Sharp TV DVD Combo LC 26DV27UT User Manual

LC-26DV27UT

LC-32DV27UT

COMBINATION LIQUID CRYSTAL TELEVISION

AND DVD/CD PLAYER

COMBINÉ TÉLÉVISEUR ACL ET LECTEUR DVD/CD

COMBINACION TELEVISOR CON PANTALLA DE

CRISTAL LÍQUIDO CON DVD/DISCOS COMPACTOS

OPERATION MANUAL

MODE D’EMPLOI

MANUAL DE OPERACIÓN

LC-26DV27UT

LC-32DV27UT

IMPORTANT

Please read this operation manual before starting operating the equipment.

Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.

IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.

Download from Www.Somanuals.com. All Manuals Search And Download.

LC-26DV27UT

LC-32DV27UT

COMBINATION LIQUID CRYSTAL TELEVISION

AND DVD/CD PLAYER

ENGLISH

OPERATION MANUAL

IMPORTANT:

Model No.:

Serial No.:

• To aid reporting in case of loss or theft, please record

the TV/DVD’s model and serial numbers in the space

provided. The numbers are located at the rear of the

TV/DVD.

Location of the required Marking

CLASS 1

LASER PRODUCT

The rating sheet and the safety caution are on

the rear of the unit.

CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

COMPLIES WITH FDA PERFORMANCE STANDARDS FOR LASER PRODUCTS EXCEPT FOR DEVIATIONS PURSUANT

TO LASER NOTICE NO. 50, DATED JUNE 24, 2007.

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

The lightning flash with arrow-head

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product’s

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The exclamation point within a

triangle is intended to alert the user

to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the product.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT INFORMATION

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly

approved by the manufacturer could void the user’s authority to operate this equipment.

CAUTION:

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other

equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded

cables and connectors for connections.

“Note to CATV system installer:This reminder is provided to call the CATV system installer’s attention to Article 820-40 of

the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground

shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount

of mercury. Disposal of these materials may be regulated due to environmental

considerations. For disposal or recycling information, please contact your local

authorities, the Electronic Industries Alliance: www.eiae.org, the lamp recycling

organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP (For U.S.A. Only)

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER’S GUIDE CAREFULLY AND RETAIN FOR FUTURE

REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION SEE SERVICE

PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE.VISIBLE LASER RADIATION MAY BE

PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.

DECLARATION OF CONFORMITY

SHARP COMBINATION LIQUID CRYSTAL TELEVISION AND DVD CD PLAYER, MODEL LC-26DV27UT/LC-32DV27UT.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

RESPONSIBLE PARTY:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

TEL: 1-800-BE-SHARP

For Business Customers: URL http://www. sharpusa. com

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Download from Www.Somanuals.com. All Manuals Search And Download.

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Combination Liquid Crystal Television and DVD/CD player.

To ensure safety and many years of trouble-free operation of your product, please read the Important

Safety Instructions carefully before using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if

improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,

improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following

instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of

your Liquid Crystal Television, please read the following precautions carefully before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or

the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician

for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in

any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information

15) Power Sources—This product should be operated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to your home, consult your product dealer or local power

company. For products intended to operate from battery power, or other sources, refer to the operating

instructions.

16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can

result in a risk of fire or electric shock.

17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch

dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any

kind on the product.

18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a) When the AC cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive work by a qualified technician to restore the

product to its normal operation,

e) If the product has been dropped or damaged in any way, and

f) When the product exhibits a distinct change in performance - this indicates a need for service.

19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement

parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform

safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according

to the method recommended by the manufacturer.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool; and the like.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can

cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand,

tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall,

be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

• Selecting the location — Select a place with no direct sunlight and good ventilation.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents

and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place

the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not

designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper

ventilation is provided or the manufacturer’s instructions are followed.

• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or

applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.

• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

• The Liquid Crystal panel is a very high technology product with 1,049,088 pixels, giving you fine picture details.

Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that

this does not affect the performance of your product.

• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the

equipment due to lightning and power-line surges.

• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna

system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the

National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-

discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA

LEAD IN WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE

SYSTEM

(NEC ART 250, PART H)

NEC — NATIONAL ELECTRICAL CODE

• To prevent fire, never place any type of candle or flames on the top or near the TV set.

• To prevent fire or shock hazard, do not expose this product to dripping or splashing.

No objects filled with liquids, such as vases, should be placed on the product.

• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may scratch the panel surface.

• Use a soft damp cloth to gently wipe the panel when it is really dirty.

(It may scratch the panel surface when wiped strongly.)

• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.

• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage the

panel surface.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• Install the product on the place where the AC cord can be unplugged easily from the AC outlet, or from the AC INPUT terminal

on the rear of the product.

• CONDENSATION — Moisture will form in the operating section of the player if the player is brought from cool surroundings

into a warm room or if the temperature of the room rises suddenly. When this happens, player’s performance will be impaired.

To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the

room temperature rises gradually. Condensation may also form during the summer if the player is exposed to the breeze from

an air conditioner. In such cases, change the location of the player.

• DISC SLOT — Keep your fingers well clear of the disc slot as it is closing. Failure to do so may cause serious personal injury.

• LASER BEAM — Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the

laser beam. Doing so may cause sight damage.

• DISC — Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal

injury and product malfunction.

• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display.

• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in fire or electric

shock. Exercise special caution when using the product around children.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

CHILD SAFETY

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

• The home theater entertainment experience is a growing trend and larger flat panel

displays are popular purchases. However, flat panel displays are not always supported on

the proper stands or installed according to the manufacturer’s recommendations.

• Flat panel displays that are inappropriately situated on dressers, bookcases, shelves,

desks, speakers, chests or carts may fall over and cause injury.

THIS MANUFACTURER CARES!

• The consumer electronics industry is committed to making home entertainment enjoyable

and safe.

TUNE INTO SAFETY

• One size does NOT fit all. Follow the manufacturer’s recommendations for the safe

installation and use of your flat panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place flat panel displays on furniture that can easily be used as steps, such as a

chest of drawers.

• Remember that children can become excited while watching a program, especially on

a “larger than life” flat panel display. Care should be taken to place or install the display

where it cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables connected to the flat panel display

so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL

DISPLAY, ALWAYS:

• Use a mount that has been recommended by the display manufacturer and/or listed by

an independent laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your flat panel display, contact

your retailer about professional installation.

• Make sure that the wall where you are mounting the display is appropriate. Some wall

mounts are not designed to be mounted to walls with steel studs or old cinder block

construction. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.

Note: CEA is the preeminent trade association promoting growth in the $161 billion U.S.

consumer electronics industry. More than 2,200 companies enjoy the benefits of CEA

membership, including legislative advocacy, market research, technical training and

education, industry promotion and the fostering of business and strategic relationships.

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc

Discs which can be played back

Discs which cannot be played back

In this unit, use only discs that meet the standard, such

as those bearing the below logo marks on the disc label

surface. If you use a non-standard disc, we cannot

guarantee playback. Even if such a disc can be played back,

we cannot guarantee the image or sound quality.

The DVD logo is a registered trademark.

The discs listed below cannot be played back in general.

Even if one of these can be played back, it may not be

played back correctly. If a disc is played back by mistake,

extensively loud sounds may blow the speakers or may

damage the hearing of those in hearing range. Do not

playback the discs listed below.

CDG, Photo-CD, CD-ROM, CD-TEXT, CD-EXTRA,

SACD, PD, DVD-ROM, SVCD, CVD, VCD, DVD-RAM,

DVD+R/RW, DVD audio, HD DVD, Blu-ray, etc.

Media type

Logo mark

DVD-Video

DVD-R/RW

The following DVD-Video discs may not be played back

on this unit:

• DVD-Video that do not have the region number “1” or

“ALL”.

(Video format only)

• PAL or SECAM DVD-Video.

Audio CD*

• Prohibited or business-use DVD-Video.

CD-R/CD-RWs cannot be played back for the following

reasons.

CD-R/CD-RW (CD-DA, MP3, WMA

or JPEG format)

• Compatibility of the disc and this unit.

• Compatibility of the disc and the recorder used.

• Unfinalised discs.

Never use the following discs or accessories. It may

cause serious damage to the TV/DVD.

• Irregular shaped discs such as card shaped, heart shaped

• The ring protector or other disc accessories

• The 8 cm disc adapter

* This unit is designed to playback music Compact Discs

(CD) that conform to the CD standard. CDs that contain

(copy-restriction) signals to protect copyrights cannot be

played back.

• Some CD-R/RWs and DVD-R/RW can not be played back

depending on the recording conditions.

• Stickered or papered discs

• Discs with scotch tape, glue or other remains of labels

• 8 cm discs can be played without an adapter.

Region management information

This unit is designed and manufactured to support the

region management information that is recorded on a DVD

disc. If the region number written on the DVD disc does not

correspond to the region number of this unit, this unit cannot

play that disc.

Title/Chapter/Track

A DVD-Video has large partitions called “Titles”, and smaller

partitions within them called “Chapters”.

• The region number of this unit is “1”.

DVD DISC

• The unit will play DVD-Video discs marked with labels

containing “1” or “ALL”.

TITLE 1

CHAPTER 1

TITLE 2

CHAPTER 2

CHAPTER 1

CHAPTER 2

CHAPTER 3

Example:

ALL

A audio CD has other partitions called “Tracks”. A number is

allotted to each partition and these numbers are called “title

numbers”, “chapter numbers” or “track numbers”.

Operating DVD-Video

• Some operations of DVD-Video may be prohibited by the

manufacturer, or some operation methods or functions of

the DVD-Video may be different from the description in

this manual.

• If you attempt an operation that is prohibited by either the

disc or the unit, a “ ” mark will appear on the TV screen.

For operations prohibited by the disc, see the information

that came with the disc.

Audio CD

TRACK

• When the menu screen or the operation guide appears

during disc playback, follow the displayed information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc

Handling discs

Removing the Disc from its case

Be sure to hold the edge of disc. Do not touch the surface of

the disc.

Pick up the disc gently from the case.

• Do not scratch the disc.

• Do not get dirt on the surface of the disc.

• Do not stick a label or adhesive tape on the disc.

• Do not drop or bend the disc.

Storing discs

• Store the disc in the case to avoid any risk of scratches,

dirt or damage.

• Do not leave the disc exposed to direct sunlight or in hot

or humid places.

Cleaning discs

Wipe the disc with a clean, dry cloth from the center outward

toward the edges.

• Do not wipe the disc in a circular motion around the

center.

• Do not use liquid or aerosol cleaners.

Notes on copyright

• This product incorporates copyright protection technology

that is protected by U.S. patents and other intellectual

property rights. Use of this copyright protection

technology must be authorized by Macrovision, and is

intended for home and other limited viewing uses only

unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

• Unauthorized recording of copyrighted television

programs, films, video cassettes and other materials may

infringe the rights of copyright owners and be contrary to

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

• “HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC.”

• Manufactured under license under U.S. Patent #:

5,451,942 & other U.S. and worldwide patents issued

& pending. DTS and DTS Digital Out are registered

trademarks and the DTS logos and Symbol are

Rights Reserved

• Products that have earned the ENERGY STAR^®are

designed to protect the environment through superior

energy efficiency.

Download from Www.Somanuals.com. All Manuals Search And Download.

Supplied accessories

Make sure the following accessories are provided with the product.

LC-26DV27UT

LC-32DV27UT

COMBINATION LIQUID CRYSTAL TELEVISION

AND DVD/CD PLAYER

COMBINÉ TÉLÉVISEUR ACL ET LECTEUR DVD/CD

COMBINACION TELEVISOR CON PANTALLA DE

CRISTAL LÍQUIDO CON DVD/DISCOS COMPACTOS

OPERATION MANUAL

MODE D’EMPLOI

MANUAL DE OPERACIÓN

(Illustration is LC-26DV27UT.)

(Illustration is LC-32DV27UT.)

IMPORTANT

IMPORTANTE

Please read this operation manual before starting operating the equipment.

euillez lire ce mode d'emploi avant de commencer utiliser l'appareil.

Lea este manual de operación antes de comenzar operar el equipo.

Remote control unit “AA” size battery

AC cord (X1)

Page 9

Cable Tie (X1)

Page 9

Stand unit (X1)

Page 8

Operation manual

(X1)

(X2)

Page 10

NOTE

• Always use the AC cord supplied with the TV/DVD.

To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are

available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD- CLOTH- 3) packs. Call 1-800-BE-SHARP

for ordering, or VISIT www.sharpusa.com/SharpDirect.

QUICK REFERENCE

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.

•

Before performing work spread cushioning over the base area to lay the TV/DVD on. This will prevent it from being damaged.

CAUTION

• Attach the stand in the correct direction.

•

Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

Confirm the 8 screws supplied with the TV/DVD.

Insert the stand into the openings on the bottom of the

TV/DVD.

Short screws (X4)

Long screws (X4)

(used in step 2)

(used in step 3)

Insert and tighten the 4 screws into the 4 holes on the

rear of the TV/DVD.

Hex key

Screw

Remove the covering sheet of the stand.

Attach the base to the post.

Attach the base to the 4 screws into the 4 holes on the

bottom of the base.

Hex key

Screw

Soft cushion

(Illustration is LC-26DV27UT.)

For protection, sheets

are covering the product.

Please remove these

sheets before use.

NOTE

• To detach the stand, perform the step in reverse order.

Ventilation & Cleaning Tips

Keep your TV/DVD in a well ventilated area and make sure not to place it by a heat source or use near

water. The TV/DVD is designed for AC use only and should be used with supplied AC cord.

Clean the screen by spraying a soft lint free cloth with water to lightly moisten.

Gently wipe and avoid pressing on the screen. To clean the outer cabinet, use the same method.

Do not use liquid or aerosol cleaners.

The screen is glass and can be scratched or broken when dropped or impacted.

Download from Www.Somanuals.com. All Manuals Search And Download.

QUICK REFERENCE

QUICK INSTALLATION TIPS

Attach your antenna to the back of the TV/DVD.

How to turn on the TV/DVD for the first time.

(See page 14.)

A) Press POWER on TV/DVD.

Connect the AC plug for the TV/DVD into the wall outlet.

(Illustration is LC-26DV27UT.)

AC outlet

• Place the TV/DVD close to the AC outlet, and keep the

power plug within reach.

POWER

NOTE

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH UN-INSULATED PARTS OF ANY CABLES

WITH THE AC CORD CONNECTED.

(Illustration is LC-26DV27UT.)

Secure cables and cords with the supplied cable tie so

that they do not get caught when mounting the cover.

B) POWER indicator on the front of the TV/DVD lights

GREEN.

(Illustration is LC-26DV27UT.)

POWER indicator

Cable tie

NOTE

• Speaker cannot be detached from the TV/DVD.

• TV/DVD angle cannot be adjusted.

Download from Www.Somanuals.com. All Manuals Search And Download.

QUICK REFERENCE

If the remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit.

1 Open the battery cover.

2 Insert two “AA” size batteries

3 Close the battery cover.

(supplied with the product).

• Place the batteries with their terminals

corresponding to the (+) and (–)

indications in the battery compartment.

NOTE

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical

leakage in old batteries.

• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can

cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

17” (5 m)

(Illustration is LC-26DV27UT.)

Remote control

sensor

30°

IMPORTANT:

The POWER indicator on the television should light GREEN indicating you have power to the TV/DVD.

If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the

power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE

INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

IMPORTANT INFORMATION................................... 1

DEAR SHARP CUSTOMER ..................................... 3

IMPORTANT SAFETY INSTRUCTIONS.................. 3

Disc........................................................................... 6

Discs which can be played back ......................... 6

Discs which cannot be played back .................... 6

Title/Chapter/Track.............................................. 6

Handling discs..................................................... 7

Supplied accessories ............................................. 8

QUICK REFERENCE................................................ 8

Attaching the stand.............................................. 8

Contents................................................................. 11

Part names............................................................. 12

TV/DVD (Front).................................................. 12

TV/DVD (Left).................................................... 12

TV/DVD (Rear) .................................................. 12

Remote control unit............................................ 13

Preparation ............................................................ 14

Using the remote control unit............................. 14

Cautions regarding remote control unit.............. 14

Antennas ........................................................... 14

Using external equipment .................................... 15

Displaying an external equipment image ........... 15

Connecting to External Equipment .................... 15

Watching TV........................................................... 16

Preparation........................................................ 16

Turning on the power......................................... 16

Auto Setup......................................................... 16

Select the TV mode ........................................... 16

Turning off the power......................................... 16

Changing channels............................................ 16

Auto Ch Memory................................................ 17

Skipping stored channel .................................... 17

Clear All............................................................. 17

Display the channel information......................... 17

Setting MTS/SAP stereo mode.......................... 17

Selecting the digital audio language .................. 18

View mode for 4:3 programs.............................. 18

View mode for HD programs.............................. 18

Labeling channels.............................................. 18

Closed captions and digital closed captions...... 19

Caption setup .................................................... 20

Password setting for parental control................. 20

How to enter the Lock menu.............................. 20

To clear the all V-Chip settings .......................... 20

Parental control (V-CHIP) .................................. 21

TV Parental Guidelines (TV Guidelines) ........... 21

Voluntary movie rating system (MPAA) ............. 21

Canadian rating systems ................................... 22

Canadian English ratings................................... 22

Canadian French ratings ................................... 22

How to temporarily release the V-Chip block..... 22

Other convenience functions............................... 23

Menu operation buttons..................................... 23

Quick guide for MENU operation ....................... 23

Connecting a PC (Personal computer) ............... 25

Viewing an image from a PC.............................. 25

Displaying an image from a PC.......................... 25

PC compatibility chart........................................ 25

Watching the DVD ................................................. 26

Preparation........................................................ 26

Turning on the power......................................... 26

Select the DVD mode ........................................ 26

Turning off the power......................................... 26

Playback procedure........................................... 26

Status display of DVD disc................................. 26

Special playback ............................................... 27

Zooming ............................................................ 27

Locating desired scene...................................... 27

Repeat playback................................................ 27

A-B Repeat playback......................................... 27

Marking desired scenes..................................... 28

Changing angles................................................ 28

Changing soundtrack language......................... 28

Subtitles............................................................. 28

MP3/WMA/JPEG and Audio CD operation.......... 29

MP3/WMA/JPEG CD information ...................... 29

Loading CD........................................................ 30

MP3/WMA and Audio CD playback................... 30

Select Files........................................................ 30

JPEG playback.................................................. 30

Slide show playback.......................................... 30

Repeat playback (CD) ....................................... 31

Random playback (CD) ..................................... 31

Program playback (CD) ..................................... 31

Function setup....................................................... 31

Basic operation buttons..................................... 31

Quick guide for DVD MENU operation............... 31

Parental control setting...................................... 33

Set the new password ....................................... 33

Temporary disabling of rating level by DVD disc 33

Appendix................................................................ 34

Language code list ............................................ 34

Troubleshooting................................................. 35

Troubleshooting-Digital broadcasting................ 35

Troubleshooting-PC mode................................. 35

Troubleshooting-DVD........................................ 36

Specifications .................................................... 37

Calling for Service................................................. 38

LIMITED WARRANTY ............................................ 38

Dimensional Drawings

• The dimensional drawings for the TV/DVD set are

shown on the inside back cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

Part names

TV/DVD (Front)

NOTE

• The buttons on the main unit have

the same functions as the same

buttons on the remote control.

Fundamentally, this operation

manual provides a description

based on operation using the remote

control.

POWER indicator

(LC-26DV27UT)

Remote control sensor

(LC-32DV27UT)

TV/DVD (Left)

Disc slot

EJECT button

Disc slot

Volume (VOL+/–)/◀/▶buttons

Channel /▲/▶PLAY button

Channel /▼/<STOP button

MENU button

INPUT/ENTER button

POWER button

(LC-26DV27UT)

(LC-32DV27UT)

TV/DVD (Rear)

(LC-26DV27UT)

(LC-32DV27UT)

INPUT 6 terminals

OUTPUT terminals

INPUT 2/3 terminals

ANT./CABLE in

INPUT 1 terminals

AC INPUT

INPUT 4 terminal

INPUT 5 terminal

NOTE

• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.

• The examples used throughout this manual are based on the LC-26DV27UT model.

Download from Www.Somanuals.com. All Manuals Search And Download.

Part names

REV : Review playback. (See page 27.)

Remote control unit

SKIP 9/:: Skip chapter to reverse or forward direction.

(See page 27.)

STILL/PAUSE: Still picture of DVD / Pause CD sound.

14 15 16

(See page 27.)

SETUP/TV MENU: TV mode - Display menu of TV /

DVD mode - Call up initial setup mode. (See pages 23,

31.)

▲/▼/◀/▶/ENTER: Select a desired item on the screen.

SLOW

: Reverse/Forward -slow motion. (See

page 27.)

EXIT/CANCEL: Turn off the menu screen / Reset

information in the menu.

10 PLAY MODE: Select playback mode. (See page 27.)

11 AUDIO: Switch the sound of TV / Change sound track

language. (See pages 18, 28.)

12 RETURN: Turn off the DVD setup menu screen.

13 A-B REPEAT: Repeat playback between A and B. (See

page 27.)

14 DISPLAY: Display the current channel (or input source)

information on the screen. (See page 17.)

15 TV/DVD: Switch between TV/AV and DVD. (See pages

16, 26.)

16 EJECT: Eject the disc. (See page 26.)

17 SLEEP: Allows you to set a time when the TV/DVD

automatically switches to standby. Each time you press

this button, the remaining time setting switches by 10

minutes up to 2 hours. This display will disappear after

a few seconds, and the sleep timer automatically starts

counting down.

• If you want to adjust the sleep timer again, you can

press this button repeatedly then change the time

setting.

• Select “Off” by pressing SLEEP repeatedly to cancel

the sleep timer.

• The TV/DVD will enter the standby mode when the

remaining time reaches zero.

18 INPUT: Select input source. (See page 15.)

19 VIEW MODE: Select the screen size. (See page 18.)

NOTE

20 VOL +/–: Set the volume.

• When using the remote control unit, point it at the TV/DVD.

(See page 10.)

• To increase the volume, press VOL+.

• To decrease the volume, press VOL–.

• VOL+/– on the TV/DVD operates the same as VOL+/–

on the remote control unit.

There is a protective film covering the face of the remote

control. Please remove this film before use.

21 CH

: Select the channel. (See page 16.)

22 MUTE: Mute the sound. “Mute” will be displayed on the

screen, and the sound is silenced. The muting feature

can be released by pressing this button again or one of

VOL +/–.

• Sound via the COAXIAL DIGITAL AUDIO OUTPUT

terminal is not muted.

23 FWD: Fast forward playback. (See page 27.)

24 PLAY: Playback. (See page 26.)

25 STOP: Stop. (See page 26.)

26 DVD MENU: Display DVD menu.

• Press ▲/▼/◀/▶ to select desired title.

27 TOP MENU: Display title menu.

• Press ▲/▼/◀/▶ to select desired title.

28 ANGLE: Change playback channel. (See page 28.)

29 ZOOM: Zoom. (See page 27.)

POWER: Switch the power on or enters standby mode.

30 DIRECT SKIP: Locating desired scene of DVD. (See

(See page 16.)

page 27.)

0–9: Set the channel. (See page 16.)

31 MARKER: Index (DVD). (See page 28.)

• (DOT) / SUBTITLE: To select 4-digit channel number.

(See page 16.) / Set subtitle. (See page 28.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparation

Using the remote control unit

Use the remote control unit by pointing it towards the remote control sensor on

the TV/DVD. Objects between the remote control unit and the remote control

sensor may prevent proper operation.

Cautions regarding remote control unit

• Do not expose the remote control unit to shock.

In addition, do not expose the remote control unit to liquids, and do not place in an area

with high humidity.

• Do not install or place the remote control unit under direct sunlight. The heat may cause

deformation of the remote control unit.

• The remote control unit may not work properly if the remote control sensor on the TV/DVD

is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or

the TV/DVD, or operate the remote control unit closer to the remote control sensor.

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of

connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an

F-type connector, plug it into the antenna terminal at the rear of the TV set.

1. A 75-ohm system is generally a round cable with F-type

connector that can easily be attached to a terminal

without tools (Commercially available).

F-type connector should be

fingertightened only.

NOTICE

When connecting the RF cable to the TV set, do not tighten

F-type connector

F-type connector with tools.

If tools are used, it may cause damage to your TV set. (The

breaking of internal circuit, etc.)

75-ohm coaxial cable (round)

2. A 300-ohm system is a flat “twin-lead” cable that can be

attached to a 75-ohm terminal through a 300/75-ohm

adapter (Commercially available).

F-type connector

300-ohm twin-lead cable (flat)

75-ohm coaxial cable

Connecting Antenna Cable

Home Antenna

• Connect the antenna cable to the

TV using one of the methods in the

terminal (75-ohm)

①

Cable without a

CATV converter

Cable TV lead-In

① ② ③

④

or ).

illustration as shown (

Coaxial cable

(commercially available)

(Illustration is LC-26DV27UT.)

②

VHF/UHF antenna

Home Antenna

terminal (75-ohm)

75-ohm coaxial cable (round)

Coaxial cable

(commercially available)

③

Combination VHF/

UHF antenna

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

UHF

300/75-ohm adapter

VHF

(commercially available)

ANTENNA ANTENNA

④

Separate VHF/

UHF antenna

300-ohm

twin-lead cable

300-ohm twin-lead cable

75-ohm coaxial cable

Combiner

(commercially

available)

IN OUT

To TV antenna terminal

Download from Www.Somanuals.com. All Manuals Search And Download.

Using external equipment

You can connect many types of external equipment to your TV/DVD like a DVD player, VCR, Digital TV tuner,

HDMI equipment, game console or camcorder.

Displaying an external equipment image

To view external source images, select the input

source from “Source Selection” menu using 0–7 on

the remote control.

Source Selection

0.TV

1.Input1

2.Input2

3.Input3

4.Input4

5.Input5

6.Input6

7.DVD

[0-7]:Select

• Each time INPUT is pressed, “Source Selection” item

toggles.

• You can also select “Source Selection” item by pressing

▲/▼.

CAUTION

• To protect equipment, always turn off the TV before

connecting a DVD player, VCR, Digital TV tuner, HDMI

equipment, game console, camcorder or other external

equipment.

NOTE

• Please read the relevant operation manual (DVD player,

etc.) carefully before making connections.

(Illustration is LC-26DV27UT.)

• Refer to your external equipment operation manual for the

signal type.

Connecting to External Equipment

Connecting a DVD player, VCR, Digital TV tuner, HDMI equipment game console or camcorder.

Terminal on external

Terminal on the TV/DVD

INPUT 1 or 2

Cable

equipment

AV cable (commercially available)

VIDEO

AUDIO

INPUT 3

Component video cable

(commercially available)

COMPONENT

AUDIO

Audio cable

(commercially available)

S-VIDEO cable

INPUT 1

(commercially available)

Audio cable

S-VIDEO

AUDIO

(commercially available)

INPUT 4 or 5

HDMI-certified cable

(commercially available)

HDMI

DIGITAL AUDIO

COAXIAL

Coaxial cable

(commercially available)

OUTPUT

AUDIO OUTPUT

Audio cable

(commercially available)

AUDIO

NOTE

• The S-VIDEO terminal takes priority over the video terminals.

• When connecting an HDMI-DVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

• When using an HDMI-DVI conversion adapter/cable, use INPUT 4 and AUDIO terminal.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Select the TV mode

Press TV/DVD to select the TV mode.

Preparation

Perform the following steps before you press POWER

on the remote control unit.

Turning off the power

Insert the batteries into the remote control unit.

(See page 10.)

Press POWER on the TV/DVD, or POWER on the

Connect the antenna cable to the TV/DVD. (See

page 14.)

Plug in the AC cord to the AC outlet. (See page 9.)

remote control.

• The TV/DVD enters standby mode and the image on the

screen disappears.

• The POWER indicator on the TV/DVD changes to Red.

NOTE

Turning on the power

• If you are not going to use this TV/DVD for a long period of

time, be sure to remove the AC cord from the power outlet.

• Weak electric power is still consumed even when POWER

is turned off.

Press POWER on the TV/DVD, or POWER on the

remote control.

TV status indicator (POWER)

Changing channels

You can change channels in several ways.

Method 1

Lighting (Green)

Lighting (Red)

OFF/Standby

• POWER indicator (Green): The TV/DVD is on. (“Please

wait” will appear for a few seconds on the screen.)

Using CH

on the remote control unit or on the

TV/DVD.

NOTE

Auto Setup

• If your cable-TV system includes analog and digital

channels using the same channel number, your channel

up function will scroll through the analog channel first,

then the digital channel. Although it may appear as though

the channel does not change, it actually moves from the

analog to the digital channel in sequence.

The Auto Setup menu appears the first time you turn

on the TV/DVD, and assists you to select the menu

language, specify the Air/Cable setting, and program

your channels automatically.

IMPORTANT: Make sure that the antenna or cable TV

If you use channel-down, it will move in reverse, from the

digital channel to the analog channel.

system connection is made!

The turn on the TV/DVD, press POWER (POWER

indicator on the front of the unit changes green. It may

take approx. 10 seconds for a picture to appear on

screen.).

Method 2

Using remote control buttons 0–9, • (DOT) to select

channels for VHF/UHF/CATV/DIGITAL.

The “Auto Setup” function begins. Press ◀/▶ to select

To select a 1 or 2-digit channel number (e. g., Channel 5):

your desired language.

Press 5

Press ▲/▼ to select “Signal Type”, then press ◀/▶ to

select “Cable” or “Air”.

NOTE

Air

VHF/UHF channels

• When selecting a 1-digit channel number, it is not

necessary to press 0 before the number.

Cable CABLE TV channels

• When you enter 0–9 only, channel selection will be made

if there is no operation within a few seconds.

Press ▲/▼ to select “Automatic Search”, then press

ENTER.

The TV will begin memorizing all the channels available

in your area.

To select a 3-digit channel number (e. g., Channel 115):

Press 1g1g5

• It may take from 15 minutes to 30 minutes to complete

memorizing digital cable channels.

Depending on the reception condition, a BAR display

may not advance for several minutes, please be

patient.

To select a 4-digit channel number (e. g., Channel 22.1):

Press 2g2g • (DOT) g1

NOTE

• When you enter 0–9 only, channel selection will be made

if there is no operation within a few seconds.

• If you press 0 by itself in “Air” reception, nothing will

happen.

• If you press EXIT in the process of “Auto Setup”, the Auto

Setup stops and changes to the normal screen.

• When you make a menu selection, your changes occur

immediately.You do not have to press EXIT to see your

changes.

• Complete the above steps within a few seconds.

• When you enter 0–9 and • (DOT), channel selection will

be made if there is no operation within a few seconds.

• When you are finished programming the menus, press

EXIT.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Auto Ch Memory

Display the channel information

Auto Ch Memory makes the TV/DVD look for all

Press DISPLAY to display the current channel (or

channels viewable in the set area.

input source) information on the screen.

When the TV receives a digital signal, the digital information

will appear for a few seconds.

Press TV MENU and the MENU screen displays.

Press ▲/▼ to select “Channel”, then press ▶ or ENTER.

Press ▲/▼ to select “Auto Ch Memory”, then press ▶ or

ENTER.

• Channel number

• Station name

• Channel label (if preset) • Broadcast program name

• V-Chip rating

• Sleep timer

• Program guide

• Resolution

• Signal type

• Audio language

• Picture size

Press ▲/▼ to select “Signal Type”, then press ◀/▶ to

select “Cable” or “Air”.

Press ▲/▼ to select “Automatic Search”, then press

When the TV receives a analog signal, the analog

information will appear.

ENTER.

The TV will begin memorizing all the channels available

in your area.

• Channel number • Channel label (if preset)

• V-Chip rating

• Sleep timer

• Picture size

• Signal type

• It may take from 15 minutes to 30 minutes to complete

memorizing digital cable channels.

Depending on the reception condition, a BAR display

may not advance for several minutes, please be

patient.

•

Audio information (Stereo, SAP or Mono)

• Resolution

Setting MTS/SAP stereo mode

NOTE

The TV/DVD has a feature that allows reception of

sound other than the main audio for the program.

This feature is called Multi-channel Television Sound

(MTS). The TV/DVD with MTS can receive mono

sound, stereo sound and Secondary Audio Programs

(SAP). The SAP feature allows a TV/DVD station to

broadcast other information, which could be audio in

another language or something completely different

like weather information.

• Memorizing channels is best accomplished during evening

“PRIMETIME” hours, as more stations are broadcasting

digital signals. Memorizing channels can only be

accomplished while a station is broadcasting a digital

signal to set that channel into memory.

• New digital channels may be added to your area

periodically, it is recommended to perform the “Automatic

Search” procedure regularly.

Skipping stored channel

You can set channel selection disabled using CH

You can enjoy Hi-Fi stereo sound or SAP

broadcasts where available.

Press TV MENU and the MENU screen displays.

Press ▲/▼ to select “Channel”, then press ▶ or ENTER.

• Stereo broadcasts

View programs like live sporting events, shows and

concerts in dynamic stereo sound.

Press ▲/▼ to select “Add/Delete”, then press ▶ or

• SAP broadcasts

ENTER.

Receive TV broadcasts in either MAIN or SAP sound.

MAIN sound: The normal program soundtrack (either in

mono or stereo).

Press ▲/▼ to select “Add/Delete”, then press ▶ or

ENTER.

SAP sound: Listen to a second language, supplementary

commentary or other information. (SAP is mono sound.)

Press ▲/▼ to select the channel that you want to skip.

Press ◀/▶ to select “Delete” for selected channel.

Press EXIT to return to the normal screen.

If stereo sound is difficult to hear.

• Obtain a clearer sound by manually switching to fixed

mono-sound mode.

NOTE

• To add a digital channel you are watching:

NOTE

Select a channel you want to add. Then select “Adding

Channel” in step 4, press ▶ or ENTER.

• To release the skipping channel:

Select “Add” in step 6.

• MTS only operates while in TV mode.

• MTS is available only when receiving analog broadcasting,

not when receiving digital broadcasting.

• When the TV receives a stereo or SAP broadcast, the

word “Stereo” or “SAP” displays on-screen if you press

DISPLAY.

Clear All

All channels are deleted from the channel memory.

Changing MTS

You can change MTS as shown below to match the

television broadcast signal.

Press TV MENU and the MENU screen displays.

Press ▲/▼ to select “Channel”, then press ▶ or ENTER.

In analog TV mode, press AUDIO and the “Audio”

Press ▲/▼ to select “Add/Delete”, then press ▶ or

menu screen displays. “MTS” will be highlighted.

ENTER.

Press AUDIO again or ◀/▶ to select “Stereo”,

Press ▲/▼ to select “Clear All”, then press ▶ or ENTER.

Press EXIT to return to the normal screen.

“SAP” or “Mono”.

Press EXIT to return to the normal screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Selecting the digital audio language

View mode for HD programs

When two or more audio languages are included in a

Stretch mode is available for HD programs.

Suitable for viewing wide-screen 1.78:1 aspect-ratio

programs. When viewing 1.85:1 programs, the stretch

mode will still show very thin black bands at the top

and bottom of the screen.

digital signal, you can select one of the audio languages.

In digital TV mode, press AUDIO and the “Audio

Language” menu screen displays.

Press ▲/▼ or 0-6 to select your desired language.

Press EXIT to return to the normal screen.

Labeling channels

To create channel labels

NOTE

• Digital audio is active only when receiving digital

Select a channel you want to label.

boardcasting, not when receiving analog boardcasting.

Press TV MENU, then press ▲/▼ to select

“Channel”, then press ▶ or ENTER.

View mode for 4:3 programs

Press ▲/▼ to select “Ch Label”, then press ▶ or

ENTER. The Ch Label menu will appear.

Press VIEW MODE.

• The View mode menu displays.

Press ◀/▶ to select a channel you want to label,

• The menu lists the view mode options selectable for

the type of video signal currently being received.

then press ▼.

Ch Label

Press 0–3 to select each view mode directly while

the View mode menu is still on the screen.

• Each time VIEW MODE is pressed, View Mode item

toggles.

Channel Number

15.001

Ch Label

Label Clear

• You can also select View Mode item by pressing ▲/▼.

• You can sequentially select a view mode that has its

own aspect ratio.

: Select

: Adjust

Press ◀/▶ repeatedly until the character you want

• You can select “Dot by Dot” in PC input mode.

appears in the first space.

Side Bar:

The characters rotation as follows:

Suitable for viewing conventional

4:3 programs in their normal

format.

, () @ / + =

SPACE

If the character which you desire appears, press

ENTER. Repeat this step to enter the rest of the

characters.

S.Stretch (Smart stretch):

Suitable for stretching 4:3

programs to fill the screen.

When you finish inputting the label name, press

ENTER.

Zoom:

Press EXIT to return to the normal screen.

Suitable for viewing wide-screen

2.35:1 anamorphic DVDs in full

screen.

Repeat steps 1-5 for other channels. You can

assign a label to each channel.

To erase channel labels

Stretch:

Select a channel with a label which you want to

This mode is useful for 1.78:1 DVDs.

When viewing 1.85:1 DVDs,

stretch mode will still show very

thin black bands at the top and

bottom of the screen.

remove.

Press TV MENU, then press ▲/▼ to select

“Channel”, then press ▶ or ENTER.

Press ▲/▼ to select “Ch Label”, then press ▶ or

Dot by Dot (for PC/HDMI mode

only):

ENTER to display the Ch Label menu.

Press ▲/▼ to select “Label Clear”. Press ▶ or

Detects the resolution of the signal

of the image and it will be shown

on the screen with same amount of

pixels.

ENTER.

Press EXIT to return to the normal screen.

Repeat steps 1-4 to erase other channel labels.

NOTE

•

You can enter to the same menu screen from “Picture” menu.

You cannot select “Side Bar” and “S.Stretch” when a 720p, 1080i

or 1080p signal is being input.

•

Some High Definition and/or Digital broadcasts may not allow you

to change the picture size.

In PC Mode, only the “Side Bar”, “Stretch” and “Dot by Dot”

picture size features are available. In PC Mode (WXGA), only the

“Stretch” and “Dot by Dot” picture size features are available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Tune the TV to the desired program.

Press TV MENU and the MENU screen displays.

Press ▲/▼ to select “Setup”, then press ▶ or ENTER.

Closed captions and digital closed

captions

Press ▲/▼ to select “Closed Caption”, then press

NOTE

▶ or ENTER.

• Closed Caption might not appear according to the

The Closed Caption menu will appear.

condition of the signal from the broadcasting station.

Press ◀ or ▶ to setting the “CC Setting” to “On”.

Your TV/DVD is equipped with an internal Closed

Caption decoder. It allows you to view conversations,

narration and sound effects as subtitles on your

TV/DVD. Closed Captions are available on some TV

programs and on some VHS home video tapes at the

discretion of the program provider.

Press ▲/▼ to select “Analog Caption” or “Digital

Caption”.

When you select “Analog Caption”, you can choose

C1, C2, C3, C4, T1, T2, T3 and T4.

When you select “Digital Caption”, you can choose

from CS1, CS2, CS3, CS4, CS5 and CS6.

Digital Closed Caption service is a new caption

service available only on digital TV programs (also

at the discretion of the service provider). It is a more

flexible system than the original Closed Caption

system, because it allows a variety of caption sizes

and font styles. When the Digital Closed Caption

service is in use, it will be indicated by the appearance

of a 3-letter abbreviation that also indicates the

language of the Digital Closed Captions: ENG

(English), SPA (Spanish), FRA (French) or other

language codes.

Press ◀/▶ to select the desired Closed Caption

mode for both Digital and Analog Caption.

Press ▲/▼ to select “CC Priority”, then press ◀ / ▶

to select “Digital CC” or “Analog CC”.

• Depending on the broadcast signal, some

Analog Captions will function with a Digital

broadcast signal. This step prevent that two kind

of captions are overlapping.

Press EXIT to return to the normal screen.

Not all programs and VHS videotapes offer closed

captions. Please look for the “ ” symbol to ensure

that captions will be shown.

NOTE

• To turn the Closed Caption feature off, setting the “CC

Setting” to “Off”.

In the Closed Caption system, there can be more than

one caption service provided. Each is identified by

its own number. The “C1” and “C2” services display

subtitles of TV programs superimposed over the

program’s picture. Generally, Closed Captions in

English are transmitted on C1 and Closed Captions in

other languages are transmitted on C2.

In the Closed Caption system, the “Text1” or “Text2”

services display text that is unrelated to the program

being viewed (e.g., weather or news). These services

are also superimposed over the program currently

being viewed.

NOTE

• If the program or video you selected is not closed-captioned, no captions will display on-screen.

• If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, setting the “CC

Setting” to “Off”.

• When selecting Closed Captions, the captioning will be delayed approx. 10 seconds.

• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.

• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed

Captioning, especially with live programs. This is because during live programs, captions are also entered live. These

transmissions do not allow time for editing.

• When Captions are being displayed, on-screen displays, such as volume and mute may be seen but may interfere with

Closed Captions.

• Some Cable TV systems and copy protection systems may interfere with the Closed Captioned signal.

• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with

strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.

• When a Digital TV Program has both Digital Closed Caption and Analog Closed Caption signals, Digital Closed Caption is

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Password setting for parental

control

Caption setup

This function allows you to adjust the closed caption

screen appearance to suit your preference.

Allows you to use a password to protect certain

settings from being accidentally changed.

Press TV MENU and the MENU screen displays.

IMPORTANT:

Press ▲/▼ to select “Setup”, then press ▶ or

Three conditions must be met to enable the V-Chip

ENTER.

① Password is registered.

② V-Chip settings have been made.

③ “V-Chip” is set to “On”.

Press ▲/▼ to select “Closed Caption”, then press

▶ or ENTER.

The Closed Caption menu displays.

Press ▲/▼ to select “Digital CC Preset”, then press

◀/▶ to select “Custom”.

Setting a password

Press ▲/▼ to select “CC Advanced”, then press ▶

Press TV MENU and the MENU screen displays.

or ENTER.

Press ▲/▼ to select “Lock”, then press ▶ or

Press ▲/▼ to select the desired item, then press

ENTER.

◀/▶ to change the setting.

Select and enter a password (4 digits) using the

number buttons (0–9), then press ENTER.

• “ ” appears instead of the number.

Press EXIT to return to the normal screen.

Selectable parameters available in each

adjustment item.

Enter the same password again to confirm, then

press ENTER, the password is now registered and

the Lock menu will appear on the screen.

Item

Selectable parameter

Text Size:

Text Type:

Auto, Small, Standard, Large

Changing the password

Allows you to change your current password.

Auto, Style1, Style2, Style3, Style4, Style5,

Style6, Style7

Repeat steps 1 to 3 in Setting a password.

Text Edge: Auto, None, Raised, Depressed, Uniform,

Press ▲/▼ to select “Change Password”, then

Left Shadow, Right Shadow

press ▶ or ENTER.

Enter a new password using 0–9, then press

Text Color: Auto, Black, White, Red, Green, Blue,

ENTER.

Yellow, Magenta, Cyan

Enter the same password again to confirm, then

Text

Auto, Solid, Transparent, Translucent,

Flashing

press ENTER.

Opacity:

The screen returns to Lock menu. Your new

Background Auto, Black, White, Red, Green, Blue,

Color: Yellow, Magenta, Cyan

password has been set.

Background Auto, Solid, Transparent, Translucent,

NOTE

Opacity:

Flashing

• As a precautionary measure, make a note of your

password and keep it in a familiar place.

• The “V-Chip Set (DTV)” will only be selectable when

a new rating system can be downloaded via digital

broadcasting in the U.S.

NOTE

• This feature is designed to customize Digital Captions

only.

• The “Auto” value depends on the broadcasting station.

How to enter the Lock menu

Press TV MENU and the MENU screen displays.

Press ▲/▼ to select “Lock”, then press ▶ or

ENTER.

Input the 4-digit password by using 0–9, then press

ENTER.

The Lock menu displays.

To clear the all V-Chip settings

In the Lock menu, press ▲/▼ to select “V-Chip

Clear”, then press ▶ or ENTER.

Input the 4-digit password by using 0–9, then press

ENTER. All your settings return to the factory

settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Parental control (V-CHIP)

V-CHIP might not function according to the condition of the signal from the broadcasting station.

V-CHIP is an electronic filtering device built into your TV/DVD. This tool gives parents a great degree of control

over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing

while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your

TV/DVD.

V-CHIP menu will not be selectable from the menu if you do not first configure your password.

(See page 20 for password setting for parental control.)

• The U.S. has two rating systems for viewing content: movie ratings and TV Parental Guidelines.

• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate television shows

from their children.

• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as watched on cable

TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.

TV Parental Guidelines

Content

FANTASY

VIOLENCE

SEXUAL

ADULT

SEXUAL

DIALOG

TV RATING

VIOLENCE

SITUATIONS

LANGUAGE

TV-Y (All children)

TV-Y7 (Directed to older children)

TV-G (General audience)

TV-PG (Parental Guidance suggested)

TV-14 (Parents strongly cautioned)

TV-MA (Mature audience only)

Suggested

age

S: The content rating can be set, but this rating is not normally broadcast by TV stations.

X: Content rating can be set.

EXAMPLE

• If you select “TV-G”, this will automatically block the higher ratings “TV-PG”, “TV-14” and “TV-MA”.

Voluntary movie rating system (MPAA)

MOVIE RATING

Description

General audiences. All ages admitted.

PG-13

Parental guidance suggested. Some material may not be suitable for children.

Parents strongly cautioned. Some material may be inappropriate for children under 13.

Age

Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions).

No one 17 and under admitted.

X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.

NC-17

EXAMPLE

• If you select “PG-13”, this will automatically block the higher ratings “R”, “NC-17” and “X”.

NOTE

• Voluntary movie rating system only uses an age-based rating.

TV Parental Guidelines

(TV Guidelines)

Voluntary movie rating system

(MPAA)

In Lock menu, press ▲/▼ to select “V-Chip”, then

Repeat steps 1 and 2 in TV parental Guidelines

press ◀/▶ to select “On” .

(TV Guidelines).

Press ▲/▼ to select “V-Chip Set”, then press ▶ or

Press ▲/▼ to select “Movie Rating”, then press ▶

ENTER.

or ENTER.

Press ▲/▼ to select “TV Rating”, then press ▶ or

Press ▲/▼ to select the desired rating, then press

ENTER.

Press ▲/▼/◀/▶ to select the desired rating, then

Press EXIT to return to the normal screen.

press ENTER.

Press EXIT to return to the normal screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Canadian rating systems

• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission

(CRTC) policy on violence in television programming.

• While violence is the most important content element to be rated, the structure developed takes into consideration other

program content like language, nudity, sexuality and mature themes.

• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian

French ratings.

Canadian English ratings

Rating

Description

Exempt: Includes news, sports, documentaries and other information programming; talk shows, music

videos, and variety programming.

Children: Intended for younger children under the age of 8 years. Pays careful attention to themes that

could threaten their sense of security and well-being.

Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only way to resolve

C8+

conflict; nor encourage children to imitate dangerous acts which they may see on the screen.

General: Considered acceptable for all age groups. Appropriate viewing for the entire family, contains very

little violence, physical, verbal or emotional.

Age

Parental Guidance: Intended for a general audience, but may not be suitable for younger children (under

the age of 8) because it could contain controversial themes or issues.

Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline, but

it must be integral to the development of plot or character. Language usage could be profane and nudity

present within the context of the theme.

Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while

related to the development of plot, character or themes, are intended for adult viewing.

Could contain graphic language and portrayals of sex and nudity.

14+

18+

Example: If you select “G”, this will automatically block the higher ratings “PG”, “14+” and “18+”.

Canadian French ratings

Rating

Description

Exempt programming.

General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a

humorous or unrealistic manner.

General but inadvisable for young children: May be viewed by a wide public audience, but could contain

8 ans+ scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations.

Age

Recommended for viewing with parent.

Over 13 years: Could contain scenes of frequent violent scenes and therefore recommended for viewing

13 ans+

with parent.

16 ans+ Over 16 years: Could contain frequent violent scenes and intense violence.

18 ans+ Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.

Example: If you select “8 ans+”, this will automatically block the higher ratings “13 ans+”, “16 ans+” and “18 ans+”.

How to temporarily release the

V-Chip block

Canadian English ratings

Repeat steps 1 and 2 in TV parental Guidelines

The V-Chip block is working and censors a broadcast,

(TV Guidelines).

“This program has been blocked!” displays.

Select “CAN ENG Rating”, then press ▶ or ENTER.

Press ▲/▼ to select E, C, C8+, G, PG, 14+ or 18+,

then press ENTER.

Press MUTE while the V-Chip is working and then

the password entering menu displays.

Enter your 4-digit password with 0–9, then press

Press EXIT to return to the normal screen.

ENTER.

At this time V-Chip block temporarily releases.

Canadian French ratings

Reactivating the temporarily released V-Chip block

Method 1: Change to the other channel.

Repeat steps 1 and 2 in TV parental Guidelines

Method 2: Switch off the TV power.

(TV Guidelines).

NOTE

Select “CAN FRE Rating”, then press ▶ or ENTER.

Press ▲/▼ to select E ,G, 8 ans+, 13 ans+, 16 ans+

or 18 ans+, then press ENTER.

• Performing any of the two above will activate the V-Chip

block.

Press EXIT to return to the normal screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Other convenience functions

Menu operation buttons

Quick guide for MENU operation

Use the following buttons on the remote control to

example : Select Language

operate the menu.

Press TV MENU and the MENU screen displays.

Main Menu

Picture

Audio

Channel

Lock

Setup

ENTER : Set

: Select

Press ▲/▼ to select “Setup”, then press ▶ or

ENTER.

Press ▲/▼ to select “Language”.

Setup

Closed Caption

Language

English

Video Label

Auto Shut Off

Reset

Off

: Select

: Adjust

Press ◀/▶ to select the desired language.

...on the following pages the MENU can be called

in the same way as here.

Press EXIT to return to the normal screen.

NOTE

• Some menu items may not displayed depending on the

selected input source.

• If no buttons are pressed for more than approx. 60

seconds, the menu screen will return to normal Monitor

screen automatically.

TV MENU: Press to open the menu screen.

▲/▼/◀/▶: Press to select a desired item on the

screen or adjust a selected item.

ENTER: Press to go to the next step or complete

the setting.

RETURN: Press to return to the previous step.

EXIT:

Press to exit from the menu screen.

All changed settings will be saved.

: Adjust

: Select

ENTER : Set

The lower part of the menu screen is an

operational guide for the remote control.

It will change in accordance with each menu

setting screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Other convenience functions

Icon

Picture

Selected item

Picture Setting

Description

Brightness / Contrast /

Sharpness / Color / Tint

You can adjust the picture quality to your preference.

Color Temperature

Backlight

Sports

Bluish (Cool) / Neutral (Standard) / Reddish (Warm)

Backlight adjusts the screen brightness for improved picture clarity.

AV Mode

For a clear-cut image emphasizing high contrast, useful for sports

viewing.

Standard

Movie

For a highly defined image in a normal lighting.

For a movie.

Memory

Allows the user to customize settings as desired.You can set the

mode for each input source.

View Mode

Film Mode

See page 18.

On / Off

A smoother motion may be obtained by setting the Film Mode to

“On” when you view a DVD from the DVD player.

PC Setting*

Hor Position / Ver Position

To adjust the horizontal / vertical position of the image on the PC

Monitor screen. Each video standard will require a different value

for this setting.

(see page 25)

Clock

Phase

To minimize any vertical bars or stripes visible on the screen background.

This must be adjusted after the frequency has been set optimize

picture quality.

Auto Adjust

On / Off

To adjust the all PC settings automatically.

DNR

DNR (Digital Noise Reduction) can reduce the roughness of the

picture.

Audio

Bass / Treble / Balance

MTS

Surround

You can adjust the sound quality to your preference.

See page 17.

Stereo / SAP / Mono

On/Off

The dynamic presence and sound created offers a thoroughly

enjoyable listening experience.

Audio Language

HDMI1 Audio

When two or more audio languages are included in a digital

signal, you can select one of the audio languages.

When you connect the HDMI device to the TV, select this setting.

HDMI

DVI

When you connect the DVI device to the TV with analog audio

cords, select this setting.

Speakers

Off

• Sound via speaker and AUDIO OUTPUT terminal are adjusted

with VOL +/– on the remote control unit or VOL +/– on the TV.

• Sound via the AUDIO OUTPUT terminal is adjusted with VOL

+/– on the remote control unit or VOL +/– on the TV.

• Sound via speaker is muted.

Channel Add/Delete

DTV Signal

Adding Channel / Add/

Delete / Clear All

See page 17.

Select “DTV Signal”, then press ▶ or ENTER. The Digital-Signal

strength screen will appear.

If necessary, adjust the direction of the antenna to obtain the

maximum signal strength.

Auto Ch Memory

Signal Type / Automatic

See page 17.

Ch Label

Channel Number / Ch Label See page 18.

/ Label Clear

Lock

See pages 20~22.

Setup

Closed Caption

Language

See page 19.

English / Français / Español You can choose from three different languages (English, French

and Spanish) for the on-screen displays.

Video Label

Let you set the input terminal displayed when using the “Source

Selection” menu or channel display.

Press ▲/▼ to select the specific input source which you want to change.

Press ◀/▶ to select the new label for the selected input source.

Auto Shut Off

On / Off

In case of “Auto Shut Off” feature is “On”, if a station being viewed

stops broadcasting, the TV will automatically shut itself off after

15 minutes.

• If Auto Shut Off is “On” and the broadcast signal is weak, the

TV may automatically shut itself off. If this happens, turn Auto

Shut Off to “Off”.

Reset

The Reset function returns your settings to the factory settings.

NOTE

* “PC Setting” is available only for PC INPUT (INPUT 6).

* When you connect the PC via HDMI input, you can setting “Hor Position” and “Ver Position” only.

* Whenever you change the PC display resolution settings and find that the characters of the PC input has rough edges or

has some flickerings, please go to PC Setting and do an “Auto Adjust” to improve the display of the PC input.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting a PC (Personal computer)

Viewing an image from a PC

Use the INPUT 6 (PC) terminals to connect a PC. (When you use HDMI cable, use the INPUT 4 (HDMI 1) terminal.)

NOTE

• The PC input terminals are DDC1/2B-compatible.

• Refer to “PC compatibility chart” for a list of PC signals compatible with the System.

• Make sure to select the same signal values for the output signal of a PC and the input signal of the TV/DVD set before

connecting with the PC. (See page 24.)

• Depending on the PC being used, images may not be shown without converting the output signals into external output.

Please refer to your PC’s manuals regarding converting to external output.

• You can also connect the PC with HDMI cable. If you use HDMI cable, you

(Illustration is LC-26DV27UT.)

don’t have to connect the audio cord. If you use HDMI-to-DVI cable, please

connect audio cord as same way as VGA cable.

Connecting the RGB cable

•

Connect the RGB cable making sure

that it ﬁts correctly into the terminal.

Then, ﬁrmly secure the connectors by

tightening the screws on both sides

of the plug.

To PC IN

terminal

To ANALOG RGB

output terminal

RGB cable

(commercially available)

∅3.5 mm stereo minijack cable

(commercially available)

To Audio output

terminals

To AUDIO PC/HDMI

input terminal

Signal names for 15-pin mini D-sub connecter

PC compatibility chart

Horizontal

Frequency

Vertical

VESA

Resolution

720 x 400

Frequency

Standard

31.5 kHz

37.9 kHz

37.5 kHz

35.1 kHz

37.9 kHz

48.1 kHz

46.9 kHz

48.4 kHz

56.5 kHz

60.0 kHz

47.8 kHz

47.7 kHz

70 Hz

60 Hz

72 Hz

75 Hz

56 Hz

60 Hz

72 Hz

75 Hz

60 Hz

70 Hz

75 Hz

60 Hz

○

VGA

Pin No.

Signal name

Pin No.

Signal name

D-SUB_5

640 x 480

800 x 600

1,024 x 768

①

⑨

②

③

④

⑤

⑥

⑦

⑧

⑩

⑪

⑫

⑬

⑭

⑮

DGND (Ground)

Not connected

SVGA

Not connected

DGND (Ground)

AGND (Ground)

DDCD

VGAHS

VGAVS

DDCC

XGA

1,280 x 768

1,360 x 768

WXGA

Displaying an image from a PC

To view an image from a PC, perform the following

procedure.

①

Select the Input 6 (PC) mode using INPUT on the remote

control or the TV/DVD set. (See page 15.)

②

③

Select the PC input signal.

Adjust the “Picture” items if the PC image does not come

in clearly. (See page 24.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching the DVD

Preparation

On the screen, “ ” changes to “Reading” and then

playback will commence.

• A menu screen appear on the TV screen, if the disc

has a menu feature. In this case, press ▲/▼/◀/▶ or

ENTER to operate a menu feature.

Perform the following steps before you press POWER

on the remote control unit.

Insert the batteries into the remote control unit.

Press STOP to end playback.

(See page 10.)

• The unit memorizes the stopped point, depending on

the disc. “ ” appears on the screen. Press PLAY to

resume playback (from the scene point).

• If you press STOP again (“■” appears on the screen)

or unload the disc, the TV/DVD will clear the stopped

point.

Plug in the AC cord to the AC outlet. (See page 9.)

Turning on the power

Press POWER on the TV/DVD, or POWER on the

remote control.

Press EJECT.

• POWER indicator (Green): The TV/DVD is on.

(“Please wait” will appear for a few seconds on the

screen.)

Remove the disc and then press POWER.

The TV/DVD turns off.

• When you eject the disc, you may hear mechanism

noise, but it is not malfunction.

Select the DVD mode

Press TV/DVD to select the DVD mode.

Status display of DVD disc

Turning off the power

Press DISPLAY. The status display of the disc will

appear on the screen in order like the figure below.

Press POWER on the TV/DVD, or POWER on the

remote control.

ELAPSED

TIME

TOTAL

TIME

• The TV/DVD enters standby mode and the image on the

screen disappears.

DISC OPERATION

• The POWER indicator on the TV/DVD changes to Red.

NOTE

TITLE NO.

DVD

00:15:25 01:41:39

Chapter 2/24

1/2 Eng

CHAPTER

NO.

Title 1/3

• If you are not going to use this TV/DVD for a long period

of time, be sure to remove the AC cord from the power

outlet.

1/1 Eng Dolby Digital

1/1

• Weak electric power is still consumed even when POWER

is turned off.

SUBTITLE LANGUAGE

AUDIO LANGUAGE A KIND OF AUDIO

NOTE

ANGLE NO.

Playback procedure

• If the TV/DVD does not operate properly:

Static electricity, etc., may affect the player’s operation.

Disconnect the AC power cord once, then connect it

again.

Place the disc in the disc slot with the label side

facing forward. (If the disc has a label.) Hold the

disc without touching its surface, align it with the

guides, and place it in position.

• If a disc is inserted during some modes other than DVD

mode, it may switch to DVD mode and then playback may

be begun automatically.

• If a disc is inserted during some modes other than DVD

mode, it may switch to DVD mode and then playback

may be begun automatically.

• About inserting disc:

If the unit is slanted or moved while inserting disc, the disc

may get damage.

NOTE

• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen

according to the type of loaded disc. If these appear, check your disc again (see pages 6 and 33).

• Some discs may take a minute or so to start playback.

• When an 8 cm disc is placed into the disc slot, and the playback picture or menu display does not appear, press PLAY.

• A “Prohibition” symbol “ ” may appear at the upper right of the screen. This symbol means either the feature you tried is

not available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the

TV/DVD.

• When you set a single-faced disc label downwards (i.e. the wrong way up) “Reading” will appear on the display and then

“Incorrect Disc” will be displayed.

• Some playback operations of DVDs may be intentionally fixed by software producers. Since this TV/DVD plays DVDs

according to the disc content recorded, some playback features may not be available. Also refer to the instructions supplied

with the DVDs.

• Do not move the unit during playback. Doing so may damage the disc.

• Use EJECT to unload and eject the disc.

• Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunction.

• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen

menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press

POWER on your remote control once the movie is completed.

• There may be a slight delay between the button is pressed and the function activates.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching the DVD

Special playback

Locating desired scene

Use the title, chapter and time recorded on the disc to

Fast Forward Playback

locate the desired point to play back.

Press FWD during normal playback.

Each press of FWD will increase the speed of the search uu

(x 2), uuu (x 4), uuuu (x 8), uuuuu (x 20).

• To resume normal playback, press PLAY.

• The above figure shown in parentheses indicates the

average speed multiplier.

Press DIRECT SKIP during playback.

Press ▲/▼ to select the “Title”, “Chapter” or “Time”.

Press Number buttons (0–9) to input the number.

• If you input a wrong number, press CANCEL.

• Refer to the package supplied with the disc to check

the numbers.

Review Playback

Press REV during normal playback.

Each press of REV will increase the speed of the search tt

(x 2), ttt (x 4), tttt (x 8), ttttt (x 20).

• To resume normal playback, press PLAY.

• The above figure shown in parentheses indicates the

average speed multiplier.

Press ENTER.

• Playback starts.

• When you change the title, playback starts from

Chapter 1 of the selected title.

• Some discs may not work in the above operation.

Still Playback

Press STILL/PAUSE during normal playback to pause

playback.

Repeat playback

• To resume normal playback, press PLAY.

Frame Advance

Press PLAY MODE during playback or stop mode.

Press STILL/PAUSE during still playback.

One frame is advanced each time you press STILL/PAUSE.

• To resume normal playback, press PLAY.

Press ENTER to select “Chapter” or “Title”.

• The unit automatically starts repeat playback after

finishing the current title or chapter.

Slow-motion Playback

Press SLOW ( ) or SLOW ( ) during normal playback or

still playback.

Press PLAY MODE again to make the screen

disappear.

Each press of SLOW will change the speed of the slow x1/2,

x1/4, x1/6, x1/7.

• If you set the repeat mode during stop mode, press

PLAY to start Repeat playback.

• To resume normal playback, press PLAY.

• To resume the still playback, press STILL/PAUSE.

• To resume normal playback, select Repeat “Off”.

Locating a chapter or track

NOTE

Press SKIP(

) Forward or SKIP(

) Reverse during

• Some discs may not be compatible with the repeat

playback to locate a chapter that you want to watch.

Each time you press the button, a chapter or track is

skipped.

operation.

• Chapter repeat function is canceled whenever SKIP(

)

Forward or SKIP(

) Reverse is pressed.

NOTE

• The TV/DVD is capable of holding a still video image or On

screen display image on your television screen indefinitely.

If you leave the still video image or On screen display image

displayed on your TV for an extended period of time, you

risk permanent damage to your television screen.

A-B Repeat playback

A-B repeat playback allows you to repeat material

between two selected points.

Press A-B REPEAT during playback.

The start point is selected.

Zooming

Press A-B REPEAT again.

This TV/DVD will allow you to zoom in on the frame

image. You can then make selections by switching the

position of the frame.

The end point is selected.

Playback starts at the point that you selected.

Playback stops at the end point, returns to Point A

automatically, then starts again.

Press ZOOM during playback.

The center part of the image will be zoomed in.

• To resume normal playback press A-B REPEAT

Each press of ZOOM will change the ZOOM magnification

again.

1 (x 1.3), 2 (x 1.5) and 3 (x 2.0).

“

Off” appears on the screen.

Press ▲/▼/◀/▶ to view a different part of the frame.

You may move the frame from the center position UP,

NOTE

DOWN, LEFT or RIGHT.

• In A-B Repeat mode, subtitles near the A or B locations

In the zoom mode press ZOOM repeatedly to

may not be displayed.

return to a 1:1 view ( Off).

• You cannot set the A-B Repeat for the scenes that include

multiple angles.

• You may not be able to set A-B Repeat during certain

scenes of the DVD.

NOTE

• You can select the Still Playback or Fast Forward (Review)

• A-B Repeat does not work with an interactive DVD, MP3/

WMA/JPEG-CD.

Playback in the zoom mode.

• Some discs may not respond to zoom feature.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching the DVD

Marking desired scenes

Changing soundtrack language

The TV/DVD stores the points that you want to watch

You can select the language when you play a

again up to 3 points.

multilingual disc.

You can resume playback from each scene.

Press AUDIO during playback.

The current soundtrack language will appear.

Marking the scenes

1/2 Eng Dolby Digital

Press MARKER during playback.

Select the blank Marker using ▲/▼, then press

ENTER at the desired scene.

Press AUDIO repeatedly until the desired language

is selected.

• Up to 3 scenes can be selected.

The on-screen display will disappear after a few

seconds.

• Repeat this procedure to set the other 2 scenes.

Press MARKER to return to the normal screen.

2/2 Fre Dolby Digital

Returning to the scenes

Press MARKER during playback or stop mode.

NOTE

• If the desired language is not heard after pressing AUDIO

several times, the language is not recorded on the disc.

• Changing soundtrack language is cancelled when you

eject the disc.

Press ▲/▼ to select the Marker 1-3.

Press ENTER.

Playback starts from the marked scene.

The initial default language or available language will be

heard if the disc is played back again.

To cancel the Marker

Follow the above steps 1~2, then press CANCEL.

Subtitles

NOTE

• Some discs may not work with the marking operation.

• The marking is cancelled when you eject the disc or turn

the power off.

Changing the subtitle language

You can select the language when playing back a disc

recorded with multilingual subtitles.

• Some subtitles recorded around the marker may fail to

appear.

Press SUBTITLE repeatedly during playback until

your desired language appears.

The on-screen display will disappear after a few

seconds.

Changing angles

1/5 Eng

When playing back a disc recorded with multi-angle

facility, you can change the view angle.

Press ANGLE during playback.

Turning the subtitles on and off

The current angle will appear.

Press SUBTITLE during playback until “Off” appears.

1/2

NOTE

• Changing subtitle language is cancelled when you eject

Press ANGLE repeatedly until the desired angle is

the disc.

selected.

• Some functions may not work on some DVDs. You may

not be able to turn subtitles on or off or change subtitles.

While playing the DVD, the subtitle may change when:

- you eject or insert the disc.

NOTE

• In case of JPEG-playback, the

JPEG-image is rotated

- you change the title.

90 degrees to the right.

• In some cases, the subtitle language is not changed to the

selected one immediately.

• Depending on the DVD, you may not be able to change

the angles even if multi-angles are recorded on the DVD.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3/WMA/JPEG and Audio CD operation

This TV/DVD can playback the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. Audio CD

also can be played back. To produce the MP3/WMA/JPEG-data, you need a Windows-PC with CD-R/RW drive

and a MP3/WMA/JPEG-encoding Software (not supplied).

The Apple-HFS-System cannot be played.

NOTE

This TV/DVD requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.

Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats

(including CD-R containing MP3/WMA files). Given the fact that technology in this area is still maturing, this unit cannot

guarantee that all genre of recordable discs will produce optimal playback quality. The technical criteria set out in this owner’s

manual are meant as a guide only.

Please be advised that you must obtain permission from the applicable copyright owners to download copyrighted content,

including music files, in any format, including the MP3 and WMA formats, prior to the downloading thereof.

MP3/WMA/JPEG CD information

Limitations on MP3/WMA/JPEG CD playback

• MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters,

“mp3”, “wma”, “jpg”.

• MP3/WMA/JPEG CD must be correspond to the ISO standardized files.

• This TV/DVD can read 2000 files per disc. If one disc has more than 2000 files, it reads up to 2000 files, the remaining files

will be omitted.

• MP3/WMA/JPEG CDs cannot be used for the purpose of recording.

• It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.

• Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 15 letters) on the

screen. Long file names will be condensed.

• The music files recorded by “Hierarchical File System” (HFS) cannot be played.

Limitations on display

• The maximum number for display is 15 letters.

Notes on MP3/WMA/JPEG files

To playback MP3/WMA/JPEG CD in the recorded order,

1.Use MP3/WMA/JPEG software that records data alphabetically or numerically.

2.Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”).

3.Refrain from making too many sub-folders.

CAUTION:

• Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.

• The CD-R/RW that has no music data or non MP3/WMA/JPEG files cannot be played back.

Standard, sampling frequency, and the bit rate:

MP3 CD

MPEG-1 Audio

32kHz, 44.1kHz, 48kHz

32kbps ~ 320kbps (constant bit rate or variable bit rate)

The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant bit

rate.

WMA CD

WMA version 7, and 8

32kHz, 48kbps

44.1kHz, 48kbps ~ 192kbps

48kHz, 128kbps ~ 192kbps

The file recorded by mono, 48kHz, 48 kbps is not available to this unit.

Microsoft, Windows Media, and the Windows Logo are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3/WMA/JPEG and Audio CD operation

JPEG playback

Loading CD

Load a disc on which MP3 or WMA files have been

recorded in the disc slot.

In the file browser, press ▲/▼ to select the desired JPEG

file.

To display a thumbnail list, press DVD MENU.

Press ◀/▶/▲/▼ to select the desired file.

“Reading” will appear on the TV screen. Reading time

will depend on the number of files on the disc.

(To return to the file browser, press TOP MENU.)

• When PLAY is pressed after displaying the file

browser, playback begins automatically starting from

the first file. In this case, if the first file is a JPEG file,

the first JPEG file is played back. If the first file is an

MP3/WMA file, only MP3/WMA files are played back

in order. If there is no file at a root directory, playback

does not begin automatically.

A file browser screen will appear on the TV screen.

Operation status

File number Elapsed time Selected file name

1/15 00:00:00

/MP3-5.MP3

Select Files

Repeat :Off

MP3-5

MP3-6

Tool kit

window

WMA-11

WMA-12

Picture-1

Picture-2

Picture-3

Picture-4

Mode

:Off

File list

Press ENTER. The selected picture appears on the

Music Playing

screen.

Cursor

Preview window

Rotating an image

File type

You can rotate an image by 90 degrees.

Press ANGLE during playback of the image.

: Indicates Music file (Audio CD/MP3/WMA)

: Indicates Picture file (JPEG)

“

”, “ ”, “

” or “ ” appears on the screen.

• In case the current directory includes 8 files or more,

press ▲/▼ to scroll in the file list.

Zooming an image

Zoom function also can be used in viewing JPEG files.

Press ZOOM (see “Zooming” on page 27).

• To see contents in folder, select the folder and then

press ENTER. To return to the parent directory, select

“

Go Up ...” then press ENTER.

Press STOP to end playback.

• In case of a CD containing a mixture of MP3, WMA

and JPEG files, the files are played back by selecting

them from the file browser.

• The file browser appears on the screen. If you want to

watch the other file, repeat steps 1 ~ 2.

NOTE

MP3/WMA and Audio CD playback

• When an image exceeds 5760 x 3840 pixels, the entire

image cannot be displayed on a screen, preview window

or thumbnail list.

In the file browser, press ▲/▼ to select the desired file.

• When PLAY is pressed after displaying file browser

displayed, playback begins automatically starting from

the first file. In this case, if the first file is an MP3/WMA

file, only MP3/WMA files are played back in order. If

the first file is a JPEG file, the first JPEG file is played

back. If there is no file at a root directory, playback

does not begin automatically.

Slide show playback

The slide show enables you to view pictures (files) one after

another automatically.

Preparation:

Press ENTER.

Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or

“15 Seconds” (see page 32).

The selected file starts playing back.

Press STOP to end playback.

Select your desired starting file for the slide show in step

1 on the above.

• The unit records the stopped point. “ ” appears on

the screen. Press PLAY to resume playback (from the

scene point).

Press ENTER or PLAY to start slide show from the

selected file.

• If you press STOP again or unload the disc, the unit

will clear the stopped point.

• If you press STILL/PAUSE during the slide show, the

slide show stops temporary. “ ” appears briefly on the

screen.

• If the picture appears upside down or sideways, press

ANGLE repeatedly until it’s right side up. “ ”, “ ”,

NOTE

• During MP3/WMA/JPEG-Playback, you cannot use Direct

“

” or “ ” appears on the screen.

Skip and A-B Repeat functions.

• You can use Repeat (Track or All), Random functions and

Program playback for MP3/WMA/JPEG-Playback (see

page 31).

• Press PLAY or SKIP

again to resume the slide

show.

• When the slide show playback finished, the file list

appears.

• To stop the slide show, press STOP. The file list

appears.

Select Files

NOTE

The file type to make it display in the file browser can be

chosen.

• During JPEG playback, you cannot use Direct Skip and

A-B Repeat functions.

Press ◀/▶ to select “Select Files” at right column in the

file browser.

• It may have a longer interval due to a size of data.

• Press ENTER, then press ▲/▼ to select file type from

the list (Music or Picture).

Press ENTER to add/remove check mark. Checked file

type will be displayed in the file browser.

Press RETURN to save the setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Function setup

MP3/WMA/JPEG and Audio CD operation

Repeat playback (CD)

Basic operation buttons

Use the following buttons on the remote control to

In the file browser, press ▲/▼/◀/▶ to select

operate the menu.

“Repeat” during stop mode.

Press ENTER repeatedly to select “Track” or “All”.

Press PLAY.

• The unit automatically starts repeat playback after

finishing the current track.

To resume normal playback

Select Repeat : “Off” in step 2.

NOTE

• The repeat or random function is canceled when you eject

the disc or turn the power off.

• The track repeat function is canceled when SKIP

is pressed.

• In case of Audio CD, the function of A-B Repeat also can

be used. See “A-B Repeat playback” (see page 27).

Random playback (CD)

SETUP: Press to open or close the menu screen.

• During stop mode, the DVD SETUP

screen displays.

In the file browser, press ▲/▼/◀/▶ to select

“Mode” during stop mode.

• During playback mode, the TV MENU

displays.

Press ENTER to select “Random”.

Press PLAY.

▲/▼/◀/▶: Press to select a desired item on the

• The Random playback will start.

screen or adjust a selected item.

To resume normal playback

Select Mode : “Off” in step 2.

ENTER: Press to go to the next step or complete

the setting.

Program playback (CD)

RETURN: Press to return to the previous step.

In the file browser, press ▲/▼/◀/▶ to select

“Edit Mode” during stop mode, then press ENTER.

• When “Edit Mode” is black color, you can mark the

files which you want to add into Program list.

Quick guide for DVD MENU

operation

example: Setting the language

Press ◀/▶/▲/▼ to select the file you want to add

into the program list.

Press SETUP and the SETUP screen displays.

• Press ENTER. Selected file was marked.

Repeat this procedure to select the other files.

Press ▲/▼ to select

(LANGUAGE), then press

Press ◀/▶/▲/▼ to select “Add To Program”.

Then press ENTER. All marked files are added into

the program list.

◀/▶ or ENTER.

: English

• When you finish storing the files you want into the

Program list, select “Edit Mode” again and press

ENTER to release edit mode.

Subtitle

Audio

: English

Press ▲/▼ to select “Program View”, then press

ENTER. Program View shows only the programed

files that you have added in Step 2.

In the Program View, press PLAY. The files start to

Press ▲/▼ to select desired option, then press ▶ or

playback in programmed order that were added by you.

ENTER.

To remove file from program list in stop mode

In the Edit Mode, switch to Program View. Select the

files you want to remove, then press ENTER. Select

“Clear Program” and press ENTER. Marked file is

removed from program list.

Press ▲/▼ to select your desired language (e.g.

English), then press ENTER.

Press SETUP to return to the normal screen.

NOTE

• The program function is canceled when you eject the disc

or turn the power off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Function Setup

Icon

Selected item

Description

Language ^*1Menu ^*1

Subtitle ^*1

English / Francais / The selected language will be heard or seen.

Espanol

Audio ^*1

Other

Other language can be selected (see the “Language code

list” on page 34).

Off (Subtitle)

Subtitles do not appear.

Original (Audio)

The unit will select the first priority language of each disc.

Picture

TV Screen ^*2

When playing back a wide screen-DVD disc, it displays

the wide picture with black bands at the top and bottom of

screen.

4:3

(Letter box)

It displays the wide picture on the whole screen with left and

4:3

(Pan Scan)

(Wide)

right edges automatically cut off.

Select this mode when connecting to a wide-screen TV.

A wide screen picture is displayed full size.

16:9

Display ^*3

Off / On

On screen display can be switched on or off when you press

any buttons.

Picture Mode

There are two types of source content in pictures recorded in DVD video discs:

film content (pictures recorded from films at 24 frames per second) and video

content (video signals recorded at 30 frames per second). Make this selection

according to the type of content being viewed.

Auto

Select this position normally. The DVD player automatically

detects source content, film or video, of playback source.

Film

Video

Suitable for playback of film content pictures.

Suitable for playback of video content pictures.

JPEG Interval ^*4You can continuously playback all JPEG files automatically.

Off

Plays back one file at a time.

5 / 10 / 15

Displays images in the form of a slide show.

Seconds

Every 5 / 10 / 15 seconds the image changes.

Audio

Night Mode ^*5

Digital Out ^*6

Night Mode enables you to control the dynamic range so as to achieve a

suitable sound for your equipment.

Off

It plays back at the recording level on the disc.

Loud sound such as explosion or similar is toned down

slightly when played back. This makes it suitable for when it

is connected to a stereo.

You can select the digital output sound format corresponding to your system

connection.

Off

There is no sound output from DIGITAL AUDIO COAXIAL

OUT jack.

PCM

Change Dolby Digital to PCM for the output.

Select when connected to a 2 channel digital stereo

amplifier.

Bitstream

See page 33.

Disc audio bitstream data will be output.

Setup

Parental

Password

NOTE

^*1If the selected language is not recorded on the disc, the first priority language is selected.

^*2If the DVD disc is not formatted in the pan & scan style, it displays 4:3 style.

^*3If “Display” is not set to “On” on screen displays do not appear when you press any buttons except SUBTITLE, PLAY

MODE, MARKER, DIRECT SKIP, DISPLAY and AUDIO.

^*4You cannot display DVD SETUP screen when disc is playback

^*5This function works only during playback of Dolby Digital recorded discs.

^*6Even if you select “Bitstream”, MPEG audio will be output in PCM format.

Download from Www.Somanuals.com. All Manuals Search And Download.

Function setup

Parental control setting

Some discs are specified as not suitable for children.

Playback of such discs can be restricted with this

TV/DVD.

Temporary disabling of rating level

by DVD disc

Depending on the DVD disc, the disc may try to

temporarily cancel the rating level that you have set.

It is up to you to decide whether to cancel the rating

level or not.

Select “Parental”, then press ▶ or ENTER.

“Enter Password” screen will appear.

Load a DVD disc. (See page 26.)

Press “0000” using Number buttons (0–9).

(Please note, this is pre-setting password of this

unit). Then press ENTER. The parental level list

will appear.

If the DVD disc has been designed to temporarily

cancel the rating level, the screen which follows the

“Reading” screen will change, depending on which

disc is played. If you select “YES” with pressing

ENTER, password input screen will then appear.

• If you input a wrong number, press CANCEL.

Selected item

Level Off

Description

Enter the password with Number buttons (0–9).

The parental control setting does not

function.

Then press ENTER.

• If you interrupt the entering, press RETURN.

Level 8

Level 1

Virtually all DVD software can be

played back.

Enter Password

DVD software for adults cannot

be played back.

Playback will commence if the entered password

was correct.

• Select from level 1 to level 8. The limitation will be

more severe as the level number decreases.

NOTE

Press ▲/▼ to select from the level 1 to level 8. The

limitation will be more severe as the level number

is lower. Then press ENTER.

Press SETUP to return to the normal screen.

• After the rating is locked, the setting cannot be

changed unless you enter the correct password.

• This temporary cancellation of the rating level will be kept

until the disc is ejected.

When the disc is ejected, the original rating level will be

set again automatically.

NOTE

• The password is required every time when you change the

parental level.

• Depending on the discs, the TV/DVD may not be able to

limit playback.

• Some discs may not be encoded with specific rating level

information though its disc jacket says “adult.” For those

discs, the parental control feature will not work.

Set the new password

Select “Password”, then press ▶ or ENTER.

“Enter Current Password” screen will appear.

Press Number buttons (0-9) to enter the

password you have stored.

• If you input a wrong number, press CANCEL.

Then press ENTER. “Enter New Password” screen

will appear. Press Number buttons (0–9) to input

the new password.

Press ENTER. Now your new password has been

set. Be sure to remember this number!

NOTE

If you forget the password...

1.Press EJECT to remove the disc.

2.While holding 7 down on the remote control and at the

same time press STOP on the unit. “Password Clear”

appears on the screen. Now the password has been

returned to the initial value (“0000”).

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Language code list

Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 32).

Language Name

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali; Bangla

Bhutani

Bihari

Breton

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Code Language Name

1112 Fiji

1111 Finnish

1116 French

2927 Frisian

1123 Galician

1128 Georgian

1835 German

1129 Greek

1135 Greenlandic

1136 Guarani

1211 Gujarati

1531 Hausa

Code Language Name

1620 Lingala

1619 Lithuanian

1628 Macedonian

1635 Malagasy

1722 Malay

2111 Malayalam

1415 Maltese

1522 Maori

Code Language Name

2224 Singhalese

2230 Slovak

2321 Slovenian

2317 Somali

2329 Spanish

2322 Sundanese

2330 Swahili

2319 Swedish

2328 Tagalog

2325 Tajik

2324 Tamil

2411 Tatar

2415 Telugu

2425 Thai

2528 Tibetan

2611 Tigrinya

2629 Tonga

1611 Turkish

2622 Turkmen

2630 Twi

Code

2919

2921

2922

2925

1529

2931

2933

2932

3022

3017

3011

3030

3015

3018

1225

3019

3025

3028

3021

3033

3121

3128

3136

3219

3225

1335

3325

3418

2019

3525

3631

2122 Marathi

1724 Moldavian

1731 Mongolian

1811 Nauru

1933 Nepali

1819 Norwegian

1831 Oriya

1929 Panjabi

1924 Pashto, Pushto

1911 Persian

1224 Hebrew

1436 Hindi

1218 Hungarian

1228 Icelandic

1217 Indonesian

2335 Interlingua

1215 Irish

1711 Polish

2123 Italian

1930 Portuguese

2011 Quechua

2033 Rhaeto-Romance

2124 Romanian

2129 Russian

2121 Samoan

2135 Sanskrit

2125 Scots Gaelic

2131 Serbian

1311 Japanese

3618 Javanese

1325 Kannada

1828 Kashmiri

1329 Kazakh

1411 Kirghiz

2422 Korean

1524 Kurdish

1525 Laothian

1530 Latin

2731 Ukrainian

2823 Urdu

2825 Uzbek

2831 Vietnamese

2923 Volapük

2911 Welsh

1714 Wolof

2928 Xhosa

2918 Yiddish

2924 Yoruba

2914 Zulu

Danish

Dutch

English

Esperanto

Estonian

Faroese

2225 Serbo-Croatian

2211 Shona

2232 Sindhi

1625 Latvian, Lettish

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Troubleshooting

Problem

Possible Solution

• No power

• Check if you pressed POWER on the TV/DVD,or on the remote control unit.

(See page 16.)

• Is the AC cord disconnected? (See page 9.)

• Has the power been turned on? (See page 16.)

• Unit cannot be operated.

• External influences such as lightning, static electricity, may cause improper

operation. In this case, operate the unit after first turning off the power of the TV/

DVD or unplugging the AC cord and replugging it in after 1 or 2 minutes.

• Remote control unit does not

operate.

• Are batteries inserted with polarity (+, –) aligned? (See page 10.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or fluorescent lighting?

• Is a fluorescent light illuminated near the remote control sensor?

• Picture is cut off/with sidebar

screen.

• Are screen mode adjustments such as view mode choose made correctly? (See

page 18.)

• Strange color, light color, or color • Adjust the picture tone. (See page 24.)

misalignment

• Is the room too bright? The picture may look dark in a room that is too bright.

• Power is suddenly turned off.

• Is the sleep timer set? (See page 13.)

• Check the Auto Shut Off settings. (See page 24.)

• The unit’s internal temperature has increased.

Remove any objects blocking vent or clean.

• No picture

• No sound

• Is connection to other components correct? (See page 15.)

• Is correct input signal source selected after connection? (See page 15.)

• Is the correct input selected? (See page 15.)

• Is picture adjustment correct? (See page 24.)

• Is the volume too low? (See page 13.)

• Have you pressed MUTE on the remote control unit? (See page 13.)

• The TV sometimes makes a

cracking sound.

• This is not a malfunction. This happens when the cabinet slightly expands and

contracts according to change in temperature. This does not affect the TV’s

performance.

Troubleshooting-Digital broadcasting

The example of an error

Possible Solution

message displayed on a screen

• Digital channel signal strength is • Check the antenna cable. Check that the antenna is correctly setup.

low

• Digital channel is scrambled

• Audio only

• It is subscription channel. Contact the service provider.

• The channel has audio contents only.

Troubleshooting-PC mode

Problem

Possible Solution

• There is no image.

• Make sure the RGB cable is properly connected. (See page 25.)

• Make sure the output signal of the PC and the input signal setting of the LCD TV set

are matched.(See page 25.)

• Some software prohibit video playback on an external display when playing back a

video with a notebook PC. This is not attributable to a problem with the LCD TV set.

• There is no sound.

• The text is blurred.

• Make sure the PC audio cable is properly connected. (See page 25.)

• Check if the mute function activates, or if the volume is set to minimum. (See page

13.)

• Adjust “Clock” and “Phase” using the PC Setting menu. (See page 24.)

• The image is not displayed in the • Adjust “Hor Position” and “Ver Position” using the PC Setting menu. (See page 24.)

center of the screen.

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly

delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage temperature: –4°F to +140°F (–20°C to +60°C)

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Troubleshooting-DVD

Problem

Possible Solution

• Playback doesn’t start.

• No disc is inserted. (See page 26.)

• The disc may be dirty. Clean up the disc. (See page 7.)

• The TV/DVD cannot play CD-ROMs, etc. (See page 6.)

• No picture.

• No sound.

• TV/DVD selector is not set correctly. (See page 26.)

• Check the input selector of the amplifier is set properly.

• The TV/DVD is in the special playback mode. (See page 27.)

• Select the correct Audio Output position on AV amplifier.

• Picture is distorted during fast

reverse/forward playback.

• The picture will be distorted occasionally.

• Stopping playback, search,

slowmotion play, repeat play, or

program play, etc. cannot be

performed.

• Some discs may not do some of the functions.

• No on-screen display.

• No surround sound.

• Select Display to On. (See page 32.)

• The setup does not match your stereo system.

• The TV/DVD or remote operation

key is not functioning.

• Turn off the TV/DVD and unplug the AC power cord for several minutes, then

replug it.

• Playback does not start when the

title is selected.

• Check the Parental setup. (See page 33.)

• Audio soundtrack and/or subtitle

language is not changed when

you playback a DVD.

• Multilingual language is not recorded on the DVD disc. (See page 28.)

• No subtitle.

• Some discs have no subtitles. (See page 28.)

• Subtitles are cleared. Press SUBTITLE. (See page 28.)

• Angle cannot be changed.

• “ ” appears on the screen.

• Multi-angles are not recorded on the DVD disc. (See page 28.)

• The function is prohibited with the TV/DVD or the disc. (See page 26.)

CLEARING THE PASSWORD

If you forget the password, clear the password using the following procedure.

(Illustration is LC-26DV27UT.)

Press and hold both VOL – on the TV/DVD and press 0 on the remote control simultaneously for a few

MENU screen

seconds until

appears on the screen.

Now the old password was cleared. You can set the new password.

The password is

NOTE

• As a precautionary measure, make a note of your password above, cut it from this manual, and keep it in a safe place.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Specifications

Item

Model: LC-26DV27UT

26” Class (26” Diagonal)

1,049,088 pixels (1366 x 768)

Model: LC-32DV27UT

32” Class (31 1/2” Diagonal)

LCD

Size

panel

Resolution

TV-standard (CCIR)

Receiving VHF/UHF

American TV Standard ATSC/NTSC System

VHF 2-13ch, UHF 14-69ch

1-135ch (non-scrambled channel only.)

Function

Channel

CATV

Digital Terrestrial 2-69ch

Broadcast (8VSB)

Digital Cable^*1

1-135ch (non-scrambled channel only.)

(64/256 QAM)

Audio multiplex

BTSC System

Audio out

5.0W x 2

Terminals Side

INPUT 1

AV in, S-VIDEO in

INPUT 2

INPUT 3

INPUT 4

INPUT 5

INPUT 6

AV in

COMPONENT in, Audio in (Share with INPUT 2)

HDMI in with HDCP, Audio in

HDMI in with HDCP

15-pin mini D-sub female connector, Audio in (φ 3.5 mm jack)

Coaxial Digital audio output x 1 (PCM/Dolby Digital)

DIGITAL AUDIO

OUTPUT

ANT/CABLE

75 Ω Unbalance, F Type x 1 for Analog (VHF/UHF/CATV)

and Digital (AIR/CABLE)

OSD language

Power Requirement

Power Consumption

Weight

English/French/Spanish

AC 120 V, 60 Hz

70 W (0.7 W Standby with AC 120V)

104 W (0.7 W Standby with AC 120V)

TV + stand

TV only

TV + stand

TV only

21.4 Ibs./9.7 kg

18.1 Ibs./8.2 kg

25.7 Ibs./11.5 kg

22.5 Ibs./10.0 kg

Dimension^*2

(W x H x D)

26 / x 20x 9 / inch

31 / x 22 / x 9 / inch

26 / x 18 / x 3 / inch

31 / x 21 / x 4 / inch

DVD

Signal system

Applicable disc

NTSC

section

DVD (12 cm, 8 cm), CD (12 cm, 8 cm)

DVD : 4 Hz - 44K Hz / CD : 4 Hz - 20K Hz

Below Measurable Level

CD : Wavelength: 780 - 790 nm

Maximum output power: 7 mW

DVD : Wavelength: 652 - 662 nm

Maximum output power: 5 mW

Frequency response

Wow and flutter

Pickup

Operating temperature

+41°F to +104°F (+5°C to +40°C)

^*1Emergency alert messages via Cable are unreceivable.

^*2The dimensional drawings are shown on the inside back cover.

• Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal

brightness and temperature at 77°F/25°C.

• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for

product improvement without prior notice. The performance specification figures indicated are nominal values of production

units. There may be some deviations from these values in individual units.

Download from Www.Somanuals.com. All Manuals Search And Download.

Calling for Service

For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or

customer assistance, please call 1-800-BE-SHARP.

LIMITED WARRANTY

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the

“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,

either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the

purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has

been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This

limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely

for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product

for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may

vary. Please contact 1-888-GO-SHARP for further information.

In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of

purchase to the servicer, which proof must include the date of purchase.

To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or

implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND

IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR

PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE

DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF

PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE.

The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy

available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are

permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all

liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,

whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way

responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,

lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or defects in the

Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp

be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on

warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.

Model Specific Section

Your Product Model Number & Description:

Warranty Period for this Product:

LC-26DV27UT/LC-32DV27UT Combination Liquid Crystal Television And DVD/CD player

(Be sure to have this information available when you need service for your

Product.)

OOnnee ((11)) yyeeaarr ppaarrttss,a9n0d dlaabyosr lfarobmorthfreomdattheeofdpautercohfapseu.rchase.

Additional Exclusions from

Warranty Coverage (if any):

Image Retention resulting from a fixed image being displayed for long

periods of time is not covered by this Limited Warranty (see Operation

Manual on how to prevent this).

Where to Obtain Service:

From a Sharp Authorized Servicer located in the United States. To find the

location of the nearest Sharp Authorized Servicer, please call Sharp toll free

at 1-800-BE-SHARP.

What to do to Obtain Service:

Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure

to have proof of purchase available. If you ship the Product, be sure it is

insured and packaged securely. Please use two persons to carry the Product,

transport it in its original packaging, and ensure that the Product is covered

to avoid scratches and damage. Sharp shall not be responsible for lost,

stolen or misdirected mail or for damage to the product incurred during

shipping.

TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP

OR VISIT www.sharpusa.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Sharp Microwave Oven R 775 User Manual
Sony Computer Hardware AR B1570 User Manual
Sony Computer Monitor CPD E220 User Manual
Sony Graphics Tablet SGP521 User Manual
Sony Headphones DREX12IPBLU User Manual
Sony Projector VPL PX32 User Manual
SoundCraft DJ Equipment 1GB2 User Manual
Speco Technologies Security Camera VL5700BPVF User Manual
Sunbeam Mixer 2484 User Manual
Sunrise Medical Mobility Aid Quickie V 121 User Manual