Silvercrest Radio KH 2299 User Manual

6
Undercupboard Radio  
KH 2299  
Undercupboard Radio  
Operating manual  
KOMPERNASS GMBH  
BURGSTRASSE 21 ⋅ D-44867 BOCHUM  
ID-Nr.: KH 2299-1/10-V4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INDEX  
PAGE  
Intended Use  
2
2
2
3
6
6
Items supplied  
Technical data  
Safety instructions  
The appliance components  
Setting up the appliance  
Fixing the kitchen radio beneath  
a wall cabinet  
7
7
Setting up the kitchen radio  
The Settings menu  
Further setting possibilities  
Radio operation  
Cleaning  
8
10  
12  
16  
16  
17  
17  
17  
Disposal  
CE Conformity  
Importer  
Warranty and Service  
Read the operating instructions carefully before using the  
appliance for the first time and preserve this booklet for later  
reference. Pass this booklet on to whoever might acquire the  
appliance at a future date.  
- 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Intended Use  
This Kitchen Radio is intended for use either free-standing or  
for assembly beneath a wall cabinet. The intended uses for  
this Kitchen Radio are the reception of FM radio transmissions  
and as an alarm/timer, using either signal tones or the radio  
itself.  
This Kitchen Radio is not intended for utilisation in commercial  
or industrial applications. The warranty does not provide  
compensation for damage caused by improper use of the  
appliance!  
Items supplied  
1 Kitchen radio KH 2299  
1 Mounting plate  
4 Screws  
1 Operating manual  
Technical data  
Power supply:  
Power consumption:  
Operation:  
220 - 240 V , 50 Hz  
~
5 W  
approx. 1.8 W  
Standby:  
Output level:  
Frequency range  
1 W at 10% THD  
UKW (FM) 87.5 – 108 MHz  
MW (AM) 526,5 – 1606,5 kHz  
Operating temperature: +5 +35°C  
~
Humidity:  
5
90 %  
~
(No condensation)  
Dimensions  
(W x H x D):  
Weight:  
27,5 x 15,7 x 6,4 cm  
1.070 g  
Protection class:  
Backup batteries  
II /  
2 x 1.5 V Type AAA/Micro  
(not supplied)  
The technical features of this appliance enable an adjustable  
reception capability that exceeds the permitted frequency  
range of 87,5–108 MHz and 526,5–1606,5 kHz. In  
some countries, different national regulations may apply to the  
assigned radio frequency ranges. Please note that informa-  
tion received outside of the assigned radio frequency ranges  
may not be utilised, passed on to third parties or otherwise  
misused.  
- 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety instructions  
• This appliance is not intended for use by individuals  
(including children) with restricted physical, physiological  
or intellectual abilities or deficiencies in experience  
and/or knowledge unless they are supervised by a person  
responsible for their safety or receive from this person  
instruction in how the appliance is to be used. Children  
should be supervised to ensure that they do not play  
with the appliance.  
• Always remove the power plug before cleaning the  
appliance.  
• Check the appliance and all parts for visible damages.  
The safety concept can work only if the appliance is in a  
faultless condition.  
• The power plug must always be easily accessible, so  
that in the event of an emergency the appliance can  
be quickly disconnected from the mains power supply.  
Risk of electrical shocks.  
• Connect the appliance only to correctly installed and  
earthed mains power sockets. Ensure that the rating of  
the local power supply tallies completely with the details  
given on the rating plate of the appliance.  
• Arrange for Customer Services to repair or replace  
connecting cables and/or appliances that are not  
functioning properly or have been damaged.  
• NEVER submerse the appliance in water. Wipe it only  
with a slightly damp cloth.  
• Do not expose the appliance to rain and never use it in  
a humid or wet environment.  
• Always take hold of the power cable by the plug.  
Do not pull on the cable itself and never touch the power  
cable with wet hands, this could result in either a short  
circuit or you receiving an electric shock.  
• Do not place the appliance, furniture or anything else  
on the power cable and ensure that it does not become  
clamped.  
• NEVER make a knot in the power cable and do NOT  
bind it together with other cables. The power cable  
should be positioned so that no one can step on or trip  
over it.  
• Ensure that the power cable does not become wet dur-  
ing operation.  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• You are not permitted to open the appliance housing or  
repair the appliance. If the housing is opened, you run  
the risk of receiving a potentially fatal electric shock and  
the warranty lapses.  
• Protect the appliance against drip and spray water.  
Do not place any water-filled vessels (e.g. flower vases)  
on or near the appliance.  
Risk of fire!  
• Do not use the appliance near hot surfaces.  
• Do not place the appliance in locations that are subject  
to direct sunlight. Otherwise, it may overheat and become  
irreparably damaged.  
• Do not locate the kitchen radio directly above hotplates.  
The kitchen radio may be damaged. There is a danger  
of fire!  
• Never leave the appliance unattended while it is being  
used.  
• Never cover the ventilation slots of the appliance while  
it is on.  
• Do not place open fire sources, such as candles, on or  
near the appliance.  
Risk of personal injury!  
• Keep the power cable and appliance away from children.  
Children frequently underestimate the dangers of electrical  
appliances.  
• Provide a stable location for the appliance.  
• Do not operate the appliance if it has sustained a fall or  
is damaged.  
• Arrange for the appliance to be checked and/or repaired  
by qualified technicians.  
• Keep batteries well away from children. Children can  
put batteries into their mouths and swallow them.  
• If a battery is swallowed medical assistance must be  
sought immediately.  
Note:  
• Some aggressive furniture finishes can have a destructive  
influence on the appliance's rubber pads. If necessary,  
place the appliance on a nonslip pad.  
Thunderstorms!  
• Equipment connected to a power supply can be damaged  
during a thunderstorm. You should therefore always  
remove the plug from the power socket when there is  
a storm.  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice regarding separation from mains-power  
The ON/AOT/OFF switch does not completely discon-  
nect the appliance from the power network. Addition-  
ally, the appliance consumes power when in standby-  
mode.  
To completely separate the appliance from mains power,  
the power plug MUST be removed from the mains power  
socket.  
Notice regarding electrical power surges(EFT /  
electrical fast transient) and electrostatic  
discharges:  
In a case of malfunction due to an electrical fast transient  
(power surge) and/or electrostatic discharge, the appliance  
must be returned to default settings in order to re-establish  
normal operation. Possibly the power supply must be  
separated and then reconnected. The batteries (if present)  
must be removed and then reinserted.  
Information regarding the handling of batteries  
The appliance uses batteries for memory conservation.  
For the handling of batteries please observe the following:  
Risk of explosion!  
• Do not throw batteries into a fire. Do not recharge the  
batteries.  
• Never open batteries, never solder or weld batteries.  
The risk of explosions and injuries exists!  
• Regularly check the condition of the batteries. Leaking  
batteries can cause damage to the appliance.  
• If you do not intend to use the appliance for an extended  
period, remove the batteries.  
• Should the batteries leak, put on a pair of protective  
gloves and clean the battery compartment and terminals  
with a dry cloth.  
Important!  
No liability/warranty will be considered for damage  
to the Kitchen Radio caused by the effects of moisture,  
water penetration or overheating!  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The appliance components  
q Mounting plate/Baseplate  
w Power cable  
e Wire aerial  
ti M1–M4  
- Memory buttons M1–M4  
o MEM/AMS  
- to save and automatically search  
for and save radio stations  
- automatic recall of saved radio  
stations  
a MEM.SCAN  
s TIMER  
- controls the timer programming  
d Illuminated clamp strip  
f AL2/VOL —  
- controls the alarm function 2  
- Volume reduction  
g AL1/VOL +  
- controls the alarm function 1  
- Volume increase  
h USER/BAND  
j LIGHT/DIMMER  
k MODE/LOCK  
- User switching,  
Radio waveband switching  
- controls the display and  
clamp strip illumination  
- recalls the settings,  
Button lock  
l DOWN  
1( UP  
- Selection button down  
- Selection button up  
2) Battery compartment  
2! ON/AOT/OFF  
- Switch the radio on/off  
controls the switch off timer  
Setting up the appliance  
First take all appliance components from the packaging and  
remove all packing foil and tape.  
Inserting the back-up batteries  
The back-up batteries ensure that the time, date and alarm  
time setting are not lost in the event of a power cut. For this  
you require two 1.5 V batteries of the type AAA/Micro.  
They are not supplied.  
1. Open the lid of the battery compartment 2)on the under-  
side of the kitchen radio.  
2. Insert the batteries. Make sure the polarities are correct.  
Otherwise, the memory receipt will not function and dam-  
age may be caused to the appliance.  
3. Close the lid of the battery compartment 2). The lid must  
audibly engage.  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note:  
The back-up batteries must be checked at least once  
per year and, if necessary, exchanged for new ones.  
Fixing the kitchen radio beneath a wall cabinet  
With the supplied mounting plate q you can fix the kitchen  
radio below, for example, a kitchen wall cabinet:  
1. Determine a suitable location for the kitchen radio.  
2. Press the two retaining levers on the back of the appliance  
down. Push the mounting plate q back and remove it.  
3. Hold the mounting plate qunder the installation location.  
Thereby, the front edge of the mounting plate qshould  
be approx. 3.5 cm behind the front of the kitchen cabinet..  
4. Mark the four points for the drillholes with a pencil.  
5. Using a spike, make a small depression at the marking  
points. Firmly secure the mounting plate q with the sup-  
plied screws.  
6. Hold the kitchen radio slanted, with the two recesses in  
the retaining lugs on the mounting plate q.  
Press the kitchen radio upwards until it audibly engages.  
Disassembly  
• To disassemble the kitchen radio, press the two retaining  
levers at the rear of the appliance downwards. Then pull  
the radio out to the front and remove it.  
• Unscrew the screws and remove the assembly plate q.  
Setting up the kitchen radio  
Do not set the kitchen radio up without the mounting plate  
q. Otherwise the speakers are covered and the sound is  
scarcely audible.  
To fit the kitchen radio with the supplied mounting plate q:  
1. Simultaneously press the two retaining levers on the back  
of the appliance down.  
Push the mounting plate q back and remove it.  
2. Push the two retainer lugs on the mounting plate q into  
the recesses on the lower rear side of the kitchen radio.  
3. Press the mounting plate qfirmly in the direction of the  
appliance rear until it audibly engages.  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Providing mains power  
• When you have completed installation of the appliance,  
insert the plug into a mains power socket. The display r  
is illuminated and the appliance tries to receive an RDS  
signal to automatically adjust the time and date.  
• For as long as the appliance waits for the RDS signal,  
the display r shows "Please wait for setting thanks".  
This can take several minutes.  
The Settings menu  
Setting the time  
Should this not succeed, you must set the clock manually. For  
this, the radio cannot be switched on (= automatic mode).  
1. In automatic mode press the button MODE/LOCK k  
once. The time display blinks.  
2. Press the buttons UP/DOWN1(/l to set the time in  
minute intervals. Pressing and holding the button changes  
the time at ten-minute intervals.  
3. Press the button MODE/LOCK k once again to save the  
time and switch to the date setting.  
If you do not press a button for 10 seconds when making the  
settings, the appliance saves the current setting and returns to  
automatic mode.  
Setting the date  
1. In automatic mode press the button MODE/LOCK k  
twice. In the display r appears "01.01.2010", the date dis-  
play flashes.  
2. Press the buttons UP/DOWN1(/l to set the date  
at day intervals. Pressing and holding the buttons chang-  
es the date at intervals of 10 days.  
3. Press the button MODE/LOCK k once again to save the  
date and to switch to setting the memory function.  
If you later press the DOWN buttonlin automatic mode,  
the display r briefly shows "DAY". Subsequently, the time  
and date display alternate themselves. To switch back to an  
exclusive time display, press the button DOWNl once  
again.  
Setting the memory functions  
You can programme in up to 6 dates, which the appliance  
will remind you of when they are reached.  
1. In automatic mode press the button MODE/LOCK k  
three times. The display r shows alternatively a date and  
the SDA 1 indicator for reminder date 1.  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press the buttons UP/DOWN1(/l to set the first  
desired reminder date. Pressing and holding one of the  
buttons changes the display in ten-minute intervals.  
3. When you press the button TIMER s, the year number is  
deactivated and thus you are reminded on this date every  
year.  
4. Should you wish to programme in further dates, press the  
button MEM.SCAN a to select the desired memory posi-  
tions 2-6.  
5. Follow the same steps with the other dates.  
6. To deactivate the memory function, programme in a date  
that lies in the past.  
7. Press the button MODE/LOCK konce again to save the  
settings of the memory function and to switch to setting  
the update function.  
Setting the update function  
Using this function, the appliance can automatically update  
the settings for the clock based on the RDS data.  
1. In automatic mode press the button MODE/LOCK kfour  
times. The display r shows "UP DATE".  
2. Press the button DOWNl, to deactivate the Actual-  
isation function. The blinking clock symbol in the dis-  
play r then disappears.  
3. Press the button UP1(to reactivate the update function.  
The hour symbol appears.  
4. Press the button MODE/LOCK konce again to save the  
settings of the update function and to switch to setting the  
12 or 24 hour mode.  
Selecting 12 or 24 hour time display  
1. In automatic mode press the button MODE/LOCK k  
five times. In the display r appears "24 HOUR" for the 24  
hour modus.  
2. Press the button DOWNl to select the 12 hour  
modus. In the display r appears "12 HOUR". Press the but-  
ton UP1( to return to the 24 hour modus.  
In the 12 hour mode "AM" appears between 0:00 and  
11:59 (ante meridiem = mornings) behind the time display,  
from 12:00 to 23:59 "PM" (post meridiem = afternoons) is  
shown in the display r.  
Press the button MODE/LOCK k to save the menu settings  
and to close it down.  
- 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Further setting possibilities  
Setting the display brightness  
Press the button LIGHT/DIMMER j repeatedly to set the  
brightness level at which the display should be illuminated.  
The brightness can be set at 3 levels.  
Illuminated clamp strip  
Documents, for example recipes, with a width of up to 10 cm  
can be inserted and automatically held in the clamp strip d.  
If you press and hold the button LIGHT/DIMMER j for two  
seconds, the downward facing lamp is switched on, which  
then illuminates the recipe. Press and hold the button j once  
again for two seconds to switch the lamp off.  
Kitchen timer  
1. Press the button TIMER s.  
2. Using the buttons UP/DOWN1(/l, set the desired  
time interval (a time span between 1 minute and 23:59  
h is possible). Pressing and holding one of the buttons  
changes the display in ten-minute intervals. Or press one  
of the buttons M1–M4 ti to recall a saved preset  
time for the kitchen timer. The following times are factory  
pre-programmed:  
Button M1 t = 5 min. (Indicator = T1)  
Button M2 y = 10 min. (Indicator = T2)  
Button M3 u = 15 min. (Indicator = T3)  
Button M4 i = 20 min. (Indicator = T4)  
3. Press the button TIMER s once again to start the kitchen  
timer. In the display r a clock icon running in reverse  
and a cooking pot symbol appears.  
4. From 30 seconds before expiry of the time span an acoustic  
signal sounds, repeating at shorter intervals the closer the  
set time approaches. When the time has expired, the alarm  
sounds continuously and with increasing volume.  
5. Press the button TIMER sto terminate the acoustic signal.  
Interrupting the kitchen timer.  
• To interrupt the kitchen timer, switch to the kitchen timer  
mode by pressing the button TIMER s.  
• Then briefly press the button TIMER s to interrupt the  
kitchen timer.  
The time is halted, the indicator blinks for 10 seconds. After  
this period the appliance returns to automatic modus. To  
restart the kitchen timer, briefly press the button TIMER s  
again to switch back into the kitchen timer mode.  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Press the button TIMER s once again. The time then con-  
tinues to run.  
• To completely switch the kitchen timer off, press and hold  
the button TIMER s for 3 seconds The clock and cooking  
pot symbol disappear.  
Programming the kitchen timer  
You can programme frequently used times for the kitchen  
timer into the appliance, so that you do not need to enter  
them in repeatedly. As the appliance can be used by several  
people, it has user switching, A/B. Both users can save 4 dif-  
ferent timer periods each.  
1. First, select the desired user. To switch between users, press  
and hold the button USER/BAND hfor two seconds.  
2. Then press the button TIMER s.  
3. Using the buttons UP/DOWN1(/l enter in the  
desired time.  
4. Press the button MEM/AMS o. On the right and next to  
the time indicator, "T" lights up.  
5. Press one of the pre-set buttons M1–M4 ti, under  
which the kitchen timer period should be saved. Its  
number is now shown to the right of the "T".  
6. Press the button MEM/AMS o once again to conclude  
the saving.  
Setting alarm times (Alarms 1 and 2)  
You can programme two alarm times into your kitchen radio.  
Alarm function  
Acoustic signal  
Symbol in the display r  
Radio  
Switched off  
no symbol  
1. In automatic mode press the button AL1/VOL. + g (or  
AL2/VOL. – f). In the display r the last set alarm time  
and the symbol for the type of alarm blink for 10 seconds.  
2. Press the buttons UP/DOWN1(/l to set the desired  
alarm time.  
3. Press the button AL1/VOL. + g (or AL2/VOL. – f) re-  
peatedly until the desired alarm function (see the table  
above) is indicated in the display r.  
4. Repeatedly press the button TIMER sto set the weekdays  
on which you require the alarm function: You can select  
- 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
between "workdays" (Mo, Tu, We, Th, Fr), "weekends"  
(Su, Sa) and "every day" (Su, Mo, Tu, We, Th, Fr, Sa).  
Thereby, orientate yourself on the weekday indicator in  
the display r:  
Mo  
Tu  
We  
Th  
= Monday  
= Tuesday  
= Wednesday  
= Thursday  
= Friday  
Fr  
Sa  
Su  
= Saturday  
= Sunday.  
5. If you hold the button TIMER s pressed down for 2 sec-  
onds, you can also, through repeated brief pressing of  
the TIMER s button, select a specific weekday (e.g. only  
"We"). The selected setting is indicated in the display r.  
6. To return to the selection of workdays, weekends or  
whole weeks, once again hold the button TIMER s  
pressed down for 2 seconds.  
7. After 10 seconds the blinking in the display stops and  
your input is saved. The appliance then returns to auto-  
matic modus.  
When the alarm signal sounds...  
• and the alarm function "Radio" has been selected, the  
radio plays for one hour at a pre-defined alarm volume.  
To halt it, press the button AL1/VOL. + g (or AL2/VOL. –  
f).  
• and the alarm function "Signaltones" has been selected,  
the signal tone sounds for 10 minutes, with an increasing  
volume. To halt it, press the button AL1/VOL. + g (or AL2/  
VOL. – f).  
The Reminder function  
The appliance can remind you of a date that you have  
set with the reminder function. In these cases, from 8:00 –  
23:00 on that day, and at every full hour, the acoustic alarm  
sounds for 10 minutes. In addition, the SDA-panel in the dis-  
play r blinks. To stop the reminder alarm, press any button.  
Radio operation  
For radio reception, completely unwind the wire aerial e  
and, with the radio switched on, determine the most favour-  
able positioning for it. The appliance has a built-in ferrite  
aerial for the reception of MW transmitters. Should the MW  
reception be insufficient, please turn the appliance towards a  
more favourable direction.  
- 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching the radio on and off  
1. To switch the radio function on, press the button ON/  
AOT/OFF 2!. In the display r the currently selected  
frequency is shown.  
2. Press the button ON/AOT/OFF 2! once again to switch  
the radio off and return the appliance to the automatic  
modus.  
Note:  
By pressing and holding the button ON/AOT/OFF  
2! you switch to the function switch-off time (see S. 15  
chapter AOT Switch-off timer).  
Manual station selection  
1. Using the button USER/BAND h, select the required  
radio frequency: MW (AM) or VHF (FM).  
2. Briefly press the button UP1( repeatedly to search for  
stations with a higher frequency than the one shown in  
the display r.  
3. Briefly press the button DOWNlrepeatedly to search  
for stations with a lower frequency than the one shown in  
the display r.  
4. Should the currently selected radio station transmit RDS  
data, the  
-indicator lights-up in the display r.  
Then the display r shows the name of the radio station,  
and the time is updated (if activated in the settings, see  
section "Setting Update function").  
Automatic station search  
You can have the kitchen radio search for stations.  
The kitchen radio searches the frequency range until it finds  
a station.  
1. Press and hold the button UP1( for two seconds: the  
kitchen radio searches for the station with the next highest  
frequency.  
2. Press and hold the button DOWNl for two seconds:  
the kitchen radio searches for the station with the next  
lowest frequency.  
Repeat these steps until you have found a radio station to  
your liking.  
Save and recall a radio station manually  
As the appliance can be used by numerous people, it is fitted  
with user switching, A/B. Both users can save different radio  
stations. To switch between users, press and hold the button  
USER/BAND h for two seconds.  
- 13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Each user can save 36 radio stations in the appliance.  
32 x VHF stations and 4 x MW stations. For saving UKW  
stations, User "A" has available:  
Preset button M1 t for the save positions A1 – A8,  
Preset button M2 y for the save positions B1 – B8,  
Preset button M3 u for the save positions C1 – C8, and  
Preset button M4 i for the save positions D1 – D8.  
Available for User "B" are:  
Preset button M1 t for the save positions 11 – 18,  
Preset button M2 y for the save positions 21 – 28,  
Preset button M3 u for the save positions 31 – 38, and  
Preset button M4 i for the save positions 41 – 48.  
Press the corresponding preset button once to address the  
save position "1", press twice for "2", etc.  
With MW radio stations, each preset button is for one of the  
4 save positions.  
1. Setting the user, the desired radio wavelength and the  
desired radio station.  
2. Press the button MEM/AMS o. In the display r the save  
position indicator and "MEM" blink.  
3. Press one of preset buttons M1–M4 ti, if necessary  
repeatedly, to save the radio station to the desired save  
position. In the display r, the indicator for the save posi-  
tion selected by you and "MEM" blink.  
4. Press the button MEM/AMS o once again. "MEM" and  
the save position are constantly indicated, the radio  
station is saved.  
5. Repeat the steps 1 to 4 (for both users) until all of the de-  
sired radio stations are saved.  
6. To recall the saved radio stations, press the correspond-  
ing preset buttons (M1–M4 ti) in radio mode, sever-  
al times if need be, until the number of the saved position  
appears in the display r.  
Automatically save and recall a radio station  
With the AMS function (Automatic Memory System), the  
radio automatically searches for radio stations and then  
saves them to the available save positions in the radio wave-  
band. Previously saved radio stations are thereby erased.  
1. Press and hold the button MEM/AMS o for two sec-  
onds. The kitchen radio automatically searches for suf-  
ficiently powerful radio stations and saves them in the  
memory.  
2. The station search can be stopped by pressing on the button  
MEM/AMS o. The most recently found radio station plays.  
- 14 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. When you press the button MEM.SCAN a, the saved  
radio stations are recalled in their sequence and each is  
played for 10 seconds.  
4. To quickly move on to another radio station, press the but-  
ton MEM.SCAN a.  
5. To quit the automatic recall, press the button MODE/  
LOCK k. The display r will then show the time for 10  
seconds.  
Adjusting the volume.  
• To reduce the sound volume, in radio operation repeat-  
edly press the button AL2/VOL — f, or hold the button  
down.  
• To increase the sound volume, in radio operation repeat-  
edly press the button AL1/VOL. + g, or hold the button  
down.  
Lock function  
You can lock the kitchen radio so that settings cannot be al-  
tered by unauthorised people or children.  
• Press and hold the button MODE/LOCK kfor 3 seconds. A  
key symbol appears in the display r.  
• When a key is pressed and the lock is activated, the key  
symbol blinks but no other functions are carried out.  
• To disable the lock function, press and hold the button  
MODE/LOCK kuntil the key symbol extinguishes.  
A.O.T. - Switch-off timer  
This appliance is fitted with a switch-off timer for up to 90  
minutes.  
1. With the radio switched on, press the button ON/AOT/  
OFF 2! down for 2 seconds to recall the function.  
2. Repeatedly press the button ON/AOT/OFF 2! to pro-  
gramme in the number of minutes, in increments of 5  
minutes, for which the appliance is to remain switched on.  
After a few seconds the display again shows the radio  
station currently being played.  
3. On expiry of the time period the appliance switches itself  
off.  
4. To simply switch the radio function off, press the button  
ON/AOT/OFF 2!.  
- 15 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning  
Warning!  
Always remove the plug before cleaning the appliance!  
Moisture penetrating into the appliance creates the risk  
of electric shock! Additionally, the kitchen radio could  
become irreparably damaged!  
Clean the housing of the kitchen radio with a slightly moist  
cloth and a mild detergent only. Ensure that moisture cannot  
permeate into the appliance during cleaning!  
Disposal  
Do not dispose of the appliance in your normal  
domestic waste. This product is subject to the  
provisions of European Directive 2002/96/EC.  
Disposing of the appliance  
• Arrange for the product, or parts of it, to be disposed of  
by a professional disposal company or by your communal  
waste facility.  
• Observe the currently applicable regulations. In case of  
doubt, please contact your waste disposal centre.  
Disposal of batteries/accumulators  
• Used batteries/rechargeable batteries may not be  
disposed of in household waste.  
• Batteries/rechargeable batteries can contain toxic  
substances which may damage the environment. There-  
fore, dispose of the batteries/rechargeable batteries in  
accordance with statutory regulations.  
• Every consumer is statutorily obliged to dispose of bat-  
teries/rechargeable batteries to a community collection  
centre in their district or to a dealer. The purpose of this  
obligation is to ensure that batteries are disposed of in a  
non-polluting manner.  
• Only dispose of batteries when they are fully discharged.  
Disposal of packaging  
Dispose of all packaging materials in an environmentally  
friendly manner.  
- 16 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CE Conformity  
This device complies, regarding conformity, to the basic  
requirements and other relevent provisions of the Low Volt-  
age Directive 2004/108/EC, the Directive for Low Voltage  
Appliances 2006/95/EC and the Eco Design Directive  
2009/125/EC (Ordinance 1275/2008 Appendix II,  
Number 1).  
Importer  
KOMPERNASS GMBH  
BURGSTRASSE 21  
44867 BOCHUM, GERMANY  
Warranty and Service  
The warranty for this appliance is for 3 years from the date  
of purchase. The appliance has been manufactured with  
care and meticulously examined before delivery. Please re-  
tain your receipt as proof of purchase. In the event of a war-  
ranty claim, please make contact by telephone with our Serv-  
ice Department. Only in this way can a post-free despatch  
for your goods be assured.  
The warranty covers only claims for material and maufactur-  
ing defects, but not for transport damage, for wearing parts  
or for damage to fragile components, e.g. buttons or batter-  
ies. This product is for private use only and is not intended for  
commercial use.  
The warranty is void in the case of abusive and improper  
handling, use of force and internal tampering not carried out  
by our authorized service branch. Your statutory rights are  
not restricted in any way by this warranty.  
The warranty period will not be extended by repairs made  
unter warranty. This applies alsoto replaced and repaired  
parts. Any damage and defects extant on purchase must be  
reported immediately after unpacking the appliance, at the  
latest, two days after the purchase date. Repairs made after  
the expiration of the warranty period are subject to payment.  
DES Ltd  
Tel.: 0871 5000 700 (£ 0.10 / minute)  
Kompernass Service Ireland  
Tel: 1850 930 412 (0,082 EUR/Min.)  
Standard call rates apply. Mobile operators may vary.  
- 17 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 18 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 19 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 20 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Car Video System PNL602B User Manual
Sharp Microwave Oven R 2120J User Manual
Soleus Air Air Conditioner SG WAC 10ESE User Manual
Sony Car Stereo System CDX GT610U User Manual
Sony VCR GA45AV User Manual
Sony Video Game Console 711719889809 User Manual
Speco Technologies Security Camera CVC 927PTZ User Manual
Star Manufacturing Food Warmer HFD 1 User Manual
Sterling Plumbing Septic System 8820025300 User Manual
Symphonic TV DVD Combo SC520FDF User Manual