1/3" Colour CCD
1/3" Colour CCD
High-resolution Camera
High-resolution Camera
Colour
PAL
VCC-6975P
Built in DSP (digital signal processing) circuit
Built in DSP (digital signal processing) circuit
Intelligent digital motion detector
Intelligent digital motion detector
x32 Electronic sensitivity (minimum illumination of 0.05 Lux)
x32 Electronic sensitivity (minimum illumination of 0.05 Lux)
x8 Digital zoom with digital pan and tilt
x8 Digital zoom with digital pan and tilt
480 TV lines of horizontal resolution
480 TV lines of horizontal resolution
SSP compatible
SSP compatible
Dual power operation, 24V AC / 12V DC
Dual power operation, 24V AC / 12V DC
Accredited
by the RvA
ISO 9001 REGISTERED FIRM
DNA Certification B. V., THE NETHERLANDS
Horizontal
TV Lines
SF-1407MV
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
x32 electronic sensitivity
Three types of white-balance adjustment
1) Automatic tracking mode to adjust white-balance as the light
(Colour temperature) at the monitoring point changes.
2) Push-and-lock mode to adjust white-balance when the set
button is pushed.
When the illuminance of the monitoring point drops down,
electronic sensitivity can be automatically increased to x32
(max.) to brighten up the image. The minimum illuminance on
the object is 0.05 Lux (using F1.2 lens) which makes it possi-
ble to obtain a clear picture with almost no light at all.
The automatic increase in gain can be set to x2, x4, x8, x16,
or x32.
3) Manual white-balance by adjusting R and B volume.
Camera ID display
The camera can even cope with a gradual and continuous
change in illuminance from day to night and maintains a crisp
picture by successive adjustments of the auto iris, auto gain
control, and electronic shutter.
An 8-character (max.) camera ID can be super-imposed on the
monitor. The user can change the display to any position on
the screen.
Three types of synchronization
Internal, line lock, or external sync. can be selected. Selection
= between internal and line lock sync. mode is done
on-screen. The camera automatically switches to external
sync. mode by receiving a VBS. (Line lock sync. mode is avail-
able only with 24V AC power supply.)
Dual power operation
24V AC or 12V DC applicable.
When the electronic sensitivity is set to ON
13 mode electronic shutter
High quality image with DSP
Short mode: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, and 1/10000 sec.
The adoption of a new DSP (Digital Signal Processor) has
brought up the quality standard of the monitored image for reli-
able surveillance.
Long mode: 2/50, 4/50, 8/50, 16/50, and 32/50 sec.
1) By digitizing the Colour processing, Colour reproduction has
been largely enhanced.
2) DSP maintains crisp borders and also restricts smear and
smudges of Colour. It further enables a wide choice of set-
tings to control the degree of edge compensation.
1/3" CCD image sensor with approx. 470,000 picture elements
480 TV lines of horizontal resolution
Electronic iris (indoor use)
On-screen settings
Camera settings can be easily controlled through on-screen
menus. A new setting will be reflected on the monitor to make
optimum settings easy.
Menu languages built in: English / French / Germany
S S P
x8 digital zoom with digital pan and tilt
Digital zoom of x2, x4, and x8, or continuous zooming up to x8
is available. The center of zooming can also be moved around
in all directions. Zooming can be controlled via SSP or by
means of a remote control circuit.
Security Serial Protocol
SSP (RS-485) compatibility
The whole security system, including the VCC-6975P, may be
controlled by a VSP-7000 system controller using a new com-
munication protocol SSP (Security Serial Protocol).
Remote control functionality on VSP-7000 includes all
on-screen menu items of the VCC-6975P.
Two types of backlight compensation with fine tuning
1) Multi-spot photometry mode setting
This mode enables the user to specify screen areas, among 32
blocks, in which illuminance measurements will not take place.
The picture display will be kept to optimum brightness accord-
ing to the illuminance measurements obtained in other areas.
SSP: Bi-directional communications (half duplex)
Maximum cable length for communication up to 1200 m (4000 feet)
Areas in which illuminance will
not be measured
VCC-6975P VCC-6975P VCC-6975P VCC-6975P
Up to 256
devices
Command
Alarm
2) 5-section photometry mode setting
The screen will be divided into 5 sections to which the user
will assign 15-scale weights.
The brightness of the picture will be kept at optimum by giving
priority to the area with the higher weight. (A DC type auto-iris
lens is required to enable this mode.)
Multiplexer
VCR
VSP-7000
An example of weight setting:
Top = 1, Bottom = 5, Left = 10,
Right = 10, Center (fixed) = 15.
The size and position of the cen-
ter area is adjustable.
1
15
5
10
10
System Controller VSP-7000 (sold separately)
Download from Www.Somanuals.com. All Manuals Search And Download.
VCC-6975P rear panel
Camera Set-up Unit
Video output terminal
VAC-60 (sold separately)
Type of coaxial cable and maximum length
• Cable type RG-59U (3C-2V), 250m maximum
• Cable type RG-6U (5C-2V), 500m maximum
• Cable type RG-11U (7C-2V), 600m maximum
Remote set-up makes you feel you have the camera right
beside your monitor. Capable of setting up VCC-6975P
for all on-screen menu items (intelligent digital motion
detector, backlight compensation, white-balance, etc.)
For better picture quality, disconnect this unit after
settings are completed.
Y/C signal output terminal
Type of coaxial cable and maximum length
• Mini-DIN round type 4-pin, 10m maximum
SSP terminal
Power supply terminals
24V AC and 12V DC dual power capability
eliminates limitations on camera location.
CURSOR
LENS
SET
Synchronization
signal input terminal
VCC-6975P
VCC-6975P
67
28
136
126.5
1
9.5
VAC-60 rear panel
CURSOR
ADJ. LOCK
DIGITAL
COLOR CCD CAMERA
LENS
SET
FLANGE BACK
LENS 4-pin
VAC-60
MODEL
Monitor
15.4
1/4"–20 UNC threaded hole
25.2
(Unit: mm)
VAC-60
(top / bottom selectable)
Video output terminal
Camera input terminal
Environmental conditions
Power requirement
Dimensions
BNC x 1
BNC x 1
Temperature: 0°C to 40°C [32°F to 104°F], Humidity: 10 to 90%
3V DC, Alkali type AAA format batteries x 2
90(W) x 135(H) x 36(D) mm [3.54(W) x 5.32(H) x 1.42(D) in.]
230 g [8.1 oz.]
MODEL
VCC-6975P
Scanning system
Image sensor
PAL standard 625 lines, 25 frames/sec.
1/3" (approx. 4.8 mm x 3.6 mm) interline transfer method CCD
Total: 795(H) x 596(V), Effective: 752(H) x 582(V)
480 TV lines
Weight (approx.)
Picture elements
Horizontal resolution
Approx. 0.05 Lux (F1.2, x32 electronic sensitivity)
Approx. 1.4 Lux (F1.2, normal mode)
ON / OFF ––– (on screen)
ON = x2 / x4 / x8 / x16 / x32 ––– (on screen)
1.0 V (p-p) (75 ohms, composite)
Minimum illumination
Electronic sensitivity
AC adaptor (for VCC-6975P)
VCA-35E (sold separately)
Video output level
Video S/N ratio
More than 48 dB
Multi-zone light measuring system
MODEL
VCA-35E
Power requirement
Power consumption (approx.)
Dimensions (approx.)
Weight (approx.)
220 ~ 230V AC, 50 Hz
17VA max.
Backlight compensation ON / OFF ––– (on screen)
ON = Multi-spot photometry / 5-section photometry ––– (on screen)
68(W) x 62(H) x 100(D) mm [2.68(W) x 2.44(H) x 3.94(D) in.]
680 g [24 oz.]
White balance
Gain control
Gamma
(TTL) ATW / AWC / Manual ––– (on screen)
ON (Automatic) / OFF ––– (on screen)
ON ( γ = 0.45) / OFF ––– (on screen)
Short mode: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec. ––– (on screen)
Long mode: 2/50, 4/50, 8/50, 16/50, 32/50 sec. ––– (on screen)
Optical auto iris lens / Electronic iris (indoor use)
CS / C mount (C mount: using C-mount adaptor supplied)
12.5 mm ±0.5 mm adjustment
Electronic shutter
Lenses for 1/3" CCD camera
Light control
Lens mount
Flange back
Auto iris lens
Super Wide-angle Lens
Wide-angle Lens
Standard Lens
x 6 Motorized Zoom Lens
VCL-CS2LYA
VCL-CS4LY
VCL-CS8LY
VA-TS6ZE-LY
VA-TS6ZME-LY
VA-TS10ZME-LY
VA-TS420PE-LY
VA-TS2VE-LY
x 10 Motorized Zoom Lens
Pinhole Lens
DC / VIDEO ––– Slide SW (side)
DC: Drive coil (+, -), Brake (Damp) coil (+, -)
VIDEO: +12 V DC (Max. 50 mA), Video output (high-impedance)
LEVEL: L~H ––– (on screen)
Auto iris output
x 6 Manual Zoom Lens
Vari-focal Lens
Lens iris level
Electronic iris
Electronic iris range
ON / OFF ––– (on screen)
1.4 Lux to 70,000 Lux (F1.2), 2.0 Lux to 100,000 Lux (F1.4)
Internal sync. / Line lock ––– (on screen)
External sync.
LINE PHASE ––– (on screen)
ON / OFF ––– (on screen)
Alarm out: RS485 (G, B, A) and ALARM (C, A)
ON / OFF ––– (on screen)
ON = Continuance (up to x8), Fix (x2 / x4 / x8), Pan / tilt operation
H, V, H/V, 3 mode reverse image
SSP corresponding devices As of March 2000
Synchronizing system
V phase adjustment
Motion detector
automatic switching
System Controller
SSP System Controller
VSP-7000
Multiplexer
16-channel Duplex Multiplexer (Colour)
MPX-CD162P
Electronic zoom
16-channel Duplex Multiplexer (B/W)
MPX-MD162P
Mirror image effect
Camera ID
9-channel Duplex Multiplexer (Colour)
MPX-CD92P
ON (up to 8 characters) / OFF ––– (on screen)
VIDEO OUT ––– BNC (rear)
Video signal
9-channel Simplex Multiplexer (B/W)
MPX-MS92P
Y/C signal out mini-DIN 4-pin (rear)
SSP (RS-485) RS485 (G, B, A) ––– Pushbutton terminal x 1 pair (rear)
Sockets Alarm signal ALARM (C, A) ––– Pushbutton terminal x 1 pair (rear)
External sync. VBS IN ––– BNC (rear)
Realtime VCR
168-hour Recording + Realtime VCR
SRT-7168P
SRT-6000P
40-hour Recording + Realtime VCR
Auto iris lens LENS ––– 4-pin (side)
Power supply 24V AC, GND ––– 3-pin terminal (rear) 12V DC ––– 2-pin terminal (rear)
Environmental conditions Temperature: -10°C to 50°C [14°F to 122°F], Humidity: within 90% RH
Time Lapse VCR
960-hour Recording Time Lapse VCR
Power requirement
24V AC, 50 Hz or 12V DC
TLS-9960P
TLS-9168P
TLS-9024P
Power consumption (approx.) 24V AC: 4.0 W (with auto iris lens), 12V DC: 4.1 W (with auto iris lens)
168-hour Recording Time Lapse VCR
Camera mount
1/4"–20 UNC (top / bottom selectable)
67(W) x 54(H) x 126.5(D) mm
[2.64(W) x 2.13(H) x 4.98(D) in.] (w/o camera & lens mounts)
470 g [16.6 oz.] (w/o lens)
24-hour Recording Time Lapse VCR
Dimensions (approx.)
Weight (approx.)
*More models will be introduced soon.
*Speciificattions ssubjectt to cchhaannggee wwiitthhoouutt nnoottiiccee
*Cautioon: please consult the instruction manual to ensure safe and proper operation of thee pprroodduucctt..
Distributed by:
SANYO Electric Co., Ltd.
Video Imaging Systems Division
©2000 SANYO Printed in Japan '00.3. AP
Download from Www.Somanuals.com. All Manuals Search And Download.
|