Sharp Car Video System LB 1085 User Manual
LB-1085  
LCD MONITOR  
LCD FARBMONITOR  
MONITEUR LCD  
MONITOR LCD  
ЖК МОНИТОР  
OPERATION MANUAL  
BEDIENUNGSANLEITUNG  
MODE D’EMPLOI  
MANUAL DE OPERACIÓN  
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ  
ENGLISH......EN1  
DEUTSCH ....DE1  
FRANÇAIS ...FR1  
ESPAÑOL.....ES1  
РУССКИЙ ....RU1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LB-1085  
LCD MONITOR  
ENGLISH  
IMPORTANT INFORMATION  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.  
WARNING:  
The lightning flash with arrow-head  
symbol, within an equilateral triangle,  
is intended to alert the user to the  
presence of uninsulated “dangerous  
voltage” within the product’s  
enclosure that may be of sufficient  
magnitude to constitute a risk of  
electric shock to persons.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
The exclamation point within a  
triangle is intended to alert the user to  
the presence of important operating  
and maintenance (servicing)  
instructions in the literature  
accompanying the product.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION  
The battery supplied with this product contains traces of Lead.  
For EU:  
The crossed-out wheeled bin implies that used batteries should not be put to the general household waste!  
There is a separate collection system for used batteries, to allow proper treatment and recycling in  
accordance with legislation. Please contact your local authority for details on the collection and recycling  
schemes.  
For Switzerland:  
The used battery is to be returned to the selling point.  
For other non-EU countries:  
Please contact your local authority for correct method of disposal of the used battery.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION  
Attention: Your product is marked with this symbol. It means that used electrical and electronic products  
should not be mixed with general household waste. There is a separate collection system for these products.  
A. Information on Disposal for Users (private households)  
1. In the European Union  
Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin!  
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper  
treatment, recovery and recycling of used electrical and electronic equipment.  
Following the implementation by member states, private households within the EU states may return their used electrical and  
electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back  
your old product free of charge if you purchase a similar new one.  
*) Please contact your local authority for further details.  
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand  
according to local requirements.  
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and  
recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to  
inappropriate waste handling.  
2. In other Countries outside the EU  
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.  
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t purchase  
a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.  
B. Information on Disposal for Business Users  
1. In the European Union  
If the product is used for business purposes and you want to discard it:  
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs  
arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.  
For Spain: Please contact the established collection system or your local authority for take-back of your used products.  
2. In other Countries outside the EU  
If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.  
Trademarks  
• HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks  
of HDMI Licensing LLC.  
• Products that have earned the ENERGY STAR® are designed to protect the environment through superior  
energy efficiency.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEAR SHARP CUSTOMER  
Thank you for your purchase of the Sharp LCD Monitor. To ensure safety and many years of trouble-free  
operation of your product, please read the Important Safety Instructions carefully before using this product.  
IMPORTANT SAFETY INSTRUCTIONS  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage  
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.  
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please  
observe the following instructions when installing, operating and cleaning the product. To ensure your safety and  
prolong the service life of your LCD Monitor, please read the following precautions carefully before using the  
product.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide  
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and  
the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to  
avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
Additional Safety Information  
15) Power Sources—This product should be operated only from the type of power source indicated on the  
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or  
local power company. For products intended to operate from battery power, or other sources, refer to the  
operating instructions.  
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may  
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill  
liquid of any kind on the product.  
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following the operating instructions.  
Adjust only those controls that are covered by the operating instructions as an improper adjustment of  
other controls may result in damage and will often require extensive work by a qualified technician to  
restore the product to its normal operation,  
e) If the product has been dropped or damaged in any way, and  
f ) When the product exhibits a distinct change in performance - this indicates a need for service.  
19) Replacement Parts—When replacement parts are required, be sure the service technician has used  
replacement parts specified by the manufacturer or have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock, or other hazards.  
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to  
perform safety checks to determine that the product is in proper operating condition.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
• Turn off the main power and unplug the AC cord from the wall outlet before handling.  
• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may  
scratch the panel surface.  
• Use a soft damp cloth to gently wipe the panel when it is really dirty.  
(It may scratch the panel surface when wiped strongly.)  
• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.  
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may  
damage the panel surface.  
• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.  
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen  
sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.  
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable  
base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use  
only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product.  
• Selecting the location — Select a place with no direct sunlight and good ventilation.  
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block  
these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the  
product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation  
openings. This product is not designed for built-in installation; do not place the product in an enclosed place such  
as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.  
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is  
dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.  
• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce heat.  
• The Liquid Crystal panel is a very high technology product with 2,073,600 pixels, giving you fine picture details.  
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please  
note that this does not affect the performance of your product.  
• Lightning — For added protection for this LCD Monitor equipment during a lightning storm, or when it is left  
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This  
will prevent damage to the equipment due to lightning and power-line surges.  
• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with  
them might be fatal.  
• To prevent fire, never place any type of candle or flames on the top or near the LCD Monitor.  
• To prevent fire or shock hazard, do not place the AC cord under the LCD Monitor or other  
heavy items.  
• Do not display a still picture for a long time, as this could cause an afterimage to remain.  
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.  
No objects filled with liquids, such as vases, should be placed on the product.  
Installation and Transportation  
• The installation, removal or transportation of the LCD Monitor must be performed by qualified service personnel.  
This product is large and heavy. Installation requires special knowledge and qualifications.  
• Customers should not attempt to install, remove, or transport the LCD Monitor by themselves.  
• SHARP shall have no liability for any accidents or damages caused by improper installation or mishandling.  
• Install the LCD Monitor in a location with minimal vibration and that is strong enough to hold the weight of the  
LCD Monitor. Otherwise, the product may fall or topple over, resulting in injury.  
• Provide enough space around the LCD Monitor so that it can easily be accessed or carried for maintenance.  
Unit: cm  
40  
70  
40  
40  
40  
40  
160  
40  
• After installation, be sure to secure and fasten the LCD Monitor so that it does not move.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
The fluorescent tubes in this product have a limited lifetime.  
• When the screen becomes darker, flickers, or does not illuminate, contact your product dealer.  
• You can check the total use time of the backlight by through the Identification menu options. (See page 26.)  
Estimated life: About 24,000 hours (The life varies depending on the use condition of the LCD Monitor.)  
• Because of the property of fluorescent tubes, the screen may flash during the initial period of use. If this  
happens, please turn off the main power switch of the monitor and turn on again after at least 5 seconds to  
confirm operation.  
WARNING:  
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be  
required to take adequate counter measures.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supplied Accessories  
Make sure the following accessories are provided with the product.  
AC cord  
Page 9  
Remote control unit (x1)  
R-6 battery (“AA” size) (x2)  
AC cord clamp (x1)  
M16 bolt cap (x2)  
Operation manual (x1)  
Page 10  
Page 10  
Page 9  
• Do not use an AC cord other than the one supplied with the monitor.  
• When the eye bolts on the top are removed, close the holes by pressing the M16 bolt caps into the holes. To  
remove the M16 bolt caps, turn them with a screw driver or coin.  
• For environmental protection!  
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.  
QUICK REFERENCE  
Installing the LCD Monitor onto a Stand  
CAUTION  
• When the LCD Monitor is installed onto a stand other than the dedicated stand, the installation may be unstable and  
may cause serious injury.  
• Installing the LCD Monitor requires special skills and should only be performed by qualified service personnel.  
Customers should not attempt to install the LCD monitor by themselves. SHARP shall have no liability for any  
accidents or damages caused by improper installation.  
• Secure the stand with anchor bolts to prevent the LCD Monitor from toppling over.  
Installing the LCD Monitor on a Wall  
CAUTION  
• To install the LCD Monitor on a wall, be sure to use the PN-ZK10 optional bracket set. The use of other brackets  
may result in unstable installation and may cause serious injury.  
This installation also requires special work on the wall. Contact your product dealer for details.  
• Installing the LCD Monitor requires special skills and should only be performed by qualified service personnel.  
Customers should not attempt to install the LCD monitor by themselves. SHARP shall have no liability for any  
accidents or damages caused by improper installation.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE  
Connecting External Speakers  
Speaker Compatibility:  
• Be sure to use external speakers with an impedance of 4 ohm and a rated  
input of at least 15W.  
Connect the ends of the cables to the SPEAKER terminals as shown  
below. Connect the leads to the SPEAKER terminals of the same  
polarity.  
L
R
SPEAKER R terminal  
SPEAKER L terminal  
To external speaker (right) To external speaker (left)  
Make sure to connect the speaker jack and cable polarity ( , ) properly.  
■
The speaker terminals have plus and minus polarity.  
The cables are also divided into plus and minus.  
When connecting the left/right speakers, be sure to connect the plus/minus jacks with the correct cables.  
CAUTION  
• Connect the speaker wires to the speakers first, then to the unit.  
• Use speakers with an impedance of 4 ohm as lower impedance speakers can damage the unit.  
• Do not mistake the right and the left channels. The right speaker is the one on the right side when you face  
the unit.  
• Do not let the bare speaker wires touch each other.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE  
When transporting the LCD Monitor  
Transporting the LCD Monitor requires special skill that should only be performed by qualified service  
personnel. Customers should not attempt to do the work themselves.  
Before turning on the LCD Monitor  
Connect the AC plug for the LCD Monitor into  
the AC outlet.  
Push and turn ON the main POWER on the  
rear of the LCD Monitor.  
1
2
• Be sure to turn OFF the main POWER on the rear  
of the LCD Monitor when connecting the cord.  
Fix the AC cord as shown below.  
Main  
POWER  
1
Press POWER on the side of the LCD Monitor.  
3
2
3
POWER  
AC outlet  
4
The POWER indicator on the front of the LCD  
Monitor lights BLUE.  
• Place the LCD Monitor close to the AC outlet, and  
keep the power plug within reach.  
• Do not use an AC cord other than the one supplied  
with the monitor.  
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT  
TOUCH UN-INSULATED PARTS OF ANY CABLES  
WITH THE AC CORD CONNECTED.  
• It is recommended to prepare a dedicated power  
line for the LCD Monitor.  
POWER indicator  
• LCD Monitor angle cannot be adjusted.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE  
If the remote control fails to operate LCD Monitor functions, replace the batteries in the remote control unit.  
1 Open the battery cover.  
2 Insert two R-6 (“AA” size) batteries  
(supplied with the product).  
3 Close the battery cover.  
• Place the batteries with their terminals corresponding to  
the (+) and (-) indications in the battery compartment.  
CAUTION  
Use manganese or alkaline batteries only.  
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.  
• Do not mix batteries of different types. Different types of batteries have different characteristics.  
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause  
chemical leakage in old batteries.  
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin  
can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.  
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.  
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.  
• Never attempt to charge non-rechargeable batteries.  
Using the Remote Control Unit  
Use the remote control unit by pointing it towards the remote control sensor on the LCD Monitor. Objects  
between the remote control unit and the remote control sensor may prevent proper operation.  
Cautions regarding the remote control unit  
■
• Do not expose the remote control unit to shock. In  
addition, do not expose the remote control unit to  
liquids, and do not place in an area with high humidity.  
• Do not install or place the remote control unit under  
direct sunlight. The heat may cause deformation of the  
remote control unit.  
• The remote control unit may not work properly if the  
remote control sensor on the LCD Monitor is under  
direct sunlight or strong lighting. In such cases, change  
the angle of the lighting or the LCD Monitor, or operate  
the remote control unit closer to the remote control  
sensor.  
Remote control sensor  
10º  
10º  
5 m  
10º  
10º  
The POWER indicator on the LCD Monitor should light BLUE indicating you have  
power to the LCD Monitor.  
If the POWER indicator on the LCD Monitor still does not light up, press POWER on  
the remote control to turn the power on.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
IMPORTANT INFORMATION................................1  
Trademarks...........................................................3  
DEAR SHARP CUSTOMER ..................................4  
IMPORTANT SAFETY INSTRUCTIONS...............4  
Supplied Accessories..........................................7  
QUICK REFERENCE.............................................7  
Installing the LCD Monitor onto a Stand ...........7  
Installing the LCD Monitor on a Wall.................7  
Connecting External Speakers .........................8  
Using the Remote Control Unit .......................10  
Part Names..........................................................12  
LCD Monitor (Front)........................................12  
LCD Monitor (Rear/Side) ................................12  
Remote Control Unit .......................................13  
Preparation..........................................................14  
Connecting Audiovisual Equipment ................14  
Using Digital Audio Output..............................15  
Connecting HDMI Equipment .........................15  
Connecting a PC.............................................16  
PC Compatibility Chart....................................16  
Turning On/Off the Power..................................17  
Initial Setup.........................................................17  
Direct Button Operation.....................................18  
Changing Volume......................................18  
MUTE ........................................................18  
Sleep Timer...............................................18  
INPUT........................................................19  
AV MODE..................................................19  
VIEW MODE .............................................20  
On-Screen Display Menu...................................21  
Menu Items .....................................................21  
On-Screen Display Menu Operation...............22  
Menu Operation Buttons.................................22  
Picture Menu...................................................23  
OPC Setting ..............................................23  
Advanced Picture Setting..........................23  
Audio Menu.....................................................24  
Surround....................................................24  
Power Control Menu .......................................25  
No Signal Off.............................................25  
No Operation Off .......................................25  
Setup Menu.....................................................25  
EZ Setup ...................................................25  
Input Skip ..................................................25  
Input Label.................................................25  
Input Signal  
Option Menu ...................................................27  
Audio Only.................................................27  
Input Select ...............................................27  
HDMI Setup...............................................27  
Output Select.............................................27  
Color System.............................................27  
Game Play Time........................................27  
Operation Lock Out ...................................27  
Appendix .............................................................28  
Troubleshooting ..............................................28  
RS-232C Port Specifications ..........................29  
Specifications..................................................30  
Information on the Software License for  
This Product.................................................31  
Dimensional Drawings  
• The dimensional drawings for the LCD Monitor are  
shown on the inside back cover.  
(for Analog PC Input Mode Only) ...........26  
Auto Sync. Adjustment  
(for Analog PC Input Mode Only) ...........26  
Fine Sync. Adjustment ..............................26  
Position......................................................26  
Language ..................................................26  
Identification ..............................................26  
Reset.........................................................26  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Names  
LCD Monitor (Front)  
Remote control sensor  
OPC sensor (See page 23.)  
OPC indicator (See page 23.)  
SLEEP indicator (See page 18.)  
POWER indicator (See page 17.)  
LCD Monitor (Rear/Side)  
POWER button  
INPUT 4 terminal  
(HDMI)  
MENU button  
INPUT button  
Select buttons  
INPUT 5 terminal  
(HDMI)  
INPUT 3  
terminals  
INPUT 6 terminals  
(HDMI)  
(SELECT  
/
)
Volume buttons  
(VOL  
INPUT 7 terminals  
(DVI)  
/
)
DIGITAL AUDIO  
OUTPUT terminal  
Unused  
AC INPUT  
terminal  
INPUT 1 terminals  
OUTPUT terminals  
INPUT 2 terminals RS-232C terminal  
SPEAKER terminals  
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual  
operations.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Names  
1
2
POWER: Switch the LCD Monitor power on or enters  
standby. (See page 17.)  
INPUT: Select an LCD Monitor input source. (INPUT  
1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6,  
INPUT 7) (See page 19.)  
SLEEP: Set the sleep timer. (See page 18.)  
RETURN: Return to the previous menu screen.  
AV MODE: Select an audio or video setting.  
(When the input source is INPUT 1, 2 or 3:  
STANDARD, MOVIE, GAME, USER,  
DYNAMIC (Fixed), DYNAMIC. When the input  
source is INPUT 4, 5, 6 or 7: STANDARD, MOVIE,  
GAME, PC, USER, DYNAMIC (Fixed), DYNAMIC)  
(See page 19.)  
Remote Control Unit  
7
8
9
3
4
5
1
2
3
4
6
7
8
9
DISPLAY: Display the INPUT information.  
MUTE: Mute the sound. (See page 18.)  
10  
11  
VOL  
MENU: Display the menu screen.  
, ENTER: Select a desired item on  
/
: Set the volume. (See page 18.)  
10  
/
/
/
5
6
the screen.  
11 VIEW MODE: Select the screen size. (See page 20.)  
• When using the remote control unit, point it at the LCD  
Monitor.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
You can connect many types of external equipment to your LCD Monitor like a Blu-ray disc player, DVD  
player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source  
images, select the input source from INPUT on the remote control unit or on the LCD Monitor. (See page  
19.)  
CAUTION  
• To protect equipment, always turn off the LCD Monitor before connecting any external equipment.  
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.  
Connecting Audiovisual Equipment  
You can use the INPUT 1, INPUT 2, INPUT 3 or INPUT 7 terminals when connecting to a Blu-ray disc  
player, DVD player, VCR, game console, and camcorder.  
When using composite cable (INPUT 2 or 3):  
Blu-ray disc player/DVD player/VCR/  
Game console/Camcorder  
AV cable  
(commercially available)  
When using component cable (INPUT 1 or 3):  
Blu-ray disc player/DVD player  
Component video cable  
(commercially available)  
Audio cable  
(commercially available)  
To connect to the D-video output terminal, use a D terminal-  
BNC component conversion cable (commercially available).  
• The INPUT 1 and INPUT 3 terminals are different in shape. Use a BNC-type component cable for the INPUT 1  
terminals. For the INPUT 3 terminals, use an RCA-type component cable.  
When using S-VIDEO cable (INPUT 2):  
VCR/Game console/  
Camcorder  
S-VIDEO cable  
(commercially available)  
AUDIO cable  
(commercially available)  
• The S-VIDEO terminal takes priority over the video terminals. (INPUT 2 only)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
When using DVI Cable (INPUT 7):  
Blu-ray disc player/DVD player  
DVI cable  
(commercially available)  
Ø 3.5 mm stereo minijack cable  
(commercially available)  
• To enjoy 1080p display capability, connect your external equipment using a component or DVI cable and set the  
equipment to 1080p output.  
Using Digital Audio Output  
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. PCM audio outputs from the  
terminal.  
To optical digital input of  
external audio devices  
Optical fiber cable  
(commercially available)  
• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI  
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.  
Connecting HDMI Equipment  
You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.  
HDMI-certified cable*  
(commercially available)  
HDMI equipment  
• When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.  
• To enjoy 1080p display capability, connect your Blu-ray disc player or other external equipment using an HDMI-  
certified cable and set the equipment to 1080p output.  
* Use a commercially-available HDMI cable complying with HDMI standards. Using a non-standard cable will not  
function normally, resulting in video not being shown or sound not being produced.  
* Set the player not to use the HDMI CEC function such as AQUOS LINK. Using the HDMI CEC function may cause  
malfunction.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Connecting a PC  
When connecting to a PC with a DVI terminal (INPUT 7):  
RGB/DVI conversion cable  
(commercially available)  
Ø 3.5 mm stereo minijack cable  
(commercially available)  
PC  
When connecting to a PC with an HDMI terminal (INPUT 4, 5 or 6):  
HDMI-certified cable  
(commercially available)  
PC  
• The HDMI terminals only support digital signal.  
• If you are connecting the LCD Monitor to a PC with a DVI terminal, use a DVI cable (commercially available) instead  
of a RGB/DVI conversion cable.  
PC Compatibility Chart  
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 26 to set PC input  
signals.  
PC  
Resolution  
720 x 400  
Horizontal Frequency Vertical Frequency  
VESA Standard  
31.5 kHz  
70 Hz  
31.5 kHz  
37.9 kHz  
37.5 kHz  
35.1 kHz  
37.9 kHz  
48.1 kHz  
46.9 kHz  
48.4 kHz  
56.5 kHz  
60.0 kHz  
47.7 kHz  
64.0 kHz  
65.3 kHz  
75.0 kHz  
37.5 kHz  
45.0 kHz  
28.1 kHz  
33.8 kHz  
56.3 kHz  
67.5 kHz  
60 Hz  
72 Hz  
75 Hz  
56 Hz  
60 Hz  
72 Hz  
75 Hz  
60 Hz  
70 Hz  
75 Hz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
50 Hz  
60 Hz  
50 Hz  
60 Hz  
50 Hz  
60 Hz  
O
O
O
O
O
O
O
O
O
O
O
O
O
O
VGA  
640 x 480  
800 x 600  
1024 x 768  
SVGA  
XGA  
PC  
WXGA  
SXGA  
SXGA+  
UXGA  
1360 x 768  
1280 x 1024  
1400 x 1050  
1600 x 1200  
720p  
1080i  
1080p  
1280 x 720  
1920 x 1080  
1920 x 1080  
DDC is a registered trademark of Video Electronics Standards Association.  
VGA and XGA are registered trademarks of International Business Machines Corp.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning On/Off the Power  
Press POWER on the LCD Monitor, or POWER on the remote  
control unit to turn the power on.  
• POWER indicator (Blue): The LCD Monitor is on. (After a few seconds,  
a window appears with sound.)  
POWER  
• The initial setup starts when the LCD Monitor powers on for the first  
time. If the LCD Monitor has been turned on before, the initial setup will  
not be invoked. For changing the settings of the initial setup, perform  
EZ setup on the Setup menu on page 25.  
• When the main POWER is off, you cannot turn on the LCD Monitor by  
pressing POWER.  
Press POWER on the LCD Monitor, or POWER on the remote  
control unit again to turn the power off.  
• The LCD Monitor enters standby and the image on the screen  
POWER  
(On/Standby)  
disappears.  
• The POWER indicator on the LCD Monitor turns off.  
• If you ar  
e not going to use this LCD Monitor for a long period of time, be  
sure to remove the AC cord from the AC outlet.  
• Weak electric power is still consumed even when the LCD Monitor is  
turned off.  
Initial Setup  
When you turn on the LCD Monitor for the first time,  
initial setup menu screen will appear. Set desired  
“Language” and “Monitor Location”.  
Language (Language setting)  
Press to select the desired language  
/
1
listed on the screen, and then press ENTER.  
Language  
Monitor Location  
English  
Français  
Español  
Monitor Location  
Select “Home” or “Store” for the location where you  
plan to install the LCD Monitor.  
Press  
/
to select “Home” or “Store”.  
2
Press ENTER to enter the setting.  
Example  
Language  
Monitor Location  
Home  
Store  
• If you select “Home”, AV MODE is set to “STANDARD”.  
• If you select “Store”, AV MODE is set to  
“DYNAMIC (Fixed)”.  
If there is no operation for 30 minutes, AV MODE will  
return to “DYNAMIC (Fixed)” automatically, regardless  
of previous changes to the AV MODE settings.  
• For changing the Monitor Location after the setting,  
see “EZ Setup” on page 25.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Direct Button Operation  
Changing Volume  
You can change the volume by pressing VOL  
/
on the LCD Monitor or on the remote control unit.  
• To increase the volume, press VOL  
.
• To decrease the volume, press VOL  
.
20  
Audio status  
Output Select  
Output device  
Fixed  
Variable sound  
Variable  
Mute  
Speaker  
• When “Output Select” is set to “Variable”, the indicator  
on the screen changes as shown below.  
60  
• See page 27 for details on the Output Select function.  
MUTE  
Mutes the current sound output.  
Press MUTE.  
• “ ” will be displayed on the screen for 30 minutes,  
and the sound is silenced.  
• Within 30 minutes of pressing MUTE, mute can be  
canceled by using one of the methods below.  
- Mute will be canceled if you press VOL  
/
or  
MUTE.  
• Mute will be canceled after 30 minutes have  
passed. However, the LCD Monitor will not suddenly  
output a loud sound as the volume level is set to 0  
automatically.  
Sleep Timer  
Allows you to set a time when the LCD Monitor  
automatically switches to standby.  
Press SLEEP.  
• The remaining time displays when the sleep timer has  
been set.  
• Each time you press SLEEP, the remaining time  
switches as shown below.  
Off  
30  
60  
90  
120  
• When set, the time automatically starts counting down.  
• If you want to adjust the sleep timer, you can press  
SLEEP twice then change the time setting.  
• Five minutes before the time expires, the remaining  
time displays every minute.  
• Select “Off” by pressing SLEEP to cancel the sleep  
timer.  
• The LCD Monitor will enter standby when the  
remaining time reaches zero.  
• When the sleep timer is set, its indicator on the LCD  
Monitor lights red.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Direct Button Operation  
INPUT  
AV MODE  
To view external source images, select the input  
source using INPUT on the remote control unit or  
on the LCD Monitor.  
AV MODE gives you several viewing options  
to choose from to best match the surrounding  
environment of the LCD Monitor, type of program  
watched or the type of image input from external  
equipment.  
Press INPUT.  
1
• A list of selectable sources appears.  
Press INPUT again or press  
the input source.  
• An image from the selected source automatically  
displays.  
• Each time INPUT is pressed, the input source  
toggles.  
• If the corresponding input is not plugged in, you  
cannot change the input. Be sure to connect the  
equipment beforehand.  
/
to select  
Press AV MODE.  
2
• Current AV MODE displays.  
• Press AV MODE again before the mode displayed on  
the screen disappears. The mode changes as shown  
below:  
Example:  
When the input source is INPUT 1, 2 or 3  
terminals  
STANDARD  
DYNAMIC  
Example:  
MOVIE GAME  
USER [  
]
DYNAMIC (Fixed)  
• See pages 14 to 16 for external equipment connection.  
When the input source is INPUT 4, 5, 6 or 7  
terminals  
STANDARD  
DYNAMIC  
MOVIE  
GAME  
PC  
DYNAMIC (Fixed)  
USER [  
]
STANDARD: For a normal screen.  
[Enhanced Picture Contrast: on]  
MOVIE: For a movie.  
[Enhanced Picture Contrast: off]  
GAME: Lowers image brightness for easier viewing.  
[Enhanced Picture Contrast: off]  
PC: For PC.  
[Enhanced Picture Contrast: off]  
USER: Allows the user to customize settings as  
desired. You can set the mode for each input  
source.  
[Enhanced Picture Contrast: off]  
DYNAMIC (Fixed): Changes the image and  
sound settings to the factory preset values. No  
adjustments are allowed.  
[Enhanced Picture Contrast: on]  
DYNAMIC: For a clear-cut image emphasizing high  
contrast, useful for sports viewing.  
[Enhanced Picture Contrast: on]  
• You can select a different AV MODE item for each  
input mode. (For example, select STANDARD for  
INPUT 1 and DYNAMIC for INPUT 2.)  
• When you play games, “GAME” is recommended for  
AV MODE.  
• “Enhanced Picture Contrast” technology detects the  
source video characteristics and smoothly adjusts the  
screen brightness accordingly to realize deeper black  
levels.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Direct Button Operation  
VIEW MODE  
You can select the screen size.  
Press VIEW MODE.  
• The View Mode menu displays.  
1
• The menu lists the View Mode options selectable for the type of video signal currently being received.  
Press VIEW MODE or  
• You can sequentially select a View Mode that has its own aspect ratio.  
/
while the View Mode menu is displayed to select a desired item on the menu.  
2
For 4:3 programs  
■
Example: Screen size images  
Side Bar  
S.Stretch (Smart stretch)  
Zoom  
Stretch  
Suitable for viewing  
conventional 4:3 programs 4:3 programs to fill the  
in their normal format. screen.  
Suitable for stretching  
Suitable for viewing wide-  
screen 2.35:1 anamorphic DVDs. When viewing 1.85:1  
DVDs in full screen.  
This mode is useful for 1.78:1  
DVDs, stretch mode will still  
show very thin black bands at  
the top and bottom of the screen.  
For HD programs  
■
Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program.  
Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of  
pixels on the screen.  
Full Screen (720p only): You can select “Full Screen” only when receiving a 720p signal.  
S.Stretch (Smart stretch): Suitable for stretching 4:3 programs to fill the screen.  
Zoom: Suitable for viewing wide-screen 2.35:1 aspect-ratio programs in full screen.  
• When using Dot by Dot, it is possible to see noise or bars around different outer portions of the screen. Please  
change view mode to correct this.  
For PC input mode  
■
• Connect the PC before making adjustments. (See page 16.)  
• Selectable screen size may vary with input signal type.  
Example: Screen size images  
Input signal  
Normal  
Zoom  
Stretch  
Dot by Dot  
4:3  
Keeps the original  
aspect ratio in a  
full screen display. programs. The top  
and bottom of the  
For viewing  
widescreen  
An image fully fills  
the screen.  
Detects the resolution  
of the signal and  
displays an image  
with the same  
image is cropped.  
number of pixels on  
the screen.  
Input signal  
Normal  
Stretch  
Dot by Dot  
16:9  
Keeps the original  
aspect ratio in a  
full screen display.  
An image fully fills  
the screen.  
Detects the resolution  
of the signal and  
displays an image  
with the same  
number of pixels on  
the screen.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
Menu Items  
For INPUT 1/2/3 Mode  
For HDMI/DVI Mode  
Picture Menu  
Picture Menu  
OPC...............................................................................Page 23  
Backlight........................................................................Page 23  
Contrast ........................................................................Page 23  
Brightness .....................................................................Page 23  
Color .............................................................................Page 23  
Tint ................................................................................Page 23  
Sharpness ....................................................................Page 23  
Advanced  
OPC...............................................................................Page 23  
Backlight........................................................................Page 23  
Contrast ........................................................................Page 23  
Brightness .....................................................................Page 23  
Color .............................................................................Page 23  
Tint ................................................................................Page 23  
Sharpness ....................................................................Page 23  
Advanced  
C.M.S.-Hue .........................................................Page 23  
C.M.S.-Saturation ...............................................Page 23  
Color Temp. ........................................................Page 23  
Quick Shoot ........................................................Page 23  
Active Contrast....................................................Page 23  
I/P Setting............................................................Page 24  
Film Mode ...........................................................Page 24  
Digital Noise Reduction.......................................Page 24  
3D-Y/C ................................................................Page 24  
Monochrome .......................................................Page 24  
Range of OPC ....................................................Page 24  
Reset ............................................................................Page 23  
C.M.S.-Hue .........................................................Page 23  
C.M.S.-Saturation ...............................................Page 23  
Color Temp. ........................................................Page 23  
Quick Shoot ........................................................Page 23  
Active Contrast....................................................Page 23  
I/P Setting............................................................Page 24  
Film Mode ...........................................................Page 24  
Digital Noise Reduction.......................................Page 24  
Monochrome .......................................................Page 24  
Range of OPC ....................................................Page 24  
Reset ............................................................................Page 23  
Audio Menu  
Audio Menu  
Treble ...........................................................................Page 24  
Bass...............................................................................Page 24  
Balance..........................................................................Page 24  
Surround........................................................................Page 24  
Reset ............................................................................Page 24  
Treble ...........................................................................Page 24  
Bass...............................................................................Page 24  
Balance..........................................................................Page 24  
Surround........................................................................Page 24  
Reset ............................................................................Page 24  
Power Control Menu  
Power Control Menu  
No Signal Off.................................................................Page 25  
No Operation Off ...........................................................Page 25  
No Signal Off.................................................................Page 25  
No Operation Off ...........................................................Page 25  
Setup Menu  
Setup Menu  
EZ Setup........................................................................Page 25  
Input Skip.......................................................................Page 25  
Input Label ....................................................................Page 25  
Position..........................................................................Page 26  
Language.......................................................................Page 26  
Identification ..................................................................Page 26  
Reset.............................................................................Page 26  
EZ Setup........................................................................Page 25  
Input Skip.......................................................................Page 25  
Input Label ....................................................................Page 25  
Input Signal....................................................................Page 26  
Auto Sync. ....................................................................Page 26  
Fine Sync. .....................................................................Page 26  
Position..........................................................................Page 26  
Language.......................................................................Page 26  
Identification ..................................................................Page 26  
Reset.............................................................................Page 26  
Option Menu  
Option Menu  
Audio Only.....................................................................Page 27  
Input Select....................................................................Page 27  
Output Select.................................................................Page 27  
Color System.................................................................Page 27  
Game Play Time............................................................Page 27  
Operation Lock Out .......................................................Page 27  
Audio Only.....................................................................Page 27  
Input Select....................................................................Page 27  
HDMI Setup...................................................................Page 27  
Output Select.................................................................Page 27  
Game Play Time............................................................Page 27  
Operation Lock Out .......................................................Page 27  
• Some menu items may not be displayed depending on the selected input source.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
On-Screen Display Menu Operation  
Example  
Example  
Option  
Picture  
Audio Only  
Input Select  
[VIDEO]  
[Fixed]  
[Auto]  
[Off]  
OPC  
Off  
On  
On : Display  
+16  
Output select  
Backlight  
Contrast  
Brightness  
Color  
[+12] -16  
Color System  
[+30]  
0
+40  
+30  
+30  
+30  
+10  
Game Play Time  
Operation Lock Out  
[
[
[
0] -30  
0] -30  
0] -30  
[Off]  
Tint  
Sharpness [ +2] -10  
Advanced  
Item displayed in yellow  
• This indicates the item currently selected.  
• Press ENTER to go to the adjustment screen for  
this item.  
Reset  
Item in brackets  
• This indicates the current setting for the item.  
Item displayed in white  
• This indicates that the item can be selected.  
ENTER  
RETURN  
MENU  
: Select  
: Enter  
: Back  
: Exit  
Item displayed in gray  
• This indicates that the item cannot be selected.  
There are various reasons why the items cannot be  
selected, but the main reasons are as follows:  
—Nothing is connected to the selected input terminal.  
—The function is not compatible with the current  
input signal.  
The bar above is an operational guide for  
the remote control. The bar will change in  
accordance with each menu setting screen.  
Press  
Press  
Press  
/
to select the desired item.  
to select the desired item.  
to adjust the item.  
/
/
• Menu options differ in the selected input modes, but  
the operating procedures are the same.  
• The screens in the operation manual are for  
explanation purposes (some are enlarged, others  
cropped) and may vary slightly from the actual screens.  
Menu Operation Buttons  
Using the remote control  
Use the following buttons on the remote control to  
operate the menu.  
Using the control panel of the main unit  
You can also operate the menu with the control  
panel of the main unit.  
Button operations on the control panel correspond  
to the ones on the remote control as shown below.  
MENU: MENU on the remote  
control.  
INPUT: ENTER on the remote  
control.  
SELECT  
/
:Cursor  
/
on the remote  
control.  
VOL  
/
: Cursor  
the remote control.  
/
on  
MENU:  
Press to open or close the menu screen.  
/ / / : Press to select a desired item on the screen  
or adjust a selected item.  
ENTER:  
Press to go to the next step or complete the  
setting.  
RETURN: Press to return to the previous step.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
Picture Menu  
• When set to “On”, the OPC senses the surrounding  
light and automatically adjusts the backlight brightness.  
Make sure nothing obstructs the OPC sensor, which  
could affect its ability to sense surrounding light.  
• When set to “On: Display”, OPC effect displays on the  
screen while the OPC adjusts the screen brightness.  
• When set to “On” or “On: Display”, the OPC indicator  
on the LCD Monitor lights green.  
Adjusts the picture to your preference with the  
following picture settings.  
Example  
Picture  
OPC  
Off  
On  
On : Display  
+16  
Advanced Picture Setting  
This LCD Monitor provides various advanced  
functions for optimizing the picture quality.  
Backlight  
Contrast  
Brightness  
Color  
[+12] -16  
[+30]  
0
+40  
+30  
+30  
+30  
+10  
[
[
[
0] -30  
0] -30  
0] -30  
C.M.S.  
(Color Management System)  
Tint  
Color tone is managed using the six-color  
adjustment setting.  
Sharpness [ +2] -10  
Advanced  
C.M.S.-Hue: This is a standard to adjust the color  
either more reddish or more bluish in tone.  
C.M.S.-Saturation: Increases or decreases the  
saturation of a selected color.  
Reset  
Press MENU to display the MENU screen, and  
then press  
1
2
/
to select “Picture”.  
Press  
item.  
/
to select a specific adjustment  
• For resetting all adjustment items to the factory preset  
values, press  
/
to select “Reset”, and then press  
• Select “Advanced” and then press ENTER to set  
“C.M.S. -Hue”, “C.M.S.-Saturation”, “Color Temp.”,  
“Quick Shoot”, “Active Contrast”, “I/P Setting”,  
“Film Mode”, “Digital Noise Reduction”, “3D-Y/C”,  
“Monochrome” or “Range of OPC”.  
ENTER.  
Color Temp.  
(Color Temperature)  
For a better white balance, use color temperature  
correction.  
Press  
/
(or  
/
) to select the desired  
3
4
setting, and then press ENTER.  
Press MENU to exit.  
High:  
White with bluish tone  
Mid-High:  
Middle:  
Mid-Low:  
Low:  
Selected item  
Backlight  
button  
button  
The screen dims The screen  
brightens  
White with reddish tone  
Contrast  
Brightness  
For less contrast For more contrast  
White balance can be adjusted between a  
maximum of +30 and a minimum of –30 for each  
color temperature.  
For less  
brightness  
For more  
brightness  
R Gain: –30 through +30  
Color  
For less color  
intensity  
For more color  
intensity  
G Gain: –30 through +30  
B Gain: –30 through +30  
Tint  
Skin tones  
Skin tones  
become reddish  
become greenish  
Sharpness  
For less  
sharpness  
For more  
sharpness  
• For resetting all adjustment items to the factory preset  
values, press  
/
to select “Reset”, and then press  
• For resetting all Picture adjustment items to the factory  
preset values, press  
to select “Reset”, press  
to select “Yes”, and then press  
ENTER.  
/
Quick Shoot  
ENTER, press  
/
ENTER.  
Use Quick Shoot operation to view fast-action video  
more clearly.  
OPC Setting  
On: Quick Shoot function is on.  
Off: Normal viewing mode.  
Automatically adjusts the brightness of the screen.  
Off: The brightness is fixed at the value set in  
“Backlight”.  
On: Automatically adjusts.  
On: Display: Displays the OPC effect on the screen  
while adjusting the brightness of the screen.  
• Quick Shoot may cause image noise. If this occurs turn  
the function “Off”.  
Active Contrast  
Automatically adjusts the image contrast according  
to the scene.  
On: Automatically adjusts the image contrast.  
Off: No adjustment.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
I/P Setting  
Audio Menu  
Converts input signals depending on the type of  
You can adjust the sound quality to your preference  
with the following settings.  
Example  
images.  
Fast: Suitable for fast-moving images  
Slow: Suitable for smooth images with low amounts  
of flickers  
Audio  
• “I/P Setting” is not selectable when channel display  
shows an input resolution of 480P, 720P, or 1080P.  
Treble  
Bass  
[ 0]  
[ 0]  
[ 0]  
-15  
-15  
L
+15  
+15  
R
Film Mode (3:2 pull-down)  
Balance  
Surround  
Reset  
Automatically detects a film-based source (originally  
encoded at 24 frames/second), analyzes it then  
recreates each still film frame for high-definition  
[Off]  
picture quality.  
On: Detects, analyzes, converts film source.  
Off: Normal viewing mode.  
Press MENU to display the MENU screen, and  
1
2
then press  
/
to select “Audio”.  
Press  
item.  
/
to select a specific adjustment  
• “Film Mode” does not function when you set the “AV  
Mode” to “Game”.  
• “Film Mode” is not selectable when channel display  
shows an input resolution of 480P, 720P, or 1080P.  
• Select “Surround” and then press ENTER to set  
the item.  
Press  
/
(or  
/
) to select the desired  
3
4
Digital Noise Reduction  
setting, and then press ENTER.  
Press MENU to exit.  
Produces a clearer video image.  
Off: No adjustment  
High: For enhanced Digital Noise Reduction  
Low: For moderate Digital Noise Reduction  
Selected item  
button  
button  
Treble  
Bass  
For weaker treble For stronger treble  
For weaker bass For stronger bass  
3D-Y/C  
Balance  
Decrease audio  
from the right  
speaker  
Decrease audio  
from the left  
speaker  
Provides high quality images with minimal dot crawl  
and cross color noise.  
Slow: For still images.  
Standard: Normal adjustment.  
Fast: For moving images.  
Off (2D): For Game Mode.  
• Audio menu is grayed out when Output Select is set to  
“Variable”.  
• For resetting all Audio adjustment items to the factory  
• 3D-Y/C is available for input signal from Composite  
Video.  
preset values, press  
/
to select “Reset”, press  
ENTER, press  
/
to select “Yes”, and then press  
Monochrome  
ENTER.  
For viewing a video in monochrome.  
Surround  
On: For viewing in monochrome.  
Off: Normal color.  
Surround function allows you to enjoy realistic “live”  
sound.  
Range of OPC  
On: Surround function is on.  
The brightness level range of the OPC sensor’s  
automatic adjustments can be set according to your  
preferences.  
Off: Normal sound.  
• Audio menu is grayed out when Output Select is set to  
“Variable”.  
• For some discs, setup may be required on your DVD  
player. In this case, please refer to the operation  
manual of your DVD player.  
The adjustment range of the OPC sensor can be  
set to a maximum of +16 and a minimum of –16.  
Max.: –15 through +16  
Min.: –16 through +15  
• The range of OPC settings are active only when the  
OPC is set to “On”.  
• The maximum setting cannot be set to a smaller  
number than the minimum setting.  
• The minimum setting cannot be set to a bigger number  
than the maximum setting.  
• Depending on the brightness of the surrounding light,  
the OPC sensor might not operate if the adjustment  
range is small.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
Power Control Menu  
Setup Menu  
Power control setting allows you to save energy.  
Example  
Example  
Setup  
Power Control  
EZ Setup  
Input Skip  
Position  
[Disable]  
[Disable]  
No Signal Off  
No Operation Off  
[English]  
Language  
Identification  
Reset  
Press MENU to display the MENU screen, and  
1
2
3
4
then press  
Press  
Operation Off”, and then press ENTER.  
/
to select “Power Control”.  
/
to select a “No Signal Off” or “No  
Press MENU to display the MENU screen, and  
1
2
3
4
Press  
/
to select “Enable”, and then press  
then press  
Press  
item, and then press ENTER.  
Press (or ) to select the desired  
/
to select “Setup”.  
ENTER.  
/
to select a specific adjustment  
Press MENU to exit.  
No Signal Off  
/
/
setting, and then press ENTER.  
When set to “Enable”, the power will automatically  
shut down if there is no signal for 15 minutes.  
Press MENU to exit.  
EZ Setup  
• Five minutes before the power shuts down, the  
remaining time displays every minute.  
• “Disable” is the factory preset value.  
• You can view TV broadcasts on the LCD Monitor if you  
use external equipment such as a TV tuner. Be aware  
that the “No Signal Off” function may not work even  
when the TV program you are viewing finishes.  
This function allows you to change the preset  
values.  
Language: Select from among 4 languages (English,  
German, French and Spanish).  
Monitor Location: Select “Home” or “Store” for the  
location where you plan to install the LCD Monitor.  
• If you select “Home”, AV MODE is set to  
“STANDARD”.  
No Operation Off  
When set to “Enable”, the power will automatically  
• If you select “Store”, AV MODE is set to  
“DYNAMIC (Fixed)”.  
shut down if there is no operation for 3 hours.  
• See “Initial Setup” on page 17 for setting each item.  
• Five minutes before the power shuts down, the  
remaining time displays every minute.  
• “Disable” is the factory preset value.  
Input Skip  
This setting allows you to skip the HDMI or PC-IN  
Input (“Input 4”, “Input 5”, “Input 6” and “Input 7”) on  
the Input Selection operation.  
Yes: Skips the input.  
No: Does not skip input.  
Input Label  
Lets you set the input terminal displayed when  
using the INPUT SOURCE menu. Press  
/
/
/
to select the new name for the input  
mode.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
Input Signal  
Position  
(for Analog PC Input Mode Only)  
For adjusting a picture’s horizontal and vertical  
position.  
Some input signals may have to be registered  
manually to display properly. The pair of input  
signals (resolutions) in the list below is not  
distinguishable when received. In such a case,  
you have to set the correct signal manually. After  
setting once, it will display when the same signal  
(resolution) is input again.  
H-Pos.: Centers the image by moving it to the left or  
right.  
V-Pos.: Centers the image by moving it up or down.  
• For resetting adjustments to the factory preset values,  
press  
/
to select “Reset”, and then press  
ENTER.  
1024 x 768  
1360 x 768  
• When connecting a PC to the HDMI terminal, the  
image position will be automatically adjusted. It cannot  
be manually adjusted.  
• The screen position variable ranges depend on the  
View Mode or the signal type.  
• You can only select the “Input Signal” on the Setup  
menu when receiving one of the 2 input signals listed  
above.  
• Adjustments are stored separately according to input  
source.  
Auto Sync. Adjustment  
Language  
(for Analog PC Input Mode Only)  
You can also select a language from the Setup  
menu. Select from among 4 languages: English,  
German, French and Spanish.  
For automatically adjusting the PC image.  
Yes: Auto Sync. starts and “Now adjusting the  
image.” displays.  
No: This function does not work.  
Identification  
The current version of the LCD Monitor software is  
displayed on the top.  
The approximate total use time of the backlight is  
displayed on the bottom (in the unit of 500 hours).  
Use this value as a reference to determine the time  
of backlight replacement.  
• When Auto Sync. is successful, “Completed” displays.  
If not, Auto Sync. failed.  
• Auto Sync. may fail even if “Completed” displays.  
• Auto Sync. may fail if the computer image has low  
resolution, has unclear (black) edges, or is moved  
while executing Auto Sync.  
• Be sure to connect the PC to the LCD Monitor and  
switch it on before starting Auto Sync.  
• The use time includes the use for factory inspection  
conducted before shipment.  
Fine Sync. Adjustment  
Ordinarily you can easily adjust the picture as  
necessary to change image position using Auto  
Sync. In some cases, however, manual adjustment  
is needed to optimize the image.  
Reset  
If complex adjustments are made and the settings  
cannot be restored to normal, you can reset the  
settings to the factory preset values.  
H-Pos.: Centers the image by moving it to the left or  
“Return to the factory preset values” displays  
on the screen.  
right.  
1
V-Pos.: Centers the image by moving it up or down.  
Clock: Adjust when the image flickers with vertical  
stripes.  
Phase: Adjust when characters have low contrast or  
when the image flickers.  
Select “Yes”.  
2
• “Now, Monitor will restart automatically. OK?”  
displays on the screen.  
Select “Yes”.  
3
• “Now initializing...” displays on the screen and  
blinks. After the reset has been completed, the  
power shuts off and then comes back on. The  
screen will have returned to its original settings.  
• For resetting all Fine Sync. adjustment items to the  
factory preset values, press  
/
to select “Reset”,  
and then press ENTER.  
• It is not necessary to adjust the “Clock” or “Phase”  
when a digital signal is being input, so it cannot be  
selected.  
• The Language settings will not be changed.  
• The default cursor position may not be in the center,  
because the screen position variable ranges may be  
asymmetrical.  
• The Monitor Location settings will not be changed.  
• The screen position variable ranges depend on the  
View Mode or the signal type.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
Auto View:  
Option Menu  
Enable: To use View Mode based on signal  
recognition, including an HDMI signal.  
Disable: No function.  
Example  
Option  
Audio Select:  
Audio Only  
Digital: For an audio signal via the HDMI terminal.  
Analog: For an audio signal via the L/R Audio  
Terminals (INPUT 6).  
Output Select  
[Fixed]  
[Off]  
Game Play Time  
Operation Lock Out  
[Off]  
• Refer to your external equipment operation manual for  
the signal type.  
• “Audio Select” is only available for INPUT 6.  
• When connecting an HDMI-DVI conversion adapter/  
cable to the HDMI terminal, the image may not come  
in clearly.  
Press MENU to display the MENU screen, and  
1
2
3
4
then press  
Press  
item and then press ENTER.  
Press (or ) to select the desired  
/
to select “Option”.  
/
to select a specific adjustment  
/
/
Output Select  
setting, and then press ENTER.  
Press MENU to exit.  
Allows you to select what controls the audio output.  
Fixed: Sound via speaker is adjusted with VOL + / –  
on the remote control unit or VOL+ / – on the LCD  
Monitor.  
Audio Only  
When listening to music from a music program, you  
can turn the screen off and enjoy audio only.  
On: Audio is output without screen image.  
Sound via the AUDIO OUTPUT terminal is not  
adjustable and outputs at a consistent level.  
Variable: Sound via the AUDIO OUTPUT terminal is  
adjusted with VOL+ / – on the remote control unit  
or VOL+ / – on the LCD Monitor.  
Off: Both screen images and audio are output.  
Sound via speaker is muted.  
• The screen image will return to normal when a button  
(except those for audio adjustment, such as VOL,  
MUTE) is pressed.  
Color System  
Select the video signal system compatible with your  
equipment from the list below:  
Auto/NTSC/PAL  
Input Select  
If the image does not come in clearly from the  
external equipment connected to INPUT 3 or INPUT  
7 (DVI), you may need to change the input signal  
type setting on the “Input Select” menu.  
• “Color System” can only be set for the INPUT 2 and  
INPUT 3 VIDEO.  
Game Play Time  
Selecting input signal type (INPUT 3)  
■
Select the input signal type from the list below:  
This function displays the elapsed game time so  
you do not lose track of the time. To display the  
elapsed time, select “GAME” for the AV MODE  
before starting the game.  
Auto/COMPONENT/VIDEO  
• If the selected signal type is incorrect, images are not  
displayed at all or are displayed without any color.  
• Refer to your external equipment operation manual for  
the signal type.  
• If you set INPUT 3 to Auto, the LCD Monitor will  
automatically select the input signal.  
• Setting INPUT 3 signal selection to “Auto” when other  
equipment is connected will result in the following  
connection priority.  
On: The elapsed time is displayed every 30 minutes  
when you switch to GAME mode in external input  
mode.  
Off: No adjustment.  
Operation Lock Out  
This function locks the operation buttons on the  
LCD Monitor and the remote control.  
Off: No adjustment  
INPUT 3:  
COMPONENT VIDEO  
VIDEO  
RC Control Lock: All buttons on the remote control  
are locked.  
Button Control Lock: All buttons on the LCD  
Monitor, except POWER, are locked.  
Selecting DVI input signal type (INPUT 7)  
Select the input signal type from the list below:  
■
Auto/DIGITAL/ANALOG  
• To unlock the buttons on the remote control, press  
MENU on the LCD Monitor, and then select “Off” on  
the MENU screen.  
• To unlock the buttons on the LCD Monitor, press  
MENU on the remote control, and then select “Off” on  
the MENU screen.  
HDMI Setup  
To watch an HDMI equipment image, select “INPUT  
4”, “INPUT 5” or “INPUT 6” from “INPUT SOURCE”  
menu using INPUT on the remote control unit or on  
the LCD Monitor.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
Problem  
Possible Solution  
• No power  
• Check if you pressed POWER on the remote control unit. (See page 17.)  
If the indicator on the LCD Monitor does not light up, press POWER on the  
LCD Monitor.  
• Is the AC cord disconnected? (See page 9.)  
• Has the main POWER been turned ON? (See page 9.)  
• Has the power been turned on? (See page 9.)  
• Unit cannot be operated.  
• External influences such as lightning, static electricity, may cause improper  
operation. In this case, operate the unit after first turning off the power of  
the LCD Monitor or unplugging the AC cord and replugging it in after 1 or 2  
minutes.  
• Remote control unit does not  
operate.  
• Are batteries inserted with polarity (+, –) aligned? (See page 10.)  
• Are batteries worn out? (Replace with new batteries.)  
• Are you using it under strong or fluorescent lighting?  
• Is a fluorescent light illuminated near the remote control sensor?  
• Picture is cut off/with sidebar  
screen.  
• Is the image position correct? (See page 26.)  
• Are screen mode adjustments such as picture size made correctly? (See  
page 20.)  
• Strange color, light color, or color • Adjust the picture tone. (See pages 23 and 24.)  
misalignment  
• Is the room too bright? The picture may look dark in a room that is too  
bright.  
• Check the input signal setting. (See page 26.)  
• Power is suddenly turned off.  
• Is the sleep timer set? (See page 18.)  
• Check the power control settings. (See page 25.)  
• The unit’s internal temperature has increased. Remove any objects blocking  
vent or clean.  
• No picture  
• Is connection to other components correct? (See pages 14 to 16.)  
• Is correct input signal source selected after connection? (See page 27.)  
• Is the correct input selected? (See page 27.)  
• Is picture adjustment correct? (See pages 23 and 24.)  
• Is “On” selected in “Audio Only”? (See page 27.)  
• Is a non-compatible signal being input? (See page 16.)  
• No sound  
• Are the speakers connected correctly? (See page 8.)  
• Is the volume too low? (See page 18.)  
• Is “Variable” selected in “Output Select”? (See page 27.)  
• Have you pressed MUTE on the remote control unit? (See page 18.)  
• The LCD Monitor sometimes  
makes a cracking sound.  
• This is not a malfunction. This happens when the cabinet slightly expands  
and contracts according to change in temperature. This does not affect the  
LCD Monitor’s performance.  
Cautions regarding use in high and low temperature environments  
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear  
slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.  
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or  
near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.  
Storage temperature: -20°C to +60°C  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
RS-232C Port Specifications  
PC control of the LCD Monitor  
Command format  
■
■
• Connect the COM port of the PC (RS-232C connector)  
and the RS-232C terminal of the LCD Monitor with an  
RS-232 cable (cross-type, commercially-available  
product).  
Eight ASCII codes + CR  
C1 C2 C3 C4 P1 P2 P3 P4  
Command 4-digits Parameter 4-digits Return code  
• This operation system should be used by a person who  
is accustomed to using computers.  
Command 4-digits: Command. The text of four  
characters.  
Communication conditions  
■
Parameter 4-digits: Parameter 0–9, x, blank, ?  
Set the RS-232C communication settings on the  
PC to match the LCD Monitor’s communication  
conditions.  
The LCD Monitor’s communication settings are as  
follows:  
Parameter  
■
Input the parameter values, aligning left, and fill with  
blank(s) for the remainder. (Be sure that 4 values  
are input for the parameter.)  
When the input parameter is not within an  
adjustable range, “ERR” returns. (Refer to  
“Response code format”.)  
Baud rate:  
Data length:  
Parity bit:  
9,600 bps  
8 bits  
None  
When “?” is input for some  
0
0
−
Stop bit:  
1 bit  
commands, the  
present setting  
value responds.  
0
3
0
0
9
?
?
Flow control:  
None  
?
?
?
Communication procedure  
■
Response code format  
■
Send the control commands from the PC via the  
RS-232C connector.  
The LCD Monitor operates according to the received  
command and sends a response message to the  
PC.  
Do not send multiple commands at the same time.  
Wait until the PC receives the OK response before  
sending the next command.  
Normal response  
Problem response (communication  
error or incorrect command)  
O
K
E
R
R
Return code (0DH)  
Return code  
(0DH)  
Command table  
■
• Commands not indicated here are not guaranteed to operate.  
CONTROL CONTENTS  
The Power On command rejected.  
CONTROL ITEM  
POWER ON COMMAND  
SETTING  
COMMAND PARAMETER  
_
_
_
_
_
_
R S P W 0  
Off  
On  
This command will function only when the LCD Monitor powers on.  
The Power On command accepted.  
1
This command will function only when the LCD Monitor powers on.  
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
P O W R  
0
1
x
*
Power Off  
It shifts to standby.  
Power On  
POWER SETTING  
Power On  
INPUT  
TOGGLE  
INPUT1-7  
I
I
I
I
T G D  
A V D  
0-9  
It input-switches by the toggle. (It is the same as an input change key.)  
It input-switches to INPUT1-INPUT7.  
An input change is also included.  
Input terminal number (1–7)  
0: Auto, 1: VIDEO, 2: COMPONENT  
0: Auto, 5: DIGITAL, 6: ANALOG  
INPUT SELECT INPUT 3  
INPUT 7  
AV MODE SELECTION  
N P  
3
*
N P  
7
*
*
A V M D  
0: (Toggle), 1: STANDARD, 2: MOVIE, 3: GAME, Although it can choose now, it is toggle operation in inside.  
4: USER, 5: DYNAMIC(Fixed), 6: DYNAMIC, 7: PC  
Volume (0–60)  
_
_
_
_
_
_
_
VOLUME  
POSITION  
V O L M  
*
*
*
*
*
*
*
*
*
*
H-POSITION H P O S  
V-POSITION V P O S  
CLOCK  
PHASE  
*
*
*
The screen position variable ranges depend on the View Mode or the  
signal type.  
C
L C K  
P H S E  
D E  
Only PC mode. (0–180)  
Only PC mode. (0–40)  
*
*
_
_
VIEW MODE  
W
I
0: (Toggle) [AV], 1: Side Bar [AV],  
2: S.Stretch [AV], 3: Zoom [AV],  
4: Stretch [AV], 5: Normal [PC],  
6: Zoom [PC], 7: Stretch [PC],  
0: Although it can choose now, it is toggle operation in inside.  
1: Only available when 4:3 signal is being input.  
5, 6: Only available when 4:3 signal is being input.  
8: [PC] Available except when UXGA is being input.  
[AV] Only available when 1080i/p is being input.  
9: Only available when 720p is being input.  
8: Dot by Dot [PC] [AV], 9: Full Screen [AV]  
_
_
_
_
_
_
_
_
_
MUTE  
SURROUND  
SLEEP TIMER  
M U T E  
A C S U  
O F T M  
*
*
*
0: (Toggle), 1: On, 2: Off  
0: (Toggle), 1: On, 2: Off  
0: Off, 1: OFF TIMER – 30 MIN.,  
2: OFF TIMER – 60 MIN., 3: OFF TIMER – 90 MIN.,  
4: OFF TIMER – 120 MIN.  
• If an underbar (_) appears in the parameter column, enter a space.  
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.  
• Any numerical value can replace the (x) on the table.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Specifications  
Model  
LB-1085  
108˝ screen size class Advanced Super View & BLACK TFT LCD  
(Diagonal Measurement: 2,732.7 mm)  
LCD panel  
Resolution  
Audio out  
2,073,600 pixels (1,920 x 1,080)  
15W x 2 (4 Ω)  
INPUT 1  
COMPONENT in, Audio in  
AV in, S-VIDEO in  
INPUT 2  
INPUT 4  
INPUT 5  
INPUT 6  
INPUT 7  
HDMI in with HDCP  
HDMI in with HDCP  
Audio in, HDMI in with HDCP  
DVI-I in with HDCP, Audio in (Ø 3.5 mm jack)  
Rear  
Side  
Terminals  
DIGITAL AUDIO OUTPUT Optical Digital audio output x 1 (PCM)  
OUTPUT  
RS-232C  
SPEAKER  
INPUT 3  
Audio out  
9-pin D-sub male connector  
Speaker Terminal  
AV in, COMPONENT in  
English/German/French/Spanish  
AC 200-240 V, (Single-phase, 3-wire type) 50/60 Hz  
1,130 W (0.8 W Standby with AC 200 V)  
250.0 kg  
OSD language  
Power Requirement  
Power Consumption  
LCD Monitor + stand*1  
LCD Monitor only  
Weight  
195.0 kg  
LCD Monitor + stand*1  
2572 x 1815 x 600 mm  
2572 x 1591 x 204 mm  
0°C to +40°C  
Dimension*2  
(W x H x D)  
LCD Monitor only  
Operating temperature  
*1 With factory-shipped stand.  
*2 The dimensional drawings are shown on the inside back cover.  
The heights include the protruding part of the eye bolt. The depth excludes protrusions.  
• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes  
for product improvement without prior notice. The performance specification figures indicated are nominal values of  
production units. There may be some deviations from these values in individual units.  
• The TFT color LCD panel used in this monitor is made with the application of high precision technology. However,  
there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is  
viewed from an acute angle there may be uneven colors or brightness.  
Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of  
the monitor.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Information on the Software License for This Product  
Software composition  
■
The software included in this product is comprised of various software components whose individual  
copyrights are held by SHARP or by third parties.  
Software developed by SHARP and open source software  
■
The copyrights for the software components and various relevant documents included with this product  
that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act,  
international treaties, and other relevant laws.  
This product also makes use of freely distributed software and software components whose copyrights  
are held by third parties. These include software components covered by a GNU General Public License  
(hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement.  
Obtaining source code  
■
Some of the open source software licensors require the distributor to provide the source code with the  
executable software components. GPL and LGPL include similar requirements. For information on  
obtaining the source code for the open source software and for obtaining the GPL, LGPL, and other license  
agreement information, visit the following website:  
http://www.sharp.co.jp/lcd-display/corporate/support/download/source_e.html  
We are unable to answer any questions about the source code for the open source software. The source  
code for the software components whose copyrights are held by SHARP is not distributed.  
Acknowledgements  
■
The following open source software components are included in this product:  
• linux kernel/busybox/uClibc /zlib/libpng/libjpeg  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensional Drawings / Maßzeichnungen / Dimensions du moniteur /  
Dibujos de dimensiones / Чертежи с указанием размеров  
Unit: mm  
Einheit: mm  
Unité : mm  
Unidad: mm  
Блок: мм  
2572  
204  
2390.2/2390,2  
1470  
228  
267  
204  
245  
2572  
2390.2/2390,2  
600  
1530  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SHARP CORPORATION  
Printed in Japan  
Gedruckt in Japan  
Imprimé au Japon  
Impreso en Japón  
Отпечатано в Японии  
CS2  
08G  
DSC1  
TINS-D842WJZZ  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Snapper Tiller 6HP User Manual
Sony CD Player CDX 4240R User Manual
Sony Cell Phone CMD J5 J16 User Manual
Sony Computer Drive PEGA UC50 User Manual
Sony Portable CD Player CDX M60UI User Manual
Sony Webcam PCS TL33 User Manual
State Industries Water Heater 5 THRU 120 User Manual
State Industries Water Heater GPX User Manual
Sylvania CRT Television 6432TD User Manual
Tannoy Portable Speaker Di5a User Manual