Electric Multi-Purpose Slicer SAS 150 A1
Electric Multi-Purpose Slicer
Operation and Safety Notes
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
13
12
4
3
11
5
6
10
9
17
8
7
A
D
B
C
9
14
2 x
15
16 a
16
E
F
19
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Introduction
Dear Customer, .............................................................................................................Page
Intended usage .............................................................................................................Page
Items supplied................................................................................................................Page
Features .........................................................................................................................Page
Technical data...............................................................................................................Page
6
6
6
6
7
Safety
Important safety instructions.........................................................................................Page
7
Before the First Usage
First steps .......................................................................................................................Page
Setting up the appliance...............................................................................................Page
Adjust the infinite slice-thickness setting (see Fig. D)...................................................Page
8
8
8
Operation
Working advice.............................................................................................................Page
Selecting mode of operation........................................................................................Page
Setting the Vario-switch cutting blade speed...............................................................Page
Slice thickness - setting and cutting ..............................................................................Page
8
9
9
9
Cleaning and maintenance
Cleaning........................................................................................................................Page 10
Maintenance/Removing/assembling the cutting blade...........................................Page 10
Special accessories.......................................................................................................Page 10
Warranty/Customer Service...................................................................Page 11
Disposal......................................................................................................................Page 11
Declaration of Conformit/Manufacturer.......................................Page 11
GB/IE
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The following pictograms are used in these operating instructions/on the device:
Read instruction manual!
Watts (Effective power)
W
Keep children away from electrical
devices!
Observe caution and safety notes!
Damaged appliances, power cables
and power plugs mean potentially fatal
risks from electric shock. Regularly
check the condition of the appliance,
the power cables and the power plugs.
Caution–electric shock!
Danger to life!
Dispose packaging and appliance in
an environmentally-friendly way!
Proper procedure and handling.
Voltage
V
~
Electric Multi-Purpose Slicer
SAS 150 A1
use of the appliance or are caused by incorrect
operation of it.
Not for commercial use.
ꢀ
Introduction
ꢀ
Items supplied
Dear Customer,
Directly after unpacking the appliance check it to
before using the electric Multi-Purpose Slic- ensure that all components are available and that
er for the first time please read carefully
and thoroughly through these operating
there are no signs of visible damage.
instructions and the safety advice, completely famil-
iarising yourself with the appliance. You may find it
useful to open out the page illustrating the slicer and
describing both it and its operation. Retain these in-
structions for future reference and pass them on to
whoever might acquire the appliance at a future date.
1
1
1
1
1
1
Electric Multi-Purpose Slicer SAS 150 A1
Cleaning brush
Food holder plate
Slice tray
Screw helper and 2 spare adjustment screws
Operating instructions
ꢀ
ꢀ
Intended usage
Features
1
2
3
4
5
6
7
8
This appliance is intended exclusively for slicing
normal household foodstuffs. The food to be sliced
must be thawed, unpacked and free from bones
before it can be sliced with the appliance.
All other uses, and modifications to the appliance,
are deemed to be improper usage and may result
in serious physical injury. The manufacturer accepts
no liability for damages that result from improper
Blade protector
Vario-switch for blade speed
Switch for intermittent/continuous operation
Knob for unlocking the blade covering
Appliance housing
Blade cover
Cable winder/Cable depot
Power cable
6
GB/IE
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction/Safety
9
Supporting table with guide slot
Foodstuff carriage
Food holder plate with finger guard
Cutting blade
Food support plate
Regulator (Infinite control slice-thickness
controller) (Fig. C)
Screw helper
Adjustment screws
Spare adjustment screws
Slice/catch tray
Screw-clip for blade disassembly (Fig. E)
Cleaning brush (Fig. F)
Afterwards, have the slicer examined by an au-
thorised service centre before you use it again.
10
11
12
13
14
8
ꢁ
ꢁ
In the event of damage to the power cable
,
the repair may only be carried out by the manu-
facturer, his service centre or a suitably qualified
specialist.
15
16
16a
17
18
19
To avoid physical injuries:
Do not use the electric Multi-Purpose Slicer if
your hands are wet or you are standing on a
wet floor. Do not use the slicer if it is wet or moist.
The appliance may not be used outdoors.
Set up and store the electric Multi-
ꢁ
ꢁ
ꢀ
Technical data
Purpose Slicer out of reach of children.
Nominal voltage:
Nominal power:
Continuous operation
time:
230V 50Hz
~
This device is not intended to be used by persons
(including children) with restricted physical,
sensory or mental abilities or with insufficient
experience and/or knowledge, unless they
are supervised by a person who is responsible
for their safety or they have received instruction
on how to use the device from such a responsi-
ble person. Children should be supervised in
order to ensure that they do not play with the
device.
150W
COT = 10 Minutes
reinforced, non-rusting
serrated blade, 17cm
Cutting blade:
ꢀ
Safety
ꢁ
ꢁ
Do not leave the electric Multi-Purpose Slicer
unattended if it is ready for immediate use.
Important safety
instructions
Tips for personal safety
To avoid potentially fatal
electric shocks:
The electric Multi-Purpose Slicer is intended
exclusively for domestic use and not for com-
mercial purposes.
Always ensure that the slicer is safely set up or
installed before you take it into use.
ꢁ
ꢁ
The electric Multi-Purpose Slicer may only be
connected to a 230V AC electricity supply.
Always remove the plug from the
power socket before you clean the
slicer, if it malfunctions and when
you have finished using it. To disconnect the
appliance from the electricity supply never pull
the plug out by using the power cable , always
ꢁ
ꢁ
This appliance should always be used with the
10
11
food carriage
and the food holder plate
.
Exceptions are possible, if for example the size
and shape of the food to be sliced does not
permit the use of these devices. Do not use the
appliance to cut bones or deep-frozen food.
Do not use the appliance if it is damaged in
any way. Promptly arrange to have the appli-
ance repaired at an authorised service centre
or by an other suitably qualified specialist.
8
pull directly on the plug itself.
ꢁ
Never submerse the appliance in water and do
not expose it to rain or moisture. Should the ap-
pliance fall into water, First remove the plug
from the socket and then remove the appliance
from the water.
ꢁ
GB/IE
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety/Before the First Usage/Operation
17
ꢁ
Use the appliance with the supplied accesso-
ries only. No claims under the warranty nor a
liability for damages will be accepted if they re-
sult from improper or incorrect use of the slicer.
ꢂ
Place the catch tray
below the support
9
table
and on the housing such that the
sliced foods can fall in there directly and with-
out hindrance after being cut.
ꢀ
ꢀ
ꢀ
Before the First Usage
First steps
Adjust the infinite slice-thick-
ness setting (see Fig. D)
Through variable tightenings of the adjusting
16
ꢂ
ꢂ
Carefully remove the electric Multi-Purpose
Slicer from its packaging, remove all packag-
ing materials and keep them together with the
main packaging.
Clean the electric Multi-Purpose Slicer before it
comes into contact with any foodstuffs (see also
the chapter ‘Cleaning’).
screws
of the infinite slice-thickness setting
you can determine the movement rate
14
.
16
tight
ꢂ
ꢂ
Screw both of the adjusting screws
with the screwdriver
Check, by turning the infinite slice-thickness
control knob , to see if the desired movement
15
.
14
rate is suitable.
If it is not,
16
ꢀ
Setting up the appliance
- loosen both adjusting screws
movement rate or
for a lighter
further for a
16
Specific safety advice on the
placing of the appliance
- tighten both adjusting screws
stiffer movement rate.
1. Never set the electric Multi-Purpose Slicer up
on a hot surface or near an open flame.
ꢀ
ꢀ
Operation
8
2. Ensure that the power cable
does not pass
over hot or sharp-edged objects.
Working advice
8
3. Do not allow the power cable
to become
Specific safety advice for
slicing and for the handling of
the appliance
kinked or trapped and do not wrap it around
the electric Multi-Purpose Slicer.
12
when the slic-
ꢂ
ꢂ
ꢂ
Set the electric Multi-Purpose Slicer up on a
flat, non-slip surface close to a power socket.
1. Never touch the cuttingblade
er is in operation!
8
Unwind the required length of power cable
Insert the plug into the power socket.
.
There is a risk of grave personal injury!
10
2. Always use the food carriage
and the food
10
11
Place the food carriage
on the supporting
(see Fig. B). Now
holder plate
.
9
table with guide slot
press the on the blade cover
side down, so that the holding clamps (on the
(Exception: very large pieces of foodstuff).
Press the pieces of food to be sliced forward
6
high standing
11
using the food holder
.
10
underside of the food carriage ) engage. En-
sure that these have correctly engaged, in that
you check the mobility of the food carriage. Pull
3. Use the slicer only for cutting normal house-
hold foods and not for other purposes. Do not
use the slicer for cutting deep-frozen foods,
bones, foods with large kernels or for the
slicing of still packaged foods.
10
to the front for removal of the food carriage
9
from the guide slot
and lift it from the sup-
9
port table
.
4. Never use the slicer continuously for more than
10 minutes .
11
ꢂ
Push the food holder plate
on to the food
10
carriage
.
8
GB/IE
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
ꢀ
12
5. The cutting blade
continues to rotate for a
Setting the Vario-switch
cutting blade speed
short while after the slicer has been switched off.
6. For reasons of safety, the slice thickness must
be returned to the „0“ setting after use.
Low revolutions/Revolution symbol
narrow end:
Soft foodstuffs:
ꢂ
Set a low revolution speed when you want to
10
2
ꢂ
Direct the food carriage
slowly against the
cut soft foodstuffs.Push the Vario-switch
completely in the direction of the sharp end.
12
cutter . Soft foodstuffs, for example hams or
cheeses, are best cut when they are at a low
temperature/lightly chilled.
High revolutions/Revolution symbol
wide end:
Hard foodstuffs:
ꢂ
Use a high revolution speed for slicing hard
2
ꢂ
With hard foodstuffs you can direct the food car-
foodstuffs. Push the Vario-switch
in the direction of the broad end.
completely
10
12
riage
somewhat faster against the cutter
.
You can thus quickly prepare your required
amount of of sliced foods, for example salami,
bread or gherkins.
Note: Between the maximum and minimum
adjustments you can naturally also carry out
further individual settings. Practice appropriate
trial slicings.
ꢀ
Selecting mode of operation
ꢀ
Note:
Slice thickness - setting
and cutting
The two operating modes can be switched on
and off with the rocker switch for intermittent/
3
continuous operation
.
Set the required slice thickness using the control
14
knob
(see Figure C). The settings on the scale
Continuous operation/max. 10 minutes
(switch in position „I“):
do not correspond with the slice thickness in mm.
12
For safety reasons the cuttingblade
is covered
ꢂ
Set the switch for intermittent/continuous oper- in setting „0“.
3
12
ation
to position „I“. The cutting blade
runs without it being necessary to hold the switch
in this position.
ꢂ
Place the food to be sliced on the food
10
carriage
.
Halting continuous operation: Move the switch
If necessary, press the food to be sliced with
3
11
lightly against the
for intermittent/continuous operation
into
the food holder plate
13
the „0“ position and wait until the cutting blade
comes to a complete standstill.
food support
.
ꢂ
Switch the appliance on and, whilst lightly
pressing the food to be sliced forward, guide
12
it along the cutting blade . After using the
Intermittent operation (switch for
intermittent/continuous operation
in position „II“):
13
slicer always set the food support plate
into
the „0“ setting so that the sharp blade is covered.
12
is ideally suitable for cut-
ting wafer-thin slices of cold cuts or boiled ham
(see Fig. A).
ꢂ
The cutting blade
ꢂ
To safeguard your fingers always use the food
10
11
carriage
and the food holder plate
(Ex-
ception: slicing very large pieces of foodstuffs).
3
uous operation
and wait until the cutting
blade comes to a complete standstill.
GB/IE
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and maintenance
ꢀ
ꢀ
Cleaning and maintenance
Maintenance/Removing/
assembling the cutting blade
ꢀ
Cleaning
Important safety notices for
the removal and assembly of
the cutting blade!
Important safety advice for
cleaning the slicer
1. Switch the slicer off, remove the plug from the
13
1. Before starting to clean the electric Multi-Pur-
pose Slicer; switch it off, remove the power ca-
power socket and set the food support plate
into position „0“.
8
ble
support plate
from the mains socket and set the food
2.
ATTENTION! RISK OF PERSONAL
13
12
is very sharp!
into the „0“ setting.
INJURY! The cutting blade
2. Do not submerse the electric Multi-Purpose
Slicer in water.
For the removal and assembly wear appropriate
safety gloves. Otherwise, you could receive cut
injuries.
3.
ATTENTION! RISK OF SERIOUS
12
INJURY: The cutting blade
is very sharp!
6
ꢂ
ꢂ
Open the blade cover
by pressing the
4
blade cover unlock button . Remove the
6
Accessories suitable
for dishwashers!
blade cover
.
18
Remove the plastic screw clip
from the
mounting (see Fig. E) and screw the blade lock
12
10
ꢂ
ꢂ
Clean the food carriage , the food holder
of the cutting blade
the left.
out by unscrewing it to
12
11
12
and the slice
plate , the cutting blade
17
tray
in the dishwasher.
ꢂ
ꢂ
ꢂ
ꢂ
ꢂ
When taking out the blade
you grasp it at its centre.
make sure that
It is necessary to clean the electric Multi-Pur-
pose Slicer thoroughly at regular intervals as
perishable food scraps could accumulate on
the appliance or behind the cutting blade
Clean all appliance parts not suitable for the
dishwasher with a lightly moistened cloth.
12
The cutting blade
dishwasher.
can be cleaned in the
12
12
.
Clean the housing behind the cuttingblade
with a dry cloth or a soft brush.
ꢂ
12
Re-assemble the cutting blade
in a reverse
5
Wipe off the appliance housing , the cutting
blade covering , the support table with
sequence of the above instructions.
Due to the special sawtoothing and the high
6
9
13
12
guide slots
and the food support plate
quality, the cutting blade will retain its
carefully. Do not use abrasive cleaning agents,
sponges with rough surfaces or hard brushes.
sharpness for a very long time. A resharpening
of the cutting blade is not necessary. Consult
the service centre for your country if you have
12
Cleaning brush:
questions about the cutting blade
.
ATTENTION! RISK OF PERSONAL INJU-
RY! Carry out all tasks using the cleaning brush
ꢀ
19
(see Fig. F) with great care. Should it slip
Special accessories
12
close to the cutting blade , there is the risk
of receiving a severe personal injury.
Use the bristles of the cleaning brush
Round cutter:
An untoothed cutting blade, specifically for the
move remnants such as crumbs from all difficult finest of slices, is also available.
19
to re-
ꢂ
to reach positions. The flattened end can be
excellently used to remove stubborn soiling.
Orders for special accessories are be directed to
the service centre for your country.
10 GB/IE
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty/Customer Service/Disposal/Declaration of Conformit/Manufacturer
ꢀ
ꢀ
Warranty/Customer Service
Disposal
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The packaging is wholly composed of
environmentally-friendly materials that
can be disposed of at a local recycling
centre.
Do not dispose of electric equip-
ment in the household waste!
According to the European Directive 2002/96/EC
regarding used electrcial and electronic appliances
and its implementation in national law, used electri-
cal equipment must be separately collected and
disposed of at an approved recycling facility.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for
To dispose of electrical appliances that you no
private use only and is not intended for commercial longer require, please consult your local authorities
use.
or city administration.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Your statutory rights are not restricted in any way
by this warranty.
ꢀ
Declaration of Conformit/
Manufacturer
This product complies with the requirements of the
valid European and national Directives (Low Voltage
Directive 2006/95/EC, Electromagnetic Compati-
bility 2004/108/EC). Conformity has been verified.
The corresponding declarations and documents
are retained by the manufacturer.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration Kompernaß GmbH
of the warranty period are subject to payment.
Burgstraße 21
D-44867 Bochum
GB
DES UK LTD
Tel.:
0871 5000 700 (£ 0.10 / minute)
Subject to technical alterations.
e-mail: [email protected]
IE
Kompernass Service Ireland
Tel:
1850 930 412 (0,082 EUR/Min.)
Standard call rates apply.
Mobile operators may vary.
e-mail: [email protected]
GB/IE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
IAN 61458
KOMPERNASS GMBH
Burgstraße 21
D-44867 Bochum
© by ORFGEN Marketing
Last Information Update: 12/2010
Ident.-No.: SAS150A1122010-6
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|