SyncMaster 1100MB
Install drivers
Install programs
Download from Www.Somanuals.com. All Manuals Search And Download.
occured, or the screen may be blurred.
Do not use a damaged or loose plug.
z
This may cause an electric shock or fire.
Do not pull the plug out by the wire nor touch the plug with wet hands.
z
This may cause an electric shock or fire.
Use only a properly grounded plug and receptacle.
z
An improper ground may cause electric shock or equipment damage.
Insert the power plug firmly so that it does not come loose.
z
A bad connection may cause fire.
Do not excessively bend the plug and wire nor place heavy objects upon
them, which could cause damage.
z
This may cause an electric shock or fire.
Do not connect too many extension cords or plugs to an outlet.
z
This may cause fire.
Installation
Be sure to contact an authorized Service Center when installing your set in a
location with heavy dust, high or low temperatures, high humidity, and chemical
substances, or where it will be operated for 24 hours continuously such as an
airport, train station or etc.
Failure to do so may cause serious damage to your set.
Put your monitor in a location with low humidity and a minimum of dust.
z
Failure to do so may cause an electric shock or fire inside the monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not drop the monitor when moving it.
z
This may cause damage to the product or human body.
Install the monitor base in a showcase or shelf so that the end of the
base does not protrude from the showcase or shelf.
z
Dropping the product may cause damage to the product or personal
injury.
Do not place the product on an unstable or small surface area.
z
Place the product on an even, stable surface, as the product may fall
and cause harm to someone walking by, specifically children.
Do not place the product on the floor.
z
Someone, specifically children could trip over it.
Keep any flammable objects such as candles, insecticides or cigarettes
away from the product.
z
Otherwise, this may cause a fire.
Keep any heating devices away from the power cable.
z
A melted coating may lead to electric shock or fire.
Do not install the product in places with poor ventilation, for instance, a
bookshelf, closet, etc.
z
Any increase in internal temperature may cause fire.
Set down the monitor carefully.
z
The monitor could be damaged or broken.
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not place the monitor face down.
The CDT surface may be damaged.
z
Do not use the monitor without the monitor stand.
z
It could break down or cause fire due to bad ventilation.
z
If the monitor must be used without the supplied stand, take steps to
insure proper ventilation.
When installing the product, make sure to keep it away from the wall
(more than 10cm/4inch) for ventilation purposes.
z
Poor ventilation may cause an increase in the internal temperature of
the product, resulting in a shortened component life and degraded
performance.
Clean
When cleaning the monitor case or the surface of the CDT, wipe with a slightly
moistened, soft fabric.
Do not clean Flat monitor with water. Use a water-diluted mild detergent.
(Some detergents contain significant amounts of alcohol-based solvents, which
can damage (color change) or crack the monitor case. The antiglare/anti-static
surface coating on the CDT may also be affected.)
Dilute the detergent (1:10 ratio) with water before using.
Do not spray water or detergent directly on the monitor.
Use the recommended detergent with a smooth cloth.
z
You may prevent the coated CDT from being damaged or the monitor
cabinet from being dissolved, cracked or discolored.
You may buy a recommended detergent at any Service Center.
z
If the connector between the plug and the pin is dusty or dirty, clean it
properly with a dry cloth.
z
A dirty connector may cause an electric shock or fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Make sure to unplug the power cord before cleaning the product.
z
Otherwise, this may cause electric shock or fire.
Unplug the power cord from the power outlet and wipe the product using
a soft, dry cloth.
z
Do not use any chemicals such as wax, benzene, alcohol, thinners,
insecticide, air freshener, lubricant or detergent.
Contact the Service Center or Customer Center for interior cleaning once
a year.
z
Keep the product's interior clean. Dust which has accumulated in the
interior over an extended period of time may cause malfunction or fire.
Others
Do not remove cover(or back).
z
This may cause an electric shock or fire.
z
Refer servicing to qualified service personnel.
If your monitor does not operate normally - in particular, if there are any
unusual sounds or smells coming from it - unplug it immediately and
.
contact an authorized dealer or service
z
This may cause an electric shock or fire.
Keep the product away from places exposed to oil, smoke or moisture;
do not install inside a vehicle.
z
This may cause malfunction, an electric shock or fire.
z
Especially avoid operating the monitor near water or outdoors where the
monitor could be exposed to snow or rain.
If the monitor is dropped or the casing is damaged, turn the monitor off
and unplug the power cord. Then contact the Service Center.
z
The monitor may malfunction, causing an electric shock or fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect the plug from the outlet during storms or lightening or if it is
not used for a long period of time.
z
Failure to do so may cause an electric shock or fire.
Do not try to move the monitor by pulling only the wire or the signal
cable.
z
This may cause a breakdown, electric shock or fire due to damage to the
cable.
Do not move the monitor right or left by pulling only the wire or the
signal cable.
z
This may cause a breakdown, electric shock or fire due to damage to the
cable.
Do not cover the vents on the monitor cabinet.
z
Bad ventilation may cause a breakdown or fire.
Do not place water containers, chemical products or small metal objects
on the monitor.
z
This may cause malfunction, an electric shock or fire.
z
If a foreign substance enters the monitor, unplug the power cord and
contact the Service Center .
Do not place any heavy objects on the monitor.
z
This may cause an electric shock or fire.
Keep the product away from combustible chemical sprays or
inflammable substances.
z
This may cause an explosion or fire.
Never insert anything metallic into the monitor openings.
z
This may cause an electric shock, fire or injury.
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep the monitor away from any magnetic substances.
This may cause discoloring or distortion of the image.
z
Watching the monitor continuously at a too close angle may result in
eyesight damage.
To ease eye strain, take at least a five-minute break after every hour of
using the monitor.
Do not install the product on an unstable, uneven surface or a location
prone to vibrations.
z
Dropping the product may cause damage to the product or personal
injury. Using the product in a location prone to vibrations may shorten
the lifetime of the product or may catch fire.
When moving the monitor, turn off and unplug the power cord.
Make sure that all cables, including the antenna cable and cables
connected to other devices, are disconnected before moving the
monitor.
z
Failure to disconnect a cable may damage it and lead to fire or an
electric shock.
Place the product out of children's reach, as they could damage it by
hanging onto it.
z
A falling product could cause physical damage even death.
When not using the product for an extended time period, keep the
product unplugged
z
Otherwise, this may cause heat emission from the accumulated dirt or
degraded insulation, leading to electric shock or fire.
Do not place children's favorite objects (or anything else that may be
tempting) on the product.
z
Children may try to climb on the product to retrieve an object. The
product could fall, causing physical damage or even death.
Download from Www.Somanuals.com. All Manuals Search And Download.
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Unpacking
Monitor and Stand
(Some models include a stand attached.)
Manual
Warranty Card
User's Guide,
Download from Www.Somanuals.com. All Manuals Search And Download.
(Not available in all
locations)
Monitor Driver,
Natural Color software,
MagicTune™ software
Quick Setup Guide
Cable
BNC Cable
(Sold separately)
Power Cord
D-sub Cable
Stand
Stand
Front
MagicBright™ is a new feature providing optimum viewing
environment depending on the contents of the image you are
watching.
1.
MagicBright™ button
[
]
Download from Www.Somanuals.com. All Manuals Search And Download.
Use this button for Exit the active menu or the OSD.
2.
3.
Exit button [
]
These buttons allow you to highlight and adjust items in the
Adjust buttons
menu.
[
] / [ ] / [ ]
Adjust Brightness and Contrast.
Use this button for open the OSD and activate a highlighted
menu item.
4.
5.
6.
Menu button [
]
This light glows green during normal operation, and blinks green
once as the monitor saves your adjustments.
Power indicator
Use this button for turn the monitor on and off.
Power button [ ]
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
Connect the power cord for your monitor to the power port on
the back of the monitor.
1.
2.
3.
Power port
Connect the signal cable to the 15-pin, D-sub connector on the
back of your computer.
Signal port
Connect the signal cable to the BNC signal port on the back of
your monitor.
BNC Connectors
See Connecting the Monitor for further information regarding cable connections.
Download from Www.Somanuals.com. All Manuals Search And Download.
Bottom
You can separate the base from the monitor.
1.
Tilt/Swivel Base
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Monitor
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
1.
Connecting to a computer
2-1.
Connect the signal cable to the 15-pin, D-sub connector on the back of your computer.
Connecting to a new Macintosh
Connect the monitor to the Macintosh computer using the D-SUB connection cable.
2-2.
2-3.
3.
Connecting to an old Macintosh
Connect your monitor to the Macintosh using the adapter for Macintosh (sold separately).
When you use a BNC connector.
Connect the BNC cable(sold separately) to the BNC signal port on the back of your
monitor/computer.
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
4.
Download from Www.Somanuals.com. All Manuals Search And Download.
Base Installation
Tilt/Swivel Base | Attaching and Removing the Base
Tilt/Swivel Base
With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable
viewing angle.
Attaching and Removing the Base
Attaching the Base
1. Place the monitor upside-down on a flat work surface.
2. Align the tabs on the base with the corresponding slots on the bottom of the monitor.
3. Press the base onto the monitor until the tabs are fully engaged in the slots.
4. Push the base toward the front of the monitor until the release latch clicks into the locked
position.
* Do not bend the snap.
Removing the Base
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Squeeze and pull up on the release latch on the base.
6. Push the base toward the back of the monitor and lift up to remove the base.
The base will align with the monitor slots in only one position.
Installing the Monitor Driver (Automatic)
When prompted by the operating system for the monitor driver, insert the CD-ROM
included with this monitor. Driver installation is slightly different from one operating
system to another. Follow the directions appropriate for the operating system you
have.
Prepare a blank disk and download the driver program file at the Internet web site shown
here.
z
Internet web site :
http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor (Korea)
Windows ME
1. Insert CD into the CD-ROM drive.
2. Click
.
"Windows ME Driver"
3. Choose your monitor model in the model list, then click the
button.
"OK"
4. Click the
button in the
window.
"Warning"
"Install"
5. Monitor driver installation is completed.
Windows XP/2000
1. Insert CD into the CD-ROM drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Click
"Windows XP/2000 Driver"
3. Choose your monitor model in the model list, then click the
button.
"OK"
4. If you can see following message window, then click the
button.
"Continue Anyway"
Then click
button.
"OK"
This monitor driver is under certified MS logo and this installation doesn't
damage your system. The certified driver will be posted on Samsung
Monitor homepage.
5. Monitor driver installation is completed.
Installing the Monitor Driver (Manual)
Windows XP | Windows 2000 | Windows Me | Windows NT | Linux
When prompted by the operating system for the monitor driver, insert the CD-ROM
included with this monitor. Driver installation is slightly different from one operating
system to another. Follow the directions appropriate for the operating system you
have.
Prepare a blank disk and download the driver program file at the Internet web site shown
here.
z
Internet web site :
http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor (Korea)
®
®
Microsoft Windows XP Operating System
1. Insert CD into the CD-ROM driver.
2. Click " " —> " " then click the "
" icon.
Start
Control Panel Appearance and Themes
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click "
" icon and choose the "
" tab then click "
".
Advanced..
Display
Settings
4. Click the "
" button on the "
" tab and select "
" tab.
Driver
Properties
Monitor
5. Click "
" and select "
" then click "
" button.
Next
Update Driver..
Install from a list or..
6. Select "
" then click "
Don't search ,I will..
" and then click " ".
Have disk
Next
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click the "
" button then choose A:(D:\Driver) and choose your monitor model in the
model list and click the " " button.
Browse
Next
8. If you can see following message window, then click the "
Continue Anyway
" button. Then
click "
" button.
OK
This monitor driver is under certified MS logo and this installation doesn't
damage your system. The certified driver will be posted on Samsung
Monitor homepage.
9. Click the "
Close
" button, then click "
" button continually.
OK
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Monitor driver installation is completed.
®
®
Microsoft Windows 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "
" button on the "
Browse
" window.
OK
2. Click the "
Insert disk
" button on the "
" window.
File Needed
3. Choose A:(D:\Driver) then click the "Open" button and then click "
" button.
OK
How to install
1. Click "
2. Double click the "
3. Choose the "
Settings
" , "
" , "
".
Start
Setting
Control Panel
" Icon.
Display
" tab and then click "
".
Advanced..
4. Choose "
".
Monitor
Case1:If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2:If the "Properties" button is active, click the "Properties" button then follow next steps
continually.
5. Click "
6. Choose "
" and then click on "
" then click on the "Next" button.
Driver
Update Driver..
Display a list of the known drivers for this device so that I can choose a
" then click "
" and then click "
".
specific driver
7. Click the "
8. Click the "
Next
" button then choose A:(D:\Driver).
Have disk
Browse
" button, then click "
" button.
Open
OK
9. Choose your monitor model and click the "
" button then click "
" button.
Next
Next
10. Click the "
Finish
" button then the "
" button.
Close
If you can see the "
" window then click the " "button.
Yes
Digital Signature Not Found
" button then the " " button.
And click the "
Finish
Close
®
®
Microsoft Windows Millennium Operating System
1. Click "
" , "
" , "
Control Panel
".
Start
2. Double click "
Setting
" icon.
Display
" tab and click "
3. Select the "
4. Select the "
5. Click the "
Change
6. Choose "
7. Choose "
8. Click the "
" button.
Settings
Advanced Properties
" tab.
Monitor
" button in the "
" area.
Monitor Type
".
Specify the location of the driver
Display a list of all the driver in a specific location..
" button
" then click "
Next
" button.
Have Disk
9. Specify A:\(D:\driver) then click "
" button.
" and choose the monitor that corresponds to the one you
OK
10. Select "
Show all devices
connected to your computer and click "
".
OK
" button and "
11. Continue choosing "
dialogue box.
" button until you close the Display Properties
OK
Close
®
®
Microsoft Windows NT Operating System
1. Click
,
,
, and then double-click
icon.
Start Settings Control Panel
Display
2. In Display Registration Information window, click Settings Tab and then click
All Display
.
Modes
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click
.
OK
button if you see the screen working normally after clicking
4. Click
. If the screen is
Test
Apply
not normal, change to a different mode (lower mode of resolution, colors or frequency).
If there is no Mode at
, select the level of resolution and vertical
All Display Modes
Download from Www.Somanuals.com. All Manuals Search And Download.
frequency by referring to the preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.
1. Press Enter at the first and the second screen after executing the X86Config file.
2. The third screen is for
setting your mouse
3. Set a mouse for your computer.
.
4. The next screen is for
.
selecting a keyboard
5. Set a Keyboard for your computer.
6. The next screen is for
.
setting your monitor
for your monitor. (You can enter the frequency
7. First of all, set a
directly.)
horizontal frequency
8. Set a
for your monitor. (You can enter the frequency directly.)
vertical frequency
9. Enter the
. This information will not affect the actual execution
model name of your monitor
of X-Window.
10. You have
setting up your monitor.
finished
X-Window after setting other requested hardware.
Execute
Natural Color
Natural Color Software Program
One of the recent problems in using a computer is that the color of the images printed out by a
printer or other images scanned by a scanner or a digital camera are not the same as those
shown on the monitor.
The Natural Color S/W is the very solution for this problem. It is a color administration system
developed by Samsung Electronics in association with Korea Electronics &
Telecommunications Research Institute (ETRI).
This system is available only for Samsung monitors and makes the color of the images on the
monitor the same as the printed or scanned images.
For more information, refer to Help (F1) in the software program.
How to install the Natural Color software
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial
screen of the program Natural Color will be executed. Click Natural Color on the initial screen
to install the Natural Color software.
To install the program manually, insert the CD included with the Samsung monitor into the CD-
ROM Drive, click the
button of Windows and then select
.
[Execute]
[Start]
Enter D:\color\eng\setup.exe and then press the
key.
<Enter>
(If the drive where the CD is inserted is not D:\, enter the applicable drive.)
How to delete the Natural Color software program
Download from Www.Somanuals.com. All Manuals Search And Download.
Select
/
on the
menu and then double-click
[Start] [Add/Delete a
[Setting] [Control Panel]
.
program]
Select Natural Color from the list and then click the
button.
[Add/Delete]
Download from Www.Somanuals.com. All Manuals Search And Download.
MagicBright™ is a new feature providing optimum viewing environment
1. [MagicBright
]
depending on the contents of the image you are watching.
Use this button to Exit the active menu or the OSD.
2. [Exit
3. [
]
These buttons allow you to highlight and adjust items in the menu. Adjust
/
/
]
Brightness and Contrast.
Use this button to open the OSD and activate a highlighted menu item.
4. [Menu
]
Download from Www.Somanuals.com. All Manuals Search And Download.
MagicBright™
Menu
Description
MagicBright™ is a new feature providing the optimum viewing environment
depending on the contents of the image you are watching. Currently four
different modes are available: Text, Internet, Entertain and Custom. Each
mode has its own pre-configured brightness value. You can easily select one
of four settings by simply pressing the MagicBright™ control button.
: Normal Brightness
For documentations or works involving heavy text.
MagicBright™
: Medium Brightness
For working with a mixture of images such as text and graphics.
: High Brightness
For watching motion pictures such as a DVD or VCD.
Brightness/Contrast
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Adjust Brightness and Contrast.
OSD Lock/Unlock
Menu
Description
After pushing the "MENU" button more than 10 seconds, OSD function is
locked (unlocked).
OSD Lock/Unlock
Download from Www.Somanuals.com. All Manuals Search And Download.
Select an icon that you want to know from the OSD menu to display a text or animation
explanation of that icon.
Menu
Position
Size
Description
Play/Stop
Follow these instructions to change the position of the
monitor's entire display.
Follow these instructions to change the size of the monitor's
entire display.
Follow these instructions to get a close-up or a longshot view
of the monitor's viewing area.
Zoom
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Play/Stop
Adjust the parallelogram setting when the display is leaning
left or right; adjust the rotation setting when the entire display
is tilted left or right.
Parallel/Rotation
Adjust the pincushion setting when the sides of the display
are bowed in or bowed out; adjust the trapezoid setting when
the top or bottom of the display is too large or small.
Pincushion/
Trapezoid
Adjust the pinbalance setting when the sides of the display
are bowed towards the left or right.
Pinbalance
Adjust the sidepin corner correction when the sides of the
display are bowed in or bowed out; adjust the side pin corner
correction when the top or bottom of the display is too large
or small.
Sidepin Corner
Adjust the Pinbalance Corner correction when the sides of
the display are bowed in or bowed out; adjust the side
pinbalance corner correction when the top or bottom of the
display is too large or small.
Pinbalance Corner
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Play/Stop
Select this mode when you want to adjust the image
according to your preferences.
The original setting for the color temperature is 9300K.
Follow these steps to change the color temperature and
adjust individual R,G,B color balance.
Select this mode when you want to adjust the image
according to your preferences.
The original setting for the color temperature is 5000K.
Follow these steps to change the color temperature and
adjust individual R,G,B color balance.
Standard Red Green Blue (sRGB) is a defined default color
space. If a monitor, printer and scanner are all calibrated to
the sRGB color characteristics, then you can find color
matching from each peripheral. When the monitor is in the
sRGB mode, Brightness / Contrast / MagicBright2™
adjustment is not available.
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Clear Moire
Linearity
Description
Play/Stop
A 'moiré' pattern can appear on your screen, looking like a
series of concentric circles or arcs.
To eliminate this pattern, use the clear moiré adjustments.
Adjust the linearity setting when the display image is
compressed at the top or bottom.
Use the focus control when the image displayed on the
screen is not sharp in all areas.
Focus
Convergence affects picture clarity. Adjust the horizontal or
vertical convergence to properly align the color dots that
make up the image.
Convergence
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Play/Stop
The Degauss feature will remove color impurities caused by
magnetic fields.
Do not use the Degauss feature more than once within a 30-
minute period.
Note: The monitor may buzz momentarily, the image colors
may change and the image will jiggle for a few seconds.
These effects are normal.
Degauss
Use the recall feature to reset these monitor settings to their
original levels: Position, Size, Parallelogram, Rotation,
Pincushion, Trapezoid, Pinbalance, Clear Moire.
Note: If you have selected "Yes", all settings listed
above will be reset. All other settings will remain the
same.
Recall
Some video cards use video signals higher than 1.0V which
causes the display to be very bright.
For those video cards, use this feature to select the 1.0 V
Level.
Video Input Level
Sync. Input Type
Use this menu to set your monitor to the correct type of
synchronization. Select 'Separate' if the computer is sending
a separate synchronization signal. Select 'Sync. on Green' if
the computer expects the monitor to synchronize with the
green signal it sends. Refer to your computer or video card
user's manual to determine the correct setting.
Use this menu to choose between the signal source
connected to the BNC connector input and the signal source
connected to the D-SUB connector input. Note: When you
are finished, wait for a few seconds and the screen will blank
then display the image from the new signal source(other
computer). A cable must be connected to both inputs to use
this function.
D-SUB/BNC
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Play/Stop
You can see the frequency (user control mode) used by the
user, the polarity of the operational signals, the default
frequency (default mode) set when you buy the monitor and
the resolution level.
Note: These screens do not allow any changes to the
settings, they are for information only.
Display timing
You can change the position where the OSD menu appears
on your monitor.
Menu Position
Menu Duration
The menu will automatically turn off if no adjustments are
made for a certain time period.
You can set the amount of time the menu will wait before it
turns off.
Follow these steps to change the language used in the
menu. You can choose one of ten language. English,
German,French, Italian, Portuguese, Spanish, Swedish,
Russian, Polish ,or Magyar.(Some OSD language may not
appear in some areas.)
Language
The language chosen affects only the language of the OSD.
It has no effect on any software running on the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
|
Installation
|
OSD Mode
|
Uninstall
|
Troubleshooting
Overview
What is MagicTune™?
Monitor performance can vary due to the graphics card, host computer lighting conditions and other
environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique
setting. Unfortunately, the manual controls available to tune the image often prove to be challenging. Proper
adjustment (tuning) requires an easy to use program that goes through a step-by-step process to obtain the
best overall picture quality.
In most cases even simple adjustments to Brightness, or Contrast require navigation of the multi-level, on-
screen display (OSD) menus that are not easy to understand. Furthermore, there is no feedback to assist in
correctly setting the controls of the monitor. MagicTune is a software utility that guides you through the tuning
process with easy to understand instructions and back ground patterns designed for each monitor control. The
display settings for each user can be saved, providing an easy way to select display characteristics in a multi-
user environme or having a single user have multiple defined presets based on content and ambient lighting.
Basic Functionality
MagicTune is a software utility that allows monitor adjustment and color tuning using the Display Data
Channel Command Interface (DDC/CI) protocol. All adjustments to the display are controlled via software
to eliminate the need to use the monitor on-screen display (OSD).
MagicTune supports Windows™ 98 SE, Me, 2000, XP Home, and XP Professional.
It is recommended using MagicTune in Windows™ 2000 or later.
MagicTune allows for quick accurate tuning of the display with the ability to easily save and use monitor
configurations that are best suited for you.
OSD Mode
The OSD mode allows easy adjustment of monitor settings without taking pre-defined steps. You can access the
desired menu item to set with ease.
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
|
Installation
|
OSD Mode
|
Uninstall
|
Troubleshooting
Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the MagicTune™ installation file.
3. Select installation Language, Click "Next".
4. When the InstallationShield Wizard window appears, click "Next."
5. Select "I agree to the terms of the license agreement" to accept the terms of use.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Choose a folder to install the MagicTune program.
7. Click "Install."
8. The "Installation Status" window appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Click "Finish."
10. When the installation is complete, the MagicTune executable icon appears on your desktop.
Double-click the icon to start the program.
Magictune execution icon may not appear depending on specification of computer
system or monitor. If that happens, press F5 Key.
Installation Problems
The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network
environment.
See "Troubleshooting" if you have trouble during installation.
System Requirements
Download from Www.Somanuals.com. All Manuals Search And Download.
OS
z
z
z
z
z
Windows™ 98 SE
Windows™ Me
Windows™ 2000
Windows™ XP Home Edition
Windows™ XP Professional
It is recommended using MagicTune in Windows™ 2000 or later.
Hardware
z
z
32MB Memory above
25MB Hard disk space above
* For more information, visit the MagicTune website.
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
|
Installation
|
OSD Mode
|
Uninstall
|
Troubleshooting
MagicTune allows for quick accurate tuning of the display with the ability to easily
save and use monitor configurations that are best suited for you.
z
OSD mode may appear inconsistent with the explanation in
guidance book depending on specification of each monitor.
z
MagicTune control mode will be different according to monitor models.
OSD Mode
The OSD mode makes the adjustment of settings on all monitors easy. When selected , each tab on top of the
control window displays the general descriptions of the sub-menu items for adjustment.
When selected, each tab displays a list of menus. For quick adjustment of the monitor settings, the OSD mode
allows easy and convenient access to all tabs and sub-menu items.
Button Tab Definition
OK
Applies any changes made and exits MagicTune.
Restores the display settings to the factory settings.
Reset
Exits MagicTune without applying the changes made. If you have not made any changes
in the control window, clicking "Cancel" does not cause any actions.
Cancel
Picture Tab Definition
Download from Www.Somanuals.com. All Manuals Search And Download.
Allows the user to adjust the screen settings to the desired values.
Brightness
Contrast
MagicBright
nmlkj
nmlkji
nmlkj
Makes the entire screen brighter or darker. The detailed data of the images in the dark
areas can be lost if the brightness is not adjusted to the proper level. Adjust the
brightness for best viewing conditions.
Brightness
Contrast
Adjusts the difference in brightness between the bright and dark areas on screen.
Determines the crispness of the images.
MagicBright™ is a new feature providing the optimum viewing environment depending on
the contents of the image you are watching. Currently four different modes are available:
Text, Internet,Game, Sport, Movie and Custom. Each mode has its own pre-configured
brightness value. You can easily select one of six settings by simply pressing MagicBright
control buttons.
z
19" or above
1. Text: For documentations or works involving heavy text.
2. Internet: For working with a mixture of images such as text and graphics.
3. Game: For watching motion pictures such as a Game.
MagicBright™
4. Entertain: For watching motion pictures such as a DVD or VCD.
z
Less than 19"
1. Text: For documentations or works involving heavy text.
2. Internet: For working with a mixture of images such as text and graphics.
3. Entertain: For watching motion pictures such as a DVD or VCD.
Color Tab Definition
Adjusts the "warmth" of the monitor background or image color.
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Tone
Color Control
nmlkj
nmlkji
The tone of the color can be changed.
z
z
5000K - 6500K - 9300K
Reset
Color Tone
Adjusts of the monitor image color.
You can change the monitor color to your desired color.
Color Control
z
z
R- G - B
sRGB
Image Tab Definition
Adjusts the Position, Size and Rotation values.
Download from Www.Somanuals.com. All Manuals Search And Download.
Geometry 1
Rotation
Size Position
nmlkj
nmlkji
nmlkj
Geometry 2
Pincushion
Pinbalance
Trapezoid
Parallelogram
nmlkj
nmlkj
nmlkj
nmlkj
Other
Moire
Degauss
Sidepin Corner Top
Sidepin Corner Bottom
nmlkj
nmlkj
nmlkj
nmlkj
nmlkj
Pinbalance Corner Top
Pinbalance Corner Bottom
nmlkj
Adjusts the Position, Size and Rotation values.
Geometry 1
Geometry 2
z
z
z
Position
Size
Rotation
Adjusts the Pincushion, Pinbalance, Trapezoid and Parallelogram values.
z
z
z
z
Pincushion
Pinbalance
Trapezoid
Parallelogram
Adjusts the Moire, Degauss, Sidepin Corner, and Pinbalance Corner values.
z
z
z
z
z
z
Moire
Degauss
Sidepin Corner Top
Sidepin Corner Bottom
Pinbalance Corner Top
Pinbalance Corner Bottom
Other
Option Tab Definition
You can configure MagicTune using the following options.
Download from Www.Somanuals.com. All Manuals Search And Download.
Loads the Preferences Dialog Box. Preferences in use will have an "V" in the check box. To
turn on or off any Preference, position the cursor over the box and click.
Preferences
z
Enable task tray menu .
- To access the MagicTune menus, click the icon on the [task tray menu].
The menus are not displayed if the [Enable System Tray] is deselected in
[Options] ' [Basic Settings].
z
Select Language - The language chosen affects only the language of the OSD.
Support Tab Definition
Shows the Asset ID and the version number of the program, and allows you to use the Help feature.
Visit the MagicTune website or click to open the Help files (User Manual) if you need any
Help
help installing or running MagicTune. The User Manual opens within a basic browser
window.
you can use the server to control the Client monitor.
(Server program should be installed to use this program as Client)
Asset ID
User Name
Shows the user name that is registered in PC.
Download from Www.Somanuals.com. All Manuals Search And Download.
User ID
Shows the user ID that is register in PC.
Write down the server IP .
Server IP
Department
Location
Write down the department.
Write down the location.
Version
Displays the version of MagicTune.
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
|
Installation
|
OSD Mode
|
Uninstall
|
Troubleshooting
Uninstall
The MagicTune program can be removed only by using the "Add or Remove Programs" option of the
Windows™ Control Panel.
Perform the following steps remove MagicTune.
1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on
Windows™ XP, go to [Control Panel] in the [Start] menu.
2. Click the "Add or Remove Programs" icon in Control Panel.
3. In the "Add or Remove Programs" screen, scroll down to find "MagicTune." Click on it to highlight it.
4. Click the "Change/Remove" button to remove the program.
5. Click "Yes" to begin the uninstall process.
6. Wait until the "Uninstall Complete" dialog box appears.
Visit the MagicTune website for technical support for MagicTune, FAQs (questions and answers) and
software upgrades.
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
|
Installation
|
OSD Mode
|
Uninstall
|
Troubleshooting
Troubleshooting
The current computing system is not compatible with MagicTune.
Please press OK and click on the "Shortcut to the MagicTune site" to view our home page
for further reference.
An error may occur when your video/graphic card is not in the 'Available' list.
(The latest or oldest video cards may not be compatible.)
Please visit our homepage to see the Troubleshooting section.
An error may occur if the card maker has modified the video card driver or the
graphics chip even when the video card is in the list.
Please visit our homepage to see the Troubleshooting section.
Check if your monitor is manufactured by Samsung.
Products from other manufacturers may cause errors.
Only Samsung products are able to support this feature.
An error may occur even when your monitor is manufactured by Samsung but is
out of date.
Check if your monitor is able to support MagicTune.
This feature is only supported by those monitors that are registered on our homepage.
Check for the monitor before purchasing it as out-of-date models are not supported.
An error occurs when no information on EDID (Extended Display Identification
Data) exists for the current monitor.
This happens when from your desktop, Start > Setup > Control Panel > System >
Hardware > Device Manager > Monitor is selected, the current "Plug-and-play
monitor" is removed and new hardware is searched for but the system couldn't find
any "Plug-and-play monitor".
Please visit our homepage to see the Troubleshooting section.
An error occurs when replacing the monitor with a new one when the system
power is off but the system has not been restarted.
Please restart the system each time the monitor is replaced before using MagicTune.
An error occurs when the video card driver is not installed properly.
This happens when the current video card list is not displayed normally. You can
check this via Start > Setup > System > Hardware > Device Manager > Display
Adapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Visit the video card maker's homepage and download and install the latest driver.
For more information about the video card, contact the card manufacturer.
To ensure normal operation, please restart your system.
An error occurs when the system is not restarted after installing MagicTune.
(This is for Win98SE and WinMe only.)
Restart the system before use.
For the best performance of MagicTune, adjust to the optimal resolution. Refer to the User
Guide for the optimal resolution.
If you do not adjust to the optimal resolution and perform Color Calibration, the
monitor cannot be adjusted to the optimal condition.
Refer to the manual for the optimal resolution.
This video card does not support MagicTune.
Please install a new video card driver.
An error occurs when the video card driver is not installed properly.
This happens when the current video card list is not displayed normally. You can
check this from Start > Setup > System > Hardware > Device Manager > Display
Adapter.
Visit the video card manufacturer's homepage and download and install the latest
driver.
For more information about the video card, contact the card manufacturer.
As the Highlight program uses the communication lines,
please exit the Highlight program before you can access MagicTune.
Some of Samsung CDT monitors support the Highlight feature.
When using both the Highlight feature and MagicTune simultaneously, conflicts
occur, which cause errors.
Make sure to turn OFF Highlight before using MagicTune.
Troubleshooting
z
MagicTune may not work in case monitor is replaced or driver of graphic card is updated while
MagicTune is operating. If so, please restart the system.
Symptom
Check when
MagicTune does not
function properly.
Check List
Solutions
MagicTune feature is found
only on PC (VGA) with
Window OS that supports
Plug and Play.
* To check whether your PC is available for
MagicTune feature, follow the
steps below (When Windows™ is XP);
Control Panel -> Performance and Maintenance
-> System -> Hardware -> Device Manager ->
Monitors -> After deleting Plug and Play
monitor, find 'Plug and Play monitor' by
searching new Hardware.
MagicTune is an additional software for the
monitor. Some graphic cards may not support
your monitor. When you have a problem with
Download from Www.Somanuals.com. All Manuals Search And Download.
the graphic card, visit our website to check the
compatible graphic card list provided.
MagicTune™ doesn't Have you changed your PC
work properly. or video graphic card?
Download the latest program. The program can
be downloaded
z
z
Visit the MagicTune website for technical support for MagicTune, FAQs (questions and answers) and
software upgrades.
Visit the MagicTune website and download the installation software for MagicTune MAC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Check List
Before calling for service, check the information in this section to see if you can remedy any
problems yourself. If you do need assistance, please call the phone number on the
Information section or contact your dealer.
Symptom
Check List
Solutions
No images on the
screen. I cannot turn
on the monitor.
Is the power cord
connected
properly?
Check the power cord connection and supply.
Can you see "
Connection,
Check Signal
Check the signal cable connection.
No
" on the
Cable
screen?
If the power is on,
If the initial screen (the login screen) appears, boot
reboot the computer the computer in the applicable mode (the safe
to see the initial
screen(the login
screen), which can
be seen.
mode for Windows ME/XP/2000) and then change
the frequency of the video card.
(Refer to the Preset Timing Modes)
Note: If the initial screen (the login screen) does
not appear, contact a service center or your dealer.
Can you see "
Sync.
You can see this message when the signal from
the video card exceeds the maximum resolution
and frequency that the monitor can properly
handle.
Out of Range,
"
68.7kHz 168Hz PP
on the screen?
Adjust the maximum resolution and frequency that
the monitor can handle properly.
There is no image
on the screen.
Is the power
The monitor is in PowerSaver mode.
Press any key on the keyboard to activate the
monitor and restore the image on the screen.
indicator on the
monitor blinking at 1
second intervals?
I cannot see the On
Screen Display.
Have you locked
Unlock the OSD by pressing the Menu button for at
least 10 seconds.
the
On Screen
Display (OSD)
Menu to prevent
Download from Www.Somanuals.com. All Manuals Search And Download.
changes?
The image on the
screen is shaking.
Check the monitor
configuration to see maximum resolution and frequency of the monitor.
The signal from the video card exceeds the
if it is in Interlace
Mode. (Interlace
Mode: Vertical
frequency 43Hz,
87Hz(i), etc)
Are there any
Move the monitor away from anything that can
create a strong magnetic field.
magnetic products
such as a power
adapter, speaker or
a high voltage wire
near by?
Is the voltage
stable?
The screen image can appear to shake or vibrate
at a particular time of day due to low supply
voltage.
The screen image can also appear to shake or vibrate if there is a problem
with the video card or the computer's main board.
The screen shows
strange colors or just
black and white.
Is the screen
displaying only one
color as if looking at Make sure the video card is fully inserted in it's
Check the signal cable connection.
the screen through
a cellophane
paper?
slot.
Have the screen
colors become
strange after
Reboot the computer.
running a program
or due to a crash
between
applications?
Has the video card
been set properly?
Set the video card by referring to the video card
manual.
The screen suddenly
has become
unbalanced.
Have you changed
the video card or
the driver?
Adjust screen image position and size using the
OSD.
Have you adjusted
the resolution or
frequency on the
monitor?
Adjust the resolution and frequency of the video
card.
(Refer to the Preset Timing Modes).
The screen can be unbalanced due to the cycle of the video card signals.
Readjust Position by referring to the OSD.
The screen is out of
focus or OSD cannot
be adjusted.
Have you adjusted
the resolution or
frequency on the
monitor?
Adjust the resolution and frequency of the video
card.
(Refer to the Preset Timing Modes).
The screen is partially
distorted.
Are there any
magnetic products
Enter the OSD and perform a "Degauss".
such as an adapter, Keep the monitor away from any magnetic
speaker or a high
voltage wire near
the monitor?
products.
LED is blinking but no
images on the screen.
Is the frequency
properly adjusted
when checking the
Display Timing on
the menu?
Adjust the frequency properly by referring to the
video card manual and the Preset Timing Modes.
(The maximum frequency per resolution may differ
from product to product.)
There are only 16
colors shown on the
screen.
Have the Windows
colors been set
properly?
Windows ME/2000/XP:
Set the colors properly at the
→
Control Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
The screen colors
have changed after
changing the video
card.
→
.
Settings
Display
Has the video card
been set properly?
Set the video card by referring to the video card
manual.
There is a message
that reads
Have you installed
the monitor driver?
Install the monitor driver according to the Driver
Installation Instructions.
"Unrecognized
monitor, Plug & Play
(VESA DDC) monitor
found".
See the video card
manual to see if the Installation Instructions.
Plug & Play (VESA
Install the monitor driver according to the Driver
DDC) function can
be supported.
Check when
MagicTune feature
* To check whether your PC is available for
MagicTune does not
function properly.
is found only on PC MagicTune feature, follow the
(VGA) with Window
OS that supports
Plug and Play.
steps below (When Windows is XP);
Control Panel -> Performance and Maintenance ->
System -> Hardware -> Device Manager ->
Monitors -> After deleting Plug and Play monitor,
find 'Plug and Play monitor' by searching new
Hardware.
MagicTune is an additional software for the
monitor. Some graphic cards may not support your
monitor. When you have a problem with the
graphic card, visit our website to check the
compatible graphic card list provided.
MagicTune™ doesn't
work properly.
Have you changed
your PC or video
graphic card?
Download the latest program. The program can be
downloaded
Visit the MagicTune™ website and download the installation software for MagicTune™
MAC.
Check the following items if there is trouble with the monitor.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request an after-service for the main board of the computer.)
3. If you installed a new video card or if you assembled the PC, check if the installed adapter (video)
driver and the monitor driver.
4. Check if the scanning ratio of the video screen is set at 50Hz or 160 Hz .
(Do not exceed 60Hz when using the maximum resolution.)
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,
remove the Display Adapter at the " " and then
→
→
Control Panel System Device Administrator
reboot the computer to reinstall the adapter (video) driver.
If problems repeatedly occur, contact an authorized service center.
Q & A
Question
Answer
How can I change the
frequency?
Frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version
of the driver used. (Refer to the computer or the video card
manual for details.)
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the
Control
→
→
.
Panel Display Settings
* Contact the video card manufacturer for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
How can I set the Power Saving Windows ME/XP/2000 : Set the function at BIOS-SETUP of the
function?
computer or the screen saver. (Refer to Windows/Computer
Manual).
The monitor makes a sound
when it is turned on.
This is normal as some sound may be generated when the metal
case and the electromagnet, which are installed to block any
electromagnetic waves, interact with each other.
How can I clean the outer
case/Picture tube?
Disconnect the power cord and then clean the monitor with a soft
cloth, using either a cleaning solution or plain water.
Do not leave any remains of the detergent nor scratch the case.
Do not allow any water to go inside the monitor.
Self-Test Feature Check
Self-Test Feature Check | Warning Messages | Environment | Useful Tips
Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly.
Self-Test Feature Check
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.
This box appears during normal operation if the video cable becomes disconnected or
damaged.
4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the
monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; your monitor is functioning properly.
Warning Messages
If there is something wrong with the input signal, the message below appears on the screen
or the screen goes blank although the power indicator LED is still on. The message may
indicate that the monitor is out of scan range or that you need to check the signal cable.
Environment
The location and the position of the monitor may influence the quality and other
features of the monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer
to another room.
2. Remove all electronic devices such as radios, fans, clocks and telephones that are
within 3 feet (one meter) of the monitor.
3. Degauss the monitor if any devices were removed from the area.
Useful Tips
z
A monitor recreates visual signals received from the computer. Therefore, if there is trouble with
the computer or the video card, this can cause the monitor to become blank, have poor coloring,
noise, Sync. Out of Range, 68.7kHz 168Hz PP, etc. In this case, first check the source of the
problem, and then contact a service center or your dealer.
z
Judging the monitor's working condition
If there is no image on the screen or a "Sync. Out of Range, 68.7kHz 168Hz PP" message
comes up, disconnect the cable from the computer while the monitor is still powered on.
{
If there is a message coming up on the screen or if the screen goes white, this means the
monitor is in working condition.
{
In this case, check the computer for trouble.
Download from Www.Somanuals.com. All Manuals Search And Download.
General
General
Model Name
Picture Tube
Type
SyncMaster 1100MB
21" DynaFlat (20" viewable)
90 °
Deflection angle
Dot Pitch
0.20 mm (Horizontal)
Screen type
Aluminized tri-color phosphor dot trio with black matrix.
Anti-doming invar shadow mask.
Multi-layer coated with anti-static.
Resolution
Optimum resolution
Maximum resolution
Active Display
Horizontal
1280 x 1024 @ 85 Hz
2048 x 1536 @ 80 Hz
393 ± 3 mm
295 ± 3 mm
Vertical
Synchronization
Horizontal
30 ~ 130 kHz
50 ~ 160 Hz
Vertical
Input Signal, Terminated
RGB Analog
0.7Vp-p ± 5%, Positive bright, 75 Ω ± 5%(terminated),
Separate H/V sync, Composite, SOG, TTL level, positive or negative.
Input Signal Definition
Signal connectors
Signal cable
15-pin 3-row mini D-sub connector, BNC
15pin-to-15pin D-sub cable
Display Color
Unlimited
Download from Www.Somanuals.com. All Manuals Search And Download.
Maximum Pixel Clock
360 MHz
Power Supply
90 ~ 264VAC rms, 60/50 Hz ± 3 Hz
Power Consumption
130 W (nominal)
Dimensions (WxDxH)
504 x 500 x 508 mm / 19.8 x 19.7 x 20 inch (After installation of Stand)
Weight
28.0 kg
Environmental considerations
Operating
Temperature 32°F ~ 104°F(0°C ~ 40°C)
Humidity 10% ~ 80%, non-condensing
Storage
Temperature -4°F ~ 113°F (-20°C ~ 45°C)
Humidity 5% ~ 95%, non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and
computer systems will provide the best operating conditions and monitor settings. In most cases,
monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Note : Design and specifications are subject to change without prior notice.
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy by
switching your monitor into a low-power mode when it has not been used for a certain amount of time.
The monitor automatically returns to normal operation when you press a key on the keyboard. For energy
conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer.
Use a software utility installed on your computer to set up this feature.
Power-off mode
State
Normal Operation
EPA/ENERGY 2000
Green, Blinking
Less than 2 W
Power Indicator
Green
Power Consumption
130 W (nominal)
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.
Download from Www.Somanuals.com. All Manuals Search And Download.
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
Display Mode
IBM, 720 x 400
VESA, 640 x 480
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1280 x 1024
VESA, 1600 x 1200
VESA, 1920 x 1440
31.469
43.269
53.674
68.677
91.146
106.250
112.500
70.087
85.008
85.061
84.997
85.024
85.000
75.000
28.322
36.000
56.250
94.500
157.50
229.50
297.00
-/+
-/-
+/+
+/+
+/+
+/+
-/+
VESA(CVT),
2048 x 1536
120.384
75.000
340.50
-/+
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of
the screen horizontally is called Horizontal Cycle and the inverse
number of the Horizontal Cycle is called Horizontal Frequency. Unit:
kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same image
many times per second to display an image to the user. The
frequency of this repetition is called Vertical Frequency or Refresh
Rate. Unit: Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
The address and phone number of the company can be changed without previous notice.
CANADA :
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
Tel. 1-800-SAMSUNG (7267864)
Fax. (905) 542-1199
MAXICO :
Tel. 01-800-SAMSUNG (7267864)
Fax. 01.800.849.1743
U.S.A :
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
Tel. 1-800-SAMSUNG (7267864)
ARGENTINE :
Tel. 0800-333-3733
BOLIVIA :
Fax. 56-2-485-8502
Download from Www.Somanuals.com. All Manuals Search And Download.
BRAZIL :
Samsung Electronica da Amazonia Ltda
Rua Prof. Manoelito de ornellas 303, Terreo B.
Chacara Sto. Antonio, 04719-040
Sao Paulo, SP, Brazil
Tel. 0800-124-421
CHILE :
Samsung Electronics Chile LTDA.
Avda. Americo Vespucio Sur 100, Oficina 102
Las Condes, Santiago, Chile
Tel. 800-726-7864(SAMSUNG)
Fax. 56-2-485-8502
COST RICA :
Tel. 0-800-507-7267
ECUADOR :
Tel. 1-800-10-7267
EL SALVADOR :
Tel. 800-6225
GUATEMALA :
Tel. 1-800-299-0013
JAMAICA :
Tel. 1-800-234-7267
PANAMA :
Tel. 800-7267
PUERTO RICO :
Tel. 1-800-682-3180
REP. DOMINICA :
Tel. 1-800-751-2676
TRINIDAD & TOBAGO :
Tel. 1-800-7267-864
VENEZUELA :
Tel. 1-800-100-5303
BELGIUM :
Samsung Electronics Benelux BV
Nijverheidsstraat?8?160?ommelgem,
Belgium
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel. 02 201 2418
CZECH REPUBLIC :
Tel. 844 000 844
DENMARK :
Tel. 38 322 887
FINLAND :
Tel. 09 693 79 554
FRANCE :
Samsung Service Consommateurs
66 rue des Vanesses
BP 50116 - Villepinte -95950 ROISSY cedex
France
Tel. 08 25 08 65 65 (0,15?min)
Fax. '01 48 63 06 38 (0,15?min)
GERMANY :
Samsung Electronics GmbH
Samsung House
Am Kronberger Hang 6
65824 Schwalbach/Ts.
Deutschland
Tel. 01805 - 121213 (?0,12/Min)
Fax. 01805 - 121214 (?0,12/Min)
HUNGARY :
Tel. 06 40 985 985
ITALIA :
Samsung Electronics Italia S.p.A
Via C. Donat Cattin, 5
20063, Cernusco Sul Naviglio (MI)
Tel. 199 153 153
Fax. 02 92141801
LUXEMBURG :
Samsung Electronics Benelux BV
Nijverheidsstraat?8?160?ommelgem,
Belgium
Tel. 02 261 03 710
Download from Www.Somanuals.com. All Manuals Search And Download.
NETHERLANDS :
Samsung Electronics Benelux BV
P.O. Box 681 2600 AR Delft, The Netherlands
Tel. 0900 20 200 88 (?0.10/Min)
NORWAY :
Tel. 231 627 22
POLAND :
Tel. 0 801 801 881
Fax. +48-22-607 4448
PORTUGAL :
SAMSUNG ELECTRONICA PORTUGUESA, S.A
Rua Cesario Verde, no 5-4, Piso
2795-753 Queijas-Portugal
Tel. 80 8 200 128
SLOVAKIA :
Tel. 0850 123 989
SPAIN :
Tel. 902 10 11 30
SWEDEN :
Tel. 08 585 367 87
U.K :
Samsung Electronics U.K. Ltd.
Unit C, Stafford Park 12
Telford, Shropshire
TF3 3BJ
The United Kingdom
Tel. 0870 242 0303
Fax. 01952 297617
RUSSIA :
Tel. 8-800-200-0400
Download from Www.Somanuals.com. All Manuals Search And Download.
UKRAINE :
30A, Spaska St, Floor 3, Kiev 04070, Ukraine
Tel. 8-800-502-0000
Fax. +380 (44) 537 59 48
AUSTRALIA :
Samsung Electronics Australia
7 Parkview Drive, Homebush Bay NSW 2127
Tel. 1300 362 603
Fax. (612) 9763 5750
CHINA :
Tel. 800-810-5858, 010- 6475 1880
Fax. 01.800.849.1743
HONG KONG :
Customer Service Center
11/F, Phase 2, MTL warehouse Building, Berth One,
Kwai Chung, N.T., Hong Kong
Tel. 2862 6001
Fax. 2862 6971
INDIA :
2nd fl CC-28 , Nehru Enclave Kalkaji New Delhi India
110019
Tel. 3030 8282
1600 1100 11
INDONESIA :
Pusat Pelayanan Purna Jual. PT.SEIN(Samsung Electronics Indonesia)
Jl. Raya Pasar Minggu No.34, Jakarta Selatan
Tel. 0800-112-8888
Fax. (021)797-5080
JAPAN :
Tel. 0120-327-527
Fax. 81-3-3527-5533
MALAYSIA :
Samsung Malaysia Electronics Sdn. Bhd.
3B-1-1. Level 1, Block 3B, Plaza Sentral, Jalan Stesen Sentral 5, KL Sentral , 50470, Kuala
Lumpur, Malaysia
Tel. 1800-88-9999
Fax. 03-22636759
PHILIPPINES :
Samsung Electronics Phils. Corp.
Ground Floor, Bonaventure Plaza, Ortigas Ave. Greenhills, San Juan
Download from Www.Somanuals.com. All Manuals Search And Download.
Tel. 1800-10-SAMSUNG (7267864)
SINGAPORE :
Samsung Asia Pte. Ltd.
20 Toh Guan Road Accord Distri Centre #01-01 Singapore 608839
Tel. 1800-SAMSUNG (7267864)
Fax. (65) 6565 7513
THAILAND :
Thai Samsung Electronics Co.,Ltd
Service Department 1,6 floor Boonmitr Building 138 Silom Rd.,
Suriyawong Bangrak Bangkok 10500
Tel. 1800-29-3232
02-689-3232
Fax. 02-689-3298
TAIWAN :
Tel. 0800-329-999
VIETNAM :
Tel. 1 800 588 889
Fax. (084) 08-8965566
SOUTH AFRICA :
Samsung Electronics South Africa (PTY) LTD
Unit 5/6, Hi Tech Villiage, Superior Road, Midrand
South Africa
Tel. 0860 726786 (SAMSUNG)
Fax. 27-11-545-6112
U.A.E :
Tel. 800SAMSUNG (7267864)
Fax. 009714 8837714
Terms
Dot Pitch
The image on a monitor is composed of red, green and blue dots. The closer the dots, the
higher the resolution. The distance between two dots of the same color is called the 'Dot
Download from Www.Somanuals.com. All Manuals Search And Download.
Pitch'. Unit: mm
Vertical Frequency
The screen must be redrawn several times per second in order to create and display an image
for the user. The frequency of this repetition per second is called Vertical Frequency or
Refresh Rate. Unit: Hz
Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz.
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the screen horizontally
is called Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal
Frequency. Unit: kHz
Interlace and Non-Interlace Methods
Showing the horizontal lines of the screen from the top to the bottom in order is called the
Non-Interlace method while showing odd lines and then even lines in turn is called the
Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a
clear image. The Interlace method is the same as that used in TVs.
Plug & Play
This is a function that provides the best quality screen for the user by allowing the computer
and the monitor to exchange information automatically. This monitor follows the international
standard VESA DDC for the Plug & Play function.
Resolution
The number of horizontal and vertical dots used to compose the screen image is called
'resolution'. This number shows the accuracy of the display. High resolution is good for
performing multiple tasks as more image information can be shown on the screen.
Example: If the resolution is 1024 X 768, this means the screen is composed of 1024
horizontal dots (horizontal resolution) and 768 vertical lines (vertical resolution).
MagicBright™
MagicBright is a monitor that provides a picture twice as bright and sharp than existing
monitors so as to provide a user environment more suited for documentation and internet
surfing. By using the button on the front panel of the monitor, you can easily set one of the 3
brightness and sharpness settings depending on your needs.
Authority
Information in this document is subject to change without notice.
© 2005 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Electronics
Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this material.
Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and
Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are
registered trademarks of Video Electronics Standard Association; the E
S
® name and
NERGY TAR
logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY
STAR® Partner, Samsung Electronics Co., Ltd. has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency. All other product names mentioned herein may be
the trademarks or registered trademarks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
Class B
This device is a Class B digital apparatus.
For Safety and EMC compliance guide, you may refer to "Regulatory" Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
|