Download from Www.Somanuals.com. All Manuals Search And Download.
Pag.
Pag.
. 15
Index
SD8141
1
1
1
3
3
4
5
6
7
7
7
7
.
PABX code
Call barring
Disabling call barring
Accessories
Technical data
.
.
. 15
. 15
. 16
. 16
. 16
. 16
. 17
. 17
. 17
. 17
. 18
A glance guide tothebuttons on your
handset
.
LCR (Least Cost Routing)
How to enable / disable LCR
How to set LCR “Primary”
How to set LCR “Routable”
How to set LCR “Special”
How to set LCR “Others”
Multi handset configuration
Subscription of optional handset
How to de-subscribe a handset
.
K e y a n d s y m b o l s d e s c r i p t i o n
.
A glance guide to the buttons on the base
.
Installationandset-up
AC/DCadaptorinstallation
Phone line connection
Battery installation
Battery charging
Coverage range
Precautions
Handset On/Off
Beforeusingtheunit, check
.
.
.
7
7
8
8
8
8
8
8
.
.
.
.
.
Intercommunication between handsets . 18
Call transfer between handsets
Conference call
Multi base configuration
. 18
. 18
. 18
How subscribe handset to anotherbase . 19
__
.
Base search
BabySitting(roommonitor)
. 19
19
To make a call_________________________.
.
.
8
9
9
9
9
9
9
9
Pre-dial
How to answer incoming call
Automatic answer
Adjustment of receiver volume
Microphone mute
Put on hold the caller
Last number redial
One of the 10 last numbersredial
R key (recall)
Paging handset
.
.
.
.
.
.
.
.
.
.
.
.
Factory default setting
- Phone book: empty;
- Called numbers list: empty;
- Caller ID list: empty;
- LCR router: disabled with below settings:
Primary= empty;
Others=empty;
Routable*=empty;
Special*= empty
- Handset name:HANDSET;
- Handset ringing volume: 4;
- Handset external ringing tone : 1;
- Handset internal ringing tone .: 5;
- Confirmation beep: enabled;
- Timer: enabled;
- Date & Time: present on display, enabled
automatic setting;
- Alarm: disabled;
9
9
10
10
10
10
11
11
11
11
12
12
12
12
12
13
13
13
13
13
13
14
14
14
14(2)
Out of range indication
Battery level indication
Usingearphone
.
Calleridentify
____
.
.
.
.
.
.
Navigation method into menu
Date & Time setting
Keypad lock
Warning and confirmation tone On/Off
Handset ringer volume setting
Handsetringertonesetting
Base ringer volume setting
Base ringer tone setting
Ringer priority setting
Timer enabling / disabling
Replace handset name
Language display setting
Phone book
To modify entry memory
To delete entry memory
To delete all entry memory
To call entry memory
.
- Base ringing volume:5;
- Base ringing tone: 1;
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
- Ringing priority: disabled;
- Call barring: disabled;
- PIN Code: 0000;
- Dialling mode: Tone (DTMF);
- PABX pause: disabled;
- Baby sitting; disabled;
- Display language: English;
- Handset subscribed: only handset 1;
- Receiver volume: level 3;
*After resetting, remember to input the special and
routable prefix on LCR router (seeparagraph “LCR”).
To store a number fromthe redial list
Alarm setting
PIN code changing
Dialling mode setting
Download from Www.Somanuals.com. All Manuals Search And Download.
2
A glance guide to the buttons on your handset.
The handset
Earpiece
Listening
Display
See page 4.
MEM button
press to make
calls to numbers
stored in memory
FLASH button
you will need this
if your phone is
connected to a PBX,
or if you use Call-
waitting servies
OK button
press during programming
to confirm your selections.
Press and hold to switch the
handset off.
MENU button
Press to start and end the
programming menu.
SD 8141
02899832620
PHONE button
press to begin, answer and
end a telephone call.
C (CLEAR) button
Press during programming to
move back to the previous
menu option, or to clear digits
one by one from the display
MUTE button
REDIAL button
press to display the last 10
numbers you dialled.
UP and DOWN buttons
Press during
Press during a call to mute
the microphone so the
other person could not hear you.
programming to
move through
the menu.
Press during
a call to change
the volume
in the earpiece.
RD
INT button
Press to make an
intercom call if you
have more than one
handset registered to
ther base unit.
INT
/
(Caller Display)
Press to display details of
people who have called you.
SPEAKERPHONE button
press to turn the speaker-
phone on and off.
Charge contact
Charging batteries
Microphone
pick up the voice
Before you can use the handset to make
calls you will need to fit and fully charge
the batteries, as described on pages 6 to 8.
Please read the notes on page 5 before you
install the base unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Key and symbols description
Handset:
: Hook switchkey;
INT : Intercomkeybetweenhandsets;
: phone book access key and flash key ;
\
: mute key, delete key and Menu exit key ;
: Menuaccess key, confirmationkey, handsetOn-Off;
: Rediallistkey/up arrow;
RD
: caller identification list access key and down arrow;
: hands freespeakerphonekey;
Display symbols:
: the handset is in thecoverage area of the base;
: Menuaccess;
: phonebookaccess;
: phone call is in progress (xmeans microphone mute enable);
: handsetringerdisabled;
: baby sittingfeatureenabled;
:not answered call present in thecaller ID list;
:Hands freespeakerphoneis in use;
: keypadis blocked;
: battery levelindication;
Base LED:
NUSE/
NEW CALL
: phone conversation isin progress, when is blinking reflect unanswered calls;
: handsetis in thecradle;
P
: paging key to call handset;
Download from Www.Somanuals.com. All Manuals Search And Download.
4
A quick guide to the buttons on the base.
The Base
Incoming Call Light
Charging Light
Page Button
New Call / In Use
The headset jack
The headset jack let you
use the handset**(optional).
Start by plugging
it into the bottom of
the handset as shown.
** You can purchase the handset from our office or purchase a mobile phone handset(motoroXX type).Make sure
the volume is turned up as the mobile phone handset have different power setting.
The belt clip
If you are using your SD 8141,
you may wish to fit the belt clip to
make the handset easier to
carry.
Fit the belt clip
as shown,
making sure it
clicks firmly
into place
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Installing and using your SD 8141digital cordless telephone
Installation and Setting Up
1
Choose a suitable site for the base unit. Make
sure it is not near to another telephone or
other electrical equipment
DC 9V
2
Plug the main power lead and the
telephone line cord into the back of
the base unit
3
Plug the power adaptor into a 230 V AC,
50 HZ main socket, with the switch on the
socket set to OFF
The SD 8141 base unit must be
used with the power adaptor
supplied with the unit. Using any
other adaptor will result in
non-compliance with En60950.
This will invalidate any
approval given to this apparatus.
4
5
Switch on the power at the socket
Fitting the batteries in the handset
Insert the rechargeable batteries as shown,
making sure they are firmly in place
Fit the battery compartment cover,
sliding it until it clicks firmly into
position
** PleaseDmoawkensuloreathdatfroonlmy REWCHwARwG.ESABoLEmbaatnteurieaslasr.ecuosemd,. All Manuals Search And Download.
6
AC/DC adaptor installation
Connect the plug of the adaptor to the power jack
back, and connect it to the220V socket.
of the base set located at the
Phone line connection
Connect the plug of the telephone line cord to the jack of base set
back, and connect it the line socket.
located at the
Battery installation
1- Remove the battery door;
2- Insert the batteries into the compartment;
3 - Close battery door.
IMPORTANT: The Nichel-Metal Hydrate battery, when exhausted, must be recycled or
disposed properly.
Battery charging
Put the handset onto the cradle. Charge at least 10 hours when the battery is totally
discharged. The light indicator will light up to show that the handset is in charging
mode. When completely charged, this light indicator will remain on.
Coverage range
The coverage area could be affected from manifold situations. The indication of 300m
outdoor and 50m indoor serves as a guide which is obtainable only in a optimal
conditions of propagation of the signal. However for a better coverage it is advisable to
install the base set in a central position of the building within where the cordless phone
be used.
Precautions
1) Read this manual before using this phone.
2) Avoid direct exposure to solar rays and/ or fronts of heat, as well as to avoid the
installation in damps places and/ or dusty.
3) Do not support objects on the cables and/ or on the phone.
4) Do not use adaptor and/ or batteries diverged from those specified on this
instructions manual or however from those in endowment.
5) In case of storms, disconnect the phone from power and phone lines.
6) Clean by using a slightly dampened cloth. Do not use alcohol, solvents, abrasives,
etc.
7) Do not effect reparations alone. Tampering and/ or uses not in conformity with those
described on the instructions manual will render the warranty void.
8) Shiro Corporation declines any responsibility in case of improper uses or
manipulations not conform with the instructions as described in this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Handset On/Off
Press
key to switch handset On or put it in the cradle for charging. It will switch On
automatically.
To switch Off, hold and press
key for approximately 2 seconds.
Before using the unit, check:
1) The installation wasperformed properly;
2) The batteries havebeen charged properly;
3) The LCD display"OFF" (press
key to switch on handset incase it is off);
To make a call
1) Press key for dialing tone (the baseLED indicator will light up);
2) Dial the desired number;
3) Press
will be off).
key or put the handset in the cradle to end a call (the base LED indicator
NOTE: Pressing
cease the line.
At the end of eachcall, the LCD screen willdisplay the talk time durationfor about 5
key will enable the hands free speaker phone. This key cannot
seconds.
Pre-dial
1) Dial the outgoing number (press
deleted. Alternatively press and holdto delete full number) ;
2) Press key to send a call. The number will be dialout automatically.
key if there is an error. The last digit will be
How to answer incoming call
1)Press
2) Press
key when handset rings;
key to answer directly with thehands free speaker phone.
Automatic answer
When the handset is inthe cradle, lift to answer a call.
ATTENTION: If you have Caller ID service, the automatic answer will be disabled. You
can decide whether to answerthe call.
Adjustment of receiver volume
During a phone conversation, press
or
key to adjust the receiver volume.
RD
Choose from 5 volume levels. 1 being the lowest and 5 the highest. The volume
indication will disappear fromLCD screen after 3 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Microphone mute
During a phone conversation, press
microphone will be disabled, but you will still be able to hear the caller. Press
to restore a phone conversation.
key, the LCD screen will display
. The
again
Putting the caller on hold
During a phone conversation, press the INT key. The other party will hear beeping
sound. Press INT key again to restore thephone conversation.
Last number redial
To dial the last dialled number, take phone line by
last number will be automatically dialed out.
key, then press RD
key. The
One of the last 10 numbers redial
SD 8141 automatically store the last 10 dialled numbers. To call one of them, press
RD
key, and search through the list by
or
keys until the LCD screen
RD
display the desired number.
R Key (recall)
\
Pressing
key during a phone conversation allows you to access to the
supplementary service of the network (example, the call waiting if subscribed with the
network operator).
Paging handset
Pressing P key of the base, the handset will ring. This function can be useful, for
example, to locate the handset. Press any key on the handset toend a paging call.
Out of range indication
Please note that the conversationwill be cut off ifyou are far from coveredrange of the
base set. The symbol
willblink on theLCDscreen.
Battery level indication
LCD will display 4 battery levels:
displayed
charging.
= full;
, , it indicates that the battery is flat. Put handset in the cradle for
middle;
= low. If the symbol is
Using earphone
Sd8141 is equipped with a 2.5mm jack where it can be connected to one standard
earphone typically used for mobile phone.
ATTENTION: select the proper earphone making sure it is the standard type
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Caller Identity (workable only if subscribed withnetwork operator)
SD8141 is able to display the caller number. If the caller number is stored into the
phone book, the name will be displayed. It stores the last 20 calls automatically (the
symbol
answered). To see the caller list, press
content. Pressing when the number is displayed, will reflect the date and time of
thecall. Ifyou press again key, display willshow "SAVE? ".Ifyou press key
again, you can store the call number on the phonebook. Input the location name of
on LCD screen and the light
on the base will blink when the call is not
key and then keys to list the
RD
this number and press
number.
However, if you wish to delete the caller number, press
key to confirm the name and press
key to confirm the
key when display shows
"SAVE? ". The display will show"DELETE". Confirmby pressing the key.
ATTENTION: Date and timeare available only onPSTN lines and noton ISDN lines.
If you like to call the number reflected on the LCD screen, press
dialled out automatically.
key and it will be
Navigation method into menu
SD8141 is endowed with anintuitive system of listed menuand sub-menu. The
Key allows input into the main tree of menu. Pressing RD
menu tobelisted. Pressing key allows input to thesub- menu.
Pressing the key allows you to return to the previous menu. Press and hold the
or
keys allow the
same key allows you to escape from menuand come back in the stand-by mode.
NOTE: For the subsequent steps, the procedure to input the main menu will not be
mentioned anymore .
Date & Time setting
SD8141 is equipped with automatic clock setting system. If you are using it with an
analogue line PSTN (not ISDN) with the caller ID enabled, the clock will be set
automatically when there is an incoming call. Otherwise, the clock have to be set
manually with the following procedure:
- under sub- menu "HANDSET", search for "CLOCK". Enter this menu and select "SET
key. Set month
key. Setdate.
CLOCK". Set hours then press
thenpress
key . Set minutes then press
Press
to confirm. To auto setting, go to sub-menu, "CLOCK", search for
and set"YES "if you like the auto setting orselect"NO". Press
to confirm. This will automatically set the handset’s date and time based on the
FSK CID of the PSTNnetwork.
“AUTOMATIC”. Select
Under the sub- menu, go to "CLOCK ", press "OK ". If you prefer not to display the clock
onto the LCD Screen, press "OFF". Press toconfirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Keypad lock
To lock the handset keypad:
- enter sub-menu "KEY LOCK" which is in the main menu. Choose "YES " (lock enabled) or
"NO" (lockdisabled), press
To unlockkeypad, press
toconfirm.
keythreetimes.
Warning and confirmation tone On/Off
There will be a warning beep when the phone is Out of range, Low Battery,
Confirmation at Programming and Key Click. These tonescan be disabled by:
- enter sub- menu "HANDSET" which is in the main menu, search for "TONES". Enter this
menu and search for the tone you wont to disable or enable between "KEY ,RANGE,
LOW BATT " and "CONFIRM", press
disabled), press toconfirm.
, select "YES " (tone enabled) or "NO " (tone
Handset ringer volume setting
You can set up to 4 different volume levels or disable the handset ringer (handset will
not ring). To set, follow this procedure:
- enter sub-menu "HANDSET" which is in the main menu, search for "RINGER". Select the
desired volume level by RD
symbol will be displayed on LCD screen). Press
or
keys (included for ringer off -"VOL OFF",”,
to confirm.
Alternatively, with an incoming call, adjust the ringer volume directly by pressing RD
or keys.
Handset ringer tone setting
Set up to 5 different ringer tones. You can also set a different ringer tone for incoming
call and intercom call. To set, follow as below:
- enter sub-menu "HANDSET" which is in the main menu, search for "EXT RING" for the
incoming call, or "INT RING" for the intercom call. Press
the or keys. Press to confirm.
and set the desired tone by
RD
Base ringer volume setting
Set up to 5 different volume levels or disable ringer (base will not ring). To set, follow as
below:
- enter sub-menu"BASE" which is in the mainmenu, search for"RINGER".
Press
or
and select"VOLUME". Press and set the desired volume by RD
keys (included for ringer off - "VOL OFF"). Press to confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Base ringer tone setting
Set up to 5 different ringer tones. To set, follow as below:
- enter sub-menu"BASE" which is in the mainmenu, search for "RINGER".
Press and select"MELODY". Press
keys. Press toconfirm.
and thedesiredtoneby RD
or
Ringer priority setting
Choose the ring setting between base or handset (or handsets) and the number of
times the phone will ring theother unit. To set, follow as below:
- enter sub-menu"BASE" that is on the mainmenu, then select "RINGER". Press
RD
and select "PRIORITY". Press
Select the unit to ring first. Press
rings the other unit will ring. Press
and select "SET UP". Press
follow by
keys, specify after how many
to confirm. The LCD screen will display "PRIORITY",
key.
RD
and
or
press
and select between"YES" or"NO "to enable or disable the ringerpriority.
Timer enabling/disabling
At the end of each call, the conversation time will be reflected on the LCD screen
display. You can disable or enablethis function using the following:
- enter sub-menu"HANDSET" which is in the mainmenu, search for"TIMER".
Press
confirm.
and select between "YES " and "NO" to enable or disable timer. Press
to
Replace handset name
The default name is "HANDSET ". You can change the name up to a maximum of 8
characters. To set, follow as below:
- enter sub-menu"HANDSET" which is in the mainmenu, search for "HS NAME".
Press
key follow by the
key. Delete the old name and input the new name
using the alphanumeric keypad. (Follow the same procedure used to input name into
the phone book). Press
to confirm.
Language display setting
SD8141 is equipped with a multi language menu. To set the language between the
available, follow as below:
- enter sub-menu "LANGUAGE" which is in the main menu. Press
desired language by or keys. Press to confirm.
and select the
RD
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Phone book
SD8141 can store up to 40 alphanumeric memories with name of 8 characters and
numbers of 18 digits. To store, follow as below:
- enter sub-menu "PHONEBOOK" which is in the main menu and select "NEW". Input
name by the alphanumeric keypad (see table below) and press
and press key to confirm. Escape sub-menuor store other location.
NOTE: if there is anerror during setting, press
. Input number
key to delete.
x4
Key
1
2
3
4
5
6
7
8
x1
Space
x2
-
B
E
H
K
N
Q
U
X
x3
1
C
F
I
L
O
R
V
Y
x5
A
D
G
J
M
P
T
W
0
2
3
4
5
6
S
7
9
8
Z
9
0
To modify entry memory
Select"EDIT" under the sub-menu"PHONEBOOK".
Select the name to be modified by pressing
or
key. Press
and, if
RD
necessary, modify the name. Press
charactersor numbers by pressing
and, if necessary, modify the number. Delete
key. Press to confirm.
To delete entry memory
Select "DELETE" under the sub-menu "PHONEBOOK". Select the name to be deleted by
pressing RD or keys. Press to confirm.
To delete all entry memory
Select"DEL ALL" under the sub-menu"PHONEBOOK". Press
NOTE: All data relative to the phonebook will be erased.
to confirm.
To call entry memory
\
Keys. To send a call press
RD
Press
key and look forthename tobecalledby pressing the
key.
or
To store a number from the redial numberlist
RD
Press
until the LCD screen display the desired number. Press
"SAVE? ", press and input theassociated name and press
Key again toconfirm thenumber.
key, look throughtheredialnumber list by pressing the RD
or
keys
key, display will show
key toconfirm, press
To store a number fromthe caller identity, see section under"Caller Identity".
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Alarm setting
SD8141 is equipped with daily alarm. The alarm can be set daily but the alarm time will
reflect the time that was set previously. The alarm duration is 30 seconds. Press any
handset key to stop alarm. To set, follow as below:
- enter sub-menu "HANDSET" which is in the main menu and search for "ALARM". Enter
this sub-menu and select "ALARM TIME". Press
minutesandpress key.
and set hours. Press
key. Set
to
Press either
confirm.
Repeat the last step toenable alarm every day.
or
and select "SET ALARM ". Set "YES " or "NO". Press
RD
PIN code changing
When you perform advanced setting or subscribe to anew handset, a PIN code isused
for the security of Tower. The default PIN code is "0000 ". To set new PIN code, follow as
below:
- enter sub- menu"BASE" which is in the mainmenu and search for"ADVANCED". Press
, LCD screen will display "PIN ". Input old PIN (0000default) and press
. Look for
. LCD screen will display "NEW PIN", input new PIN (maximum
key. LCD screen will display “REPEAT", input new PIN again and
"PIN CODE " and press
8digit)and press
press
toconfirm.
Dialing mode setting
Most of the public telephone centrals use tone (DTMF) dialling which is much more
faster than Pulse dialling. However if your telephone line is connected to an old one,
you will need to set Pulsedialling to dial outgoing numbers. To set, follow as below:
- enter sub-menu"BASE" which is in the mainmenu and search for"ADVANCED". Press
, LCD screen will display "PIN ”. Input PIN code (0000 default) and press . Look
. Select between "TONE" and "PULSE" and press to
for "DIAL MODE" and press
confirm.
Reset to default value
In case if you need to revert to default setting, reset as follows. This will erase all
memories and Tower will come back todefault setting.
- enter sub-menu"BASE" which is in the mainmenu and search for"ADVANCED". Press
, and LCD screen will display "PIN ". Input PIN code (0000 default) and press
Look for "DEFAULT" and press . LCD screen will display "CONFIRM? ". Press
confirm and it will returnto the default setting.
.
to
NOTE: With the reset, the name of the handset does not returnto the default name.
NOTE: With the reset, the routable and special prefix are deleted, see "LCR "
paragraph to input the defaultprefix.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
PABX code
To obtain an external line, the norm is to dial a ‘0’ or ‘9’ for dial tone if the unit is
connected to a PABX. If you were to program a PABX code, there will be a pause of 3/5
seconds between the line access code (0 or 9) and the number to be dialled out.
When numbers are stored in the phone book, insert ‘0’ or ‘9’ as the first digit for getting
an external line. Set as below:
- enter sub-menu"BASE" which is in the mainmenu and search for"ADVANCED".
Press
Look for"PABX PAUSE" and press
and input the desired digit(normally’ 0’ or ‘9’) andpress
. Select between 3 and 5 seconds which is the pause time to be introduce
automatically, press toconfirm.
, LCD screen will display "PIN ". Input PIN code (0000 default) and press
. LCD screen will display"PABX CODE". Press
. Look for"PAUSE" and press
.
Call barring
SD8141 allows setting of 3 different levels of call barring. You can also specify which
handset to be locked. The barring are "LOCAL" all local numbers will be blocked,
"NATIONAL" all numbers starting with 0 will be blocked, "INTERNATIO" all numbers starting
with 00 will be blocked. To set call barring, follow as below:
- enter sub-menu"BASE" which is in the mainmenu and search for"ADVANCED".
Press
Look for "CALL BAR" and press
, LCD screen will display"PIN ". Input PIN code (0000 default) and press
.
. LCD screen will display "HANDSET 1". Select the
. Now choose between “LOCAL", "NATIONAL"
handset to be blocked and press
and "INTERNATIO". Press
toconfirm.
Disabling call barring
Enter sub-menu "CALL BAR " as described above and press
. LCD screen will display
. Select "NO BARRING "and
"HANDSET 1". Choose the handset to be unlock and press
press
toconfirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
LCR (Least Cost Routing)
SD8141 is equipped with LCR multi carrier system. To understand the operational
method of LCR, there is a need to deepen the routing. Programming the sub-menu
"LCR " allows the routing of the numbers youprefer. To set, follow as below:
-Primary: main secondary network operator towardwhich you want toroute all calls;
- routable: stored the area code, or only the first digit of area code. It must be routed
toward the "PRIMARY" main secondary network access code. You can store up to 5
area code (the following area codes areset as default: 0, 00, 3and 4);
- Special : area code that must not be routed. It is preferable to call with the main
network without routing . Please see page 2 where the area codes set as default are
indicated. You can store up to 10area code.
- others : in this list, other area codes can be stored to be routed with another network
operator.
Please note that the area code which you wish to store here are not inside the
"routable "list.
NOTE: a PIN code (0000 default)is needed when you dothe programming.
Attention
The only way to use the LCR is to made a pre-dial. Dial a number, or recall it from any
memory, and then press
pressed, will not be routed.
key to send a call. All numbers dialled after
key is
How to enable / disableLCR
After programming as described below, enable (or disable if necessary) with the
following: enter sub-menu"LCR "which is in the mainmenu and search for"YES"
toconfirm.
(or"NO"). Press
Setting LCR “Primary”
Enter sub-menu"LCR "which is in the mainmenu and search for "PRIMARY". Press
and enter the network operator code up to maximum 6 digit (ex. 1088). Press
confirm.
to
If you would like to modify the one that is previously stored, repeat the above steps.
Makesure todeletetheold one by using
key.
Setting LCR “Routable”
Enter sub-menu"LCR "which is in the mainmenu and search for"ROUTABLE". Press
and look for “NEW”. Press
toconfirm.
, enter area code of maximum 6 digit and
press
To modify an area code: under sub-menu "ROUTABLE", select "MODIFY". Look for the
area code to be modified and press . Using the key, delete the digit and
enterthenewone. Press to confirm.
To delete an area code: under sub-menu "ROUTABLE", search for "DELETE". Look for the
areacodetobedeleted and press to confirm.
To delete all area code stored: under sub-menu "ROUTABLE", search for "DEL ALL" and
press toconfirm. All areacodes willbedeleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Setting LCR “Special”
Enter sub-menu"LCR "which is in the mainmenu and search for"SPECIAL". Press
, enterareacodeup tomaximum 6digitand press
and look for"NEW". Press
to confirm.
To modify an area code: under sub-menu "SPECIAL", select "MODIFY ". Look for the area
code to be modified and press . By using key, delete the digit and enter new
one. Press to confirm.
To delete an area code: under sub-menu "SPECIAL", search for "DELETE". Look for the
areacodetobedeleted and press to confirm.
To delete all area code stored: under sub-menu "SPECIAL", search for "DEL ALL" and
press toconfirm. All areacodes willbedeleted.
Setting LCR "Others "
Enter sub- menu"LCR "which is in the mainmenu and search for “OTHERS”. Press
and look for"NEW". Press
, enterareacodeup tomaximum 6digitand press
, enternetworkaccess codeup tomaximum 6digitand press
To confirm. Press
toconfirm.
To modify one entry: under sub-menu "OTHERS ", search for "MODIFY ". Look for the area
code / network operator code to be modified and press
thedigitoftheareacodetobemodified. Enter thenewdigitand press the
. Using
key, delete
key.
Delete the digit of network operator code to be modified. Enter new digit and confirm
by pressing the key.
To delete one entry: under sub-menu "OTHERS", search for "DELETE". Look for the area
code/networkoperatorcodeand press to confirm.
To delete all entry: under sub-menu "OTHERS", search for "DEL ALL" and press
confirm. All entry will be deleted.
to
Multi handset configuration
You can subscribe up to 5 handsets to the same base set.
Subscription of optional handset
- Press and hold the base key for about 5 seconds (two beep tone will be hear). The
subscription will completed after 1 minute.
- With handset: enter sub-menu "REGISTER” which is in the main menu. "BS 1 2 3 4 " will
be displayed on the LCD screen (the numbers 1- 4 will blink, indicating that the handset
is already subscribed at the corresponding base number). Choose the base number
andthehandsettobesubscribed(from1to4). Press
to confirm .
Key in the PIN code corresponding to the base set (0000 default) and press
. The
handsetwillstartsearchingandthesubscriptionwillbecompletedinafewseconds.
NOTE:repeattheaboveprocedureifitdoesnotworkthefirsttime.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
De-subscribe an handset
Enter sub- menu "BASE" which is in the main menu and search for"ADVANCED". Press
,"PIN " will be displayed. Enter PIN code (0000 default) and press
. Look for "DEL HS"
. The LCD screen will display "HANDSET 1 ". Choose the handset to be
and press
deletedand press
. "Confirm? " willbedisplayed. Press
toconfirm.
Attention: De-subscription could not be done with the de-subscribed handset that you
areusing
Intercommunicationbetweenhandsets
With 5 handsets, you can do up to 2 intercommunications with 4 handsets and one
handset communicating with external line simultaneously.
To call a handset:
1) Press INTkey and the handset number you wish to dial.
2) The called handset will ring, press
key to answer.
3) Press the same key in both handsets to end a call.
Call transfer between handsets
1) When you are using an external line, press the INTkey (the line will be put on hold).
2) Enter the handset number where you to wish to transfer the call.
3) When the called handset is picked up, an intercom call will be started.
4)Press
key tocompletethetransfer.
Ifthecalledhandsetrefusethecall, press INTtoobtainanexternallineagain.
Conferencecall
A conversation with external line can be extended to another handset. To enable the
conference call, follow the same operation described for call transfer and when the
intercommunication is established, press INT and #. The conference call is now
enabled.
Multi base configuration
With the GAP profile, you can subscribe your handset to 4 different DECT bases (also if
different brand and model) provided that these are of the same profile. In this mode, it
is possible to create an area of wide coverage which, in optimal conditions, allow the
useofahandsetfora maximumdistanceof1200m.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Subscribehandsettoanotherbase
The procedure is the same as those described in "Subscription of optional handset". If
the base where you want to subscribe the SD8141 handset is of a different model,
please follow the instruction manual on how to put it in subscription mode. When you
are done, follow the same procedure described in "Subscription of optional handset".
Do the vice versa when you want to subscribe an handset of different model to the
SD8141 base. Set the base in “subscription mode” by pressing and holding the base
key for about 5 seconds and follow the handset subscription instruction.
NOTE: you need to know the base PIN code where you want to subscribe one handset.
Base search
Sd8141 is continuously searching the base for stronger signal to be connected. If you
want to do it manually, you will need to choose one particular base and follow the
same operation described for the optional handset subscription without pressing the
base key. Then handset will be connected to the selected base.
Baby sitting (room monitor)
With 2 SD8141 handsets, you can set one of them for room monitoring. It will answer
automatically in the case of an internal call. This function is typically used to monitor
children when they sleep in another room. You can set the handset to be put in the
children room as below:
Enter sub-menu "BABYSIT" which is in the main menu and search for ”YES”. Press key
will be displayed). To disable, repeat the above operation
to confirm (the symbol
and select “NO” .
To start monitoring, press INT key and enter the handset number with the baby call
featureenabled. Press key toend monitoring.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
|