I
N
S
T
R
U
C
T
I
O
N
M
A
N
U
A
L
C
E
3
2
L
D
1
7
E
-
B
L
C
D
T
e
l
e
v
i
s
i
o
n
P
r
o
b
l
e
m
s
w
i
t
h
s
e
t
-
u
p
?
P
l
e
a
s
e
r
e
a
d
t
h
i
s
I
n
s
t
r
u
c
t
i
o
n
b
o
o
k
b
e
f
o
r
e
u
s
i
n
g
y
o
u
r
t
e
l
e
v
i
s
i
o
n
.
C
a
l
l
0
8
4
4
3
3
5
2
2
3
0
W
e
w
i
s
h
y
o
u
m
a
n
y
h
o
u
r
s
o
f
p
l
e
a
s
u
r
e
f
r
o
m
y
o
u
r
n
e
w
t
e
l
e
v
i
s
i
o
n
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Features ................................................................. 2 Managing Stations: Sorting Channel List ............. 17
Introduction............................................................. 2 On-Screen Information......................................... 17
Preparation............................................................. 2 Media Playback Using Media Browser................. 18
Safety Precautions ................................................. 2
Viewing Videos via USB .................................. 18
Viewing Photos via USB................................... 18
Media Browser Settings.................................... 19
Changing Image Size: Picture Formats................ 19
Waste Disposal................................................... 3
FOR EU USERS................................................. 3
Licence Notification ............................................ 4
TRADEMARK ACKNOWLEDGMENT................ 4
Connection to a Television Distribution System
(Cable TV etc.) from Tuner ................................. 4
Package Contents.................................................. 4
Configuring Picture Settings................................. 20
Operating Picture Settings Menu Items............ 21
Picture Settings Menu Items............................. 21
PC Picture Settings........................................... 21
Environmental Information ..................................... 5 Configuring Sound Settings.................................. 21
Detachable Stand Installation Method.................... 6
Detachable Stand Uninstallation Method ............... 6
Remote Control Buttons......................................... 7
LCD TV and Operating Buttons.............................. 8
Viewing the Back side Connections ....................... 8
Viewing the Connections - Side Connectors .......... 9
Power Connection.................................................. 9
Operating Sound Settings Menu Items............. 21
Sound Settings Menu Items.............................. 22
Configuring Your TV’s Settings............................. 22
Operating Settings Menu Items........................ 22
Settings Menu Items......................................... 22
Using a Conditional Access Module..................... 22
Viewing Conditional Access Menu (*)............... 23
Configuring Language Preferences...................... 23
Parental Control.................................................... 24
Aerial Connection ............................................... 9
Using the Cable Holder ........................................ 10
Using Digital Multimedia Connectors.................... 10
Parental Settings Menu Operation (*)............... 24
Timers................................................................... 24
USB Memory Connection................................. 10
Connecting the LCD TV to a PC........................... 10
Using Side AV Connectors ................................... 10
Connecting to a DVD Player..................................11
Using Other Connectors........................................11
Remote Control Handset.......................................11
Setting Sleep Timer .......................................... 24
Setting Programme Timers............................... 24
Configuring Date/Time Settings............................ 25
Configuring Source Settings................................. 25
Configuring Other Settings................................... 25
Operation.......................................................... 25
Other Features ..................................................... 26
Teletext................................................................. 27
Tips....................................................................... 27
Appendix A: PC Input Typical Display Modes....... 28
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types).............................................. 28
Appendix C: Supported DVI Resolutions.............. 29
Appendix D: Supported File Formats for USB
Mode..................................................................... 29
Appendix E: Software Upgrade............................ 30
Specifications ....................................................... 31
Digital Reception (DVB-T).................................... 31
Important Instruction............................................. 32
Inserting Batteries..............................................11
Switching On/Off................................................... 12
To Switch the TV Off......................................... 12
Digital Teletext (** for UK only) ......................... 12
Analogue Teletext ............................................. 12
Input Selection...................................................... 12
Operation with the Buttons on the TV............... 12
Operation with the Remote Control .................. 13
First Time Installation............................................ 14
Auto Tuning .......................................................... 15
Auto Channel Scan Menu Operation................ 15
Manual Tuning ..................................................... 15
Digital Manual Search....................................... 15
Analogue Manual Search ................................. 15
Analog Fine Tune.............................................. 16
Clear Service List (*)......................................... 16
Managing Stations: Channel List.......................... 16
Operating the Channel List............................... 16
Moving a Channel............................................. 16
Deleting a Channel........................................... 16
Renaming a Channel........................................ 16
Locking a Channel............................................ 17
Managing Stations: Favourites............................. 17
Button Functions............................................... 17
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 1 -
Features
• Remote controlled colour LCD TV.
Introduction
Please read the corresponding instructions of this
handbook prior to the first usage of the device, even
when the usage of electronic devices is familiar
to you. Notice especially the chapter SAFETY
PRECAUTIONS. Carefully keep the handbook as
future reference. When selling the device or giving it
away, absolutely give these direction for use.
• Fully integrated Terrestrial digital TV (DVB-T - MPEG2)
(DVB-T- MPEG4).
• HDMI connectors for digital video and audio. This
connection is also designed to accept high definition
signals.
• USB input.
Thank you for choosing this product. This manual will
guide you for the proper operation of your TV.
Before operating the TV, please read this
manual thoroughly. Please do keep this
manual in a safe place for future references.
• 1000 programmes (analogue+digital).
• OSD menu system.
• Integrated tuner DVB-T HD, MPEG 2 / MPEG 4
compatible.
This device is intended to receive and display TV
programs. The different connection options make
an additional expansion of the reception and display
• Scart socket for external devices (such as video,
video games, audio set, etc.).
• Stereo sound system. (German+Nicam)
• Teletext, fastext, TOP text.
• Headphone connection.
sources possible (receiver, DVD player, DVD
recorder,
VCR, PC etc.). This device is only suitable for the
operation in dry interiors. This appliance is intended
solely for private domestic use and may not be used
for industrial and commercial purposes. We exclude
liability in principle, if the device is not used as
intended, or unauthorized modifications have been
made. To operate your LCD TV in extreme ambient
conditions may cause the damage of the device.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer / Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
• Auto power down.
Preparation
• PLL (Frequency Search).
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top of
the set. Use this device in moderate climates.
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista.
• Game Mode
1
0
c
m
Safety Precautions
Read the following recommended safety
precautions carefully for your safety.
Power Source
The TV set should be operated only from a 220-240
VAC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 2 -
Power Cord
Servicing
Do not place the set, a piece of furniture, etc. on the Please refer all servicing to qualified
power cord (mains lead) or pinch the cord. Handle the personnel. Do not remove the cover
power cord by the plug. Do not unplug the appliance by yourself as this may result in an electric
pulling from the power cord and never touch the power shock.
cord with wet hands as this could cause a short circuit or
electric shock. Never make a knot in the cord or tie it with
other cords. The power cords should be placed in such a
Waste Disposal
• Instructions for waste disposal:
way that they are not likely to be stepped on.Adamaged • Packaging and packaging aids are recyclable and
power cord can cause fire or give you an electric shock.
When it is damaged and needs to be replaced, it should
be done by qualified personnel.
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
and do not place objects filled with
liquids, such as flower vases, on top.
Avoid from dripping or splashing.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
FOR EU USERS
The symbol mark and recycling
systems described below apply
to EU countries and do not apply
to countries in other areas of the
world.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
Cleaning
Your SANYO product is designed
and manufactured with high quality
materials and components which
can be recycled and/or reused.
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid
or aerosol cleaners. Use soft and dry
cloth.
The symbol mark means that electrical and electronic
equipment, batteries and accumulators, at their end-
of-life, should be disposed of separately from your
household waste.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.
Note:
If a chemical symbol is printed beneath the symbol
mark, this chemical symbol means that the battery
or accumulator contains a heavy metal at a certain
concentration. This will be indicated as follows: Hg:
mercury, Cd: cadmium, Pb: lead
Heat and Flames
The set should not be placed near to
open flames and sources of intense heat
such as an electric heater. Ensure that
no open flame sources, such as lighted
candles, are placed on top of the TV. Batteries should
not be exposed to excessive heat such as sunshine,
fire or the like.
In the European Union there are separate collection
systems for used electrical and electronic equipment,
batteries and accumulators.
Please, dispose of them correctly at your local
community waste collection/recycling centre.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Please, help us to conserve the environment we live in!
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
same specifications as the original one. Unauthorized
substitutions may result in fire, electrical shock or
other hazards.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 3 -
Installation
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
Device connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
fire hazard.
LCD Screen
The LCD panel is a very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
Warning! Do not leave your TV in standby or operating
mode when you leave your house.
Package Contents
SCREEN
EPG
LANG
FAV
SUBTTL
PIP
PRESETS
SLEEP
1
4
7
2
3
6
9
5
8
0
The Standby / On button doesn´t separate this
device completely from mains. Moreover the device
consumes power in the standby operation. In order to
separate the device completely from mains, the mains
plug has to be pulled from the mains socket. Because
of that the device should be set up in a way, that an
unobstructed access to mains socket is guaranteed,
so that in case of emergency the mains plug can be
pulled immediately. To exclude the danger of fire, the
power cord should principally be separated from the
mains socket prior to a longer period of non-usage,
i.e. during vacations.
LCD TV
-
V
V
+
P
+
P
-
SOURCE
OK
Batteries: 2 X AAA
Instruction Book
RETURN
INFO/?
MENU
Remote
Control
Electrical device not in the hands of children
Never let children use electrical device unsupervised.
Children can´t always recognize properly the
possible dangers. Batteries / accumulators can be
life threatening when swallowed. Store batteries
unreachable for small children. In case of swallowing
a battery medical aid has to be sought immediately.
Also keep the packaging foils away from children.
There is danger of suffocation.
Cable Holer
1 X Video & Audio
Connection Cable
Licence Notification
Manufactured under license from Dolby
Laboratories.
Note: You should check the accessories after
purchasing. Make sure that each accessory is
included.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 4 -
Environmental Information
• This television is designed to consume less energy to save environment.
You not only help to save the environment but also you can save money by reducing electricity bills thanks to the
energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps:
• You can use Power Save Mode setting, located in the Setting menu. If you set Power Save Mode as On, the
TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note
that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
• When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce
energy consumption.
• Disconnect power when going away for longer time.
• Note that annually,using the TV set in Power Save Mode has more power efficiency than disconnecting the
TV from the mains plug instead of keeping stand-by mode. Therefore it is highly recommended to activate
Power Save Mode setting to reduce your annual power consumption.And also it is recommended to disconnect
the TV from the mains plug to save energy more when you do not use.
• Please helps us to save environment by following these steps.
Repair Information
Please refer all servicing to qualified personnel. Only qualified personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 5 -
Detachable Stand Installation Method
1. Stand is placed on a flat surface.
2. The product is hold over the stand so that it concides with the stand mounting point and
then it is left to be mounted with its own weight.
Detachable Stand Uninstallation Method
1. TV is laid on a flat table so that backcover will be on topside.
2. Clamps on the stand are pushed.
3. Stand is pulled back.
4. Stand is detached.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 6 -
Remote Control Buttons
1. Mono/Stereo - Dual I-II / Currrent Language (*)
(in DVB channels)
2
7
2. Image size / Zooms videos (in Media Browser
2
6
video mode)
1
2
3
4
5
6
2
2
2
2
2
5
4
3
2
1
LANG
FAV
SUBTTL
SCREEN
EPG
PIP
3. Electronic programme guide (in DTV mode)
4. Favourite Mode Selection (in DTV mode)
5. Red button / Stop (in Media Browser)
PRESETS
SLEEP
6. Green button / List Schedule (in EPG) / Tag /
Untag All (in favourite list) / Play-Slideshow (in
Media Browser)
1 2 3
4 5 6
7 8 9
0
7. Numeric buttons
7
8
8. Teletext / Mix (in TXT mode)
9. Volume Down
10. Programme Down / Page up (in DTV mode)
11. Mute
2
0
12. Navigation buttons
13. Exit / Return / Index page (in TXT mode)
14. Menu
9
-
V
1
9
8
V
+
1
0
-
P
P
1
+
15. Info / Reveal (in TXT mode)
16. Okay (Confirm) / Hold (in TXT mode) / Edit
SOURCE
1
1
1
7
Channel List
17. AV / Source Selection
1
6
18. Programme Up / Page down (in DTV mode)
19. Volume Up
OK
1
2
20. Previous programme
21. Yellow button / Pause (in Media Browser) /
RETURN
INFO/?
1
3
MENU
1
5
Timeline Schedule (in EPG)
22. Blue button / Edit Channel List / Filter (İn
Favourite List&EPG) / Loop-Shuffle (in Media
Browser)
1
4
23. Picture mode selecion / Changes picture mode
(in Media Browser video mode)
You can use numeric buttons on the remote control
to input letters when necessary. Pressing the numeric
buttons ‘0...9’ inputs letters assigned to that button.
Letters are present one by one as the button is
pressed. Table below shows the assigned letters:
24. Sleep Timer
25. No function
26. Subtitle on-off (in DVB channels)
27. Standby / On
1/ABC
2/DEF
3/GHI
4/JKL
5/MNO
6/PQR
7/STU
8/VWX
9/YZ
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 7 -
LCD TV and Operating Buttons
FRONT and REAR VIEW
Control buttons VIEW
Control Buttons
1. Standby/On button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
MENU
TV/AV
P
Note: Press “
” and
MENU
TV/AV
P
buttons at the same time to view
main menu.
Viewing the Back side Connections
1. SCART 2 inputs or outputs for external devices.
2. SCART 1 input or output for external devices. Connect the SCART cable between SCART socket on
TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV
mode.
Note: To connect external device,please use to supplied scart connection cable .
3. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.
4. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output
of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 8 -
outputs of your device to enable component audio.
5. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input
6. RF Input connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
7. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC
8. HDMI 1: HDMI Input
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of
displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
9. HDMI 2: HDMI Input
Viewing the Connections - Side Connectors
1. CI Slot is used for inserting a CI card. A CI card allows you to view all the
channels that you subscribe to. For more information, see “Conditional Access”
section.
2. Side USBs
3. Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones .
4. Side audio-video connection input is used for connecting video and audio
signals of external devices. To make a video connection, you must use the
supplied AV connection cable for enabling connection. First, plug singular jack of
the cable to the TV’s Side AV socket. Afterwards, insert your video cable’s (not
supplied) connector into the YELLOW input (located on the plural side) of the
supplied AV connection cable. Colours of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side
AV connection cable. Afterwards, insert your device’s audio cable’s connectors
into the RED and WHITE jack of the supplied side AV connection cable. Colours
of the connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE)
to enable sound connection when connecting a device to your TV by using PC or COMPONENT
VIDEO input.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 9 -
Using the Cable Holder
Connecting the LCD TV to a PC
For displaying your computer’s screen image on your
LCD TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LCD TV. When the connection
is made, switch to PC source. See “Input selection”
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts.
A
u
d
i
o
P
C
I
n
p
u
t
I
n
p
u
t
s
You can use the supplied cable holder as the
following:
• Place the cable holder into the cable holder hole
located on the rear side of the TV as illustrated
above.
P
C
a
u
d
i
o
c
a
b
l
e
P
C
R
G
B
c
a
b
l
e
(
n
o
t
s
u
p
p
l
i
e
d
)
(
n
o
t
s
u
p
p
l
i
e
d
)
t
o
A
U
D
I
O
I
N
P
U
T
S
t
o
P
C
i
n
p
u
t
o
n
t
h
e
T
V
• Place cables into the cable holder after all necessary
connections are made.
Using Digital Multimedia
Connectors
• You can connect USB devices to your TV by using
the USB inputs of the TV. This feature allows you
to display/play JPG, MP3 and video files stored in
a USB stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
Using Side AV Connectors
You can connect a range of optional equipment to your
LCD TV using side connectors of the TV.
• You may back up your files before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any file damage or data loss.
• For connecting a camcorder or camera , you should
use AV socket (side). To do this, you must use the
supplied video/audio connection cable. First, plug
single jack of the cable to the TV’s AV IN socket
(side). Afterwards, insert your camera cable’s (not
supplied) connectors into the plural part of the video/
audio connection cable. Colours of the connected
jacks should match. See illustration below.
• Do not pull out USB module while playing a file.
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may cause physical damage to the USB
player and especially the USB device itself.
SIDE VIEW
USB
USB MEMORY
• Afterwards, you should switch to SideAV source. See
the section Input selection in the following sections
for more information.
AV Connection
AV Cable
5Vdc
Cable (supplied)
(not supplied)
Max:500mA
USB Memory Connection
IMPORTANT: The TV should be switched off while
plugging or unplugging a USB device. Plug your
USB devices to the USB input of the TV. You can
connect a usb device to your TV by using the USB
input of the TV.
Camera
Headphone
• To listen the TV sound from headphones, you
should connect headphones to your TV by using the
HEADPHONE jack as illustrated above.
Note: It is possible certain types of hard disk drives
are not supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 10 -
Connecting to a DVD Player
Using Other Connectors
If you want to connect a DVD player to your LCD You can connect a range of optional equipment
TV, you can use connectors of the TV set. DVD to your LCD TV. Possible connections are shown
players may have different connectors. Please refer below. Note that cables shown in the illustration are
to your DVD player’s instruction book for additional not supplied.
information. Power off both the TV and the device
before making any connections.
• For connecting a to a device that has SPDIF support,
use an appropriate SPDIF cable to enable sound
Note: Cables shown in the illustration are not
connection.
supplied.
E
x
t
e
r
n
a
l
S
p
e
a
k
e
r
s
• If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
When the connection is made, switch to YPbPr
source. See, “Input selection” section.
A
d
e
v
i
c
e
t
h
s
a
t
s
u
p
p
o
r
t
S
P
D
I
F
s
i
g
n
a
l
.
• You may also connect through the SCART 1 or
SCART 2. Use a SCART cable as shown below.
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
Remote Control Handset
Inserting Batteries
H
D
M
I
• Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside.Observe the correct polarity (+/-) when
inserting batteries and replace the battery cover.
+
-
-
+
C
o
m
p
o
n
e
n
t
C
o
m
p
o
n
e
n
t
a
u
d
i
o
v
i
d
e
o
S
c
a
r
t
s
o
c
k
e
t
s
H
D
M
I
i
n
p
u
t
s
i
n
p
u
t
s
i
n
p
u
t
s
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries. Remote range is approximately 7m/23ft.
D
V
D
P
l
a
y
e
r
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 11 -
• With digital terrestrial broadcasting (DVB-T), in
addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
Switching On/Off
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the “ ” button again, the digital
teletext screen will be displayed.
Analogue Teletext
(
S
t
a
n
d
b
y
S
w
i
t
c
h
)
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
• Connect the power cord to the 220-240V AC, 50
Hz.
Input Selection
• Switch the “
will switch to standby mode. Then the standby LED
lights up.
” button to position “|” so the TV
Once you have connected external systems to
your TV, you can switch to different input sources.
Press “SOURCE” button on your remote control
consecutively for directly changing sources.
To switch on the TV from standby mode either:
• Press the “ ” button, P+ / P- or a numeric button
on the remote control.
• Press the -P/CH or P/CH+ touch button on the TV.
The TV will then switch on.
Note: If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Switch the “
” button to position 2 as illustrated,
You can operate your TV using both the remote control
and onset buttons.
so the TV will switch OFF.
• To power down the TV completely, unplug the
power cord from the mains socket.
Operation with the Buttons on the TV
Volume Setting
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
• Press “
” button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
Digital Teletext (** for UK only)
• Press the “ ” button.
• Press“P/CH+”buttontoselectthenextprogrammeor
“P/CH -” button to select the previous programme.
• The digital teletext information appears.
Viewing Main Menu
• Operate it with the coloured buttons, cursor buttons
• Press the “V+”/”V-” button at the same time to view
and OK button.
main menu. In the Main menu select sub-menu using
The operation method may differ depending on the
contents of the digital teletext.
“AV” button and set the sub-menu using “
” or
“
” buttons. To learn the usage of the menus,
Follow the instructions displayed on digital teletext
screen.
refer to the menu system sections.
AV Mode
• When Press “SELECT” button or similar message
appears on the screen, press the OK button.
• Press the “AV” button in the control panel on the TV
to switch between AV modes.
• When the “ ” button is pressed, the TV returns to
television broadcasting.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 12 -
OK (Options): Displays programme options including
“Select Channel” option.
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
INFO (Event Details): Displays the programmes in
detail.
Green button: Programme schedule will be listed
Volume Setting
Yellow button: Display EPG data in accordane with
timeline schedule
• Press “V+” button to increase the volume. Press “V-”
button to decrease the volume.Avolume level scale
(slider) will be displayed on the screen.
Blue button (Filter): Views filtering options.
Programme Selection (Previous or Next
Programme)
• Press “P -” button to select the previous
programme.
• Press “P +” button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the first digit programme will
be displayed. Press directly the programme number
to reselect single digit programmes.
Red button (Prev Time Slice): Displays the
programmes of previous time slice.
Green button (Next Time Slice): Displays the
programmes of the next time slice.
Yellow button (Prev Day): Displays the programmes
of previous day.
Viewing Electronic Programme
Guide (EPG)
You can view the electronic programme guide (EPG)
to view information about available programmes.To
view the EPG menu please press GUIDE button on
the remote control.
Blue button (Next day): Displays the programmes
of the next day.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK (Options): Displays programme options including
“Select Channel” option.
Text button (Filter): Views filtering options.
• Press “ ”/“
channels.
”
buttons to navigate through
INFO (Details): Displays the programmes in detail.
• Press “ ”/“ ” buttons to navigate through the
programme list.
• EPG menu displays available information on all
channels.
• Please note that event information is updated
automatically. If there are no event information
data available for channels, EPG will be displayed
with blanks.
Red button (Prev Day): Displays the programmes
of previous day.
Green button (Next day): Displays the programmes
of the next day.
Yellow button (Zoom): Expands programme
information.
Blue button (Filter): Views filtering options.
INFO (Details): Displays the programmes in detail.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 13 -
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
You can set Scan Encrypted as Yes if you want to
scan coded stations.Afterwards select the desired
Teletext Language.
OK (Options): Displays programme options including
“Select Channel” option.
• Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
Text (Search): Displays “Guide Search” menu.
SUBTTL: Press SUBTITLE button to view Select
Genre menu. Using this feature, you can search the
programme guide database in accordance with the
genre. Info available in the programme guide will
be searched and results matching your criteria will
be listed.
(Now) : Shows the current programme.
To select the “Yes” or “No” option, highlight the item by
using “ ” or “ ” buttons and press OK button.
First Time Installation
IMPORTANT: Ensure that the aerial is connected
before switching on the TV for the first time
installation.
Afterwards, the following OSD will be displayed on the
screen and the digital television will search for digital
terrestrial TV broadcasts
• When the TV is operated for the first time, installation
wizard will guide you through the process. First,
language selection screen will be displayed:
Note: You can press MENU button to cancel.
• Use “ ” or “ ” buttons to select your language
and press OK button to set selected language and
continue.
• After selecting the language, “Welcome!” screen will
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
End of the search process, “Choose Region” osd will
be displayed on the screen.Please select country and
region choice then press OK to continue.
• After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN,please select
“Yes” and than press “OK”.
• By pressing “ ” or “ ” button, select the country
you want to set and press “ ” button to highlight
Teletext Language option. Use “ ” or “ ” button
to select desired Teletext Language.
• Press “ ” button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 14 -
Manual Tuning
HINT: This feature can be used for direct broadcast
entry.
• Select Manual Channel Scan from the Installation
menu by using “ ”/“ ” and OK buttons. Manual
Scan options screen will be displayed.
• Select the desired Search Type using “ ” or “
” button. Manual search options will change
accordingly. Use “ ”/“ ” button to highlight an item
and then press “ ” or “ ” button to set an option.
You can press MENU button to cancel.
• Press OK button to quit channel list and watch TV.
Digital Manual Search
Auto Tuning
HINT:Auto tuning feature will help you to retune the TV
set in order to store new services or stations.
Press MENU button on the remote control and
select Installation by using “ ” or “ ” button. Press
OK button and the following menu screen will be
displayed.
In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.
Select Automatic Channel Scan by using “ ”/“
”
button and press OK button. Automatic Channel Scan
options will be displayed. You can select DigitalAerial,
Analog or Digital Aerial-Analogue tuning using “ ”/“
” and OK buttons.
Analogue Manual Search
Auto Channel Scan Menu Operation
Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analog stations.
Full: Searches and stores both analog and aerial
DVB stations.
• Whenever you select an automatic search type and
press OK button, a confirmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using .“ ” or “ ” and
OK button.
After selecting search type as analogue, you can use
“
”/“ ” button to highlight an item and then press “
” or “ ” button to set an option.
• After auto channel scan type is set and selected
and confirmed, installation process will start and
progress bar will move along. Press MENU button
to cancel process. In such a case, located channels
are not stored.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 15 -
Analog Fine Tune
Operating the Channel List
• Select Analog Fine Tune from the Installation menu
by using “ ” or “ ” and OK buttons.Analog fine tune
screen will be displayed. Analog Fine Tune feature
will not be available if there are no analog channels,
digital channels and external sources stored.
• Press OK button to proceed. Use “ ” or “ ” button
to set Fine Tune. When finished, press OK button
again.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
• Press “ ” or “ ” button to select the channel that
will be processed. Press “ ” or “ ” button to select
a function on Channel List menu.
Use this setting to clear channels stored. Press “ ” or
“
” button to select Clear Service List and then press
OK. The following OSD message will be displayed
on the screen:
• Use P+/P- buttons to move page up or down.
• Press BLUE button to view filtering options.
• Press MENU button to exit.
Moving a Channel
• First select the desired channel. Select Move option
in the channel list and press OK button.
Press OK to cancel. Select Yes by pressing “ ” or “
button and press OK to delete all of the channels.
”
• Edit Number screen will be displayed. Enter the
desired channel number by using the numeric
buttons on the remote control. If there is a previously
stored channel on that number, a warning screen
will be displayed. Select Yes if you want to move the
channel and press OK.
Managing Stations: Channel List
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
• Press OK button to process. Selected channel is
now moved.
• Press MENU button to view main menu. Select
Channel List item by using “ ” or “ ” button. Press
OK to view menu contents.
Deleting a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag channel.
• Select the channel that you want to delete and select
Delete option. Press OK button to continue.
• A warning screen will appear. Select YES to delete,
select No to cancel. Press OK button to continue.
Renaming a Channel
• Select the channel that you want to rename and
select Edit Name option. Press OK button to
continue.
Select Edit Channel List to manage all stored
channels. Use “ ” or “ ” and OK buttons to select
Edit Channel List.
• Pressing “ ” or “ ” button moves to the previous/
next character. Pressing “ ” or “ ” button toggles
the current character, i.e., ‘b’ character becomes ‘a’
by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
‘0...9’ replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.
• When finished, press OK button to save. Press
MENU to cancel.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 16 -
Locking a Channel
Managing Stations: Sorting
Channel List
You can select broadcasts to be listed in the channel
list. To display specific types of broadcast, you should
use Active channel list setting.
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag a single
channel.
• Select the channel that you want to lock and select
Lock option. Press OK button to continue.
Select Active channel list from the Channel list
menu by using “ ” or “ ” button. Press OK button
to continue.
• You will be asked to enter parental control PIN.
Default PIN is set as 0000. Enter the PIN number.
• Press OK button when the desired channel is
highlighted to lock/unlock the channel. Lock symbol
will be displayed next to the selected channel.
Managing Stations: Favourites
You can create a list of favourite programmes.
You can select a broadcast type option from the list
by using “ ” /“ ” and OK buttons.
• Press MENU button to view main menu. Select
Channel List item by using “ ” or “ ” button. Press
OK to view menu contents.
On-Screen Information
You can press INFO button to display on-screen
information. Details of the station and current
programme will be displayed on the information
banner.
• Select Favourites to manage favourite list. Use “
”/“ ” and OK buttons to select Favourites.
• You can set various channels as favourites so that
only the favourite channels are navigated.
The information banner gives information on the
channel selected and the programmes on it. The name
of the channel is displayed, along with its channel
list number.
Hint: Not all channels broadcast the programme
data. If the name and time of the programme are not
available, then information banner will be displayed
with blanks.
If the selected channel is locked, you must enter the
correct four-digit numeric code to view the channel
(default code is 0000). “Enter PIN” will be displayed
on the screen in such a case:
• Select a channel by using “ ” or “ ” button. Press
OK button to add selected channel to favourites list.
Press OK button again to remove.
Button Functions
• OK: Add/remove a station.
• YELLOW: Tag/untag a channel.
• GREEN: Tag/untag all channels.
• BLUE: Displays filtering options.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 17 -
When you select Videos from the main options,
available video files will be filtered and listed on this
screen. You can use “ ” or “ ” button to select a video
file and press OK button to play a video. If you select
a subtitle file and press OK button, you can select or
deselect that subtitle file. The following menu will be
displayed while playing a video file:
Media Playback Using Media
Browser
If the USB stick is not recognized after power off/on
or First Time Installation, first, plug the USB device
out and power off/on the TV set. Plug the USB device
in again.
To display Media Browser window, press either
“MENU” button on the remote control and then select
Media Browser by pressing “ ” or “ ” button. Press
OK button to continue. Media Browser menu options
will be displayed.
Play (RED button): Starts the video playback.
Stop (BLUE button): Stops the video playback.
Pause (OKbutton): Pause the video playback.
Rewind ( button): Goes backward.
Also, when you plug USB devices, media browser
screen will be displayed automatically:
Forward ( button): Goes forward.
Subtitle/Audio (LANG. button): Sets subtitle/Audio.
Yellow: Opens subtitle time correction menu
You can play music, picture and video files from the
connected USB memory stick. Use “ ” or “ ” button
to select Videos, Photos, Music or Settings.
Press RETURN (Exit) button to switch back to
previous menu.
You can connect two USB devices to your TV. If both
USB devices include music, picture or video files, USB
selection osd will be displayed on the screen. The
first USB device connected to the TV will be named
as USB Drive1.
Viewing Photos via USB
When you select Photos from the main options,
available image files will be filtered and listed on this
screen.
Select a device by using “ ” or “ ” button and press
OK.
Viewing Videos via USB
Jump (Numeric buttons):Jump to selected file using
the numeric buttons.
OK: Views the selected picture in full screen.
Slideshow (GREEN button): Starts the slideshow
using all images.
Loop/Shuffle (BLUE button): Press once to enable
Loop. Press again to enable both Loop and Shuffle.
Press once more to enable only Shuffle. Press again
to disable all. You can follow the disabled functions
with the change of the icons.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 18 -
FAV: Sorts files by date.
Loop/Shuffle (BLUE button): Press once to disable
Loop. Press again to disable both Loop and Shuffle.
Press once more to enable only Shuffle. Press again
to enable all. You can follow the disabled functions
with the change of the icons.
TEXT: Views images in thumbnails.
INFO: Changes filter options.
Slideshow Options
Media Browser Settings
Pause (YELLOW button) : Pauses the slideshow.
Continue (GREEN button) : Continues the
slideshow.
Previous/Next (Left/Right buttons): Jumps to
previous or next file on slideshow.
Rotate (Up/Down buttons): Rotates the image using
up/down buttons.
Loop/Shuffle (BLUE button): Press once to disable
Loop. Press again to disable both Loop and Shuffle.
Press once more to enable only Shuffle. Press again
to enable all. You can follow the disabled functions
with the change of the icons.
You can set your Media Browser preferences by
using the Settings dialog. Press “ ” or “ ” button to
highlight an item and use “ ” or “ ” button to set.
View Style: Sets default browsing mode.
Slide Show Interval: Sets slide show interval time.
Show Subtitle: Sets subtitle enabling preference.
RETURN (Exit): Back to file list.
INFO: Displays help screen.
Playing Music via USB
Subtitle Position: Sets subtitle position as up or
down.
When you select Music from the main options,
available audio files will be filtered and listed on this
screen.
Subtitle Font Size: Sets subtitle font size (max.
54pt).
Changing Image Size: Picture
Formats
• Programmes can be watched in different picture
formats, depending on the transmission received.
• You can change the aspect ratio (image size) of
the TV for viewing the picture in different zoom
modes.
• Press SCREEN button repeatedly to change
the image size. Available zoom modes are listed
below.
0..9 (Numeric buttons): Jumps to the selected file.
Auto
Play This (OK button) : Plays the selected file.
When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in
the broadcast signal or the signal from an external
device, the TV automatically changes the ZOOM
mode according to the WSS signal.
Play (GREEN button) : Plays all media files starting
with the selected one.
Stop (RED button) : Stops playback.
Pause (YELLOW button) : Pauses the selected
playback.
• When the AUTO mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, change to another ZOOM
mode manually.
Previous/Next (Left/Right buttons) : Jumps to
previous or next file to play.
FAV: Sorts files by Title,Artist or Album..
16:9
INFO: Changes filter options.
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 19 -
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.
Panoramic
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen, without
making the picture appear unnatural.
Subtitle
This zooms up the wide picture (16:9 aspect ratio)
with subtitles to the full screen.
The top and bottom of the picture are slightly cut off.
Cinema
Note: You can shift to screen up or down by pressing
This zooms up the wide picture (16:9 aspect ratio) to
the full screen.
“
” / “ ” buttons while picture zoom is selected as
panaromic, 14:9 Zoom, Cinema or Subtitle.
14:9
This zooms up the wide picture (14:9 aspect ratio) to
the upper and lower limits of the screen.
Configuring Picture Settings
You can use different picture settings in detail.
Press MENU button and select the Picture icon by
using “ ” or “ ” button. Press OK button to view
Picture Settings menu.
14:9 Zoom
This option zooms to the 14:9 picture.
4:3
Use to view a normal picture (4:3 aspect ratio) as this
is its original size.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 20 -
PC Position: Select this to display PC position menu
items.
Operating Picture Settings Menu Items
• Press “ ” or “ ” button to highlight a menu item.
• Use “ ” or “ ” button to set an item.
• Press MENU button to exit.
Picture Settings Menu Items
Mode: For your viewing requirements, you can set
the related mode option. Picture mode can be set
to one of these options: Cinema,Game,Dynamic
and Natural.
Contrast: Sets the lightness and darkness values
of the screen.
Autoposition: Automatically optimizes the display.
Press OK to optimize.
Brightness: Sets the brightness value for the
screen.
H Position: This item shifts the image horizontally to
right hand side or left hand side of the screen.
Sharpness: Sets the sharpness value for the objects
displayed on the screen.
V Position: This item shifts the image vertically
towards the top or bottom of the screen.
Colour: Sets the colour value, adjusting the colors.
Colour Shift: Adjust the desired colour tone.
Hue (NTSC only):Adjust the colour tone.
Dot Clock: Dot Clock adjustments correct the
interference that appear as vertical banding in
dot intensive presentations like spreadsheets or
paragraphs or text in smaller fonts.
Colour Temp: Sets the desired colour tone.
Setting Cool option gives white colours a slight blue
stress.
Phase: Depending on the resolution and scan
frequency that you input to the TV set, you may see
a hazy or noisy picture on the screen. In such a case
you can use this item to get a clear picture by trial
and error method.
For normal colours, select Normal option.
Setting Warm option gives white colours a slight red
stress.
Noise Reduction: If the broadcast signal is weak and
the picture is noisy, use Noise Reduction setting to
reduce the noise amount. Noise Reduction can be set
to one of these options: Low, Medium, High or Off.
Configuring Sound Settings
Sound settings can be configured according to your
personal preferences.
Press MENU button and select the Sound icon by
using “ ” or “ ” button. Press OK button to view
Sound Settings menu.
Game Mode: When Game Mode is set to On, specific
game mode settings, which are optimized for better
video quality, will be loaded.
Note: When Game Mode is on, some items in the
Picture Settings menu will be unavailable to be set.
Picture Zoom:Sets the picture size to Auto,16:9,
Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema.
Reset: Resets the picture settings to factory default
settings.
While in VGA(PC) mode, some items in Picture menu
will be unavailable. Instead, VGAmode settings will be
added to the Picture Settings while in PC mode.
PC Picture Settings
For adjusting PC picture items, do the following:
Press“ ”or“ ”buttontoselectPictureicon. Picturemenu
appears on the screen.
Contrast, Brightness, Colour, ColourTempandPicture
Zoomsettingsinthismenuareidenticaltosettingsdefined
in TV picture menu under “Main Menu System”.
Operating Sound Settings Menu Items
• Press “ ” or “ ” button to highlight a menu item.
• Use “ ” or “ ” button to set an item.
• Press MENU button to exit.
Sound,Settings and Source settings are identical to the
settings explained in main menu system.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 21 -
Sound Settings Menu Items
Volume: Adjusts volume level.
Equalizer: Press OK button to view equalizer sub-
menu.
Operating Settings Menu Items
• Press “ ” or “ ” button to highlight a menu item.
• Press OK button to select an item.
• Press MENU button to exit.
In equalizer menu, the preset can be changed to
Music, Movie, Speech, Flat, Classic and User.
Press the MENU button to return to the previous
menu.
Settings Menu Items
Note: Equalizer menu settings can be changed
manually only when the Equalizer Mode is in User.
Conditional Access: Controls conditional access
modules when available.
Balance: This setting is used for emphasizing left or
right speaker balance.
Language: Configures language settings.
Parental: Configures parental settings.
Timers: Sets timers for selected programmes.
Date/Time: Sets date and time.
Headphone: Sets headphone volume.
AVL:Automatic Volume Limiting (AVL) function sets the
sound to obtain fixed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Sources: Enables or disables selected source
options.
Other Settings: Displays other setting options of
the TV set.
Dynamic Bass: Dynamic Bass is used to increase
bass effect of the TV set.
Using a Conditional Access
Module
Surround Mode: Surround mode can be change as
On or Off.
Digital Out: Sets digital out audio type.
IMPORTANT: Insert or remove the CI module only
when the TV is SWITCHED OFF.
Configuring Your TV’s Settings
Detailed settings can be configured to suit your
personal preferences.
• In order to watch certain digital channels, a
conditional access module (CAM) can be necessary.
This module must be inserted in the CI slot of your
TV.
Press MENU button and select Settings icon by using
” or “ ” button. Press OK button to view Settings
menu.
“
• Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
• Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the rear
side of the TV.
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 22 -
Connect the TV to the mains supply, switch on • Audio: Changes the audio language for the current
and then wait for few moments until the card is
activated.
channel.
• Subtitle: Sets the subtitle language for the current
• When no module is inserted, “No Common
Interface module detected” message appears on
the screen.
channel.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
• Refer to the module instruction manual for details function as described below:
of the settings.
Language Settings
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
Press MENU button and select the icon by using “
” or “ ” button. Press OK button to view Settings
menu. Use “ ” or “ ” button to highlight Conditional
Access and press OK to view menu items.
Configuring Language
Preferences
You can operate the TV’s language settings using
this menu.
Press MENU button and select the Settings icon by
using “ ” or “ ” button. Press OK button to view
Settings menu. Use “ ” or “ ” button to highlight
In the configuration menu, highlight the Language
Language and press OK to continue:
Settings item by pressing “ ” or “ ” buttons. Press
OK and Language Settings submenu will be displayed
on the screen:
Use “ ” or “ ” buttons to highlight the menu item
that will be adjusted and then press “ ” or “ ” button
to set.
Notes:
• • System Language determines the on-screen menu
language.
• • Audio Language is used for selecting the
soundtrack of a channels.
• • Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options
are not available.
Use “ ” or “ ” button to set an item. Settings are
stored automatically.
Menu: displays the system language.
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
• Audio: Sets the preferred audio language.
• Subtitle: Sets the subtitle language. Selected
language will be seen in subtitles.
• Teletext: Sets teletext language.
• Guide: Sets the preferred Guide language.
Current (*)
(*) These settings can be changed if only the
broadcaster supports. Otherwise, settings will not be
available to be changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 23 -
Set PIN: Defines a new PIN number. Use numeric
buttons to enter a new pin number. You will need
to code your new pin a second time for verification
purposes.
Parental Control
To prohibit viewing of certain programmes, channels
and menus can be locked by using the parental
control system.
IMPORTANT: The factory default pin number is 0000,
if you change the pin number make sure you write it
down and keep it safe.
This function enables or disables the menu protection
system and allows the PIN code to be changed.
Press MENU button and select the Settings by using
Timers
“
” or “ ” button. Press OK button to view Settings
To view Timers menu, press MENU button and select
Settings icon by using “ ” or “ ” button. Press OK
button to view Settings menu. Use “ ” or “ ” button
to highlight Timers and press OK to continue:
menu. Use “ ” or “ ” button to highlight Parental
and press OK to continue:
Setting Sleep Timer
This setting is used for setting the TV to turn off after
a certain time.
To display parental lock menu options, PIN number
should be entered. Factory default PIN number is • Highlight Sleep Timer by using “ ” or “ ” button.
0000. After coding the correct PIN number, parental
settings menu will be displayed:
• Use “ ” or “ ” button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.
Setting Programme Timers
You can set programme timers for a particular
programme using this feature.
Press “ ” button to set timers on an event. Programme
timer function buttons will be displayed on the
screen.
Adding a Timer
• Press YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Parental Settings Menu Operation (*)
Channel: Changes channel by using “ ” or “ ”.
• Select an item by using “ ” or “ ” button.
Timer Type: This feature is unavailable to be set.
• Use “ ” or “ ” button to set an item.
Date: Enter a date using the numeric buttons.
• Press OK button to view more options.
Start: Enter a starting time using the numeric
buttons.
(*) If you set Country option as UK in the first time
installation, Maturity Lock and Child Lock options
End: Enter an ending time using the numeric
buttons.
will not be visible. This setting is available only for
EU countries.
Duration: Displays duration between the starting and
ending time.
Menu Lock: Menu lock setting enables or disables
the menu access. You can disable access to the
installation menu or the whole menu system.
Mode: Sets a timer to be repeated as Once, Daily or
Weekly. Use “ ” or “ ” buttons to select an option.
Maturity Lock: When set, this option gets the maturity
information from the broadcast and if this maturity level
is disabled, disables access to the broadcast.
• Press GREEN button to save the timer. Press RED
button to cancel.
Child Lock: When Child Lock is set, the TV can only
be controlled by the remote control. In this case the
control panel buttons will not work, except for the
Standby/On button. When Child Lock is activated
you are able to switch the TV into Standby mode with
the Standby/On button. To switch the TV on again,
you need the remote control. Hence, if one of those
buttons is pressed, Child Lock Is On will be displayed
on the screen when the menu screen is not visible.
Change/Delete:Controls parental settings on timers.
Editing a Timer
• Select the timer you want to edit by pressing “
or “ ” button.
”
• Press GREEN button. Edit Timer menu screen will
be displayed.
• When finished with editing, press GREEN button to
save. You can press MENU button to cancel.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 24 -
Deleting a Timer
Configuring Source Settings
You can enables or disable selected source options.
The TV will not switch to the disabled source options
when SOURCE button is pressed.
• Select the timer you want to delete by pressing “
” or “ ” button.
• Press RED button.
• Select YES by using “ ” or “ ” buttons to delete the
timer. Select NO to cancel.
Configuring Date/Time Settings
Select Date/Time in the Settings menu to configure
Date/Time settings. Press OK button.
• Select Sources in the Settings menu and press
OK button.
• Use “ ” or “ ” buttons to highlight Date/Time.
• Press“ ” or “ ” buttons to select a source.
Date,Time,Time Settings Mode and Time Zone Setting
will be available.
• Use “ ” or “ ” button to enable or disable the selected
source. Changes are automatically stored.
Use “ ” or “ ” buttons to highlight the Time Settings
Mode. Time Settings Mode is set using “ ” or “
buttons. It can be set to AUTO or MANUAL.
”
Configuring Other Settings
To view general configuration preferences, select
Other Settings in the Settings menu and press OK
button.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
• Changes are automatically stored. Press MENU
to exit.
Operation
• Press “ ” or “ ” buttons to select an item.
• Use “ ” or “ ” button to set an option.
• Press OK button to view a sub-menu.
Menu Timeout: Changes timeout duration for menu
screens.
Scan Encrypted: When this setting is on, search
process will locate the encrypted channels as well. If
it is set as Off, encrypted channels will not be located
in automatic search or manual search.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 25 -
Backlight: This setting controls the backlight level and
it can be set to Maximum, Minimum, Medium.
Other Features
Displaying TV Information: Programme Number,
Programme Name, Sound Indicator, time, teletext,
channel type and resolution information is displayed
on the screen when a new programme is entered or
Power Save Mode : Use “ ” or “ ” button to select
Power Save Mode. Press “ ” or “ ” button to set
Power Save Mode as On or Off. See the section,
“Environmental Information” in this manual for further
information on Power Save Mode.
“INFO/
” button is pressed.
Mute Function: Press “ ” button to disable sound.
Mute indicator will be displayed in the upper side of
the screen. To cancel mute, there are two alternatives;
the first one is pressing the “ ” button and the second
one is increasing the volume level.
Note : Backlight function will be invisible if Power Save
Mode is set to on.
Blue Background: Activates or deactivates blue
background system when the signal is weak or
absent.
Picture Mode Selection: By pressing PRESETS
button, you can change Picture Mode settings in
accordance with your viewing requirements.Available
options are Dynamic, Natural, Cinema and Game.
Software Upgrade: To ensure that your TV always
has the most update information, you can use this
setting. In order for the proper operation, please
ensure that the TV is set to standby mode.
Displaying Subtitles: You can enable subtitles by
pressing the SUBTITLE button of the remote control.
Press SUBTITLE button again to disable subtitle
function.
If “Subtitle” is On, pressing the “ ” button causes the
following warning message display on the screen (**
for UK only)
You can enable or disable automatic upgrade by
setting Automatic Scanning option.
You can manually search for new software by
selecting Scan for upgrade.
Hard of Hearing: If the broadcaster enables any
special signal concerning the audio, you can set this
setting as On to receive such signals.
Audio Description: Audio description refers to
an additional narration track for blind and visually
impaired viewers of visual media, including television
and movies. The description narrator talks through
the presentation, describing what is happening on the
screen during the natural pauses in the audio (and
sometimes during dialogue, if deemed necessary).
You can use this feature, only if the broadcaster
supports that additional narration track.
Auto TV Off: You can set the timeout value of auto off
feature.After the timeout value is reached and the Tv is
not operated for selected time , the TV will go off.
Standby Search
Use “ ” or “ ” button to select Standby Search and
then press “ ” or “ ” button to set this setting as On or
Off. If you change Standby Search to Off, this function
will be unavailable.To use Standby search please
make sure that you select Standby Search as On.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 26 -
Teletext
Tips
Teletext system transmits information such as news, Screen Care: Clean the screen with a slightly damp,
sports and weather on your TV. Note that is the signal soft cloth. Do not use abrasive solvents as they may
degrades, for example in poor/adverse weather damage the coating layer of the TV screen. For your
conditions, some text errors may occur or the teletext safety, unplug the mains plug when cleaning the
mode may be aborted.
set. When moving the TV, hold it properly from the
bottom part.
Teletext function buttons are listed below:
Image Persistence: Please note that ghosting may
occur while displaying a persistent image.LCD TVs’
image persistence may disappear after a short time.
Try turning off the TV for a while.
“
” Teletext / Mix : Activates teletext mode when
pressed once. Press again to place the teletext screen
over the programme (mix).Pressing again will quit the
teletext mode.
To avoid this, do not leave the screen in still picture
for extended periods.
“RETURN” Index: Selects the teletext index page.
“INFO/?”Reveal: Shows hidden information (e.g.
solutions of games).
No Power: If your TV system has no power, please
check the main power cable and connection to the
mains socket outlet.
“OK” Hold: Holds a text page when convenient. Press
again to resume.
Poor Picture: Have you selected the correct TV
system? Is your TV set or house aerial located too close
to a non-earthed audio equipment or neon lights, etc.?
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the aerial.
Is the picture or teletext unrecognisable? Check if you
have entered the correct frequency. Please retune the
channels. The picture quality may degrade when two
peripherals are connected to the TV at the same time.
In such a case, disconnect one of the peripherals.
“
”/“ ” Subcode Pages : Selects subcode pages if
available when the teletext is activated.
P+ / P- and numbers (0-9): Press to select a page.
Note: Most TV stations use code 100 for their index
pages.
Coloured Buttons (RED/GREEN/YELLOW/
BLUE)
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics. When
FASTEXT system is available, sections in a teletext
page will become colour-coded and can be selected
by pressing the coloured buttons. Press a coloured
button that corresponds to with your needs. The
coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing “ ” or “ ” commands will request
the next or previous page respectively.
No Picture: Is the aerial connected properly?Are the
plugs connected tightly to the aerial socket? Is the
aerial cable damaged? Are suitable plugs used to
connect the aerial? If you are in doubt, consult your
dealer. No Picture means that your TV is not receiving
a transmission. Have you selected the correct button
on the remote control? Try once more.Also make sure
the correct input source has been selected.
Sound: You can not hear any sound. Did you perhaps
interrupt the sound, pressing the
button? Sound is
coming from only one of the speakers. Is the balance
set to one extreme? See Sound Menu.
Remote Control: Your TV no longer responds to the
remote control. Perhaps the batteries are exhausted.
If so you can still use the local buttons on the TV.
Input Sources: If you cannot select an input source,
it is possible that no device is connected. Check
the AV cables and connections if you have tried to
connect a device
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 27 -
Appendix A: PC Input Typical
Display Modes
Appendix B: AV and HDMI Signal
Compatibility (Input Signal Types)
The display has a maximum resolution of 1360 x 768.
The following table is an illustration of some of the
typical video display modes. Your TV may not support
different resolutions. Supported resolution modes are
listed below. If you switch your PC to an unsupported
mode, a warning OSD will appear on the screen.
Source
Supported Signals
PAL 50/60
NTSC 60
RGB 50
Available
O
O
O
O
O
O
X
EXT-1
(SCART-1)
RGB 60
Index
Resolution
640x400
Frequency
70 Hz
60 Hz
75 Hz
60 Hz
75 Hz
60 Hz
70 Hz
75 Hz
75 Hz
60 Hz
60 Hz
60 Hz
PAL 50/60
NTSC 60
RGB 50
1
2
EXT-2
(SCART-2)
640x480
3
640x480
RGB 60
X
4
800x600
PAL 50/60
NTSC 60
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
SIDE AV
5
800x600
6
1024x768
1024x768
1024x768
1152x864
1280x768
1280x1024
1360x768
480I
480P
576I
60Hz
60Hz
50Hz
50Hz
50Hz
60Hz
50Hz
60Hz
50Hz
60Hz
60Hz
60Hz
50Hz
50Hz
50Hz
60Hz
50Hz
60Hz
50Hz
60Hz
24 HZ
7
8
9
576P
720P
720P
1080I
1080I
1080P
1080P
480I
10
11
12
YPbPr
Note : Your PC may not work correctly with some
resolution modes which are listed above because of
unexpected causes. When you confront with such
a problem, please try switching your PC to different
resolution modes.
480P
576I
576P
720P
720P
1080I
1080I
1080P
1080P
1080P
HDMI1
HDMI2
(X: Not Available, O: Available)
In some cases a signal on the LCD TV may not be displayed
properly. The problem may be an inconsistency with standards
from the source equipment (DVD, Set-top box, etc. ). If you
do experience such a problem please contact your dealer and
also the manufacturer of the source equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 28 -
Appendix C: Supported DVI Resolutions
When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer
to the following resolution information.
24Hz
25Hz
30Hz
50Hz
60Hz
480i
480p
576i
;
;
;
;
;
;
;
576p
720p
1080i
1080p
;
;
;
;
;
;
Appendix D: Supported File Formats for USB Mode
Supported Formats
File extension
.avi
Container
Video
Audio
MPEG4,MPEG2,
Xvid, H.264
AVI
MP3,AC3,LPCM,ADPCM
.mkv
.mp4
MKV
H.264, MPEG1,2,4
H.264,MPEG4
MP3,AC3,LPCM,ADPCM
MP3,AAC
AVI,MP4
.dat
.mpg
.mpeg
Mpeg1,2
Mpeg1,Mpeg2
AC3,MPEG Audio, LPCM
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 29 -
Appendix E: Software Upgrade
• Your TV is capable of finding and updating new software upgrades over broadcast channels.
• For broadcast channels search, TV looks the available channels stored in your settings. So before software
upgrade search, it is advised to auto search and update all available channels.
1) Software upgrade search via user interface
• It is possible manually to check if there is a new software upgrade for your TV set.
• Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings
menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu.
• In Upgrade Options menu select Scan for upgrade and press OK button.
• If a new upgrade is found, it starts to download the upgrade.Aprogress bar indicates the remaining download
progress. When download completes with success a message is displayed for reboot to activate new software.
Press OK to continue with the reboot operation.
2) 3.AM search and upgrade mode
• If Automatic scanning in Upgrade Options menu is enabled, TV wakes up at 03:00 and searches broadcast
channels for new software upgrade. If new software is found and downloaded successfully, with next power
up TV opens with new software version.
Note on reboot operation: Reboot is the last step in software upgrade operation if download of new software is
finished successfully. During reboot TV makes final initializations. In reboot sequence panel power is closed and
front led indicates the activity with blinking. Around 5 minutes later TV restarts with new software activated.
• If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. TV should open with
new software safely. If you still can not get TV working, please kindly repeat unplug and plug sequence a few
times more. If your set still can not operate, please call the service personnel to fix the problem for you.
Caution: While led is blinking during reboot do not unplug your TV’s power. Doing this may cause
your TV not to re-open again and can only be fixed by service personnel.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 30 -
Specifications
TV BROADCASTING
PAL/SECAM B/G D/K K’ I/I’ L/L’
RECEIVING CHANNELS
VHF (BAND I/III)
Digital Reception (DVB-T)
Transmission Standards:
DVB-T, MPEG2, DVB-T, MPEG4 HD
i. DEMODULATION
• -Symbol rate: COFDM with 2K/8K FFT mode.
UHF (BAND U)
• -Modulation: 16-QAM - 64-QAM FEC for all DVB
modes (automatically found)
HYPERBAND
• MHEG-5 ENGINE compliant with ISO/IEC 13522-5
UK engine Profile (UK only)
NUMBER OF PRESET CHANNELS
1000
• Object carousel support compliant with ISO/IEC
135818-6 and UK DTT profile(UK only)
CHANNEL INDICATOR
On Screen Display
• Frequency range: 474-850 MHz for UK models
RF AERIAL INPUT
ii. VIDEO
75 Ohm (unbalanced)
OPERATING VOLTAGE
220-240V AC, 50 Hz.
AUDIO
• -H.264 (MPEG-4 part 10) main and high profile level
4.1/MPEG-2 MP@HL video decoder.
• -HD display multi format capable (1080i, 720p,
576p)
• -CVBS analogue output.(In HD channels, this will
not be available
German + Nicam Stereo
AUDIO OUTPUT POWER (WRMS.) (10% THD)
2 x 6
iii. AUDIO
• -MPEG-1 layer I/II, MPEG-2 layer II, AAC, HEAAC,
AC3, E-AC3
POWER CONSUMPTION (W)
135 W (max)
• -Sampling frequencies supported are 32, 44.1 &
48 kHz
< 1 W (Standby)
PANEL
16:9 display, 32” Screen Size
DIMENSIONS (mm)
DxLxH (With foot): 202 x 777 x 540
Weight (Kg): 10
DxLxH (Without foot): 37,5 x 777 x 498
Weight (Kg): 9,5
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 31 -
Important Instruction
For your own safety read following instruction carefully before attempting to connect this unit to the mains
supply.
MAINS (AC) OPERATION
The wires in the mains lead are coloured in accordance with the following code :
GREEN
&
FUSE
YELLOW
(Earth)
(if there is earth cable)
BROWN
(Live)
BLUE
(Neutral)
IMPORTANT
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal which is marked with
the letter E, or by the earth symbol, or coloured green or green and yellow.
The wire which is coloured blue or black must be connected to the terminal which is marked with the
letter N or coloured Black.
The wire which is coloured brown or red must be connected to the terminal which is marked with the
letter L or coloured Red.
For continued protection against risk of fire, replace only with same type and rating of fuse (ASTA
approved 5A 250VAC fuse).
CAUTION
TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING
COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
SAFETY PRECAUTION
THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT
ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.
Download from Www.Somanuals.com. All Manuals Search And Download.
English - 32 -
|