Sharp CD Player BD HP20U User Manual

BD-HP20U  
BLU-RAY DISC PLAYER  
OPERATION MANUAL  
MODE D'EMPLOI  
MANUAL DE OPERACIÓN  
LECTEUR DE DISQUE BLU-RAY  
REPRODUCTOR DE DISCOS BLU-RAY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEAR SHARP CUSTOMER  
Thank you for your purchase of the Sharp Blu-ray Disc Player. To ensure safety and  
many years of trouble-free operation of your product, please read the Important  
Safety Instructions carefully before using this product.  
IMPORTANT SAFETY INSTRUCTIONS  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if  
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,  
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following  
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of  
your Blu-ray Disc Player, please read the following precautions carefully before using the product.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or  
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in  
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been  
dropped.  
Additional Safety Information  
15) Power Sources—This product should be operated only from the type of power source indicated on the marking  
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power  
company. For products intended to operate from battery power, or other sources, refer to the operating  
instructions.  
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch  
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any  
kind on the product.  
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service  
personnel under the following conditions:  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following the operating instructions.  
Adjust only those controls that are covered by the operating instructions as an improper adjustment of other  
controls may result in damage and will often require extensive work by a qualified technician to restore the  
product to its normal operation,  
e) If the product has been dropped or damaged in any way, and  
f) When the product exhibits a distinct change in performance - this indicates a need for service.  
19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement  
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or other hazards.  
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform  
safety checks to determine that the product is in proper operating condition.  
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product  
according to the method recommended by the manufacturer.  
22) The mains plug is used as disconnect device and shall always remain readily operable.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl,  
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.  
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an  
unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the  
product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the  
product. When mounting the product on a wall, be sure to follow the manufacturer's instructions. Use only  
the mounting hardware recommended by the manufacturer.  
• Selecting the location — Select a place with no direct sunlight and good ventilation.  
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or  
block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life  
of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block  
ventilation openings. This product is not designed for built-in installation; do not place the product in an  
enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer's  
instructions are followed.  
• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves,  
or other products (including amplifiers) that produce heat.  
• Lightning — For added protection for this television equipment during a lightning storm, or when it is  
left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the  
antenna. This will prevent damage to the equipment due to lightning and power-line surges.  
To prevent fire, never place any type of candle or flames on the top or near the product.  
To prevent fire or shock hazard, do not expose this product to dripping or splashing.  
No objects filled with liquids, such as vases, should be placed on the product.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
To prevent fire or shock hazard, do not place the AC cord under the product or other heavy  
items.  
Turn off the main power and unplug the AC cord from the wall outlet before handling.  
To clean the outer cabinet, periodically wipe it with a soft cloth.  
• Do not use chemicals for cleaning. It may damage the cabinet finish.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Repeat Playback of a Title or Chapter (Repeat  
n Introduction  
Playback).............................................................. 28  
Enlarge the playback image (Zoom function)........... 28  
Partial Repeat Playback (Repeat Playback of a  
DEAR SHARP CUSTOMER .......................1  
IMPORTANT SAFETY INSTRUCTIONS....1  
Contents.....................................................4  
What would you like to do with this  
Player?......................................................5  
About Discs.......................................... 6 – 7  
About Disc Contents.................................8  
Important Information...............................9  
Getting Started ........................................10  
Major Components.......................... 11 – 12  
Specified Part)...................................................... 29  
Switching Audio...................................................... 29  
Switching Subtitles................................................. 29  
Switching the Angle................................................ 30  
Displaying the Angle Mark ...................................... 30  
Settings During Playback ............... 31 – 32  
Function Control............................................. 31 – 32  
q Settings  
SETTINGS......................................... 33 – 46  
AUDIO VIDEO SETTINGS............................... 33 – 35  
Basic Operation for AUDIO VIDEO SETTINGS........ 36  
SPEAKER SETTINGS............................................. 37  
Basic Operation for SPEAKER SETTINGS ...... 37 – 39  
QUICK START........................................................ 40  
AUTO POWER OFF................................................ 40  
AQUOS LINK.......................................................... 40  
PLAYBACK..................................................... 41 – 42  
Basic Operation for PLAYBACK SETTING .............. 43  
FRONT DISPLAY/LED ............................................ 44  
VERSION ............................................................... 44  
SYSTEM RESET..................................................... 44  
SOFTWARE UPDATE ..................................... 45 – 46  
o Connection  
Introduction to Connections ..................13  
Video Connections .......................... 14 – 16  
Connecting to the HDMI Terminal ........................... 14  
Change the video output to HDMI video out........... 14  
Connecting to the Component Jacks ..................... 15  
Connecting to the S-video or Video Jack................ 16  
Audio Connections.......................... 17 – 19  
Connecting 5.1 ch Speakers through an Amplifier .. 17  
Connecting to the Digital Audio Terminal or Jack .... 18  
Connecting the Audio Jacks................................... 19  
r Appendix  
p Disc Playback  
Troubleshooting............................... 47 – 48  
On-screen Error Messages ...................49  
Glossary ........................................... 50 – 51  
Specifications ..........................................52  
LIMITED WARRANTY...................... 53 – 54  
Before Starting Playback................ 20 – 23  
Loading the Batteries in the Remote Control........... 20  
Connecting the Power Cord ................................... 20  
Setting the Remote Control Code........................... 21  
Operating a SHARP TV Using the Remote Control... 21  
Turning the Power On............................................. 22  
Language Setting ................................................... 22  
Turning Off the LCD Backlight and Indications ........ 23  
Using AQUOS LINK................................................ 23  
BD/DVD/CD Playback..................... 24 – 27  
Loading a Disc ....................................................... 24  
BD/DVD Video Playback......................................... 24  
BD/DVD Menus...................................................... 25  
BD-R/-RE/DVD-R/-RW Playback.................... 26 – 27  
Audio CD Playback................................................. 27  
* The illustrations and on-screen displays in this operation manual  
are for explanation purposes and may vary slightly from the actual  
operations.  
Playback Functions......................... 28 – 30  
Fast Forward/Reverse (Search)............................... 28  
Skipping to the Next or the Start of the Current  
Chapter (Track)..................................................... 28  
Slow Playback........................................................ 28  
Pause/Frame Advance Playback ............................ 28  
Skip Search............................................................ 28  
Replay.................................................................... 28  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
What would you like to do with this Player?  
Watching high quality movies on Blu-  
ray discs  
This Player offers full high-definition Blu-ray disc  
What to do first:  
playback.  
Refer to “Getting Started” (p. 10) to  
BD/DVD Video Playback (p. 24)  
prepare for watching your discs.  
Enjoying different kinds of discs and  
contents  
Use this Player to enjoy various types of optical  
discs such as DVDs and CDs that contain various  
multimedia content.  
nIntroduction (pp. 1-12)  
Explains the important operation information.  
About Discs (pp. 6-7)  
BD/DVD Video Playback (p. 24)  
Simple connection and operation  
oConnection (pp. 13-19)  
through HDMI  
Shows the connecting options provided by this  
Player.  
This Player is equipped with an HDMI terminal.  
You can connect it to the TV using HDMI and  
no other cable will be needed to enjoy movies. If  
your TV is compatible with AQUOS LINK, you can  
control both the TV and this Player with simple  
operations.  
Introduction to Connections (p. 13)  
Video Connections (p. 14)  
p
Disc Playback (pp. 20-32)  
Shows simple playback and useful functions.  
Experiencing surround sound with  
your speakers  
This Player can output 5.1 ch surround sound to  
the speakers through an amplifier. Enjoy the rich  
feel of a movie theater.  
qSettings (pp. 33-46)  
Gives you more options to suit your  
circumstances.  
Introduction to Connections (p. 13)  
Audio Connections (p. 17)  
rAppendix (pp. 47-54)  
Provides troubleshooting tips and more  
information.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
About Discs  
A Quick Reference for Selecting Discs  
The following is a quick reference to see what discs can/  
cannot be used with this Player. Each disc has a compatible  
Recording Format(s) which may present some constraints.  
For detailed and exact information, read the explanation in  
pages 6 and 7.  
Types of Discs that Can Be Used  
with This Player  
• The following discs can be played back in this Player. Do not use  
an 8 cm (3”) to 12 cm (5”) adapter.  
• Use discs that conform to compatible standards as indicated  
by the presence of official logos on the disc label. Playback of  
discs not complying with these standards are not guaranteed. In  
addition, the image quality or sound quality is not guaranteed even  
if the discs can be played back.  
Can Play Back  
BD Video (with Region code “A” and “ALL” only)  
BD-RE Ver.2.1 1L (finalized disc only)  
BD-R Ver.1.1 1L (*finalized disc only)  
DVD Video (with Region code “1” and “ALL” only)  
DVD-RW/DVD-R (*finalized disc only)  
DVD+RW/DVD+R (*finalized disc only)  
DVD-R DL (*finalized disc only)  
Audio CD  
Recording  
Format  
Disc Type  
Contents  
Disc Size  
Region code  
A/ALL  
Audio + Video  
(Movie)  
12 cm (5”)  
BD vIdeo  
CD-RW/CD-R  
BD-RE/BD-R (finalized disc only)  
Cannot Play Back  
Region code  
Video/VR  
mode  
Audio + Video  
(Movie)  
12 cm (5”)  
8 cm (3”)  
DVD Video  
ALL  
1
CDG, Video CD, Photo CD, CD-ROM, CD-TEXT, SVCD,  
SACD, PD, CDV, CVD, DVD-RAM, DVD-Audio  
BD-RE Ver. 1.0, BD-RE DL, CD-MP3, CD-WMA  
DVD+RW/DVD+R  
DVD-RW/DVD-R  
DVD-R DL  
Video/VR  
mode (findlized (Movie)  
disc only)  
Audio + Video  
12 cm (5”)  
8 cm (5”)  
Audio CD *1  
Audio CD  
(CD-DA)  
Audio  
12 cm (5”)  
8 cm (3”)  
NOTE  
CD-RW/CD-R (finalized disc only) Audio CD  
(CD-DA)  
Audio  
* “Finalize” in this manual refers to making sure to have a recording  
device process on the recorded disc so that it will play in other  
DVD players as well as this player. Only finalized discs will playback  
in this player.  
*1  
This Player has been designed on the premise of playing back  
Audio CDs that comply with CD (Compact Disc) standards. CDs  
containing a signal for the purpose of protecting copyrights (copy  
control signal) may not be able to be played back with this Player.  
Blu-ray Disc  
• BD/DVD video players and discs have region codes, which dictate  
the regions in which a disc can be played. This Player's region  
code is A for BD and 1 for DVD. (Discs marked ALL will play in  
any player.)  
• BD/DVD Video operations and functions may be different from  
the explanations in this manual and some operations may be  
prohibited due to disc manufacturer's settings.  
• If a menu screen or operating instructions are displayed during  
playback of a disc, follow the operating procedure displayed.  
• The audio component of a DVD video recorded at 96 kHz (Linear  
PCM) will be output as 48 kHz audio during playback.  
Blu-ray Disc is the ultimate next generation optical media  
format, offering the following key features:  
Largest capacity (25 GB single layer – 50 GB dual layer)  
– with over 5 times the amount of content possible with  
current DVDs, particularly well suited for high definition  
feature films with extended levels of interactive features  
Pristine picture quality with the capability for full high  
definition 1920 x 1080p resolution  
Best audio possible with uncompressed surround sound  
(higher quality than even theatre audio)  
Broadest industry support – ensuring more choice for  
consumers in the marketplace  
NOTE  
Hardware products will be backward compatible with  
DVDs, allowing continued enjoyment of existing DVD  
libraries  
• Playback for some of the discs in the tables above may not be  
possible depending on the disc.  
* “Finalize” in this manual refers to making sure to have a recording  
device process the recorded disc so that it will play in other DVD  
players and on this player. Accordingly, only finalized discs will  
playback in this player.  
Disc Durability – new breakthroughs in hard coating  
technologies gives Blu-ray Discs the strongest resistance  
to scratches and finger prints.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
About Discs  
Discs that Cannot Be Used with  
This Player  
The following discs cannot be played back or will  
not play back properly on this Player. If such a disc is  
mistakenly played back, speaker damage may occur.  
Never attempt to play back these discs.  
CDG, Video CD, Photo CD, CD-ROM, CD-TEXT, SVCD,  
SACD, PD, CDV, CVD, DVD-RAM, DVD-Audio  
BD-RE Ver. 1.0, BD-RE DL, CD-MP3, CD-WMA  
Discs with unusual shapes cannot be played.  
• Discs with unusual shapes (heart-shaped or hexagonal  
discs, etc.) cannot be used. The use of such discs will cause  
malfunction.  
The following BD video discs cannot be played.  
• Discs not displaying “A” or “ALL” for the region code (discs sold  
outside the authorized marketing area).*2  
• Discs produced illegally.  
• Discs recorded for commercial use.  
*2 The region code for this product is A.  
The following DVD video discs cannot be played.  
• Discs not displaying “1” or “ALL” for the region code (discs sold  
outside the authorized marketing area).*3  
• Discs produced illegally.  
• Discs recorded for commercial use.  
*3 The region code for this product is 1.  
The following BD-RE/R, DVD-RW/R, DVD+RW/R  
discs cannot be played.  
• Discs on which data has not been recorded cannot be played  
back.  
The following Audio CD discs cannot be played.  
• Discs containing a signal for the purpose of protecting  
copyrights (copy control signal) may not be played back with  
this Player.  
• This Player has been designed on the premise of playing back  
Audio CDs that comply with CD (Compact Disc) standards.  
The following CD-RW/R discs cannot be played.  
• Discs on which data has not been recorded cannot be played  
back.  
• Non-finalized discs cannot be played back.  
• Discs recorded in a format other than an Audio CD cannot be  
played back.  
• Discs may not be played back depending on their recording  
status or the status of the disc itself.  
• Discs may not be played back depending on their compatibility  
with this Player.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
About Disc Contents  
MPEG  
Title, Chapter and Track  
• Blu-ray discs and DVDs are divided into “Titles” and “Chapters”.  
If the disc has more than one movie on it, each movie would be a  
separate “Title”. “Chapters”, on the other hand, are subdivisions of  
titles. (See Example 1.)  
MPEG Audio gives movie theater ambience to audio  
output when the Player is connected to an MPEG Audio  
5.1 channel processor or amplifier.  
NOTE  
• Audio CDs are divided into “Tracks”. You can think of a “Track” as  
one tune on an Audio CD. (See Example 2.)  
• This Player supports 2-channel (L/R) audio and 5.1 ch (Multi-  
channel) MPEG Audio 1/2 (only when the DIGITAL AUDIO OUT  
OPTICAL/COAXIAL jack is used for connection). It does not  
support 7.1 channel MPEG Audio Ver.2.0.  
Example 1: Blu-ray disc or DVD  
2
Subtitle languages  
This indicates the kind of subtitles.  
Title 1  
Title 2  
3
Screen aspect ratio  
Movies are shot in a variety of screen modes.  
Chapter 1  
Chapter 2  
Chapter 3  
Chapter 1  
Chapter 2  
4
Camera angle  
Example 2: Audio CD  
Recorded onto some BD/DVD discs are scenes which  
have been simultaneously shot from a number of different  
angles (the same scene is shot from the front, from the left  
side, from the right side, etc.).  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
5
Region code  
This indicates the region code (playable region code).  
Icons Used on DVD Video Disc Cases  
The Icons Used in This Operation  
Manual  
The back of the case of a DVD that is commercially available  
usually contains various information about the contents of the  
disc.  
........ Indicates the functions that can be performed  
for BD Video discs.  
BD VIDEO  
1
2
........ Indicates the functions that can be performed  
for BD-RE discs.  
BD-RE  
1. English  
2. Chinese  
1. English  
2. Chinese  
2
........ Indicates the functions that can be performed  
for BD-R discs.  
2
BD-R  
.... Indicates the functions that can be performed  
for DVD Video discs.  
DVD VIDEO  
3
4
5
...... Indicates the functions that can be performed  
for DVD-RW discs.  
....... Indicates the functions that can be performed  
for DVD-R discs.  
DVD-RW  
1 23  
4 56  
16:9 LB  
2
DVD-R  
........ Indicates the functions that can be performed  
for Audio CDs.  
AUDIO CD  
1
Audio tracks and audio formats  
DVD discs can contain up to 8 separate tracks with  
a different language on each. The first in the list is the  
original track.  
This section also details the audio format of each  
soundtrack—Dolby Digital, DTS, MPEG etc.  
Dolby Digital  
A sound system developed by Dolby Laboratories Inc.  
that gives movie theater ambience to audio output when  
the Player is connected to a Dolby Digital processor or  
amplifier.  
DTS  
DTS is a digital sound system developed by DTS, Inc.  
for use in cinemas. This system uses 6 audio channels  
and provides accurate sound field positioning and  
realistic acoustics. (By connecting a DTS Digital Surround  
decoder, you can also listen to DTS Digital Surround  
sound.)  
Linear PCM  
Linear PCM is a signal recording format used for Audio  
CDs and on some DVD and Blu-ray discs. The sound on  
Audio CDs is recorded at 44.1 kHz with 16 bits. (Sound  
is recorded between 48 kHz with 16 bits and 96 kHz with  
24 bits on DVD video discs and between 48 kHz with 16  
bits and 192 kHz with 24 bits on BD video discs.)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information  
Disc Precautions  
Copyright  
• Audio-visual material may consist of copyrighted works which  
must not be recorded without the authority of the owner of the  
copyright. Refer to relevant laws in your country.  
• This product incorporates copyright protection technology that is  
protected by U.S. patents and other intellectual property rights.  
Use of this copyright protection technology must be authorized by  
Macrovision, and is intended for home and other limited viewing  
uses only unless otherwise authorized by Macrovision. Reverse  
engineering or disassembly is prohibited.  
Be Careful of Scratches and Dust  
• BD, DVD and CD discs are sensitive to dust, fingerprints and  
especially scratches. A scratched disc may not be able to be  
played back. Handle discs with care and store them in a safe  
place.  
Proper Disc Storage  
Place the disc in the center of the  
disc case and store the case and  
disc upright.  
U.S. Patent Nos. 4,631,603 and 4,907,093  
• Manufactured under license from Dolby Laboratories. “Dolby” and  
the double-D symbol are trademarks of Dolby Laboratories.  
• “DTS” and “DTS Digital Out” are trademarks of DTS, Inc.  
Avoid storing discs in locations  
subject to direct sunlight, close to  
heating appliances or in locations  
of high humidity.  
is a trademark.  
is a trademark of DVD Format/Logo Licensing Corporation.  
Do not drop discs or subject  
them to strong vibrations or  
impacts.  
• HDMI, the HDMI logo and High-Definition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing LLC.  
• Java and all Java-based trademarks and logos are trademarks  
or registered trademarks of Sun Microsystems, Inc. in the United  
States and/or other countries.  
Avoid storing discs in locations  
where there are large amounts of  
dust or moisture.  
Handling Precautions  
• If the surface is soiled, wipe gently with a soft, damp (water only)  
cloth. When wiping discs, always move the cloth from the center  
hole toward the outer edge.  
• Do not use record cleaning sprays, benzene, thinner, static  
electricity prevention liquids or any other solvent.  
• Do not touch the surface.  
• Do not stick paper or adhesive labels to the disc.  
• If the playing surface of a disc is soiled or scratched, the Player  
may decide that the disc is incompatible and eject the disc tray,  
or it may fail to play the disc correctly. Wipe any dirt off the playing  
surface with a soft cloth.  
Cleaning the Pick Up Lens  
• Never use commercially available cleaning discs. The use of these  
discs can damage the lens.  
• Request the nearest service center approved by Sharp to clean  
the lens.  
Warnings about dew formation  
• Condensation may form on pick up lens or disc in the following  
conditions:  
—Immediately after a heater has been turned on.  
—In a steamy or very humid room.  
—When the Player is suddenly moved from a cold environment to  
a warm one.  
When condensation forms:  
It becomes difficult for the Player to read the signals on the disc  
and prevents the Player from operating properly.  
To remove condensation:  
Take out the disc and leave the Player with the power off until  
the condensation disappears. Using the Player when there is  
condensation may cause malfunction.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Step 1: Unpacking  
Make sure the following accessories are provided with the product.  
Remote control unit  
AC cord  
“AAA” size battery (g2)  
AV cable  
Step 2: Selecting equipment to connect  
Connection varies with the equipment used. Refer to Connection (Pages 14-19).  
Turn off the devices before connecting.  
Step 3: Playing back discs  
Play back a Blu-ray disc after connecting the Player to your favorite equipment.  
Refer to Disc Playback. (Pages 20-32)  
Step 4: Adjust settings  
Adjust settings to enjoy various features and other functions for playing discs.  
Refer to Settings (Pages 33-46).  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Major Components  
Main Unit (Front)  
1 2  
3
4
5
7
8
6
9
1 POWER (p. 22)  
7 ON indicator (p. 22)  
8 STANDBY indicator (p. 22)  
9 Front panel display (p. 22)  
2 Remote control sensor (p. 20)  
3 Disc tray (p. 24)  
4 OPEN/CLOSE (p. 24)  
5 DVD/CD mode indicator (p. 22)  
6 BD mode indicator (p. 22)  
Main Unit (Rear)  
9
10  
1
2
3
4
5
6
11  
7
8
1 COMPONENT VIDEO OUT jacks (p. 15)  
2 S-VIDEO output jack (p. 16)  
8 DIGITAL AUDIO OUT OPTICAL terminal (p. 18)  
9 Cooling fan  
3 VIDEO output jack (p. 16)  
The cooling fan operates while the power to the Player  
is on.  
10 AC IN terminal (p. 20)  
11 SERVICE terminal for software (p. 45)  
4 2CH AUDIO output jacks (p. 19)  
5 5.1CH AUDIO OUT jacks (p. 17)  
6 HDMI OUT terminal (p. 14)  
7 DIGITAL AUDIO OUT COAXIAL jack (p. 18)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Major Components  
Remote Control Unit  
1 POWER (p. 22)  
OPEN/CLOSE (p. 24)  
2
3 TOP MENU, TITLE LIST (pp. 25, 26)  
4 DISPLAY (p. 21)  
1
2
16  
5 Cursor buttons (a/b/c/d), ENTER (pp. 22, 36)  
6 EXIT (pp. 22, 36)  
7 A (Red), B (Green), C (Blue), D (Yellow) (p. 27)  
8 AUDIO (p. 29), SUBTITLE (p. 29), ANGLE (p. 30)  
17  
18  
9
(Lock) (See below.)  
3
4
10 REPEAT (pp. 28, 29), OFF (for REPEAT) (pp. 28, 29)  
11 S REV (p. 28)  
19  
12 T SKIP (p. 26)  
5
13 REPLAY (p. 28)  
14 SLOW (p. 28)  
6
7
8
9
10  
11  
20  
15 LIGHT (p. 23)  
16 TV CONTROL buttons (p. 21)  
17 SETUP (pp. 22, 36)  
18 POP-UP MENU (p. 25)  
19 FUNCTION (p. 31)  
21  
22  
23  
24  
25  
26  
20 n RETURN (p. 28)  
21 ZOOM k/l (p. 28)  
22 I PLAY (p. 24)  
23 J FWD (p. 28)  
24 PAUSE (p. 28)  
12  
13  
25 LSKIP (p. 26)  
26 SKIP SEARCH (p. 28)  
27 STOP (p. 24)  
27  
28  
29  
14  
15  
28 HDMI (p. 14)  
29 COMPONENT RESET (p. 33)  
30 Number buttons (p. 32)  
31 ENTER (p. 32)  
This button is the same operation as 5 ENTER.  
32 CLEAR (p. 32)  
Buttons under the cover  
To clear the input number  
33 Non-functional buttons  
31  
32  
These buttons on the remote control are non-functional.  
They have no operation at all.  
30  
Keylock function  
You can set the keylock to prevent accidental  
operations.  
33  
This function allows TVs compatible with AQUOS  
LINK to also perform a Key Lock on the player.  
Press and hold  
(Lock) for more than 5 seconds.  
Each time you perform this operation, the function is  
activated or deactivated.  
If you try to operate the Player while the keylock  
function is set, “Hold” blinks on the front display panel  
to indicate that the keylock function is set.  
NOTE  
• This remote control unit is equipped with two ENTER buttons (5  
and 31 listed above). The ENTER button under the cover is useful  
when using with the Number buttons.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction to Connections  
This Player is equipped with the terminals/jacks listed below. Find the corresponding terminal/jack on your video  
equipment. Using the supplied cable or commercially available cables, connect the video first. Then connect the  
audio.  
Video terminals/jacks on this Player  
Higher Quality  
HDMI OUT terminal  
1
2
Page 14  
Page 15  
COMPONENT VIDEO  
OUT jacks  
S-VIDEO output jack  
VIDEO output jack  
3
4
Page 16  
Standard Quality  
Audio terminals/jacks on this Player  
Digital audio connection  
Higher Quality  
HDMI OUT terminal  
1
Page 14  
Page 18  
DIGITAL AUDIO OUT  
terminal or jack  
2
Standard Quality  
Analogue audio connection  
Higher Quality  
5.1CH AUDIO OUT  
jacks  
1
Page 17  
Page 19  
2CH AUDIO output  
jacks  
2
Standard Quality  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Connections  
Connecting to the HDMI Terminal  
You will enjoy high quality digital picture and sound through the HDMI terminal.  
When you use AQUOS LINK, make sure to use a certified HDMI cable.  
STEPS  
1: Be sure to turn off this Player and the equipment before making any connections.  
2: Firmly connect an HDMI cable (commercially available) to the HDMI terminals (1 and 2).  
Caution:  
This Player  
• HDMI output and Component Video output  
can not be used at the same time.  
• When using an HDMI output, 7.1 ch  
Digital Output is available.  
Change the video output to HDMI  
video out  
When you connect both an HDMI cable and a component  
cable to this player, switch to the output terminals by remote  
control.  
1 To HDMI OUT terminal  
(The video output is not output both terminals.)  
1
2
Turn on the power.  
Press HDMI button for 5 seconds, and the  
change of “Component Video Out” and “HDMI  
Out” is possible.  
• (To switch outputs, it is necessary to keep the button  
pressed for several seconds.)  
HDMI cable  
(commercially available)  
Also, when the HDMI button is pressed, the current  
setting conditions will display while flashing (blinking),  
and then the selected output lamp displays.  
To HDMI input terminal  
2
3
” or “  
” is displayed  
alternately on the front panel display.  
NOTE  
• When you connect this player to a SHARP TV with an HDMI cable  
only and if the TV is on, the video output is changed to HDMI  
output automatically.  
The following setting is unnecessary.  
• When you connect to the TV with an HDMI cable only, HDMI video  
output is set to AUTO. If you don’t get the normal image, select  
the desired resolution.  
• When you are setting HDMI video output besides AUTO, you can  
only select the resolution that corresponds to the connected TV.  
AV receiver  
Projector  
Caution:  
TV  
Even when there is no cable connected to the Component video out,  
switching the output to CP-out (Component video out) is still possible.  
When CP-out is selected, there will be no signal from the HDMI  
video out.  
Equipment with an HDMI terminal  
After connecting  
• Load a disc and start playback. (Pages 24-27)  
• If desired, connect audio equipment. (Pages 17-19)  
• Refer to AQUOS LINK function. (See page 23 and 40)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Connections  
Connecting to the Component Jacks  
You will enjoy accurate color reproduction and high quality images through the component jacks.  
STEPS  
1: Be sure to turn off this Player and the equipment before making any connections.  
2: Firmly connect a component video cable (commercially available) to the component jacks (1 and 2).  
Caution:  
This Player  
• HDMI output and Component Video  
output can not be used at the same  
time.  
Caution:  
• Press HDMI button for 5 seconds, and the  
change of “Component Video Out” and “HDMI  
(Red)  
Out” is possible.  
• Even when there is no cable connected to the  
HDMI video out, switching the output to HO-out  
(HDMI video out) is still possible.  
When HO-out is selected, there will be no signal  
from the Component video out.  
(Blue)  
(Green)  
To COMPONENT  
VIDEO OUT jacks  
1
VCR  
Component video cable  
(commercially available)  
Connect directly  
Blu-ray Disc  
Player  
LCD TV  
To component  
2
video input jacks  
COMPO-  
NENT IN  
NOTE  
(Red)  
(Blue)  
• Connect the Blu-ray disc player to LCD TV  
directly. If you playback the image via VCR, the  
image may deteriorate due to the copy guard  
function.  
PR  
(CR)  
PB  
• When you record the program where copyright  
is protected, the copy guard function is activated  
automatically; the program can not be recorded  
correctly. Also, the playback image via VCR may  
deteriorate due to this function. However, this is  
not a malfunction. When you watch the program  
where copyright is protected, we recommend  
that the Blu-ray disc player be connected to LCD  
TV directly.  
(CB)  
(Green)  
Y
Projector  
AV receiver  
TV  
Video equipment with component jacks  
After connecting  
• Connect audio equipment or the audio terminals of the TV. (Pages 17-19)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Connections  
Connecting to the S-video or Video Jack  
You will enjoy the images through the S-video or video jack.  
STEPS  
1: Be sure to turn off this Player and the equipment before making any connections.  
2: Firmly connect an S-video cable (commercially available) or AV cable (supplied) to the S-video or video  
jacks (1 and 2, or 3 and 4).  
This Player  
(Yellow)  
VCR  
Connect directly  
Blu-ray Disc  
Player  
LCD TV  
To VIDEO jack  
3
NOTE  
To  
S-VIDEO  
jack  
• Connect the Blu-ray disc player to LCD TV  
directly. If you playback the image via VCR, the  
image may deteriorate due to the copy guard  
function.  
AV cable (supplied)  
1
2
S-video cable  
• When you record the program where copyright  
is protected, the copy guard function is activated  
automatically; the program can not be recorded  
correctly. Also, the playback image via VCR may  
deteriorate due to this function. However, this is  
not a malfunction. When you watch the program  
where copyright is protected, we recommend  
that the Blu-ray disc player be connected to LCD  
TV directly.  
(commercially available)  
or  
To video  
To  
4
input jack  
S-video  
input jack  
(Yellow)  
S-VIDEO  
Projector  
AV receiver  
TV  
Video equipment with an S-video or video jack  
After connecting  
• Connect audio equipment or the audio terminals of the TV. (Pages 17-19)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Connections  
Connecting 5.1 ch Speakers through an Amplifier  
You can connect up to 5 speakers and a subwoofer to the 5.1CH AUDIO OUT jacks using an amplifier.  
STEPS  
1: Be sure to turn off this Player and the equipment before making any connections.  
2: Firmly connect the audio cables to the 5.1CH AUDIO OUT jacks.  
This Player  
To SUBWOOFER jack  
To CENTER jack  
To FRONT L/R jack  
To SURROUND  
L/R jack  
Audio cables  
(commercially available)  
Amplifier  
NOTE  
You can also connect 2 ch stereo speakers through an amplifier.  
In this case, set the jacks without any speakers connected to  
“NONE”. (Pages 37-39)  
After connecting  
• Set the size, distance and level of each speaker. (Pages 37-39)  
• Load a disc and start playback. (Pages 24-27)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Connections  
Connecting to the Digital Audio Terminal or Jack  
You can connect audio equipment to the DIGITAL AUDIO OUT terminal or jack.  
STEPS  
1: Be sure to turn off this Player and the equipment before making any connections.  
2: Firmly connect an optical digital cable (commercially available) to the optical digital audio terminals or a  
coaxial digital cable (commercially available) to the coaxial digital audio jacks (1 and 2, or 3 and 4).  
This Player  
• When using COAXIAL/OPTICAL output,  
5.1 ch Digital Output is available.  
7.1 ch Digital Output is not available.  
To COAXIAL  
jack  
To OPTICAL  
terminal  
3
1
Optical digital cable  
(commercially available)  
Coaxial digital cable  
(commercially available)  
or  
To coaxial  
input jack  
To optical  
input terminal  
4
2
Amplifier  
Audio equipment with a digital audio input terminal or jack  
After connecting  
• Load a disc and start playback. (Pages 24-27)  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Connections  
Connecting the Audio Jacks  
You can connect audio equipment or the TV to the 2CH AUDIO output jacks.  
STEPS  
1: Be sure to turn off this Player and the equipment before making any connections.  
2: Firmly connect the AV cable (supplied) to the audio jacks (1 and 2).  
This Player  
(Red)  
(White)  
To 2CH AUDIO  
output jacks  
1
AV cable (supplied)  
To audio  
input jacks  
2
(Red)  
(White)  
Amplifier  
TV  
Audio equipment with audio jacks  
After connecting  
• Load a disc and start playback. (Pages 24-27)  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Starting Playback  
Approximate operating range of remote  
control  
Loading the Batteries in the Remote  
Control  
Remote control sensor  
1
Press down on the tab in the direction of the  
arrow to remove the battery cover.  
30º  
30º  
7 m  
Remote control unit  
2
Load the two R-03 size batteries (“AAA” size,  
UM/SUM-4) supplied with the remote control  
unit. Make sure that the battery poles m and n  
are positioned as indicated.  
Connecting the Power Cord  
Plug the supplied AC cord into the AC IN terminal on the rear  
of the Player. Then plug into AC outlet.  
3
Slide the battery cover in the direction of the  
arrow until it clicks.  
To AC IN terminal  
To AC outlet  
NOTE  
• Place the Player close to the AC outlet, and keep the power plug  
within reach.  
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH THE  
UN-INSULATED PARTS OF ANY CABLES WHILE THE AC CORD  
IS CONNECTED.  
• The STANDBY indicator blinks while the Player is preparing for  
starting up. You cannot turn the Player on until the STANDBY  
indicator stops blinking.  
NOTE  
• Do not subject the remote control unit to shock, water or  
excessive humidity.  
• The remote control unit may not function if the Player's remote  
sensor is in direct sunlight or any other strong light.  
• Incorrect use of batteries may cause them to leak or burst. Read  
the battery warnings and use the batteries properly.  
• Do not mix old and new batteries, or mix different brands.  
• Remove the batteries if you will not use the remote control unit for  
an extended period of time.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Starting Playback  
Setting the Remote Control  
Code  
Operating a SHARP TV  
Using the Remote Control  
• 3 types of remote control codes operate this Player:  
RC-1, RC-2 and RC-3. If you operate this Player  
by remote control along with another SHARP  
Blu-ray Disc Player or DVD Player placed next to it  
simultaneously, switching the remote control code  
(both the Player and remote control) to one of the  
signals (RC-1, RC-2 or RC-3) will let you operate  
only with this Player.  
The Universal Remote Control may operate the  
basic functions of the SHARP TV.  
TV function control  
• TV Power: POWER  
• TV Channel up/down: CH r / s  
• TV Volume up/down: VOL e/f  
• TV-AV Selector: INPUT  
• Make sure to set the Player and remote control to  
the same remote code. You can not operate the  
Player if they are not set to the same code.  
Setting the Remote Control  
Code of the Remote  
Example: Setting the code to “RC-3”.  
1
Press and hold 3 first and then  
POWER on the remote control  
together for more than 5 seconds.  
2
Press POWER to turn off the player.  
POWER  
Setting the Remote Control  
Code of the Player  
3
Point the remote control at the  
player, then press and hold the  
DISPLAY button.  
Remote control sensor  
The display on the player changes  
as shown below, and the player will  
be set to the same number as the  
remote control.  
Example: Change “RC-1” to “RC-3”.  
Approx. 2 sec. later  
Approx. 3 sec. later  
If remote control does not work  
First, press Power to turn on the player.  
Press POWER on the remote control and check  
the front panel display (RC-1, RC-2 or RC-3).  
Set the remote control code according to the  
display and press POWER to see if you can  
turn on/off the Player.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Starting Playback  
Turning the Power On  
Turning the power on  
Press POWER on the remote control or  
on the Player to turn on the power of the  
Player.  
Language Setting  
Changing the on-screen display  
language  
1
Press SETUP to display the SETUP  
MENU screen.  
2
Press a/b/c/d to select “ON  
SCREEN LANGUAGE”, then press  
ENTER.  
Entering standby  
Press POWER on the remote control or  
on the Player to enter standby.  
• If you press POWER again immediately after  
entering standby, the Player may not turn on. If this  
happens, wait for 10 seconds or more and then  
turn on the power again.  
DISPLAYS THE TITLE LIST  
SETTINGS  
POWER  
ON SCREEN LANGUAGE  
3
4
Press a/b/c/d to select the  
language you want to display on the  
screen, then press ENTER.  
DVD/CD mode indicator  
ON indicator  
BD mode indicator  
MENU [ON SCREEN LANGUAGE]  
ENGLISH  
ESPAÑOL  
FRANÇAIS  
STANDBY indicator  
Indicators on the Player  
ON indicator  
Green on  
Power on  
Press SETUP or EXIT to exit.  
STANDBY indicator  
NOTE  
Red blinks  
Red on  
Preparing for standby  
Standby  
To select the DVD disc language, such as subtitle  
language, etc., (See page 25)  
BD and DVD/CD mode indicators  
Off  
No disc  
Blue on  
White on  
White blinks  
Playing back  
Disc stopped  
Loading a disc  
• When you turn on the POWER, the MENU screen  
automatically displays for a while.  
Press EXIT to erase the display.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Starting Playback  
Turning Off the LCD  
Using AQUOS LINK  
Backlight and Indications  
Controlling the Blu-ray disc  
player using AQUOS LINK  
If you feel that the indicators on the Player are  
too bright when watching movies, you can turn  
them off except for the ON indicator.  
What is AQUOS LINK?  
Using the HDMI CEC(Consumer Electronics  
Control), with AQUOS LINK you can  
interactively operate this player with your  
SHARP AQUOS TV.  
Quick operation  
Press LIGHT to turn the LCD backlight  
on or off.  
What you can do with AQUOS LINK  
When you connect this player to the LCD TV  
compatible with AQUOS LINK using an HDMI  
cable, you can perform the function listed  
below. (See page 14 for connecting to the  
HDMI terminal)  
SETUP MENU operation  
1
2
3
Press SETUP to display the SETUP  
MENU screen.  
Press a/b/c/d to select  
“SETTINGS”, then press ENTER.  
Playback function turns on the LCD TV  
immediately.  
When you start to playback of this player,  
Power of LCD TV will be turned on and the  
playback image will appear on the screen.  
Press a/b to select “FRONT  
DISPLAY/LED”, then press ENTER.  
MENU [FRONT DISPLAY / LED]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
Automatic input select function  
When you start playback of this player, the  
input selector of the LCD TV will automatically  
switch to the LCD TV input terminal connected  
to the player and the playback image will  
appear on the screen, even if you are watching  
a TV program.  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
SOFTWARE UPDATE  
SYSTEM RESET  
Automatic power off function  
If you turn off the LCD TV when this player is  
in stop mode, the power of this player will be  
turned off automatically. (In the case, while  
playing back a disc, the power does not turn  
off.)  
4
5
Press c/d to select “ON” or  
“OFF”, then press ENTER.  
Press SETUP or EXIT to exit.  
Automatic power on function  
When you switch to the LCD TV input terminal  
connected to this player, the power of this  
player will be turned on automatically.  
NOTE  
• In order to make AQUOS LINK available, set up  
AQUOS LINK on the LCD TV that is connected to  
this player. See page 40 regarding the setup of this  
player.  
Refer to the Operation Manual of the TV for details  
regarding setup.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD/DVD/CD Playback  
This section explains playback of commercially  
available BD Video and DVD Video discs (like  
movies), CDs, and recorded DVD-RW/R discs.  
BD/DVD Video Playback  
DVD VIDEO  
BD VIDEO  
Loading a Disc  
1
2
Load a disc.  
• Playback may begin automatically,  
depending on the disc.  
1
2
Press POWER to turn on the power.  
Press dPLAY.  
Press OPEN/CLOSE to open the  
disc tray.  
• Playback begins from the first title.  
• The menu may be displayed first,  
depending on the disc. Perform  
playback operation by following the  
directions on the screen.  
POWER  
OPEN/CLOSE  
To stop playback  
Press H STOP.  
3
4
Load a disc on the disc tray.  
Resume playback function  
• If you press dPLAY next, playback will resume  
from the point where the Player was previously  
stopped. To playback from the beginning, cancel  
resume mode by pressing HSTOP, then press  
dPLAY. (This may not work depending on the  
type of disc. In this case, open the disc tray or  
enter standby.)  
• Insert the disc with the label face up.  
• In case of disc recorded on both sides,  
face down the side to play back.  
Press OPEN/CLOSE to close the  
disc tray.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD/DVD/CD Playback  
Using the disc menu  
BD/DVD Menus  
Example: Select “SUBTITLE LANGUAGE”.  
DVD VIDEO  
BD VIDEO  
1
2
Press POP-UP MENU.  
• The disc menu screen is displayed.  
• This section explains how to play back a BD/DVD  
video disc with a top menu or disc menu.  
• The titles listed in the top menu and a disc guide  
(for options like subtitles and audio languages) are  
given in the disc menu.  
Press a/b to select “SUBTITLE  
LANGUAGE”, then press ENTER.  
• The screen for selecting the subtitle  
language is displayed.  
Start playback by selecting a  
title from the top menu  
MENU  
1
2
3
AUDIO LANGUAGE  
SUBTITLE LANGUAGE  
AUDIO  
1
Press TOP MENU.  
• The top menu screen is displayed.  
T O P M E N U  
1
3
2
4
Jazz  
Latin  
Rock  
Classic  
3
4
Press a/b to select the subtitle  
language, then press ENTER.  
2
Press a/b/c/d to select the title,  
then press ENTER.  
SUBTITLE LANGUAGE  
• The selected title is played back.  
1
2
3
English  
Español  
Français  
NOTE  
• The procedure explained on this page is the basic  
operation procedure. Procedures vary depending  
on the BD/DVD video disc, so you may need to  
follow the instructions in the BD/DVD video disc  
manual or the instructions displayed on the screen.  
• A top menu is not displayed for a DVD-RW/R  
(Video mode) if it has not been finalized.  
Top menu  
Press SETUP or EXIT to exit.  
• With some BD/DVD discs, the top menu may be  
referred to as the “Title Menu”. Use TOP MENU  
on the remote control when the instructions refer  
to “Title Menu”.  
• If no top menu is available, the TOP MENU button  
will have no effect.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD/DVD/CD Playback  
BD-R/-RE/DVD-R/-RW Playback  
DVD-RW  
BD-RE  
DVD-R  
BD-R  
You can play back a disc recorded. (finalized disc only)  
Playback from the beginning  
1
2
Load a disc recorded in Video mode.  
Press dPLAY.  
• Playback begins from title 1.  
Playback by selecting a title  
1
2
Load a disc recorded in Video mode.  
Press TOP MENU.  
• The TITLE LIST screen is displayed.  
• The TITLE LIST screen also can be displayed  
by pressing ENTER after choosing  
DISPLAYS THE TITLE LIST” in SETUP  
MENU  
DISPLAYS THE TITLE LIST  
SETTINGS  
ON SCREEN LANGUAGE  
• When more than seven titles are displayed, switch pages by pressing KSKIP or  
LSKIP.  
MENU [TITLE LIST (DVD: ORIGINAL)]  
PROGRAM 1  
9:30 AM 110 MIN.  
Information of selected title  
5/21  
FRI  
[FROM OLD]  
1
2
3
4
PROGRAM 1  
PROGRAM 2  
PROGRAM 3  
PROGRAM 4  
5/21  
8/15  
7/3  
FRI  
FRI  
110 MIN.  
110 MIN.  
MON 56 MIN.  
THU 40 MIN.  
Title Name  
9/18  
Recording Date  
Recording Duration  
B
C
D
SORTING  
PLAYLIST  
FUNCTIONS  
Caption for Color Button  
3
4
Press a/b to select the title, then press ENTER .  
• Playback of the selected title will begin.  
You can playback by pressing d PLAY instead of pressing ENTER.  
Press H STOP to stop playback.  
NOTE  
• “Finalize” in this manual refers to making sure to have a recording device process on the recorded disc so that  
it will play in other DVD players as well as this player. Only finalized discs will playback in this player.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BD/DVD/CD Playback  
Playback by selecting a PLAY  
LIST  
Playing back the title you  
stopped while being played.  
1
2
3
Load a disc recorded in Video  
mode.  
1
Press D (Yellow) while the TITLE  
LIST screen is displayed.  
Press TOP MENU.  
• The TITLE LIST screen is displayed.  
MENU [TITLE LIST (DVD: ORIGINAL)]  
PROGRAM 1  
9:30 AM 110 MIN.  
Press C (Blue), then press ENTER.  
• The PLAY LIST screen is displayed.  
5/21  
FRI  
PLAYBACK  
MENU [TITLE LIST (DVD: PLAYLIST)]  
PROGRAM 1  
9:30 AM 110 MIN.  
5/21  
FRI  
FROM BEGINNING  
FROM CONTINUED  
1
2
PROGRAM 1  
PROGRAM 2  
5/21  
8/15  
FRI  
FRI  
110 MIN.  
110 MIN.  
2
Press c/d to select the type of  
Playback, then press ENTER .  
• Playback of the title will begin.  
C
D
PLAYLIST  
FUNCTIONS  
4
Press a/b to select the title, then  
press ENTER  
NOTE  
• Playback of the selected title will begin  
• If a disc recorded in Video mode has been  
finalized, a menu screen will be created  
5
Press H STOP to stop playback.  
automatically to enable playback with other  
BD/DVD players. Because of this reason, the menu  
screen is different before and after finalization.  
• “Finalize” in this manual refers to making sure to  
have a recording device process on the recorded  
disc so that it will play in other DVD players as well  
as this player. Only finalized discs will playback in  
this player.  
Sorting the titles  
1
Press B (Green), then press ENTER  
while The TITLE LIST screen is  
displayed.  
2
Select the type of sorting by  
pressing a/b, then press ENTER.  
Audio CD Playback  
MENU [TITLE LIST (DVD: ORIGINAL)]  
Playback from the beginning  
PROGRAM 1  
9:30 AM 110 MIN.  
5/21  
FRI  
1
2
Load an audio CD.  
FROM NEW  
FROM OLD  
TITLES  
Press dPLAY.  
• Playback begins from the first track.  
3
Press H STOP to stop playback.  
B
C
D
SORTING  
PLAYLIST  
FUNCTIONS  
• The displayed titles are rearranged by  
selected sorting type.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Functions  
BD VIDEO  
DVD VIDEO  
AUDIO CD  
BD-RE  
BD-R  
Repeat Playback of a  
Title or Chapter (Repeat  
Playback)  
DVD-R DVD-RW  
Fast Forward/Reverse  
(Search)  
1
Play back the title or chapter you  
want to repeat.  
Fast Forward/Reverse functions when G  
REV or J FWD is pressed during playback.  
Example: When J FWD is pressed  
• The search speed will cycle as follows each time  
you press the button.  
2
3
Press REPEAT.  
Press c/d to select the type of  
Repeat Playback.  
PLAYING BACK TITLE: Repeats the  
title currently being played back.  
PLAYING BACK CHAP: Repeats the  
chapter currently being played back.  
SCENE SELECTION: Repeats the  
specified scene of title or chapter.  
When playing back a DVD  
You cannot fast forward or fast reverse from one  
title and continue to another title (except when  
playing audio CDs).  
Skipping to the Next or  
the Start of the Current  
Chapter (Track)  
PLAY BACK TITLE  
PLAY BACK CHAP  
SCENE SELECTION  
Skipping (to the beginning of a chapter or track)  
functions when T SKIP or U SKIP is  
pressed during playback.  
• Press n RETURN to cancel without  
setting the type of Repeat Playback.  
• For Audio CD, you can select  
“PLAYING DISC” “PLAYING TRACK”  
and “SPECIFY THE PART” as Repeat  
Playback options.  
Slow Playback  
Slow Playback functions when SLOW is  
pressed during playback.  
• This doesn't work for audio CDs.  
4
5
Press ENTER.  
Example: Repeat playback of a title  
(TITLE)  
• Press d PLAY to return to normal playback.  
Pause/Frame Advance  
Playback  
• Pause functions when F PAUSE is pressed  
during playback. (If you are playing back an audio  
CD, the CD will also pause.)  
• Frame Advance Playback functions when U  
SKIP is pressed during Pause.  
• Frame Advance Playback may not function  
properly with discs other than DVD-RW (VR mode).  
• Some BD/DVD Video discs are not compatible  
with Pause/Frame Advance Playback.  
TITLE REPEAT  
Press REPEAT-OFF to return to  
normal playback.  
Enlarge the playback image  
(Zoom function)  
Skip Search  
1
Press ZOOM k while playback.  
• Three steps can be operated.  
• Some discs will not be performed on  
this player.  
Playback skips 30 seconds ahead when SKIP  
SEARCH is pressed during playback.  
Replay  
2
3
The area that you want to watch is  
moved using a/b/c/d.  
Playback jumps back 10 seconds when  
REPLAY is pressed during playback.  
If you want to return the image,  
press ZOOM l.  
Press ZOOM l several times until  
it will return.  
NOTE  
• This function is not available for AUDIO CD.  
• Zoom function will not operate when subtitle is set  
to ON.  
• Zoom function will be cancelled when G REV or  
J FWD is pressed.  
• Zoom function will be cancelled when F PAUSE  
is pressed, depending on the disc.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Functions  
Partial Repeat Playback  
Switching Audio  
(Repeat Playback of a  
Specified Part)  
You can change the audio output channel using  
AUDIO.  
Each time AUDIO is pressed, the audio  
channels change as follows:  
1
Press REPEAT during playback.  
BD VIDEO  
DVD VIDEO  
2
Press c/d to select “SCENE  
The audio track currently being played back will  
be displayed.  
SELECTION”, then press ENTER.  
DVD-RW  
VR MODE  
DVD-R  
BD-RE  
BD-R  
When a recorded broadcast with a  
Secondary Audio Program is played back:  
Switches between “L”, “R” and “L+R”.  
When a recorded broadcast with stereo or  
monaural audio is played back:  
“Stereo” is displayed. (Audio cannot be  
switched.)  
PLAY BACK TITLE  
PLAY BACK CHAP  
SCENE SELECTION  
SET START POINT  
NOTE  
• When you play a program recorded in stereo  
or monaural, and if you are listening to the  
BITSTREAM sound via the digital output jack, you  
cannot select the audio channel. Set “AUDIO OUT”  
to “PCM” (page 35), or if you want to change the  
audio channel, listen via the analog output jacks.  
3
4
“SET START POINT” displays, press  
ENTER at the scene where you  
want.  
• “SET END POINT” displays.  
Press ENTER at the scene where  
you want to set the end point.  
You can press V FWD to fast  
forward to the scene where you want  
to set the end point. When you reach  
the desired scene, simply press I  
PLAY and then ENTER to set the end  
point. To cancel Repeat Playback,  
press REPEAT-OFF.  
Switching Subtitles  
If subtitles are provided in multiple languages,  
you can switch between them.  
Press SUBTITLE during playback.  
• The display indicates the subtitle number currently  
being played back, and the subtitles appear.  
Each time SUBTITLE is pressed, the subtitles  
change.  
NOTE  
• Press LSKIP, the Repeat Playback is  
cancelled and the next chapter being played back.  
• Press KSKIP once, the Repeat Playback  
is cancelled and the player returns to the start of  
current chapter (track).  
• “– –” is displayed if a disc has no subtitles.  
You can also select “OFF”.  
• If you press KSKIP again (within about 5  
seconds) the player will skip to the beginning of the  
previous chapter (track).  
• For Partial Repeat Playback, set the start and end  
points within the same title.  
• Repeat Playback may be forbidden depending on  
the disc.  
• Partial Repeat Playback may not work in multi-  
angle scenes.  
• If you press DISPLAY, you can confirm the Repeat  
Playback status.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Functions  
NOTE  
Switching the Angle  
• Settings for audio, subtitles and angle can be  
changed also in Function Control Screen. (Page  
31)  
If multiple angles are recorded, you can switch  
between them.  
• The operations of subtitles, angle and audio differ  
according to each disc. You may need to refer to  
the operation manual of the disc.  
• The following operations will not work when  
playing back an audio CD:  
1
Press ANGLE during playback.  
• The display indicates the angle number  
currently being played back. Each time  
you press ANGLE, the angle switches.  
• “– –” is displayed if a disc is recorded  
with only one angle.  
Slow Playback, Frame Advance  
Display of functions  
• The display for subtitles, angle or audio  
automatically disappears after 5 seconds.  
Switching between functions  
You can switch the subtitles, angle and audio at the  
Function Control screen. (Page 31)  
1
VID.  
– –  
• The operation for each function varies depending  
on the disc. See the manual for the disc.  
Fast Forward/Reverse  
You cannot perform Fast Forward/Fast Reverse  
between titles. At the end or beginning of the title,  
Fast Forward/Fast Reverse will be cancelled and  
normal playback will automatically resume.  
• Subtitles are not played back with BD/DVD video  
discs during Fast Forward and Fast Reverse.  
• Depending on the disc and the scene being played  
back, the Player may not operate at the speed  
listed in this manual when performing Fast Forward.  
To return to the previous angle, press ANGLE  
to cycle through the angles until you return to  
the original angle.  
Slow Playback  
You cannot perform Slow Playback between  
titles. At the end of the title, Slow Playback will be  
cancelled and normal playback will automatically  
resume.  
Repeat Playback  
• Repeat Playback may be forbidden depending on  
the disc.  
• Partial Repeat Playback may not work in multi-  
angle scenes.  
• For Partial Repeat Playback, set the start and end  
points within the same title.  
Displaying the Angle Mark  
You can change settings so that Angle  
Mark appears in the right bottom part of the  
screen when multiple angles are recorded.  
The settings can be changed in “SETTINGS”  
- “PLAYBACK SETTING” - “ANGLE MARK  
DISPLAY”. (Page 41)  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings During Playback  
Function control operation  
procedure  
Function Control  
This allows you to adjust various settings at  
once, like subtitles, angle settings and the title  
selection for Direct Playback. You can adjust  
the video and audio to suit your preferences.  
The operations are the same for BD and DVD.  
1
Press FUNCTION during playback.  
• The Function Control screen is  
displayed on the TV.  
BD VIDEO  
1 / 3  
Function control screen  
5 / 25  
00 : 20 : 30  
2 ENGLISH  
1
BD VIDEO  
1
1 / 3  
1
5 . 1ch  
5 / 25  
OFF  
00 : 20 : 30  
2 ENGLISH  
1
2
1
OFF  
5 . 1ch  
ENTER  
SELECT  
ENTER  
RETURN  
2
Press a/b to select the desired  
setting, then press ENTER.  
• For a description of each setting, see  
“Functions which can be set”. (Page 32)  
ENTER  
SELECT  
ENTER  
RETURN  
3
BD VIDEO  
1 Playback status display  
Shows the operation status and the disc type.  
1 / 3  
5 / 25  
00 : 20 : 30  
2 ENGLISH  
1
2 Setting items  
Selects a title or chapter for playback, or  
performs video/audio settings.  
1
5 . 1ch  
OFF  
3 Operation guide display  
Provides help on remote control button  
operations.  
ENTER  
SELECT  
ENTER  
RETURN  
3
4
Press a/b/c/d to set, then press  
ENTER.  
• Operations vary depending on  
the setting. Follow the operation  
instructions on the screen.  
Press RETURN or FUNCTION to  
close the Function Control screen.  
NOTE  
• If “– –” is displayed for an option like title number  
or subtitles, the disc has no titles or subtitles which  
can be selected.  
• The displayed items vary depending on the disc.  
• If you access the Function Control screen during  
playback of a BD/DVD video, it may be impossible  
to operate the BD/DVD video playback. In cases  
like this, close the Function Control screen.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings During Playback  
Functions which can be set  
Title Number (Direct Title Skip)  
• Shows the title number being played back. You  
can skip to the start of the title.  
To skip to the start of a selected title, press  
the Number buttons to enter the title number  
when this option is highlighted.  
Chapter Number (Direct Chapter Skip)  
• Shows the chapter number being played back.  
You can skip to the start of the chapter.  
To skip to the start of a selected chapter, press  
the Number buttons to enter the chapter  
number when this option is highlighted.  
Playback Elapsed Time (Direct Time Skip)  
• Shows the elapsed time from the beginning of  
the disc to the present. This lets you skip to a  
specific time.  
• Press c/d to select the Hour, Minute or  
Second, then press a/b or the Number  
buttons to set the time. Press ENTER to start  
playback at the set time.  
NOTE  
ENTER button under the Cover: Enters the input  
number.  
CLEAR button under the Cover: Clears the input  
number.  
Subtitle Language  
• Shows the currently selected subtitle language.  
If subtitles are provided in other languages, you  
can switch to your preferred language.  
Angle Number  
• Shows the currently selected angle number. If  
the video is recorded with multiple angles, you  
can switch the angle.  
Audio  
• Shows the currently selected type of audio. You  
can select the desired type of audio.  
Repeat  
• The current Title (or Chapter) or partial  
segments can be repeatedly played back.  
Repeat Playback is also possible with the  
REPEAT button on the remote control.  
NOTE  
• These functions may not work with all discs.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
AUDIO VIDEO SETTINGS  
TV ASPECT RATIO  
• If you switch your TV (i.e. because you have bought a new one) and the screen aspect ratio of the  
connected TV changes, you will have to change the “TV ASPECT RATIO” setting.  
You can set the screen aspect ratio of the connected TV, and adjust the video output.  
• Select “TV ASPECT RATIO” from “AUDIO VIDEO SETTINGS”.  
WIDE 16:9  
NORMAL 4:3  
MENU [AUDIO VIDEO SETTINGS - TV ASPECT RATIO]  
MENU [AUDIO VIDEO SETTINGS]  
WIDE 16:9: Select this  
when connecting to a  
TV with a 16:9 screen  
aspect ratio.  
NORMAL 4:3: Select  
this when connecting to  
a TV with a 4:3 screen  
aspect ratio.  
TV ASPECT RATIO  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
HDMI AUTO DETECTION  
AUDIO OUT  
AUTO POWER OFF  
AQUOS LINK  
16 : 9  
4 : 3  
DYNAMIC RANGE CONTROL  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
WIDE  
NORMAL  
SOFTWARE UPDATE  
SYSTEM RESET  
MENU [AUDIO VIDEO SETTINGS - TV ASPECT RATIO]  
LETTER BOX,  
PAN SCAN  
TV ASPECT RATIO  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
HDMI AUTO DETECTION  
AUDIO OUT  
DYNAMIC RANGE CONTROL  
<When selecting NORMAL 4:3>  
LETTER BOX: If you connect to a TV with a screen aspect  
ratio of 4:3 and playback a DVD with 16:9 video, the  
video will be played back with black bands at the top and  
bottom while maintaining the 16:9 ratio.  
PAN SCAN: If you connect to a TV with a screen aspect  
ratio of 4:3 and playback a DVD with 16:9 video, the video  
will be played back with the left and right sides of the  
image cut off to display in 4:3 screen aspect ratio. (This  
function works if the disc is labelled for 4:3PS.)  
LETTER BOX  
PAN SCAN  
COMPONENT VIDEO OUT  
• This sets the resolution of the component video output.  
1080i, 720p,  
480p, 480i  
MENU [AUDIO VIDEO SETTINGS - COMPONENT VIDEO OUT]  
MENU [AUDIO VIDEO SETTINGS]  
TV ASPECT RATIO  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
HDMI AUTO DETECTION  
AUDIO OUT  
AUTO POWER OFF  
AQUOS LINK  
DYNAMIC RANGE CONTROL  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
SOFTWARE UPDATE  
SYSTEM RESET  
1080i  
480p  
720p  
480i  
• Some TV are not fully compatible with the Blu-ray disc player, which may cause the image distortion. In this  
case, press “COMPONENT RESET” on the remote control for five seconds. Component video out will be  
reset to 480i (factory preset value).  
Caution: HDMI output and Component output can not be used at the same time.  
HDMI VIDEO OUT  
• This sets the resolution of the HDMI video output.  
MENU [AUDIO VIDEO SETTINGS - HDMI VIDEO OUT]  
MENU [AUDIO VIDEO SETTINGS]  
AUTO,  
1080p, 1080i,  
720p, 480p  
TV ASPECT RATIO  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
HDMI AUTO DETECTION  
AUDIO OUT  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
AUTO POWER OFF  
AQUOS LINK  
DYNAMIC RANGE CONTROL  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
AUTO  
1080p  
720p  
1080i  
480p  
SOFTWARE UPDATE  
SYSTEM RESET  
Caution: HDMI output and Component output can not be used at the same time.  
NOTE  
• When the BD player is connected to a 1080p 24Hz compatible TV and the HDMI VIDEO OUT is set to AUTO, 1080p  
24Hz will automatically be displayed when compatible discs are played back.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
HDMI AUTO DETECTION  
• This automatically sets the players video output to HDMI when it detects this signal.  
YES, NO  
MENU [AUDIO VIDEO SETTINGS - HDMI AUTO DETECTION]  
MENU [AUDIO VIDEO SETTINGS]  
TV ASPECT RATIO  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
HDMI AUTO DETECTION  
AUDIO OUT  
AUTO POWER OFF  
AQUOS LINK  
DYNAMIC RANGE CONTROL  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
SOFTWARE UPDATE  
SYSTEM RESET  
YES  
NO  
AUDIO OUT  
HDMI  
OUTPUT  
You can set AUDIO OUT when connecting to SURROUND sound equipment.  
1. This sets the audio output connected to SURROUND equipment.  
MENU [AUDIO VIDEO SETTINGS - AUDIO OUT]  
OPTICAL/  
COAXIAL  
DIGITAL  
TV ASPECT RATIO  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
HDMI AUTO DETECTION  
AUDIO OUT  
HDMI OUTPUT  
OPTICAL / COAXIAL DIGITAL OUTPUT  
5.1 ch AUDIO OUTPUT  
OUTPUTT  
DYNAMIC RANGE CONTROL  
5.1ch AUDIO  
OUTPUT  
2ch AUDIO OUTPUT  
2ch AUDIO  
OUTPUT  
Selected item  
HDMI OUTPUT  
Description  
Select this when you connect using HDMI OUT terminal.  
OPTICAL/COAXIAL DIGITAL OUTPUT Select this when you connect using DIGITAL AUDIO OUT terminal  
(COAXIAL or OPTICAL).  
5.1ch AUDIO OUTPUT  
2ch AUDIO OUTPUT  
Select this when you connect using 5.1CH AUDIO OUT jacks.  
Select this when you do not use SURROUND sound equipment.  
2. You can set the audio output mode for each output terminal.  
1 This sets the audio output mode for HDMI OUT terminal when selecting HDMI OUTPUT.  
AUTO  
MENU [AUDIO VIDEO SETTINGS - AUDIO OUT]  
PCM  
TV ASPECT RATIO  
(SURROUND)  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
HDMI AUTO DETECTION  
AUDIO OUT  
AUTO  
DYNAMIC RANGE CONTROL  
PCM (SURROUND)  
Selected item  
Description  
AUTO  
• Select this when connecting to HDMI equipment with a built-in decoder  
for DOLBY DIGITAL, etc.  
• Setting to AUTO will output in an audio output mode best suited to the  
connected equipment.  
PCM (SURROUND)  
• Select this when connecting to multi-channel HDMI equipment.  
• Setting to PCM (SURROUND) will output by LINEAR PCM by decoding  
audio signals recorded in each audio output mode such as DOLBY  
DIGITAL, DTS, AAC.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
2 This sets the audio output mode for DIGITAL AUDIO OUT (COAXIAL jack / OPTICAL terminal) when selecting  
OPTICAL/COAXIAL DIGITAL OUTPUT or 2ch AUDIO OUTPUT  
DOLBY  
DIGITAL  
MENU [AUDIO VIDEO SETTINGS - AUDIO OUT]  
TV ASPECT RATIO  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
HDMI AUTO DETECTION  
AUDIO OUT  
DTS  
AAC  
DOLBY DIGITAL  
BITSTREM  
DTS  
BITSTREM  
AAC  
PCM (STEREO)  
PCM (STEREO)  
PCM (STEREO)  
DYNAMIC RANGE CONTROL  
BITSTREM  
BITSTREAM  
PCM  
(STEREO)  
CONFIRM  
Selected item  
BITSTREAM  
Description  
DOLBY DIGITAL  
• Select this when connecting to SURROUND  
equipment with a built-in decoder for DOLBY DIGITAL,  
DTS, AAC.  
DTS  
AAC  
• Setting to BITSTREAM will output each audio signal  
by BITSTREAM.  
PCM (STEREO)  
• Select this when connecting to 2 channel stereo audio  
equipment.  
• Setting to PCM (STEREO) will output by converting  
each audio signal into PCM 2channel audio signal.  
DYNAMIC RANGE CONTROL  
• This lets you adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume.  
Use this when it is hard to hear dialogue.  
SHIFT,  
NORMAL  
MENU [AUDIO VIDEO SETTINGS - DYNAMIC RANGE CONTROL]  
NORMAL*: The some  
MENU [AUDIO VIDEO SETTINGS]  
audio output range is  
TV ASPECT RATIO  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
HDMI AUTO DETECTION  
AUDIO OUT  
DYNAMIC RANGE CONTROL  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
played as the original  
recorded audio output  
range.  
SHIFT: When Dolby  
Digital audio is played  
back, the dynamic  
range of the audio is  
adjusted so that the  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
NORMAL  
SHIFT  
SOFTWARE UPDATE  
SYSTEM RESET  
dialogue portion can be  
heard easily. (If the audio  
sounds abnormal, set to  
“NORMAL”.)  
* Lower the audio volume before setting. If you do not do so, the speakers may emit a loud sound or excessive output  
may be applied to the speakers.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
4
5
Press a/b to select “TV ASPECT RATIO”, then  
Basic Operation for AUDIO VIDEO  
SETTINGS  
press ENTER.  
Press c/d to select the desired item, then  
press ENTER.  
Example: Setting “TV ASPECT RATIO” under “AUDIO VIDEO  
SETTING”  
MENU [AUDIO VIDEO SETTINGS - TV ASPECT RATIO]  
1
2
Press SETUP to display the SETUP MENU  
TV ASPECT RATIO  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
HDMI AUTO DETECTION  
AUDIO OUT  
screen.  
Press a/b/c/d to select “SETTINGS”, then  
press ENTER.  
16 : 9  
WIDE  
4 : 3  
DYNAMIC RANGE CONTROL  
NORMAL  
DISPLAYS THE TITLE LIST  
SETTINGS  
6
7
Press c/d to select the desired format, then  
press ENTER.  
MENU [AUDIO VIDEO SETTINGS - TV ASPECT RATIO]  
ON SCREEN LANGUAGE  
TV ASPECT RATIO  
COMPONENT VIDEO OUT  
HDMI VIDEO OUT  
HDMI AUTO DETECTION  
AUDIO OUT  
DYNAMIC RANGE CONTROL  
3
Press a/b to select “AUDIO VIDEO  
SETTINGS”, then press ENTER.  
MENU [AUDIO VIDEO SETTINGS]  
LETTER BOX  
PAN SCAN  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
Press SETUP or EXIT to exit.  
SOFTWARE UPDATE  
SYSTEM RESET  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
SPEAKER SETTINGS  
Basic Operation for SPEAKER  
SETTINGS  
About speakers  
You can use your speakers with this Player through an  
amplifier. You can set the speaker size, distance from the  
viewer, and output level for each speaker.  
1
Press SETUP to display the SETUP MENU  
screen.  
Using multi channel speakers  
2
Press a/b/c/d to select “SETTINGS”, then  
press ENTER.  
Subwoofer (SW)  
Centre speaker (C)  
Front speaker (L)  
Front speaker (R)  
DISPLAYS THE TITLE LIST  
SETTINGS  
ON SCREEN LANGUAGE  
3
Press a/b to select “SPEAKER SETTINGS”,  
then press ENTER.  
MENU [SPEAKER SETTINGS]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
AUTO POWER OFF  
AQUOS LINK  
Surround speaker (LS)  
Surround speaker (RS)  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
Using 2 channel speakers  
SOFTWARE UPDATE  
SYSTEM RESET  
Speaker (L)  
Speaker (R)  
4
Press c/d to select the desired item, then  
press ENTER.  
MENU [SPEAKER SETTINGS]  
YES  
NO  
NOTE  
• Refer to the operation manual for the speakers or amplifier for  
details of speaker setup.  
• Speaker setting cannot be performed with the disc in the disc tray.  
Take out the disc from the player before setup.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
7
Repeat steps 5 and 6 until each speaker’s size,  
and level are set.  
5
Press a/b/c/d to select the speaker, then  
press ENTER.  
MENU [SPEAKER SETTINGS]  
MENU [SPEAKER SETTINGS]  
0dB  
SW  
12ft/0dB  
C
12ft/0dB  
L
0dB  
SW  
12ft/0dB  
C
12t/0dB  
R
12ft/0dB  
L
12t/0dB  
R
LS  
6ft/0dB  
LS  
6ft/0dB  
LS  
6ft/0dB  
LS  
6ft/0dB  
TEST START  
FINISH  
TEST START  
FINISH  
6
Press c/d to select the preferred item, then  
press a/b to select the preferred setting, then  
press ENTER.  
NOTE  
• The speakers L and R, LS and RS move relative to one another.  
• The speakers L and R are automatically set to “LARGE” when the  
subwoofer SW is set to “NO”, even after speakers L and/or R are  
set to “SMALL”.  
MENU [SPEAKER SETTINGS]  
0dB  
SW  
• The images of speakers set to “NONE” disappear or are greyed  
out on the screen.  
• As for a subwoofer, there are no settings for distance only for level.  
12ft/0dB  
12ft/0dB  
L
C
12t/0dB  
R
Checking the setup sound  
LS  
6ft/0dB  
RS  
6ft/0dB  
8
Press a/b/c/d to select “TEST START”, then  
press ENTER.  
SIZE  
DISTANCE  
12ft  
LEVEL  
LARGE  
0dB  
MENU [SPEAKER SETTINGS]  
0dB  
SW  
12ft/0dB  
C
12ft/0dB  
L
Speakers  
Selectable size  
12t/0dB  
R
L/R  
LARGE*, SMALL  
LARGE*, SMALL, NONE  
YES*, NO  
C/RS/LS  
SW  
LS  
6ft/0dB  
RS  
6ft/0dB  
* Factory preset  
TEST START  
FINISH  
LARGE: The cone diameter is 6.3 inches or larger.  
SMALL: The cone diameter is smaller than 6.3 inches.  
• After switching to TEST mode, you can hear the Test  
sound from each speaker in turn.  
Selectable Distance 1ft through 29ft  
range  
(Settings available in 1ft increments)  
• If you press a/b/c/d to select the preferred  
speaker while the TEST sound is present, you  
can hear the TEST sound of the speaker that you  
selected.  
• If you press a/b/c/d to select “TEST TONE  
STOP” and press ENTER, you can stop the Test  
sound  
The factory preset value: 12ft(L/R/C)  
6ft(RS/LS)  
Selectable Output  
Level range  
-6dB through +6dB  
(Settings available in 1dB increments)  
The factory preset value is 0dB.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
Resetting the setup  
• When the sound volume of each speaker is uneven, reset  
the settings separately.  
• As for a subwoofer, you can adjust LEVEL only.  
9
Press ENTER while the TEST sound is present  
from the speaker that you want to reset the  
setting.  
10 Press c/d to select the “LEVEL”, then press  
a/b to preferred setting, then press ENTER.  
11 Repeat steps 9 and 10 until each speaker is  
reset.  
Completing the settings  
12 Press a/b/c/d to select “FINISH”, then press  
ENTER.  
MENU [SPEAKER SETTINGS]  
0dB  
SW  
12ft/0dB  
C
12ft/0dB  
L
12t/0dB  
R
LS  
6ft/0dB  
RS  
6ft/0dB  
TEST START  
FINISH  
13 Press SETUP or EXIT to exit.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
QUICK START  
• This turns the QUICK START function on and off.  
• When the QUICK START function is on, the startup time of the player is reduced when resuming playback  
from standby.  
• However, power consumption will increase.  
YES, NO  
MENU [QUICK START]  
MENU [QUICK START]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
YES  
NO  
SOFTWARE UPDATE  
SYSTEM RESET  
AUTO POWER OFF  
This sets the Player so that power is automatically shut off if playback is stopped for about 10 minutes.  
YES, NO  
MENU [AUTO POWER OFF]  
MENU [AUTO POWER OFF]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
SOFTWARE UPDATE  
SYSTEM RESET  
YES  
NO  
AQUOS LINK  
• This lets you set the Player to receive the control signal from the AQUOS LINK remote control via the HDMI  
cable.  
YES, NO  
MENU [AQUOS LINK]  
MENU [AQUOS LINK]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
SOFTWARE UPDATE  
SYSTEM RESET  
YES  
NO  
• For details, refer to the operation manual of TV.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
PLAYBACK SETTING  
PARENTAL CONTROL  
• This lets you set the Parental Control depending on the disc content.  
• For DVD-video:  
For DVD  
video:  
8 and OFF: All DVD-video can be played.  
OFF,  
1-7: Prohibits play of DVD-video with corresponding ratings recorded on them.  
• For BD-ROM:  
NO LIMIT: All BD-video can be played.  
0-99 year(s): Prohibits play of BD-video with corresponding ratings recorded on them.  
• Parental Control Level cannot be set if a password has not been set.  
LEVEL 1-8  
For BD -  
ROM:  
NO LIMIT.  
LEVEL 0-99  
MENU [PLAYBACK SETTING]  
MENU [PLAYBACK SETTINGS - PARENTAL CONTROL]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
PARENTAL CONTROL  
DISC LANGUAGE  
ANGLE MARK DISPLAY  
PIN CODE SETTING  
LEVEL 3  
COUNTRY  
CODE  
* Refer to  
the Country  
Code List.  
(Page 42)  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
0
SOFTWARE UPDATE  
SYSTEM RESET  
USA  
• Refer to “Basic Operation for PLAYBACK SETTING” on page 43 for details.  
DISC LANGUAGE (DISC PRIORITY LANGUAGE)  
• This lets you select the language for subtitles, audio and menus displayed on the screen.  
SUBTITLE,  
AUDIO,  
MENU [PLAYBACK SETTINGS - DISC LANGUAGE]  
MENU [PLAYBACK SETTING]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
PARENTAL CONTROL  
DISC LANGUAGE  
ANGLE MARK DISPLAY  
MENU  
* Refer to the  
Language  
Code List.  
(Page 42)  
SUBTITLE  
AUDIO  
ENGLISH  
AUTO POWER OFF  
AQUOS LINK  
PIN CODE SETTING  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
ENGLISH  
ENGLISH  
SOFTWARE UPDATE  
SYSTEM RESET  
MENU  
ANGLE MARK DISPLAY  
• This lets you turn the Angle Mark Display on or off when DVD video recorded with multiple angles is played  
back. (The Angle Mark is displayed in the lower right screen.)  
YES, NO  
MENU [PLAYBACK SETTINGS - ANGLE MARK DISPLAY]  
MENU [PLAYBACK SETTING]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
PARENTAL CONTROL  
DISC LANGUAGE  
ANGLE MARK DISPLAY  
PIN CODE SETTING  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
SOFTWARE UPDATE  
SYSTEM RESET  
YES  
NO  
PIN CODE SETTING  
• This sets the password for setting or changing the Parental Control Level.  
YES, NO  
4 digit  
number  
MENU [PLAYBACK SETTING]  
MENU [PLAYBACK SETTINGS - PARENTAL CONTROL]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
AUTO POWER OFF  
AQUOS LINK  
-
-
-
-
-
-
-
-
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
SOFTWARE UPDATE  
SYSTEM RESET  
NOTE  
• When you forget the PIN code, you can reset the current PIN code using SYSTEM RESET under SETTINGS. (p.44)  
You can also set the new PIN code if desired.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
Country Code List  
USA  
UK  
HOLLAND  
NORWAY  
DENMARK  
FINLAND  
BELGIUM  
HONG KONG  
SINGAPORE  
THAILAND  
TAIWAN  
CANADA  
JAPAN  
ITALY  
PHILIPPINE  
AUSTRALIA  
RUSSIA  
SPAIN  
GERMANY  
FRANCE  
SWISS  
SWEDEN  
MALAYSIA  
INDONESIA  
CHINA  
Language Code List  
AA Afar  
EU Basque  
KK Kazakh  
OM Afan (Oromo)  
OR Oriya  
SW Swahili  
TA Tamil  
AB Abkhazian  
AF Afrikaans  
AM Ameharic  
AR Arabic  
FA Persian  
FI Finnish  
KL Greenlandic  
KM Cambodian  
KN Kannada  
KO Korean  
PA Panjabi  
TE Telugu  
TG Tajik  
FJ Fiji  
PL Polish  
FO Faroese  
FR French  
FY Frisian  
PS Pashto, Pushto  
PT Portuguese  
QU Quechua  
RM Rhaeto-Romance  
RN Kirundi  
TH Thai  
AS Assamese  
AY Aymara  
AZ Azerbaijani  
BA Bashkir  
BE Byelorussian  
BG Bulgarian  
BH Bihari  
KS Kashmiri  
KU Kurdish  
KY Kirghiz  
TI Tigrinya  
TK Turkmen  
TL Tagalog  
TN Setswana  
TO Tonga  
TR Turkish  
TS Tsonga  
TT Tatar  
GA Irish  
GD Scots Gaelic  
GL Galician  
GN Guarani  
GU Gujarati  
HA Hausa  
LA Latin  
LN Lingala  
RO Romanian  
RU Russian  
LO Laothian  
LT Lithuanian  
LV Latvian, Lettish  
MG Malagasy  
MI Maori  
RW Kinyarwanda  
SA Sanskrit  
BI Bislama  
BN Bengali, Bangla  
BO Tibetan  
BR Breton  
HI Hindi  
SD Sindhi  
TW Twi  
HR Croatian  
HU Hungarian  
HY Armenian  
IA Interlingua  
IE Interlingue  
IK Inupiak  
SG Sangho  
UK Ukrainian  
UR Urdu  
MK Macedonian  
ML Malayalam  
MN Mongolian  
MO Moldavian  
MR Marathi  
MS Malay  
SH Serbo-Croatian  
SI Singhalese  
SK Slovak  
CA Catalan  
CO Corsican  
CS Czech  
UZ Uzbek  
VI Vietnamese  
VO Volapük  
WO Wolof  
XH Xhosa  
YO Yoruba  
ZH Chinese  
ZU Zulu  
SL Slovenian  
SM Samoan  
SN Shona  
CY Welsh  
DA Danish  
IN Indonesian  
IS Icelandic  
IT Italian  
DE German  
DZ Bhutani  
EL Greek  
MT Maltese  
MY Burmese  
NA Nauru  
SO Somali  
SQ Albanian  
SR Serbian  
IW Hebrew  
JA Japanese  
JI Yiddish  
EN English  
NE Nepali  
SS Siswat  
EO Esperanto  
ES Spanish  
ET Estonian  
NL Dutch  
ST Sesotho  
JW Javanese  
KA Georgian  
NO Norwegian  
OC Occitan  
SU Sundanese  
SV Swedish  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
6
Press c/d to select parental control level for  
DVD video, then press ENTER.  
Press c/d to select parental control level for  
BD-ROM, then press ENTER.  
Press c/d to select the country code, then  
press ENTER.  
Basic Operation for PLAYBACK  
SETTING  
Example: Setting “PARENTAL CONTROL” under  
“PLAYBACK SETTING”.  
1
2
Press SETUP to display the SETUP MENU  
MENU [PLAYBACK SETTINGS - PARENTAL CONTROL]  
screen.  
PARENTAL CONTROL  
DISC LANGUAGE  
ANGLE MARK DISPLAY  
PIN CODE SETTING  
LEVEL 3  
Press a/b/c/d to select “SETTINGS”, then  
press ENTER.  
0
USA  
DISPLAYS THE TITLE LIST  
SETTINGS  
7
Press SETUP or EXIT to exit.  
ON SCREEN LANGUAGE  
3
Press a/b to select “PLAYBACK SETTING”,  
then press ENTER.  
MENU [PLAYBACK SETTING]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
SOFTWARE UPDATE  
SYSTEM RESET  
When setting the password for the first time.  
1. Press c/d to select “YES” to enter the password  
setting menu, then press ENTER.  
2. Enter the 4-digit number.  
3. Press ENTER to move to the next setting screen.  
4
5
Press a/b to select “PARENTAL CONTROL”,  
then press ENTER.  
Enter your password.  
You cannot move to the next setting screen until you  
can input the correct password.  
MENU [PLAYBACK SETTINGS - PARENTAL CONTROL]  
-
-
-
-
-
-
-
-
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
FRONT DISPLAY/LED  
• If you feel that the indicators on the Player are too bright when watching movies, you can turn them off  
except for the ON indicator.  
MENU [FRONT DISPLAY/LED]  
ON, OFF  
MENU [FRONT DISPLAY / LED]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
ON  
OFF  
SOFTWARE UPDATE  
SYSTEM RESET  
VERSION  
• When you select “VERSION”, the system software version is displayed.  
SYSTEM RESET  
You can reset all settings except the password to the factory presets.  
RESET,  
MENU [SYSTEM RESET]  
MENU [SYSTEM RESET]  
NOT RESET  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
RESET  
NOT RESET  
SOFTWARE UPDATE  
SYSTEM RESET  
Common operation  
Example: Setting “FRONT DISPLAY/LED”  
3
Press a/b to select “FRONT DISPLAY/LED”,  
then press ENTER.  
1
2
Press SETUP to display the SETUP MENU  
screen.  
MENU [FRONT DISPLAY / LED]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
Press a/b/c/d to select “SETTINGS”, then  
press ENTER.  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
SOFTWARE UPDATE  
SYSTEM RESET  
DISPLAYS THE TITLE LIST  
SETTINGS  
4
5
Press c/d to select the desired item, then  
ON SCREEN LANGUAGE  
press ENTER.  
MENU [FRONT DISPLAY/LED]  
ON  
OFF  
Press SETUP or EXIT to exit.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
7
During the data checking,  
“Checking” blinks.  
SOFTWARE UPDATE  
This function allows software updates by  
inserting a USB memory device with the update  
file into the SERVICE terminal on this player.  
Regarding how to obtain the software  
update file, please call 1-800-BE-SHARP.  
NOW CHECKING THE DATA IN USB MEMORY DEVICE.  
CAUTION  
CHECKING  
Do not remove the USB memory device or  
unplug the AC cord while the software is  
being updated.  
• The current version of this unit software  
and the version of the update file on  
the USB memory device are displayed.  
To update this player software with  
update file, select “YES”, and press  
ENTER.  
1
Insert the USB memory device with  
the update file into the SERVICE  
terminal on rear of this player.  
2
3
4
Press SETUP to display the SETUP  
SOFTWARE UPDATE FILE IS DETECTED  
IN THE USB MEMORY DEVICE.  
START UPDATE?  
MENU screen.  
Press a/b/c/d to select  
“SETTINGS”, then press ENTER.  
CURRENT VERSION  
UPDATE VERSION  
**1234567  
**1234567  
Press a/b to select “SOFTWARE  
UPDATE”, then ENTER.  
• If you already set the password, go to  
step 6.  
YES  
NO  
• If the USB memory device is not  
properly installed or the correct update  
file cannot be found on the USB  
memory device, an error message is  
displayed.  
MENU [SOFTWARE UPDATE]  
AUDIO VIDEO SETTINGS  
SPEAKER SETTINGS  
QUICK START  
Check the file on the USB memory  
device, and then reinsert the USB  
memory device correctly.  
AUTO POWER OFF  
AQUOS LINK  
PLAYBACK SETTING  
FRONT DISPLAY / LED  
VERSION  
SOFTWARE UPDATE  
SYSTEM RESET  
SOFTWARE UPDATE FILE IS NOT DETECTED  
IN THE USB MEMORY DEVICE.  
CONFIRM THAT YOU HAVE TRANSFERRED THE FILE  
TO THE USB MEMORY DEVICE AND RETRY SOFTWARE UPDATE.  
5
6
Enter the 4-digit number using 0-9.  
OK  
ENTER 4-DIGIT PIN CODE  
THERE IS MORE THAN ONE SOFTWARE FILE  
IN THE USB MEMORY DEVICE.  
CONFIRM THAT ONLY THE SOFTWARE UPDATE FILE IS  
IN THE USB MEMORY DEVICE.  
OK  
Press ENTER to start checking data  
in the USB memory device.  
INSERT USB MEMORY DEVICE CONTAINING  
THE SOFTWARE UPDATE FILE.  
OK  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTINGS  
8
Press ENTER to start updating.  
• The screen becomes dark for a  
while until the update screen can be  
displayed. Please wait for the update  
screen to appear. Do not unplug the  
AC cord.  
THE PICTURE WILL TEMPORARILY GO DARK UNTIL  
THE SOFTWARE UPDATE DISPLAY APPEARS.  
WAIT SEVERAL MINUTES AND DO NOT UNPLUG THE AC CORD.  
OK  
NOW UPDATING  
DO NOT UNPLUG AC CORD.  
*
UPDATE VERSION  
**1234567-2  
30%  
9
When the software is successfully  
updated, a screen is displayed  
indicating that the update process  
is completed.  
After this screen is displayed, the  
unit automatically turns off and then  
turns on again.  
SOFTWARE UPDATE IS COMPLETE.  
UPDATE VERSION  
**1234567  
• If the update has failed, check the file  
in the USB device and try Software  
Update again.  
10 The message “SYSTEM  
SOFTWARE WAS SUCCESSFULLY  
UPDATED” is displayed, and then  
press ENTER .  
11 Remove the USB memory device.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
The following problems do not always suggest a defect or malfunction of this Player.  
Refer to the problems and lists of possible solutions below before calling for service.  
The Player power cannot be turned on.  
Screen freezes and operation buttons do not work.  
• Is the power cord firmly plugged into the AC outlet?  
• When the power cord is plugged into an AC outlet, press  
• Press H STOP, then restart playback.  
Turn off the power and turn on the power again.  
• If the power is not turned off, perform a reset. (Page 48)  
• Is the disc damaged or dirty? Check the condition of the  
disc. See page 10 for details about disc cleaning.  
and hold POWER on the Player until “  
” appears  
on the front panel display. Then, after the STANDBY  
indicator is lit, turn on the power. (Page 48)  
• Press POWER after the STANDBY indicator turns on.  
The remote control does not work.  
• Set the remote control and the Player to the same remote  
control code. (Page 21)  
• Use the remote control within its operating range.  
• Replace the batteries.  
The disc is automatically ejected after closing the disc  
tray.  
• Make sure that the disc is loaded properly (aligned in disc  
tray and label-side up).  
Take out the disc and clean it.  
• Make sure that region code on the disc matches that of  
this Player.  
• Make sure that the disc is playable.  
No sound, or sound is distorted.  
• If the volume of the TV or amplifier is set to minimum, turn  
the volume up.  
• There is no sound during still mode, slow motion playback,  
fast forward and fast reverse.  
• DVD audio recorded in DTS is only output from the  
DIGITAL AUDIO OUT terminal or jack. Connect a DTS  
compatible digital amplifier or decoder to the DIGITAL  
AUDIO OUT OPTICAL terminal or COAXIAL jack on this  
Player.  
• Check that the audio cable is connected correctly.  
• Check that the cable plugs are clean.  
Take out the disc and clean it.  
• Audio may not be output depending on the audio  
recording status, such as when audio other than an audio  
signal or non-standard audio is recorded for the audio  
content of the disc.  
No picture.  
• Make sure that the cables are connected correctly.  
• Make sure that the connected TV or the AV receiver is set  
to the correct input.  
Take out the disc and clean it.  
• Make sure that region code on the disc matches that of  
this Player.  
• There is no picture from the HDMI output.  
- Are the settings performed correctly? Please check the  
settings.  
• There is no picture from the Component output.  
- Are the settings performed correctly? Please check the  
settings.  
The Player cannot play a disc.  
The playback screen will be disturbed if DVD video is  
recorded to a VCR, or played back through a VCR.  
• This Player complies with analogue copy protection.  
Some discs contain a copy prohibiting signal. If you try to  
play back such discs through a VCR, or record to a VCR  
and play back the signal, the copy protection will prevent  
normal playback.  
Take out the disc and clean it.  
• Make sure that the disc is loaded properly (aligned in disc  
tray and label-side up).  
• Make sure that region code on the disc matches that of  
this Player.  
• Allow any condensation in or near the Player to dry.  
• Check that the disc is recorded in the compatible TV  
system (PAL or NTSC).  
The TV operates incorrectly.  
• The Player cannot play back video which was not recorded  
normally.  
• Proper playback may be impossible due to the state of the  
disc recording, a scratched, warped or dirty disc, the state  
of the pick-up, or compatibility issues between this Player  
and the disc being used.  
• Some TVs with wireless remote control capability may  
operate incorrectly when using the remote control of this  
Player. Use such TVs away from this Player.  
There is just audio with no video.  
• Is the connection cable for video output connected  
properly?  
• When the recorded time of a disc is unusually short,  
playback may not be possible.  
Widescreen video appears vertically stretched, or black  
bands appear at the top and bottom of the screen.  
• Is “TV ASPECT RATIO” set to match the connected TV?  
(Page 33)  
• If you are using a widescreen TV, is the “TV ASPECT  
RATIO” set to “WIDE”? (Page 33)  
The settings have been erased.  
• If the Player is unplugged (or there is a power failure) for  
more than about 1 hour while its power is on, the settings  
will be lost. Make sure that you turn off the Player before  
unplugging the power cord.  
• When there is a power interruption or the power cord is  
unplugged from the power outlet with the power on, all  
settings return to the factory preset values.  
The Player power is turned off.  
• Is “AUTO POWER OFF” set to “YES”? When “AUTO  
POWER OFF” is set to “YES”, the power will be  
automatically turned off after 10 continuous minutes of  
inactivity (no playback).  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
STANDBY indicator will remain lit.  
Square noise (mosaic) appears on the screen.  
• Blocks in images may be visible in scenes with rapid  
movement due to the characteristics of digital image  
compression technology.  
• When the AC cord is removed from the outlet, the STANDBY  
indicator will remain lit for a short period. This is normal and is not  
a malfunction.  
NOTE  
Reset  
Video stops.  
• Has the Player been subjected to shock or impact? Are  
you using it in an unstable location? The Player will stop if  
it senses shock or vibration.  
• If this Player receives strong interference from a source such as  
excessive static electricity, strong external noise, malfunction  
of power supply, or voltage caused by lightning during use or a  
wrong operation is sent to the Player, errors like the Player not  
accepting an operation may occur. Press and hold POWER on the  
Left and right channels of audio are reversed, or sound  
comes out of only one side.  
• Are left and right audio cables connected to the opposite  
terminal, or is one side disconnected?  
Player until “  
” appears on the front panel display when the  
Player does not operate properly even after the power has been  
turned off. Then, after the STANDBY indicator is lit, turn on the  
power.  
• When a reset is performed while the power is on, the Player will  
turn off. Turn the power on again. At this point, it may take a few  
moments for the system processing to finish before the Player is  
ready for use. During the system processing, the BD and DVD/CD  
mode indicators on the front panel display of the Player will blink.  
Once the system processing has finished, the indicators will finish  
blinking and then light up normally. You can operate the Player  
when the BD and DVD/CD mode indicators are lit.  
• Since all settings including the language setting stored in memory  
are also reset when a reset has been performed, they must be set  
again.  
• When the problem persists even after performing a reset, unplug  
the AC cord and plug it in again. If this does not solve the problem,  
contact the nearest service center approved by SHARP.  
Disc does not play back automatically.  
• Have you set a disc that has an automatic playback  
function?  
The Player heats up during use.  
• When using this Player, the console cabinet may heat  
up depending on the usage environment. This is not a  
malfunction.  
The Player makes a snapping sound when starting  
playback or loading a disc.  
• The player may sometimes make a snapping sound when  
starting playback if it has not been operated in a while.  
These sounds are not malfunctions of the player but are  
normal operating conditions.  
Cannot operate the Player.  
• Are you operating the Player within the specified operating  
temperature range? (Page 52)  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-screen Error Messages  
Messages Relating to BD and DVD  
• The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the operation  
is not correct.  
Error message  
CANNOT PLAY.  
Possible Error  
Suggested Solution  
• The disc cannot be played back with • Check the disc, and load it correctly.  
this Player.  
INCOMPATIBLE DISC.  
• If you load a disc which cannot  
be played with this Player (i.e. a  
scratched disc), or if you load a  
disc upside down, this message  
will appear, and the disc tray will  
automatically pop out.  
• Occurs if the loaded disc cannot be  
played because it is a non-standard  
disc or scratched, etc.  
• Remove the disc.  
_____________  
CANNOT OPERATE.  
• Occurs if an operation is incorrect.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
The BD-ROM format supports Java for interactive functions.  
“BD-J” offers content providers almost unlimited functionality  
when creating interactive BD-ROM titles.  
BD-J application  
DTS  
This is a digital sound system developed by DTS, Inc. for use  
in cinemas. This system uses 6 audio channels and provides  
accurate sound field positioning and realistic acoustics. (By  
connecting a DTS Digital Surround decoder, you can also  
listen to DTS Digital Surround sound.)  
BD-R (pages 6, 26)  
A BD-R (Blu-ray Disc Recordable) is a recordable, write-once  
Blu-ray Disc. Since contents can be recorded and cannot  
be overwritten, a BD-R can be used to archive data or for  
storing and distributing video material.  
DVD video (pages 6, 7, 24)  
A disc format that contains up to eight hours of moving  
pictures on a disc the same diameter as a CD. A single-layer  
single sided DVD holds up to 4.7 GB; a double layer single-  
sided DVD, 8.5 GB; a single layer double-sided DVD, 9.4  
GB; double-layer double-sided DVD, 17 GB. The MPEG 2  
format was adopted for efficient video data compression. It is  
a variable rate technology that encodes the data to according  
to the status of the video for reproducing high-quality images.  
Audio information is recorded in a multi-channel format such  
as Dolby Digital, allowing for a realistic audio presence.  
BD-RE (pages 6, 26)  
A BD-RE (Blu-ray Disc Rewritable) is a recordable and  
rewritable Blu-ray Disc.  
BD-ROM  
BD-ROMs (Blu-ray Disc Read-Only Memory) are  
commercially produced discs. Other than conventional movie  
and video contents, these discs have enhanced features  
such as interactive content, menu operations using pop-  
up menus, selection of subtitle display, and slide shows.  
Although a BD-ROM may contain any form of data, most  
BD-ROM discs will contain movies in High Definition format  
for playback on Blu-ray Disc players.  
DVD+/-R (pages 6, 26)  
A DVD+/-R is a recordable, write-once DVD. Since contents  
can be recorded and cannot be overwritten, a DVD+/-R  
can be used to archive data or for storing and distributing  
video material. The DVD+/-R has two different modes:  
VR mode and Video mode. DVDs created in Video mode  
have the same format as a DVD video, while discs created  
in VR (Video Recording) mode allow the contents to be  
programmed or edited.  
Blu-ray Disc (BD) (page 6)  
A disc format developed for recording/playing high-definition  
(HD) video (for HDTV, etc.), and for storing large amounts of  
data. A single layer Blu-ray Disc holds up to 25 GB, and a  
dual-layer Blu-ray Disc holds up to 50 GB of data.  
DVD+/-RW (pages 6, 26)  
A DVD+/-RW is a recordable and rewritable DVD. The re-  
recordable feature makes editing possible. The DVD+/-RW  
has two different modes: VR mode and Video mode. DVDs  
created in Video mode have the same format as a DVD  
video, while discs created in VR (Video Recording) mode  
allow the contents to be programmed or edited.  
Chapter number (page 32)  
Sections of a movie or a music feature that are smaller than  
titles. A title is composed of several chapters. Some discs  
may only be comprised of a single chapter.  
Copy guard  
HDMI  
This function prevents copying. You cannot copy discs  
marked by the copyright holder with a signal which prevents  
copying.  
HDMI (High-Definition Multimedia Interface) is an interface  
that supports both video and audio on a single digital  
connection. The HDMI connection carries standard to high  
definition video signals and multi-channel audio signals to  
AV components such as HDMI equipped TVs, in digital form  
without degradation.  
Disc menu (page 25)  
This lets you select things like the subtitle language or audio  
format using a menu stored on the DVD video disc.  
Interlace format  
Dolby Digital  
Interlace format shows every other line of an image as a  
single “field” and is the standard method for displaying  
images on television. The even numbered field shows the  
even numbered lines of an image, and the odd numbered  
field shows the odd numbered lines of an image.  
A sound system developed by Dolby Laboratories Inc. that  
gives movie theatre ambience to audio output when the  
product is connected to a Dolby Digital processor or amplifier.  
Dolby Digital Plus  
A sound system developed as an extension to Dolby Digital,  
this audio coding technology supports 5.1 multi-channel  
surround sound.  
Letter Box (LB 4:3) (page 33)  
A screen size with black bars on the top and bottom of the  
image to allow viewing of wide-screen (16:9) material on a  
connected 4:3 TV.  
Dolby TrueHD  
Dolby TrueHD is a lossless coding technology that supports  
up to 8 channels of multi-channel surround sound for the  
next generation optical discs. The reproduced sound is true  
to the original source bit-for-bit.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Linear PCM Sound  
Resume playback (page 24)  
Linear PCM is a signal recording format used for Audio CDs  
and on some DVD and Blu-ray discs. The sound on Audio  
CDs is recorded at 44.1 kHz with 16 bits. (Sound is recorded  
between 48 kHz with 16 bits and 96 kHz with 24 bits on DVD  
video discs and between 48 kHz with 16 bits and 192 kHz  
with 24 bits on BD video discs.)  
If you stop playback while it is in progress, the Player stores  
the stop position in memory, and this function lets you  
playback from that point.  
Skip (page 28)  
This returns to the start of the chapter (or track) being played,  
or skips to the next chapter (or track).  
MPEG-2  
MPEG-2 (Moving Picture Experts Group phase 2) is one of  
the video data compression schemes, which is adopted for  
DVD videos and digital broadcasts worldwide. Some Blu-ray  
Discs also use high bitrate MPEG-2.  
Subtitles (pages 29, 31, 32)  
These are the lines of text appearing at the bottom of the  
screen which translate or transcribe the dialogue. They are  
recorded on many DVD and BD video discs.  
Multi Angle (pages 30, 31)  
Time number  
This is a feature of DVD and BD video discs. In some discs,  
the same scene is shot from different angles, and these are  
stored in a single disc so you can enjoy playback from each  
angle. (This function can be enjoyed if the disc is recorded  
with multiple angles.)  
This indicates the play time which has elapsed from the start  
of a disc or a title. It can be used to find a specific scene  
quickly. (It may not work with some discs.)  
Title number (pages 31, 32)  
These numbers are recorded on DVD and Blu-ray discs.  
When a disc contains two or more movies, these movies are  
numbered as title 1, title 2, etc.  
Multi Audio  
This is a feature of DVD and BD video discs. This function  
makes it possible to record different audio tracks for the  
same video, so you can enhance your enjoyment by  
switching the audio. (You can enjoy this function with discs  
recorded with multiple audio tracks.)  
Top menu (page 25)  
In a BD/DVD video, this is the menu for selecting things like  
the chapter to be played back and the subtitle language. In  
some DVD videos, the top menu may be called the “Title  
Menu”.  
Pan Scan (PS 4:3) (page 33)  
A screen size that cuts off the sides of the image to allow  
viewing of wide-screen (16:9) material on a connected 4:3 TV.  
Track number  
These numbers are assigned to the tracks which are  
recorded on audio CDs. They enable specific tracks to be  
located quickly.  
Parental control (page 41)  
In some digital broadcasts and BD/DVD video discs, a  
control level for disc viewing is set depending on the age of  
the viewer. With this Player, you can set the control level for  
viewing such broadcasts and discs.  
Pop-up menu (page 25)  
An enhanced menu operation available on BD video discs.  
The pop-up menu appears when POP-UP MENU is pressed  
during playback, and can be operated while playback is in  
progress.  
Progressive format  
Compared to the Interlace format that alternately shows  
every other line of an image (field) to create one frame, the  
Progressive format shows the entire image at once as a  
single frame. This means that while the Interlace format can  
show 30 frames/60 fields in one second, the Progressive  
format can show 60 frames in one second. The overall  
picture quality increases and still images, text, and horizontal  
lines appear sharper.  
Region code (page 6)  
Code identifying a geographic region of compatibility for a  
BD/DVD.  
Remote control code (page 21)  
This is the type of the remote control signal for operating  
the Player. There are three types of remote control signals:  
“Remote Control No. 1” (RC-1), “Remote Control No. 2” (RC-  
2) and “Remote Control No. 3” (RC-3).  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Power supply  
AC 120V, 60Hz  
Power consumption (Normal)  
Power consumption (Standby)  
Dimensions  
25 W  
0.5 W (When “FRONT DISPLAY/LED” is set to “ON”)  
/ /  
Approx. 16 59 64 X 2 11 16 X 13 3/16 inch (W x H x D)  
Weight  
Approx. 4.0 kg  
5°C to 35°C  
Operating temperature  
Storage temperature  
Operating humidity  
TV systems  
–20°C to 55°C  
10 % to 80 % (no condensation)  
NTSC system, 525 lines, 60 fields  
Playback  
Playable discs  
BD-ROM, BD-RE (Ver. 2.1 1L), BD-R (Ver. 1.1 1L), DVD Video, DVD-R DL, DVD-  
RW/R, DVD+RW/R, Audio CD (CD-DA), CD-RW/R (CD-DA)  
Input/Output  
HDMI  
HDMI 19-pin standard connector  
Component video output  
Output level:  
Y: 1 Vp-p (75 ohms)  
PB/CB, PR/CR: 0.7 Vp-p (75 ohms)  
Jacks: RCA jack  
S-Video output  
Y-Output level: 1 Vp-p (75 ohms)  
C-Output level: 0.3 Vp-p (75 ohms)  
Jack: 4 pin mini DIN  
Video output  
Output level: 1 Vp-p (75 ohms)  
Jack: RCA-pin jack  
5.1 ch Audio output  
Output level: 2 V rms (Output impedance: 1K ohms)  
Jacks: RCA jack  
Digital audio optical output  
Digital audio coaxial output  
Audio output  
Terminal: Square Optical terminal  
Jack: RCA jack  
Output level: 2 V rms (Output impedance: 1K ohms)  
Jacks: RCA jack  
Specifications are subject to change without notice.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONSUMER LIMITED WARRANTY  
(Valid for warranty service in the U.S. and PUERTO RICO only)  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the  
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that  
it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured  
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to  
the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover installation  
or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commer-  
cial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by  
consumers in their home or residence.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and  
provide proof of purchase to the servicer.  
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warran-  
ties, express or implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE  
EXCLUDED, ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLI-  
CABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF  
SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY  
FROM STATE TO STATE.  
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclu-  
sive remedy available to the purchaser and only for the time periods set forth herein. No other representations or prom-  
ises made by anyone are permitted. Correction of defects, in the manner and for the period of time described herein,  
shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the  
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or other-  
wise. Sharp does not warrant nor shall Sharp be liable, or in any way responsible, for Products which have been subject  
to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, lack of reasonable care, altera-  
tion, modification, tampering, improper operation or maintenance or any damages or defects in the Product which were  
caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp be  
liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not  
allow limits on warranties or on remedies for breach in certain transactions; in such states, the limits herein may not  
apply.  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA. AND  
PUERTO RICO  
Model Specific Section  
BD-HP20U BLU-RAY DISC PLAYER  
(Be sure to have this information available when you need  
service for your Product.)  
Your Product Model Number & Description:  
Warranty Period for this Product:  
One (1) year parts and labor from the date of purchase.  
Additional Item(s) Excluded from  
Warranty Coverage (if any):  
Non-rechargeable batteries.  
Where to Obtain Service:  
From a Sharp Authorized Servicer located in the United  
States. To find the location of the nearest Sharp Authorized  
Servicer, call Sharp toll free at 1-800-BE-SHARP.  
What to do to Obtain Service:  
Please transport the Product in its original packaging and  
ensure that the Product is covered to avoid scratches and  
damage. Sharp shall not be responsible for lost, stolen or  
misdirected mail or for damage to the product incurred  
during shipping.  
TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
SHARP CORPORATION  
Printed in Malaysia  
Imprimé en Malaisie  
Impreso en Malasia  
TINS-D348WJQZ  
07P12-MA-NG  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Headphones RI 300 User Manual
Shark Vacuum Cleaner S1209 User Manual
Sharp Toaster KZ 4S01SS User Manual
Sherwood Stereo Receiver R 963 User Manual
Shiro Cordless Telephone SD8141 User Manual
Singer Sewing Machine K194 User Manual
Snapper Chipper 5 14 SERIES User Manual
Sony CRT Television KP 57XBR10W User Manual
Sony Flat Panel Television 46NX810 User Manual
Tally Genicom Printer 8026DN User Manual