HDMI DVD PLAYER
KH 6519
KH 6520
HDMI DVD PLAYER
Operating instructions
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
ID-Nr.: KH6519/20-12/08-V1
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
PAGE
1. Technical Data
4
4
4
4
5
5
6
2. Applications and functions
3. Package contents
4. Operating elements
5. Setting up of the DVD player
6. Safety instructions
7. Remote control
7.1 Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
7.2 Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
7.3 Replacing the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
8. Connecting the DVD Player to a television
6
8.1 Connecting to a television via ScartCable/RGB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
8.2 Connecting to a television via S-Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
8.3 Connection to a television via video input (Composite Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
8.4 Connection via component signal (YPbPr/progressive scan and YUV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
8.5 Connection via VGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
8.6 Connection via HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
9. Connecting audio components to the DVD player
8
9.1 Requirements for the connection of a HiFi system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
9.2 Connecting digital audio components via digital cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
9.3 Connecting audio components via an analogue cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
9.4 Connecting the headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
10. OSD menu settings
10
10.1 Using the OSD Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
10.2 Language Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
10.3 Video settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
10.4 Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
10.5 Rating settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
10.6 Misc settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
11. Initial operation of the DVD player
14
11.1 Inserting the DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
11.2 Inserting memory cards/USB memory stickswith MP3/WMA/ MPEG4/JPEG data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
11.3 Removing memory cards/USB memory sticks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
12. Playing back DVDs, VCDs or S-VCDs
16
12.1 Features during playback of a DVD, VCD or S-VCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
13. Playback of JPEG-Photo CD/WMA/MP3/MPEG4
22
Filter function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Repeat function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Edit Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Rotation (JPEG images only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Enlargement (Zoom) (JPEG images only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
View (JPEG images only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Effects (JPEG images only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
14. CD Ripping function
15. Cleaning of the DVD player
16. Disposal
23
24
24
24
25
27
27
17. Troubleshooting
18. Glossary / Key Word Index
19. Warranty & Service
20. Importer
Read these operating instructions carefully before using the device for the first time and preserve this manual for later reference.
Pass this manual on to whoever might acquire the device at a future date.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 3 -
HDMI DVD PLAYER KH6519/6520
• ... generally of the data format CD Audio (.cda), MP3 (.mp3), Windows
Media Audio (.wma), Audio Video Interleave (.avi), Nero Digital (.mp4)
und JPEG (.jpg) on the storage media CD-R, CD-RW, USB memory sticks
as well as Memory Cards of the type CF I, CF II, SD, MS, MSPro, MMC
and SM.
1. Technical Data
This device has been tested and approved in accordance with the basic
requirements and other relevent regulations of the EMC guidelines
2004/108/EG as well as the guidelines for low voltage appliances
2006/95/EG.
You can connect to the Silvercrest KH 6519/ KH 6520 DVD player for image
outputs during playback of DVDs, VCDs, S-VCDs, Audio CDs and the MP3
data formats, Windows Media Audio and JPEG
Power supply:
Power consumption :
AC 220 V - 240 V 50 Hz
15 Watt
• Stereo and Mono televisions with the formats PAL or NTSC and the
picture formats 4:3/16:9.
~
Power consumption: Standby:0,7 W
• LCD/Plasma picture screens or video-projectors, if for this the corresponding
connection potential is available and the connection of a DVD player is pro-
vided for/allowed by the manufacturer of the playback device
Protection class:
TV standard:
II /
PAL/NTSC
Operating temperature:
Humidity:
Dimensions (L x W x H): 205 x 430 x 49 mm
+5 +35°C
~
5
90% (no condensation)
You can connect to the Silvercrest KH 6519/KH 6520 DVD player for sound
output, for example music…
~
Weight :
1,8 kg approx.
• from the speaker of one of the televisions connected to the DVD player
• from external audio components such as a HiFi system, receiver or sur-
round sound system (analogue/digital)
Video Output
Output level:
Horizontal resolution:
Signal-to-noise ratio:
1 + 0.2/-0.2 Vp-p (75 Ω)
> = 500 Lines
60 dB
Attention!
No liability/warranty will be assumed for damage resulting from improper use of
the device!
Audio Output
Impedance:
10 kΩ
Output level:
1.8 + 0.2/-0.8 Vrms (1kHz, 0dB)
0.01 % (JIS-A 1kHz, typical)
80 dB (JIS-A 1 kHz, typical)
95 dB (JIS-A 1 kHz, typical)
3. Package contents
Harmonic distortion:
Dynamic range:
Signal-to-noise ratio:
-
-
-
-
-
-
DVD-Player
Infrared remote control
2 Batteries for remote control, type AAA/ (Micro cells)
RGB Scart cable
Audio/Video RCA Cinch cable
Operating manual
Digital audio output
Coaxial output and optical output
USB port
Readable
USB memory sticks:
USB1.1 and 2.0 up to a capacity of 4 GB
4. Operating elements
Memory card slot
Readable memory cards: CFI/CFII (4 GB), SD (2 GB Not supported
SDHC), MS/MSPro (4 GB), MMC (4 GB),
SM (128 MB)
A. DVD player front panel
POWER button
q
w
e
r
t
y
u
i
o
Disc tray
OPEN/CLOSE button
Display
Standby light (green)
IR Sensor for the remote control
Front cover
Headphone output (Behind the front screen)
Memory card slot for SD/MMC/MS/MSPro and MS cards
(behind the front cover)
Headphones output
Maximum
Output voltage:
21.3 mV
2. Applications and functions
The SilverCrest KH 6519/ KH6520 DVD player is intended exclusively for
stationary use in enclosed spaces. The device is intended exclusively for
private, non-commercial use.
This device is intended for use as an electronic entertainment device for the
playback …
Memory card slot for CompactFlash memory cards (CF I/ CF II)
(behind the front cover)
Green indicator light for memory card slot and USB port
USB port
a
s
d
(behind the front cover)
• ...of DVD videos in 12 cm and 8 cm (diameter) formats with Country/
SKIP BACKWARDS (-)/FORWARDS (+) button
STOPꢀ BUTTON
PLAY/PAUSEꢁꢂ button
f
g
h
Regional code 2 or
, designated by the Logo
.
• ...of video formats MPEG4/MPEG4 ASP, AVI and Nero digital compressed
videos.
• ... of video-CDs (VCDs) and Super video-CDs (S-VCDs) in 12 cm and
8 cm (diameter) formats, designated by the Logo
• ... of audio-CDs in 12 cm and 8 cm (diameter) formats, designated by the
Logo
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 4 -
B. DVD player rear panel
5.Setting up of the DVD player
S VIDEO: S Video output
j
k
l
;
2)
2!
2@
2#
2$
2%
2^
2&
2*
2(
AUDIO OUT L/R: Left and right audio outputs
EURO SCART: Scart/RGB output
CENTER: Output for front and centre audio channels
SL/SR: Output for rear, left and right audio channels
FL/FR: Output for front, left and right audio channels
VGA: VGA video output
1.Carefully remove the DVD player and the supplied accessories from the
packing.
2.Remove the protective foil from the display.
3.Place the DVD player on a flat, even and firm base.
Attention!
COAXIAL: Coaxial audio output
Power cable
Do not plug the DVD player into an electrical outlet at this time. Wait
until you have connected the DVD player to a television set.
OPTICAL: optical digital audio output
HDMI: HDMI output
SUBWOOFER: Output for bass audio channel
Y, PB/CB, PR/CR: Component video outputs
VIDEO: Composite video output
In the event that you wish to change the type of video or audio connection you
must first pull the power plug from the power socket! Otherwise
the DVD player and possibly equipment connected to it could become
irreparably damaged through voltage peak strikes!
C. Remote control
6. Safety instructions
OPEN/CLOSE: Open/Close the disc tray
DIMMER: Adjust the display brightness
SKIP BACKWARDS (-)/FORWARDS (+)
VOLUME +/-: Volume increase/decrease
CLR: Clear the entry
q
w
e
r
t
y
u
i
o
a
s
d
f
g
h
j
k
l
;
2)
2!
2@
2#
2$
2%
2^
2&
2*
2(
3)
3!
3@
3#
• This device is not intended for use by individuals (including children) with
restricted physical physiological or intellectual abilities or deficiences in
experience and/or knowledge unless they are supervised by a person
responsible for their safety or receive from this person instruction in how
the device is to be used.
• Children should be supervised to ensure that they do not play with the
device.
• To avoid unintentionally switching on the device pull the power cord from
the mains supply after use and before cleaning.
• Check the device and all parts for visible damage. The safety concept can
work only if the device is in a faultless condition.
• The power plug must always be easily accessible, so that the device
can be quickly separated from the mains in the event of an emergency.
A-B: Repeat sequence
MODE: Set the playback mode
STOPꢀ: Stop playback
PLAY/PAUSEꢁꢂ: Start/Suspend playback
DVD/CARD/USB: Change between disc playback and USB/card playback
OK: Confirm input
Control buttons
ZOOM: Set the image enlargement
SEARCH: Access the search function
ANGLE: Change the camera perspective
MUTE: Switch the sound on/off
MARK: Access the bookmark function
RGB: Set the video signal to RGB
YUV: Set the video signal to YUV
Battery compartment (on the rear panel)
HDMI: Set the HDMI output
Risk of electrical shocks.
• Connect the device only to correctly installed and earthed mains sockets.
Ensure that the rating of the local power supply tallies completely with the
details given on the rating plate of the device.
• Arrange for defective power plugs and/or cables to be replaced at once
by qualified technicians or our Customer Service Department.
• Arrange for customer service to repair or replace connecting cables
and/or devices that are not functioning properly or have been damaged.
VIDEO: Set the video output
TITLE: Access the title menu
MENU: Access disc menu
SUBTITLE: Set the subtitle
NEVER submerse the device in water. Wipe it only with a slightly damp
cloth.
AUDIO: Set the audio language/channel
DISPLAY: Superimpose disc information
SETUP: Access the OSD menu
• Do not expose the device to rain and never use it in a humid or wet
environment.
• Ensure that the power cable never becomes wet during operation.
• You must not open the housing or repair the device yourself. Should you
do so, device safety can no longer be assured and the warranty will
become void.
SLOW: Slow motion function
F.RWD/F.FWD: Fast scan backwards/forwards
PRG: Access the programme function
Number buttons
STANDBY : Switch the device to standby mode
• Protect the device against drip and spray water. Do not place any water-
filled vessels (e.g. flower vases) on the device.
Risk of fire!
• Do not use the device in the vicinity of hot surfaces.
• Do not locate the device in places exposed to direct sunlight, If you do, it
may overheat and become irreparably damaged.
• Do not leave the device unattended when in use.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 5 -
• Never cover the ventilation slots of the device while it is being used.
• Do not place any open sources of fire, like candles, on the device.
Attention!
No liability/warranty will be considered for damage to the DVD player cau-
sed by the effects of moisture, water penetration or overheating!
Injury hazard
• Keep children away from the connecting cable and the device. Children
frequently underestimate the dangers of electrical devices.
• Ensure that the device stands with a safe and secure positioning.
• Do not operate the device if it has sustained a fall or is damaged. Arrange for
the device to be checked and/or repaired by qualified technicians.
• Batteries/Cells can be fatal if swallowed. Store batteries out of the reach
of children. If a battery is swallowed, medical assistance must be sought
IMMEDIATELY.
7. Remote control
7.1 Inserting the batteries
1.Open the battery compartment on the rear of the remote control.
2.Place the two supplied batteries type AAA (micro cells) into the battery
compartment. Make sure that the batteries are inserted in accordance
with the correct polarity.
• Also, store the packaging foils well away from children. There is a risk of
suffocation!
3.Replace the battery compartment cover.
Danger! Laser radiation!
This device is fitted with a „Class 1 Laser“.
• Never open the device.
• Never attempt to repair the device.
• There is invisible laser radiation inside the device.
Do not expose yourself to the laser beam.
7.2 Using the remote control
In order to guarantee faultless operation when using the remote control…
• Always point the remote control, during use, directely at the DVD player
• Make sure that there are no obstructions between the remote control and
the DVD player that will hinder reception.
• When using the remote control place yourself not more than 5 metres
from the DVD player
Note:
otherwise interferences can occur during operation of the DVD player functions
with the remote control.
Some aggressive furniture finishes can have a destructive influence on the de-
vice's rubber feet. If necessary, place the device on a nonslip pad.
7.3 Replacing the batteries
Thunderstorms!
Equipment connected to a power supply can be damaged during a thunder-
storm. You should therefore always pull the power plug from
the power socket when there is a storm.
If the operation of the DVD player via the remote control does not function
properly or does not function at all the batteries must be replaced
• Always renew all batteries in order to return the remote control to its
full performance ability.
Notice regarding electrical power surges (EFT /
electrical fast transient) and electrostatic discharges:
8. Connecting the DVD Player to a television
In a case of malfunction due to an electrical fast transient (power surge)
and/or electrostatic discharge, the device must be returned to default settings
in order to re-establish normal operation. Possibly the power supply must be
separated and then reconnected. The batteries (if present) must be removed
and then reinserted.
After setting up the DVD player, you can now connect it to a television. The
DVD player can be connected to televisions which operate with the PAL and
NTSC standards.
If you want to use the DVD player on a television with the NTSC standard
you must change the video setting in the DVD players "OSD menu".
There PAL is set as the television standard at the factory.
Notice regarding separation from mains-power
The POWER switch does not completely disconnect the device from the power
network. Additionally, the device consumes power when in standby-mode. To
completely separate the device from mains-power, the power plug MUST be re-
moved from the wall socket.
On this topic see also chapter 10.3. "Video settings: Setting the
TV standard".
Depending on the televisions equipment there are different methods of
connecting the DVD player to it, these are explained as follows.
Information regarding the handling of batteries
The remote control is operated by batteries.
For the handling of batteries please observe the following:
Risk of explosion!
Do not throw batteries into a fire. Do not recharge the batteries.
• Never open batteries, never solder or weld batteries.
The risk of explosions and injuries exists!
• Regularly check the condition of the batteries. Leaking batteries can
cause damage to the device.
• If you do not intend to use the device for an extended period, remove the
batteries.
• In the event of the batteries leaking acids, wear protective gloves.
• Clean the battery compartment and the battery contacts with a dry cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 6 -
8.1 Connecting to a television via ScartCable/RGB
Note:
Connecting the DVD player to a television with a Scart cable via the RGB input
offers a high quality connection. Select this connection variation in the case of
televisions equipped with an RGB input. If you are not sure if the television is
equipped with an RGB input then you can check this by consulting the televi-
sion's instruction manual.
8.3 Connection to a television via video input (Composite
Video)
For this connection variant the television must be equipped with Audio/Video
cinch sockets (Composite Video).
In order to connect the DVD player to a television via Composite Video you
will need
• an audio/video RCA cinch cable (supplied)
• Connect the yellow marked video socket with the yellow VIDEO socket
on the television.
• Connect the audio output sockets L/R on the rear panel of the DVD player to
the corresponding audio inputs on the television.
Make sure that the colour markings yellow, red and white correspond.
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
• In the OSD menu select the menu item Video/Video output/RGB.
• Connect the jack inscribed with EURO SCART to a television Scart socket by
using the supplied Scart cable.
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
• In the OSD menu select the menu Video/Video output/RGB.
On this topic see also chapter 10.3 Video settings: Video output.
8.2 Connecting to a television via S-Video
On this topic see also chapter 10.3 "Video settings: Video output.
Note:
8.4 Connection via component signal (YPbPr/progressive
scan and YUV)
This connection variant is only possible with very high grade televisions,
LCD/Plasma screens or Video projectors
Check with the instruction manual of the corresponding playback device to see
if this connections variant is available. It is possible that additional playback
device settings may have to be implemented.
For this type of connection the television must have available an S VIdeo input
and two audio "IN" cinch sockets. If you are not sure if the television
is equipped with S Video and/or cinch sockets you can check this by consul-
ting the television's instruction manual.
For this connection variant you will need:
• an audio cinch cable (not supplied)
• an S-video cable (not supplied) These can be obtained from your dealer.
To connect the DVD player to a television via S-video:
The so called "Component signal" is put out via the YPbPr socket of the DVD
player. Component signals are available in the form of the so called "YUV"
signal (Half image) as well as in the form of the so called "YPbPr" signal
(Full image/Progressive scan).
On this topic, please refer to Section 18. "Glossary / KeyWord
Index“.
The cable connections are the same in both cases; YPbPr-signal for Progressive
Scan however can only be used if the television (or Video projector), to which
you want to connect the DVD player, is capable of Progressive Scan.
If you are not sure whether the television (or Video projector), to which you
want to connect the DVD player is capable of Progressive Scan and has
cinch sockets available then you can check this by consulting the television's
(or Video projectors's) instruction manual.
• Connect the jack inscribed with S-VIDEO to a television S-video socket using
an S-video cable.
• Connect the audio output sockets L/R on the rear panel of the DVD player
to the corresponding audio inputs on the television with an audio cinch
cable.
Make sure that the red and white colour markings correspond.
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
• In the OSD menu select the menu Video/Video output/RGB.
On this topic see also chapter 10.3 "Video settings: Video output.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 7 -
For both variations – "YPbPr" and "YUV"– you will need
• an audio cinch cable (not supplied)
• an YUV cable (not supplied) These can be obtained from your dealer.
On the rear panel of the DVD player you will find the three so called "Com-
ponent Colour Out" sockets Y, Pb/Cb and Pr/Cr.
Make sure that the red and white colour markings correspond.
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
• In the OSD menu select the menu item Video/Video output/VGA.
On this topic see also chapter 10.3 "Video settings: Video output.
Connecting the DVD player via component signal:
8.6 Connection via HDMI
This connection variant is only possible with very high grade televisions,
LCD/Plasma screens or Video projectors
Check with the instruction manual of the corresponding playback device to
see if this connections variant is available. It is possible that additional play-
back device settings may have to be implemented. For this type of connection
you will need a HDMI cable (not supplied); this can be obtained from your
dealer.
Connecting the DVD player via HDMI:
• Connect the sockets Y (green), PB/CB (blue), and PR/CR(red) with the
corresponding sockets on the television.
• Connect the audio output sockets L/R on the rear panel of the DVD player to
the corresponding audio inputs on the television with an audio cinch ca-
ble.
Make sure that the red and white colour markings correspond.
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
• In the OSD menu select the menu item Video/Video output/Component
and/or P-Scan.
On this topic see also chapter 10.3 "Video settings: Video output.
• Connect the jack inscribed with HDMI using a HDMI cable to the
corresponding socket on the television.
8.5 Connection via VGA
This connection variant is only possible with very high grade televisions,
LCD/Plasma screens or Video projectors For this type of connection the tele-
vision must have available a VGA input and two audio "IN" cinch sockets.
Check with the instruction manual of the corresponding playback device to
see if this connections variant is available. It is possible that additional play-
back device settings may have to be implemented.
• For playback select the matching channel on your television Check with
the television's instruction manual on how you can set the AV channel.
• In the OSD menu select the menu item Video/Video output/HDMI.
On this topic see also chapter 10.3 "Video settings: Video output.
For this connection variant you will need:
• an audio cinch cable (not supplied)
• a VGA cable (not supplied) These can be obtained from your dealer.
9. Connecting audio components to the DVD
player
Besides sound playback of DVDs, VCDs/S-VCDs and audio and MP3 CDs
via the speaker of the television, to which the DVD player is connected,
sound can also be played back via external audio components such as a
HiFi system, Dolby digital/DTS receiver or a surround sound system.
Connecting the DVD player via VGA:
9.1 Requirements for the connection of a HiFi system
In order to enjoy a full sound experience when playing DVDs with the DVD
player you can connect a HiFi system to the player. Before connecting check
with the HiFi system's instruction manual to verify...
• if the HiFi system is suitable for connection to a DVD player.
• if the HiFi system is equipped with cinch sockets; if yes, you can connect
the HiFi system to the DVD player via cinch cables.
• Connect the jack inscribed with VGA using a VGA cable to the correspon-
ding socket on the television.
• Secure both plugs of the VGA cable with the screws.
• Connect the audio output sockets L/R on the rear panel of the DVD player to
the corresponding audio inputs on the television with an audio cinch ca-
ble.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 8 -
Connecting a HiFi system:
Connecting via optical cable
To connect the DVD player to a digital audio component with an optical cable:
• Remove the protective plug from the COAXIAL inscribed socket on the rear
panel of the DVD player and insert the optical cable plug.
• Insert the plug at the other end of the optical cable in the corresponding
socket of the digital audio component.
Note:
The optical cable is a glass fibre cable and must not be bent during installa-
tion. Otherwise the glass fibre contained in the cable could break and the ca-
ble would become unusable.
• Connect the audio output sockets L/R on the rear panel of the DVD player
to the corresponding audio inputs on the HiFi system with an audio cinch
cable.
Make sure that the red and white colour markings correspond.
• Check with the instruction manual which settings on the HiFi system may
be necessary in order to reproduce sound via the HiFi system during the
playback of a DVD, VCD/S-VCD, Audio or MP3 CD from the DVD player.
Note:
For an optimal sound experience place your HiFi system's loud speakers to
the left and to the right of the television, on which you connected the DVD
player.
Note:
If you connected the DVD player to the television via a Scart cable the Audio
signal will be transmitted via the cinch cable to your HiFi system as well as via
the Scart cable to the television. In this case, set the volume of the television
to the lowest value.
Make sure that no dirt can enter into the optical cable socket. This could cause
signal interference. Always insert the protective plug into the socket if no opti-
cal cable is connected.
9.2 Connecting digital audio components via digital cables
In order to enjoy sound playback throughout the room from correspondingly
equipped DVDs (recognizable by the Dolby Digital or DTS logos), you can
connect the DVD player to a digital audio component, for example, a Dolby
Digital or DTS receiver or a suitable surround sound system.
you can purchase the necessary cables for the hereafter described connection
variants from your dealer.
Firstly check with the digital components instruction manual to see if it allows
for connection to the DVD player...
• via a coaxial cable
• or via an optical cable.
Connection via coaxial cable
To connect the DVD player to a digital audio component with a digital coaxial
cable:
• Connect the COAXIAL inscribed socket to the corresponding socket on the di-
gital audio component.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 9 -
9.3 Connecting audio components via an analogue cable 10. OSD menu settings
If a digital input is not available on the audio component you can connect
the DVD player to it via conventional analogue cinch cables.
All possible settings on the DVD player can be administered with the remote
control via the so called "OnScreen display" menu (in short "OSD Menu").
The OSD Menu will be superimposed on the television screen.
Before you use the DVD player for the first time for playback of DVDs,
VCDs/S-VCDs or Audio-/MP3-CDs you must implement a few settings via
the OSD Menu. These settings are dependent amongst others on...
• the language, in which you want the OSD Menu to be displayed
• which TV standard corresponds to the television, to which you want to
connect the DVD player
To connect the DVD player with analogue cables:
• Plug a cinch cable into each of the sockets FL (front left channel), FR (front
right channel), SL (rear left channel), SR (rear right channel), CENTER (front
centre channel) and SUBWOOFER (Bass) on the rear panel of the DVD play-
er.
• Which image format your television can display
Administering settings via the OSD menu
• First insert the connector plug of the DVD player's power cord into a
power socket.
• insert the cinch cables into the corresponding analogue inputs of the
audio component.
• To switch on the DVD player press the POWER button on the front panel of the
DVD player. If the DVD player is already switched on but is in standby
mode, press the button STANDBY on the remote control to switch the DVD
player on. Standby mode is indicated by the green LED on the front panel
of the device.
9.4 Connecting the headphones
The headphones output is located behind the Front screen
• Insert the headphone’s jackplug Into the headphones output.
The device will check to see if a disc is inserted. The SilverCrest logo appears
on the television screen:
Warning!
Listening to music through headphones for long periods of time
with full volume can result in hearing damage.
If there is no disc inserted the notice NO DISC appears on the television
screen and NO DISC is shown in the display.
• Firstly please familiarize yourself with the OSD Menu's operation by
means of the following brief introduction.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 10 -
10.1 Using the OSD Menu
• To access the DVD players OSD menu press the SETUP button on the
remote control.
10.3 Video settings
In this OSD menu you can administer the settings for Aspect Ratio, View-
Mode, TV-System, Video out, Brightness, Sharpness, HD Resolution and
HD-JPEG mode.
The OSD Menu with its menu options will appear on the television screen:
Aspect Ratio:
Here you set the Image format, in which the film should
be displayed on the television screen (4:3 or 16:9). The
correct setting depends on the television to which you
would like to connect the DVD player.
The following menu options can be set:
Language, Video, Audio, Rating and Misc.
• The control buttons
will move you through the OSD Menu.
To confirm a selection or input press the OK button.
View
• To exit the selected OSD Menu option press the control button , until
Mode:
Here you can match the vertical and horizontal image
display to the playback device in use. The following can
be set:
Stretch, Original, Height adaption, Width adaption,
Auto adaption , Pan Scan (Adapting the width image
format to 4:3 presentation).
the left Menu tab (Language, Video etc.) is active. Select another Menu
tab with the control buttons
the control button
and activate the OSD Menu option with
.
• To exit the OSD menu press the SETUP button again.
10.2 Language Settings
TV system:
Video-Out:
Here you set the TV standard (NTSC/PAL/Multi) of your
playback device. Only set Multi if you have connected the
DVD player to a multi-standard television.
Here you set the Video output, through which the DVD
player is connected to the playback device.
You can preset the languages for the Menu language, Subtitle, Xvid subtitle,
Audio and DVD menu functions. These settings are valid for every DVD if the
selected language is present on the DVD.
Component
Output in YUV format via the
component outlets
RGB
Output in RGB format via the
SCART outlet, the S-Video outlet
and the Composite video outlet
Output in Progressive scan format
via the component outlets
Output in VGA format via the
VGA outlet
P-Scan
VGA
HDMI
Output in HDMI format via the
HDMI outlet
OSD
Language:
Here you set the language, in which the OSD Menu will
be displayed on the television screen.
• After selection of a video output press the OK button to confirm. An
enquiry window appears.
DVD Subtitle:
Here you set the language of the subtitle when the playback
of a DVD is displayed on the television screen (only if the
language is present on the DVD).
Here you set the character encoding for the Xvid Subtitle.
The standard setting is Unicode.
Here you set the language, in which the DVD should be
started. Films can then only be played back in the language
that you selected if this language is available on the DVD. If
the selected language is not available the DVD will start with
another language.
• Select the input Yes to carry out changes to the video output.
After the video output is changed another inquiry window appears.
• Select the input Yes when the image is correctly depicted. The video
output is now changed.
• Select the input No if the image is not correctly depicted or wait 15 se-
conds to return to the previous video output setting.
Xvid Subtitle:
Audio:
Note:
On switching from the adjustment HDMI to the adjustment RGB the display re-
turns back directly.
DVD Menu:
Here you set the language, in which the DVD Menu will
be displayed on the television screen. Not all films contain
a menu on the DVD. If a menu is available then it can only
be shown in the language that you set if this language is
available on the DVD. If the selected language is not avai-
lable then the DVD Menu will be displayed in another
language.
Note:
Should image errors occur during output via a VGA device, change the set-
ting in the TV standard menu to Multi.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 11 -
10.3.3 Adjusting the video-output using the buttons of the remote
control
Note:
The input Front Speakers can not be deactivated since sound output for the
front speakers is always switched on.
You can also directly adjust the video-output for RGB format, Progressive-
Scan format and HDMI format using the buttons on the remote control. The
buttons are marked as follows:
Subwoofer:
Set this entry to Present when a subwoofer is connected
and is to be activated.
HDMI
YUV
HDMI format
Progressive-Scan format
RGB format
In order to deactivate this sound output set the entry to
None.
RGB
Test tones:
Here you can switch on a test sound for each particular
audio output in order to check your 5.1 Surround settings.
Attention!
Surround
Center,
delay:
In the event that you set an incorrect Video output, for example "P-Scan", alt-
hough your television is not capable of Progressive Scan, then the television
screen will suddenly become black.
Here you set the delay for the centre and rear surround loud-
speakers. Each increase of the distance setting corresponds
to a delay of one millisecond. With optimal settings the
sound reaches your ears simultaneously from all directions.
Center: No delay, 0.3, 0.6, 1, 1.4, 1.7 m
This is not a defect of the television or the DVD player!
In this case press the STOPꢀ button on the front panel of the DVD player or on
the remote control.
Then press the VIDEO button on the remote control continuously until an image
appears again on the television screen.
Surround: No delay, 1, 2, 3, 4 or 5.1 m
Digital Output: here you set the DVD players digital output signal.
Off: No digital audio component connected
Brightness:
Here, with the control buttons
value (1-16) of the DVD player.
Here, with the control buttons
value (1-16) of the DVD player.
, you set the brightness
, you set the contrast
PCM: Two channel digital audio component connected
via coaxial cable or optical cable.
RAW: Multi channel digital audio component, i.e. DTS
receiver, connected via coaxial cable or optical
cable.
Here you activate/deactivate the night mode. This setting
facilitates an optimal sound playback with reduced volu-
me. The loud passages are suppressed and the quieter
passages are played back a little louder. This function is
only possible when using a digital audio component.
Here you set the Dolby ProLogic compatibility.
Sharpness:
HD-Resolution: Here you can select from several resolutions for the HDMI
output. Check, using the playback device's instruction manu-
al, which resolutions
Night Mode:
Pro Logic:
(480p/576p/720p/1080i/1080p/Auto) are supported.
In the setting Auto, the resolution supported by the television
set is utilised.
HD-JPEG mode: Here you can select from several resolutions for the image
display via the HDMI Output.
Off:
No Dolby Prologic compatible audio component
is connected to the analogue stereo output (L/R).
A Dolby Prologic compatible audio component is
connected to the analogue stereo output (L/R) of
the DVD player.
10.4 Audio settings
In this OSD menu you can administer the settings for Bass Management, the
Speaker size of individual loud speakers, Test sound, Delays, Digital audio
outputs , Night mode and ProLogic.
On:
Bass
management: Here you can Activate/Deactivate the Bass-Management.
Activation (On) is necessary if you are not using a 5.1 am-
plifier with its own speaker management but rather want
the sound output transmitted via a particular amplifier. In
this case the DVD player must be informed which kind of
speaker (Small/Large) is to be run from the respective
sound output. In this way the sound and the separation of
Highs, Middles and Basses can be optimally conformed.
Front LS,
Center LS,
Surround LS:
Here you can Activate/Deactivate the particular speaker
type and set the size.
Large: Activate sound output for large speakers.
Small: Activate sound output for small speakers.
(only with the activation of Bass-Management)
None: Deactivate sound output for these types of speakers
Download from Www.Somanuals.com. All Manuals Search And Download.
- 12 -
10.5 Rating settings
In this menu you can administer the settings for child security and change the
password.
10.6 Misc settings
In this menu you can reset the DVD player to the factory default settings and
set the playback priority of DVDs.
Note:
Only a few DVDs have a technical age restriction available. If there is no tech-
nical age restriction on the DVD your DVD players child lock feature can not
be activated. The child lock can only function if it is activated on the DVD
player and a corresponding code is available on the inserted DVD. When
you insert a DVD which, according to the child lock, may not be played a win-
dow appears on the screen, in which you must enter your password and con-
firm with OK.
Default
Settings:
Here you reset the DVD player's factory default settings.
DVD-Priority:
Here you set whether the music or film material has priority
when playing back audio DVDs that have additional film
material.
DVD-AUDIO:
DVD-VIDEO:
Music playback has priority.
Film material in Dolby 5.1 has
playback priority.
Parental control: Here you set the age release class in three levels.
G:
Only DVDs without age restrictions
can be played back.
PG-13:
Adult:
No DVDs with an age release from
13 years can be played back.
All DVDs, including those with age
restrictions over 18 can be played.
In order to activate the age release class you must select from the OSD menu
Rating the item Parental Control and enter the password (8888). Confirm
your entry by pressing the OK button. Select the item Parental Control again
and now set the desired child lock level. Confirm your entry by pressing the
OK button.
Set Password: Here you can change the preset password (8888) and
enter your own password. Only the numbers 0-9 can be
used.
To change the password select from the OSD menu the item Set password. Enter
the valid password. Confirm your entry by pressing the OK button.
Select the item Set password again and enter the new password.
Confirm your entry by pressing the OK button.
Note:
In the event that you forget your new password you can use the factory preset
password (8888).
Download from Www.Somanuals.com. All Manuals Search And Download.
- 13 -
11. Initial operation of the DVD player
11.2 Inserting memory cards/USB memory sticks
with MP3/WMA/ MPEG4/JPEG data.
After you have …
• placed the DVD player in a suitable location
• connected the DVD player to a television by one of the designated
connection options
• connected the DVD player, if desired, to a HiFi or Surround system
(analogue/digital) for example a Dolby Digital or DTS receiver
• made the remote control ready for operation by inserting the batteries
• and know how to activate and operate the OSD menu with the remote
control
Note:
The DVD-Player always starts in DVD mode. To read memory cards you press
the button "DVD/Card/USB" on the remote control. The DVD player recognizes
the data formats JPEG, MP3, WMA and MPEG4.
In order to insert memory cards of types CFI/CFII , SD, MS/MSPro, MMC
and SM into the DVD-Player:
• Switch on your television.
… the DVD player is ready for operation.
• Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected devices (i.e. an
audio component) are ready for operation and are switched on and the DVD
player is connected correctly to the television you will now see the Silvercrest
logo on the TV screen
11.1 Inserting the DVD
To play a disc with the DVD player:
• Switch on your television.
• Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected devices (i.e. an
audio component) are ready for operation and are switched on and the DVD
player is connected correctly to the television you will now see the Silvercrest
logo on the TV screen
If no disc is inserted into the DVD player's disc tray: No disc is displayed on
the television screen.
• Open the memory card slot front cover on the front panel of the DVD
player.
• Now slide the memory card into one of the memory card slots. Then
proceed with the following steps depending on the type of memory
card that you want the device to read.
If no disc is inserted into the DVD player's disc tray:
No disc is displayed on the television screen.
• Open the disc tray by pressing the button OPEN/CLOSE on the remote con-
trol or on the front panel of the DVD player. Open is displayed on the tele-
vision screen.
• Insert the disc in the disc tray with the inscribed/labled side up. For
twin-sided discs: The side you would like to play must face down.
• After you have inserted the disc press the button OPEN/CLOSE on the
remote control or on the front panel of the DVD player again to close the
disc tray.
Warning!
Always be sure to insert the memory cards into the memory card slots
as described below! Never bend the memory cards while inserting them into
the memory cards slots! With gentle pressure slide the memory card into the
memory card slot as far as it will go.
Allow the memory card to slide in without force:
• Check to make sure that the memory card is one that the DVD player is
capable of reading. Do not attempt to insert memory cards of a different
type into one of the memory card slots!
• The contents of the disc will now be loaded; this may take a few seconds.
In the meantime Reading... is displayed on the television screen.
• Make sure that you have inserted the memory card into the memory card
slot in the correct manner.
• Under no circumstances attemt to force the memory card into the memory
card slot!
Otherwise the DVD player, memory card and the data on the memory card
could be damaged!
Supported memory card types and capacities
Memory cards of the types CFI/CFII (4 GB), SD (2 GB Not supported
SDHC), MS/MSPro (4 GB), MMC (4 GB) and SM (128 MB) can be read.
Note:
Your DVD player can only read storage mediums with several data
formats if each folder contains only one data format.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 14 -
SmartMedia memory cards (SM)
MermoryStick memory cards (MS/MSPro)
MemoryStick memory cards must be inserted into the upper memory card
slot. Slide the MS memory card into the upper memory card slot, level and
with the contacts facing forward.
With this the side of the memory card, on which the contacts are located
must face downwards with the chamfered corner facing to the left.
Note:
Only SmartMedia memory cards of type 3.3 V can be used! SmartMedia me-
mory cards of type 5 V cannot be used!
You can easily distinguish SmartMedia memory cards by means of the following
diagram:
5 V
3,3 V
You must insert the SmartMedia memory cards (3,3V) into the upper memory
card slot. Insert the SM memory card into the upper memory card slot
straight and with the contacts forward.
With this the side of the memory card, on which the contacts are located
must face upwards with the chamfered corner facing to the right.
USB memory sticks (USB)
The DVD player supports USB memory sticks 1.1 and 2.0 up to a capacity
of 4 GB.
CompactFlash memory cards (CF I/CF II)
USB memory sticks must be inserted into the USB port.
CompactFlash memory cards types 1 and 2 must be inserted into the lower
memory card slot. Insert CFmemory cards into the upper memory card com-
partment contacts first and straight.
The side of the memory card with the manufacturer's logo label must face up.
MultiMediaCard- /SecureDigital memory cards (MMC/SD)
MultiMediaCard/SecureDigital memory cards must be inserted into the upper
memory card slot. Insert the MMC-/SD memory cards into the upper memory
card slot straight and with the contacts forward.
With this the side of the memory card, on which the contacts are located
must face downwards with the chamfered corner facing to the right.
• Press the DVD/CARD/USB button on the remote control. If several memory me-
diums are inserted select, with the control buttons
, the input USB. Sub-
sequently press the OK button to show the contents of the USB data carrier.
This procedure also applies to particular memory cards.
• If the USB memory stick is properly inserted into the USB port and data is
being transmitted the green indicator lamp beside the lower loading slot,
lights up.
11.3 Removing memory cards/USB memory sticks
Memory cards/USB Memory sticks should only be removed after the memory
card slot is deactivated. Thus avoiding the possibility of damage or data loss.
• Press the button DVD/CARD/USB on the remote control to return to the DVD
mode. For this a disc must be inserted into the DVD player. The green con-
trol light next to the memory card slot will go out.
• You can now remove the memory card/USB memory stick from the
memory card slot/USB port.
Note:
If, during the reading of a memory card/USB memory stick, the disc tray is
opened reading of the card will stop.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 15 -
12. Playing back DVDs, VCDs or S-VCDs
Depending on the inserted DVD/VCD/S-VCD it is possible that the contents
of the DVD/VCD/S-VCD will not playback immediately, rather first a selec-
tion menu appears on the television screen.
To play back a DVD/VCD/S-VCD with the DVD player...
• Switch on your television.
• Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected devices (i.e. an
audio component) are ready for operation and are switched on and the DVD
player is connected correctly to the television you will now see the
"SilverCrest" logo on the TV screen
In this event select the menu option which will start the playback of the film
with the control button
on the remote control.
To start playback of the film press the OK button on the remote control or press
the PLAY/PAUSEꢁꢂ button.
Play will be superimposed briefly on the television screen.
In the display on the front panel of the DVD player, the following notices
appear:
With DVDs:
• "DVD"
• the number of the currently playing title and chapter
• the played back so far time of the currently playing DVD in hours,
minutes and seconds
In the case of VCDs/S-VCDs:
• "VCD" or "S-VCD"
• the number of the currently playing title
• the played back so far time of the currently playing VCD/S-VCD in
hours,minutes and seconds
• Open the disc tray on the front panel of the DVD player by pressing the
OPEN/CLOSE button.
OPEN will show in the display on the front panel of the DVD player and
Open will be displayed on the television screen.
12.1 Features during playback of a DVD, VCD or S-VCD
During the playback of a DVD/VCD/S-VCD you can use the following DVD
player features...
• Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/labled
side up.
Pause playback
• Press the OPEN/CLOSE button again to close the disc tray.
CLOSE will show in the display on the front panel of the DVD player and
Close will be displayed on the television screen.
To pause the playback of the inserted DVD/VCD/S-VCD...
• During playback press the PLAY/PAUSEꢁꢂ button.
"ꢂ" will appear in the display on the front panel of the DVD player and
"Pause" will be displayed on the television screen.
On the television screen you will see a freeze frame of the scene that has just
been halted.
• The contents of the inserted DVD/VCD/S-VCD will now be loaded; this
may take a few seconds. In the meantime LOADING flashes in the dis-
play on the front panel of the DVD player and Reading... is displayed on
the television screen.
• To continue playback of the film press the PLAY/PAUSEꢁꢂ button.
• Playback of the inserted DVD/VCD/S-VCD starts automatically.
Stop playback
To stop playback of the film on the inserted DVD/VCD/S-VCD press the
STOPꢀ button.
Note:
With Resume function
If you have cancelled playback of the inserted DVD/VCD/S-VCD by pressing
the STOPꢀ button once the DVD player automatically saves the position where
playback was interrupted. This function is called the "resume function". Stop
[Play to continue] will be shown on the television screen. As soon as you press
the PLAY/PAUSEꢁꢂ button again playback will continue from the saved position.
Without Resume function
If you have cancelled playback of the inserted DVD/VCD/S-VCD by pressing
the STOPꢀ button once and you press the STOPꢀ button a second time the saved
position, at which you interrupted the playback, will be cleared. As soon as you
press the PLAY/PAUSEꢁꢂ button again playback of the inserted DVD/VCD/
S-VCD will start from the beginning.
DVDs, VCDs and S-VCDs, that you want to playback with the DVD player possi-
bly have a country code, which is printed on the DVD cover.
The DVD player can only playback DVDs/VCDs/S-VCDs with the country code
2.
If no country code is printed on the cover of a DVD/VCD/S-VCD...
• but instead the symbol
played back with the DVD player
, then the DVD/VCD/S-VCD can be
• then the DVD/VCD/S-VCD can possibly not be played back with the DVD
player. You can check this by attempting to play back the DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 16 -
Accessing the DVD menu (Menu)
Skip to start of chapter (SKIP)
Note:
Note:
This function may not be available on all DVDs! If you attempt to execute a
This function may not be available on all DVDs! If you attempt to carry out a
function that is not available, the symbol
screen.
is displayed on the television
function that is not available the symbol
sion screen.
will be displayed on the televi-
With many films on DVDs there is a main menu on the disc which, apart from
the option of playing back the main film, allows you to select from the following
contents:
With the SKIP FORWARDS (+) and SKIP BACKWARDS (-) buttons, within the film on the
inserted DVD/VCD/S-VCD you can, during playback...
• skip forward to the beginning of the next chapter or
• skip backward to the preceeding chapter
• the subtitle and film dialogue languages
• direct chapter selection
• to playback the films bonus material (Background information, "Making
of" etc.)
If such a menu is present on the DVD inserted in the DVD player you can ac-
cess it during playback by pressing the MENU button on the remote control.
You can select particular menu items by pressing the control buttons
on the remote control.
The respectively selected chapter will playback immediately without having
to press the PLAY/PAUSEꢁꢂ button. The number of the respectively selected
chapter will be displayed on the front panel of the DVD player to the left of
the played back so far time.
Title number input via the number buttons
To confirm the selected menu item press the PLAY/PAUSEꢁꢂ button or the OK
button on the remote control.
Note:
This function may not be available on all DVDs! If you attempt to carry out a
To return to playback press the MENU button on the remote control again.
function that is not available the symbol
sion screen.
will be displayed on the televi-
Note:
Instead of using the Skip function you can also access a title from within the
film of an inserted DVD/VCD/S-VCD directly by entering the title number via
the number buttons 0 to 9 on the remote control.
If you cancel playback by pressing the STOPꢀ button twice (Playback stop wi-
thout resume function) access to the disc's main menu is no longer possible.
Playback Control (PBC) with VCDs/S-VCDs
• To do this, during playback or when playback is cancelled, press the num-
ber buttons on the remote control that correspond to the title number that
you want i.e. press the "3" button for the third title or the buttons "1" follo-
wed by "0" for the tenth title. The entered numbers will be briefly superim-
posed on the television screen.
Many VCDs/S-VCDs have Playback Control (in short "PBC"). Playback Control
indicates a main menu that allows operation of several functions of the
VCD/S-VCD.
If PCB is available on a VCD/S-VCD inserted in the DVD player you must first
activate it in order to be able to superimpose the menu.
• To do this press the MODE button on the remote control during playback or
when playback has been stopped. The Play mode menu will be superimpo-
sed on the television screen.
• Then press the OK button on the remote control. Playback of the entered num-
ber title will now start automatically.
Search function (Search)
To select a title or chapter from the inserted DVD/VCD/S-VCD direct you can
also use the search function:
Direct chapter or time selection using the search function (Search)
Note:
• The MODE menu item is automatically selected first. By pressing the
OK button on the remote control you can select between the options Normal,
Random and PBC. Set to PBC and press the MODE button again. The Play
mode menu fades out and PBC is now switched on.
This function may not be available on all DVDs! If you attempt to execute a
function that is not available, the symbol
screen.
is displayed on the tele-vision
Entry of the time position via the search function
• To select a chapter by the input of a time position, during playback press
the SEARCH button on the remote control. The Search Menu will be superim-
posed on the television screen.
Note:
If you switch on PBC during playback it is possible that playback will be cancel-
led and starts again from the beginning.
• To superimpose the PBC main menu press the button MENU on the
remote control during playback.
• The – – – marked entry field Title is automatically the first selection.
Enter the desired title with the number buttons 0 to 9. On DVDs title 01
is most often the main film.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 17 -
Slow playback forward (Slow motion)
• Press the control button to select the – – – marked input field Chapter.
Enter the desired chapter with the number buttons 0 to 9.
• Press the control button to select the – – : – – : – – marked input field
Time. With the number buttons 0 to 9 enter the time position in hours, minu-
tes and seconds.
To playback the contents of the inserted DVD/VCD/S-VCD in slow motion …
• For slow playback forwards press the SLOW button repeatedly to set the fol-
lowing playback speeds:
Example:
To begin playback 1 hour, 5 minutes and 30 seconds from the start of
a film press successively the number buttons …
• 0, 1 for 1 hour;
Note:
• 0, 5 for 5 minutes;
During slow motion playback no sound will be played.
• 3, 0 for 30 seconds
• To continue playback from a selected position in normal speed, during
slow motion playback press the PLAY/PAUSEꢁꢂ button. Play will appear
on the television screen.
Subsequently press the OK button to start playback at the selected position.
If you want to remove a position from the entry field select the position to be
removed with the control buttons
control.
and press the CLR button on the remote
Image enlargement (Zoom)
The display now skips back to "– – –".
To fade out the Search menu press the button SEARCH again on the
remote control.
Note:
This function may not be available on all DVDs! If you attempt to carry out a
function that is not available the symbol
sion screen.
will be displayed on the televi-
Fast scan forward/backward
With fast scan you can select designated passages from the inserted DVD/
VCD/S-VCD during playback.
• For fast scan forwards/backwards press the ꢃ F.FWD and/or ꢄ F.RWD but-
ton repeatedly to set the following fast scan speeds:
During the playback of an inserted DVD/VCD/S-VCD you can enlarge the
image on the television screen in three levels. For this press the ZOOM button
on the remote control to set the following enlargement levels:
OFF
With the control buttons
sections of the enlargement can be suspended.
Note:
To switch off the zoom function and return to the normal image size press the
ZOOM button once more; Off will be displayed on the television screen.
During fast scan no sound will be played back.
• To continue playback of the film from the selected position in normal
speed, during fast scan press the PLAY/PAUSEꢁꢂ button. Play will appear
on the television screen.
Change camera aspect (Angle)
Note:
This function may not be available on all DVDs! If you attempt to carry out a
function that is not available the symbol
sion screen.
will be displayed on the televi-
Many films on DVD/VCD/S-VCD contain chapters which were recorded
simultaneously from various camera perspectives. With films that have such
chapters available you can view the same chapter from different perspectives.
For this press the ANGLE button on the remote control during playback of an
inserted DVD/VCD/S-VCD. Each press of the ANGLE button will switch to
one of the available camera perspectives.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 18 -
Superimpose/fade out subtitles
Programmed playback (PRG)
Note:
Note:
This function may not be available on all DVDs! If you attempt to execute a
This function may not be available on all DVDs/VCDs/S-VCDs! If you
function that is not available, the symbol
screen.
is displayed on the tele-vision
attempt to execute a function that is not available, the symbol
displayed on the television screen.
is
If the film on the inserted DVD/VCD/S-VCD has subtitles available you can
superimpose these on the television screen during playback by pressing the
SUBTITLE button on the remote control.
With the "Programme" function you can put together your own film programme
in so far as you can select only certain chapters of an inserted DVD/VCD/
S-VCD for playback. In this way you can determine yourself the sequence,
in which the chapters are played back. You can compile a maximum of
16 chapters of a film for programmed play.
With the first press of the
SUBTITLE button the subtitle of the first available
language will be superimposed on the television screen. With each further
press of the SUBTITLE button the subtitles of other available languages will
be superimposed successively on the television screen.
• Press the PRG button on the remote control during playback or when play-
back is cancelled.
The Programme menu will be displayed on the television screen.
The number of the currently superimposed subtitle language will be superim-
posed on the television screen ( i.e. "1/10" for the first of ten available subtit-
le languages).
When the last of the available subtitle languages is superimposed (i.e.
"10/10" for the tenth of ten available subtitle languages) you can switch off
the subtitle function by pressing the SUBTITLE button again. OFF will be
superimposed on the television screen.
Change playback language
• Use the control buttons
desired title.
• Confirm your selection by pressing the OK button. The chapter pertaining to
on the remote control to select the
Note:
This function may not be available on all DVDs/VCDs/S-VCDs! If you
the title appears.
attempt to execute a function that is not available, the symbol
displayed on the television screen.
is
With many films on DVD/VCD/S-VCD you can, during playback, select another
playback language by pressing the AUDIO button on the remote control.
The first press of the AUDIO button switches to the first available playback
language. Each additional press of the AUDIO button switches to the next
available playback language.
The currently switched on playback language will be superimposed on the
television screen.
• Use the control buttons
desired chapter.
on the remote control to select the
• Confirm your selection by pressing the OK button. The chapter will be
filed on the first memory cell.
• Select with the control buttons
further chapters and confirm your
selection by pressing the OK button. The chapters will, in turn, be filed in
the memory cells 1-16.
• To programme chapters of other titles select the entry with the control but-
tons
and confirm your selection by pressing the OK button.
• To delete the last corresponding entry select with the control buttons
the entry field Clear or press the CLR button once. By pressing the CLR
button repeatedly always the last corresponding chapter input is deleted.
• To delete all inputs select, with the control buttons
, the entry
field Clear All and confirm your selection by pressing the OK button. All
chapter entries will be deleted.
What are Title and Chapter? On this topic, please refer to Section 18.
"Glossary / KeyWord Index“.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 19 -
In the case of VCDs/S-VCDs:
• When you have programmed the desired chapter, select with the control
buttons the option Play underneath the input fields. Press the OK
• the already played back time of the currently playing VCD/SVCD in
hours, minutes and seconds
button. The programmed playback now starts with the chapter
entered in the programme memory cell 1.
• the time to the end of the currently playing film in hours, seconds and
minutes
• Within the programmed chapter you can skip to the start of the next
and/or previous chapter by pressing the SKIP FORWARDS (+) and SKIP BACK-
WARDS (-) buttons on the front panel of the DVD player or on the remote
control.
• the type of inserted disc (VCD/S-VCD)
• the current title number/the total number of titles
• the current playback language setting
• To fade out the disc information press the "DISPLAY" button again.
• To cancel the programmed playback press the STOPꢀ button on the front
panel of the DVD player or on the remote control twice during playback.
To switch on miscellaneous playback modes
Note:
Note:
If you are not sure what the title and/or chapter number is that you want to
programme, during playback select the corresponding title/chapter of the film
with the SKIP FORWARDS (+) and SKIP BACKWARDS (-) buttons and then press the DIS-
PLAY button on the remote control to superimpose all the information from the
inserted DVD/VCD/S-VCD onto the television screen. Here you will find,
amongst others, the current title and chapter numbers.
This function may not be available on all DVDs/VCDs/S-VCDs! If you
attempt to execute a function that is not available, the symbol
displayed on the television screen.
is
During playback of a DVD/VCD/S-VCD you can switch on the following
playback modes:
On this topic see also the section "Superimpose disc information".
Random playback
Programme example
You want to enter the chapters with the numbers 03 and 10 of a film on a
DVD/VCD/S-VCD for programmed playback; in this example the main film
has the title number 01:
When you switch on the random playback the chapters on the inserted
DVD/VCD/S-VCD will be played back in random order.
To switch on the random playback …
• During playback press the MODE button on the remote control. The Play
Mode menu will be superimposed on the television screen.
• The first title is automatically highlighted in the programme menu. Confirm
your selection by pressing the OK button.
• The chapter of the first title now appears. With the control buttons
select the third chapter and confirm the selection by pressing the OK
button. The chapter will be filed on the first programme position.
• With the control buttons
select the tenth chapter and confirm the se-
lection by pressing the OK button. The chapter will be filed
on the second programme position.
• The MODE menu item is automatically selected first.
• By pressing the OK button on the remote control you can select between
the options Normal and Shuffle (on VCDs/S-VCDs the option PBC
is added). Set to Shuffle and press the MODE button again. The Play mode
menu fades out and the random function is now switched on.
• To switch off the random function press the MODE button during playback
and select from the Play Mode menu under the menu item Mode, by pres-
sing the OK button, the option Normal.
• Select, with the control buttons
entry fields. Press the OK button. The programmed playback now starts with
chapter 3.
the option Start underneath the
Superimpose disc information
Note:
When you press the MODE button again the random function is switched off.
This function may not be available on all DVDs/VCDs/S-VCDs! If you
Repeat function
attempt to execute a function that is not available, the symbol
displayed on the television screen.
is
With the repeat function on DVDs you can selectively repeat a title or chapter
from the inserted DVD and with VCDs/S-VCDs repeat playback individual titles
and/or the entireVCD/S-VCD.
• To switch on repeat playback, during playback press the MODE button on
the remote control. The "Play Mode" menu will be superimposed on the te-
levision screen.
With this function you can superimpose all the available information from a
DVD/VCD/S-VCD inserted into the DVD player onto the television screen
during playback.
• For this, during playback, press the DISPLAY button on the remote control.
On the television screen will be superimposed:
With DVDs:
• Press the control button to select the menu item Repeat.
• the already played back time of the currently playing DVD in hours,
minutes and seconds
• the time to the end of the film in hours, seconds and minutes
• the type of inserted disc (DVD)
• the current title number/the total number of titles
• the current chapter number/the total number of chapters
• the current playback language setting
• the current selected subtitle setting
• the current selected perspective/the number of currently available
perspectives
• the bit rate in Mbps
Download from Www.Somanuals.com. All Manuals Search And Download.
- 20 -
With DVDs:
By pressing the OK button you select between the options Single, All, Disc
and Off.
• Select Single to continuously repeat the currently playing back chapter
until repeat playback is switched off or playback is cancelled by pressing
the STOPꢀ button twice.
• Select All to continuously repeat all the chapters one after the other, thus the
entire film, until repeat playback is switched off or playback is cancelled
by pressing the STOPꢀ button twice.
• Select Disc to continuously repeat all the titles one after the other, thus the
entire film, until repeat playback is switched off or playback is cancelled
by pressing the STOPꢀ button twice.
• If you want to place another bookmark then press the control button to
select Bookmark 2 in the superimposed field on the television screen.
Press the OK button again as soon as the passage is reached, on which
you want to place the second bookmark.
• Proceed in the same manner to place a third bookmark. Once you have
placed all the desired bookmarks press the MARK button to fade out the
bookmark menu from the screen.
• Later if you want to skip to the passages, on which you have placed book-
marks press the MARK button again.
• Select the desired bookmark with the control buttons
.
• Confirm the selection by pressing the OK button on the remote control.
Playback of the selected chapter now begins automatically from the
position, at which you placed the selected bookmark.
In the case of VCDs/S-VCDs:
By pressing the OK button you select between the options Single, All and Off.
• Select Single to continuously repeat the currently playing back title of the
VCD/S-VCD until repeat playback is switched off or playback is
cancelled by pressing the STOPꢀ button twice.
• To delete placed bookmarks press the MARK button on the remote control
to access the bookmark menu. Select a bookmark and press the CLR button
on the remote control.
• Select All to continuously repeat the entire VCD/S-VCD until
repeat playback is switched off or playback is cancelled by pressing
the STOPꢀ button twice.
• To switch off repeat playback press the MODE button during playback. Se-
lect from the Play mode menu under the menu item Repeat the option Off.
When you press the MODE button again, repeat playback is switched off.
Setting playback volume
Press the VOLUME + button on the remote control during playback to increase
playback volume or the VOLUME – button to reduce playback volume.
The changing of the volume between the values "0" (Sound off) and "16"
(Maximum volume) will be superimposed on the television screen.
Note:
Repeat sequence (A – B)
The volume can not be changed in HDMI mode.
With this function you can repeatedly playback a favourite sequence inside
a chapter of the currently playing DVD/VCD/S-VCD.
Dimmer
• During playback press the A – B button on the remote control as soon as
the desired sequence starts to playback. Repeat A will be displayed on
the television screen.
Press the DIMMER button on the remote control to reduce or increase the dis-
play brightness of the DVD player. In the display appears HIGH (bright),
NOR (normal), LOW (dark) or the display switches itself off.
• Press the A – B button again as soon as the end of the desired sequence is
played back. Pay careful attention to the fact that the start and finish of
the sequence must be located within a chapter. Repeat A-B will be dis-
played on the television screen.
Repeat playback of the selected sequence begins immediately without having to
press the PLAY/PAUSEꢁꢂ button. The sequence will continuously repeat until
you press the A – B button again in order to switch off the function. Repeat AB
off will then appear briefly on the television screen.
Mute playback sound (Mute)
To switch the playback sound to mute press the
control during playback of DVDs, VCDs/S-VCDs, Audio CDs and CD-Rs/ CD-
RWs with MP3 or WMA data. The symbol will be displayed on the
television screen. When you want to switch the playback sound back on
press the MUTE button again or the VOL + and VOL – buttons.
MUTE button on the remote
Switching off the DVD player
Bookmark function
To switch off the DVD player:
During playback of a DVD/VCD/S-VCD you can place so called "Book-
marks" in order to view again later selected passages from a film. You can
set up to three bookmarks.
• In the event that a disc inserted into the DVD player is playing back, first
cancel playback by pressing the STOPꢀ button on the front panel of the
DVD player or on the remote control twice.
• During playback of a film press the MARK button on the remote
control. On the television screen will be superimposed:
• Open the disc tray to remove a currently inserted disc from the DVD play-
er by pressing the OPEN/CLOSE button on the front panel of the DVD play-
er or on the remote control. Subsequently close the disc tray by pressing
the OPEN/CLOSE button again.
• Press the
STANDBY button on the remote control. The DVD player now
switches to the STANDBY mode. To switch the DVD player back on press the
STANDBY button again.
• As soon as the passage is reached, on which you want to place a book-
mark, press the OK button on the remote control. The exact time position of this
passage within the film is now displayed in hours, minutes and
seconds under Bookmark 1.
• To completely switch off the DVD player press the POWER button on the
front panel of the DVD player.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 21 -
13. Playback of JPEG-Photo
CD/WMA/MP3/MPEG4
Insert a storage medium into the DVD player. If you are using a memory card
or USB memory stick press the DVD/CARD/USB button. With the control buttons
select the desired medium and confirm your selection by pressing the OK
button.
The contents of the data carrier (CD, DVD, USB memory stick or memory card)
will be displayed on the television:
• You shift in the data window by pressing the control button . Select the
data that you want to include in your programme by pressing the OK button.
A tick appears in front of the selected data.
• When you have highlighted all the desired data select from the settings
window Add to program. The selected data will be listed separately.
• Select Program view in the settings window to display only the selected data.
• To delete individual data from the programme list, tag the data with the OK
button. The file will be marked with a tick.
• Then select Clear program. The tagged files will be deleted from the pro-
gramme list.
• The data is listed on the left (Data window).
• Select the settings window Browser view to display the complete data list
again.
• In the upper right you can administer several settings: Filter, Repeat,
Mode, Edit Mode, Program view and Add to program.
• In the lower right is the preview window, in which the JPEG image as well
as its size is displayed.
• Select a data with the help of the control buttons
. Confirm your
selection by pressing the OK button. The data is implemented, i.e. the JPEG-
Photo is displayed.
Filter function
You can filter out specific data types in the display.
• Switch to the settings window with the help of the control buttons
.
• Select Filter and confirm your selection with the OK button. By pressing the
OK button you can now select which data type you want to filter out: Au-
dio, Photo or Video.
Rotation (JPEG images only)
By pressing the control buttons
crements of 90°.
• Press the control button
to exit the Filter settings window.
you can rotate JPEG images in in-
Repeat function
• Select from the settings window the setting Repeat. By pressing the
OK button you can select between Single, Folder and Off:
- with the Single setting the current data is repeated until another setting is
implemented.
Enlargement (Zoom) (JPEG images only)
Press the ZOOM button on the remote control …
• once for the first enlargement level; 1 is displayed on the television
screen
- with the Folder setting, all data in the current folder is played back.
- the setting Off ends the repeat function.
• twice for the second enlargement level; 2 is displayed on the tele-
vision screen
• three times for the third enlargement level; " 3" is displayed on the televi-
sion screen
Mode
• Select the Mode setting in the settings window. By pressing the OK button
you can select between Normal, Shuffle and Music Intro:
- with the Shuffle setting the data will playback in random order.
- with the Music Intro setting 10 seconds of the MP3 data will be played
back each time.
With the control buttons
sections of the enlargement can be suspended.
To switch off the zoom function and return to the normal image size press the
ZOOM button once more; Off will be displayed on the television screen.
View (JPEG images only)
• During the JPEG playback press the TITLE button. Up to 9 images in small
format will be displayed on the television screen.
If you want to deactivate the change mode select the setting Normal.
Edit Mode
• With the help of the control buttons
you can select an image. By
In the change mode you can put together your own programme.
• Highlight the Edit Mode setting by pressing the OK button.
pressing the OK button the selected image will be displayed in large for-
mat.
• To turn to the next page press the SKIP FORWARDS (+) and/or SKIP BACKWARDS
(-) buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 22 -
Effects (JPEG images only)
With the Effect function you can cross blend JPEG images with different effects.
• Press the ANGLE button during playback. The type of cross blending will
be displayed on the television screen:
Fade out downwards,
The resulting total size of the title on the data carrier, itself dependent on the
quality of the MP3 after copying, appears next to the input Size of selected.
6.Select with the control buttons
the input Rip Quality and press the OK
button repeatedly to set the following MP3 qualities:
High:
Best:
128 Kbps
320 Kbps
Fade out upwards,
Superimpose to the centre,
Superimpose from the centre,
Drape down,
A higher quality will result in a greater quantity of MP3 data on the data
carrier after copying.
7.Select with the control buttons
the input Start ripping and press the OK
Drape up,
Random screen effects,
No screen effect.
button to start copying to the storage medium.
A window appears, in which is displayed the copying process with a
progress bar.
• To prematurely abort the copying process select the input Cancel and
confirm with the OK button.
14. CD Ripping function
Attention!
With the DVD player you can transfer music and speech data in the format
.cda (CD Audio) or from a disc onto a USB memory stick or a memory card.
With this the data will be saved to the data carrier in MP3 format.
Never remove the USB memory stick/memory card from the USB port/memo-
ry card slot during the copying process! Otherwise it could lead to data loss
on the storage medium.
Note:
Note
When transfering audio data to a data carrier be aware of the existing copy-
right laws and regulations!
The index RIPPING FOLDER with the sub folder 000 will be applied to the
storage medium for the MP3 data.
Make sure that you are producing copies for private use only and do not vio-
late applicable laws!
For each further copying process a sub folder 001, 002 and so forth, will be
applied.
1.Plug a USB memory stick into the USB port and/or a memory card into
the corresponding memory card slot.
The amount of space available on the data carrier will be displayed next to
the input Available space.
2.Place an audio CD into the disc tray.
After the disc has been read the playback window illustrated above will
appear.
3.Select with the control buttons
the OK button.
the input Ripping and confirm with
4.Now select with the control buttons
confirm with the OK button.
the input Destination and
A selection window appears showing the target storage medium available
for the ripping.
5.Select the storage medium (USB, SD/MMC, CF), on which you want to
save the MP3 data and confirm with the OK button.
Note
For the storage mediums MS/MSPro and SM select also the entry SD/MMC,
as these are inserted into the same memory card slot.
• Select with the control buttons
a title from the title list and confirm
with the OK button. The title will be marked with a tick. In the same way you
select further titles for copying in MP3 format.
• To mark all titles for copying in MP3 format, select with the control buttons
the input Select all and confirm with the OK button. All titles will be
marked with ticks.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 23 -
15. Cleaning of the DVD player
17. Troubleshooting
Clean the housing of the DVD player with a slightly damp cloth and a mild
cleanser only. When cleaning, make sure that no moisture gets into the DVD
player!
Display is blank/DVD player shows no functions even though it is
switched on
Clean the inside of the disc tray, if necessary, exclusively with a clean dry
brush (i.e. a lens brush obtainable from a photographic dealer). Never clean
the inside of the disc tray with anything moist!
A Check to see that the power cord is properly plugged into the power
socket.
B Check to make sure that there is power at the power socket, in which you
have plugged the DVD players power cord, by connecting another appli-
ance to the socket. If necessary plug the DVD players power cord into an-
other power socket.
C Check to make sure that the display is not switched off by the Dimmer
function. To do this press the DIMMER button on the remote control.
D Switch off the DVD player by pressing the POWER button and wait ten se-
conds. Then switch the DVD player back on by pressing the POWER button.
Warning!
Moisture penetrating into the DVD player creates the risk of an electric shock!
The DVD player may also be irreparably damaged!
16. Disposal
The display shows "No Disc" even though there is a disc inserted
A The disc is dirty, scratched or damaged. Clean the disc or insert another
disc.
B The Country/Region code on the inserted DVD/VCD/S-VCD does not
correspond to the Country/Region code of the DVD player. In this case
the DVD/VCD/S-VCD cannot be played with the DVD player.
Disposing of the appliance
Do not, under any circumstances, discard the appliance in the house-
hold refuse.
This appliance is subject to the European Guidelines 2002/96/EG.
Dispose of the appliance through an approved disposal centre or at your
community waste facility.
Inserted disc will not playback
Observe the currently applicable regulations. In case of doubt, please
contact your waste disposal centre.
It is possible that a layer of condensation has built up on the DVD players
laser scan lens. This can be the case especially if the DVD player has been
subjected to strong temperature fluctuations.
Disposing of batteries!
If this is the case place the DVD player in a dry environment at normal room
temperature. First remove the currently inserted disc from the disc tray. Then
leave the DVD player switched off for at least one hour without using until the
condensation film has evaporated.
Do not dispose of the batteries with household waste. Every consumer is legally
obliged to dispose of batteries at a collection site of his community/city district
or at a retail store.
This obligation is intended to ensure that batteries are disposed of in an en-
vironmentally safe fashion.
No image or Black/White image only
Only dispose of batteries when they are fully discharged.
A Check to make sure that all connection cables between the DVD player
and the television (or Video projector) are firmly inserted into the corres-
ponding sockets
Disposal of packaging
Dispose of the packaging materials in an environmentally responsible
manner.
B Check to make sure that the settings in the OSD menu match the connec-
tions variant, with which you have connected the DVD player to the televi-
sion (or Video projector).
For this see chapter 8. "Connecting the DVD player to a television“.
C Check by means of the televisions (or Video projectors) operating instruc-
tions to see if settings to the television (or Video projector) may be neces-
sary in order to use the DVD player with the television.
No sound
A Check to see if the television and/or the DVD player has been switched to
mute.
B Check to see that all connecting cables between the DVD player and po-
tentially connected audio components are firmly plugged into the
corresponding sockets
C Check to make sure that the settings in the OSD menu match the connec-
tions variant, with which you have connected the audio component to the
DVD player.
For this see chapter 9. "Connecting an audio component to the DVD
player“.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 24 -
D Check by means of the televisions operating instructions to see if settings
to the television may be necessary in order to use the DVD player with the
television.
18. Glossary / Key Word Index
E Check by means of the operating instructions for a potential connected
audio component if settings to it are necessary in order to use it with the
DVD player.
What are DVDs, VCDs and S-VCDs?
DVDs
F If you …
DVD is the short form for "Digital Versatile Disc". DVDs are a storage medium
for audio and video data; they are available in 8 cm and 12 cm (Diameter)
formats. Because of the much higher storage capacity as compared to CD-Rs/
CD-RWs DVDs can provide a playback duration of up to eight hours for the
audio and video data stored on them.
• have connected the DVD player to a stereo television and have not
connected an audio component to the DVD player or
• have connected a Dolby Prologic compatible audio component via the
analogue stereo outlet (via cinch cables to the cinch sockets L and R)
of the DVD player:
Check to see if you have selected the option "Large" in the OSD menu un-
der sub menu item Front LS.
VCDs/S-VCDs
"Video CD" (VCD) and "Super Video CD" (S-VCD) are designations for two
processes of compressed storage, thus space saving, of films on CDs. VCDs
and S-VCDs are available in 8 cm and 12 cm (Diameter) formats. Their storage
capacity is a great deal lower than that of DVDs. For this reason they only
offer a playback duration, for the saved audio and video data on them, of
20 minutes (8 cm format) and/or 74 minutes (12 cm format).
VCDs are available in two versions:
No 4:3 or 16:9 image
A Check by means of the televisions operating instructions, which image for-
mats the television has at its disposal.
B Check to see if the settings in the OSD menu match the available image
format of the television.
• Only audio and video data can be played back on version 1.1 VCDs/S-
VCDs.
Remote control not functioning
A Check to make sure that the remote control batteries have been inserted
into the battery compartment with the correct polarity.
B Check to see if the remote control batteries are exhausted and, if necessary,
change both batteries.
• PBC (Playback control) functions are available on version 2.0 VCDs/
S-VCDs. In addition still images can be played back in a higher resolution.
Playback Control (PBC)
C Make sure that there are no obstacles located between the remote
control and the DVD player.
D Be situated no more than five meters from the DVD player when using the
remote control.
Version 2.0 VCDs/S-VCDs have Playback Control (in short "PBC") at their dis-
posal. Then on the VCD/S-VCD a main menu is available, by which various
functions of the VCD/S-VCD are allowed to be operated.
What are Title and Chapter?
Playback language/ Subtitle language do not correspond to the
settings in the OSD menu
The playback language/Subtitle language setting in the OSD menu is not
Title is the name given to the largest units of image and sound units on DVDs;
on many DVDs the (Main) film has the title number 01. For bonus material
(i.e. Film trailer, background information etc.), that is available on many
DVDs, other possible title numbers can be used.
available on the inserted disc.
One or several functions can not be switched on
The selected function may not be available on all DVDs/VCDs/S-VCDs!
If you attempt to execute a function that is not available, the symbol
displayed on the television screen.
Chapter is the name given to the next smaller image and sound units beneath
title. If the title or titles on a DVD/VCD/S-VCD are subdivided into chapters,
they are assigned numbers that can be entered to select the chapters directly.
is
Bear in mind that not on all DVDs …
None of the buttons on the appliance or on the remote control are
functioning/other malfunctions
• are the DVD or the title divided into (numbered) chapters
• Chapters are also designated as "Scenes" (i.e. in the main menu of DVDs)
A Switch off the DVD player by pressing the POWER button. Wait ten
seconds, then press the "Power" button again once to switch the DVD
player back on.
What are Scart, S-Video, Composite-Video Progressive
Scan, YUV and HDMI?
B If the malfunction is still present: Reset the DVD player to its default
settings.
Scart
Scart denotes a 21 pole standardized plug connection, via which the RGB
signal, video signal and S-Video signal as well as a number of control and
auxiliary signals are transmitted.
For this see chapter 10.6. "Misc settings".
Contact one of our service partners in your area if …
• the stated function defect can not be resolved as described or
• other functional defects arise.
S-video
When the DVD player is connected to a television via S-Video the brightness
and colour signals are transmitted seperately; in this way a greater image
sharpness and a reduced so called "Colour noise" is achieved.
Colour noise refers to the overlaying of the colours, mostly heavily saturated
parts of a video image, through an irregular, restive breakdown structure.
For this see chapter 19. "Warranty and service".
Download from Www.Somanuals.com. All Manuals Search And Download.
- 25 -
Composite video
Video signal or FBAS signal; thereby it involves an image signal, in which
colour and brightness information are included at the same time.
the stereo loudspeakers. The deepest sounds are fed to a bass loudspeaker,
the so called "Subwoofer". The subwoofer can be placed in any desired loca-
tion in the room; the logic for this is that the bass sounds that the subwoofer
puts out can scarcely be localized exactely by the human ear
Progressive scan
In the normal way TV appliances and Video projectors are controlled with so
called "Half images". Thereby clearly visible line structures develop. Contrary
to this, Progressive Scan denotes the output of full images (with this DVD player,
at the output YPbPr) Progressive Scan signals can only be processed by play-
back appliances equipped for this purpose (in particular large screen tele-
visions and projectors). The image quality as opposed to traditional image
signals is considerably higher.
Dolby Digital (5.1)
Dolby Digital, also designated as AC3, is a digital sound format, by which up
to six seperate audio channels can be transported. With most of the current
DVDs, the sound is stored in the so called "Dolby Digital 5.1" format; the "5"
in the name "5.1" stands for the three front and two rear surround sound
channels, the "1" stands for the subwoofer channel.
YUV (component video out)
DTS
YUV indicates the component signal, which with this appliance is available
at the output YPbPr in the form of so called "Half images"; as a rule this is the
best signal for the control of large screen televisions and projectors, which
can not process Progressive Scan signals. As with the RGB image transmis-
sion, YUV is comprised of three separated image signals:
• the brightness signal "Y" and
DTS is the abbreviation for "Digital Theatre System" and denotes one of the
most common surround sound formats for DVDs. As with Dolby Digital 5.1,
DTS uses three front and two rear surround sound channels as well as a bass
sound channel.
What are PAL, NTSC and SECAM?
• the two colour difference signals "Pb/Cb" and "Pr/Cr"
PAL
Half images (Interlace)/Full images (Progressive Scan)
PAL is the abbreviation for "Phase Alternation Line". PAL is the mid and west
Europe (Exception: France, see the heading "SECAM") customary and most
wide spread colour television standard.
A standard television image is comprised of 576 visible lines; at first all odd
and then all even image lines are displayed alternatively, thus each displays
a half image. Thereby only 25 full images (50 Half images) can be displayed
per second. This technique is designated as "Interlace" format.
NTSC
NTSC is the abbreviation for "National Television System Committee". NTSC
Contrary to this with the so called progressive or "Progressive Scan" format
all image lines are displayed every time, that is to say 60 full images per
second are displayed. Thereby increasing the total quality of the images, still
images and text for example appear sharper.
is a colour television standard that is primarily used in the USA and Japan.
SECAM
SECAM is the abbreviation for the french "système en couleur avec mémoire".
SECAM is the customary colour television norm in France and many east
European countries and at present still the most widely spread system in
those countries.
HDMI
HDMI is short for "High Definition Multimedia Interface" and refers to a 19
contact interface for complete digital transmission of audio and video data.
With its high bandwidth HDMI handles all known today home electronics
digital video and audio formats. HDMI transmits audio data up to frequencys
of 192 kHz with text widths of up to 24 Bit on up to 8 channels. Thus not
only all of today's image and sound formats introduced into home electronics
including HDTV (up to the highest present resolution of 1080i) are transmitted
without loss of quality but also future formats with yet higher resolutions.
Audio CDs
Audio CDs contain exclusively audio data; they are also available in 8 cm
and 12 cm (Diameter) formats. The playback duration for the audio data
stored on them amounts to 20 minutes (8 cm format) and/or 74 minutes
(12 cm format). Audio data is stored on audio CDs in CDA format.
MP3
Decoder
MP3 denotes a process and/or format developed by the Fraunhofer Institute
for the compression of audio data. In the MP3 format compressed music pieces
are only a fraction of their original size, which, for example, on CD-Rs/CD-RWs
allows for storage of a considerably greater volume of music than on com-
mercially available audio CDs, on which audio data is stored in the CDA
format.
The sound on DVDs with home theatre sound is saved on the DVD in encryp-
ted (encoded) form. Different encryption formats exist for several purposes,
for example AC-3 for the playback of Dolby Digital Surround Sound.
In order to playback encrypted sound, the playback appliance (i.e. the DVD
player) and/or the audio component connected to it (for example Surround
system) must be equipped with a so called decoder, which converts the en-
crypted signal back into music and/or sound.
WMA
The Silvercrest KH 6519/KH 6520 DVD player is equiped with an AC-3
Decoder (for Dolby Digital 5.1 Surround Sound signals).
WMA ("Windows® Media Audio") is a data format developed by Microsoft®
for audio data.
Dolby Surround
JPEG
Dolby Surround is an analogue sound format, by which the two channels
of a stereo sound signal are used in order to accommodate room sound in-
formation for further channels. Dolby Surround decoders convert the signals
back into sound or music and send the audio to two additional speakers that
are situated behind the listener.
JPEG ("Joint Photographics Expert Group") denotes a wide spread graphic
format, developed by the organization with the same name, with which image
data of the colour and grey scales are compressed.
Dolby Prologic
In comparison to Dolby Surround sound format, with Dolby Prologic an addi-
tional channel in the stereo signal is used; this is the so called "Centre" channel.
The corresponding centre loudspeaker is to be situated in the middle between
Download from Www.Somanuals.com. All Manuals Search And Download.
- 26 -
Nero Digital
19. Warranty & Service
NERO is a dta compresion program, which can compress all video formats to
less than 20% of their original size, while still maintaining a high qualiyt. CDs,
which have been recorded with NERO, can contain chapters and sub-titles in
two languages. The CDs are operated via the normal buttons that are used
for DVDs. Data, which are not created with the NERO Digital "Standard Profile“,
may not play immediately or only with restrictions.
The warranty for this appliance is for 3 years from the date of purchase.
Should you have grounds for complaint, despite our high quality standards,
please contact our Service Hotline.
In the event that your complaint cannot be resolved over the telephone, you
will receive from them
• a processing number (RMA number) as well as
MPEG
• an address, to which you can send your product for warranty processing.
In the case of a mail-in shipment please enclose a copy of the purchase receipt
(sales slip). The appliance must be securely packed and rhe RMA number
clearly visible. Shipments without an RMA number can not be processed.
MPEG ("Moving Picture Experts Group") refers to a video compression for-
mat.
USB memory sticks
The term USB memory stick refers to a plugable USB device, which is appro-
ximately the size of a cigarette lighter. The expression is only colloquial and
not a designation for a type of product. For the most part with this expression
is meant a USB device that serves as an interchangeable storage media.
Note:
The warranty provisions cover only material or factory defects.
The warranty provisions do not cover
• worn out parts
• damage to breakable parts like switches or rechargeable batteries.
What are files?
As opposed to audio CDs the title on a CD-R/CD-RW with MP3-, WMA- or
JPEG data can be stored in files, for example, in order to file titles from different
genres.
The structure of an MP3-CD can, for example, appear as follows, if the MP3
data is stored in files:
This product is for private use only and is not intended for commercial use.
The warranty is void in the case of abusive and improper handling, use of force
and internal tampering not carried out by our authorized service branch.
Your statutory warranty claims are not restricted by this warranty.
20. Importer
MP3
MP3-CD
FOLDER
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
Download from Www.Somanuals.com. All Manuals Search And Download.
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- 28 -
Warranty
DVD-Player KH6519/20
In order to guarantee a cost free repair procedure please
get in touch with the service hotline. Make sure you have
your sales slip handy.
DES Ltd
Tel.: 0870/787-6177
Fax: 0870/787-6168
e-mail: [email protected]
Irish Connection
Sender, please write clearly:
Last name
Tel: 00353 (0) 87 99 62 077
Fax: 00353 18398056
e-mail: [email protected]
First name
Street
City/Town
Country
Telephone
Date/Signature
Description of fault:
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|