this copyright  
and no-warranty notice unaltered; and any additions, deletions,  
or changes to the original files must be clearly indicated in  
accompanying documentation.  
(2) If only executable code is distributed, then the accompanying  
documentation must state that “this software is based in part on  
the work of the Independent JPEG Group”.  
(3) Permission for use of this software is granted only if the user  
accepts full responsibility for any undesirable consequences; the  
authors accept NO LIABILITY for damages of any kind.  
,continued  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
These conditions apply to any software derived from or based on  
the IJG code, not just to the unmodified library. If you use our  
work, you ought to acknowledge us.  
3. This notice may not be removed or altered from any source  
distribution.  
About MPEG-4 AVC and VC-1  
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT  
PORTFOLIO LICENSE AND VC-1 PATENT PORTFOLIO  
LICENSE FOR THE PERSONAL AND NON-  
Permission is NOT granted for the use of any IJG author’s name  
or company name in advertising or publicity relating to this  
software or products derived from it. This software may be  
referred to only as “the Independent JPEG Group’s software”.  
COMMERCIAL USE OF A CONSUMER TO DECODE  
VIDEO IN COMPLIANCE WITH THE AVC STANDARD  
(“AVC VIDEO”) AND/OR THE VC-1 STANDARD ("VC-1  
VIDEO") THAT WAS ENCODED BY A CONSUMER  
ENGAGED IN A PERSONAL AND NON-COMMERCIAL  
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO  
PROVIDER LICENSED TO PROVIDE AVC VIDEO AND/  
OR VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL  
BE IMPLIED FOR ANY OTHER USE. ADDITIONAL  
INFORMATION MAY BE OBTAINED FROM MPEG LA,  
L.L.C. SEE HTTP://WWW.MPEGLA.COM  
We specifically permit and encourage the use of this software as  
the basis of commercial products, provided that all warranty or  
liability claims are assumed by the product vendor.  
Notice about PuTTY Software  
This product contains some code of the application PuTTY.  
Source package: putty-0.58.tar.gz  
putty/licence.html  
PuTTY is copyright 1997-2006 Simon Tatham.  
Portions copyright Robert de Bath, Joris van Rantwijk, Delian  
Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong,  
Nicolas Barry, Justin Bradford, Ben Harris, Malcolm Smith,  
Ahmad Khalifa, Markus Kuhn, and CORE SDI S.A.  
The curl license  
COPYRIGHT AND PERMISSION NOTICE  
Copyright (c) 1996 - 2009, Daniel Stenberg, <[email protected]>.  
All rights reserved.  
Permission is hereby granted, free of charge, to any person  
obtaining a copy of this software and associated documentation  
files (the “Software”), to deal in the Software without restriction,  
including without limitation the rights to use, copy, modify,  
merge, publish, distribute, sublicense, and/or sell copies of the  
Software, and to permit persons to whom the Software is  
furnished to do so, subject to the following conditions:  
Permission to use, copy, modify, and distribute this software for  
any purpose with or without fee is hereby granted, provided that  
the above copyright notice and this permission notice appear in  
all copies.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT  
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,  
INCLUDING BUT NOT LIMITED TO THE WARRANTIES  
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY  
RIGHTS. IN NO EVENT SHALL THE AUTHORS OR  
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,  
DAMAGES OR OTHER LIABILITY, WHETHER IN AN  
ACTION OF CONTRACT, TORT OR OTHERWISE,  
ARISING FROM, OUT OF OR IN CONNECTION WITH THE  
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE  
SOFTWARE.  
The above copyright notice and this permission notice shall be  
included in all copies or substantial portions of the Software.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT  
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,  
INCLUDING BUT NOT LIMITED TO THE WARRANTIES  
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT. IN NO EVENT  
SHALL SIMON TATHAM BE LIABLE FOR ANY CLAIM,  
DAMAGES OR OTHER LIABILITY, WHETHER IN AN  
ACTION OF CONTRACT, TORT OR OTHERWISE,  
ARISING FROM, OUT OF OR IN CONNECTION WITH THE  
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE  
SOFTWARE.  
Except as contained in this notice, the name of a copyright  
holder shall not be used in advertising or otherwise to promote  
the sale, use or other dealings in this Software without prior  
written authorization of the copyright holder.  
Notice about fdlibm Software  
@(#)fdlibm.h 1.5 95/01/18  
Copyright (C) 1993 by Sun Microsystems, Inc. All rights  
reserved.  
Notice about expat  
Copyright (c) 1998, 1999, 2000 Thai Open Source Software  
Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003  
Expat maintainers.  
Developed at SunSoft, a Sun Microsystems, Inc. business.  
Permission to use, copy, modify, and distribute this software is  
freely granted,provided that this notice is preserved.  
Permission is hereby granted, free of charge, to any person  
obtaining a copy of this software and associated documentation  
files (the “Software”), to deal in the Software without restriction,  
including without limitation the rights to use, copy, modify,  
merge, publish, distribute, sublicense, and/or sell copies of the  
Software, and to permit persons to whom the Software is  
furnished to do so, subject to the following conditions:  
Notice about Root Certificates  
In addition, the Runtimes and Runtime Components may  
contain one or more root certificates (herein referred to as “Root  
Certificates”). You may not modify the Root Certificates.  
Notice about Nano-XML  
Copyright (C) 2000-2002 Marc De Scheemaecker, All Rights  
Reserved.  
The above copyright notice and this permission notice shall be  
included in all copies or substantial portions of the Software.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT  
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,  
INCLUDING BUT NOT LIMITED TO THE WARRANTIES  
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE AND NONINFRINGEMENT. IN NO EVENT  
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE  
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER  
LIABILITY, WHETHER IN AN ACTION OF CONTRACT,  
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN  
CONNECTION WITH THE SOFTWARE OR THE USE OR  
OTHER DEALINGS IN THE SOFTWARE.  
This software is provided ‘as-is’, without any express or implied  
warranty. In no event will the authors be held liable for any  
damages arising from the use of this software.  
Permission is granted to anyone to use this software for any  
purpose, including commercial applications, and to alter it and  
redistribute it freely, subject to the following restrictions:  
1. The origin of this software must not be misrepresented; you  
must not claim that you wrote the original software. If you  
use this software in a product, an acknowledgment in the  
product documentation would be appreciated but is not  
required.  
2. Altered source versions must be plainly marked as such, and  
must not be misrepresented as being the original software.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD-RE (Blu-ray Disc Rewritable) is a  
recordable and rewritable Blu-ray Disc,  
available in the same capacities as the BD  
below. The re-recordable feature makes  
extensive editing and time-shifting  
applications possible.  
Glossary  
AACS  
“Advanced Access Content System” is a  
specification for managing digital  
entertainment contents stored on the next  
generation of prerecorded and recorded  
optical media. The specification enables  
consumers to enjoy digital entertainment  
content, including high-definition content.  
BD-ROMs (Blu-ray Disc Read-Only  
Memory) are commercially produced discs  
and are available in the same capacities as the  
BD below. Other than conventional movie  
and video contents, these discs have  
enhanced features such as interactive content,  
menu operations using pop-up menus,  
selection of subtitle display, and slideshow.  
Although a BD-ROM may contain any form  
of data, most BD-ROM discs will contain  
movies in High Definition format, for  
playback on Blu-ray Disc/DVD players.  
The AVCHD format is a high definition  
digital video camera format used to record  
SD (standard definition) or HD (high  
definition) signals of either the 1080i  
*1  
*2  
specification or the 720p specification on  
DVDs, using efficient data compression  
coding technology. The MPEG-4 AVC/  
H.264 format is adopted to compress video  
data, and the Dolby Digital or Linear PCM is  
used to compress audio data. The MPEG-4  
AVC/H.264 format is capable of  
Blu-ray Disc (BD) (page 59)  
A disc format developed for recording/  
playing high-definition (HD) video (for  
HDTV, etc.), and for storing large amounts of  
data. A single layer Blu-ray Disc holds up to  
25 GB, and a dual-layer Blu-ray Disc holds  
up to 50 GB of data.  
compressing images at higher efficiency than  
that of the conventional image compression  
format. The MPEG-4 AVC/H.264 format  
enables a high definition (HD) video signal  
shot on a digital video camera recorder to be  
recorded on DVDs in the same way as for a  
standard definition (SD) television signal.  
Deep Color (page 44)  
These are video signals for which the color  
depth of signals passing through an HDMI  
jack have been enhanced. With a Non-Deep  
Color-compatible player, the number of  
colors 1 pixel can express is 24 bits  
*1  
A high definition specification that utilizes 1080  
effective scanning lines and the interlace format.  
A high definition specification that utilizes 720  
*2  
effective scanning lines and the progressive  
format.  
(16,777,216 colors). However, with a Deep  
Color-compatible player, 1 pixel can express  
more bits, such as 36 bits. With more bits, the  
gradation of color depth can be expressed  
more finely, and continuous color changes  
will be displayed more smoothly.  
BD-J application  
The BD-ROM format supports Java for  
interactive functions.  
“BD-J” offers content providers almost  
unlimited functionality when creating  
interactive BD-ROM titles.  
Dolby Digital Plus (page 63)  
Developed as an extension to Dolby Digital,  
the audio coding technology supports 7.1  
multi-channel surround sound.  
BD-R (Blu-ray Disc Recordable) is a  
recordable, write-once Blu-ray Disc,  
available in the same capacities as the BD  
below. Since contents can be recorded and  
cannot be overwritten, a BD-R can be used to  
archive valuable data or storing and  
distributing video material.  
Dolby TrueHD (page 63)  
Dolby TrueHD is a lossless coding  
technology that supports up to 8 channels of  
multi-channel surround sound for the next  
generation optical discs. The reproduced  
sound is true to the original source bit-for-bit.  
,continued  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
DTS-HD High Resolution Audio (page 63)  
Developed as an extension to DTS Digital  
Surround format. It supports a maximum  
sampling frequency of 96 kHz, and 7.1 multi-  
channel surround.  
x.v.Color is a familiar term for the xvYCC  
standard proposed by Sony.  
xvYCC is an international standard for color  
space in video.  
DTS-HD High Resolution Audio has a  
maximum transmission rate of 6 Mbps, with  
lossy compression (Lossy).  
This standard can express a wider color range  
than the currently used broadcast standard.  
24p True Cinema (page 43)  
DTS-HD Master Audio (page 63)  
DTS-HD Master Audio has a maximum  
transmission rate of 24.5 Mbps, and uses  
lossless compression (Lossless), and DTS-  
HD Master Audio corresponds to a maximum  
sampling frequency of 192 kHz, and  
maximum of 7.1ch.  
Movies shot with a film camera consist of 24  
frames per second.  
Since conventional televisions (both CRT  
and flat panels) display frames either at 1/60  
or 1/50 second intervals, the 24 frames do not  
appear at an even pace.  
When connected to a TV with 24p  
capabilities, the player displays each frame at  
1/24 second intervals — the same interval  
originally shot with the film camera, thus  
faithfully reproducing the original cinema  
image.  
HDMI (High-Definition Multimedia  
HDMI is an interface that supports both video  
and audio on a single digital connection. The  
HDMI connection carries standard- to high-  
definition video signals and multi-channel  
audio signals to AV components such as  
HDMI equipped TVs, in digital form without  
degradation.  
The HDMI specification supports HDCP  
(High-bandwidth Digital Contents  
Protection), a copy protection technology for  
digital entertainment contents for HDMI.  
LTH (Low to High) (page 60)  
LTH is a recording system that supports  
organic pigment type BD-R.  
PhotoTV HD (page 38)  
“PhotoTV HD” allows for a highly-detailed  
pictures, and photo-like expression of subtle  
textures and colors. By connecting Sony  
“PhotoTV HD” compatible devices using an  
HDMI cable, whole new world of photos can  
be enjoyed in breathtaking Full HD quality.  
For instance, the delicate texture of the  
human skin, flowers, sand and waves can  
now be displayed on a large screen in  
beautiful photo-like quality.  
Pop-up menu (page 32)  
An enhanced menu operation available on  
BD-ROMs. The pop-up menu appears when  
POP UP/MENU is pressed during playback,  
and can be operated while playback is in  
progress.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Disc information 34  
Disc Lock 31  
DISPLAY 9  
P
Index  
Parental Control 31, 47  
“Photo” 37  
Dolby Digital 21, 45  
Dolby Digital Plus 63, 77  
Dolby TrueHD 63, 77  
DTS 21, 45  
“Photo Settings” 49  
PhotoTV HD 38, 78  
Playable discs 59  
POP UP/MENU 9, 32  
Words in quotations appear  
in the on-screen displays.  
Numerics  
24p True Cinema 78  
DTS-HD 63, 78  
DVD 59  
Q
A
“Quick Start Mode” 50  
E
AACS 77  
Easy Setup 27, 53  
Enter characters 52  
External memory 23, 32,  
ANGLE 8  
AUDIO 8  
R
Region code 60  
Remote 8, 26  
“Resetting” 53  
Resetting the player 53  
Resume 9, 31, 36  
“Audio Output Priority”  
Audio output signals 63  
“Audio Settings” 35, 44  
“Auto Power Off” 50  
AVCHD 61, 77  
F
Freeze frame 9  
Front panel display 11  
S
Searching 33  
H
B
Self-diagnosis function 58  
“Setup” 39  
Slideshow 37  
Slow-motion play 9  
Software update 24, 40,  
SUBTITLE 8  
System Power-Off 16  
“System Settings” 50  
HD Audio 63  
HDMI 15, 20, 28, 42, 43,  
Batteries 26  
“BD Data” 33  
“BD/DVD Viewing  
Settings” 47  
HOME 9, 30, 39  
Home menu 39  
BD-LIVE 23, 32  
BD-R 59, 77  
L
BD-RE 59, 77  
Bitstream 55  
Language Follow 16  
Local storage 23, 32, 56  
LTH 78  
Blu-ray Disc 59, 77  
BONUSVIEW 32  
BRAVIA Sync 16, 56  
T
THEATER 8, 16  
M
Title 33  
C
MAC address 51  
MP3 audio tracks 35, 59  
“Music” 35  
TOP MENU 9  
Troubleshooting 54  
“TV Type” 41  
Chapter 33  
Child Lock 10, 57  
Color buttons 9  
Connecting  
AV amplifier  
(receiver) 19  
N
U
“Network Diagnostic” 52  
“Network Settings” 51  
“Network Update” 24, 40  
Update 24, 40  
V
“Video” 30  
“Control for HDMI” 16,  
O
Video output resolution 62  
“Video Settings” 34, 41  
One-Touch Play 16, 31  
OPTIONS 9, 32, 36, 37  
“OSD” 50  
D
X
Deep Color 44, 77  
“Dimmer” 50  
x.v.Color 44, 78  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Sherwood Turntable PM 9901 User Manual
Sony Camcorder Accessories SPK PC3 User Manual
Sony Camera Lens SAL 135F28 User Manual
Sony Ericsson Handheld Game System R008 User Manual
Sony Projector VPL PX11 User Manual
Sony Stereo System CDX 555RF User Manual
Stamina Products Fitness Equipment 20 2021 User Manual
Sunbeam Patio Heater 156281 User Manual
Sunbeam Scale FS7600 User Manual
SunBriteTV Flat Panel Television 3260HD User Manual