Sanyo Computer Monitor VMC 7321P User Guide

QUICK GUIDE  
Colour Monitor  
VMC-7314P  
VMC-7321P  
Please read this Instruction book before using your Monitor set.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION / GENERAL OPERATION  
Switching-on your TV  
Mains Supply  
To turn the monitor ON, press the Mains ON/OFF  
switch. The  
power indicator illuminates to show the power is on.  
F
AC Mains Outlet  
To turn the monitor OFF, press the Mains ON/OFF  
switch  
again.  
Connect the power cord of the monitor to a wall outlet.  
The monitor is prepared for a mains voltage AC220~240V, 50Hz.  
When the monitor is not to be used for an extended period of  
time, it is advisable to disconnect the power cord from the power  
outlet.  
Be sure to set the Mains On/Off button to the OFF  
position if a power failure occurs.  
If you find the power indicator flashing, please turn the  
monitor off completely with the Mains ON/OFF  
button and contact our service desk.  
This warning is a sign to let you know that the power  
protection function of this monitor is now operating.  
WARNING  
!
High voltages are used in the operation of this set.  
Refer to qualified service personnel  
AV Connection  
Control selection and adjustment  
F
Press the  
button repeatedly to select Volume, Brightness,  
Contrast, Colour, Sharpness. Press the  
or  
button to adjust  
VIDEO IN  
the selected control. When the control menu is not displayed, the  
AUDIO OUT AUDIO IN VIDEO OUT  
or  
button enable you to switch programme position.  
Volume : To adjust the sound volume.  
Brightness : To adjust the picture brightness.  
Contrast : To adjust the picture contrast.  
Colour : To adjust the picture colour.  
Sharpness : To adjust the picture sharpness.  
Tint : To adjust the colour phase. (This appears when NTSC  
signals are input.)  
Terminal  
Description  
VIDEO IN  
VIDEO OUT  
AUDIO IN  
AUDIO OUT  
BNC connector for video in.  
BNC connector for video out.  
BNC connector for audio in.  
BNC connector for audio out.  
Function key  
Remote sensor  
Mains On / Off  
switch  
-/+ Button levels up  
and down  
Standby light  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV SPECIFICATIONS / WARRANTY TO CUSTOMER  
TV specification  
VMC7314P  
VMC7321P  
Monitor specification  
Power source  
Sound output  
AC 220~240V 50Hz  
PAL,NTSC  
(continuous)(watts)  
1.5  
1.5  
Colour system  
Picture tube  
Input terminals  
Video IN  
(Diagonal) (cm)  
37  
34  
55  
51  
BNC connector  
RCA connector  
(Visible picture diagonal)  
Audio IN  
Output terminals  
Video OUT  
Audio OUT  
Dimensions  
BNC connector  
RCA connector  
(W x H x D mm)  
370 x 336.5 x 379  
9.0  
514 x 466 x 482  
19.0  
Weight (kg)  
Warranty to Customer  
Dear Customer.  
Sanyo U.K. Sales Ltd. (the company) warrants to the initial  
retail purchaser that if this equipment is or becomes  
defective and that, in the opinion of the Company, the defect  
is due to faulty material or workmanship the Company will,  
for a period of 12 calendar months from the date of sale to  
the original purchaser repair or replace, at its sole option,  
free of charge, any such defective component part of the  
equipment, always provided that:-  
Thank you for buying SANYO. This equipment should give  
you many years of pleasure and faithful service but in the  
event that a fault occurs, the following notes for you  
guidance may be helpful:-  
1: PLEASE RETAIN YOUR PURCHASE RECEIPT WHICH  
WILL BE REQUIRED FOR SERVICE DURING WARRANTY.  
2: If your Sanyo equipment proves faulty during the period  
of guarantee, take it or send it back to the dealer who  
originally supplied it together with this guarantee and the  
proof of purchase. We have made arrangements with our  
approved dealers under which they will carry out in  
guarantee service repairs on our behalf. In this way, we  
hope to reduce to a minimum the amount of time you will  
be without your equipment.  
3: If for some reason it is impossible to return the  
equipment to the original supplier, please contact our  
Service Department at the address below for further  
advice.  
1: The equipment has at all times been used in accordance  
with the operating instructions issued by the Company,  
and has not been connected to an electrical mains supply  
for which it has not been adjusted.  
2: Accidental damage or damage caused by negligence of  
misuse by the user, is specifically excluded.  
3: Unauthorised repairs, or any modification to the  
equipment which has not been expressly approved by the  
Company, shall render this warranty null and void.  
4: Failure due to fair wear and tear of any item is specifical-  
ly excluded.  
4: Should the equipment require servicing after the expiry  
of the guarantee period, take or send it to the original  
supplier or any other Sanyo dealer. He will be pleased  
to give you a quotation for the repair.  
This warranty is not transferable and is only applicable with-  
in the United Kingdom (and the Republic of Ireland).  
Nothing in this express warranty affects the statutory  
rights available to the purchaser of this equipment.  
Note: This warranty supersedes any other form of  
guarantee that may inadvertently have been enclosed with  
or attached to the product.  
Service Department,  
Sanyo UK Sales Ltd.,Sanyo House,Otterspool Way,Watford,  
Hertfordshire, WD2 8JX.  
Tel: 01923 246363  
Part No. SKP10324 C3MWW / C3LW  
Printed in U.K.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quinny Stroller DRU1087 User Guide
Reebok Fitness Treadmill RBTL12920 User Guide
Rheem Air Conditioner RSNA B Series User Guide
Ricoh Copier MP 1900 User Guide
Russound Speaker System CA 64i User Guide
Samsung Cell Phone Accessories SmartCam mobile User Guide
Samsung DVD Player VR330S User Guide
Samsung Flat Panel Television LE15S51B User Guide
SeaLand Computer Monitor TankWatch Level Monitor System User Guide
Sears Water Heater 153326362 30 GAL User Guide