Preface
Useful features
Thank you for purchasing the S750i colour LCD mobile phone. To obtain the best
results from your new phone we advise you to use only Sanyo approved accesso-
ries. Please read this guide before attempting to use the phone. In particular, be
sure to read “Safety Precautions” on pages 187 to 195. Failure to comply with the
instructions in the guide may cause serious harm or violate local laws. It is
recommended that you keep the guide in a safe place for future reference.
This sliding type phone with large TFT colour LCD display enables you to:
• Make and receive video calls.
• Take and send video images or colour, sepia or even black and white
photos using either of the two built-in smart cameras (1.3 megapixel rear
camera and 310 kilopixel front camera).
• Send and receive messages with video images, photos, or sound attached using
Picture Messages.
• Send and receive long messages with attached files using email.
• Use as a video player or an audio player.
• Take video images and photos in the dark using the built-in LED flash and
spotlight.
• Use a wide variety of data formats.
• Display a World Clock.
• Access Orange World or other web sites.
• Enjoy Java™ games.
• Transmit data via Bluetooth®, Infrared, or USB.
• Store data on a SD Memory Card.
Declaration of conformity
We, SANYO Electric Co., Ltd. of 1-1 Sanyo-cho, Daito City, Osaka Japan, declare
under our sole responsibility that the product S750i complies with the requirements
of Article 3.1 (a), 3.1 (b) and 3.2 of the R&TTE 1999/5/EC Directive, which is based
on the following standards, if used for its intended use.
Applied standards: EN 50360, EN 50361, EN 60950, EN 301 489-1, EN 301 489-
7, EN 301 489-17, EN 301 489-24, EN 301 511, EN 301 908-1, EN 301 908-2,
EN 300 328-2
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Icons on your display
All signals are off, except the
alarm and timer
Antenna
The more bars shown, the
stronger the signal.
The alarm clock has been set
and is on
Voice and data services
available
Infrared communication is in
progress
Voice and enhanced 3G data
services available
Basic
Operations
Indicates Bluetooth® mode is
on (Visibility is set to Always
Visible or Visible for 3Min.)
Indicates Bluetooth® mode is
on (Visibility is set to Hidden)
Indicates Bluetooth® transmis-
sion in progress
Battery level
Recharge your battery when the
charge indicator falls below the
second bar level.
Voice call in progress
Video call in progress
Indicates you are in roaming
service area.
A Java™ application is running
An SD card is inserted (write
protect lock is off).
All calls are set to be diverted
You have received a text/
email/picture message
You have received an Answer
Phone Message
An SD card is inserted (write
protect lock is on).
Indicates you have an unread
WAP push message.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Basic Operations
Basic Operations
Making a call by pressing a numeric
key once (Speed dial)
2
3
Press t or O to answer.
• You can also set the phone to
answer calls by sliding the phone
open. (See p. 121.)
• To divert your calls to another
Making a voice call or video
call
number, press [Divert] when an
incoming call is detected. See p.
128 for how to set specify the
destination number.
To make a call, just press a single-digit
corresponding to the registration
number (Quick Dial No.) in the Address
Book.
1
Slide open the phone and enter the
phone number you want to call (up
to 40 digits) using the numeric
keys.
Press y to end the call.
Note: To set a sound or photo for the
Operations during a call
specific caller, see p. 55.
• To erase a digit, use B. Press
and hold B to erase all digits.
• Press l after entering a number
and a cursor appears. Use l / r
to move the cursor where
required.
1
Enter the contact number
(corresponding to the registered
number between 2-9) in the
Address Book.
You can adjust the speaker volume,
change the sensitivity of the micro-
phone, or take a note during a call.
You may also reject the call even after
you answer it if you do not want to talk
to the person.
Operations just before you
answer
2
Press t to make a voice call.
Before answering the phone, you can
decrease or mute the ringer volume,
or disconnect the call when the phone
rings.
Note: If you press v instead of t key in
step 2, you can make a video call.
(See p. 28.)
2
3
Press t to make a voice call or
press v to make a video call.
Press y to end the call.
• To adjust the volume, press u / d while
on the phone.
• To access the Main menu, press O while
on the phone.
Note: You can make a call from Contacts
(see p. 61.) or from a Call History (see
p. 11.).
• To adjust the ringer volume, press u
/ d when the phone rings. To mute
the ringer, press B.
• To disconnect the incoming call if
you do not want to answer it, press
y.
Receiving a call
1
The ringer sounds, the backlight
flashes, and the message
“Incoming Call” flashes on the
display.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
Basic Operations
Basic Operations
• Press [Options] and select Whisper
and press O. To cancel the Whisper
Mode, press [Cancel].
Putting the call on hold (Hold)
• Press [Options], select Echo Party
Voice and press O.
Call History
This function enables you to hold the
call until you are ready to resume
talking.
The following instructions explain how
to redial or return calls using the Call
History.
Note: An empty black screen is transmitted
when you use this function during a
video call.
Notes: • Whisper Mode is automatically
cancelled after a call.
• Press [Hold] to put the call on hold. To
resume the call, press [Un-hold] (or t or
O).
• This function is not available for
video calls or when connecting to
a headset.
Opening the dialled/received/
missed call history
Entering a phone number in Call
Note or Address Book
Receiving a second call
• In Standby mode, press t. The
dialled call history appears. You can
jump to the missed call history by
pressing r. If you press l from the
dialled call history, you can go to the
received call history.
Muting your voice
You can directly enter a phone number
and store it in Call Note or Address
Book during a call.
In order to utilise this function, you
need to first go to the ‘Call Waiting’
settings menu and switch Voice to On
(see p. 131)
This function enables you to speak to
another person close by while listening
in on a phone conversation at the
same time.
1
2
Directly enter a number using the
numeric keys.
Press O, select Address Book or
Call Note, and press O.
• t: Press to put the first caller on standby
and speak with the second caller.
• O: Press to release the first caller’s call
and speak with the second caller.
• Press [Options], select Mute and
press O. To release mute, press
[Options] and select Unmute.
Redialling using the dialled call
history
Notes: • Up to five numbers can be stored
in Call Note.
• In Standby mode, press t, select
the number you want to redial and
press t to make a voice call. To
redial the last outgoing number,
press and hold t from the Standby
mode.
Whisper Mode
Anti-Nuisance Function
• For details about storing numbers
in the Address Book, see p. 54.
• For retrieving the stored numbers,
see p. 152.
You can raise the microphone
sensitivity to enable speaking in a soft
voice and still be heard.
This function enables you to reject the
incoming call by sending the caller’s
voice back.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
11
Basic Operations
Basic Operations
Calling back using the received call
history
Call History options
Setting your own security
code
Hands-free function
• Press [Options] in the Call History
display, select the option you want
to perform and press O. Note that
menu options vary according to the
type of Call History.
This function raises the sensitivity of
the microphone and the volume of the
speaker so that you can talk hands-
free while the phone is on a flat stable
surface. When using a hands-free
device, make sure it is within 20-30
cm of the phone.
1
In Standby mode, press t and then
press l.
See p. 126.
2
Select the number and press t to
make a voice call.
Profiles
Calling back using the missed call
history
When in public areas set up your
profiles so you can receive incoming
calls or messages without disturbing
others with loud ringer sounds. This
phone has seven types of Profiles, and
the one called Normal is selected at
the time of purchase. You can easily
mute the ringer sound or change the
Key Tone volume to suit your
Displaying the last call time/
total call time
1
In Standby mode, press t and then
press r.
Note: Your voice may not be clearly heard if
there is background noise and when
you are speaking some sound may
be clipped.
You can check the last call time or
total call time.
2
Select the number and press t to
make a voice call.
1
2
3
In Standby mode, press [Menu] to
go to the main menu.
Activating Hands-free function
Tip: If there are any missed calls, an icon
appears next to , in Standby
1
Press [Options] on the phone while
talking on the phone, select Hands-
free ON and press O.
• To deactivate hands-free, repeat
step 1 and select Hands-free
OFF.
Highlight
and press O, and
mode. Select
using d and press O
surroundings. For example, “Loud”
and “Outdoor” are useful when in
noisy surroundings.
and you can select a missed call
history.
select Call Time and press O.
Select Total Call Time or Call Time
and press O.
• To activate or deactivate the Profile,
press and hold B.
Note: The times are displayed in hours,
minutes, and seconds.
• To select the Profile type, see p.
108.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
13
Basic Operations
Basic Operations
Note: Phone must be closed to activate the
lock. To prevent unauthorised use,
see. P 124 on how to configure dial
lock.
Using a wired hands free headset
while Hands-free is activated
Calling a number with pauses
Using the Penlight
Example: If the number “P1234P5555”
is to be added after the phone
number.
You can use the LED as a penlight if
you need to illuminate an object in the
dark.
You can perform the functions below
by pressing and holding the earphone
switch.
1
2
Make the call.
Press . The first series of numbers
(1234) is sent.
Press . The second series of
Pause Dialling
• Receives a call when an incoming
call is detected.
• Makes a call in the standby mode.
• Cancels a call in the middle of
making a call.
• Ends a call.
• Resumes a call after putting the
other party on hold.
• Resumes a call with the second
party after putting him or her on hold
and talking with the third party or
switches between the second party
and the third party to talk with.
t
Switching ON the penlight
When using a push-button phone
service for a purpose such as
checking your bank account balance,
you need to send a series of numbers
with pauses after placing the call. The
S750i enables you to enter the whole
series of numbers first and then send
each set of numbers just by pressing
t.
1
2
Slide the phone open.
In Standby mode, press and hold
3
t
numbers (5555) is sent.
v
.
Changing the display
language
Locking or Unlocking the
Phone
1
In Standby mode, press [Menu],
To prevent accidentally pressing
keys/buttons
highlight
and press O, then
select Phone Settings and press
O.
Select Language and press O, then
select Display Language and press
O.
Select the language you want to use
from English, Français, Deutsch, and
Italiano.
Entering a phone number including
pauses
1
From your Standby display, press
and hold [Menu].
2
3
Press n twice after entering each set
of numbers. The character “P” is
inserted.
Note: Operation of the earphone switch
2
To unlock, press and hold [Unlock].
depends on the type of headset.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
15
Basic Operations
Basic Operations
Changing the font size
Changing between upper case and
lower case
Text entry
First Name
• Press [Options] in text input mode,
select Character Size and press O,
select the desired font size and
press O.
This phone uses three modes for text
and character input, Standard, T9
(Predictive), and Numeric. The
Standard and T9 modes are used for
entering text, and the Numeric mode
is used for entering numbers. The
language indicator at the bottom left of
the display shows the language you
are currently using, except in the
numeric input mode. For key
• Press ; in either T9 mode or
Standard text input mode. The case
status indicator at the left bottom of
Standard text input
mode
0/32
the display, (
,
, or
)
shows the characters you are
currently using.
Changing the input mode
Press and hold
; .
• Press and hold ;. In T9 mode,
appears at the centre bottom of the
display. In the numeric input mode,
appears.
:
:
Makes all the letters lower-case.
Capitalises the first letter of each
sentence and makes the rest
lower-case. If a sentence ends
with a period (.) followed by a
space, the phone automatically
capitalises the first letter of the
next sentence.
First Name
assignment, see the table on p. 23.
Tip: You can also change the input mode
by pressing [Options] and selecting
Input Method or Numeric Input in
text input mode.
0/32
Changing the input language
T9 input mode
OK
It is possible to enter text in another
language without changing the current
language mode setting default. E.g., to
enter a French word in English mode.
Press [Options] in the text input mode,
select Input Language, select the
desired language, and then press O.
Press and hold
; .
:
Capitalises all the letters.
First Name
Note: If
is not shown, but either
, or
appears, it indicates that
the Standard text input mode is used.
Numeric input mode
0/32
OK
Download from Www.Somanuals.com. All Manuals Search And Download.
16
17
Basic Operations
Basic Operations
Entering text in Standard text input
mode
For example:
(Change the input mode to Standard
input.)
• To enter the letter “o,” press 6 6
6.
• To enter the word “dog,” press 3,
666, 4.
• To enter the word “cat,” press
222, wait for a second,
press 2, and then press 8.
For example:
(Change the input mode to T9.)
Adding a word to the T9 dictionary
If you cannot find the right word in T9
mode use the following procedures to
enter the word. The word is added to
the T9 dictionary at the same time so
that you can find it the next time you
perform the same keystrokes.
•
To enter the word “Home”, press 4,
6, 6, 3. If your desired word
does not appear, press d or 0 to
display the word selection window.
Use the navigation keys to select
“home,” and press O.
You can enter a letter in Standard text
input mode by pressing the numeric key
on which the letter is printed. To enter
the first letter indicated on the numeric
key, press the key once. To enter the
second letter, press the key twice, and
so on. If you want to enter letters that are
on the same numeric key, wait for a
second until the bar cursor appears
before entering the next letter so that
your phone can process the previous
letter.
1
After pressing d to display the word
selection window in T9 mode, press
[Spell]. The Add Word window
appears and the input mode is
changed to Standard text input
mode.
Notes: • To accept the word as it is before
the word selection window
appears, the most common way
is to enter a space by pressing
n .
Entering text in T9 mode
The S750i supports a predictive text
input (T9) system that automatically
searches for and predicts the best
appropriate word by frequency of use.
You can thereby enter words much
faster and easier. When you are in T9
mode, just press each numeric key
once that contains the letters you want
to form a word. T9 then analyses your
key presses and attempts to complete
the word.
• If you do not see the right word
after pressing d from the T9 word
selection window, press the right
Soft key [Spell] to add the word to
the T9 dictionary. See below for
details.
2
3
Enter the word following the
Standard text input procedure.
Press [Insert]. The word is entered
and also stored in the T9 dictionary.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
19
Basic Operations
Basic Operations
Tip: It is also possible to add a word to the
T9 dictionary after the word is entered
using the Standard input mode.
Tip: From the window displaying a list of
symbols, press n to display
• Press and hold ; repeatedly until
Other Key Functions
the numeric mode indicator,
appears. To enter numbers in
Numeric mode, just press the
corresponding numeric key(s).
,
Entering a space
emoticons. Emoticons are categorized
and listed in another window. Press l
/ r or [Next Pg.] to switch to a
Placing the cursor at the beginning or
end of the word you want to add to
the T9 dictionary, press [Sel. Text],
highlight the word using the navigation
keys, and press [OK]. Select Save to
Dictionary and press O.
• In Standard text input or T9 mode,
press n.
different emoticon category.
• In Standard text input mode, press
the desired numeric key repeatedly
until it appears.
• You can also enter numbers by
pressing and holding the numeric
keys both in Standard text input or
in T9 modes.
Starting a new line
Deleting letters
• In Standard text input or T9 mode,
press n twice.
• Press B to backspace and delete
a single letter.
• Press and hold B to backspace
and delete an entire text field.
Re-selecting the word in T9 mode
Entering punctuation
You can re-select the accepted word.
Move the cursor backward and the
word becomes underlined. Press d
while underlined and the word
• In Standard text input mode, press
1 repeatedly to scroll through
commonly used punctuation:
. , - ? ! ‘ @ : /_ 1
Tip: You have another option to delete
letters. Place the cursor at the point to
or from where you wish to delete
letters. Then press [Options], select
Delete and press O, and then select
Delete before cursor, Delete after
cursor or Delete All.
Entering symbols
selection window re-appears.
1
Press and hold n in text input
mode. The symbol selection
window appears.
Entering an asterisk (*), or a pound
sign (#)
Entering numbers
The following indicates three different
methods of number entry.
2
Select the symbol and press O to
accept it and return to the
message entry field. Or you can
press [Continue] to enter the
selected symbol and retain the
symbol selection window to enter
another symbol.
• Change to Numeric mode, and
press the corresponding key on the
keypad.
Entering the plus (+) sign for interna-
tional calls
• Press and hold 0.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
21
Basic Operations
Basic Operations
Copying and Cutting
3
Select the data and press O. The
Key assignment on numeric keys (In standard input)
selected data is pasted.
Key
English
French
German
Italian
Copying or cutting a word
1
–
. , - ? ! ’ @ : / _ 1
A B C 2
a b c 2
. , - ? ! ’ @ : / _ 1
A B C Ç À Â Á Ä 2
a b c ç à â á ä 2
D E F É È Ê Ë 3
d e f é è ê ë 3
G H I Î Ï Í 4
. , - ? ! ’ @ : / _ 1
A B C Ä Á À 2
a b c ä á à 2
D E F É È 3
d e f é è 3
G H I 4
. , - ? ! ’ @ : / _ 1
A B C À 2
a b c à 2
D E F È É 3
d e f è é 3
G H I Ì 4
1
Place the cursor at where you want
to start copying or cutting from,
and press [Sel.Text].
Upper case
Lower case
Upper case
Lower case
Upper case
Lower case
Upper case
Lower case
Upper case
Lower case
Upper case
Lower case
Upper case
Lower case
Upper case
Lower case
Quick press
Press and hold
Undo feature
2
3
Press [Undo] after you have performed
a pasting or deleting operation to
cancel the operation.
D E F 3
d e f 3
2
Highlight the range you want to
copy or cut using the navigation
keys, and press [OK]. A menu
selection window appears.
G H I 4
4
g h i 4
g h i î ï í 4
g h i 4
g h i ì 4
J K L 5
J K L 5
J K L 5
J K L 5
5
6
j k l 5
j k l 5
j k l 5
j k l 5
3
Select Copy or Cut and press O.
The selected data is saved in the
Paste List, which is accessible from
the Options menu.
M N O 6
m n o 6
P Q R S 7
p q r s 7
T U V 8
t u v 8
M N O Ô Ó Ö Ñ 6
m n o ô ó ö ñ 6
P Q R S 7
M N O Ö 6
m n o ö 6
P Q R S 7
p q r s ß 7
T U V Ü 8
t u v ü 8
M N O Ò 6
m n o ò 6
P Q R S 7
p q r s 7
7
p q r s ß 7
T U V Ù Û Ú Ü 8
t u v ù û ú ü 8
W X Y Z 9
T U V Ù 8
t u v ù 8
8
9
Pasting a word
1
After copying or cutting a word or
sentence, place the cursor to
where you want to paste the
copied/cut part.
W X Y Z 9
w x y z 9
W X Y Z 9
w x y z 9
W X Y Z 9
w x y z 9
w x y z 9
0 (Note 1)
0
0 (Note 1)
0
0 (Note 1)
0
0 (Note 1)
0
0
Switch between
upper/lower case
Switch between
upper/lower case
Switch between
upper/lower case
Switch between
upper/lower case
2
Press [Options], select Paste Text
and press O. The data you just
copied or cut appears at the top of
the Paste Text list.
Quick press
;
n
Switch input mode
Space, New line
Switch input mode
Space, New line
Switch input mode
Space, New line
Switch input mode
Space, New line
Press and hold
Quick press
Symbol, Abbreviation Symbol, Abbreviation Symbol, Abbreviation Symbol, Abbreviation
Press and hold
Note 1: When using T9 mode, you can press 0 key while the word is being input (before its accepted) and
when you move the cursor back over an accepted word to display another list of selectable words.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
23
Video Call
Download from Www.Somanuals.com. All Manuals Search And Download.
24
25
Video Call
Video Call
You can view Video images of the
other caller and yourself during a call.
The other callers phone must be video
call compatible.
Image format
Making a video call
The display resolution is set to QCIF
format during a video call by default.
1
Slide open the phone and enter the
phone number you want to call (up
to 40 digits) using the numeric
keys.
Video call icon indicators
Display during a
video call
3G area
Within 3G area
During a video call
High speed
Format
QCIF
Screen size (Large / Small)
(L) 176 x 144 dots
(S) 78 x 64 dots (including frame)
Video call status
2
Press v. When the other party
answers the call, images of the
other party and yourself appear on
the display.
Image quality and
transmission speed
Normal
High quality
• You may not receive an image of
the other party if his or her phone
is not correctly set for video calls
even though their phone
Your own image is being sent
Alternative image is being sent
OFF
Sending image status
supports them.
Voice ON
Voice status
• If the other party does not have a
video call function, the video call
can automatically or manually be
switched to a voice call. You can
set this beforehand by selecting
Auto or Manual in Reconnection
Method Settings. (See p. 134.)
Voice OFF
Front camera lens
Rear camera lens
Normal magnification
Twice magnification
Camera used
Zooming
Hands-free function is activated. The icon
disappears when the function is not used.
3
Press
y
to end the call.
Hands-free function
Anti-nuisance
function
Anti-nuisance function is activated. The icon
disappears when the function is not used
Download from Www.Somanuals.com. All Manuals Search And Download.
26
27
Video Call
Video Call
Tip: You can make a call from Contacts
(See p. 61.) or from a Call History (See
below.). When using Contacts or a Call
History, you can call with the phone
closed.
Making a call pressing a numeric
key once (Speed dial)
Receiving a video call
Operations just before you
answer the video call
1
2
The ringer sounds, and the
backlight flashes.
Press t or O to answer the call.
• It may take sometime for images
of the other party and yourself to
appear on the display.
To make a video call, just press a
single-digit corresponding to the
registration number (Quick Dial No.) in
the Address Book.
The same operations are available
before you answer the video call as in
the voice call.
Redialling or calling back using the
Call History
• To adjust the ringer volume, press u
/ d.
• To mute the ringer, press B.
• To disconnect the incoming call if
you do not want to answer it, press
y .
• To divert your calls to another
number, press [Divert]. See p. 128
for how to specify the destination
number.
1
2
Enter the contact number (corre-
sponding to the registered number
between 2-9) in the Address Book.
Press v to make a video call.
Redialling using the dialled call history
• Using the Hands-free function
(See p. 13, 33 and 133), place
the handset close by on a flat
stable surface to hear the caller’s
voice. Hands-free automatically
raises both the sensitivity of the
microphone and the volume of
the speaker.
•
In Standby mode press
the phone number or name and
press or
t, select
v
.
Note: If you press t instead of v key in
step 2, you can make a voice call.
(See p. 8.)
Calling back using the received call
history
• In Standby mode, press t, press
l, select a phone number or name
3
Press y to end the call.
and press v or
.
Tip: For details about Call History, see p.
11. The icons in the Call History
indicate:
Video Call
Missed Call
Download from Www.Somanuals.com. All Manuals Search And Download.
28
29
Video Call
Video Call
Muting your voice
High Speed:
Suitable for fast
moving images.
For conventional use.
Best suited for non-
moving images.
Switching the Front/Rear camera
Operations during a video
call
This function deactivates the micro-
phone to mute your voice. This
enables you to speak with another
person close by and still listen in on
the conversation at the same time.
The camera can be switched from
front to rear or vice versa.
Normal:
High Quality:
During a video call, you can adjust
brightness, white balance, and image
quality. You can zoom and switch the
sent image between your own-image
and the available image as well as
choose and send video images stored
in the Media Album.
1
Press [Options], select Switch
Camera and press O.
• To reverse the setting, repeat
step 1.
Cancelling image transmission
• Press [Options], select Mute and
press O. To release mute, press
[Options] again and select Unmute.
Although, by default, your image is
sent in a video call, you have the
choice not to send your own-image.
The alternate image set at Alternate
Video is sent instead. See p. 134 for
setting the Alternate Image.
Note: You cannot use this function when
the phone is closed.
Switching the size and position of
the images
Indicating image priority
Zooming
You can adjust the image quality as
desired for display or when sending an
image.
You can zoom in or out on the image
you are sending.
The size and position of your own-
image can be switched to those of the
other party. By default, the other
party’s image is displayed larger than
yours and placed above yours.
1
Press v while your image is being
sent.
1
2
Press [Options], select Settings
and press O, then select Zoom
and press O.
Select Enlarge or Normal and
press O.
• To return to sending your own-
image, press v again.
1
2
Press [Options], select Settings
and press O, then select Image
Priority and press O.
Select from High Speed, Normal
or High Quality and press O.
Or press [Options], select Turn
• Press [Options], select Swap
Images and press O.
Camera OFF / Turn Camera ON and
press O to cancel image transmission
or to resume image transmission.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
31
Video Call
Video Call
Note: It is possible that the flicker may not
be removed completely even after
you changed this setting. However,
this is not considered to be a
Adjusting the brightness or white
balance
3
Press [YES].
• Press [Options], select Hands-free
ON and press O. To deactivate
hands-free, press [Options] again
and select Hands-free OFF.
• During the sending of video
image data you cannot talk on
the phone.
You can adjust the brightness or white
balance of the image you are sending.
problem with the phone.
Using Anti-Nuisance Function
Putting the call on hold (Hold)
1
2
Press [Options], select Settings
and press O, then select Flicker-
free and press O.
Select 50 Hz or 60 Hz and press
O.
1
Press [Options], select Settings
and press O, then select Bright-
ness or White Balance and press
O.
Adjust the brightness using u / d,
or adjust the white balance by
selecting Auto, Sunny, Cloudy,
Electric Light, Fluorescent 1, or
Fluorescent 2 and pressing O.
You can reject an incoming call by
sending the caller’s voice back with a
blank image.
This function turns OFF the micro-
phone and sends a recorded video
message to the caller until you are
ready to resume talking.
2
•
Press [Options], select Echo Party
Voice and press O. Press [Cancel]
to release the function and return
to talking.
Sending a video stored in the Media
Album
• Press [Hold]. Images of both the
other party and yourself disappear.
The recorded video message is sent
to the caller.
You can retrieve a video stored in the
phone and send it to the other party
during a video call. See p. 81 for
details about the Media Album.
Reducing flicker
Activating Hands-free
Note: After putting the call on hold, press
Occasionally the image may flicker due
to less than optimal local frequency.
You can use the “Flicker-free” function
to reduce this problem. Flicker is likely
to occur when you move between
areas using different frequencies (50
hertz or 60 hertz).
This function raises the sensitivity of
the microphone and increases the
volume of the speaker temporarily so
that you can talk hands-free with the
phone on flat stable surface. The
setting changed here returns to the
previous one when you finish the video
call. (See also p. 133)
[Un-hold] to resume talking.
1
2
Press [Options], select Send Video
Clip and press O.
Select a video in the Media Album
and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
33
Using the Still
and Video
Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
34
35
Using the Still and Video Camera
Using the Still and Video Camera
You can take still colour photos or
videos with the built-in front or rear
camera. Sending photos or videos via
Picture Message or Email is also
available. You can use both the phone
or removable memory (SD Card) to
save your favourites. For how to use a
SD Card, see p. 91.
Parts and names
Starting the still camera
Continuous:
Lighting Effects:
White Balance:
Cloudy
A) Front camera
Use the front camera lens to display
an image of yourself.
The image on the display appears
mirror-reversed.
• In Standby mode, press the left Soft
key [Camera]. (Or press [Menu],
Sunny
highlight
and press O.)
Electric Light
Fluorescent light 1
(white colour)
Fluorescent light 2
(daylight colour)
Still camera icons
Zoom:
B) Rear camera
Use the rear camera lens to display
images in front of you.
Zoom in
Brightness:
Zoom out
Note: Set the clock before using any
camera functions. Unless it is set, the
camera will not work. See p. 112 for
setting the clock.
Scene:
Night scene
light shielding
Storage Device:
Handset
Quality:
C) Flash/spotlight
SD Card
Fine Normal
indicates you can press 0 to
change the size to the following.
Small size
A
B
Superfine
Image Size:
Large size
C
Orientation:
(See the note below.)
Shutter:
(Press O.)
Note: When using VGA & SXGA sizes, turn
the phone on its side with the
headset connector facing up when
taking a photo to display using
normal orientation after the photo is
taken.
Note: Not all icons are displayed at the
same time. If no operation is
• When the phone is closed, the rear
camera is not available.
performed for about 2 minutes, the
phone returns to the Standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
37
Using the Still and Video Camera
Using the Still and Video Camera
Starting the video camera
Zoom:
Zoom in
Brightness:
Storage Device:
Handset
3
Press O to take a photo. A preview
is displayed before saving.
• To retake another and disregard
the current photo, press B and
press [Yes] corresponding to the
confirmation dialogue. The
display returns to the viewfinder
in the camera mode.
Press O to save the photo or wait
for a while and the photo is
automatically saved.
• To view the photo you have
saved, go to the Picture Album
from [Options].
Still camera
Zoom out
• In Standby mode, press the left soft
key twice ([Camera] → [Video]). (Or
press [Menu], highlight
press O, then press [Video] )
Besides taking and sending a single
photo, you can take continuous-frame
photos, select the best one and send
it.
and
SD Card
Quality:
Superfine
Fine
Normal
Tip: You can switch between the still
camera and the video camera mode
by pressing the left Soft key while in
the video camera or still camera mode.
Image Size:
Lighting Effects:
White Balance:
Cloudy
Taking a photo
4
1
Slide open the phone and press
the left Soft key [Camera] to access
the still camera mode.
Sunny
Video camera icons
Electric Light
Fluorescent light 1
(white colour)
Fluorescent light 2
(daylight colour)
2
Aim at a subject using the display
as a viewfinder. If you press
[Camera] when the phone is
closed, only the front camera is
usable.
•
The photo may not be stored
depending on the size of the data
and the remaining memory. It is
recommended that you delete any
unneeded data in the Picture
Album before taking a photo.
Recording voice:
Camera
indicates you can press 0 to
change the size to the following.
Small size:
Large size:
PAUSE:
(Press O.)
END:
(Press the left soft key.)
Download from Www.Somanuals.com. All Manuals Search And Download.
38
39
Using the Still and Video Camera
Using the Still and Video Camera
Tip: If you press and hold O to save a
photo in step 4 above, the folder
selection window appears, and you
can select the Picture folder or another
folder if you have created one. (See p.
82.)
Sending a photo via Bluetooth or
Infrared
Taking Continuous-frame photos (for
still camera only)
To select and save a photo from the
continuous-frame taken photos
If you want to only select a specific
photo to save, select the desired
thumbnail photo after taking the
continuous frame photos and press O
before pressing [Save All]. The
selected photo is displayed enlarged.
Use l / r (or n or ;) from this
display to view the other continuous
frame photos taken. Press O again to
save the displayed photo.
Before using this function, be sure to
activate reception mode on the
receiving device. (When you are using
an S750i as the other receiving device,
see pp. 172 when using Bluetooth and
181 when using infrared to receive
data.)
This feature is not available for image
sizes VGA and SXGA. The number of
shots can be selected from 16 or 9.
For 9 shots, there are 3 levels of
Sending a photo attached to a
Picture Message or an Email before
saving it
continuous-frame shooting speeds.
1
2
Press [Options] while focused on a
subject, select Continuous and
press O.
Refer to “Cautions” for infrared
transmission (See p. 179.)
As soon as you have taken a photo
you can attach it to a Picture Message
or an Email.
Select the number of shot
1
2
Press [Send] after taking the photo.
Bluetooth transmission: Select
Send via Bluetooth →
Press O → Press
combinations and continuous-
frame shooting speeds from 16
Shots, 9 Shots (Fast), 9 Shots
(Mid), and 9 Shots (Slow). The
display changes to a viewfinder.
Press O to take the photos. After
all the photos are processed, they
are displayed in a thumbnail format.
Press [Save All] to save.
Note: Soft key indicators are removed from
the display if that photo is saved so
that you can tell which photos are
already saved.
1
2
Press [Send] after taking the photo.
Select Attach to Message and
press O.
[Search] → Follow the
procedures from step 7
on page 169.
3
Select the message type and press
O. The display turns into a
message creation screen.
3
4
To save all the photos in one file
You can save continuous-frame taken
photos in thumbnail form in one file.
This enables you to view all the
Infrared transmission: Select Send
via Infrared → Press O
Select Save and press O on the
receiving device.
3
continuous-frame photos at once.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
41
Using the Still and Video Camera
Using the Still and Video Camera
• Press [Options], after taking the
photos and select Save as One
image, then press [Yes].
• The video may not be stored
Sending a video attached to a
Picture Message or an Email before
saving it
2
Refer to the procedures from step
2 “Sending a photo via Bluetooth
or Infrared” on p. 40.
depending on the size of the data
and the remaining memory. It is
recommended that you delete
any unneeded data in the Video
Album before recording.
As soon as you finish shooting a video
you can attach it to a Picture Message
or an Email.
Note: The pairing device’s Infrared
reception mode must be turned on
before sending. (See p. 181.)
Video camera
Note: You can change the video recording
Recording a video
1
2
3
Press [Send] after shooting the
video.
Select Attach to Message and
press O.
Select the message type and press
O. The display turns into a
message creation screen.
default time. See p. 47 for details.
Saving the video in the Media
Album
1
Slide open the phone and press
the left Soft key twice ([Camera] →
[Video]).
Tip: If you press and hold O to save a
video in step 4 above, the folder
selection window appears, and you
can select the Video List folder or
another folder if you have created one.
(See p. 82.)
1
Press and hold O just after
shooting a video.
2
3
Aim at a subject using the display
as a viewfinder.
Press O to start recording.
• To stop the video camera, press
.
2
Select the Video List folder or
another folder if you have created
one and press O.
Sending a video via Bluetooth or
Infrared
Taking photos while recording a
video
• You can press O while shooting
to pause the recording. Press O
again to continue recording.
Press O to save the video or wait
for a while and the video is
automatically saved.
Operations while taking a
photo or recording a video
As soon as you finish shooting a video
you can transmit it via Bluetooth or
Infrared.
While shooting a video, you can
capture a still image just by pressing
[Grab]. It is automatically saved in the
Picture folder after you have saved the
video. Up to 9 still images can be
captured from a video recording.
4
You can adjust brightness, adjust zoom
or white balance, adjust the photo or
video data quality, and other features
using the keys indicated in the table
below.
1
Press [Send] after pressing
stop the video camera.
to
• To view the video you have
saved, go to the Video Album
from [Options].
Download from Www.Somanuals.com. All Manuals Search And Download.
42
43
Using the Still and Video Camera
Using the Still and Video Camera
Shortcut keys for adjusting zooming or brightness and other items
Taking a self portrait using the front
camera lens
1
2
Press [Options] while monitoring a
subject, select Camera Settings
and press O, select Lighting
Effects and press O.
Select a flash function (for still
camera only) from Auto Flash and
Flash ON, or select the illumination
duration from Light (5 Min), Light
(3 Min), and Light (1 Min). If you
do not want any lighting effects,
select OFF.
Key (While
monitoring)
Function
1
Press [Options] while monitoring a
subject, select Switch Camera
and press O.
Brightness
(11 levels)
r : Makes the display brighter.
l : Makes the display darker.
l / r
u : Zoom in
d : Zoom out
• Press and hold
u / d to zoom
in/out quicker.
2
3
Select Front and press O.
Select either camera or video
recording using the soft keys.
Zoom
u / d
(Not available for the SXGA size photo)
v
Adjusts the white balance.
In the still camera mode, switches the flash or light as follows:
Auto Flash →Flash ON →Light (5 Min.) →OFF →Back to Auto Flash again.
In the video camera mode, switches the light as follows:
Light (5 Min.) →OFF →Back to Light (5 Min.) again.
Note: You can also press n to change the
camera lens from one side to
another.
;
Changes the image size between QQVGA, QVGA, VGA, and SXGA.
• While the front camera is used, SXGA is unavailable.
• While shooting a video, the image size can be switched between SQCIF and QCIF.
Note: You can also press ; in the still or
video camera mode to activate the
flash/spotlight.
w
Using the flash or spotlight
n
Switches the camera.
Various lighting functions are available.
“Auto Flash” enables the phone to
automatically switch on the light when
a photo is being taken in dark
surroundings.
0
Changes the display size; available when
is displayed, e.g., when the QQVGA size is used.
Showing the image in the viewfinder
at full-screen size
Switching the camera
If the phone is closed, only the front
camera lens can be used. When the
phone is open, you can select either
the camera lens.
• Press 0 while monitoring a
subject when the
displayed.
icon is
Download from Www.Somanuals.com. All Manuals Search And Download.
44
45
Using the Still and Video Camera
Using the Still and Video Camera
Setting the image quality
Adjusting the video/photo
Adjusting lighting compensation
Using the self-timer
(For still camera only)
1
Press [Options] while monitoring a
subject, select Image Settings
(Video Settings) and press O, and
then select Quality and press O.
Select Superfine, Fine, or Normal
and press O.
The colour of a photo can differ
1
Press [Options] while monitoring a
subject, select Camera Settings
and press O, and then select Self-
timer and press O.
Select a time before the shutter is
released from 10 Sec., 5 Sec., or 2
Sec., and press O.
depending on the lighting source, be it
natural or incandescent light. You can
compensate for the difference by using
the white balance to adjust the colour.
Your S750i is able to adjust the lens
exposure to suit various scenes. By
default, Normal is used.
2
2
3
1
Press [Options] while monitoring a
subject, select Image Settings and
press O, and then select Scene
and press O.
1
Press [Options] while monitoring a
subject, select Image Settings
(Video Settings) and press O, and
then select White Balance and
press O.
Superfine: Highest image quality but
large file size. Not recom-
mended if you want to save
many files as it consumes
more memory.
Press O to start the countdown.
Note: A beep sounds once every second
starting 3 seconds before the shutter
is released.
2
Select Normal, Night Scene, or
2
Select the white balance type from
the following options and press O.
• White balance options: Auto,
Sunny, Cloudy, Electric Light,
Fluorescent 1, and Fluorescent 2.
Light Shielding and press O.
Fine:
Highly detailed image
quality.
Setting the shooting time (For video
camera only)
Normal: Standard image quality and
relatively small file size so
This function allows you to set the
duration of a video recording time. The
recording stops automatically after the
set time. The default is 20 seconds.
you can save many files.
Note: You can also adjust the white balance
by pressing v while monitoring the
subject.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
47
Using the Still and Video Camera
Using the Still and Video Camera
Notes:
1
2
Press [Options] while monitoring a
subject in the video camera mode,
select Shooting Time and press
O.
Select a recording time from 5
Sec., 10 Sec., 20 Sec., 30 (50 or
60) Sec. or Maximum and press
O.
1
Press [Options] while monitoring a
subject, select Image Settings and
press O, and then select Frame
and press O.
Select ON and press O. A frame
appears.
Press [Prev.] or [Next] to change
the frame pattern and press O to
select.
2
3
Select ON and press O. The
screen turns to Sepia colour.
Press [Prev.] or [Next] to change
the special effects and press O to
select.
The available patterns are: Sepia,
Black and White, Red, Green, Blue,
Purple and Negative.
• You can also press w while the still
camera or video camera is activated, and
the data size will change as follows:
• In the still camera mode: QQVGA
(120*160) → QVGA (240*320) → VGA
(640*480) → SXGA (1280*960,
unavailable for the front camera lens) →
Back to QQVGA (120*160) again.
• In the video camera mode: SQCIF
(128*96) → QCIF (176*144) → Back to
SQCIF (128*96) again.
2
3
4
Note: The available maximum recording
time is displayed when Maximum is
set. This time varies according to the
video data quality. The higher the
quality is, the shorter the recording
time is.
Inserting time and date (Date
Stamp) (For still camera only)
Changing the photo (video data)
saving size
Adding special effects to a photo/
video
This function enables you to add time
and date to a QQVGA or QVGA sized
still image.
You can select photo (video data) size
to store. The larger the size is, the
better the data quality is.
You can make the subject look
different by adding special and artistic
effects.
Taking a photo with a frame (For still
camera only)
1
Press [Options] while monitoring a
subject, select Image Settings and
press O, and then select Date
Stamp and press O.
1
Press [Options] while monitoring a
subject, select Image Settings
(Video Settings) and press O, and
then select Image Size and press
O.
You can add a frame to a photo before
it is taken. Note that when a photo is
taken with a frame, you cannot
remove the frame afterwards. Image
setting must be on QQVGA, or QVGA.
1
Press [Options] while monitoring a
subject, select Image Settings
(Video Settings) and press O, and
then select Special Effects and
press O.
2
Select a photo size (video data
size) and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
49
Using the Still and Video Camera
Using the Still and Video Camera
2
Select a pattern from DDMMYY,
HH:MM or DDMMYY HH:MM and
Setting a shutter capture tone
1
2
Press [Options] while monitoring a
Selecting the storage location (SD
Card or Handset)
subject, select Camera Settings
and press O, and then select
Flicker-free and press O.
Select 50 Hz or 60 Hz and press
O.
1
Press [Options] while monitoring a
subject, select Camera Settings
and press O, then select Shutter
Tone and press O.
press
O. If you select OFF, no date
Before saving, you can select to save
your photos or videos either on the
handset or on the inserted SD Card.
stamp is made.
• You can also change the date
stamp colour. To do this, press
[Prev.] or [Next].
2
Select a shutter tone pattern and
press O.
1
Press [Options] while monitoring a
subject, select Camera Settings
and press O, and then select
Storage Device and press O.
Select Handset or Memory Card
and press O.
Adding skins to the edge of the
photo or video
Recording a video without sound
(For video camera only)
Reducing flicker
You can add or change the skin
(frame) of a photo or video (only
available for QQVGA sized photo when
you use the still camera function.).
Occasionally the image may flicker due to
less than optimal local frequency. You can
use the “Flicker-free” function to reduce
this problem. Flicker is likely to occur
when you move between areas using
different frequencies (50 hertz or 60 hertz).
2
1
Press [Options] while monitoring a
subject, select Video Settings and
press O.
Select Voice and press O, then
select OFF and press O.
2
Checking the remaining memory
1
Press [Options] while monitoring a
subject, select Camera Settings
and press O, then select Skins
and press O.
Press [Prev.] or [Next] to change
the skin type and press O to
select.
You can check how much memory has
been used and remains for storing as
a percentage and in megabytes.
Note: It is possible that the flicker may not
be eliminated completely even after
the setting has been changed.
2
1
Press [Options] while monitoring a
subject, select Usage Status and
press O.
However, this is not considered to be
a problem with the phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
51
Using the Still and Video Camera
• You can switch between
Managing stored images
checking the remaining memory
on the handset and on the SD
Card by pressing [Handset] or
[SDCard].
Accessing the Picture Album and
the Video Album
• In Standby mode, press [Menu],
highlight
and press O.
Referring to the on-screen Key
Guide
Address Book
For details about operations on stored
photos or videos, see pp. 81 to 89 in
the Media Album section.
Press [Options] while monitoring a
subject, select Key Guide and press
O. Use u / d to view other guidance
items. Press O or B to return to the
monitoring (or recording) display.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
53
Address Book
Address Book
The Address Book consists of
3
Press [Save] when finished
entering.
Other page
Creating a new contact
Nickname
Job title
Contacts, Call History, and Owner
Information. You can store information
about people you frequently call in
Contacts, and your own information in
Owner Information. In Contacts, you
can store multiple phone numbers,
email addresses, street addresses,
web pages, and other information
such as birthdays or anniversary
dates. You can also use Contacts to
dial phone numbers and compose
email, Text or Picture messages
directly. Contacts on the handset are
stored from Contact numbers 250 to
749, Contacts on the USIM are stored
from 0 to 249. The location of the
Contact number and the number of
Contacts that can be saved may be
different depending on your USIM
card.
Address Book
Other
1
• In Standby mode, highlight
using d and press O, and then
select New Contact and press
O. Or
[Nickname]
[Job Title]
[Birthday]
[Address 1]
[URL]
Birthday
Entry items and icons in a contact
Street address
Web page (URL)
Note
Main contact page
[Note]
First name
Makes the contact a
private entry.
• In Standby mode, press l / r,
press [Options], select New
Contact, and then press O.
Select the desired item and press
O to enter the information for the
new contact.
OFF
Last name
Company name
Phone number
• For contacts saved on the SIM/
USIM card, you cannot store the last
name and the company name as
well as items in the Personalised
page and Other page above.
Email address
Group
2
Image
Contact Location
• Contact information stored on
the phone consists of three
windows. Press r, to display the
second window (Personalised
page) and enter the desired
information. Press r again, to
display the third window (Other
page), and enter/modify desired
information. Contacts on the
SIM/USIM card are limited to first
page items only.
Personalised page
• When assigning a Contact Location
(Quick Dial No.), the smallest
Sets a ringtone for a
voice call when ON.
Sets a ringtone for a
video call when ON.
Sets a ringtone for
Text Message when
ON.
Address Book
Personalised
OFF
available number on the handset’s
memory is automatically assigned
when you start creating a new
Address Book entry. If you want to
edit the number, use u / d or enter
numbers directly into the entry fields.
(Limited to 3 digits).
OFF
OFF
OFF
OFF
Sets a ringtone for
Picture Message when
ON.
Sets a ringtone for
email when ON.
To go to a Contact Location from 0
to 249, press [Copy to].
Download from Www.Somanuals.com. All Manuals Search And Download.
54
55
Address Book
Address Book
Viewing or editing a contact
Creating or editing a contact from
other functions
3
4
Select the group you want to edit
and press O. The Group Details
display appears.
• Refer to steps described on p.
114 for how to set a notification
pattern.
Assigning the contact to a
group
1
2
3
In Standby mode, press l / r to
access the Contacts List.
Highlight the contact to view, press
O, and press [Edit].
Highlight the item to change and
press O. Use l / r to switch to a
different contact screen (available
for contacts stored on the phone),
if you want to edit the notification
sound setting or other items such
as street addresses or note etc.
Make the changes and press
[Save].
For example, after entering a phone
number in Standby mode, you can
press O to go to the contact creation
step. From other functions such as
dialled call history, press [Options],
select Save to Address Book and
you can go to the contact creation
step. In these cases, you will be asked
to select from New Contact or Add to
Contact. Select New Contact to
make a new contact or select Add to
Contact to edit the existing contact.
If you assign each contact to a group,
searching contacts becomes a lot
easier. You can set the same type of
notification sound to the same group
of people. By default, a new contact is
assigned to Group 0.
Press [Save] to complete the setting.
1
2
3
Open a contact, press [Edit], then
select and press O.
Select the group that you want to
assign the contact to and press O.
Press [Save].
4
Editing the group name or assigning
a group notification pattern
1
Select a contact in the Contacts
List display and press [Options].
Select Address Book Settings
and press O, and then select
Manage Groups and press O.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
56
57
Address Book
Address Book
Note: You can set sound, volume, display
pattern, and notification durations for
the notification pattern.
Changes the icon to your
favourite
Edits the group name
Assigns a notification pattern to
the group for when you receive a
voice call from the group.
Assigns a notification pattern to
the group for when you receive a
video call from the group.
Accessing the Contacts List
• In Standby mode, press l / r.
The Contacts List
The Contacts List displays the names
of your contacts in alphabetical order.
If you want, you can sort the Contacts
List in several other ways to make
searching easier according to the
situation.
• In Standby mode, select
using d
and press O, and then select
Address Book and press O.
• In Standby mode, press [Menu],
highlight
and press O, then
select Contacts List and press O.
Assigns a notification pattern to
the group for when you receive a
Text Message from the group.
Assigns a notification pattern to
the group for when you receive a
Picture Message from the group.
Assigns a notification pattern to
the group for when you receive an
email from the group.
Caution: Always keep a hard copy of the
Contacts information separately
or transfer them to your PC using
Bluetooth or Infrared, since data
stored in Contacts in your phone
memory may be lost in rare cases
of accidental malfunction or if the
battery is not installed for a long
time.
Searching the Contacts List
1
Press [Options] in the Contacts List
display, select Search, and then
press O.
2
3
Select the desired Search
parameters and press O.
Select the desired contact.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
59
Address Book
Address Book
Tip: You also can open the Contacts List in
alphabetical order by pressing and
holding the corresponding numeric key
from the Standby display. For example,
for “John,” press and hold 5 in
Standby mode. At this display, you can
press [Switch] to switch the list order
to a call frequency ordered list or
alphabetical ordered list within the
alphabet characters allocated to that
key.
Calling a contact from the Contacts
List using ABC Search mode
Calling a contact from a contact
display
Finding a contact by entering a
name
1
In Standby mode, press l / r to
open the Contacts List.
1
2
3
In Standby mode, press l / r to
open the Contacts List.
Select the contact, and press O to
open the contact.
Select the number to call, and;
• Press t to make a voice call. Or
Enter the person's first name (as long
as it's registered in your Address
Book) and select the entry by pressing
O. Even entering the first couple of
letters of the person's first name and
pressing O will work for this search.
2
Press the numeric key on which the
first letter of the contact’s first
name is printed. For example, for
“John,” press 5. The cursor
moves to the corresponding name
group J, K, and L in alphabetical
order.
• Press
call.
or v to make a video
1
2
In Standby mode, press l / r to
open the Contacts List.
Press [Options], select Search and
press O, and then select Name
Search and press O.
3
Select the contact to call and,
• Press t to make a voice call. Or
• Press
or v to make a video
call. Your phone will call the
3
Enter the name and press O.
Contacts corresponding to the
name are displayed.
person’s default number. To call
other phone numbers the person
has, open the contact and select
a number. See “Calling a contact
from a contact display” as stated
below.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
61
Address Book
Address Book
Deleting a contact, all contacts or
selecting a contact to delete
Setting the contact as a private
entry
Sending a message from a contact
Registering a contact as a Schedule
entry
1
Open the contact to which you
want to send a message, or select
the contact in the Contacts List.
Press [Options], select Create
Message and press O.
Select a phone number or email
address you want to send the
message to and press O.
Select the message type and press
O.
1
In Standby mode, press l / r to
open the Contacts List.
Use this feature after setting Privacy
Mode to ON. If Privacy Mode is set to
OFF (default), the private setting icon
will not appear. For details about
Privacy Mode, see p. 125.
You can register a future event for
notification such as a birthday etc.
2
Select the contact to delete, press
[Options], then select Delete and
press O. A selection window
appears.
2
3
1
2
Open the contact you want to
register as a Schedule entry.
Press [Options], scroll down to
Save to Schedule, and then press
O. You have two saving options;
Save as Normal and Save as
Private.
3
• To delete one, select Delete and
press O. Then press [Yes] to
confirm.
1
2
Open the contact display you want
to hide from others.
Press l to go to the screen titled
Other, press [Edit] and then select
and press O.
4
5
• To delete all, select Delete All,
enter your security code and
press [Yes] to confirm.
• To delete selected, select Delete
Multiple, mark the contacts to
delete by pressing O, and then
press [OK]. Press [Yes] to
confirm.
A new message creation display
appears. Follow the steps
described on p. 68.
3
Select Save as Private if you want
to save it as a private entry and
select Save as Normal if you want
to save as a general entry.
3
Select ON and press O. Press
[Save]. Now the contact is saved
as a private entry. To hide the
contact, go to Privacy Mode and
select OFF. If you want to display
these private contacts, set Privacy
Mode to ON.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
63
Address Book
Address Book
Entry items and icons
Sending your Owner Information
Owner Information
• Use l / r to change between
pages.
1
Open the Owner Information
display and press [Options].
Select Send vCard and press O.
Select Attach to Message and
press O.
Press [Yes], if you have no picture
set in your Owner Information
settings. If you do have a picture
set, select either With image or
Without image and press O.
Select Picture Message or Email
and press O.
Enter a phone number or email
address in the To: field and press
O.
Enter your message in the Subject:
and message fields if necessary
and press O after each.
Saving your own information (Owner
Information)
2
3
Own Info 1 page
First Name
1
In Standby mode, press [Menu],
select and press O.
Last Name
Company
Job Title
Phone number 1
Email Address 1
Image
4
2
Select Owner Information and
press O. The Owner Information
display (Owner Info 1 page)
appears with the number of your
phone inserted.
5
6
Own Info 2 page
Phone number 2
Phone number 3
Phone number 4
Phone number 5
Email Address 2
Address 1
3
4
5
Press [Options], select Edit and
press O.
Enter your security code and press
O.
Select the item and press O to edit
each item. See below for entry
items.
7
Additional Info page
6
7
After editing each item, press O.
Press [Save] to complete editing.
Address 2
Note
Birthday
URL
Download from Www.Somanuals.com. All Manuals Search And Download.
64
65
Messaging
Download from Www.Somanuals.com. All Manuals Search And Download.
66
67
Messaging
Messaging
4
5
Highlight the message field and
enter your message text, then
press O when finished.
Press [Send].
Creating an Picture Message
General Information
Creating a new message
You can send messages with photos,
videos, sound or slides.
The S750i supports various types of
messaging services such as Text
messaging, Picture Messaging, and
Email. With Picture Messaging you can
create, insert and send pictures or
videos. Using the Email services, you
can attach several files such as
pictures, videos, or sound files and
send them to any desired email
address. You may need to subscribe
for an email account in order to use
email. Contact your nearest Orange
stockist. You need to first setup your
email account in order to use email.
See p. 28 in the “get started with your
Sanyo S750i” guide.
1
In Standby mode, press [Menu],
highlight
and press O, and
then select New Message and
press O.
Inserting a still image into a message
1
Highlight the message field, press
[Options], select Picture and press
O.
2
Select From Media Album to
retrieve a stored photo or select
Take Picture to take a photo and
insert it into the message.
Inserting a video into a message
2
Select the message type from Text
Message, Picture Message, or
Email and press O.
1
Highlight the message field, press
[Options], select Sound & Video
and press O.
3
Press O and enter the recipient’s
phone number or email address in
the To: field.
2
Select Select Video to retrieve a
stored video or Video Recorder to
shoot a video and insert it into the
message.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
69
Messaging
Messaging
Attaching a sound or your voice to a
message
Setting the transition time for slides
Sending a message from a contact
Useful message functions
By default, the transition time for slides
is set to five second. You can change
this duration.
1
Open the display of the contact to
which you want to send a
message, or select the contact in
the Contacts List.
Adding a signature to the message
1
Highlight the message field, press
[Options], select Sound & Video
and press O.
Your name, company, job title, phone
number or email address can be
added to your message as a signa-
ture.
2
Select Select Sound to retrieve a
stored sound or select Voice
Recorder to start recording and
attach it to the message.
1
Highlight the message field, press
[Options], select Slide and press
O.
2
3
4
5
6
Press [Options], select Create
Message and press O.
Select a phone number or email
address and press O.
Select Text Message, Picture
Message, or Email and press O.
Enter message content in the
message field and press O.
Press [Send].
• To edit or set a signature to On, go
to Look & Feel settings. (See p. 79.)
Select Personalisation and press
O, and select Edit Signature and
press O. Press [Edit], edit the
current signature and press O, then
press [Save]. After entering/editing
your signature, set Enable/Disable
Signature on the Personalisation
display to Always. It will now be
automatically added to any new
message you create.
2
3
Select Slide Interval and press O.
Enter the time in seconds (1-60)
and press O.
Inserting slide pages
1
Highlight the message field, press
[Options], select Slide and press
O.
Changing the text colour or size
1
Highlight the message field, press
[Options], select Text Options and
press O, and then select Text
Colour or Text Size and press O.
Select the desired colour or size
using the navigation keys and press
O.
2
3
Select New Slide and press O.
Select Insert Before or Insert
After and press O.
2
Insert Before: Inserts a slide before
the current slide.
Insert After: Inserts a slide after the
current slide.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
71
Messaging
Messaging
Adding multiple recipients
Adding attachments
Requesting a Delivery Report or a
Read Report for a Picture message or
Text message you are creating
Assigning a notification sound for
message arrival
You can add up to a maximum of 20
recipients to any one message using
Picture Message and Email.
You can attach files to the message
you are sending using Picture
Message and Email.
You can assign a notification pattern to
be heard when you receive a message
and to distinguish the sender of the
message. See p. 55 and p. 114 for
details.
1
Before sending, from the address
input display, press [Options],
select Settings and press O.
Select Read Report or Delivery
Report and press O
1
After selecting the message type,
highlight the message field and
press O, press [Options], select
Add Field and press O.
1
After selecting the message type,
highlight the message field, press
[Options], select Attachments and
press O.
2
3
Select Yes to activate the function.
Saving the message as a draft
2
Select To, Cc or Bcc and press O.
The corresponding new address
input field appears.
2
3
Select Attach Image, Attach
Sound, Attach Video, or Attach
File and press O.
Select the folder and desired file
you want to attach to the message
and press O.
• Press [Options] from the message
creation display, select Save Draft
and press O. The message is saved
in the Drafts folder.
Read Report: Requests notification
that the recipient has
opened the message.
Delivery Report: Requests notification
that the message has
Note: Only “To” is available for Text
Message.
been delivered.
Note: You can also attach a new file
(Picture, video or voice recording) to
the message by selecting Take
Picture, Voice Recorder, or Video
Recorder in step 2 above.
Tip: You can also define these settings
before starting to create a message.
Go to Message Settings from the
Messaging menu. See p. 77 for
details.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
73
Messaging
Messaging
(A)
2
3
Select a new message and press
O to display it.
2
Select the message to display and
press [View] to open the message.
• Options available from this
display are: Delete, Call
Contact, Lock, Forward, Save
to Contacts.
Opening messages
When finished reading or displaying
the message, press B to return
to the Inbox and check other new
messages or press y to return to
the Standby display.
Opening messages at the time of
reception
When a message arrives, a notification
picture or video appears with the
sound or vibration pattern you set.
(See p. 55 and p. 114 for how to set a
Message notification pattern.)
Sending messages from the Inbox
(B)
Managing the Inbox
Press [Menu] in Standby mode,
highlight and press O, and
Replying to the received message
1
1
2
3
Open the Inbox and select the
message you want to reply to.
Press [Options], select Reply or
Reply All and press O.
Enter the message text and press
[Send].
10:10
12/12/05
1
After reception of the message is
finished, display (A) appears. When
the sender’s phone number is
registered in the Address Book,
their name and phone number will
appear on the display. On pressing
O or after waiting for a while,
display (B) appears. To read or view
received message(s), select
Orange UK
then select Inbox and press O to
open the Inbox.
• Options available from this
display are: Reply, Reply All,
Forward, Delete, Delete All, Get
Email, Call Contact, Lock
(Unlock appears if the message
is already locked), Mark as Read
(Mark as Unread), Sort,
Camera
(Messages) and press O, and then
select Received Messages and
press O. The Inbox appears.
Message Details (Error Details),
Mark Items.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
75
Messaging
Messaging
Forwarding the message to another
person
Managing Sent or Draft messages
Picture Message settings
Message Settings
1
To open sent or draft messages,
press [Menu] in Standby mode,
Sending:
1
2
3
Open the Inbox and select the
message you want to forward.
Press [Options], select Forward
and press O.
In the To: field, enter the phone
number or email address and press
O.
Changing your Message Settings
Validity Period: Sets the duration for
how long messages are
saved on the server. The
default is set to 1 Week.
Delayed Delivery: Delays message
sending time. The default
is set to None Specified.
Reports: Two types of Report settings
are available. To request
notification that a Picture
Message has been
highlight
and press O.
1
Press [Menu], highlight
and
2
3
Select Sent or Drafts and press
O.
Select the message you want to
open and press O.
press O, and then select Message
Settings and press O.
2
Select Text Message, Picture
Message, Email, or Look & Feel
and press O.
4
5
In the Subject field, enter the
message and press O.
Press [Send].
Text Message settings
Message Centre: Selects or edits the
message centre number
for Text Messages.
opened by the recipient,
set Read Report to Yes.
To request notification that
a Text Message or Picture
Message has been
Sending:
Validity Period: Sets the duration for
how long messages are
saved on the server. The
default is set to 1 Week.
Delivery Report: Requests
notification that a Text
Message has been
delivered, set Delivery
Report to Yes.
delivered.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
77
Messaging
Messaging
Receiving:
Acknowledge: Selects how to respond
to a Picture message if
Max Message Size: Sets a limit to the
email size for download-
ing, or downloads
Look & Feel settings
Frequency: Selects whether or not to
defer message reception
according to the message
capacity. Options are
Use this setting to change the look of
message contents. For example, you
can enter or edit a signature
(Personalised text template), or
change the text position in messages
the sender is requesting a
Delivery Report or Read
Report notification upon
receipt of this message.
The options are Always,
Never, and Ask First.
messages without any
restriction on the email
size.
Immediately (default),
Always Defer, or Defer if
over 1 KB (10KB, or
Delete Preference: Selects From
Phone Only if you want
to keep messages on the
server when deleting
messages or From
Font Size: Selects the font size for
the message you are
reading.
Slide Interval: Sets the slide duration
time in Picture Messages.
The default is set to five
second.
Personalisation: Adds or edits a
signature inside mes-
sages. Select Edit
50KB).
Note: Ask First is only selectable from Read
Roaming: Selects whether or not to
defer message reception
when you are roaming
according to the message
capacity. Options are
Report display.
Server if you don't want
to keep messages on the
server.
Email Settings
Polling Interval: Selects the time
frequency for polling for
emails. The default is set
to Never, which means
polling is never done.
Account:
Creates or edits email
account details.
Immediately (default),
Always Defer, or Defer if
over 1 KB (10KB or
For details, see p. 28 in
the “get started with your
Sanyo S750i” guide.
50KB).
Signature to make/edit a
signature. To enable the
signature, set Enable/
Disable Signature to
Always.
Reject Anonymous: Rejects anony-
mous messages.
Polling Size: Selects how many
messages are to be
downloaded when polling.
The default is set to 10
messages.
Download from Www.Somanuals.com. All Manuals Search And Download.
78
79
Media Album
Download from Www.Somanuals.com. All Manuals Search And Download.
80
81
Media Album
Media Album
The Media Album is a data manage-
ment function. It uses folders to
manage various kinds of data stored in
the phone or on the SD Card.
Accessed from the main menu, you
can go to the Media Album to sort,
preview, move, copy, or delete files, or
edit file names. You can also associate
an image with a contact or attach it to
a message from the Media Album.
Creating a new folder
3
Select the function item from
Wallpaper, Ringtones, Address
Book, Calendar, Schedule, Alarm
Clock, Sound Effects, Video Call
Tone, Hold Settings, Alternate
Video, and press O.
Saving data into folders from other
functions
1
2
3
Press [Menu], highlight
press O.
Press [Options], select Create
Folder and press O.
Edit the folder name and press O.
and
You can save data into the Media
Album immediately after taking photos
or shooting videos or when opening
attached files.
Notes: • Additional functions that use
Ringtones are:
Saving a photo you just took
Using files for other functions
1
Press [Options] immediately after
taking a photo, select Save to and
press O.
Incoming Call, Incoming Text
Message, Incoming Picture
Message, Incoming Email,
Incoming Delivery Report,
Incoming Push, or Incoming
Video Call.
• Additional functions that use
Sound Effects are Opening
(Sound made when sliding the
phone open) and Closing (Sound
made when sliding the phone
closed).
You can set a file in the Media Album
to be used as wallpaper, an incoming
call notification, or a message arrival
notification. Note that options menu
vary according to functions used.
Opening stored files
2
Select the Picture folder or another
available folder and press O.
1
2
3
Open the Media Album display.
• Press [Menu] →
Select a folder from the list and
press O.
Select a file you want to open and
press O.
1
From the Media Album display
select and open a folder then open
a file you want to use for another
function.
2
Press [Options], select Settings
and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
83
Media Album
Media Album
Saving the video you just took
Text:
Selects Very Small,
Small, Standard, or
Large as the text size and
allows you to enter text to
paste into the picture.
Editing a video
Editing photos/videos
1
Press [Options] immediately after
shooting a video, select Save to
and press O.
• Open a video in the Video List folder,
press [Options], select Edit Video,
and then select one of the following
items and press O.
You can edit photos or videos stored
in the Media Album.
2
Select the Video List folder or
another available folder and press
O.
Paste Image: Selects up to 20 photos
(Only QQVGA [120 X160]
or smaller sized pictures)
to paste from the Picture
folder, Documents folder
or another folder if you
Editing photos
Re-record Voice: Records sound onto
a video that has no sound
or over-records new
• Open a photo in the Picture folder,
press [Options], select Edit Image,
and then select one of the following
items and press O.
sound onto a pre-
recorded video.
have created one.
Caption:
Inserts a caption onto the
video (Up to 10 captions
available for each video).
Scaling:
Stamp:
Enlarges/Reduces the
display size.
Selects Original or Media
Album to find a desired
marker stamp.
Rotate:
Rotates the photo 90
degrees each time
is pressed.
or
• To create the text, press
Special Effects: Adds an effect to the
picture from Sepia, Black
and White, Tile, Portrait,
Fade-out, Spotlight,
Poster, and Soft Focus.
Mirror Reverse: Mirror-reverses a
photo.
[Options], select New and press
O, and then enter the text.
• To edit the text, select the
desired caption, press [Options],
select Edit, then select Input
Caption, press O and edit the
text.
Frame:
Selects a frame by
pressing [Next] repeatedly
until a desired one is
found.
Image Format: Changes the file format
between JPEG and PNG.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
85
Media Album
Media Album
• To insert the text at the desired
point, select the caption, press
[Options], select Edit, then select
Start/End Time and press O to
start playing the selected video.
Press [Start] to indicate the start
point and press [End] to indicate
the end point.
Chapter:
Adds chapter titles to
video files in the Video List
folder.
Resizing a photo
3
To zoom out after zooming in,
press [Out].
This function allows you downsize a
photo in your Picture folder as long as
it is not a QQVA (120 X 160) picture.
Sending a photo/video attached to
a message or via Infrared
Previewing a video with a chapter
title (For video camera only)
1
2
Open the photo, press [Options],
select Resize and press O.
Select QVGA (240 X 320) or
QQVGA (120 X 160) and press O
to create a smaller size photo.
Press [Enlarge] or [Reduce].
1
Highlight the desired photo or
video, press [Options], select Send
and press O.
Select Attach to Message or
Send via Infrared and press O.
This function enables you to preview a
video with a chapter title.
Capture:
Freeze-frames an image
in the video and stores it
in the Picture folder.
Clips a segment of the
video for moving to
another point.
2
1
2
Open the video you want to
preview, press [Options], select
Play Chapter and press O.
Select a chapter from the Chapter
List and press O.
3
Clip:
Zooming a photo in or out
Cut:
Deletes a segment of the
video.
This function enables you to zoom in
or out on a still photo in the Picture
folder. The function is available only for
photos of VGA size or larger.
Combine Video: Joins the currently
viewed video with another
retrieved from the Video
List folder, Documents
1
2
Open a photo, press [Options],
select Zoom and press O.
Press [In] to zoom in by 5%. Press
[In] repeatedly until the desired
zooming is reached.
folder or another folder if
you have created one.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
87
Media Album
Media Album
Changing the display format of
photos or videos (Change Display
Format)
Moving or copying photos or videos
to a User Folder
Sorting data in the Picture folder or
Video List folder
Creating stamps and frames using
data in the Picture folder
1
Highlight a photo or video in the
list, press [Options], select Move to
Other Folder or Copy to Other
Folder and press O.
1
Open the Picture folder or Video
List folder, highlight the desired file
and press [Options], then select
Sort and press O.
1
Open a QQVGA (120 X 160), or
QVGA (240 X 320) picture, press
[Options], select Create and press
O.
This function enables you to change
display formats. A 9-thumbnail-image
display of the Picture folder or Video
List folder is initially shown. If you
change the screen setting to 25 Image
View, a 25-thumbnail-image display is
shown. If you want to see a list of data
file names, select List View.
• From the Move to Other Folder,
you can select Move, Move
Multiple, or Move All in Folder.
From the Copy to Other Folder,
you can select Copy, Copy
Multiple, or Copy All in Folder.
If you have selected moving or
copying multiple items above,
select by pressing O and then [OK]
to finish.
2
3
Select Sort by Name, Sort by
Category, Sort by Size or Sort by
Date and press O.
Select Ascend or Descend and
press O.
2
Select Stamp or Frame and press
O.
3
4
Select one and press O.
Press [Save] when you finish editing,
enter a file name and press O.
Note: The items in More Pictures, More
Videos or More Melody & Ringtones
cannot be sorted.
1
Highlight the desired photo or
video, press [Options], select
Change Display Format and press
O.
2
3
2
Select 25 Image View, 9 Image
View, or List View and press O.
Select the destination folder and
press O.
Notes: • 25 Image View, 9 Image View, or
List View is available for the
Picture folder.
• 9 Image View or List View is
available for the Video List folder.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
89
Using the SD
Memory Card
Download from Www.Somanuals.com. All Manuals Search And Download.
90
91
Using the SD Memory Card
Using the SD Memory Card
• The SD Card has a lock to prevent
the overwriting of stored data.
A Secure Digital Memory card (SD
Card) is a compact and portable
Inserting the SD Card
3
4
Push the card slightly in and then
release. The card will then spring
out from the card slot.
Pull out the card and close the card
cover.
1
2
3
Make sure that the phone is turned
OFF.
memory storage device. The S750i
enables you to use an SD Card to
store photos, video images, sounds,
contacts, and downloaded data that
have no restrictions. This is convenient
for transferring to a personal computer
as well as printing images directly from
the SD Card using the DPOF printing
function. You can also access the SD
Card content by pressing the left soft
key when using the Media Album.
To lock the card, move
the tab to the position
shown in the diagram.
Open the cover of the SD Card slot
as shown in the diagram.
With the label side facing towards
the front, insert the SD Card slowly
into the card slot.
Formatting the SD Card
4
Push the card in until a click is
heard.
Before using a new SD Card which
has not yet been formatted or a card
which has been used in a PC or other
device, use this function to format the
card. Note that all the data stored on
the card is deleted when you format it.
• Recommended SD Card capacity to
be used: up to 512 MB
5
6
7
Close the card cover.
Turn the phone on.
Check if the icon
has appeared
Inserting or removing an SD
Card
on the display to indicate that a
card is inserted. If not, try inserting
the card again from the beginning.
Caution: It is strongly recommended that
you keep a backup copy of the
data stored on the card as an
unexpected occurrence may
1
2
3
Press [Menu], highlight
and
press O, then select Memory
Settings and press O.
Select Memory Card and press O,
then select Format Memory Card
and press O.
result in the data being lost.
Removing the SD Card
Notes: • An SD Card which has been
formatted by another device such as
a personal computer may not
1
Make sure that the phone is turned
OFF.
2
Open the cover of the SD Card
slot.
operate correctly with the S750i. Try
re-formatting from the handset. (See
p. 93 “Formatting the SD Card”)
Enter your security code and select
[Yes] at the confirmation display.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
93
Using the SD Memory Card
Using the SD Memory Card
Caution: Do not try to remove the SD Card
Icons related to data on the SD
Card
Save to Memory Card: Saves the
selected type of data in
the memory of the phone
onto the SD Card as
Using the SD Card
while formatting.
An SD Card is inserted.
A write-protected SD Card is
inserted.
Transfer (backup) functions
Example: Accessing the Media Album.
You can transfer (backup) data to or
backup data. Enter your
Media Album
Digital Camera Folder
Picture
from the phone and the SD Card. Take
care while performing a backup as in
either case data in the saving location
is overwritten.
security code to proceed.
Read from Memory Card: Saves the
selected type of data on
the SD Card in the phone
as backup data. Enter
Note: If an unsupported SD Card is inserted
into the phone, the icons shown
above will not appear.
Video List
Melody & Ringtones
Documents
1
2
Press [Menu], highlight
press O,
and
your security code, and
then select [Yes] at the
confirmation display.
Select Memory Settings, Memory
Card, then Backup and press O.
• A data selection window
appears. Select backup data
from All, Picture, Video List,
Melody & Ringtones, and other
similar items.
Select the type of data for backup
and press O. Enter your security
code if prompted and press O.
Select Save to Memory Card or
Read from Memory Card and
press O.
“SD Card”
“Handset”
Media Album
Picture
Video List
Melody & Ringtones
Java™ Games
Bookmarks
Saved Page
3
4
Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
94
95
Using the SD Memory Card
Using the SD Memory Card
Note: If you select All in step 2 to save all
data as backup, and if saving data
onto the SD Card you will be asked if
you want to include images which are
inserted into the Address Book or
not. If saving backup data to the
phone however, the data category
display changes as you select data to
be included in the backup:
Moving or copying data from the SD
Card to the phone
Moving or copying data among
folders on the SD Card
DPOF Printing
Digital Print Order Format (DPOF) is a
convenient print selection format which
1
Access the SD Card from the
Media Album display by pressing
[SD Card].
• To move the data from one location
to another within the SD Card,
access the SD card and select Copy
to Other Folder or Move to Other
Folder from the option menu items
and follow step 3 above.
makes ordering prints at a print shop
easy. Before you go to the print shop or
use the DPOF compatible printer, you
can specify which photos and how many
of them you want to print from the
2
After highlighting the desired file,
press [Options] and select Move to
Handset or Copy to Handset from
the option menu items.
Address Book Backup → Schedule
Backup → To Do Backup → Note
Backup
photos you have stored on the card.
3
To move, select either Move, Move
Multiple, or Move All in Folder
and press O. To copy, select either
Copy, Copy Multiple, or Copy All
in Folder and press O.
Checking the memory usage of the
SD Card
Note: You can only specify VGA or SXGA
pictures that are stored in the Digital
Camera folder on the SD Card. To
specify photos taken with your S750i,
you must first set the phones storage
device to the SD Card before taking
the picture.
• Select Mem. Card Usage Status
from the Memory Card display and
press O.
4
5
To select multiple files, use the
navigation keys and press O to
select each item, then [OK] to
finish.
Select the folder destination and
press O.
Note: To go to the Memory Card display:
Press [Menu] →
→ Memory
• Start the camera → [Options] →
Camera Settings → Storage
Device → Memory Card
Settings → Memory Card
Editing the name of the SD Card
1
Select Rename Memory Card
from the Memory Card display and
press O.
2
Edit the name and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
97
Using the SD Memory Card
Using the SD Memory Card
Specifying photos for DPOF Print
Before proceeding with specifying the
Specifying the number of DPOF
Index Print copies
Printing out DPOF photos (Print
Mode)
number of Standard prints or Index
prints, make sure you have created a
DPOF print order.
1
In Standby mode, press [Menu],
select highlight and press O.
1
In Standby mode, press [Menu],
select highlight and press O.
Note: Do not disconnect the USB cable
2
Select Memory Settings and press
O, select Memory Card and press
O, then select DPOF Print and
press O.
when using this function.
2
Select Memory Settings and press
O, select Memory Card and press
O, then select DPOF Print and
press O.
Specifying the number of DPOF
Standard Print copies
1
2
In Standby mode, press [Menu],
select highlight and press O.
3
4
Select either Standard Print, or
Index Print and press O.
Press [Options], select Set as Print
and press O.
1
In Standby mode, press [Menu],
select highlight and press O.
Select Connectivity and press O,
select Print Mode and press O,
then select Execute and press O.
Once the “Please connect to
Printer” message is displayed
connect the USB cable to the
phone and printer.
3
4
Select Index Print and press O.
Press [Options], select Set Copies
and press O.
2
Select Memory Settings and press
O, select Memory Card and press
O, then select DPOF Print and
press O.
3
5
6
Select a folder and press O.
Select desired images and press O
after selecting each.
5
Specify the number of copies using
the navigation keys and press O.
3
4
5
Select Standard Print and press
O.
Press [Options], select Set Copies
for All, press O and press [Yes].
Specify the number of copies using
the navigation keys and press O.
7
8
Press [OK], then press [Save].
Use the Print Mode function (See
below ”Printing out DPOF photos
(Print Mode)”) to print out or eject
the Memory Card and take it to a
print shop.
4
5
Select DPOF Print and press O.
Press [Yes] to print.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
99
Using the SD Memory Card
Cancelling all prints requested
1
Press [Menu], highlight
and
press O, and then select Memory
Settings and press O.
2
3
Select Memory Card and press O.
Select DPOF Print and press O,
and then select Cancel Print
Order and press O. Select [Yes] at
the confirmation display.
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
100
101
Settings
Settings
Phone Settings
Memory Settings
Opening the Settings Menu
Settings menu details
Sets the clock, ringtones, sound
effects for various situations, and other
similar items.
Checks memory status of the SD Card
or phone and allows you to reset and
clear all handset memory as well as
format the SD Card.
To open the Settings menu, press
[Menu] in Standby mode, highlight
and press O.
Profiles (p. 108)
Normal:
Silent:
Sets the normal profile.
Sets vibration ON and sets
all incoming tones OFF.
Sets ringers and vibration
OFF.
Browser Settings
Profiles
Call Settings
Car:
Sets various web related browser
settings such as scrolling and security,
etc.
Changes the ringtone volume and
other reception conditions.
Selects Call settings such as call
diverting, rejecting calls, Auto Answer,
call waiting, Call Barring or Answer
Phone feature.
Meeting: Sets all incoming tones to
the lowest volume.
Loud:
Sets the volume of all tones
to the highest volume.
Display
Connectivity
Changes the display settings such as
character input mode or light, or
Standby display.
Selects how Bluetooth and Infrared
functions are used.
Outdoor: Sets the volume of the
caller’s voice to the highest
volume.
Custom: Customises tone volumes
for various situations.
Video Call Settings
Selects settings for video calling.
Security
Selects settings for locking the phone
and changing the security code or PIN
of the phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
103
Settings
Settings
Display (pp. 109-112)
Phone Settings (pp. 112-121)
Sound Effects: Customises effect
tones for various situations.
Vibrate on Connection: Vibrates to
confirm the line connection.
Video Call Tone: Sets a melody to
sound until the caller
Security: Selects various security
settings for browsing.
Certificate: Selects the current
certificate or root certifi-
cate.
Advanced: Selects if you want to show
the title of the page while
browsing or selects to
convert service messages
that load automatically into
requests for service
Wallpaper: Sets the wallpaper for the
Standby display.
Character Input: Changes the input
mode and character size,
and enables editing of pre-
defined text or smileys.
Power Saving: Sets the idle time for
the power saving display.
Set Time & Date: Sets the clock.
Ringtones: Sets ringtones to incoming
calls or messages.
Melody Volume: Sets the melody
volume.
answers.
Line 2:
Switch between two phone
lines if you have this extra
service. (See p. 115)
Auto Power ON/OFF: Turns the phone
on or off at the time you
set.
Slide Activation: Answers or ends a
call by sliding the phone
open or closed.
Light:
Sets the light durations for
the display backlight and
the keypad backlight.
Flight Mode Setting: Cuts off the line
with the phone switched
on.
Language: Sets the display language
and the answering
messages, or ignore any
WAP based service
inquiries.
Standby Display: Sets wallpaper, time,
and display greeting.
Browser Settings (pp. 121-123)
LED:
Customises the LED colour
pattern for missed calls,
unread messages and
alarms.
language.
Connectivity (pp. 167-186)
Accessibility: Makes the display more
visible and the phone more
audible.
Select Network: Selects the network
area.
WAP Profiles: Displays a list of the
stored WAP profiles to
select and edit them.
Downloads: Disables images, sounds,
or other files that are
Infrared: Sends or receives files via
Infrared.
Bluetooth: Sends or receives files via
Bluetooth.
Synchronise: Synchronises files with
another device or a
loaded automatically when
you download a web page.
Look & Feel: Selects the character
size, text wrap, scroll step
and internet connection
time out.
network server.
Download from Www.Somanuals.com. All Manuals Search And Download.
104
105
Settings
Settings
Print Mode: Prints out still images via
USB.
USB Storage Mode: Transmits SD
Card data to a personal
computer.
Memory Settings (pp. 127-128)
Call Quality Alarm: Sets an alarm to
warn of weak signal
Video Call Settings (pp. 134-136)
Check Memory: Displays how much
space remains for data on
the phone.
Memory Card: Backs up data in the
Address Book, Schedule,
or To Do List and formats
the SD Card, etc.
Handset: Resets the memory
settings and clears memory
in the phone.
Reconnection Method: Sets the
method to switch a video
call to a voice call.
Image Settings: Sets if your image is
to be sent and its image
quality.
Voice Setting: Sets if your voice is
sent.
Auto Answer: Sets whether to receive
video calls automatically or
not.
strength.
Reduce Noise: Reduces ambient noise
to make the other party's
voice clearer.
Call Barring: Blocks outgoing and
incoming calls.
Call Waiting: Answers a call from a
third party while holding the
current call.
Play Answer Phone: Uses the phone
answering service.
Security (pp. 124-127)
Restriction Settings: Selects the option
to bar calls.
Privacy Mode: Sets the Privacy mode
ON/OFF to protect privacy
in contacts.
Change Code: Changes your security
code.
Set PIN: Allows you to set or change a
PIN (Personal Identification
Number).
Camera Settings: Sets zoom in or out
and the rear or front
Call Settings (pp. 128-133)
Fixed Dialling Number: Specifies the
available numbers for
Call Divert: Specifies the phone
numbers for forwarding.
camera.
dialling.
Backlight: Selects the backlight
brightness, minimum, or
normal.
Service Dialling Numbers: Selects
provided services that are
encoded on the SIM/USIM
card.
Hands-free Setting: Activates the
Hands-free function.
Reject Calls: Specifies the numbers to
be automatically rejected.
Hold Settings: Selects a picture or
video to display while you
have someone on hold.
Voice Call Auto Answer: Sets whether
to receive voice calls
automatically or not.
Download from Www.Somanuals.com. All Manuals Search And Download.
106
107
Settings
Settings
Car
:
Ringers and vibration are
OFF. Received calls will
appear in the missed calls
list when set to ON.
Changing input modes and
character size
Profiles
Display settings
This phone has seven types of
Profiles, and Normal is set as the
factory default setting.
1
Open the Character Input display.
Setting the wallpaper
• Press [Menu] →
→ Display →
Photos or videos that have been taken
or downloaded pictures saved in the
Media Album as well as preset
Meeting : All incoming call or
message tones are set to
the quietest. Beep sounds
are generated when an
incoming voice call or video
call arrives.
Character Input
2
3
Select from one of the items below
and press O.
Make the desired changes and
press O.
Activating or deactivating Profiles
pictures can be set as wallpaper.
• Press and hold B.
1
Open the Wallpaper display.
• Press [Menu] →
Wallpaper
→ Display →
Loud
: All tone volumes are set to
the loudest.
: Caller’s voice volume is
set to the loudest.
Selecting the Profile type
Input Method: Selects input mode
from Standard Text Input
(multi-press input) or T9
Text Input
Edit Pre-defined Text: Enables the
editing of text in 6
1
Open the Profile display.
The current wallpaper information is
displayed. Press O to proceed.
Select Original or Media Album
and press O.
Select the desired image and press
O.
Outdoor
• Press [Menu] →
→ Profiles
2
Select the profile to use and press
the O key.
2
3
Custom : Ringtone Volume, key
tone volume, sound effects
volume and melody volume
can be customised. Press
[Detail], then [Edit] and
select settings for each
option.
categories, Internet,
Greeting, Message,
Response, Business, and
Free (a blank page to use
as desired).
Normal:
Silent
Set to regular ringing
pattern.
: Vibration is ON, and all
incoming call or message
tones are OFF.
Note: See p. 81 for details about the Media
Album.
Edit Smileys: Enables the editing of
various emoticons.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
109
Settings
Settings
Notes: • When setting Key Light to ON, if
you also set Auto Key Light to
ON, the phone will automatically
determine if the keypad light
should be turned on or off
according to the brightness of the
surroundings to save battery
power.
Character Size: Selects the size from
Very Small, Small,
Setting the display backlight and
the keypad backlight
Wallpaper: Displays wallpaper on the
Standby display if ON is
selected. Changes to a
default background if OFF
is selected. For how to
Standard, or Large.
You can set the backlight for the
display and the keypad separately.
Setting the power saving mode
select the wallpaper, see p.
109.
1
2
Open the Light display.
• Press [Menu] →
→ Light
The S750i is set to turn off the display
illumination after a set idle time. The
default time is set to 30 seconds. The
display illumination is restored if you
press any key.
→ Display
• The display backlight settings
during a video call are defined
separately from these settings.
See p. 136.
Time & Date: Displays the time and
date in the 24-hour time
system on the Standby
display if ON is selected.
Display Greeting: Enables editing of
the greeting text displayed
when turning the phone on
if you are using a SIM/
Select from the following options
and press O.
Backlight: Sets the light duration
from 5 to 99 seconds.
Selects the brightness
from Minimum or Normal.
Key Light: Sets the light duration
from 5 to 99 seconds if
ON is selected. Turns the
keypad light off all the
time if OFF is selected.
See below for Auto Key
Light.
Customising the Standby display
1
Open the Power Saving display.
• Press [Menu] →
→ Display →
You can customise various settings for
the Standby display: Wallpaper ON/
OFF, Time & Date ON/OFF, and
Greeting words ON/OFF.
Power Saving
2
3
Select Show Screensaver or No
Screensaver and press O.
Enter an idle time (30 to 300
seconds) and press O.
USIM card other than the
one supplied by Orange.
1
2
Open the Standby Display.
• Press [Menu] →
→ Display
→ Standby Display
Select from the following options
and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
110
111
Settings
Settings
Changing LED illumination notifica-
tion patterns
Daylight Saving: Displays the clock in
Day Light Saving time.
5
Select the city corresponding to the
time you want to display on your
screen, and then press [Set] or the
O key.
Phone Settings
This function is used to select different
LED colour patterns to notify you of
missed calls, unread messages, or
alarm time occurrence (Schedule
alarm).
Setting the clock
Setting home area and time difference
It is recommended that you set the
clock before starting to use the phone
so that all time-related information is
displayed correctly. You will need to
set the clock to use the camera
functions etc.
This is an optional function for those
who travel between countries or those
who want to show the time in other
cities without having to adjust the
clock. You should set the Home Area
of your phone’s clock first, and then
set the desired city to display the local
time in the top right corner of your
standby display. Your home area and
the other area can be selected from 36
cities around the world.
Adjusting the clock to Daylight Saving
Time
If you set Daylight Saving to ON, your
phone will show Daylight Saving Time
without having to adjust the clock. If
you set this to OFF, the time shown on
the screen returns to the normal time.
1
2
Open the LED display.
• Press [Menu] →
LED
Select ON and press O, and then
select from either Missed Calls
(Voice Call, Video Call), Messages
(Text Message, Picture Message,
and Email) or Alarm (Schedule
alarm) and press O.
→ Display →
1
2
Open the Set Time & Date display.
• Press [Menu] → → Phone
Settings → Set Time & Date
Select from the following options
and press O.
1
2
Select Daylight Saving and press
the O key.
Select ON and press the O key.
1
2
3
4
Select Home Area and press the
O key.
Select the city for your home area
and press [Set] or the O key.
Select Time Difference and press
the O key.
Time & Date: Edit the current day/time
and year.
Home Area: Selects a city for your
home area.
Time Difference: Selects a city for the
time you want to display on
the screen.
3
4
Select a colour or OFF and press
O.
Press [Save] to finish the setting.
Select ON and press the O key.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
113
Settings
Settings
Note: While setting the ringtone for an
incoming message, the ringing time
can also be set by selecting the icon
in step 3 above. The choices are
Ring and Set Time. If Ring is
Setting ringtones for incoming calls
or messages
(Volume): Adjusts the ringtone
volume for an incoming call.
Using the alternative line service
(Line2)
You can set ringtones for notification
of incoming voice calls or video calls,
incoming messages or other notices
such as incoming Delivery Report or
incoming PUSH.
This function enables you to use
switch to another phone line to answer
and make calls.
(Image): Selects an image to be
displayed on the screen when there is
a call either from the preset (Original)
patterns or by searching through the
Media Album.
selected, the entire piece of music
plays; if Set Time is selected, you can
specify how long to play the music
when a message is received.
1
Open the Line2 display.
• Press [Menu] →
→ Phone
Settings → Line 2
Select Switch Line and press the
O key.
Select either Line 1 or Line 2 and
press the O key.
1
2
3
Open the Ringtones display.
(Vibration): Selects a vibration
pattern and its strength when there is
a call.
Setting the melody volume
2
3
• Press [Menu] →
→ Phone
Settings → Ringtones
Select the notification for which you
want to set the ringtone and press
O.
Set each item below and press O.
• Press [Play] to check the current
pattern.
You can set the melody volume to one
of five levels for the following situa-
tions.
(LED): Selects an LED pattern and
colour to be indicated on the top front
edge of the phone when there is a call.
Tips:• To lock the setting, select Lock
Line, press O and enter PIN2 (See
p. 126).
• When playing sound data saved in
the Media Album.
• When playing sound data attached
to Picture Messages or Emails.
• When playing downloaded data.
• To edit the names of the lines, select
Edit Line Name and press the O
key.
Tip: If you press [Options] in step 1 on the
Ringtones display, you can select All
Incomings to set a ringtone for all
incoming calls and messages or All
Messages to set a ringtone for all
incoming messages (excluding
incoming calls).
(Melody): Selects a sound or
melody pattern to be heard when
there is a call either from the preset
(Original) patterns or by searching
through the Media Album.
1
Open the Melody Volume display.
• Press [Menu] → → Phone
Note: For further information, contact your
Orange stockist. This function is
available only when the inserted
USIM is designed for it.
Settings → Melody Volume
Adjust the melody volume using u /
d and press O.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
114
115
Settings
Settings
Setting the phone to offline (Flight
Mode)
Setting the display language, date
format or decimal format
Setting heightened audibility and
better readability (Accessibility)
network. Making a list of network
operators and editing that list is also
possible. While editing you can also
prioritise the access order among
these operators.
Flight Mode disables call, message,
WAP and other network related
1
Open the Language display.
This function sets the character size to
the largest for situations such as when
you enter phone numbers, read
messages, search in Contacts, or
browse web pages. Also, the speaker
volume is set to the highest level so
you can hear the other party’s voice
better.
• Press [Menu] →
→ Phone
Settings → Language
functions although it is switched on.
This function is useful for when you
want to play a Java™ application on
an aircraft, where the phone should
not generate a radio signal. When the
2
To change the language, select
Display Language and press O.
To change the date format, select
Date Format and press O. To
change the decimal format, select
Decimal Format and press O.
Select the desired item and press
O.
Opening the Select Network display
• Press [Menu] →
→ Phone
Settings → Select Network
mode is activated,
display.
appears on the
Setting the network area
1
Select Select Network on the
Select Network display and press
O.
3
1
2
Open the Accessibility display.
• Press [Menu] → → Phone
Settings → Accessibility
1
Open the Flight Mode Setting
display.
Display Language: Selects from
English, Deutsch,
2
Select UMTS/GSM Dual, GSM
Only, or PCS Only and press O.
• If you select UMTS/GSM Dual, the
phone always goes to the UMTS
network first.
Press [OK] or O.
• Press [Menu] →
→ Phone
Settings → Flight Mode Setting
Select ON and press O.
• To release the setting, select OFF
at this point.
Français, and Italiano.
2
Selecting network area (Select
Network)
Date Format: Selects from DD/MM/
YYYY, DD.MM.YYYY or
YYYY-MM-DD.
This function enables you to select the
mobile phone network area. The S750i
can roam dual network areas. So you
can use the phone in the UMTS
Decimal Format: Selects from “.” or “,”
network area and/or the GSM
Download from Www.Somanuals.com. All Manuals Search And Download.
116
117
Settings
Settings
3
Select Auto or Manual and press
O.
WAP Profiles
Setting the sound effects
Warning: Selects the warning sound
pattern and the volume on
performing a wrong
Selecting the type of WAP profile
You can customize an effect tone for
each setting described below.
• If you select Manual, you will
always be required to select a
network service operator from the
list. If you select Auto, selection of
network service operators depends
on the setting in the Edit Preferred
List (See below).
1
Open the WAP Profiles display.
• Press [Menu] → → Phone
operation.
Opening: Selects the sound pattern
and the volume on sliding
open the phone.
Closing: Selects the sound pattern
and the volume on sliding
the phone closed.
1
2
Open the Sound Effects display.
• Press [Menu] → → Phone
Settings → WAP Profiles
Select the profile type and press
O.
2
Settings → Sound Effects
Choose a selectable event from the
list to use as the effect tone and
press O. Use u / d to adjust the
volume and press O to set. Press
[Tone] to select other available tone
patterns.
Editing the profile
1
Select a profile you want to edit,
press [Options], then select Edit
Profile and press O.
Putting priority on the order of network
operator access
Tip: To set the tone volumes for all the
situations above at one time, press
[Set All] in step 1 above.
1
Select Edit Preferred List from the
Select Network display and press
O. A list of network operators
appears.
Select an operator, press [Options],
edit the list using the options Add,
Insert, Change Order or Delete
and press O.
2
3
Select Browser Settings or MMS
Settings and press O.
Enter the necessary item(s).
Key Tone: Selects the confirmation
sound pattern and the
volume on pressing keys.
Completion: Selects the confirmation
sound pattern and the
2
Deleting the profile
1
Select the WAP profile you want to
delete and press [Options].
volume on completing
setting or registration.
2
Select Delete and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
118
119
Settings
Settings
Setting vibration to confirm the
connection
1
2
Open the Video Call Tone display.
• Press [Menu] → → Phone
Setting Auto Power ON/OFF
Answering or ending a call with a
sliding motion (Slide Activation)
You can set your phone to be turned
on or off automatically at a set time.
Settings → Video Call Tone
Select ON and press O to activate
the function. Two menu items
appear with icons. Press [Set] after
you finish completing the settings
below.
This function enables the phone to
vibrate when the other party’s phone
has detected your call. It is set to OFF
by default.
This function enables you to answer a
call by sliding the phone open or end a
call by sliding the phone closed.
Caution: Please make sure that Auto Power
ON is deactivated before boarding
an aircraft.
1
Open the Slide Activation display.
• Press [Menu] → → Phone
1
Open the Vibrate on Connection
display.
1
Open the Auto Power ON/OFF
display.
Settings → Slide Activation
Select Open to Talk or Close to
End and press O.
Select ON and press O.
• To release the setting, select OFF
at this point.
(Melody): Selects a sound or
melody pattern for a Video
Call Tone either from the
preset (Original) patterns or
by searching through the
Media Album.
2
3
• Press [Menu] →
→ Phone
• Press [Menu] →
→ Phone
Settings → Vibrate on Connec-
tion
Settings → Auto Power ON/OFF
Select Auto Power ON or Auto
Power OFF and press O.
Select ON and press O, and then
enter the time to turn on or off.
Press [Set] or O after you finish the
setting.
2
3
4
2
Select ON and press O.
Setting the melody played until your
video call is connected
(Volume): Adjusts the volume for
the Video Call Tone.
Browser settings
This function enables you to listen to a
melody instead of a ringing tone until
the other party answers your video
call.
1
Open the Browser Settings display.
• Press [Menu] →
→ Browser
Settings
2
Select from the following items and
press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
120
121
Settings
Settings
Downloads: Disables images, sounds,
or other files that are automati-
cally loaded when you
• Character Size: Select the character
size from Very Small, Small,
Standard, or Large.
• Secure Prompt: Select ON or OFF if
you want or don’t want the
phone to notify you with a
prompt when the connection
turns from a protected one to
an unprotected one.
• Authentication: Select ON or OFF to
save or not save authentica-
tion to cache (temporary
memory storage used by the
phone).
• Send Referrer: Select ON or OFF if
you want or don’t want to
send HTTP Referrer header
information when using the
browser.
Certificate: Select to display the
current certificate or root
certificates.
Advanced: Select to display page titles
while browsing. Select to
accept or reject WAP based
service inquiries.
• View Title Region: Select ON or OFF
to display or not display the
title of page while browsing.
• Service Load: Select Convert to
convert service messages that
load automatically into
download a web page. Select
from the following to switch
disable ON or OFF.
• Text Wrap: Select to wrap words at
the end of a line. Select Word
Boundaries to automatically
wrap words to the next line at
the end of a line boundary, or
select Character Boundaries
to not wrap words at the end
of a line boundary.
• Scroll Step: Selects the scrolling unit
from Single Line, Half Page,
or Whole Page.
• Connection Timeout: Selects the
time to wait for the internet
connection from 60 Seconds,
90 Seconds or No Wait
• Disable Images: Select ON to block
images from automatically
downloading to make viewing
faster.
• Disable Sounds: Select ON to block
sounds from automatically
downloading to make viewing
pages faster.
• Disable Objects: Select ON to block
objects from automatically
downloading to make viewing
pages faster.
Look&Feel: Sets the character size,
text wrap boundaries, scrolling
attribute and connection
timeout.
requests for service mes-
sages, or select Ignore to
ignore any WAP based service
inquiries.
Time.
Security: Sets the following various
security settings for browsing.
• Current Certificate: Select to display
the current certificate.
• Root Certificates: Select to display a
list of root certificates.
Download from Www.Somanuals.com. All Manuals Search And Download.
122
123
Settings
Settings
Dial Lock: Locks all the keys and
restricts use of the phone
except for receiving calls,
making emergency calls and
diverting calls.
Lock Address Book: Locks use of the
Address Book or other related
functions.
Restrict Dial: Restricts use of call
histories or direct number
input to make outgoing calls.
Use of the Address Book is
available.
Auto Dial Lock: Sets Dial Lock
automatically every time you
turn the power on.
Setting Privacy Mode
Making a contact a private data item
Connectivity
1
Open the contacts list and open
the contact you want to keep
private.
You can assign “Private” status to a
contact in the Address Book or
Schedule or ToDo and make the entry
private, preventing others from seeing
the information. First, you have to set
Privacy mode ON. Then you must
make the entry in the Address Book
(or Schedule) a private entry. Finally, if
you set Privacy mode OFF, the private
entries will not be shown on the
display.
See p. 167 for details on connectivity.
2
3
4
Press [Edit], then l / r to scroll to
the “Other” display
Select the private setting icon
and press O.
Select ON and press O, then press
[Save].
Security settings
Locking the phone
The S750i provides several locking
modes which are described below.
When the restriction is set, you will
have to enter your security code to
proceed. This is so you can prevent
others from using your phone.
Setting Privacy mode ON
1
Open the Privacy mode display.
Note: As for Call Barring on the network
• Press [Menu] →
Privacy Mode
→ Security →
service, see p. 130.
2
Select ON and press O.
• When this setting is ON, private
contacts become accessible. When
this setting is OFF, private contacts
are not displayed on the screen.
Enter your security code.
1
Open the Restriction Settings
display.
• Press [Menu] →
→ Security →
Restriction Settings
Select a restriction option and
press O.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
124
125
Settings
Settings
Note: Some SIM/USIM cards may not
Setting your own security code
Setting your own PIN Code
6
Enter your new PIN code again to
support this function. For these types
you will be asked to enter the PIN
every time you turn the phone on.
Make sure you enter the correct PIN
as you will have to enter the PUK if
you repeatedly enter the wrong PIN.
confirm and press O.
The phone’s security code is essential
to protect your phone from
This function enables you to change
the preset PIN. SIM/USIM cards that
are sold with a preset PIN. You can
use the card with the preset PIN.
However, it is recommended that you
change it to a PIN you have chosen
yourself to protect the card from
unauthorized use. There are two types
of PIN codes, the PIN1 Code and the
PIN2 Code. The PIN1 Code is used for
locking use of the SIM/USIM card
while the PIN2 code is used for
Switch PIN1 ON/OFF
unauthorised use or to avoid acciden-
tal operation. At the time of purchase
the security code is set to “9999”. We
strongly advise you to change the
initial security code to one of your own
choosing to keep your private data
secure in case the phone is lost or
stolen. Keep your new security code
private and if you make a note of it,
store that in a safe place separate
from your phone.
If this is set to ON, you will be asked to
enter the PIN every time you turn the
phone on. Conversely, if it is set to
OFF, PIN entry will not be requested
any time you turn the phone on.
Re-initialising your phone
Resetting all data or phone
functions
1
Open the Set PIN display.
• Press [Menu] →
Set PIN
Select Switch PIN1 ON/OFF and
press O.
Select ON or OFF and press O.
• You must enter your PIN to change
the setting. Enter the PIN and press
O to finish.
→ Security →
Caution: Be sure to make a copy of any
important data before performing
a reset operation.
restricting some network services.
2
3
1
Open the Change Code display.
1
Open the Set PIN display.
1
2
Open the Handset display.
• Press [Menu] →
→ Security →
• Press [Menu] →
→ Security →
• Press [Menu] →
→ Memory
Change Code
Set PIN
Settings → Handset
Select the desired resetting method
and press O.
2
3
Select Yes and press O.
Enter your security code (initially
9999).
2
3
4
Select Change PIN and press O.
Select PIN1 or PIN2 and press O.
Enter the current PIN code and
press O.
4
Enter a new 4-digit security code
and press O. Your security code is
changed.
5
Enter your new PIN code and press
O.
Download from Www.Somanuals.com. All Manuals Search And Download.
126
127
Settings
Settings
Reset Settings: Resets the settings of
the phone to the initial
1
Open the Call Divert display.
• Press [Menu] → → Call
Settings → Call Divert
Select Voice or Video Call and
press O.
Select All Incomings, In Call,
When No Answer, or When Out of
Network, and then select ON and
press O.
Enter the destination number and
press O.
Specified Number: Rejects calls from
the numbers registered in
the list. You can add or edit
numbers to be rejected by
pressing [List].
Anonymous: Rejects calls from the
numbers intentionally set
as No Caller ID number by
the caller.
Payphone: Rejects calls from a pay
phone.
Unidentified: Rejects caller-unidentified
calls.
1
2
Open the Hold Settings display
• Press [Menu] → → Call
Settings → Hold Settings
Select Original or Media Album,
press O, and select the desired
video file.
settings at the time of
purchase.
2
3
Clear All Memory: Clears all the
memory contents such as
Contacts or call histories.
Reset & Clear: Resets all the function
settings and clears all the
memory contents.
Setting the Auto Answer (Voice Call
Auto Answer)
4
This function (available only with the
use of a headset) enables you to
receive calls automatically without
touching any keys after a preset
ringing time. For setting the Auto
Answer for the video call function, refer
to “Auto Answer” under the Video Call
settings section. (See p. 135.)
3
Enter your security code and press
[Yes].
Setting Reject Calls
Note: Data on a SIM card or SD Card is not
Non-registered No.: Rejects calls
whose numbers are not
stored in Contacts.
You can reject calls according to the
settings described below.
reset by this function.
1
Open the Reject Calls display.
• Press [Menu] → → Call
Call settings
Setting the Hold settings (for video
call only)
1
Open the Voice Call Auto Answer
display.
Settings → Reject Calls
Select ON and press O.
Enter your security code.
Select a rejecting method and
press O.
Call diverting service
2
3
4
This function enables you to select a
picture or video to display while you
have someone on hold.
Subscribing to this service enables
you to divert incoming calls to the
numbers you have specified. Setting
numbers for both voice and video calls
is available.
• Press [Menu] →
→ Call
Settings → Voice Call Auto
Answer
Download from Www.Somanuals.com. All Manuals Search And Download.
128
129
Settings
Settings
2
3
Select ON and press O.
• To release the setting, select
OFF.
Enter the answering time (1 to 29
seconds) and press O.
Setting restrictions on calls (Call
Barring)
Block Outgoing Calls: All Outgoing
Calls, Int’l except to
Home, or International
Calls
Block Incoming Calls: All Incoming
Calls or When Roaming
Call Waiting
This supplementary service notifies
you of an incoming call from a third
party while talking with a second party
and enables you to answer the third
party by putting the second party on
hold.
Call Barring enables blocking of
outgoing and/or incoming calls. The
Call Barring password is initially set to
1111. You can make an emergency
call even if Call Barring is set to ON.
Subscribing to the service centre is
required for the service.
Setting Call Quality Alarm ON
Notes: • If you want to confirm the current
settings of both call barring
services, select Check Setting in
step 2 above.
If this function is activated, a beep
sounds when the signal strength falls
below the level suitable for communi-
cation during a call.
1
Open the Call Waiting display.
• Press [Menu] → → Call
• If you want to set a new password
for roaming another service
network, select Set Password in
step 2 above.
1
Open the Call Barring display.
• Press [Menu] → → Call
Settings → Call Waiting
Select Voice or Video Call and
press O.
Select ON and press O.
• To release the setting, select
OFF.
2
3
Settings → Call Barring
1
2
Open the Call Quality Alarm display.
• Press [Menu] → → Call
Settings → Call Quality Alarm
Select ON and press O.
• To release the setting, select
OFF.
2
Select Block Outgoing Calls or
Block Incoming Calls and press
O, and then select whether to
block the following types of calls.
Download from Www.Somanuals.com. All Manuals Search And Download.
130
131
Settings
Settings
Playing answer phone messages
(Play Answer Phone)
Fixed Dialling Number
Adding a Fixed Dialling Number
Setting the Hands-free function
1
Open the Fixed Dialling Number
display.
When the Fixed Dialling Number is set
to ON, you can limit your calls to only
the phone numbers registered on the
SIM/USIM card. You can add or edit
the phone numbers (up to 40 digits).
You must subscribe for this service.
The Hands-free function enables you
to talk with the phone placed on a flat
and stable surface. The sound coming
from the speaker is made louder and
the microphone sensitivity increased.
1
Open the Play Answer Phone
display.
• Press [Menu] →
→ Call
Settings → Fixed Dialling
Number
• Press [Menu] →
→ Call
Settings → Play Answer Phone
Select Play Message and press
O.
Press [Call]. The call is connected
to the message centre after which
you can listen to the answer phone
messages.
2
Press [List], enter PIN 2 and press
O. Press [Options] then select
New and press O.
2
3
1
Open the Hands-free Setting
display.
Activating or deactivating the Fixed
Dialling Number function
• Press [Menu] →
→ Call
Setting the Service Dialling
Numbers
Settings → Hands-free Setting
Select Voice Call or Video Call
and press O.
1
Open the Fixed Dialling Number
display.
2
3
• Press [Menu] →
Settings → Fixed Dialling
Number
→ Call
You can select from a default list of
provided services (phone numbers)
that are encoded on the SIM/USIM
card.
Tip: You can access the service centre
from the Standby display by pressing
and holding 1.
Select ON and press O.
Note: If the Silent, Car, or Meeting Profile is
set (see p. 108), you cannot activate
the Hands-free setting.
2
3
Select ON or OFF and press O.
Enter the PIN2 if prompted.
Cancelling display of the answer
phone icon
1
Open the Service Dialling Numbers
display.
Note: If no Fixed Dialling Numbers are
registered on the SIM/USIM card, this
function is not available.
1
Open the Play Answer Phone
display, select Hide Answer Phone
Icon, and press O.
• Press [Menu] →
→ Call
Settings → Service Dialling
Numbers
2
Select Yes and press O.
2
Select the desired service and
press t.
• To release the setting, select No.
Download from Www.Somanuals.com. All Manuals Search And Download.
132
133
Settings
Settings
Setting an image to send
Setting whether your voice is sent
or not
under the Call settings section. (See p.
129.)
Video calls
1
Open the Image Settings display.
• Press [Menu] → → Video
1
Open the Voice Setting display.
• Press [Menu] → → Video
Setting the method to switch a
video call to a voice call
1
Open the Auto Answer display.
• Press [Menu] → → Video
Call Settings → Image Settings
Select an image setting option and
press O.
2
Call Settings → Voice Setting
If you have made a video call to a
person whose phone does not have
the function, you must switch to a
voice call. You can set the switching
method to automatic or manual.
Call Settings → Auto Answer
Press [List], select New and press
O.
2
Select an option and press O.
2
3
Image Priority: Changes the image
quality based on transmis-
sion options, High Speed,
Normal or High Quality.
Send Own Image: Specifies if your
own image is sent to
ON:
Sends your voice to the
other party.
You can copy phone numbers from
the Call History, Address Book, and
so on, by pressing [Options] and
selecting Get number. Use the
navigation keys and O to select.
When you finished selecting a
number, a list of the registered Auto
Answer numbers appears.
OFF:
Cancels sending your voice
to the other party.
1
Open the Reconnection Method
display.
Setting the Auto Answer for a video
call
• Press [Menu] →
Call Settings → Reconnection
Method
→ Video
4
callers.
Alternate Video: Sets the alternative
video to send instead of
your own image.
This function (available only with the
use of a headset) enables you to
receive video calls without touching
any keys after the preset ringing time.
Registering callers’ numbers is
required before activating this function.
For setting the Auto Answer for the
voice call function, refer to “Setting the
Auto Answer (Voice Call Auto Answer)”
2
Select Auto or Manual and press
O.
5
6
Confirm the phone number is in the
list and press [Done].
Select ON and press O.
• If you select Manual, you will be
asked if you want to switch to a
voice call. If you select Auto the
call is automatically switched to a
voice call.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
135
Settings
7
8
Select Auto Answer Tone pattern
icon or Answer Time icon
and press O to set each item.
Press [Set] to complete the setting.
Adjusting the backlight level during
a video call
,
This function enables you to adjust the
brightness of the backlight to normal
(the default value) or minimum.
Using camera functions during a
video call
1
2
Open the Backlight display.
Calendar
• Press [Menu] →
→ Video
These functions enable you to zoom
the subject and switch the camera
between the front and the back during
a video call. You can also set them
before making a video call.
Call Settings → Backlight
Select Minimum or Normal for the
brightness and press O.
1
Open the Camera Settings display.
• Press [Menu] → → Video
Call Settings → Camera
Settings
2
Select Zoom or Switch Camera
and press O.
Zoom:
Enlarge or Normal
Switch Camera: Front or Back
Download from Www.Somanuals.com. All Manuals Search And Download.
136
137
Calendar
Calendar
The phone comes with a calendar that
enables you to organize information by
month, week and day. You can attach
selected photo or video data to
particular dates manually to assist in
remembering the corresponding item.
You can manage your appointments
by making Schedule entries for chosen
days, and assign an alarm for each
entry so the alarm sounds at the set
time and date. Up to 100 Schedule
entries, 100 To Do tasks and 10 Notes
can be registered in the Calendar.
: Means you have a To Do task on
the day.
: Means you have a Schedule entry
on the day.
: Means you have another thing to
be aware of on the day.
Opening or editing Schedule entries,
Notes, or To Do tasks
Schedule
1
Open an entry on the daily calendar
display.
Creating a new Schedule entry
1
In Standby mode, press [Menu],
highlight and press O. The
2
Press [Options], select Edit and
press O.
monthly calendar appears.
Press [Options], select Schedule
List and press O.
Press [Options], select New and
press O. A new Schedule entry
screen appears.
3
4
Select an item and press O.
Enter or edit the information and
press O to finish each item.
Press [Save].
2
3
2
Highlight the day and press O and
the daily calendar is displayed.
5
Opening the weekly calendar
Note: To create a new Schedule entry or To
• Press [Options] on the monthly
calendar display, select Week View
and press O.
• To go back to the monthly calendar,
press [Options], then select Month
View and press O.
4
Enter information under the items
described below. Press [Save] after
you finish entering the desired
information.
Do task, see p. 139 or p. 143.
Icons used in the Calendar
Opening the Monthly calendar and
viewing a day’s schedule
Note
Birthday
Task completed
Task uncompleted
Task expired but uncompleted
1
In Standby mode, press [Menu],
highlight and press O.
Opening the daily calendar
Select the day for which you want to
see detailed information on the weekly
calendar or monthly calendar displays
and press O. The daily calendar
appears.
The monthly calendar appears. The
following icons are displayed beside
the day.
Download from Www.Somanuals.com. All Manuals Search And Download.
138
139
Calendar
Calendar
Schedule items
URL: Enters the URL.
Details: Enters the content of the
entry.
Image: Pastes an image from the
Media Album.
web sites. Make sure there is a space
before or after the phone number and
email address when using other
characters in the same field.
3
4
Select a URL and press O.
Press [Yes].
Start date/time,
End date/
time: Use u / d or the
numeric keys to enter the
date/time.
Synchronising your Schedule entries
with those on a network server or
computer
Private: Indicates Privacy Mode is
ON or OFF.
Making a voice call or a video call
Repeat: Sets the repeating
pattern for the Schedule
entry; Every Day, Every
Week, Every Month,
Every Year, or OFF.
Category: Sets the category icon
chosen from the category
icon list.
Title: Enters a summary of the
entry.
Place: Enters the location of the
entry.
Alarm: Activates/Deactivates the
alarm by selecting ON or
OFF. Sets time/date, alarm
tone, alarm tone volume,
alarm image, vibration ON/
OFF and alarm priority.
1
Select an entry in the Schedule list
or open a Schedule entry.
1
Open the Schedule list, press
[Options], select Synchronise and
press O.
Refer to the procedures in
Connectivity (see p. 181).
2
Press [Options], select Call and
press O. A list of phone numbers
registered in the selected Schedule
entry appears.
Opening a Schedule entry
2
1
Open the monthly calendar, the
weekly calendar or the daily
calendar.
Press [Options], select Schedule
List and press O.
3
Select the number you want to call
Copying a Schedule entry to the
Media Album
2
3
and press
to make a voice call
t
or press
.
v
1
2
3
4
Select an entry in the Schedule list
and press [Options].
Select Copy to Media Album and
press O.
Select Copy, Copy Multiple, or
Copy All and press O.
Follow the on-screen instructions.
Select an entry and press O. The
entry display appears.
Accessing a web site
1
Select an entry in the Schedule list
or open a Schedule entry which
contains a URL address.
Operation Options
If you store phone numbers, message
addresses and URLs in Schedule
entries, you can use them to make
calls, create messages addressed for
the specified destinations, and access
2
Press [Options], select URL and
press O. A list of URLs registered
in the selected Schedule entry
appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
140
141
Calendar
Calendar
Registering a Schedule entry in the
Address Book
Deleting Schedule entries
Task items
To Do List
1
2
Select an entry in the Schedule list.
Press [Options], select Delete and
press O.
Title: Enters a title of the task.
Content: Enters the content of the
task.
Category: Sets the category icon
chosen from the category
icon list.
Due Date: Enters the due date.
Alarm: Sets alarm, melody or
vibration or no notification.
Repeat: Sets cycle, term, times
and expected days for the
task
1
2
3
4
Select an entry in the Schedule list
or open a Schedule entry.
This function enables you to manage
tasks. Once you register a task with a
due time, the To Do system automati-
cally categorizes it with one of the
labels “Completed”, “Uncompleted”,
and “Expired & Uncomplete” based on
how you have set up the To Do List.
Press [Options], select Save to
Address Book and press O.
Select Phone Number, Email
Address, or URL and press O.
Follow the on-screen instructions.
3
Select Delete, Delete Multiple,
Delete All, or Delete until
Yesterday and press O.
Displaying images in the Schedule
entries
Transmitting a Schedule entry to
another phone, PC or other device
1
Open the Schedule list, press
[Options], select Settings and
press O.
Creating a new To Do task
1
In Standby mode, press [Menu],
highlight and press O. The
1
2
3
Select an entry in the Schedule list
or open a Schedule entry.
Press [Options], select Send
vCalendar and press O.
Select Attach to Message, Send
via Infrared, or Send via
2
3
Select Image Display and press
O.
Select ON and press O.
Status: Shows the current
status of the task to the set
due date; Completed,
Uncompleted, Expired &
Uncomplete.
monthly calendar appears.
Press [Options], select ToDo List
and press O.
Press [Options], select New and
press O.
Enter information under the items
described below. Press [Save] after
you finish entering the desired
information.
2
3
4
Bluetooth and press O.
Completion Date: Enters the task
completed date.
Private: Sets Privacy Mode ON/
OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
142
143
Calendar
Opening the To Do list
Editing tasks
1
In Standby mode, press [Menu],
highlight and press O. The
monthly calendar appears.
Press [Options], select ToDo List
and press O.
1
Open the To Do list display, select
the category you want to display,
select the task you want to edit and
press O.
Press [Options], select Edit and
press O.
Select the desired item from the list
and edit.
Press [Save] after you finish
entering information.
2
2
3
4
Extras
You can change the displays of the
different categories All Data, Expired,
Uncompleted, and Completed by
pressing l / r.
All Data: Displays all the tasks
registered on the To Do list.
Expired: Displays tasks which have
yet to be done and have
already passed their due
date.
Uncompleted: Displays tasks which
have yet to be completed
and are still due.
Completed: Displays tasks which have
been completed already.
Download from Www.Somanuals.com. All Manuals Search And Download.
144
145
Extras
Extras
4
Select ON and press O to set the
alarm clock. The entry display
shown below appears.
• To deactivate the alarm clock
temporarily, select OFF.
Vibration: Selects a vibration
pattern and its strength,
High, Medium, or Low.
Alarm Priority: Puts a priority on
Alarm or Profiles. If Profiles
is selected, only the
Specifying the time to sound
Alarm clock
1
Select ON Fixed Sound at the
Snooze mode setting display and
press O.
In addition to the alarm clock, this
phone has a convenient feature called
“Snooze mode”, which sounds an
alarm every specified number of
minutes (1 to 5) up to six times after
the first alarm is turned off. You can
set up to 8 Alarm Clock entries. Each
entry can be allocated a customised
Alarm sound or vibration, image, and
repetition pattern.
2
Enters the time and press O.
Alarm name: Enters a name.
Alarm time: Enters an alarm time.
Repeat: Selects Every Day, Mon
– Fri, Mon - Sat, Except
Days Off, Set Day of the
Week or No Repeat.
"Snooze mode" setting: (See p.
147.)
Alarm Tone: Selects a sound.
Alarm Tone Volume: Adjusts the
alarm sound volume.
Alarm Image (image displayed
when the Alarm goes off):
Selects an image from the
preset images or images in
the Media Album.
vibrator operates in place
of the alarm sound. It is
available only when Profiles
is set to silent.
Setting the sound pattern
You can allocate sounds to the six
alarm tones individually by selecting
sounds from the Media Album.
5
6
7
Select an item and press O.
Edit the item and press O.
Press [Save] to save the setting.
1
Select ON Selected Sound at the
Snooze mode setting display and
press O. The six alarm tone entries
appear.
Setting the alarm clock
1
In Standby mode, press [Menu],
highlight and press O.
Setting the alarm for the time you
have specified every minute
(Snooze mode)
2
3
Select one of the six alarm tones
and press O.
Select a sound from the Media
Album folder or another folder and
press O.
2
Select Alarm Clock and press O.
A list of 8 empty entries appears.
• When an entry has already been
stored, its set time and repetition
pattern are displayed.
Opening Snooze mode setting display.
1
2
Open an Alarm Clock entry.
Select
(Snooze mode setting)
and press O.
3
Select an entry and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
146
147
Extras
Extras
4
Repeat the procedure until sounds
have been selected for all the
entries.
Press [Set] to finish the setting.
Enter the Snooze Time and press
[Set].
Resetting Alarm Clock entries
2
3
Select Calculator and press O.
The initial display of the calculator
appears.
Voice Recorder
1
In Standby mode, press [Menu],
highlight and press O.
You can record voice sounds up to the
total storage capacity of the phone’s
Media Album and SD Card. If a SD
Card is inserted, the voice sound is
automatically recorded onto that card.
5
6
Perform your calculation.
2
Select Alarm Clock and press O.
A list of eight Alarm Clock entries
appears.
Press
0 to 9 Enters the numerals 0 to 9.
Description
7
Press [Save] to save the setting.
;
Enters a decimal point.
Performs a calculation.
3
Select the entry you want to reset
to empty and press [Reset].
O
Clears the entered numbers/Clears
all calculator data.
Turning off the Snooze mode setting
[C/AC]
Recording your voice
• Select OFF at the Snooze mode
u
d
l
r
+
-
(Addition)
1
In Standby mode, press [Menu],
highlight and press O.
setting display and press O.
Calculator
(Subtraction)
× (Multiplication)
2
3
Select Voice Recorder, press O.
Select Record and press O. The
phone is now in Voice Recorder
mode.
When the set time arrives
You can perform the addition,
subtraction, multiplication, and division
on numbers consisting of up to 10
digits.
÷ (Division)
4
Press y to return to the Standby
display.
The alarm sounds for up to 60
seconds. Press [Stop] or any other key
to silence the alarm.
4
5
Press [Record] to start recording.
Press [Stop] to stop the recording.
Notes: • The calculator can display up to
10 digits.
•
The alarm sound stops and the phone
goes into Snooze Mode (if it is set).
Note: If an incoming call or an alarm is
detected while you are using the
• If the result of a calculation is
more than “9,999,999,999” or less
than “-9,999,999,999”, “E” is
shown at the right end of the
display. Press [C/AC] to clear.
• If the result of a calculation is
negative “-” appears to the left of
the number.
• Press and hold O to cancel the
Snooze mode.
• If you receive an incoming call during
Snooze Mode, the mode is
automatically cancelled.
calculator, the calculation is automatically
terminated without storing the result.
1
In Standby mode, press [Menu],
highlight and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
148
149
Extras
Extras
Setting the sensitivity of the
microphone
Convenient key operation during
playback
2
3
4
Select Notes and press O, then
select Note and press O.
Notes
Select an unregistered item and
press [Options], then select Edit.
Enter characters as desired and
press O then select the category
icon from the list and press O.
Sound volume control up/down: Press
u / d.
Fast-forward: Press and hold r.
Rewind: Press and hold l.
This function enables you to use the
phone as a notepad. Up to 10 note
entries each of up to 256 bytes can be
stored. You can link an entry to a
specified day in the Calendar. Once
The sensitivity of the microphone can
be adjusted for recording your voice or
the voices of people further away,
such as on stage or on conference
speakers.
they are linked, an icon
is attached
to the day on the Calendar display, so
that you can easily check what you
have to do on the day.
Opening a Note entry
1
2
Press [Options] in the Voice
Recorder mode.
Select For Conference or For
Dictation and press O.
1
Open the list of Notes.
• Press [Menu] →
Note
→ Notes →
Creating a Note entry
2
Select a Note entry and press O.
Playing back voice data
Note entries can be registered with
category icons added to them. There
are over 40 kinds of category icons,
Editing a Note entry
1
In Standby mode, press [Menu],
highlight and press O.
1
Open the list of Notes.
• Press [Menu] →
Note
→ Notes →
including
School,
etc.
Work,
Holiday,
Private,
Meeting,
2
3
Select Voice Recorder, press O.
Select Play and press O to go to
the Melody & Ringtones folder in
the Media Album.
2
Select a Note entry, press
[Options], then select Edit and
press O.
1
In Standby mode, press [Menu],
highlight and press O.
4
Select a compatible sound file and
press O to play the file.
3
4
Edit the entry and press O. A list of
category icons appears.
Select an icon and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
150
151
Extras
Extras
Using the Call Note
3
Select a video (audio) file from the
All Videos (All Audios) folder or a
Playlist folder of your own making
and press O. (See p. 155 for
making a Playlist.)
World Clock
Media Player
Storing the phone number during a
call
•
With the Media Player you can play
compatible audio or video files,
create playlists, skip to other songs
or videos and so on. Media Player is
easy to use, and the controls are
similar to the buttons on a compact
disc player. You can also send video
or audio files via Picture Messages
or Email.
You can display the time of an
available world city. There are 36 major
cities to choose from.
1
Enter the number using the
numeric keys during a call and
press O.
Displaying the World Clock
2
Select Call Note, and press O.
The phone number is stored and
you can continue talking.
1
In Standby mode, press [Menu],
highlight , press O.
2
Select World Clock and press O.
The World Clock display appears.
• Use l / r to select the city for
which you want to display the
time.
Retrieving the Dial Note after the call
1
In Standby mode, press [Menu],
highlight and press O.
Playing a video or audio file
• This display is referred to as the
“Play Video mode” or “Play Audio
mode” in this guide.
1
From the Standby display, press
[Menu] highlight and press O,
2
Select Notes, press O, select Call
Note, and press O. Stored Call
Note numbers appear in the
• Press [DST] for daylight saving
time.
select Media Player, and then
press O.
display. Select the desired number.
3
Press y after your finished.
2
Select Play Video (or Play Audio)
and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
152
153
Extras
Extras
Icons Used
Play
Skipping to the next file or going back
to the previous file
Playing files randomly
Using Playlists
1
Press [Options] while playing in
Play Video (Audio) mode, select
Play Settings, and then press O.
Select Random Playback, select
ON, and then press O.
The All Videos (All Audios) folder in the
Video Playlist (Audio Playlist) is
automatically created by default. You
can create your own Playlists with files
included in the order you desire.
• Press ; / n.
Pause
Random Play
Forwarding or rewinding a file
2
Repeat
• Press and hold l / r while playing
the file.
Repeat All
Change the display size available
using the 0 key
Creating a new Playlist
Sending a video (audio) file
Playing one file or all files repeat-
edly
1
Open the Media Player.
You can send a video (audio) file
attached to a Picture Message or
Email message (See p. 72.). You can
also use the Bluetooth function (See p.
169) or Infrared function (See p. 177.)
to send a file.
Original size display is set
Large size display is set
• Press [Menu] →
Player
→ Media
1
Press [Options] while playing in the
Play Video (Audio) mode, select
Play Settings, and then press O.
Select Repeat Playback, select
Repeat or Repeat All, and then
press O.
2
3
Select Play Video (or Play Audio)
and press O.
Playing or pausing a file
Press [Options], select New, and
then press O. Give the Playlist a
name and press O. The Video
(Audio) file selection display
appears.
• Press O. (
for Play or
for
2
Pause)
Stopping a file
• Press
.
4
Select a file you want to include in
your new Playlist, and press O.
The selected file is placed in the
first line.
Adjusting the volume
• Press u / d.
Download from Www.Somanuals.com. All Manuals Search And Download.
154
155
Extras
Extras
5
6
Press [Next] to go back to the
Video (Audio) file selection display
to choose another file.
Select the next file and press O.
The selected file is added to the
second line.
Repeat this step for all the files you
want to add to the Playlist.
Press [Complete] to finish creating
the new Playlist.
Editing a Playlist
Streaming audio and video
Keeping the backlight illuminated while
streaming
You can add or insert a file into a
Playlist, or change the file order in a
Playlist.
The S750i enables you to receive a
continuous stream of music or video
by connecting to a streaming site on
the web. Using streaming technology,
you can instantly listen to audio files or
view video files without having to
download the entire file.
The phone is set to illuminate the
backlight for a certain time after there
are no key presses by default.
1
Open the Media Player.
7
8
• Press [Menu] →
Player
→ Media
1
2
Select Light in Player Settings and
press O.
Select Always ON and press O.
2
3
Select Play Video (or Play Audio)
and press O.
Key operations while streaming audio/
video
Select the Playlist you want to edit
and, press [Options], select Edit
and press O. Highlight the desired
file and press [Options], then select
the desired operation from the list
and press O.
Changing the Media Player’s skin while
streaming
• To adjust the volume, press u / d.
• To play or pause a file, press O (
1
Select Skins in Player Settings and
press O.
for Play
for Pause).
2
Press [Prev.] or [Next] to preview
the Skin, and then press O to set.
Player Settings
Opening Player Settings
1
Open the Media Player.
• Press [Menu] →
→ Media
Player
2
Select Player Settings and press
O.
Download from Www.Somanuals.com. All Manuals Search And Download.
156
157
Extras
Opening the SIM Toolkit
Menu
Using the Help guide
This phone’s on-screen Help enables
you to quickly confirm key operations
for various functions.
You can access the SIM toolkit menu if
your SIM/USIM card supports this
additional service. Menu names and
contents vary depending on the SIM/
USIM card you purchase. Contact
your mobile phone stockist for details.
1
2
Open the Help display.
Orange World
• Press [Menu] →
→ Help
Select a function by scrolling with
u / d.
1
2
Open the SIM Toolkit display.
• Press [Menu] →
Toolkit
→ USIM
Displaying the call time
Select the desired menu and follow
the instructions.
See page 12.
Download from Www.Somanuals.com. All Manuals Search And Download.
158
159
Orange World
Orange World
Using bookmarks
Using web pages saved in the
Saved Page folder
Browser Settings
See p. 121.
Web browsing
The phone enables you to save URLs
in the Bookmarks folder within the
Media Album, and attach bookmarks
to messages as well as manage them,
for example, editing or moving them to
different folders.
You can access web pages and
update them from the Saved Page
folder.
Accessing WAP sites on the
Internet
1
In Standby mode, press [Menu],
highlight and press O.
Opening the Saved Page folder in the
Media Album
2
Select the desired WAP site from
the Bookmarks list.
Opening the Bookmarks folder from
the Media Album
1
In Standby mode, press [Menu],
highlight and press O. A list of
• While browsing pages, use u / d to
scroll up or down, and O to select
an item to execute the command.
Press B to return to the previous
display.
1
In Standby mode, press [Menu],
highlight and press O. A list of
folders appears.
2
Select Saved Page and press O.
folders appears.
2
Select the Bookmarks folder and
press O.
Accessing a web page from the Saved
Page folder
1
Open the Saved Page folder
display.
Select the web page you want to
access and press O.
Web based help
Accessing a web site from the
Bookmarks display
• To view instructions etc. on how to
use your phone, from the Standby
display select
2
1
2
Open the Bookmarks display.
Select a bookmark and press O.
→ Help
Download from Www.Somanuals.com. All Manuals Search And Download.
160
161
Games
Download from Www.Somanuals.com. All Manuals Search And Download.
162
163
Games
Games
Your phone enables you to play
Downloading Java™ applications
from Orange World
Volume Setting: Select the level using
u / d and press O.
Vibration Setting: Select ON or OFF
and press O.
Java ™ Settings
various preset, downloadable, WAP
and text based games. Open Games
from the main menu to start saved
applications (Java™ Games), play
WAP or text games or download new
applications (More Games), or define
the settings (Java™ Settings).
Opening the Java™ Settings
1
In Standby mode, press [Menu],
highlight and press O.
1
In Standby mode, press [Menu],
highlight and press O.
2
3
Select More Games and press O.
Press [Yes] to connect to Orange
World and download the desired
Java™ application by following the
on-screen instructions.
Setting the backlight and blinking
pattern
2
Select Java™ Settings and press
O.
You can set the backlight to always be
ON or OFF from the Light settings. You
can also define whether to enable or
disable the backlight control as
programmed in some Java™
applications from the Flash Control
settings.
Setting the play volume and
vibration
Playing Java™ games
You can start Java™ games from the
Games application list (Preset and
downloaded applications) or by
accessing Orange World.
Deleting applications
You can adjust the play volume of the
Java application to one of 5 levels or
set it to OFF. You can also set whether
or not to vibrate the phone as
programmed in some Java applica-
tions.
1
Open Java™ Games, select the
application you wish to delete, and
then press [Options].
2
Select Delete, press O and then
confirm you want to delete by
pressing [Yes].
Starting from the application list
1
Open Java™ Settings, select
Light and press O.
1
2
3
In Standby mode, press [Menu],
highlight and press O.
Select Java™ Games and press
2
3
Select ON/OFF and press O.
Select from the following options.
1
2
Open Java™ Settings, select Play
Volume/Vibration and press O.
Select Volume Setting or
Notes: • Maximum of 50 games can be
stored in memory (including preset
games).
O.
Select an application and press O
Vibration Setting and press O.
• Preset games cannot be deleted.
to start.
Download from Www.Somanuals.com. All Manuals Search And Download.
164
165
Games
Always ON: Turns on the backlight
while a Java™ application is
running.
Always OFF: Turns off the backlight
while a Java™ application is
running.
Normal: Lights when a key is pressed
for the duration set in the Key
Light setting in the Light
setting menu (See p. 110).
Re-setting all Java™ Settings or
Deleting all Java™ applications
1
Open Java™ Settings, select
Delete Java™ Settings and press
O.
2
Select Reset Settings or Clear All
Memory and press O. Enter your
password when asked.
Connectivity
Reset Settings: Resets all the Java™
settings. Saved data is not
delated.
Clear All Memory: Deletes all the
Java™ applications saved
in Java™ Games except
the pre-installed applica-
tions.
4
After completing ON/OFF Setting in
step 2, the display returns to the
Light settings. Select Flash
Control and press O.
5
Select ON or OFF and press O.
ON:
Enables a Java™ applica-
tion to control flashing of
the backlight.
OFF:
Disables a Java™
application from controlling
flashing of the backlight.
Download from Www.Somanuals.com. All Manuals Search And Download.
166
167
Connectivity
Connectivity
Bluetooth® transmission
Table 1
automatically and provides easy
connection to another Bluetooth
enabled device such as a headset or
PC.
1
Activate Bluetooth reception mode
on the receiving device.
• When using an S750i as the
other device:
On the other S750i, press and
hold O.
Transmittable/
Exchangeable Content
Format
Bluetooth is a radio technology that
enables you to use a wireless
Owner Information (Electronic
Business Cards), Address
Book
vCard
connection to send or exchange data
such as indicated in Table 1. The
phone detects all Bluetooth compat-
ible devices that are turned on and set
to transmittable within a maximum
range of 10 metres and displays a list
of them on the screen when search is
used. However, transmissions must be
performed one device at a time. For
additional information, download and
view the Bluetooth Setup Guide from
the ‘Service’ → ‘Downloads’ section
at http://www.sanyo-mobile.com.
• Press and hold O from the Standby
vNote
Entries in the Notes
To Do tasks
display. Make sure
appears in the
2
3
Open Media Album folder on your
S750i.
vTo Do
vCalendar
Schedule events
phone’s display (see p. 176). If you
press and hold O again, Bluetooth
mode is switched off.
• Press [Menu] →
→ Picture,
To send data, on the receiving device
activate the Bluetooth data reception
mode (refer to your receiving device’s
manual).
Video List, Melody & Ringtones
or Documents → O
Select a data item to send and
press [Options].
Select Send and press O.
Select Send via Bluetooth and
press O.
Select Send → [Yes] → [Search]
Select a connectable device and
press O.
• If the other device is not saved in
your Connection List (your list of
registered devices. see p. 176)
and Bluetooth Password
authentication (see p. 178) is
required, you will be prompted to
Notes: • This setting remains in effect after
the phone is turned off and on
again.
4
5
• While the phone is in Bluetooth
mode power consumption is greater
than when it is not.
Note: No incoming calls or messages can
be received during Bluetooth
transmission. Data protected by
copyright or copy guards cannot be
transmitted or exchanged.
6
7
Sending data via Bluetooth from the
Media Album
Switching the Bluetooth mode on or
off
Note that you must first move your SD
Card data to your phone’s memory
before performing the following.
Switching the Bluetooth mode on
enables your S750i to receive data via
Bluetooth from a paired device
Download from Www.Somanuals.com. All Manuals Search And Download.
168
169
Connectivity
Connectivity
save the other device in the list.
Press [Yes] if you want to do so.
The device is registered after
Bluetooth Password authentica-
tion is completed.
To complete Bluetooth Password
authentication, enter any desired
number between 1 and 8 digits
(See p. 178) and press O.
• When using another S750i as the
other receiving device:
Press [Yes] to save your S750i in
the Connection List on the other
S750i.
• The timing of being prompted for
the Bluetooth Password may
differ depending on the device
you are connecting with.
Sending vCard, vNote, vToDo or
vCalendar via Bluetooth
→ Send vCard → Send via
Bluetooth
• To send a vCard
Bluetooth from the Media Album.”
see p. 169.)
You can send Address Book or Owner
Information data or others to another
Bluetooth device. Activate Bluetooth
reception mode on the receiving
Step1 → Send → [Yes]
Sending a To Do task (vToDo)
• To send multiple vCards
Step1 → Send Multiple →
Check desired entries and press
O → Repeat the same steps for
multiple items → [OK] → [Yes] →
[Search] to search the device
Follow the instructions on the
display. (Refer to procedures from
step 6 of “Sending data via
Bluetooth from the Media Album.”
see p. 169.)
1
Press [Menu] →
→ [Options]
8
→ ToDo List → Select a ToDo task
→ [Options] → Send vToDo →
Send via Bluetooth → Send or
Send Multiple
Follow the instructions on the
display. (Refer to procedures from
step 6 of “Sending data via
Bluetooth from the Media Album.”
see p. 169.)
device before you start sending data.
Sending Owner Information data
(vCard)
2
2
1
Press [Menu] →
→ Owner
Information → [Options] → Send
vCard → Send via Bluetooth
Follow the instructions on the
display. (Refer to procedures from
step 6 of “Sending data via
Bluetooth from the Media Album.”
see p. 169.)
2
Sending a schedule event (vCalendar)
Sending a Note (vNote)
1
Press [Menu] →
→ [Options]
1
Press [Menu] →
→ Notes →
→ Schedule List → Select a
schedule event → [Options] →
Send vCalendar → Send via
Bluetooth → Send or Send
Multiple
9
Save the data on the other
receiving device.
• When using an S750i as the
other receiving device:
Note → [Options] → Send vNote
→ Send via Bluetooth → Send or
Send Multiple
Follow the instructions on the
display. (Refer to procedures from
step 6 of “Sending data via
Sending Address Book information
(vCard)
2
1
Press [Menu] →
→ Contacts
Select Save and press O.
2
Follow the instructions on the
display. (Refer to procedures from
List → Select an entry → [Options]
Download from Www.Somanuals.com. All Manuals Search And Download.
170
171
Connectivity
Connectivity
Note: While your S750i is in Bluetooth
mode and the other device has been
registered in your Connection List,
your Owner Information will be
automatically sent if requested by a
registered device.
occur quickly.
step 6 of “Sending data via
Bluetooth from the Media Album.”
see p. 169.)
PC (Bluetooth enabled)
• Do not press any keys while data is being
exchanged or disconnection of
transmission may occur.
1
2
On the PC's display, enter your
Bluetooth Password (Must match
the S750i you are connecting with)
after the authentication prompt for
connection with your S750i
appears.
Receiving data
Using the Bluetooth headset
You must switch the Bluetooth mode
on to receive data from another device.
The Bluetooth headset can be
wirelessly connected to the phone,
and allows you to make and receive a
call handsfree. Read your Bluetooth
headset user manual before using. For
additional information, download and
view the Bluetooth Headset Guide
from the ‘Service’ → ‘Downloads’
section at http://www.sanyo-
Your S750i
Select the owner information and
begin the exchange.
1
Press O
→
Bluetooth
→
• To switch the Bluetooth mode on,
press and hold O. Make sure
appears in the phone’s display. Save
the data when the transmission is
finished.
Exchange Owner Info
2
3
4
Press [Search].
Note: Refer to your PC's user guide for
Select the PC device and press O.
Once prompted to save to the
Connection List, press [Yes].
Enter a Bluetooth Password (Must
match the PC you are connecting
with) and press O if you have not
already saved it in the Connection
List.
Refer to steps 1 and 2 below for
PC side operations.
Select Save and press O to save
the data received from the PC on
your S750i.
details on Bluetooth operations.
Regarding other generic Bluetooth devices
such as mobile phones:
5
6
Exchanging Owner Information
mobile.com.
•
You may be required to save your S750i in
the connection list on the other device.
Enter the Bluetooth Password if prompted.
• The timing of being prompted to save
your S750i in the connection list and save
the owner information on the other device
may be different depending on the device.
• For smooth operation you may need to
respond quickly to another device's
Bluetooth Password prompt as the
You can send and receive Owner
Information data between your phone
and another PC, PDA or mobile phone.
The following example indicates an
exchange between your S750i and a
PC. The initiator is your S750i.
You must activate Bluetooth mode on
your PC before performing the
following.
Configure both devices
1
Activate the Bluetooth pairing
mode on the Bluetooth headset.
On your S750i, press O →
Bluetooth → Connect to Hands-
free
2
3
Press [Search].
Bluetooth timeout of that device may
Download from Www.Somanuals.com. All Manuals Search And Download.
172
173
Connectivity
Connectivity
4
5
Select the Bluetooth headset and
press O.
Enter the Bluetooth Password
written in your headset’s user
guide.
Disconnecting the connection
Connecting the phone and your
laptop PC to use the Internet
3
For further instructions, refer to the
Modem Setup Guide from the
You can disconnect the already
established connection.
‘Service’
→
‘Downloads’ section at
You can use the Internet anywhere as
long as you have your phone and a
portable laptop PC. This function
enables the phone to work as a
modem for the PC connecting them
together via Bluetooth. You can also
use the USB cable (included) to
connect to the Internet. For additional
information, download and view the
Modem Setup Guide from the ‘Service’
→ ‘Downloads’ section at http://
www.sanyo-mobile.com.
http://www.sanyo-mobile.com
1
On the S750i, press O →
Bluetooth → Disconnect Hands-
free
Transferring data on your phone to
a Bluetooth compatible PC and vice
versa
Activating the Bluetooth hands-free
mode on your S750i
Note: If your headset is moved far enough
out of range from the S750i to cause
a disconnection, reconnection is
automatic given the following
conditions.
• Press and hold O from the Standby
display.
You can transfer data from your
phone’s Media Album to your PC and
vice versa.
Or press O from the Standby
display and select Bluetooth →
Switch Bluetooth ON
1) Your S750i is in Bluetooth mode.
2) You (and your headset) move back
into the connectable range.
1
2
Pair your phone with your
Bluetooth compatible PC.
Use your PC’s Bluetooth software
to initialise the data transfer or
perform the transfer from your
phone.
Now, your S750i is ready tos be
automatically discovered and con-
nected with the hands-free kit /headset.
In some cases, you may need to be
immediately next to the handset in
order to reconnect. If reconnection of
your headset with the S750i does not
occur automatically, you must initiate
connection from the headset. For
details refer to your headset’s user
guide.
1
Activate the Bluetooth mode on
your Bluetooth compatible PC or
Bluetooth USB/Card adaptor, etc.
Note: To turn off Bluetooth mode, press
and hold O again.
Note: Before using, refer to the user guide
Note: Refer to your PC’s Bluetooth software
of your Bluetooth USB/Card or PC.
user's guide for more information.
2
Press and hold O from the
Standby display on your S750i to
activate the Bluetooth mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
174
175
Connectivity
Connectivity
Bluetooth settings
Displaying the address ID of registered
devices
Protecting registered devices from
deletion
2
3
4
Select an entry, press [Options].
Select Delete and press O.
Select Delete, Delete Multiple, or
Delete All and press O.
• To delete multiple items, select
the desired and press O →
Repeat the same steps for
multiple items → [OK] → [Yes]
• To delete all items, enter the
security code when prompted →
[Yes]
1
Open the Bluetooth Settings
display.
1
Select Connection List from the
Bluetooth Settings display and
press O. A list of registered
devices appears.
1
Select Connection List from the
Bluetooth Settings display and
press O. A list of registered
devices appears.
• Press O → Bluetooth →
Bluetooth Settings
2
Select an entry, press [Options],
select Device Address and press
O.
2
3
Press [Options], select Protect/
Unprotect and press O.
Select the entry you want to
protect and press O. A key icon
appears to the left of the entry.
Repeat for all those you want to
protect.
Keeping your S750i from being
detected by another Bluetooth
enabled device
• For registering devices in the
Connection List, see step 7 on p.
169.
This function enables your S750i (while
in the Bluetooth mode) to be undetect-
able by another Bluetooth device. This
feature is useful to prevent unwanted
connections from an unknown device.
Setting the period to search for
connectable devices
Editing the names of registered
devices
• To apply the protection, press
[OK].
• To release the protection, select
the key icons, and press O, then
press [OK] to finish.
1
Select Search Time from the
Bluetooth Settings display and
press O.
Enter a time (10 to 30 seconds)
using u / d and press O.
1
Select Connection List from the
Bluetooth Settings display and
press O. A list of registered
devices appears.
1
2
Select Visibility from the Bluetooth
Settings display and press O.
Select Hidden and press O.
• To release the setting, select
Always Visible (the default) or
Visible for 3Min.
2
Deleting entries of registered devices
2
3
Select an entry, press [Options],
select Rename and press O.
Edit the name and press O.
Setting the Bluetooth Timeout for
connection
1
Select Connection List from the
Bluetooth Settings display and
press O. A list of registered
devices appears.
• While Visibility is set to Always
Visible or Visible for 3Min. in
the Bluetooth mode,
in the phone’s display.
You can change the Bluetooth
Timeout for connection. The Bluetooth
appears
Download from Www.Somanuals.com. All Manuals Search And Download.
176
177
Connectivity
Connectivity
to the other device. However this
may be different depending on the
device and device settings.
• No incoming calls or
messages can be received
during Infrared transmission.
Timeout setting does not affect the
duration of a Bluetooth connection
after it is established.
Confirming the detailed information in
the Bluetooth settings
• Select Check Setting on the
Bluetooth Settings display and press
O. The following information is
displayed: The name of your mobile
phone, the device address and the
current setting status in Authentica-
tion and supported services.
Editing your own Device Name
Infrared transmission is possible when:
• The two devices are turned on and
set to transmittable.
• Infrared ports are both facing each
other and are within a distance of at
least approx. half a metre or closer.
• There are no line of sight obstruc-
tions between the devices.
Turning off Bluetooth Password
authentication
1
Select Own Device Name from the
Bluetooth Settings display and
press O.
Edit the current name and press
O.
Bluetooth Password authentication
requires you to enter a 1 to 8 digit
number of your own creation upon
each connection with another
Bluetooth compatible device, insuring
your phone and the other device are
authenticated each time upon
connection. However, if you wish to
skip this authentication step, you can
turn the setting off.
2
Changing the Authentication Password
Infrared transmission
1
Select Authentication Password
on the Bluetooth Settings display
and press O.
Select Change and press O.
Enter the handset’s security code.
Enter a new authentication
password.
Sending Media Album folders
Infrared is a wireless infrared transmis-
sion system to transfer data on your
phone with another device with a built
in infrared port. Infrared technology
enables your phone to send and
receive contacts, your phone’s
information (Owner Information),
calendar events, To Do tasks, pictures
and videos, etc.
1
Activate receiving mode on the
receiving device.
• When using an S750i as the
other device:
On the other S750i, press [Menu]
→ Connectivity →
Infrared → Receiving Mode →
2
3
4
1
Select Bluetooth Password From
the Bluetooth Settings display and
press O.
5
Press O.
→
2
Select OFF and press O.
Note: This authentication password is
different from the Bluetooth
Password.
[Yes]
Note: Even when this setting is Off, your
phone may be prompted to enter the
Bluetooth Password corresponding
2
Open the list of Media Album
folders on your S750i.
Cautions: • SD Card data cannot be
transmitted.
Download from Www.Somanuals.com. All Manuals Search And Download.
178
179
Connectivity
Connectivity
3
4
Press [Options], select Send via
Infrared and press O.
Select Send Folder, Send
Multiple Folders, or Send All and
press O.
• To send one folder, press [Yes].
• To send selected folders, select
the desired item and press O →
Repeat the same steps for
multiple items → [OK] → [Yes]
• To send all folders, enter the
handset’s security code and
press O. Enter the Authentica-
tion Password of the device you
are connecting to (See p. 181.)
→ [Yes] → Add or Overwrite
4
5
Select a data item and press O.
Press [Options], select Send and
press O.
Select Send via Infrared and press
O.
Select Send, Send Multiple, or
Send All in Folder and press O.
Follow the instructions on the
display. (Refer to procedures
above.)
Address Book, Schedule, To Do,
Notes and Media Album appears.
Put a checkmark in the box next to
each category you want to send by
pressing O. After you have placed
a check mark for all of the desired
folders press [OK] to finish. Enter
the Authentication Password (See
p. 181.) and press [Yes].
Changing the authentication
password
4
Allows the sender to require the
authentication upon connection with
another device.
6
7
8
1
Open the Authentication Password
display.
• Press [Menu] →
→ Connec-
tivity → Infrared → Authentica-
tion Password
Receiving data (Receiving Mode)
Sending all data files from Settings
(Send All Mode)
2
3
Select Change and press O.
Enter the handset’s security code
and press O.
This function enables your phone to be
ready to receive data from another
device via infrared.
You can transmit categorised data in
the phone to another device via
Infrared.
4
5
Enter a new Authentication
Password.
Press O.
1
2
3
Open the Receiving Mode display.
• Press [Menu] → → Connec-
tivity → Infrared → Receiving
Sending data files from the Media
Album folder
1
Open the Send All Mode display.
• Press [Menu] → → Connec-
tivity → Infrared → Send All
Mode
Enter the handset’s security code
and press O.
A list of data categories such as
Mode
1
Activate receiving mode on the
receiving device. (See step 1 on p.
181.)
Open a list of Media Album folders
on your S750i.
Synchronising contacts or
To Do tasks
Press [Yes]. Now your S750i is
ready to receive data via Infrared.
Start the sending operation on the
other device.
2
3
2
You can exchange, update or replace
data in the Address Book, schedule
and To Do tasks between the phone
Save the data on your S750i.
3
Select a folder and press O.
Download from Www.Somanuals.com. All Manuals Search And Download.
180
181
Connectivity
Connectivity
and a network server or between the
phone and a computer.
Server URL: Displays the server URL.
User Name: Displays the user name.
Password: Displays the current
password.
Method: Displays the following
synchronisation methods.
3
Press [Start] and press [Yes] to
start synchronisation.
Method, Method, Selected Data,
Database (Address Book),
Database (Schedule), and
Database (To Do):. Select other
items and edit if desired.
• If you want to define a new
profile, select No items, press O
and enter each item.
• For an explanation of the above
items, see p. 182 “Synchronising
data between the phone and a
network server”.
• Communication Method: Select
Bluetooth, Infrared, or USB.
Press [Start] and press [Yes] to
start synchronisation.
Opening the Synchronise display
Synchronising data between the
phone and a computer
• Press [Menu] →
→ Connectiv-
ity → Synchronise
You can synchronise data on your
S750i with data on your PC. For
detailed instructions, view the
Synchronisation Setup Guide and
download the Sychronisation software
from the ‘Service’ → ‘Downloads’
section at http://www.sanyo-
mobile.com
• Mobile ↔ Server (Normal):
Only data that has been changed is
exchanged between the phone and
the server.
• Mobile → Server (Replace):
All data on the server is replaced
with the phone data.
Synchronising data between the
phone and a network server
1
Select Network on the Synchronise
display and press O.
2
Select a network profile and press
O. The items described below for
the current setting status appear.
Select an item and edit it if desired.
3
Note: You will need to install the S750i’s
USB driver before synchronising with
your PC using the USB cable.
Selected Data: Selects data in the
Address Book, schedule,
and To Do list.
Database (Address Book): Registers a
database name for
Address Book.
Database (Schedule): Registers a
database name for
Notes: • When you are indicating your
password and user name, both
must match on the phone and
your PC.
Notes: • If you want to define a new profile,
select No items and press O and
enter each item.
1
2
Select Local on the Synchronise
display and press O.
Select a local profile. The items of
the current setting status appear as
follows, Profile, User Name,
Password, Communication
• Using the synchronisation function
requires an additional service
subscription.
• To utilize this function, make sure
you are using Microsoft Outlook
on your PC. Outlook Express is
not supported.
schedule.
Database (To Do): Registers a
database name for To Do.
Profile:
Displays the profile name of
your Infrared system.
Download from Www.Somanuals.com. All Manuals Search And Download.
182
183
Connectivity
Connectivity
Setting a regular period for
synchronisation between the phone
and the network server
Standard Print: Prints each photo on
one sheet.
Index Print: Prints multiple thumbnail
photos on one sheet.
Printer Default: Prints the photo
according to the default
printer settings.
DPOF Print: Prints the indicated
photos (See p. 97).
1
2
3
In the Standby display, press
8
9
Select Copies, and press O. Use
the navigation keys to select the
number of copies and press O.
Select Print Size, select the
[Menu], select highlight
and
press O.
Select Connectivity and press O,
select Print Mode and press O,
then select Execute and press O.
Once the “Please connect to
printer” message is displayed
connect the USB cable (included)
to the phone and printer.
Select either Standard Print,
Index Print, or Printer Default.
Select Images to Print and press
O.
1
Select Auto Synchronisation on
the Synchronise display, then ON
and press O.
desired print size and press O.
10 Select Date Print, select ON or
OFF and press O.
11 Press [Print].
2
Select an item with an icon, set the
starting time and select the period.
: Enters the time.
: Selects Every Day, Every Week,
Every Month or No Repeat.
4
5
Transmitting data on the SD
Card to a PC via USB
Printing from your digital photo
printer (Not included)
Notes: • Install the S750i USB driver that is
on the CD-ROM included in the
box at time of purchase. Read the
digital photo printer (not included)
manual before using.
<Select Profile>: Select from a profile
entry.
You can transmit all the SD Card data
from the phone to a PC through a
USB cable and edit the data from the
computer. Do not remove the USB
cable when using this function.
Note: Press [SD Card] if you want to select
data stored on the inserted Memory
Card.
Printing
• Make sure your battery is fully
charged before using this
function.
6
Select the folder where your
photo(s) are stored and press O,
then select the photo(s) to print and
press O.
You can print out photos stored on the
handset or Memory Card. Select from
Standard Print, Printer Default, Index
Print or DPOF Print.
1
2
3
Connect the phone to the PC with
a USB cable.
Select USB Storage Mode and
press O.
• Greyed out items cannot be
selected. Not all printer are
compatible, check your printer’s
user guide to confirm.
7
Press [OK] when you finished.
Press [Yes].
Download from Www.Somanuals.com. All Manuals Search And Download.
184
185
Connectivity
Note: For detailed instructions, view the
‘USB Storage Mode Guide’ from the
‘Service’ → ‘Downloads’ section at
http://www.sanyo-mobile.com
computers in which the S750i device
is not indicated in the task tray but it
is connected and being accessed.
Make sure the SD Card is not being
accessed before removing either the
USB cable or SD Card.
You will need to install the S750i’s
USB driver on your PC before using
the USB cable and this function.
• Do not remove the battery pack
while transferring data.
Cautions: • While the phone is in the USB
Storage Mode, no incoming
calls or messages can be
received.
Safety
• Do not use a computer to modify,
move, or add data on the SD Card.
• Ensure there is ample battery charge
remaining before using. Not doing so
may result in data errors or damage,
as well as possible problems with
your S750i.
• Use an SD Card that has been
formatted on your S750i. SD Cards
that have been formatted on a
computer etc. may not be recogniz-
able on your S750i.
• Only USB1.1 is available.
• Data may become corrupted if
you do not follow the proper
procedures or instructions
that appear as a dialog
Precautions
messages in the task tray.
Precautions when using the SD
Card and the USB Storage Mode
• Disconnecting the USB cable or
removing the SD Card while the SD
Card is being accessed may cause
serious damage to the SD Card,
S750i and computer. There may be
some cases on Windows Me/98SE
• Do not turn off the computer’s power
switch or change to the standby
mode when using USB Storage
Mode. Doing so may result in not
being able to perform data transfer
even after rebooting your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
186
187
Safety Precautions
Safety Precautions
Do not use near medical devices or
on board aircraft
• Do not hold the receiver near your
ear except during a call, as a
sudden sound from the ringing
speaker may result in damaging your
hearing.
• Should you use the phone orien-
tated with its back adjacent to your
body (e.g., when using the headset),
maintain a suitable distance
between phone and your body.
• Before boarding an aircraft, be sure
to first cancel Auto Power On and
any other alarm settings, and then
turn the phone off.
• To avoid traffic accidents, do not use
a mobile phone while driving. Park
the vehicle first and then use the
phone. Always secure the phone in
its holder; do not place the phone
on the passenger seat or where it
can become dislodged in a collision
or sudden stop.
• RF signals may affect improperly
installed or inadequately shielded
electronic systems in motor vehicles.
Check with the vehicle manufacturer
or representative regarding use.
• Do not make any changes or
modifications to your phone not
expressly approved.
• Do not use the phone in high
humidity or with wet hands to
prevent electric shock or short-
circuiting.
• Be careful not to drop or damage
the phone. Rough handling can
damage the internal circuit boards
causing malfunction.
• Keep the phone out of the reach of
small children. They could hurt
themselves or others.
Do not use a mobile phone near a
heart pacemaker or any other medical
device. Radio frequency (RF) signals
may interfere with the functionality of
medical or aircraft equipment.
• Always maintain a suitable distance
between the phone and a pace-
maker if the phone is switched ON.
• Turn OFF the phone immediately if
you have any reason to suspect that
interference is taking place.
• Turn OFF the phone in health care
facilities and request permission
before using the phone near medical
equipment.
• Consult the manufacturer of any
personal medical devices (such as
hearing aids) to determine if they are
adequately shielded from external
RF signals.
General Warnings
Notes • Use only in the normal position
(applied to ear). Do not touch or
hold the antenna unless absolutely
necessary.
When not to use in or around your
vehicle
• Do not use the phone outside on a
rainy day or near any source of
water.
• Do not leave the phone in extremely
hot or cold places, such as in a
closed or open car in summer or
winter conditions, or allow it to be
exposed to direct sunlight.
• Do not use your phone near
combustible fuels or flammable
chemicals.
• It is normal for the mobile phone
to become warm when used for
extended periods.
• The temperature near the phone
should be kept between 5°C and
35°C.
Download from Www.Somanuals.com. All Manuals Search And Download.
188
189
Safety Precautions
Safety Precautions
• Keep the metal contacts on the
phone and battery clean.
• Do not use harsh chemicals,
cleaning solvents, or strong
detergents to clean the phone.
Wipe it with a soft cloth. (Avoid
using a cloth which is too dry
because it may generate static
electricity.)
• Use only Sanyo approved
accessories and batteries. To
prevent fire or damage to the
phone, do not connect incompat-
ible products.
• You should also contact a repair
shop promptly if the phone is
dropped or damaged.
• To prevent the risk of fire or injury,
never attempt to repair the equip-
ment yourself.
• Do not dispose batteries in a fire.
• Do not charge or leave the batteries
in areas subject to high tempera-
tures (near a fire, heater etc.).
• Do not short-circuit the battery. Note
that short-circuiting could occur
accidentally if a metallic object (coin,
pen, jewellery, or similar) caused a
direct connection between the + and
- terminals of the battery.
When the battery is running out of
power, a warning sign is shown and a
tone may be heard.
Leaving the battery in hot or cold
places, such as in a closed or open
car in the heat of summer or the cold
of winter will reduce the capacity and
life of the battery.
The battery should be stored at a
temperature of between 5°C and
35°C.
Battery Safety Precautions
The S750i uses a lithium ion battery.
To avoid any risk or danger, you
should observe the following precau-
tions.
• Never use an AC adaptor or battery
which is damaged or worn out.
• Do not attempt to disassemble the
battery.
• If a home telephone, TV, or radio
is turned ON, keep the phone
away from it.
• Have your phone serviced only by
authorised personnel.
Battery Capacity
Talk time
Standby time
210 hours
170 minutes
(in UMTS area)
190 minutes
(in GSM area)
(in UMTS area)
180 hours
(in GSM area)
• Use only Sanyo approved batteries,
AC adaptors and accessories
recommended for use with this
specific model. Using other batteries
or AC adaptors may cause damage
and invalidate your warranty.
• Batteries should be recycled or
disposed of correctly. They should
not be disposed of in municipal
waste.
Battery Depletion Note:
If the phone is not going to be used for
an extended length of time, remove
the battery and store it in a dry place.
You may have to recharge the battery
if it has not been used for a long
period of time.
Solving Problems
• The longer the length of talk time,
the shorter the standby time is.
• The above talk and standby times
are the average times to be
expected under ideal receiving
conditions. Total operating time
depends on charge condition,
• If a problem occurs, you should turn
OFF the phone, remove the battery
and then contact your nearest
qualified repair shop.
Download from Www.Somanuals.com. All Manuals Search And Download.
190
191
Safety Precautions
Safety Precautions
temperature, signal strength and
function settings.
• If the phone is out of the coverage
area for a long period of time, even
in the Standby display, operating
time becomes shorter.
• If you leave the phone without
finishing operations such as PIN
(PUK) entry (see p. 126), the
Standby time may become shorter.
• Do not use accessories or AC
adaptors in areas subject to more
than minimal dust and vibrations.
• Do not use accessories or AC
adaptors near water.
Accessory and AC adaptor
Safety Precautions
Specific Absorption Rate
(SAR)
Your mobile phone has been designed
and manufactured not to exceed the
limits for exposure to electromagnetic
fields recommended by the Council of
the European Union. These limits are
part of comprehensive guidelines
developed by independent scientific
organisations through periodic and
thorough evaluation of scientific
studies. The guidelines include a
substantial safety margin designed to
assure the safety of the phone user
and others and to take into account
variations in age and health, individual
sensitivities and environmental
Warnings
• Use only Sanyo approved accesso-
ries and AC adaptors.
• Disconnect the AC adaptor or
accessories from the power source
when not in use.
Solving Problems
• If a problem occurs, you should turn
OFF the phone, remove the battery
and then contact your nearest
qualified repair shop.
• You should also contact a repair
shop promptly if the phone is
dropped or damaged.
• To prevent the risk of fire or injury,
never attempt to repair equipment
yourself.
• Connect the power plug to only a
100–240 VAC outlet.
Health warning
• Do not connect or disconnect the
power cord with wet hands.
• When disconnecting the power cord
of an accessory, grasp and pull the
plug, not the cord.
• If the battery leaks and the liquid
comes into contact with your eyes,
do not rub them but immediately
wash your eyes thoroughly with
clean water and then seek immedi-
ate medical attention. Battery liquid
can cause damage to your eyesight.
• If the battery leaks and the liquid
comes into contact with your skin,
immediately wash thoroughly with
clean water. Battery liquid can
damage your skin.
Cautions
conditions. European exposure
standards for mobile phones provide
for the amount of radio frequency
electromagnetic energy absorbed by
the body when using a mobile phone
to be measured by reference to the
Specific Absorption Rate (SAR).
• The temperature near accessories
and AC adaptors should be between
5°C and 35°C.
• The humidity near accessories and
AC adaptors should be between
35% and 85%.
Download from Www.Somanuals.com. All Manuals Search And Download.
192
193
Safety Precautions
Safety Precautions
The SAR limit recommended by the
Council of the European Union for
mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged
over 10 grams of body tissue. Your
mobile phone SAR value is 0.742
watts/kilogram (0.675 watts/kilograms
according to FCC requirements). Tests
have been performed to ensure that
this limit is not exceeded even when
the phone is operating at its highest
certified power. In use however your
mobile phone may operate at less than
full power because it is designed to
use only sufficient power to communi-
cate with the network.
frequency exposure requirements. For
more information about radio
frequency exposure, please visit the
FCC website at www.fcc.gov.
• Sanyo does not guarantee the safety
of data stored in the phone nor
accept responsibility for any
FCC Notice
This device is compliant with Part 15
of the FCC (Federal Communications
Commission) regulations which is
internationally recognised.
Operation is subject to the following
conditions: (1) This device may not
cause harmful interference, and (2)
This device must accept any interfer-
ence received, including interference
that may cause undesired operation.
problems resulting from loss of data.
• Several services are dependent on
Network services and may require
purchase and installation before use.
Some services or functions may
differ depending on the type of SIM/
USIM card used in your phone.
Contact Orange for details.
Additional Notices
• Music, Java™ games, pictures, or
video images which are protected by
Copyright must not be used for any
purpose other than individual
enjoyment unless suitable permis-
sion has been obtained.
• This mobile phone is equipped with
a camera and can be used to send
or receive photographs or video
images. Be aware of Copyright
issues when using this function.
• Do not use the camera in places
where photography is restricted or
forbidden.
• The contents of this guide are
subject to change without notice.
To maintain compliance with FCC
radio frequency exposure require-
ments, body worn operations are
restricted to belt clips, or similar
accessories that contain no metallic
components and that provide at least
1.5 cm separation between the
device, including its antenna whether
extended or retracted, and the user’s
body. Use of non-Orange approved
accessories may violate FCC radio
Download from Www.Somanuals.com. All Manuals Search And Download.
194
195
Specifications
Size
108 (H) × 50 (W) × 22 (D) mm
Weight
121 g
170 minutes (in UMTS area)
190 minutes (in GSM area)
Talk Time∗
Standby Time∗
Display
210 hours (in UMTS area)
180 hours (in GSM area)
260 k colour TFT 2.4 inch
(240 × 320 dots)
Index
CMOS 1.3 megapixel
(rear camera)
CCD 310 kpixel
(front camera)
Cameras
E-GSM 900 Class 4
DCS 1800 Class 1
PCS 1900 Class 1
UMTS 2100 Class 3
Bands Supported
Max. Storage Capacity 8 MB
∗ These figures depend on the area your phone is used.
Download from Www.Somanuals.com. All Manuals Search And Download.
196
197
Index
Index
A
Calendar ... 138
E
K
ABC Search ... 60
Alarm clock ... 146
Answer phone ... 132
Anti-nuisance function (Echo Party
Voice) ... 10, 33
Call Barring ... 130
Call Diverting ... 128
Call history
Dialled call history ... 11
Missed call history ... 12
Received call history ... 12
Call Quality Alarm ... 130
Call time ... 12
Call Waiting ... 131
Caption ... 85
Changing handset’s security
code ... 126
Email ... 78
Key Light ... 110
F
L
Fixed Dialling Number ... 132
Flicker-free ... 32, 50
Flight Mode ... 116
Frame ... 48, 89
Light ... 110
Line 2 ... 115
Auto Answer
Voice call ... 129
M
Video call ... 135
Auto Flash ... 45
Auto Power ON/OFF ... 121
Media Player ... 153
Messaging ... 68
Media Album ... 82
Mute ... 10
H
Hands-free ... 13, 133
Help guide ... 158
Hold settings ... 129
B
Backlight ... 110
Backup ... 95
Chapter ... 86
N
Character input ... 16, 109
Code (handset’s security code) ... 126
Contacts ... 59
I
Name Search ... 61
Notes ... 151
Bluetooth
Image format ... 85
Index Print ... 98, 184
Infrared ... 179
Receiving Mode ... 181
Password authentication ... 178
Receiving data ... 172
Settings ... 176
O
D
Orange World ... 160
Owner Information ... 64
Bookmarks ... 160
Browser settings ... 121
Date stamp ... 49
Delivery Report ... 73, 77
Dial Note ... 152
J
Java™ Games ... 164
P
C
Digital Camera Folder ... 97
DPOF Print ... 97, 184
Paste Image ... 85
Pause Dialling ... 15
Calculator ... 148
Download from Www.Somanuals.com. All Manuals Search And Download.
198
199
Index
Index
Picture Message ... 77
PIN ... 126
Power Saving ... 110
Privacy Mode ... 62, 125
Profiles ... 13, 108
Shutter tone ... 50
Signature ... 71
SIM Toolkit ... 158
Skins ... 51
Slide activation ... 121
Snooze mode ... 147
Special effects ... 49
Speed dial ... 8, 28
Stamp ... 89
Standard text input ... 18
Standard Print ... 98, 184
Switching camera lens ... 31, 45, 136
Synchronisation ... 181
U
USB ... 185
USIM ... 126
V
vCalendar ... 168
vCard ... 168
Video call ... 26
Video List ... 85
vNote ... 168
Voice recorder ... 149
vTo Do ... 168
R
Read Report ... 73
Recording without sounds ... 50
Reducing noise ... 107
Rejecting calls ... 128
Rerecording voice ... 149
Restriction settings ... 124
W
S
T
Wallpaper ... 109, 111
WAP profiles ... 118
Whisper mode ... 10
White balance ... 32, 46
Worldclock ... 152
Saving size ... 48
T9 ... 18
Scaling ... 84
Schedule ... 139
Text entry ... 16
Text Message ... 68
To Do ... 143
Transferring the phone data ... 175
Transmitting the SD card data (USB
Storage Mode) ... 185
SD (Memory) card ... 92
Selecting network ... 117
Self-timer ... 47
Service Dialling Numbers ... 133
Setting time & date ... 112
Shooting time ... 47
Z
Zooming ... 31
Download from Www.Somanuals.com. All Manuals Search And Download.
200
201
Powered by JBlend™
JBlend and all JBlend-
based trademarks and
logos are trademarks or
registered trademarks of
Aplix Corporation in Japan
and other countries.
(96927260.8), 1 010 057
(98903671.0), 1 018 069
Patents and copyright
(98950708.2); Republic of Korea
Pat. Nos. KR201211B1 and
KR226206B1. People’s Republic of
China Pat. Application Nos.
98802801.8, 98809472.X and
96196739.0; Mexico Pat. No.
208141; Russian Federation Pat.
No. 2206118; and additional patents
are pending worldwide.
This product utilizes iType
and Scaleable type outlines
licensed from Monotype
Imaging Inc.
Copyright © 2004
Monotype Imaging Inc. All
rights reserved.
Openwave, the Openwave
logo and the family of terms
carrying the “Openwave”
prefix are trademarks of
Openwave Systems Inc. All
other trademarks and
registered trademarks are
the properties of their
respective owners.
Licensed by QUALCOMM Incorpo-
rated under one or more of the
following United States Patents and/or
their counterparts in other nations:
• T9 Text Input is licensed under one
or more of the following: U.S. Pat.
Nos. 5,187,480, 5,818,437,
5,945,928, 5,953,541, 6,011,554,
6,286,064, 6,307,548, 6,307,549,
and 6,636,162, 6,646,573;
Australian Pat. Nos. 727539,
746674, and 747901; Canadian Pat.
Nos. 1,331,057, 2,302,595, and
2,227,904; Japan Pat. No.
®
• T9 Text Input is a registered
Copyright © 2004 Openwave Systems
Inc. All rights reserved.
trademark of Tegic Communications
Inc.
4,901,307
5,504,773
5,109,390
5,535,239
5,267,262
5,600,754
5,416,797
5,490,165
5,101,501
5,511,073
5,267,261
5,568,483
5,414,796
5,659,569
5,056,109
5,506,865
5,228,054
5,544,196
5,337,338
5,657,420
5,710,784
• End User is granted no rights of
ownership or any other proprietary
rights in or to the Documentation
and Tegic Product or any other
software or technology of Tegic. End
User acknowledges that all
The “RSA Secure” AND
“Genuine RSA” logos are
trademarks of RSA Data
Security, Inc.
5,778,338
Java™ and all Java-based
marks are trademarks or
registered trademarks of
Sun Microsystems, Inc. in
the U.S. and other
3532780, 3492981; United Kingdom
Pat. No. 2238414B; Hong Kong
Standard Pat. No. HK1010924;
Republic of Singapore Pat. No.
51383, 66959, and 71979;
ownership of and proprietary rights
in and to the Documentation and
Tegic Product are vested in Tegic.
End User shall not modify, reverse
engineer, decompile or disassemble
the Tegic Product, or otherwise
®
countries.
European Pat. Nos. 0 842 463
Download from Www.Somanuals.com. All Manuals Search And Download.
202
203
attempt to obtain source code for
the Tegic Product. The Documenta-
tion and Tegic Product are protected
by the copyright laws of the United
States and international copyright
treaties.
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Your SANYO product is designed and manufactured with high
quality materials and components which can be recycled and
reused.
This symbol means that electrical and electronic equipment, at their
end-of-life, should be disposed of separately from your household waste.
Copyright © 2004 Tegic Communi-
cations, Inc., All rights reserved.
Please dispose of this equipment at your local community waste
collection/recycling centre.
Intellisync and the
Intellisync logo are
trademarks of Intellisync
Corporation that may be
registered in some
jurisdictions.
In the European Union there are separate collection systems for used
electrical and electronic products.
Please help us to conserve the environment we live in!
PacketVideo, PV, and pvPlayer are
trademarks or registered trademarks
of PacketVideo Corporation. All other
trademarks are the property of their
respective owners. The names of
actual companies and products
mentioned herein may be the
trademarks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
204
205
|