INDUCTION COOKTOP
Use & Care Guide
CUBIERTADE INDUCCIÓN
Manual del Usuario
Models, Modelos 790.4280*
* = Color number, número de color
p/n 318200629 (0509)
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Read all instructions before using this appliance. Save these instructions for future reference.
This manual contains important safety symbols & instructions. Please pay attention to these symbols & follow all instructions given.
This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.
This symbol will help alert you to situations that may cause bodily injury or property damage.
• Never modify or alter the construction of an appliance
by removing panels, wire covers or any other part of
the product.
This unit has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 18 of the FCC
rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This unit generates, uses and can radiate radio
frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference
to radio communications. However there is no guarantee
that interference will not occur in a particular installation. If
this unit does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the unit
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Storage on Appliance. Flammable materials should
not be stored near or on the cooking surface. This
includes paper, plastic and cloth items, such as
cookbooks, plasticware and towels, as well as flammable
liquids. Do not store explosives, such as aerosol cans, on
or near the appliance. Flammable materials may explode
and result in fire or property damage.
Do not store items of interest to children
in the cabinets above the appliance.
• Do not leave children alone. Children should not be
left alone or unattended in the area where an
appliance is in use. They should never be allowed to sit
or stand on any part of the appliance.
• Reorient or relocate the receiving antennae.
• Increase the distance between the unit and receiver.
• Connect the unit into an outlet or a circuit different from
that to which the receiver is connected.
Persons with a pacemaker or similar medical
device should exercise caution using or standing near an
induction unit while it is in operation, as the electromagnetic
field may affect the working of the pacemaker or similar
medical device. It would be advisable to consult your Doctor
or the pacemaker or similar medical device manufacturer
about your particular situation.
DO NOT TOUCH COOKING ZONES OR
AREASNEARTHESESURFACES. CookingZonesmaybe
hot from residual heat even though they are dark in color.
Areas near the Cooking Zones may become hot enough to
cause burns. During and after use, do not touch, or let
clothing or other flammable materials touch these areas until
they have had sufficient time to cool.
• Remove all tape and packaging wrap before using
the appliance. Destroy the carton and plastic bags
after unpacking the appliance. Never allow children to
play with packaging material.
Never use your appliance for warming or
heating a room.
• Wear Proper Apparel—Loose-fitting or hanging
garments should never be worn while using the
appliance. Do not let clothing or other flammable materials
contact hot surfaces.
• Proper Installation. Be sure your appliance is
properly installed and grounded by a qualified
technician in accordance with National Electrical
Code ANSI/NFPA No.70-latest edition and local
code requirements. Install only per installation
instructions provided in the literature package for this
appliance.
• Do Not Use Water or Flour on Grease Fires. Smother
the fire with a pan lid, or use baking soda, a dry
chemical or foam-type extinguisher.
• When heating fat or grease, watch it closely. Fat or
grease may catch fire if allowed to become too hot.
Sears Parts & Repair is the recommend qualified
technician and an authorized repair service. Know how to
disconnect the electrical power to the appliance at the
circuit breaker or fuse box in case of an emergency.
• Use Only Dry Potholders. Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
the potholders touch hot heating surface units. Do not use
a towel or other bulky cloth instead of a potholder.
• User Servicing. Do not repair or replace any part of
the appliance unless specifically recommended in
the manuals. All other servicing should be done only by
a qualified technician to reduce the risk of personal injury
and damage to the appliance.
• Do Not Heat Unopened Food Containers. Buildup of
pressure may cause the container to burst and result
in injury.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
IMPORTANT INSTRUCTIONS FOR USING
YOUR INDUCTION COOKTOP
• Ventilatinghood.Theventilatinghoodaboveyourcooking
surface should be cleaned frequently, so the grease from
cooking vapors does not accumulate on the hood or filter.
• Know which touch key pads controls each surface
of the Cooking Zones.
• Clean the appliance regularly to keep all parts free
of grease that could catch fire. Exhaust fan ventilation
hoods and grease filters should be kept clean. Do not
allow grease to accumulate on hood or filter. Greasy
deposits in the fan could catch fire. When flaming food
under the hood, turn fan on. Refer to hood
FOR CERAMIC COOKTOP ONLY
• Do Not Clean or Operate a Broken Cooktop. If cooktop
should break, cleaning solutions and spillovers may
penetrate the broken cooktop and create a risk of electric
shock. Contact a qualified technician immediately.
manufacturer'sinstructionsforcleaning.
• Clean Cooktop with Caution. If a wet sponge or cloth is
usedtowipespillsonahotcookingarea,becarefultoavoid
a steam burn. Some cleaners can produce harmful fumes
if applied to a hot surface.
• UseProperPanSize.Thisapplianceisequippedwithone
or more COOKING ZONES of different sizes. Select
utensils having flat bottoms large enough to cover the
CookingZones.Thepandetectionsensorswillnotallowthe
affected Cooking Zone to operate without a pan present.
• Do Not Place Hot Cookware on Cold Cooktop Glass.
This could cause glass to break.
• UtensilHandlesShouldBeTurnedInwardandShould
Not Extend Over Adjacent Cooking Zones. To reduce
the risk of burns, ignition of flammable materials, and
spillage due to unintentional contact with the utensil.
• Donotslidepansacrossthecooktopsurface. Theymay
scratch the cooktop surface.
• Do not let pans boil dry. This may cause permanent
damageintheformofbreakage,fusion,ormarring thatcan
affect the ceramic-glass cooktop. (This type of damage is
not covered by your warranty).
• Never Leave Prepared Food on the Cooking Zones
Unattended. Boilovers cause smoking and greasy
spillovers that may ignite, or a pan that has boiled dry may
melt or become damaged.
• Protective Liners. Do not use aluminum foil to line any
part of the cooktop. Only use aluminum foil as
recommended afterthecookingprocess,ifusedasacover
to be placed over the food. Any other use of aluminum foil
may result in the risk of electric shock, fire or short circuit.
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth
defects or other productive harm, and requires businesses
to warn customers of potential exposure to such
substances.
• Glazed Cooking Utensils. Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensilsaresuitableforrangetopservicewithoutbreaking
due to the sudden change in temperature. Check the
manufacturer'srecommendationsforcooktopuse.
Induction Cooktop Features
A COOLER COOKTOP -Aunique feature of the Induction Cooktop is whether turned ON or OFF, the cooktop surface
remains cooler than standard ceramic cooktops.
The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The glass
surface may be HOT from residual heat transfered from the cookware and burns may occur.
MAGNETIC DETECTOR - The coil sensor automatically detects whether the pan is magnetic and eliminates accidental
“turn-ONs.”
PAN SIZE DETECTION - The pan recognition sensor automatically detects and adapts the Cooking Zones to the pan sizes
in use.
EFFICIENT - Induction cooking heats faster while using less energy. Induction power levels are quick to boil and when
simmering.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Induction Cooktop Features
READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE INDUCTION COOKTOP
3
1
4
2
9
5
6
9
7
8
Fig 1.
9 Main Cooktop Controls
5 6 7 8
21
Cooking Zone Controls
(at 4 locations)
11
14
18
17
13
12
15
20
19
16
10
Fig 3.
Fig 2.
1. Left Rear Cooking Zone.
2. Left Front Cooking Zone.
3. Right Rear Cooking Zone.
4. Right Front Cooking Zone.
5. Left Rear Cooking Zone Control Pads.
6. Left Front Cooking Zone Control Pads.
7. Right Rear Cooking Zone Control Pads.
8. Right Front Cooking Zone Control Pads.
9. Main Cooktop Controls (See Fig 2).
10. Cooktop Power Key Pad (See p. 6).
11. Cooktop Power Indicator Light (See p. 6).
12. Keep Warm Setting Key Pad (See pages 6 & 10).
13. Controls Lock Key Pad (See pages 6 & 11).
14. Controls Lockout Indicator Light (See pages 6 & 11).
15. Minute Timer Setting Up/DownArrow Key Pads (See p.11).
16. Minute Timer LED (displays up to 99 minutes - (See p. 11).
17. Cooking Zone ON/OFF Key Pad (for each Cooking Zone).
18. Cooking Zone ON/OFF Indicator Light (for each Cooking Zone).
19. Cooking Zone UpArrow Power Key Pad (for each Cooking Zone).
20. Cooking Zone DownArrow Power Key Pad (for each Cooking Zone).
21. Cooking Zone Power Level LED (for each Cooking Zone).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Induction Cooktop Display Messages
LED Messages or Light Indicators Displayed by Main Control
CONTROLS LOCK - This feature allows the cooktop to be locked only when the cooktop is
switched to OFF. Touch and hold the LOCK key pad for 5 seconds. A beep will sound and the
Lock indicator light will glow (Fig. 5). Once locked, no other displays will glow and no Cooking
Zones will activate. To turn the Controls Lock OFF, touch and hold the LOCK key pad for 5
seconds. A beep will sound, the Lock indicator light will turn OFF (Fig. 4) and the cooktop may
be used normally (See p. 11 for more instructions).
Fig. 4
Fig. 6
Fig. 5
Fig. 7
COOKTOP POWER - The Cooktop POWER key pad activates the entire Cooktop. To power
the cooktop, touch and hold the POWER key pad for 2 seconds. A beep will sound and the
Power LED will glow (See Fig. 7). The cooktop will be in a ready mode for 10 seconds. If no
other key pads are touched the Cooktop Main POWER will turn OFF automatically. To turn the
Main Power OFF touch and hold the Main POWER key pad for 1 second. A beep will sound
and the Power Indicator Light will turn OFF (See Fig. 6).
Errors Codes E00 thru E11 - The control displays E in Cooking Zones LEDs (Fig. 8) and digits
in Main Control LED (Fig. 9) together showing an error code. For service call 1-800-4-MY-
HOME® (See back cover of this manual).
Fig. 8
Fig. 9
LED Messages or Light Indicators Displayed by Cooking Zone Controls
COOKING ZONE ON/OFF PAD - Each of the four Cooking Zones have separate ON/OFF key
pads. Once the Main Power key pad has been touched to activate the cooktop, touch the
corresponding Cooking Zone ON/OFF key pad once to active the Cooking Zone needed. 0 will
appear in the LED display. If the corresponding UP/DOWNArrow key pad is not touched within
5 seconds, the request to turn the Cooking Zone ON will cancel and the Cooktop Main Power
will turn OFF. To set a Cooking Zone power level touch the corresponding Cooking Zone UP or
DOWNArrow key pad once. The Cooking Zone ON/OFF Indicator Light will glow (Fig. 11). To
turn OFF a Cooking Zone, touch the Cooking Zone ON/OFF key pad once. The Cooking Zone
Indicator Light will turn OFF (Fig. 10).
Fig. 10
Fig. 12
Fig. 11
Fig.13
POWER LEVEL SETTINGS - The Cooking Zones have four separate Power Level LEDs. Once active, the
Cooking Zones will provide 15 Power Levels to choose from. These include 1 (Fig. 12), 2, 3, 4, 5, 6, 7, 8, 9;
including precise half-increment Cooking Zone Power Levels of 2. (2.5), 3. (3.5), 4. (4.5), 5. (5.5) and 6.
(6.5; See Fig. 14). The highest setting of P or “Power Boost” provides 125% power level for 10 minutes
(See Fig. 13). Each key pad touch (or just holding down the Power Level key pad) will scroll through all the
available power levels for any Cooking Zone quickly (See pages 9-11 for complete instructions).
Fig. 14
Fig. 15
Fig. 16
Fig. 17
RESIDUAL HEAT - Once any Cooking Zone has been used for cooking and turned OFF, and if the cooktop
surface temperature on any of the Cooking Zones is still too HOT, H (See Fig. 15) will appear in the LED
display for the affected Cooking Zone. The H will continue to display if the temperature is still too HOT.
The Cooking Zones may appear to be cool while turned ON and after they have been turned
OFF. The glass surface may be HOT from residual heat transfered from the cookware and burns may
occur.
KEEP WARM - Use the WARM (or LOW) key pad to activate the Warm setting for any of the Cooking
Zones. The ON/OFF key pad for the desired Cooking Zone must be activated first, then touch the WARM
key pad located in the Cooktop Main Control area once to set. L (LOW) should appear in the corresponding
Cooking Zone LED (See Fig. 16 & page 10 for complete information).
PAN DETECTION -All four Cooking Zones will provide a Pan Detection message. If a Cooking Zone is turned
ON and no pan is detected for the Cooking Zone, the pan has been moved or if the pan is not centered
correctly or if the pan is not made of magnetic material, F (See Fig. 17) will appear in the affected Cooking
Zone LED display.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the Cooktop
USE THE CORRECT COOKWARE TYPE - The magnetic Cooking Zone sensors
located below the cooktop surface require the use of cookware made with magnetic
material in order to start the heating process on any of the Cooking Zones.
When purchasing pans, look for cookware specifically identified by the manufacturer
for use with Induction cooktops. If your not sure, use a magnet to test whether the
cookware type will work. If a magnet sticks to the bottom of the cookware, the material
type is correct for Induction cooking (See Fig. 18).
Fig. 18
It is recommended to always use heavier high quality stainless steel cookware on your Induction Cooktop surface. This will
greatly reduce the possibility of developing scratches on the ceramic surface.
Even quality cookware can scratch the cooktop surface, especially if cookware is slid over the ceramic cooktop surface
without being lifted up. Over time sliding ANY type of cookware over the ceramic cooktop will likely alter the overall appear-
ance of the cooktop. Eventually the buildup of scratches will make cleaning the surface difficult and degrade the overall
appearance of the cooktop.
Minimum Pan Size Requirements for each Cooking Zone
NOTE: Pan bottom should not
exceed 1/2” (13mm) from outer
Cooking Zone (Induction) rings
Left Rear
Cooking
Zone
Left Front
Right Rear
Right
Cooking Zone
Cooking Zone
Fig. 19
Front Cooking Zone
USE THE CORRECT SIZE COOKWARE - The 4 Cooking Zones available on the Induction Cooktop require a MINIMUM pan
size to be used at each location (Fig. 19). The inner ring of each Cooking Zone is your guide to the correct MINIMUM pan
size. The pan bottom must FULLY cover the inner ring for proper cooking to occur.
The thicker outer ring at each Cooking Zone is helpful to determine the pan MAXIMUM size. After centering the cookware of
the cooktop, make sure the cookware does not extend more than 1/2” beyond the thicker line on the Cooking Zone (See
example in Fig. 19). The pan must make FULL contact on the glass surface without the bottom of the pan touching the metal
cooktop trims (Shown in Fig. 19).
NOTE: If a pan made of the correct material is centered properly on any of the active Cooking Zones but is TOO SMALL, the
affected Cooking Zone LED will display an F code and the pan will not heat.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the Cooktop
Induction Cookware Recommendations
Use Quality Cookware in Good
Condition
INCORRECT
CORRECT
The cookware used with the Induction
Cooktop should have flat bottoms that
make good contact with the entire surface
of the Cooking Zone. Check for flatness by
rotating a ruler across the bottom of the
cookware (See Fig. 21). Be sure to follow
all the recommendations for using
cookware as shown in Fig. 20.
Also remember to:
• Use cookware made with the correct
material type for Induction Cooking (See
Fig. 18).
• Use quality cookware with heavier
bottoms for better heat distribution
allowing for more even cooking results.
• The pan size should match the amount
of food being prepared.
• Cookware not centered on Cook-
ing Zone surface.
• Cookware centered correctly on
Cooking Zone surface.
• Do not let pans boil dry. This may cause
permanentdamageintheformofbreakage,
fusion, or marring that can affect the
ceramic cooktop. (This type of damage is
not covered by your warranty).
• Do not use dirty pans with grease
buildup. Always use pans that are easy
to clean after cooking.
• Curved or warped pan bottoms or
sides.
• Flat pan bottom & straight sides.
• Pan does not meet the minimum
size required for the Cooking Zone
used (See Fig. 19).
• Pan size meets or exceeds the
recommended minimum size for
the Cooking Zone (See Fig. 19).
• Pan bottom rests on cooktop trim
or does not rest completely on the
cooktop surface.
• Pan rests completely on the
Cooktop surface.
Fig. 21
The Cooking Zones may
appear to be cool while turned ON and after
they have been turned OFF. The glass
surface may be HOT from residual heat
transfered from the cookware and burns
may occur.
• Heavy handle tilts pan.
• Pan is properly balanced.
Fig. 20
PLEASE NOTE - ANY one of the incorrect conditions listed above in
Fig. 20 may be detected by the sensors located below the ceramic
cooktop surface. If the cookware does not meet any of these
conditions, one or more of the Cooking Zones will not heat indicated
by an F in the affected Cooking Zone display. Correct the problems
before attempting to activate the cooktop.
DO NOT TOUCH HOT
COOKWARE or PANS directly with
hands. Always use oven mitts or pot
holders to protect hands from burns.
DO NOT SLIDE Cookware
across the cooktop surface. Doing so
may permanently damage the appearance
of the ceramic cooktop.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the Cooktop
Prior to using your cooktop for the first time, apply the recommended cooktop cleaning creme (on the web visit
www.sears.com for replacement cleaner, item number 40079) to the ceramic surface. Buff with a non-abrasive cloth or pad.
This will make cleaning easier when soiled from cooking. The special cooktop cleaning cream leaves a protective finish on
the glass to help prevent scratches and abrasions.
Setting Cooktop Controls
Using the Touch Control
The recommended way to use the touch pads on the cooktop is shown in Fig. 22.
Be sure that your finger is placed in the center of the touch pad as shown. If the
finger is not placed on the center of a pad, the cooktop may not respond to the
selection made.
Lightly contact the pad with the flat part of your entire fingertip. Do not just use the
narrowendofyourfingertip.
Fig. 22
Operating the Cooking Zones
The Induction cooktop has four Cooking Zones designed for cookware of various sizes. Be sure to place cookware that
meets the minimum and maximum pan size requirements (Fig. 19) for the Cooking Zone desired and is best for the amount
of food being prepared. Place the cookware with the prepared food on the Cooking Zone BEFORE setting any of the
Cooktopcontrols.
To Turn ON one or more of the Cooking Zones:
1. Place the prepared food using the correct type and size cookware on the desired Cooking Zone. Be sure to center the
cookware on Cooking Zone completely covering the minimum ring marked on the Zone surface. PLEASE NOTE: If the
cookware requirements for the Cooking Zone (See Fig. 20) are not met the sensors will detect a problem and display
the letter F in the affected Cooking Zone LED. Any problems must be corrected before proceeding.
2. Touch and hold the
key pad for 2 seconds (or until a beep sounds). The Power Indicator light located above the
key pad will turn ON. NOTE: If no other key pad is touched within 10 seconds the request to Power ON the
cooktop will clear.
3. To start one or more of the four Cooking Zones lightly touch the
key pad for the Cooking Zones needed. A beep
will sound and the chosen Cooking Zone power level digital display will show 0 indicating no power level for the Zone
has been set yet. NOTE: If no other key pad is touched within 5 seconds the request to Power ON the Cooktop Zone
will clear.
4. Set the desired power level for the Cooking Zone by touching either the
touched the Cooking Zone will start at a “Power Boost” maximum power level (the Cooking Zone LED will display P
and the control will beep once). If the key pad is touched once the Cooking Zone will start at 1.0 (the Cooking
Zone LED will display 1 and the control will beep once).
or
key pad. If the
key pad is
NOTE: Touch once, or repeatedly touch the
or
key pads to adjust or scroll through power levels at any
or key
time during the cooking process (To scroll through the power levels quickly touch and hold the
pads until the power level desired is reached). Once the Cooking Zone power level has been set the food will begin to
heat at that level until the power level is manually changed. For more information about the available Cooktop Zones
power levels available see “Power Level Settings” section on page 6.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Cooktop Controls
To Turn ON one or more of the Cooking Zones (cont’d)
IMPORTANT OPERATING NOTES:
• Fluids spilled or objects lying on the controls area of the cooktop may cause the cooktop to turn OFF while cooking.
Clean the spills or remove the objects from the cooktop.
• Be sure the cooktop vent holes are NOT blocked. If the vent holes are blocked the cooktop internal sensor may shut
OFF of the cooktop to avoid over heating the appliance.
• If the cookware or pan is moved from the center of any active Cooking Zone for any reason, a sensor will detect the
situation and the cookware will no longer heat. The affected Cooking Zone LED will flash between F and the last
power level set for the Cooking Zone. The Cooking Zone will remember the power level setting for up to 3 minutes
before the Cooking Zone will automatically shut OFF. If the cookware is brought back properly centered o
To Turn OFF the Cooking Zones:
1. Once cooking is complete, touch the
key pad to turn the Cooking Zone OFF.
key pad will turn OFF. A beep will
2. The corresponding Cooking Zone ON/OFF Indicator light located above the
sound and the chosen Cooking Zone power level LED will display 0. If no other key pads are touched the Cooking Zone
will shut OFF automatically in 5 seconds. If no other Cooking Zones are active and no other key pads are touched the
entire cooktop will shut OFF automatically in 5 more seconds.
3. When any Cooking Zone is OFF, the corresponding Cooking Zone LED may display H if the Cooking Zone temperature
is too HOT. The LED will continue to display H , and even if the Cooktop is switched OFF the LED will continue to
display H as long as the cooktop remains HOT.
The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The
glass surface may be HOT from residual heat transfered from the cookware and burns may occur.
Preheat Recommendations
When preheating a pan on the cooktop always watch carefully. Whenever using the cooktop the user should always pay
attention to any items cooking and remain attentive until the cooking process is complete.
Keep in mind that induction may decrease the amount of time required to preheat a cooking utensil.
Keep Warm Feature
The Warm feature may be used with any of the Cooking Zones.
To Turn the Keep Warm Feature ON:
1. To select the Keep Warm feature for any Cooking Zone touch the
key pad for the corresponding Cooking Zone.
2. Touch the
key pad located in the main control area. The Cooking Zone will display L (LOW) indicating that the
Cooking Zone is properly set to Keep Warm. If no other key pads are pressed for a period of 5 seconds the control will
activate the desired Cooking Zone at the Keep Warm setting (See Fig. 16).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Cooktop Controls
Minute Timer
The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep track
of time from 1 to 99 minutes. The LED display located to the left of the Timer UP/DOWN arrow key pads will begin to count
down minutes once set.
To Set the Minute Timer:
1. Touch the
listed under the word “TIMER”. Touching and releasing the
or the
key pads will increase
or decrease the Minute Timer setting by 1 minute with each key press (up to 99 minutes).
2. Once the Timer LED displays the desired amount of time, release the UP or DOWN Arrow key pads. The Minute Timer
LED will flash the time with a small dot to the right. Once the LED quits flashing and the dot disappears the
MinuteTimer will begin the countdown with remaining minutes. Once the Minute Timer reaches 00 a long beep will
sound indicating that the time is up.
To Cancel the Minute Timer:
1. Touch the
and
key pads at the same time or touch and hold either the
or
key pad and
scroll to 00.
2. If cancelling the Minute Timer using the scrolling method, once the Main Control LED reaches 00, release the Arrow
key pad.
3. The LED will flash momentarily and then quit flashing. The set time will disappear from the LED indicating that the
MinuteTimer is no longer active.
Locking the Controls
The Induction Cooktop may be locked in order to prevent the cooktop from accidentally being turned ON.
To Turn ON the Controls Lock Feature:
1. The Cooktop Lock will not activate until the cooktop is OFF. If the cooktop power is not OFF, touch and hold the
key pad until a beep sounds (about 1 second). The Power Indicator light located above the
OFF.
key pad will turn
2. Touch the
key pad until a beep sounds (about 5 seconds). The Lock Indicator Light above the
key pad will
turn ON indicating the cooktop is locked. This will keep any Cooking Zone or Cooktop functions from being accidentally
turned ON (See Fig. 5)
To Turn OFF the Controls Lock Feature:
1. Touch the
key pad until a beep sounds (about 5 seconds). The Lock Indicator Light above the
key pad will
turn OFF indicating the cooktop is unlocked. The Cooking Zones or any of the other Cooktop functions may now be
used (See Fig. 4).
2. If the cooktop is needed you must touch and hold the
key pad until a beep sounds (about 1 second). The Power
Indicator Light located above the
Zones.
key pad will turn ON. (See Fig. 7). You may now activate any of the Cooking
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Cooktop Controls
Power Sharing
Your cooktop is equipped with four induction
elements within two heating sections. The
right-handandleft-handCookingZonesare
poweredbytwoindependentinduction
inverters - one inverter for each of the two
heating sections. Two Cooking Zones in a
heating section share the power of one
inverter. This is called Power Sharing.
N
For example, if pans are cooking food items
on both right-hand Cooking Zones, the last
Power Level set will be maintained, while the
first pan may experience a slight reduction in
thepowerlevelsetting.
POWER SHARING TIPS: Remember to set
the power level for the food item you wish to
maintain last. Or, you may choose to
maintain a constant power level for 2 food
items by placing the pans on one of the
Cooking Zones of the left-hand heating
section and the other pan on one of the
Cooking Zones of the right-hand heating
section (See Fig. 23).
Right-hand
Cooking Zones section
Left-hand
Cooking Zones section
Fig. 23
Operational Noises
The electronic processes involved with Induction Cooking create some unusual background noises. These noises are
normal and part of the Induction Cooking process.
Please note that these noises are more noticeable while cooking at the Power BOOST level. Very loud noises are not part
ofnormalInductionCooking.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
General Care & Cleaning
Ceramic Glass Cooktop Cleaning & Maintenance
Consistent and proper cleaning is essential to maintaining your Ceramic glass cooktop
Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme (visit www.sears.com for
replacement cleaner, item number 40079) to the ceramic surface. Clean and buff with a paper towel or a 3M Scotch-Brite® Blue
Multi-Purpose No Scratch Scrub Sponge. This will make cleaning easier when soiled from cooking. The special cooktop cleaning
cream leaves a protective finish on the glass to help prevent scratches and abrasions.
Sliding cookware on the cooktop can cause metal markings on the cooktop surface (See Fig. 24). These marks should be
removed immediately after the cooktop has cooled using the cooktop
cleaning cream. Metal marks can become permanent if not removed prior to
futureuse.
Cookware with rough or dirty bottoms can mark or scratch the cooktop surface.
Do not slide anything metal or glass across the cooktop. Do not use
cookware with dirt or dirt build up on bottom; replace with clean cookware
before using. Do not use your cooktop as a cutting board or work surface in
the kitchen. Do not cook foods directly on the cooktop surface without a pan.
Do not drop heavy or hard objects on the ceramic glass cooktop, they may
cause it to crack.
Fig. 24
Cleaning Recommendations for Ceramic Glass Cooktop
Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL.
DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can
chemically damage the ceramic-glass surface.
For light to moderate soil:
Apply a few drops of CookTop® Cleaning Creme directly to the cooktop. Use a paper towel or a 3M Scotch-Brite® Blue
Multi-Purpose No Scratch Scrub Sponge to clean the entire cooktop surface. Make sure the cooktop is cleaned thoroughly,
leaving no residue. Do not use the sponge you use to clean the cooktop for any other purpose.
For heavy, burned on soil:
First, clean the surface as described above. Then, if soils remain, carefully scrape soils with a metal razor blade scraper,
holding scraper at a 30 degree angle to the surface. Remove loosened soils with cooktop cleaning cream and buff surface
clean.
Damage to the ceramic glass cooktop may occur if you use any scrub
pad other than a 3M Scotch-Brite® Blue Multi-Purpose No Scratch Scrub Sponge.
Plastic or foods with a high sugar content:
These types of soils need be removed immediately if spilled or melted onto the ceramic
cooktop surface. Permanent damage (such as pitting of the cooktop surface) may occur
if not removed immediately. After turning the surface elements OFF, use a razor blade
scraper or a metal spatula with a mitt and scrape the soil from the hot surface (See Fig.
25). Allow the cooktop to cool, and use the same method for heavy or burned on soils.
Fig. 25
Do not use the following on the ceramic cooktop (See Fig. 26):
• Do not use abrasive cleaners and scouring pads, such as metal and some
nylon pads. They may scratch the cooktop, making it more difficult to clean.
• Do not use harsh cleaners, such as chlorine bleach, ammonia or oven
cleaners, as they may etch or discolor the cooktop.
• Do not use dirty sponges, cloths or paper towels, as they can leave soil or
lint on the cooktop which can burn and cause discoloration.
Fig. 26
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Call
•
Solutions to Common Problems
Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that
are not the result of defective workmanship or materials in this appliance.
POSSIBLE CAUSE/SOLUTION
OCCURRENCE
Entire cooktop does not operate
Cooktop controls are locked. Set the cooktop controls to unlock the Cooktop
(See p. 11 for further instructions).
Make sure household electrical circuit breaker is ON and that power is properly
supplied to the Cooktop.
Service wiring is not complete. Call 1-800-4-MY-HOME® for installation
assistance (See back cover).
Electrical power outage. Check house lights to be sure. Call your local electric
companyforservice.
Cooktop turns OFF while cooking
The automatic shut-off feature will turn all of the Cooking Zones and the entire
Cooktop OFF after any Cooking Zone has been in continuous use for 18 hours.
Cooktop internal heat sensor has detected high temperatures inside the
appliance. Be sure the appliance vent holes are not blocked. (Refer to the
Installation Instructions supplied with the cooktop for more detailed
cooktop installation information).
Fluids spilled or object lying on controls area of cooktop. Clean spills or remove
object.Repowercooktop.
Cooking Zone does not heat food
No cookware was placed on the Cooking Zone or cookware material type
incorrect for Induction Cooking (See Figs. 18 & 20).
Cookware bottom not large enough for Cooking Zone (See Fig. 19).
Cookware is warped or in poor condition (See Figs. 20 & 21).
Cookware is not centered on Cooking Zone (See Fig. 20).
Cookware resting on cooktop trim or does not rest completely on cooktop surface
(See Figs. 19 & 20).
No power to the appliance. Check steps under "Entire cooktop does not
operate" in this checklist.
Incorrect Cooking Zone control setting. Make sure the correct control is ON for
the Cooking Zone being used.
Incorrect power level setting. Adjust the power level setting higher or lower and
refer to recipe for guidance and adjust accordingly.
Cooking Zone heats food too hot or
not hot enough
Lightweight or warped pans were used. Be sure to use good quality cookware
(Refer to Figs. 20 & 21).
Food does not heat evenly
Use only flat bottom, evenly balanced medium or heavyweight cookware. Heavy
and medium weight pans heat evenly. Because lightweight pans heat unevenly,
foods may burn more easily (See p. 8 for further information).
Adjust Cooking Zone power level setting until the proper amount of heat is
obtained.
Many factors affect cooking results. Adjust the recipe's recommended power
levels or cooking times.
Poorcookingresults
Cookware is too lightweight or warped. Use heavier quality cookware so foods
being prepared may cook more evenly.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Call
•
Solutions to Common Problems (cont’d)
POSSIBLE CAUSE/SOLUTION
OCCURRENCE
Cooktop Zone Control displays E
and 2 digit LED Main Control
displays 00, 03, 04, 05, 06 or 07
Induction Cooktop main control has detected a fault or error condition. Try turning
electrical power supply OFF and back ON to cooktop in order to reset Cooktop
main controls. If fault recurs, record fault number and turn power supply to
Cooktop OFF. Call 1-800-4-MY-HOME® for assistance (See back cover).
Induction Cooktop pan detection sensors do not see the correct cookware. Test
with a magnet to be sure cookware is made with Induction compatible material.
CookingZoneLEDcontinuously
flashes F
Cookware has been removed from the Cooking Zone without turning the Cooking
Zone OFF. Place cookware back on to the Cooking Zone or if finished cooking
turn of the affected Cooking Zone.
Cookware is not centered over the Cooking Zone properly. Refer to Fig. 20 for
correct cookware placement.
Metal marks on ceramic cooktop
surface
Sliding or scraping of metal utensils on cooktop surface. DO NOT slide cookware
or cooking utensils across the cooktop surface. Use the recommended ceramic
glass cooktop cleaning creme to remove the marks. See "Cooktop Cleaning &
Maintenance" in the General Care & Cleaning section (Refer to p. 13).
Scratches or abrasions on ceramic
cooktopsurface
Coarse particles such as salt or sand between cooktop and cookware or cooking
utensils can cause scratches. Be sure cooktop surface and bottoms of utensils
are clean before placing on cooktop. Small scratches do not affect cooking and
will become less visible with time.
Cleaning materials not recommended for ceramic-glass cooktop have been used.
See "Cooktop Cleaning & Maintenance" in the General Care & Cleaning
section.
Cookware with rough bottoms were used. Use smooth, flat-bottomed cookware
ONLY (See Figs. 20 & 21).
Boil overs are cooked onto cooktop surface. Use a razor blade scraper to remove
soil. See "Cooktop Cleaning & Maintenance" in the General Care & Cleaning
section (Refer to p. 13).
Brown streaks or specks on ceramic
cooktopsurface
Mineral deposits from food and/or water. Remove using a ceramic-glass cooktop
cleaning creme. Remember to use cookware with clean, dry bottoms. For more
information See "Cooktop Cleaning and Maintenance" in the General Care &
Cleaning section.
Areas of discoloration with metallic
sheen on ceramic cooktop surface
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PROTECTION AGREEMENTS
ACUERDOSDEPROTECCIÓN
En los EE.UU.
In the U.S.A.
Master Protection Agreements
Acuerdos maestros de protección
Congratulations on making a smart purchase. Your new
Kenmore® product is designed and manufactured for years
of dependable operation. But like all products, it may require
preventive maintenance or repair from time to time. That’s
when having a Master Protection Agreement can save you
moneyandaggravation.
Lo felicitamos por haber hecho una compra inteligente. Su
nuevo producto Kenmore® fue diseñado y fabricado para
ofrecer muchos años de servicio confiable. Sin embargo,
como todo producto, el mismo podría requerir mantenimiento
preventivo o reparaciones ocasionales. Es por eso que el
tener un Acuerdo maestro de protección podría ahorrarle
dinero y molestias.
Purchase a Master Protection Agreement now and protect
yourself from unexpected hassle and expense.
Adquiera ya un Acuerdo maestro de protección y protéjase de
gastos y frustraciones inesperados.
The Master Protection Agreement also helps extend the life
of your new product. Here’s what’s included in the
Agreement:
El Acuerdo maestro de protección también ayuda a extender
la vida de su producto nuevo. El Acuerdo incluye lo siguiente:
Servicio profesional por nuestros 12.000 profesionales
especialistas en reparación.
9
Expert service by our 12,000 professional repair
specialists
9
Servicio ilimitado sin cargos adicionales por piezas
y servicio en todas las reparaciones cubiertas.
9
Unlimited service and no charge for parts and labor on
all covered repairs
9
9 Garantía de “no-limón” – reemplaza su producto
cubierto si ocurren cuatro o más desperfectos en los
primeros doce meses.
“No-lemon”guarantee–replacement
of your covered product if four or more product failures
occur within twelve months
9
Reemplazo del producto si el mismo no puede ser
reparado.
9
Product replacement if your covered product can’t be
fixed
AnnualPreventiveMaintenanceCheckatyourrequest
– no extra charge
Fast help by phone – phone support from a Sears
technician on products requiring in-home repair, plus
convenientrepairscheduling
9
9
9
Verificación de mantenimiento preventivo anual a
su petición y sin cargos adicionales.
9
Pronta ayuda por teléfono – apoyo por teléfono por un
9
técnico de Sears en los productos que requieran
reparación en casa, además de la conveniencia de hacer
una cita para la reparación.
Power surge protection against electrical damage due
to power fluctuations
Rental reimbursement if repair of your covered product
takes longer than promised
9
9
Protección contra picos de energía o daños
eléctricos causados por fluctuaciones de la corriente
eléctrica.
9
Reembolso del alquiler si la reparación de su producto
cubierto toma más del tiempo prometido.
9
Once you purchase the Agreement, a simple phone call is
all that it takes for you to schedule service. You can call
anytime day or night, or schedule a service appointment
online.
Una vez que adquiera este Acuerdo, una simple llamada
telefónica es todo lo que necesita para hacer una cita de
servicio. Usted puede llamar a cualquier hora del día o de la
noche para programar una cita de servicio por Internet.
Sears has over 12,000 professional repair specialists, who
have access to over 4.5 million quality parts and
accessories. That’s the kind of professionalism you can
count on to help prolong the life of your new purchase for
years to come. Purchase your Master Protection Agreement
today!
Sears cuenta con más de 12.000 profesionales especialistas
de reparación con acceso a más de 4,5 millones de piezas y
accesorios de calidad. Esa es la clase de profesionalismo
con la que puede contar para extender la vida útil de su nueva
adquisición por muchos años. ¡Adquiera su Acuerdo maestro
de protección hoy!
Algunas limitaciones y exclusiones podrían aplicarse.
Para precios e información adicional, llame al
1-800-827-6655.
Some limitations and exclusions apply.
For prices and additional information call
1-800-827-6655.
Servicio de instalación Sears
Para una instalación profesional de Sears en
electrodomésticos, abridores de puertas de garaje,
calentadores de agua y otros artículos mayores del hogar,
llameal1-800-4-MY-HOME®
SearsInstallationService
For Sears professional installation of home
appliances,garagedooropeners,waterheaters,
and other major home items, in the U.S.A. call
®
1-800-4-MY-HOME
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|