GXR DIGITAL CAMERA BODY
Camera Body User Guide
The product serial number can be found on the bottom of
the camera body.
Before You Begin
Before using your camera body, take a few moments to familiarize
yourself with the controls and displays (pages 1–10). Refer to this
section as you read through the rest of the manual.
Basic Photography and Playback
Read this section before using the camera for the first time. It covers the
steps involved in readying the camera for use, taking photographs,
and playing them back (pages 11–44).
Reference
Read this section for information on topics not covered in “Basic Photography
and Playback.”It covers advanced shooting and playback options, and
describes how to print photographs, customize camera settings,
and copy pictures to a computer (pages 45–187).
The rechargeable battery needs to be charged before use. The
battery is not charged at the time of purchase.
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
• Safety precautions: Read all safety precautions thoroughly to ensure
safe use.
• Test shots: Take test shots to ensure that the camera is working
properly before taking photos on important occasions.
• Copyright: Reproduction or alteration of copyrighted documents,
magazines, and other materials, other than for personal, home,
or other similarly limited purposes, without the consent of the
copyright holder, is prohibited.
• Exemption from liability: Ricoh Co., Ltd. assumes no liability for failure to
record or display images as a result of product malfunction.
• Warranty: This product is manufactured to local specifications and the
warranty is valid within the country of purchase. The manufacturer
assumes no responsibility for servicing the product in other countries
or bearing any expense thereby incurred.
• Radio interference: Operating this product in the vicinity of other
electronic equipment may adversely affect both the camera and
the other device. Interference is particularly likely if the camera is
used in close proximity to a radio or television. This can be resolved
by moving the camera as far as possible from the other device,
reorienting the radio or television antenna, or plugging the radio or
television into a different outlet.
© 2009 RICOH CO., LTD. All rights reserved. This publication may not
be reproduced in whole or in part without Ricoh’s express written
permission. Ricoh reserves the right to change the contents of this
document at any time without prior notice.
Every effort has been made to ensure the accuracy of the information in
this document. Should you nevertheless notice any errors or omissions,
we would be grateful if you would notify us at the address listed on the
back cover of this booklet.
Microsoft, Windows, Windows Vista, and Internet Explorer are registered
trademarks of Microsoft Corporation in the United States of America
and other countries. Macintosh and Mac OS are registered trademarks of
Apple Inc. in the United States of America and other countries. Adobe,
the Adobe logo, and Adobe Reader are trademarks of Adobe Systems
Incorporated.
HDMI, the
Logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
All other trade names mentioned in this document are the property of
their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Downloadi.ii
Safety Precautions
WarningSymbols
Various symbols are used throughout this instruction manual and
on the product to prevent physical harm to you or other people and
damage to property. The symbols and their meanings are explained
below.
This symbol indicates matters that may lead to
imminent risk of death or serious injury if ignored or
incorrectly handled.
Danger
This symbol indicates matters that may lead to death
or serious injury if ignored or incorrectly handled.
Warning
Caution
This symbol indicates matters that may lead to injury
or physical damage if ignored or incorrectly handled.
SampleWarnings
The symbol alerts you to actions that must be performed.
The symbol alerts you to prohibited actions.
The symbol may be combined with other symbols to indicate
that a specific action is prohibited.
Examples
Do not touch
Do not disassemble
Observe the following precautions to ensure safe use of this
equipment.
Danger
Do not attempt to disassemble, repair or alter the equipment
yourself. The high-voltage circuitry in the equipment poses
significant electrical hazard.
Do not attempt to disassemble, alter or directly solder the
battery.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not put the battery in a fire, attempt to heat it, use it in a
high temperature environment such as next to a fire or inside a
car, or abandon it. Do not put it into water or the sea or allow it
to get wet.
Do not attempt to pierce, hit, compress, drop, or subject the
battery to any other severe impact or force.
Do not use a battery that is significantly damaged or deformed.
Warning
Turn off the power immediately in the event of abnormalities
such as smoke or unusual odors being emitted. Remove the
battery as soon as possible, being careful to avoid electric
shocks or burns. If you are drawing power from a household
electrical outlet, be sure to unplug the power cord from the
outlet to avoid fire or electrical hazards. Discontinue use of the
equipment immediately if it is malfunctioning. Contact the
nearest service center at your earliest convenience.
Turn off the power immediately if any metallic object, water,
liquid or other foreign object gets into the camera body.
Remove the battery and memory card as soon as possible,
being careful to avoid electric shocks or burns. If you are
drawing power from a household electrical outlet, be sure to
unplug the power cord from the outlet to avoid fire or electrical
hazards. Discontinue use of the equipment immediately if it
is malfunctioning. Contact the nearest service center at your
earliest convenience.
Download from Www.Somanuals.com. All Manuals Search And Downloadv.
Avoid any contact with the liquid crystal inside the picture
display, should the monitor be damaged. Follow the
appropriate emergency measures below.
• SKIN: If any of the liquid crystal gets on your skin, wipe it off
and rinse the affected area thoroughly with water, then wash
well with soap.
• EYES: If it gets in your eyes, wash your eyes with clean water
for at least 15 minutes and seek medical advice immediately.
• INGESTION: If any of the liquid crystal is ingested, rinse the
mouth out thoroughly with water. Have the person drink a
large amount of water and induce vomiting. Seek medical
assistance immediately.
Follow these precautions to prevent the battery from leaking,
overheating, igniting or exploding.
• Do not use a battery other than those specifically
recommended for the equipment.
• Do not carry or store together with metal objects such as
ballpoint pens, necklaces, coins, hairpins, etc.
• Do not put the battery into a microwave or high pressure
container.
• If leakage of battery fluid or a strange odor, color change, etc.
is noticed during use or during charging, remove the battery
from the camera body or battery charger immediately and
keep it away from fire.
Please observe the following in order to prevent fire, electrical
shock or cracking of the battery while charging.
• Use only the indicated power supply voltage. Also avoid the
use of multi-socket adapters and extension cords.
• Do not damage, bundle or alter power cords. Also, do not
place heavy objects on, stretch or bend power cords.
• Do not connect or disconnect the power plug with wet hands.
Always grip the plug section when disconnecting a power
cord.
• Do not cover equipment while charging.
vDi ownload from Www.Somanuals.com. All Manuals Search And Download.
Keep the battery and SD memory card used in this equipment
out of the reach of children to prevent accidental ingestion.
Consumption is harmful to human beings. If swallowed, seek
medical assistance immediately.
Keep the equipment out of the reach of children.
Do not touch the internal components of the equipment if they
become exposed as a result of being dropped or damaged. The
high-voltage circuitry in the equipment could lead to an electric
shock. Remove the battery as soon as possible, being careful
to avoid electric shocks or burns. Take the equipment to your
nearest dealer or service center if it is damaged.
Do not use the equipment in wet areas as this could result in fire
or electric shock.
Do not use the equipment near flammable gases, gasoline,
benzene, thinner or similar substances to avoid the risk of
explosion, fire or burns.
Do not use the equipment in locations where usage is restricted
or prohibited as this may lead to disasters or accidents.
Wipe off any dust that accumulates on the electrical plug as this
may lead to fire.
To avoid the risk of fire, electric shock or injury, do not use
the battery charger with commercially available electronic
transformers when traveling abroad.
Download from Www.Somanuals.com. All Manuals Search And Downloadv. ii
Observe the following precautions to ensure safe use of this unit.
Caution
Contact with fluid leaking from a battery can lead to burns. If
part of your body comes in contact with a damaged battery,
rinse the area with water immediately. (Do not use soap.)
If a battery starts to leak, remove it immediately from the
equipment and wipe the battery chamber thoroughly before
replacing it with a new battery.
Plug the power cords securely into the electrical outlets. Loose
cords pose a fire hazard.
Do not allow the camera body to get wet. In addition, do not
operate it with wet hands. Both pose the risk of electric shock.
Do not fire the flash at drivers of vehicles, as this may cause the
driver to lose control and result in a traffic accident.
Safety
Precautions for instructions provided with the product before
Accessories using that product.
When using optional products, carefully read the
viiDi ownload from Www.Somanuals.com. All Manuals Search And Download.
Product Manuals
The following manuals are provided with the GXR camera body:
CameraBodyUserGuide (this booklet)
This guide describes how to use your camera and install the
supplied software.
* Read this guide along with the documentation provided
with the camera unit.
SoftwareUserGuide (pdf file)
The Software User Guide describes how to copy pictures from
your camera body to a computer for display and editing. It is
available in several languages, each in its own folder in the
“DC Manual”folder on the supplied CD.
For ease of reference, copy the
pdf file from the CD to your
computer hard disk.
“Irodio Photo & Video Studio”image viewing and editing software
is also included with this product. For information on using this
software, see the Help menu in Irodio Photo & Video Studio or
telephone one of the following customer support centers:
• North America (U.ꢀS.ꢀA.):
+1–800–458–4029 (toll free)
• U. K., Germany, France, and Spain: +800–1532–4865 (toll free)
• Other European countries:
• China:
• Other Asian countries:
Business hours: 9:00 AM to 5:00 PM
+44–1489–564–764
+86–21–5385–3786
+63–2–438–0090
Download from Www.Somanuals.com. All Manuals Search And Downloadi.x
Table of Contents
Package Contents...................................................................................................... ii
Notices.............................................................................................................................iii
Safety Precautions ....................................................................................................iv
Product Manuals........................................................................................................ix
Before You Begin
1
Read this section before using your camera body for the first time.
Introduction .................................................................................... 2
Parts of the Camera Body .....................................................................................2
Basic Photography and Playback
11
Read this section before using your camera for the first time.
First Steps.......................................................................................12
Charging the Battery.............................................................................................12
Inserting the Battery .............................................................................................14
Inserting Memory Cards.....................................................................................15
Attaching the Camera Unit to the Camera Body................................17
Turning the Power On and Off.......................................................................18
Basic Setup..................................................................................................................20
Taking Photographs.....................................................................21
Holding the Camera..............................................................................................21
Taking a Photograph.............................................................................................22
Zoom..............................................................................................................................26
Close-ups (Macro Mode)....................................................................................27
Flash Photography .................................................................................................28
Self-Timer .....................................................................................................................31
Tilt Indicator................................................................................................................32
Viewing and Deleting Photographs..........................................34
Viewing Photographs...........................................................................................34
Deleting Photographs..........................................................................................39
O (DISP.) Button...................................................................................................42
x
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
45
Read this section for more information on camera functions.
More on Photography .................................................................46
Mode P: Program Shift.........................................................................................46
Mode A: Aperture Priority..................................................................................48
Mode S: Shutter Priority ......................................................................................49
Mode M: Manual Exposure...............................................................................50
4 Mode: Settings for Various Scenes..............................................52
“MY”Modes: Using Custom Settings...........................................................57
Shooting Menu ........................................................................................................58
Playback Functions ......................................................................94
Viewing Movies........................................................................................................94
Viewing MP Files......................................................................................................95
Playback Menu............................................................................101
Playback Menu ...................................................................................................... 101
Viewing Pictures on TV..................................................................................... 118
Printing Photographs ................................................................120
Connecting the Camera Body ..................................................................... 120
Printing....................................................................................................................... 122
Camera Settings..........................................................................126
Key Custom Options.......................................................................................... 129
Setup............................................................................................................................ 139
Copying Pictures to a Computer..............................................151
Windows.................................................................................................................... 151
Macintosh................................................................................................................. 162
Technical Notes...........................................................................167
Troubleshooting................................................................................................... 167
Specifications.......................................................................................................... 175
Optional Accessories ......................................................................................... 178
Using the Product Abroad.............................................................................. 183
Precautions for Use............................................................................................. 183
Care and Storage.................................................................................................. 185
Warranty and Servicing.................................................................................... 186
NOTICES..................................................................................................................... 187
Index .............................................................................................188
Download from Www.Somanuals.com. All Manuals Search And Downloadx. i
xiDi ownload from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
Read this section before using your camera
body for the first time.
Introduction .............................................................. 2
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ.
Introduction
This manual describes how to take pictures and play
them back. To ensure that you get the most from this
product, read this manual thoroughly before use and
keep it handy when using the product.
Parts of the Camera Body
For more information, refer to the page number to the
right of each item.
Front
1 2 3 4 5 6
7
8 9 10
14
13
12 11
1 Up-downꢀdialꢀ................................5
9 Microphoneꢀ..................................–
2 Modeꢀdialꢀlockꢀreleaseꢀ...................4 10ꢀ Strapꢀeyeletꢀ...................................ii
3 Modeꢀdialꢀ......................................4 11ꢀ Alignmentꢀmarkꢀforꢀattachingꢀ
cameraꢀunitꢀ.................................17
12ꢀ Connectorꢀ....................................17
13ꢀ Cameraꢀunitꢀreleaseꢀleverꢀ............17
14ꢀ Flashꢀ............................................28
4 Shutter-releaseꢀbuttonꢀ..........21,ꢀ23
5 Powerꢀswitchꢀ.........................18,ꢀ21
6 AFꢀauxiliaryꢀlightꢀ.................31,ꢀ140
7 Hotꢀshoeꢀ....................................181
8 Flashꢀcover...................................29
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Back
5
9 10 11
1
2
3
12
13
14
4
15
22 21 20 19 18 6 7 8
17
16
23
1 DIRECTꢀbuttonꢀ..............................5 14ꢀ Directionalꢀpadꢀ............................37
+ꢀ(!)ꢀ.....................................137
–ꢀ(%)ꢀ.....................................137
Fn1ꢀ(Function1)ꢀ(#)ꢀ...............136
Fn2ꢀ(Function2)ꢀ($)ꢀ...............136
2 OPEN/f(flash)ꢀbuttonꢀ................29
3 VF/LCDꢀbutton.............................42
4 Pictureꢀdisplayꢀ...............................8
5 Autofocus/flashꢀlamp
ꢀ................................ 18,ꢀ22,ꢀ29ꢀ,141
6 ConnectorꢀforꢀUSBꢀcable
ꢀ.......................... 120,ꢀ159,ꢀ160,ꢀ162
7 ConnectorꢀforꢀA/Vꢀcableꢀ.............118
15ꢀ C/Dꢀbutton
ꢀ....................................58,ꢀ101,ꢀ126
16ꢀ Oꢀ(DISP.)ꢀbuttonꢀ....................42
17ꢀ tꢀ(self-timer)/dꢀ(delete)ꢀbutton
ꢀ..............................................31,ꢀ39
8
ConnectorꢀforꢀHDMIꢀminiꢀcableꢀ...119
18ꢀ Tripodꢀscrewꢀholeꢀ......................176
19ꢀ Battery/cardꢀcoverꢀ.................14,ꢀ15
20ꢀ Releaseꢀleverꢀ.........................14,ꢀ15
21ꢀ Speakerꢀ........................................–
22ꢀ Strapꢀeyeletꢀ...................................ii
23ꢀ Connectorꢀcoverꢀ.................118,ꢀ121
9 ADJ.ꢀleverꢀ..............................5,ꢀ134
10ꢀ 6ꢀ(playback)ꢀbutton
ꢀ................................ 19,ꢀ34,ꢀ94,ꢀ101
11ꢀ Nꢀ(macro)ꢀbuttonꢀ......................27
12ꢀ 8ꢀ(telephoto)/zꢀ(enlargedꢀ
view)ꢀbuttonꢀ.........................26,ꢀ36
13ꢀ 9ꢀ(wide-angle)/Zꢀ(thumbnailꢀ
display)ꢀbuttonꢀ......................26,ꢀ36
Download from Www.Somanuals.com. All Manuals Search And Downloadꢁ.
Mode Dial
1
Before shooting, press the
mode dial lock release (1)
and rotate the mode dial
to choose a shooting mode
(2).
2
P (program shift):
You choose from choose an aperture choose
combinations
shutter
A (aperture priority):You S (shutter priority): You
shutter
of and let the camera speed and let the
speed adjust the shutter camera adjust
a
and aperture that speed for optimal aperture for optimal
produce the same exposure (page 48).
exposure (page 46).
exposure (page 49).
M (manual exposure):
You choose shutter
speed and aperture
(page 50).
5 (auto): The camera
sets shutter speed
and aperture for
optimal
exposure
(page 21).
4 (scene):
Optimize settings for
the current subject
or scene, or shoot
movies (page 52).
MYꢀ, MY2, MYꢁ (“my settings”): Recall settings
saved using Reg. My Settings (pages 57,
129).
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Up-down Dial and ADJ. Lever
Up-down dial
When viewing pictures or
navigating the menus, you can
use the up-down dial in place of
+ and –, and the ADJ. lever in place
of Fnꢀ and Fn2. The ADJ. lever and
up-down dial can also be used to
select shutter speed and aperture
in P, A, S, and M modes.
ADJ. lever
You can assign frequently-used shooting menu items
to the ADJ. lever for easy access (page 134). To display a
shooting menu item, center the ADJ. lever and press it in;
you can then use the lever and up-down dial to select an
option.
Note
The M Mode Dial Options and Playback Mode Dial Options
items in the key custom options tab can be used to change the
assigned functions of the up-down dial and ADJ. lever (page 138).
DIRECT Button
Press the DIRECT button in the
shooting mode to display the
current shooting settings.
DIRECT
Download from Www.Somanuals.com. All Manuals Search And Downloadꢃ.
DIRECTscreen
For more information, refer to the page number to the
right of each item.
1
2
3
8
4
5
7
6
9
10
13
12
18
11
15
14 16 17
1 Shootingꢀmodeꢀ..............................4 10ꢀ Exposureꢀmeteringꢀ......................70
2 Apertureꢀ..........................46,ꢀ48,ꢀ50 11ꢀ Imageꢀsettingsꢀ............................71
3 Shutterꢀspeedꢀ..................46,ꢀ49,ꢀ50 12ꢀ Pictureꢀquality/size/movieꢀsizeꢀ....61
4 Flashꢀmodeꢀ..................................28 13ꢀ Bracketingꢀ...................................75
5 Flashꢀcompensation/manual
flashꢀamountꢀ.........................78,ꢀ79
6 Exposureꢀcompensationꢀ..............85
7 ISOꢀ...............................................90
8 Whiteꢀbalanceꢀ.............................86
9 Focusꢀmodeꢀ.................................64
14ꢀ Continuousꢀ..................................73
15ꢀ Informationꢀareaꢀ...........................7
16ꢀ Macroꢀmodeꢀ................................27
17ꢀ AEꢀLockꢀ......................................136
18ꢀ Self-timerꢀ....................................31
Changing the Shooting Settings on the DIRECT screen
On the DIRECT screen, move the cursor using +, –, Fnꢀ,
Fn2 or the ADJ. lever (left and right) to highlight an item,
and change the setting directly using the up-down dial.
The exposure compensation can be adjusted using +
and – instead of the up-down dial.
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the Options for the Shooting Settings
Pressing the ADJ. lever when an item is highlighted on
the DIRECT screen displays the options for the setting
item. Select the desired option using + and –, or the up-
down dial, and then press the ADJ. lever or the C/
D button to set the option.
Caution
The settings of shooting mode, macro mode, self-timer, and flash
mode for built-in flash cannot be changed by selecting the item
on the DIRECT screen. Change the settings using the mode dial
or the buttons on the camera body.
Notes
• Pressing the DISP. button changes the setting of background
image (page 140).
• Pressing C/D on the DIRECT screen will display the
shooting menu (page 59).
• After setting the exposure compensation, press Fnꢀ, Fn2, or the
ADJ. lever (left or right) to move the cursor to other items.
• When in manual exposure mode, the exposure indicator to
achieve optical exposure will be displayed instead of the
exposure compensation slider.
• When in program shift mode, the value of shutter speed and
aperture will be changed at the same time to produce the same
exposure.
• The item name of shooting menu corresponding to the
selected item on the DIRECT screen will be displayed in the
information area.
Displaying the Next or Previous Page
If the items displayed on a screen extends over multiple pages,
you can display the next or previous page by pressing + or –, or
rotating the up-down dial while pressing the DIRECT button.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢅ.
Picture Display
The following indicators may be displayed during
shooting and playback.
Shooting (still photography)
Shooting (movie mode)
1
2
3
4
5 6 7
8
37 38
4:3
N
21
22
23
24
9
26
10
11
25cm-
20
12
13
15
16
17
18
19
32
25
F 2.5
1/50
29
200
27 28
30
31
33
34
35
36
F 2.5
1/50
200
1 Flashꢀmodeꢀ............ 28 9 Focusꢀmode/full
2 Flashꢀcompensation/
manualꢀflashꢀamount 10ꢀ Whiteꢀbalance/
18ꢀ Dateꢀimprintꢀ.......... 84
pressꢀsnapꢀ........64,ꢀ69
19ꢀ Batteryꢀlevelꢀ.......... 10
20ꢀ Autoexposureꢀlock
ꢀ............................ 136
21ꢀ Self-timerꢀ.............. 31
22ꢀ Macroꢀmodeꢀ.......... 27
23ꢀ Minimumꢀshooting
distanceꢀ............... 144
24ꢀ Digitalꢀzoomꢀratio
ꢀ.............................. 26
25ꢀ Zoomꢀbarꢀ............... 26
26ꢀ Intervalꢀshootingꢀ... 83
27ꢀ Exposureꢀindicator
ꢀ.............................. 50
ꢀ.........................78,ꢀ79
whiteꢀbalance
compensationꢀ...86,ꢀ89
3 Sceneꢀmodeꢀ........... 52
Continuousꢀ.............73
11ꢀ Exposureꢀmetering
4 Shootingꢀmodeꢀ........ 4
ꢀ.............................. 70
5 Numberꢀofꢀexposures 12ꢀ Imageꢀsettingsꢀ...... 71
remainingꢀ*ꢀ.......... 177
13ꢀ Bracketingꢀ............. 75
6 Destinationꢀ............ 15
7 Snapꢀfocusꢀdistance
ꢀ.........................64,ꢀ68
8 Pictureꢀquality/size
ꢀ.............................. 61
14ꢀ Histogramꢀ............. 44
15ꢀ Distortionꢀcorrection
ꢀ.............................. 81
16ꢀ Noiseꢀreductionꢀ..... 80
17ꢀ Cameraꢀshake
correctionꢀ.............. 92
28ꢀ Apertureꢀ.....46,ꢀ48,ꢀ50
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
29ꢀ Shutterꢀspeed
ꢀ...................46,ꢀ49,ꢀ50
30ꢀ Exposure
32ꢀ Tiltꢀindicatorꢀ.......... 32 36ꢀ Focusꢀbarꢀ............... 64
33ꢀ Exposure
warningꢀ................. 86
37ꢀ Movieꢀlengthꢀ..63,ꢀ177
38ꢀ Timeꢀavailableꢀ*ꢀ...... 55
compensationꢀ....... 85
34ꢀ Blurꢀwarningꢀ....24,ꢀ93
31ꢀ ISOꢀ......................... 90
35ꢀ Depthꢀofꢀfieldꢀ........ 64
* Approximation only; actual capacity varies with shooting conditions
and make of memory card. Display shows“9999”when memory remains
for over 9,999 images.
Note
The shooting settings can be viewed by pressing the DIRECT
button (page 5).
Playback (photographs)
Playback (movies)
1
2 3
4
5 6
7
8
4:3
N
15
16
2010/01/01 00:20
F
ISO 200 EV+0.7
2.5
1/50
2010/0101 00:20
9
17 18
10 11
12 13 14
1 Fileꢀnumberꢀ.............– 8 Pictureꢀquality/size
13ꢀ Shutterꢀspeed
ꢀ.............................. 61
ꢀ...................46,ꢀ49,ꢀ50
2 Currentꢀframeꢀ..........–
9 Dateꢀofꢀrecording
ꢀ.......................20,ꢀ149
10ꢀ Apertureꢀ.....46,ꢀ48,ꢀ50
14ꢀ Batteryꢀlevelꢀ.......... 10
15ꢀ Length/elapsedꢀtime
3 Totalꢀframesꢀ............–
4 Playbackꢀmode
indicatorꢀ..................–
ꢀ................................–
11ꢀ ISOꢀ......................... 90 16ꢀ Progressꢀindicatorꢀ....–
5 Protectedꢀimageꢀ.. 112
12ꢀ Exposure
compensationꢀ....... 85
17ꢀ Whiteꢀbalanceꢀ....... 86
18ꢀ Whiteꢀbalance
6 DPOFꢀprint
indicatorꢀ.............. 115
compensationꢀ.........89
7 Sourceꢀ................... 15
Download from Www.Somanuals.com. All Manuals Search And Download9.
Notes
• The picture display may also display warnings and messages.
• Additional information can be viewed
4:3
N
by pressing the DISP. button (page 42).
2.5
200
TheBatteryLevelIndicator
Battery level is shown by the icon at the bottom right
corner of the picture display.
Icon
Description
Battery fully charged.
(green)
(green)
(orange)
Battery partially discharged.
Low battery. Charge or replace as soon as possible.
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Photography and
Playback
Read this section before using your camera
for the first time.
First Steps................................................................ ꢀ2
Taking Photographs ................................................. 2ꢀ
Viewing and Deleting Photographs........................... ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢀ
First Steps
Prepare the camera for use.
Charging the Battery
The rechargeable battery (DB-90) supplied with the
camera body is not charged at the time of purchase.
Charge the battery in the supplied BJ-9 battery charger
before use.
Place the battery in the charger.
Place the battery label up with the “+”and “–”labels
oriented to match the labels on the charger.
1
Caution
Be sure the battery is in the correct orientation.
Connect the power cord to the charger, and then
plug in.
The charger lamp will light while the battery
charges. An exhausted battery will recharge in
about five hours at 25°C.
2
Note
If the charger lamp blinks, a battery or charger fault may
have occurred. Unplug the power cord and remove the
battery from the charger.
ꢀ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove the battery.
3
Charging is complete when the charger lamp turns
off. Unplug the power cord and remove the battery
from the charger.
Cautions
• Rechargeable Li-ion battery: Use only a genuine DB-90 battery. Do
not use a battey not specifically designated by Ricoh for use in
this camera body.
• The battery may be hot immediately after use. Before removing
the battery, turn the power off and wait for the battery to cool
down.
• Remove the battery if the camera will not be used for extended
periods.
Tip:BatteryCapacity
The number of shots that can be taken with a fully-charged
DB-90 battery differs depending on the camera unit. The tests
are conducted according to CIPA standards under the following
conditions: at the temperature of 23°C (73°F); with the picture
display on; shoot every 30 seconds with flash fired every other
shot; turn the camera off and on every 10 shots taken. See the
documentation provided with the camera unit for details.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢁ
Inserting the Battery
Be sure the power is off before inserting or removing the
battery.
1 Open the battery/card cover.
Unlatch (1) and open
(2) the cover.
1
Insert the battery.
Using the battery to keep
the battery latch pressed
2
2
downward, slide the
battery in. The latch will
click into place when the
battery is fully inserted.
3 Close the battery/card cover.
Close (1) and latch (2)
the cover.
2
Caution
Be sure the cover is latched.
1
RemovingtheBattery
Unlatch and open the battery/card cover, press the latch
downward to release it, and then remove the battery. Be
careful not to drop the battery.
Caution
If the camera will not be used for an extended period, remove
and store the battery in a cool dry place.
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Memory Cards
Pictures can be stored in the camera body’s 86MB
internal memory, or optional SD and SDHC memory
cards. Internal memory is used if no card is inserted; if a
card is inserted, the card will be used instead.
Be sure the power is off before inserting or removing a
memory card.
1 Open the battery/card cover.
Unlatch (1) and open (2)
the cover.
1
2
Insert the card.
Holding the memory card
in the orientation as shown,
slide it in until it clicks into
place.
2
3 Close the battery/card cover.
Close (1) and latch (2) the
cover.
2
1
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢃ
RemovingMemoryCards
Unlatch and open the battery/card cover, and then press
the memory card in to eject it. The card can then be
removed.
Cautions
• Pictures will not be saved to internal memory when a memory
card is inserted, even if the memory card is full.
• Keep the memory card contacts clean.
Tip:WriteProtection
Slide the write-protection switch on
memory card to“LOCK”to keep data
from being written to or deleted from
the card and to prevent the card from
being formatted.
Pictures cannot be taken when the memory card is locked; lock
the card only to prevent accidental loss of data and be sure to
unlock the card before shooting.
Notes
• Format memory cards before first use or after they have been
used in a computer or other device (page 139). Be sure to back
up any important data before formatting.
• See page 177 for information on memory card capacity.
• Pictures can be copied to memory cards from internal memory
(page 115).
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the Camera Unit to the Camera Body
Be sure the power is off before attaching or removing
the camera unit to/from the camera body.
Remove the connector caps
from the camera body and
camera unit respectively. Align
the left side of the camera unit
with the alignment mark on the
camera body, and then slide the
camera unit to the left until it
clicks.
Alignment mark for
attaching camera unit
Removing the Camera Unit from the Camera Body
Slide the camera unit
release lever to the right,
and remove the camera
unit.
Be careful not to drop the
camera body and camera
unit when removing the
camera unit from the
camera body.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢅ
Turning the Power On and Off
Shooting Mode
Slide the power switch to ON to
turn the camera on. The camera
will play the start-up sound. The
autofocus/flash lamp blinks for
several seconds while the camera
starts up.
To turn the camera off, slide the
power switch to OFF. The number
of pictures taken so far that day
will be displayed before the
camera turns off (zero is displayed
if the camera clock has not
been set; if you turn the camera off after changing the
clock (page 20), the camera will display the number of
pictures taken after the clock setting was changed).
Caution
Changes to continuous (page 73), interval (page 83), and self-
timer (page 31) settings are lost when the camera is turned
off. Turning the camera off restores settings for MY modes to
the values saved with Reg. My Settings. Other settings are
unaffected.
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Mode
When the power is off, pressing
the 6 button for about a second
turns the camera on in playback
mode. Press the 6 button again
to turn the power off.
Tip:SleepModeandAutoPowerOff
The camera will turn the display or power off automatically to
save power if no operations are performed for the specified time
in the Sleep Mode (page 141) and Auto Power Off (page 141).
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 9
Basic Setup
A language-selection dialog is displayed the first time
the camera is turned on. Follow the steps below to
choose a language and set the time and date. To exit
before setup is complete, press the DISP. button. The
language, time, and date can be changed at any time in
the setup menu (page 149).
Select a language.
1
Press +, –, Fnꢀ, or Fn2 to
highlight a language, and
press C/D.
Set the clock.
Press Fnꢀ or Fn2 to highlight
2
the year, month, day, hour,
minute, or date format, and
then press + or – to change.
After checking that the date
is correct, press C/D.
A confirmation dialog will be
displayed; press C/D
to set the clock.
Notes
• If you leave the battery in the camera body for at least two
hours, the clock and language settings are retained for about a
week after the battery was removed.
• The time and date of recording can be imprinted on
photographs (page 84).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Photographs
After setting up the camera
as described in “First Steps”
(page 12), you are ready to take
photographs. Slide the power
switch to ON to turn the camera
on, and rotate the mode dial to
5.
Holding the Camera
Hold the camera in both hands.
Hold the camera in both
hands with your elbows
lightly pressed against your
body.
1
Caution
Be sure that your fingers, hair or
the neck strap do not obstruct the
lens or flash.
Get ready to shoot.
2
Rest the finger on the
shutter-release button.
Download from Www.Somanuals.com. All Manuals Search And Download2. ꢀ
Taking a Photograph
Focus.
1
Frame your subject in the center of the picture
display and press the shutter-release button halfway
to set focus and exposure.
4:3 N
Autofocus/flash lamp
If the camera is able to focus, the
focus frames for the objects in
focus are displayed in green
(up to nine frames).
If the camera is unable to focus, the
focus frame blinks red and the
autofocus/flash lamp blinks
green.
Focus frame
Take a picture.
2
Gently press the shutter-release button the rest
of the way down to take the picture. The picture
is displayed immediately after shooting for a few
seconds (page 142), and saved to internal memory
or memory card.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip:Shutter-ReleaseButton
The camera has a two-stage shutter-release button. To focus,
lightly press the shutter-release button until you feel resistance.
This is called“pressing the shutter-release button halfway.”Press
the shutter-release button the rest of the way down to shoot.
Tip:Focus
The autofocus/flash lamp and the focus frame show whether the
subject is in focus.
Focus status
Before focusing
Subject in focus
Unable to focus
Focus frame
White
Autofocus/flash lamp
Off
Green
On (green)
Blinks (green)
Red (blinks)
The camera may be unable to focus on the following:
• Objects that lack contrast, such as the sky, a wall that is only one
color, or the hood of a car
• Flat objects containing only horizontal lines
• Fast-moving objects
• Objects that are poorly lit
• Objects with bright reflections or backlighting
• Flickering objects, such as fluorescent lights
• Point light sources, such as light bulbs, spotlights, or LEDs
Note that one or more focus frames may be displayed in green
even if the camera is unable to focus on the above subjects;
check focus in the picture display before shooting. If the camera
is unable to focus, lock focus on another object at the same
distance from the camera as your subject, then recompose the
photograph and take the picture (page 25).
Download from Www.Somanuals.com. All Manuals Search And Download2. ꢁ
Tip:AvoidingBlurredPictures
To prevent blurring caused by the camera movement when the
shutter is released (“camera shake”), press the shutter-release
button smoothly and gently. Blurring is particularly likely to occur
if:
• The flash is off and lighting is poor
• Using digital zoom (page 26)
In situations in which photographs are especially prone to
blurring caused by camera shake, a J icon will be displayed
in the picture display. Hold the camera steady and try focusing
again, or attempt one of the followings:
• Turning the flash on ( ) or using auto flash ( ; see page 28)
• Choosing a higher ISO (page 90)
• Using the self-timer (page 31)
• Using the camera shake correction (page 92)
Notes
• If the flash will fire when the picture is taken, a pre-flash will be
emitted to assist focus and exposure.
• In the case of overexposure or underexposure, a
be displayed.
icon will
• You can choose how long pictures are displayed in the picture
display after shooting. If desired, photographs can be displayed
until the shutter-release button is pressed halfway (page 142).
2ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus Lock
Use focus lock to compose photographs in which the
subject is not in the center of the frame. Focus lock can
also be used if the camera is unable to focus.
Focus.
1
Position your subject in the center of the picture
display and press the shutter-release button halfway
to focus.
4:3 N
Recompose the photograph.
Keeping the shutter-release button pressed halfway
to lock focus, recompose the photograph.
2
Final composition
Main subject
Take a picture.
Gently press the shutter-release button the rest of
the way down to take the picture.
3
Caution
If the distance between the camera and subject changes while
focus lock is in effect, focus again at the new distance.
Download from Www.Somanuals.com. All Manuals Search And Download2. ꢃ
Zoom
The 8 (telephoto) button can be used to zoom in and
the 9 (wide-angle) button to zoom out.
4:3 N
4:3 N
9 8
Zoom Zoom
out
in
1 Frame the picture using the 8 and 9 buttons.
Focus.
Press the shutter-release
button halfway.
2
Take a picture.
3
Gently press the shutter-
release button the rest of the
way down.
Notes
• If using the camera unit without optical zoom, digital zoom
works instead of optical zoom.
• If using a camera unit equipped with optical and digital zoom,
to switch from optical zoom to digital zoom, release the 8
button once at the maximum magnification by the optical
zoom, and then press the 8 button again. To switch from
digital zoom to optical zoom, press and hold the 9 button.
• You can check the amount of optical zoom with the zoom bar
in the picture display. When using the digital zoom, the zoom
ratio is displayed in the picture display.
• When RAW is selected for Picture Quality/Size (page 61),
digital zoom cannot be used.
2ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Close-ups (Macro Mode)
Use macro mode for close-ups of small objects.
Press the N button.
1
A N icon will be briefly
displayed in the center of
the picture display. N will
then appear at the upper
left of the display.
Focus.
Frame the subject in the
picture display and press
the shutter-release button
halfway.
2
4:3
N
3 Take a picture.
Gently press the shutter-release button the rest of
the way down.
To exit macro mode, press the N button again.
Note
Even if Multi AF, Snap, ∞ is selected for Focus, Spot AF is used
in macro mode (page 64).
Download from Www.Somanuals.com. All Manuals Search And Download2. ꢅ
Flash Photography
The flash only fires when it is raised. Press the OPEN/f
button to raise the flash, and press the button again to
choose from the following flash modes:
Mode
Description
Flash Off The flash is off.
Auto
The flash fires automatically when required.
Red-Eye
Flash
Reduces “red-eye”in portraits taken with the flash.
Flash On The flash fires with every shot.
Combines the flash with slow shutter speeds. Use when
Flash
taking portraits that include details of the background or
Synchro. nightscape. Use of a tripod is recommended to prevent
blur.
Manual The flash fires with every shot. The amount of flash can
Flash
be set in Manual Flash Amount (page 79).
Note
The effective range of the flash differs depending on the camera
unit. See the documentation provided with the camera unit for
details.
2ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Built-in Flash
Raise the flash.
1
Press the OPEN/f button.
OPEN
Select a flash mode.
2
Press the OPEN/f button to select a flash mode. The
flash mode icon appears at the top left corner of the
display.
Notes
• The selected flash mode remains in effect until a new
mode is chosen.
• The autofocus/flash lamp blinks while the flash charges.
Photographs can be taken when the lamp stops blinking.
Focus and shoot.
If the flash will fire when the picture is taken, a pre-
flash will be emitted to assist focus and exposure.
3
Download from Www.Somanuals.com. All Manuals Search And Download2. 9
Notes
• To close the flash when it is not in use, gently press the center of
the flash cover down until it latches.
• The flash turns off automatically in movie, continuous, and
bracketing modes.
• Do not use the built-in flash when an optional flash is attached.
Failure to observe this precaution could cause damage to the
product.
Caution
Do not use the flash unit in close proximity to your subject’s eyes.
Particular care should be observed when photographing infants.
Do not direct the flash at the operator of a motor vehicle.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-Timer
Choose from ten-second, two-second, and custom
setting timers. Use the two-second timer to prevent blur
caused by camera movement when the shutter-release
button is pressed. With the custom setting, a specified
number of pictures can be taken at a specified interval.
Set the shooting interval and number of pictures with
Custom Self-Timer in the shooting menu (page 82).
Choose a self-timer mode.
1
4:3
N
Press the t button once to
select the ten-second timer,
twice to select the two-
second timer, and three times
to select the custom setting
timer. Pressing the button the
fourth time turns the timer off.
The current selection is displayed in the picture
display.
Note
The selected self-timer mode remains in effect until a new
mode is chosen.
Start the timer.
2
Press the shutter-release button to lock focus and
start the timer. If the ten-second timer or custom
setting timer is selected, the AF auxiliary light will
light.
Note
Press C/D to cancel the custom setting timer during
shooting.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢁ. ꢀ
Tilt Indicator
Use the tilt indicator to level the camera when
photographing buildings or landscapes. It is particularly
useful for compositions in which the horizon is visible.
Display options.
Press and hold the O (DISP.)
button until level setting
options are displayed.
1
Select an option.
Press + or – to highlight an option, and press
C/D to select the highlighted option.
2
Option
Off
Description
Tilt indicator is not displayed.
Tilt indicator is shown in the picture display. The amount
and direction of tilt can be checked in the tilt indicator.
The indicator turns green when the camera is level, orange
when the camera is tilted, and red if the degree of tilt
exceeds the maximum degree that can be displayed with
the indicator. Tilt indicator is not shown if the display is
off, indicators are hidden, or the framing grid is displayed
(page 42).
Display
Disp + Same as Display, except that a beep sounds periodically
Snd
when the camera is level.
A beep sounds periodically when the camera is level. The
tilt indicator is not displayed in the picture display.
Sound
ꢁ2
Download from Www.Somanuals.com. All Manuals Search And Download.
UnderstandingtheTiltIndicator
4:3 N
4:3 N
Green
Orange
Camera level
Camera tilted left
4:3 N
Red
Camera tilted too far to the
right
Camera tilted 90 ° left
Note
Tilt indicator settings can also be adjusted in the setup menu
(page 144).
Cautions
• The tilt indicator is not displayed when the camera is upside
down, movies are being recorded, or the interval timer is on.
• The beep does not sound if the camera’s volume is set off (page
142).
• The tilt indicator is intended as a guide only and should not
be used as a spirit level or in other applications in which a
high degree of precision is required. Accuracy drops when the
camera is in motion or you are shooting on a vehicle or other
moving platform.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢁ. ꢁ
Viewing and Deleting Photographs
Pictures can be viewed in the picture display.
Viewing Photographs
Press the 6 button in shooting
mode to display the last
photograph viewed.
Press the 6 button again to exit
to shooting mode.
Tip:IftheCameraIsOff
If the power is off, press the 6 button
for about a second to turn the camera
on in playback mode.
Press Fn2 to view photographs in the recorded order, Fnꢀ
to view in reverse order. Press – to skip ten frames ahead,
+ to go back ten frames.
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
4:3
4:3
4:3
N
N
N
Back ten photos
F
2.5
200
2010
2010
2010
Back one photo
+
4:3
N
4:3
N
Fnꢀ
Fn2
F
2.5
200
F
2.5
200
F
2.5
200
2010
2010
–
Ahead one photo
Ahead ten photos
F
2.5
200
Caution
The camera records JPEG copies of RAW images for display in the
picture display. When a RAW image is selected for playback, the
camera shows the JPEG copy and a RAW indicator is displayed.
If the JPEG copy has been deleted using a computer or other
device, the camera will display a small preview of the RAW
image, but you will not be able to view the image at larger
magnifications. See pages 62, 63 for information on recording
RAW images.
Tip:ViewingPicturesinShootingMode
Photographs are displayed in the picture display immediately
after shooting. You can choose how long pictures are displayed
using LCD Confirmation Time in the setup tab (page 142).
Download from Www.Somanuals.com. All Manuals Search And Downloadꢁ. ꢃ
Tip:ViewingthePicturesinInternalMemory
If a memory card is inserted, the pictures on the memory card
will be displayed; the pictures in internal memory cannot be
viewed even if the memory card is empty. The pictures in internal
memory will only be displayed if no card is inserted in the camera
body.
Tip:AutoRotate
If On is selected for Auto Rotate in the setup tab (page 143),
pictures will be automatically displayed in the correct orientation
in the picture display.
Viewing Multiple Photographs
Press the z or Z button
to choose the number of
photographs to display from one,
20, and 81, or to choose to sort
photographs by the date that
photographs were taken.
Single frame
20 frames
Last File
4:3
N
4:3
N
F
2.5
200
2010
2010
F
2.5
Sort by date
81 frames
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-frame views can be used to select images for
display or deletion.
In multi-frame views, use the directional pad to highlight
photographs.
Tip:DirectionalPad
The cursor can be moved in an oblique direction by pressing the
diagonal portions on the directional pad.
Notes
• To display a photograph full frame, press the ADJ. lever in multi-
frame view.
• To display the photographs on the previous or next page in the
multi-frame view:
• In the 20- and 81-frame view, press +, –, Fnꢀ, Fn2, or ADJ. lever
(left or right), or rotating the up-down dial while pressing the
DIRECT button.
• In the sort by date view, pressing + or –, or rotating the up-
down dial while pressing the DIRECT button displays the next or
previous page. Pressing Fnꢀ, Fn2, or ADJ. lever (left or right) while
pressing the DIRECT button displays the photographs taken
next or previous date. If pressing Fn2, or ADJ. lever to the right
with the cursor at the last photograph, the photographs taken
the next date is displayed.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢁ. ꢅ
Playback Zoom
Press the z button or rotate the up-down dial to the
right to zoom in on the photograph currently displayed
full frame. To zoom in to the magnification selected with
One Press Zoom Ratio (page 143), press the ADJ. lever.
The following operations can be performed:
Use
To
Zoom in.
z
Up-down
dial
Rotate right to zoom in, left to zoom out.
When an image is magnified, press to display the image
in the magnification ratio selected for One Press Zoom
Ratio. If an image is displayed at the magnification
selected for One Press Zoom Ratio, pressing C/D
cancels zoom.
C/D
Directional pad Move the areas to be displayed.
ADJ. lever Press left or right to view other images at same zoom ratio.
Zoom out.
Z
Notes
• Maximum magnification varies with image size:
Image size
Maximum magnification
L, M, 5M, 3M
1M
16×
6.7×
3.4×
VGA
• Playback zoom is not available with movies or pictures taken
using M-Cont Plus.
• If Setting2 is selected for Playback Mode Dial Options in the
key custom options tab (page 138), the ADJ. lever and up-down
dial can be used to view other areas of the image.
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Photographs
Follow the steps below to delete photographs.
Deleting Individual Photographs
Display a photograph.
Display a photograph you want to delete in single-
frame playback (page 34).
1
Press the d button.
2
The options will be displayed
(you can change the
photograph by pressing Fnꢀ
or Fn2).
Select Delete One.
Press + or – to highlight Delete One, and press
C/D.
3
A message is displayed during deletion. Repeat
steps 2 and 3 to delete additional photographs, or
highlight Cancel and press C/D to exit.
Deleting All Files
To delete all files, press the d
button to display delete options
as described above, and select
Delete All. A confirmation dialog
will be displayed; press Fnꢀ or
Fn2 to highlight Yes, and press
C/D.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢁ. 9
Deleting Multiple Files
Follow the steps below to delete multiple files.
Press the d button.
1
In multi-frame playback,
proceed to step 2. In single-
frame playback, the options
shown at right will be
displayed. Highlight Delete
Multi and press C/D.
Select Sel. Indiv. or Sel. Range.
To select images one at a
time, highlight Sel. Indiv.,
2
press C/D, and
proceed to step 3. To select
images by specifying ranges,
highlight Sel. Range, press
C/D, and proceed to step 3.1. Press the DISP.
button to exit at any time without deleting files.
Select a photograph.
Use the directional pad
(page 37) to highlight
3
4:3
N
photographs, and press
C/D. Selected picture
is marked with a d icon.
To deselect a photograph,
highlight it and press C/D again.
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip:SelectingRanges
To switch from Sel. Indiv. to Sel. Range, press the ADJ. lever
and follow the steps below:
4:3
N
3.1 Use the directional pad to
highlight the first image of a
range, and press C/D
to select. The selected image
is marked with a d icon. To
deselect the image, press the
DISP. button.
4:3
N
3.2 Use the directional pad to
highlight the last image, and
press C/D to select.
The selected images are
marked with a d icon.
Repeat steps 3.1–3.2 to select additional ranges, or press the
ADJ. lever to return to step 3 to select or deselect individual
photographs.
Press the d button.
A confirmation dialog will be
displayed.
4
5
Select Yes.
Press Fnꢀ or Fn2 to highlight
Yes, and press C/D.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢂ. ꢀ
O (DISP.) Button
Press the O (DISP.) button to display the information in
the picture display in shooting and playback modes.
TurningthePictureDisplayOn/Off
Pressing the VF/LCD button while the picture display is on turns
the picture display off. Some camera operations are not available
when the picture display is off. Pressing the VF/LCD button again
turns the picture display on.
When a LCD viewfinder is attached, pressing the VF/LCD button
switches between the LCD viewfinder and the picture display.
Shooting Mode
Press the O (DISP.) button to cycle through the
following displays:
4:3
N
4:3
N
Indicators
displayed
Indicators +
histogram
Framing
grid (no
No
indicators
indicators)
Tip:TheFramingGrid
See page 144 on choosing a type of framing grid.
ꢂ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
If Display or Disp + Snd is selected for Level Setting (page 32), a
tilt indicator appears when indicators are displayed.
Playback Mode
Press the O (DISP.) button to cycle through the
following displays:
4:3
N
4:3 N
Indicators
displayed
Details +
histogram
2.5
200
F
2.5
200
2010
2010
4:3
N
No
indicators
White Saturation
2010
F
2.5
200
Highlights
Tip:Highlights
The flashing portions of the highlights display indicate“washed
out”areas in which details may have been lost to overexposure.
Check images with the highlights display after shooting in direct
sunlight or in other conditions in which parts of the image may
be overexposed. If it seems important details may have been lost,
choose a lower exposure compensation value and shoot again
(page 85). Note that the display is intended only as a guide and
may not be entirely accurate.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢂ. ꢁ
Tip:Histogram
The histogram is a graph showing the distribution of pixels
of different brightness in the image. Brightness is plotted on
the horizontal axis, with shadows at the left and highlights
at the right. The vertical axis gives the number of pixels. The
histogram can be used to assess exposure and check for loss of
detail in highlights and shadows without the brightness of your
surroundings affecting your judgement. A histogram in which
pixels are clustered on the right indicates that the image may be
overexposed, while a histogram in which pixels are clustered on
the left indicates that the image may be underexposed.
Overexposed
Underexposed
If the image appears to be incorrectly exposed, you may be
able to use exposure compensation to correct exposure in
subsequent photographs of the same subject (page 85; note
that exposure compensation may be insufficient to produce the
correct exposure in some cases). The histogram can also be used
as a guide when adjusting contrast in photographs after shooting
(page 107).
The histogram is intended as a guide only and may not be
completely accurate, particularly in cases in which the flash is
used or ambient lighting is poor.
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Read this section for more information on
camera functions.
More on Photography............................................... ꢂꢄ
Playback Functions................................................... 9ꢂ
Playback Menu........................................................ꢀ0ꢀ
Printing Photographs..............................................ꢀ20
Camera Settings......................................................ꢀ2ꢄ
Copying Pictures to a Computer ...............................ꢀꢃꢀ
Technical Notes .......................................................ꢀꢄꢅ
Download from Www.Somanuals.com. All Manuals Search And Downloadꢂ. ꢃ
More on Photography
This section provides information on P, A, S, M, 4,
and MY modes and on using shooting menu options.
Mode P: Program Shift
When the mode dial is rotated
to P (program shift), you can use
the up-down dial to choose from
several combinations of shutter
speed and aperture, all of which
produced the same exposure.
Choose mode P.
Rotate the mode dial to P. The
shooting mode is shown by
an icon in the picture display.
1
4:3 N
Measure exposure.
2
Press the shutter-release
button halfway to measure
exposure. The current shutter
speed and aperture appear in
the display.
2.5
200
Choose shutter speed and aperture.
Release the shutter-release
button and rotate the
3
4:3 N
up-down dial to select a
combination of shutter speed
and aperture.
ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Shutter speed and aperture can be adjusted for ten seconds
after releasing the shutter-release button.
Take a picture.
Gently press the shutter-release button all the way
down to take the photograph.
4
Note
The combinations of shutter speed and aperture available at each
exposure value differ depending on the camera unit. See the
documentation provided with the camera unit for details.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢂ. ꢅ
Mode A: Aperture Priority
In mode A (aperture priority),
you choose the aperture and
the camera selects the shutter
speed. Choose large apertures
(low f-numbers) to emphasize the
main subject by blurring background and foreground
details. Choose small apertures (high f-numbers) to
bring both the background and main subject into focus.
Choose mode A.
1
4:3
N
Rotate the mode dial to
A. The current aperture is
displayed in orange.
Choose an aperture.
Rotate the up-down dial to
choose an aperture. Your
selection only takes effect when the photograph is
taken; the effect cannot be previewed in the picture
display.
2
3
4
Press the shutter-release button halfway.
Press the shutter-release
button halfway to set focus and
exposure. The shutter speed
selected by the camera will be
displayed in the picture display.
Take a picture.
Gently press the shutter-release button the rest of
the way down.
Note
If auto aperture shift is on (page 92), the camera will adjust
aperture for optimal exposure.
ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode S: Shutter Priority
In mode S (shutter priority), you
choose the shutter speed and
the camera selects the aperture.
Choose fast shutter speeds to
“freeze”motion, slow shutter
speeds to emphasize motion by blurring moving
objects.
Choose mode S.
1
4:3
N
Rotate the mode dial to S.
The current shutter speed is
displayed in orange.
Choose shutter speed.
2
Rotate the up-down dial to
choose a shutter speed.
Press the shutter-release button halfway.
Press the shutter-release
button halfway to set focus
and exposure. The aperture
3
selected by the camera will
2.5
200
be displayed in the picture
display.
Take a picture.
Gently press the shutter-release button the rest of
the way down to shoot.
4
Note
Maximum aperture (i.e., the lowest possible f-number) may not
be selected at slow shutter speeds, even when the subject is
poorly lit.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢂ. 9
Mode M: Manual Exposure
In mode M (manual exposure),
use the up-down dial to choose
aperture and the ADJ. lever to
select a shutter speed.
Choose mode M.
1
Rotate the mode dial to M.
The shooting mode, exposure
indicator, and current
4:3
N
aperture and shutter speed
appear in the display.
Choose an aperture and shutter speed.
Rotate the up-down dial
to choose an aperture and
2
–2 EV
+2 EV
press the ADJ. lever left or
right to select a shutter
speed (if desired, the roles of the two controls
can be reversed; see page 138). The effects can be
previewed in the picture display and are reflected
in the exposure indicator (if the image would be
under- or over-exposed by more than 2EV, the
effects cannot be previewed and the indicator turns
orange).
Take a picture.
3
Press the shutter-release button halfway to focus,
and then gently press the shutter-release button the
rest of the way down to shoot.
ꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• The shutter speeds that can be set depend on the camera unit
and the aperture setting. See the documentation provided with
the camera unit for details.
• If Auto or Auto-Hi is selected for ISO Setting (page 90),
ISO value will be fixed in manual exposure mode. The fixed
value for ISO differs depending on the camera unit. See the
documentation provided with the camera unit for details.
• Choose slower shutter speeds for longer exposure times.
To reduce blur caused by camera shake, hold the camera
steadily in both hands or use a tripod. The picture display
turns off while the shutter is open. At slow shutter speed, the
camera automatically processes photographs to remove noise,
increasing the time needed to record images to about twice the
shutter speed.
• Autoexposure (AE) lock is not available in manual exposure
mode. If AE Lock is selected for Set Fnꢀ Button or Set Fn2 Button in
the key custom options tab, pressing the assigned button in
manual exposure mode will set shutter speed or aperture to
a value close to that needed for optimal exposure. Similarly, if
Exposure Comp. is selected for +/– Button Settings (page 137)
in the key custom options tab, pressing the + and – buttons
will not display exposure compensation options in manual
exposure mode, but will instead set shutter speed or aperture to
a value close to that needed for optimal exposure. This is useful
when you want to use optimal exposure as a starting point for
modifying exposure. The One Press M Mode (page 138) option
in the key custom options tab determines whether shutter
speed or aperture is altered to achieve optimal exposure.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢃ. ꢀ
4 Mode: Settings for Various Scenes
Select 4 mode to shoot
movies or to choose one of the
options that are suitable for
particular scenes. Camera settings
are automatically optimized for
the selected subject type.
The following is some of the options that can be
selected in the 4 mode.
Option
Movie
Description
Shoot movies with sound (page 54).
Portrait
Sports
Use when taking portrait pictures.
Use when taking pictures of moving objects.
Use when taking scenery pictures with abundant
greenery or blue sky.
Landscape
Use when shooting night scenes.
In nightscape mode, the flash fires when all of the
following conditions are satisfied:
Nightscape • The flash is set to Auto.
• The flash is determined to be necessary because it is
dark.
• There is a figure or another object nearby.
Reducetheeffectsofperspectivewhenphotographing
rectangular objects, such as message boards or
business cards (page 56).
Skew Correct
Mode
ꢃ2
Download from Www.Somanuals.com. All Manuals Search And Download.
To select a scene mode option:
Rotate the mode dial to 4.
The option currently selected
for 4 mode appears in
1
the display.
Press C/D.
2
A menu for scene mode is
displayed.
Select an option.
Press +, –, Fnꢀ or Fn2 to highlight an option and press
C/D to return to shooting mode with the
3
selected option shown at the top of the display.
Take a picture.
• Movie mode: See page 54.
• Skew correct mode: See page 56.
4
Download from Www.Somanuals.com. All Manuals Search And Downloadꢃ. ꢁ
Tip:UsingtheMenus
To access the shooting, key custom
options and setup menus in 4
mode, press C/D to display the
scene mode menu and press Fnꢀ to
highlight the mode tab. Press + or – to
highlight the shooting menu tab (page
58), key custom options tab (page
127), or setup tab (page 128), and press
Fn2 to place the cursor in the selected
menu. See page 59 for information on
the shooting menu options available in
each mode.
1
2
3
4
Mode tab
1
2
3
Shooting menu tab
Key custom options
tab
Setup tab
4
Recording Movies
Shoot movies with sound. Movies are stored as AVI files.
Select 3 in 4 mode.
Press + or – to highlight 3 (movie), and press
C/D.
1
The mode is shown by an
icon in the picture display.
Shoot.
2
Press the shutter-release button to begin recording;
press again to end. Recording ends automatically
when memory is full.
ꢃꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions
icon blinks, and the recording time and remaining
• A
available time are displayed during recording.
• Sounds made by the camera may be recorded with the movie.
• Movies may be up to 90 minutes in length or 4GB in size.
Depending on the type of memory card used, shooting may
end before this length or size is reached. The maximum total
length of all movie files that can be stored in internal memory
or on a memory card varies with the options selected for Movie
Size (page 61).
Notes
• The flash cannot be used in movie mode.
• The camera focuses when the shutter-release button is pressed
to begin recording.
• The amount of time remaining is calculated based on the
amount of memory available and may not diminish at an even
rate.
• Shooting menu options differ from those available in other
modes (page 60).
• Charge the battery before shooting. For long recordings, choose
memory cards with high write speeds and check the amount of
memory available before shooting.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢃ. ꢃ
4 Mode: Skew Correct
To take pictures in skew correct mode, frame the subject
so that it occupies as much of the frame as possible and
press the shutter-release button to take the photograph.
If the camera detects an object of which perspective
can be corrected, the object is shown surrounded by an
orange frame. The camera can detect up to five objects;
press Fn2 to select a different object, or press + to record
the photograph without correcting perspective. If the
camera is unable to detect a suitable object, an error
message will be displayed and the photograph will be
recorded without modification.
Caution
The camera records two images: the unmodified photograph
and a copy that has been processed to correct perspective. No
photograph will be taken if memory is insufficient to record two
images. The camera may be unable to correct perspective if:
• The subject is out of focus.
• The four edges of the subject are not clearly visible.
• There is little contrast between the subject and the background.
• The background contains many fine details.
Tip:SkewCorrection
The Skew Correction in the playback menu can be used to
correct perspective of saved photographs (page 110).
ꢃꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
“MY” Modes: Using Custom Settings
To take photographs using
settings saved in MY1 option
with Reg. My Settings in the key
custom options tab (page 129),
rotate the mode dial to MYꢀ. Select
MY2 to take photographs using the settings saved with
MY2, MYꢁ to take photographs using the settings saved
with MY3.
Rotate the mode dial to MYꢀ, MY2, or MYꢁ.
1
4:3
N
The shooting mode saved
using Reg. My Settings will
be displayed in the picture
display.
Note
Settings can be adjusted in MY modes. The settings saved
with Reg. My Settings are restored when another mode is
selected or the camera is turned off.
Tip:ChoosingaShootingMode
To choose a shooting mode in MY mode without changing
other settings, use the Switch Shooting Mode option in
the shooting menu (page 92). Switch Shooting Mode is
not available for MY modes that a scene mode is assigned
to.
Take a picture.
See the section on the selected shooting mode for
more information.
2
Download from Www.Somanuals.com. All Manuals Search And Downloadꢃ. ꢅ
Shooting Menu
Use the +, –, Fnꢀ, Fn2, and C/D buttons to
navigate the menus.
Caution
The shooting menu is not displayed when the camera unit is not
attached to the camera body.
Display the shooting menu.
1
In modes other than 4,
pressing C/D in
shooting mode displays the
shooting menu.
Tip:4Mode
In 4 mode, pressing
C/D displays the mode
menu; press Fnꢀ to highlight the
mode tab, press – to display the
shooting menu, and Fn2 to place
the cursor in the menu.
Scroll bar shows
position in menu
Select a menu item.
2
Press + or – to highlight a
menu item and press Fn2
to display options for the
highlighted item.
Note
The items on the next page can
be displayed by pressing – while
pressing the DIRECT button.
ꢃꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Select an option.
3
Press + or – to highlight an option. Press C/
D to select and exit to shooting mode, or press Fnꢀ
to select and return to the shooting menu.
The items available in the shooting menu differ
depending on the shooting mode.
5, P, A, S, M, MYꢀ, MY2 andMYꢁ Modes
Option
Picture Quality/Size
Focus
Default Page
Lꢀ4:3ꢀN 61
MultiꢀAF 64
Option
Default Page
Off 81
2Pics,ꢀ5Sec. 82
Auto Macro
Custom Self-Timer
Interval Shooting
Date Imprint
Snap Focus Distance
Full Press Snap
Pre-AF
2.5ꢀm
On
68
69
70
70
—
Off
83
84
Off
Exposure
0.0
85
Compensation *1
Exposure Metering
Image Settings
Continuous Mode
Auto Bracket
Multi
White Balance
Multi-PꢀAUTO 86
Standard 71
White Balance
Compensation
Off
Off
73
75
A:ꢀ0,ꢀG:ꢀ0 89
ISO Setting
Auto
—
90
91
92
Flash Exposure
Compensation
0.0
78
79
Restore Defaults *2
Auto Aperture Shift *3
Off
Manual Flash Amount
1/2
Switch Shooting
Mode *4
Flash Synchro Settings 1stꢀCurtain 79
—
On
92
92
Noise Reduction
Off
OverꢀISOꢀ401 80
Off 81
80
Camera Shake
Correction *5
Noise Reduction ISO
Distortion Correction
Download from Www.Somanuals.com. All Manuals Search And Downloadꢃ. 9
4Mode:Movie
Option
Default Page
VGA640 61
MultiꢀAF 64
Option
Default Page
Auto 86
Movie Size
White Balance
Focus
White Balance
Compensation
A:ꢀ0,ꢀG:ꢀ0 89
Snap Focus Distance
Pre-AF
2.5ꢀm
Off
68
70
4Mode:Portrait/Sports/Nightscape
Option
Picture Quality/Size
Focus
Default Page
Lꢀ4:3ꢀN 61 Distortion Correction
MultiꢀAF 64 Custom Self-Timer
Option
Default Page
Off
81
2Pics,ꢀ5Sec. 82
Snap Focus Distance
Full Press Snap
Pre-AF
2.5ꢀm
On
68 Date Imprint
Off
0.0
84
85
69 Exposure Compensation
70 White Balance
Off
Multi-PꢀAUTO 86
Flash Exposure
Compensation
Camera Shake
78
0.0
On 92
Correction *5
Flash Synchro Settings 1stꢀCurtain 79
4Mode:Landscape
Option
Default Page
Option
Default Page
Picture Quality/Size
Distortion Correction
Custom Self-Timer
Date Imprint
Lꢀ4:3ꢀN
Off
61 White Balance
Multi-Pꢀ
86
AUTO
81
Camera Shake
2Pics,ꢀ5Sec. 82
On
92
Correction *5
Off
0.0
84
85
Exposure Compensation
ꢄ0
Download from Www.Somanuals.com. All Manuals Search And Download.
4Mode:SkewCorrect
Option
Picture Quality/Size
Focus
Default Page
Option
Default Page
1Mꢀ4:3ꢀF 61 Flash Synchro Settings 1stꢀCurtain 79
MultiꢀAF 64 Distortion Correction
Off
Off
0.0
81
84
85
Snap Focus Distance
Full Press Snap
Pre-AF
2.5ꢀm
On
68 Date Imprint
69 Exposure Compensation
70 White Balance
70 ISO Setting
Off
Multi-PꢀAUTO 86
Exposure Metering
Image Settings
Multi
Auto
90
Standard 71 Camera Shake
On
92
Correction *5
Flash Exposure
Compensation
0.0
78
*1NotꢀavailableꢀinꢀmodeꢀM.
*25ꢀmodeꢀonly.
*4ModeꢀMYꢀ,ꢀMY2ꢀorꢀMYꢁꢀonly.
*5Thisꢀfunctionꢀisꢀnotꢀavailableꢀdependingꢀonꢀ
*3ModeꢀAꢀonly.
theꢀtypeꢀofꢀcameraꢀunit.
Picture Quality/Size / Movie Size
Image size determines the number of photographs and
movies that can be stored in internal memory or on a
memory card.
For still images, the aspect ratio and picture quality
can be selected for each option. The picture size differs
depending on the combination of the selected option,
aspect ratio and quality.
For movies, select the desired option.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢄ. ꢀ
ForStillImages
Option
Aspect ratio Compression rate
Description
RAW
16:9*2, 4:3, FINE/NORMAL/ • Suitable for further image
3:2*2, 1:1*3 VGA*1
processing or editing on a
computer.
L
16:9*2, 4:3, FINE/NORMAL • Suitable for printing at
3:2*2, 1:1*3
larger size or cropping the
image on a computer.
M
16:9*2, 4:3, FINE/NORMAL
3:2*2, 1:1*3
5M
4:3
4:3
4:3
FINE
FINE
FINE
• Suitable for printing.
3M
1M*4
• Suitable for taking large
number of photographs.
VGA*4
4:3
FINE
• Suitable for taking large
number of photographs,
attaching the images to
e-mail or posting images
on the web.
*1The setting is applied for the JPEG copy.
*2The upper and lower parts on the display are blacked out.
*3The left and right sides on the display are blacked out.
*41M and VGA are the options available in the Skew Correct mode.
Notes
• See the documentation provided with the camera unit for
details on the picture size for each option.
• Options for Picture Quality/Size can be displayed by pressing
the ADJ. lever (page 134).
ꢄ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip:PictureQuality
The camera supports the following picture qualities:
• Normal: JPEG compression is used to reduce file size.
• Fine: Compression rate is low to achieve high picture quality. File
size becomes larger comparing to Normal quality.
• RAW: RAW image data are saved in DNG format; JPEG copies
are also created. The camera displays only the JPEG copy;
DNG files can be viewed and edited on a computer using the
supplied Irodio Photo & Video Studio Software (Windows only)
or commercially-available applications that support the DNG
format.
Unlike normal- and fine-quality images, RAW images are not
compressed. This increases file size but avoids the loss of quality
associated with JPEG compression. Note the following when
shooting RAW images:
• Some functions of the shooting menu are not available for
shooting RAW images. See the description of each setting for
details. Image Settings and Date Imprint options apply only
to JPEG copies and have no effect on the DNG files.
• The number of RAW photographs that can be taken in a single
burst in continuous mode differs depending on the camera unit
and the settings of shooting menu.
ForMovies
Option
Image size
640×480
320×240
VGA640
QVGA320
Notes
• The options for movies differ depending on the camera unit.
See the documentation provided with the camera unit for
details.
• Movies may be up to 90 minutes in length or 4 GB in size.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢄ. ꢁ
Focus
Choose how the camera focuses. By default, the camera
uses autofocus.
Option
Description
The camera selects the focus area with the closest
subject, preventing out-of-focus shots by keeping
the camera from focusing on the background.
Multi AF*
Spot AF*
Focus on the subject in the center of the frame.
Focus manually (page 65).
MF
(manualꢀfocus)
Focus is fixed at distance selected with Snap Focus
Distance (page 68) for quick shutter response.
Snap
Fix the focus distance at infinity when photographing
distant scenes.
∞ (infinity)
* The icon is displayed on the DIRECT screen only.
4:3
N
When MF, Snap, or ∞ is selected,
the current selection is shown by
an icon in the picture display.
Tip:DepthofField
Depth of field is the portion (range of distance) that appears sharp
in an image. Small apertures (high f-numbers) increase depth of
field, bringing more of the scene into focus; large apertures (low
f-numbers) decrease depth of field, emphasizing the main subject
by blurring the foreground and background. At settings of MF,
Focus bar
(distances are
approximate)
Snap, and ∞, the focus bar shows depth
of field in shooting modes M, A, and P
(in mode P, depth of field is only shown
when the shutter-release button is
pressed halfway and aperture values are
displayed).
Depth of field
(green)
ꢄꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• Fnꢀ and Fn2 buttons can be used to switch back and forth
between autofocus and manual or snap focus (page 136).
• To zoom in on the subject in the
center of the picture display and
check focus, press and hold C/
D. Press and hold the button again
to return to the normal shooting
display.
4:3
N
2.5
30
Focus:MF(ManualFocus)
Manual focus can be used to lock focus or to focus when
the camera is unable to focus using autofocus.
Select MF (manual focus) in the Focus menu.
1
4:3
N
The focus mode and focus
bar are displayed in the
picture display.
2.5
30
Choose the focus distance.
While pressing the N button, rotate the up-down
dial to focus. When using the camera unit with the
focus ring, adjust the focus using the ring.
2
3
Take a picture.
See the section on the selected shooting mode for
more information.
Note
In manual focus mode, the camera can focus on the subject at
close range (macro) even if macro mode is not set.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢄ. ꢃ
ChoosingtheFocusandMeteringTarget
Target selection can be used to set focus and exposure
for off-center subjects without moving the camera,
making it easier to use a tripod.
Activate target selection.
1
Press the ADJ. lever in the
focus modes other than MF,
and then press the lever to
the left or right to highlight
P. Press + or – to highlight
one of the following options
and press C/D to select.
Option
Description
Spot metering and spot autofocus; choose the focus and
exposure target.
AE/AF
Spot autofocus; choose the focus target. Exposure is
AF metered using the option selected for Exposure Metering
(page 70).
Spot metering; choose the metering target. Focus is set
using the option selected for Focus (page 64).
AE
Off Target selection is off.
Position the target.
2
Use the directional pad
(page 37) to position the
cross hairs over your subject,
and press C/D.
To return to the target
selection menu, press the
DISP. button.
ꢄꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Take a picture.
3
Press the shutter-release button halfway to set focus
and/or exposure for the selected subject and then
gently press the shutter-release button the rest of
the way down to take the picture.
Notes
• Target selection is not available in manual focus mode (page
65).
• The selected target remains in effect until a new target is
selected. Note that target will be reset if you choose a new
option in the target-selection menu or select manual focus.
• When macro mode is on in 4 mode, the focus target
for macro mode can be selected by pressing the ADJ. lever,
selecting U, and using the directional pad to position the
cross-hairs as described on page 68.
• The Fn buttons can be used for focus target selection in macro
mode (page 68). Note that if the Fn buttons have been used to
select the focus target, the ADJ. lever cannot be used for target
selection until the target is reset.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢄ. ꢅ
MacroTargetSelection
If Macro Target is assigned to the Fnꢀ
or Fn2 button (page 136), you can select
macro mode by pressing the assigned
button in shooting mode. The cross-
hairs shown at right will be displayed;
use the directional pad (page 37) to
position the cross-hairs over your
subject, and press C/D (to exit without setting the target,
press the DISP. button). Press the shutter-release button halfway to
focus on the selected target, and then gently press the shutter-
release button the rest of the way down to take the picture.
If the ADJ. lever has been used to select a focus target (page 66),
you cannot select macro target mode by pressing Fnꢀ and Fn2
until the target is canceled.
Snap Focus Distance
Select the distance at which the camera focuses when
Snap is selected for Focus (page 64) or Full Press Snap
is on (page 69). Choose from 1m (3.3ft.), 1.5m (4.9ft.),
2m (6.6ft.), 2.5m (8.2ft.), 3m (9.9ft.), 3.5 m (11.5 ft.), 5m
(16.4ft.), and ∞ (infinity).
Note
When Snap is selected for Focus or Full Press Snap is on, the
snap focus distance can also be selected by rotating the up-
down dial while pressing the N button.
ꢄꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Full Press Snap
Take photographs without pausing to focus the camera
when Multi AF or Spot AF is selected for Focus (page
64).
Option
Off
Description
The function is off.
If the shutter-release is pressed all the way down in one
motion, the camera will take a picture at the focus distance
selected for Snap Focus Distance. Choose when quick
shutter response is required.
On
Same as On, except that ISO sensitivity is automatically set
to Auto-Hi (page 90).
Auto-Hi ISO
Note
The snap focus distance can be changed by rotating the up-
down dial while pressing the N button.
Tip:Autofocus
The camera will focus normally if you press the shutter-release
button halfway.
Cautions
• Full press snap is not available in macro mode or when MF,
Snap, or ∞ is selected for Focus (page 64).
• Care is required to avoid blur caused by camera movement.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢄ. 9
Pre-AF
If On is selected when Multi AF or Spot AF is selected for
Focus (page 64), the camera will continue to focus even
when the shutter-release button is not pressed halfway
(the focus range is narrower than for normal focus). This
may decrease the time needed to focus, potentially
improving shutter response.
Cautions
• Pre-AF is not available when MF, Snap, or ∞ is selected for
Focus (page 64).
• Using pre-AF increases the drain on the battery.
Exposure Metering
Choose how the camera measures light for exposure.
Option
Description
Multi* The camera measures light in 256 areas of the frame.
The camera measures light in the entire frame but assigns
the greatest weight to the center. Use when the subject
in the center of the frame is brighter or darker than the
Center
background.
The camera measures light with the subject in the center
Spot of a frame, ensuring the optimal exposure even when it is
markedly brighter or darker than the background.
* The icon is displayed on the DIRECT screen only.
4:3
N
When Center or Spot is selected,
the current selection is shown by
an icon in the picture display.
ꢅ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Settings
Adjust contrast, sharpness, and vividness (color depth)
or take monochrome photographs.
Option
Description
Take vivid photographs with heightened contrast,
sharpness, and vividness.
Vivid
Standard*
Natural
Normal contrast, sharpness, and vividness.
Creates a softer image with decrease in contrast,
sharpness, and vividness.
Take photographs in black and white. Contrast and
sharpness can be adjusted manually.
Black & White
Creates monochrome photographs with a sepia,
red, green, blue, or purple tint. Vividness, contrast,
and sharpness can be adjusted manually.
B&W (TE)
(ToningꢀEffect)
Make individual adjustments to vividness, contrast,
sharpness, colors and hue to create custom settings
that can be recalled as desired.
Setting 1
Setting 2
* The icon is displayed on the DIRECT screen only.
4:3
N
At settings other than Standard,
the current selection is shown by
an icon in the picture display.
To make individual adjustments to the settings for Black
& White, B&W (TE), Setting1, or Setting2, highlight the
desired option and press Fn2.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢅ. ꢀ
Adjust custom color reproduction settings.
• Black & White: Press + and
– to highlight an option and
1
press Fn1 and Fn2 to change.
• B&W (TE): Adjust vividness,
contrast, and sharpness as
described above. To choose
a tint, highlight Toning
Effect and press Fn2. Press +
and – to highlight an option
and press Fnꢀ to select.
• Setting1/Setting2: Adjust
vividness, contrast, and
sharpness as described
above. To adjust individual
colors, highlight Individual
Color Settings and press Fn2.
Press + and – to highlight an option and press Fnꢀ
and Fn2 to change. Press C/D to exit when
settings are complete.
To call the registered settings, highlight Recall
Settings and press Fn2. Press + or – button to
highlight an option and press C/D.
Return to the Image Settings menu.
Press C/D when settings are complete.
2
3
Exit to shooting mode.
Press C/D, or press Fn1 and then press
C/D.
ꢅ2
Download from Www.Somanuals.com. All Manuals Search And Download.
4:3
N
The option currently selected
for Image Settings will be
displayed in the picture
display.
Note
Options for Image Settings can be displayed by pressing the ADJ.
lever (page 134).
Continuous Mode
Shoot photographs in continuous sequence.
• Continuous: The camera shoots
while the shutter-release button
is pressed.
All the photographs taken in this
mode are saved as individual
still images.
• M-Cont Plus (memory-reversalꢀcontinuousꢀplus): The camera
shoots while the shutter-release button is pressed.
Consecutive still images taken before releasing
the shutter-release button are saved as one MP file
(page 95).
M-Cont Plus can be selected from M-Cont + (HI) and
M-Cont + (LO).
When you remove your finger
from the shutter release button…
…the camera records consecutive still images.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢅ. ꢁ
Note
For M-Cont + (HI) and M-Cont + (LO) options, image sizes and
the number of images saved as one MP file differ depending
on the camera unit. See the documentation provided with the
camera unit for details.
At settings other than Off, the
4:3
N
current selection is shown by an
icon in the picture display.
Caution
Digital zoom is available at settings M-Cont Plus even if Auto
Resize is selected for Digital Zoom Image.
Notes
• At settings other than Off, the flash turns off automatically,
focus and exposure are fixed with the first shot in each series,
and Auto white balance is used in place of Multi-P AUTO (page
86).
• If you release the shutter-release button before reaching
the number of images that are saved as one MP file, the
photographs taken while pressing the button will be saved as
one MP file.
Tip:MPfile
MP is a file format for recording a set of still images.
ꢅꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Bracket
The camera records two or three copies of an image
with variations in exposure, white balance or color.
Option
Description
Auto bracket function is off.
OFF*
The camera records three copies of a photograph in the
specified variation of exposure value.
AE-BKT
The camera records three copies
of each photograph: one with a
“warm,” reddish cast,
a
second
at the white balance currently
selected in the shooting menu
(page 86), and a third with a “cool,”
blueish cast. Choose when you
find it difficult to select the correct
white balance.
WB-BKT
Display after shooting
Record photographs in both black-and-white and color or in
black-and-white, color, and tinted monochrome (page 77).
CL-BKT
* The icon is displayed on the DIRECT screen only.
4:3
N
The current selection is shown by
an icon in the picture display.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢅ. ꢃ
Notes
• Bracketing is not available when an option other than Off is
selected for Continuous Mode. White balance bracketing is not
available when shooting monochrome photographs.
• White balance bracketing and color bracketing are not available
when RAW is selected for Picture Quality/Size (page 61).
• The flash turns off automatically when bracketing is in effect.
• Auto white balance is used in place of Multi-P AUTO when AE-
BKT is selected.
AE-BKT:ExposureBracketing
To specify variations for exposure value:
Select AE-BKT.
Highlight AE-BKT and then press Fn2.
1
Specify the exposure compensation value.
Move the cursor using Fnꢀ
or Fn2, press + or – to specify
the compensation value, and
then press C/D.
2
Return to shooting mode.
Press C/D, or press Fnꢀ and then press
C/D.
3
Notes
• If the same exposure compensation value is set, only one image
will be displayed for the same value.
• The step value of the compensation can be set with Exposure/
Flash Comp. Step in the setup tab (page 140).
ꢅꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
CL-BKT:ColorBracketing
The number and type of photographs recorded when
CL-BKT is selected for Auto Bracket depends on the
option selected for CL-BKT Black & White (TE) in the
setup tab (page 146):
• Off: The camera records two
copies of each photograph, one
in black and white and a second
in color.
• On: The camera records three
copies of each photograph, one
in black and white, a second in
color, and a third using the tint
selected for B&W (TE) in the
Image Settings menu (page 71).
B&W (TE) copy
Tip:Contrast, Sharpness, andColorDepth
The contrast, sharpness, and vividness of the images in the
bracketing sequence are determined by the options selected
in the Image Settings menu (page 71). The black-and-white
copy is recorded at the settings most recently selected for Black
& White, the tinted monochrome copy at the settings most
recently selected for B&W (TE), and the color copy at the setting
currently selected for Image Settings (if Black & White or B&W
(TE) is selected, the color copy will be recorded at a setting of
Standard).
Download from Www.Somanuals.com. All Manuals Search And Downloadꢅ. ꢅ
Flash Exposure Compensation
Adjust flash amount between
–2.0 to +2.0 in steps of 1/2 or
1/3EV. Selecting Flash Exposure
Compensation in the shooting
menu displays the slider shown at
right; press + or – to choose a flash
exposure compensation value and press C/D.
4:3
N
Flash exposure compensation is
displayed in the picture display
except when the flash is off.
Notes
• See page 28 for information on using the flash.
• The step value of the compensation can be set with Exposure/
Flash Comp. Step in the setup tab (page 140).
Caution
Flash exposure compensation may have no effect outside the
range of the flash. See the documentation provided with the
camera unit for details on the range of flash.
ꢅꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Flash Amount
Choose amount of light produced by the flash in manual
flash mode (page 28). Flash amount is expressed as a
fraction of full power (all values are approximate):
FULL 1/1.4 1/2 1/2.8 1/4 1/5.6 1/8 1/11 1/16 1/22 1/32 1/64
4:3
N
Flash level is displayed in the
picture display in manual flash
mode.
Note
Flash exposure compensation is not available in manual flash
mode.
Caution
Do not direct the flash at a person operating a motor vehicle or
use the flash close to the subject’s eyes. Particular care should be
observed when photographing infants.
Flash Synchro Settings
Choose how the flash synchronizes with the shutter.
• 1st Curtain: The flash fires at the beginning of the
exposure. Recommended in most situations.
• 2nd Curtain: The flash fires at the end of the exposure.
This option produces trails of light behind moving light
sources.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢅ. 9
Noise Reduction
Choose Weak or Strong to reduce noise (random
variations in brightness and color) in photographs taken
at high ISO sensitivities. The minimum ISO sensitivity
at which noise reduction applies can be selected using
Noise Reduction ISO.
is displayed when noise
reduction is on.
Notes
• When RAW is selected for Picture Quality/Size (page 61), noise
reduction applies only to the JPEG copy, not to the DNG file.
• The time needed to record photographs varies with the option
selected for Noise Reduction.
Noise Reduction ISO
Select the minimum ISO sensitivity to apply noise
reduction function to when Weak or Strong is selected
for Noise Reduction. Choose from All (noise reduction
applies at all ISO sensitivities), Over ISO 201, Over ISO
401, Over ISO 801, Over ISO1601, and ISO3200.
ꢆ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Distortion Correction
Set Distortion Correction to On to shoot by
automatically correcting the distortion of the image.
is displayed when distortion
correction is on.
Cautions
• Even if Distortion Correction is set to On, the correction is not
applied depending on the type of camera unit or when it is
not necessary depending on the zoom position. However, the
distortion correction symbol will appear in playback mode for
the images without the correction applied.
• The distortion correction function is not available for DNG files,
JPEG copies for raw data, MP files, and movies.
• When Distortion Correction is set to On, the angle of view will
change.
• The corrected image will not be displayed in the picture display
even if Distortion Correction is set to On.
Auto Macro
With Auto Macro set to On, the camera automatically
switches to the macro mode when focusing on a subject
close to the lens even if the camera is not in macro
mode.
N is displayed when the camera switches to macro
mode.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢆ. ꢀ
Custom Self-Timer
To set the number of photographs to take and the
interval of shooting for the custom setting of the self-
timer option, select Custom Self-Timer in the shooting
menu and follow the steps below:
Choose the number of photographs to take and
the interval of shooting.
Press Fnꢀ or Fn2 to highlight the numbers, and press
+ or – to change. Press C/D to return to
shooting mode.
1
Start shooting.
Press the shutter-release button. The specified
number of photographs will be taken automatically
at the selected interval.
2
Press C/D to cancel the self-timer before
finishing shooting the specified number of
photographs.
ꢆ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Interval Shooting
To take photographs automatically at intervals of from
five seconds to one hour, select Interval Shooting in the
shooting menu and follow the steps below:
Choose an interval.
1
Press Fnꢀ and Fn2 to highlight
hours, minutes, or seconds
and press + and – to change.
Press C/D to return to
shooting mode.
4:3 N
Interval is displayed in the
picture display.
Start shooting.
Press the shutter-release button. Photographs will
be taken automatically at the selected interval.
2
End shooting.
Press C/D to end shooting.
3
Cautions
• The interval timer is not available in 4 mode.
• The interval resets to zero when the camera is turned off.
• If the time needed to record photographs is longer than the
selected interval, the next photograph will not be taken until
recording is complete.
• The external flash unit will not fire in interval shooting mode.
Use the built-in flash instead.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢆ. ꢁ
Notes
• Use a fully-charged battery and be sure that sufficient space
remains in internal memory or on the memory card. Interval
timer photography ends automatically when the internal
memory or memory card becomes full.
• Photographs can be taken at any time by pressing the shutter-
release button.
• If Continuous or M-Cont Plus is selected for Continuous
Mode, continuous shooting turns off automatically.
Date Imprint
The camera imprints the shooting date on a picture.
Select an option from Date (YY/MM/DD) and Date and
Time (YY/MM/DD hh:mm).
DATE is displayed when date
imprint is on.
Notes
• Date imprint is not available when the clock is not set. Set the
clock (pages 20, 149) before using date imprint.
• The date cannot be imprinted on movies.
• When RAW is selected for Picture Quality/Size, the date is
imprinted only on the JPEG copy, not the DNG file.
• The date is permanently imprinted on the image and cannot be
removed.
ꢆꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Exposure Compensation
Exposure compensation may be required in the
following situations:
• Very bright backlighting: Subjects that are very strongly
backlit may be underexposed. Try increasing exposure
compensation.
• The frame is dominated by very bright objects: The subject
may be underexposed. Try increasing exposure
compensation.
• The frame is mostly dark (for example, a spotlit subject on
a darkened stage): The subject may be overexposed.
Try reducing exposure compensation.
Display the exposure compensation slider.
Highlight Exposure
Compensation in the
shooting menu, and press Fn2
to display the slider shown at
right.
1
Adjust exposure compensation.
Press + or – to adjust an exposure compensation
value. Press the shutter-release button to take a
picture or press C/D to return to shooting
mode.
2
At settings other than 0.0,
exposure compensation is
displayed in the picture display.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢆ. ꢃ
Caution
Exposure compensation is not available in mode M.
Note
The step value of the compensation can be set with the
Exposure/Flash Comp. Step option in the setup tab (page 140).
White Balance
At the default setting of Multi-P AUTO, the camera
automatically adjusts white balance so that a white
subject will appear white regardless of the color of the
light source. It may however be necessary to match
white balance to the light source under mixed lighting
or when photographing a subject that is a solid color.
Option
Auto*
Description
The camera adjusts white balance automatically.
The camera adjusts white balance to account for
Multi-P AUTO differences in lighting in separate areas of the frame (in
continuous mode, this option is equivalent to Auto).
Outdoors
Cloudy
Use when shooting in daylight under clear skies.
Use when shooting in daylight under cloudy skies.
Incandescent
Lamp
Use with incandescent lighting.
Use with fluorescent lighting.
Fluorescent
Lamp
Manual
Settings
Measure white balance manually (page 88).
Detail
Make fine adjustments to white balance (page 88).
* The icon is displayed on the DIRECT screen only.
ꢆꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
4:3
N
At settings other than Auto, the
current selection is shown by an
icon in the picture display.
Cautions
• Auto white balance may not produce the desired results in
scenes without white objects. This can be corrected by adding a
white object to the scene before shooting.
• Options other than Auto may not produce the desired results
when the flash is used. Select Auto when using the flash.
Display white balance options.
Highlight White Balance in shooting menu, and
press Fn2 to display options.
1
Select an option.
Press + or – to select an option.
Press the shutter-release button to take a picture
or press the ADJ. lever or C/D to return to
shooting mode.
2
Note
Options for White balance can be displayed by pressing the ADJ.
lever (page 134).
Download from Www.Somanuals.com. All Manuals Search And Downloadꢆ. ꢅ
Manual:MeasuringWhiteBalance
To measure a value for white balance:
Select Manual Settings.
1
Highlight Manual Settings
in the white balance menu.
Measure white balance.
2
Frame a blank piece of paper
or other white object so that
it fills the frame and press the
DISP. button. Repeat steps 1 and 2 until the desired
effect is achieved.
Return to shooting mode.
Press C/D to return to shooting mode.
3
Note
Selecting an option other than Manual Settings resets manual
white balance.
Detail:MakingFineAdjustmentstoWhiteBalance
To make fine adjustments to white balance:
Select Detail.
Highlight Detail in the
white balance menu and
1
press the DISP. button.
ꢆꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose a setting.
2
3
Press + or – to choose a white
balance. Press C/D
when settings are complete.
Return to shooting mode.
Press C/D to return to shooting mode.
Note
Selecting an option other than Detail resets detail white balance.
White Balance Compensation
Compensate for color casts by modifying white
balance on the green-magenta or blue-amber axis. The
modifications apply to the option currently selected
for white balance and to all options selected while the
modifications are in effect.
Selecting White Balance
Compensation in the shooting
menu (page 58) displays the
controls shown at right. Choose
white balance compensation
using the directional pad (page
37). Press the DISP. button to reset
white balance compensation to
a neutral value. Press C/D
Amount
Green
Amber
to save changes and exit, or press
the DISP. button twice to cancel.
Magenta
Blue
Download from Www.Somanuals.com. All Manuals Search And Downloadꢆ. 9
4:3
N
White balance compensation is
shown in the picture display.
Notes
• White balance compensation can be
assigned to the ADJ. lever (page 134).
To reset, highlight Reset and press
C/D.
• White balance compensation can also
be assigned to the Fn buttons (page
136).
• When the mode dial is rotated to 4, white balance
compensation is only available in movie mode.
• The White Balance Compensation option in the playback
menu (page 109) does not use the same values as the shooting
menu option.
ISO Setting
Adjust the camera’s sensitivity to light. Higher values can
be used for faster shutter speeds when the subject is
poorly lit, preventing blur.
• Auto: The camera automatically adjusts sensitivity
according to brightness, the distance to the subject,
the options selected for macro mode, and picture
quality and size.
• Auto-Hi (high sensitivity auto): The camera
automatically adjusts sensitivity according to shooting
conditions. Comparing to the Auto setting, higher
sensitivities can be selected for the subject poorly lit.
The maximum sensitivity can be selected with ISO
Auto-High Settings in the setup tab (page 140).
90
Download from Www.Somanuals.com. All Manuals Search And Download.
• ISO (value): The camera shoots with the selected ISO
value. Available ISO values differ depending on the
camera unit. See the documentation provided with the
camera unit for details.
The current sensitivity is shown
in the picture display (if Auto or
ISO 200
2.5
Auto-Hi is selected, the sensitivity
selected by the camera is shown
when the shutter-release button
is pressed halfway).
Select an ISO sensitivity option.
Press + or – to select an option.
1
Shoot or return to the shooting mode.
Press the shutter-release button to take a picture, or
press C/D to return to shooting mode.
2
Notes
• Options for ISO setting can be displayed by pressing the ADJ.
lever (page 134).
• The sensitivity when using the flash and the range of available
sensitivities differ depending on the camera unit. See the
documentation of the camera unit for details.
• “Noise”(random variations in brightness and color) may appear
in photographs taken at high sensitivities.
Restore Defaults
To restore default shooting menu settings (page 59),
rotate the mode dial to 5 and select Restore Defaults
in the shooting menu. A confirmation dialog will be
displayed; highlight Yes and press C/D to restore
default values and exit to shooting mode.
Download from Www.Somanuals.com. All Manuals Search And Download9. ꢀ
Auto Aperture Shift
When On is selected, the camera will automatically
adjust aperture to prevent overexposure in the aperture
priority mode.
Note
Auto aperture shift is available only in the aperture priority mode.
Switch Shooting Mode
When the mode dial is rotated
to a MY mode (page 57), you can
use this option to switch between
5, P, A, S, and M modes without
rotating the mode dial to a
new setting. This option is only
available in MY modes, however, it is not available if a
scene mode is assigned to MY mode.
Camera Shake Correction
Select Camera Shake Correction to On to prevent blur
caused by camera shake.
E is displayed when camera shake correction is on.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions
• This function is not available depending on the camera unit.
• The camera shake correction function is not available in movie
mode, continuous mode, or when the shutter speed is set to 1
or more seconds in manual exposure mode. If the function is set
on in continuous mode or when the shutter speed is set to 1 or
more seconds in manual exposure mode, E changes to F,
and in the movie mode, E disappears.
• The camera shake correction function cannot prevent the blur
caused by the movement of the subject (caused by wind, etc.).
• Effects of the camera shake correction function differ
depending on the surroundings.
Note
J appears in the picture display when camera shake is likely
to occur.
Download from Www.Somanuals.com. All Manuals Search And Download9. ꢁ
Playback Functions
This section describes how to view movies and MP files.
Viewing Movies
Follow the steps below to view movies.
Press the 6 button.
Press the 6 button to display pictures in the
picture display.
1
Display the movie.
2
Press +, –, Fnꢀ, and Fn2 (page
34) to scroll through pictures
until the first frame of the
movie is displayed. Movies are
indicated by a 3 icon.
2010
Start playback.
Press the ADJ. lever to start playback. Progress
is shown in the playback display. The following
operations can be performed:
3
To
Press
Description
Hold the z button to fast forward, and the
Z button to rewind. If movie is paused, press
Advance/
rewind
z/Z the z or Z button to advance or rewind
one frame; keep the button pressed for slow
advance or rewind.
Pause/
resume
Press the ADJ. lever to pause; press again to
resume.
ADJ.
Adjust
volume
+/– Press + to increase volume, – to decrease.
9ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing MP Files
When you shoot images with M-Cont Plus, the images
are recorded as one MP file. Follow the steps below to
view MP files.
Note
Images shot in normal continuous mode can be played back in
the same way as normal still images.
1 Press the 6 button.
Display the MP file.
The MP file is displayed with the S symbol.
2
The display changes as follows.
Display for step 2
• Press the DISP. button to change between
“Normal”and “No Display”.
• The images cannot be enlarged even if
F
3.3
1/55
2010/03/01 14:09
ISO 200 EV +1.0
the z button is pressed. The images are
displayed in thumbnail view.
• The other operations are the same as those
for normal still images.
z
ADJ. lever
Z
Z
6/6
Thumbnail view
• The MP file images are displayed in
thumbnail view.
• Use the directional pad (page 37) to select
a frame.
• The DISP. button is disabled.
2010/03/01 14:09
F
3.3
1
55
z
ADJ. lever
100-0001
6
6
Single frame view
• Single frame selected on the thumbnail
view is displayed.
• Press the z button to enlarge the image.
F
3.3 1/55
2010/01/01 02:33 ISO 200 EV +1.0
ADJ. lever
Download from Www.Somanuals.com. All Manuals Search And Download9. ꢃ
100-0001
2
6
Slide Show
• Images are displayed automatically in the
order they were consecutively shot, starting
with the displayed frame.
Stop
2010/01/01 02:33 ISO 200 EV +1.0
F
3.3 1/55
The operations during slide show are shown below.
Pause/Playback Press the ADJ. lever.
Fast Forward
Rewind
Press and hold z during playback.
Press and hold Z during playback.
Press and hold z during pause.
Press and hold Z during pause.
Press z during pause.
Slow Playback
Slow Rewind
Next Frame
Previous Frame
First Frame
Last Frame
Press Z during pause.
Press the ADJ. lever to the left during pause.
Press the ADJ. lever to the right during pause.
Cautions
• The DPOF, Trim, Resize, Skew Correction (playback mode),
Level Compensation, and White Balance Compensation
functions are not available for MP files.
• Flag Function Setting and Protect cannot be set for individual
frames in an MP file. If Flag Function Setting or Protect is set
when the thumbnail view or single image view is displayed, the
setting will be applied to the MP file instead of an individual
frame.
• Individual frame of an MP file cannot be deleted.
9ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Exporting MP Files
Follow the steps below to extract specific frames from
an MP file and save each frame as an individual still
image.
Notes
• The extracted image is saved in the same size as the original.
• The original files will be retained after extraction.
1 Press the 6 button.
Display the MP file you want to export.
The MP file is displayed with
the S symbol.
2
To export multiple frames,
you can also press the z
F
3.3
1/55
2010/03/01 14:09
ISO 200 EV +1.0
button to display thumbnail
view, and then go to step 3.
Press C/D.
The playback menu appears.
3
4
Press + or – to select Export
Still Images, and then press
Fn2.
Download from Www.Somanuals.com. All Manuals Search And Download9. ꢅ
SelectingOneFrame
Press + or – to select 1 Frame.
5
Press Fnꢀ or Fn2 to select the
frame.
6 Press C/D.
SpecifyingMultipleFramesSeparately
Press + or – to select Sel Mult, and then press
C/D.
If thumbnail view was
displayed in step 2 on page
97, skip step 5.
5
Press + or – to select
6
Sel. Indiv., and then press
C/D.
Select the frame, and then press C/D.
Press the ADJ. lever to switch to the display for
specifying a range of frames. See step 7 and beyond
on page 99.
7
Repeat step 7 to select all the frames.
To deselect a frame, highlight the frame and press
C/D.
8
9 Press the N button.
10 Select Yes, and then press C/D.
9ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
SpecifyingaRangeofMultipleFrames
Press + or – to select Sel Mult, and then press
C/D.
If thumbnail view was
displayed in step 2 on page
97, skip step 5.
5
Press + or – to select
6
Sel. Range, and then press
C/D.
Select the starting point for the range of frames
you want to specify, and press C/D.
If you make a mistake when selecting the starting
point for the range of frames, press the DISP. button
to return to the screen for selecting the starting
point.
7
Press the ADJ. lever to switch to the display for
specifying frames separately. See step 7 and beyond
on page 98.
Export Still Images
Select the ending point for
the range of frames you
want to specify, and press
8
C/D.
Start
Execute
9 Repeat steps 7 and 8 to specify all ranges.
10 Press the N button.
11 Select Yes, and then press C/D.
Download from Www.Somanuals.com. All Manuals Search And Download9. 9
SelectingAllFrames
Press + or – to select
All Frames, and press
C/D.
5
6
Select Yes, and then press
C/D.
ꢀ00
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Menu
This section details the options in the playback menu
and describes how to view pictures on a TV.
Playback Menu
Press the 6 button in shooting mode and follow the
steps below.
Display the playback menu.
Press C/D.
1
Select a menu item.
Press + or – to scroll through the menu and press Fn2
to display options for the highlighted item.
2
Note
The items on the next page can be displayed by pressing
– while pressing the DIRECT button.
The playback menu contains the following options:
Option
Flag Function Setting
Flag Function Display
Resize
Page
Option
Page
111
112
102 Slide Show
103 Protect
104 Copy to Card from Internal Memory 115
Trim
105 DPOF
115
97
Level Compensation
White Balance Compensation
Skew Correction
106 Export Still Images
109 Recover File
110
117
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 0ꢀ
Note
The menus for camera setup can be accessed from the playback
menu (page 126).
Flag Function Setting
Register the frequently viewed image files to Flag
Function Setting (up to 20 files) to recall the images
easily by selecting Flag Function Display at a later time.
Setting/CancelingOneFileataTime
To set or cancel one file at a time, play the picture back and press
C/D. Highlight Flag Function Setting in the playback
menu and press Fn2 button. Highlight Set or Cancel, and then
press C/D.
Notes
• When a file is set, the symbol appears on the screen.
• If 20 files have already been set, no more files can be set. Cancel
some files and set desired files.
Setting/CancelingMultiplefilesataTime
Follow the steps below to set or cancel multiple files at
a time.
Display the thumbnail view.
Press the z button in playback mode.
1
Select a picture.
Highlight a picture and press C/D.
2
Select Flag Function Setting and then press Fn2.
Selected pictures are marked with the icon.
3
ꢀ02
Download from Www.Somanuals.com. All Manuals Search And Download.
Select additional photographs.
4
Press Fnꢀ or Fn2 to highlight additional photographs
and press C/D. Repeat this procedure to set
or cancel all the desired files. To cancel the selected
photographs, press C/D when the file is
selected.
Cautions
• If the name of the file set to Flag Function Setting is changed
using a computer, Flag Function Setting is canceled for the
file.
• When the contents of the internal memory are copied to an SD
memory card, Flag Function Setting that have been set for the
files in the internal memory is canceled.
• When a file in an SD memory card is set to Flag Function
Setting, [CLIPINFO] folder and CLIP.CLI file are created on the
SD memory card. If these are deleted, Flag Function Setting is
canceled for the corresponding files.
• If the name of a file is changed using a computer, Flag
Function Setting may not be able to be set to the files.
• Only images taken using this camera body can be set to Flag
Function Setting.
Flag Function Display
To display the images set to Flag Function Setting,
select Flag Function Display in the playback menu.
Notes
• The file set to Flag Function Setting with the smallest file
number is displayed.
• Pressing the shutter - release button or the 6 button switches
to shooting mode.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 0ꢁ
• If no files are set to Flag Function Setting, a message appears
and the display returns to the playback menu.
• If multiple files are set to Flag Function Setting, pressing the
N button displays the image with the smallest file number.
• When a file set to Flag Function Setting is displayed in the
full frame, pressing the +, –, Fnꢀ or Fn2 buttons switches to the
previous or next image.
Resize
To create a small copy of a photograph, select Resize in
the playback menu (page 101) and choose a size. The
photographs taken in L, M, ꢃM or ꢁM size (page 61) can
be copied in ꢀM or VGA size, and the photographs taken
in ꢀM can be copied in VGA. Movies and RAW-quality
photographs cannot be resized.
Notes
• The images are copied in the aspect ratio of 4:3. If the aspect
ratio of original photograph is 16:9, 3:2, or 1:1, the left and
right, or the upper and lower parts of images are trimmed and
displayed with black border on the screen.
• See page 61 for information on choosing the size of
photographs during shooting.
ꢀ0ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Trim
Follow the steps below to trim a still image and then
save it as a separate file.
Display a photograph.
Display the photograph to be copied in playback
mode.
1
Select Trim.
Press C/D to display the playback menu,
highlight Trim, and press Fn2. To cancel trimming,
2
press the DISP. button.
Trim the photograph.
Set the size of the trimming frame with the z or
Z button, and the position of the trimming frame
with the directional pad (page 37), and then press
C/D.
3
Cautions
• Only images taken using this camera body can be trimmed.
• Movies and MP files cannot be trimmed.
• For RAW images (page 61), trimming function applies only to
the JPEG copy.
• Images can be trimmed repeatedly, however, the quality of the
image will be degraded each time by recompression.
Notes
• If an image is trimmed, the compression rate changes to Fine.
For images in other sizes, the compression rate will be the same
as the original’s.
• The available settings for the trimming frame size differ
depending on the original image size. Each time you press the
z button, the trimming frame decreases in size by one level, at
the maximum of 13 levels.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 0ꢃ
• The trimmed image size differs depending on the image’s
original size and the trimming level (the size of trimming frame).
Level Compensation
Create copies that have been processed to adjust
brightness and contrast. Correct brightness and contrast
automatically or make manual adjustments using a
histogram.
Auto:AutomaticLevelCompensation
Display a photograph.
Display the photograph to be copied in playback
mode.
1
Select Level Compensation.
2
Press C/D to display
the playback menu, highlight
Level Compensation, and
press Fn2.
Select Auto.
Highlight Auto and press
Fn2. If the camera is able to
3
create a copy, a preview will
be displayed with the original
image displayed at upper left,
the corrected copy at right. If
the camera cannot create a copy, an error message
will be displayed and the camera will exit to the
playback menu.
ꢀ0ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy the image.
4
Press C/D. To exit without creating a copy,
press the DISP. button. A message will be displayed
while the camera copies the photograph.
Manual:ManualLevelCompensation
Display the photograph to be copied and select Manual
for Level Compensation in the playback menu to
display a preview as described on the preceding page,
then follow the steps below.
Select the black point, white point, or mid-point.
The manual preview contains
a histogram showing
1
how pixels of different
brightnesses are distributed
in the image, with dark pixels
(shadows) on the left and
From left to right:
bright pixels (highlights) on
black point, mid-
the right. Press the ADJ. lever
point, white point
in to cycle through the black
point, mid-point, and white point and press Fnꢀ
or Fn2 to position the selected point for enhanced
brightness and contrast as described on the
following page. For help, press the N button; press
the button again to return to the preview display.
Copy the image.
Press C/D. To exit without creating a copy,
press the DISP. button. A message will be displayed
2
while the camera copies the photograph.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 0ꢅ
Tip:ChoosingtheBlackPoint, WhitePoint, andMid-Point
• Adjusting brightness: To make the
image brighter, move the mid-point
to the left. Moving the mid-point to
the right makes the image darker.
• Correcting exposure: If the image is
overexposed, move the black point
to the right until it lines up with the
darkest pixel in the histogram (see
right). If the image is underexposed,
move the white point to the left until
it lines up with the brightest pixel.
You can then move the mid-point left
or right to adjust brightness.
Correcting overexposure
• Increasing contrast: To increase contrast,
align the black point and white point
with the darkest and brightest pixels
as shown at right. You can then move
the mid-point left or right to adjust
brightness.
Cautions
• Level compensation is available only with still images taken
using this camera body. It is not available with movies or
pictures taken using M-Cont Plus. The desired results may not
be achieved with monochrome images.
• Level compensation can be applied multiple times, however,
the quality of the image will be degraded each time by
recompression.
ꢀ0ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
White Balance Compensation
Create copies with modified white balance.
Display a photograph.
Display the photograph to be copied in playback
mode.
1
Select White Balance Compensation.
Press C/D to
display the playback menu,
highlight White Balance
Compensation, and press
Fn2.
2
Adjust white balance.
3
Choose white balance
compensation using the
directional pad (page 37).
Press the DISP. button to reset
white balance compensation
to a neutral value.
Press C/D.
Press C/D to copy the image (to exit without
creating a copy, press DISP. twice). A message will be
4
displayed while the camera copies the photograph.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 09
Cautions
• White balance compensation is available only with still images
taken using this camera body. It is not available with movies or
pictures taken using M-Cont Plus. The desired results may not
be achieved with monochrome images.
• White balance compensation can be applied multiple times,
however, the quality of the image will be degraded each time
by recompression.
Skew Correction
Create copies that have been processed to reduce the
effects of perspective on rectangular objects, such as
message boards or business cards.
Display a photograph.
Display the photograph to be copied in playback
mode.
1
Select Skew Correction.
2
Press C/D to display
the playback menu, highlight
Skew Correction, and press
Fn2. If the camera is able to
detect an object that can be
used to correct perspective,
a message will be displayed with the object shown
by an yellow frame. The camera can detect up to
five objects; to select a different object, press Fn2,
or press + to exit without correcting perspective. If
the camera is unable to detect a suitable subject, an
error message will be displayed.
ꢀꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Press C/D.
3
A message will be displayed while the camera
copies the photograph. Copying takes from about 2
to 46 seconds, depending on image size.
Caution
Skew correction is available only with still images taken using
this camera body. It is not available with movies or pictures taken
using M-Cont Plus. For RAW images (page 61), skew correction
applies only to the JPEG copy.
Notes
• The copy is the same size as the original. More time is needed to
create a copy for larger image sizes:
Size
Time (approx.)
Size
Time (approx.)
L
24sec.
3M
8sec.
M
18sec.
1M
5sec.
5M
12sec.
VGA
2sec.
To reduce the time required, create a small copy of the original
using Resize (page 104) and perform skew correction on the
copy.
• The time required for skew correction differs depending on the
camera unit.
• Skew correction can also be performed during shooting (page
56).
Slide Show
Selecting this option starts an automated slide show.
Pictures are displayed at three second intervals in the
recorded order. When a movie is displayed, movie
playback begins automatically.
The slide show repeats until stopped; press any button
to end the slide show.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢀꢀ
Protect
4:3 N
Protect pictures from accidental
deletion. Protected files are
indicated by the icon shown at
right.
Caution
Formatting erases all files, including protected files.
ProtectingIndividualPictures
To protect or remove protection
from individual files, play the
picture back, select Protect in
the playback menu, and press Fn2
to display the options shown at
right (if the desired image is not
displayed, press Fnꢀ or Fn2 to view
other pictures). Highlight 1 File and press C/D.
ꢀꢀ2
Download from Www.Somanuals.com. All Manuals Search And Download.
ChangingtheProtectStatusofMultipleFiles
Follow the steps below to change the protect status of
multiple selected files.
Select Protect in the playback menu, and press
Fn2.
In multi-frame playback,
proceed to step 2. In single-
frame playback, the options
shown at right will be
1
displayed. Highlight Sel Mult
and press C/D.
Select Sel. Indiv. or Sel. Range.
Select Protect in the
playback menu, and press Fn2
2
to display the options shown
at right. To select images
one at a time, highlight Sel.
Indiv., press C/D, and
proceed to step 3. To select images by specifying
ranges highlight Sel. Range, press C/D, and
proceed to step 3.1.
Select a photograph.
3
4:3
N
Use the directional pad
(page 37) to highlight a
photograph, and press
C/D. Protected
pictures are marked with a
icon. To remove protection
from a photograph, highlight it and press C/
D again.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢀꢁ
Tip:SelectingRanges
To switch from Sel. Indiv. to Sel. Range, press the ADJ. lever
and follow the steps below:
4:3
N
3.1 Use the directional pad to
highlight the first image of the
range, and press C/D
to select. The selected image
is marked with an icon. To
deselect the image, press the
DISP. button.
4:3
N
3.2 Use the directional pad to
highlight the last image, and
press C/D to select.
The selected images will be
marked with a
icon.
Repeat steps 3.1–3.2 to select additional ranges, or press the
ADJ. lever to select or deselect individual photographs as
described in step 3.
Press the N button.
4
A message will be displayed while the camera
protects the selected files. The camera will then
return to normal playback.
ProtectingorRemovingProtectionfromAllFiles
To protect all files, select Protect
and press Fn2. Highlight Select All
and press C/D. To remove
protection from all files, highlight
Cancel All and press C/D.
ꢀꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy to Card from Internal Memory
To copy all files from internal memory to a memory card,
insert the memory card in the camera body and select
Copy to Card from Internal Memory in the playback
menu. A message will be displayed while copying is
in progress; the camera will return to playback when
copying is complete.
Notes
• If the space available on the memory card is insufficient to copy
all the files in internal memory, a message will be displayed. To
copy only those files that will fit in the space available, highlight
Yes and press C/D; to exit without copying any files,
select No.
• Files cannot be copied to internal memory from a memory card.
DPOF
To request professional prints of the photographs on
a memory card, first use this option to create a digital
“print order”listing the photographs you wish to print
and the number of prints, and then take the memory card
to a digital print service center that supports the DPOF
standard.
Note
If a RAW file is selected for printing, only the JPEG copy will be
printed.
Tip:DPOF
DPOF (Digital Print Order Format) is a standard used to specify
the photographs to be printed and the number of prints.
Photographs selected for printing are marked with a DPOF print
indicator (page 9).
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢀꢃ
SelectingIndividualPhotographsforPrinting
To add a photograph to or
remove it from the print order,
play the picture back, select
DPOF in the playback menu, and
press Fn2 to display the options
shown at right (if the desired
image is not displayed, press Fnꢀ or Fn2 to view other
pictures). Highlight 1 File and press C/D.
SelectingAllPhotographsforPrinting
To select all photographs for
printing, select DPOF, press
Fn2, highlight Select All, and
press C/D. To remove
all photographs from the print
order, highlight Cancel All and
press C/D.
SelectingMultiplePhotographsforPrinting
To select multiple photographs for printing:
Select DPOF.
Press C/D in multi-
frame playback to display the
playback menu. Highlight
DPOF and press Fn2.
1
ꢀꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Select photographs and choose the number of
prints.
Press Fnꢀ or Fn2 to highlight additional photographs
and + or – to choose the number of prints. To
remove a photograph from the print order, press
– until zero is displayed.
2
3
Press C/D.
A message will be displayed while the camera
creates the print order. The camera will then return
to multi-frame playback.
Recover File
To restore all the deleted files, select Recover File in
playback menu, and then press Fn2. The confirmation
message appears. Select Yes and then press C/D.
Note
If there are no files to be restored, a message appears.
Cautions
The files cannot be restored after performing any of the following
operations.
• Turning the camera off
• Switching from playback mode to shooting mode
• Using DPOF, Resize, Copy to Card from Internal Memory,
Skew Correction, Level Compensation, White Balance
Compensation or Trim function.
• Deleting files with DPOF settings
• Initializing Internal memory or SD memory card
• Setting or canceling files for Flag Function Setting
• Exporting MP files using Export Still Images
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢀꢅ
Viewing Pictures on TV
To view pictures on a TV, connect the camera body using
the supplied A/V cable.
Turn the camera body off.
Be sure the power is off before connecting or
disconnecting the A/V cable.
1
Connect the A/V cable to the TV.
2
Video input (yellow)
Insert the white plug into the
audio input connector, the
yellow plug into the video
input connector. Be sure the
plugs are securely connected.
Do not use force.
Audio input (white)
Connect the camera body.
Open the connector cover and
plug the cable into the A/V
cable connector. Do not use
force.
3
Tune the television to the
video channel.
Select video input. See the television manual for
details.
4
5
Turn the camera body on.
Press the 6 button for about a second to turn the
camera body on in playback mode. The camera
body’s picture display and speaker will turn off, and
photographs and movies will be played back on the
TV.
ꢀꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
Do not use force or tug the A/V cable when handling the camera
body with the A/V cable connected.
Notes
• The camera body can be connected to the video input
connector on a video recorder, and pictures can be recorded to
video or DVD.
• The camera body can be connected to TVs that support
HDMI using an HDMI mini cable (sold separately). See the
documentation provided with TVs for details.
• If connecting or disconnecting the HDMI mini cable, the display
switches to single-frame view. When the menu is displayed,
it will not switch to single-frame view even if connecting or
disconnecting the HDMI mini cable.
• When connecting the camera body to a TV using an HDMI mini
cable, the operational sounds turn off.
• The camera body supports the following video standards:
NTSC (used in North America, the Caribbean, parts of Latin
America, and some East Asian countries) and PAL (used in the
United Kingdom and much of Europe, Australia, New Zealand,
and parts of Asia and Africa). SECAM is not supported. Where
possible, it is set to the standard used in your country or
region before shipment; before connecting the camera body
to a device that uses a different video standard, choose the
appropriate video mode (page 149).
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢀ9
Printing Photographs
The camera body can be connected to a printer via
the supplied USB cable, and photographs can be
printed directly from the camera body without using a
computer.
Caution
Movies cannot be printed. If a RAW file is selected for printing,
only the JPEG copy will be printed.
Note
The camera body conforms to PictBridge, a standard widely
used for direct printing, and direct printing is consequently
only available with PictBridge-compliant printers. See the
documentation provided with your printer for information on
whether it supports PictBridge.
Connecting the Camera Body
Connect the power to the printer using the supplied
USB cable.
Turn the camera body off.
Be sure that the power is off before connecting or
disconnecting the USB cable.
1
Connect the USB cable to the printer.
Connect the USB cable to the printer and turn the
printer on.
2
ꢀ20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the camera body.
Open the connector cover
and plug the cable into the
USB cable connector.
3
Press the ADJ. lever. The
camera body will turn on and
the message shown at right
will be displayed; press the
ADJ. lever again immediately.
Note
If you do not press the ADJ. lever while the above message
is displayed, it may in some cases be replaced after two
seconds by a message stating that the camera body is
connecting to a computer. Turn the camera body off and
press the ADJ. lever again.
The message will be replaced by the PictBridge
playback display (if the PictBridge playback
display does not appear, the camera body is still
establishing a connection to the printer).
Caution
Do not use force when connecting the USB cable or when
handling the camera body with the cable connected.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 2ꢀ
Printing
Photographs can be printed one at a time or multiple
photographs can be selected for printing. If a memory
card is inserted, the pictures will be printed from the
memory card; otherwise pictures will be printed from
internal memory.
Caution
Do not disconnect the USB cable while printing is in progress.
Note
If an error is displayed during printing, check the printer and take
the appropriate action.
Printing Photographs One at a Time
To print a selected photograph:
Select a Photograph.
1
Press Fnꢀ or Fn2 until the
desired Photograph is shown
in the PictBridge playback
Cancel
display and press the ADJ.
1
File
All Files
Execute
lever. The menu shown
at right will be displayed;
highlight 1 File and press C/D.
Tip:PrintingOneCopyofAllPhotographs
To print one copy of all Photographs, press the ADJ. lever to
display the options shown above and select All Files.
ꢀ22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust printer settings.
The menu shown at right
will be displayed; highlight
2
an item and press Fn2 to
view the options available,
or choose Printer Select to
use the default setting for
the current printer (the options available vary with
the type of printer; items not supported by the
connected printer cannot be selected). Press + or
– to highlight an option and press C/D to
select and return to the direct print menu.
Item
Paper Size
Paper Type
Layout
Description
Choose the paper size.
Choose the paper type.
Choose the number of pictures per page.
Include the time and date of recording. See pages
20 and 149 for information on selecting the order
in which the time and date are displayed. If the
picture was taken using Date Imprint (page 84),
only the imprinted date will be printed.
Date Print
File Name Print Include the file name.
Optimize Image Choose whether the printer optimizes photo data.
Print Size
Choose the print size.
Choose the print quality.
Print a report.
Print Quality
Report Print*
Printing Quantity Choose the number of copies.
Toner Saving*
Use less toner during printing.
1-Side/2-Sides* Print on one or both sides of the paper.
* Ricoh printers only. Visit http://www.ricoh.com/ for details.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 2ꢁ
Note
To select the highlighted option
as the default for the current
printer when the camera body is
connected, press the ADJ. lever.
The menu shown at right will be
displayed; highlight Set and press
C/D. Select Cancel to exit without changing the
default setting.
Start printing.
3
To start printing, press C/D when the direct
print menu shown in step 2 is displayed. A message
is displayed during printing; to exit before printing
is complete, press the DISP. button. The PictBridge
playback display will appear when printing is
complete.
ꢀ2ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Multiple Photographs
To print multiple photographs:
Press the Z button.
1
4:3
N
Photographs will be
displayed in multi-frame
playback.
Select a picture.
Highlight a picture and press
C/D.
2
Choose the number of prints.
Press + or – to choose the
number of prints. Selected
pictures are marked with
3
a
icon; to deselect a
photograph, press – until
zero is display.
Select additional Photographs.
Press Fnꢀ or Fn2 to highlight additional photographs
and press + or – to choose the number of prints.
4
5
6
Adjust printer settings.
Press C/D to display the direct print menu.
Adjust settings as described on page 123.
Start printing.
To start printing, press C/D when the direct
print menu is displayed. A message is displayed
during printing; to exit before printing is complete,
press the DISP. button. The PictBridge playback
display will appear when printing is complete.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 2ꢃ
Camera Settings
The menus for modifying the camera settings can be
accessed from the shooting and playback menus (pages
58 and 101).
Display the menus.
Press C/D to display the menu for the
current mode on page 58 (in scene mode, a MODE
1
tab will be displayed).
Select a tab.
Press Fnꢀ to highlight the tab
2
for the current menu and
press + or – to highlight the
key custom options tab (page
127) or the setup tab (page
128). Press Fn2 to place the
cursor in the selected tab.
1
2
Key custom options
tab
Setup tab
1
2
Select a menu item.
3
4
Press + or – to highlight a
menu item and press Fn2
to display options for the
highlighted item.
Select an option.
Press + or – to highlight an option and press
C/D to select and exit (the procedure may
differ for some items; see the page for the item).
ꢀ2ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
The key custom options tab contains the following
options.
Option
Default
—
Page
129
131
132
Option
ADJ Shutter
Confirmation
Set Fnꢀ Button
Set Fn2 Button
Default
Page
135
136
Reg. My Settings
Recall My Settings
Edit My Settings
Off
—
AF/MF
—
ManualꢀFlash 136
My Settings for Fn
Settings
Off
Off
133
133
+/– Button Settings ExposureꢀComp. 137
My Settings WB Comp.
Playback Mode Dial
Options
Setting1
138
ADJ Lever Setting ꢀ WhiteꢀBalance 134
M Mode Dial Options
One Press M Mode
Setting1
138
ADJ Lever Setting 2
ADJ Lever Setting ꢁ
ISO
134
134
AprtrꢀPriority 138
Quality
ADJ Lever Setting ꢂ ImageꢀSettings 134
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 2ꢅ
The setup tab contains the following options:
Option
Default Page
Option
Default Page
Format [Card]
—
139 Level Setting
Display
144
Format [Internal
Memory]
Grid Guide Display
Options
—
139
144
LCD Brightness
—
139 Fn Button Display
On
Off
145
145
DIRECT Screen
Transparency
Show My Setting Name
Normal
140
Shooting Info. Display
Off
On
145
146
Exposure/Flash Comp.
Step
Frame
1/3EV
140
CL-BKT Black & White
ISO Auto-High Settings AUTOꢀ400 140 (TE)
AF Auxiliary Light
Sleep Mode
On
140 Color Space Set
sRGB
146
147
5ꢀminutes 141 Digital Zoom Image
Normal
Auto Power Off
Playback Screen
LCD Auto Dim
5ꢀminutes 141 Store Menu Cursor
Off
147
Position
LCD
On
141
142
Card Sequence No.
Date Settings
On
148
149
—
LCD Confirmation Time 0.5ꢀseconds 142
(Varies*) 149
(Varies*) 149
Language/L
Video Out Mode
HDMI Output
Operation Sounds
All
142
Volume Settings
142
(medium)
9.8ꢀ×
AUTO
Body
149
150
One Press Zoom Ratio
Auto Rotate
143
143
Start Settings Readout
On
*ꢀ Variesꢀwithꢀcountryꢀorꢀregionꢀofꢀpurchase.
Minimum Shooting
Distance
Show
144
Cautions
• The options displayed in the key custom options tab and
setup tab may differ depending on whether the camera unit is
attached to the camera body.
• The options displayed in the key custom options tab and setup
tab may differ depending on the camera unit.
ꢀ2ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Custom Options
Reg. My Settings
Settings saved using Reg. My Settings can be
recalled by rotating the mode dial to MYꢀ, MY2, or MYꢁ,
allowing you to easily create and recall up to six sets of
frequently-used shooting settings.
Adjust settings.
Set the camera to the desired settings. The following is
1
some of the settings that can be saved in MY settings:
• Camera settings: Shooting mode (5, P, A, S, M, or
4 mode), zoom position (in 4 mode),
aperture (in A and M modes), shutter speed (in S
and M modes), manual focus, macro, flash, self-
timer and display modes.
• Shooting menu options: All options except Interval
Shooting, Auto Aperture Shift, and Switch
Shooting Mode. White balance compensation can
be assigned if My Settings WB Comp. is on (page
133).
• Setup options: Set Fnꢀ Button/Set Fn2 Button (if
My Settings for Fn Settings is on; see page 133),
+/– Button Settings, ISO Auto-High Settings,
Exposure/Flash Comp. Step, Minimum Shooting
Distance, Level Setting, Grid Guide Display
Options, Shooting Info. Display Frame, CL-BKT
Black & White (TE), and Digital Zoom Image.
Note
The settings that can be saved in MY settings differ depending
on the camera unit. See the documentation provided with the
camera unit for details.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. 29
Select Reg My Settings.
Highlight Reg. My Settings in
the key custom options tab,
and press Fn2.
2
3
Save settings.
To assign the settings to MYꢀ,
MY2, or MYꢁ on the mode dial,
highlight MY1, MY2, or MY3,
and press C/D (to exit
without saving settings, press
the DISP. button).
To save the settings to a “box”
to be recalled and assigned
to the mode dial at a later
date (page 131), select My
Settings Box and press Fn2.
Highlight the desired box
and press C/D.
Unnamed boxes will be
named using the current
date. If the box has already
been assigned a name, the
dialog shown at right will be
displayed. Select Yes to use
the current name, No to use
a name based on the current
date.
ꢀꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Recall My Settings
Copy settings from a “box”to MYꢀ, MY2, or MYꢁ.
Select Recall My Settings in the key custom options tab,
press Fn2, and follow the steps below.
Select a destination.
1
Highlight the destination
for the stored settings (MY1,
MY2, or MY3) and press Fn2.
Select the source.
2
Highlight the settings that
will be assigned to the
selected position on the
mode dial and press C/
D.
To exit without assigning settings to the mode dial,
press the DISP. button.
Caution
If Edit My Settings is used to edit boxes that are currently
assigned to the mode dial, the changes will be reflected when
the mode dial is rotated to the position assigned to the box.
Changes to settings assigned directly to MYꢀ, MY2, or MYꢁ are not
however reflected in the boxes currently assigned to the mode
dial, and if the boxes are subsequently changed, these changes
will not be reflected in the settings assigned to MYꢀ, MY2, or MYꢁ.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢁꢀ
Edit My Settings
Edit and rename settings saved with Reg. My Settings.
Select Edit My Settings in the key custom options tab,
press Fn2, and follow the steps below.
Select a setting.
To edit the settings assigned
to MYꢀ, MY2, or MYꢁ on the
mode dial, highlight MY1,
MY2, or MY3 and press Fn2.
1
To edit “box”settings, select
My Settings Box and press
Fn2. Highlight the desired box
and press Fn2.
Edit settings.
Press + or – to highlight items
2
and press Fn2 to edit (see the
section for each item in this
manual for more information).
After editing each item, press
Fnꢀ to return to the settings
list, where you can edit
additional settings.
Save changes and exit.
Press C/D to save changes and exit (to exit
without saving changes, press the DISP. button).
3
ꢀꢁ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip:NamingMySettings
Name area
Select Name in step 2 to rename
the setting. The current name is
highlighted in the name area; to edit
the current name, press Fnꢀ or Fn2
to position the cursor in the name
area and press – to place the cursor
in the keyboard area (to delete the
current name, press – while the name
is highlighted). Highlight characters
Keyboard area
using +, –, Fnꢀ, or Fn2, and press C/D to enter the
highlighted character at the current cursor position (to delete the
character at the current cursor position, select [Delete]). Press the
t button to switch between upper and lower case. Names can
be up to 32 characters long. Press the ADJ. lever to exit, or press
the DISP. button to exit without renaming the settings.
My Settings for Fn Settings
Select On to save the settings assigned to the Fn buttons
(page 136) to MY settings saved in Reg. My Settings.
My Settings WB Comp.
Select On to save the white balance compensation
setting (page 89) to MY settings saved in Reg. My
Settings.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢁꢁ
ADJ Lever Setting
Assign up to four frequently-used options to the ADJ.
lever for quick access in 5, P, A, S, and M modes. At
default, the ADJ. lever can be used for white balance
(page 86), ISO setting (page 90), picture quality
(page 61), and image setting (page 71). The following
functions can also be assigned; white balance
compensation (page 89), focus (page 64), metering
(page 70), continuous (page 73), bracketing (page 75),
flash compensation (page 78), manual flash amount
(page 79), and exposure compensation (page 85).
In 4 mode, the ADJ. lever can be used to select
white balance and exposure compensation (exposure
compensation is not available for Movie mode).
ꢀꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
UsingtheADJ. Lever
To select an option currently assigned to the ADJ. lever:
Display options.
Press the ADJ. lever in shooting mode, and press the
lever to the left or right, or press Fnꢀ or Fn2 to view
1
the options assigned to the lever.
Setting 1
Setting 2
Setting 4
Setting 3
Select an option.
Press + or – to highlight an option, and press the ADJ.
lever or press C/D.
2
Tip
Press and hold the ADJ. lever to page rapidly through the available
options.
ADJ Shutter Confirmation
Select On to use the shutter-release button to select the
highlighted option in the ADJ. mode.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢁꢃ
Set Fn1/Fn2 Button
Choose the functions assigned
to the Fnꢀ and Fn2 buttons with
Set Fn1/Fn2 Button in the key
custom options tab.
The following is some of the functions that can be
assigned to the Fnꢀ and Fn2 buttons.
Option
Description
Switch between multi AF or spot AF and manual focus
(page 64).*1, 3
AF/MF
Switch between multi AF or spot AF and snap focus (page
64).*4
Lock exposure.*2, 5
AF/Snap
AE Lock
If options other than RAW is selected for Picture Quality/
JPEG>RAW*10 Size, pressing the Fn button selects a RAW option with the
same aspect ratio (page 61).*5, 6
Color>B&W
Color>TE
Select Black & White for Image Settings (page 71).*7
Select B&W (TE) for Image Settings (page 71).*7
Exposure Comp. Display the exposure compensation slider (page 85).*5
White Balance Display white balance options (page 86).
Display white balance compensation controls (page
WB Correction
89).*9
ISO
Display ISO sensitivity options (page 90).*7
Display picture quality/size options (page 61).
Display focus options (page 64).*4
Quality
Focus
Image Settings Display image setting options (page 71).*7
Expo. Metering Display exposure metering options (page 70).*7
Cont. Mode
Display continuous shooting options (page 73).*8
Auto Bracket Display bracketing options (page 75).*8
Macro Target Position the focus target in macro mode (page 68).*3
Flash Comp.
Display the flash compensation slider (page 78).*4, 5
ꢀꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Description
Flash Amount Adjust manual flash output (page 79).*8
1
*
If focus is locked in autofocus mode (page 64), selecting manual focus
sets the focus distance to the distance at which focus is locked.
Exposure cannot be locked in mode M. Pressing the Fn button in mode
M sets shutter speed and aperture to values close to those needed for
optimal exposure.
2
3
*
*
Not available when Portrait, Sports, Landscape or Nightscape is
selected in 4 mode.
4
5
6
7
8
9
*
*
*
*
*
*
*
Not available when Landscape is selected in 4 mode.
Not available when Movie is selected in 4 mode.
Not available when Skew Correction is selected in 4 mode.
Not available in 4 mode other than Skew Correction.
Not available in 4 mode.
Not available in 4 mode other than Movie.
10 The image sizes of the files switched to RAW differ depending on the
settings selected in Picture Quality/Size.
Settings in Picture Quality/Size
Sizes in RAW Data
L (16:9), M (16:9), 5M, 3M, 1M, VGA RAW (16:9)
L (4:3), M (4:3)
L (3:2), M (3:2)
L (1:1), M (1:1)
RAW (4:3)
RAW (3:2)
RAW (1:1)
By default, AF/MF is assigned to the Fnꢀ button and Flash
Amount to the Fn2 button.
+/– Button Settings
Choose the functions to assign to the + and – buttons.
Choose from Off, Flash Comp. (page 78), Flash Amount
(page 79), and Exposure Compensation (page 85).
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢁꢅ
Playback Mode Dial Options/M Mode Dial Options
Choose the functions to assign to the ADJ. lever and up-
down dial for playback zoom and in mode M.
Playback Mode Dial Options
M Mode Dial Options
Setting1
Setting2
Setting1
Setting2
ADJ. Next/previous
Scroll left/right Shutter speed
Aperture
lever
frame
Up-
Scroll up/
Aperture
down
down Zoom in/out
dial
Shutter speed
One Press M Mode
When exposure compensation is assigned to the + and
– buttons (page 137) or AE lock is assigned to the Fnꢀ
and Fn2 button (page 136), pressing the assigned button
in manual exposure mode sets shutter speed and/or
aperture to values close to those needed for optimal
exposure. Select a setting from the following options.
• Aprtr Priority: Aperture remains at the selected value;
shutter speed is adjusted for optimal exposure.
• Shttr Priority: Shutter speed remains at the selected
value; aperture is adjusted for optimal exposure.
• Program: Both aperture and shutter speed are
adjusted for optimal exposure.
Note
In manual exposure mode, exposure compensation cannot
be performed with the + and – buttons, nor can AE lock be
performed with the Fn buttons.
ꢀꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Format [Card]/Format [Internal Memory]
Select Format [Card] to format the memory card before
first use, after using it in another device, or if a card error
is displayed when the card is inserted in the camera
body. Select Format [Internal Memory] if a message is
displayed prompting you to format internal memory.
Cautions
• Formatting permanently deletes all data on the card or in
internal memory. Before formatting, copy any data you wish to
keep to a computer (page 151).
• Selecting Format [Card] when no memory card is inserted
displays an error message. Turn the power off and insert a
memory card.
Tip:WriteProtection
To prevent memory cards from being formatted, slide the write-
protect switch to the“LOCK”position (page 16). Restore the
switch to its original position to resume normal operation.
LCD Brightness
Selecting this option displays
the control shown at right. Press
+ or – to adjust picture display
brightness, and press C/D
to return to the setup menu.
Press C/D again to exit to
shooting or playback mode.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢁ9
Note
The brightness display shows the view through the lens
(shooting mode) or the most recently viewed picture (playback
mode; if no picture is available for playback, no image will be
shown in the brightness display).
DIRECT Screen Transparency
Choose the density of the background image displayed
on the DIRECT screen from Dark, Normal, Light, or
Image OFF.
Exposure/Flash Comp. Step
Choose the step value for the exposure compensation
and flash compensation. Choose from the value of
1/2EV or 1/3EV.
Note
In the shutter priority mode, step value is set to 1/3EV even if
1/2EV is selected for Exposure/Flash Comp. Step.
ISO Auto-High Settings
Choose the maximum sensitivity selected by the camera
when Auto-Hi is selected for ISO Setting in the shooting
menu (page 90). Choose from settings of ISO 200 (AUTO
200), 400 (AUTO 400), 800 (AUTO 800), 1600 (AUTO
1600) or 3200 (AUTO3200).
Note
Noise (random variations in brightness and color) may appear in
photographs taken at high sensitivities.
AF Auxiliary Light
If On is selected, the AF auxiliary light will light to assist
the focus operation when the subject is poorly lit.
ꢀꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Mode
Choose the delay before the picture display enters
sleep mode. Choose from Off, 1 minute, 5 minutes or
30 minutes. Autofocus/flash lamp lights in sleep mode.
Press any button to cancel the sleep mode.
Cautions
• The camera body does not enter sleep mode when:
• Shooting, playback, key custom optins or setup menu is
displayed.
• The camera body is turned on by pressing the 6 button with
the power switch at OFF position.
• The lens of camera unit is not retracted in the sleep mode.
Auto Power Off
Choose the delay before the camera turns off
automatically to save power when no operations are
performed. Select from Off (the camera does not turn off
automatically), 1 minute, 5 minutes, and 30 minutes.
Note
When Sleep and Auto Power Off are set, Auto Power Off works
after the specified time for Sleep has elapsed.
Playback Screen
Choose the screen to display playback images from LCD
(picture display) or VF (viewfinder) for when the LCD
viewfinder (VF-2) is attached to the camera body.
When the viewfinder is not attached, the playback
images are displayed in the picture display regardless of
the setting for Playback Screen.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢂꢀ
LCD Auto Dim
If On is selected, the picture display dims to save power
when the camera is not moved for approximately five
seconds in shooting mode. Move the camera or press any
button to return to the original picture display brightness.
LCD Confirmation Time
Choose how long photographs are displayed in the
picture display immediately after shooting. Select from
0.5, 1, 2, and 3seconds, Hold (photograph is displayed
until shutter-release button is pressed halfway and can
be viewed with playback zoom or deleted; see pages 38
and 39), and Off (photographs are not displayed in the
picture display after shooting).
Operation Sounds
Choose when the camera plays a sound.
Option
Description
Sounds are played at startup, when the shutter is released,
when the camera focuses, and when an error occurs. If Sound
or Disp + Snd is selected for Level Setting (page 32), the camera
will also beep at regular intervals when the camera is level.
All
Level
If Sound or Disp + Snd is selected for Level Setting, the camera
Sound will beep at regular intervals when the camera is level.
Sounds are played when the shutter is released or an error
Shutter
occurs. If Sound or Disp + Snd is selected for Level Setting, the
Sounds
camera will beep at regular intervals when the camera is level.
Volume Settings
Select the volume for the sounds described in
“Operation Sounds.”Choose from
(low), (medium), and
(off),
(high).
ꢀꢂ2
Download from Www.Somanuals.com. All Manuals Search And Download.
One Press Zoom Ratio
Select the magnification at which pictures are displayed
when zoomed in using the C/D button or ADJ.
lever (page 38). Choose from 5.7×, 9.8×, and 16×.
Notes
• Maximum magnification ratio differs depending on the image
size (page 38).
• If the maximum magnification ratio of an image size is smaller
than the setting specified in One Press Zoom Ratio, the image
can be magnified at the maximum ratio for the image size
(page 38).
Auto Rotate
Select On to automatically display pictures in the correct
orientation during playback.
Caution
Movies, pictures taken using M-Cont Plus (page 73), and pictures
taken with the camera upside down or tilted sharply forward or
back are not rotated for display. Pictures are not rotated when
the camera unit is not attached to the camera body, during
slide shows, in multi-frame playback, or when displayed on a TV,
nor are they rotated when the camera is upside down or if the
camera is rotated during playback zoom or while skew correction
is in progress.
Note
During bracketing or when taking pictures using Continuous,
the camera only records the orientation for the first photograph
in each series. The remaining photographs will not be displayed
in the correct orientation if the camera was rotated during
shooting.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢂꢁ
Minimum Shooting Distance
Select Show to display the minimum shooting distance
in the picture display.
Level Setting
The camera uses a tilt indicator and sounds to let you
know whether the image is level during shooting.
Choose tilt indicator settings (page 32).
Grid Guide Display Options
Choose the type of framing grid available in shooting
mode (page 42).
Item
Description
A
three-by-three grid for “rule of thirds”
composition.
A four-by-four grid with diagonal lines running
from corner to corner makes it easy to find the
center of the subject. Use for architectural
photography or photographing products for
display.
A two-by-two grid with the center of the frame
left clear to make it easier to view the subject.
Use if your subject is in motion.
ꢀꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Fn Button Display
4:3 N
Select On to display the options
currently assigned to the Fn
buttons when the camera is
turned on, shooting mode is
selected, or a new mode is
selected with the mode dial.
Show My Setting Name
4:3
N
Select On to display the name
of the settings assigned to the
current position on the mode dial
when the dial is rotated to MYꢀ,
MY2, or MYꢁ.
2010
Shooting Info. Display Frame
4:3
N
Select On to display shooting
icons in a frame surrounding
the view through the lens (page
8), making it easier to frame
photographs in the picture
display. The frame is not displayed
in movie mode.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢂꢃ
CL-BKT Black & White (TE)
Choose the number and type of copies created with
color bracketing (page 77). Select On to record three
copies of each shot (one in black and white, a second
in color, and a third using a monochrome tint), Off
to record two copies (one in black and white and the
second in color).
Note
Regardless of the selected setting, three copies of each
photograph will be recorded if B&W (TE) is selected for Image
Settings.
Color Space Setting
Choose the color space used to record photographs.
sRGB is widely used to reproduce digital images but
offers a smaller gamut of colors than AdobeRGB.
Caution
The Adobe RGB color space was developed by Adobe Systems,
Inc., and is compatible with the default color space used in
Adobe Photoshop and other image editing software. Note,
however, that colors will only be reproduced correctly in
software that supports the Adobe RGB color space. Also note
that specialized equipment is required to print the full range of
colors in the Adobe RGB gamut; when printed using consumer
household printers or digital photo print services, colors will
generally be less vivid than in photographs that use the sRGB
color space.
ꢀꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Zoom Image
Choose how the image taken using the digital zoom will
be saved.
• Normal: Normal digital zoom. It crops a portion of
an image and enlarges the portion back to the size
selected in Picture Quality/Size, resulting in lower
image quality.
• Auto Resize: It crops a portion of an image and save
the image in the cropped size. It keeps from decreasing
the image quality, however, the image size becomes
smaller. The sizes of cropped image differ depending
on the zoom ratio. See the documentation provided
with the camera unit.
Auto Resize zoom is available only when 4:3 for L is
selected for Picture Quality/Size (page 61).
The current picture size is
4:3 N
displayed in the picture display
when the camera is zoomed in.
Caution
Auto Resize has no effect when M-Cont Plus or Skew
Correction is selected in 4 mode, or when RAW is selected
for Picture Quality/Size.
Store Menu Cursor Position
If On is selected, the most-recently accessed item will be
highlighted when menus are displayed.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢂꢅ
Card Sequence No.
Choose how the camera names image files when saving
photographs to a memory card.
• On: File names consist of “R”followed by a seven-digit
number (e.g., “R0010001.jpg”), assigned in ascending
order from 0010001 to 9999999. When a new memory
card is inserted, file numbering continues from the last
number used.
• Off: File names consist of “RIMG”followed by a four-
digit number (e.g., “RIMG0001.jpg”), assigned in
ascending order from 0001 to 9999. When a new
memory card is inserted, file numbering is reset to
0001.
Notes
• This option applies only to memory cards. The names of
Photographs in internal memory consist of“RIMG”and a four-
digit number.
• Photographs copied to a computer using DL-10 (page 151) are
given new names consisting of“RIMG”and a four-digit number.
• Photographs taken with AdobeRGB selected for Color Space
Setting (page 146) are indicated by file names beginning with
an underscore (e.g., “_R010001.jpg”or“_RIMG001.jpg”).
Caution
When On is selected, no further photographs can be stored if the
memory card contains a folder numbered 999 and a file name
ending in 9999; when Off is selected, no further photographs
can be stored if the memory card contains a file numbered 9999.
To take additional Photographs, format the card after copying its
contents to a computer.
ꢀꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Date Settings
Set the camera clock (page 20).
Note
If you leave the battery in the camera body for at least two hours,
the battery can be removed for about a week without resetting
the clock.
Language/L
Choose the language in which camera messages and
menus are displayed.
Option
Description
Japanese
Option
Русский
Description
Russian
English
English
German
French
Italian
Simplified Chinese
Traditional Chinese
Korean
Deutsch
Français
Italiano
Español
Thai
Spanish
Video Out Mode
When connecting the camera body to a TV or VCR
(page 118), choose a video out mode that matches the
standard used in the device. The camera body supports
NTSC and PAL; SECAM is not supported.
HDMI Output
Choose the resolution of image output using an HDMI
mini cable. Choose the setting from AUTO or Manual.
Note
Normally, select AUTO. If the resolution of image displayed on TV
is low with the Auto setting, select Manual. The image may be
improved.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢂ9
Start Settings Readout
When the camera turns off, the settings are saved both
in camera body and camera unit.
Choose the destination to read out the settings from
Body or Camera Unit.
ꢀꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Pictures to a Computer
This section describes how to copy pictures from
the camera body to your computer. Instructions for
Windows may be found below; those for the Macintosh
begin on page 162.
Note
The dialogs shown in this section may differ from those displayed
by your computer.
Windows
You can copy pictures to your computer by either of the
following methods:
• Install the supplied DL-10 software (page 153) and use
it to copy pictures as described on page 159.
• Copy pictures without using DL-10 or other image
copy software. (page 160).
Note
Detailed instructions may be found in the Software User Guide on
the supplied CD (page ix).
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢃꢀ
System Requirements
Before using the supplied CD, check that your
computer meets the following requirements. See the
documentation provided with your computer for details.
Windows 2000 Professional SP 4, Windows XP Home
Edition/Professional SP 3, Windows Vista SP 2
OS
Windows 2000/Windows XP: Pentium® lll 500MHz or faster
Windows Vista: Pentium® lll 1GHz or faster
CPU
Windows 2000/Windows XP: 256MB or more
Windows Vista: 512MB or more
RAM
Free disk space A minimum of 160MB required for installation
Video
1024×768 pixels or more with 16-bit color or better
• Compatible CD-ROM drive
• Compatible USB port
Miscellaneous
Cautions
• 64-bit operating systems are not supported. Operating
systems that have been upgraded from an earlier version are
not supported, as USB may fail to function as expected. The
supplied software may not function as expected with systems
that have been patched or updated with Service Pack releases.
• Connect the camera body directly to a built-in USB port. USB
ports added via PCI-bus or other extension boards or cards are
not supported. The camera body may not function as expected
when connected via a USB hub or keyboard.
• More RAM may be required when handling movies and other
large files.
ꢀꢃ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied CD
Inserting the supplied CD in a
CD-ROM drive displays the dialog
shown at right.
• Installing the software: Install the
following software.
DL-10: Copy pictures to the
computer in a single operation.
Irodio Photo & Video Studio: View, manage, edit pictures on
the computer. For more information, see the Help menu in
Irodio Photo & Video Studio or visit the following website:
http://www.pixela.co.jp/oem/irodio/e/irodio_digitalphoto_
videostudio/
USB driver: Connect earlier Ricoh cameras to computers
running Windows 98, Windows 98 SE, Windows Me, or
Windows 2000. Not required for this product.
WIA driver: Connect earlier Ricoh cameras to computers
running Windows XP or Windows Vista. Not required for this
product.
• Browse User’s Manual (Software Version): View the Software
User Guide in pdf format (page ix). Acrobat Reader or
Adobe Reader is required; if necessary, install Adobe
Reader as described on page 156.
• Browse CD-ROM Content: View the contents of the CD,
which include Adobe Reader (page 156). To install
Irodio Photo & Video Studio without installing other
software, open the “Irodio Photo & Video Studio”folder
and double-click Irodio Photo & Video Studio.exe.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢃꢁ
Installing the Software
Follow the steps on the next page to install the supplied
software. Illustrations are from Windows XP.
Cautions
• If the camera body is connected to the computer, disconnect
the camera body before beginning installation.
• Users of existing“Caplio”software should note that the“DC”
software supplied with the camera body replaces the following
items in the Caplio software package:
Caplio software
DC software
RICOH Gate La
DL-10
DU-10*
SR-10*
ST-10*
Caplio Viewer
Caplio Server
Caplio Setting
*Not used by this product.
If the above Caplio software is currently installed, you will be
prompted to uninstall it before installing the supplied DC
software. Follow the on-screen instructions. Installing the DC
software replaces Caplio Viewer, Caplio Server, and Caplio
Setting with the software listed above, which can be used in
the same way as the Caplio versions (note that those software
will not be installed if you uninstalled the Caplio software as
described on page 158 before installing the DC software). Note
that uninstalling the software for earlier Ricoh cameras may
reset user preferences for DL-10 or RICOH Gate La.
• Administrator privileges are required for installation.
• DL-10 is for use in a stand-alone environment and cannot be
run over a network.
ꢀꢃꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert the supplied CD.
1
Turn the computer on and
insert the supplied CD in a
CD-ROM drive.
• Windows Vista: An Autorun
dialog will be displayed.
Click Run Autorun.exe to
display the installer dialog.
• Other versions of Windows: The installer dialog will be
displayed automatically.
Click Installing the software.
2
3
• Windows Vista: A “User Account Control”dialog will
be displayed. Click Allow to display a language-
selection dialog.
• Other versions of Windows: A language-selection
dialog will be displayed.
Select a language and click OK.
The dialog shown at right will
be displayed. Click Next.
Select a destination.
4
The supplied software will be
installed to the folder shown
under Destination Folder.
Click Next.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢃꢃ
Confirm the destination location and then click [Next].
The Irodio Photo & Video
Studio installer will start
5
(depending on your
computer, the splash screen
at right may be displayed for
some time before installation begins). Follow the on-
screen instructions to install the supplied software.
Click Finish.
6
7
The dialog shown at right will
be displayed when installation
is complete. Click Finish.
Restart the computer.
A message will be displayed
prompting you to restart your
computer. Select Yes, I want to restart my computer
now and click Finish to restart the computer.
Unblock DL-10.
A Windows security dialog will be displayed when
the computer restarts. Click Unblock for DL-10.
8
Note
See page 158 for information on uninstalling the software.
Installing Adobe Reader
Adobe Reader is required to view the Software User
Guide. If Adobe Reader is not already installed, it can be
installed from the supplied CD as described below.
Cautions
• Disconnect the camera body before beginning installation.
• Administrator privileges are required for installation.
ꢀꢃꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert the supplied CD.
1
Turn the computer on and
insert the supplied CD in a
CD-ROM drive.
• Windows Vista: An Autorun
dialog will be displayed.
Click Run Autorun.exe to
display the installer dialog.
• Other versions of Windows: The installer dialog will be
displayed automatically.
Click Browse CD-ROM Content.
The contents of the CD will be displayed.
2
3
Install Adobe Reader.
Double-click the “Adobe Reader”folder and then
double-click the folder for the language of your
choice. Double-click the file beginning with
“AdbeRdr910”and follow the on-screen instructions.
If a “User Account Control”dialog is displayed, click
Continue.
Notes
• See the Adobe Reader Help menu for information on Adobe
Reader.
• Installation of Adobe Reader 9.1 requires MSI (Microsoft
Windows Installer) version 3.1 or later and either Microsoft
Internet Explorer 6.0 or later or Firefox 2.0 or later. Microsoft
Internet Explorer and Microsoft Windows Installer are available
via Microsoft Update.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢃꢅ
Uninstalling the Software
Follow the steps below to uninstall DC software or Irodio
Photo & Video Studio.
Cautions
• Administrator privileges are required for uninstallation.
• Exit any applications that may be running before proceeding.
Open the “Add/Remove Programs” Control Panel.
Open the Windows “Start”menu and select Control
Panel (Windows XP or Windows Vista) or Settings >
Control Panel. Double-click Add/Remove
Programs.
1
Uninstall the software.
Select the software you wish to uninstall (DC
2
Software or Irodio Photo & Video Studio) and click
Change/Remove. A confirmation dialog will be
displayed; click OK. If a message appears warning
that a shared file has been detected, select Don’t
display this message again and click Yes.
Close any open windows when the uninstall process
is complete. After uninstalling Irodio Photo & Video
Studio, restart the computer.
ꢀꢃꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying Pictures Using DL-10
After installing DC software, follow the steps below to
copy pictures to your computer.
1 Turn the camera body off.
Connect the supplied USB cable.
Connect the cable to the
computer USB port.
2
Cautions
• Do not use force when
connecting the cable or when
handling the camera body with
the cable connected.
• Do not move the camera body with the cable connected.
Connect the cable to the
camera body as shown. The
camera body will turn on, DL-
10 will start, and transfer will
begin automatically. Pictures
are copied to folders in the
“Digital Camera”folder in “My Documents”(if you were
previously using Caplio software, pictures will instead
be copied to folders in the “Caplio”folder). Pictures are
sorted into separate folders by date of recording; make
sure the camera clock is set to the correct date and time
before shooting.
Disconnect the cable when transfer is complete.
See page 161 for more information.
3
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢃ9
Note
If transfer does not begin automatically, try the following procedures.
Click Save in the DL-10 window.
Check that Saves automatically when connected to USB is
selected in the DL-10“Option Settings”dialog.
Restart the computer and repeat the above steps.
Copying Pictures Without Using DL-10
If DL-10 is not installed, you can copy pictures to the
computer as described below. The illustrations in this
section are from Windows XP.
1 Turn the camera body off.
Connect the supplied USB cable.
Connect the cable to the computer USB port and
then to the camera body. The camera body will turn
on automatically.
2
Copy files from the camera body to the computer.
The camera body will
be listed as a removable
3
drive in “My Computer”
with pictures stored
in folders as shown at
right. If a memory card
is inserted in the camera
body, the drive will be
named as shown at right and the contents of the
memory card will be displayed. If no memory card
is inserted, the drive will be named “RICOHDCI”and
the contents of internal memory will be displayed.
Copy pictures to the desired location on your
computer.
ꢀꢄ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions
• Do not turn the power off or disconnect the USB cable until
copying is complete.
• Files in the destination folder with the same name as the pictures
being copied will be overwritten. If necessary, rename files before
copying begins.
• Do not use a computer to view or edit pictures on a memory
card. Pictures that have been viewed or modified on a
computer can no longer be displayed on the camera body.
Copy pictures to the computer for viewing and editing.
Disconnecting the Camera Body
Before disconnecting the camera
body from the computer, click the
“Safely Remove Hardware”or “Unplug or Eject Hardware”
icon in the taskbar (the illustration above shows the icon
for Windows XP) and select Safely Remove USB Mass
Storage Device or Stop USB Mass Storage Device from
the menu that appears. You can then disconnect the
USB cable.
Notes
• A warning may be displayed if the USB cable is disconnected
without first removing the camera body from the system as
described above. Be sure to remove the camera body from the
system before disconnecting the cable.
• Confirm that transfer is complete before removing the camera
body from the system and disconnecting the cable.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢄꢀ
Macintosh
The camera body can be used with Mac OS X versions
10.4–10.5.7.
Caution
The VM-1 software (page 164) and Software Users Guide (only on
computers with Acrobat installed) can be used with Macintosh
computers.
Copying Pictures to a Macintosh
1 Turn the camera body off.
Connect the supplied USB cable.
Connect the cable to the
computer USB port.
2
Cautions
• Do not use force when
connecting the cable or when
handling the camera body with
the cable connected.
• Do not move the camera body with the cable connected.
Connect the cable to the
camera body as shown. The
camera body will turn on
automatically.
ꢀꢄ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy files from the camera body to the computer.
The camera body will
appear as a volume on
3
the desktop with pictures
stored in folders as shown
at right. If a memory
card is inserted in the
camera body, the drive
will be named as shown
at right and the contents of the memory card will
be displayed. If no memory card is inserted, the
drive will be named “RICOHDCI”and the contents of
internal memory will be displayed. Copy pictures to
the desired location on your computer.
Disconnecting the Camera Body
Before disconnecting the camera body from the
computer, drag the camera body volume into the Trash
or select the camera body volume and choose Eject
from the File menu. You can then disconnect the USB
cable.
Notes
• A warning may be displayed if the USB cable is disconnected
without first removing the camera body from the system as
described above. Be sure to remove the camera body from the
system before disconnecting the cable.
• Confirm that transfer is complete before removing the camera
body from the system and disconnecting the cable.
• Connecting the camera body to a Macintosh computer may
result in the creation of“FINDER.DAT”or“.DS_Store”files that will
be listed by the camera body as unmatched files. These files can
be deleted without risk.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢄꢁ
Using the MP File Viewer
When you shoot images with M-Cont Plus, the images
are recorded as one MP file. By using the VM-1 MP file
viewer, you can play back MP files on your Macintosh
computer and export still images.
This section explains how to install and uninstall the
VM-1 software that is included on the supplied CD-
ROM. For details on how to play back MP files on your
computer or export still images from MP files using the
MP file viewer, see the “Software User Guide”available
from the supplied CD-ROM.
SystemRequirementsforUsingtheSuppliedMPfileviewer
The following environments are necessary for using the
supplied MP file viewer.
Please check your computer, or the computer’s user
manual.
Operating Systems Supported Mac OS X 10.4 to 10.5.7
Macintosh computer
Apple Inc. Macintosh Series
Mac OS X 10.4 256 MB or more
Mac OS X 10.5 512 MB or more
Internal Memory
Hard Disk Available Memory 5 MB or more
A CD-ROM drive compatible with the
above-mentioned Macintosh computer
CD-ROM Drive
Note
VM-1 supports Japanese, English, French and Chinese (Simplified).
ꢀꢄꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
InstallingVM-1
Insert the supplied CD.
Turn on the Macintosh computer and insert the
supplied CD in a CD-ROM drive.
1
2
Select the disk for installation.
Double-click the RICOH icon > VM-1 folder > VM-1
Installer.pkg icon. The Install VM-1 window will be
displayed; click Continue. When the window for
selecting the installation location appears, select
the disk for installation, and then click Continue.
Install VM-1.
3
Click Install and enter your name and password,
and then click OK. A message that the installation is
complete will be displayed; click Close.
To change the installation location, click Change
Install Location....
To upgrade VM-1, click Upgrade.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢄꢃ
UninstallingVM-1
Cautions
• If you have any other software applications running or data that
has not been saved, quit the other software applications and
save the data before uninstalling VM-1.
• If an error occurs during the uninstallation process, update your
Mac OS to the latest version.
Open the VM-1 utility folder.
Open the Applications folder > Utilities folder >
VM-1 Utility folder.
1
Double-click the VM-1 Uninstaller icon.
The uninstall confirmation dialog will be displayed.
Click OK.
2
Enter your name and password, and then click OK.
A message that the uninstallation is complete will
be displayed; click OK.
3
ꢀꢄꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Notes
Troubleshooting
Error Messages
If an error message is displayed, take the steps listed
below.
Message
Insertꢀcard
Solution
Page
15
Noꢀmemoryꢀcardꢀisꢀinserted.ꢀInsertꢀcard.
20,ꢀ
149
15,ꢀ
148
Setꢀdate.
Cameraꢀclockꢀisꢀnotꢀset.ꢀSetꢀcameraꢀclock.
FileꢀNumberꢀOverꢀLimit Cameraꢀisꢀoutꢀofꢀfileꢀnumbers.ꢀInsertꢀanotherꢀcard.
Cameraꢀcannotꢀdisplayꢀfile.ꢀUseꢀcomputerꢀtoꢀcheckꢀfileꢀcontentsꢀ
UnmatchedꢀFile
andꢀdeleteꢀfile.
—
15
Insufficientꢀmemory.ꢀ Spaceꢀ onꢀ memoryꢀ cardꢀ isꢀ insufficientꢀ toꢀ copyꢀ allꢀ files.ꢀ Insertꢀ
Continue?
Protected
anotherꢀcard.
Fileꢀisꢀprotectedꢀandꢀcannotꢀbeꢀdeleted.
112
16
CardꢀIsꢀWrite-Protected. Cardꢀisꢀwriteꢀprotectedꢀ(locked).ꢀUnlockꢀcard.
Printꢀsettingsꢀcannotꢀbeꢀ
Fileꢀisꢀaꢀmovieꢀorꢀotherꢀfileꢀthatꢀcannotꢀbeꢀselectedꢀforꢀprinting.
—
setꢀforꢀthisꢀfile.
Insufficientꢀmemoryꢀtoꢀstoreꢀadditionalꢀfiles.ꢀDeleteꢀexistingꢀfilesꢀ 39,ꢀ
InsufficientꢀMemory/ orꢀincreaseꢀamountꢀofꢀmemoryꢀavailable.
139
Capacityꢀshort
Maximumꢀnumberꢀofꢀimagesꢀselectedꢀforꢀprinting.ꢀSetꢀnumberꢀofꢀ
printsꢀforꢀotherꢀimagesꢀtoꢀzero.
125
Formatꢀinternalꢀ
memory.
Formatꢀcard.
CardꢀError
Internalꢀ memoryꢀ isꢀ notꢀ correctlyꢀ formatted.ꢀ Formatꢀ internalꢀ
memory.
Cardꢀisꢀnotꢀcorrectlyꢀformatted.ꢀFormatꢀcardꢀinꢀcameraꢀbody.
139
139
Formatꢀcard.ꢀIfꢀmessageꢀpersists,ꢀcardꢀisꢀfaulty;ꢀdiscontinueꢀuse. 139
WritingꢀData
NoꢀFile
Cameraꢀisꢀsavingꢀdata.ꢀWaitꢀuntilꢀsaveꢀisꢀcomplete.
Noꢀfilesꢀavailableꢀforꢀplayback.
—
—
Memoryꢀisꢀfull.ꢀUseꢀanotherꢀcardꢀorꢀremoveꢀcardꢀandꢀuseꢀinternalꢀ
memory.
CannotꢀRecord
15
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢄꢅ
Camera Body-Related Problems
PowerSupply
Problem
Cause
Solution
Page
Checkꢀ thatꢀ batteryꢀ isꢀ correctlyꢀ
Batteryꢀ isꢀ exhaustedꢀ orꢀ notꢀ
inserted.
inserted.ꢀ Chargeꢀ
batteryꢀ12,ꢀ14
Theꢀcameraꢀdoesꢀ
notꢀturnꢀon.
(rechargeableꢀbatteryꢀonly).
Useꢀsuppliedꢀbattery.
Batteryꢀisꢀincompatible.
13
14
Batteryꢀ isꢀ notꢀ inꢀ correctꢀInsertꢀ batteryꢀ inꢀ correctꢀ
orientation.
orientation.
Cameraꢀ hasꢀ turnedꢀ offꢀ
automaticallyꢀtoꢀsaveꢀpower.
Turnꢀcameraꢀon.
18
Theꢀcameraꢀturnsꢀ
offꢀduringꢀuse.
Chargeꢀ batteryꢀ (rechargeableꢀ
batteryꢀonly).
Useꢀsuppliedꢀbattery.
Batteryꢀisꢀexhausted.
Batteryꢀisꢀincompatible.
Cameraꢀmalfunction.
12
13
14
Theꢀcameraꢀdoesꢀ
notꢀturnꢀoff.
Removeꢀandꢀreinsertꢀbattery.
Lowꢀbatteryꢀ
indicatorꢀdisplayedꢀ
orꢀcameraꢀturnsꢀoffꢀ Batteryꢀisꢀincompatible.
whenꢀbatteryꢀhasꢀ
Useꢀsuppliedꢀbattery.
13
chargeꢀremaining.
Batteryꢀcannotꢀbeꢀ Batteryꢀ hasꢀ reachedꢀ endꢀ ofꢀ
Replaceꢀwithꢀaꢀnewꢀbattery.
14
—
—
charged.
chargingꢀlife.
Ambientꢀtemperatureꢀisꢀveryꢀhighꢀ
—
—
Batteryꢀisꢀquicklyꢀ orꢀveryꢀlow.
exhausted.
Poorꢀ lightingꢀ requiresꢀ extensiveꢀ
useꢀofꢀflash.
ꢀꢄꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting
Problem
Cause
Solution
Page
Chargeꢀ batteryꢀ (rechargeableꢀ
batteryꢀonly).
Batteryꢀisꢀexhausted.
12
SlideꢀtheꢀpowerꢀswitchꢀtoꢀONꢀtoꢀ
turnꢀ cameraꢀ onꢀ orꢀ pressꢀ 6ꢀ toꢀ18,ꢀ34
selectꢀshootingꢀmode.
Powerꢀ isꢀ offꢀ orꢀ notꢀ inꢀ shootingꢀ
mode.
Pressꢀ 6ꢀ toꢀ selectꢀ shootingꢀ
mode.
Cameraꢀisꢀinꢀplaybackꢀmode.
34
Noꢀpictureꢀtakenꢀ
whenꢀshutter-
releaseꢀbuttonꢀisꢀ
pressed.
Shutter-releaseꢀ buttonꢀ wasꢀ notꢀPressꢀ shutter-releaseꢀ buttonꢀ allꢀ
22
fullyꢀpressed.
theꢀwayꢀdown.
Memoryꢀcardꢀisꢀnotꢀformatted. Formatꢀcard.
139
Memoryꢀcardꢀisꢀfull.
Insertꢀnewꢀcardꢀorꢀdeleteꢀfiles. 15,ꢀ39
Memoryꢀcardꢀhasꢀreachedꢀendꢀofꢀ
workingꢀlife.
Insertꢀnewꢀcard.
15
29
Waitꢀ untilꢀ flashꢀ lampꢀ stopsꢀ
blinking.
Flashꢀisꢀcharging.
Memoryꢀcardꢀisꢀlocked.
Unlockꢀcard.
16
Memoryꢀcardꢀcontactsꢀareꢀdirty. Cleanꢀwithꢀsoft,ꢀdryꢀcloth.
—
Cannotꢀviewꢀ
Photographsꢀafterꢀ Displayꢀtimeꢀisꢀtooꢀshort.
shooting.
Chooseꢀlongerꢀdisplayꢀtime.
142
PowerꢀisꢀoffꢀorꢀpictureꢀdisplayꢀisꢀTurnꢀcameraꢀonꢀorꢀadjustꢀpictureꢀ 18,ꢀ
dark.
displayꢀbrightness.
139
PressꢀtheꢀVF/LCDꢀbuttonꢀtoꢀturnꢀ
pictureꢀdisplayꢀon.
DisplayꢀhasꢀbeenꢀswitchedꢀtoꢀtheꢀPressꢀtheꢀVF/LCDꢀbuttonꢀtoꢀswitchꢀ
Pictureꢀdisplayꢀisꢀ Pictureꢀdisplayꢀisꢀoff.
blank.
42
42
LCDꢀviewfinder.
A/Vꢀcableꢀisꢀconnected.
Lensꢀisꢀdirty.
toꢀtheꢀpictureꢀdisplay.
Disconnectꢀcable.
Cleanꢀwithꢀsoft,ꢀdryꢀcloth.
118
–
Cameraꢀunableꢀtoꢀ Subjectꢀisꢀnotꢀatꢀcenterꢀofꢀframe. Useꢀfocusꢀlock.
25
focusꢀinꢀautofocusꢀ Subjectꢀnotꢀsuitableꢀforꢀautofocus. Useꢀfocusꢀlockꢀorꢀmanualꢀfocus. 25,ꢀ65
Useꢀ macroꢀ modeꢀ orꢀ moveꢀ awayꢀ
fromꢀsubject.
mode.
Subjectꢀisꢀtooꢀclose.
27
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢄ9
Problem
Cause
Solution
Page
Useꢀ aꢀ tripod.ꢀ Useꢀ theꢀ cameraꢀ
Cameraꢀmovedꢀduringꢀshooting. shakeꢀ correctionꢀ function.ꢀ Pressꢀ21,ꢀ92
elbowsꢀagainstꢀyourꢀbody.
Picturesꢀareꢀ
blurred.
J
Useꢀtheꢀflash.ꢀChooseꢀhigherꢀISOꢀ 29,ꢀ
Lightingꢀ isꢀ poorꢀ andꢀ shutterꢀ
setting.ꢀ Useꢀ theꢀ cameraꢀ shakeꢀ 90,ꢀ
speedsꢀareꢀslow.
correctionꢀfunction.
92
29
PressꢀOPEN/fꢀbuttonꢀ(flashꢀopen/
setting)ꢀtoꢀopenꢀtheꢀflash.
Doꢀnotꢀobstructꢀflashꢀcover.
Flashꢀisꢀnotꢀraised.
Flashꢀcoverꢀisꢀnotꢀfullyꢀopen.
Theꢀ flashꢀ cannotꢀ beꢀ usedꢀ inꢀ theꢀ
followingꢀcases:
—
• Whenꢀexposureꢀbracket,ꢀwhiteꢀ
54,ꢀ73ꢀ
75
balanceꢀ bracket,ꢀ orꢀ colorꢀChangeꢀcameraꢀsettings.
Flashꢀdoesꢀnotꢀfireꢀ
orꢀwillꢀnotꢀcharge.
bracketꢀisꢀset
• Inꢀcontinuousꢀmode
• Inꢀmovieꢀmode
Openꢀ theꢀ flash.ꢀ Pressꢀ OPEN/fꢀ
Flashꢀisꢀoff.
29
buttonꢀ (flashꢀ open/setting)ꢀ toꢀ
cancelꢀflashꢀoff.
Chargeꢀ batteryꢀ (rechargeableꢀ
batteryꢀonly).
Batteryꢀisꢀexhausted.
12
–
Theꢀ distanceꢀ toꢀ theꢀ subjectꢀ
exceedsꢀtheꢀflashꢀrange.
Subjectꢀisꢀdark.
Flashꢀoutputꢀisꢀtooꢀlow.
Flashꢀcoverꢀisꢀnotꢀfullyꢀopen.
Moveꢀcloserꢀtoꢀsubject.
Flashꢀdoesꢀnotꢀ
illuminateꢀsubject.
Increaseꢀflashꢀoutput.
Increaseꢀflashꢀoutput.
Doꢀnotꢀobstructꢀflashꢀcover.
Reduceꢀflashꢀoutput,ꢀmoveꢀawayꢀ
78
78
—
Flashꢀoutputꢀisꢀtooꢀhigh.
fromꢀsubject,ꢀorꢀuseꢀdifferentꢀlightꢀ 78
source.
Photographsꢀareꢀ
tooꢀbright.
Useꢀ exposureꢀ compensationꢀ orꢀ
chooseꢀfasterꢀshutterꢀspeed.
Adjustꢀpictureꢀdisplayꢀbrightness. 139
Photographꢀisꢀoverexposed.
Pictureꢀdisplayꢀisꢀtooꢀbright.
50,ꢀ85
PressꢀOPEN/fꢀbuttonꢀ(flashꢀopen/
setting)ꢀtoꢀopenꢀtheꢀflash.
Flashꢀisꢀoffꢀandꢀsubjectꢀisꢀpoorlyꢀ
lit.
29
Photographsꢀareꢀ
tooꢀdark.
Useꢀ exposureꢀ compensationꢀ orꢀ
Photographꢀisꢀunderexposed.
Pictureꢀdisplayꢀisꢀtooꢀdark.
50,ꢀ85
chooseꢀslowerꢀshutterꢀspeed.
Adjustꢀpictureꢀdisplayꢀbrightness. 139
ꢀꢅ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Colorsꢀareꢀ
Cause
Cameraꢀ unableꢀ toꢀ adjustꢀ whiteꢀIncludeꢀ whiteꢀ objectꢀ inꢀ
balanceꢀ forꢀ shootingꢀ conditionsꢀPhotographꢀ orꢀ chooseꢀ anotherꢀ 86
Solution
Page
unnatural.
usingꢀautoꢀwhiteꢀbalance.
whiteꢀbalanceꢀoption.
Photographꢀ
informationꢀnotꢀ Indicatorsꢀareꢀhidden.
displayed.
PressꢀDISP.ꢀtoꢀdisplayꢀindicators. 42
Pictureꢀdisplayꢀ
AmbientꢀlightingꢀisꢀpoorꢀorꢀdiffersꢀThisꢀ isꢀ normalꢀ andꢀ doesꢀ notꢀ
brightnessꢀchangesꢀ
duringꢀfocusing.
Verticalꢀstreaksꢀ
(“smear”)ꢀappearꢀ Subjectꢀisꢀbright.
inꢀphotographs.
—
fromꢀthatꢀusedꢀforꢀautofocus.
indicateꢀaꢀmalfunction.
Thisꢀ isꢀ normalꢀ andꢀ doesꢀ notꢀ
indicateꢀaꢀmalfunction.
—
32
Offꢀ orꢀ Soundꢀ selectedꢀ forꢀ Level
Setting.
ChooseꢀDisplayꢀorꢀDisp + Snd.
Tiltꢀindicatorꢀisꢀnotꢀ
displayed.
Indicatorsꢀareꢀhidden.
PressꢀDISP.ꢀtoꢀdisplayꢀindicators. 42
Holdꢀ theꢀ cameraꢀ inꢀ theꢀ correctꢀ
Theꢀcameraꢀisꢀupsideꢀdown.
21
orientation.
Photographꢀisꢀnotꢀ Cameraꢀ wasꢀ movingꢀ whenꢀDoꢀnotꢀtakeꢀpicturesꢀfromꢀmovingꢀ
—
—
level,ꢀalthoughꢀtiltꢀ Photographꢀwasꢀtaken.
indicatorꢀshowedꢀ
objects.
thatꢀcameraꢀwasꢀ Subjectꢀisꢀnotꢀlevel.
level.
Checkꢀtheꢀsubject.
Playback/Deletion
Problem
Cause
Solution
Page
19,ꢀ34
118
Cameraꢀisꢀnotꢀinꢀplaybackꢀmode.
Pressꢀ6.
A/Vꢀcableꢀincorrectlyꢀconnected. ReconnectꢀA/Vꢀcable.
VideoꢀmodeꢀdoesꢀnotꢀmatchꢀTV. Chooseꢀanotherꢀvideoꢀmode.
Theꢀ playbackꢀ screenꢀ displaysꢀ inꢀ
SetꢀPlayback ScreenꢀtoꢀLCD.
theꢀLCDꢀviewfinder.
Cannotꢀplayꢀ
picturesꢀback.
149
141
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢅꢀ
Problem
Cause
Memoryꢀ cardꢀ emptyꢀ orꢀ notꢀ
inserted.
Solution
Page
Insertꢀ cardꢀ thatꢀ hasꢀ beenꢀ
Cardꢀwasꢀnotꢀformattedꢀinꢀcameraꢀformattedꢀ inꢀ cameraꢀ bodyꢀ andꢀ 15,ꢀ
body.
containsꢀ picturesꢀ recordedꢀ withꢀ 139
cameraꢀbody.
Cannotꢀviewꢀ
picturesꢀonꢀ
Picturesꢀwereꢀcreatedꢀwithꢀotherꢀ
device.
Memoryꢀcardꢀcontactsꢀareꢀdirty. Cleanꢀwithꢀsoft,ꢀdryꢀcloth.
Insertꢀ anotherꢀ card.ꢀ Ifꢀ youꢀ canꢀ
—
—
memoryꢀcard.
viewꢀpicturesꢀonꢀsecondꢀcard,ꢀfirstꢀ
cardꢀhasꢀprobablyꢀmalfunctioned;ꢀ
discontinueꢀuse.
Cardꢀmalfunction.
Chargeꢀ batteryꢀ (rechargeableꢀ
batteryꢀonly).
Batteryꢀisꢀexhausted.
12
Pictureꢀdisplayꢀhasꢀ
turnedꢀoff.
Cameraꢀ hasꢀ turnedꢀ offꢀ
automaticallyꢀtoꢀsaveꢀpower.
Fileꢀisꢀprotected.
Turnꢀcameraꢀon.
18
Removeꢀprotection.
112
Cannotꢀdeleteꢀfile.
Memoryꢀcardꢀisꢀlocked.
Cannotꢀformatꢀ
card.
Unlockꢀmemoryꢀcard.
16
Cardꢀisꢀlocked.
Miscellaneous
Problem
Cause
Solution
Page
Cannotꢀinsertꢀ
memoryꢀcard.
Cardꢀisꢀnotꢀinꢀcorrectꢀorientation. Insertꢀinꢀcorrectꢀorientation.
15
Chargeꢀ batteryꢀ (rechargeableꢀ
Batteryꢀisꢀexhausted.
batteryꢀonly).
12
Cameraꢀcontrolsꢀ
haveꢀnoꢀeffect.
Turnꢀ cameraꢀ offꢀ andꢀ thenꢀ onꢀ
again.
Removeꢀandꢀreinsertꢀbattery.
Setꢀ clockꢀ toꢀ correctꢀ dateꢀ andꢀ
time.
18
14
Cameraꢀmalfunction.
Dateꢀisꢀincorrect. Clockꢀisꢀnotꢀsetꢀcorrectly.
20,ꢀ149
Dateꢀhasꢀbeenꢀ
reset.
BatteryꢀhasꢀnotꢀbeenꢀinsertedꢀforꢀSetꢀ clockꢀ toꢀ correctꢀ dateꢀ andꢀ
20,ꢀ149
141
aboutꢀaꢀweek.
time.
Cameraꢀdoesꢀ
notꢀturnꢀoffꢀ
automatically.
Cameraꢀdoesꢀnotꢀ
beep.
Offꢀ isꢀ selectedꢀ forꢀ Auto Power
Off.
Chooseꢀanotherꢀsetting.
Chooseꢀ anotherꢀ optionꢀ forꢀ
Volume Settings.
Beepꢀisꢀmuted.
32,ꢀ142
ꢀꢅ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Cause
Solution
Page
149
VideoꢀmodeꢀdoesꢀnotꢀmatchꢀTV. Chooseꢀanotherꢀvideoꢀmode.
Picturesꢀareꢀnotꢀ A/Vꢀcableꢀnotꢀconnected.
TVꢀ isꢀ notꢀ tunedꢀ toꢀ VIDEOꢀ INꢀ
ConnectꢀA/Vꢀcable.
118
displayedꢀonꢀTV.
TuneꢀTVꢀtoꢀVIDEOꢀINꢀchannel.
—
channel.
Computer-Related Problems
For more information, refer to the Software User Guide,
available in pdf format on the supplied CD.
SecurityAlerts(WindowsVista/WindowsXP)
Consult the following if Windows XP Service Pack 3 or
Windows Vista Service Pack 2 displays a security alert
when the camera body is connected or DL-10 starts. The
illustrations in this section are from Windows XP.
If a security alert is displayed, confirm
that the program is from a reliable
source and click Unblock.
Caution
If you cannot identify the program and source, click Keep
Blocking to prevent your computer from being affected by virus
or malware.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢅꢁ
If you clicked Keep Blocking to block a Ricoh application, you can
remove the block in Windows Firewall.
Open the “Windows Firewall” Control Panel.
Open the “Start”menu and
select Control Panel, then
1
double-click Windows
Firewall (if Windows Firewall
is not listed, click Switch to
Classic View at the top left
corner of the Control Panel window).
Allow the Ricoh application Internet access.
In the “Windows Firewall”
2
dialog, click the Exceptions
tab and check whether DL-10
is listed under “Programs and
Services.”If it is, place a check
in the check box next to
DL-10 and click OK. If it is not
listed, click Add Program…
to add DL-10 to the list of
exceptions.
If you clicked Ask Me Later to block DL-10, a security alert will
be displayed the next time the program starts. Click
Unblock to remove the block.
ꢀꢅꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Autoꢀ(flashꢀfiresꢀwhenꢀlightingꢀisꢀpoorꢀorꢀsubjectꢀisꢀbacklit),ꢀred-eye,ꢀ
on,ꢀslowꢀsync,ꢀmanual,ꢀoff
Mode
Rangeꢀ(built-inꢀ
flash)
Flashꢀ
compensation
Manualꢀflashꢀ
Seeꢀtheꢀdocumentationꢀprovidedꢀwithꢀtheꢀcameraꢀunit.
2.0ꢀEVꢀinꢀincrementsꢀofꢀ1/2EVꢀorꢀ1/3EV
Flash
FULL,ꢀ1/1.4,ꢀ1/2,ꢀ1/2.8,ꢀ1/4,ꢀ1/5.6,ꢀ1/8,ꢀ1/11,ꢀ1/16,ꢀ1/22,ꢀ1/32,ꢀ1/64
amount
Pictureꢀdisplay
3.0˝ꢀtransparentꢀLCD;ꢀapprox.ꢀ920,000ꢀpixels
Auto,ꢀprogramꢀshift,ꢀapertureꢀpriority,ꢀshutterꢀpriority,ꢀmanual,ꢀscene,ꢀ
“MyꢀSettings”
Shootingꢀmode
Pictureꢀquality
Storage
Fine,ꢀNormal,ꢀRAWꢀ(DNG)ꢀ*1
SD/SDHCꢀmemoryꢀcard,ꢀinternalꢀmemoryꢀ(approx.ꢀ86ꢀMB)
FINE:ꢀapprox.ꢀ2287KB/frame
FINE:ꢀapprox.ꢀ1474KB/frame
FINE:ꢀapprox.ꢀ812KB/frame
FINE:ꢀapprox.ꢀ197KB/frame
5M
Fileꢀ
3M
sizeꢀ*2ꢀ
1M
(approx.)
VGA
Photographs JPEGꢀ(ExifꢀVer.ꢀ2.21)ꢀ*3,ꢀRAWꢀ(DNG)
Movies
Fileꢀ
format
AVIꢀ*4ꢀ(OpenDMLꢀMotionꢀJPEGꢀcompliant)
Compression JPEGꢀbaselineꢀcompliantꢀ(photographsꢀandꢀmovies)
Continuousꢀshootingꢀ(continuous,ꢀM-ContꢀPlus);ꢀself-timerꢀ(shutterꢀ
releaseꢀdelayꢀofꢀapprox.ꢀ10ꢀsꢀorꢀ2ꢀs,ꢀorꢀcustomꢀsetting);ꢀintervalꢀtimerꢀ
Otherꢀshootingꢀoptions (intervalsꢀofꢀ5ꢀsꢀtoꢀ1ꢀhourꢀinꢀincrementsꢀofꢀ5ꢀs)ꢀ*5;ꢀcolorꢀbracketing;ꢀ
B&Wꢀ(TE);ꢀcolorꢀspaceꢀselection;ꢀnoiseꢀreduction;ꢀhistogramꢀdisplay;ꢀ
framingꢀgrid;ꢀdepth-of-fieldꢀindicator;ꢀtiltꢀindicator;ꢀhotꢀshoe
Autoꢀimageꢀrotation;ꢀmulti-frameꢀplayback;ꢀplaybackꢀzoomꢀ(upꢀtoꢀ
Otherꢀplaybackꢀoptions
16ꢀ×);ꢀresize
USBꢀ2.0ꢀ(High-Speed)ꢀMini-Bꢀconnector;ꢀMassꢀStorageꢀ*6;ꢀaudioꢀ
outputꢀ1.0ꢀVp-pꢀ(75ꢀΩ),ꢀHDMIꢀminiꢀcableꢀconnectorꢀ(TypeꢀC)
Interface
Videoꢀsignalꢀformat
Powerꢀsource
NTSC,ꢀPAL
DB-90ꢀrechargeableꢀbatteryꢀ(3.6ꢀV)
Batteryꢀlifeꢀ(basedꢀonꢀ
Seeꢀtheꢀdocumentationꢀprovidedꢀwithꢀtheꢀcameraꢀunit.
CIPAꢀstandard)ꢀ*7
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢅꢃ
Dimensionsꢀ(Wꢀ×ꢀHꢀ×ꢀD) 113.9ꢀmmꢀ×ꢀ70.2ꢀmmꢀ×ꢀ28.9ꢀmmꢀ(excludingꢀprojections)
•ꢀ Cameraꢀbodyꢀ(excludingꢀbattery,ꢀmemoryꢀcard,ꢀneckꢀstrap,ꢀandꢀ
Weightꢀ(approx.)
connectorꢀcap):ꢀ160ꢀg
•ꢀ Battery,ꢀneckꢀstrap,ꢀandꢀconnectorꢀcap:ꢀ66ꢀg
1/4-20UNC
Tripodꢀscrewꢀhole
Dateꢀstorageꢀtime
Approx.ꢀ1ꢀweek
Operatingꢀtemperature 0ꢀ°Cꢀtoꢀ40ꢀ°C
Operatingꢀhumidity
Storageꢀtemperature
85%ꢀorꢀless
–20ꢀ°Cꢀtoꢀ60ꢀ°C
*1A JPEG file is also recorded (the JPEG file may be a fine- or normal-
quality file with the dimensions as the RAW file or a VGA file). RAW files
use the standard DNG format promoted by Adobe Systems, Inc.
*2For details on RAW, L, M sizes, see the documentation provided with the
camera unit.
*3Compatible with the Design rule for Camera File system (DCF, a
JEITA standard) and DPOF. Full compatibility with other devices is not
guaranteed.
*4Audio: PCM 32 kHz, 16 bit monaural
*5Flash off.
*6Mass Storage is supported under Windows 2000, Windows XP, Windows
Vista, and Mac OS X 10.4–10.5.7.
*7Measured according to CIPA standard. For reference only; actual
number of shots varies greatly according to how camera is used.
ꢀꢅꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal Memory/Memory Card Capacity
The approximate number of frames or length of movies
that can be stored in internal memory or on a memory
card at different settings varies depending on the type
of camera unit. See the documentation provided with
the camera unit.
Notes
• Each movie can be up to 90 minutes long (4GB in size).
• The maximum number of shots that can be taken in a single
burst is 999. If memory remains for more than 999 exposures,
“999”is shown in the display.
• Depending on the subject, the number of pictures that can be
taken may differ from the number of exposures remaining.
• Capacity varies with shooting conditions and the make of
memory card.
• Use a high-speed memory card when shooting for extended
periods.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢅꢅ
Optional Accessories
The GXR camera body can be used with the following
optional accessories:
Camera unit
DB-90 rechargeable
battery
BJ-9 battery charger
CA-ꢀ cable switch
VF-2 LCD viewfinder
A wired remote shutter release that An electrical viewfinder that
attaches to the USB connector of
the camera body.
attaches to the hot shoe of the
camera body. This offers viewfinder
coverage of 100% and can be
adjusted up to 90° without any
parallax, and enables easy low-
angle shooting.
GF-ꢀ external flash
An external flash that is developed
for digital camera with TTL auto-
flash system.
ST-ꢁ neck strap
ꢀꢅꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
SC-ꢃꢃS soft case
SC-ꢃꢃL soft case
Notes
• Before using optional accessories, read the manual provided
with the product.
• For the latest information on optional accessories, visit the Ricoh
website (http://www.ricohpmmc.com/).
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢅ9
Camera System and Accessories
GF-1 flash unit
SC-55S/SC-55L soft
case
VF-2 LCD
viewfinder
ST-3 neck strap
Attach to hot shoe
Attach camera unit
Attach to USB
connector
CA-1 cable switch
DB-90 rechargeable
battery (supplied)
Camera unit
BJ-9 battery
charger (supplied)
ꢀꢆ0
Download from Www.Somanuals.com. All Manuals Search And Download.
The GF-1 Flash Unit (Optional)
An optional GF-1 flash unit can be connected to the hot
shoe.
1 Close the flash cover (page 2).
Attach the flash.
2
Hot shoe
Turn the camera and the
GF-1 off and attach the
GF-1 to the hot shoe.
3 Turn the flash and camera on.
4 Press the DIRECT button.
Select the optional flash mode item.
Move the cursor using
+, –, Fnꢀ, Fn2 or the ADJ.
lever (left and right) to
highlight the item.
5
Select a flash mode.
Rotate the up-down dial to select a flash mode.
6
Note
• The optional flash mode item is not displayed when the GF-1 is
turned off.
• Turn the GF-1 off to shoot without the flash.
• If the optional flash mode item is not displayed, turn the GF-1
and camera off and then remove and reattach flash.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢆꢀ
OtherFlashUnits
Use only flash units with one signal terminal, which must
be an X-contact with a positive voltage of no more than
20V. Use a flash that covers the angle of view of the lens.
1 Close the flash cover (page 2).
Attach the flash.
Turn the camera and the optional flash unit off and
attach the flash to the hot shoe.
2
Set aperture manually.
Turn the camera on, select mode A or M, and choose
an aperture (pages 18, 48, 50).
3
Choose a manual ISO sensitivity setting.
Select an option other than Auto for ISO sensitivity
(page 90).
4
Turn the flash on.
Turn the flash on and set it to auto mode. Set
aperture and ISO sensitivity to the values selected
with the camera. Take a test shot and adjust flash
aperture and ISO settings as necessary.
5
Turn the optional flash unit off before removing it from
the camera.
Cautions
• If the external flash is on, it will fire with every shot regardless to
the flash mode selected with the camera. Turn the flash unit off
to shoot without the flash.
• Optional flash units are in principle for use at ranges that exceed
the range of the built-in flash. Using an optional flash unit at
shorter ranges may result in overexposure.
ꢀꢆ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Product Abroad
UsingBJ-9BatteryCharger
This product is for use with currents of 100–240V and
50 or 60Hz. Before travelling, purchase a travel adapter
for connection to the type of outlets used at your
destination. Do not use these products with electrical
transformers, as this could damage the product.
Warranty
This product was manufactured for use in the country
of purchase, and the warranty is not valid in other
countries. Should the product fail or malfunction while
out of the country, the manufacturer assumes no
responsibility for servicing the product locally or bearing
any expenditure incurred thereby.
TelevisionPlayback
The supplied A/V cable can be used to connect this
product to televisions and monitors equipped with a
video input terminal. This product supports the NTSC
and PAL video formats; before connecting the product
to a video device, select the appropriate video output
mode.
Precautions for Use
• The warranty is not valid in other countries. Should the product
fail or malfunction while out of the country, the manufacturer
assumes no responsibility for servicing the product locally or
bearing any expenditure incurred thereby.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢆꢁ
•
Do not drop this product or subject it to physical shocks. When
carrying the product, be careful that it does not strike other
objects. Particular care is required to protect the picture display.
• The flash may overheat if fired many times in succession. Do not
use the flash more than necessary. Do not use the flash in close
contact with your body or other objects. Failure to observe
these precautions could result in burns or fire.
• Using the flash unit in close proximity to your subject’s eyes
could cause temporary visual impairment. Particular care should
be observed when photographing infants. Do not direct the
flash at the operator of a motor vehicle.
• Battery may become hot with extended use. Wait for the battery
to cool before removing it from this product.
• The picture display may be difficult to read in direct sunlight.
•
You may notice that picture display varies in brightness or
contains pixels that do not light or that are always lit. This is
common to all LCD monitors and does not indicate a malfunction.
• Do not apply force to the picture display.
• Abrupt changes in temperature may cause condensation,
resulting in visible condensation inside this product, or
malfunction. This can be avoided by placing this product in a
plastic bag to slow the temperature change, and removing it
only after the air in the bag has reached the same temperature
as its surroundings.
• To prevent damage to the product, do not insert objects into
the holes in the microphone and speaker coverings.
• Keep the terminals of the connector free of dust.
• Keep this product dry and avoid handling it with wet hands.
Failure to observe these precautions could result in product
malfunction or electric shock.
• Take a test shot to ensure that this product is functioning
properly before using it on important occasions such as travel
or weddings. We recommend that you keep this manual and
spare batteries at hand.
ꢀꢆꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip:AvoidingCondensation
Condensation is particularly likely to occur if you move to an
area with a sharply different temperature, if humidity is high, in a
cold room after the heater has come on, or where this product is
exposed to cold air from an air conditioner or other device.
Care and Storage
Caringforthisproduct
• Clean the picture display by wiping it with a soft cloth
dampened with a small amount of any monitor cleaner that
does not contain organic solvents.
• Clean this product thoroughly after using it at the beach or
handling cosmetics. Do not expose this product to volatile
substances such as thinner, benzene, or pesticides. Failure to
observe this precaution could result in damage to this product
or its finish.
• In the unlikely event of malfunction, visit a Ricoh Repair Center.
• This product contains high-voltage circuits. Do not disassemble.
• The picture display is easily scratched; avoid touching it with
hard objects.
Storage
• Do not store this product where it will be exposed to: extreme
heat or humidity; large changes in temperature or humidity;
dust, dirt, or sand; severe vibration; prolonged contact with
chemicals, including mothballs and other insect repellent,
or with vinyl or rubber products; strong magnetic fields (for
example, in the vicinity of a monitor, transformer, or magnet).
• Remove the battery if the product will be left unused for a long
period of time.
BeforeCleaning
Turn the power off and remove the battery.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢆꢃ
Warranty and Servicing
1.ꢀ Thisꢀproductꢀisꢀbackedꢀbyꢀaꢀlimitedꢀwarranty.ꢀDuringꢀtheꢀwarrantyꢀperiodꢀmentionedꢀinꢀtheꢀWarrantyꢀ
suppliedꢀwithꢀthisꢀproduct,ꢀanyꢀdefectiveꢀpartsꢀwillꢀbeꢀrepairedꢀfreeꢀofꢀcharge.ꢀInꢀtheꢀeventꢀofꢀaꢀmalfunction,ꢀ
contactꢀtheꢀdealerꢀfromꢀwhichꢀyouꢀpurchasedꢀthisꢀproductꢀorꢀyourꢀnearestꢀRicohꢀRepairꢀCenter.ꢀPleaseꢀnoteꢀ
thatꢀyouꢀwillꢀnotꢀbeꢀreimbursedꢀforꢀtheꢀcostꢀofꢀbringingꢀthisꢀproductꢀtoꢀtheꢀRicohꢀRepairꢀCenter.
2.ꢀ Thisꢀwarrantyꢀdoesꢀnotꢀcoverꢀanyꢀdamageꢀresultingꢀfrom:
1ꢀ failureꢀtoꢀfollowꢀtheꢀinstructionsꢀinꢀtheꢀinstructionꢀmanual;
2ꢀ repair,ꢀmodificationꢀorꢀoverhaulꢀnotꢀconductedꢀbyꢀanꢀauthorizedꢀserviceꢀcenterꢀlistedꢀinꢀtheꢀinstructionꢀ
manual;
3ꢀ fire,ꢀnaturalꢀdisaster,ꢀactꢀofꢀGod,ꢀlightning,ꢀabnormalꢀvoltage,ꢀetc.;
4ꢀ improperꢀstorageꢀ(notedꢀinꢀtheꢀ“CameraꢀBodyꢀUserꢀGuide”),ꢀleakingꢀofꢀbatteryꢀandꢀotherꢀfluids,ꢀmold,ꢀorꢀ
otherwiseꢀinsufficientꢀcareꢀofꢀthisꢀproduct.
5ꢀ submergenceꢀinꢀwaterꢀ(flooding),ꢀexposureꢀtoꢀalcoholꢀorꢀotherꢀbeverages,ꢀinfiltrationꢀofꢀsandꢀorꢀmud,ꢀ
physicalꢀshock,ꢀdroppingꢀofꢀthisꢀproduct,ꢀorꢀpressureꢀonꢀthisꢀproduct,ꢀandꢀotherꢀunnaturalꢀcauses.
3.ꢀ Afterꢀtheꢀwarrantyꢀperiodꢀhasꢀpassed,ꢀyouꢀwillꢀbeꢀliableꢀforꢀallꢀrepairꢀfees,ꢀincludingꢀthoseꢀincurredꢀatꢀanꢀ
authorizedꢀserviceꢀcenter.
4.ꢀꢀYouꢀwillꢀbeꢀliableꢀforꢀallꢀrepairꢀfees,ꢀevenꢀwithinꢀtheꢀwarrantyꢀperiod,ꢀifꢀtheꢀwarrantyꢀcardꢀisꢀnotꢀattachedꢀorꢀ
ifꢀtheꢀdistributor’sꢀnameꢀorꢀtheꢀpurchaseꢀdateꢀhaveꢀbeenꢀchangedꢀorꢀareꢀnotꢀindicatedꢀonꢀtheꢀcard.
5.ꢀꢀExpensesꢀforꢀoverhaulꢀandꢀthoroughꢀinspectionꢀbyꢀspecialꢀrequestꢀofꢀtheꢀcustomerꢀwillꢀbeꢀchargedꢀtoꢀtheꢀ
customer,ꢀwhetherꢀorꢀnotꢀtheyꢀareꢀincurredꢀduringꢀtheꢀwarrantyꢀperiod.
6.ꢀꢀThisꢀwarrantyꢀonlyꢀappliesꢀtoꢀthisꢀproductꢀandꢀnotꢀtoꢀtheꢀaccessories,ꢀsuchꢀasꢀtheꢀcaseꢀandꢀstrap,ꢀnorꢀdoesꢀitꢀ
applyꢀtoꢀtheꢀbatteryꢀandꢀotherꢀconsumablesꢀprovided.
7.ꢀꢀAnyꢀconsequentialꢀdamagesꢀarisingꢀfromꢀfailureꢀofꢀthisꢀproduct,ꢀsuchꢀasꢀexpensesꢀincurredꢀinꢀtakingꢀpicturesꢀ
orꢀlossꢀofꢀexpectedꢀprofit,ꢀwillꢀnotꢀbeꢀreimbursedꢀwhetherꢀtheyꢀoccurꢀduringꢀtheꢀwarrantyꢀperiodꢀorꢀnot.
8.ꢀꢀTheꢀwarrantyꢀisꢀonlyꢀvalidꢀinꢀtheꢀcountryꢀinꢀwhichꢀthisꢀproductꢀwasꢀpurchased.
*ꢀ Theꢀaboveꢀprovisionsꢀreferꢀtoꢀrepairsꢀofferedꢀfreeꢀofꢀcharge,ꢀandꢀdoꢀnotꢀlimitꢀyourꢀlegalꢀrights.
*ꢀ Theꢀintentionꢀofꢀtheꢀaboveꢀprovisionsꢀisꢀalsoꢀdescribedꢀinꢀtheꢀwarrantyꢀcardꢀprovidedꢀwithꢀthisꢀproduct.
9.ꢀ Partsꢀessentialꢀtoꢀtheꢀservicingꢀofꢀthisꢀproductꢀ(thatꢀis,ꢀcomponentsꢀrequiredꢀtoꢀmaintainꢀtheꢀfunctionsꢀandꢀ
qualityꢀofꢀtheꢀproduct)ꢀwillꢀbeꢀavailableꢀforꢀaꢀperiodꢀofꢀfiveꢀyearsꢀafterꢀthisꢀproductꢀisꢀdiscontinued.
10.ꢀPleaseꢀnoteꢀthatꢀifꢀthisꢀproductꢀisꢀseriouslyꢀdamagedꢀbyꢀflooding,ꢀsubmergence,ꢀinfiltrationꢀofꢀsandꢀorꢀ
mud,ꢀviolentꢀshocksꢀorꢀdropping,ꢀitꢀmayꢀnotꢀbeꢀrepairable,ꢀandꢀrestorationꢀtoꢀitsꢀoriginalꢀconditionꢀmayꢀbeꢀ
impossible.
Notes
• Before sending this product in for repair, check the battery and read the
instruction manual again to ensure proper operation.
• Some repairs require a significant amount of time to complete.
• When sending this product to a service center, please include a note which
describes the defective part and the problem as precisely as possible.
• Remove all accessories not related to the problem before sending this product
to the service center.
• This warranty does not apply to data stored on memory cards or in internal
memory.
ꢀꢆꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTICES
USAFCCPart15ClassB
The equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, then user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. (FCC 15.105B)
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. (FCC 15.21)
Properly shielded and grounded cables and connectors must be used for
connection to a host computer in order to comply with FCC emission limits. (FCC
15.27)
COMPLIANCEINFORMATIONSTATEMENT
Product Name: CAMERA BODY
Model Number: GXR
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
RICOH AMERICAS CORPORATION
5 Dedrick Place, West Caldwell NJ, 07006 Tel.: 1-800-225-1899
NotetoUsersinCanada
Note: This Class B digital apparatus complies with Canadian ICES-003
RemarqueConcernantlesUtilisateursauCanada
Avertissement: Cet appareil numérique de la classe B est conforme a la norme NMB-
003 du Canada.
IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE INSTRUCTIONS
DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
Download from Www.Somanuals.com. All Manuals Search And Downloadꢀ. ꢆꢅ
Index
Camera shake correction....................92
Caplio...................................................... 154
Card Sequence No. ............................ 148
CD..................................... ix, 153, 155, 157
CL-BKT Black & White (TE) ............... 146
Clock................................................. 20, 149
Close-up....................................................27
Color......................................71, 75, 86, 89
Color Space Setting ........................... 146
Computer.............................................. 151
Connector cover ...................................... 3
Connector for A/V cable........................ 3
Continuous Mode .................................73
Contrast........................................... 71, 106
Copy to Card from Internal Memory
................................................................ 115
Symbols
5 (auto) mode................................. 4, 21
d (delete) button............................. 3, 39
O (DISP.) button............................. 3, 42
N (macro) button ............................ 3, 27
OPEN/f(flash) button..................... 3, 29
6 (playback) button......3, 19, 94, 101
t (Self-Timer) .................................... 3, 31
8/z button........................ 3, 26, 36, 38
9/Z button....................... 3, 26, 36, 38
A
A (aperture priority) mode............ 4, 48
A/V cable ........................................... ii, 118
ADJ. lever...................................... 3, 5, 134
ADJ Shutter Confirmation............... 135
Adobe Reader...................................... 156
AF auxiliary light......................2, 31, 140
Alert......................................................... 173
Aperture......................................46, 48, 50
Aperture Shift .........................................92
Autofocus..........................................22, 64
Autofocus/flash lamp
D
Date Imprint............................................84
Defaults..................................59, 127, 128
Deleting Photographs .........................39
Depth of Field.........................................64
Digital zoom............................................26
Digital Zoom Image........................... 147
DIRECT button......................................3, 5
DL-10..............................................153, 159
DNG............................................................63
DPOF....................................................... 115
.......................................3, 18, 22, 29, 141
Auto Power Off.................................... 141
Auto Rotate........................................... 143
B
Backlighting ............................................85
Battery.......................................................12
Battery/card cover..................... 3, 14, 15
Battery charger............................. 12, 183
Battery level.............................................10
Black & White ...................................71, 75
Blur..............................................................24
Bracketing................................................75
Brightness .............................44, 106, 139
E
Edit My Settings.................................. 132
Error Messages .................................... 167
Exposure............................................50, 85
Exposure Metering................................70
F
Flash, optional ..................................... 181
Flash amount ..........................................79
Flash compensation .......................... 136
Flash cover................................................. 2
C
ꢀꢆꢆ Cable switch......................................... 178
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Exposure Compensation.........78
Flash mode ..............................................28
Flash Synchro Settings ........................79
Fn1, Fn2 button...............................3, 136
Fn Button Display............................... 145
Focus..........................................................64
Focus Lock................................................25
Focus target.............................................66
Format [Card]....................................... 139
Format [Internal Memory]............... 139
Full Press Snap........................................69
Macintosh.............................................. 162
Macro Mode ............................................27
Manual Focus..........................................65
Memory, internal ......................... 15, 139
Memory card................................. 15, 139
C/D button........3, 58, 101, 126
Metering...................................................66
Microphone............................................... 2
M Mode Dial Options........................ 138
Mode dial................................................2, 4
Monochrome ...................................71, 75
Movie mode ............................................54
Movie size.................................................63
Multi-frame playback...........................36
MY modes ........................................... 4, 57
My Settings for Fn Settings............. 133
My Settings WB Comp. ..................... 133
G
Grid................................................... 42, 144
H
HDMI..............................................119, 149
Highlights.................................................43
Histogram....................................... 44, 108
Hot shoe .................................. 2, 181, 182
N
Neck strap ......................................... ii, 179
Noise Reduction.....................................80
Noise Reduction ISO.............................80
NTSC...............................................149, 183
I
Image Settings .......................................71
Interval Shooting...................................83
Irodio Photo & Video Studio........... 153
ISO Auto-High Settings.................... 140
ISO Setting...............................................90
O
One Press M Mode ............................. 138
One Press Zoom Ratio ...................... 143
Operation Sounds.............................. 142
Optional accessories ......................... 178
J
JPEG............................................................63
P
K
P(program shift) mode................... 4, 46
PAL..................................................149, 183
PictBridge.............................................. 120
Picture display ...............................3, 8, 42
Picture Quality/Size ..............................61
Playback, movies ...................................94
Playback, photographs........................34
Playback, TV.......................................... 118
Playback Menu.................................... 101
Playback Mode Dial Options.......... 138
Playback Zoom.......................................38
Power switch...................................... 2, 18
Key custom options........................... 127
L
Language/L................................... 149
LCD Brightness .................................... 139
LCD Confirmation Time.................... 142
Level Compensation.......................... 106
Level Setting......................................... 144
M
M (manual exposure) mode ......... 4, 50
ꢀꢆ9
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre-AF ........................................................70
Printing................................................... 122
Protect.................................................... 112
VM-1...............................................165, 166
Volume............................................ 94, 142
W
R
White Balance.........................................86
RAW............................................................62
Recall My Settings.............................. 131
Reg. My Settings ................................. 129
Restore Defaults.....................................91
RICOH Gate La...................................... 154
White Balance Compensation ..........89
Z
Zoom..........................................................26
S
S(shutter priority) mode ................ 4, 49
4 mode...................................... 4, 52
SD, SDHC...................................................15
Setup....................................................... 128
Sharpness.................................................71
Shooting Info. Display Frame......... 145
Shooting Menu ......................................58
Show My Setting Name.................... 145
Shutter-release button................... 2, 23
Shutter speed ..................................46, 49
Skew correction ........................... 56, 110
Slide Show............................................. 111
Snap Focus Distance ............................68
Software................................................. 154
Speaker ....................................................... 3
Start Settings Readout ..................... 150
Store Menu Cursor Position............ 147
Switch Shooting Mode........................92
T
Tilt Indicator ............................................32
Tripod screw hole.................................... 3
TV ............................................................. 118
U
Up-down dial........................................2, 5
USB cable...................120, 159, 160, 162
V
Video Out Mode.................................. 149
ꢀ90 Viewing Photographs ..........................34
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Support Numbers in Europe
UK
(fromꢀwithinꢀtheꢀUK)
(fromꢀoutsideꢀofꢀtheꢀUK)
(innerhalbꢀDeutschlands)
(außerhalbꢀDeutschlands)
(àꢀpartirꢀdeꢀlaꢀFrance)
(enꢀdehorsꢀdeꢀlaꢀFrance)
(dall’Italia)
02073 656 580
+44 2073 656 580
06331 268 438
+49 6331 268 438
0800 88 18 70
Deutschland
France
Italia
+33 1 60 60 19 94
02 696 33 451
(dall’estero)
(desdeꢀEspaña)
+39 02 696 33 451
91 406 9148
España
(desdeꢀfueraꢀdeꢀEspaña)
+34 91 406 9148
http://www.service.ricohpmmc.com/
Download from Www.Somanuals.com. All Manuals Search And Download.
Fromenvironmentalfriendlinesstoenvironmentalconservationand
toenvironmentalmanagement
Ricoh is aggressively promoting environment-friendly
activities and also environment conservation activities
to solve the great subject of management as one of the
citizens on our precious earth.
To reduce the environmental loads of digital cameras,
Ricoh is also trying to solve the great subjects of "Saving energy by reducing power consumption" and "Reducing
environment-affecting chemical substances contained in products".
IfYouEncounteraProblemwithThisProduct
See“Troubleshooting”(page 167) in this manual. If the problem persists, contact a Ricoh office.
Ricoh offices
3-2-3,ꢀShin-YokohamaꢀKouhoku-ku,ꢀYokohamaꢀCity,ꢀKanagawaꢀ222-8530,ꢀJapan
http://www.ricoh.com/r_dc
RICOHꢀCOMPANY,ꢀLTD.
5ꢀDedrickꢀPlace,ꢀWestꢀCaldwell,ꢀNewꢀJerseyꢀ07006,ꢀU.S.A.
RICOHꢀAMERICASꢀCORPORATION 1–800–22RICOH
http://www.ricoh-usa.com/
OberratherꢀStr.ꢀ6,ꢀ40472ꢀDüsseldorf,ꢀGERMANY
RICOHꢀINTERNATIONALꢀB.V.ꢀ
(EPMMC)
(innerhalbꢀDeutschlands)ꢀ
06331ꢀ268ꢀ438
(außerhalbꢀDeutschlands)ꢀ +49ꢀ6331ꢀ268ꢀ438
http://www.ricohpmmc.com/
(fromꢀwithinꢀtheꢀUK)ꢀ
(fromꢀoutsideꢀofꢀtheꢀUK)ꢀ +44ꢀ2073ꢀ656ꢀ580
(àꢀpartirꢀdeꢀlaꢀFrance)ꢀ 0800ꢀ88ꢀ18ꢀ70
(enꢀdehorsꢀdeꢀlaꢀFrance)ꢀ +33ꢀ1ꢀ60ꢀ60ꢀ19ꢀ94
(desdeꢀEspaña)ꢀ 91ꢀ406ꢀ9148
(desdeꢀfueraꢀdeꢀEspaña)ꢀ +34ꢀ91ꢀ406ꢀ9148
02073ꢀ656ꢀ580
RICOHꢀUKꢀLTD.ꢀ(PMMCꢀUK)
RICOHꢀFRANCEꢀS.A.S.ꢀ(PMMCꢀ
FRANCE)
RICOHꢀESPANA,ꢀS.A.ꢀ(PMMCꢀSPAIN)
RICOHꢀITALIAꢀS.p.A.ꢀ(PMMCꢀITALY)
(dall’Italia)ꢀ
(dall’estero)ꢀ
02ꢀ696ꢀ33ꢀ451
+39ꢀ02ꢀ696ꢀ33ꢀ451
RICOHꢀASIAꢀPACIFICꢀOPERATIONSꢀ
LIMITED
21/F,ꢀOneꢀKowloon,ꢀ1ꢀWangꢀYuenꢀStreet,ꢀKowloonꢀBay,ꢀHongꢀKong
Support for Irodio Photo & Video Studio
NorthꢀAmericaꢀ(U. S. A.)
+1–800–458–4029ꢀ(toll free)
UK,ꢀGermany,ꢀFranceꢀandꢀSpain:ꢀ+800–1532–4865ꢀ(toll free)
Otherꢀcountries:ꢀ+44–1489–564–764
+63–2–438–0090
Europe
Asia
China
+86–21–5385–3786
Businessꢀhours:ꢀ9:00ꢀAMꢀtoꢀ5:00ꢀPM
Ricoh Company, Ltd.
Ricoh Building, 8-13-1, Ginza, Chuo-ku, Tokyo
104-8222, Japan
2009 Decenber
*L754 2971A*
EN USA GB GB AE AE
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Radio Shack Cell Phone CT 354 User Guide
Radio Shack Cordless Telephone 43 683 User Guide
Radio Shack Cordless Telephone TAD 733 User Guide
Roland DVR MSQ 700 User Guide
Samsung Camcorder DCR HC52 User Guide
Samsung Cell Phone SPH M570 User Guide
Samsung CRT Television TXP1430F, TXP1634F, TXP2022 User Guide
Samsung Digital Camera WB650 User Guide
Saturn Automobile 2006 Ion User Guide
Seagate Computer Drive ST980815A User Guide