MINI COMPONENT SYSTEM
MODEL
CD-G10000
SPEAKER SYSTEM
MODEL
CP-G10000S
Accessories
Please confirm that the following accessories are included.
OPERATION MANUAL
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP
product.
Remote control
1
AM loop antenna
1
FM antenna
1
(RRMCG0395AWSA) (QANTL0005AWZZ)
(92LFANT1746A)
CD-G10000
CD-G10000 Mini Component System consisting of CD-G10000 (main
unit) and GBOXSA090AWM1 (rear speaker system).
Gray
Red
Black
Black
CP-G10000S
CP-G10000S Speaker System consisting of CP-G10000S (front
speaker system) and CP-SW10000S (active subwoofer).
Wire for front speaker Wire for rear speaker
Subwoofer cable
1
2
2
(QCNWHA003AWZZ) (QCNWHA004AWZZ) (QCNWGA003AWPZ)
Note:
Only the above accessories are included.
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
IMPORTANT SAFETY INSTRUCTIONS
1 Read Instructions - All the safety and operating instructions should
10 Ventilation - Slots and openings in the cabinet are provided for venti-
lation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or cov-
ered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been
adhered to.
be read before the product is operated.
2 Retain Instructions - The safety and operating instructions should be
retained for future reference.
3 Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.
4 Follow Instructions - All operating and use instructions should be
followed.
11 Power Sources - This product should be operated only from the type
of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
5 Cleaning - Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
12 Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
6 Attachments - Do not use attachments not recommended by the prod-
uct manufacturer as they may cause hazards.
7 Water and Moisture - Do not use this product near water - for ex-
ample, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8 Accessories - Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufac-
turer, or sold with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a mounting ac-
cessory recommended by the manufacturer.
Alternate Warnings - This product is equipped with a three-wire
grounding-type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding-type plug.
13 Power-Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
9 A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the product and cart combination to over-
turn.
14 Protective Attachment Plug - The product is equipped with an at-
tachment plug having overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the
same overload protection as the original plug.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
IMPORTANT SAFETY INSTRUCTIONS (continued)
15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this
is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and
built-up static charges. Article810 of the National Electrical Code, ANSI/
NFPA 70, provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an an-
tenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
product through openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
20 Servicing - Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
21 Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
Example of antenna grounding as per
National Electrical Code, ANSI/NFPA 70
a) When the power-supply cord or plug is damaged,
b)If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
ANTENNA LEAD IN WIRE
GROUND
CLAMP
d)If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the op-
erating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation,
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
e) If the product has been dropped or damaged in any way, and
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
f) When the product exhibits a distinct change in performance - this
indicates a need for service.
NEC - NATIONAL ELECTRICAL CODE
S2898A
22 Replacement Parts - When replacement parts are required, be sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
16 Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and
power-line surges.
23 Safety Check - Upon completion of any service or repairs to this prod-
uct, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
17 Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be
fatal.
24 Wall or Ceiling Mounting - The product should be mounted to a wall
or ceiling only as recommended by the manufacturer.
25 Heat - The product should be situated away from heat sources such
as radiators, heat registers, stoves, or other products (including ampli-
fiers) that produce heat.
18 Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
CD-G10000
CP-G10000S
Page
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 10
ENERGY STAR® Program Information
Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 - 15
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Subwoofer control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Products that have earned
the ENERGY STAR® are
designed to protect the
environment through
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
superior energy efficiency.
CD or MP3 disc Playback
Listening to a CD or MP3 disc . . . . . . . . . . . . . . . . . . . . . .20 - 22
Advanced CD or MP3 disc playback . . . . . . . . . . . . . . . . .23 - 25
MP3 navigation (only for MP3 files) . . . . . . . . . . . . . . . . . .26 - 29
To comply with the ENERGY STAR® standards mentioned above,
please cancel the demonstration mode, as described on page15.
Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30, 31
ENERGY STAR® is a U.S. registered mark.
Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2) . . . . . . . 32, 33
Tape Recording
Recording on a cassette tape . . . . . . . . . . . . . . . . . . . . . . .33 - 35
Advanced Features
Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . .36 - 39
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 41
References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 - 43
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 46
CONSUMER LIMITED WARRANTY . . . . . . . . . . . . . .Back cover
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
CD-G10000
CP-G10000S
General
In case of an electrical storm, unplug the
system for safety.
Please ensure that the system is positioned in a well-ventilated
area and ensure that there is at least 4" (10 cm) of free space
along the sides, top and back of the unit.
4" (10 cm) 4" (10 cm)
4" (10 cm)
Hold the AC power plug by the head when
removing it from the AC outlet, as pulling
the cord can damage internal wires.
4" (10 cm)
Do not remove the outer cover, as this
may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.
Do not place active subwoofer system on
the same surface as main unit to prevent
sound interruption during playback.
Floor
This system should only be used within the range of 41°F - 95°F
(5°C - 35°C).
Use the unit on a firm, level surface free from
vibration.
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of acci-
dent causing damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage other than that
which is specified.
Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.
Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location and various other factors. It is advisable to avoid
exposure to high volume levels, which occurs while turning the unit
on with the volume control setting up high, or while continually lis-
tening at high volumes.
Do not place anything on top of the unit and subwoofer.
Do not expose the system to moisture, to temperatures higher
than 140°F (60°C) or to extremely low temperatures.
If your system does not work properly, disconnect the AC power
cord from the AC outlet. Plug the AC power cord back in, and
then turn on your system.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
CD-G10000
CP-G10000S
Front panel
Reference page
1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 18
4. Disc Track Up or Fast Forward, Tape 2 Fast Forward,
Tuner Preset Up, Time Up Button . . . . . . . . . . 19, 22, 31, 33
5. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . .19, 36,39
6. Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
7. Tuning Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
8. Disc Track Down or Fast Reverse, Tape 2 Rewind,
13
1
2
3
14
15
16
17
18
19
20
21
Tuner Preset Down, Time Down Button . . . . . 19, 22, 31, 33
9. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . 18
10. Tape 1 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 32
11. Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
12. Game/Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
13. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 21
14. Disc Direct Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
15. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 21
16. Character Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
17. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
18. Disc Play or Repeat, Tape Play Button . . . . . . . . . 21, 24, 32
19. Memory/Set Button . . . . . . . . . . . . . . . . 19, 25, 29, 31, 36, 39
20. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . 34, 35
21. MP3 Disc Navigation Mode Select Button . . . . . . . . . . . . . 27
22. Disc or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . 22, 33
23. Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
24. Extra Bass/Demo Mode Button . . . . . . . . . . . . . . . . . . 15, 18
25. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
26. Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . 32
27. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
28. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
29. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
30. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4
5
6
7
22
23
24
25
26
8
9
10
11
27 28 29 30
12
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Controls and indicators (continued)
Display
1
2
3
4 5 6 7 8
Reference page
1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2. MP3 Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3. MP3 Title Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4. MP3 Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
6. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
7. Timer Recording Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8. Tape 2 Record Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
9. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
10. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 30
11. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 30
12. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 29, 31
13. Tape Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
14. MP3 Disc Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
15. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
16. Disc Repeat Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 24
17. Disc Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
18. Disc Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
14 15 16
9 10 11 12
13
17
18
Rear panel
Reference page
1. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2. Subwoofer Pre-output Jack . . . . . . . . . . . . . . . . . . . . . . . . . 14
3. AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4. FM 75 Ohms Antenna Terminal . . . . . . . . . . . . . . . . . . . . . . 12
5. FM Antenna Ground Terminal . . . . . . . . . . . . . . . . . . . . . . . 12
6. AM Loop Antenna Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7. Video Output Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
8. Front Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. Rear Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4
5
6
7
1
2
8
9
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Front speaker
1. Woofers
2. Tweeter
3. Bass Reflex Duct
4. Speaker Terminals
3
4
2
1
1
Rear speaker
1. Full-range Speakers
2. Speaker Terminals
2
4
5
6
Active subwoofer
Reference page
1
2
1. Power Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. Subwoofer
3. Bass Reflex Duct
4. Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6. Crossover Frequency Control . . . . . . . . . . . . . . . . . . . . . . 17
7. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8. Subwoofer Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
9. AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7
8
9
3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Controls and indicators (continued)
Remote control
1
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 16
2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 21
3. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 19, 36, 39
4. Character Input/Disc Direct Search Buttons . . . . . . . . 23, 28
5. MP3 Disc Navigation Mode Select Button . . . . . . . . . . . . . 27
6. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
7. Memory/Set Button . . . . . . . . . . . . . . . . 19, 25, 29, 31, 36, 39
8. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . 34, 35
9. Disc Track Down or Fast Reverse, Tape 2 Rewind,
Tuner Preset Down, Time Down Button . . . . . . 19, 22, 31, 33
10. Disc or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . 22, 33
11. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
12. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
13. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . 18
14. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
15. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 18
16. Disc Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
17. Character Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
18. Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
19. Disc Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . 18, 25
20. Disc Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
21. Disc Track Up or Fast Forward, Tape 2 Fast Forward,
15
2
3
4
16
17
18
5
6
7
8
9
10
11
19
20
21
22
23
24
Tuner Preset Up, Time Up Button . . . . . . . . . . . 19, 22, 31, 33
22. Disc Play or Repeat, Tape Play Button . . . . . . . . . 21, 24, 32
23. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
24. Game/Video Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
25. MP3 Disc Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
26. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 18
12
13
14
25
26
10
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
CD-G10000
CP-G10000S
Make sure to unplug the AC power cord before making any connections.
Antenna connection (see page 12)
AM loop antenna
Rear speaker
(right)
Front speaker
(right)
FM antenna
Front speaker
(left)
Rear speaker
(left)
Connecting the subwoofer
(see page 14)
Speaker connection (see page 12)
AC outlet
(AC 120 V, 60 Hz)
AC power connection (see page 14)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
System connections (continued)
Antenna connection
Supplied FM antenna:
Speaker connection
Front speakers:
Connect the black wire to the FRONT SPEAKERS (-) terminal, and
the red wire to the FRONT SPEAKERS (+) terminal.
Connect the FM antenna wire to the FM 75 OHMS terminal and
position the FM antenna wire in the direction where the strongest
signal can be received.
Rear speakers:
Connect the black wire to the REAR SPEAKERS (-) terminal, and
the gray wire to the REAR SPEAKERS (+) terminal.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM LOOP jack. Position the
AM loop antenna for optimum reception. Place the AM loop antenna
on a shelf, etc., or attach it to a stand or a wall with screws (not sup-
plied).
Front speaker (right)
Front speaker (left)
Rear speaker (right)
Rear speaker (left)
Red
Gray
Black
Caution:
Note:
Connect the speaker wires to the speakers first, then to the unit.
Never mistake the FRONT SPEAKERS and the REAR SPEAK-
ERS terminals. Otherwise the unit or the speakers may be dam-
aged.
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
If you use other speakers with impedance lower
than that specified, the unit may be damaged.
Front speakers: 8 ohms Rear speakers: 16 ohms
Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
Installing the AM loop antenna:
< Assembling >
< Attaching to the wall >
Do not let the bare speaker wires touch each
other.
Incorrect
Incorrect
Wall Screws (not supplied)
Do not allow any objects to fall into or to be placed
in the bass reflex ducts.
Do not stand or sit on the speakers. You may be injured.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Placing the speaker system
To enjoy the surround effect, we recommend that you place each
speaker as shown to the below.
Outdoor FM antenna
Use an outdoor FM antenna if you require better reception.
Consult your dealer.
Active
subwoofer
TV
Outdoor
FM antenna
Main unit
Front speaker
(right)
Front speaker
(left)
75 ohm
coaxial cable
Note:
When an outdoor FM antenna is used, disconnect the supplied FM
antenna wire.
Rear speaker
(left)
Rear speaker
(right)
Notes:
The front speakers, rear speakers and active subwoofer are mag-
netically shielded.
Therefore, they do not affect the display even if you use them near
the TV. However, some color variation may occur, depending on
the type of TV used.
If color variation occurs...
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
If the color variation is still present...
Move the speakers further away from the TV.
If any kind of magnet or an electromagnet is placed too close to
the TV and the system, irregular colors may appear on the TV
screen.
Note:
The speaker grilles are not removable.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
System connections (continued)
AC power connection
Make sure to unplug the AC power cord of the main unit before
making any connections.
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the
unit first, the unit will enter the demonstration mode.
Connecting the subwoofer
Use the subwoofer cable to connect the SUBWOOFER PRE-OUT
jack on the main unit and the SUBWOOFER IN jack on the active
subwoofer.
Main unit
Main unit
To subwoofer
output jack
AC outlet
(AC 120 V, 60 Hz)
Active subwoofer
Subwoofer cable
Active subwoofer
To subwoofer
input jack
AC outlet
(AC 120 V, 60 Hz)
Notes:
The unit will start the tape initialization when plugged in to the AC
outlet. During this process, an initializing sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
Unplug the AC power cord from the AC outlet if the unit will not
be in use for a prolonged period of time.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Cooling fan:
Demonstration mode
When you plug the unit in for the first time, the unit will enter the
demonstration mode. You will see words scroll.
The main unit and the active subwoofer are built with a cooling fan
at the rear of the units for improved cooling. Please do not cover the
opening of the fan with any obstacles, as this will block proper venti-
lation.
Main unit
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
Active subwoofer
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
CD-G10000
CP-G10000S
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
Battery installation
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
Keep the remote control away from moisture, heat, shock, and
vibrations.
1
2
Open the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them toward the
battery terminals.
Close the battery cover.
3
Test of the remote control
Check the remote control after checking all the connections (see
pages 11 - 14).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
Remote sensor
Precautions for battery use:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leak-
age.
8" - 20'
(0.2 m - 6 m)
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Installing the batteries incorrectly may cause the unit to malfunc-
tion.
Battery removal:
Open the battery cover, and pull up the battery to take out.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Subwoofer control
CD-G10000
CP-G10000S
Before you turn the system on/off on the main unit, minimize the
speaker volume on the main unit and turn the VOL. control of the
subwoofer to " ".
Power switch
The POWER indicator lights up when you press the POWER switch
to ON.
Volume control
Turn the VOL. control clockwise to increase the volume, and turn it
counterclockwise to decrease the volume.
Crossover frequency control
Adjust the high frequency cut-off point. Frequencies higher than the
set frequency are removed.
To emphasize the bass, turn this control toward 35 Hz and increase
the volume.
Note:
Observe the following to avoid malfunction and sound distortion.
Do not set the volume too high on the main unit. The subwoofer may
be damaged.
Power indicator
17
Download from Www.Somanuals.com. All Manuals Search And Download.
General control
CD-G10000
CP-G10000S
Volume control
Main unit operation:
When the VOL. control is turned clock-
wise, the volume will increase. When it is
turned counterclockwise, the volume will
decrease.
.....
0
30 MAXIMUM
Remote control operation:
Press the VOL (+ or -) button to increase
or decrease the volume.
Bass control (X-BASS)
When the power is first turned on, the
unit will enter the extra bass mode which
emphasizes the bass frequencies, and
"X-BASS" will appear. To cancel the ex-
tra bass mode, press the X-BASS/DEMO
(X-BASS) button.
Equalizer
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
In CD/TUNER/TAPE mode
In GAME/VIDEO mode
No equalization.
For rock music.
FLAT
FLAT
No equalization.
To turn the power on
Press the ON/STAND-BY button to turn the power on.
ROCK
ROCK For rock music.
CLASSIC For classical music.
POPS
VOCAL Vocals are enhanced.
For jazz.
CLASSIC
ACTION
SPORTS
RACING
For classical music.
For action games.
For sports games.
For car racing games.
After use:
For pop music.
Press the ON/STAND-BY button to enter the power stand-by
mode.
Illumination light control
When the power is turned on, light illuminates around the display.
Hold down the CLEAR/DIMMER button on the remote control for 2
seconds or more to turn on/off the light.
JAZZ
Note:
The extra bass mode is canceled when the EQUALIZER (EQUAL-
IZER MODE) button is pressed.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
CD-G10000
CP-G10000S
5 Press the
or
button to adjust the hour and
then press the MEMORY/SET button.
Press the
or
button once to advance the time by
1 hour. Hold it down to advance continuously.
6 Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
In this example, the clock is set for the 12-hour (AM 12:00) display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minute intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
or
button to se-
lect "CLOCK", and press the MEMORY/SET button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to display the time.
The time display will appear for about 10 seconds.
4 Press the
or
button to select 12-hour or 24-
Note:
hour display and then press the MEMORY/SET button.
The "CLOCK" will appear or time will flash to confirm the time dis-
play when the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 12-hour or 24-hour dis-
play) will be skipped.
"AM 12:00"
"AM 0:00"
"0:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
To change the 12-hour or 24-hour display:
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 43 for details.]
Perform "Setting the clock" from step 1.
2
The 24-hour display will appear.
(0:00 - 23:59)
Note:
The clock can also be set with the remote control.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3 disc
CD-G10000
CP-G10000S
This system can play back a standard CD, CD-R/RW in the CD for-
mat and CD-R/RW with MP3 files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the equipment used for recording.
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
Notes:
"
" indicator will light up after the unit reads information on an
MP3 disc.
This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
During VBR file playback, time counter in the display may differ
from its actual playback time.
Auto power on function:
When you press any of the following buttons, the unit turns on.
CD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
/
button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Playback will begin from track 1 on the disc 1. After that disc fin-
ishes playing, the next disc will automatically play.
After the last track on the fifth disc is played, the unit will stop
automatically.
When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the
1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4 Place the disc on the disc tray 1, label side up.
To exchange other discs while playing a disc:
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
Be sure to place 3" (8 cm) disc in the middle of the disc trays.
5" (12 cm) 3" (8 cm)
To remove the discs:
In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.
Caution:
Do not place two discs in one disc tray.
Do not play discs of special shapes (heart, octagon, etc.) as it
may cause malfunctions.
Do not push the disc tray while it is moving.
If the power fails while the tray is open, wait until the power is
restored.
5 Press the OPEN/CLOSE button to close the disc tray 1.
[CD]
[MP3]
MP3 disc indicator
If the disc tray is stopped with force, "ER-CD20" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
Total number of
tracks on the disc time of the disc of folders
whose number
is flashing
Total playing
Total number Total number
of files
whose number
is flashing
Due to the structure of its disc information, it takes longer to
read an MP3 disc than a normal CD (approximately 20 to 90
seconds).
If a disc is damaged, dirty, or loaded upside down, the disc will
skip.
6 You can place discs on the trays 2 - 5 by following steps 3
- 5.
7 Press the
/
button to start playback.
Disc play indicator
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Listening to a CD or MP3 disc (continued)
Notes:
Various disc functions
Track up/track down is possible only within individual discs.
The sound is heard during fast forward/fast reverse with a CD,
but not with an MP3 disc. For fast forward or fast reverse of an
MP3 disc, refer to playback time on the display.
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
Notes for CD:
Fast forward/fast reverse is possible only within individual discs.
When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
Stop
Press in the playback
mode.
Notes for MP3 discs:
Pause
Press in the playback
Fast forward/fast reverse is possible only within individual tracks.
When the end of the track is reached during fast forward, the next
track will be played. Playback of the track will begin when its
beginning is reached during fast reverse.
mode. Press the
/
button to resume play-
back from the paused
point.
To change the display (MP3 discs only)
While a disc is playing, press the MP3 DIS-
Track up/
Track down
Press in the playback
or stop mode.
PLAY button.
Each time the button is pressed, the display
will change as follows.
If you press the button
in the stop mode,
press the
/
button
to start the desired
track.
Fast for-
ward/Fast
reverse
Press and hold down
in the playback mode.
Release the button to
resume playback.
Track number
Elapsed
playback time
Folder name
File name
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3 disc playback
CD-G10000
CP-G10000S
To specify a disc to play
Direct track search
You can play a disc by specifying the disc number.
By using the direct search buttons, the desired tracks on the current
disc can be played.
1 Press one of the 1 - 5 buttons to select the desired disc.
Use the direct search buttons on
the remote control to select the de-
sired track while playing the se-
lected disc.
Selected track number
Selected disc number
The direct search buttons allow you to select up to number 9.
2 Within 5 seconds, press the DIRECT PLAY button on the
When selecting number 10 or higher, use the "+10" button.
main unit.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
If the direct search buttons are pressed while the disc is stopped,
Playback will begin from track 1 on the chosen disc.
After the last track on the chosen disc is played, the unit stops
automatically.
press the
/
button to start the desired track on the current disc.
Notes:
A track number higher than the number of tracks on the disc can-
not be selected.
During random play, direct search is not possible.
Note:
If the button of the disc tray with no disc is pressed, playback will not
start and the disc indicator will go out.
To stop playback:
Press the button.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Advanced CD or MP3 disc playback (continued)
Repeat play
Repeat play can play all 5 discs, all tracks on a chosen disc, or a
programmed sequence continuously.
Random play
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks on up to 5 discs:
To repeat all tracks on up to 5 discs:
Press the RANDOM button on the remote control.
Press the
/
button twice.
To repeat desired tracks:
Perform steps 1 - 6 in "Programmed play" section on page 25 and
then press the
/
button twice.
To cancel random play:
Press the
/
button.
"R" will go out.
To random play all tracks on the chosen disc:
1 Press one of the 1 - 5 but-
tons.
2 Within 5 seconds, press the DI-
RECT PLAY button.
3 Press the RANDOM button on
the remote control.
To cancel repeat play:
Press the button again.
" will go out.
/
"
To repeat all tracks on the chosen disc:
1 Press one of the 1 - 5 buttons.
2 Within 5 seconds, press the DIRECT PLAY
button twice.
To cancel random play:
Press the DIRECT PLAY button.
"R" will go out.
To cancel repeat play:
Press the DIRECT PLAY button again.
" will go out.
Notes:
If you press the
button during random play, you can move to
"
the next track by the random operation. On the other hand, the
button does not allow you to move to the previous track. The
beginning of the track being played will be located.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the but-
ton. Otherwise, the disc(s) will play continuously.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Programmed play
You can choose up to 32 selections for playback in the order you
like.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the re-
mote control while the "MEMORY" indicator is
flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
1 While in the stop mode, press the
MEMORY/SET (MEMORY) button
to enter the programming save
mode.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY"
indicator will disappear and all the programmed contents will be
cleared.
2 Press one of the 1 - 5 buttons
to select the desired disc.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original program.
Selected disc number
3 Press the direct search buttons
on the remote control to select
the desired track.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
Selected track number
or
button.
You can also select a track by pressing the
or
button.
4 Press the MEMORY/SET (MEMO-
RY) button to save the track
number.
Notes:
When a disc with programmed tracks is ejected, the program is
automatically canceled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
During the program operation, random play is not possible.
During programmed play, the DIRECT PLAY button will not work.
5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6 Press the button.
The total number of memory will ap-
pear.
7 Press the
/
button to start playback.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 navigation (only for MP3 files)
CD-G10000
CP-G10000S
MP3 navigation:
You can search and play files by folder or title. For example, when
you assign three titles to a file, enter genre (such as jazz) as title 1,
album name as title 2, and music title as title 3 to search the file by
any title.
You can search and play files by folder or title 1/2/3 within one
MP3 disc (see page 27).
By entering a name, you can search files by folder or title 1/2/3
within one MP3 disc (see page 28).
Folders or titles can be programmed within one MP3 disc (see
page 29).
When you enter file names on your PC, connect words with
hyphens. This product recognizes the first word as title 1, second
one as title 2, and third one as title 3. Up to three words can be rec-
ognized.
Example:
Folder
(File name)
Title 2
Title 1
Title 3
Folder
Title 2
Title 1
Title 3
AAA
(POPULAR-HITS 1-A MUSIC.mp3)
(POPULAR-HITS 2-B MUSIC.mp3)
BBB
CCC
(JAZZ-HITS 1-A MUSIC.mp3)
(JAZZ-HITS 2-B MUSIC.mp3)
Notes:
MP3 files must have the extension ".mp3".
(ROCK-HITS 1-A MUSIC.mp3)
(ROCK-HITS 2-B MUSIC.mp3)
(ROCK-HITS 3-C MUSIC.mp3)
(ROCK-HITS 4-D MUSIC.mp3)
Up to 100 folders or 300 files can be read on the unit. If either
limit is exceeded, no more folders/files are displayed.
This unit recognizes and displays up to 48 characters for folder
names, and up to 32 characters for title 1/2/3.
All file/folder names appear in uppercase.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
File search (by folder or title 1/2/3)
7 Use the or button to scroll and select a folder (or title),
and then press the ENTER button.
You can search and play files by folder or title 1/2/3 within one MP3 disc.
1 Press one of the 1 - 5 buttons to select a disc tray con-
taining an MP3 disc.
Folder name
2 Press the
/
button, and the unit starts to read the MP3
disc.
3 Press the button to stop playback.
If you press the
files in the selected folder (or title) are played.
/
button instead of the ENTER button, all
"NAVI READ" appears and the display shows the total number
of folders and files on the selected disc.
8 Use the or button to scroll and select a file.
MP3 disc
indicator
File name
Total number Total number
of folders
of files
4 Press the MP3 NAVIGATION button.
9 Press the
/
button to start playback.
5 Press the
,
,
or button to se-
The unit plays from the selected file to the last file in the select-
ed folder (or title), and the previous display returns.
Folder Title 1
lect "FOL", "T-1", "T-2" or "T-3".
To search files by folder name, se-
lect "FOL" (will flash).
File search by title 1/2/3:
In step 5, select "T-1", "T-2" or "T-3" and follow the same steps
as file search by folder.
Title 2 Title 3
The following steps describe file search by folder:
The unit searches all files on the disc, regardless of the folder.
6 Press the ENTER button.
To stop playback:
Press the button.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
To exit the MP3 navigation mode:
In the stop mode, press the button.
Folder name
Notes:
In the MP3 navigation mode, direct play and direct search func-
tions are disabled.
If a folder, title or file name does not appear, or appears incor-
rectly, remove and reinsert the disc and try again.
If you press the RANDOM button in the stop mode, the MP3 nav-
igation mode will be canceled.
The MP3 NAVIGATION button allows you to go one step
back.
Press the MP3 DISPLAY button to
check the number of files.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
MP3 navigation (only for MP3 files) (continued)
Character search (for folder or title 1/2/3)
By entering a name, you can search files by folder or title 1/2/3
within one MP3 disc.
8 When finished, press the ENTER button. The unit searches
for the same name within folders (or titles).
1 Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"
on page 27.
If the search word is not in the folder (or title) name, "NOT
FOUND" appears and the menu returns.
2 Press the MP3 NAVIGATION button.
3 Press the
,
,
or button to se-
Folder Title 1
9 Use the or button to scroll and select a folder (or title).
lect "FOL", "T-1", "T-2" or "T-3".
To search files by folder name, se-
lect "FOL" (will flash).
10Press the
/
button to start playback.
All files in the selected folder (or title) are played, and the previ-
ous display returns.
Title 2 Title 3
To exit the MP3 navigation mode:
In the stop mode, press the button.
4 Press the CHARACTER button for 2 seconds.
The display will be ready for editing characters.
1st row: String table
Notes:
The unit searches regardless of the case, and found names
appear in uppercase.
2nd row: Input editor (8 digits)
Some symbols do not appear properly.
5 Press the or button to select the desired alphabet.
Character entry with direct buttons:
The direct buttons on the remote
control can also be used for charac-
ter entry.
In step 5 on the left, use buttons 0 -
9 to enter alphabets.
Alphabet types changeas youpress
a button.
Press the
display.
or
button to go to the next page of character
6 Press the CHARACTER button and the active character will
be entered in the 2nd row of the display.
For example, press "2" four times to enter "C".
To delete an entered character, move the cursor to the charac-
ter with the or button and press the CLEAR/DIMMER but-
ton on the remote control.
2
A
B
C
Characters:
7 Repeat steps 5 and 6 to enter characters.
In the folder (or title) name search, you do not have to enter the
full name. The unit searches for names beginning with the en-
tered characters.
1
2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ
0
: indicates a space.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
To check, add or delete programmed contents:
In the stop mode, select a folder (or title) with the or button. If
the folder (or title) is programmed, "MEMORY" flashes.
Programmed play (for folder, title 1/2/3)
Folders or titles can be programmed within one MP3 disc.
Folder, title 1, title 2 and title 3 cannot be programmed together
simultaneously.
1 Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"
Flashes if the folder (or title)
is programmed
on page 27.
2 Press the MP3 NAVIGATION button.
3 Press the
,
,
or button to select "FOL", "T-1", "T-2"
or "T-3" and then press the ENTER button.
When you press the MEMORY button with "MEMORY" flashing,
the folder (or title) is removed from the program.
If you press the MEMORY button with "MEMORY" off, the folder
(or title) is added to the program.
To clear all programs, press the CLEAR/DIMMER button in the
stop mode.
The total number of folders (or titles) appears for 2 seconds,
and names of the first 2 folders (or titles) are displayed.
4 Press the or button to select the desired folder (or title)
and then press the MEMORY button.
To exit the MP3 navigation mode:
In the stop mode, press the button.
The programmed contents are cleared.
The folder (or title) is memorized with all the files.
5 Repeat step 4 for other folders (or titles).
Up to 10 folders (or 10 titles) can be programmed.
Notes:
The programmed contents are cleared when you eject a disc,
play another disc, switch the function, or enter the stand-by mode
with the ON/STAND-BY button.
During programmed play, the DIRECT PLAY button on the main
unit will not work.
6 Press the
/
button to start playback.
If you press the RANDOM button in the stop mode, the MP3 nav-
igation mode will be canceled.
If tracks are programmed using track numbers (see "Pro-
grammed play" on page 25):
In the MP3 navigation mode, only programs by folder (or title) name
are played. When you exit the mode, the programs by folder (or title)
name are cleared.
Even when you exit the MP3 navigation mode, programs by track
number are retained, and you can play tracks according to the num-
bers.
Programmed play will always start from the smallest folder (or
title) number.
To stop playback:
Press the button.
The programmed contents are not cleared.
(Programs by track number are cleared when you remove the disc.)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
CD-G10000
CP-G10000S
Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3 Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING button again.
Auto power on function:
To receive an FM stereo transmission:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monau-
ral, and the sound becomes clearer.
/
button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
FM stereo mode indicator
FM stereo receiving indicator
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
To recall a memorized station
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
1 Perform steps 1 - 3 in "Tuning" on page 30.
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
2 Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
3 Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorized for that preset channel number will be erased.
To erase entire preset memory
1
2
Press the ON/STAND-BY button to enter the stand-by mode.
While pressing down the button and the X-BASS/DEMO but-
ton, press the CLOCK/TIMER button until "TUNER CL" appears.
Note:
The backup function protects the memorized stations for a few
hours should there be a power failure or the AC power cord become
disconnected.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a cassette tape (TAPE 1 or TAPE 2)
CD-G10000
CP-G10000S
Tape playback
Before playback:
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
1 Press the ON/STAND-BY button to turn the power on.
2 Open the cassette com-
partment by pushing the
area marked " ".
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
3 Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played fac-
ing toward you.
TAPE 1
TAPE 2
4 Press the TAPE (1
2) button to select the cassette you
want to listen to.
5 Press the
/
button to
start playback.
Tape play indicator
Auto power on function:
When you press any of the following buttons, the unit turns on.
TAPE (1
turns on and the "TAPE" function is activated.
button (main unit and remote control): The unit turns on
2) button (main unit and remote control): The unit
/
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a cassette tape
CD-G10000
CP-G10000S
Various tape functions
Before recording:
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
Function
Main unit
Remote
control
Operation
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
Play
Press in the stop
mode.
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
Stop
Press in the playback,
fast forward or fast re-
wind mode.
For recording, use only normal tapes. Do not use metal or
CrO tapes.
Recording can be operated in the TAPE 2 compartment only.
The TAPE 1 is for playback only.
Fast for-
ward/Fast
rewind
Press in the playback
or stop mode.
Erase-prevention tab of cassette tapes:
(TAPE 2
only)
When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Caution:
To remove the cassette, press the button, and then open the
compartment.
Side A
Before changing from one tape operation to another, press the
button.
If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
Tab for side A
Tab for side B
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Recording on a cassette tape (continued)
Recording from a CD or MP3 disc
You can record the desired disc using the DIRECT PLAY button.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4 Press the
button.
Recording will be paused.
5 Press one of the 1 - 5 buttons to select the desired disc.
6 Within 5 seconds, press the DIRECT PLAY button to start
recording.
Recording is started from the selected disc. When the play-
back of the last track is finished or the end of the tape is
reached, the disc and the cassette will stop automatically.
Playback of the disc will start approximately 7 seconds after
the tape starts.
To stop recording:
Press the button.
The disc and tape will stop.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Sequential recording from several discs:
Dubbing from tape to tape
1 Perform steps 1 - 5 in "Recording from a CD or MP3 disc" on page
34.
You can record from TAPE 1 to TAPE 2.
1 Press the ON/STAND-BY button to turn the power on.
2 Within 5 seconds, press the
/
button.
2 Load
a
prerecorded cassette
To perform programmed recording:
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
1 Program discs and tracks (see pages 25, 29).
2 Press the
3 Press the
button.
button.
/
To stop recording:
Press the button.
TAPE 1
TAPE 2
The disc and tape will stop.
It is recommended that the recording tape is the same length as
the master tape.
Recording from the radio
1 Tune in to the desired station (see page 30).
3 Press the TAPE (1
2) button until "TAPE 1" appears on
the display.
2 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
4 Press the
button.
Wind past the leader of the tape, on which recording cannot be
performed.
Recording will be paused.
3 Press the
button.
5 Press the
/
button to start dubbing.
Recording will be paused.
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
4 Press the
/
button to start recording.
To interrupt recording:
Press the
To resume recording, press the
button.
Erasing recorded tapes
/
button.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
Press the TAPE (1 2) button until "TAPE 2" appears on the dis-
play.
To stop recording:
Press the button.
2
3
4
Press the
Press the
button.
button to start erasing.
Note:
/
If you hear a whistling noise while recording an AM station, move
the AM loop antenna.
Note:
Make sure that the TAPE 1 is not in use.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation
CD-G10000
CP-G10000S
Timer playback:
The unit turns on and plays the desired source (CD, MP3 disc,
tuner, tape) at a preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a program on a ra-
dio station.
Timer playback or timer recording
Before setting timer:
Daily timer: Daily timer play or daily timer recording works at
1 Check that the clock is set to the correct time (refer to page 19).
If it is not set, you cannot use the timer function.
the same preset time every day.
For example, set the timer as a wake-up call every morning.
2 For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the
TAPE 2 cassette compartment.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer to wake up.
1
2
Set the daily timer (pages 36 - 38).
Set the once timer (pages 36 - 38).
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
1 minute or more
Daily timer
3 Within 10 seconds, press the
or
button to se-
Once timer
lect "ONCE" or "DAILY", and press the MEMORY/SET but-
ton.
Start
Note:
Stop
Start
Stop
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between
operations.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
4 Within 10 seconds, press the
or
button to se-
9 Switch input with the
or
button, and then
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
When you select the tuner, select a station by pressing the
or
button, and then press the MEMORY/SET
5 Press the
or
button to select "PLAY" or
button.
"REC", and press the MEMORY/SET button.
If a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be canceled.
White
Red
10Adjust the volume using the VOL. control, and then press
the MEMORY/SET button.
Do not turn the volume up too high.
The illustrations show the daily timer setting.
11Press the ON/STAND-BY button to enter the power stand-
6 Press the
or
button to adjust the hour and
by mode.
then press the MEMORY/SET button.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
Folder name
The illustrations show the timer playback setting in the daily tim-
er mode.
7 Press the
or
button to adjust the minutes and
then press the MEMORY/SET button.
Continued to the next page
8 Set the time to finish as in steps 6 and 7 above.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Timer and sleep operation (continued)
Checking the timer setting in the timer stand-by mode:
12When the preset time is reached, playback or recording will
1 Press the CLOCK/TIMER button.
start.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
The volume will increase gradually until it reaches the preset
volume.
3 Within 10 seconds, press the or button to select
"ONCE CALL" or "DAILY CALL", and press the MEMORY/SET
13When the timer end time is reached, the system will enter
button.
the power stand-by mode automatically.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Once timer:
The timer will be canceled.
Daily timer:
Canceling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
The timer will operate at the same time every day. It will contin-
ue until the daily timer setting is canceled. Cancel the daily timer
when it is not in use.
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select
"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET but-
ton.
Timer will be canceled (the setting will not be canceled).
Note:
When performing timer playback or recording using another unit con-
nected to the GAME INPUT jacks, select "GAME" in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select
"ONCE ON" or "DAILY ON", and press the MEMORY/SET button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
Note:
The timer can also be set with the remote control.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
To cancel the sleep operation:
Sleep operation
The radio, CD, MP3 disc and cassette tape can all be turned off
automatically.
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, proceed as follows.
1 Play back the desired sound source.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
1
2
While "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the or button to select
"SLEEP OFF", and press the MEMORY/SET button.
or
button to select
"SLEEP", and press the MEMO-
RY/SET button.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
4 Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute 1-minute intervals
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record
radio programs while sleeping.
5 Press the MEMORY/SET but-
ton.
1
2
Set the sleep time (see left, steps 1 - 5).
"SLEEP" will appear.
While the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 36 - 37).
6 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
Timer playback or
The volume will be turned down 1 minute before the sleep op-
eration finishes.
recording setting
Sleep timer setting
End time
Desired time
To confirm the remaining sleep time:
1 minute - 3 hours
1
2
While "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the
"SLEEP X : XX".
or
button to select
Sleep operation will
automatically stop.
Timer playback or recording
start time
"X : XX" is remaining sleep time.
Caution:
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time while it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
CD-G10000
CP-G10000S
The connection cord is not included. Purchase a commercially avail-
able cord as shown below.
Listening to sounds of game, VCR, DVD, etc.
1 Connect a video game system, VCR, DVD, etc. to the front
Game system, VCR,
DVD player, etc.
GAME INPUT (VIDEO, AUDIO L and R) jacks.
2 Connect a TV to the rear VIDEO OUT jack.
Switch the TV input to auxiliary.
To the line output jacks
3 Press the ON/STAND-BY button to turn the power on.
4 Press the GAME/VIDEO button.
5 Play the connected equipment.
White
Yellow
You can enjoy sounds from the supplied speakers and images
on the TV.
Yellow White Red
Red
Note:
To prevent noise interference, place the unit away from the televi-
sion.
RCA cord
(not supplied)
Video cable
(not supplied)
Auto power on function:
When you press any of the following buttons, the unit turns on.
GAME/VIDEO button (main unit and remote control): The unit
turns on and the "GAME" function is activated.
/
button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
TV
To record sounds of game, VCR, etc.
1 Insert a cassette in the TAPE 2 cassette compartment.
2 Press the GAME/VIDEO button.
To video
input jack
Yellow
3 Press the
button.
Video cable
(not supplied)
Yellow
4 Press the
/
button.
5 Start the game system, VCR, etc.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart
CD-G10000
CP-G10000S
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorized SHARP dealer or service center.
Headphones
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 1/8" (3.5 mm) diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
General
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOL. control.
Symptom
The clock is not set to the Did a power failure occur? Reset
correct time. the clock. (Refer to page 19.)
When a button is pressed, Set the unit to the power stand-
Possible cause
the unit does not respond.
by mode and then turn it back on.
If the unit still malfunctions, reset
it. (Refer to page 43.)
No sound is heard.
Is the volume level set to "0"?
Are the headphones connected?
Are the speaker wires discon-
nected?
CD player
Symptom
Possible cause
Playback does not start.
Is the disc loaded upside down?
Playback stops in the mid- Does the disc satisfy the stan-
dle or is not performed
properly.
dards?
Is the disc distorted or
scratched?
Playback sounds are
skipped, or stopped in the
middle of a track.
Is the unit located near excessive
vibrations?
Is the disc very dirty?
Has condensation formed inside
the unit?
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Troubleshooting chart (continued)
Cassette deck
Tuner
Symptom
Possible cause
Symptom
Possible cause
Cannot record.
Is the erase-prevention tab re-
moved?
The radio makes unusual Is the unit placed near the TV or
noises continuously.
computer?
Cannot record tracks with Is it a normal tape? (You cannot
Is the FM antenna or AM loop an-
tenna placed properly? Move the
antenna away from the AC power
cord if it's located nearby.
proper sound quality.
Cannot erase completely.
Sound skipping.
record on a metal or CrO tape.)
Is there slack in the tape?
Is the tape stretched?
Condensation
Cannot hear treble.
Are the capstans, pinch rollers,
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
or heads dirty?
Sound fluctuation.
Cannot remove the tape. If a power failure occurs during
playback, the heads remain en-
gaged with the tape. Do not open
the compartment with great
force.
Remote control
Symptom
Possible cause
The remote control does Is the AC power cord of the unit
not operate.
plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle incor-
rect?
Does the remote control sensor
receive strong light?
42
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
If trouble occurs
Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
Care of compact discs
If such a problem occurs, do the following:
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
Keep your discs away from direct sunlight, heat, and excessive
moisture.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the center, along the radius.
Clearing all the memory (reset)
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
2
While pressing down the
button and the X-BASS/DEMO but-
ton, press the
appears.
PRESET button until "CLEAR ALL"
NO
YES
Correct
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD program.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
CD-G10000
CP-G10000S
Cleaning the tape-handling parts
Cleaning the CD pickup lens
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the laser pickup lens) should be per-
formed periodically. Lens cleaners are commercially available. Con-
tact your local CD software dealer for options.
B
C
A
Cleaning the cabinet
TAPE 1
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
C
E
B
Caution:
D
TAPE 2
Do not use chemicals for cleaning (gasoline, paint thinner, etc.).
It may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
Playback head
Capstan
Pinch roller
Erase head
Recording/Playback head
After long use, the deck's heads and capstans may become mag-
netized, causing poor sound. Demagnetize these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetizer. Read the demagnetizer's instructions
carefully before use.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
CD-G10000
CP-G10000S
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
Amplifier
Output power
Front speakers 135 watts minimum RMS per channel into
8 ohms from 100 Hz to 20 kHz, 10% total
harmonic distortion
General
Rear speakers 65 watts minimum RMS per channel into
16 ohms from 5 kHz to 20 kHz, 10% total
harmonic distortion
Power source
AC 120 V, 60 Hz
175 W
Power
consumption
Output terminals
Front speakers: 8 ohms
Rear speakers: 16 ohms
Dimensions
Width: 10-1/4" (260 mm)
Height: 13" (330 mm)
Depth: 12-7/8" (326 mm)
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Weight
23.0 lbs. (10.4 kg)
Video out: 1 Vp-p (75 ohms)
CD player
Input terminals
Game/ Auxiliary (audio signal):
500 mV/ 47 k ohms
Type
5-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
Game/Video: 1 Vp-p (75 ohms)
D/A converter
1-bit D/A converter
20 - 20,000 Hz
Frequency
response
Dynamic range
90 dB (1 kHz)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-G10000
CP-G10000S
Specifications (continued)
Tuner
Rear speaker
Frequency range
FM: 87.5 - 108.0 MHz
AM: 530 - 1,720 kHz
Type
Full-range speaker system
4" (10 cm) speaker
130 W
2
Maximum input
power
Cassette deck
Rated input power 65 W
Frequency
response
50 - 14,000 Hz (normal tape)
Impedance
Dimensions
16 ohms
Width: 7-7/8" (200 mm)
Height: 16-9/16" (420 mm)
Depth: 16-15/16" (430 mm)
Signal/noise ratio
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter
0.3 % (WRMS)
Weight
8.8 lbs. (4.0 kg)/each
Front speaker
Active subwoofer
Type
2-way type speaker system
Power source
AC 120 V, 60 Hz
2" (5 cm) tweeter
1
Power
consumption
120 W
5-1/8" (13 cm) woofer
270 W
2
Maximum input
power
Output power
400 watts minimum RMS into 6 ohms from
50 Hz to 120 Hz, 10% total harmonic distor-
tion
Rated input power 135 W
Input terminals
Subwoofer input (audio signal):
200mV / 10 k ohms at 70 Hz
Impedance
Dimensions
8 ohms
Width: 8-11/16" (220 mm)
Height: 16-9/16" (420 mm)
Depth: 16-15/16" (430 mm)
Speaker type
Impedance
Dimensions
10" (25 cm) woofer
6 ohms
Weight
12.1 lbs. (5.5 kg)/each
Width: 15-3/4" (400 mm)
Height: 16-9/16" (420 mm)
Depth: 20-1/16" (510 mm)
Weight
47.6 lbs. (21.6 kg)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original con-
tainer, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof
with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has
been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in
design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING
THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any
warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the
purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states
do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
CD-G10000 Mini Component System / CP-G10000S Speaker System
(Be sure to have this information available when you need service for your Product.)
Warranty Period for this Product:
Additional Item(s) Excluded from Warranty Coverage (if any): Non-functional accessories, supplies, and consumable items.
One (1) year parts and labor from the date of purchase.
Where to Obtain Service:
At a Sharp Authorized Servicer located in the United States.
To find a location of the nearest SharpAuthorized Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service:
Ship prepaid or carry in your Product to a Sharp Authorized Servicer.
Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and
packaged securely.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Printed in Malaysia
TINSEA075AWZZ
04K R YT 1
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
|